What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 77 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 77 of 446

5340-14-495-6833
Access Cover

144956833
E20612: RNCC: 3 | RNVC: 2
F300 0T 019 6254: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-512-7513
Plug Button

145127513
800041117: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-405-4118
Bridge Clamp

144054118
ETRIERDIA100: RNCC: 3 | RNVC: 9
91540604: RNCC: 5 | RNVC: 2
91540604: RNCC: 5 | RNVC: 2

24 Sep 1997

5340-14-392-9832
Access Cover

143929832
0003563610: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-400-5854
Control Rod

144005854
870008062507: RNCC: 3 | RNVC: 2
8062507: RNCC: 5 | RNVC: 2

8 May 1985

5340-14-401-2589
Rod End Clevis

144012589
222771: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-507-1179
Access Cover

145071179
5010090706: RNCC: 3 | RNVC: 2

15 Jun 1998

5340-14-457-2011
Angle Bracket

144572011
1501221: RNCC: 3 | RNVC: 2

13 Aug 1992

5340-14-449-8106
Shimmy Damper

144498106
786025: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-14-532-0115
Mounting Bracket

145320115
J00004956I: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-532-0593
Cover Strip

145320593
00-250-556: RNCC: 3 | RNVC: 2
SZ00.250.556: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-382-2387
Angle Bracket

143822387
A11A222360010: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-223-2034
Access Cover

142232034
700211: RNCC: 3 | RNVC: 9
062059506: RNCC: 5 | RNVC: 9
59506: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-513-5616
Access Cover

145135616
DE11448: RNCC: 3 | RNVC: 2

24 Mar 1999

5340-14-546-6930
Mounting Bracket

145466930
5010604486: RNCC: 3 | RNVC: 2

2 Aug 2005

5340-14-295-2772
Mending Plate

142952772
153408: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-542-0994
Loop Clamp

145420994
219901100: RNCC: 3 | RNVC: 2
21T11: RNCC: 5 | RNVC: 2

2 Jul 2004

5340-14-346-1508
Access Cover

143461508
422806: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-504-0253
Access Cover

145040253
45025745: RNCC: 3 | RNVC: 2
45025745: RNCC: 3 | RNVC: 9

4 Feb 1998

5340-14-521-7802
Mounting Bracket

145217802
C62215: RNCC: 3 | RNVC: 2
D54671: RNCC: 3 | RNVC: 2

13 Sep 2000

5340-14-417-6564
Angle Bracket

144176564
M4Z0121907002: RNCC: 3 | RNVC: 2

22 Jul 1987

5340-14-443-0928
Cover Strip

144430928
DA1N202732861: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-14-521-6789
Butt Hinge

145216789
991116: RNCC: 3 | RNVC: 2

4 Sep 2000

5340-14-520-3819
Mounting Bracket

145203819
46516850: RNCC: 3 | RNVC: 9

17 May 2000

5340-14-555-3208
Mounting Bracket

145553208
82116236000: RNCC: 3 | RNVC: 2

24 Oct 2007

5340-14-429-6709
Hand Crank Arm

144296709
032468C02TRA: RNCC: 3 | RNVC: 2
032468C: RNCC: 5 | RNVC: 2

8 Feb 1989

5340-14-441-1033
Access Cover

144411033
16766471: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-401-1124
Butt Hinge

144011124
608671: RNCC: 3 | RNVC: 2

29 May 1985

5340-14-355-2722
Anchor Strap

143552722
35186: RNCC: 3 | RNVC: 9

19 Mar 1979

5340-14-521-8801
Pipe Hanger

145218801
DLT058066: RNCC: 3 | RNVC: 2

20 Sep 2000

5340-14-482-6414
Mounting Bracket

144826414
51003: RNCC: 3 | RNVC: 2
7701021041: RNCC: 5 | RNVC: 2
51003: RNCC: 5 | RNVC: 9

18 Jul 1996

5340-14-471-5060
Utility Access Door

144715060
7524636: RNCC: 3 | RNVC: 2
0C07524636: RNCC: 5 | RNVC: 2
5010099239: RNCC: 5 | RNVC: 2

31 Aug 1994

5340-14-556-6412
Utility Access Door

145566412
DA1S201762400A3: RNCC: 3 | RNVC: 2

29 Mar 2008

5340-14-477-6953
Access Cover

144776953
38017864: RNCC: 3 | RNVC: 2
38017864: RNCC: 5 | RNVC: 9

20 Sep 1995

5340-14-421-7566
Access Cover

144217566
39233895: RNCC: 3 | RNVC: 2
39233895: RNCC: 5 | RNVC: 9

27 Jan 1988

5340-14-434-0181
Butt Hinge

144340181
DV5094GAUCHE: RNCC: 3 | RNVC: 2

29 Aug 1989

5340-14-470-4065
Mounting Bracket

144704065
0390750630: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-555-3836
Mounting Bracket

145553836
19228168: RNCC: 3 | RNVC: 2

6 Nov 2007

5340-14-263-9226
Loop Clamp

142639226
51123105044: RNCC: 3 | RNVC: 2
25GE44: RNCC: 5 | RNVC: 2
24GE44: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-521-2964
Angle Bracket

145212964
10497946: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-556-1864
Mounting Bracket

145561864
82399849000: RNCC: 3 | RNVC: 2

11 Feb 2008

5340-14-263-5091
Loop Clamp

142635091
R112867: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-500-3808
Mounting Plate

145003808
D62102300007: RNCC: 3 | RNVC: 2
F300 0T 024 3909: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-551-9628
Bow Handle

145519628
0027596: RNCC: 3 | RNVC: 2

13 Nov 2006

5340-14-555-4163
Loop Clamp

145554163
78651RH43CG: RNCC: 1 | RNVC: 2
78651RH43CG: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-14-406-6758
Shelf Bracket

144066758
100676: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-546-3738
Mounting Bracket

145463738
5010248177: RNCC: 3 | RNVC: 2

28 Jun 2005

5340-14-520-3475
Loop Clamp

145203475
40153544: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-443-7474
Plate Spacer

144437474
20306220: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-14-539-7596
Access Cover

145397596
SZ09.704.739: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-14-352-7229
Angle Bracket

143527229
573898216: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-472-4925
Angle Bracket

144724925
320993: RNCC: 3 | RNVC: 2
320993: RNCC: 5 | RNVC: 9

26 Oct 1994

5340-14-379-7654
Retaining Strap

143797654
BAZ5159: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-452-3820
Block Clamp

144523820
11111556002: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-551-5082
Angle Bracket

145515082
RA1M702502761N1: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-031-3822
Bow Handle

140313822
A11B262100026U1: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-518-6296
Mounting Bracket

145186296
5010268030: RNCC: 3 | RNVC: 2
5010268030: RNCC: 3 | RNVC: 9

9 Feb 2000

5340-14-553-1792
Webbing Strap

145531792
WN001184000V2M0001: RNCC: 3 | RNVC: 2

12 Mar 2007

5340-14-553-3049
Mounting Bracket

145533049
T720G3002805: RNCC: 3 | RNVC: 2

22 Mar 2007

5340-14-478-1686
Retaining Bail

144781686
MAT162-0080F1: RNCC: 3 | RNVC: 2

11 Oct 1995

5340-14-442-0150
Rod End Clevis

144420150
702A10-0072-20: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-508-8126
Mounting Plate

145088126
AH40-09-2: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-14-305-6165
Butt Hinge

143056165
N416-11-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-327-8159
Lock-Release Lever

143278159
915-3-31-170: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-217-5722
Mounting Bracket

142175722
253-5M662P41A: RNCC: 3 | RNVC: 9
PA253-5M662P41A: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-321-9071
Mending Plate

143219071
544EL046-C-15: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-380-2557
Turnbuckle Body

