What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 86 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 86 of 446

5340-14-555-4149
Loop Clamp

145554149
78651RH18CF: RNCC: 1 | RNVC: 2
78651RH18CF: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-14-496-0088
Webbing Strap

144960088
NM104: RNCC: 3 | RNVC: 9
F300 0T 020 7562: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-290-1071
Expansion Plug

142901071
11678: RNCC: 3 | RNVC: 2
DH11678: RNCC: 5 | RNVC: 9
11678: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-417-0720
Webbing Strap

144170720
120541: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-14-514-0678
Threaded Rod End

145140678
RA1M704875640: RNCC: 3 | RNVC: 2

22 Apr 1999

5340-14-505-1882
Expansion Plug

145051882
1140957: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-386-9179
Strap Hinge

143869179
5340CDPAUMELLEGRILLEL0NGLAME140D: RNCC: 2 | RNVC: 2

24 Aug 1983

5340-14-527-6135
Pipe Hanger

145276135
COU001550000220: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-14-472-8801
Access Cover

144728801
332A41-4193-24: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-426-4673
Cover Strip

144264673
CJ195X323X80X1,5AG3: RNCC: 3 | RNVC: 2

1 Sep 1988

5340-14-441-3637
Plug Button

144413637
PM1A216450019: RNCC: 3 | RNVC: 2
PM1A216450019: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-14-532-2823
Rod End Clevis

145322823
48878: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-14-554-1471
Mounting Bracket

145541471
82045849000: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-324-2437
Rod End Clevis

143242437
330A21-2525-20: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-472-0832
Synchro Clamp

144720832
F773-23820M1: RNCC: 3 | RNVC: 2

5 Oct 1994

5340-14-385-9707
Access Cover

143859707
5000606686: RNCC: 3 | RNVC: 2
5000606686: RNCC: 5 | RNVC: 9

24 Aug 1983

5340-14-500-4700
Access Cover

145004700
E63501000004: RNCC: 3 | RNVC: 2
F300 0T 024 4869: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-518-3870
Access Cover

145183870
46598407: RNCC: 3 | RNVC: 2

2 Feb 2000

5340-14-329-1376
Control Rod

143291376
880-27-0-108-2: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-370-2424
Pipe Hanger

143702424
303-995-901-0: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-543-4952
Mounting Bracket

145434952
6064-1-3041P: RNCC: 3 | RNVC: 2

10 Nov 2004

5340-14-457-4675
Stand Base

144574675
80-300980-1: RNCC: 3 | RNVC: 2

5 Sep 1992

5340-14-529-4423
Furniture Leg Tip

145294423
44000-24: RNCC: 3 | RNVC: 2
4400024: RNCC: 5 | RNVC: 2

29 Mar 2002

5340-14-308-7224
Runner

143087224
A10-67-807-51-0: RNCC: 3 | RNVC: 2
A10-68-807-51-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-285-2044
Rod End Connector

142852044
A10-76-940-04-0: RNCC: 3 | RNVC: 2
A10-76-940-04-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-286-1488
Access Cover

142861488
A10-94-965-19-0: RNCC: 3 | RNVC: 2
A10-94-965-19-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-486-6109
Butt Hinge

144866109
A10-12-735-39-1: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-14-473-2399
Flush Catch Claw

144732399
3210-23046-607: RNCC: 3 | RNVC: 2

7 Dec 1994

5340-14-271-0097
Cover Strip

142710097
3160S25-29-570-1: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-275-0685
Flush Catch Claw

142750685
D921-54: RNCC: 3 | RNVC: 2
530162: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-222-6994
Loop Clamp

142226994
3411312000: RNCC: 3 | RNVC: 2
3411312000: RNCC: 5 | RNVC: 2
0003020735: RNCC: 5 | RNVC: 2
WBE1FL1X: RNCC: 5 | RNVC: 9
WBE1FL1X843A: RNCC: 5 | RNVC: 9
0003020735: RNCC: 5 | RNVC: 9
3006706: RNCC: 5 | RNVC: 9
3020735: RNCC: 5 | RNVC: 9
0003006706: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-485-8660
Retaining Strap

144858660
263939: RNCC: 3 | RNVC: 2

19 Feb 1997

5340-14-552-2320
Cover Strip

145522320
SZ18.251.275: RNCC: 3 | RNVC: 2

5 Dec 2006

5340-14-349-2944
Retaining Strap

143492944
1180055: RNCC: 3 | RNVC: 2
1180055: RNCC: 5 | RNVC: 2

22 May 1978

5340-14-408-0301
Mounting Plate

144080301
20723983-8: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-386-0598
Butt Hinge

143860598
22518924: RNCC: 3 | RNVC: 2
22518924: RNCC: 3 | RNVC: 2
22518924: RNCC: 5 | RNVC: 9

24 Aug 1983

5340-14-425-1422
Access Cover

144251422
0742559B00: RNCC: 3 | RNVC: 2

22 Jun 1988

5340-14-413-9062
Butt Hinge

144139062
191819: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-434-0774
Control Rod

144340774
74155955: RNCC: 3 | RNVC: 9

4 Sep 1989

5340-14-405-2535
Webbing Strap

144052535
501231: RNCC: 3 | RNVC: 2
1230704: RNCC: 5 | RNVC: 2

27 Nov 1985

5340-14-476-4979
Mending Plate

144764979
39535553: RNCC: 3 | RNVC: 2
39535553: RNCC: 3 | RNVC: 9
F300 0T 018 4875: RNCC: 6 | RNVC: 9

14 Jun 1995

5340-14-354-7829
Angle Bracket

143547829
0000387355: RNCC: 3 | RNVC: 2
0000387355: RNCC: 5 | RNVC: 9
387355: RNCC: 5 | RNVC: 9

20 Feb 1979

5340-14-554-0207
Mounting Bracket

145540207
372 040: RNCC: 3 | RNVC: 2
372 040: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-14-440-3222
Stand Base

144403222
332A63-1602-61: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-513-6683
Access Cover

145136683
307-156-604-0: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-14-294-3007
Retaining Strap

142943007
015-02-08-02: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-553-5675
Clamping Catch

145535675
GE.91-IB: RNCC: 3 | RNVC: 2
GE91IB: RNCC: 3 | RNVC: 9
GE.91.IB: RNCC: 5 | RNVC: 9

17 Apr 2007

5340-14-216-3058
Buckle

142163058
NO PRIMARY REF14-216-3058: RNCC: 3 | RNVC: 2
3014: RNCC: 5 | RNVC: 9
6414: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-454-1933
Detent Plunger

144541933
LN331082-084-085F32REP33: RNCC: 3 | RNVC: 2
LN331082REP33: RNCC: 5 | RNVC: 2
LN331084REP33: RNCC: 5 | RNVC: 2
LN331085REP33: RNCC: 5 | RNVC: 2

26 Mar 1992

5340-14-482-3706
Mounting Bracket

144823706
312-15940-003: RNCC: 3 | RNVC: 2

10 Jul 1996

5340-14-453-4207
Mounting Plate

144534207
NO PRIMARY REF14-453-4207: RNCC: 3 | RNVC: 2
637468: RNCC: 5 | RNVC: 2

19 Feb 1992

5340-14-524-7536
Loop Clamp

145247536
21234360-00: RNCC: 3 | RNVC: 2
21234360-0: RNCC: 5 | RNVC: 2

11 Apr 2001

5340-14-329-1377
Rod End Clevis

143291377
880-27-0-110-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-519-5799
Access Cover

145195799
4291-1-09: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-422-7980
Threaded Rod End

144227980
NO PRIMARY REF 14-422-7980: RNCC: 3 | RNVC: 2
91610841: RNCC: 5 | RNVC: 2
NFE8-1-4C: RNCC: 5 | RNVC: 9
ETENFE8-1-4C: RNCC: 5 | RNVC: 9

17 Mar 1988

5340-14-531-8225
Mounting Bracket

145318225
341A65-5062-00: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-536-9902
Mounting Bracket

145369902
8105-01: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-377-9374
Control Rod

143779374
710025-20061: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-438-1085
Mounting Bracket

