What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 79 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 79 of 446

5340-14-481-6561
Access Cover

144816561
79118224: RNCC: 3 | RNVC: 2
79118224: RNCC: 5 | RNVC: 9

23 May 1996

5340-14-471-2391
Access Cover

144712391
45274907: RNCC: 3 | RNVC: 2
45274907: RNCC: 3 | RNVC: 9

9 Aug 1994

5340-14-443-7301
Plug Button

144437301
AMG252592: RNCC: 3 | RNVC: 2
252592: RNCC: 5 | RNVC: 2

5 Dec 1990

5340-14-473-9461
Access Cover

144739461
39252213: RNCC: 3 | RNVC: 2
39252213: RNCC: 3 | RNVC: 9

18 Jan 1995

5340-14-512-5054
Surface Bolt

145125054
93.304: RNCC: 3 | RNVC: 2
93-304: RNCC: 5 | RNVC: 2

17 Feb 1999

5340-14-365-6524
Retaining Strap

143656524
043-11-00-001: RNCC: 3 | RNVC: 2

8 Oct 1980

5340-14-466-6910
Mounting Plate

144666910
233595: RNCC: 3 | RNVC: 2
85-694-8065: RNCC: 6 | RNVC: 9

24 Nov 1993

5340-14-286-8854
Rod End Clevis

142868854
A10-21-149-02-0: RNCC: 3 | RNVC: 2
A10-21-149-02-0: RNCC: 5 | RNVC: 2
A10-21-149-02-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-454-2721
Access Cover

144542721
427-12279-000: RNCC: 3 | RNVC: 2

26 Mar 1992

5340-14-319-4973
Mounting Bracket

143194973
253-5M662P22B: RNCC: 3 | RNVC: 9
PA253-5M662P22B: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-466-7310
Rim Lock

144667310
NO PRIMARY REF14-466-7310: RNCC: 3 | RNVC: 2
F852086: RNCC: 5 | RNVC: 9

24 Nov 1993

5340-14-339-9726
Retaining Strap

143399726
SQ9-07-01-04: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-304-2151
Access Cover

143042151
170337: RNCC: 3 | RNVC: 2
20-0736: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-339-4922
Angle Bracket

143394922
M3E702-11-820: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-496-9111
Mounting Bracket

144969111
NO PRIMARY REF14-496-9111: RNCC: 3 | RNVC: 2
270-01-89261: RNCC: 5 | RNVC: 9
F300 0T 022 2607: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-316-2063
Bumper

143162063
F292-37-57: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-401-1257
Mounting Plate

144011257
6814-23823: RNCC: 3 | RNVC: 2

29 May 1985

5340-14-431-2781
Mounting Plate

144312781
091-23-103: RNCC: 3 | RNVC: 2

12 Apr 1989

5340-14-553-5492
Mounting Plate

145535492
3419B39-01-03: RNCC: 3 | RNVC: 2

16 Apr 2007

5340-14-360-8313
Retaining Strap

143608313
NO PRIMARY REF14-360-8313: RNCC: 3 | RNVC: 2
3121000: RNCC: 5 | RNVC: 9

19 Dec 1979

5340-14-549-8324
Mounting Plate

145498324
2092763-001: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-336-2440
Loop Clamp

143362440
3691-030: RNCC: 3 | RNVC: 2
85-800-6438: RNCC: 6 | RNVC: 9

24 Jul 1976

5340-14-301-5407
Rim Lock Set

143015407
NO PRIMARY REF14-301-5407: RNCC: 3 | RNVC: 2
631G: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-531-9695
Bow Handle

145319695
15A1302-10: RNCC: 3 | RNVC: 2

2 Oct 2002

5340-14-203-3739
Mending Plate

142033739
3130S28-01-012: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-297-4581
Rim Lock Set

142974581
5315-5715-3GT: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-439-2568
Dashpot Piston

144392568
DA2C285571503: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-562-7104
Utility Access Door

145627104
82388984000: RNCC: 3 | RNVC: 2

16 Nov 2009

5340-14-552-9288
Loop Clamp

145529288
1563892: RNCC: 3 | RNVC: 2
233-418: RNCC: 5 | RNVC: 2

14 Feb 2007

5340-14-530-1213
Mounting Plate

145301213
TB3020108F120: RNCC: 3 | RNVC: 2

14 May 2002

5340-14-291-6921
Extension Shaft

142916921
311-6-6-35: RNCC: 3 | RNVC: 2
311-6-6-35: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-488-1255
Mounting Plate

144881255
25637393: RNCC: 3 | RNVC: 2
2-563739-3: RNCC: 5 | RNVC: 2

18 Apr 1997

5340-14-541-7922
Mounting Bracket

145417922
E63101000057: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-549-5554
Mounting Bracket

145495554
EPIST0E310323: RNCC: 3 | RNVC: 2

14 Apr 2006

5340-14-421-0197
Synchro Clamp

144210197
39530819: RNCC: 3 | RNVC: 2
39530819: RNCC: 5 | RNVC: 9

6 Jan 1988

5340-14-417-6565
Angle Bracket

144176565
M4Z0121907501: RNCC: 3 | RNVC: 2

22 Jul 1987

5340-14-282-5631
Handle Grip

142825631
ES2486: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-450-4976
Retaining Strap

144504976
BLC236479: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-14-350-5110
Retaining Strap

143505110
45357: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-483-8006
Bumper

144838006
8002085K00: RNCC: 1 | RNVC: 2
1CD10953500: RNCC: 3 | RNVC: 2

3 Oct 1996

5340-14-526-8157
Loop Clamp

145268157
5001856138: RNCC: 3 | RNVC: 2

7 Sep 2001

5340-14-536-6754
Mounting Bracket

145366754
47087442: RNCC: 3 | RNVC: 2

10 Sep 2003

5340-14-493-7943
Mounting Plate

144937943
93010170: RNCC: 3 | RNVC: 2
F300 0T 014 0684: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-399-1190
Leaf Spring

143991190
5000714681: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-375-9711
Access Cover

143759711
NO PRIMARY REF14-375-9711: RNCC: 3 | RNVC: 2
404402123: RNCC: 5 | RNVC: 2
404402123: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-353-4848
Angle Bracket

143534848
NO PRIMARY REF14-353-4848: RNCC: 3 | RNVC: 2
542146: RNCC: 5 | RNVC: 2
2542146: RNCC: 5 | RNVC: 9

16 Jan 1979

5340-14-566-1752
Utility Access Door

145661752
170E295-00: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-14-324-0229
Butt Hinge

143240229
26-710506-14: RNCC: 3 | RNVC: 2
85-686-9916: RNCC: 6 | RNVC: 9

1 Jan 1975

5340-14-391-7865
Angle Bracket

143917865
V2PT5013-120167: RNCC: 3 | RNVC: 2
V2PT5013-120167: RNCC: 5 | RNVC: 2

21 Mar 1984

5340-14-360-4163
Angle Bracket

143604163
F10A705200005: RNCC: 3 | RNVC: 2
85-689-8509: RNCC: 6 | RNVC: 9

23 Nov 1979

5340-14-383-8938
Access Cover

143838938
A16AE0010-055: RNCC: 3 | RNVC: 2
A16AE0010-055: RNCC: 5 | RNVC: 2
A16AE0010-055: RNCC: 5 | RNVC: 9
A16AE0010-055: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-297-0838
Angle Bracket

142970838
NO PRIMARY REF14-297-0838: RNCC: 3 | RNVC: 2
42-93-13-20: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-442-0221
Cover Strip

144420221
332A87-1079-29: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-444-9020
Loop Clamp

144449020
BN329-518-F12-141,3: RNCC: 3 | RNVC: 2

28 Jan 1991

5340-14-464-6267
Filler Opening Cap

144646267
811522-00: RNCC: 3 | RNVC: 2
811522: RNCC: 5 | RNVC: 2
811522: RNCC: 5 | RNVC: 9

17 Aug 1993

5340-14-442-9438
Mounting Bracket

144429438
16169073: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-14-533-8409
Mounting Bracket

145338409
46945573: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-515-5405
Mounting Plate

145155405
157B2005: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-416-4784
Angle Bracket

144164784
533457: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-14-235-6892
Mending Plate

