What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 81 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 81 of 446

5340-14-213-0931
Angle Bracket

142130931
307570: RNCC: 3 | RNVC: 2
SP-168A: RNCC: 6 | RNVC: 9

1 Jan 1964

5340-14-382-9577
Retaining Strap

143829577
BAZ7974: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-497-8830
Mounting Plate

144978830
PN1187-1: RNCC: 3 | RNVC: 2

22 Oct 1997

5340-14-521-3083
Loop Clamp

145213083
25GE17-5: RNCC: 3 | RNVC: 2
24GE17-5: RNCC: 5 | RNVC: 2

19 Jul 2000

5340-14-381-5428
Webbing Strap

143815428
005191210M: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-512-9165
Access Cover

145129165
562410: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-481-0607
Flush Catch Claw

144810607
10208125: RNCC: 3 | RNVC: 2

18 Apr 1996

5340-14-400-0024
Access Cover

144000024
607606: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-391-2213
Hand Crank Arm

143912213
2-19951: RNCC: 3 | RNVC: 2

1 Mar 1984

5340-14-361-8708
Locking Stay

143618708
2187-250B514: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-367-4419
Access Cover

143674419
15169841: RNCC: 3 | RNVC: 2
15169841: RNCC: 5 | RNVC: 2
15169841: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-235-4584
Bow Handle

142354584
503-3: RNCC: 3 | RNVC: 2
503-3: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-465-9809
Cushioning Pad

144659809
23192629-8: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-14-488-7407
Angle Bracket

144887407
1077972K00: RNCC: 3 | RNVC: 2

28 May 1997

5340-14-544-1977
Mounting Bracket

145441977
0 363 01 034 0: RNCC: 3 | RNVC: 2

10 Jan 2005

5340-14-512-9389
Mounting Bracket

145129389
420077: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-428-9747
Plug Button

144289747
09-545REP34: RNCC: 3 | RNVC: 2

3 Jan 1989

5340-14-488-6882
Access Cover

144886882
16719877: RNCC: 3 | RNVC: 2

28 May 1997

5340-14-379-4181
Anchor Strap

143794181
061218231: RNCC: 3 | RNVC: 9

1 Oct 1982

5340-14-382-5632
Compression Cup

143825632
16764970: RNCC: 3 | RNVC: 2
16764970: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-418-0843
Angle Bracket

144180843
004720990B: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-389-5125
Pipe Hanger

143895125
365A75-2341-20: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-399-0202
Mounting Plate

143990202
NO PRIMARY REF14-399-0202: RNCC: 3 | RNVC: 2
33301: RNCC: 5 | RNVC: 9
D20-33301: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-395-1904
Access Cover

143951904
203690: RNCC: 3 | RNVC: 2
85-692-5490: RNCC: 6 | RNVC: 9

2 Oct 1984

5340-14-465-7716
Loop Clamp

144657716
332000100: RNCC: 3 | RNVC: 2
Z00.N7141230011: RNCC: 5 | RNVC: 2
CLIC66-100: RNCC: 5 | RNVC: 2
66-100: RNCC: 5 | RNVC: 9

14 Oct 1993

5340-14-549-6823
Bumper

145496823
MC201-255142-31: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-14-465-4857
Cover Strip

144654857
365A25-0034-29: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-364-0939
Angle Bracket

143640939
366A24-0100-48: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-481-9779
Padlock Eye

144819779
LA8-D25915: RNCC: 3 | RNVC: 2
3389110254860: RNCC: 5 | RNVC: 2
323-9188: RNCC: 5 | RNVC: 2

13 Jun 1996

5340-14-349-1763
Loop Clamp

143491763
A0022-80S25: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-14-256-7932
Bumper

142567932
C00414-48: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-468-1770
Angle Bracket

144681770
78704-40-050: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-473-6572
Runner

144736572
332A61-3572-20: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-377-0830
Rigid Caster

143770830
332A58-1130-03: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-533-8888
Bow Handle

145338888
10.312.00: RNCC: 3 | RNVC: 2
10-312-00: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-482-9352
Angle Bracket

144829352
78706-40-050A: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-467-4584
Rod End Connector

144674584
312-00022-003: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-14-455-4401
Mounting Bracket

144554401
044U02-20398P: RNCC: 3 | RNVC: 2
89424812: RNCC: 5 | RNVC: 2
0904214E00: RNCC: 5 | RNVC: 2

21 May 1992

5340-14-490-2833
Mounting Plate

144902833
J05085-04-0400P016: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-369-8949
Bow Handle

143698949
NO PRIMARY REF14-369-8949: RNCC: 3 | RNVC: 2
108: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-428-2855
Anchor Strap

144282855
NO PRIMARY REF14-428-2855: RNCC: 3 | RNVC: 2
17995: RNCC: 5 | RNVC: 9

8 Dec 1988

5340-14-384-4766
Strap Fastener Loop

143844766
LN406-351PL2/2DET1: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-521-4652
Mounting Plate

145214652
611-S-100-03: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-14-372-7790
Access Cover

143727790
2074-1: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-554-9544
Mounting Bracket

145549544
XVAB204.A/C: RNCC: 3 | RNVC: 2
XVAB204.A/C: RNCC: 5 | RNVC: 9

12 Sep 2007

5340-14-377-2279
Rod End Connector

143772279
420075D: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-426-7435
Flush Lock

144267435
1277: RNCC: 3 | RNVC: 2
1277: RNCC: 5 | RNVC: 9

20 Sep 1988

5340-14-499-0371
Access Cover

144990371
13254096-8: RNCC: 3 | RNVC: 2
21164685-9: RNCC: 3 | RNVC: 2
21164685-9: RNCC: 5 | RNVC: 2
F300 0T 016 1952: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-360-7028
Support Hook

143607028
90465-08017: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-533-4129
Mounting Bracket

145334129
4E4-01005-000: RNCC: 3 | RNVC: 2
4E4-01005-000: RNCC: 5 | RNVC: 2

5 Feb 2003

5340-14-471-2355
Mounting Bracket

144712355
9599-607-12563: RNCC: 3 | RNVC: 2

9 Aug 1994

5340-14-525-4814
Mounting Plate

145254814
K15-975-PGS-014: RNCC: 3 | RNVC: 2

6 Jun 2001

5340-14-311-4063
Angle Bracket

143114063
341A69-1236-24: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-323-5707
Loop Clamp

143235707
A10811-9: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-287-0137
Access Cover

142870137
2-06075: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-536-0905
Mounting Bracket

145360905
3641V008: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-323-5425
Retaining Strap

143235425
182331: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-031-3934
Pipe Hanger

140313934
A11A232260052: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-515-7506
Handwheel

145157506
89090100105159A: RNCC: 3 | RNVC: 2

28 Jul 1999

5340-14-404-6648
Loop Clamp

144046648
68930009: RNCC: 3 | RNVC: 2
95001342: RNCC: 5 | RNVC: 2
91544967: RNCC: 5 | RNVC: 2
68930009: RNCC: 5 | RNVC: 9

20 Nov 1985

5340-14-338-6664
Angle Bracket

143386664
185035: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-453-5697
Detent Plunger

144535697
3158345: RNCC: 3 | RNVC: 2

26 Feb 1992

5340-14-300-0848
Strap End Clip

143000848
TH20G610: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-555-0940
Mounting Bracket

145550940
82157870000: RNCC: 3 | RNVC: 2

27 Sep 2007

5340-14-502-6010
Mounting Bracket

145026010
5010040257: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-393-0005
Leaf Spring

