What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 87 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 87 of 446

5340-14-539-2604
Mounting Bracket

145392604
T632G1001222: RNCC: 3 | RNVC: 2

17 Dec 2003

5340-14-380-0510
Webbing Strap

143800510
005010050P: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-552-0738
Caster Set

145520738
ISO-210SUTM: RNCC: 3 | RNVC: 2

23 Nov 2006

5340-14-416-7961
Electrical Lead

144167961
JVA-T423-06: RNCC: 3 | RNVC: 2
JVAT423-06: RNCC: 5 | RNVC: 2

25 Jun 1987

5340-14-320-7821
Loop Clamp

143207821
15260M14M: RNCC: 3 | RNVC: 2
620-854-636-0: RNCC: 5 | RNVC: 2
620-854-636-0: RNCC: 5 | RNVC: 2
15260M14M: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-413-1001
Anchor Strap

144131001
192-10418-99: RNCC: 3 | RNVC: 2
192-116-63: RNCC: 5 | RNVC: 2
U4011861010: RNCC: 5 | RNVC: 2
U4011861010: RNCC: 5 | RNVC: 2

26 Nov 1986

5340-14-549-8486
Mounting Bracket

145498486
2092124-001: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-344-1513
Flush Catch Claw

143441513
129 061 11: RNCC: 3 | RNVC: 2
911-78: RNCC: 5 | RNVC: 2
0193875Y00: RNCC: 5 | RNVC: 2

10 Aug 1977

5340-14-494-0531
Butt Hinge

144940531
107098-10: RNCC: 3 | RNVC: 2
10709810: RNCC: 5 | RNVC: 2
F300 0T 015 2036: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-505-3771
Lock Bolt

145053771
1021210119: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-514-6419
Mounting Plate

145146419
5010166154: RNCC: 3 | RNVC: 2

3 Jun 1999

5340-14-402-6388
Angle Bracket

144026388
4108-54: RNCC: 3 | RNVC: 2
605637: RNCC: 5 | RNVC: 2

19 Jul 1985

5340-14-287-9036
Retaining Strap

142879036
5000000185: RNCC: 3 | RNVC: 2
5000000185: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-473-1033
Cover Strip

144731033
633857: RNCC: 3 | RNVC: 2
633857: RNCC: 5 | RNVC: 9

7 Dec 1994

5340-14-542-2996
Mounting Bracket

145422996
970644208: RNCC: 3 | RNVC: 2
970644208: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-521-5341
Butt Hinge

145215341
748: RNCC: 3 | RNVC: 2

9 Aug 2000

5340-14-530-6883
Cover Strip

145306883
T524A2001506: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-362-2766
Angle Bracket

143622766
330A24-2074-57: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-465-8616
Mounting Bracket

144658616
5010099030: RNCC: 3 | RNVC: 2

14 Oct 1993

5340-14-544-5331
Mounting Bracket

145445331
301018032002A: RNCC: 3 | RNVC: 9

9 Feb 2005

5340-14-538-9784
Loop Clamp

145389784
NGM0053824309514: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-341-4262
Butt Hinge

143414262
302: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-372-2577
Retaining Clip

143722577
190400060: RNCC: 3 | RNVC: 2
7701013705: RNCC: 5 | RNVC: 2
7701013705: RNCC: 5 | RNVC: 9

1 Sep 1981

5340-14-306-2832
Rim Lock

143062832
214D: RNCC: 3 | RNVC: 9
2055D: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-448-1337
Mounting Bracket

144481337
021134090201: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-447-9253
Permanent Magnet

144479253
2792A1-5D: RNCC: 3 | RNVC: 2

6 Jun 1991

5340-14-458-1141
Clamping Catch

144581141
16798233: RNCC: 3 | RNVC: 2
16798233: RNCC: 3 | RNVC: 9

8 Oct 1992

5340-14-524-0675
Detent Plunger

145240675
8025072E00: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-14-413-1756
Retaining Strap

144131756
ST406M52P521: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-550-9192
Angle Bracket

145509192
RA1B702206581N1: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-511-9995
Loop Clamp

145119995
8588943: RNCC: 3 | RNVC: 2
0052835: RNCC: 5 | RNVC: 2
8588943: RNCC: 5 | RNVC: 9

2 Feb 1999

5340-14-533-2253
Expansion Plug

145332253
401415MA: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-551-5368
Door Closer

145515368
09464: RNCC: 3 | RNVC: 2

28 Sep 2006

5340-14-479-9163
Clamping Catch

144799163
700068: RNCC: 3 | RNVC: 2

14 Feb 1996

5340-14-428-8881
Clamping Catch

144288881
355A58-3046-02: RNCC: 3 | RNVC: 2

22 Dec 1988

5340-14-376-0109
Sash Pole

143760109
JVCT03-01-00: RNCC: 3 | RNVC: 2

30 Mar 1982

5340-14-479-6410
Retaining Strap

144796410
79244-159: RNCC: 3 | RNVC: 2

26 Jan 1996

5340-14-434-0115
Retaining Strap

144340115
578201: RNCC: 3 | RNVC: 2
85-693-8789: RNCC: 6 | RNVC: 9

29 Aug 1989

5340-14-434-8692
Mounting Plate

144348692
21-84-02M5-64: RNCC: 3 | RNVC: 2

4 Oct 1989

5340-14-473-4121
Mounting Plate

144734121
332A85-0107-21: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-485-2009
Loop Clamp

144852009
ST159-2M831-81P28: RNCC: 3 | RNVC: 2

10 Jan 1997

5340-14-473-6659
Mounting Plate

144736659
332A63-4301-00: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-546-5821
Bumper

145465821
254-011-15-054: RNCC: 3 | RNVC: 2

20 Jul 2005

5340-14-483-4934
Cover Strip

144834934
332A58-1558-24: RNCC: 3 | RNVC: 2

14 Sep 1996

5340-14-318-3052
Mending Plate

143183052
26-720021-25: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-377-9391
Control Rod

143779391
710016-20060: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-254-3124
Angle Bracket

142543124
3130S78-10-521-1: RNCC: 3 | RNVC: 2
SE3130S78-10-521-1: RNCC: 5 | RNVC: 2
SE3130S78-10-521-1: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-379-0618
Cover Strip

143790618
3160S25-29-079-51: RNCC: 3 | RNVC: 2
3160S-25-29-079-51: RNCC: 5 | RNVC: 2
85-800-4211: RNCC: 6 | RNVC: 9

6 Sep 1982

5340-14-467-9819
Arched Cushion

144679819
MAT169-0152F6: RNCC: 3 | RNVC: 2

2 Feb 1994

5340-14-327-1589
Door Hook

143271589
J36-130-80LAIT0N: RNCC: 2 | RNVC: 2
C2-80LAIT0N: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-352-8914
Bumper

143528914
NO PRIMARY REF14-352-8914: RNCC: 3 | RNVC: 2
82-23-002: RNCC: 5 | RNVC: 9
8223002: RNCC: 5 | RNVC: 9

14 Nov 1978

5340-14-389-5375
Bridge Clamp

143895375
365A81-0199-00: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-475-6067
Handwheel

144756067
892-52-0-026-0: RNCC: 3 | RNVC: 2
85-693-7163: RNCC: 6 | RNVC: 9

19 Apr 1995

5340-14-293-8918
Bumper

142938918
EQDIV43-06-1: RNCC: 3 | RNVC: 2
EQDIV43-06REP1: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-345-0906
Rod End Clevis

143450906
611-102-040-0: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-031-2370
Butt Hinge

140312370
400448: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-358-9112
Loop Clamp

143589112
12331070: RNCC: 3 | RNVC: 2
PF12A3N7: RNCC: 5 | RNVC: 2
PF12A3N7: RNCC: 5 | RNVC: 9
PF12A3N7: RNCC: 5 | RNVC: 9