142356892
0007009893: RNCC: 3 | RNVC: 2
0007009893: RNCC: 5 | RNVC: 9
7009893: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-508-7919
Mounting Bracket

145087919
PE 12919: RNCC: 3 | RNVC: 2
PE12919: RNCC: 5 | RNVC: 9

30 Sep 1998

5340-14-523-6389
Bow Handle

145236389
C1682107: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-522-5828
Mounting Bracket

145225828
56114781: RNCC: 3 | RNVC: 2

8 Nov 2000

5340-14-449-9984
Expansion Plug

144499984
R93910B160HLT: RNCC: 2 | RNVC: 2
R93910B160HLT: RNCC: 3 | RNVC: 2
5000592798: RNCC: 3 | RNVC: 2

18 Sep 1991

5340-14-399-7104
Tubular Fairlead

143997104
253993: RNCC: 3 | RNVC: 2
253993: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-502-5373
Bow Handle

145025373
5000810581: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-508-7314
Door Handle

145087314
SERIE T2115: RNCC: 3 | RNVC: 2

29 Sep 1998

5340-14-466-1738
Retaining Strap

144661738
166161: RNCC: 3 | RNVC: 2
89170213: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-474-4689
Bumper

144744689
1126006376: RNCC: 3 | RNVC: 2
F300 0T 015 4553: RNCC: 5 | RNVC: 9

15 Feb 1995

5340-14-524-0232
Rope Cleat

145240232
16872: RNCC: 3 | RNVC: 9

22 Feb 2001

5340-14-311-8612
Retaining Strap

143118612
0077810080: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-472-4544
Mounting Bracket

144724544
DXX1113: RNCC: 3 | RNVC: 2

26 Oct 1994

5340-14-285-9813
Leaf Spring

142859813
US51160: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-437-1462
Angle Bracket

144371462
353144: RNCC: 3 | RNVC: 2
353144: RNCC: 5 | RNVC: 9

17 Jan 1990

5340-14-549-6023
Mounting Bracket

145496023
7M223F: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-14-474-9659
Mounting Bracket

144749659
CR454383: RNCC: 3 | RNVC: 2
454383: RNCC: 5 | RNVC: 2
EA20132: RNCC: 5 | RNVC: 2

16 Mar 1995

5340-14-484-9020
Mending Plate

144849020
189307-221: RNCC: 3 | RNVC: 9

12 Dec 1996

5340-14-547-0650
Snap Hook

145470650
16795: RNCC: 3 | RNVC: 2

20 Sep 2005

5340-14-444-2085
Wiring Harness

144442085
A11A822210120A2: RNCC: 3 | RNVC: 2

18 Dec 1990

5340-14-292-0402
Angle Bracket

142920402
156961: RNCC: 3 | RNVC: 2
156961: RNCC: 5 | RNVC: 2
156961: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-402-0296
Rod End Clevis

144020296
213594: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-537-4971
Webbing Strap

145374971
ST3452USP: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-412-2305
Loop Clamp

144122305
0301510590: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-533-5024
Angle Bracket

145335024
39406913: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-493-6370
Mounting Plate

144936370
10210849: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-388-6271
Rod End Clevis

143886271
SA13-1-01-06-001: RNCC: 3 | RNVC: 2

3 Nov 1983

5340-14-252-0610
Mending Plate

142520610
501-775-069-0: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-362-2245
Mending Plate

143622245
1031060033: RNCC: 3 | RNVC: 2
1031060033: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-14-521-3847
Utility Access Door

145213847
Z115-023-000A: RNCC: 3 | RNVC: 2

21 Jul 2000

5340-14-362-6315
Bumper

143626315
2275-38: RNCC: 3 | RNVC: 2
85-691-0796: RNCC: 6 | RNVC: 9

19 Mar 1980

5340-14-387-8943
Loop Clamp

143878943
3-2602-32A: RNCC: 3 | RNVC: 2
3704MRC8-50: RNCC: 5 | RNVC: 2
3-2602-32A20D: RNCC: 5 | RNVC: 9
3-2602-32A: RNCC: 5 | RNVC: 9

12 Oct 1983

5340-14-461-3323
Arched Cushion

144613323
NPAN2S0020-F16-TYPE120-2M: RNCC: 2 | RNVC: 2

8 Mar 1993

5340-14-210-0223
Handwheel

142100223
NO PRIMARY REF14-210-0223: RNCC: 3 | RNVC: 2
16312A: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-490-5638
Mounting Plate

144905638
J05085-01-0100P032: RNCC: 3 | RNVC: 2

2 Oct 1997

5340-14-353-0549
Angle Bracket

143530549
A11A231174123: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-545-3685
Detent Plunger

145453685
T322G1003251: RNCC: 3 | RNVC: 2

8 Apr 2005

5340-14-466-6579
Webbing Strap

144666579
1028229G00: RNCC: 3 | RNVC: 2

22 Nov 1993

5340-14-372-7221
Bumper

143727221
LXA66ACWABM4: RNCC: 3 | RNVC: 9
LXA66ABM4: RNCC: 5 | RNVC: 9

21 Sep 1981

5340-14-546-1554
Retaining Strap

145461554
225291: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-521-4109
Mounting Bracket

145214109
10506894: RNCC: 3 | RNVC: 2

26 Jul 2000

5340-14-481-3723
Angle Bracket

144813723
065987F: RNCC: 3 | RNVC: 2
065987F: RNCC: 5 | RNVC: 2

1 May 1996

5340-14-444-7220
Mounting Plate

144447220
71407: RNCC: 3 | RNVC: 2

21 Jan 1991

5340-14-320-8943
Loop Clamp

143208943
J016: RNCC: 3 | RNVC: 2
4895060: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-541-5228
Angle Bracket

145415228
1091537: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-541-6886
Angle Bracket

145416886
19225302: RNCC: 3 | RNVC: 2

17 Jun 2004

5340-14-548-6831
Angle Bracket

145486831
04EQUEONDU2U006701: RNCC: 3 | RNVC: 2

31 Jan 2006

5340-14-518-1669
Mounting Plate

145181669
5010093567: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-411-6803
Swivel Caster

144116803
30058R: RNCC: 3 | RNVC: 2

27 Aug 1986

5340-14-520-7723
Cover Strip

145207723
T524A2001400: RNCC: 3 | RNVC: 2

14 Jun 2000

5340-14-454-0547
Loop Clamp

144540547
16316995: RNCC: 3 | RNVC: 2
16316995: RNCC: 5 | RNVC: 9

19 Mar 1992

5340-14-550-4916
Angle Bracket

145504916
RA1M112111111A1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-450-4997
Retaining Strap

144504997
BLC238912: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-14-363-1119
Angle Bracket

143631119
26251300: RNCC: 3 | RNVC: 2
540354: RNCC: 5 | RNVC: 2
C251300: RNCC: 5 | RNVC: 2

3 Apr 1980

5340-14-300-3467
Runner

143003467
15434799: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-448-7888
Cushioning Pad

144487888
39232495: RNCC: 3 | RNVC: 2
39232495: RNCC: 5 | RNVC: 9

10 Jul 1991

5340-14-462-6662
Angle Bracket

144626662
74802: RNCC: 3 | RNVC: 2
68285: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-539-4297
Bail Handle

145394297
7358: RNCC: 3 | RNVC: 2
735800901320: RNCC: 5 | RNVC: 2
91851674: RNCC: 5 | RNVC: 2
733510: RNCC: 5 | RNVC: 2

14 Jan 2004

5340-14-423-0578
Mounting Plate

144230578
39229141: RNCC: 3 | RNVC: 2
39229141: RNCC: 5 | RNVC: 9

31 Mar 1988

5340-14-208-8680
Retaining Band

142088680
213507: RNCC: 3 | RNVC: 2
213507: RNCC: 5 | RNVC: 2
213507: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-270-1887
Loop Clamp

142701887
0176-278013: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-229-8151
Loop Clamp

142298151
281200: RNCC: 3 | RNVC: 2
281200: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-518-1112
Mounting Plate

145181112
5000655779: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-409-4094
Pipe Hanger