143930005
5000706990: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-14-404-0029
Door Hook

144040029
39225685: RNCC: 3 | RNVC: 2
39225685: RNCC: 5 | RNVC: 9

11 Sep 1985

5340-14-456-2802
Angle Bracket

144562802
T896AB15: RNCC: 3 | RNVC: 2
5045955: RNCC: 5 | RNVC: 9
T896AB15: RNCC: 5 | RNVC: 9

25 Jun 1992

5340-14-478-8215
Loop Holder

144788215
138TV143: RNCC: 3 | RNVC: 2
96075: RNCC: 5 | RNVC: 2

22 Nov 1995

5340-14-480-1666
Webbing Strap

144801666
LIAT00030: RNCC: 3 | RNVC: 2

23 Feb 1996

5340-14-403-9125
Clamping Catch

144039125
409505010004: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-550-5504
Swivel Caster

145505504
LRA-VPA 75G: RNCC: 3 | RNVC: 2

23 Jun 2006

5340-14-342-4934
Mending Plate

143424934
4770001670: RNCC: 3 | RNVC: 2

16 May 1977

5340-14-282-8526
Bow Handle

142828526
P05: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-358-5696
Loop Clamp

143585696
72809: RNCC: 3 | RNVC: 2
530103: RNCC: 5 | RNVC: 2

7 Sep 1979

5340-14-319-1846
Access Cover

143191846
20695807-5: RNCC: 3 | RNVC: 2
PRM061: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-470-4126
Angle Bracket

144704126
0390720300: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-464-8278
Rim Lock Set

144648278
12410-1-52N: RNCC: 3 | RNVC: 2

1 Sep 1993

5340-14-375-5954
Retaining Clip

143755954
2678-212M19P17: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-371-4291
Snap Hook

143714291
2481: RNCC: 3 | RNVC: 2
2-481: RNCC: 3 | RNVC: 2
41-54-10-2: RNCC: 5 | RNVC: 2
AS92: RNCC: 5 | RNVC: 2
3587790024814: RNCC: 5 | RNVC: 2
481: RNCC: 5 | RNVC: 9
9902-12-4810: RNCC: 5 | RNVC: 9

5 Aug 1981

5340-14-383-4228
Butt Hinge

143834228
NO PRIMARY REF14-383-4228: RNCC: 3 | RNVC: 2
20684032: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-547-5826
Access Cover

145475826
MPM010614: RNCC: 3 | RNVC: 2

17 Oct 2005

5340-14-475-3044
Access Cover

144753044
45253804: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-14-354-7372
Access Cover

143547372
120450: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-277-0848
Retaining Band

142770848
9133703: RNCC: 3 | RNVC: 2
9133703: RNCC: 3 | RNVC: 9

1 Jan 1971

5340-14-500-2713
Mounting Bracket

145002713
1667439M3+1667438M3: RNCC: 3 | RNVC: 2
907245M1: RNCC: 5 | RNVC: 9
F300 0T 024 2769: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-444-1641
Access Cover

144441641
4944016220: RNCC: 3 | RNVC: 2

18 Dec 1990

5340-14-451-1029
Access Cover

144511029
BLC235191: RNCC: 3 | RNVC: 2

30 Oct 1991

5340-14-464-3386
Plate Spacer

144643386
ST406M42P168: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-475-3042
Access Cover

144753042
45253800: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-14-388-2770
Runner

143882770
M4ZS500D5115A: RNCC: 3 | RNVC: 2

3 Nov 1983

5340-14-456-2919
Angle Bracket

144562919
16929953: RNCC: 3 | RNVC: 2

25 Jun 1992

5340-14-480-0318
Loop Clamp

144800318
20116696: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-464-2573
Retaining Strap

144642573
SMCFAATC0040D: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-526-5190
Mounting Bracket

145265190
GA66868: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-323-4909
Angle Bracket

143234909
0202128100: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-415-8051
Rod End Clevis

144158051
21111046: RNCC: 3 | RNVC: 2

18 May 1987

5340-14-550-4540
Mounting Bracket

145504540
242-91373: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-536-9723
Door Handle

145369723
23.44550CV: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-403-4637
Anchor Strap

144034637
3669831: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-390-1624
Pipe Hanger

143901624
366A75-3223-20: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-533-9959
Mounting Bracket

145339959
713088: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-550-7952
Protection Bellows

145507952
FTAA56A04: RNCC: 3 | RNVC: 2

17 Jul 2006

5340-14-394-2121
Rigid Caster

143942121
73322: RNCC: 3 | RNVC: 9

23 Jun 1984

5340-14-537-9067
Mounting Bracket

145379067
10704998000: RNCC: 3 | RNVC: 2

3 Dec 2003

5340-14-436-8493
Detent Plunger

144368493
DA2C297530: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-432-8500
Mounting Bracket

144328500
853-300-353-0: RNCC: 3 | RNVC: 2

28 Jun 1989

5340-14-396-9290
Mounting Plate

143969290
P158300600: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-346-0181
Runner

143460181
453-50020-000: RNCC: 3 | RNVC: 2
M334-01-20-00-18: RNCC: 3 | RNVC: 2
45350020000: RNCC: 5 | RNVC: 2
453-50020-000: RNCC: 5 | RNVC: 2
453-50020-000: RNCC: 5 | RNVC: 9

5 Nov 1977

5340-14-489-7272
Access Cover

144897272
30219-098: RNCC: 3 | RNVC: 2
92E4269: RNCC: 5 | RNVC: 2

13 Aug 1997

5340-14-439-3874
Plate Spacer

144393874
A47651: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-549-9713
Retaining Strap

145499713
EA6M701-15-04: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-477-6164
Access Cover

144776164
ADP159-100-121: RNCC: 3 | RNVC: 2
89139504: RNCC: 5 | RNVC: 2

13 Sep 1995

5340-14-465-4840
Butt Hinge

144654840
365A23-3021-22: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-310-6055
Retaining Strap

143106055
7-015-025: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-389-4960
Angle Bracket

143894960
365A65-3227-45: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-341-3304
Angle Bracket

143413304
C63077-1: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-453-8820
Mounting Plate

144538820
4-453016: RNCC: 3 | RNVC: 9
4-453016: RNCC: 5 | RNVC: 2

12 Mar 1992

5340-14-403-3206
Flush Lock

144033206
U401861850: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-394-6396
Flush Catch Claw

143946396
79099469: RNCC: 3 | RNVC: 2
79099469: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-530-5668
Support Hook

145305668
207190-0: RNCC: 3 | RNVC: 2

25 Jun 2002

5340-14-489-6871
Mounting Bracket

144896871
332P76-1005-03: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-516-0669
Mounting Bracket

145160669
10351229: RNCC: 3 | RNVC: 2
IF-192-2182: RNCC: 5 | RNVC: 9

8 Sep 1999

5340-14-472-8562
Arched Cushion

144728562
MAT169-0027F18DE14: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-416-2018
Elbow Catch

144162018
0285321360: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-468-2291
Anchor Strap

144682291
201988-1: RNCC: 3 | RNVC: 2

15 Feb 1994

5340-14-234-4365
Retaining Strap

142344365
NO PRIMARY REF14-234-4365: RNCC: 3 | RNVC: 2
TB1904CRAMP0NDECHEVR0N: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-475-0563
Protection Bellows

