What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 76 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 76 of 446

5340-14-301-5384
Butt Hinge

143015384
NO PRIMARY REF14-301-5384: RNCC: 3 | RNVC: 2
LI0B5: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-299-9865
Buckle

142999865
34228-032: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-416-3114
Bow Handle

144163114
182734: RNCC: 3 | RNVC: 2
182734: RNCC: 5 | RNVC: 9
85-693-1929: RNCC: 6 | RNVC: 9

3 Jun 1987

5340-14-389-5475
Mounting Bracket

143895475
365A87-3044-00: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-537-5204
Swivel Caster

145375204
TF4BD125-47R: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-469-6844
Pipe Hanger

144696844
78733-020-040: RNCC: 3 | RNVC: 2

4 May 1994

5340-14-534-0912
Synchro Clamp

145340912
330A85-0173-33: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-410-2753
Angle Bracket

144102753
0400-109-018: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-14-555-6281
Bumper

145556281
J10454-02-2200P017: RNCC: 3 | RNVC: 2

4 Dec 2007

5340-14-555-5670
Mounting Plate

145555670
332R87-1068-05: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-14-543-3661
Mounting Plate

145433661
213318: RNCC: 3 | RNVC: 2

23 Oct 2004

5340-14-458-6959
Blank Panel

144586959
16234408: RNCC: 3 | RNVC: 2

29 Oct 1992

5340-14-386-5228
Retaining Strap

143865228
052287: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-497-4239
Mounting Bracket

144974239
702591: RNCC: 3 | RNVC: 2

15 Oct 1997

5340-14-448-0289
Cover Strip

144480289
PM1A233126001: RNCC: 3 | RNVC: 2
PM1A233126001: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-041-1923
Control Rod

140411923
25927: RNCC: 3 | RNVC: 2
25927: RNCC: 5 | RNVC: 9
3432-03-50-9: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-256-5668
Loop Clamp

142565668
NO PRIMARY REF14-256-5668: RNCC: 3 | RNVC: 2
855565: RNCC: 5 | RNVC: 9
C855565: RNCC: 5 | RNVC: 9
C855565-3: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-383-1018
Loop Clamp

143831018
320-069-501-0: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-326-0028
Strap Fastener Loop

143260028
55061A: RNCC: 3 | RNVC: 2
85-686-8531: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-418-0980
Mounting Plate

144180980
23108812-6: RNCC: 3 | RNVC: 2
23108812: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-246-3852
Bumper

142463852
9877: RNCC: 3 | RNVC: 2
12410015: RNCC: 5 | RNVC: 2
12410015-3: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-486-2516
Threaded Rod End

144862516
282-1-O-102: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-444-5538
Mounting Bracket

144445538
ETD014055013620: RNCC: 3 | RNVC: 2

15 Jan 1991

5340-14-568-5869
Utility Resilient Mount

145685869
2077S72: RNCC: 3 | RNVC: 9

21 Jun 2011

5340-14-521-3582
Access Cover

145213582
1355055: RNCC: 3 | RNVC: 2

20 Jul 2000

5340-14-545-6056
Mounting Bracket

145456056
10612805: RNCC: 3 | RNVC: 2

25 Apr 2005

5340-14-515-2424
Loop Clamp

145152424
3535488800: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-503-8148
Access Cover

145038148
0288550180: RNCC: 3 | RNVC: 2

28 Jan 1998

5340-14-478-5019
Access Cover

144785019
29422805: RNCC: 3 | RNVC: 2

8 Nov 1995

5340-14-457-3616
Mounting Bracket

144573616
45056126: RNCC: 3 | RNVC: 2
45056126: RNCC: 5 | RNVC: 9

27 Aug 1992

5340-14-515-2835
Access Cover

145152835
0420 3369: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-408-6455
Rod End Clevis

144086455
160G732258: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-305-3426
Bumper

143053426
C0290E: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-525-2054
Plug Button

145252054
569028: RNCC: 3 | RNVC: 2
06370P006003: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-515-2290
Access Cover

145152290
0009644576: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-348-1899
Rod End Clevis

143481899
C47917: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-524-5163
Access Cover

145245163
STK00544: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-548-0799
Access Cover

145480799
20392874: RNCC: 3 | RNVC: 2

9 Dec 2005

5340-14-350-2879
Rod End Clevis

143502879
48486: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-544-3579
Mounting Bracket

