What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 80 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 80 of 446

5340-14-540-9216
Snap Hook

145409216
DV098746: RNCC: 3 | RNVC: 2
662800: RNCC: 5 | RNVC: 9
GO100: RNCC: 5 | RNVC: 9

5 May 2004

5340-14-466-1810
Mounting Bracket

144661810
162205: RNCC: 3 | RNVC: 2
89169872: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-378-9951
Access Cover

143789951
16909639: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-232-0158
Loop Clamp

142320158
51211905039: RNCC: 3 | RNVC: 2
20P39: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-529-7766
Mounting Plate

145297766
8006676A02: RNCC: 3 | RNVC: 2

10 Apr 2002

5340-14-459-9197
Loop Clamp

144599197
NOR028423: RNCC: 3 | RNVC: 2

24 Dec 1992

5340-14-533-1567
Mounting Bracket

145331567
S261A1013102: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-14-475-9092
Handwheel

144759092
203210012: RNCC: 3 | RNVC: 2

10 May 1995

5340-14-436-9523
Bridge Clamp

144369523
9207692000: RNCC: 3 | RNVC: 2
9520010142: RNCC: 5 | RNVC: 2

10 Jan 1990

5340-14-568-3493
Utility Resilient Mount

145683493
A55660004: RNCC: 3 | RNVC: 9

25 May 2011

5340-14-546-9259
Bumper

145469259
066 0250 114 07: RNCC: 3 | RNVC: 2

8 Sep 2005

5340-14-351-2087
Access Cover

143512087
215791: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-527-4004
Access Cover

145274004
H77226: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-551-9002
Plug Button

145519002
7M223E: RNCC: 3 | RNVC: 2

7 Nov 2006

5340-14-392-5315
Loop Clamp

143925315
51314105028: RNCC: 3 | RNVC: 2
214102800: RNCC: 5 | RNVC: 2
21R28: RNCC: 5 | RNVC: 2

21 Mar 1984

5340-14-444-7786
Plug Button

144447786
C401201916: RNCC: 3 | RNVC: 2
U401201916: RNCC: 5 | RNVC: 2
U401201916: RNCC: 5 | RNVC: 2
C401201916: RNCC: 5 | RNVC: 2
F300 0T 005 9580: RNCC: 6 | RNVC: 9

21 Jan 1991

5340-14-515-1926
Mounting Bracket

145151926
10460734: RNCC: 3 | RNVC: 2
1O46O734: RNCC: 5 | RNVC: 2

13 Jul 1999

5340-14-369-4471
Rod End Clevis

143694471
CR0Q190MANMSR2: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-261-2192
Rod End Clevis

142612192
175-44-72: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-487-5312
Runner

144875312
RA1M287111411: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-385-4119
Angle Bracket

143854119
0285320040: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-517-4099
Fusible Plug

145174099
414970: RNCC: 3 | RNVC: 2
414970: RNCC: 5 | RNVC: 2

8 Dec 1999

5340-14-540-2939
Access Cover

145402939
46248861: RNCC: 3 | RNVC: 2

18 Mar 2004

5340-14-526-5175
Mounting Bracket

145265175
GA66896: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-460-0046
Access Cover

144600046
45726757: RNCC: 3 | RNVC: 2

7 Jan 1993

5340-14-453-6979
Control Rod

144536979
260973: RNCC: 3 | RNVC: 2

5 Mar 1992

5340-14-361-6759
Access Cover

143616759
18605693: RNCC: 3 | RNVC: 2
18605693: RNCC: 3 | RNVC: 9

20 Feb 1980

5340-14-416-2000
Retaining Strap

144162000
248815: RNCC: 3 | RNVC: 2
5172281100: RNCC: 3 | RNVC: 2
722811: RNCC: 5 | RNVC: 9

3 Jun 1987

5340-14-376-7559
Retaining Strap

143767559
0211410016: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-552-4211
Access Cover

145524211
MECA01089: RNCC: 3 | RNVC: 2

21 Dec 2006

5340-14-494-4767
Access Cover

144944767
T53 213 80: RNCC: 3 | RNVC: 2
F300 0T 017 3816: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-317-1878
Rod End Clevis

143171878
48321: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-494-9465
Access Cover

144949465
5448667: RNCC: 3 | RNVC: 2
F300 0T 018 1025: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-535-3825
Rod End Clevis

145353825
5010225908: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-484-1873
Access Cover

144841873
4326P: RNCC: 3 | RNVC: 9
91759301: RNCC: 5 | RNVC: 2
4326: RNCC: 5 | RNVC: 9

31 Oct 1996

5340-14-457-3923
Bumper

144573923
1039493D00: RNCC: 3 | RNVC: 2

1 Sep 1992

5340-14-370-5802
Angle Bracket

143705802
A11A232760002: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-353-0864
Anchor Strap

143530864
A465: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-517-6375
Runner

145176375
CRM280110424: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-522-4416
Access Cover

145224416
10612705: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-14-450-2139
Access Cover

144502139
5172054700: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-505-0868
Access Cover

145050868
01236800: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-394-8391
Access Cover

143948391
M4ZS331D1550B: RNCC: 3 | RNVC: 9

2 Oct 1984

5340-14-480-0321
Mounting Bracket

144800321
39527803: RNCC: 3 | RNVC: 2
39527803: RNCC: 5 | RNVC: 9

21 Feb 1996

5340-14-554-4876
Mounting Bracket

145544876
82384148000: RNCC: 3 | RNVC: 2

12 Jul 2007

5340-14-514-5778
Mounting Bracket

145145778
701937: RNCC: 3 | RNVC: 2

1 Jun 1999

5340-14-564-0262
Utility Resilient Mount

145640262
130-9376: RNCC: 3 | RNVC: 2

2 Apr 2010

5340-14-352-6265
Utility Access Door

143526265
N610716: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-437-0374
Loop Clamp

144370374
112APA: RNCC: 3 | RNVC: 2

16 Jan 1990

5340-14-378-0568
Anchor Strap

143780568
4136K8: RNCC: 3 | RNVC: 2

20 Jul 1982

5340-14-546-0146
Utility Access Door

145460146
200731: RNCC: 3 | RNVC: 2

6 Jun 2005

5340-14-527-6146
Loop Clamp

145276146
COU001552012101: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-14-534-8848
Mounting Bracket

145348848
02000113: RNCC: 3 | RNVC: 2

11 Apr 2003

5340-14-538-6400
Lock Bolt

145386400
NGM0010060100041: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-384-7796
Butt Hinge

143847796
16661841: RNCC: 3 | RNVC: 2
16661841: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-524-6496
Access Cover

145246496
15153559: RNCC: 3 | RNVC: 2

2 Apr 2001

5340-14-522-1153
Access Cover

145221153
8194893: RNCC: 3 | RNVC: 2
8194893: RNCC: 5 | RNVC: 2

4 Oct 2000

5340-14-466-2728
Access Cover

144662728
45084318: RNCC: 3 | RNVC: 2
45084318: RNCC: 3 | RNVC: 9

3 Nov 1993

5340-14-512-3397
Retaining Strap

145123397
10370556: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-14-369-7686
Angle Bracket

143697686
A11A211278021: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-549-6632
Mounting Plate

145496632
2237840260: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-14-500-4929
Mounting Plate

145004929
10097: RNCC: 3 | RNVC: 2
F300 0T 024 5100: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-410-9183
Loop Clamp Kit

144109183
210054: RNCC: 3 | RNVC: 2

23 Jul 1986

5340-14-464-3360
Retaining Strap

144643360
407309: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-438-7351
Mounting Plate