144750563
MAT424-180F29: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-480-9563
Mounting Plate

144809563
265702: RNCC: 3 | RNVC: 2

11 Apr 1996

5340-14-368-3309
Bumper

143683309
NO PRIMARY REF14-368-3309: RNCC: 3 | RNVC: 2
82-05-002: RNCC: 5 | RNVC: 9
8205002: RNCC: 5 | RNVC: 9

20 Feb 1981

5340-14-316-2665
Mounting Bracket

143162665
0249967400: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-451-7860
Access Cover

144517860
TB3030202: RNCC: 1 | RNVC: 2
E1100-11: RNCC: 3 | RNVC: 2
E1100-11: RNCC: 5 | RNVC: 9

4 Dec 1991

5340-14-291-2221
Loop Clamp

142912221
158082: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-349-9103
Retaining Strap

143499103
7001: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-424-3995
Retaining Strap

144243995
16250851: RNCC: 3 | RNVC: 2
16250851: RNCC: 5 | RNVC: 9

19 May 1988

5340-14-202-5951
Retaining Strap

142025951
0000090214: RNCC: 3 | RNVC: 2
0000090214: RNCC: 5 | RNVC: 9
90214: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-14-441-5901
Mounting Bracket

144415901
E05300304: RNCC: 3 | RNVC: 2

4 Sep 1990

5340-14-550-3907
Lock Bolt

145503907
132-90101-907: RNCC: 3 | RNVC: 2

19 Jun 2006

5340-14-550-4832
Mounting Bracket

145504832
RA1A702436143: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-409-6460
Cover Strip

144096460
DA1D203363001A1: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-461-6622
Expansion Plug

144616622
VK62X8: RNCC: 3 | RNVC: 2

19 Mar 1993

5340-14-552-6350
Angle Bracket

145526350
RA1M701346451A1: RNCC: 3 | RNVC: 2

18 Jan 2007

5340-14-435-2628
Access Cover

144352628
16762482: RNCC: 3 | RNVC: 2

2 Nov 1989

5340-14-420-4510
Anchor Strap

144204510
2369: RNCC: 3 | RNVC: 2

10 Dec 1987

5340-14-368-3225
Rod End Clevis

143683225
004142050P: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-14-546-4915
Locking Stay

145464915
61027018AA: RNCC: 3 | RNVC: 2

8 Jul 2005

5340-14-525-2122
Access Cover

145252122
06440P008004: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-493-6510
Mounting Bracket

144936510
00510002100639A: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-504-6345
Mounting Plate

145046345
F00190485: RNCC: 3 | RNVC: 2
F00190485: RNCC: 5 | RNVC: 9

25 Feb 1998

5340-14-502-5023
Mounting Bracket

145025023
5000335209: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-383-1876
Anchor Strap

143831876
MY2051511560G01: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-399-0538
Mounting Plate

143990538
476342N: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-512-9763
Butt Hinge

145129763
NOREF5340860504821: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-551-7417
Mounting Bracket

145517417
RA1M702416097: RNCC: 3 | RNVC: 2

19 Oct 2006

5340-14-459-3637
Angle Bracket

144593637
T424AB20: RNCC: 3 | RNVC: 2
5046497: RNCC: 5 | RNVC: 9
T424AB20: RNCC: 5 | RNVC: 9

26 Nov 1992

5340-14-551-3788
Loop Clamp

145513788
47136293: RNCC: 3 | RNVC: 2

14 Sep 2006

5340-14-461-0192
Section Block Clamp

144610192
16787423: RNCC: 3 | RNVC: 2
16787423: RNCC: 5 | RNVC: 9

17 Feb 1993

5340-14-512-8913
Protection Bellows

145128913
550659: RNCC: 3 | RNVC: 9

24 Feb 1999

5340-14-518-0023
Webbing Strap

145180023
10328533: RNCC: 3 | RNVC: 2

21 Jan 2000

5340-14-508-7901
Mounting Bracket

145087901
PE 12707: RNCC: 3 | RNVC: 2
PE12707: RNCC: 5 | RNVC: 9

30 Sep 1998

5340-14-500-6376
Loop Clamp

145006376
E64201128000: RNCC: 3 | RNVC: 2
F300 0T 024 6562: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-461-9931
Retaining Strap

144619931
ST406M75P588: RNCC: 3 | RNVC: 2
BJQM75P588: RNCC: 5 | RNVC: 2

31 Mar 1993

5340-14-522-3163
Mounting Bracket

145223163
10441462: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-14-547-1742
Retaining Strap

145471742
5010631083: RNCC: 3 | RNVC: 2

30 Sep 2005

5340-14-450-6928
Mounting Bracket

144506928
5000740629: RNCC: 3 | RNVC: 2
89471906: RNCC: 5 | RNVC: 2

16 Oct 1991

5340-14-500-7518
Mounting Plate

145007518
E64009998222: RNCC: 3 | RNVC: 2
F300 0T 024 7715: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-391-6000
Loop Clamp

143916000
494322G0002: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-513-7138
Cable Retractor

145137138
104557: RNCC: 3 | RNVC: 2

7 Apr 1999

5340-14-222-8459
Cover Strip

142228459
3160S21-12-006: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-427-7778
Bumper

144277778
6284-2706: RNCC: 3 | RNVC: 2

9 Nov 1988

5340-14-388-4192
Retaining Band

143884192
00811521851: RNCC: 3 | RNVC: 2
00811-5-2-1851: RNCC: 5 | RNVC: 2

3 Nov 1983

5340-14-335-2760
Butt Hinge

143352760
16334203: RNCC: 3 | RNVC: 2
16334203: RNCC: 3 | RNVC: 9

30 Jun 1976

5340-14-226-4927
Mending Plate

142264927
0000473380: RNCC: 3 | RNVC: 2
0000473380: RNCC: 5 | RNVC: 9
473380: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-043-1257
Access Cover

140431257
065T13-717891S: RNCC: 3 | RNVC: 2

10 Apr 1984

5340-14-458-9635
Mounting Bracket

144589635
D9245: RNCC: 3 | RNVC: 2

10 Nov 1992

5340-14-224-4125
Loop Clamp

142244125
0325620: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-482-7916
Mounting Plate

144827916
1114502A00: RNCC: 3 | RNVC: 2

25 Jul 1996

5340-14-502-6991
Cover Strip

145026991
1069861: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-564-8641
Utility Access Door

145648641
P70193 107000: RNCC: 3 | RNVC: 2
P70193 107000: RNCC: 5 | RNVC: 9

11 Jun 2010

5340-14-370-6224
Access Cover

143706224
700767: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-546-7599
Angle Bracket

145467599
RA1M702201191N1: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-14-367-6241
Anchor Strap

143676241
B16401: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-508-1266
Mounting Bracket

145081266
10068220: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-394-6375
Mounting Plate

143946375
79092903: RNCC: 3 | RNVC: 2
79092903: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-403-4217
Rod End Clevis

144034217
1861392M3: RNCC: 3 | RNVC: 2
1861392M3: RNCC: 5 | RNVC: 9

21 Aug 1985

5340-14-502-8136
Mounting Bracket

145028136
8Y8604: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-509-2085
Access Cover

145092085
A128294: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-317-2245
Mending Plate

143172245
0206150780: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-430-0381
Access Cover