143802557
TB30-17137-100: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-529-5762
Mounting Bracket

145295762
330A87-2976-02: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-435-9655
Bow Handle

144359655
332A25-1068-12: RNCC: 3 | RNVC: 2

29 Nov 1989

5340-14-371-3882
Tubular Fairlead

143713882
100SP7-0086: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-401-7364
Expansion Shield

144017364
64163-9HHDM5-19: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-281-3076
Loop Clamp

142813076
501-779-761-0: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-401-7311
Rod End Clevis

144017311
F262-44-02: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-530-0354
Access Cover

145300354
97032-1127: RNCC: 3 | RNVC: 2

30 Apr 2002

5340-14-522-9595
Loop Clamp

145229595
ST159-2M561P65: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-14-217-9210
Mounting Bracket

142179210
3160S28-11-070: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-558-2426
Utility Access Door

145582426
46504145: RNCC: 3 | RNVC: 2

15 Sep 2008

5340-14-553-9782
Angle Bracket

145539782
62C8681: RNCC: 3 | RNVC: 2

6 Jun 2007

5340-14-552-7671
Mounting Bracket

145527671
716918: RNCC: 3 | RNVC: 2

30 Jan 2007

5340-14-535-8488
Mounting Bracket

145358488
SUP 07: RNCC: 3 | RNVC: 2

25 Jun 2003

5340-14-552-4411
Access Cover

145524411
4655438A: RNCC: 3 | RNVC: 2

3 Jan 2007

5340-14-509-1563
Mounting Bracket

145091563
ND1431: RNCC: 3 | RNVC: 2
19701: RNCC: 5 | RNVC: 9

21 Oct 1998

5340-14-354-2429
Retaining Strap

143542429
16321357: RNCC: 3 | RNVC: 2
16321357: RNCC: 5 | RNVC: 9

30 Jan 1979

5340-14-365-1274
Access Cover

143651274
158233: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-14-515-1004
Access Cover

145151004
6414011: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-14-356-2655
Access Cover

143562655
16388415: RNCC: 3 | RNVC: 2
16388415: RNCC: 5 | RNVC: 9

25 Apr 1979

5340-14-439-1722
Access Cover

144391722
39065282: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-405-2662
Rod End Clevis

144052662
003069080P: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-483-5793
Access Cover

144835793
P109422H: RNCC: 3 | RNVC: 2

19 Sep 1996

5340-14-405-3266
Anchor Strap

144053266
4201703: RNCC: 3 | RNVC: 2
4201703: RNCC: 5 | RNVC: 9

27 Nov 1985

5340-14-293-2192
Plug Button

142932192
280633: RNCC: 3 | RNVC: 2
280633: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-377-5715
Loop Clamp

143775715
355487: RNCC: 3 | RNVC: 2
355487: RNCC: 5 | RNVC: 9

10 Jun 1982

5340-14-460-3186
Clamping Catch

144603186
TL800B-1: RNCC: 3 | RNVC: 2
TL805B1: RNCC: 3 | RNVC: 2

21 Jan 1993

5340-14-504-0679
Loop Clamp

145040679
120010: RNCC: 3 | RNVC: 2
0120 0010 010: RNCC: 5 | RNVC: 2
C.4-14-445: RNCC: 5 | RNVC: 2

5 Feb 1998

5340-14-476-4265
Flush Catch Claw

144764265
45463392: RNCC: 3 | RNVC: 2

14 Jun 1995

5340-14-350-5037
Strap Fastener Loop

143505037
306472: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-478-2840
Loop Clamp

144782840
213100950: RNCC: 3 | RNVC: 2
Z00.N7141381229: RNCC: 5 | RNVC: 2
21G9-5: RNCC: 5 | RNVC: 2

18 Oct 1995

5340-14-554-0664
Slide Keeper

145540664
299969-0: RNCC: 3 | RNVC: 2

8 Jun 2007

5340-14-469-7365
Rod End Connector

144697365
117787: RNCC: 3 | RNVC: 2

9 May 1994

5340-14-340-6906
Pipe Hanger

143406906
502-517-729-0: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-537-4863
Pin Removable Head

145374863
6501DME110007: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-408-0317
Angle Bracket

144080317
20724592-2: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-474-1570
Runner

144741570
225-3-80H: RNCC: 3 | RNVC: 2
0231022B00: RNCC: 5 | RNVC: 2

31 Jan 1995

5340-14-400-2615
Mounting Bracket

144002615
0301010830: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-447-4206
Bow Handle

144474206
NGS1E1306: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-467-1124
Angle Bracket

144671124
16662307: RNCC: 3 | RNVC: 2
16662307: RNCC: 5 | RNVC: 9

16 Dec 1993

5340-14-552-4155
Mounting Bracket

145524155
10637047001: RNCC: 3 | RNVC: 2

20 Dec 2006

5340-14-514-4666
Shelf Bracket

145144666
10472456: RNCC: 3 | RNVC: 2

26 May 1999

5340-14-560-7661
Utility Access Door

145607661
10694911000: RNCC: 3 | RNVC: 2

25 May 2009

5340-14-514-0480
Mounting Plate

145140480
RA1M122111381A1: RNCC: 3 | RNVC: 2

22 Apr 1999

5340-14-485-4751
Access Cover

144854751
787606: RNCC: 3 | RNVC: 2

27 Jan 1997

5340-14-472-9555
Cable Retractor

144729555
2297261: RNCC: 3 | RNVC: 2

23 Nov 1994

5340-14-296-8265
Angle Bracket

142968265
160868: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-470-8989
Mending Plate

144708989
M152AA18: RNCC: 3 | RNVC: 2
M152AA18: RNCC: 5 | RNVC: 9

13 Jul 1994

5340-14-321-4339
Strapping

143214339
BA5AG: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-357-8676
Access Cover

143578676
0000139614: RNCC: 3 | RNVC: 2
0000139614: RNCC: 5 | RNVC: 9
139614: RNCC: 5 | RNVC: 9

20 Jul 1979

5340-14-505-1295
Loop Clamp

145051295
161213: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-543-7450
Mounting Plate

145437450
3890499: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-14-332-1565
Loop Clamp

143321565
CV14GRIS: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-405-3416
Mending Plate

144053416
2083363: RNCC: 3 | RNVC: 2
2083363: RNCC: 5 | RNVC: 2
22383577: RNCC: 5 | RNVC: 2

27 Nov 1985

5340-14-539-3558
Blank Panel

145393558
AL100016: RNCC: 3 | RNVC: 2

7 Jan 2004

5340-14-333-2707
Access Cover

143332707
15166162: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-476-8262
Access Cover

144768262
46098543: RNCC: 3 | RNVC: 2

5 Jul 1995

5340-14-427-5723
Loop Clamp

144275723
303-994-501-0: RNCC: 3 | RNVC: 2

20 Oct 1988

5340-14-450-7456
Loop Clamp

144507456
SP-213-5-PP-DP-AS: RNCC: 3 | RNVC: 2

21 Oct 1991

5340-14-297-7106
Rod End Clevis

142977106
773-210-027FF36: RNCC: 3 | RNVC: 2
773-210-027FF36: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-290-5359
Angle Bracket

142905359
121E23-575-12-2: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-257-1477
Flush Catch Claw

142571477
330A25-2703-00: RNCC: 3 | RNVC: 2
330A25-2703-0000: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-432-8888
Loop Clamp

144328888
NO PRIMARY REF14-432-8888: RNCC: 3 | RNVC: 2
2-150225-6: RNCC: 5 | RNVC: 9

28 Jun 1989

5340-14-464-9439
Support Hook

144649439
9970-147-199: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-485-5700
Access Cover

144855700
332A58-0018-1051: RNCC: 3 | RNVC: 2

29 Jan 1997

5340-14-303-5039
Mending Plate

143035039
NO PRIMARY REF14-303-5039: RNCC: 3 | RNVC: 2
48-23-30-220: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-496-6887
Access Cover