144387351
005056110019: RNCC: 3 | RNVC: 2
0049086: RNCC: 5 | RNVC: 2

3 Apr 1990

5340-14-371-1395
Rod End Clevis

143711395
4030727: RNCC: 3 | RNVC: 2
4030727: RNCC: 5 | RNVC: 9

5 Jun 1981

5340-14-503-9517
Bridge Clamp

145039517
1190700: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-14-425-2852
Angle Bracket

144252852
30329937N: RNCC: 3 | RNVC: 2

30 Jun 1988

5340-14-454-2261
Angle Bracket

144542261
4772202670: RNCC: 3 | RNVC: 2
5044873: RNCC: 5 | RNVC: 9

26 Mar 1992

5340-14-357-9286
Retaining Strap

143579286
217236: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-14-539-7685
Mounting Bracket

145397685
038074B: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-14-529-3056
Mounting Bracket

145293056
MB4568F00: RNCC: 3 | RNVC: 2

20 Mar 2002

5340-14-414-9645
Access Cover

144149645
227059: RNCC: 3 | RNVC: 2

26 Mar 1987

5340-14-509-1259
Access Cover

145091259
ER4040: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-549-6619
Mounting Bracket

145496619
2237839410: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-14-549-9738
Mounting Bracket

145499738
F1262496: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-366-5073
Control Rod

143665073
7552161180: RNCC: 3 | RNVC: 2
7902015160: RNCC: 3 | RNVC: 2
AY173-99: RNCC: 3 | RNVC: 2
75521611: RNCC: 5 | RNVC: 2
7552161180: RNCC: 5 | RNVC: 2

20 Nov 1980

5340-14-355-6764
Expansion Plug

143556764
E29584-18A: RNCC: 3 | RNVC: 2
00091200207: RNCC: 5 | RNVC: 2
BEX18-9B2: RNCC: 5 | RNVC: 2

19 Mar 1979

5340-14-465-2171
Access Cover

144652171
393702: RNCC: 3 | RNVC: 2
393702-001: RNCC: 5 | RNVC: 9

15 Sep 1993

5340-14-224-0193
Handwheel

142240193
GSM137-001F12DET3AVECBOULEAS10G: RNCC: 3 | RNVC: 2
GSM137-01F12DET3AVECB0ULEAS10G: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-520-6815
Access Cover

145206815
057E13-739059W: RNCC: 3 | RNVC: 2
0739059W00: RNCC: 5 | RNVC: 2

31 May 2000

5340-14-327-7858
Butt Hinge

143277858
6007-100GAUCHE: RNCC: 3 | RNVC: 2
GRILLELAMES0RDINAIRES100GAUCHE: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-485-5787
Access Cover

144855787
332A58-1800-1701: RNCC: 3 | RNVC: 2

29 Jan 1997

5340-14-401-1846
Access Cover

144011846
3009-6: RNCC: 3 | RNVC: 2
85-692-9364: RNCC: 6 | RNVC: 9

29 May 1985

5340-14-422-2638
Rod End Clevis

144222638
9457-46-01: RNCC: 3 | RNVC: 2

24 Feb 1988

5340-14-468-6144
Loop Clamp

144686144
SPV112A-PAIS-316L: RNCC: 3 | RNVC: 2
SPV112A-ULIS-316L: RNCC: 5 | RNVC: 2

9 Mar 1994

5340-14-472-7240
Angle Bracket

144727240
409082: RNCC: 3 | RNVC: 2
409082-002: RNCC: 5 | RNVC: 9

9 Nov 1994

5340-14-360-3342
Anchor Strap

143603342
5431-06: RNCC: 3 | RNVC: 2
NBC10AHE111: RNCC: 3 | RNVC: 2

23 Nov 1979

5340-14-396-2528
Access Cover

143962528
7199-203: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-549-8629
Bridge Clamp

145498629
2092430-001: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-432-1454
Bow Handle

144321454
3511-314-93301: RNCC: 3 | RNVC: 2
3511-314-93301: RNCC: 5 | RNVC: 9

24 May 1989

5340-14-364-0332
Retaining Strap

143640332
FJ1B705-152: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-403-6125
Rod End Clevis

144036125
304-042-801-0: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-549-9894
Retaining Strap

145499894
EA6M702-33-882: RNCC: 3 | RNVC: 2

22 May 2006

5340-14-531-8185
Pipe Hanger

145318185
341A61-5021-22: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-487-5567
Mounting Plate

144875567
78785-050A17F: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-278-3291
Pipe Hanger

142783291
160-11521-05: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-389-4601
Angle Bracket

143894601
365A57-3031-20: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-290-2171
Doorknob

142902171
330A22-2233-20: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-571-2493
Utility Resilient Mount

145712493
MP11-200: RNCC: 3 | RNVC: 2

6 Mar 2012

5340-14-301-8274
Loop Clamp

143018274
GSM183-001F22: RNCC: 3 | RNVC: 2
000MA052REP20: RNCC: 5 | RNVC: 2
GSM1078REP22: RNCC: 5 | RNVC: 2
GSM183-01F22: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-447-1387
Loop Clamp

144471387
355A61-5311-00: RNCC: 3 | RNVC: 2

3 May 1991

5340-14-438-8755
Mounting Plate

144388755
005062010034: RNCC: 3 | RNVC: 2
0049170: RNCC: 5 | RNVC: 2

10 Apr 1990

5340-14-551-5079
Angle Bracket

145515079
RA1M702846131: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-552-9641
Access Cover

145529641
716967: RNCC: 3 | RNVC: 2

19 Feb 2007

5340-14-530-5111
Support Hook

145305111
8033883Y00: RNCC: 3 | RNVC: 2

18 Jun 2002

5340-14-382-8590
Anchor Strap

143828590
23013981: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-450-4330
Access Cover

144504330
1087135: RNCC: 3 | RNVC: 2
1087135: RNCC: 5 | RNVC: 2

9 Oct 1991

5340-14-516-9571
Mounting Bracket

145169571
10312293: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-423-1703
Loop Clamp

144231703
1662A23: RNCC: 3 | RNVC: 2

6 Apr 1988

5340-14-442-1039
Mounting Bracket

144421039
410615: RNCC: 3 | RNVC: 2
BLB410615: RNCC: 5 | RNVC: 2

1 Oct 1990

5340-14-534-4810
Mounting Plate

145344810
RA1B701207151: RNCC: 3 | RNVC: 2

26 Mar 2003

5340-14-296-8137
Webbing Strap

142968137
204798: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-352-7275
Mending Plate

143527275
573899324: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-361-2305
Anchor Strap

143612305
5000131078: RNCC: 3 | RNVC: 2
5000131078: RNCC: 5 | RNVC: 9

24 Jan 1980

5340-14-413-2519
Rim Lock

144132519
4461683: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-380-1537
Anchor Strap

143801537
536490: RNCC: 3 | RNVC: 2
00536490: RNCC: 5 | RNVC: 2

8 Nov 1982

5340-14-392-6816
Anchor Strap

143926816
0823988400: RNCC: 3 | RNVC: 2
0823988400: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-14-416-0428
Access Cover

144160428
BJM00843: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-549-2990
Mounting Bracket

145492990
10666130001: RNCC: 3 | RNVC: 2

21 Mar 2006

5340-14-520-3310
Access Cover

145203310
3421214: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-517-6537
Swivel Caster

145176537
9455ADC104: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-555-6780
Angle Bracket

145556780
720949: RNCC: 3 | RNVC: 2

6 Dec 2007

5340-14-550-4677
Angle Bracket

145504677
RA1B701454111: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-516-3988
Plug Button

145163988
095706: RNCC: 3 | RNVC: 2
3245060957063: RNCC: 5 | RNVC: 2
95706: RNCC: 5 | RNVC: 2

22 Sep 1999

5340-14-545-7002
Mounting Bracket

145457002
RA1M703836151A3: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-518-1392
Access Cover

145181392
5000811206: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-506-7326
Mounting Bracket