144381085
16-010-06-10: RNCC: 3 | RNVC: 2

7 Mar 1990

5340-14-550-2708
Angle Bracket

145502708
21251907-2: RNCC: 3 | RNVC: 2

14 Jun 2006

5340-14-252-1452
Loop Clamp

142521452
4038-1-2: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-514-0763
Pawl Fastener Set

145140763
PM1A005001N15: RNCC: 3 | RNVC: 2
PM1A005001N15: RNCC: 5 | RNVC: 2
MJBY: RNCC: 5 | RNVC: 9

22 Apr 1999

5340-14-483-5581
Flush Door Ring

144835581
21488: RNCC: 3 | RNVC: 2

19 Sep 1996

5340-14-553-3581
Mounting Bracket

145533581
M5221123000000: RNCC: 3 | RNVC: 2
M5221123000000: RNCC: 5 | RNVC: 2

28 Mar 2007

5340-14-527-0993
Loop Clamp

145270993
BR061-XI-3: RNCC: 3 | RNVC: 2

3 Oct 2001

5340-14-471-7805
Mounting Plate

144717805
5000668912: RNCC: 3 | RNVC: 2

14 Sep 1994

5340-14-388-4663
Mending Plate

143884663
52230010700: RNCC: 3 | RNVC: 2
522300107: RNCC: 5 | RNVC: 2

3 Nov 1983

5340-14-460-7581
Rod End Connector

144607581
027530Z01TRA: RNCC: 3 | RNVC: 2
027530Z: RNCC: 5 | RNVC: 2

8 Feb 1993

5340-14-360-3338
Angle Bracket

143603338
NBC10AHE103: RNCC: 3 | RNVC: 2

23 Nov 1979

5340-14-507-6422
Mounting Bracket

145076422
96183334: RNCC: 3 | RNVC: 2
CRAF 885206301: RNCC: 5 | RNVC: 2

7 Aug 1998

5340-14-435-5852
Mounting Plate

144355852
2369AB00301: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-383-5160
Loop Clamp

143835160
20189134: RNCC: 3 | RNVC: 2
20189134: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-535-8077
Synchro Clamp

145358077
36402860: RNCC: 3 | RNVC: 2

25 Jun 2003

5340-14-553-6864
Mounting Bracket

145536864
82179394000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-551-8448
Mounting Bracket

145518448
46071638: RNCC: 3 | RNVC: 2

31 Oct 2006

5340-14-508-0534
Mounting Plate

145080534
46246146: RNCC: 3 | RNVC: 2
46246146: RNCC: 5 | RNVC: 9

26 Aug 1998

5340-14-468-8412
Mounting Bracket

144688412
PL21577: RNCC: 3 | RNVC: 2

23 Mar 1994

5340-14-480-0866
Shelf Bracket

144800866
RA1M121337330: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-480-3423
Angle Bracket

144803423
39076950: RNCC: 3 | RNVC: 2
45000036: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-348-7307
Lock-Release Lever

143487307
ST453UM11P38: RNCC: 3 | RNVC: 2
ST453UM11P38: RNCC: 5 | RNVC: 9

19 Apr 1978

5340-14-032-0356
Control Rod

140320356
N21ABB11: RNCC: 3 | RNVC: 2
N21ABB11: RNCC: 5 | RNVC: 9

5 Jul 1980

5340-14-550-9065
Retaining Bail

145509065
RA1B794300821N1: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-282-6000
Mounting Bracket

142826000
0235107210: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-031-4158
Loop Clamp

140314158
19297355: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-504-6334
Lock Bolt

145046334
F00189040: RNCC: 3 | RNVC: 2
F00189040: RNCC: 5 | RNVC: 9

25 Feb 1998

5340-14-437-8074
Padlock

144378074
AL202: RNCC: 3 | RNVC: 2

21 Feb 1990

5340-14-327-5671
Angle Bracket

143275671
192173: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-209-8542
Loop Clamp

142098542
71135: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-459-9195
Loop Clamp

144599195
NOR028422: RNCC: 3 | RNVC: 2

24 Dec 1992

5340-14-458-9110
Mounting Bracket

144589110
100A102673A: RNCC: 3 | RNVC: 2

5 Nov 1992

5340-14-548-6266
Angle Bracket

145486266
RA1M702506029A1: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-508-7273
Mounting Bracket

145087273
7M524A3: RNCC: 3 | RNVC: 2

29 Sep 1998

5340-14-479-6984
Webbing Strap

144796984
8507-90: RNCC: 3 | RNVC: 2
647284: RNCC: 5 | RNVC: 2
9255422280: RNCC: 5 | RNVC: 2

31 Jan 1996

5340-14-549-8960
Mounting Bracket

145498960
262 221 10: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-523-1969
Runner

145231969
121A26-720-00-0: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-515-0523
Runner

145150523
464695: RNCC: 3 | RNVC: 2
464695-001: RNCC: 5 | RNVC: 9

30 Jun 1999

5340-14-539-6531
Loop Clamp

145396531
21231930-00: RNCC: 3 | RNVC: 2
21231930-2: RNCC: 5 | RNVC: 2

28 Jan 2004

5340-14-467-1000
Access Cover

144671000
634074120: RNCC: 3 | RNVC: 2
6340-74120: RNCC: 5 | RNVC: 2

16 Dec 1993

5340-14-319-8628
Bumper

143198628
501-863-021-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-481-5997
Rod End Clevis

144815997
414198: RNCC: 3 | RNVC: 2
414198-001: RNCC: 5 | RNVC: 9

16 May 1996

5340-14-442-4475
Retaining Strap

144424475
NO PRIMARY REF14-442-4475: RNCC: 3 | RNVC: 2
0329-0408-202-8/8REP45: RNCC: 5 | RNVC: 9
0330-0408-202-8/8REP45: RNCC: 5 | RNVC: 9

16 Oct 1990

5340-14-254-8972
Retaining Strap

142548972
153536: RNCC: 3 | RNVC: 2
5171082000: RNCC: 3 | RNVC: 2
710820: RNCC: 5 | RNVC: 1
710820: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-297-4376
Expansion Plug

142974376
003850: RNCC: 3 | RNVC: 9

1 Jan 1973

5340-14-541-7949
Mounting Bracket

145417949
E66403100119: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-336-7631
Loop Clamp

143367631
65030: RNCC: 3 | RNVC: 9

7 Oct 1976

5340-14-480-3864
Mounting Bracket

144803864
35 51 35: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-461-0190
Section Block Clamp

144610190
16787417: RNCC: 3 | RNVC: 2
16787417: RNCC: 5 | RNVC: 9

17 Feb 1993

5340-14-466-2475
Mounting Plate

144662475
2D-GD: RNCC: 3 | RNVC: 2

3 Nov 1993

5340-14-414-6855
Rigid Caster

144146855
NO PRIMARY REF14-414-6855: RNCC: 3 | RNVC: 2
179A9018: RNCC: 5 | RNVC: 2

25 Feb 1987

5340-14-435-9588
Loop Clamp

144359588
332A21-1971-20: RNCC: 3 | RNVC: 2

29 Nov 1989

5340-14-478-0546
Mounting Bracket

144780546
418-01535-000: RNCC: 3 | RNVC: 2

11 Oct 1995

5340-14-433-2791
Bridge Clamp

144332791
160H752515-06: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-14-501-9371
Blank Panel

145019371
332A11-4024-24: RNCC: 3 | RNVC: 2

19 Nov 1997

5340-14-315-8317
Bumper

143158317
NO PRIMARY REF14-315-8317: RNCC: 3 | RNVC: 2
4920551REP4: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-356-7934
Compression Cup

143567934
3327: RNCC: 3 | RNVC: 2
85-686-9288: RNCC: 6 | RNVC: 9

15 May 1979

5340-14-449-7342
Mounting Bracket

144497342
CPB133000-150: RNCC: 3 | RNVC: 2
89414643: RNCC: 5 | RNVC: 2

4 Sep 1991

5340-14-249-3897
Lock Bolt

142493897
321A23-2102-01: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-470-5460
Loop Clamp