144094094
104762007: RNCC: 3 | RNVC: 2
104762007: RNCC: 5 | RNVC: 2

28 May 1986

5340-14-526-8669
Webbing Strap

145268669
21230994-00: RNCC: 3 | RNVC: 2
21230994-7: RNCC: 5 | RNVC: 2

12 Sep 2001

5340-14-446-1843
Mending Plate

144461843
2510115801-31: RNCC: 3 | RNVC: 2
2510115-801-31: RNCC: 5 | RNVC: 2

6 Mar 1991

5340-14-334-9050
Loop Clamp

143349050
70-115-12: RNCC: 3 | RNVC: 2
650-402-012-0: RNCC: 5 | RNVC: 2
70-115-12: RNCC: 5 | RNVC: 9
70-115-12: RNCC: 5 | RNVC: 9
85-688-8969: RNCC: 6 | RNVC: 9

2 Jun 1976

5340-14-307-5961
Retaining Strap

143075961
E4P701-55-883: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-410-7464
Access Cover

144107464
A02358-03-1000P023: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-440-3201
Mounting Bracket

144403201
332A58-4588-20: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-438-3313
Quick Release Pin

144383313
808-9,5: RNCC: 3 | RNVC: 2
CLIPS9,5: RNCC: 3 | RNVC: 2
227-9-5-50: RNCC: 5 | RNVC: 2
808D9.5: RNCC: 5 | RNVC: 2
227-9-5: RNCC: 5 | RNVC: 2
SERCLIPS9,5: RNCC: 5 | RNVC: 9

13 Mar 1990

5340-14-438-5103
Synchro Clamp

144385103
DA2C420211001: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-496-3863
Mounting Plate

144963863
194234: RNCC: 3 | RNVC: 2
F300 0T 021 4741: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-459-7283
Cover Strip

144597283
LN321022REP3JAG3: RNCC: 3 | RNVC: 2
RAB0159: RNCC: 5 | RNVC: 2

15 Dec 1992

5340-14-511-8007
Mounting Plate

145118007
402F685: RNCC: 3 | RNVC: 2
402F685: RNCC: 5 | RNVC: 2

26 Jan 1999

5340-14-527-6536
Retaining Strap

145276536
624559: RNCC: 3 | RNVC: 2

7 Nov 2001

5340-14-350-5174
Bow Handle

143505174
NO PRIMARY REF14-350-5174: RNCC: 3 | RNVC: 2
745014: RNCC: 5 | RNVC: 9

12 Jul 1978

5340-14-532-3569
Angle Bracket

145323569
RA1B216811641: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-284-0318
Loop Clamp

142840318
NO PRIMARY REF14-284-0318: RNCC: 3 | RNVC: 2
19297778: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-368-3228
Retaining Strap

143683228
004150222P: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-14-486-1767
Angle Bracket

144861767
PA01PD030119: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-438-7783
Plate Spacer

144387783
330A93-5800-20: RNCC: 3 | RNVC: 2

4 Apr 1990

5340-14-411-5533
Mending Plate

144115533
0A2751: RNCC: 3 | RNVC: 2

21 Aug 1986

5340-14-531-1460
Mounting Bracket

145311460
TB1030101F014: RNCC: 3 | RNVC: 2

24 Jul 2002

5340-14-462-2871
Mounting Plate

144622871
SMCFAGED0260: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-14-435-4831
Mounting Plate

144354831
DA2C201741001: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-476-7130
Runner

144767130
101163901510: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-14-328-7556
Angle Bracket

143287556
106082001102: RNCC: 3 | RNVC: 2
106082001102: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-459-9201
Angle Bracket

144599201
DLT115507: RNCC: 3 | RNVC: 2

24 Dec 1992

5340-14-389-9680
Access Cover

143899680
13206BLEUAMBIANCE: RNCC: 3 | RNVC: 2
13206: RNCC: 5 | RNVC: 2

26 Jan 1984

5340-14-314-4054
Access Cover

143144054
7700505734: RNCC: 3 | RNVC: 2
7700505734: RNCC: 3 | RNVC: 2
7700505734: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-552-9568
Utility Access Door

145529568
611179: RNCC: 3 | RNVC: 2

19 Feb 2007

5340-14-418-5670
Angle Bracket

144185670
006485035P: RNCC: 3 | RNVC: 2

2 Sep 1987

5340-14-544-0633
Mounting Bracket

145440633
5010604056: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-14-479-1026
Mounting Plate

144791026
5033021322: RNCC: 3 | RNVC: 2
9223378280: RNCC: 5 | RNVC: 2
218402300511: RNCC: 5 | RNVC: 2
218402300511: RNCC: 5 | RNVC: 2
F300 0T 005 8502: RNCC: 6 | RNVC: 9

13 Dec 1995

5340-14-406-2129
Retaining Strap

144062129
1183369: RNCC: 3 | RNVC: 2
22384652: RNCC: 5 | RNVC: 2
1183369: RNCC: 5 | RNVC: 2

8 Jan 1986

5340-14-554-5400
Access Cover

145545400
0074880770: RNCC: 3 | RNVC: 2

18 Jul 2007

5340-14-439-0910
Access Cover

144390910
0223217090: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-435-9118
Runner

144359118
39139648: RNCC: 3 | RNVC: 2

29 Nov 1989

5340-14-502-6191
Mounting Bracket

145026191
5516031646: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-042-8187
Bumper

140428187
H105788: RNCC: 3 | RNVC: 2
89254848: RNCC: 5 | RNVC: 2

11 Dec 1980

5340-14-414-9644
Access Cover

144149644
227058: RNCC: 3 | RNVC: 2

26 Mar 1987

5340-14-550-5129
Angle Bracket

145505129
RA1M701752161A1N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-409-0769
Access Cover

144090769
4771621850: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-534-7120
Access Cover

145347120
10541655: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-503-8769
Detent Plunger

145038769
2100255: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-14-504-9333
Blank Panel

145049333
PANNE94072A00: RNCC: 3 | RNVC: 2
PANNE94072X00: RNCC: 5 | RNVC: 9

11 Mar 1998

5340-14-551-2692
Angle Bracket

145512692
RA1A702206117: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-517-0000
Angle Bracket

145170000
RA1M701208250N1: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-503-0204
Bow Handle

145030204
E7411119: RNCC: 3 | RNVC: 9

17 Dec 1997

5340-14-515-5767
Mounting Plate

145155767
21860002A: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-332-7154
Loop Clamp

143327154
840755: RNCC: 3 | RNVC: 2
4936: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-504-7036
Angle Bracket

145047036
448401Y: RNCC: 3 | RNVC: 2
5001833876: RNCC: 3 | RNVC: 2
455874W: RNCC: 5 | RNVC: 9

27 Feb 1998

5340-14-373-5526
Bumper

143735526
9457-79-01: RNCC: 3 | RNVC: 2

21 Oct 1981

5340-14-310-3008
Mending Plate

143103008
3097-06-10-002: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-341-1859
Access Cover

143411859
M3B701-63-02: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-378-4154
Angle Bracket

143784154
366A68-1386-20: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-457-2468
Mounting Plate

144572468
402365A-SG10137-Z2CND17-12: RNCC: 3 | RNVC: 2

20 Aug 1992

5340-14-439-8348
Corner Brace

144398348
332A58-1326-03: RNCC: 3 | RNVC: 2

23 May 1990

5340-14-217-9020
Loop Clamp

142179020
3160S23-11-225: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-536-5352
Detent Plunger

145365352
32-055-12: RNCC: 3 | RNVC: 2

28 Aug 2003

5340-14-406-4603
Rod End Clevis

144064603
FD2B261-38: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-470-2882
Plug Button

144702882
S038-12-23: RNCC: 3 | RNVC: 2

14 Jun 1994

5340-14-555-0851
Mounting Bracket

145550851
332A21-1500-BF01: RNCC: 3 | RNVC: 2

27 Sep 2007

5340-14-246-2758
Retaining Band

142462758
410533-31: RNCC: 3 | RNVC: 2
410533-31: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-435-4855
Runner

144354855
DA2C201753003: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-547-6134
Webbing Strap

145476134
7420813331: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-14-368-2164
Bumper

