What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 84 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 84 of 446

5340-14-439-8346
Corner Brace

144398346
332A58-1326-01: RNCC: 3 | RNVC: 2

23 May 1990

5340-14-499-1124
Webbing Strap

144991124
NO PRIMARY REF14-499-1124: RNCC: 3 | RNVC: 2
A09070526: RNCC: 5 | RNVC: 9
A09070537: RNCC: 5 | RNVC: 9
F300 0T 018 3097: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-474-3085
Rod End Connector

144743085
144810: RNCC: 3 | RNVC: 2

8 Feb 1995

5340-14-501-4464
Pipe Hanger

145014464
307-851-403-0: RNCC: 3 | RNVC: 2

29 Oct 1997

5340-14-432-3492
Mounting Bracket

144323492
160G722231-10: RNCC: 3 | RNVC: 2

7 Jun 1989

5340-14-319-9754
Mortise Lock Set

143199754
911C: RNCC: 3 | RNVC: 2
M4ZS460D8388A: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-281-7316
Rim Latch Set

142817316
NO PRIMARY REF14-281-7316: RNCC: 3 | RNVC: 2
232BT38F0UGA: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-536-7932
Bow Handle

145367932
11-650-117-8: RNCC: 3 | RNVC: 2

17 Sep 2003

5340-14-388-9432
Rod End Clevis

143889432
ST159-2M517P65: RNCC: 3 | RNVC: 2
ST159-2M517P65B: RNCC: 5 | RNVC: 2

29 Nov 1983

5340-14-261-7434
Access Cover

142617434
01096000700: RNCC: 3 | RNVC: 2
302783: RNCC: 5 | RNVC: 2
010960007: RNCC: 5 | RNVC: 2
53K107-108: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-501-4356
Mounting Bracket

145014356
460556: RNCC: 3 | RNVC: 2
132088IP236B: RNCC: 5 | RNVC: 2
460556-001: RNCC: 5 | RNVC: 9

29 Oct 1997

5340-14-403-9163
Access Cover

144039163
NO PRIMARY REF14-403-9163: RNCC: 3 | RNVC: 2
P4H020774-00: RNCC: 5 | RNVC: 9

11 Sep 1985

5340-14-260-0604
Lock Bolt

142600604
321A58-0413-03: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-264-1703
Loop Clamp

142641703
55217-216DB: RNCC: 3 | RNVC: 2
55217-216-000DB: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-522-9071
Mounting Plate

145229071
500-75-00-9: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-14-345-2779
Loop Clamp

143452779
FF1E701-65: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-461-1664
Plate Spacer

144611664
75445639: RNCC: 3 | RNVC: 2
1452-08: RNCC: 3 | RNVC: 2
7544563980: RNCC: 5 | RNVC: 2
5445639: RNCC: 5 | RNVC: 2

24 Feb 1993

5340-14-256-4324
Pipe Hanger

142564324
C0LLIERAVIS26-6-35CHR0MATE: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-392-7500
Access Cover

143927500
NO PRIMARY REF14-392-7500: RNCC: 3 | RNVC: 2
12238850: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-14-396-2558
Quick Release Pin

143962558
7199-322: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-505-7255
Rim Lock

145057255
4304-05-2: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-232-1001
Clamping Catch

142321001
NO PRIMARY REF14-232-1001: RNCC: 3 | RNVC: 2
380917: RNCC: 5 | RNVC: 2
G02: RNCC: 5 | RNVC: 2
201017: RNCC: 5 | RNVC: 2
12440069-9: RNCC: 5 | RNVC: 2
26984: RNCC: 5 | RNVC: 2
1014200: RNCC: 5 | RNVC: 9
2014200: RNCC: 5 | RNVC: 9
3014200: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-365-3205
Loop Clamp

143653205
650-403-008-0: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-318-3559
Butt Hinge

143183559
26-710506-13: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-296-2977
Rod End Connector

142962977
A1-64698: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-282-2082
Access Cover

142822082
262-20-18360-83: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-454-0437
Mounting Plate

144540437
F77301-67: RNCC: 3 | RNVC: 2
1304156: RNCC: 5 | RNVC: 2
F77301-67: RNCC: 5 | RNVC: 2

19 Mar 1992

5340-14-440-3299
Butt Hinge

144403299
332A65-1153-20: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-544-3003
Butt Hinge

145443003
708010S114-12B: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-14-553-5484
Mounting Bracket

145535484
3730B80-04: RNCC: 3 | RNVC: 2

16 Apr 2007

5340-14-340-3538
Angle Bracket

143403538
M3C708-21-01: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-383-5933
Rod End Clevis

143835933
TB30-17157-100: RNCC: 3 | RNVC: 2
TB30-17157-100: RNCC: 5 | RNVC: 2

11 Apr 1983

5340-14-539-7804
Mounting Bracket

145397804
94148T41-151: RNCC: 3 | RNVC: 2

6 Feb 2004

5340-14-298-8492
Turnbuckle Body

142988492
7-098-034: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-501-2211
Access Cover

145012211
426113-521.10.09.10: RNCC: 3 | RNVC: 2
426113-521-10-09-10: RNCC: 3 | RNVC: 2
F300 0T 025 2616: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-506-7457
Access Cover

145067457
369379: RNCC: 3 | RNVC: 2

13 May 1998

5340-14-271-0010
Retaining Strap

142710010
202932: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-452-9180
Rod End Clevis

144529180
4049194: RNCC: 3 | RNVC: 2
4049194: RNCC: 5 | RNVC: 9

28 Jan 1992

5340-14-433-4671
Rod End Clevis

144334671
071216F: RNCC: 3 | RNVC: 2

31 Jul 1989

5340-14-484-1137
Anchor Strap

144841137
00090537: RNCC: 3 | RNVC: 2
5010099513: RNCC: 5 | RNVC: 2

24 Oct 1996

5340-14-520-1434
Utility Access Door

145201434
52746: RNCC: 3 | RNVC: 2
SDM52746: RNCC: 5 | RNVC: 9

16 May 2000

5340-14-469-3884
Access Cover

144693884
BFC20174: RNCC: 3 | RNVC: 2
89171587: RNCC: 5 | RNVC: 2

20 Apr 1994

5340-14-357-9299
Retaining Strap

143579299
TH20A1307: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-14-439-8004
Access Cover

144398004
MG100074: RNCC: 3 | RNVC: 2
91583631: RNCC: 5 | RNVC: 2

23 May 1990

5340-14-311-1370
Rim Lock Set

143111370
1083A6CLEF3124E: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-456-0003
Pipe Hanger

144560003
1030910025: RNCC: 3 | RNVC: 2
1030910025: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-512-1834
Retaining Clip

145121834
M6312RAL9001: RNCC: 3 | RNVC: 2
M6312RAL9001: RNCC: 5 | RNVC: 2
M6312BLANC: RNCC: 5 | RNVC: 2

8 Feb 1999

5340-14-399-3858
Rod End Clevis

143993858
79092898: RNCC: 3 | RNVC: 2
79092898: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-481-3480
Access Cover

144813480
34 98 83: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-354-2790
Access Cover

143542790
0016830240: RNCC: 3 | RNVC: 2
0016830240: RNCC: 5 | RNVC: 9

30 Jan 1979

5340-14-340-2520
Access Cover

143402520
183978: RNCC: 3 | RNVC: 2
5171524000: RNCC: 5 | RNVC: 2
715240: RNCC: 5 | RNVC: 2

14 Feb 1977

5340-14-434-0053
Access Cover

144340053
534825: RNCC: 3 | RNVC: 2

29 Aug 1989

5340-14-485-5861
Mounting Plate

144855861
PL1NA003AA012604: RNCC: 3 | RNVC: 2

30 Jan 1997

5340-14-551-2771
Angle Bracket

145512771
RA1B701716281: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-266-0846
Retaining Strap

142660846
20400ABRIDEMILIEU: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-550-4841
Mounting Bracket

145504841
RA1A702726011: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-330-1317
Handwheel

143301317
PT126E: RNCC: 3 | RNVC: 2
PT126C: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-488-6643
Mounting Bracket

144886643
3BM01322AAAA: RNCC: 3 | RNVC: 2
3BM01322AAAA: RNCC: 5 | RNVC: 9

28 May 1997

5340-14-527-7004
Arched Cushion

145277004
8960007: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-14-278-5171
Mending Plate

142785171
20299: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-307-0367
Angle Bracket

143070367
26244364: RNCC: 3 | RNVC: 2
C244364: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-301-0486
Angle Bracket

143010486
1030432504: RNCC: 3 | RNVC: 2
1030432504: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-417-3657
Butt Hinge