144966887
IF184-015: RNCC: 3 | RNVC: 9
F300 0T 021 9150: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-315-8570
Vent Plug

143158570
9589-1-109860: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-041-5189
Loop Clamp

140415189
ASNA0021-11N16: RNCC: 1 | RNVC: 2
51300005016: RNCC: 3 | RNVC: 2
11N16: RNCC: 5 | RNVC: 2
A0021-11N16: RNCC: 5 | RNVC: 2
A0021-11N16: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-446-8528
Shelf Bracket

144468528
R262-15-2: RNCC: 3 | RNVC: 2

17 Apr 1991

5340-14-031-8787
Corner Brace

140318787
M375-243106: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-327-3330
Flush Catch Claw

143273330
F10A292001364: RNCC: 3 | RNVC: 2
85-688-5786: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-261-2681
Rod End Clevis

142612681
175-57-52: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-393-6320
Rim Lock Set

143936320
45NL9565-121: RNCC: 3 | RNVC: 2

7 Jun 1984

5340-14-521-4893
Plug Button

145214893
13530000/A: RNCC: 3 | RNVC: 2
13530000: RNCC: 5 | RNVC: 2

2 Aug 2000

5340-14-330-3381
Mending Plate

143303381
BT13-2-2-1: RNCC: 3 | RNVC: 2
IAC-B17035: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-552-1063
Mounting Plate

145521063
0064581820: RNCC: 3 | RNVC: 2

27 Nov 2006

5340-14-470-3462
Rim Lock Set

144703462
TL2006: RNCC: 3 | RNVC: 2
JOSTL2006: RNCC: 5 | RNVC: 9

15 Jun 1994

5340-14-564-6207
Utility Resilient Mount

145646207
MDS81Y507: RNCC: 3 | RNVC: 2

12 May 2010

5340-14-470-0529
Loop Clamp

144700529
SM621,3PPRDPAS: RNCC: 3 | RNVC: 2
RI SM6 621,3 PP DP AS: RNCC: 5 | RNVC: 2

26 May 1994

5340-14-476-0917
Tee Hinge

144760917
222-3018-344: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-470-1007
Pad Eye

144701007
202969: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-14-537-2243
Access Cover

145372243
788-4: RNCC: 3 | RNVC: 2

15 Oct 2003

5340-14-391-2776
Bumper

143912776
12683-6-170B: RNCC: 3 | RNVC: 9

1 Mar 1984

5340-14-484-9346
Friction Catch

144849346
7203: RNCC: 3 | RNVC: 2

12 Dec 1996

5340-14-540-6296
Mounting Plate

145406296
29161570-6: RNCC: 3 | RNVC: 2

10 Apr 2004

5340-14-550-7524
Pawl Fastener

145507524
61648604AA: RNCC: 3 | RNVC: 2

11 Jul 2006

5340-14-279-2237
Angle Bracket

142792237
31014: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-214-4260
Bumper

142144260
6634: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-448-1511
Loop Clamp

144481511
1031110047: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-450-5063
Retaining Band

144505063
325286: RNCC: 3 | RNVC: 2
325286: RNCC: 5 | RNVC: 9

9 Oct 1991

5340-14-338-6903
Leaf Spring

143386903
5000001584: RNCC: 3 | RNVC: 2
5000001584: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-535-9457
Lock Key

145359457
B30300: RNCC: 3 | RNVC: 2
DV098803: RNCC: 6 | RNVC: 9

2 Jul 2003

5340-14-554-8861
Loop Clamp

145548861
78651CT6CF: RNCC: 1 | RNVC: 2
78651CT6CF: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-555-4555
Mounting Bracket

145554555
T711A1002101: RNCC: 3 | RNVC: 2

19 Nov 2007

5340-14-544-0573
Mounting Bracket

145440573
06800169: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-14-549-3368
Clamping Catch

145493368
0462A01-01-02: RNCC: 3 | RNVC: 2

23 Mar 2006

5340-14-465-1635
Blank Panel

144651635
365A61-8200-12: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-010-0652
Loop Clamp

140100652
3130S85-21-087: RNCC: 3 | RNVC: 2

1 Jan 1961

5340-14-487-5587
Mounting Plate

144875587
78787-050B21F: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-455-7935
Vent Plug

144557935
A73746-71: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-372-1940
Access Cover

143721940
6254-30107: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-549-5106
Access Cover

145495106
MC201-925120-00: RNCC: 3 | RNVC: 2

11 Apr 2006

5340-14-498-2263
Rod End Clevis

144982263
E22451-120XC38: RNCC: 2 | RNVC: 2
91934410: RNCC: 3 | RNVC: 2
F300 0T 004 6152: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-319-8013
Pipe Hanger

143198013
121E52-308-04-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-422-7855
Mounting Bracket

144227855
NO PRIMARY REF14-422-7855: RNCC: 3 | RNVC: 2
91489525: RNCC: 5 | RNVC: 2
DE1GZ40: RNCC: 5 | RNVC: 9

17 Mar 1988

5340-14-464-1749
Rod End Clevis

144641749
2-64-01-03-270-37: RNCC: 3 | RNVC: 2

21 Jul 1993

5340-14-514-2364
Mounting Bracket

145142364
15272-1157-0: RNCC: 3 | RNVC: 2

3 May 1999

5340-14-277-1387
Mending Plate

142771387
42-1-08: RNCC: 3 | RNVC: 2
2586: RNCC: 5 | RNVC: 9
2586S: RNCC: 5 | RNVC: 9
42-1-08: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-431-4579
Retaining Strap

144314579
G230158-02: RNCC: 3 | RNVC: 2

19 Apr 1989

5340-14-536-9870
Mounting Plate

145369870
8057-02: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-415-2838
Rim Lock Set

144152838
NO PRIMARY REF14-415-2838: RNCC: 3 | RNVC: 2
1700-9: RNCC: 5 | RNVC: 9

28 Apr 1987

5340-14-288-7057
Rod End Clevis

142887057
D1054-7739: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-320-0947
Rod End Clevis

143200947
105-08-23: RNCC: 3 | RNVC: 2
105-08-23: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-522-6043
Mounting Bracket

145226043
3822A021: RNCC: 3 | RNVC: 2

8 Nov 2000

5340-14-460-0772
Mounting Bracket

144600772
PM1A725532201A1: RNCC: 3 | RNVC: 2
PM1A725532201A1: RNCC: 5 | RNVC: 2

7 Jan 1993

5340-14-305-2732
Runner

143052732
26252321: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-460-0781
Plate Spacer

144600781
PM1A725532519: RNCC: 3 | RNVC: 2
PM1A725532519: RNCC: 5 | RNVC: 2

7 Jan 1993

5340-14-433-8662
Mounting Plate

144338662
545964: RNCC: 3 | RNVC: 2

18 Aug 1989

5340-14-551-4229
Mounting Bracket

145514229
T212A2001224: RNCC: 3 | RNVC: 2

20 Sep 2006

5340-14-440-5378
Loop Clamp

144405378
45020: RNCC: 3 | RNVC: 2
45020: RNCC: 5 | RNVC: 2

17 Jul 1990

5340-14-520-5270
Mounting Bracket

145205270
46061978: RNCC: 3 | RNVC: 2
46061978: RNCC: 5 | RNVC: 9

22 May 2000

5340-14-551-2680
Angle Bracket

145512680
RA1A701126521: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-422-6346
Mounting Bracket

144226346
250526: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-14-501-1149
Loop Clamp

145011149
3616.095: RNCC: 3 | RNVC: 2
3616095: RNCC: 3 | RNVC: 2
F300 0T 025 1545: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-518-5925
Bridge Clamp

145185925
5005034018: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-397-4051
Rod End Connector