143682164
148293101: RNCC: 3 | RNVC: 2
148293101: RNCC: 5 | RNVC: 2

20 Feb 1981

5340-14-554-2521
Elastic Strap

145542521
82141788000: RNCC: 3 | RNVC: 2

15 Jun 2007

5340-14-553-9993
Mounting Bracket

145539993
156 087: RNCC: 3 | RNVC: 2
156 087: RNCC: 3 | RNVC: 2

6 Jun 2007

5340-14-483-0141
Mounting Bracket

144830141
PM1A713310410: RNCC: 3 | RNVC: 2
PM1A713310410: RNCC: 5 | RNVC: 2

1 Aug 1996

5340-14-459-4066
Mounting Plate

144594066
151A101719: RNCC: 3 | RNVC: 2

26 Nov 1992

5340-14-515-3312
Mounting Bracket

145153312
3534308200: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-540-7457
Mounting Bracket

145407457
38051867: RNCC: 3 | RNVC: 2
ND053752: RNCC: 5 | RNVC: 2
4848ZG8613181468: RNCC: 6 | RNVC: 9

23 Apr 2004

5340-14-520-0195
Mounting Bracket

145200195
10491779: RNCC: 3 | RNVC: 2

3 May 2000

5340-14-463-7950
Anchor Strap

144637950
21384360-00: RNCC: 3 | RNVC: 2
21386713-3: RNCC: 5 | RNVC: 2

30 Jun 1993

5340-14-334-8871
Rod End Clevis

143348871
880-11-0-064-0: RNCC: 3 | RNVC: 2

2 Jun 1976

5340-14-314-2372
Pipe Hanger

143142372
A10-52-430-23-0: RNCC: 3 | RNVC: 2
A10-52-430-23-0: RNCC: 5 | RNVC: 2
A10-52-430-23-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-445-5088
Mounting Bracket

144455088
ST406M63P15BIS-E6: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-432-1750
Mounting Bracket

144321750
3511 265 06121: RNCC: 3 | RNVC: 2
3511-265-06121: RNCC: 5 | RNVC: 2
8794-4: RNCC: 5 | RNVC: 9

24 May 1989

5340-14-478-6497
Rod End Clevis

144786497
E0035-03-03REP24: RNCC: 3 | RNVC: 2
E0035-03-03F16/25: RNCC: 5 | RNVC: 2
E0036-03-03REP24: RNCC: 5 | RNVC: 2

9 Nov 1995

5340-14-302-1497
Mending Plate

143021497
A10-22-800-10-0: RNCC: 3 | RNVC: 2
A10-22-800-10-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-554-8659
Utility Access Door

145548659
432-07: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-475-0995
Mounting Bracket

144750995
312-10266-001: RNCC: 3 | RNVC: 2

17 Mar 1995

5340-14-413-0323
Swivel Caster

144130323
A86-1550: RNCC: 3 | RNVC: 2

20 Nov 1986

5340-14-517-2060
Lock-Release Lever

145172060
IC1914: RNCC: 3 | RNVC: 2
IC1914-1: RNCC: 5 | RNVC: 2
91662497: RNCC: 5 | RNVC: 2

17 Nov 1999

5340-14-404-0149
Retaining Strap

144040149
350A41-1009-20: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-473-8587
Mounting Bracket

144738587
332A76-3196-00: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-453-2866
Blank Panel

144532866
2920-50-04-00: RNCC: 3 | RNVC: 2
89472931: RNCC: 5 | RNVC: 2

12 Feb 1992

5340-14-514-7293
Access Cover

145147293
121E516-00: RNCC: 3 | RNVC: 2
121E516-00: RNCC: 5 | RNVC: 9

11 Jun 1999

5340-14-511-3608
Pipe Hanger

145113608
F704-21: RNCC: 3 | RNVC: 2

16 Dec 1998

5340-14-257-2221
Door Hook

142572221
330A22-2196-21: RNCC: 3 | RNVC: 2
330A22-2196-2100: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-543-2446
Synchro Clamp

145432446
NSA8601-14: RNCC: 3 | RNVC: 2

8 Oct 2004

5340-14-408-7249
Rod End Clevis

144087249
3874-35: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-524-7057
Mounting Bracket

145247057
D24AB1071-001: RNCC: 3 | RNVC: 2
D24AB1071-001: RNCC: 5 | RNVC: 2

5 Apr 2001

5340-14-379-8213
Loop Clamp

143798213
51300005010: RNCC: 3 | RNVC: 2
11N10: RNCC: 5 | RNVC: 2
A0021-11N10: RNCC: 5 | RNVC: 2
ASNA0021-11N10: RNCC: 5 | RNVC: 2
9562811150: RNCC: 5 | RNVC: 2

20 Oct 1982

5340-14-438-9298
Angle Bracket

144389298
332A67-3861-A6: RNCC: 3 | RNVC: 2

11 Apr 1990

5340-14-533-1763
Angle Bracket

145331763
DSTALVPE: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-14-396-4541
Case Leg

143964541
NO PRIMARY REF14-396-4541: RNCC: 3 | RNVC: 2
91361314: RNCC: 5 | RNVC: 2
IE4522: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-402-6957
Anchor Strap

144026957
3524-16: RNCC: 3 | RNVC: 2
7910031390: RNCC: 5 | RNVC: 2

19 Jul 1985

5340-14-452-7250
Mounting Bracket

144527250
ST406M61P51-13: RNCC: 3 | RNVC: 2

15 Jan 1992

5340-14-377-6658
Quick Release Pin

143776658
160-882032-21: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-313-5830
Support Hook

143135830
121S71-135-01-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-010-0193
Cover Strip

140100193
3130S25-10-024-1: RNCC: 3 | RNVC: 2

1 Jan 1961

5340-14-413-1529
Anchor Strap

144131529
23116208-4: RNCC: 3 | RNVC: 2
23116208: RNCC: 5 | RNVC: 2

26 Nov 1986

5340-14-303-5602
Anchor Strap

143035602
F762-19: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-523-6164
Metal Grille

145236164
9910-16-00-5A: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-418-1634
Access Cover

144181634
9510-11: RNCC: 3 | RNVC: 9

6 Aug 1987

5340-14-418-1391
Anchor Strap

144181391
LTCV121-11: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-413-9884
Retaining Strap

144139884
BJM08859: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-416-4654
Webbing Strap

144164654
532558: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-14-438-7313
Angle Bracket

144387313
3124387: RNCC: 3 | RNVC: 2
3124387: RNCC: 5 | RNVC: 2

2 Apr 1990

5340-14-526-8138
Loop Clamp

145268138
5001849326: RNCC: 3 | RNVC: 2

7 Sep 2001

5340-14-482-9277
Cover Strip

144829277
DS1P202732861: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-377-0618
Pipe Hanger

143770618
30MS101: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-474-2945
Mounting Plate

144742945
20712103: RNCC: 3 | RNVC: 2

8 Feb 1995

5340-14-531-1275
Bridge Clamp

145311275
10375394: RNCC: 3 | RNVC: 2

24 Jul 2002

5340-14-533-4845
Lock Bolt

145334845
17752G: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-380-1160
Bumper

143801160
BBZ0772: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-235-1738
Angle Bracket

142351738
508P489: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-477-7938
Pipe Hanger

144777938
050180: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-14-449-8462
Lock-Release Lever

144498462
381034S: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-14-441-4340
Butt Hinge

144414340
PM1A125810043U1: RNCC: 3 | RNVC: 2
PM1A125810043U1: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-14-470-3272
Angle Bracket

144703272
202948: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-231-0906
Loop Clamp

142310906
51213102011: RNCC: 3 | RNVC: 2
20G11: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-515-6184
Mounting Plate

145156184
1197187: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-542-0041
Mounting Plate

145420041
20042-050: RNCC: 3 | RNVC: 2
502106005017A: RNCC: 3 | RNVC: 9
2 0042-050: RNCC: 5 | RNVC: 2

2 Jul 2004

5340-14-425-4817
Control Rod

144254817
0010216337A350: RNCC: 3 | RNVC: 2
1-350-216: RNCC: 3 | RNVC: 9

6 Jul 1988

5340-14-542-9935
Utility Access Door

145429935
5924-CF-50-1-0-0100-2/3-6: RNCC: 3 | RNVC: 9

18 Aug 2004

5340-14-252-1827
Angle Bracket

142521827
9970-145-083: RNCC: 3 | RNVC: 2
456-701-684-0: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-424-9890
Access Cover