145067326
10382640: RNCC: 3 | RNVC: 2

13 May 1998

5340-14-461-6053
Access Cover

144616053
40146467: RNCC: 3 | RNVC: 2

17 Mar 1993

5340-14-406-3341
Access Cover

144063341
79032874: RNCC: 3 | RNVC: 2
79032874: RNCC: 5 | RNVC: 9

8 Jan 1986

5340-14-331-3289
Access Cover

143313289
497309: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-442-3984
Access Cover

144423984
20859262: RNCC: 3 | RNVC: 2
20859262: RNCC: 3 | RNVC: 9

15 Oct 1990

5340-14-512-5641
Utility Access Door

145125641
S8576706: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-547-5861
Bumper

145475861
P1150010: RNCC: 3 | RNVC: 2

17 Oct 2005

5340-14-276-1133
Rod End Clevis

142761133
1MSS953: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-350-4339
Mending Plate

143504339
209498: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-384-7692
Access Cover

143847692
16761339: RNCC: 3 | RNVC: 2
16761339: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-275-1357
Access Cover

142751357
CR897: RNCC: 3 | RNVC: 2
03-742398: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-494-9440
Mounting Plate

144949440
9350162480: RNCC: 3 | RNVC: 2
5448633: RNCC: 5 | RNVC: 2
F300 0T 018 1000: RNCC: 6 | RNVC: 9
F300 0T 024 6207: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-477-4997
Retaining Strap

144774997
1180449: RNCC: 3 | RNVC: 2
1108771K00: RNCC: 5 | RNVC: 2
1180449: RNCC: 5 | RNVC: 2

7 Sep 1995

5340-14-508-0347
Butt Hinge

145080347
4773221630: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-547-9757
Angle Bracket

145479757
RA1M701346473: RNCC: 3 | RNVC: 2

30 Nov 2005

5340-14-547-9657
Mounting Bracket

145479657
RA1M701186160: RNCC: 3 | RNVC: 2

30 Nov 2005

5340-14-512-8121
Bow Handle

145128121
549701: RNCC: 3 | RNVC: 2
196953: RNCC: 5 | RNVC: 2

24 Feb 1999

5340-14-383-4378
Butt Hinge

143834378
20070623: RNCC: 3 | RNVC: 2
20070623: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-554-6034
Retaining Bail

145546034
0390710420: RNCC: 3 | RNVC: 2

24 Jul 2007

5340-14-530-6863
Cover Strip

145306863
T524A2001524: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-327-5412
Webbing Strap

143275412
001876050P: RNCC: 3 | RNVC: 2
9176: RNCC: 3 | RNVC: 2
9176: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-546-9678
Angle Bracket

145469678
RB1B701476741: RNCC: 3 | RNVC: 2

12 Sep 2005

5340-14-352-6994
Angle Bracket

143526994
26258811: RNCC: 3 | RNVC: 2
26258811: RNCC: 3 | RNVC: 9

14 Nov 1978

5340-14-352-7225
Mending Plate

143527225
573898197: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-488-2547
Mounting Bracket

144882547
0320167030: RNCC: 3 | RNVC: 2

23 Apr 1997

5340-14-485-9656
Angle Bracket

144859656
1035078T00: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-500-8232
Section Block Clamp

145008232
E64009998102: RNCC: 3 | RNVC: 2
F300 0T 024 8434: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-492-5465
Corner Brace

144925465
5000920912: RNCC: 3 | RNVC: 2
F300 0T 007 9392: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-515-6314
Mounting Plate

145156314
5Q6461: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-439-1783
Webbing Strap

144391783
121F1M37: RNCC: 3 | RNVC: 2
91613520: RNCC: 5 | RNVC: 2

25 Apr 1990

5340-14-506-9411
Butt Hinge

145069411
10418208: RNCC: 3 | RNVC: 2

27 May 1998

5340-14-450-8894
Mounting Plate

144508894
PM1A584210127: RNCC: 3 | RNVC: 2
PM1A584210127: RNCC: 5 | RNVC: 2

23 Oct 1991

5340-14-448-9560
Mounting Bracket

144489560
27110228-4: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-14-454-5079
Mounting Plate

144545079
16170599: RNCC: 3 | RNVC: 2

2 Apr 1992

5340-14-500-3325
Padlock Eye

145003325
E61303000001: RNCC: 3 | RNVC: 2
F300 0T 024 3414: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-371-6009
Loop Clamp

143716009
511119050281: RNCC: 3 | RNVC: 2
35P28: RNCC: 5 | RNVC: 2

5 Aug 1981

5340-14-372-1852
Padlock

143721852
42289: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-371-6340
Quick Release Pin

143716340
MBEU61342: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-370-2407
Pipe Hanger

143702407
303-991-002-0: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-486-2490
Mounting Plate

144862490
282-1-B-114: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-531-2176
Mounting Bracket

145312176
341A65-5065-00: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-399-3371
Angle Bracket

143993371
27-0375F: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-536-9772
Metal Grille

145369772
6755-21: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-542-1240
Mounting Plate

145421240
5302835-046-01-A: RNCC: 3 | RNVC: 2
5302835-046-01A: RNCC: 5 | RNVC: 2

7 Jul 2004

5340-14-449-5146
Mounting Plate

144495146
A10-56-412-03-0: RNCC: 3 | RNVC: 2
A10-56-412-03-0: RNCC: 5 | RNVC: 2
85-694-3905: RNCC: 6 | RNVC: 9

21 Aug 1991

5340-14-378-8506
Mending Plate

143788506
341A25-1000-67: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-455-3693
Clamping Catch

144553693
28-03547: RNCC: 3 | RNVC: 2
11580001: RNCC: 5 | RNVC: 2
5000814024: RNCC: 5 | RNVC: 2

21 May 1992

5340-14-285-0505
Access Cover

142850505
E4M110-45-01: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-505-6235
Loop Clamp

145056235
S55-15SKZ: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-335-9006
Access Cover

143359006
191926: RNCC: 3 | RNVC: 2
20-0505: RNCC: 5 | RNVC: 2

24 Jul 1976

5340-14-217-0671
Angle Bracket

142170671
201756-1B: RNCC: 3 | RNVC: 2
70014195: RNCC: 3 | RNVC: 2
201756-1B: RNCC: 5 | RNVC: 9
70014195: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-377-1181
Mending Plate

143771181
23811-292-000: RNCC: 3 | RNVC: 2
23811-292-000: RNCC: 5 | RNVC: 2

17 May 1982

5340-14-412-2211
Angle Bracket

144122211
332A32-2347-00: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-549-1695
Access Cover

145491695
3322-327E601: RNCC: 3 | RNVC: 2

7 Mar 2006

5340-14-489-6544
Angle Bracket

144896544
332A33-0055-21: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-272-4207
Butt Hinge

142724207
P26-406-220X80S0UDEEPICARDEDR0I-: RNCC: 4 | RNVC: 1

1 Jan 1971

5340-14-337-6468
Anchor Strap

143376468
NO PRIMARY REF14-337-6468: RNCC: 3 | RNVC: 2
056096805: RNCC: 5 | RNVC: 9
7056096805: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-14-260-0750
Mounting Bracket

142600750
321A62-1307-00: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-256-4331
Retaining Strap

142564331
NO PRIMARY REF14-256-4331: RNCC: 3 | RNVC: 2
894-4: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-502-9967
Lock Spindle

145029967
330A22-2444-20: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-536-8758
Utility Access Door