7 Sep 1979

5340-14-424-3201
Runner

144243201
39534970: RNCC: 3 | RNVC: 2
39534970: RNCC: 5 | RNVC: 9

19 May 1988

5340-14-524-6504
Angle Bracket

145246504
45153342: RNCC: 3 | RNVC: 2

2 Apr 2001

5340-14-363-0619
Retaining Strap

143630619
573905331: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-14-545-0707
Mounting Bracket

145450707
C0138C800: RNCC: 3 | RNVC: 2

16 Mar 2005

5340-14-444-1661
Retaining Strap

144441661
PM1A606206003: RNCC: 3 | RNVC: 2
PM1A606206003: RNCC: 5 | RNVC: 2

18 Dec 1990

5340-14-461-2831
Mounting Bracket

144612831
5000655503: RNCC: 3 | RNVC: 2
89287529: RNCC: 5 | RNVC: 2

3 Mar 1993

5340-14-483-7585
Access Cover

144837585
789942: RNCC: 3 | RNVC: 2

3 Oct 1996

5340-14-516-4276
Mounting Bracket

145164276
TA5044P001: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-381-3519
Butt Hinge

143813519
0000662407: RNCC: 3 | RNVC: 2
662407: RNCC: 5 | RNVC: 9
0000662407: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-512-9485
Mounting Bracket

145129485
94050301: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-402-6734
Rod End Clevis

144026734
BEL1013: RNCC: 3 | RNVC: 2

19 Jul 1985

5340-14-384-4816
Bow Handle

143844816
20179: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-395-3604
Rim Lock

143953604
5802DT: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-516-4297
Synchro Clamp

145164297
TA5044P005: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-501-6691
Access Cover

145016691
45283404: RNCC: 3 | RNVC: 2
45283404: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-536-8608
Utility Access Door

145368608
RPL501-710-520A1: RNCC: 3 | RNVC: 2

17 Sep 2003

5340-14-406-2034
Access Cover

144062034
BAZ3488: RNCC: 3 | RNVC: 2
30-0892: RNCC: 5 | RNVC: 2

8 Jan 1986

5340-14-537-9138
Mounting Bracket

145379138
341A65-7436-47: RNCC: 3 | RNVC: 2

3 Dec 2003

5340-14-253-4196
Rod End Clevis

142534196
321A65-4080-00: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-362-6249
Rod End Clevis

143626249
EA1M177-35-811: RNCC: 3 | RNVC: 2

19 Mar 1980

5340-14-464-0654
Runner

144640654
12115010110/330: RNCC: 3 | RNVC: 2
121150-330: RNCC: 5 | RNVC: 2

15 Jul 1993

5340-14-393-8767
Mounting Plate

143938767
NO PRIMARY REF14-393-8767: RNCC: 3 | RNVC: 2
980319: RNCC: 5 | RNVC: 9

21 Mar 1996

5340-14-432-1343
Pipe Hanger

144321343
160G742002-04: RNCC: 3 | RNVC: 2

24 May 1989

5340-14-353-6808
Arched Cushion

143536808
650-403-230-0: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-552-2857
Mounting Bracket

145522857
26053795-2: RNCC: 3 | RNVC: 2

8 Dec 2006

5340-14-539-5939
Lock Key

145395939
23-100-02-CLE: RNCC: 3 | RNVC: 2
SYQ4689: RNCC: 5 | RNVC: 2

22 Jan 2004

5340-14-411-3438
Mounting Plate

144113438
R4P702-517: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-429-5989
Synchro Clamp

144295989
GXF145: RNCC: 3 | RNVC: 2
444-01060-002: RNCC: 3 | RNVC: 2
GXF145: RNCC: 3 | RNVC: 2

1 Feb 1989

5340-14-389-8317
Angle Bracket

143898317
837047/002: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-447-6349
Rod End Clevis

144476349
45819673: RNCC: 3 | RNVC: 2
215149: RNCC: 3 | RNVC: 2
D753: RNCC: 5 | RNVC: 2
4-581967-3: RNCC: 5 | RNVC: 9
F300 0T 002 9933: RNCC: 6 | RNVC: 9

29 May 1991

5340-14-370-9855
Rod End Clevis

143709855
C69757-1: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-394-7235
Rim Lock Set

143947235
NO PRIMARY REF14-394-7235: RNCC: 3 | RNVC: 2
6600-04FE020: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-544-1522
Loop Clamp

145441522
05317-01700: RNCC: 3 | RNVC: 2

5 Jan 2005

5340-14-452-1804
Protection Bellows

144521804
A03037-10-6040P010: RNCC: 3 | RNVC: 2

18 Dec 1991

5340-14-477-8293
Access Cover

144778293
29-56505-304-01: RNCC: 3 | RNVC: 2
29-56505-304-01: RNCC: 5 | RNVC: 9

27 Sep 1995

5340-14-541-3507
Mounting Bracket

145413507
B100-200-000A: RNCC: 3 | RNVC: 2

29 May 2004

5340-14-347-9388
Rim Lock

143479388
0996011300: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-504-0857
Loop Clamp

145040857
38214829: RNCC: 3 | RNVC: 2
38014508: RNCC: 5 | RNVC: 2

5 Feb 1998

5340-14-482-9274
Cover Strip

144829274
DS1P202732361: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-508-7573
Angle Bracket

145087573
46234167: RNCC: 3 | RNVC: 2
4773420840: RNCC: 3 | RNVC: 2
46234167: RNCC: 5 | RNVC: 9

30 Sep 1998

5340-14-501-6967
Angle Bracket

145016967
45280088: RNCC: 3 | RNVC: 2
45280088: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-455-7390
Mounting Plate

144557390
4772212100: RNCC: 3 | RNVC: 2
5044546: RNCC: 5 | RNVC: 9

11 Jun 1992

5340-14-520-9039
Mounting Bracket

145209039
10466655: RNCC: 3 | RNVC: 2

21 Jun 2000

5340-14-543-3741
Butt Hinge

145433741
213721: RNCC: 3 | RNVC: 2

23 Oct 2004

5340-14-516-1483
Mounting Bracket

145161483
20858084: RNCC: 3 | RNVC: 2
20858084: RNCC: 3 | RNVC: 9

13 Sep 1999

5340-14-357-5769
Mending Plate

143575769
0249920800: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-555-8008
Mounting Plate

145558008
0164447310: RNCC: 3 | RNVC: 2

14 Dec 2007

5340-14-534-2838
Mounting Bracket

145342838
10363758: RNCC: 3 | RNVC: 2

19 Mar 2003

5340-14-402-0722
Bumper

144020722
219744: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-548-1507
Mounting Plate

145481507
10603113: RNCC: 3 | RNVC: 2

12 Dec 2005

5340-14-525-3426
Bumper

145253426
C56.11280: RNCC: 3 | RNVC: 2
SYB2961: RNCC: 5 | RNVC: 2

28 May 2001

5340-14-222-6977
Loop Clamp

142226977
424009: RNCC: 3 | RNVC: 2
0254640100: RNCC: 5 | RNVC: 2
1630: RNCC: 5 | RNVC: 2
DBA424009: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-544-3556
Mounting Plate