145443579
AMPC ECHE E200303: RNCC: 3 | RNVC: 2

24 Jan 2005

5340-14-417-0838
Cushioning Pad

144170838
530316: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-14-553-9635
Mounting Plate

145539635
82099498000: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-14-484-1360
Retaining Strap

144841360
4348486: RNCC: 3 | RNVC: 2
4348486: RNCC: 5 | RNVC: 9

24 Oct 1996

5340-14-524-8091
Mounting Plate

145248091
2251280: RNCC: 3 | RNVC: 2
22511280: RNCC: 5 | RNVC: 9

18 Apr 2001

5340-14-454-0513
Loop Clamp

144540513
16425809: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-472-3821
Angle Bracket

144723821
PM1A718410102: RNCC: 3 | RNVC: 2
PM1A718410102: RNCC: 5 | RNVC: 2

19 Oct 1994

5340-14-539-5352
Cover Strip

145395352
SZ11.251.111: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-040-8603
Strap Hinge

140408603
160-61986: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-536-5677
Rim Latch

145365677
0B5813: RNCC: 3 | RNVC: 2

2 Sep 2003

5340-14-500-8194
Mounting Plate

145008194
E64009998121: RNCC: 3 | RNVC: 2
F300 0T 024 8396: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-478-2869
Bridge Clamp

144782869
CEPK332800028F13: RNCC: 2 | RNVC: 2

19 Oct 1995

5340-14-293-2304
Bumper

142932304
519186: RNCC: 3 | RNVC: 2
519186: RNCC: 5 | RNVC: 1

1 Jan 1973

5340-14-300-2762
Leaf Spring

143002762
A16334692: RNCC: 3 | RNVC: 2
16334692: RNCC: 3 | RNVC: 2
A16334692: RNCC: 3 | RNVC: 9
16334692: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-549-0902
Angle Bracket

145490902
RA1M701772201N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-547-7293
Mounting Bracket

145477293
8053239R00: RNCC: 3 | RNVC: 2

7 Nov 2005

5340-14-500-7073
Mounting Plate

145007073
E64009998032: RNCC: 3 | RNVC: 2
F300 0T 024 7265: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-544-8184
Synchro Clamp

145448184
X5576.012: RNCC: 3 | RNVC: 2

25 Feb 2005

5340-14-371-3795
Webbing Strap

143713795
003385210M: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-336-2951
Access Cover

143362951
466-7M97P213: RNCC: 3 | RNVC: 2
466-7M97P213: RNCC: 5 | RNVC: 2

24 Jul 1976

5340-14-467-0211
Access Cover

144670211
462068AB: RNCC: 3 | RNVC: 2

15 Dec 1993

5340-14-481-7059
Access Cover

144817059
45127548: RNCC: 3 | RNVC: 2
45127548: RNCC: 5 | RNVC: 2

25 May 1996

5340-14-528-5383
Mounting Bracket

145285383
5617514A: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-371-2654
Access Cover

143712654
11-548-600: RNCC: 3 | RNVC: 2
11-548-600: RNCC: 5 | RNVC: 9

5 Aug 1981

5340-14-549-2094
Door Hook

145492094
1SH41764307: RNCC: 3 | RNVC: 2

9 Mar 2006

5340-14-365-5617
Anchor Strap

143655617
A11A619001160: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-516-9363
Mounting Bracket

145169363
T212A2001124: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-555-4514
Utility Access Door

145554514
T711A1006158: RNCC: 3 | RNVC: 2

19 Nov 2007

5340-14-040-3519
Angle Bracket

140403519
NO PRIMARY REF14-040-3519: RNCC: 3 | RNVC: 2
S266099: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-529-2726
Bow Handle

145292726
900-045-4312: RNCC: 3 | RNVC: 2
4312: RNCC: 3 | RNVC: 9

20 Mar 2002

5340-14-549-8661
Mounting Bracket

145498661
2092496-001: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-473-8163
Mounting Bracket

144738163
332A23-0518-21: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-439-2473
Blank Panel

144392473
332A55-1057-20: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-217-3199
Loop Clamp