145368758
16-2000-02: RNCC: 3 | RNVC: 2

17 Sep 2003

5340-14-397-0827
Flush Lock

143970827
8628-06: RNCC: 3 | RNVC: 2
N6770300400: RNCC: 5 | RNVC: 2

1 Dec 1984

5340-14-337-4350
Handwheel

143374350
1901045: RNCC: 3 | RNVC: 2
01045: RNCC: 5 | RNVC: 9
1 11 01045 XX: RNCC: 5 | RNVC: 9
2 11 01045 XX: RNCC: 5 | RNVC: 9
0024-42-407-2002: RNCC: 6 | RNVC: 9

7 Oct 1976

5340-14-517-0426
Pipe Hanger

145170426
309-098-401-0: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-261-4898
Detent Plunger

142614898
905-05: RNCC: 3 | RNVC: 9

1 Jan 1970

5340-14-284-6832
Mounting Plate

142846832
B07GA0101-025: RNCC: 3 | RNVC: 2
B07GA0101-025: RNCC: 5 | RNVC: 2
B07GA0101-025: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-370-7682
Runner

143707682
87201-478MM: RNCC: 3 | RNVC: 2
CAL15753: RNCC: 5 | RNVC: 2

5 Jun 1981

5340-14-364-0882
Retaining Strap

143640882
501-804-682-0: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-500-3741
Mounting Plate

145003741
456-10498-800: RNCC: 3 | RNVC: 2
F300 0T 024 3841: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-435-0693
Retaining Strap

144350693
853-200-921-0: RNCC: 3 | RNVC: 2

18 Oct 1989

5340-14-555-4166
Loop Clamp

145554166
78651RH5CF: RNCC: 1 | RNVC: 2
78651RH5CF: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-14-545-2670
Mounting Bracket

145452670
T947A2001102: RNCC: 3 | RNVC: 2

30 Mar 2005

5340-14-381-4001
Angle Bracket

143814001
230272: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-551-5074
Angle Bracket

145515074
RA1M122111121N1: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-279-2349
Webbing Strap

142792349
31078: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-549-6613
Mounting Bracket

145496613
2715047980: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-14-370-6589
Clamping Catch

143706589
AA301: RNCC: 3 | RNVC: 9

5 Jun 1981

5340-14-444-7007
Runner

144447007
39534039: RNCC: 3 | RNVC: 2
39534039: RNCC: 5 | RNVC: 9

16 Jan 1991

5340-14-516-4195
Metal Grille

145164195
803524130610: RNCC: 3 | RNVC: 2
SDM803524130610: RNCC: 5 | RNVC: 9

22 Sep 1999

5340-14-483-2426
Hook Handle

144832426
0851946F00: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-14-551-4220
Angle Bracket

145514220
RA1A701752231N1: RNCC: 3 | RNVC: 2

20 Sep 2006

5340-14-511-1449
Compression Cup

145111449
VK5008L: RNCC: 3 | RNVC: 2

4 Dec 1998

5340-14-254-4986
Retaining Band

142544986
0000467162: RNCC: 3 | RNVC: 2
0000467162: RNCC: 5 | RNVC: 9
467162: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-449-9580
Detent Plunger

144499580
215384: RNCC: 3 | RNVC: 2

18 Sep 1991

5340-14-304-2580
Rim Lock

143042580
TH20B22: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-359-7129
Retaining Strap

143597129
125408: RNCC: 3 | RNVC: 2

15 Oct 1979

5340-14-270-8592
Expansion Plug

142708592
152615: RNCC: 3 | RNVC: 2
152615: RNCC: 6 | RNVC: 9

1 Jan 1970

5340-14-548-7283
Mounting Bracket

145487283
072944987000019: RNCC: 3 | RNVC: 2

2 Feb 2006

5340-14-389-9257
Bail Handle

143899257
005397228P: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-471-9469
Shelf Bracket

144719469
38225066: RNCC: 3 | RNVC: 2
38225066: RNCC: 5 | RNVC: 9

28 Sep 1994

5340-14-466-1735
Retaining Strap

144661735
166007: RNCC: 3 | RNVC: 2
89170118: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-539-5477
Cover Strip

145395477
SZ09.251.163: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-438-7237
Access Cover

144387237
29504885: RNCC: 3 | RNVC: 2

2 Apr 1990

5340-14-393-9009
Access Cover

143939009
85440: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-540-8774
Mounting Plate

145408774
PIDT0X691: RNCC: 3 | RNVC: 2

29 Apr 2004

5340-14-414-9314
Compression Cup

144149314
226074: RNCC: 3 | RNVC: 2

25 Mar 1987

5340-14-518-1673
Mounting Bracket

145181673
5010093637: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-544-2862
Mounting Bracket

145442862
S931A1110100: RNCC: 3 | RNVC: 2

17 Jan 2005

5340-14-270-8328
Strap Hinge

142708328
10-14: RNCC: 3 | RNVC: 2
4CH58ZB: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-412-5125
Loop Clamp

144125125
31836: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-14-341-0260
Mending Plate

143410260
911423: RNCC: 3 | RNVC: 2
911423: RNCC: 5 | RNVC: 9

16 Mar 1977

5340-14-525-4946
Stand Base

145254946
47217933: RNCC: 3 | RNVC: 2
47217933: RNCC: 5 | RNVC: 2

6 Jun 2001

5340-14-522-8904
Bumper

145228904
96191282: RNCC: 3 | RNVC: 2
8015968B00: RNCC: 5 | RNVC: 2
96191282: RNCC: 5 | RNVC: 9

6 Dec 2000

5340-14-518-0546
Mounting Bracket

145180546
5010054840: RNCC: 3 | RNVC: 2

25 Jan 2000

5340-14-533-6935
Mounting Plate

145336935
D109623: RNCC: 3 | RNVC: 2

19 Feb 2003

5340-14-388-1933
Runner

143881933
PGC220: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-457-7424
Mounting Bracket

144577424
71353: RNCC: 3 | RNVC: 2

17 Sep 1992

5340-14-040-6407
Tubular Fairlead

140406407
190A122: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-534-7868
Runner

145347868
712897: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-14-485-6198
Mounting Bracket

144856198
3BM01270AAAA: RNCC: 3 | RNVC: 2
3BM01270AAAA: RNCC: 5 | RNVC: 9

6 Feb 1997

5340-14-474-2985
Mounting Bracket

144742985
45087231: RNCC: 3 | RNVC: 2

8 Feb 1995

5340-14-420-3733
Loop Clamp

144203733
15151998: RNCC: 3 | RNVC: 2

7 Dec 1987

5340-14-489-8703
Webbing Strap

144898703
TENDE00005: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-14-332-9402
Retaining Strap

143329402
193386: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-528-4237
Loop Clamp

145284237
SP108ALIS: RNCC: 3 | RNVC: 2

29 Jan 2002

5340-14-549-8464
Angle Bracket

145498464
2092786: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-379-6289
Compression Cup

143796289
16006104: RNCC: 3 | RNVC: 2
16006104: RNCC: 5 | RNVC: 9

20 Oct 1982

5340-14-538-7723
Handwheel

145387723
NGM0011040318259: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-488-2476
Leakproof Seal Plug

144882476
R43601REP5: RNCC: 3 | RNVC: 2

23 Apr 1997

5340-14-430-2830
Mounting Bracket

144302830
39229156: RNCC: 3 | RNVC: 2
39229156: RNCC: 5 | RNVC: 9

15 Mar 1989

5340-14-360-7528
Mounting Plate

143607528
0000729787: RNCC: 3 | RNVC: 2
0000729787: RNCC: 5 | RNVC: 9
729787: RNCC: 5 | RNVC: 9

19 Dec 1979

5340-14-528-5410
Webbing Strap

145285410
13421: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-358-5501
Retaining Strap

143585501
386438: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-238-9629
Loop Clamp