144249890
21522388-4: RNCC: 3 | RNVC: 2
21522388: RNCC: 5 | RNVC: 2

16 Jun 1988

5340-14-333-1468
Mending Plate

143331468
485-200-795-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-458-8604
Belt-Strap Keeper

144588604
11323-185-160: RNCC: 3 | RNVC: 2
11323-160-185: RNCC: 5 | RNVC: 2
11323-185PARKERISEVERNINOIR: RNCC: 5 | RNVC: 2
RAR3521: RNCC: 5 | RNVC: 2
11323-185NOIR: RNCC: 5 | RNVC: 2

5 Nov 1992

5340-14-430-9225
Loop Clamp

144309225
160H732611-05: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-14-296-9868
Pipe Hanger

142969868
91420B6-6-16-16B76: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-510-9949
Access Cover

145109949
309-147-201-0: RNCC: 3 | RNVC: 2

25 Nov 1998

5340-14-466-5425
Blank Panel

144665425
40-6-4E5-17: RNCC: 3 | RNVC: 2
89234673: RNCC: 5 | RNVC: 2

15 Nov 1993

5340-14-501-1531
Access Cover

145011531
014-013-253: RNCC: 3 | RNVC: 2
014.013.253: RNCC: 3 | RNVC: 2
F300 0T 025 1933: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-465-2924
Mounting Bracket

144652924
365A76-1049-01: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-465-2987
Mounting Plate

144652987
365A81-0281-20: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-298-5570
Strapping

142985570
BANDEIN0X12MM: RNCC: 3 | RNVC: 2
BANDEACIERIN0XE0-5L12MM: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-350-2243
Webbing Strap

143502243
020009-1: RNCC: 3 | RNVC: 2
A0478-068F5: RNCC: 3 | RNVC: 2
231100-50-17-126: RNCC: 3 | RNVC: 9

14 Jun 1978

5340-14-424-9538
Bail Handle

144249538
PR.303-A0: RNCC: 3 | RNVC: 2
PR303A0: RNCC: 5 | RNVC: 2
5000923455: RNCC: 5 | RNVC: 2

15 Jun 1988

5340-14-357-8545
Access Cover

143578545
3511-131-24461: RNCC: 3 | RNVC: 2
3511 131 24461: RNCC: 5 | RNVC: 2

20 Jul 1979

5340-14-389-2412
Bumper

143892412
DHE5-010002: RNCC: 3 | RNVC: 2
85-692-3914: RNCC: 6 | RNVC: 9

29 Nov 1983

5340-14-430-9343
Angle Bracket

144309343
G230010-07: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-14-514-4743
Shelf Bracket

145144743
45219931: RNCC: 3 | RNVC: 2
45219931: RNCC: 5 | RNVC: 2
IF-192-0442: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-040-4300
Rod End Clevis

140404300
160-46044-01: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-454-1725
Rim Latch

144541725
LN331-018 3222431-05: RNCC: 3 | RNVC: 2
322243105: RNCC: 5 | RNVC: 2

24 Mar 1992

5340-14-340-3374
Access Cover

143403374
M3C704-88-02: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-258-8340
Loop Clamp

142588340
NO PRIMARY REF14-258-8340: RNCC: 3 | RNVC: 2
694006-1C: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-322-0796
Access Cover

143220796
M230-18: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-511-6214
Pipe Hanger

145116214
78733-025-030B: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-555-0990
Kick Door Plate

145550990
365A25-0510-25: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-14-285-8234
Rod End Clevis

142858234
105-58-00-02: RNCC: 3 | RNVC: 2
105-58-00-02: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-377-2542
Mounting Plate

143772542
366A58-0100-70: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-301-9843
Angle Bracket

143019843
A10-50-230-05-0: RNCC: 3 | RNVC: 2
A10-50-230-05-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-270-8633
Retaining Strap

142708633
H90Z2524: RNCC: 3 | RNVC: 2
530892: RNCC: 5 | RNVC: 2

4 May 1983

5340-14-496-0032
Angle Bracket

144960032
99 03 558: RNCC: 3 | RNVC: 2
EKMATIC400: RNCC: 3 | RNVC: 9
EKMATIC400: RNCC: 5 | RNVC: 9
F300 0T 020 7472: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-458-1361
Bumper

144581361
053206H: RNCC: 3 | RNVC: 2

8 Oct 1992

5340-14-500-4938
Angle Bracket

145004938
12053: RNCC: 3 | RNVC: 2
F300 0T 024 5109: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-486-4864
Mending Plate

144864864
574380: RNCC: 3 | RNVC: 2

21 Mar 1997

5340-14-525-6535
Loop Clamp

145256535
20 242 030 5260: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-325-9103
Key Blank

143259103
25511B4X5XC38: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-550-5102
Mounting Bracket

145505102
RA1M701926111: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-504-0784
Bow Handle

145040784
MB1039F00: RNCC: 3 | RNVC: 2

5 Feb 1998

5340-14-470-0236
Lock-Release Lever

144700236
BFC20184: RNCC: 3 | RNVC: 2
89171589: RNCC: 5 | RNVC: 2

25 May 1994

5340-14-300-6112
Retaining Strap

143006112
53314-1: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-378-5450
Angle Bracket

143785450
121E63-205-27-0: RNCC: 3 | RNVC: 2
121E63-205-27-0: RNCC: 5 | RNVC: 2

11 Aug 1982

5340-14-305-6270
Butt Hinge

143056270
4550SY40X35GCHR0ME: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-453-3749
Retaining Strap

144533749
A860974: RNCC: 3 | RNVC: 2
A860974: RNCC: 5 | RNVC: 9

19 Feb 1992

5340-14-305-2534
Mounting Plate

143052534
TH20K907: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-296-8274
Angle Bracket

142968274
171161: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-410-6300
Access Cover

144106300
304579: RNCC: 3 | RNVC: 2
GE5169-30-04: RNCC: 5 | RNVC: 2

9 Jul 1986

5340-14-427-0459
Access Door Hinge

144270459
NG416-71: RNCC: 3 | RNVC: 2

5 Oct 1988

5340-14-424-6507
Access Cover

144246507
21522336-8: RNCC: 3 | RNVC: 2
21522336: RNCC: 5 | RNVC: 2

2 Jun 1988

5340-14-392-6371
Webbing Strap

143926371
4-000011-000038: RNCC: 3 | RNVC: 2
4-011-0038: RNCC: 5 | RNVC: 2

7 Apr 1984

5340-14-493-1745
Loop Clamp

144931745
NO PRIMARY REF14-493-1745: RNCC: 3 | RNVC: 2
1258-059: RNCC: 5 | RNVC: 9
1258059: RNCC: 5 | RNVC: 9
F300 0T 010 9669: RNCC: 6 | RNVC: 9
F300 0T 017 8347: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-207-2537
Doorstop

142072537
3160S25-11-350: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-440-9773
Angle Bracket

144409773
3289AB99-312: RNCC: 3 | RNVC: 2

9 Aug 1990

5340-14-369-1661
Bumper

143691661
365A91-1150-42: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-570-4702
Utility Resilient Mount

145704702
BF45-425E15: RNCC: 3 | RNVC: 2

16 Dec 2011

5340-14-530-9314
Angle Bracket

145309314
SMC-S-16900-011-0: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-14-501-8174
Angle Bracket

145018174
307-847-703-0: RNCC: 3 | RNVC: 2
307-847-701-0: RNCC: 5 | RNVC: 2

12 Nov 1997

5340-14-355-8100
Bridge Clamp

143558100
853864-001: RNCC: 3 | RNVC: 2
853864-001: RNCC: 5 | RNVC: 2
853864-001: RNCC: 5 | RNVC: 9
853864-001: RNCC: 5 | RNVC: 9

19 Mar 1979

5340-14-447-2781
Block Clamp

144472781
332A67-1489-60: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-351-5929
Quick Release Pin

143515929
73-051-048: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-291-2009
Snap Hook

142912009
4810-90-104: RNCC: 3 | RNVC: 2
4810-90-14: RNCC: 5 | RNVC: 2
4810-90: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-528-9417
Handle Grip

145289417
4193-01-021A: RNCC: 3 | RNVC: 2
8038105D00: RNCC: 5 | RNVC: 2

27 Feb 2002

5340-14-393-0002
Leaf Spring

143930002
5000706987: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-14-317-7059
Access Cover