144173657
39C60X50DROITECHROME: RNCC: 3 | RNVC: 2
REP1B60X50DROITECHROME: RNCC: 5 | RNVC: 2

6 Jul 1987

5340-14-482-5810
Access Cover

144825810
701488: RNCC: 3 | RNVC: 2

17 Jul 1996

5340-14-374-6134
Access Cover

143746134
5000524490: RNCC: 3 | RNVC: 2
5000524490: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-472-7126
Rod End Clevis

144727126
4095572: RNCC: 3 | RNVC: 2
4095572: RNCC: 5 | RNVC: 9

9 Nov 1994

5340-14-448-0284
Metal Grille

144480284
PM1A233120071: RNCC: 3 | RNVC: 2
PM1A233120071: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-444-7654
Bow Handle

144447654
180844770: RNCC: 3 | RNVC: 2

21 Jan 1991

5340-14-447-8412
Angle Bracket

144478412
5000916023: RNCC: 3 | RNVC: 2

6 Jun 1991

5340-14-451-5428
Access Cover

144515428
39088383: RNCC: 3 | RNVC: 2
39088383: RNCC: 5 | RNVC: 9

21 Nov 1991

5340-14-400-5735
Rod End Clevis

144005735
373117: RNCC: 3 | RNVC: 2
373117: RNCC: 5 | RNVC: 9

8 May 1985

5340-14-378-4633
Pipe Hanger

143784633
8811979601: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-551-3567
Angle Bracket

145513567
RA1A702436151N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-459-1483
Mounting Plate

144591483
16788260: RNCC: 3 | RNVC: 2
16788260: RNCC: 5 | RNVC: 9

19 Nov 1992

5340-14-455-9060
Plate Spacer

144559060
PM1A726266300A2: RNCC: 3 | RNVC: 2
PM1A726266300A2: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-332-9404
Retaining Strap

143329404
193373: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-535-5112
Bumper

145355112
SZ10.300.687: RNCC: 3 | RNVC: 2
10-300-687: RNCC: 3 | RNVC: 2

31 May 2003

5340-14-302-1499
Mending Plate

143021499
A10-22-800-11-0: RNCC: 3 | RNVC: 2
A10-22-800-11-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-517-8015
Lock-Release Lever

145178015
21242494-00: RNCC: 3 | RNVC: 2
21242494-7: RNCC: 5 | RNVC: 2

13 Jan 2000

5340-14-334-1319
Control Rod

143341319
880-57-0-018-0: RNCC: 3 | RNVC: 2

23 Apr 1976

5340-14-392-3764
Loop Clamp

143923764
LS03-003-03: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-372-7900
Retaining Strap

143727900
650-403-041-0: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-489-9264
Loop Clamp

144899264
650-402-512-0: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-14-320-0945
Rod End Clevis

143200945
105-06-14-5: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-366-9264
Rod End Clevis

143669264
960-022-006-1: RNCC: 3 | RNVC: 2
VDPM3026: RNCC: 5 | RNVC: 2

11 Dec 1980

5340-14-546-2514
Cover Strip

145462514
CCM601-131-452: RNCC: 3 | RNVC: 2

20 Jun 2005

5340-14-281-7218
Runner

142817218
NO PRIMARY REF14-281-7218: RNCC: 3 | RNVC: 2
C2: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-389-4624
Angle Bracket

143894624
365A57-3296-21: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-429-6884
Retaining Strap

144296884
P182503003: RNCC: 3 | RNVC: 2
P1-82-503003: RNCC: 5 | RNVC: 2

8 Feb 1989

5340-14-391-4305
Retaining Clip

143914305
NO PRIMARY REF14-391-4305: RNCC: 3 | RNVC: 2
24426: RNCC: 5 | RNVC: 9

1 Mar 1984

5340-14-473-3822
Mounting Plate

144733822
332A25-1287-20: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-341-1869
Access Cover

143411869
M3B702-35-02: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-531-8252
Butt Hinge

145318252
341A65-7714-22: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-444-5507
Webbing Strap

144445507
TB3011415: RNCC: 1 | RNVC: 2
LE13089-023-008: RNCC: 3 | RNVC: 2
5140: RNCC: 5 | RNVC: 2

15 Jan 1991

5340-14-462-5526
Shimmy Damper

144625526
6446-51: RNCC: 3 | RNVC: 2
7920069718: RNCC: 5 | RNVC: 2
9406446518: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-338-3293
Detent Plunger

143383293
SP1-01-03-26: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-397-6426
Bow Handle

143976426
10501-005: RNCC: 3 | RNVC: 2
10501-005: RNCC: 3 | RNVC: 2
RAR3440: RNCC: 5 | RNVC: 2

14 Dec 1984

5340-14-501-9572
Mounting Bracket

145019572
332A52-1030-0051: RNCC: 3 | RNVC: 2

19 Nov 1997

5340-14-319-1481
Retaining Strap

143191481
NO PRIMARY REF14-319-1481: RNCC: 3 | RNVC: 2
258579: RNCC: 5 | RNVC: 9
S258579: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-410-7570
Rod End Clevis

144107570
A02560-01-2000P004: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-465-5104
Butt Hinge

144655104
366A25-1250-20: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-224-6082
Bumper

142246082
536-416-007DET11: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-533-7441
Angle Bracket

145337441
168E207-00: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-14-520-4289
Access Cover

145204289
M45AA0101-110: RNCC: 3 | RNVC: 2
M45AA0101-110: RNCC: 5 | RNVC: 9

17 May 2000

5340-14-390-3179
Butt Hinge

143903179
01-14130-006: RNCC: 3 | RNVC: 2
01-14-130-006: RNCC: 5 | RNVC: 2
85-692-4791: RNCC: 6 | RNVC: 9

26 Jan 1984

5340-14-472-8917
Access Cover

144728917
332A72-1720-00: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-496-9081
Mounting Bracket

144969081
NO PRIMARY REF14-496-9081: RNCC: 3 | RNVC: 2
270-01-89218: RNCC: 5 | RNVC: 9
F300 0T 022 2577: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-246-2747
Retaining Strap

142462747
RR63-12-2-1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-533-8965
Mounting Plate

145338965
08-704-075: RNCC: 3 | RNVC: 2
SZ08.704.075: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-522-2492
Utility Access Door

145222492
CRP401-381-460N2: RNCC: 3 | RNVC: 2

12 Oct 2000

5340-14-533-6061
Mounting Bracket

145336061
708010S925-00A: RNCC: 3 | RNVC: 2

12 Feb 2003

5340-14-485-6713
Mounting Bracket

144856713
A10A65-674-30-0: RNCC: 3 | RNVC: 2
A10A65-674-30-0: RNCC: 5 | RNVC: 2

6 Feb 1997

5340-14-454-3991
Mounting Bracket

144543991
41-17171C: RNCC: 3 | RNVC: 2
41-17171C: RNCC: 5 | RNVC: 9

1 Apr 1992

5340-14-440-6909
Loop Holder

144406909
332P08-1065-00: RNCC: 3 | RNVC: 2

18 Jul 1990

5340-14-297-5676
Access Cover

142975676
78241-449: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-539-4284
Mounting Bracket

145394284
21429533-00: RNCC: 3 | RNVC: 2
21429533-1: RNCC: 5 | RNVC: 2

14 Jan 2004

5340-14-475-9079
Mounting Plate

144759079
201505021: RNCC: 3 | RNVC: 2
PAA15-05-021: RNCC: 5 | RNVC: 2

10 May 1995

5340-14-209-2829
Angle Bracket

142092829
3130S76-12-004: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-445-3461
Control Rod

144453461
43184824-001: RNCC: 3 | RNVC: 2

11 Feb 1991

5340-14-349-9154
Angle Bracket

143499154
6511-05242: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-309-6650
Support Hook

143096650
121E71-511-20-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-370-3447
Handle Grip

143703447
AA37-2-5M1: RNCC: 3 | RNVC: 2
AA37-2-5M1: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-508-7859
Lock Bolt

145087859
4918-1-004: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-14-467-4302
Mounting Bracket

144674302
160R742233-16: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-14-326-0198
Retaining Strap

143260198
NO PRIMARY REF14-326-0198: RNCC: 3 | RNVC: 2
4-86370: RNCC: 5 | RNVC: 9
486370: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-549-7707
Bow Handle

145497707
6040-15-JA: RNCC: 3 | RNVC: 2
750-193: RNCC: 5 | RNVC: 2

11 May 2006

5340-14-507-3373
Access Cover

145073373
855006-100: RNCC: 3 | RNVC: 2
855006-100: RNCC: 5 | RNVC: 2

29 Jun 1998

5340-14-493-0488
Butt Hinge

144930488
40-1-3683: RNCC: 3 | RNVC: 2
F300 0T 009 7360: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-377-6295
Angle Bracket