142389629
118074: RNCC: 3 | RNVC: 9
062118074: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-381-5507
Mounting Plate

143815507
398002050001: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-416-5862
Mounting Plate

144165862
29778573: RNCC: 3 | RNVC: 9

19 Jun 1987

5340-14-359-2057
Loop Clamp

143592057
6520160: RNCC: 3 | RNVC: 2

2 Oct 1979

5340-14-527-6145
Mounting Bracket

145276145
COU001552012021: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-14-507-3568
Bail Handle

145073568
ACA0042: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-14-497-3253
Mounting Plate

144973253
M496-500103: RNCC: 3 | RNVC: 2
F300 0T 023 0116: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-353-5593
Bumper

143535593
84111-367-690: RNCC: 3 | RNVC: 2
84111-367-690: RNCC: 5 | RNVC: 2

16 Jan 1979

5340-14-247-3394
Rod End Clevis

142473394
321A57-0414-20: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-316-2076
Retaining Strap

143162076
F700-041: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-472-8659
Cover Strip

144728659
332A21-1030-AH: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-372-5481
Bumper

143725481
M9647-1450KG: RNCC: 3 | RNVC: 9

1 Sep 1981

5340-14-306-4026
Anchor Strap

143064026
F700-026: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-464-8929
Mounting Bracket

144648929
312-01421-001: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-473-3927
Angle Bracket

144733927
332A41-4105-21: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-501-3121
Mounting Plate

145013121
851-008: RNCC: 3 | RNVC: 2
851.008: RNCC: 3 | RNVC: 2
F300 0T 025 3530: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-340-3436
Access Cover

143403436
M3C707-47-02: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-261-0816
Rod End Clevis

142610816
175-17-218: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-438-9429
Angle Bracket

144389429
70246248: RNCC: 3 | RNVC: 2
70246248: RNCC: 5 | RNVC: 9
85-693-8237: RNCC: 6 | RNVC: 9

11 Apr 1990

5340-14-406-6765
Loop Clamp

144066765
7530-20507: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-460-7716
Bridge Clamp

144607716
TB30-53054-000: RNCC: 3 | RNVC: 2
TB30-53054-000: RNCC: 5 | RNVC: 2

9 Feb 1993

5340-14-384-3170
Loop Clamp

143843170
28GE15: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-465-0223
Runner

144650223
MB1609F01: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-506-8651
Lock Key

145068651
MCHA140VC: RNCC: 3 | RNVC: 2

27 May 1998

5340-14-459-7758
Angle Bracket

144597758
461-11299-000: RNCC: 3 | RNVC: 2

17 Dec 1992

5340-14-366-4988
Friction Catch

143664988
525314: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-504-9532
Mounting Plate

145049532
50295400: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-438-5101
Retaining Band

144385101
DA2C351005001: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-460-0763
Rod End Connector

144600763
PM1A725374411: RNCC: 3 | RNVC: 2
PM1A725374411: RNCC: 5 | RNVC: 2

7 Jan 1993

5340-14-479-5716
Angle Bracket

144795716
23221759-4: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-14-350-5160
Retaining Strap

143505160
5172: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-539-6499
Loop Clamp

145396499
21231186-00: RNCC: 3 | RNVC: 2
21231186-9: RNCC: 5 | RNVC: 2

28 Jan 2004

5340-14-423-9164
Access Cover

144239164
865-83-010: RNCC: 3 | RNVC: 2
1555535: RNCC: 5 | RNVC: 2

5 May 1988

5340-14-286-4239
Buckle

142864239
32138-016: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-516-5713
Mounting Bracket

145165713
341A76-1565-00: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-14-426-6747
Access Cover

144266747
23030165040/04: RNCC: 3 | RNVC: 2
89406702: RNCC: 5 | RNVC: 2

15 Sep 1988

5340-14-302-0104
Angle Bracket

143020104
A10-19-415-65-0: RNCC: 3 | RNVC: 2
A10-19-415-65-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-469-3776
Retaining Clip

144693776
9361-05: RNCC: 3 | RNVC: 2
7920031483: RNCC: 5 | RNVC: 2

20 Apr 1994

5340-14-550-4853
Pipe Hanger

145504853
RA1A702446029: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-508-0338
Mounting Bracket

145080338
4773202630: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-548-4881
Mounting Bracket

145484881
5000723742: RNCC: 3 | RNVC: 2

23 Jan 2006

5340-14-413-9754
Retaining Strap

144139754
ST406M52P717: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-480-0117
Angle Bracket

144800117
1976115: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-507-6874
Blank Panel

145076874
10473983: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-539-9965
Angle Bracket

145399965
RA1A703749325N1: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-546-5852
Mounting Bracket

145465852
RA1A705646021: RNCC: 3 | RNVC: 2

20 Jul 2005

5340-14-436-7001
Cover Strip

144367001
DA5C121008481U1: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-539-7529
Cover Strip

145397529
SZ09.251.158: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-14-427-0714
Mounting Plate

144270714
A30031460: RNCC: 3 | RNVC: 2
89416105: RNCC: 5 | RNVC: 2

6 Oct 1988

5340-14-360-6970
Angle Bracket

143606970
83800: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-554-8127
Clamping Catch

145548127
1SH41852854: RNCC: 3 | RNVC: 2

28 Aug 2007

5340-14-546-1977
Mounting Bracket

145461977
900203000033: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-222-1393
Snap Hook

142221393
2501-28-34122: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-353-1286
Angle Bracket

143531286
16448517: RNCC: 3 | RNVC: 2
16448517: RNCC: 3 | RNVC: 9

8 Dec 1978

5340-14-521-1258
Cushioning Pad

145211258
5000703306: RNCC: 3 | RNVC: 2

11 Jul 2000

5340-14-381-3302
Mending Plate

143813302
573905980: RNCC: 3 | RNVC: 2
573905980: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-456-7868
Mounting Bracket

144567868
GA59178: RNCC: 3 | RNVC: 2
GA59178: RNCC: 5 | RNVC: 2

24 Jul 1992

5340-14-445-4318
Case Leg

144454318
10603024: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-466-1829
Mounting Bracket

144661829
166156: RNCC: 3 | RNVC: 2
89170208: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-445-3868
Bumper

144453868
BLC238198: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-14-449-7320
Mounting Bracket

144497320
45593865: RNCC: 3 | RNVC: 2
45593865: RNCC: 5 | RNVC: 9

4 Sep 1991

5340-14-479-6808
Mounting Plate

144796808
11095D730102: RNCC: 3 | RNVC: 2

31 Jan 1996

5340-14-520-6013
Mounting Bracket

145206013
39067718: RNCC: 3 | RNVC: 2

24 May 2000

5340-14-228-7893
Retaining Strap

142287893
707854: RNCC: 3 | RNVC: 9
062076718: RNCC: 5 | RNVC: 9
76718: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-269-5056
Retaining Band

142695056
358662: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-542-2593
Mounting Bracket

145422593
602015608: RNCC: 3 | RNVC: 2
602015608: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-425-6077
Mending Plate

144256077
413109000001: RNCC: 3 | RNVC: 2

12 Jul 1988

5340-14-430-3088
Mounting Bracket

144303088
104444: RNCC: 3 | RNVC: 2
104444: RNCC: 5 | RNVC: 2

15 Mar 1989

5340-14-384-2957
Runner

143842957
CR0Q1BECNC0QUEREPE: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-537-4656
Angle Bracket

145374656
RA1B703126137: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-550-4676
Angle Bracket

145504676
RA1B701360011N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-212-9648
Mending Plate

142129648
725289: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-472-3836
Arched Cushion