143974051
212312: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-500-8227
Mounting Plate

145008227
E64009998043: RNCC: 3 | RNVC: 2
F300 0T 024 8429: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-455-8672
Mounting Bracket

144558672
396422: RNCC: 3 | RNVC: 2
396422: RNCC: 5 | RNVC: 9

11 Jun 1992

5340-14-481-7791
Butt Hinge

144817791
T700A2512033102: RNCC: 3 | RNVC: 2

30 May 1996

5340-14-290-2112
Angle Bracket

142902112
0264301270: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-414-6948
Mending Plate

144146948
0608293300: RNCC: 3 | RNVC: 2

26 Feb 1987

5340-14-430-4030
Angle Bracket

144304030
5400198: RNCC: 3 | RNVC: 2
FOE5400198: RNCC: 5 | RNVC: 9

20 Mar 1989

5340-14-506-8662
Strapping

145068662
RB138: RNCC: 3 | RNVC: 2

27 May 1998

5340-14-550-9002
Mounting Bracket

145509002
10709913000: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-482-7225
Mounting Bracket

144827225
1098059P00: RNCC: 3 | RNVC: 2

25 Jul 1996

5340-14-551-7494
Mounting Bracket

145517494
RA1M709311241N1: RNCC: 3 | RNVC: 2

19 Oct 2006

5340-14-544-3381
Angle Bracket

145443381
82053151000: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-14-462-9009
Retaining Clip

144629009
1DM164962: RNCC: 3 | RNVC: 2
91714240: RNCC: 5 | RNVC: 2

5 May 1993

5340-14-468-0788
Blank Panel

144680788
LYN008055032120: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-549-8051
Detent Plunger

145498051
2092641: RNCC: 3 | RNVC: 2

15 May 2006

5340-14-545-6028
Section Block Clamp

145456028
09153200134: RNCC: 3 | RNVC: 2

25 Apr 2005

5340-14-523-4920
Cover Strip

145234920
01-250-407: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-14-525-6048
Mounting Bracket

145256048
10 146 604 1070: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-535-3773
Mounting Plate

145353773
5005027087: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-351-3220
Mending Plate

143513220
19309443: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-467-1123
Mounting Bracket

144671123
16662306: RNCC: 3 | RNVC: 2
16662306: RNCC: 5 | RNVC: 9

16 Dec 1993

5340-14-506-9244
Lock Bolt

145069244
458917: RNCC: 3 | RNVC: 2

27 May 1998

5340-14-499-6938
Mounting Bracket

144996938
029947B: RNCC: 3 | RNVC: 2
F300 0T 023 6797: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-508-8662
Mounting Bracket

145088662
128E387-00: RNCC: 3 | RNVC: 2
128E387-00: RNCC: 5 | RNVC: 9

2 Oct 1998

5340-14-465-1586
Compression Cup

144651586
365A54-1055-20: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-310-0151
Angle Bracket

143100151
255012: RNCC: 3 | RNVC: 2
26255012: RNCC: 3 | RNVC: 2
26255012: RNCC: 3 | RNVC: 9
255012: RNCC: 5 | RNVC: 9
85-667-9021: RNCC: 6 | RNVC: 9

1 Jan 1974

5340-14-396-2648
Angle Bracket

143962648
NO PRIMARY REF14-396-2648: RNCC: 3 | RNVC: 2
P4H016034-00: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-463-9892
Angle Bracket

144639892
REMDCHEGZLE-SERT-020044-45-46-48: RNCC: 3 | RNVC: 2

7 Jul 1993

5340-14-390-1371
Bow Handle

143901371
366A25-1190-00: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-536-3254
Mounting Bracket

145363254
D05/2299: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-14-300-9472
Rod End Clevis

143009472
341A91-0027-24: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-388-7450
Bumper

143887450
3511 168 04321: RNCC: 3 | RNVC: 2
3511 168 04321: RNCC: 5 | RNVC: 2
3511-168-04321: RNCC: 5 | RNVC: 2
3511-168-04321: RNCC: 5 | RNVC: 2
3511 168 04321: RNCC: 5 | RNVC: 2

3 Nov 1983

5340-14-324-8563
Angle Bracket

143248563
341A76-5032-22: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-541-5133
Metal Grille

145415133
1091380-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-466-1217
Snap Hook

144661217
REMDCHEGZLE-SERT-060063-6505: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-14-311-3531
Mending Plate

143113531
3511-210-00881: RNCC: 3 | RNVC: 2
SW31366: RNCC: 5 | RNVC: 2
3511 210 00881: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-336-2237
Rod End Clevis

143362237
3160S23-11-830RU: RNCC: 3 | RNVC: 2
85-662-1240: RNCC: 6 | RNVC: 9

24 Jul 1976

5340-14-335-7739
Retaining Strap

143357739
160-88834-09: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-511-1340
Cover Strip

145111340
F10A704006008: RNCC: 3 | RNVC: 2
85-694-3397: RNCC: 6 | RNVC: 9

2 Dec 1998

5340-14-514-9972
Mounting Plate

145149972
SA/CS33/20: RNCC: 3 | RNVC: 2

25 Jun 1999

5340-14-533-8807
Cover Strip

145338807
42-250-177: RNCC: 3 | RNVC: 2
SZ42.250.177: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-548-9713
Access Cover

145489713
21243567-00: RNCC: 3 | RNVC: 2

27 Feb 2006

5340-14-469-0327
Detent Plunger

144690327
301-150: RNCC: 3 | RNVC: 2
NLM301-150: RNCC: 5 | RNVC: 2

5 Apr 1994

5340-14-253-8821
Strap Hinge

142538821
LN331087-3221122: RNCC: 2 | RNVC: 2
LN331087-3221122: RNCC: 3 | RNVC: 2
32-211-22: RNCC: 5 | RNVC: 2
LN331087-3221122: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-461-2516
Mounting Plate

144612516
BC101A010-105: RNCC: 3 | RNVC: 9
0780724S00: RNCC: 5 | RNVC: 2

3 Mar 1993

5340-14-376-5324
Anchor Strap

143765324
NO PRIMARY REF14-376-5324: RNCC: 3 | RNVC: 2
404304826: RNCC: 5 | RNVC: 2
404304826: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-488-2256
Eye Hook

144882256
W3261115: RNCC: 3 | RNVC: 2
W32261-15: RNCC: 5 | RNVC: 2

23 Apr 1997

5340-14-398-2028
Pipe Hanger

143982028
304-030-401-0: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-332-9907
Angle Bracket

143329907
121B71-270-12-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-534-8690
Mounting Plate

145348690
23LLSWI23243607-NE5-25-60M3/H: RNCC: 3 | RNVC: 2
SYQ2586: RNCC: 5 | RNVC: 2

9 Apr 2003

5340-14-446-7648
Dashpot

144467648
954-2-11-180: RNCC: 3 | RNVC: 2

9 Apr 1991

5340-14-363-8571
Access Cover

143638571
0534-2: RNCC: 3 | RNVC: 2
0534-2M: RNCC: 5 | RNVC: 2
W07404-13: RNCC: 5 | RNVC: 2

7 Aug 1980

5340-14-393-0011
Angle Bracket

143930011
5000708328: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-14-434-8143
Bridge Clamp

144348143
8547RM: RNCC: 3 | RNVC: 9

4 Oct 1989

5340-14-458-9242
Angle Bracket

144589242
100A107457: RNCC: 3 | RNVC: 2

5 Nov 1992

5340-14-449-6393
Flush Catch Claw

144496393
644391: RNCC: 3 | RNVC: 2

28 Aug 1991

5340-14-551-4933
Angle Bracket

145514933
RA1M701964231: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-508-1336
Flush Catch Claw

145081336
10198946: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-525-7238
Mounting Plate