142173199
3160S21-15-040: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-530-9569
Retaining Strap

145309569
341A63-5041-01: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-14-549-9161
Mounting Plate

145499161
2092476-001: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-381-0734
Mounting Plate

143810734
0274603790: RNCC: 3 | RNVC: 2
302-144-001-0: RNCC: 5 | RNVC: 2

14 Dec 1982

5340-14-511-6248
Pipe Hanger

145116248
78733-032-035B: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-515-3795
Mounting Bracket

145153795
M90460-49: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-549-8659
Mounting Bracket

145498659
2092495-001: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-426-5052
Anchor Strap

144265052
697-15787-00-94: RNCC: 3 | RNVC: 2

6 Sep 1988

5340-14-485-0685
Mounting Bracket

144850685
332A41-0442-00: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-14-572-4219
Utility Access Door

145724219
0043110: RNCC: 3 | RNVC: 2
0043110: RNCC: 5 | RNVC: 9
43110: RNCC: 5 | RNVC: 9

3 Jul 2012

5340-14-533-5141
Angle Bracket

145335141
20393851: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-371-6353
Retaining Strap

143716353
MBEU60689: RNCC: 3 | RNVC: 2
033212: RNCC: 5 | RNVC: 2

5 Aug 1981

5340-14-500-3050
Mounting Bracket

145003050
10465869: RNCC: 3 | RNVC: 2
F300 0T 024 3136: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-278-4535
Retaining Strap

142784535
12504743: RNCC: 3 | RNVC: 2
12504743: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-396-9299
Doorknob

143969299
30B: RNCC: 3 | RNVC: 9

27 Nov 1984

5340-14-525-8116
Access Cover

145258116
H116213: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-532-3822
Mounting Bracket

145323822
RA1M812750121: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-526-9553
Mounting Plate

145269553
10605711: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-515-3743
Angle Bracket

145153743
0420 3898: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-457-0131
Mounting Plate

144570131
TC550: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-14-441-7656
Mounting Bracket

144417656
007724080P: RNCC: 3 | RNVC: 2

18 Sep 1990

5340-14-369-2966
Loop Clamp

143692966
51323105016: RNCC: 3 | RNVC: 2
21GE16: RNCC: 5 | RNVC: 2

17 Apr 1981

5340-14-483-3437
Mounting Bracket

144833437
P108566H: RNCC: 3 | RNVC: 2

5 Sep 1996

5340-14-369-7766
Angle Bracket

143697766
A11A221272201: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-371-3779
Mounting Plate

143713779
003161210M: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-374-0739
Angle Bracket

143740739
3160S23-11-166: RNCC: 3 | RNVC: 2
3160S-23-11.166: RNCC: 5 | RNVC: 2

8 Dec 1981

5340-14-540-8377
Mounting Bracket

145408377
19225623: RNCC: 3 | RNVC: 2

23 Apr 2004

5340-14-445-7244
Access Cover

144457244
BLC238744: RNCC: 3 | RNVC: 2

22 Feb 1991

5340-14-376-4583
Angle Bracket

143764583
16558224: RNCC: 3 | RNVC: 2
16558224: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-501-0513
Tubular Fairlead

145010513
31400425: RNCC: 3 | RNVC: 9
F300 0T 025 0816: RNCC: 5 | RNVC: 9

29 Oct 1997

5340-14-523-6450
Mounting Plate

145236450
D6024209: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-513-5612
Mounting Plate

145135612
DE11412: RNCC: 3 | RNVC: 2

24 Mar 1999

5340-14-515-2376
Angle Bracket

145152376
3534311304: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-386-0601
Bow Handle

143860601
493182: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-449-3226
Runner

144493226
574B005: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-363-1153
Retaining Strap

143631153
216387: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-14-544-3602
Mounting Bracket

145443602
S531A2091101: RNCC: 3 | RNVC: 2

24 Jan 2005

5340-14-533-7146
Snap Hook

145337146
MGO60: RNCC: 3 | RNVC: 2

19 Feb 2003

5340-14-319-4871
Threaded Rod End

143194871
DLT110119: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-539-5469
Cover Strip

145395469
SZ09.250.989: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-513-5603
Mounting Bracket

145135603
DE01237: RNCC: 3 | RNVC: 2

24 Mar 1999

5340-14-456-9663
Mounting Plate

144569663
747119: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-14-516-0793
Cushioning Pad