145443556
S257A1018121: RNCC: 3 | RNVC: 2

24 Jan 2005

5340-14-510-7506
Retaining Bail

145107506
8003701L00: RNCC: 3 | RNVC: 2

10 Nov 1998

5340-14-524-3506
Mounting Plate

145243506
SD001PD010239: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-448-7794
Mounting Bracket

144487794
253941: RNCC: 3 | RNVC: 2
253941: RNCC: 5 | RNVC: 9

10 Jul 1991

5340-14-501-8906
Mounting Bracket

145018906
38756483: RNCC: 3 | RNVC: 2
38756483: RNCC: 5 | RNVC: 9

19 Nov 1997

5340-14-533-4305
Mounting Bracket

145334305
F1264411: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-477-1085
Bumper

144771085
1037970A00: RNCC: 3 | RNVC: 2

26 Jul 1995

5340-14-246-8154
Webbing Strap

142468154
H90J6000C: RNCC: 3 | RNVC: 2
530473: RNCC: 5 | RNVC: 2
H90J6000C: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-403-9128
Loop Clamp

144039128
409510000000: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-552-8079
Support Hook

145528079
RA1B219102501U2: RNCC: 3 | RNVC: 2

5 Feb 2007

5340-14-529-3287
Handwheel

145293287
A1255764: RNCC: 3 | RNVC: 2

21 Mar 2002

5340-14-502-8034
Compression Cup

145028034
8T1580: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-372-1141
Retaining Strap

143721141
BS671: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-503-3345
Padlock

145033345
CADENAS ARTICULE AVEC CLE: RNCC: 3 | RNVC: 2
995 010 010 000: RNCC: 6 | RNVC: 9

12 Jan 1998

5340-14-499-5549
Mounting Plate

144995549
E69053909: RNCC: 3 | RNVC: 2
F300 0T 023 5265: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-459-1557
Mounting Plate

144591557
16559665: RNCC: 3 | RNVC: 2
16559665: RNCC: 5 | RNVC: 9

19 Nov 1992

5340-14-318-1142
Loop Clamp

143181142
79020997: RNCC: 3 | RNVC: 2
79020997: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-518-1990
Angle Bracket

145181990
443437: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-550-9199
Angle Bracket

145509199
RA1B702606171A1: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-454-0556
Mounting Plate

144540556
16130040: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-466-1822
Mounting Bracket

144661822
165832: RNCC: 3 | RNVC: 2
89170097: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-405-0351
Door Closer

144050351
28810: RNCC: 3 | RNVC: 9

20 Nov 1985

5340-14-453-1006
Angle Bracket

144531006
15110180J: RNCC: 3 | RNVC: 2

5 Feb 1992

5340-14-483-7855
Shelf Bracket

144837855
POT01PD000018: RNCC: 3 | RNVC: 9

3 Oct 1996

5340-14-552-0272
Mounting Plate

145520272
0249922400: RNCC: 3 | RNVC: 2

21 Nov 2006

5340-14-523-2471
Angle Bracket

145232471
RA1M701636323: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-517-0145
Pipe Hanger

145170145
RA1M709314750: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-455-2673
Handwheel

144552673
MAT137-0017F10: RNCC: 3 | RNVC: 2

20 May 1992

5340-14-455-3133
Clamping Catch

144553133
IF164-950: RNCC: 3 | RNVC: 9

21 May 1992

5340-14-530-6841
Cover Strip

145306841
T524A2001501: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-411-7130
Mounting Plate

144117130
CPA133068: RNCC: 3 | RNVC: 2
89165847: RNCC: 5 | RNVC: 2

27 Aug 1986

5340-14-459-6646
Arched Cushion

144596646
MAT169-0012F19DE6: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-514-4739
Shelf Bracket

145144739
45219804: RNCC: 3 | RNVC: 2
45219804: RNCC: 5 | RNVC: 2
IF-192-0462: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-319-4459
Access Cover

143194459
NO PRIMARY REF14-319-4459: RNCC: 3 | RNVC: 2
600046: RNCC: 5 | RNVC: 9
600046: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-525-0445
Expansion Plug

145250445
HS2912: RNCC: 3 | RNVC: 2
SYB2888: RNCC: 5 | RNVC: 2
HC1/4GAZ-CO-45HRC-ACIERCADMIE: RNCC: 5 | RNVC: 2

16 May 2001

5340-14-224-0219
Handwheel

142240219
GSM137-001F18DET3SANSB0ULEAS10G: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-468-8096
Plug Button

144688096
160R742102-04: RNCC: 3 | RNVC: 2

23 Mar 1994

5340-14-482-5189
Access Cover

144825189
CCN301-420-415A2: RNCC: 3 | RNVC: 2

11 Jul 1996

5340-14-478-9697
Rod End Clevis

144789697
80-301051: RNCC: 3 | RNVC: 2

4 Dec 1995

5340-14-524-0350
Rim Lock

145240350
E3-14-15: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-14-386-8693
Mending Plate

143868693
0625-504-530A: RNCC: 3 | RNVC: 2
85-692-0298: RNCC: 6 | RNVC: 9
85-692-0299: RNCC: 6 | RNVC: 9

24 Aug 1983

5340-14-430-7463
Rod End Clevis

144307463
PM1A764514503: RNCC: 3 | RNVC: 2
PM1A764514503: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-521-8925
Retaining Strap

145218925
114.0004.000.02: RNCC: 3 | RNVC: 2

20 Sep 2000

5340-14-317-9072
Mending Plate

143179072
40284: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-341-0868
Rod End Clevis

143410868
16411531: RNCC: 3 | RNVC: 2
16411531: RNCC: 3 | RNVC: 9

16 Mar 1977

5340-14-462-8998
Permanent Magnet

144628998
ZM0000017: RNCC: 3 | RNVC: 2
89470008: RNCC: 5 | RNVC: 2

5 May 1993

5340-14-535-9663
Mounting Bracket

145359663
10275763: RNCC: 3 | RNVC: 2

2 Jul 2003

5340-14-439-6886
Mounting Bracket

144396886
16295635: RNCC: 3 | RNVC: 2
16295635: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-443-0632
Cover Strip

144430632
PM1A228003123: RNCC: 3 | RNVC: 2
PM1A228003123: RNCC: 5 | RNVC: 2

7 Nov 1990

5340-14-540-4228
Retaining Strap

145404228
36001642: RNCC: 3 | RNVC: 2

25 Mar 2004

5340-14-339-7760
Bow Handle

143397760
15155978: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-448-0819
Strap Hinge

144480819
PM1A237224001: RNCC: 3 | RNVC: 2
PM1A237224001: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-444-2523
Bumper

144442523
503B357: RNCC: 3 | RNVC: 2

18 Dec 1990

5340-14-432-2467
Corner Brace

144322467
A0H505R24: RNCC: 3 | RNVC: 2

31 May 1989

5340-14-460-3251
Mounting Plate

144603251
TNS1A1109A: RNCC: 3 | RNVC: 2

21 Jan 1993

5340-14-546-5388
Cushioning Pad

145465388
14100004114: RNCC: 3 | RNVC: 2

18 Jul 2005

5340-14-545-1128
Access Cover

145451128
TS143854Y00: RNCC: 3 | RNVC: 2

18 Mar 2005

5340-14-311-8455
Access Cover

143118455
0064490660: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-437-0950
Rod End Clevis

144370950
DZK4D5J87: RNCC: 3 | RNVC: 2

17 Jan 1990

5340-14-368-0997
Anchor Strap

143680997
129552: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-399-9686
Anchor Strap

143999686
230092: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-454-2331
Angle Bracket

144542331
70902J132927: RNCC: 3 | RNVC: 2
132927: RNCC: 5 | RNVC: 2
5044914: RNCC: 5 | RNVC: 9

26 Mar 1992

5340-14-336-4936
Webbing Strap

143364936
190422: RNCC: 3 | RNVC: 2

14 Aug 1976

5340-14-450-2127
Angle Bracket

144502127
5000987757: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-478-0760
Support Hook

144780760
M418610A9231A01: RNCC: 3 | RNVC: 2

11 Oct 1995

5340-14-466-1784
Retaining Strap

144661784
166045: RNCC: 3 | RNVC: 2
89170156: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-449-3171
Runner