144723836
PM1A729009167: RNCC: 3 | RNVC: 2
PM1A729009167: RNCC: 5 | RNVC: 2

19 Oct 1994

5340-14-360-6956
Snap Hook

143606956
141795201: RNCC: 3 | RNVC: 2
141795201: RNCC: 5 | RNVC: 2

19 Dec 1979

5340-14-553-1619
Mounting Bracket

145531619
0249862250: RNCC: 3 | RNVC: 2

8 Mar 2007

5340-14-518-2014
Runner

145182014
434424: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-553-0537
Angle Bracket

145530537
RA1M701242051A1: RNCC: 3 | RNVC: 2

27 Feb 2007

5340-14-368-3578
Retaining Strap

143683578
404306800: RNCC: 3 | RNVC: 9
404306800: RNCC: 5 | RNVC: 9

20 Feb 1981

5340-14-470-3216
Runner

144703216
PS4545: RNCC: 3 | RNVC: 2
PS4545: RNCC: 3 | RNVC: 2
91748157: RNCC: 5 | RNVC: 2

15 Jun 1994

5340-14-549-9795
Mounting Bracket

145499795
1091281: RNCC: 3 | RNVC: 2

22 May 2006

5340-14-460-8287
Angle Bracket

144608287
7413-90: RNCC: 3 | RNVC: 2
9253370180: RNCC: 5 | RNVC: 2

10 Feb 1993

5340-14-526-3294
Mounting Bracket

145263294
010172035P: RNCC: 3 | RNVC: 2

20 Jul 2001

5340-14-471-2156
Rim Lock Set

144712156
5316CCGT: RNCC: 3 | RNVC: 2

4 Aug 1994

5340-14-497-5160
Mounting Plate

144975160
D062660010: RNCC: 3 | RNVC: 2
F300 0T 023 2937: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-205-8910
Rod End Clevis

142058910
253-5M312P39A: RNCC: 3 | RNVC: 9
PA253-5M312P39A: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-373-1046
Loop Clamp

143731046
51313105018: RNCC: 3 | RNVC: 2
A0021-21G18: RNCC: 5 | RNVC: 2
21G18: RNCC: 5 | RNVC: 2
18912250-2: RNCC: 5 | RNVC: 2
ASNA0021-21G18: RNCC: 5 | RNVC: 2

21 Sep 1981

5340-14-393-8131
Loop Clamp

143938131
51300005019: RNCC: 3 | RNVC: 2
11N19: RNCC: 5 | RNVC: 2
A0021-11N19: RNCC: 5 | RNVC: 2

23 Jun 1984

5340-14-361-9241
Anchor Strap

143619241
501-990-174-0: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-511-2587
Synchro Clamp

145112587
241965: RNCC: 3 | RNVC: 2
241965-001: RNCC: 5 | RNVC: 9

9 Dec 1998

5340-14-302-1527
Mending Plate

143021527
A10-23-580-53-0: RNCC: 3 | RNVC: 2
A10-23-580-53-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-454-0578
Access Cover

144540578
16297166: RNCC: 1 | RNVC: 2
044A86-220000-0000: RNCC: 3 | RNVC: 2
0905397M00: RNCC: 5 | RNVC: 2
16297166: RNCC: 5 | RNVC: 9

19 Mar 1992

5340-14-529-5563
Mounting Plate

145295563
330A61-1414-01: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-529-3518
Access Cover

145293518
457-12935-000: RNCC: 3 | RNVC: 2

22 Mar 2002

5340-14-489-4634
Retaining Strap

144894634
11521-027: RNCC: 3 | RNVC: 2

23 Jul 1997

5340-14-345-2725
Retaining Strap

143452725
FF1A703-50-01: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-340-3396
Pipe Hanger

143403396
M3C705-180: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-536-9852
Mounting Plate

145369852
8042-02: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-345-5398
Loop Clamp

143455398
55218-320-31B6ADL: RNCC: 3 | RNVC: 2
55218-320B316ADL: RNCC: 5 | RNVC: 2
85-800-6314: RNCC: 6 | RNVC: 9

5 Oct 1977

5340-14-368-4006
Rod End Clevis

143684006
262-50-61339-05: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-14-482-5188
Access Cover

144825188
CCN301-420-414A2: RNCC: 3 | RNVC: 2

11 Jul 1996

5340-14-412-5967
Rod End Clevis

144125967
853-201-935-0: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-14-379-1597
Filler Opening Cap

143791597
7704000005: RNCC: 3 | RNVC: 2
03205-002: RNCC: 3 | RNVC: 2
03205002: RNCC: 5 | RNVC: 2
3205-02: RNCC: 5 | RNVC: 2
644691: RNCC: 5 | RNVC: 2

6 Sep 1982

5340-14-413-1216
Access Cover

144131216
8872-22068: RNCC: 3 | RNVC: 2
887222068: RNCC: 5 | RNVC: 9

26 Nov 1986

5340-14-276-2742
Rod End Clevis

142762742
160-43235-01: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-325-3809
Control Rod

143253809
GSM173-018F39: RNCC: 3 | RNVC: 2
GSM173-18F39: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-521-0602
Mounting Plate

145210602
13-462-400: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-14-412-8659
Webbing Strap

144128659
ST406M75A17-12: RNCC: 3 | RNVC: 2

5 Nov 1986

5340-14-435-9586
Mounting Bracket

144359586
332A21-1970-20: RNCC: 3 | RNVC: 2

29 Nov 1989

5340-14-539-4600
Mounting Plate

145394600
365AMR-0680-20: RNCC: 3 | RNVC: 2

14 Jan 2004

5340-14-445-3175
Access Cover

144453175
NO PRIMARY REF14-445-3175: RNCC: 3 | RNVC: 2
3160181: RNCC: 5 | RNVC: 9
3160181: RNCC: 5 | RNVC: 9
F300 0T 003 0289: RNCC: 6 | RNVC: 9

11 Feb 1991

5340-14-397-2969
Loop Clamp

143972969
90465-08028: RNCC: 3 | RNVC: 2

1 Dec 1984

5340-14-276-2844
Loop Clamp

142762844
160-78842-02: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-549-6140
Mounting Bracket

145496140
CC201-615210-00: RNCC: 3 | RNVC: 2

21 Apr 2006

5340-14-482-9314
Pipe Hanger

144829314
78732-050-038: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-382-5610
Corner Brace

143825610
NO PRIMARY REF14-382-5610: RNCC: 3 | RNVC: 2
16932160: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-343-6480
Casement Fastener

143436480
1174: RNCC: 3 | RNVC: 2
91394171: RNCC: 5 | RNVC: 2

13 Jul 1977

5340-14-472-8837
Butt Hinge

144728837
332A58-2000-21: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-351-1261
Retaining Strap

143511261
210997: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-552-8844
Mounting Plate

145528844
82038927000: RNCC: 3 | RNVC: 2

10 Feb 2007

5340-14-419-6662
Swivel Caster

144196662
HP6BA125-23R: RNCC: 3 | RNVC: 2

30 Oct 1987

5340-14-409-9443
Angle Bracket

144099443
2527-19: RNCC: 3 | RNVC: 9
7910024149: RNCC: 5 | RNVC: 9

4 Jun 1986

5340-14-449-2496
Anchor Strap

144492496
NO PRIMARY REF14-449-2496: RNCC: 3 | RNVC: 2
637520: RNCC: 5 | RNVC: 2

7 Aug 1991

5340-14-342-5469
Access Cover

143425469
055W01-537217P: RNCC: 3 | RNVC: 2
0537217P00: RNCC: 5 | RNVC: 2

16 May 1977

5340-14-377-5688
Access Cover

143775688
325434: RNCC: 3 | RNVC: 2
325434: RNCC: 5 | RNVC: 9

10 Jun 1982

5340-14-399-9692
Anchor Strap

143999692
230661: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-543-5574
Access Cover