144705460
EA5M706-058: RNCC: 3 | RNVC: 2

22 Jun 1994

5340-14-508-7857
Bow Handle

145087857
4918-1-002: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-14-338-4438
Rod End Connector

143384438
330A76-1063-21: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-502-6351
Mounting Bracket

145026351
M371-05004: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-289-6382
Rod End Connector

142896382
121E27-407-01-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-526-9400
Access Cover

145269400
21230753-00: RNCC: 3 | RNVC: 2
21230753-9: RNCC: 5 | RNVC: 2

19 Sep 2001

5340-14-539-2462
Angle Bracket

145392462
21169295-00: RNCC: 3 | RNVC: 2
21169295-5: RNCC: 5 | RNVC: 2

17 Dec 2003

5340-14-252-5824
Loop Clamp

142525824
15260M8: RNCC: 3 | RNVC: 2
675-408-140-0: RNCC: 5 | RNVC: 2
15260M8: RNCC: 5 | RNVC: 9
675-408-140-0: RNCC: 8 | RNVC: 2

1 Jan 1968

5340-14-350-2871
Loop Clamp

143502871
3-2607-16A: RNCC: 3 | RNVC: 2
3-2607-16: RNCC: 5 | RNVC: 2

14 Jun 1978

5340-14-235-6129
Rod End Clevis

142356129
1050-32-041-01-0: RNCC: 3 | RNVC: 2
32-041-01-0: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-372-1403
Clamping Catch

143721403
GP.27-ZB: RNCC: 3 | RNVC: 2
1129945T00: RNCC: 5 | RNVC: 2
GP27ZB: RNCC: 5 | RNVC: 2

1 Sep 1981

5340-14-511-4187
Access Cover

145114187
NO PRIMARY REF14-511-4187: RNCC: 3 | RNVC: 2
394-5: RNCC: 5 | RNVC: 9
5340AA2040329: RNCC: 6 | RNVC: 9

16 Dec 1998

5340-14-360-8092
Webbing Strap

143608092
100SP37-0011: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-224-5974
Expansion Plug

142245974
BN055-10: RNCC: 3 | RNVC: 2
BN05510: RNCC: 3 | RNVC: 2
212778: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-478-2713
Angle Bracket

144782713
2303-0040-001: RNCC: 3 | RNVC: 2

18 Oct 1995

5340-14-303-2132
Loop Clamp

143032132
51115305022: RNCC: 3 | RNVC: 2
255302200: RNCC: 5 | RNVC: 2
121E75-480-24-0: RNCC: 5 | RNVC: 2
EN4114S22NH0: RNCC: 5 | RNVC: 2
A0021-25S22: RNCC: 5 | RNVC: 2
25S22: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-419-9591
Quick Release Pin

144199591
NO PRIMARY REF14-419-9591: RNCC: 3 | RNVC: 2
500-00-34: RNCC: 5 | RNVC: 9

10 Nov 1987

5340-14-373-1657
Loop Clamp

143731657
225-000-12701: RNCC: 3 | RNVC: 2
22500012701: RNCC: 5 | RNVC: 2

21 Oct 1981

5340-14-495-0733
Mounting Plate

144950733
095-00-102: RNCC: 3 | RNVC: 2
F300 0T 018 3050: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-339-9513
Mounting Bracket

143399513
253-5M662P23B: RNCC: 3 | RNVC: 9
PA253-5M662P23B: RNCC: 5 | RNVC: 9

18 Jan 1977

5340-14-458-7348
Arched Cushion

144587348
MAT169-0012F21DE20,5: RNCC: 3 | RNVC: 2

29 Oct 1992

5340-14-554-1695
Mounting Bracket

145541695
CLB501-610-420: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-344-7835
Mounting Bracket

143447835
0249960740: RNCC: 3 | RNVC: 2
85-800-5909: RNCC: 6 | RNVC: 9

9 Sep 1977

5340-14-300-8729
Loop Clamp

143008729
55218-310B316ADL: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-441-3388
Angle Bracket

144413388
78702-060A: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-551-2898
Angle Bracket

145512898
RA1M702436443: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-452-3080
Synchro Clamp

144523080
ST406M12P15E12: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-520-5274
Angle Bracket

145205274
46062941: RNCC: 3 | RNVC: 2
46062941: RNCC: 5 | RNVC: 9

22 May 2000

5340-14-398-9347
Retaining Strap

143989347
401059: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-398-6696
Bow Handle

143986696
2291I: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-449-6513
Runner

144496513
009053133: RNCC: 3 | RNVC: 9
9053133: RNCC: 5 | RNVC: 2
9053133: RNCC: 5 | RNVC: 9

28 Aug 1991

5340-14-392-8131
Spring Holder

143928131
0000729715: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-490-0872
Mounting Plate

144900872
29400173: RNCC: 3 | RNVC: 2

10 Sep 1997

5340-14-468-3954
Mounting Plate

144683954
166752: RNCC: 3 | RNVC: 2
89170249: RNCC: 5 | RNVC: 2

23 Feb 1994

5340-14-495-7591
Webbing Strap

144957591
304018036029A: RNCC: 3 | RNVC: 9
F300 0T 020 0388: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-546-4918
Butt Hinge

145464918
61027021AA: RNCC: 3 | RNVC: 2

8 Jul 2005

5340-14-463-8729
Loop Clamp

144638729
166031: RNCC: 3 | RNVC: 2
89170142: RNCC: 5 | RNVC: 2

30 Jun 1993

5340-14-551-3512
Angle Bracket

145513512
RA1M705956411N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-468-1697
Cover Strip

144681697
DA1N201732525A1: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-505-0268
Loop Clamp

145050268
5000417548: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-361-2248
Leaf Spring

143612248
5000320429: RNCC: 3 | RNVC: 2
5000320429: RNCC: 5 | RNVC: 9

24 Jan 1980

5340-14-554-3326
Mounting Bracket

145543326
82119090000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-367-4636
Angle Bracket

143674636
A11A221176221: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-521-8803
Pipe Hanger

145218803
DLT058095: RNCC: 3 | RNVC: 2

20 Sep 2000

5340-14-461-6618
Mounting Plate

144616618
1061905S00: RNCC: 3 | RNVC: 2

19 Mar 1993

5340-14-428-6281
Block Clamp

144286281
LB11111556020: RNCC: 3 | RNVC: 2
11111556020: RNCC: 5 | RNVC: 2

8 Dec 1988

5340-14-422-1669
Surface Bolt

144221669
1204124P004: RNCC: 3 | RNVC: 2
ST448M11P45A: RNCC: 5 | RNVC: 2
ST448M11P45: RNCC: 5 | RNVC: 2

24 Feb 1988

5340-14-453-7188
Protection Bellows

144537188
75077299: RNCC: 3 | RNVC: 2
B77299: RNCC: 5 | RNVC: 2

5 Mar 1992

5340-14-463-0543
Rim Lock Set

144630543
VAC00131: RNCC: 3 | RNVC: 2

14 May 1993

5340-14-419-7885
Synchro Clamp

144197885
160H712801-29: RNCC: 3 | RNVC: 2

5 Nov 1987

5340-14-423-5986
Swivel Caster

144235986
38203010: RNCC: 3 | RNVC: 9

21 Apr 1988

5340-14-508-5289
Mounting Bracket

145085289
10496223: RNCC: 3 | RNVC: 2

16 Sep 1998

5340-14-441-5736
Protection Bellows

144415736
61111: RNCC: 3 | RNVC: 2

4 Sep 1990

5340-14-506-1365
Mounting Bracket

145061365
3012130501: RNCC: 3 | RNVC: 2

8 Apr 1998

5340-14-466-3962
Loop Clamp

144663962
3-22609-01-25A: RNCC: 3 | RNVC: 2
3-22609-01-25A: RNCC: 5 | RNVC: 2

3 Nov 1993

5340-14-519-1823
Access Cover

145191823
157E342-02: RNCC: 3 | RNVC: 2
1088399D02: RNCC: 5 | RNVC: 2
157E342-02: RNCC: 5 | RNVC: 9

10 Mar 2000

5340-14-410-5949
Anchor Strap

144105949
H861-58: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-438-4542
Casement Fastener

144384542
332A22-1301-0083: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-246-1660
Strap Fastener Loop