144493171
551A005: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-544-9036
Access Cover

145449036
ALT422KO005: RNCC: 3 | RNVC: 2

2 Mar 2005

5340-14-536-4499
Webbing Strap

145364499
ARO9013-25: RNCC: 3 | RNVC: 2

22 Aug 2003

5340-14-426-1431
Butt Hinge

144261431
M223B00033: RNCC: 3 | RNVC: 2
M223-33: RNCC: 5 | RNVC: 9
F300 0T 006 1273: RNCC: 6 | RNVC: 9

4 Aug 1988

5340-14-457-3489
Butt Hinge

144573489
2CH01BR: RNCC: 3 | RNVC: 2
64551: RNCC: 5 | RNVC: 2
5044352: RNCC: 5 | RNVC: 9

27 Aug 1992

5340-14-332-4523
Rim Lock Set

143324523
NO PRIMARY REF14-332-4523: RNCC: 3 | RNVC: 2
1700-03-1729B1MN008: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-453-7529
Mounting Bracket

144537529
2085-05-014: RNCC: 3 | RNVC: 2
89411697: RNCC: 5 | RNVC: 9

5 Mar 1992

5340-14-447-4755
Loop Clamp

144474755
BK15A60004F21BDF16REP1A4: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-452-1132
Mounting Bracket

144521132
136-81-11002: RNCC: 3 | RNVC: 9
89402798: RNCC: 5 | RNVC: 2

18 Dec 1991

5340-14-420-8660
Mounting Plate

144208660
1921-17: RNCC: 3 | RNVC: 2
9350055680: RNCC: 5 | RNVC: 2

16 Dec 1987

5340-14-383-9700
Mounting Plate

143839700
091019J: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-530-5397
Bumper

145305397
96128896: RNCC: 3 | RNVC: 2

18 Jun 2002

5340-14-551-6654
Expansion Shield

145516654
CMI369: RNCC: 3 | RNVC: 2

12 Oct 2006

5340-14-345-2705
Rod End Clevis

143452705
FD1B792-020: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-383-1345
Rod End Clevis

143831345
TAM101-004: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-408-7438
Clamping Catch

144087438
GE.40-GIP: RNCC: 3 | RNVC: 2
0228091T00: RNCC: 5 | RNVC: 2
GE40GIP: RNCC: 5 | RNVC: 2

2 Apr 1986

5340-14-222-6993
Loop Clamp

142226993
61FP12: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-456-5915
Mounting Bracket

144565915
234259E: RNCC: 3 | RNVC: 2

9 Jul 1992

5340-14-370-9064
Access Cover

143709064
1850-21: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-430-6486
Tubular Fairlead

144306486
PM1A573290122: RNCC: 3 | RNVC: 2
PM1A573290122: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-370-5340
Loop Clamp

143705340
16324380: RNCC: 3 | RNVC: 2
16324380: RNCC: 5 | RNVC: 2
16324380: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-535-2629
Angle Bracket

145352629
RA1M702436281N1: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-456-0374
Clamping Catch

144560374
G0D534ZI: RNCC: 3 | RNVC: 2

17 Jun 1992

5340-14-506-0292
Runner

145060292
RA1M312319170N1: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-14-527-3795
Mounting Bracket

145273795
H145050W: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-403-9285
Angle Bracket

144039285
32836: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-548-1083
Angle Bracket

145481083
RA1A702506057: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-503-8290
Loop Clamp

145038290
544530: RNCC: 3 | RNVC: 2

30 Jan 1998

5340-14-528-1668
Mounting Plate

145281668
3526AA01314: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-14-523-9236
Angle Bracket

145239236
4076131: RNCC: 3 | RNVC: 2
4076131: RNCC: 5 | RNVC: 2

14 Feb 2001

5340-14-468-4941
Access Cover

144684941
35274069: RNCC: 3 | RNVC: 2

3 Mar 1994

5340-14-505-0132
Rod End Clevis

145050132
120250: RNCC: 3 | RNVC: 2
5000450665: RNCC: 5 | RNVC: 2

11 Mar 1998

5340-14-440-6392
Mounting Bracket

144406392
16008411: RNCC: 3 | RNVC: 2

18 Jul 1990

5340-14-545-0451
Mounting Bracket

145450451
04D08: RNCC: 3 | RNVC: 2

16 Mar 2005

5340-14-527-2658
Bumper

145272658
94GR23: RNCC: 3 | RNVC: 2

17 Oct 2001

5340-14-230-5306
Loop Clamp

142305306
0205990510: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-549-1601
Mounting Bracket

145491601
5000138639: RNCC: 3 | RNVC: 2

6 Mar 2006

5340-14-235-2048
Bow Handle

142352048
35648: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-457-6610
Webbing Strap

144576610
B3000-CAT5-LG5M: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-462-2701
Loop Clamp

144622701
C69678: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-14-484-2502
Angle Bracket

144842502
0390750680: RNCC: 3 | RNVC: 2

31 Oct 1996

5340-14-448-6186
Mounting Bracket

144486186
20255312: RNCC: 3 | RNVC: 2
20255312: RNCC: 5 | RNVC: 2

4 Jul 1991

5340-14-518-0552
Mounting Plate

145180552
5010118252: RNCC: 3 | RNVC: 2

25 Jan 2000

5340-14-551-5067
Angle Bracket

145515067
RA1B701566845: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-347-2742
Compression Cup

143472742
MX77REP13: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-14-553-1629
Mounting Bracket

145531629
0249860340: RNCC: 3 | RNVC: 2

8 Mar 2007

5340-14-445-6770
Buckle

144456770
BI0305: RNCC: 3 | RNVC: 2
BI0305: RNCC: 5 | RNVC: 2

20 Feb 1991

5340-14-518-1508
Retaining Clip

145181508
5003077007: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-532-3823
Mounting Bracket

145323823
RA1M812750121N1: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-422-1734
Quick Release Pin

144221734
ST443M12P45: RNCC: 3 | RNVC: 2
BAB94040: RNCC: 3 | RNVC: 2
80X211A006: RNCC: 5 | RNVC: 2
ST443M12P45A: RNCC: 5 | RNVC: 2

24 Feb 1988

5340-14-534-1880
Rod End Connector

145341880
NNM0010036900198: RNCC: 2 | RNVC: 2

14 Mar 2003

5340-14-424-9977
Mounting Bracket

144249977
0185107260: RNCC: 3 | RNVC: 2
89414688: RNCC: 5 | RNVC: 2

16 Jun 1988

5340-14-549-8332
Mounting Plate

145498332
2092766: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-383-3660
Webbing Strap

143833660
4770216230: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-497-9009
Angle Bracket

144979009
0315770850: RNCC: 3 | RNVC: 2

22 Oct 1997

5340-14-441-3853
Loop Clamp

144413853
DA1D201747510: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-278-6958
Synchro Clamp

142786958
70768097: RNCC: 3 | RNVC: 2
70768097: RNCC: 5 | RNVC: 9
768097: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-389-9394
Rod End Clevis

143899394
4-000011-000055: RNCC: 3 | RNVC: 2
4-011-0055: RNCC: 5 | RNVC: 2

26 Jan 1984

5340-14-410-3180
Pipe Hanger

144103180
332A75-1609-20: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-14-350-1888
Door Handle

143501888
NO PRIMARY REF14-350-1888: RNCC: 3 | RNVC: 2
18500-01: RNCC: 5 | RNVC: 9

14 Jun 1978

5340-14-276-3411
Bridge Clamp

142763411
39-0004: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-494-1844
Access Cover

144941844
NO PRIMARY REF14-494-1844: RNCC: 3 | RNVC: 2
1060149: RNCC: 5 | RNVC: 9
F300 0T 015 9222: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-542-0747
Turnbuckle Body