144300381
29688134: RNCC: 3 | RNVC: 2
29688134: RNCC: 5 | RNVC: 9

27 Feb 1989

5340-14-520-4198
Mounting Plate

145204198
39987751: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-555-6760
Mounting Bracket

145556760
720439: RNCC: 3 | RNVC: 2

6 Dec 2007

5340-14-500-6394
Mounting Plate

145006394
E64009998033: RNCC: 3 | RNVC: 2
F300 0T 024 6580: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-531-1308
Mounting Bracket

145311308
10633362: RNCC: 3 | RNVC: 2

24 Jul 2002

5340-14-307-1895
Loop Clamp

143071895
21S0500503: RNCC: 3 | RNVC: 2
21S0500503: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-417-5325
Block Clamp

144175325
4047A445AREP404: RNCC: 3 | RNVC: 2
502017: RNCC: 5 | RNVC: 2

8 Jul 1987

5340-14-418-9032
Rod End Clevis

144189032
DA1D775235001: RNCC: 3 | RNVC: 2

16 Sep 1987

5340-14-404-1408
Access Cover

144041408
20868886: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-473-9455
Access Cover

144739455
39252204: RNCC: 3 | RNVC: 2
39252204: RNCC: 3 | RNVC: 9

18 Jan 1995

5340-14-534-3189
Rod End Clevis

145343189
NNM0021020400135: RNCC: 2 | RNVC: 2

19 Mar 2003

5340-14-425-2879
Anchor Strap

144252879
30330027C: RNCC: 3 | RNVC: 2

30 Jun 1988

5340-14-418-8000
Access Cover

144188000
1254-136C505: RNCC: 3 | RNVC: 2
1254-136C505: RNCC: 5 | RNVC: 2

16 Sep 1987

5340-14-450-1917
Access Cover

144501917
29412336: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-208-6475
Access Cover

142086475
426025254: RNCC: 3 | RNVC: 9

1 Jan 1964

5340-14-496-5691
Access Cover

144965691
06800098: RNCC: 3 | RNVC: 2
F300 0T 021 7220: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-491-2054
Mounting Plate

144912054
311905250B: RNCC: 3 | RNVC: 2
F300 0T 001 8614: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-496-2880
Access Cover

144962880
2103654: RNCC: 3 | RNVC: 2
F300 0T 021 3494: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-485-6290
Access Cover

144856290
NM30802: RNCC: 3 | RNVC: 2

6 Feb 1997

5340-14-362-9669
Retaining Band

143629669
503R69: RNCC: 3 | RNVC: 2
5000055235: RNCC: 5 | RNVC: 2
5000055235: RNCC: 5 | RNVC: 9

3 Apr 1980

5340-14-291-3050
Access Cover

142913050
20754: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-385-3019
Loop Clamp

143853019
397071: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-505-1045
Rim Lock

145051045
61028: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-367-4344
Anchor Strap

143674344
15457995: RNCC: 3 | RNVC: 2
15457995: RNCC: 5 | RNVC: 2
15457995: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-379-3689
Access Cover

143793689
40035: RNCC: 3 | RNVC: 9

1 Oct 1982

5340-14-469-6420
Rim Latch

144696420
PM1A581210112U1: RNCC: 3 | RNVC: 2
PM1A581210112U1: RNCC: 5 | RNVC: 2

4 May 1994

5340-14-520-3182
Access Cover

145203182
3511 191 98562: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-500-3797
Access Cover

145003797
C62102211000: RNCC: 3 | RNVC: 2
F300 0T 024 3898: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-471-9660
Angle Bracket

144719660
65737-9: RNCC: 3 | RNVC: 2
P02559: RNCC: 5 | RNVC: 2

28 Sep 1994

5340-14-385-4061
Casement Fastener

143854061
0285325310: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-417-1606
Angle Bracket

144171606
366A21-1243-2902: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-14-365-6712
Buckle

143656712
A2024-16: RNCC: 3 | RNVC: 9

8 Oct 1980

5340-14-338-4516
Corner Brace

143384516
330A25-0852-21: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-225-8580
Loop Clamp

142258580
3160S42-10-007: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-400-1686
Butt Hinge

144001686
FD1C234-14822: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-293-9310
Pipe Hanger

142939310
53951-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-301-7065
Pipe Hanger

143017065
53973-4: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-504-6322
Mounting Plate

145046322
F00185849: RNCC: 3 | RNVC: 2
F00185849: RNCC: 5 | RNVC: 9

25 Feb 1998

5340-14-353-5241
Retaining Strap

143535241
830399: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-287-1550
Angle Bracket

142871550
372905: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-288-3112
Butt Hinge

142883112
1367902: RNCC: 3 | RNVC: 2
3037902: RNCC: 5 | RNVC: 2
KAY400SS: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-495-6856
Detent Plunger

144956856
FKPU15X30: RNCC: 3 | RNVC: 2
F300 0T 019 6280: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-421-2349
Angle Bracket

144212349
C100: RNCC: 3 | RNVC: 2
613025: RNCC: 3 | RNVC: 2
102122: RNCC: 3 | RNVC: 9

11 Jan 1988

5340-14-523-7179
Mounting Plate

145237179
T3522881: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-497-8621
Bow Handle

144978621
F300 0T 014 9318: RNCC: 3 | RNVC: 2
2ED110N53: RNCC: 5 | RNVC: 9

22 Oct 1997

5340-14-457-6597
Webbing Strap

144576597
B2000-CAT2-LG1M: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-246-8886
Retaining Strap

142468886
70888021: RNCC: 3 | RNVC: 2
70888021: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-534-1017
Mounting Bracket

145341017
332A58-1214-0051: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-312-1162
Support Hook

143121162
184423: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-322-2254
Bumper

143222254
055E02-519560F: RNCC: 3 | RNVC: 2
0519560F00: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-367-9696
Bow Handle

143679696
61404: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-213-1531
Mounting Bracket

142131531
T863-56M1P45B: RNCC: 3 | RNVC: 2
T86356M1P45: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-445-0523
Loop Clamp

144450523
533092: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-14-438-2406
Loop Clamp

144382406
A11C602221030: RNCC: 3 | RNVC: 2

7 Mar 1990

5340-14-346-6635
Access Cover

143466635
02010011200: RNCC: 3 | RNVC: 2
020100112: RNCC: 5 | RNVC: 2
419640: RNCC: 5 | RNVC: 2

12 Dec 1977

5340-14-488-4276
Locking Stay

144884276
45203B31: RNCC: 3 | RNVC: 2

7 May 1997

5340-14-238-7730
Rod End Clevis

142387730
A409: RNCC: 3 | RNVC: 2
T0P7A409: RNCC: 5 | RNVC: 2
TOP7A409: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-378-9991
Access Cover

143789991
68097: RNCC: 3 | RNVC: 2
91456032: RNCC: 5 | RNVC: 2
91456032: RNCC: 5 | RNVC: 2
068097: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-14-353-1926
Access Cover

143531926
16450639: RNCC: 3 | RNVC: 2
16450639: RNCC: 3 | RNVC: 9

8 Dec 1978

5340-14-316-9145
Anchor Strap

143169145
000MA0427F4REPAH45L12: RNCC: 3 | RNVC: 2
000MA427F32REPAH45L12: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-382-6745
Mending Plate

143826745
0264351660: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-548-1230
Mounting Bracket