145257238
20 244 160 6310: RNCC: 3 | RNVC: 2
3 3-8G01 002 480: RNCC: 3 | RNVC: 9

14 Jun 2001

5340-14-526-9647
Mounting Bracket

145269647
10620432: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-521-7307
Mounting Bracket

145217307
010104019P: RNCC: 3 | RNVC: 2

12 Sep 2000

5340-14-505-3916
Key Chain And Reel

145053916
1140-12: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-526-6681
Mounting Bracket

145266681
AT26005521011: RNCC: 3 | RNVC: 2

20 Aug 2001

5340-14-517-2134
Loop Clamp

145172134
2106006005: RNCC: 3 | RNVC: 2
9560170950: RNCC: 5 | RNVC: 2

17 Nov 1999

5340-14-508-0953
Mounting Plate

145080953
F00140669: RNCC: 3 | RNVC: 2
F00140669: RNCC: 5 | RNVC: 9

26 Aug 1998

5340-14-538-3044
Lock Bolt

145383044
NGM0010035492457: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-416-0453
Retaining Strap

144160453
BJM01532: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-544-3561
Mounting Plate

145443561
S257A1018123: RNCC: 3 | RNVC: 2

24 Jan 2005

5340-14-488-2475
Leakproof Seal Plug

144882475
R43601REP4: RNCC: 3 | RNVC: 2

23 Apr 1997

5340-14-209-8529
Mounting Bracket

142098529
50678: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-530-7969
Lock Key

145307969
15510011: RNCC: 3 | RNVC: 2

4 Jul 2002

5340-14-553-2541
Bail Handle

145532541
462018: RNCC: 3 | RNVC: 2

19 Mar 2007

5340-14-548-1862
Mounting Bracket

145481862
69013032: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-14-361-2026
Mounting Plate

143612026
BAZ96823: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-517-1408
Bumper

145171408
T711A1005305: RNCC: 3 | RNVC: 2

10 Nov 1999

5340-14-264-2508
Loop Clamp

142642508
51113105034: RNCC: 3 | RNVC: 2
25G34: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-457-3797
Angle Bracket

144573797
ST159-2M361P204: RNCC: 3 | RNVC: 2

27 Aug 1992

5340-14-473-3810
Angle Bracket

144733810
332A24-0609-21: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-496-9496
Rod End Clevis

144969496
15148-06-06: RNCC: 3 | RNVC: 2
F300 0T 022 3080: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-416-1850
Bumper

144161850
M427-404301: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-465-6285
Arched Cushion

144656285
MAT169-0027F18DE27: RNCC: 3 | RNVC: 2

5 Oct 1993

5340-14-529-5780
Mounting Plate

145295780
330A87-3821-21: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-490-5555
Mounting Plate

144905555
J05085-04-0900P003: RNCC: 3 | RNVC: 2

2 Oct 1997

5340-14-384-0878
Bridge Clamp

143840878
NO PRIMARY REF14-384-0878: RNCC: 3 | RNVC: 2
709971: RNCC: 5 | RNVC: 9

4 May 1983

5340-14-419-3855
Lock-Release Lever

144193855
688-43185-02: RNCC: 3 | RNVC: 2

16 Oct 1987

5340-14-453-3575
Access Cover

144533575
3P0U32018-00: RNCC: 3 | RNVC: 2
3P0U32018-00: RNCC: 5 | RNVC: 9

19 Feb 1992

5340-14-265-6873
Loop Clamp

142656873
NO PRIMARY REF14-265-6873: RNCC: 3 | RNVC: 2
28-0016: RNCC: 5 | RNVC: 2
95110133: RNCC: 5 | RNVC: 2
28-0016: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-531-2066
Access Cover

145312066
3160S73-13-627: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-340-9155
Angle Bracket

143409155
321A58-0225-85: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-369-6209
Rod End Clevis

143696209
J00986-01-0700P008: RNCC: 3 | RNVC: 2
J00986-01-0700P008E: RNCC: 5 | RNVC: 2

17 Apr 1981

5340-14-514-4801
Access Cover

145144801
45219263: RNCC: 3 | RNVC: 2
45219263: RNCC: 5 | RNVC: 2
5010579479: RNCC: 5 | RNVC: 2
IF-192-0302: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-309-8271
Hook Handle

143098271
3511 950 41531: RNCC: 3 | RNVC: 2
3511-950-41531: RNCC: 5 | RNVC: 2
LG04153: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-467-7267
Loop Clamp

144677267
PE27010-12: RNCC: 3 | RNVC: 2

27 Jan 1994

5340-14-305-7922
Access Cover

143057922
773-417-131FF10: RNCC: 3 | RNVC: 2
773-417-131FF10: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-388-2153
Bridge Clamp

143882153
VTR501-2-35: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-369-1340
Mortise Latch

143691340
360A25-1248-00: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-354-5822
Angle Bracket

143545822
A10-32-175-03-0: RNCC: 3 | RNVC: 2
A10-32-175-03-0: RNCC: 5 | RNVC: 2
A10-32-175-03-0: RNCC: 5 | RNVC: 2
85-689-3610: RNCC: 6 | RNVC: 9

31 Jan 1979

5340-14-544-1149
Strap Fastener Loop

145441149
703A92-2110-21: RNCC: 3 | RNVC: 2

4 Jan 2005

5340-14-334-8866
Loop Clamp

143348866
880-57-0-055-0: RNCC: 3 | RNVC: 2
85-688-2968: RNCC: 6 | RNVC: 9

2 Jun 1976

5340-14-553-2380
Tee Hinge

145532380
SMC-S-22894-001-0: RNCC: 3 | RNVC: 2

16 Mar 2007

5340-14-473-6499
Flush Catch Claw

144736499
332A25-1121-01: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-446-1111
Mounting Bracket

144461111
ST406M71P85: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-550-5025
Mounting Plate

145505025
6601PAV100002: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-538-7711
Handwheel

145387711
NGM0011040318021: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-424-2217
Retaining Strap

144242217
543485: RNCC: 3 | RNVC: 2

19 May 1988

5340-14-463-6992
Lever Bracket

144636992
5973278: RNCC: 3 | RNVC: 2
5973278: RNCC: 5 | RNVC: 2

23 Jun 1993

5340-14-519-6012
Mounting Plate

145196012
C533A3202201: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-568-9849
Utility Resilient Mount

145689849
5828241038: RNCC: 1 | RNVC: 2
511625: RNCC: 3 | RNVC: 2

26 Jul 2011

5340-14-553-5258
Angle Bracket

145535258
20988700: RNCC: 3 | RNVC: 2
7420988700: RNCC: 5 | RNVC: 2

12 Apr 2007

5340-14-216-5504
Butt Hinge

142165504
291M501647: RNCC: 3 | RNVC: 2
291M501647: RNCC: 5 | RNVC: 2
M501647: RNCC: 5 | RNVC: 2

1 Jan 1965

5340-14-375-8166
Access Cover

143758166
16296868: RNCC: 3 | RNVC: 2
16296868: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-474-2374
Access Cover

144742374
1293-211D552: RNCC: 3 | RNVC: 2
1293-211D552: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-14-457-5799
Access Cover

144575799
5000749130: RNCC: 3 | RNVC: 2
89287831: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-404-7014
Access Cover

144047014
16690448: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-543-5709
Access Cover

145435709
S4575733: RNCC: 3 | RNVC: 2

23 Nov 2004

5340-14-507-6453
Access Cover

145076453
96183076: RNCC: 3 | RNVC: 2

7 Aug 1998

5340-14-472-4777
Angle Bracket

144724777
1083579M00: RNCC: 3 | RNVC: 2

26 Oct 1994

5340-14-259-7902
Mounting Bracket

142597902
70883020: RNCC: 3 | RNVC: 2
70883020: RNCC: 5 | RNVC: 9
883020: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-414-0526
Access Cover