143776295
366A61-2054-21: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-540-4253
Runner

145404253
40-5-1072-10: RNCC: 3 | RNVC: 2
99208228: RNCC: 5 | RNVC: 2

25 Mar 2004

5340-14-396-3262
Rod End Clevis

143963262
5.105.090: RNCC: 3 | RNVC: 9
5-1050-90: RNCC: 5 | RNVC: 9
5105090: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-323-7363
Loop Clamp

143237363
50011-3-6: RNCC: 3 | RNVC: 2
0400465060: RNCC: 5 | RNVC: 2
NSA935807C06: RNCC: 5 | RNVC: 2
9562851000: RNCC: 5 | RNVC: 2
5001136: RNCC: 5 | RNVC: 2
50011-3-6: RNCC: 5 | RNVC: 9
P50011: RNCC: 5 | RNVC: 9
P50011-3-6: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-508-7807
Eye Hook

145087807
BS2843.21.00.004: RNCC: 3 | RNVC: 2
BS2843-21-00-004: RNCC: 5 | RNVC: 9

30 Sep 1998

5340-14-542-1219
Retaining Band

145421219
5302835-037-00-A: RNCC: 3 | RNVC: 2

7 Jul 2004

5340-14-463-9069
Loop Clamp

144639069
F0143-009F18TAB1DE33,7: RNCC: 3 | RNVC: 2
MAT169-0007F11: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-14-473-6788
Mounting Plate

144736788
332P61-6503-01: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-417-1607
Angle Bracket

144171607
366A21-1243-3002: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-14-524-2123
Retaining Strap

145242123
ST159-2M881P13: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-387-1457
Threaded Rod End

143871457
BN353-501REP1: RNCC: 3 | RNVC: 2
J05791-01-4110P001: RNCC: 3 | RNVC: 2
J00791-01-4100P001: RNCC: 5 | RNVC: 2

24 Aug 1983

5340-14-438-4806
Mounting Plate

144384806
332A61-1807-20: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-390-3109
Mounting Plate

143903109
461-11156-000: RNCC: 3 | RNVC: 2
85-692-0343: RNCC: 6 | RNVC: 9

26 Jan 1984

5340-14-391-7904
Runner

143917904
V2PM5013-118381: RNCC: 3 | RNVC: 2
V2PM5013-118381: RNCC: 5 | RNVC: 2

21 Mar 1984

5340-14-402-3933
Anchor Strap

144023933
785-385: RNCC: 3 | RNVC: 2

3 Jul 1985

5340-14-487-5553
Mounting Plate

144875553
78736TK050-19XA: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-379-1950
Bumper

143791950
EA1M235-13-823: RNCC: 3 | RNVC: 2
85-691-7595: RNCC: 6 | RNVC: 9

6 Sep 1982

5340-14-486-2569
Loop Clamp

144862569
360A13-1020-21: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-301-0156
Angle Bracket

143010156
121E71-270-09-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-424-6679
Swivel Caster

144246679
TP1BA040-73L: RNCC: 3 | RNVC: 2
91622790: RNCC: 5 | RNVC: 2

2 Jun 1988

5340-14-531-9314
Tee Hinge

145319314
2310-08364: RNCC: 3 | RNVC: 2

25 Sep 2002

5340-14-550-6591
Rod End Connector

145506591
Z330-006-000A: RNCC: 3 | RNVC: 2

6 Jul 2006

5340-14-475-7654
Runner

144757654
ACHXX000009: RNCC: 3 | RNVC: 9
T125-13: RNCC: 5 | RNVC: 2
2314/638: RNCC: 5 | RNVC: 9

3 May 1995

5340-14-417-8802
Rod End Clevis

144178802
PEC100-001-562: RNCC: 3 | RNVC: 2

31 Jul 1987

5340-14-420-1166
Plug Button

144201166
10016-085: RNCC: 3 | RNVC: 2

18 Nov 1987

5340-14-391-9055
Mounting Plate

143919055
5101-01-03-03: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-260-9938
Rod End Clevis

142609938
23310-01-3010P001: RNCC: 3 | RNVC: 2
233-79-06-01: RNCC: 5 | RNVC: 2
23310-01-3010P200: RNCC: 5 | RNVC: 2

21 Jun 1989

5340-14-489-9693
Mounting Plate

144899693
261660N: RNCC: 3 | RNVC: 2

3 Sep 1997

5340-14-325-9104
Key Blank

143259104
25511B4X6XC38: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-379-4770
Retaining Strap

143794770
19306073: RNCC: 3 | RNVC: 2

1 Oct 1982

5340-14-278-2857
Fusible Plug

142782857
322851: RNCC: 3 | RNVC: 9
EX322651: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-436-2038
Mounting Plate

144362038
DA2C228553001A1: RNCC: 3 | RNVC: 2

6 Dec 1989

5340-14-511-9877
Loop Clamp

145119877
7705005188: RNCC: 3 | RNVC: 2
0061452: RNCC: 3 | RNVC: 2

2 Feb 1999

5340-14-305-4843
Pipe Hanger

143054843
0264357430: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-031-1700
Anchor Strap

140311700
VDP4800: RNCC: 3 | RNVC: 2
VDPV4840: RNCC: 5 | RNVC: 2

14 Jun 1980

5340-14-489-8847
Mounting Bracket

144898847
BB4241: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-14-266-3337
Access Cover

142663337
ST406M31P74: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-545-4281
Clip Retainer Plate

145454281
RA1B216901031: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-554-8875
Loop Clamp

145548875
78651RH12: RNCC: 1 | RNVC: 2
78651RH12: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-506-8112
Access Cover

145068112
4363608: RNCC: 3 | RNVC: 2
4363608: RNCC: 5 | RNVC: 9

20 May 1998

5340-14-418-3361
Anchor Strap

144183361
5-454402-001: RNCC: 3 | RNVC: 9
2234080: RNCC: 5 | RNVC: 2
5-454402-001: RNCC: 5 | RNVC: 2
5-454402-001: RNCC: 5 | RNVC: 9

12 Aug 1987

5340-14-473-8652
Mounting Bracket

144738652
332V08-0060-21: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-482-2245
Mounting Bracket

144822245
51533-262-1: RNCC: 3 | RNVC: 2
51533-262-1: RNCC: 5 | RNVC: 9

27 Jun 1996

5340-14-463-9075
Loop Clamp

144639075
MAT169-0007F17: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-14-390-1749
Angle Bracket

143901749
NO PRIMARY REF14-390-1749: RNCC: 3 | RNVC: 2
86377: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-14-310-0712
Loop Clamp

143100712
A10-31-315-00-0: RNCC: 3 | RNVC: 2
A10-31-315-00-0: RNCC: 5 | RNVC: 2
A10-31-315-00-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-534-1066
Mounting Bracket

145341066
332A67-1838-63: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-531-4908
Mounting Bracket

145314908
858-002-671-0: RNCC: 3 | RNVC: 2

21 Aug 2002

5340-14-501-8183
Angle Bracket

145018183
307-839-801-0: RNCC: 3 | RNVC: 2

12 Nov 1997

5340-14-565-4721
Utility Resilient Mount

145654721
LSX-320 TYPE 2: RNCC: 3 | RNVC: 2

23 Aug 2010

5340-14-405-0174
Loop Clamp

144050174
51121919006: RNCC: 3 | RNVC: 2
24PE6: RNCC: 5 | RNVC: 2
25PE6: RNCC: 5 | RNVC: 2
85-693-1682: RNCC: 6 | RNVC: 9

20 Nov 1985

5340-14-325-4683
Loop Clamp

143254683
3-2607-25A: RNCC: 3 | RNVC: 2
3-2607-25: RNCC: 5 | RNVC: 9
3-2607-25A: RNCC: 5 | RNVC: 9
3-2757-25: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-387-8940
Loop Clamp

143878940
3-2602-100A: RNCC: 3 | RNVC: 2
3-2602-100A: RNCC: 5 | RNVC: 2

12 Oct 1983

5340-14-504-8388
Mounting Plate

145048388
95-142-0-031: RNCC: 3 | RNVC: 2

4 Mar 1998

5340-14-451-5377
Loop Clamp

144515377
45057833: RNCC: 3 | RNVC: 2
F117187: RNCC: 5 | RNVC: 2
45057833: RNCC: 5 | RNVC: 9

21 Nov 1991

5340-14-406-3028
Rod End Clevis

144063028
160-46827-02H: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-446-1349
Metal Grille

144461349
16009732: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-446-1254
Mounting Bracket

144461254
210537: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-428-6307
Block Clamp