142461660
6G01-060-15: RNCC: 3 | RNVC: 2
6G01-060-15: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-529-5605
Access Cover

145295605
330A68-1612-22: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-373-6446
Bail Handle

143736446
D2604-27-5: RNCC: 3 | RNVC: 2

13 Nov 1981

5340-14-323-5867
Retaining Strap

143235867
NO PRIMARY REF14-323-5867: RNCC: 3 | RNVC: 2
CH69-10-5: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-297-3132
Retaining Strap

142973132
501-709-112-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-377-1185
Access Cover

143771185
12331-349-690: RNCC: 3 | RNVC: 2
12331-349-690: RNCC: 5 | RNVC: 2
12331349690: RNCC: 5 | RNVC: 9

17 May 1982

5340-14-554-0263
Mounting Bracket

145540263
358 219: RNCC: 3 | RNVC: 2
358 219: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-14-337-5695
Angle Bracket

143375695
522908: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-470-3491
Loop Clamp

144703491
HRL1B1TM12PP: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-487-1207
Mounting Plate

144871207
8446-60: RNCC: 3 | RNVC: 2
F300 0T 012 3470: RNCC: 6 | RNVC: 9

10 Apr 1997

5340-14-387-6508
Handwheel

143876508
662-20: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-422-8036
Quick Release Pin

144228036
NO PRIMARY REF14-422-8036: RNCC: 3 | RNVC: 2
LS6T09-35: RNCC: 5 | RNVC: 9

17 Mar 1988

5340-14-362-6728
Angle Bracket

143626728
501-730-601-0: RNCC: 3 | RNVC: 2
85-800-8458: RNCC: 6 | RNVC: 9

19 Mar 1980

5340-14-536-4503
Webbing Strap

145364503
ARO9017-14: RNCC: 3 | RNVC: 2

22 Aug 2003

5340-14-274-7701
Rod End Connector

142747701
262-10-48632-37: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-507-1507
Elastic Strap

145071507
21225088-00: RNCC: 3 | RNVC: 2
21225088-4: RNCC: 5 | RNVC: 2

17 Jun 1998

5340-14-348-8132
Quick Release Pin

143488132
121ECRT83-025A: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-14-486-5240
Mounting Bracket

144865240
2-4423-253: RNCC: 3 | RNVC: 2

21 Mar 1997

5340-14-309-1866
Retaining Strap

143091866
1050-76-211-53-1: RNCC: 3 | RNVC: 2
76-211-53-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-351-2423
Angle Bracket

143512423
17AT20-13-06: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-489-4531
Angle Bracket

144894531
RENFO92727A00: RNCC: 3 | RNVC: 2
RENFO92727X00: RNCC: 5 | RNVC: 9

23 Jul 1997

5340-14-351-0891
Bumper

143510891
2046: RNCC: 3 | RNVC: 9
5000116800: RNCC: 5 | RNVC: 2
5000116800: RNCC: 5 | RNVC: 9
F300 0T 020 0755: RNCC: 6 | RNVC: 9

10 Aug 1978

5340-14-222-3025
Angle Bracket

142223025
0000473667: RNCC: 3 | RNVC: 2
0000473667: RNCC: 5 | RNVC: 9
473667: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-409-3351
Angle Bracket

144093351
4771621360: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-521-1517
Access Cover

145211517
F1262265: RNCC: 3 | RNVC: 2
F1262265: RNCC: 5 | RNVC: 2

12 Jul 2000

5340-14-472-0165
Access Cover

144720165
LYN013050032001: RNCC: 3 | RNVC: 2

30 Sep 1994

5340-14-487-0529
Mounting Bracket

144870529
A4524192: RNCC: 3 | RNVC: 2
P45241-92A: RNCC: 5 | RNVC: 2
A45241-92: RNCC: 5 | RNVC: 2

2 Apr 1997

5340-14-465-1531
Rod End Clevis

144651531
365A25-3383-20: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-465-0225
Runner

144650225
MB1611F00: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-397-0103
Anchor Strap

143970103
970655: RNCC: 3 | RNVC: 2
970655: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-479-3292
Mounting Bracket

144793292
0787300W00: RNCC: 3 | RNVC: 2

10 Jan 1996

5340-14-516-6863
Butt Hinge

145166863
46945139: RNCC: 3 | RNVC: 2

12 Oct 1999

5340-14-382-3822
Rim Lock

143823822
BAZ95542: RNCC: 3 | RNVC: 2
2-48X56-24: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-480-2364
Pipe Hanger

144802364
60637-850-921: RNCC: 3 | RNVC: 2
60637: RNCC: 5 | RNVC: 1
60637-850921: RNCC: 5 | RNVC: 2

28 Feb 1996

5340-14-333-1498
Loop Clamp

143331498
501-802-267-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-523-0376
Plug Button

145230376
11518: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-14-472-2509
Mounting Bracket

144722509
0460100340020: RNCC: 3 | RNVC: 2

12 Oct 1994

5340-14-362-2551
Angle Bracket

143622551
A11A211160040: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-362-4782
Pipe Hanger

143624782
5000610340: RNCC: 3 | RNVC: 2
5000610340: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-386-1254
Webbing Strap

143861254
399313: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-577-7743
Utility Resilient Mount

145777743
82714883000: RNCC: 3 | RNVC: 2

9 Oct 2013

5340-14-373-6557
Detent Plunger

143736557
BAZ97304: RNCC: 3 | RNVC: 2

13 Nov 1981

5340-14-484-0483
Shelf Bracket

144840483
ALZ089550141601: RNCC: 3 | RNVC: 2

17 Oct 1996

5340-14-523-2367
Cover Strip

145232367
RA1M292350361: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-445-7361
Mounting Plate

144457361
S710B6: RNCC: 3 | RNVC: 2
S710B6: RNCC: 5 | RNVC: 9

25 Feb 1991

5340-14-549-4246
Mounting Bracket

145494246
V003024: RNCC: 3 | RNVC: 2

3 Apr 2006

5340-14-242-2559
Retaining Strap

142422559
C235903: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-486-4840
Retaining Strap

144864840
1027592T00: RNCC: 3 | RNVC: 2

21 Mar 1997

5340-14-537-4872
Cushioning Pad

145374872
6501DME131007: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-348-6046
Bow Handle

143486046
20172: RNCC: 3 | RNVC: 2
20172: RNCC: 5 | RNVC: 2
3801415: RNCC: 5 | RNVC: 2
77066976: RNCC: 5 | RNVC: 2
2688238640: RNCC: 5 | RNVC: 2
2688238640: RNCC: 5 | RNVC: 9

19 Apr 1978

5340-14-338-5922
Loop Clamp

143385922
194058: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-325-9123
Key Blank

143259123
25511B8X16XC38: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-524-0314
Rod Retainer Clip

145240314
891023-CR412: RNCC: 3 | RNVC: 9

22 Feb 2001

5340-14-334-4616
Webbing Strap

143344616
120130: RNCC: 3 | RNVC: 2

1 Jun 1976

5340-14-535-4219
Angle Bracket

145354219
5430065281: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-468-6449
Bow Handle

144686449
03-02-0005: RNCC: 3 | RNVC: 2
03.02.0005: RNCC: 5 | RNVC: 2

15 Mar 1994

5340-14-368-5504
Bumper

143685504
027128: RNCC: 3 | RNVC: 9
85-691-3139: RNCC: 6 | RNVC: 9

20 Feb 1981

5340-14-500-7984
Loop Clamp

145007984
615-307-6: RNCC: 3 | RNVC: 2
6600149-101-37: RNCC: 3 | RNVC: 2
F300 0T 024 8184: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-413-1516
Mounting Plate

144131516
23115865-5: RNCC: 3 | RNVC: 2
23115865: RNCC: 5 | RNVC: 2

26 Nov 1986

5340-14-394-4004
Cover Strip

143944004
366A25-0027-05: RNCC: 3 | RNVC: 2
366A250027-05: RNCC: 5 | RNVC: 2

28 Aug 1984

5340-14-496-9077
Access Cover

144969077
NO PRIMARY REF14-496-9077: RNCC: 3 | RNVC: 2
270-01-89212: RNCC: 5 | RNVC: 9
F300 0T 022 2573: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-527-1038
Mounting Bracket