145420747
122-12: RNCC: 3 | RNVC: 2

2 Jul 2004

5340-14-288-7330
Retaining Strap

142887330
02-18-02-70: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-445-8005
Retaining Bail

144458005
FSP3-63999: RNCC: 3 | RNVC: 2
FSP9-63775REP395: RNCC: 5 | RNVC: 2

26 Feb 1991

5340-14-553-3357
Access Cover

145533357
0249890130: RNCC: 3 | RNVC: 2

26 Mar 2007

5340-14-366-9647
Mounting Bracket

143669647
24C1773: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-517-5866
Angle Bracket

145175866
RA1M701206513N1: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-513-8034
Access Cover

145138034
DE21770: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-555-5548
Access Cover

145555548
10659539001: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-14-457-2848
Access Cover

144572848
1701250: RNCC: 3 | RNVC: 2

20 Aug 1992

5340-14-550-4010
Access Cover

145504010
2237562120: RNCC: 3 | RNVC: 2

19 Jun 2006

5340-14-389-6643
Access Cover

143896643
707646REP4: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-486-0165
Mounting Bracket

144860165
P45140: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-460-8353
Anchor Strap

144608353
5000916830: RNCC: 3 | RNVC: 2

10 Feb 1993

5340-14-485-2196
Plug Button

144852196
260370: RNCC: 3 | RNVC: 2
F300 0T 023 1029: RNCC: 5 | RNVC: 9

10 Jan 1997

5340-14-483-7957
Access Cover

144837957
1114272X00: RNCC: 3 | RNVC: 2

3 Oct 1996

5340-14-313-7501
Access Cover

143137501
0064771740: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-540-5555
Access Cover

145405555
GA024489Y02: RNCC: 3 | RNVC: 2

3 Apr 2004

5340-14-441-9329
Access Cover

144419329
005062010162: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-416-4738
Access Cover

144164738
533254: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-14-437-7649
Access Cover

144377649
1286149: RNCC: 3 | RNVC: 2
1286149: RNCC: 5 | RNVC: 2

19 Feb 1990

5340-14-384-6542
Access Cover

143846542
16762042: RNCC: 3 | RNVC: 2
16762042: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-537-1471
Access Cover

145371471
L7000T200H11400: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-14-433-6726
Mounting Bracket

144336726
BFP00584: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-521-0364
Access Cover

145210364
4655433A: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-14-439-2923
Cover Strip

144392923
DA2C264931040: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-357-9301
Access Cover

143579301
TH20A4607: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-14-484-7456
Blank Panel

144847456
2501548D00: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-529-9168
Utility Access Door

145299168
RLSF00001A: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-534-2913
Access Cover

145342913
10674206000: RNCC: 3 | RNVC: 2

19 Mar 2003

5340-14-533-2613
Access Cover

145332613
V116144A: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-460-9863
Mounting Bracket

144609863
SHS1A0515A: RNCC: 3 | RNVC: 2

17 Feb 1993

5340-14-402-0305
Rod End Clevis

144020305
BEL1306: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-432-1073
Mounting Plate

144321073
239104: RNCC: 3 | RNVC: 2

24 May 1989

5340-14-483-4377
Mounting Bracket

144834377
F125409: RNCC: 3 | RNVC: 2

12 Sep 1996

5340-14-536-7170
Utility Access Door

145367170
46504846: RNCC: 3 | RNVC: 2

15 Sep 2003

5340-14-550-3276
Mounting Bracket

145503276
5010631906: RNCC: 3 | RNVC: 2

15 Jun 2006

5340-14-303-5834
Access Cover

143035834
0264720640: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-407-5262
Bumper

144075262
22395415: RNCC: 3 | RNVC: 2
22395415: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-14-475-0872
Bridge Clamp

144750872
1078409K00: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-306-4714
Access Cover

143064714
652743: RNCC: 3 | RNVC: 2
652743: RNCC: 5 | RNVC: 2
652743: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-530-5980
Mounting Plate

145305980
7605-029: RNCC: 3 | RNVC: 2
Y00000482: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-14-312-5003
Sliding Door Track

143125003
A10-23-813-01-1: RNCC: 3 | RNVC: 2
A10-23-813-01-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-429-1266
Detent Plunger

144291266
027533C01TRA: RNCC: 3 | RNVC: 2
027533C: RNCC: 5 | RNVC: 2

11 Jan 1989

5340-14-532-2513
Mounting Plate

145322513
R31285 1/7: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-14-418-3294
Anchor Strap

144183294
3-451401: RNCC: 3 | RNVC: 9
3-451401: RNCC: 5 | RNVC: 2
3-451401: RNCC: 5 | RNVC: 9

12 Aug 1987

5340-14-526-6883
Mounting Bracket

145266883
305-747-701-0: RNCC: 3 | RNVC: 2

22 Aug 2001

5340-14-423-9376
Buckle

144239376
758103: RNCC: 3 | RNVC: 2
141533: RNCC: 5 | RNVC: 2

5 May 1988

5340-14-523-4921
Cover Strip

145234921
01-250-408: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-14-549-0743
Loop Clamp

145490743
D65377-8: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-519-9704
Loop Clamp

145199704
NO PRIMARY REF14-519-9704: RNCC: 3 | RNVC: 2
6981 N5: RNCC: 5 | RNVC: 9
6981-N5: RNCC: 5 | RNVC: 9

28 Apr 2000

5340-14-535-1687
Angle Bracket

145351687
5000603935: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-424-4392
Mounting Plate

144244392
0570133300: RNCC: 3 | RNVC: 9

19 May 1988

5340-14-396-4072
Rim Lock

143964072
7701452393: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-357-4819
Turnbuckle Body

143574819
0160750054: RNCC: 3 | RNVC: 2
0160750054: RNCC: 5 | RNVC: 2

7 Jun 1979

5340-14-547-5456
Pipe Hanger

145475456
RA1M704916071N1: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-452-3638
Block Clamp

144523638
11111556040: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-520-5595
Buckle

145205595
1705609: RNCC: 3 | RNVC: 2

22 May 2000

5340-14-509-1409
Bumper

145091409
HV4301045: RNCC: 3 | RNVC: 2
SCM220NR75: RNCC: 5 | RNVC: 9

21 Oct 1998

5340-14-477-7937
Pipe Hanger

144777937
050160: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-14-551-2830
Mounting Bracket

145512830
RA1M703786611A1: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-400-7579
Bumper

144007579
4191612: RNCC: 3 | RNVC: 2
4191612: RNCC: 5 | RNVC: 9

21 May 1985

5340-14-375-8904
Bridge Clamp

143758904
5000047963: RNCC: 3 | RNVC: 2
5000047963: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-443-0385
Bow Handle

144430385
2585NR: RNCC: 3 | RNVC: 2
2585: RNCC: 5 | RNVC: 2

7 Nov 1990

5340-14-224-8829
Bumper

142248829
GSM1674A37: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-571-6938
Utility Access Door

145716938
22130093A2002: RNCC: 3 | RNVC: 2

24 Apr 2012

5340-14-483-0982
Mounting Bracket

144830982
0U144128: RNCC: 3 | RNVC: 2
0U144128: RNCC: 5 | RNVC: 2
0U144128: RNCC: 5 | RNVC: 9

8 Aug 1996

5340-14-460-4893
Door Holder

144604893
160-82201: RNCC: 3 | RNVC: 2

27 Jan 1993

5340-14-520-1402
Mounting Bracket

145201402
45729802: RNCC: 3 | RNVC: 2

16 May 2000

5340-14-411-4367
Wiring Harness

144114367
A11A822110120A1: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-445-3320
Bumper

144453320
233116M: RNCC: 3 | RNVC: 2

11 Feb 1991

5340-14-305-8656
Mending Plate

143058656
A86930: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-471-5255
Handwheel

144715255
4051410A: RNCC: 3 | RNVC: 2

31 Aug 1994

5340-14-445-3446
Lock-Release Lever

144453446
39409339: RNCC: 3 | RNVC: 2

11 Feb 1991

5340-14-554-1487
Mounting Bracket

145541487
82051084000: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-520-4579
Buckle