144286307
LB12211556009: RNCC: 3 | RNVC: 2
12211556009: RNCC: 5 | RNVC: 2

8 Dec 1988

5340-14-553-5821
Access Cover

145535821
44038988: RNCC: 3 | RNVC: 2

19 Apr 2007

5340-14-336-7504
Webbing Strap

143367504
190601: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-375-2864
Rim Latch

143752864
NO PRIMARY REF14-375-2864: RNCC: 3 | RNVC: 2
1698754: RNCC: 5 | RNVC: 2
1698754: RNCC: 5 | RNVC: 9

26 Feb 1982

5340-14-533-8441
Mounting Plate

145338441
56096041: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-487-5313
Runner

144875313
RA1M287111412: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-323-2295
Angle Bracket

143232295
CRP10F4R15: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-473-9471
Mending Plate

144739471
39253114: RNCC: 3 | RNVC: 2
39253114: RNCC: 3 | RNVC: 9

18 Jan 1995

5340-14-323-4792
Angle Bracket

143234792
0265700010: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-317-9621
Support Hook

143179621
121B52-307-02-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-472-9589
Threaded Rod End

144729589
952R0020: RNCC: 3 | RNVC: 2

23 Nov 1994

5340-14-455-4905
Runner

144554905
EBGB016A: RNCC: 3 | RNVC: 2

21 May 1992

5340-14-392-3326
Angle Bracket

143923326
BED650-10-823: RNCC: 3 | RNVC: 2
85-692-3652: RNCC: 6 | RNVC: 9

21 Mar 1984

5340-14-524-2034
Mounting Bracket

145242034
ST159-2M781P87: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-372-6054
Butt Hinge

143726054
72-7-3351: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-555-0830
Mounting Bracket

145550830
329-29-110: RNCC: 3 | RNVC: 2

27 Sep 2007

5340-14-438-0528
Mounting Plate

144380528
M3X702-317: RNCC: 3 | RNVC: 2
5340AA1097809: RNCC: 6 | RNVC: 9

7 Mar 1990

5340-14-511-6466
Mounting Bracket

145116466
1-625-09-01: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-501-3260
Mounting Bracket

145013260
704-130004-001-0: RNCC: 3 | RNVC: 2

29 Oct 1997

5340-14-488-3374
Bumper

144883374
4E4-10005-000: RNCC: 3 | RNVC: 2
4E4-10005-000: RNCC: 5 | RNVC: 9

30 Apr 1997

5340-14-278-3637
Arched Cushion

142783637
160-79531-07: RNCC: 3 | RNVC: 2
15160-79531-07: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-577-1941
Utility Resilient Mount

145771941
EC 2010/D M6X18: RNCC: 3 | RNVC: 2
A09906086: RNCC: 5 | RNVC: 2
Y00014479: RNCC: 5 | RNVC: 2

21 Aug 2013

5340-14-536-3848
Loop Clamp

145363848
NSA5536-12: RNCC: 1 | RNVC: 2
HP12N: RNCC: 3 | RNVC: 2
NSA5536-12: RNCC: 5 | RNVC: 2

29 Jul 2003

5340-14-370-1928
Protection Bellows

143701928
366A57-4009-24: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-279-6433
Screw Hook

142796433
NO PRIMARY REF14-279-6433: RNCC: 3 | RNVC: 2
33-1073: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-516-3975
Mounting Bracket

145163975
5721-498-0100/25: RNCC: 3 | RNVC: 9

22 Sep 1999

5340-14-317-9216
Angle Bracket

143179216
341A24-1042-20: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-266-0854
Shelf Bracket

142660854
915-350X400MM: RNCC: 3 | RNVC: 9
40576D15: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-506-7130
Angle Bracket

145067130
TB30-48090-106: RNCC: 3 | RNVC: 2

11 May 1998

5340-14-448-1841
Loop Clamp

144481841
SP417,2PPRDPAS: RNCC: 3 | RNVC: 2
RI SP417-2PPDPAS: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-397-7208
Webbing Strap

143977208
NO PRIMARY REF14-397-7208: RNCC: 3 | RNVC: 2
11355L10M: RNCC: 5 | RNVC: 9

14 Dec 1984

5340-14-489-1481
Metal Grille

144891481
447431: RNCC: 3 | RNVC: 2
447431-001: RNCC: 5 | RNVC: 9

27 Jun 1997

5340-14-351-1493
Bumper

143511493
AZ437-86B: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-540-3884
Retaining Clip

145403884
52691: RNCC: 3 | RNVC: 2
5340-GT-0000089: RNCC: 5 | RNVC: 9

20 Mar 2004

5340-14-370-2425
Pipe Hanger

143702425
303-995-801-0: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-378-6854
Rod End Connector

143786854
EA1M145-11-01: RNCC: 3 | RNVC: 2
85-691-8398: RNCC: 6 | RNVC: 9

11 Aug 1982

5340-14-385-2013
Mending Plate

143852013
5097-01: RNCC: 3 | RNVC: 2
7855025000: RNCC: 5 | RNVC: 2

26 Jul 1983

5340-14-451-4547
Anchor Strap

144514547
851-490-143-0: RNCC: 3 | RNVC: 2

21 Nov 1991

5340-14-297-5462
Access Cover

142975462
NO PRIMARY REF14-297-5462: RNCC: 3 | RNVC: 2
21-53-32-26: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-256-4330
Pipe Hanger

142564330
C0LLIERAVIS60-6-35CHR0MATE: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-286-5185
Rod End Clevis

142865185
502-513-029-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-267-4080
Rod End Connector

142674080
262-10-34115-81: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-546-8591
Aircraft Latch Hook

145468591
S711A1011154: RNCC: 1 | RNVC: 2
TL100053-110: RNCC: 3 | RNVC: 2

30 Aug 2005

5340-14-349-8529
Rod End Clevis

143498529
M208-47012: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-336-8356
Swivel Caster

143368356
TL3BR80-33L: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-447-8018
Loop Clamp

144478018
212-7PPIS: RNCC: 3 | RNVC: 2
2127PPIS: RNCC: 5 | RNVC: 2

6 Jun 1991

5340-14-393-6064
Bumper

143936064
NO PRIMARY REF14-393-6064: RNCC: 3 | RNVC: 2
0329-411-202-12: RNCC: 5 | RNVC: 9

7 Jun 1984

5340-14-349-7551
Access Cover

143497551
053M58-573726C: RNCC: 3 | RNVC: 2
0573726C00: RNCC: 5 | RNVC: 2

14 Jun 1978

5340-14-465-9993
Access Cover

144659993
613-539-103-0: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-14-351-4312
Angle Bracket

143514312
73-013-012: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-261-7026
Handwheel

142617026
00781010141: RNCC: 3 | RNVC: 2
00781-01-014-1: RNCC: 5 | RNVC: 2
11HL3: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-535-6218
Synchro Clamp

145356218
HD-111-1132-B: RNCC: 3 | RNVC: 2
HD-111-1132-B: RNCC: 3 | RNVC: 9
8035996D01: RNCC: 5 | RNVC: 2

11 Jun 2003

5340-14-437-7342
Mounting Bracket

144377342
160G882293-12: RNCC: 3 | RNVC: 2

14 Feb 1990

5340-14-534-1349
Angle Bracket

145341349
332P87-0027-29: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-490-0990
Runner

144900990
RT4D-0552: RNCC: 3 | RNVC: 2

10 Sep 1997

5340-14-365-7510
Retaining Band

143657510
3163-56B: RNCC: 3 | RNVC: 9
5-63-1036: RNCC: 5 | RNVC: 9

8 Oct 1980

5340-14-375-6483
Furniture Leg Tip

143756483
5240-64: RNCC: 3 | RNVC: 2
21933-2487: RNCC: 5 | RNVC: 2
85-692-0142: RNCC: 6 | RNVC: 9

26 Feb 1982

5340-14-342-5596
Retaining Strap

143425596
300-600-203-0: RNCC: 3 | RNVC: 2
000508030A: RNCC: 5 | RNVC: 2
300-600-203P: RNCC: 5 | RNVC: 2

16 May 1977

5340-14-420-0359
Webbing Strap

144200359
4-012-0053: RNCC: 3 | RNVC: 2

18 Nov 1987

5340-14-401-1202
Access Cover

144011202
6814-26302: RNCC: 3 | RNVC: 2

29 May 1985

5340-14-323-6642
Retaining Strap

143236642
121S63-205-16-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-517-8014
Lock-Release Lever