145271038
21224438-01: RNCC: 3 | RNVC: 2
21416663-4: RNCC: 5 | RNVC: 2

3 Oct 2001

5340-14-456-3274
Rod End Clevis

144563274
J05402-01-1801P005: RNCC: 3 | RNVC: 2

25 Jun 1992

5340-14-550-9099
Cover Strip

145509099
RA1B701916566: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-539-6843
Mounting Bracket

145396843
219737: RNCC: 3 | RNVC: 2

28 Jan 2004

5340-14-228-1573
Mending Plate

142281573
0452510: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-500-4531
Mounting Plate

145004531
D63206000048: RNCC: 3 | RNVC: 2
F300 0T 024 4700: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-210-5644
Mending Plate

142105644
70888236: RNCC: 3 | RNVC: 2
70888236: RNCC: 5 | RNVC: 9
888236: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-443-7011
Mounting Plate

144437011
2268500060: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-14-402-0037
Angle Bracket

144020037
26079K: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-520-6671
Loop Clamp

145206671
51313110013: RNCC: 3 | RNVC: 2
432229: RNCC: 5 | RNVC: 2

30 May 2000

5340-14-460-7784
Mounting Plate

144607784
1121A: RNCC: 3 | RNVC: 9

9 Feb 1993

5340-14-508-0109
Mounting Bracket

145080109
4773120910: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-320-6033
Control Rod

143206033
190069: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-498-6618
Mounting Plate

144986618
5000072752: RNCC: 3 | RNVC: 2
5000072752: RNCC: 5 | RNVC: 9
F300 0T 007 4330: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-529-0606
Loop Clamp

145290606
10622968: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-14-545-6850
Angle Bracket

145456850
RA1M703750151N1: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-417-0837
Cushioning Pad

144170837
530315: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-14-535-2344
Mounting Plate

145352344
RA1M701636431A1: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-259-6768
Bumper

142596768
810046: RNCC: 3 | RNVC: 2
0023552428: RNCC: 5 | RNVC: 2
0023552428: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-554-0172
Mounting Bracket

145540172
358 118: RNCC: 3 | RNVC: 2
358 118: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-14-548-8582
Mounting Bracket

145488582
0298700530: RNCC: 3 | RNVC: 2

20 Feb 2006

5340-14-256-5655
Angle Bracket

142565655
811401: RNCC: 3 | RNVC: 2
811401: RNCC: 5 | RNVC: 2
811401: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-461-3856
Mounting Bracket

144613856
7413-88: RNCC: 3 | RNVC: 2
9253448480: RNCC: 5 | RNVC: 2

10 Mar 1993

5340-14-465-6865
Mounting Bracket

144656865
81022-10-2: RNCC: 3 | RNVC: 2

6 Oct 1993

5340-14-470-9863
Rod End Clevis

144709863
37175-1: RNCC: 3 | RNVC: 2
85-695-3324: RNCC: 6 | RNVC: 9

20 Jul 1994

5340-14-371-9499
Bridge Clamp

143719499
2512066: RNCC: 3 | RNVC: 2
2512066: RNCC: 5 | RNVC: 2
3-016-22-171000-15: RNCC: 5 | RNVC: 9

5 Aug 1981

5340-14-303-1944
Loop Clamp

143031944
A10-50-205-01-0: RNCC: 3 | RNVC: 2
A10-50-205-01-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-557-0804
Utility Access Door

145570804
271438895: RNCC: 3 | RNVC: 2
27143889-5: RNCC: 3 | RNVC: 9

6 May 2008

5340-14-515-8201
Arched Cushion

145158201
NA-1000-0,5: RNCC: 3 | RNVC: 2
S-76: RNCC: 5 | RNVC: 2

10 Aug 1999

5340-14-469-0258
Bumper

144690258
880-52-0-126-0: RNCC: 3 | RNVC: 2
85-695-1991: RNCC: 6 | RNVC: 9

30 Mar 1994

5340-14-455-3448
Loop Clamp

144553448
513131050183: RNCC: 3 | RNVC: 2
21WG18: RNCC: 5 | RNVC: 2

21 May 1992

5340-14-458-0509
Handwheel

144580509
2341NOIR: RNCC: 3 | RNVC: 2

2 Oct 1992

5340-14-332-9018
Retaining Strap

143329018
0000136164: RNCC: 3 | RNVC: 2
136164: RNCC: 5 | RNVC: 9
0000136164: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-430-6037
Bail Handle

144306037
460608: RNCC: 3 | RNVC: 2

22 Mar 1989

5340-14-357-8391
Door Closer

143578391
5000110946: RNCC: 3 | RNVC: 2
5000110946: RNCC: 5 | RNVC: 9

20 Jul 1979

5340-14-297-4594
Mounting Bracket

142974594
Z23: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-532-1480
Mounting Bracket

145321480
23C8360: RNCC: 3 | RNVC: 2

14 Oct 2002

5340-14-303-3750
Clamping Catch

143033750
332068: RNCC: 3 | RNVC: 2
330222: RNCC: 3 | RNVC: 2
395936: RNCC: 5 | RNVC: 2
TID23702: RNCC: 5 | RNVC: 2
332068: RNCC: 5 | RNVC: 9
330222: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-523-3167
Loop Clamp

145233167
406075: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-515-1569
Access Cover

145151569
25673578: RNCC: 3 | RNVC: 2

9 Jul 1999

5340-14-512-0358
Angle Bracket

145120358
0060241: RNCC: 3 | RNVC: 2

3 Feb 1999

5340-14-502-7233
Access Cover

145027233
1171280: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-401-3662
Access Cover

144013662
29738610: RNCC: 3 | RNVC: 2
29738610: RNCC: 5 | RNVC: 9

5 Jun 1985

5340-14-358-4902
Pipe Hanger

143584902
17952: RNCC: 3 | RNVC: 2

13 Aug 1979

5340-14-446-4996
Rod End Clevis

144464996
81452278: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-14-280-6697
Locking Stay

142806697
33208: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-455-5985
Mounting Bracket

144555985
20322597: RNCC: 3 | RNVC: 2
20322597: RNCC: 5 | RNVC: 9

28 May 1992

5340-14-470-1924
Access Cover

144701924
405318: RNCC: 3 | RNVC: 2

8 Jun 1994

5340-14-441-9177
Access Cover

144419177
E05800203: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-520-3432
Access Cover

145203432
40147189: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-338-7301
Anchor Strap

143387301
181687: RNCC: 3 | RNVC: 2
5171526200: RNCC: 3 | RNVC: 2
715262: RNCC: 5 | RNVC: 2

17 Dec 1976

5340-14-530-9131
Mounting Bracket

145309131
8036776E00: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-14-446-5152
Rod End Clevis

144465152
R12608D8BBT: RNCC: 2 | RNVC: 2

20 Mar 1991

5340-14-383-5298
Access Cover

143835298
18703155: RNCC: 3 | RNVC: 2
18703155: RNCC: 5 | RNVC: 2

11 Apr 1983

5340-14-359-6049
Anchor Strap

143596049
141394002: RNCC: 3 | RNVC: 2
141394002: RNCC: 5 | RNVC: 2

15 Oct 1979

5340-14-442-0995
Mounting Plate

144420995
74155012100: RNCC: 3 | RNVC: 2
426060: RNCC: 5 | RNVC: 1
43449860: RNCC: 5 | RNVC: 2

1 Oct 1990

5340-14-391-5679
Anchor Strap

143915679
0000771795: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-460-0115
Utility Access Door

144600115
39449720: RNCC: 3 | RNVC: 2
39449720: RNCC: 5 | RNVC: 9

7 Jan 1993

5340-14-516-2198
Access Cover

145162198
0020462: RNCC: 3 | RNVC: 2

15 Sep 1999

5340-14-404-5714
Plug Button

144045714
33141124: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-476-6718
Access Cover