143177059
466-8A2P31: RNCC: 3 | RNVC: 2
466-8A2P31: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-507-3565
Plug Button

145073565
46830739: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-14-353-1838
Access Cover

143531838
26045394: RNCC: 3 | RNVC: 2
26045394: RNCC: 3 | RNVC: 9

8 Dec 1978

5340-14-397-3469
Retaining Strap

143973469
16985976: RNCC: 3 | RNVC: 2

5 Dec 1984

5340-14-492-5494
Access Cover

144925494
5000922663: RNCC: 3 | RNVC: 2
F300 0T 007 9518: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-433-4444
Anchor Strap

144334444
11050: RNCC: 3 | RNVC: 2

26 Jul 1989

5340-14-347-9842
Access Cover

143479842
622041: RNCC: 3 | RNVC: 2
622041: RNCC: 5 | RNVC: 9

29 Mar 1978

5340-14-520-6091
Utility Access Door

145206091
45568675: RNCC: 3 | RNVC: 2

24 May 2000

5340-14-504-9395
Loop Clamp

145049395
PARTI91928X00: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-431-4243
Access Cover

144314243
43177: RNCC: 3 | RNVC: 2

23 Aug 2000

5340-14-480-6588
Mounting Bracket

144806588
35 58 00: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-419-2838
Retaining Strap

144192838
BAZ98066: RNCC: 3 | RNVC: 2

16 Oct 1987

5340-14-482-8071
Mounting Plate

144828071
HSS831AH571: RNCC: 3 | RNVC: 2
89167384: RNCC: 5 | RNVC: 2

25 Jul 1996

5340-14-370-5346
Retaining Strap

143705346
16324422: RNCC: 3 | RNVC: 2
16324422: RNCC: 5 | RNVC: 2
16324422: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-508-0377
Runner

145080377
4773220560: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-399-1306
Synchro Clamp

143991306
7701005032: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-214-3776
Loop Clamp

142143776
51123105024: RNCC: 3 | RNVC: 2
25GE24: RNCC: 5 | RNVC: 2
91304016: RNCC: 5 | RNVC: 2
91304016: RNCC: 5 | RNVC: 2
243192400: RNCC: 5 | RNVC: 2
24GE24: RNCC: 5 | RNVC: 2
A0021-25GE24: RNCC: 5 | RNVC: 9
85-695-0949: RNCC: 6 | RNVC: 9

1 Jan 1965

5340-14-359-0942
Angle Bracket

143590942
A11A765310140: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-500-8255
Section Block Clamp

145008255
E64009998029: RNCC: 3 | RNVC: 2
F300 0T 024 8457: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-406-2140
Runner

144062140
2557021: RNCC: 3 | RNVC: 2
9950960028: RNCC: 5 | RNVC: 2
22631363: RNCC: 5 | RNVC: 2
2557021: RNCC: 5 | RNVC: 2

8 Jan 1986

5340-14-504-1539
Mounting Bracket

145041539
009382019Z: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-506-2957
Retaining Strap

145062957
38511716: RNCC: 3 | RNVC: 2
38511716: RNCC: 5 | RNVC: 9

22 Apr 1998

5340-14-466-7344
Webbing Strap

144667344
TB2020117: RNCC: 3 | RNVC: 2

24 Nov 1993

5340-14-571-3652
Utility Resilient Mount

145713652
5313010030: RNCC: 3 | RNVC: 2
531301: RNCC: 5 | RNVC: 1

19 Mar 2012

5340-14-501-4587
Access Cover

145014587
NO PRIMARY REF14-501-4587: RNCC: 3 | RNVC: 2
NNP5340844554683: RNCC: 5 | RNVC: 9

29 Oct 1997

5340-14-465-9705
Bail Handle

144659705
3511 310 81991: RNCC: 3 | RNVC: 2
3511-310-81991: RNCC: 5 | RNVC: 2

26 Oct 1993

5340-14-456-3218
Loop Clamp

144563218
E1M-3708-01: RNCC: 3 | RNVC: 2
E1M3708-01: RNCC: 5 | RNVC: 2
MAT169-0024F8ROUGE: RNCC: 5 | RNVC: 2
E1M3708-01: RNCC: 5 | RNVC: 2

25 Jun 1992

5340-14-463-3864
Handwheel

144633864
0664-161: RNCC: 3 | RNVC: 2
664-16: RNCC: 5 | RNVC: 2

9 Jun 1993

5340-14-549-4960
Utility Access Door

145494960
MC201-215210-00: RNCC: 3 | RNVC: 2

11 Apr 2006

5340-14-472-9704
Angle Bracket

144729704
38512335: RNCC: 3 | RNVC: 2
38512335: RNCC: 5 | RNVC: 9

23 Nov 1994

5340-14-360-2190
Flush Catch Claw

143602190
16293707: RNCC: 3 | RNVC: 2
16293707: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-500-6208
Rod End Connector

145006208
D63904300000: RNCC: 3 | RNVC: 2
F300 0T 024 6392: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-500-3875
Pad Eye

145003875
B62102930000: RNCC: 3 | RNVC: 2
F300 0T 024 3976: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-399-9500
Loop Clamp

143999500
602262: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-414-2033
Retaining Strap

144142033
313660: RNCC: 3 | RNVC: 2
313660: RNCC: 5 | RNVC: 9

22 Jan 1987

5340-14-445-2507
Mounting Plate

144452507
1082128: RNCC: 3 | RNVC: 2
1082128: RNCC: 5 | RNVC: 2

6 Feb 1991

5340-14-552-4141
Mounting Bracket

145524141
82157614000: RNCC: 3 | RNVC: 2

20 Dec 2006

5340-14-337-6629
Rod End Connector

143376629
0033616467: RNCC: 3 | RNVC: 2
5000516599: RNCC: 5 | RNVC: 2
0033616467: RNCC: 5 | RNVC: 9
5000516599: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-14-515-7518
Handwheel

145157518
89090200108999A: RNCC: 3 | RNVC: 2

28 Jul 1999

5340-14-475-5577
Support Hook

144755577
0787358X00: RNCC: 3 | RNVC: 2

18 Apr 1995

5340-14-519-6938
Mounting Plate

145196938
F00189183: RNCC: 3 | RNVC: 2
F00189183: RNCC: 5 | RNVC: 9

29 Mar 2000

5340-14-360-1757
Angle Bracket

143601757
A11A234352061A1: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-536-6853
Rim Lock

145366853
61365328: RNCC: 3 | RNVC: 2

10 Sep 2003

5340-14-535-1686
Angle Bracket

145351686
5000603932: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-548-9104
Mounting Plate

145489104
82067661000: RNCC: 3 | RNVC: 2

23 Feb 2006

5340-14-435-6006
Mounting Bracket

144356006
1525129: RNCC: 3 | RNVC: 2
1525129: RNCC: 5 | RNVC: 2

13 Nov 1989

5340-14-548-8566
Rod Retainer Clip

145488566
0301067370: RNCC: 3 | RNVC: 2

20 Feb 2006

5340-14-507-5785
Retaining Strap

145075785
5000450: RNCC: 3 | RNVC: 2
5000450NI50: RNCC: 5 | RNVC: 2
CAE01428: RNCC: 5 | RNVC: 2
071364000000011: RNCC: 5 | RNVC: 2

23 Jul 1998

5340-14-366-2765
Angle Bracket

143662765
A11A234160041: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-484-1351
Rod End Clevis

144841351
4348575: RNCC: 3 | RNVC: 2
4348575: RNCC: 5 | RNVC: 9

24 Oct 1996

5340-14-484-0209
Access Cover

144840209
M0282B: RNCC: 3 | RNVC: 2

17 Oct 1996

5340-14-357-9285
Retaining Strap

143579285
217235: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-14-435-1046
Angle Bracket

144351046
3005267: RNCC: 3 | RNVC: 2

18 Oct 1989

5340-14-479-3254
Retaining Strap

144793254
1074980X00: RNCC: 3 | RNVC: 2

10 Jan 1996

5340-14-467-4056
Mounting Bracket

144674056
1027359N00: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-14-383-1870
Pipe Hanger