145435574
10605302: RNCC: 3 | RNVC: 2

21 Nov 2004

5340-14-372-8522
Access Cover

143728522
19306470: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-370-7264
Access Cover

143707264
210040: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-551-1396
Access Cover

145511396
MC2202F01: RNCC: 3 | RNVC: 2

29 Aug 2006

5340-14-338-7745
Anchor Strap

143387745
16367: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-503-0950
Plug Button

145030950
EMBPLAST40N: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-497-4143
Utility Access Door

144974143
1031200: RNCC: 3 | RNVC: 2
1031200: RNCC: 5 | RNVC: 2
F300 0T 023 1439: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-453-4033
Mounting Bracket

144534033
D54531: RNCC: 3 | RNVC: 2
D54531: RNCC: 5 | RNVC: 2

19 Feb 1992

5340-14-206-2533
Loop Clamp

142062533
0WF18577: RNCC: 3 | RNVC: 2
MT6GN: RNCC: 5 | RNVC: 9
MT6GN: RNCC: 5 | RNVC: 9
MT6GNB2: RNCC: 5 | RNVC: 9
MT6GN: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-454-1057
Mounting Bracket

144541057
16662232: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-520-9986
Mounting Plate

145209986
68706-1: RNCC: 3 | RNVC: 2

28 Jun 2000

5340-14-256-7213
Locking Stay

142567213
62179523: RNCC: 3 | RNVC: 9
062179523: RNCC: 5 | RNVC: 9
179523: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-460-9921
Anchor Strap

144609921
5000917109: RNCC: 3 | RNVC: 2

17 Feb 1993

5340-14-275-4856
Anchor Strap

142754856
70483412: RNCC: 3 | RNVC: 2
483412: RNCC: 5 | RNVC: 9
70483412: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-461-1486
Mounting Plate

144611486
20711021: RNCC: 3 | RNVC: 2

24 Feb 1993

5340-14-351-9738
Webbing Strap

143519738
PS: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-435-2398
Rod End Clevis

144352398
STEL15321: RNCC: 3 | RNVC: 2
15321: RNCC: 5 | RNVC: 2

31 Oct 1989

5340-14-031-7857
Rim Lock Set

140317857
CSEER0NISHTAI4ZL: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-330-0516
Rod End Clevis

143300516
79046433: RNCC: 3 | RNVC: 2
79046433: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-250-3753
Access Cover

142503753
709509: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-393-0125
Clamping Catch

143930125
TL100AXE8L: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-14-520-8822
Mounting Plate

145208822
BRIDE01804X00: RNCC: 3 | RNVC: 2

21 Jun 2000

5340-14-405-5491
Access Cover

144055491
0035354166: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-385-8194
Anchor Strap

143858194
100-177: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-334-5634
Bail Handle

143345634
PR303CB: RNCC: 3 | RNVC: 2
0215776Q00: RNCC: 5 | RNVC: 2

1 Jun 1976

5340-14-485-9675
Access Cover

144859675
1044510E00: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-409-0738
Anchor Strap

144090738
4771602370: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-397-9143
Access Cover

143979143
475089B: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-043-1366
Rod End Clevis

140431366
065R52-730814X: RNCC: 3 | RNVC: 2

10 Apr 1984

5340-14-545-6983
Mounting Bracket

145456983
RA1A703516111N1: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-206-9170
Loop Clamp

142069170
511131050031: RNCC: 3 | RNVC: 2
35G3: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-483-5772
Section Block Clamp

144835772
P109347D: RNCC: 3 | RNVC: 2

19 Sep 1996

5340-14-494-5032
Runner

144945032
3211031800: RNCC: 3 | RNVC: 2
F300 0T 017 4094: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-434-9950
Hand Crank Arm

144349950
M4Z6021935401: RNCC: 3 | RNVC: 2

11 Oct 1989

5340-14-463-7276
Angle Bracket

144637276
161164: RNCC: 3 | RNVC: 2
89169762: RNCC: 5 | RNVC: 2

23 Jun 1993

5340-14-518-1103
Angle Bracket

145181103
5000556904: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-547-6779
Mounting Plate

145476779
085519K: RNCC: 3 | RNVC: 2

26 Oct 2005

5340-14-547-5314
Angle Bracket

145475314
RA1M704516841A1: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-530-7869
Mounting Plate

145307869
S781A1011203: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-520-3562
Mounting Bracket

145203562
1070015: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-537-8464
Loop Clamp

145378464
EN2901P20W: RNCC: 2 | RNVC: 2

28 Nov 2003

5340-14-306-2813
Clamping Catch

143062813
NO PRIMARY REF14-306-2813: RNCC: 3 | RNVC: 2
SA60GACHETACIERR0ULE: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-386-3138
Surface Bolt

143863138
911302-38: RNCC: 3 | RNVC: 2
91130238: RNCC: 5 | RNVC: 2

24 Aug 1983

5340-14-456-7121
Loop Clamp

144567121
303-088-001-0: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-14-504-6528
Mounting Bracket

145046528
LS06-006-05: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-14-201-9855
Strapping

142019855
NO PRIMARY REF14-201-9855: RNCC: 3 | RNVC: 2
FEUILLARD3: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-14-369-1265
Angle Bracket

143691265
121S76-320-04-0: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-473-6483
Angle Bracket

144736483
332A22-1939-20: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-539-7381
Access Cover

145397381
21428722-00: RNCC: 3 | RNVC: 2
21428722-7: RNCC: 5 | RNVC: 2

5 Feb 2004

5340-14-412-2213
Angle Bracket

144122213
332A32-2375-20: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-546-2006
Mounting Plate

145462006
480080S150-01A: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-367-6018
Mounting Plate

143676018
NO PRIMARY REF14-367-6018: RNCC: 3 | RNVC: 2
D10-38007: RNCC: 5 | RNVC: 9

19 Jan 1981

5340-14-500-6230
Loop Clamp

145006230
RSGU1-40/15-W5: RNCC: 3 | RNVC: 2
F300 0T 024 6414: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-413-9957
Access Cover

144139957
13-203-200-35: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-307-2441
Cover Strip

143072441
3160S25-21-031-51: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-480-0423
Buckle

144800423
2999: RNCC: 3 | RNVC: 2
197109-025: RNCC: 5 | RNVC: 2

21 Feb 1996

5340-14-467-7280
Rim Latch

144677280
PE75025-64-750: RNCC: 3 | RNVC: 2

27 Jan 1994

5340-14-398-6420
Webbing Strap

143986420
E60-2M: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-350-3692
Mending Plate

143503692
6511-05361: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-243-1808
Mounting Bracket

142431808
253-5M365-3P11C: RNCC: 3 | RNVC: 9
PA253-5M365-3P11C: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-301-5397
Rim Lock Set

143015397
J36-393V0YANTLIBRE0CCUPELAIT0N: RNCC: 2 | RNVC: 2

1 Jan 1973

5340-14-368-7212
Access Cover

143687212
NO PRIMARY REF14-368-7212: RNCC: 3 | RNVC: 2
16-19-003: RNCC: 5 | RNVC: 9
1619003: RNCC: 5 | RNVC: 9

10 Mar 1981

5340-14-376-4979
Angle Bracket

143764979
102195419: RNCC: 3 | RNVC: 2
0152-16-60-02: RNCC: 5 | RNVC: 2
102195419: RNCC: 5 | RNVC: 2

28 Apr 1982

5340-14-442-3280
Angle Bracket

144423280
332P61-5490-2001: RNCC: 3 | RNVC: 2

10 Oct 1990

5340-14-261-2706
Bridge Clamp

142612706
175-61-110: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-462-8364
Block Clamp