145178014
21242491-00: RNCC: 3 | RNVC: 2
21241291-3: RNCC: 5 | RNVC: 2

13 Jan 2000

5340-14-385-2224
Expansion Shield

143852224
242-01-0392-02: RNCC: 3 | RNVC: 2
7703081015: RNCC: 5 | RNVC: 2

26 Jul 1983

5340-14-348-8793
Access Cover

143488793
300-563-302-0: RNCC: 3 | RNVC: 2
300-563-303-0: RNCC: 3 | RNVC: 2
300-563-304-0: RNCC: 3 | RNVC: 2
000139020A: RNCC: 5 | RNVC: 2
300-563-302P: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-510-2362
Access Cover

145102362
FA2C232-32-810RS2: RNCC: 3 | RNVC: 2
1560AA8017073: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-458-7673
Cushioning Pad

144587673
MN02/09-54: RNCC: 3 | RNVC: 2
MN04/09-54: RNCC: 5 | RNVC: 2

3 Nov 1992

5340-14-302-5615
Loop Clamp

143025615
330A76-3226-20: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-408-5426
Anchor Strap

144085426
1909-21-11: RNCC: 3 | RNVC: 9

2 Apr 1986

5340-14-437-4667
Mounting Plate

144374667
332A91-3004-22: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-287-8891
Handwheel

142878891
R161-05V0LANTM12: RNCC: 2 | RNVC: 2
3648: RNCC: 3 | RNVC: 2
M12UE10Z: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-519-5803
Mounting Plate

145195803
4291-7-01: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-308-5250
Plug Button

143085250
NO PRIMARY REF14-308-5250: RNCC: 3 | RNVC: 2
359170REPU16: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-303-4989
Mending Plate

143034989
NO PRIMARY REF14-303-4989: RNCC: 3 | RNVC: 2
48-23-10-233: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-552-2342
Mounting Bracket

145522342
SZ18.705.511: RNCC: 3 | RNVC: 2

5 Dec 2006

5340-14-390-2394
Anchor Strap

143902394
NO PRIMARY REF14-390-2394: RNCC: 3 | RNVC: 2
D10-23799: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-14-447-2251
Butt Hinge

144472251
LLP101-100-100: RNCC: 3 | RNVC: 2

13 May 1991

5340-14-509-1023
Angle Bracket

145091023
JVJT161010: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-508-7742
Access Cover

145087742
BS2842.125.00.000: RNCC: 3 | RNVC: 2
BS2842-125-00-000: RNCC: 5 | RNVC: 9

30 Sep 1998

5340-14-395-2710
Turnbuckle Body

143952710
C3387-011F6: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-486-0426
Detent Plunger

144860426
429565: RNCC: 3 | RNVC: 2
429565-001: RNCC: 5 | RNVC: 9

26 Feb 1997

5340-14-490-3014
Mounting Bracket

144903014
J05085-04-0100P041: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-466-2412
Retaining Strap

144662412
RS2.44/20: RNCC: 3 | RNVC: 2
RS1200.44/20: RNCC: 5 | RNVC: 2
RS2.44/20W1: RNCC: 5 | RNVC: 2
RS2.44/20: RNCC: 5 | RNVC: 2
RS2.44/20: RNCC: 5 | RNVC: 2
RS2.44/20W1: RNCC: 5 | RNVC: 2
RS1200.44/20: RNCC: 5 | RNVC: 2

3 Nov 1993

5340-14-257-1114
Control Rod

142571114
330A77-3243-2051: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-473-3093
Clamping Catch

144733093
707104: RNCC: 3 | RNVC: 2
707104: RNCC: 5 | RNVC: 9

13 Dec 1994

5340-14-340-2663
Access Cover

143402663
NO PRIMARY REF14-340-2663: RNCC: 3 | RNVC: 2
D30-24472: RNCC: 5 | RNVC: 9

14 Feb 1977

5340-14-462-9489
Access Cover

144629489
MAT462-0077: RNCC: 3 | RNVC: 2

11 May 1993

5340-14-233-1830
Mounting Plate

142331830
6547-02: RNCC: 3 | RNVC: 9
543381: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-257-2209
Bumper

142572209
330A22-2113-2051: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-429-3840
Mounting Bracket

144293840
NO PRIMARY REF14-429-3840: RNCC: 3 | RNVC: 2
2-8D4-2-92: RNCC: 5 | RNVC: 9

20 Jan 1989

5340-14-317-2417
Loop Clamp

143172417
NO PRIMARY REF14-317-2417: RNCC: 3 | RNVC: 2
9560115600: RNCC: 5 | RNVC: 2
620-847-246-0: RNCC: 5 | RNVC: 2
930509: RNCC: 5 | RNVC: 2
C168IS0CLIP: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-319-0679
Bail Handle

143190679
PR.303-IP: RNCC: 3 | RNVC: 2
PR303IP: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-550-2385
Clamp Bolt Assembly

145502385
S3SD18135-3: RNCC: 3 | RNVC: 2
S3SD18135-03: RNCC: 5 | RNVC: 9

13 Jun 2006

5340-14-440-4407
Quick Release Pin

144404407
51453C12R22D: RNCC: 3 | RNVC: 2
51453C12R22D: RNCC: 5 | RNVC: 2
51453C12R22D: RNCC: 5 | RNVC: 9
85-693-6704: RNCC: 6 | RNVC: 9

11 Jul 1990

5340-14-540-2481
Mounting Plate

145402481
262-2-0-13: RNCC: 3 | RNVC: 2

16 Mar 2004

5340-14-372-7901
Retaining Strap

143727901
650-403-045-0: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-367-6029
Mounting Plate

143676029
NO PRIMARY REF14-367-6029: RNCC: 3 | RNVC: 2
D20-21139: RNCC: 5 | RNVC: 9

19 Jan 1981

5340-14-544-8116
Swivel Caster

145448116
HP7LC250-78B: RNCC: 3 | RNVC: 2
8051825F00: RNCC: 5 | RNVC: 2

24 Feb 2005

5340-14-473-3291
Block Clamp

144733291
95000-408: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-547-6490
Bumper

145476490
8733-61: RNCC: 3 | RNVC: 2
9633593380: RNCC: 5 | RNVC: 2

21 Oct 2005

5340-14-304-3440
Angle Bracket

143043440
330A21-2720-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-261-2838
Rod End Connector

142612838
175-74-37: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-457-2621
Mounting Plate

144572621
402248B-SG10137-Z2CND17-12: RNCC: 3 | RNVC: 2

20 Aug 1992

5340-14-539-6470
Retaining Strap

145396470
21226911-00: RNCC: 3 | RNVC: 2
21226911-4: RNCC: 5 | RNVC: 2

28 Jan 2004

5340-14-477-7069
Mounting Bracket

144777069
54630-290-1: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-14-524-3891
Cover Strip

145243891
365A25-0028-1501: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-468-4910
Mounting Bracket

144684910
2089-10187: RNCC: 3 | RNVC: 2

3 Mar 1994

5340-14-224-8865
Rigid Caster

142248865
536-424-006DET2: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-470-0002
Loop Clamp

144700002
DIA60-80: RNCC: 3 | RNVC: 2

25 May 1994

5340-14-448-8573
Buckle

144488573
34211-021-160: RNCC: 3 | RNVC: 2
34211-021: RNCC: 5 | RNVC: 2

23 Jul 1991

5340-14-374-0286
Clamping Catch

143740286
700300001110: RNCC: 3 | RNVC: 2
D1512-802SP: RNCC: 5 | RNVC: 2

8 Dec 1981

5340-14-388-1739
Loop Clamp

143881739
RSGU1-17-20: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-534-4624
Butt Hinge

145344624
70-1-3303-07-306: RNCC: 3 | RNVC: 2
SC020745: RNCC: 6 | RNVC: 9

26 Mar 2003

5340-14-542-3016
Mounting Plate

145423016
962693908: RNCC: 3 | RNVC: 2
962693908: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-438-7728
Mounting Bracket

144387728
330A93-2033-21: RNCC: 3 | RNVC: 2

4 Apr 1990

5340-14-503-9884
Stovepipe Shield

145039884
TOLE93742C00: RNCC: 3 | RNVC: 2
TOLE093742A00: RNCC: 5 | RNVC: 9

4 Feb 1998

5340-14-297-1353
Pipe Hanger

142971353
MY20515-009: RNCC: 3 | RNVC: 2
MY20-515-009: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-483-9479
Mounting Bracket

144839479
321A75-1033-00: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-14-202-5252
Loop Clamp

142025252
574-209-130-0: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-532-3200
Access Cover

145323200
192E567-00: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-479-2251
Access Cover