144140526
96081731: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-548-8711
Angle Bracket

145488711
61398819AA: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-14-424-2850
Mounting Bracket

144242850
0185100630: RNCC: 3 | RNVC: 2
89414632: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-382-5026
Loop Clamp

143825026
045S03-576080A: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-466-8878
Lock-Release Lever

144668878
6202015052: RNCC: 3 | RNVC: 2
F300 0T 015 4918: RNCC: 5 | RNVC: 9

7 Dec 1993

5340-14-364-0799
Mounting Plate

143640799
0249920790: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-435-0581
Mending Plate

144350581
31730988: RNCC: 3 | RNVC: 9

17 Oct 1989

5340-14-311-3611
Webbing Strap

143113611
187671: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-393-3069
Runner

143933069
20857177: RNCC: 3 | RNVC: 2
20857177: RNCC: 3 | RNVC: 9

7 Apr 1984

5340-14-416-6816
Angle Bracket

144166816
412802070009: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-480-6906
Mounting Bracket

144806906
103-41-72-1: RNCC: 3 | RNVC: 2
103-41-72-1: RNCC: 3 | RNVC: 2

23 Mar 1996

5340-14-377-5705
Access Cover

143775705
355434: RNCC: 3 | RNVC: 2
355434: RNCC: 5 | RNVC: 9

10 Jun 1982

5340-14-417-4040
Retaining Strap

144174040
253200P03: RNCC: 3 | RNVC: 2
253200P03: RNCC: 5 | RNVC: 9

8 Jul 1987

5340-14-536-5341
Utility Access Door

145365341
19221862: RNCC: 3 | RNVC: 2

28 Aug 2003

5340-14-489-3193
Access Cover

144893193
10237230: RNCC: 3 | RNVC: 2

9 Jul 1997

5340-14-531-2981
Block Clamp

145312981
T882A4001213: RNCC: 3 | RNVC: 2

6 Aug 2002

5340-14-533-4069
Loop Clamp

145334069
5000785106: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-14-353-6834
Retaining Strap

143536834
501-440-622-0: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-353-2248
Clamping Catch

143532248
4192-311B505: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-271-9584
Quick Release Pin

142719584
NO PRIMARY REF14-271-9584: RNCC: 3 | RNVC: 2
AE13015: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-352-6547
Angle Bracket

143526547
M531-20022: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-403-7798
Angle Bracket

144037798
3511 130 54841: RNCC: 3 | RNVC: 2
3511-130-54841: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-278-3310
Pipe Hanger

142783310
160-11523-47: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-390-0116
Detent Plunger

143900116
365A57-1172-21Z: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-485-0617
Mounting Bracket

144850617
332A23-0475-0381: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-14-429-7739
Furniture Cup

144297739
NO PRIMARY REF14-429-7739: RNCC: 3 | RNVC: 2
1472630: RNCC: 5 | RNVC: 2

8 Feb 1989

5340-14-504-6362
Dashpot

145046362
189E557-00: RNCC: 3 | RNVC: 2
189E557-00: RNCC: 5 | RNVC: 9

25 Feb 1998

5340-14-388-9478
Rod End Clevis

143889478
ST159-2M664P129: RNCC: 3 | RNVC: 2
ST159-2M664P129B: RNCC: 5 | RNVC: 2

29 Nov 1983

5340-14-221-5843
Access Cover

142215843
G2-21E: RNCC: 3 | RNVC: 2
G2-21E: RNCC: 5 | RNVC: 2
G2-21E: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-237-5029
Rod End Clevis

142375029
321A20-0106-21: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-343-7775
Rod End Clevis

143437775
C21BA0201-014: RNCC: 3 | RNVC: 2
C21BA0201-014: RNCC: 5 | RNVC: 2
C21BA0201-014: RNCC: 5 | RNVC: 9
21BA0201-014: RNCC: 5 | RNVC: 9
C21BA0201-014: RNCC: 5 | RNVC: 9

13 Jul 1977

5340-14-303-5893
Rod End Clevis

143035893
83303-04: RNCC: 3 | RNVC: 2
N7134231304: RNCC: 5 | RNVC: 2
85-686-3673: RNCC: 6 | RNVC: 9

1 Jan 1973

5340-14-550-4829
Access Cover

145504829
A46447-91: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-420-1156
Plug Button

144201156
10016-050: RNCC: 3 | RNVC: 2

18 Nov 1987

5340-14-292-4820
Plug Button

142924820
F850-001: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-539-2487
Angle Bracket

145392487
21169197-00: RNCC: 3 | RNVC: 2
21169197-4: RNCC: 5 | RNVC: 2

17 Dec 2003

5340-14-333-7282
Access Cover

143337282
T20F16-004: RNCC: 3 | RNVC: 2
T20F16-004: RNCC: 3 | RNVC: 2
T20F16-004: RNCC: 5 | RNVC: 9

23 Apr 1976

5340-14-442-0492
Access Cover

144420492
11280/0037: RNCC: 3 | RNVC: 2
89470138: RNCC: 5 | RNVC: 2

26 Sep 1990

5340-14-476-0603
Access Cover

144760603
Z5-88-105P13: RNCC: 3 | RNVC: 2
0024-13-708-1955: RNCC: 6 | RNVC: 9

17 May 1995

5340-14-502-3801
Crank Handle

145023801
1-30/100-653: RNCC: 3 | RNVC: 9

9 Dec 1997

5340-14-527-7937
Cover Strip

145277937
305-731-300-6: RNCC: 3 | RNVC: 2
305-731-300-6: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-14-423-9107
Access Cover

144239107
5429-49: RNCC: 3 | RNVC: 2
4-013055: RNCC: 5 | RNVC: 2
5429-4900: RNCC: 5 | RNVC: 2

5 May 1988

5340-14-429-9637
Pawl Fastener

144299637
1274-92: RNCC: 3 | RNVC: 2
501356: RNCC: 3 | RNVC: 2
5041567: RNCC: 5 | RNVC: 9

21 Feb 1989

5340-14-437-8363
Mounting Plate

144378363
3005478: RNCC: 3 | RNVC: 2

21 Feb 1990

5340-14-474-3648
Mounting Bracket

144743648
GA72096: RNCC: 3 | RNVC: 2
GA72096: RNCC: 5 | RNVC: 2

13 Feb 1995

5340-14-551-3376
Pipe Hanger

145513376
RA1A704916071: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-331-6146
Bumper

143316146
233A043: RNCC: 3 | RNVC: 2
233A043: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-485-1662
Mounting Plate

144851662
20684289: RNCC: 3 | RNVC: 2

10 Jan 1997

5340-14-521-5038
Access Cover

145215038
420895: RNCC: 3 | RNVC: 2

2 Aug 2000

5340-14-346-2170
Webbing Strap

143462170
311013: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-516-3965
Lock Bolt

145163965
44091007: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-518-1721
Mounting Bracket

145181721
5010099724: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-530-2408
Mounting Plate

145302408
F00202036: RNCC: 3 | RNVC: 2
F00202036: RNCC: 5 | RNVC: 9

22 May 2002

5340-14-433-8461
Angle Bracket

144338461
023973N: RNCC: 3 | RNVC: 2

16 Aug 1989

5340-14-403-6800
Access Cover

144036800
79095999: RNCC: 3 | RNVC: 2
79095999: RNCC: 5 | RNVC: 9

21 Aug 1985

5340-14-550-7125
Access Cover

145507125
713639: RNCC: 3 | RNVC: 2

7 Jul 2006

5340-14-426-6721
Shelf Bracket

144266721
639101008: RNCC: 3 | RNVC: 2
89416243: RNCC: 5 | RNVC: 2
639101008: RNCC: 5 | RNVC: 9

15 Sep 1988

5340-14-544-7162
Utility Access Door

145447162
963134008: RNCC: 3 | RNVC: 2

18 Feb 2005

5340-14-401-3093
Retaining Strap

144013093
219821: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-466-3005
Mounting Bracket