145481230
5010282362: RNCC: 3 | RNVC: 2

12 Dec 2005

5340-14-533-6645
Mounting Bracket

145336645
F1264448: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-14-450-1715
Mounting Bracket

144501715
92PD260129: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-443-9876
Retaining Strap

144439876
007829010P: RNCC: 3 | RNVC: 2

18 Dec 1990

5340-14-505-2043
Mounting Plate

145052043
20615049: RNCC: 3 | RNVC: 2

13 Mar 1998

5340-14-389-0760
Rod End Clevis

143890760
DA2C775223001: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-537-4800
Cushioning Pad

145374800
6501BRG110028: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-382-4958
Access Cover

143824958
16932040: RNCC: 3 | RNVC: 2
16932040: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-439-2023
Swivel Caster

144392023
20318737: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-482-9129
Access Cover

144829129
A11A761314010A3: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-421-5758
Plug Button

144215758
VD1: RNCC: 3 | RNVC: 2

19 Jan 1988

5340-14-397-4185
Anchor Strap

143974185
211975: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-534-7481
Access Cover

145347481
46023523: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-407-9882
Plug Button

144079882
M4DW6021874101: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-460-0731
Mounting Plate

144600731
PM1A716025631: RNCC: 3 | RNVC: 2
PM1A716025631: RNCC: 5 | RNVC: 2

7 Jan 1993

5340-14-532-9267
Access Cover

145329267
27169819-4: RNCC: 3 | RNVC: 2
8036510E00: RNCC: 5 | RNVC: 2

14 Jan 2003

5340-14-423-8192
Loop Clamp

144238192
MR26,5: RNCC: 3 | RNVC: 2
620-858-591-0: RNCC: 5 | RNVC: 2

28 Apr 1988

5340-14-555-9523
Loop Clamp

145559523
854628: RNCC: 3 | RNVC: 2
854628-5: RNCC: 3 | RNVC: 2

14 Jan 2008

5340-14-372-6321
Retaining Strap

143726321
NO PRIMARY REF14-372-6321: RNCC: 3 | RNVC: 2
5000240909: RNCC: 5 | RNVC: 2
0-02-147: RNCC: 5 | RNVC: 9
24769: RNCC: 5 | RNVC: 9
5000240909: RNCC: 5 | RNVC: 9

21 Sep 1981

5340-14-539-6520
Mounting Bracket

145396520
21231679-00: RNCC: 3 | RNVC: 2
21231679-9: RNCC: 5 | RNVC: 2

28 Jan 2004

5340-14-341-1993
Angle Bracket

143411993
M3E707-093: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-479-5931
Mounting Plate

144795931
1111125F00: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-14-483-8223
Mounting Bracket

144838223
N120086: RNCC: 3 | RNVC: 2

3 Oct 1996

5340-14-547-0305
Bridge Clamp

145470305
901615: RNCC: 3 | RNVC: 2
89532344: RNCC: 5 | RNVC: 2

15 Sep 2005

5340-14-530-6844
Cover Strip

145306844
T524A2001537: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-314-3787
Retaining Strap

143143787
180465: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-554-9411
Loop Clamp

145549411
78651DH16BF: RNCC: 1 | RNVC: 2
78651DH16BF: RNCC: 3 | RNVC: 2

11 Sep 2007

5340-14-505-6572
Mounting Bracket

145056572
E25001087000: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-482-9643
Synchro Clamp

144829643
PM1A711220505: RNCC: 3 | RNVC: 2
PM1A711220505: RNCC: 5 | RNVC: 2

1 Aug 1996

5340-14-461-1959
Mounting Bracket

144611959
5000138671: RNCC: 3 | RNVC: 2

2 Mar 1993

5340-14-487-5549
Angle Bracket

144875549
78721DH43B: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-446-2064
Angle Bracket

144462064
0120701024: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-537-3716
Buckle

145373716
4919194: RNCC: 3 | RNVC: 9

28 Oct 2003

5340-14-353-2767
Handle Grip

143532767
92205205: RNCC: 3 | RNVC: 2
5205: RNCC: 5 | RNVC: 2
C525R: RNCC: 5 | RNVC: 2
91365360: RNCC: 5 | RNVC: 2

8 Dec 1978

5340-14-376-7812
Butt Hinge

143767812
DA2C121317845N1: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-544-3382
Mounting Plate

145443382
82071794000: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-14-554-9423
Loop Clamp

145549423
78651DH11AG: RNCC: 1 | RNVC: 2
78651DH11AG: RNCC: 3 | RNVC: 2

11 Sep 2007

5340-14-435-2271
Mounting Plate

144352271
28188097000-36: RNCC: 3 | RNVC: 2

30 Oct 1989

5340-14-478-1381
Loop Clamp

144781381
037547: RNCC: 3 | RNVC: 2

11 Oct 1995

5340-14-551-3572
Retaining Band

145513572
RA1A701666817: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-441-9299
Loop Clamp

144419299
E05400316: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-481-7716
Retaining Band

144817716
467808: RNCC: 3 | RNVC: 2

30 May 1996

5340-14-459-8478
Mounting Plate

144598478
16787676: RNCC: 3 | RNVC: 2
16787676: RNCC: 5 | RNVC: 9

17 Dec 1992

5340-14-434-3610
Retaining Strap

144343610
39228202: RNCC: 3 | RNVC: 2
39228202: RNCC: 5 | RNVC: 9

20 Sep 1989

5340-14-532-3218
Mounting Plate

145323218
F1264523: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-544-2855
Loop Clamp

145442855
538.PA: RNCC: 3 | RNVC: 2

17 Jan 2005

5340-14-532-9589
Mounting Bracket

145329589
MB5466F00: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-14-335-8799
Webbing Strap

143358799
195152: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-480-9356
Mounting Plate

144809356
38225620: RNCC: 3 | RNVC: 2
38225620: RNCC: 5 | RNVC: 9

11 Apr 1996

5340-14-305-0807
Access Cover

143050807
3511 180 01211: RNCC: 3 | RNVC: 2
3511 180 01211: RNCC: 5 | RNVC: 2
3511-180-01211: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-479-2216
Mounting Plate

144792216
A99203-1: RNCC: 3 | RNVC: 2
91579225: RNCC: 5 | RNVC: 2
A99203-1: RNCC: 5 | RNVC: 2
A99203-1: RNCC: 5 | RNVC: 9

19 Dec 1995

5340-14-342-4557
Webbing Strap

143424557
ST400S11G11-11: RNCC: 3 | RNVC: 2

16 May 1977

5340-14-481-1650
Lock Key

144811650
FTAA17A03: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-14-404-7308
Control Rod

144047308
39049441: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-520-1766
Mounting Bracket

145201766
30344838X: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-547-4432
Loop Clamp

145474432
5010571696: RNCC: 3 | RNVC: 2
51313113032: RNCC: 3 | RNVC: 2

13 Oct 2005

5340-14-435-3453
Butt Hinge

144353453
1327: RNCC: 3 | RNVC: 9

8 Nov 1989

5340-14-250-3987
Butt Hinge

142503987
26709: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-534-2923
Retaining Strap

145342923
10683435000: RNCC: 3 | RNVC: 2

19 Mar 2003

5340-14-206-9174
Loop Clamp

142069174
45N32: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-368-1772
Rigid Caster

143681772
158127901010401: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-14-488-2137
Mounting Plate