145160793
MB4202F00: RNCC: 3 | RNVC: 2

8 Sep 1999

5340-14-522-6009
Mounting Bracket

145226009
3621X011: RNCC: 3 | RNVC: 2

8 Nov 2000

5340-14-422-7905
Mounting Bracket

144227905
39232621: RNCC: 3 | RNVC: 2
39232621: RNCC: 5 | RNVC: 9

17 Mar 1988

5340-14-294-3448
Fusible Plug

142943448
285829: RNCC: 3 | RNVC: 2
285829: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-506-0402
Pipe Hanger

145060402
RA1M701772151: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-14-458-4951
Angle Bracket

144584951
43102030: RNCC: 3 | RNVC: 2
TKF43102030: RNCC: 5 | RNVC: 9
BTU4506: RNCC: 5 | RNVC: 9

23 Oct 1992

5340-14-518-7211
Loop Clamp

145187211
PM1A514100110: RNCC: 3 | RNVC: 2

16 Feb 2000

5340-14-339-7542
Bridge Clamp

143397542
HC4: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-426-5601
Runner

144265601
39534074: RNCC: 3 | RNVC: 2
39534074: RNCC: 5 | RNVC: 9

8 Sep 1988

5340-14-403-5233
Angle Bracket

144035233
5171695800: RNCC: 3 | RNVC: 2
716958: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-456-6064
Mounting Bracket

144566064
16295372: RNCC: 3 | RNVC: 2
16295372: RNCC: 5 | RNVC: 9

9 Jul 1992

5340-14-304-3508
Loop Clamp

143043508
09108000020: RNCC: 3 | RNVC: 2
91080: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-424-3011
Retaining Strap

144243011
39229606: RNCC: 3 | RNVC: 2
39229606: RNCC: 5 | RNVC: 9

19 May 1988

5340-14-523-9509
Mounting Bracket

145239509
47110750: RNCC: 3 | RNVC: 2
8023240T00: RNCC: 5 | RNVC: 2
47110750: RNCC: 5 | RNVC: 9

14 Feb 2001

5340-14-344-2670
Retaining Strap

143442670
205822: RNCC: 3 | RNVC: 2

10 Aug 1977

5340-14-482-8864
Mounting Plate

144828864
0U143445: RNCC: 3 | RNVC: 2
0U143445: RNCC: 5 | RNVC: 2
0U143445: RNCC: 5 | RNVC: 9

1 Aug 1996

5340-14-297-3732
Loop Clamp

142973732
15915026: RNCC: 3 | RNVC: 2
96062619: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-430-4372
Loop Clamp

144304372
AL2411: RNCC: 3 | RNVC: 2

22 Mar 1989

5340-14-554-6352
Roller Holder

145546352
EN000621: RNCC: 3 | RNVC: 2

27 Jul 2007

5340-14-466-1748
Retaining Strap

144661748
201815: RNCC: 3 | RNVC: 2
89170658: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-465-0572
Mounting Bracket

144650572
008537228P: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-298-8580
Angle Bracket

142988580
26248882: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-357-0468
Angle Bracket

143570468
388289: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-348-0710
Loop Clamp

143480710
52200005012: RNCC: 3 | RNVC: 2
100N12: RNCC: 5 | RNVC: 2

29 Mar 1978

5340-14-031-2934
Angle Bracket

140312934
217608: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-366-8204
Detent Plunger

143668204
970838: RNCC: 3 | RNVC: 2
970838: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-450-4892
Mounting Bracket

144504892
A1836: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-14-385-2435
Angle Bracket

143852435
30303448FAA: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-403-3237
Bail Handle

144033237
212000: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-516-1912
Loop Clamp

145161912
16283J: RNCC: 3 | RNVC: 2
0015155: RNCC: 3 | RNVC: 2

15 Sep 1999

5340-14-291-3943
Synchro Clamp

142913943
0235227130: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-445-5032
Retaining Strap