144663005
A73066: RNCC: 3 | RNVC: 2

3 Nov 1993

5340-14-542-9092
Access Cover

145429092
61367292: RNCC: 3 | RNVC: 2

14 Aug 2004

5340-14-517-2635
Access Cover

145172635
39065694: RNCC: 3 | RNVC: 2

24 Nov 1999

5340-14-461-0880
Anchor Strap

144610880
LN400011F5REPG2: RNCC: 3 | RNVC: 2
RAB0587: RNCC: 5 | RNVC: 2

24 Feb 1993

5340-14-504-2265
Access Cover

145042265
3476198M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-488-2480
Leakproof Seal Plug

144882480
R43601REP9: RNCC: 3 | RNVC: 2

23 Apr 1997

5340-14-550-3364
Mounting Bracket

145503364
2716056940: RNCC: 3 | RNVC: 2

16 Jun 2006

5340-14-525-5775
Mounting Plate

145255775
10 146 010 1020: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-394-9265
Mounting Plate

143949265
29665212: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-466-7556
Swivel Caster

144667556
JSCV 1003 6153: RNCC: 3 | RNVC: 2
91729506: RNCC: 5 | RNVC: 2

24 Nov 1993

5340-14-543-9084
Snap Hook

145439084
M72: RNCC: 3 | RNVC: 2
OK M72 SL: RNCC: 5 | RNVC: 2

15 Dec 2004

5340-14-544-8310
Rigid Caster

145448310
60000133: RNCC: 3 | RNVC: 2

28 Feb 2005

5340-14-466-1851
Mounting Bracket

144661851
168725: RNCC: 3 | RNVC: 2
89170361: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-533-6683
Detent Plunger

145336683
F1261549: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-14-369-0636
Pipe Hanger

143690636
5828P: RNCC: 3 | RNVC: 9
5828: RNCC: 5 | RNVC: 9
5828: RNCC: 5 | RNVC: 9

17 Apr 1981

5340-14-445-9116
Butt Hinge

144459116
103734: RNCC: 3 | RNVC: 2
89411383: RNCC: 5 | RNVC: 2

27 Feb 1991

5340-14-334-4563
Mending Plate

143344563
192057: RNCC: 3 | RNVC: 2

1 Jun 1976

5340-14-413-1758
Retaining Strap

144131758
ST406M52P647: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-480-0605
Mounting Plate

144800605
10217558: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-527-7538
Mounting Plate

145277538
710346: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-14-500-8245
Section Block Clamp

145008245
E64009998091: RNCC: 3 | RNVC: 2
F300 0T 024 8447: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-439-5445
Anchor Strap

144395445
038465V: RNCC: 3 | RNVC: 2

14 May 1990

5340-14-528-5785
Access Cover

145285785
908582: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-405-2398
Clamping Catch

144052398
5445: RNCC: 3 | RNVC: 2
5445: RNCC: 5 | RNVC: 9

27 Nov 1985

5340-14-439-1995
Access Cover

144391995
16169116: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-359-0763
Anchor Strap

143590763
A11A221172103: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-485-9657
Access Cover

144859657
1035219E00: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-398-7937
Anchor Strap

143987937
0607404600: RNCC: 3 | RNVC: 2
0607404600: RNCC: 5 | RNVC: 9

20 Feb 1985

5340-14-356-2707
Anchor Strap

143562707
316: RNCC: 3 | RNVC: 2
316: RNCC: 5 | RNVC: 9

25 Apr 1979

5340-14-341-8010
Access Cover

143418010
32Y4: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-437-7884
Access Cover

144377884
3104586: RNCC: 3 | RNVC: 2
3104586: RNCC: 5 | RNVC: 2

20 Feb 1990

5340-14-291-5895
Locking Stay

142915895
4R013316: RNCC: 3 | RNVC: 2
4R013316: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-549-5556
Utility Access Door

145495556
EPIST0 E310051: RNCC: 3 | RNVC: 2

14 Apr 2006

5340-14-433-8457
Access Cover

144338457
023645Z: RNCC: 3 | RNVC: 2

16 Aug 1989

5340-14-452-8564
Access Cover

144528564
75450103: RNCC: 3 | RNVC: 2
5000808340: RNCC: 5 | RNVC: 2
E75450103: RNCC: 5 | RNVC: 9

22 Jan 1992

5340-14-521-3986
Mounting Plate

145213986
LYN007055021020: RNCC: 3 | RNVC: 2

26 Jul 2000

5340-14-495-9898
Loop Clamp

144959898
C050: RNCC: 3 | RNVC: 2
F300 0T 020 6934: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-536-3453
Butt Hinge

145363453
2450181: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-14-532-1680
Mounting Plate

145321680
5010559220: RNCC: 3 | RNVC: 2

16 Oct 2002

5340-14-551-3480
Angle Bracket

145513480
RA1M702446117: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-332-8338
Webbing Strap

143328338
120535: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-432-3896
Access Cover

144323896
548979: RNCC: 3 | RNVC: 2
00548979: RNCC: 5 | RNVC: 2

7 Jun 1989

5340-14-536-3216
Bumper

145363216
210107: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-14-433-0250
Angle Bracket

144330250
401336K: RNCC: 3 | RNVC: 2

5 Jul 1989

5340-14-521-7059
Mounting Bracket

145217059
160-888203: RNCC: 3 | RNVC: 2

6 Sep 2000

5340-14-031-8220
Bumper

140318220
5402587X: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-401-1928
Rim Latch

144011928
79109651: RNCC: 3 | RNVC: 2
79109651: RNCC: 5 | RNVC: 9

29 May 1985

5340-14-504-8644
Webbing Strap

145048644
5000739198: RNCC: 3 | RNVC: 2

6 Mar 1998

5340-14-357-2225
Loop Clamp

143572225
19306161: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-530-6915
Mounting Bracket

145306915
T537A1002107: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-554-3333
Mounting Bracket

145543333
82160909000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-274-4143
Rod End Clevis

142744143
A10-74-405-33-0: RNCC: 3 | RNVC: 2
A10-74-405-33-0: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-327-8640
Quick Release Pin

143278640
7-090-14-1355: RNCC: 3 | RNVC: 2
85-672-3010: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-484-2599
Rod End Connector

144842599
613-574-078-0: RNCC: 3 | RNVC: 2

31 Oct 1996

5340-14-324-8744
Rod End Clevis

143248744
330A87-2181-20: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-319-0156
Threaded Rod End

143190156
0RC5-41-04: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-440-3444
Angle Bracket

144403444
365A87-3032-21: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-480-6672
Access Cover

144806672
4423-009: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-420-5789
Expansion Shield

144205789
TIFIX-N16/65: RNCC: 3 | RNVC: 9

15 Dec 1987

5340-14-466-3541
Mounting Plate

144663541
LBR532A201-409: RNCC: 3 | RNVC: 2
85-695-1700: RNCC: 6 | RNVC: 9

3 Nov 1993

5340-14-464-2545
Utility Access Door

144642545
21117-188: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-394-2280
Handwheel

143942280
AS500-23: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-452-8825
Loop Clamp

144528825
RSGU1-13/15: RNCC: 3 | RNVC: 2
91720033: RNCC: 5 | RNVC: 2

22 Jan 1992

5340-14-473-3862
Mounting Plate

144733862
332A25-1376-20: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-309-1737
Access Cover

143091737
NO PRIMARY REF14-309-1737: RNCC: 3 | RNVC: 2
153127: RNCC: 5 | RNVC: 9
144219: RNCC: 5 | RNVC: 9
85-800-3818: RNCC: 6 | RNVC: 9