144882137
29658471: RNCC: 3 | RNVC: 2
29658471: RNCC: 3 | RNVC: 9

23 Apr 1997

5340-14-508-1955
Runner

145081955
1661157: RNCC: 3 | RNVC: 9

26 Aug 1998

5340-14-520-3407
Angle Bracket

145203407
40146442: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-537-4655
Angle Bracket

145374655
RA1B703126135: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-385-8779
Corner Brace

143858779
86750: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-403-4456
Mending Plate

144034456
8150300: RNCC: 3 | RNVC: 2
313223: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-466-0596
Mounting Bracket

144660596
D51251: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-14-512-8832
Loop Clamp

145128832
550499: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-546-4529
Metal Grille

145464529
P300007720: RNCC: 3 | RNVC: 2

6 Jul 2005

5340-14-467-2696
Arched Cushion

144672696
BFC20842: RNCC: 3 | RNVC: 2
89172029: RNCC: 5 | RNVC: 2

21 Dec 1993

5340-14-496-9628
Detent Plunger

144969628
4090528: RNCC: 3 | RNVC: 2
4090528: RNCC: 5 | RNVC: 2
F300 0T 022 3313: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-536-0815
Mounting Bracket

145360815
1817545C1: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-545-1081
Mounting Bracket

145451081
19219627: RNCC: 3 | RNVC: 2

17 Mar 2005

5340-14-400-1601
Synchro Clamp

144001601
9136043000: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-523-0355
Butt Hinge

145230355
10234: RNCC: 3 | RNVC: 2
G10234: RNCC: 5 | RNVC: 9

20 Dec 2000

5340-14-516-9941
Mounting Plate

145169941
RA1M215150170N1: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-552-9318
Retaining Bail

145529318
500358396: RNCC: 3 | RNVC: 2
0028070: RNCC: 5 | RNVC: 2

14 Feb 2007

5340-14-380-1125
Control Rod

143801125
BBZ0279: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-522-0143
Snap Hook

145220143
2857: RNCC: 3 | RNVC: 2

27 Sep 2000

5340-14-517-7682
Mounting Plate

145177682
009894050P: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-14-515-6204
Mounting Plate

145156204
2W5825: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-459-2175
Cover Strip

144592175
PM1A129220203: RNCC: 3 | RNVC: 2
PM1A129220203: RNCC: 5 | RNVC: 2

19 Nov 1992

5340-14-476-9447
Webbing Strap

144769447
3805005: RNCC: 3 | RNVC: 2
3805005: RNCC: 5 | RNVC: 2

12 Jul 1995

5340-14-504-8295
Retaining Strap

145048295
0315777560: RNCC: 3 | RNVC: 2

4 Mar 1998

5340-14-439-3952
Mounting Bracket

144393952
DA2C642020840: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-504-3335
Access Cover

145043335
3900559M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-494-4771
Access Cover

144944771
T53 215 90: RNCC: 3 | RNVC: 2
F300 0T 017 3820: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-516-3587
Plug Button

145163587
2467A016: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-261-2190
Rod End Clevis

142612190
175-44-67: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-454-2605
Access Cover

144542605
39117489: RNCC: 3 | RNVC: 9

26 Mar 1992

5340-14-463-0414
Access Cover

144630414
EDM0115: RNCC: 3 | RNVC: 2
91363518: RNCC: 5 | RNVC: 2

12 May 1993

5340-14-379-4008
Loop Clamp

143794008
883045: RNCC: 3 | RNVC: 2
083045: RNCC: 5 | RNVC: 2

1 Oct 1982

5340-14-467-7965
Mounting Bracket

144677965
MB2456F00: RNCC: 3 | RNVC: 2

27 Jan 1994

5340-14-380-4747
Access Cover

143804747
3132-350C609: RNCC: 3 | RNVC: 2

29 Nov 1982

5340-14-349-2535
Access Cover

143492535
1185975: RNCC: 3 | RNVC: 2
1185975: RNCC: 5 | RNVC: 2

22 May 1978

5340-14-390-7548
Loop Clamp

143907548
00 00 280 753: RNCC: 3 | RNVC: 9

1 Mar 1984

5340-14-401-3356
Tubular Fairlead

144013356
NO PRIMARY REF14-401-3356: RNCC: 3 | RNVC: 2
20033832: RNCC: 5 | RNVC: 9

5 Jun 1985

5340-14-490-2906
Mounting Plate

144902906
J05085-02-0700P003: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-340-2691
Mending Plate

143402691
M271-2020: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-528-9956
Loop Clamp

145289956
705296: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-14-548-6176
Angle Bracket

145486176
RA1B702606170A1: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-507-6845
Mounting Plate

145076845
10382554: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-420-0895
Loop Clamp

144200895
119349: RNCC: 3 | RNVC: 2

18 Nov 1987

5340-14-370-7157
Runner

143707157
217940: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-472-3463
Bow Handle

144723463
5520075: RNCC: 3 | RNVC: 2

19 Oct 1994

5340-14-515-2954
Mounting Plate

145152954
0009180102: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-523-8871
Mounting Bracket

145238871
21258120: RNCC: 3 | RNVC: 2

8 Feb 2001

5340-14-508-9209
Cable Retractor

145089209
EXEL2K2P6TC8071507RN: RNCC: 3 | RNVC: 2

7 Oct 1998

5340-14-386-1074
Angle Bracket

143861074
394963: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-449-6382
Mounting Bracket

144496382
623712: RNCC: 3 | RNVC: 2

28 Aug 1991

5340-14-524-0397
Mounting Bracket

145240397
SUPPO01970A00: RNCC: 3 | RNVC: 2
SUPPO01970X00: RNCC: 5 | RNVC: 9

22 Feb 2001

5340-14-390-7572
Retaining Strap

143907572
T0P7L203: RNCC: 3 | RNVC: 2
TOP7L203: RNCC: 5 | RNVC: 2

1 Mar 1984

5340-14-525-2437
Mounting Bracket

145252437
06820P020006: RNCC: 3 | RNVC: 2
251977510001: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-399-9983
Mounting Plate

143999983
606371: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-384-7120
Mounting Plate

143847120
20068425: RNCC: 3 | RNVC: 2
20068425: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-495-9153
Webbing Strap

144959153
F00161848: RNCC: 3 | RNVC: 2
F00161848: RNCC: 5 | RNVC: 9

15 Oct 1997

5340-14-393-5569
Corner Brace

143935569
254457: RNCC: 3 | RNVC: 2
254457: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-14-541-3144
Mounting Plate

145413144
1SH41764161: RNCC: 3 | RNVC: 2

27 May 2004

5340-14-439-6725
Mounting Bracket

144396725
16316360: RNCC: 3 | RNVC: 2
16316360: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-338-3380
Handwheel

143383380
GSM137-013F20: RNCC: 3 | RNVC: 2
GSM137-13F20: RNCC: 5 | RNVC: 2

6 Nov 1976

5340-14-510-1121
Access Cover

145101121
F212-55-14RS1: RNCC: 3 | RNVC: 2
F212-5514RS1: RNCC: 5 | RNVC: 2
1560AA8007675: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-426-2098
Angle Bracket

144262098
AEAV000101-630A: RNCC: 3 | RNVC: 2
85-693-5097: RNCC: 6 | RNVC: 9

4 Aug 1988

5340-14-527-4794
Loop Clamp

145274794
268569027: RNCC: 3 | RNVC: 2
6981-37: RNCC: 5 | RNVC: 9
9406981378: RNCC: 5 | RNVC: 9

30 Oct 2001

5340-14-370-7763
Tubular Fairlead

143707763
AM452-80: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-255-4455
Cover Strip

142554455
321A71-0155-20: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-500-8221
Section Block Clamp