144766718
45463422: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-14-466-3224
Access Cover

144663224
5000728952: RNCC: 3 | RNVC: 2
89287690: RNCC: 5 | RNVC: 2

3 Nov 1993

5340-14-359-7276
Rod End Clevis

143597276
BAZ3370: RNCC: 3 | RNVC: 2

15 Oct 1979

5340-14-382-9447
Access Cover

143829447
33161: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-367-4551
Access Cover

143674551
15626825: RNCC: 3 | RNVC: 2
15626825: RNCC: 5 | RNVC: 2
15626825: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-477-0397
Access Cover

144770397
3432478: RNCC: 3 | RNVC: 2

19 Jul 1995

5340-14-480-3187
Access Cover

144803187
2022108: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-369-5330
Anchor Strap

143695330
16685935: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-443-0325
Access Cover

144430325
511F250: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-14-386-7342
Access Cover

143867342
20174936: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-393-7767
Butt Hinge

143937767
911171: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-528-4955
Mounting Plate

145284955
1SH41731150: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-441-1061
Loop Clamp

144411061
20191341: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-250-7754
Rod End Clevis

142507754
0383680: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-444-9063
Access Cover

144449063
561604: RNCC: 3 | RNVC: 2

28 Jan 1991

5340-14-361-1984
Anchor Strap

143611984
BAZ95353: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-517-4498
Mounting Bracket

145174498
T711A1002203: RNCC: 3 | RNVC: 2

15 Dec 1999

5340-14-475-9837
Mounting Plate

144759837
4640309A: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-399-9935
Access Cover

143999935
605074: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-523-5172
Mounting Bracket

145235172
31025281: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-14-539-5046
Loop Clamp

145395046
2516.042: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-450-8909
Pipe Hanger

144508909
PM1A726142520: RNCC: 3 | RNVC: 2
PM1A726142520: RNCC: 5 | RNVC: 2

23 Oct 1991

5340-14-509-1598
Mounting Bracket

145091598
ER3204: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-496-8210
Butt Hinge

144968210
DP4: RNCC: 3 | RNVC: 2
F300 0T 022 1584: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-551-2901
Angle Bracket

145512901
RA1M702606023: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-483-5968
Mounting Plate

144835968
47134927: RNCC: 3 | RNVC: 2

19 Sep 1996

5340-14-545-2978
Pipe Hanger

145452978
RA1M701167371N1: RNCC: 3 | RNVC: 2

1 Apr 2005

5340-14-507-6420
Mounting Bracket

145076420
96183333: RNCC: 3 | RNVC: 2
CRAF 885205311: RNCC: 5 | RNVC: 2

7 Aug 1998

5340-14-341-0844
Lock-Release Lever

143410844
16400219: RNCC: 3 | RNVC: 2
16400219: RNCC: 3 | RNVC: 9

16 Mar 1977

5340-14-514-0367
Pipe Hanger

145140367
PM1A726244321: RNCC: 3 | RNVC: 2
PM1A726244321: RNCC: 5 | RNVC: 2

22 Apr 1999

5340-14-476-5260
Access Cover

144765260
3200283: RNCC: 3 | RNVC: 2
72161398: RNCC: 5 | RNVC: 2

19 Jun 1995

5340-14-543-7273
Mounting Plate

145437273
943374593: RNCC: 3 | RNVC: 2

4 Dec 2004

5340-14-519-3427
Bumper

145193427
C256A7111101: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-515-2401
Access Cover

145152401
3534416502: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-382-9655
Retaining Strap

143829655
BAZ98435: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-514-5014
Access Cover

145145014
162233004: RNCC: 3 | RNVC: 2
162233004: RNCC: 5 | RNVC: 2

26 May 1999

5340-14-471-9888
Rod End Clevis

144719888
DA2C202457601A2: RNCC: 3 | RNVC: 2

28 Sep 1994

5340-14-463-3702
Mounting Plate

144633702
16849131: RNCC: 3 | RNVC: 2
16849131: RNCC: 5 | RNVC: 9

9 Jun 1993

5340-14-524-1742
Mounting Plate

145241742
2241400: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-548-2427
Access Cover

145482427
61033880AA: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-14-374-5914
Access Cover

143745914
0031434025: RNCC: 3 | RNVC: 2
0031434025: RNCC: 5 | RNVC: 9
31434025: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-031-8352
Rod End Clevis

140318352
52900: RNCC: 3 | RNVC: 2
VDPM02755: RNCC: 5 | RNVC: 2

5 Jul 1980

5340-14-516-7424
Mounting Bracket

145167424
8007067: RNCC: 3 | RNVC: 2
Y00005934: RNCC: 3 | RNVC: 2
Y00005934: RNCC: 5 | RNVC: 9

13 Oct 1999

5340-14-459-3101
Mounting Plate

144593101
0056817030: RNCC: 3 | RNVC: 2

24 Nov 1992

5340-14-525-7179
Mounting Plate

145257179
20 243 160 7770: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-392-8506
Mending Plate

143928506
219606: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-407-7600
Access Door Hinge

144077600
16300984: RNCC: 3 | RNVC: 2
16300984: RNCC: 5 | RNVC: 9

3 Mar 1986

5340-14-354-1059
Mending Plate

143541059
0120590051: RNCC: 3 | RNVC: 2
0120590051: RNCC: 5 | RNVC: 2

16 Jan 1979

5340-14-547-0408
Rim Lock Set

145470408
1049616Y01: RNCC: 3 | RNVC: 2

16 Sep 2005

5340-14-556-1861
Plug Button

145561861
82403510000: RNCC: 3 | RNVC: 2

11 Feb 2008

5340-14-402-7130
Locking Stay

144027130
4OP319ZW: RNCC: 3 | RNVC: 2
7161: RNCC: 5 | RNVC: 2

19 Jul 1985

5340-14-408-2084
Access Cover

144082084
CPH8T2920001: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-427-1811
Loop Clamp

144271811
MBEU13051: RNCC: 3 | RNVC: 2
033827: RNCC: 5 | RNVC: 2

6 Oct 1988

5340-14-397-5681
Anchor Strap

143975681
0000553059: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-402-7946
Access Cover

144027946
79109644: RNCC: 3 | RNVC: 2
79109644: RNCC: 5 | RNVC: 9

19 Jul 1985

5340-14-375-4624
Bow Handle

143754624
032573: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-552-5509
Angle Bracket

145525509
82190814000: RNCC: 3 | RNVC: 2

16 Jan 2007

5340-14-352-7608
Access Cover

143527608
200113: RNCC: 3 | RNVC: 2
200113: RNCC: 5 | RNVC: 2

14 Nov 1978

5340-14-208-5186
Access Cover

142085186
0000351733: RNCC: 3 | RNVC: 2
0000351733: RNCC: 5 | RNVC: 9
351733: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-546-6604
Filler Opening Cap

145466604
MB50MS: RNCC: 3 | RNVC: 9
91832529: RNCC: 5 | RNVC: 2
MREVFAR 021R: RNCC: 5 | RNVC: 9

26 Jul 2005

5340-14-338-4820
Bow Handle

143384820
05451925: RNCC: 3 | RNVC: 2
05451925: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-14-406-0395
Rod End Clevis

144060395
M4Z5180908220: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-367-4005
Access Cover

143674005
15451791: RNCC: 3 | RNVC: 2
15451791: RNCC: 5 | RNVC: 2
15451791: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-439-0716
Mounting Plate

144390716
DLT116061: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-14-429-8614
Angle Bracket

144298614
61903: RNCC: 3 | RNVC: 2
61903: RNCC: 5 | RNVC: 2

15 Feb 1989

5340-14-517-6390
Mounting Plate

145176390
CRM280110591A1: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-458-6896
Mounting Plate

144586896
44DA00-702430A: RNCC: 3 | RNVC: 2
89425875: RNCC: 5 | RNVC: 2
0702430A00: RNCC: 5 | RNVC: 2

29 Oct 1992

5340-14-448-0489
Loop Clamp

144480489
PM1A275113334: RNCC: 3 | RNVC: 2
PM1A275113334: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-210-8163
Retaining Strap