145204579
523554: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-394-6438
Mounting Plate

143946438
79110165: RNCC: 3 | RNVC: 2
79110165: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-401-0849
Retaining Strap

144010849
603699: RNCC: 3 | RNVC: 2

29 May 1985

5340-14-454-6804
Mounting Plate

144546804
398021: RNCC: 3 | RNVC: 2
398021: RNCC: 5 | RNVC: 9

9 Apr 1992

5340-14-430-4621
Retaining Strap

144304621
572191: RNCC: 3 | RNVC: 2

22 Mar 1989

5340-14-554-6499
Mounting Bracket

145546499
82385591000: RNCC: 3 | RNVC: 2

31 Jul 2007

5340-14-518-1989
Angle Bracket

145181989
445459: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-553-6869
Mounting Bracket

145536869
82107315001: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-348-0058
Bow Handle

143480058
C329390: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-520-6117
Mounting Bracket

145206117
45683738: RNCC: 3 | RNVC: 2

24 May 2000

5340-14-550-9253
Angle Bracket

145509253
RA1B701876861: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-512-2925
Mounting Plate

145122925
3BM03342AAAA: RNCC: 3 | RNVC: 2
3BM03342AAAA: RNCC: 5 | RNVC: 2

10 Feb 1999

5340-14-467-7987
Mounting Bracket

144677987
MB2494F00: RNCC: 3 | RNVC: 2

27 Jan 1994

5340-14-522-2464
Mounting Bracket

145222464
D59030: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-14-534-5786
Lock Bolt

145345786
NNM0021020401093: RNCC: 2 | RNVC: 2

26 Mar 2003

5340-14-515-3319
Mounting Plate

145153319
3534312205: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-362-4786
Mending Plate

143624786
F275-21: RNCC: 3 | RNVC: 2

19 Mar 1980

5340-14-486-0707
Mounting Bracket

144860707
332A87-2162-00: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-553-8603
Mounting Bracket

145538603
355R69-0101-10: RNCC: 3 | RNVC: 2

24 May 2007

5340-14-514-4802
Access Cover

145144802
45219266: RNCC: 3 | RNVC: 2
45219266: RNCC: 5 | RNVC: 2
5010579482: RNCC: 5 | RNVC: 2
IF-192-0305: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-425-8841
Loop Clamp

144258841
5000041881: RNCC: 3 | RNVC: 2
1191432: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-14-511-1372
Angle Bracket

145111372
413753: RNCC: 3 | RNVC: 2
413753: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-14-548-1186
Angle Bracket

145481186
RA1M701245041A1: RNCC: 3 | RNVC: 2

12 Dec 2005

5340-14-500-0236
Mounting Bracket

145000236
262437: RNCC: 3 | RNVC: 2
F300 0T 024 0206: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-412-8631
Retaining Strap

144128631
ST406M52P636: RNCC: 3 | RNVC: 2

5 Nov 1986

5340-14-456-6926
Mounting Bracket

144566926
40146038: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-14-461-7555
Threaded Rod End

144617555
200176: RNCC: 3 | RNVC: 2
89472969: RNCC: 5 | RNVC: 2

24 Mar 1993

5340-14-534-6860
Mounting Bracket

145346860
56095470: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-385-8345
Access Cover

143858345
053M11-527073R: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-513-8633
Access Cover

145138633
644313: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-444-6973
Synchro Clamp

144446973
TOP7B1510: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-14-509-6827
Access Cover

145096827
RA1M812350431: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-354-2375
Access Cover

143542375
16320872: RNCC: 3 | RNVC: 2
16320872: RNCC: 5 | RNVC: 9

30 Jan 1979

5340-14-454-6048
Access Cover

144546048
1023386L01: RNCC: 3 | RNVC: 2

8 Apr 1992

5340-14-407-9833
Plug Button

144079833
M4Z7301420701: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-541-1624
Utility Access Door

145411624
250203D700: RNCC: 3 | RNVC: 2

14 May 2004

5340-14-409-0793
Anchor Strap

144090793
4771620770: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-483-6826
Access Cover

144836826
38221721: RNCC: 3 | RNVC: 2
38221721: RNCC: 5 | RNVC: 9

27 Sep 1996

5340-14-338-7135
Access Cover

143387135
195683: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-250-7483
Angle Bracket

142507483
12502458: RNCC: 3 | RNVC: 2
12502458: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-422-6421
Mounting Plate

144226421
235563: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-14-446-7736
Control Rod

144467736
245700459220: RNCC: 3 | RNVC: 9

12 Apr 1991

5340-14-437-0993
Rod End Clevis

144370993
ZK4D6J175: RNCC: 3 | RNVC: 2

17 Jan 1990

5340-14-524-4908
Access Cover

145244908
B001C087: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-429-6806
Access Cover

144296806
158524: RNCC: 3 | RNVC: 2

8 Feb 1989

5340-14-432-6431
Pipe Hanger

144326431
060447000164: RNCC: 3 | RNVC: 9

19 Jun 1989

5340-14-545-3885
Access Cover

145453885
0102270D: RNCC: 3 | RNVC: 2

11 Apr 2005

5340-14-364-3730
Rod End Clevis

143643730
158751: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-544-9048
Access Cover

145449048
46601167AA: RNCC: 3 | RNVC: 2

2 Mar 2005

5340-14-429-8633
Access Cover

144298633
30300295NAA: RNCC: 3 | RNVC: 2

15 Feb 1989

5340-14-306-2435
Access Cover

143062435
TH20J2145: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-398-9874
Access Cover

143989874
M125168: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-536-1916
Access Cover

145361916
4518-5103: RNCC: 3 | RNVC: 2

15 Jul 2003

5340-14-442-5049
Loop Clamp

144425049
RSGU1-18/20-W1: RNCC: 3 | RNVC: 2
RSGU1-18-20: RNCC: 5 | RNVC: 2
91629696: RNCC: 5 | RNVC: 2

17 Oct 1990

5340-14-440-5925
Retaining Strap

144405925
10-89-027D2: RNCC: 3 | RNVC: 2

18 Jul 1990

5340-14-482-6431
Locking Stay

144826431
755405001232: RNCC: 3 | RNVC: 2
7554D-400: RNCC: 5 | RNVC: 2
7554D400: RNCC: 5 | RNVC: 2

18 Jul 1996

5340-14-216-1121
Retaining Strap

142161121
NO PRIMARY REF14-216-1121: RNCC: 3 | RNVC: 2
704408: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-389-9237
Snap Hook

143899237
22102-160-080: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-547-8169
Bumper

145478169
EF/000/289: RNCC: 3 | RNVC: 2
5010316155: RNCC: 5 | RNVC: 2

16 Nov 2005

5340-14-266-9509
Retaining Strap

142669509
14-682-10-20: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-349-9407
Bow Handle

143499407
P4H004709-02: RNCC: 3 | RNVC: 2
4H004709-02: RNCC: 5 | RNVC: 9
P4H004709-02: RNCC: 5 | RNVC: 9

14 Jun 1978

5340-14-549-8837
Mounting Bracket

145498837
2093369-001: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-466-1677
Loop Clamp

144661677
166060: RNCC: 3 | RNVC: 2
89170163: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-528-5829
Loop Clamp

145285829
921116: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-550-3427
Mounting Plate