143831870
MY2051510610G01: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-488-2181
Access Cover

144882181
29730163: RNCC: 3 | RNVC: 2
29730163: RNCC: 3 | RNVC: 9

23 Apr 1997

5340-14-254-8952
Access Cover

142548952
49497: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-235-8626
Rod End Clevis

142358626
321A25-0089-20: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-263-9604
Cover Strip

142639604
330A25-2181-00: RNCC: 3 | RNVC: 2
330A25-2181-0000: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-542-0504
Clamping Catch

145420504
21674269-004: RNCC: 3 | RNVC: 2
502118009003A: RNCC: 3 | RNVC: 9
2167 4269-004: RNCC: 5 | RNVC: 2

2 Jul 2004

5340-14-257-0922
Rod End Clevis

142570922
330A27-4231-20: RNCC: 3 | RNVC: 2
330A27-4231-2000: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-225-8584
Loop Clamp

142258584
3160S81-10-063: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-442-5036
Loop Clamp

144425036
200570-03625: RNCC: 3 | RNVC: 2
200570-04725: RNCC: 5 | RNVC: 2
B114: RNCC: 5 | RNVC: 2
91633283: RNCC: 5 | RNVC: 2

17 Oct 1990

5340-14-456-3226
Loop Clamp

144563226
E1M-3715-01: RNCC: 3 | RNVC: 2
MAT169-0024F16ROUGE: RNCC: 5 | RNVC: 2
E1M3715-01: RNCC: 5 | RNVC: 2
E1M3715-01: RNCC: 5 | RNVC: 2

25 Jun 1992

5340-14-463-6443
Runner

144636443
MAT292-0097F1: RNCC: 3 | RNVC: 2

23 Jun 1993

5340-14-472-8740
Cover Strip

144728740
332A25-1284-21: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-308-0185
Rod End Clevis

143080185
A4-76286: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-410-3395
Angle Bracket

144103395
110-513-21-32: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-14-430-9360
Angle Bracket

144309360
G230011-05: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-14-320-8518
Loop Clamp

143208518
M3R709-38: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-365-9077
Loop Clamp

143659077
52213110011: RNCC: 3 | RNVC: 2
310G11: RNCC: 5 | RNVC: 2

4 Nov 1980

5340-14-450-0007
Webbing Strap

144500007
5010044592: RNCC: 3 | RNVC: 2

18 Sep 1991

5340-14-465-1752
Mounting Plate

144651752
365A81-0190-74: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-382-4928
Loop Clamp

143824928
045S03-576107L: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-382-1853
Butt Hinge

143821853
C04: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-217-8935
Retaining Strap

142178935
3160S50-20-328: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-358-4273
Retaining Strap

143584273
393175: RNCC: 3 | RNVC: 2

13 Aug 1979

5340-14-500-3852
Mounting Plate

145003852
D62102350001: RNCC: 3 | RNVC: 2
F300 0T 024 3953: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-490-2985
Mounting Bracket

144902985
J05085-04-0100P004: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-473-3294
Pipe Hanger

144733294
78732-040-023B: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-315-5157
Plug Button

143155157
1450-14: RNCC: 3 | RNVC: 2
1450-14-040-3020: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-462-0231
Control Rod

144620231
A1-77423: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-203-0818
Loop Clamp

142030818
3130S35-31-020: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-457-4832
Loop Clamp

144574832
MAT169-0029F4: RNCC: 3 | RNVC: 2

8 Sep 1992

5340-14-385-3218
Pipe Hanger

143853218
365A57-3314-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-399-0058
Access Cover

143990058
AZ18553: RNCC: 3 | RNVC: 2
6817471-053: RNCC: 5 | RNVC: 2
6817471053: RNCC: 5 | RNVC: 2

6 Mar 1985

5340-14-474-7454
Retaining Strap

144747454
020076A01TRA: RNCC: 3 | RNVC: 2
020076A: RNCC: 5 | RNVC: 2

1 Mar 1995

5340-14-361-1637
Runner

143611637
103671001: RNCC: 3 | RNVC: 2
103671001: RNCC: 5 | RNVC: 2

24 Jan 1980

5340-14-470-4122
Mending Plate

144704122
0390140490: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-543-4846
Access Cover

145434846
F1414849: RNCC: 3 | RNVC: 2

9 Nov 2004

5340-14-423-9411
Access Cover

144239411
P118306D: RNCC: 3 | RNVC: 2

5 May 1988

5340-14-457-5762
Access Cover

144575762
5000663445: RNCC: 3 | RNVC: 2
89287590: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-346-7981
Mending Plate

143467981
458632: RNCC: 3 | RNVC: 2
5679104: RNCC: 5 | RNVC: 9

19 Jan 1978

5340-14-344-1829
Angle Bracket

143441829
16398113: RNCC: 3 | RNVC: 2
16398113: RNCC: 3 | RNVC: 9

10 Aug 1977

5340-14-376-1790
Mounting Plate

143761790
20232180: RNCC: 3 | RNVC: 2

30 Mar 1982

5340-14-542-2599
Mounting Bracket

145422599
890101408: RNCC: 3 | RNVC: 2
890101408: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-327-6212
Retaining Strap

143276212
0264752820: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-441-9189
Angle Bracket

144419189
E05800004: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-445-3945
Rod End Clevis

144453945
BLC238595: RNCC: 3 | RNVC: 2

13 Feb 1991

5340-14-394-3324
Access Cover

143943324
20068413: RNCC: 3 | RNVC: 2
20068413: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-501-6621
Access Cover

145016621
46230877: RNCC: 3 | RNVC: 2
46230877: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-488-6881
Access Cover

144886881
16212477: RNCC: 3 | RNVC: 2

28 May 1997

5340-14-417-4047
Access Cover

144174047
253583P03: RNCC: 3 | RNVC: 2
253583P03: RNCC: 5 | RNVC: 9

8 Jul 1987

5340-14-381-3579
Anchor Strap

143813579
B10020: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-544-7254
Mounting Bracket

145447254
61017288AA: RNCC: 3 | RNVC: 2

21 Feb 2005

5340-14-222-6111
Retaining Strap

142226111
DG7048: RNCC: 3 | RNVC: 9
DG7048A: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-568-2464
Utility Resilient Mount

145682464
533709: RNCC: 3 | RNVC: 2
PAULSTRADYN 130: RNCC: 5 | RNVC: 2
533709: RNCC: 5 | RNVC: 2

17 May 2011

5340-14-417-4059
Access Cover

144174059
969316P03: RNCC: 3 | RNVC: 2
969316P03: RNCC: 5 | RNVC: 9

8 Jul 1987

5340-14-390-3311
Bow Handle

143903311
59167061: RNCC: 3 | RNVC: 9

26 Jan 1984

5340-14-518-4955
Rod End Clevis

145184955
476 03555081: RNCC: 3 | RNVC: 9

9 Feb 2000

5340-14-369-9442
Webbing Strap

143699442
398002161200: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-515-3701
Mounting Plate

145153701
0419 7429: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-486-6282
Access Cover

144866282
45155474: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-14-494-4197
Access Cover

144944197
45279204: RNCC: 3 | RNVC: 2
45279204: RNCC: 3 | RNVC: 9
F300 0T 017 2979: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-497-2980
Mounting Plate

144972980
10092548: RNCC: 3 | RNVC: 2
F300 0T 022 9711: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-382-9245
Access Cover

143829245
4770201960: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-379-4077
Loop Clamp

143794077
1106836700: RNCC: 3 | RNVC: 2
68367: RNCC: 5 | RNVC: 2

1 Oct 1982

5340-14-380-4744
Access Cover

143804744
3132-350C605: RNCC: 3 | RNVC: 2

29 Nov 1982

5340-14-341-0335
Anchor Strap

143410335
83358: RNCC: 3 | RNVC: 2
83358: RNCC: 5 | RNVC: 9

16 Mar 1977

5340-14-422-1947
Access Cover

144221947
61006: RNCC: 3 | RNVC: 2
61006E: RNCC: 5 | RNVC: 2

24 Feb 1988

5340-14-256-7141
Rod End Clevis

142567141
H90A1146: RNCC: 3 | RNVC: 2
H90A1146: RNCC: 5 | RNVC: 2
530704: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-549-8218
Utility Access Door