144628364
4A-720-10-14: RNCC: 3 | RNVC: 2

5 May 1993

5340-14-447-2450
Retaining Band

144472450
050C06-545174K: RNCC: 3 | RNVC: 2
0545174K00: RNCC: 5 | RNVC: 2

15 May 1991

5340-14-448-9921
Mounting Bracket

144489921
40142287: RNCC: 3 | RNVC: 2
D20-34324: RNCC: 5 | RNVC: 2
5043577: RNCC: 5 | RNVC: 9
D20-34324: RNCC: 5 | RNVC: 9

24 Jul 1991

5340-14-424-0577
Loop Clamp

144240577
1715-08: RNCC: 3 | RNVC: 2
7087105620: RNCC: 5 | RNVC: 2

10 May 1988

5340-14-474-4280
Webbing Strap

144744280
CM9-5-30: RNCC: 3 | RNVC: 2

15 Feb 1995

5340-14-515-3785
Mounting Plate

145153785
G40242-66: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-500-8616
Retaining Clip

145008616
A09020703: RNCC: 3 | RNVC: 2
A09020703: RNCC: 5 | RNVC: 9
F300 0T 024 8819: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-523-6751
Mounting Plate

145236751
J925234: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-500-6205
Block Fairlead

145006205
C63906100000: RNCC: 3 | RNVC: 2
F300 0T 024 6389: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-564-6208
Utility Resilient Mount

145646208
MDS81Y508: RNCC: 3 | RNVC: 2

12 May 2010

5340-14-471-9472
Detent Plunger

144719472
38510300: RNCC: 3 | RNVC: 2
38510300: RNCC: 5 | RNVC: 9

28 Sep 1994

5340-14-431-4092
Loop Clamp

144314092
007370010P: RNCC: 3 | RNVC: 2

17 Apr 1989

5340-14-435-0014
Webbing Strap

144350014
9610012830: RNCC: 3 | RNVC: 2
89437714: RNCC: 5 | RNVC: 2

11 Oct 1989

5340-14-387-3386
Mounting Plate

143873386
0705310468: RNCC: 3 | RNVC: 2
0705310468: RNCC: 5 | RNVC: 9

15 Sep 1983

5340-14-535-1834
Mounting Bracket

145351834
5000607147: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-422-5638
Mending Plate

144225638
06172877: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-14-387-2315
Bumper

143872315
213468: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-14-232-9268
Loop Clamp

142329268
51211905024: RNCC: 3 | RNVC: 2
20P24: RNCC: 5 | RNVC: 2
9562810700: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-519-3509
Mounting Plate

145193509
C533A7100201: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-455-7788
Angle Bracket

144557788
0000783515: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-306-2437
Angle Bracket

143062437
TH20J2148: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-503-0154
Butt Hinge

145030154
332A58-1655-20: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-461-2559
Protection Bellows

144612559
AB125-165 LG MAX 800MM: RNCC: 3 | RNVC: 2
1015171B00: RNCC: 5 | RNVC: 2

3 Mar 1993

5340-14-561-4191
Utility Resilient Mount

145614191
539985 50 14: RNCC: 3 | RNVC: 2
539 985-6160: RNCC: 3 | RNVC: 9
539985 61/60: RNCC: 5 | RNVC: 9
539985-61/60: RNCC: 5 | RNVC: 9

16 Jul 2009

5340-14-303-7349
Butt Hinge

143037349
40BC40X25CADMIE: RNCC: 3 | RNVC: 2
J36190-40X25X2LAIT0NCADMIE: RNCC: 4 | RNVC: 1

1 Jan 1973

5340-14-464-8271
Mortise Lock Set

144648271
484C-1-32N: RNCC: 3 | RNVC: 2

1 Sep 1993

5340-14-544-5581
Lock Bolt

145445581
GSM 488-003JF16: RNCC: 3 | RNVC: 2

10 Feb 2005

5340-14-541-0698
Mounting Bracket

145410698
10-553974-159: RNCC: 3 | RNVC: 2

13 May 2004

5340-14-341-9003
Spring Holder

143419003
M3E702-95-850: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-401-7342
Rim Lock Set

144017342
724-00: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-411-0659
Detent Plunger

144110659
N262-0405-51100-30: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-296-5628
Bumper

142965628
NO PRIMARY REF14-296-5628: RNCC: 3 | RNVC: 2
401498: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-535-5233
Mounting Plate

145355233
355A32-2069-25: RNCC: 3 | RNVC: 2

31 May 2003

5340-14-456-7169
Retaining Band

144567169
853-920-038-0: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-14-271-0212
Loop Clamp

142710212
3160S75-30-025: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-244-7672
Compression Cup

142447672
D1010-505: RNCC: 3 | RNVC: 2
AT5409A: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-301-4545
Eye Hook

143014545
J36-133-60DLAIT: RNCC: 2 | RNVC: 2

1 Jan 1973

5340-14-475-8512
Webbing Strap

144758512
01806-3,5ML/01806/01215: RNCC: 3 | RNVC: 2

10 May 1995

5340-14-473-8116
Mounting Bracket

144738116
332A08-4788-24: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-285-2167
Drift Bolt

142852167
A10-90-133-29-0: RNCC: 3 | RNVC: 2
A10-90-133-29-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-394-2306
Mounting Plate

143942306
AS505-19A: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-543-1484
Mounting Bracket

145431484
MCN1110288-501: RNCC: 3 | RNVC: 2

26 Aug 2004

5340-14-297-7146
Handwheel

142977146
773-413-048FF9: RNCC: 3 | RNVC: 2
773-413-048FF9: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-406-7485
Rigid Caster

144067485
73173: RNCC: 3 | RNVC: 9
85-692-7402: RNCC: 6 | RNVC: 9

8 Jan 1986

5340-14-391-8138
Synchro Clamp

143918138
365A94-3441-12: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-322-0285
Lock-Release Lever

143220285
17751-04: RNCC: 3 | RNVC: 9

1 Jan 1975

5340-14-303-1153
Threaded Rod End

143031153
M3B214-19-03: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-437-4711
Mounting Bracket

144374711
332A91-3122-10: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-239-4373
Cover Strip

142394373
321A25-0002-32: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-218-3120
Retaining Strap

142183120
3160S25-28-052: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-226-9206
Loop Clamp

142269206
C4908: RNCC: 3 | RNVC: 2
9560156380: RNCC: 5 | RNVC: 2
85-689-9750: RNCC: 6 | RNVC: 9

1 Jan 1966

5340-14-339-4931
Retaining Strap

143394931
M3E702-14-810: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-269-4355
Rim Lock

142694355
NO PRIMARY REF14-269-4355: RNCC: 3 | RNVC: 2
264BT38F0UGA: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-407-7544
Webbing Strap

144077544
16298682: RNCC: 1 | RNVC: 2
A01074-03-0000P001: RNCC: 3 | RNVC: 2
16298682: RNCC: 5 | RNVC: 9

3 Mar 1986

5340-14-370-7393
Lock-Release Lever

143707393
676-42815-00L9: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-272-3893
Bumper

142723893
NO PRIMARY REF14-272-3893: RNCC: 3 | RNVC: 2
PA4548012P66: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-485-5733
Mounting Bracket

144855733
332A91-3270-11: RNCC: 3 | RNVC: 2

29 Jan 1997

5340-14-541-8261
Mounting Plate

145418261
88179-1128: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-289-3734
Angle Bracket

142893734
4T003346-00: RNCC: 3 | RNVC: 9

1 Jan 1972

5340-14-550-4524
Loop Clamp

145504524
01870005000: RNCC: 3 | RNVC: 2
AA009566: RNCC: 6 | RNVC: 9

21 Jun 2006

Load More Results