142108163
802S: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-409-0574
Anchor Strap

144090574
72522: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-545-7435
Loop Clamp

145457435
1137990930: RNCC: 3 | RNVC: 2

5 May 2005

5340-14-476-0926
Angle Bracket

144760926
222-3018-394: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-222-7902
Snap Hook

142227902
LFP54-390: RNCC: 3 | RNVC: 2
2559M: RNCC: 5 | RNVC: 9
LFP54-390: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-321-4149
Rod End Connector

143214149
GSM294-010F17: RNCC: 3 | RNVC: 2
GSM294-010AF17: RNCC: 5 | RNVC: 2
A0049-002F20: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-435-1236
Flush Catch

144351236
Z360-001-000D: RNCC: 3 | RNVC: 2

18 Oct 1989

5340-14-379-7451
Access Cover

143797451
27101420-7: RNCC: 3 | RNVC: 2
M389-200015: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-380-1394
Rope Cleat

143801394
73-063-22-2: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-497-8354
Butt Hinge

144978354
42-1-3300: RNCC: 3 | RNVC: 2
45488815: RNCC: 5 | RNVC: 2
45488815: RNCC: 5 | RNVC: 9

22 Oct 1997

5340-14-403-9694
Butt Hinge

144039694
613877: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-371-7117
Corner Brace

143717117
407502020108: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-541-2684
Loop Clamp

145412684
511131005017: RNCC: 3 | RNVC: 2

26 May 2004

5340-14-518-9920
Elastic Strap

145189920
707319: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-279-6398
Rim Lock

142796398
16GD0RE4262CHR0ME40MM: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-349-2313
Webbing Strap

143492313
225498REP1: RNCC: 3 | RNVC: 2
225498REP1: RNCC: 5 | RNVC: 9

22 May 1978

5340-14-522-7756
Mounting Bracket

145227756
46179384: RNCC: 3 | RNVC: 2

22 Nov 2000

5340-14-507-9541
Access Cover

145079541
10378054: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-526-0979
Locking Stay

145260979
T711A1001125: RNCC: 3 | RNVC: 2

4 Jul 2001

5340-14-408-0977
Access Cover

144080977
0308120390: RNCC: 3 | RNVC: 2
89404298: RNCC: 5 | RNVC: 2

19 Mar 1986

5340-14-375-8302
Access Cover

143758302
16559844: RNCC: 3 | RNVC: 2
16559844: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-518-1568
Angle Bracket

145181568
5010054350: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-341-2430
Rod End Clevis

143412430
411632: RNCC: 3 | RNVC: 2
411632: RNCC: 5 | RNVC: 2
411632: RNCC: 5 | RNVC: 9

16 Mar 1977

5340-14-382-5502
Access Cover

143825502
16764693: RNCC: 3 | RNVC: 2
16764693: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-448-2599
Mounting Bracket

144482599
318109: RNCC: 3 | RNVC: 2
318109: RNCC: 5 | RNVC: 9

18 Jun 1991

5340-14-327-7850
Bail Handle

143277850
J36161LAIT0N: RNCC: 2 | RNVC: 2

2 Jul 1975

5340-14-480-2274
Mounting Plate

144802274
0870326Q00: RNCC: 3 | RNVC: 2

28 Feb 1996

5340-14-532-1336
Mounting Plate

145321336
5010559646: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-14-454-1067
Mounting Bracket

144541067
16959373: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-456-9704
Plate Spacer

144569704
747048: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-14-480-3831
Access Cover

144803831
35 59 06: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-482-0972
Mounting Plate

144820972
22456220: RNCC: 3 | RNVC: 2
22456220: RNCC: 5 | RNVC: 9

20 Jun 1996

5340-14-534-2467
Access Cover

145342467
DA1S121517510: RNCC: 3 | RNVC: 2

19 Mar 2003

5340-14-518-1676
Mounting Bracket

145181676
5010093666: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-421-3775
Access Cover

144213775
39144754: RNCC: 3 | RNVC: 2

14 Jan 1988

5340-14-425-1473
Access Cover

144251473
0864807D00: RNCC: 3 | RNVC: 2

22 Jun 1988

5340-14-417-3211
Access Cover

144173211
543029: RNCC: 3 | RNVC: 2
00543029: RNCC: 5 | RNVC: 2

1 Jul 1987

5340-14-528-0320
Access Cover

145280320
45641093: RNCC: 3 | RNVC: 2

12 Dec 2001

5340-14-305-7955
Access Cover

143057955
381C66513H1DET2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-379-3703
Loop Clamp

143793703
13-73530: RNCC: 3 | RNVC: 9

1 Oct 1982

5340-14-310-2290
Access Cover

143102290
536MF14DET6: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-370-6633
Anchor Strap

143706633
185046: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-413-9629
Retaining Strap

144139629
ST400S60P152: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-534-8531
Mounting Plate

145348531
10620658: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-14-261-7498
Access Cover

142617498
01005000300: RNCC: 3 | RNVC: 2
010050003: RNCC: 5 | RNVC: 2
26KM27: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-480-6297
Access Cover

144806297
2022133: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-423-0485
Pipe Hanger

144230485
721200207: RNCC: 3 | RNVC: 2
89174183: RNCC: 5 | RNVC: 2
721200207: RNCC: 5 | RNVC: 9

31 Mar 1988

5340-14-512-5812
Mounting Bracket

145125812
3BM02582AAAA: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-264-7915
Rod End Clevis

142647915
STH156844: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-442-1613
Butt Hinge

144421613
16576476: RNCC: 3 | RNVC: 2

3 Oct 1990

5340-14-372-4921
Bumper

143724921
B0188-009F19: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-372-7893
Access Cover

143727893
304-013-401-0: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-297-3128
Retaining Strap

142973128
501-709-114-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-534-0403
Mounting Bracket

145340403
4SH11710904: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-14-209-9244
Retaining Strap

142099244
765S: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-418-0748
Retaining Clip

144180748
NO PRIMARY REF14-418-0748: RNCC: 3 | RNVC: 2
67310: RNCC: 5 | RNVC: 9

6 Aug 1987

5340-14-531-9268
Lock Key

145319268
2531.000: RNCC: 3 | RNVC: 2

25 Sep 2002

5340-14-539-6473
Retaining Strap

145396473
21227460-00: RNCC: 3 | RNVC: 2
21227460-2: RNCC: 5 | RNVC: 2

28 Jan 2004

5340-14-475-1735
Loop Clamp

144751735
51311706032: RNCC: 3 | RNVC: 2
574838: RNCC: 5 | RNVC: 2

22 Mar 1995

5340-14-493-6207
Padlock

144936207
1322-45: RNCC: 3 | RNVC: 2
F300 0T 013 9553: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-458-3069
Synchro Clamp

144583069
5000658697: RNCC: 3 | RNVC: 2
89287562: RNCC: 5 | RNVC: 2

15 Oct 1992

5340-14-515-4047
Mounting Plate

145154047
20730001A: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-520-3235
Mounting Plate

145203235
46428423: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-465-6255
Bolt And Spacer Kit

144656255
1073727Y00: RNCC: 3 | RNVC: 2

5 Oct 1993

5340-14-506-2959
Retaining Strap

145062959
38511720: RNCC: 3 | RNVC: 2
38511720: RNCC: 5 | RNVC: 9

22 Apr 1998

5340-14-500-8383
Mounting Bracket

145008383
E65102110000: RNCC: 3 | RNVC: 2
F300 0T 024 8585: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-490-0887
Angle Bracket

144900887
29406941: RNCC: 3 | RNVC: 2

10 Sep 1997

5340-14-466-1774
Mounting Plate

144661774
165533: RNCC: 3 | RNVC: 2
89170077: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-531-8571
Loop Clamp

145318571
19A190: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-14-549-4937
Mounting Plate

145494937
MC201-215100-00: RNCC: 3 | RNVC: 2

11 Apr 2006

5340-14-430-5264
Butt Hinge

144305264
PM1A127231009: RNCC: 3 | RNVC: 2
PM1A127231009: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-518-6241
Access Cover