144792251
27-56506-472-01: RNCC: 3 | RNVC: 2

19 Dec 1995

5340-14-526-8660
Strap Fastener Loop

145268660
21224401-00: RNCC: 3 | RNVC: 2
21224401-3: RNCC: 5 | RNVC: 2

12 Sep 2001

5340-14-427-4116
Doorstop

144274116
MY20240-030: RNCC: 3 | RNVC: 2

18 Oct 1988

5340-14-475-9080
Mounting Bracket

144759080
201506005: RNCC: 3 | RNVC: 2
PAA15-06-005: RNCC: 5 | RNVC: 2

10 May 1995

5340-14-285-0705
Rod End Connector

142850705
A10-22-722-02-0: RNCC: 3 | RNVC: 2
A10-22-722-02-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-437-9575
Locking Stay

144379575
330A87-1194-01: RNCC: 3 | RNVC: 2

28 Feb 1990

5340-14-444-5323
Plug Button

144445323
MB700-080: RNCC: 3 | RNVC: 2
MB700080: RNCC: 5 | RNVC: 2

15 Jan 1991

5340-14-482-5315
Mounting Bracket

144825315
4422-037: RNCC: 3 | RNVC: 2

11 Jul 1996

5340-14-234-5819
Bumper

142345819
321A23-0174-00: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-444-9303
Mounting Bracket

144449303
568733: RNCC: 3 | RNVC: 2

29 Jan 1991

5340-14-312-8309
Mounting Bracket

143128309
0249857370: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-250-6967
Loop Clamp

142506967
200800: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-256-7584
Angle Bracket

142567584
251440701: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-554-3272
Mounting Plate

145543272
82374007000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-411-6762
Bow Handle

144116762
406132: RNCC: 3 | RNVC: 2

27 Aug 1986

5340-14-469-2829
Bow Handle

144692829
640.30.26: RNCC: 3 | RNVC: 2
1087844Y00: RNCC: 5 | RNVC: 2

18 Apr 1994

5340-14-547-7707
Retaining Bail

145477707
08.44906: RNCC: 3 | RNVC: 2

10 Nov 2005

5340-14-525-8379
Mounting Plate

145258379
G125031: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-446-8923
Mounting Bracket

144468923
5010002320: RNCC: 3 | RNVC: 2

17 Apr 1991

5340-14-465-9679
Doorknob

144659679
3511 318 56281: RNCC: 3 | RNVC: 2
3511-318-56281: RNCC: 5 | RNVC: 2

26 Oct 1993

5340-14-366-9320
Mending Plate

143669320
003081080P: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-410-6860
Retaining Strap

144106860
246681: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-538-2230
Loop Clamp

145382230
NGM0010033010903: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-031-8831
Angle Bracket

140318831
573905059: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-555-4270
Mounting Plate

145554270
S432A1003101: RNCC: 3 | RNVC: 2

9 Nov 2007

5340-14-454-7483
Control Rod

144547483
MAT523-0057F5: RNCC: 3 | RNVC: 2

9 Apr 1992

5340-14-473-9645
Mounting Plate

144739645
F7987 5341-89: RNCC: 3 | RNVC: 9

18 Jan 1995

5340-14-501-0630
Mounting Plate

145010630
4372-0023: RNCC: 3 | RNVC: 2
F300 0T 025 0962: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-310-2488
Lock-Release Lever

143102488
NO PRIMARY REF14-310-2488: RNCC: 3 | RNVC: 2
23846DETG: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-550-4385
Mounting Bracket

145504385
365A53-1463-20: RNCC: 3 | RNVC: 2

20 Jun 2006

5340-14-408-5270
Runner

144085270
NO PRIMARY REF14-408-5270: RNCC: 3 | RNVC: 2
D30-28881: RNCC: 5 | RNVC: 9

2 Apr 1986

5340-14-533-6010
Mounting Bracket

145336010
708010S170-00A: RNCC: 3 | RNVC: 2

12 Feb 2003

5340-14-484-8575
Access Cover

144848575
366A25-0023-12: RNCC: 3 | RNVC: 2

12 Dec 1996

5340-14-420-6714
Loop Clamp

144206714
237039606: RNCC: 3 | RNVC: 2
A24812-0000: RNCC: 3 | RNVC: 9
A24812: RNCC: 5 | RNVC: 9
A24812-0000: RNCC: 5 | RNVC: 9

16 Dec 1987

5340-14-465-6455
Loop Clamp

144656455
NSA5516-02NV: RNCC: 3 | RNVC: 2
NSA5516-02NV: RNCC: 5 | RNVC: 2

6 Oct 1993

5340-14-303-5067
Anchor Strap

143035067
NO PRIMARY REF14-303-5067: RNCC: 3 | RNVC: 2
48-26-30-047: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-353-1985
Loop Clamp

143531985
078060250: RNCC: 3 | RNVC: 2
26140369W: RNCC: 5 | RNVC: 2
ZC9614036U: RNCC: 5 | RNVC: 2
91355364: RNCC: 5 | RNVC: 2
H0P12-3C: RNCC: 5 | RNVC: 2

8 Dec 1978

5340-14-377-9379
Control Rod

143779379
710035-21061: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-340-3392
Pipe Hanger

143403392
M3C705-15-01: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-312-0542
Angle Bracket

143120542
23008306: RNCC: 3 | RNVC: 2
23008306-5: RNCC: 5 | RNVC: 2
23C2F31: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-441-2150
Mounting Plate

144412150
332A93-3426-20: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-531-2129
Mounting Bracket

145312129
341A54-1083-00: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-206-2530
Rod End Clevis

142062530
17-5-1417: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-539-9857
Mounting Bracket

145399857
RN271/77713: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-541-5123
Angle Bracket

145415123
1091323-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-526-8022
Mounting Bracket

145268022
504323-2: RNCC: 3 | RNVC: 2

6 Sep 2001

5340-14-490-3103
Mounting Bracket

144903103
J05085-04-0400P031: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-297-5761
Retaining Strap

142975761
79244-169: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-412-3538
Bumper

144123538
453-80560-000: RNCC: 3 | RNVC: 2
M397-02-10-40-38: RNCC: 5 | RNVC: 2

8 Oct 1986

5340-14-456-6826
Bow Handle

144566826
90-320-A1008-REP16: RNCC: 3 | RNVC: 2
1061772S00: RNCC: 5 | RNVC: 2

22 Jul 1992

5340-14-230-1960
Retaining Band

142301960
DEN279-15: RNCC: 3 | RNVC: 2
2200018: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-370-8694
Pipe Hanger

143708694
303-933-205-0: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-401-3673
Access Cover

144013673
NO PRIMARY REF14-401-3673: RNCC: 3 | RNVC: 2
29762452: RNCC: 5 | RNVC: 9

5 Jun 1985

5340-14-331-7923
Retaining Strap

143317923
574-314-180-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-042-0037
Access Cover

140420037
31-52-41482-2: RNCC: 3 | RNVC: 2
9520010499: RNCC: 5 | RNVC: 2

7 Oct 1976

5340-14-448-1688
Support Hook

144481688
A10-21-144-64-0: RNCC: 3 | RNVC: 2
A10-21-144-64-0: RNCC: 5 | RNVC: 2
85-693-8165: RNCC: 6 | RNVC: 9

12 Jun 1991

5340-14-455-4228
Loop Clamp

144554228
E-1248/2: RNCC: 3 | RNVC: 2
91628647: RNCC: 5 | RNVC: 2
E1248-2: RNCC: 5 | RNVC: 2

21 May 1992

5340-14-250-8148
Buckle

142508148
34201-160-031: RNCC: 3 | RNVC: 2
SAC63-82: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-350-5175
Bumper

143505175
NO PRIMARY REF14-350-5175: RNCC: 3 | RNVC: 2
745016: RNCC: 5 | RNVC: 9

12 Jul 1978

5340-14-041-2742
Access Cover

140412742
J00547-00-2100P004: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-519-5748
Access Cover

145195748
8098-002-165: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-411-6527
Swivel Caster

144116527
VK17-65/30/40/212EP16-80: RNCC: 3 | RNVC: 2
VULK0LSZ65X30X212X80: RNCC: 5 | RNVC: 2

27 Aug 1986

5340-14-391-7838
Retaining Strap

143917838
V2PT5013-120164: RNCC: 3 | RNVC: 2
V2PT5013-120164: RNCC: 5 | RNVC: 2

21 Mar 1984

5340-14-367-2245
Loop Clamp

143672245
A10-14-435-09-0: RNCC: 3 | RNVC: 2
A10-14-435-09-0: RNCC: 5 | RNVC: 2
A10-14-435-09-0: RNCC: 5 | RNVC: 2
85-800-7356: RNCC: 6 | RNVC: 9