145008221
E64009998073: RNCC: 3 | RNVC: 2
F300 0T 024 8423: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-447-2902
Clamping Catch

144472902
TL802BY: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-484-6128
Runner

144846128
2045197J: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-515-1883
Lock Bolt

145151883
10465667: RNCC: 3 | RNVC: 2
1O465667: RNCC: 5 | RNVC: 2

13 Jul 1999

5340-14-335-2744
Control Rod

143352744
0031184397: RNCC: 3 | RNVC: 2
0031184397: RNCC: 3 | RNVC: 2
0031184397: RNCC: 5 | RNVC: 9

30 Jun 1976

5340-14-380-2043
Corner Brace

143802043
460106Q: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-534-7527
Access Cover

145347527
47081218: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-522-6650
Detent Plunger

145226650
0852548Y00: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-14-401-3110
Butt Hinge

144013110
222896: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-462-6809
Mounting Bracket

144626809
008569175: RNCC: 3 | RNVC: 9
8569175: RNCC: 5 | RNVC: 9

28 Apr 1993

5340-14-546-2943
Mounting Bracket

145462943
82126221000: RNCC: 3 | RNVC: 2

22 Jun 2005

5340-14-400-0291
Mending Plate

144000291
408294: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-502-6063
Mounting Plate

145026063
5010142268: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-513-8079
Mounting Plate

145138079
DE21834: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-486-4885
Angle Bracket

144864885
576497: RNCC: 3 | RNVC: 2

21 Mar 1997

5340-14-541-5398
Angle Bracket

145415398
1092969: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-437-3648
Bridge Clamp

144373648
05300503: RNCC: 3 | RNVC: 2
D05300503: RNCC: 5 | RNVC: 2
F300 0T 006 6628: RNCC: 6 | RNVC: 9

31 Jan 1990

5340-14-551-3565
Angle Bracket

145513565
RA1A702346387: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-361-5560
Detent Plunger

143615560
03022012100: RNCC: 3 | RNVC: 2
030220121: RNCC: 5 | RNVC: 2

24 Jan 1980

5340-14-359-7150
Access Cover

143597150
128322: RNCC: 3 | RNVC: 2

15 Oct 1979

5340-14-479-2315
Access Cover

144792315
85354-ABG: RNCC: 3 | RNVC: 2
85354-ABG: RNCC: 5 | RNVC: 2
85354-ABG: RNCC: 5 | RNVC: 9

19 Dec 1995

5340-14-547-4327
Access Cover

145474327
5001845490: RNCC: 3 | RNVC: 2
19593: RNCC: 3 | RNVC: 2

13 Oct 2005

5340-14-439-2069
Mounting Plate

144392069
16006270: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-556-0255
Mounting Bracket

145560255
0319768260: RNCC: 3 | RNVC: 2

22 Jan 2008

5340-14-403-4424
Handwheel

144034424
8030600: RNCC: 3 | RNVC: 2
313048: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-526-4622
Angle Bracket

145264622
RA1M706216130N1: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-528-6932
Mounting Bracket

145286932
GA67075: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-14-470-9982
Mounting Plate

144709982
DA4C314007020: RNCC: 3 | RNVC: 2

20 Jul 1994

5340-14-307-9701
Angle Bracket

143079701
26255455: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-547-7723
Mounting Bracket

145477723
10645884: RNCC: 3 | RNVC: 2

12 Nov 2005

5340-14-482-6814
Mounting Plate

144826814
47134347: RNCC: 3 | RNVC: 2

18 Jul 1996

5340-14-369-7753
Angle Bracket

143697753
A11A232253011: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-401-3243
Mounting Bracket

144013243
02K5547040: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-506-0401
Pipe Hanger

145060401
RA1M701772141: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-14-536-0810
Mounting Bracket

145360810
1822199C1: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-535-2109
Utility Access Door

145352109
0301-47832: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-332-2442
Access Cover

143322442
18088: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-396-5481
Access Cover

143965481
E885354: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-503-9821
Runner

145039821
GLISS93961A00: RNCC: 3 | RNVC: 2
CLISS93961A00: RNCC: 5 | RNVC: 9
GLISS93961X00: RNCC: 5 | RNVC: 9

4 Feb 1998

5340-14-547-3923
Access Cover

145473923
COF543EA001: RNCC: 3 | RNVC: 2

11 Oct 2005

5340-14-397-1264
Access Cover

143971264
20321138: RNCC: 3 | RNVC: 2
20321138: RNCC: 5 | RNVC: 9

1 Dec 1984

5340-14-395-9798
Access Cover

143959798
888152060: RNCC: 3 | RNVC: 9
152060: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-542-6568
Access Cover

145426568
61397602AB: RNCC: 3 | RNVC: 2
61397602AA: RNCC: 5 | RNVC: 9

23 Jul 2004

5340-14-518-9048
Access Cover

145189048
MC1665F00: RNCC: 3 | RNVC: 2

25 Feb 2000

5340-14-516-9480
Access Cover

145169480
ZP011423Y00: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-524-1767
Locking Stay

145241767
2251108: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-254-9033
Access Cover

142549033
202463: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-397-9501
Anchor Strap

143979501
404096: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-502-7169
Access Cover

145027169
1167080: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-375-2933
Anchor Strap

143752933
136-417: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-361-7751
Webbing Strap

143617751
18825: RNCC: 3 | RNVC: 2
530001: RNCC: 5 | RNVC: 2
1743: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-14-415-8881
Access Cover

144158881
TRSE04P057443: RNCC: 3 | RNVC: 2

26 May 1987

5340-14-514-9364
Block Clamp

145149364
RA1M704834523A2: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-14-396-1747
Anchor Strap

143961747
206003: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-454-6879
Angle Bracket

144546879
39959343: RNCC: 3 | RNVC: 9

9 Apr 1992

5340-14-545-1076
Access Cover

145451076
505-802: RNCC: 3 | RNVC: 2

17 Mar 2005

5340-14-542-7583
Access Cover

145427583
61012399AA: RNCC: 3 | RNVC: 2

12 Aug 2004

5340-14-332-1757
Access Cover

143321757
BAZ1909: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-512-0416
Access Cover

145120416
5708.87: RNCC: 3 | RNVC: 2
0005521: RNCC: 5 | RNVC: 2

3 Feb 1999

5340-14-313-7052
Access Cover

143137052
0064767250: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-367-5908
Access Cover

143675908
42605: RNCC: 3 | RNVC: 2
37356: RNCC: 5 | RNVC: 2

19 Jan 1981

5340-14-547-9751
Angle Bracket

145479751
RA1M701346109: RNCC: 3 | RNVC: 2

30 Nov 2005

5340-14-497-5840
Mounting Plate

144975840
1S6236: RNCC: 3 | RNVC: 2
F300 0T 023 3871: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-535-5059
Cover Strip

145355059
SZ10.250.878: RNCC: 3 | RNVC: 2
10-250-878: RNCC: 3 | RNVC: 2

31 May 2003

5340-14-529-3163
Lock Key

145293163
BN A71317: RNCC: 3 | RNVC: 2

20 Mar 2002

5340-14-443-1042
Cushioning Pad

144431042
DA1N203150540: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-14-535-4112
Mounting Bracket

145354112
5010480516: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-518-5591
Access Cover