145498218
2092685: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-407-3897
Access Cover

144073897
33823: RNCC: 3 | RNVC: 2

12 Feb 1986

5340-14-245-3397
Anchor Strap

142453397
79001271: RNCC: 3 | RNVC: 2
79001271: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-373-6084
Webbing Strap

143736084
136-174: RNCC: 3 | RNVC: 2

13 Nov 1981

5340-14-435-6682
Mounting Plate

144356682
16795295: RNCC: 3 | RNVC: 9

15 Nov 1989

5340-14-508-0797
Mounting Bracket

145080797
4773202110: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-549-0180
Mounting Bracket

145490180
82126373000: RNCC: 3 | RNVC: 2

1 Mar 2006

5340-14-500-6462
Section Block Clamp

145006462
E64009998012: RNCC: 3 | RNVC: 2
F300 0T 024 6648: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-472-4541
Mounting Bracket

144724541
DXX1110: RNCC: 3 | RNVC: 2

26 Oct 1994

5340-14-341-0814
Anchor Strap

143410814
16397513: RNCC: 3 | RNVC: 2
16397513: RNCC: 3 | RNVC: 9

16 Mar 1977

5340-14-304-2187
Angle Bracket

143042187
174093: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-275-7841
Access Cover

142757841
705106: RNCC: 3 | RNVC: 2
705106: RNCC: 5 | RNVC: 2
705106: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-517-0085
Bridge Clamp

145170085
RA1M794200811: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-312-1138
Rod End Clevis

143121138
158044: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-232-3686
Loop Clamp

142323686
200998: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-366-2790
Angle Bracket

143662790
A11A221160660: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-484-0538
Access Cover

144840538
794350: RNCC: 3 | RNVC: 2

17 Oct 1996

5340-14-443-2099
Metal Grille

144432099
2205110: RNCC: 3 | RNVC: 2

12 Nov 1990

5340-14-439-6893
Access Cover

144396893
16316578: RNCC: 3 | RNVC: 2
16316578: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-043-1542
Caster Frame

140431542
065U20-730279S: RNCC: 3 | RNVC: 2

10 Apr 1984

5340-14-366-4990
Friction Catch

143664990
525315: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-224-9064
Leaf Spring

142249064
0000286495: RNCC: 3 | RNVC: 2
0000286495: RNCC: 5 | RNVC: 9
286495: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-548-6844
Mounting Bracket

145486844
62253: RNCC: 3 | RNVC: 2
D04016W: RNCC: 5 | RNVC: 2

31 Jan 2006

5340-14-448-2454
Mounting Bracket

144482454
27110569-4: RNCC: 3 | RNVC: 2

18 Jun 1991

5340-14-350-4069
Retaining Band

143504069
213487: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-360-1879
Block Clamp

143601879
A11A704101160: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-549-3637
Bumper

145493637
FARD5 001 06 P 5548B: RNCC: 3 | RNVC: 2

27 Mar 2006

5340-14-500-5290
Mounting Plate

145005290
31426: RNCC: 3 | RNVC: 2
F300 0T 024 5463: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-548-0995
Angle Bracket

145480995
RA1M701966341: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-522-9623
Mounting Bracket

145229623
ST159-2M664P117: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-14-509-1410
Bumper

145091410
HV4301044: RNCC: 3 | RNVC: 2
SCM220NR60: RNCC: 5 | RNVC: 9

21 Oct 1998

5340-14-551-8144
Mounting Bracket

145518144
30003884: RNCC: 3 | RNVC: 2
AA000238: RNCC: 6 | RNVC: 9

26 Oct 2006

5340-14-438-5977
Mending Plate

144385977
TB1030415: RNCC: 3 | RNVC: 2

28 Mar 1990

5340-14-428-5654
Rod End Clevis

144285654
4607DME103-0002: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-503-1136
Retaining Strap

145031136
A29321-4R3: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-362-1730
Rod End Clevis

143621730
PR1-47351: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-341-7915
Anchor Strap

143417915
11526-04: RNCC: 3 | RNVC: 9

14 Apr 1977

5340-14-486-0431
Detent Plunger

144860431
429756: RNCC: 3 | RNVC: 2
429756-001: RNCC: 5 | RNVC: 9

26 Feb 1997

5340-14-303-3404
Access Cover

143033404
072864: RNCC: 3 | RNVC: 2
5824-11: RNCC: 5 | RNVC: 2
072864: RNCC: 5 | RNVC: 2
543178: RNCC: 5 | RNVC: 2
072864X: RNCC: 5 | RNVC: 9
72864: RNCC: 5 | RNVC: 9
CHN072864: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-531-8412
Mounting Bracket

145318412
330A61-1324-21: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-382-1868
Bumper

143821868
E1E705S42: RNCC: 3 | RNVC: 2
453-60010-000: RNCC: 5 | RNVC: 2
E1E 705 S42: RNCC: 5 | RNVC: 2
E1E705S42: RNCC: 5 | RNVC: 2
E1E705S42: RNCC: 5 | RNVC: 2
M334-01-10-20-23: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-475-2146
Plug Button

144752146
LBR532A201-521: RNCC: 3 | RNVC: 2

22 Mar 1995

5340-14-555-1403
Corner Brace

145551403
365A65-3249-00: RNCC: 3 | RNVC: 2

4 Oct 2007

5340-14-310-2351
Access Cover

143102351
NO PRIMARY REF14-310-2351: RNCC: 3 | RNVC: 2
034-27255: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-505-2012
Access Cover

145052012
5801392-10531: RNCC: 3 | RNVC: 2

13 Mar 1998

5340-14-541-8256
Access Cover

145418256
88179-1121: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-348-4669
Loop Clamp

143484669
CFCD1-25-38: RNCC: 3 | RNVC: 2
RSGU1100-38-25: RNCC: 5 | RNVC: 2

29 Mar 1978

5340-14-551-9562
Access Cover

145519562
MC201-215550-00: RNCC: 3 | RNVC: 2

13 Nov 2006

5340-14-287-9299
Angle Bracket

142879299
341A34-4014-21: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-264-1723
Loop Clamp

142641723
55218-340D507DB: RNCC: 3 | RNVC: 2
55218-340N: RNCC: 5 | RNVC: 2
55218-340-001DB: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-362-4366
Retaining Band

143624366
103435-01: RNCC: 3 | RNVC: 2
103435-01: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-397-8787
Plug Button

143978787
950-061: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-343-6262
Angle Bracket

143436262
330A22-2013-35: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-473-8432
Angle Bracket

144738432
332A72-1658-20: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-433-2823
Mounting Bracket

144332823
160H752553-01: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-14-409-6686
Retaining Strap

144096686
R4P706-509: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-452-1503
Corner Brace

144521503
60290-02-06-06: RNCC: 3 | RNVC: 2

18 Dec 1991

5340-14-464-0456
Cable Retractor

144640456
NO PRIMARY REF14-464-0456: RNCC: 3 | RNVC: 2
1391M321: RNCC: 5 | RNVC: 2

12 Jul 1993

5340-14-271-0238
Mounting Plate

142710238
3160S82-20-102: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-303-7566
Key Blank

143037566
75-FPG-90: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-541-4827
Access Cover

145414827
88179-2134: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-392-2324
Mounting Plate

143922324
6502-07: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-031-8749
Bumper

140318749
M376-222104: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-532-6495
Plug Button

145326495
692 201 409 001: RNCC: 3 | RNVC: 2
4112-501-002: RNCC: 5 | RNVC: 2

26 Nov 2002

5340-14-486-3844
Access Cover

144863844
620-176-646-0: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-308-9748
Retaining Strap

143089748
NO PRIMARY REF14-308-9748: RNCC: 3 | RNVC: 2
620-855-728-0: RNCC: 5 | RNVC: 2
620-855-728-0: RNCC: 5 | RNVC: 2
33107: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-403-9989
Butt Hinge

144039989
39224451: RNCC: 3 | RNVC: 2
39224451: RNCC: 5 | RNVC: 9

11 Sep 1985

5340-14-448-9542
Anchor Strap

144489542
5000919489: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-14-464-6429
Lever Bracket

144646429
81420638: RNCC: 3 | RNVC: 2

18 Aug 1993

Load More Results