11 Dec 1980

5340-14-432-6125
Compression Cup

144326125
T110-11-88NBR/101: RNCC: 3 | RNVC: 2
FRUT110-11-88NBR/101: RNCC: 5 | RNVC: 9

14 Jun 1989

5340-14-446-8727
Mounting Bracket

144468727
815-1-97-214: RNCC: 3 | RNVC: 2

17 Apr 1991

5340-14-541-5014
Buckle

145415014
01155-2-V0-01212LG2M2PC0M4: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-293-8925
Bumper

142938925
EQDIV43-09-3: RNCC: 3 | RNVC: 2
EQDIV43-09REP3: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-387-5878
Mortise Lock Set

143875878
NO PRIMARY REF14-387-5878: RNCC: 3 | RNVC: 2
B0SCHD0UBLE: RNCC: 5 | RNVC: 9

15 Sep 1983

5340-14-321-8338
Rod End Connector

143218338
A10-67-607-14-0: RNCC: 3 | RNVC: 2
A10-67-607-14-0: RNCC: 5 | RNVC: 2
85-800-4582: RNCC: 6 | RNVC: 9

1 Jan 1975

5340-14-497-7701
Pipe Hanger

144977701
307-995-206-0: RNCC: 3 | RNVC: 2

15 Oct 1997

5340-14-518-2112
Pipe Hanger

145182112
307-879-305-0: RNCC: 3 | RNVC: 2
307-879-303-0: RNCC: 5 | RNVC: 2

26 Jan 2000

5340-14-428-3749
Loop Clamp

144283749
3-2607-100A: RNCC: 3 | RNVC: 2
3-2607-100A: RNCC: 5 | RNVC: 9

8 Dec 1988

5340-14-481-3662
Mounting Bracket

144813662
10039173: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-328-8996
Butt Hinge

143288996
40BC70X50CADMIE: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-445-1011
Rim Lock

144451011
3203: RNCC: 3 | RNVC: 2
3203: RNCC: 5 | RNVC: 2

31 Jan 1991

5340-14-449-2347
Cable Retractor

144492347
50755: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-266-2172
Loop Clamp

142662172
4095NA: RNCC: 3 | RNVC: 2
451907: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-031-8798
Webbing Strap

140318798
003209210M: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-561-7451
Utility Resilient Mount

145617451
531701-60: RNCC: 3 | RNVC: 2

1 Sep 2009

5340-14-467-2695
Arched Cushion

144672695
BFC20841: RNCC: 3 | RNVC: 2
89172028: RNCC: 5 | RNVC: 2

21 Dec 1993

5340-14-382-9579
Retaining Strap

143829579
BAZ7982: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-554-1750
Mounting Bracket

145541750
82086615000: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-388-7975
Bumper

143887975
418100225: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-415-4627
Retaining Strap

144154627
545021: RNCC: 3 | RNVC: 2

18 May 1987

5340-14-468-3272
Detent Plunger

144683272
1049626M01: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-14-448-4760
Mounting Bracket

144484760
5000987228: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-14-509-0178
Lock Key

145090178
CLEF MINI-DISQUE: RNCC: 3 | RNVC: 2

14 Oct 1998

5340-14-554-9129
Mounting Bracket

145549129
82117065000: RNCC: 3 | RNVC: 2

7 Sep 2007

5340-14-219-2141
Bow Handle

142192141
15CB11: RNCC: 3 | RNVC: 9
15CB11: RNCC: 5 | RNVC: 9
15CB11: RNCC: 5 | RNVC: 9
4011: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-375-3738
Angle Bracket

143753738
045U11-693743T: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-549-9622
Webbing Strap

145499622
ME17281: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-553-1568
Mounting Bracket

145531568
252651274-00: RNCC: 3 | RNVC: 2

7 Mar 2007

5340-14-481-0958
Pipe Hanger

144810958
78733-016-025: RNCC: 3 | RNVC: 2

18 Apr 1996

5340-14-314-4239
Doorknob

143144239
Z00520-25: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-530-6069
Mounting Plate

145306069
888-380-402-0: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-14-300-8489
Access Cover

143008489
3P2CUHVZ10-2062: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-272-5966
Pipe Hanger

142725966
160-11521-13: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-548-4167
Access Hole Frame

145484167
21237891-00: RNCC: 3 | RNVC: 2
212378918: RNCC: 5 | RNVC: 2

13 Jan 2006

5340-14-484-8220
Mounting Bracket

144848220
332P68-1405-00: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-471-1207
Mounting Bracket

144711207
CC890036-3-14: RNCC: 3 | RNVC: 2
45057363: RNCC: 5 | RNVC: 2
45057363: RNCC: 5 | RNVC: 2

27 Jul 1994

5340-14-505-5089
Access Cover

145055089
307-193-801-0: RNCC: 3 | RNVC: 2
3071938010: RNCC: 5 | RNVC: 2

18 Mar 1998

5340-14-549-6643
Retaining Strap

145496643
MC201-215322-00: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-14-412-2186
Bumper

144122186
332A25-1054-20: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-379-3994
Mounting Plate

143793994
102173402: RNCC: 3 | RNVC: 2
0139-48: RNCC: 5 | RNVC: 2
102173402: RNCC: 5 | RNVC: 2

1 Oct 1982

5340-14-420-7223
Bow Handle

144207223
6261-01107: RNCC: 3 | RNVC: 2

16 Dec 1987

5340-14-436-3252
Angle Bracket

144363252
4169875: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-14-552-8955
Mounting Bracket

145528955
S261A1013106: RNCC: 3 | RNVC: 2

12 Feb 2007

5340-14-441-9460
Runner

144419460
8065-30-4: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-379-4373
Retaining Strap

143794373
2206-321B473: RNCC: 3 | RNVC: 2

1 Oct 1982

5340-14-398-9413
Retaining Band

143989413
M334-01-87-21: RNCC: 3 | RNVC: 2
453-65035-000: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-449-1065
Angle Bracket

144491065
81011-26: RNCC: 3 | RNVC: 2

29 Jul 1991

5340-14-462-9154
Angle Bracket

144629154
2085-02-062: RNCC: 3 | RNVC: 2
89482663: RNCC: 5 | RNVC: 2

5 May 1993

5340-14-370-7319
Detent Plunger

143707319
663-45634-00: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-441-2023
Shelf Bracket

144412023
332A55-1050-57: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-284-9340
Bow Handle

142849340
156523: RNCC: 3 | RNVC: 2
156523: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-401-3048
Mounting Plate

144013048
BA13682: RNCC: 3 | RNVC: 2
229863: RNCC: 5 | RNVC: 2

5 Jun 1985

5340-14-452-3663
Block Clamp

144523663
11211556054: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-465-2639
Mounting Plate

144652639
1.13.57.0251-OBTURATEUR3/8": RNCC: 3 | RNVC: 9
RAB1844: RNCC: 5 | RNVC: 2

22 Sep 1993

5340-14-305-9824
Loop Clamp

143059824
9133090000: RNCC: 3 | RNVC: 2
9-133090-000: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-296-2974
Rod End Connector

142962974
A1-64591EB: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-429-1058
Angle Bracket

144291058
A10-11-355-07-2: RNCC: 3 | RNVC: 2
A10-11-355-07-2: RNCC: 5 | RNVC: 2
85-693-7019: RNCC: 6 | RNVC: 9

11 Jan 1989

5340-14-537-3486
Retaining Band

145373486
MAT169-0029F17/F18D88,9: RNCC: 3 | RNVC: 2

21 Oct 2003

5340-14-441-3387
Angle Bracket

144413387
78702-060: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-470-0496
Bumper

144700496
A02647-01-0000P011: RNCC: 3 | RNVC: 2

25 May 1994

5340-14-525-1583
Mounting Bracket

145251583
312-07067-001: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-454-6667
Access Cover

144546667
29-1012: RNCC: 3 | RNVC: 2

9 Apr 1992

5340-14-309-8859
Loop Clamp

143098859
7409: RNCC: 3 | RNVC: 2
99-102-9647: RNCC: 6 | RNVC: 9

1 Jan 1974

5340-14-321-4172
Bow Handle

143214172
311MA0024REP3: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-412-5262
Loop Clamp

144125262
620817: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-14-397-3621
Angle Bracket

143973621
402016: RNCC: 3 | RNVC: 2
91379465: RNCC: 5 | RNVC: 2
91379465: RNCC: 5 | RNVC: 2

7 Dec 1984

5340-14-407-8316
Access Cover

144078316
121-511-10-88-02: RNCC: 3 | RNVC: 2
121-511-10-88-02 PC30: RNCC: 5 | RNVC: 2
85-693-1113: RNCC: 6 | RNVC: 9

5 Mar 1986

5340-14-551-2589
Pipe Hanger

145512589
RA1M701916361A1: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-406-2213
Mending Plate

144062213
20810117-4: RNCC: 3 | RNVC: 2
810117: RNCC: 5 | RNVC: 2
20810117-6: RNCC: 5 | RNVC: 2

8 Jan 1986

5340-14-549-6318
Metal Grille

145496318
CR 495222: RNCC: 3 | RNVC: 2
495222: RNCC: 5 | RNVC: 2
PLN495000 IND.E 13/08/01 REP9: RNCC: 5 | RNVC: 2
X.495222: RNCC: 5 | RNVC: 2