145185591
5000743807: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-335-3136
Rod End Clevis

143353136
196393: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-436-4436
Rod End Clevis

144364436
8815103006: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-374-0350
Rod End Clevis

143740350
BAZ96690: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-202-5366
Loop Clamp

142025366
511131050052: RNCC: 3 | RNVC: 2
55G5: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-14-502-0377
Angle Bracket

145020377
K2072980: RNCC: 3 | RNVC: 2
72980: RNCC: 5 | RNVC: 2

26 Nov 1997

5340-14-543-7069
Plug Button

145437069
1814127: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-14-460-5818
Access Cover

144605818
1026991D00: RNCC: 3 | RNVC: 2

2 Feb 1993

5340-14-474-9319
Access Cover

144749319
20388413: RNCC: 3 | RNVC: 2

10 Mar 1995

5340-14-437-3650
Anchor Strap

144373650
05300502: RNCC: 3 | RNVC: 2
D05300502: RNCC: 5 | RNVC: 2
F300 0T 006 6627: RNCC: 6 | RNVC: 9

31 Jan 1990

5340-14-431-7572
Anchor Strap

144317572
39079780: RNCC: 3 | RNVC: 2
39079780: RNCC: 3 | RNVC: 9

10 May 1989

5340-14-305-7958
Access Cover

143057958
391C66513H1DET2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-524-5171
Access Cover

145245171
0120780046: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-325-8487
Loop Clamp

143258487
CAP10-90-21-12: RNCC: 3 | RNVC: 9

2 Jul 1975

5340-14-339-2952
Webbing Strap

143392952
GC23-5: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-541-1753
Mounting Plate

145411753
330A38-0100-39: RNCC: 3 | RNVC: 2

14 May 2004

5340-14-397-1659
Anchor Strap

143971659
S3978: RNCC: 3 | RNVC: 2

1 Dec 1984

5340-14-522-7365
Mounting Bracket

145227365
56644780AA: RNCC: 3 | RNVC: 2
56644780: RNCC: 5 | RNVC: 9

15 Nov 2000

5340-14-042-9100
Angle Bracket

140429100
A21A221260330: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-501-6492
Loop Clamp

145016492
45280065: RNCC: 3 | RNVC: 2
45280065: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-504-2459
Mounting Bracket

145042459
3596421M93: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-341-0869
Mending Plate

143410869
16411582: RNCC: 3 | RNVC: 2
16411582: RNCC: 3 | RNVC: 9

16 Mar 1977

5340-14-530-0392
Mounting Bracket

145300392
GA65926: RNCC: 3 | RNVC: 2

30 Apr 2002

5340-14-397-6293
Corner Brace

143976293
21829: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-366-3504
Surface Bolt

143663504
450PB1C1V293: RNCC: 3 | RNVC: 2
450BPBC1V01: RNCC: 5 | RNVC: 2
VER450PB1C1V293: RNCC: 5 | RNVC: 2

20 Nov 1980

5340-14-350-4543
Angle Bracket

143504543
207629: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-463-8727
Loop Clamp

144638727
166029: RNCC: 3 | RNVC: 2
89170140: RNCC: 5 | RNVC: 2

30 Jun 1993

5340-14-475-6217
Block Fairlead

144756217
B0240A: RNCC: 3 | RNVC: 2
SY240A: RNCC: 5 | RNVC: 2

20 Apr 1995

5340-14-548-1160
Mounting Bracket

145481160
RA1A701157161N1: RNCC: 3 | RNVC: 2

12 Dec 2005

5340-14-552-2341
Mounting Bracket

145522341
SZ18.705.510: RNCC: 3 | RNVC: 2

5 Dec 2006

5340-14-385-8936
Mending Plate

143858936
BAZ5241: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-341-6742
Retaining Strap

143416742
0013350277: RNCC: 3 | RNVC: 2
0013350277: RNCC: 5 | RNVC: 9

14 Apr 1977

5340-14-522-9792
Mounting Bracket

145229792
0319761460: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-14-552-0544
Mounting Bracket

145520544
0249921010: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-14-519-3734
Protection Bellows

145193734
7050A3671007: RNCC: 1 | RNVC: 2
BH104: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-432-7373
Loop Clamp

144327373
51113105063: RNCC: 3 | RNVC: 2
25G63: RNCC: 5 | RNVC: 2

21 Jun 1989

5340-14-495-9570
Mounting Plate

144959570
4282510310: RNCC: 3 | RNVC: 9
4282510310: RNCC: 5 | RNVC: 9
F300 0T 020 6054: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-403-9088
Strap End Clip

144039088
2000070-14-23: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-541-3569
Mounting Bracket

145413569
21169240-00-REP1: RNCC: 3 | RNVC: 2

3 Jun 2004

5340-14-285-2014
Mending Plate

142852014
A10-76-423-02-0: RNCC: 3 | RNVC: 2
A10-76-423-02-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-517-3656
Mounting Bracket

145173656
169-98-000-B: RNCC: 3 | RNVC: 2

8 Dec 1999

5340-14-467-9165
Angle Bracket

144679165
312-07901-001: RNCC: 3 | RNVC: 2

2 Feb 1994

5340-14-433-7770
Angle Bracket

144337770
365A53-2024-21: RNCC: 3 | RNVC: 2

9 Aug 1989

5340-14-441-7125
Loop Clamp

144417125
ASNA0021-25S51: RNCC: 3 | RNVC: 2
A0021-25S51: RNCC: 5 | RNVC: 2

12 Sep 1990

5340-14-420-5122
Butt Hinge

144205122
160G262135-07: RNCC: 3 | RNVC: 2

10 Dec 1987

5340-14-339-6519
Runner

143396519
3511 000 00022: RNCC: 3 | RNVC: 2
3511 000 00022: RNCC: 5 | RNVC: 2
3511-000-00022: RNCC: 5 | RNVC: 2

18 Jan 1977

5340-14-469-6828
Pipe Hanger

144696828
78733-020-032B: RNCC: 3 | RNVC: 2

4 May 1994

5340-14-533-6032
Rod End Clevis

145336032
708010S412-22A: RNCC: 3 | RNVC: 2

12 Feb 2003

5340-14-353-6269
Mortise Lock Set

143536269
15834-10U: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-402-0832
Plug Button

144020832
400575: RNCC: 3 | RNVC: 2
BGE400575: RNCC: 5 | RNVC: 2

26 Jun 1985

5340-14-372-6370
Webbing Strap

143726370
16173-41: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-410-6147
Access Cover

144106147
16592410: RNCC: 3 | RNVC: 2
16592410: RNCC: 5 | RNVC: 9

9 Jul 1986

5340-14-202-5359
Loop Clamp

142025359
45N8: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-454-8644
Access Cover

144548644
320995: RNCC: 3 | RNVC: 2
320995: RNCC: 5 | RNVC: 9

24 Apr 1992

5340-14-403-3668
Retaining Strap

144033668
162049: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-547-9753
Angle Bracket

145479753
RA1M701346303: RNCC: 3 | RNVC: 2

30 Nov 2005

5340-14-284-7200
Plug Button

142847200
32-387: RNCC: 3 | RNVC: 9

1 Jan 1972

5340-14-526-2494
Access Cover

145262494
10474410: RNCC: 3 | RNVC: 2

11 Jul 2001

Load More Results