145186241
5010240714: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-388-7990
Rod End Clevis

143887990
418101201: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-553-8000
Loop Clamp

145538000
120 047: RNCC: 3 | RNVC: 2
120 047: RNCC: 3 | RNVC: 2

22 May 2007

5340-14-533-6592
Access Cover

145336592
F1262225: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-14-382-2358
Angle Bracket

143822358
A21A221372010: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-313-7088
Synchro Clamp

143137088
0202117480: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-483-1460
Butt Hinge

144831460
200126370: RNCC: 3 | RNVC: 9

15 Aug 1996

5340-14-488-6668
Synchro Clamp

144886668
3BT01315AAAA: RNCC: 3 | RNVC: 2
3BT01315AAAA: RNCC: 5 | RNVC: 9

28 May 1997

5340-14-485-1207
Bridge Clamp

144851207
84005263: RNCC: 3 | RNVC: 2

10 Jan 1997

5340-14-517-1429
Cover Strip

145171429
T641A1207101: RNCC: 3 | RNVC: 2

10 Nov 1999

5340-14-539-9694
Detent Plunger

145399694
RA1B701430617A2: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-470-4187
Mounting Bracket

144704187
0390720230: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-360-1679
Pipe Hanger

143601679
A11A221172260A1: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-514-0408
Section Block Clamp

145140408
PM1A742699013: RNCC: 3 | RNVC: 2
PM1A742699013: RNCC: 5 | RNVC: 2

22 Apr 1999

5340-14-443-5878
Webbing Strap

144435878
39538275: RNCC: 3 | RNVC: 2
39538275: RNCC: 5 | RNVC: 9

28 Nov 1990

5340-14-209-9349
Retaining Bail

142099349
3841-51: RNCC: 3 | RNVC: 2
3841-51: RNCC: 5 | RNVC: 2
3841-51: RNCC: 6 | RNVC: 9

1 Jan 1964

5340-14-502-6139
Mounting Bracket

145026139
5010215667: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-216-6504
Bumper

142166504
27082: RNCC: 3 | RNVC: 9

1 Jan 1965

5340-14-545-6988
Mounting Bracket

145456988
RA1A703656311: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-385-4639
Mounting Plate

143854639
BB2589: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-532-1338
Mounting Plate

145321338
5010559687: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-14-531-6643
Runner

145316643
8037119F00: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-14-538-0579
Lock Bolt

145380579
NGM0010030631001: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-533-4137
Mounting Bracket

145334137
5010323559: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-397-8875
Bow Handle

143978875
40810673: RNCC: 3 | RNVC: 2
F316: RNCC: 5 | RNVC: 2

31 Jan 1985

5340-14-532-1998
Mounting Bracket

145321998
19220950: RNCC: 3 | RNVC: 2

16 Oct 2002

5340-14-515-3276
Mounting Bracket

145153276
3533606028: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-423-0611
Shelf Bracket

144230611
39529068: RNCC: 3 | RNVC: 2
39529068: RNCC: 5 | RNVC: 9

31 Mar 1988

5340-14-526-5946
Bow Handle

145265946
44037178: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-517-0092
Bridge Clamp

145170092
RA1M794200842: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-433-8340
Surface Bolt

144338340
071462Z: RNCC: 3 | RNVC: 2

16 Aug 1989

5340-14-459-1406
Bumper

144591406
409776: RNCC: 3 | RNVC: 2

19 Nov 1992

5340-14-202-3124
Loop Clamp

142023124
STD47: RNCC: 3 | RNVC: 2
STD47: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-14-545-8053
Mounting Bracket

145458053
10635449: RNCC: 3 | RNVC: 2

16 May 2005

5340-14-411-4225
Wiring Harness

144114225
A11A704103270: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-545-7560
Mounting Plate

145457560
202914: RNCC: 3 | RNVC: 2

10 May 2005

5340-14-382-5204
Angle Bracket

143825204
16762513: RNCC: 3 | RNVC: 2
16762513: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-429-9411
Synchro Clamp

144299411
L1007D1: RNCC: 3 | RNVC: 2
026200266100: RNCC: 5 | RNVC: 2

17 Feb 1989

5340-14-367-0020
Pipe Hanger

143670020
CT52-850-033: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-464-4640
Cushioning Pad

144644640
350A41-0172-26: RNCC: 3 | RNVC: 2

4 Aug 1993

5340-14-361-5246
Bumper

143615246
B0278-005F9: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-458-9723
Angle Bracket

144589723
0641-205-100: RNCC: 3 | RNVC: 2

10 Nov 1992

5340-14-382-6672
Butt Hinge

143826672
365A58-1091-01: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-425-0150
Mounting Bracket

144250150
JVCIT04-02: RNCC: 3 | RNVC: 2
89415193: RNCC: 5 | RNVC: 2

16 Jun 1988

5340-14-353-8990
Handwheel

143538990
GSM137-013F5: RNCC: 3 | RNVC: 2
GSM137-13F5: RNCC: 5 | RNVC: 2

16 Jan 1979

5340-14-470-5467
Anchor Strap

144705467
EA5M707-086: RNCC: 3 | RNVC: 2

22 Jun 1994

5340-14-539-6516
Mounting Bracket

145396516
21231539-00: RNCC: 3 | RNVC: 2
21231539-6: RNCC: 5 | RNVC: 2

28 Jan 2004

5340-14-297-1380
Pipe Hanger

142971380
MY20515-13810-1: RNCC: 3 | RNVC: 2
MY20-515-13-810-1: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-507-6462
Angle Bracket

145076462
29471287: RNCC: 3 | RNVC: 2

7 Aug 1998

5340-14-372-2455
Anchor Strap

143722455
334028001: RNCC: 3 | RNVC: 2
334028001: RNCC: 5 | RNVC: 9

1 Sep 1981

5340-14-440-9905
Plug Button

144409905
20348419: RNCC: 3 | RNVC: 2

9 Aug 1990

5340-14-498-4942
Mounting Bracket

144984942
91971467: RNCC: 3 | RNVC: 2
M80300548907W: RNCC: 3 | RNVC: 2
F300 0T 005 3243: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-517-2696
Access Cover

145172696
F1309580: RNCC: 3 | RNVC: 2

24 Nov 1999

5340-14-508-0992
Bumper

145080992
D13663: RNCC: 3 | RNVC: 2
A09060233: RNCC: 5 | RNVC: 9

26 Aug 1998

5340-14-405-8239
Angle Bracket

144058239
0496-2055: RNCC: 3 | RNVC: 2

4 Dec 1985

5340-14-546-1784
Angle Bracket

145461784
RA1B701326119: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-541-5434
Mounting Plate

145415434
2092614: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-479-7331
Lock Bolt

144797331
0194051M16-04-P15: RNCC: 3 | RNVC: 2

31 Jan 1996

5340-14-544-0642
Mounting Plate

145440642
AMPC GENE E227303: RNCC: 3 | RNVC: 2

25 Dec 2004

5340-14-356-5608
Loop Clamp

143565608
TLH0TM111: RNCC: 3 | RNVC: 2

15 May 1979

5340-14-368-3790
Rim Lock Set

143683790
EL11AP+CLE22653T: RNCC: 3 | RNVC: 2
EL11APAVECCLEEL22653: RNCC: 5 | RNVC: 2
91501685: RNCC: 5 | RNVC: 2
EL11AP+CLE22653T: RNCC: 5 | RNVC: 9
EL11APAVECCLEEL22653: RNCC: 5 | RNVC: 9

20 Feb 1981

5340-14-354-8337
Access Cover

143548337
5156173900: RNCC: 3 | RNVC: 2
561739: RNCC: 5 | RNVC: 2

20 Feb 1979

5340-14-555-8389
Runner

145558389
61057312AA: RNCC: 3 | RNVC: 2

18 Dec 2007

5340-14-539-8788
Lever Bracket

145398788
02640903500: RNCC: 3 | RNVC: 2

17 Feb 2004

5340-14-420-7409
Access Cover

144207409
353781: RNCC: 3 | RNVC: 2

16 Dec 1987

Load More Results