145503427
2716235350: RNCC: 3 | RNVC: 2

16 Jun 2006

5340-14-508-7359
Mounting Bracket

145087359
5003078012: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-14-361-6748
Angle Bracket

143616748
18129621: RNCC: 3 | RNVC: 2
18129621: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-14-460-0101
Roller Holder

144600101
45215596: RNCC: 3 | RNVC: 2
45215596: RNCC: 5 | RNVC: 9

7 Jan 1993

5340-14-466-0548
Mounting Bracket

144660548
284601: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-14-428-6304
Block Clamp

144286304
LB11211556061: RNCC: 3 | RNVC: 2
11211556061: RNCC: 5 | RNVC: 2

8 Dec 1988

5340-14-495-9746
Mounting Plate

144959746
45280289: RNCC: 3 | RNVC: 2
45280289: RNCC: 3 | RNVC: 9
F300 0T 020 6410: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-362-9645
Access Cover

143629645
0035353204: RNCC: 3 | RNVC: 2
0035353204: RNCC: 5 | RNVC: 9

3 Apr 1980

5340-14-447-7623
Mounting Bracket

144477623
EQUERREPC: RNCC: 3 | RNVC: 2
008039228P: RNCC: 5 | RNVC: 2

3 Jun 1991

5340-14-374-4288
Mechanical Stop

143744288
054038: RNCC: 3 | RNVC: 9

8 Dec 1981

5340-14-228-7844
Angle Bracket

142287844
704065: RNCC: 3 | RNVC: 9
062075855: RNCC: 5 | RNVC: 9
75855: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-439-2532
Angle Bracket

144392532
6063514: RNCC: 3 | RNVC: 2
6063514: RNCC: 5 | RNVC: 2

25 Apr 1990

5340-14-320-4879
Hasp Staple

143204879
170272: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-421-7281
Angle Bracket

144217281
0315771010: RNCC: 3 | RNVC: 2

27 Jan 1988

5340-14-548-1710
Mounting Bracket

145481710
65519170: RNCC: 3 | RNVC: 2

13 Dec 2005

5340-14-546-7710
Mounting Plate

145467710
RA1M706970121: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-14-475-3025
Mounting Plate

144753025
39587523: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-14-455-9080
Plate Spacer

144559080
PM1A726371001: RNCC: 3 | RNVC: 2
PM1A726371001: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-443-2880
Mounting Plate

144432880
2004BIS3: RNCC: 3 | RNVC: 2

14 Nov 1990

5340-14-555-6775
Angle Bracket

145556775
720441: RNCC: 3 | RNVC: 2

6 Dec 2007

5340-14-368-3728
Door Handle

143683728
F116180: RNCC: 3 | RNVC: 2
89254980: RNCC: 5 | RNVC: 2

20 Feb 1981

5340-14-362-2196
Angle Bracket

143622196
1031050028: RNCC: 3 | RNVC: 2
1031050028: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-14-454-5299
Mounting Bracket

144545299
16930335: RNCC: 3 | RNVC: 2

2 Apr 1992

5340-14-471-2273
Angle Bracket

144712273
29417594: RNCC: 3 | RNVC: 2

9 Aug 1994

5340-14-520-6120
Mounting Bracket

145206120
45683859: RNCC: 3 | RNVC: 2

24 May 2000

5340-14-454-5173
Stand Base

144545173
16394007: RNCC: 3 | RNVC: 2

2 Apr 1992

5340-14-368-3375
Lock-Release Lever

143683375
525551: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-14-502-5022
Mounting Bracket

145025022
5000334945: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-563-0777
Utility Access Door

145630777
216616: RNCC: 3 | RNVC: 2

21 Dec 2009

5340-14-468-0997
Mounting Plate

144680997
A59639: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-257-8478
Retaining Strap

142578478
6623: RNCC: 3 | RNVC: 2
202465: RNCC: 3 | RNVC: 2
6623: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-485-7833
Angle Bracket

144857833
10200883: RNCC: 3 | RNVC: 2

12 Feb 1997

5340-14-435-5176
Cover Strip

144355176
DA1D283400325: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-535-6428
Fusible Plug

145356428
GA31850: RNCC: 3 | RNVC: 2

11 Jun 2003

5340-14-432-5393
Retaining Clip

144325393
DA2C230203013A1: RNCC: 3 | RNVC: 2

14 Jun 1989

5340-14-259-8531
Retaining Strap

142598531
050334: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-462-0353
Pad Eye

144620353
D54538: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-403-3335
Retaining Strap

144033335
209749: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-551-2856
Mounting Bracket

145512856
RA1B702206915: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-497-3754
Bumper

144973754
10415379: RNCC: 3 | RNVC: 2
F300 0T 023 0824: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-274-2657
Angle Bracket

142742657
155584: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-354-7034
Bumper

143547034
531687: RNCC: 3 | RNVC: 2
00531687: RNCC: 5 | RNVC: 2

20 Feb 1979

5340-14-403-0460
Mounting Plate

144030460
29739190: RNCC: 3 | RNVC: 2
29739190: RNCC: 5 | RNVC: 9

25 Jul 1985

5340-14-482-5016
Synchro Clamp

144825016
PM1A711220153: RNCC: 3 | RNVC: 2
PM1A711220153: RNCC: 5 | RNVC: 2

11 Jul 1996

5340-14-506-7539
Bumper

145067539
10477143: RNCC: 3 | RNVC: 2

13 May 1998

5340-14-205-5795
Retaining Strap

142055795
0000291796: RNCC: 3 | RNVC: 2
0000291796: RNCC: 5 | RNVC: 9
291796: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-031-1732
Mending Plate

140311732
VDP5214: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-403-9079
Door Hook

144039079
1000112-2: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-305-2818
Runner

143052818
22282075: RNCC: 3 | RNVC: 2
L282075: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-511-2106
Mounting Bracket

145112106
10541633: RNCC: 3 | RNVC: 2

9 Dec 1998

5340-14-388-8208
Rim Lock

143888208
7700586837: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-314-0291
Mending Plate

143140291
60A39C1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-555-7278
Corner Brace

145557278
0301011060: RNCC: 3 | RNVC: 2

11 Dec 2007

5340-14-550-9987
Mounting Bracket

145509987
574668: RNCC: 3 | RNVC: 2

18 Aug 2006

5340-14-497-4275
Mounting Bracket

144974275
10224076: RNCC: 3 | RNVC: 2
F300 0T 023 1636: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-343-7103
Retaining Strap

143437103
185168: RNCC: 3 | RNVC: 2

13 Jul 1977

5340-14-569-7345
Utility Access Door

145697345
730010S941-10B: RNCC: 3 | RNVC: 2

18 Oct 2011

5340-14-389-4662
Bow Handle

143894662
365A58-1102KR: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-464-1462
Loop Clamp

144641462
634004722: RNCC: 3 | RNVC: 2
6340-04722: RNCC: 5 | RNVC: 2
634004722: RNCC: 5 | RNVC: 9
6340-04722: RNCC: 5 | RNVC: 9

15 Jul 1993

5340-14-226-2036
Padlock

142262036
ZENITH38: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-374-1729
Loop Clamp

143741729
ASNA0022-75N06: RNCC: 1 | RNVC: 2
61100005006: RNCC: 3 | RNVC: 2
ASNA002-75N06: RNCC: 3 | RNVC: 2
A0022-75N06: RNCC: 5 | RNVC: 2
75N6: RNCC: 5 | RNVC: 2
ASNA002-75N06: RNCC: 5 | RNVC: 2
A0022-75N06: RNCC: 5 | RNVC: 2

8 Dec 1981

5340-14-399-0528
Mounting Plate

143990528
477320B: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-210-6745
Access Cover