144455032
ST406M52P628: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-536-2418
Rim Lock Set

145362418
2803896: RNCC: 3 | RNVC: 2
SERRU00004: RNCC: 5 | RNVC: 2

22 Jul 2003

5340-14-322-3577
Angle Bracket

143223577
M426682: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-457-8548
Mounting Bracket

144578548
T392AA20: RNCC: 3 | RNVC: 2
T392AA20: RNCC: 5 | RNVC: 9
5046373: RNCC: 5 | RNVC: 9

24 Sep 1992

5340-14-503-2445
Bumper

145032445
45674105: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-541-3281
Mending Plate

145413281
387720: RNCC: 3 | RNVC: 2

27 May 2004

5340-14-536-5668
Mounting Plate

145365668
0B3884: RNCC: 3 | RNVC: 2

2 Sep 2003

5340-14-329-7612
Loop Clamp

143297612
21S0500602: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-442-1606
Retaining Clip

144421606
16275814: RNCC: 3 | RNVC: 2

3 Oct 1990

5340-14-461-6595
Split Tubular Clip

144616595
1045264X00: RNCC: 3 | RNVC: 2

19 Mar 1993

5340-14-302-1706
Angle Bracket

143021706
A10-75-423-15-0: RNCC: 3 | RNVC: 2
A10-75-423-15-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-205-9122
Rod End Clevis

142059122
253-5M366P65A: RNCC: 3 | RNVC: 9
PA253-5M366P65A: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-352-4137
Strap Fastener Loop

143524137
MB1076P: RNCC: 3 | RNVC: 2
MB1076P: RNCC: 5 | RNVC: 9
8895: RNCC: 5 | RNVC: 9
85-800-5668: RNCC: 6 | RNVC: 9

16 Oct 1978

5340-14-419-7037
Retaining Strap

144197037
M363-03471: RNCC: 3 | RNVC: 2

5 Nov 1987

5340-14-499-1423
Access Cover

144991423
E81438-21: RNCC: 3 | RNVC: 2
E8143821: RNCC: 5 | RNVC: 2
F300 0T 019 1565: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-472-7224
Mounting Bracket

144727224
408729: RNCC: 3 | RNVC: 2
408729-001: RNCC: 5 | RNVC: 9

9 Nov 1994

5340-14-419-0061
Control Rod

144190061
710020-20061+710020-21061: RNCC: 3 | RNVC: 2

28 Sep 1987

5340-14-552-6355
Cushioning Pad

145526355
ACS2-10-03: RNCC: 3 | RNVC: 2

18 Jan 2007

5340-14-416-7955
Metal Grille

144167955
JVA-T311-01-00: RNCC: 3 | RNVC: 2
JVAT311-01-00: RNCC: 5 | RNVC: 2

25 Jun 1987

5340-14-272-5830
Retaining Band

142725830
160-10188: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-542-9979
Access Cover

145429979
SH2759-03-10: RNCC: 3 | RNVC: 2

18 Aug 2004

5340-14-202-6030
Retaining Strap

142026030
Z100-010: RNCC: 3 | RNVC: 2
77564-312: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-546-0219
Mounting Bracket

145460219
CG132-2-2: RNCC: 3 | RNVC: 2

6 Jun 2005

5340-14-424-2601
Runner

144242601
0185700250: RNCC: 3 | RNVC: 2
89436489: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-395-5900
Shimmy Damper

143955900
5-1881B43152-677: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-578-4438
Utility Resilient Mount

145784438
SVSNGAGB00200/A: RNCC: 3 | RNVC: 2

2 Dec 2013

5340-14-499-6268
Loop Clamp

144996268
3630.156: RNCC: 3 | RNVC: 2
3630.156: RNCC: 3 | RNVC: 2
3630.156 9: RNCC: 5 | RNVC: 2
3630156: RNCC: 5 | RNVC: 2
F300 0T 023 6022: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-456-1942
Retaining Bail

144561942
MAT162-0097F1: RNCC: 3 | RNVC: 2

18 Jun 1992

5340-14-543-9925
Butt Hinge

145439925
SAFRA-COU230450BC: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-14-316-5149
Bumper

143165149
321A21-0370-08: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-532-3210
Utility Access Door

145323210
192E592-00: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-383-4229
Butt Hinge

143834229
NO PRIMARY REF14-383-4229: RNCC: 3 | RNVC: 2
16932333: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-454-8570
Rod End Connector