24 Apr 2006

5340-14-329-4290
Retaining Band

143294290
NO PRIMARY REF14-329-4290: RNCC: 3 | RNVC: 2
106578: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-531-5555
Butt Hinge

145315555
1056-014: RNCC: 3 | RNVC: 2

28 Aug 2002

5340-14-374-5028
Retaining Strap

143745028
341A86-1025-20: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-314-9052
Snap Hook

143149052
351151-0: RNCC: 3 | RNVC: 2
EFA2057: RNCC: 3 | RNVC: 9
2057: RNCC: 3 | RNVC: 9
210574: RNCC: 3 | RNVC: 9
2057: RNCC: 5 | RNVC: 9
210574: RNCC: 5 | RNVC: 9
85-670-8110: RNCC: 6 | RNVC: 9

1 Jan 1974

5340-14-296-3499
Mending Plate

142963499
CAP10-10-17-08: RNCC: 3 | RNVC: 9

1 Jan 1973

5340-14-473-6566
Mounting Bracket

144736566
332A61-3010-00: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-413-1521
Angle Bracket

144131521
23116020-4: RNCC: 3 | RNVC: 2
23116020: RNCC: 5 | RNVC: 2

26 Nov 1986

5340-14-503-2869
Mounting Bracket

145032869
332P69-1415-05: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-384-0607
Tubular Fairlead

143840607
121-510-10-04-07: RNCC: 3 | RNVC: 2
85-692-0527: RNCC: 6 | RNVC: 9

4 May 1983

5340-14-552-7362
Aircraft Latch Hook

145527362
CLB501-001-560: RNCC: 3 | RNVC: 2

26 Jan 2007

5340-14-478-7363
Mounting Plate

144787363
4125-0700: RNCC: 3 | RNVC: 2
544305: RNCC: 5 | RNVC: 2

20 Nov 1995

5340-14-205-6785
Mending Plate

142056785
2228-36-22-00-11A: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-420-7166
Support Hook

144207166
6511-27012: RNCC: 3 | RNVC: 2

16 Dec 1987

5340-14-486-6122
Butt Hinge

144866122
A10-12-925-12-2: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-14-467-3693
Clamping Catch

144673693
0236788N00: RNCC: 3 | RNVC: 2
V951L02-1-5BP: RNCC: 5 | RNVC: 2

10 Jan 1994

5340-14-203-7172
Rod End Clevis

142037172
17-1-1430: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-379-9008
Mending Plate

143799008
21325441: RNCC: 3 | RNVC: 2
21325441-4: RNCC: 5 | RNVC: 2

20 Oct 1982

5340-14-445-3115
Butt Hinge

144453115
05910100-7: RNCC: 3 | RNVC: 2
059101007: RNCC: 5 | RNVC: 2

11 Feb 1991

5340-14-554-0366
Loop Clamp

145540366
ASNA0021-11N40: RNCC: 3 | RNVC: 2
ASNA0021-11N40: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-14-324-8742
Bow Handle

143248742
330A87-1362-01: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-495-3907
Loop Clamp

144953907
P3036950H: RNCC: 3 | RNVC: 9
H30369-50: RNCC: 5 | RNVC: 9
F300 0T 019 1839: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-369-2014
Loop Clamp

143692014
E91500-002: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-527-3353
Access Cover

145273353
21240955-00: RNCC: 3 | RNVC: 2
21240955-7: RNCC: 5 | RNVC: 2

24 Oct 2001

5340-14-289-8741
Butt Hinge

142898741
R4A293-93-835: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-463-6447
Runner

144636447
MAT292-0097F2: RNCC: 3 | RNVC: 2

23 Jun 1993

5340-14-542-5109
Pawl Fastener

145425109
4M-31003: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-14-515-0561
Angle Bracket

145150561
307-839-803-0: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-14-517-5821
Angle Bracket

145175821
RA1M701205160N1: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-354-0572
Angle Bracket

143540572
A11A224201032: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-547-9641
Retaining Strap

145479641
RA1B701246041: RNCC: 3 | RNVC: 2

30 Nov 2005

5340-14-533-6636
Mounting Bracket

145336636
F1264407: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-14-391-7862
Angle Bracket

143917862
V2PT3243-120050: RNCC: 3 | RNVC: 2
V2PT3243-120050: RNCC: 5 | RNVC: 2

21 Mar 1984

5340-14-373-5410
Loop Clamp

143735410
5516-08NV: RNCC: 3 | RNVC: 2
5516-08NV: RNCC: 3 | RNVC: 2
NSA5516-08NV: RNCC: 5 | RNVC: 2
NSA5516-08NV: RNCC: 5 | RNVC: 2

21 Oct 1981

5340-14-490-3996
Control Rod

144903996
B0064-029F4: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-514-4756
Shelf Bracket

145144756
45218694: RNCC: 3 | RNVC: 2
45218694: RNCC: 5 | RNVC: 2
IF-192-1081: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-532-9520
Loop Clamp

145329520
46945088: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-14-463-2084
Angle Bracket

144632084
2156-01-065: RNCC: 3 | RNVC: 2
89296215: RNCC: 5 | RNVC: 2

26 May 1993

5340-14-509-1736
Mounting Bracket

145091736
ER3270: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-509-6503
Cover Strip

145096503
RA1M116090021N1: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-475-0847
Runner

144750847
1078413P00: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-480-9248
Mounting Plate

144809248
22387851: RNCC: 3 | RNVC: 2
22387851: RNCC: 5 | RNVC: 9

11 Apr 1996

5340-14-522-6973
Pipe Hanger

145226973
01248026: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-14-483-4933
Cover Strip

144834933
332A58-1558-21: RNCC: 3 | RNVC: 2

14 Sep 1996

5340-14-236-4729
Retaining Strap

142364729
NO PRIMARY REF14-236-4729: RNCC: 3 | RNVC: 2
50E1108: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-424-2078
Loop Clamp

144242078
SPGU92-25: RNCC: 3 | RNVC: 2
SPGU92-25: RNCC: 3 | RNVC: 2

19 May 1988

5340-14-462-9160
Mounting Plate

144629160
2085-04-027: RNCC: 3 | RNVC: 2
89482671: RNCC: 5 | RNVC: 2

5 May 1993

5340-14-529-9048
Detent Plunger

145299048
F05-207-00: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-401-3671
Access Cover

144013671
NO PRIMARY REF14-401-3671: RNCC: 3 | RNVC: 2
29762325: RNCC: 5 | RNVC: 9

5 Jun 1985

5340-14-481-0073
Snap Hook

144810073
902-MSQ-001: RNCC: 3 | RNVC: 2
SYQ3510: RNCC: 5 | RNVC: 2

16 Apr 1996

5340-14-387-7585
Retaining Strap

143877585
ST159-2M311-1P18: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-545-2194
Angle Bracket

145452194
853-203-296-0: RNCC: 3 | RNVC: 2

24 Mar 2005

5340-14-303-2902
Strap Fastener Loop

143032902
11506-007: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-305-2245
Retaining Strap

143052245
2131-0: RNCC: 3 | RNVC: 2
2131-00: RNCC: 5 | RNVC: 2
2131-0: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-395-6581
Anchor Strap

143956581
785-268: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-463-3872
Bail Handle

144633872
P0F309BZB: RNCC: 3 | RNVC: 2
POF309BZB: RNCC: 5 | RNVC: 2
91442983: RNCC: 5 | RNVC: 2

9 Jun 1993

5340-14-533-0568
Runner

145330568
AT200002: RNCC: 3 | RNVC: 2

21 Jan 2003

5340-14-482-8067
Mounting Plate

144828067
HSS831AHB310: RNCC: 3 | RNVC: 2
89167030: RNCC: 5 | RNVC: 2

25 Jul 1996

5340-14-517-0032
Angle Bracket

145170032
RA1M703850120A1: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-408-5583
Retaining Strap

144085583
5120000415: RNCC: 3 | RNVC: 2
91599724: RNCC: 5 | RNVC: 2

2 Apr 1986

5340-14-438-4193
Mounting Plate

144384193
7740: RNCC: 3 | RNVC: 2

21 Mar 1990

Load More Results