1 Jan 1974

5340-14-555-9163
Webbing Strap

145559163
263E466-00: RNCC: 3 | RNVC: 2

8 Jan 2008

5340-14-466-5697
Runner

144665697
052-201-01-02: RNCC: 3 | RNVC: 2

16 Nov 1993

5340-14-552-8477
Lock Bolt

145528477
4108-23: RNCC: 3 | RNVC: 2
614657: RNCC: 5 | RNVC: 2

7 Feb 2007

5340-14-338-3378
Handwheel

143383378
GSM137-013F15: RNCC: 3 | RNVC: 2
GSM137-13F15: RNCC: 5 | RNVC: 2

6 Nov 1976

5340-14-435-9907
Mounting Plate

144359907
078-40-106: RNCC: 3 | RNVC: 2

29 Nov 1989

5340-14-358-7137
Rod End Clevis

143587137
9401CRL102-00-15: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-230-6116
Expansion Plug

142306116
R93910-120AAT: RNCC: 2 | RNVC: 2
0948990047: RNCC: 3 | RNVC: 2
B0UCH0NCUVETTE12: RNCC: 3 | RNVC: 2
0854552400: RNCC: 5 | RNVC: 2
RCAA120T: RNCC: 5 | RNVC: 2
948990047: RNCC: 5 | RNVC: 9
0948990047: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-306-7621
Rod End Clevis

143067621
SM5-00-03-05: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-522-3166
Mounting Bracket

145223166
10444338: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-14-444-2415
Threaded Rod End

144442415
PM1A216450513: RNCC: 3 | RNVC: 2
PM1A216450513: RNCC: 5 | RNVC: 2

18 Dec 1990

5340-14-526-1121
Mounting Plate

145261121
20 242 160 7140: RNCC: 3 | RNVC: 2

4 Jul 2001

5340-14-374-6064
Retaining Strap

143746064
5000020147: RNCC: 3 | RNVC: 2
5000020147: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-551-5256
Access Cover

145515256
718388: RNCC: 3 | RNVC: 2

28 Sep 2006

5340-14-554-9126
Bow Handle

145549126
82117694000: RNCC: 3 | RNVC: 2

7 Sep 2007

5340-14-426-4662
Cover Strip

144264662
CJ98X130X80X1,5AG3: RNCC: 3 | RNVC: 2

1 Sep 1988

5340-14-551-3400
Bridge Clamp

145513400
RA1M709319751A1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-416-0440
Access Cover

144160440
BJM01420: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-305-7966
Access Cover

143057966
4085DET2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-472-2097
Access Cover

144722097
1076502A00: RNCC: 3 | RNVC: 2

12 Oct 1994

5340-14-426-2446
Mending Plate

144262446
412704030025: RNCC: 3 | RNVC: 2

10 Aug 1988

5340-14-353-6024
Clamping Catch

143536024
GO.24-ZB: RNCC: 3 | RNVC: 2
G024ZB: RNCC: 5 | RNVC: 2

16 Jan 1979

5340-14-482-9327
Angle Bracket

144829327
DA2C201701507: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-298-2944
Loop Clamp

142982944
CR13: RNCC: 3 | RNVC: 2
XD1RA2: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-363-3935
Loop Clamp

143633935
432161: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-14-447-2958
Mounting Bracket

144472958
F00099519: RNCC: 3 | RNVC: 2
F00099519: RNCC: 5 | RNVC: 9

15 May 1991

5340-14-512-5723
Angle Bracket

145125723
38621088: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-513-6978
Angle Bracket

145136978
702319: RNCC: 3 | RNVC: 2

7 Apr 1999

5340-14-515-6092
Detent Plunger

145156092
JS111804: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-547-0042
Angle Bracket

145470042
RA1M701626011A1N1: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-14-515-4718
Webbing Strap

145154718
SANGLE TEXT BARIOLEE: RNCC: 3 | RNVC: 2

15 Jul 1999

5340-14-339-3334
Retaining Strap

143393334
192731: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-397-9658
Angle Bracket

143979658
1118370: RNCC: 3 | RNVC: 2
1118370: RNCC: 5 | RNVC: 2

31 Jan 1985

5340-14-517-3394
Bumper

145173394
45679213: RNCC: 3 | RNVC: 2

2 Dec 1999

5340-14-238-9812
Retaining Strap

142389812
410573: RNCC: 3 | RNVC: 9
062410573: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-534-2929
Webbing Strap

145342929
10685049000: RNCC: 3 | RNVC: 2

19 Mar 2003

5340-14-401-2649
Webbing Strap

144012649
609912: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-481-3665
Mounting Bracket

144813665
10110225: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-282-6001
Mounting Bracket

142826001
0202127980: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-542-3455
Mounting Plate

145423455
10649949: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-14-544-5271
Mounting Bracket

145445271
21024347: RNCC: 3 | RNVC: 2

8 Feb 2005

5340-14-503-0756
Metal Grille

145030756
46246478: RNCC: 3 | RNVC: 2
46246478: RNCC: 5 | RNVC: 9

7 Jan 1998

5340-14-536-1282
Padlock

145361282
36402685: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-552-0554
Angle Bracket

145520554
0249920160: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-14-459-2233
Rod End Connector

144592233
PM1A196170003: RNCC: 3 | RNVC: 2
PM1A196170003: RNCC: 5 | RNVC: 2

19 Nov 1992

5340-14-434-5244
Clamp Bolt Assembly

144345244
A11A221200024: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-522-0108
Mounting Bracket

145220108
3M021949: RNCC: 3 | RNVC: 2

27 Sep 2000

5340-14-510-7886
Surface Bolt

145107886
R405VAK: RNCC: 3 | RNVC: 2
JOSR405VAK: RNCC: 5 | RNVC: 9

13 Nov 1998

5340-14-521-9609
Mounting Bracket

145219609
TPS1A1025C: RNCC: 3 | RNVC: 2

27 Sep 2000

5340-14-514-0467
Angle Bracket

145140467
RA1M112111351: RNCC: 3 | RNVC: 2

22 Apr 1999

5340-14-545-6902
Angle Bracket

145456902
RA1A703656221: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-419-5373
Retaining Clip

144195373
61540: RNCC: 3 | RNVC: 2

21 Oct 1987

5340-14-555-4125
Loop Clamp

145554125
78651RH21: RNCC: 1 | RNVC: 2
78651RH21: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-14-539-4738
Bridge Clamp

145394738
5001842443: RNCC: 3 | RNVC: 2

15 Jan 2004

5340-14-450-1710
Mounting Bracket

144501710
92PD260124: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-476-0905
Runner

144760905
222-3018-425: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-525-7538
Mounting Plate

145257538
04207336: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-399-9511
Expansion Plug

143999511
603618: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-525-6361
Loop Clamp

145256361
20 238 900 1800: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-554-8837
Loop Clamp

145548837
78651RH36CG: RNCC: 1 | RNVC: 2
78651RH36CG: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-489-5110
Lock-Release Lever

144895110
10235851: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-14-553-9636
Mounting Plate

145539636
82099505000: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-14-254-7764
Retaining Strap

142547764
52239: RNCC: 3 | RNVC: 9

1 Jan 1969

5340-14-354-2895
Bumper

143542895
531676: RNCC: 3 | RNVC: 2
00531676: RNCC: 5 | RNVC: 2

30 Jan 1979

5340-14-398-0336
Loop Clamp

143980336
618220: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-540-7053
Mounting Bracket

145407053
38010824: RNCC: 3 | RNVC: 2
5330 316462 11: RNCC: 5 | RNVC: 2
4848ZG8613180951: RNCC: 6 | RNVC: 9

21 Apr 2004

5340-14-514-9361
Section Block Clamp

145149361
RA1M703754135: RNCC: 3 | RNVC: 2

23 Jun 1999

Load More Results