144548570
33245: RNCC: 3 | RNVC: 9
33245: RNCC: 5 | RNVC: 9

24 Apr 1992

5340-14-516-6221
Synchro Clamp

145166221
3160S73-76-092: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-14-445-2818
Detent Plunger

144452818
MAT175-0145F1: RNCC: 3 | RNVC: 2

6 Feb 1991

5340-14-551-8797
Mounting Bracket

145518797
43043185: RNCC: 3 | RNVC: 2
43043185: RNCC: 3 | RNVC: 9

6 Nov 2006

5340-14-504-2340
Mounting Bracket

145042340
3478329M91: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-286-5147
Angle Bracket

142865147
341A22-1020-29: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-453-6540
Mounting Plate

144536540
420-315-40-13E: RNCC: 3 | RNVC: 2

4 Mar 1992

5340-14-455-7004
Loop Clamp

144557004
510-205-38: RNCC: 3 | RNVC: 2
GR5: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-411-8843
Mounting Bracket

144118843
850204: RNCC: 3 | RNVC: 2
CHAPE COMMANDE ROBINET: RNCC: 5 | RNVC: 1

10 Sep 1986

5340-14-307-7014
Access Cover

143077014
95-200-029: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-472-9648
Corner Brace

144729648
3BM00841AAAA: RNCC: 3 | RNVC: 2
3BM00841AAAA: RNCC: 5 | RNVC: 9

23 Nov 1994

5340-14-382-3984
Doorstop

143823984
BFP00523: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-550-9240
Angle Bracket

145509240
RA1B701872121A1N1: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-519-6075
Mounting Plate

145196075
4542260: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-515-5125
Runner

145155125
5800271: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-559-4511
Utility Resilient Mount

145594511
UP160SB8: RNCC: 3 | RNVC: 2

14 Jan 2009

5340-14-549-3912
Retaining Strap

145493912
61228633AA: RNCC: 3 | RNVC: 2

29 Mar 2006

5340-14-444-6876
Synchro Clamp

144446876
925054: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-14-500-8075
Loop Clamp

145008075
E64700000009: RNCC: 3 | RNVC: 2
F300 0T 024 8275: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-475-0655
Bow Handle

144750655
79081838: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-480-8325
Access Cover

144808325
1302111P214: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-14-433-0243
Rim Lock Set

144330243
401280Y: RNCC: 3 | RNVC: 2

5 Jul 1989

5340-14-449-9553
Push Door Plate

144499553
0213200370: RNCC: 3 | RNVC: 2

18 Sep 1991

5340-14-407-2163
Retaining Strap

144072163
72611: RNCC: 3 | RNVC: 2

12 Feb 1986

5340-14-400-0137
Anchor Strap

144000137
BAZ2871: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-416-6878
Angle Bracket

144166878
413002020017: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-520-8966
Access Cover

145208966
TRAPP01909X00: RNCC: 3 | RNVC: 2

21 Jun 2000

5340-14-516-0795
Synchro Clamp

145160795
MB4223F00: RNCC: 3 | RNVC: 2

8 Sep 1999

5340-14-410-9058
Plug Button

144109058
M4HZ745P3407: RNCC: 3 | RNVC: 2

23 Jul 1986

5340-14-516-6003
Loop Clamp

145166003
51313113038: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-14-500-9590
Mounting Bracket

145009590
C69401100000: RNCC: 3 | RNVC: 2
F300 0T 024 9802: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-381-4936
Access Cover

143814936
129362: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-341-8166
Access Cover

143418166
714869: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-314-5350
Access Door Hinge

143145350
101821: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-512-5618
Bow Handle

145125618
K0083656: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-226-2316
Retaining Band

142262316
466P434: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-377-6599
Bridge Clamp

143776599
050A53-520827Y: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-529-4227
Bow Handle

145294227
6501DCC101: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-552-8446
Mounting Bracket

145528446
FA7B1 080 05 PVADBL0011000A: RNCC: 3 | RNVC: 2

7 Feb 2007

5340-14-525-9340
Mounting Bracket

145259340
038187: RNCC: 3 | RNVC: 2

20 Jun 2001

5340-14-528-5311
Mounting Bracket

145285311
45705860: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-529-0600
Retaining Strap