142106745
85264: RNCC: 3 | RNVC: 2
60015-08: RNCC: 3 | RNVC: 9

1 Jan 1964

5340-14-268-9946
Handwheel

142689946
000MA1055F8REP1: RNCC: 3 | RNVC: 2
000MA0060F16-2C1: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-257-2649
Mounting Plate

142572649
57304-42-30DHJ: RNCC: 3 | RNVC: 2
NSA57304-423DHJ: RNCC: 3 | RNVC: 2
57304-042-030DHJ: RNCC: 5 | RNVC: 2
57304-423DHJ: RNCC: 5 | RNVC: 2
N5751380423: RNCC: 5 | RNVC: 2
NSA57304-423DHJ: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-523-2586
Pipe Hanger

145232586
RA1M703736233N1: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-377-1428
Mounting Plate

143771428
ES42481: RNCC: 3 | RNVC: 2
ES42481: RNCC: 5 | RNVC: 2
ES42481: RNCC: 5 | RNVC: 2
ES42481: RNCC: 5 | RNVC: 9

17 May 1982

5340-14-548-1449
Mounting Bracket

145481449
14100006016: RNCC: 3 | RNVC: 2

12 Dec 2005

5340-14-403-9072
Webbing Strap

144039072
3674640: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-350-5168
Mending Plate

143505168
7302: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-549-7682
Retaining Clip

145497682
S521A1051283: RNCC: 3 | RNVC: 2

10 May 2006

5340-14-500-9672
Mounting Bracket

145009672
E69500000006: RNCC: 3 | RNVC: 2
F300 0T 024 9885: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-540-2318
Mounting Bracket

145402318
S652A2078201: RNCC: 3 | RNVC: 2

11 Mar 2004

5340-14-439-4255
Butt Hinge

144394255
DA2C201701570A1: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-490-6461
Mounting Bracket

144906461
2049349N: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-500-8163
Section Block Clamp

145008163
E64009998023: RNCC: 3 | RNVC: 2
F300 0T 024 8365: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-518-9273
Support Hook

145189273
436134D: RNCC: 3 | RNVC: 2

29 Feb 2000

5340-14-466-1489
Cushioning Pad

144661489
00122044: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-14-511-9959
Bridge Clamp

145119959
0053587: RNCC: 3 | RNVC: 2
4852220: RNCC: 3 | RNVC: 9

2 Feb 1999

5340-14-453-1558
Mounting Bracket

144531558
16283264: RNCC: 3 | RNVC: 2

5 Feb 1992

5340-14-431-6105
Angle Bracket

144316105
39447076: RNCC: 3 | RNVC: 2
39447076: RNCC: 5 | RNVC: 9

26 Apr 1989

5340-14-355-3538
Angle Bracket

143553538
055E02-519911S: RNCC: 3 | RNVC: 2
0519911S00: RNCC: 5 | RNVC: 2

19 Mar 1979

5340-14-522-4614
Mounting Plate

145224614
747410: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-14-232-3275
Handwheel

142323275
GSM137-001F17-8N1: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-412-8664
Webbing Strap

144128664
ST406M75A18-21: RNCC: 3 | RNVC: 2

5 Nov 1986

5340-14-457-4837
Loop Clamp

144574837
MAT169-0029F10: RNCC: 3 | RNVC: 2

8 Sep 1992

5340-14-365-8153
Locking Stay

143658153
120069-326: RNCC: 3 | RNVC: 9
91388964: RNCC: 5 | RNVC: 2

8 Oct 1980

5340-14-322-0376
Mending Plate

143220376
120602: RNCC: 3 | RNVC: 2
120497-120602: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-485-9872
Angle Bracket

144859872
54741.4: RNCC: 3 | RNVC: 2
547414: RNCC: 5 | RNVC: 2

26 Feb 1997

5340-14-226-2686
Rod End Clevis

142262686
R12608B8AEL: RNCC: 2 | RNVC: 2
8TYPE200: RNCC: 3 | RNVC: 2
R12608B8AEL: RNCC: 3 | RNVC: 9
99202761: RNCC: 5 | RNVC: 2
CHAPE DIAM.8 MM CARRE E36 CDB: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-464-9984
Blank Panel

144649984
365P61-3853-26: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-485-0593
Mounting Bracket

144850593
332A21-1963-01: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-14-487-5614
Pipe Hanger

144875614
RA1M703842265A1: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-487-6293
Bumper

144876293
HE47: RNCC: 3 | RNVC: 2
F300 0T 022 5688: RNCC: 6 | RNVC: 9

16 Apr 1997

5340-14-474-9531
Swivel Caster

144749531
3480-POR100P62: RNCC: 3 | RNVC: 2

15 Mar 1995

5340-14-303-8284
Loop Clamp

143038284
25053105500: RNCC: 3 | RNVC: 2
550217: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-544-5717
Mounting Bracket

145445717
67011019: RNCC: 3 | RNVC: 2

10 Feb 2005

5340-14-348-6458
Clamping Catch

143486458
G10ZBVERTARMEE: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-14-516-8361
Mounting Plate

145168361
PLAQU94791X00: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-14-481-3703
Mounting Bracket

144813703
10329092: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-396-2998
Tubular Fairlead

143962998
4771520890: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-549-7754
Angle Bracket

145497754
14714-26: RNCC: 3 | RNVC: 2

11 May 2006

5340-14-362-2549
Angle Bracket

143622549
A11A211160120: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-398-9969
Bumper

143989969
165007: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-318-0512
Synchro Clamp

143180512
0213267060: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-501-0613
Mounting Plate

145010613
40207219: RNCC: 3 | RNVC: 2
F300 0T 025 0945: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-551-5149
Threaded Rod End

145515149
6401BTA200001: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-436-4963
Mounting Plate

144364963
16008893: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-524-0607
Retaining Band

145240607
763927: RNCC: 3 | RNVC: 2
763927: RNCC: 5 | RNVC: 2

22 Feb 2001

5340-14-497-7513
Rim Latch

144977513
22.04354ZI: RNCC: 3 | RNVC: 2

15 Oct 1997

5340-14-544-9804
Pipe Hanger

145449804
5010377921: RNCC: 3 | RNVC: 2

9 Mar 2005

5340-14-224-6301
Loop Clamp

142246301
2000261TRPP8A: RNCC: 3 | RNVC: 2
2000261TRPP8A: RNCC: 3 | RNVC: 9

1 Jan 1966

5340-14-403-9170
Padlock

144039170
CITY23: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-531-7175
Loop Clamp

145317175
1SPAL4025PPDPALAS: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-14-501-4563
Retaining Strap

145014563
0197044M1-04P4: RNCC: 3 | RNVC: 2

29 Oct 1997

5340-14-532-1036
Mounting Bracket

145321036
1SH41767805: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-385-1031
Retaining Band

143851031
M4W2301716702: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-449-2652
Swivel Caster

144492652
71120: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-432-5709
Cover Strip

144325709
DA2C291164120A2: RNCC: 3 | RNVC: 2

14 Jun 1989

5340-14-551-5134
Cushioning Pad

145515134
6801BTA130001: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-473-7838
Access Cover

144737838
20627506: RNCC: 3 | RNVC: 2
20627506: RNCC: 5 | RNVC: 2
MAT:BANC TEST SCAMP POUR ROLAND: RNCC: 5 | RNVC: 9

11 Jan 1995

5340-14-402-0193
Angle Bracket

144020193
226957: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-470-1013
Retaining Bail

144701013
5300: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-14-397-4143
Utility Access Door

143974143
5100321: RNCC: 3 | RNVC: 2
5000920106: RNCC: 3 | RNVC: 9

14 Dec 1984

5340-14-536-9726
Rod End Clevis

145369726
27.04472: RNCC: 3 | RNVC: 2

24 Sep 2003

Load More Results