145290600
10545986: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-14-358-2500
Retaining Strap

143582500
5000496382: RNCC: 3 | RNVC: 2
5000496382: RNCC: 5 | RNVC: 9

13 Aug 1979

5340-14-415-4601
Angle Bracket

144154601
72457: RNCC: 3 | RNVC: 2

18 May 1987

5340-14-346-7226
Block Clamp

143467226
A11A704101190: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-382-4930
Loop Clamp

143824930
045S03-576104F: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-477-2131
Retaining Strap

144772131
RA1M210108311: RNCC: 3 | RNVC: 2

2 Aug 1995

5340-14-433-8658
Mounting Bracket

144338658
545971: RNCC: 3 | RNVC: 2

18 Aug 1989

5340-14-533-6733
Mounting Bracket

145336733
F1262891: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-14-450-7502
Loop Clamp

144507502
366052: RNCC: 3 | RNVC: 2

22 Oct 1991

5340-14-524-1619
Spring Holder

145241619
8028876L00: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-537-6169
Loop Clamp

145376169
LN313.5PA: RNCC: 3 | RNVC: 2

12 Nov 2003

5340-14-481-0484
Angle Bracket

144810484
34 56 21: RNCC: 3 | RNVC: 2

18 Apr 1996

5340-14-468-7383
Support Hook

144687383
PM1A711090210: RNCC: 3 | RNVC: 2
PM1A711090210: RNCC: 5 | RNVC: 2

16 Mar 1994

5340-14-552-7904
Mounting Plate

145527904
722476: RNCC: 3 | RNVC: 2

31 Jan 2007

5340-14-536-8685
Bail Handle

145368685
1150-U1: RNCC: 3 | RNVC: 2

17 Sep 2003

5340-14-553-0501
Mounting Bracket

145530501
RA1B703246527A3: RNCC: 3 | RNVC: 2

27 Feb 2007

5340-14-506-5821
Retaining Strap

145065821
NNP5340838309225: RNCC: 3 | RNVC: 9

29 Apr 1998

5340-14-553-1444
Mounting Plate

145531444
0249862300: RNCC: 3 | RNVC: 2

6 Mar 2007

5340-14-467-1120
Angle Bracket

144671120
16662302: RNCC: 3 | RNVC: 2
16662302: RNCC: 5 | RNVC: 9

16 Dec 1993

5340-14-504-4711
Mounting Bracket

145044711
TR95218: RNCC: 3 | RNVC: 2

18 Feb 1998

5340-14-430-7305
Threaded Rod End

144307305
PM1A761032004: RNCC: 3 | RNVC: 2
PM1A761032004: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-308-9312
Bail Handle

143089312
735201901230: RNCC: 3 | RNVC: 2
735219001230: RNCC: 5 | RNVC: 2
7352AZ: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-480-3912
Mounting Bracket

144803912
263254: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-396-5227
Angle Bracket

143965227
214007: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-510-2360
Access Cover

145102360
F232-27810M1RS2: RNCC: 3 | RNVC: 2
F232-27-810M1RS2: RNCC: 5 | RNVC: 2
1560AA8017071: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-459-6043
Mounting Plate

144596043
413120: RNCC: 3 | RNVC: 2
413-120: RNCC: 5 | RNVC: 2
91712180: RNCC: 5 | RNVC: 2

10 Dec 1992

5340-14-486-4950
Anchor Strap

144864950
B3723103: RNCC: 3 | RNVC: 2
B37231-03: RNCC: 5 | RNVC: 2
P37231-03B: RNCC: 5 | RNVC: 2

21 Mar 1997

5340-14-364-6412
Retaining Strap

143646412
NO PRIMARY REF14-364-6412: RNCC: 3 | RNVC: 2
0-00-802: RNCC: 5 | RNVC: 9
15791: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-485-0603
Mounting Bracket

144850603
332A22-0000-0483: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-14-486-1979
Anchor Strap

144861979
64674-5: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-389-4671
Rod End Clevis

143894671
365A58-1102-MA01: RNCC: 3 | RNVC: 2
365A58-1102MA01: RNCC: 5 | RNVC: 2

20 Dec 1983

5340-14-332-3684
Retaining Clip

143323684
611-107-125-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-463-3670
Mounting Bracket

144633670
16298027: RNCC: 1 | RNVC: 2
044H01-100006-0600: RNCC: 3 | RNVC: 2
0903172K00: RNCC: 5 | RNVC: 2
16298027: RNCC: 5 | RNVC: 9

9 Jun 1993

5340-14-517-4404
Access Cover

145174404
2095-301B515: RNCC: 3 | RNVC: 2
2095-301-515: RNCC: 5 | RNVC: 1
2095-301-515: RNCC: 5 | RNVC: 1
2095-301B515: RNCC: 5 | RNVC: 2

15 Dec 1999

5340-14-408-0742
Rod End Connector

144080742
38562: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-278-3781
Loop Clamp

142783781
156847: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-523-7024
Bow Handle

145237024
P8428271: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-487-6466
Synchro Clamp

144876466
51252: RNCC: 3 | RNVC: 2
211-7627: RNCC: 5 | RNVC: 2

18 Apr 1997

5340-14-272-5432
Bumper

142725432
513601: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-305-3452
Angle Bracket

143053452
26425432: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-417-5032
Pipe Hanger

144175032
DA1D287470060: RNCC: 3 | RNVC: 2

8 Jul 1987

5340-14-544-8499
Mounting Plate

145448499
XMLZL004: RNCC: 3 | RNVC: 2

1 Mar 2005

5340-14-330-1636
Lock-Release Lever

143301636
311MA0018BREP53: RNCC: 3 | RNVC: 2
311MA018BREP53: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-494-6150
Mounting Bracket

144946150
806 816 187: RNCC: 3 | RNVC: 2
F300 0T 017 5425: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-538-6510
Lock Bolt

145386510
NGM0010060186649: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-300-3350
Butt Hinge

143003350
15144214: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-453-8571
Webbing Strap

144538571
PAL01PD000025: RNCC: 3 | RNVC: 9

12 Mar 1992

5340-14-483-3704
Mounting Bracket

144833704
21768365: RNCC: 3 | RNVC: 2
21768365: RNCC: 3 | RNVC: 2

5 Sep 1996

5340-14-439-6716
Mounting Bracket

144396716
16296419: RNCC: 3 | RNVC: 2
16296419: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-322-0710
Retaining Band

143220710
83390: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-520-0855
Turnbuckle Body

145200855
RA1M216400801N2: RNCC: 3 | RNVC: 2

10 May 2000

5340-14-545-2469
Mounting Bracket

145452469
S212A20A1005: RNCC: 1 | RNVC: 2
DR1715C02: RNCC: 3 | RNVC: 2

29 Mar 2005

5340-14-222-6989
Loop Clamp

142226989
0000626397: RNCC: 3 | RNVC: 2
TID9498: RNCC: 5 | RNVC: 2
0000626397: RNCC: 5 | RNVC: 9
626397: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-433-9175
Mounting Plate

144339175
RP988738/2: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-14-549-6741
Access Cover

145496741
G-4456: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-14-446-5169
Bridge Clamp

144465169
39959489: RNCC: 3 | RNVC: 2
39959490: RNCC: 5 | RNVC: 2
39959489: RNCC: 5 | RNVC: 9

20 Mar 1991

5340-14-334-9514
Angle Bracket

143349514
419815: RNCC: 3 | RNVC: 2
419815: RNCC: 5 | RNVC: 2
419815: RNCC: 5 | RNVC: 9

2 Jun 1976

5340-14-515-7421
Mounting Plate

145157421
006Q576: RNCC: 3 | RNVC: 2
8016700P00: RNCC: 5 | RNVC: 2
006Q576: RNCC: 5 | RNVC: 9

28 Jul 1999

5340-14-329-5129
Angle Bracket

143295129
19983: RNCC: 3 | RNVC: 2
6481F: RNCC: 5 | RNVC: 2
01998377: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-481-5972
Eye Hook

144815972
C1-GAUCHELAITONPOLI: RNCC: 3 | RNVC: 2

16 May 1996

5340-14-545-6935
Angle Bracket

145456935
RA1M703556151A1: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-505-2033
Bridge Clamp

145052033
28X32 EP 14MM PATTE DROIT: RNCC: 3 | RNVC: 2

13 Mar 1998

5340-14-388-2423
Retaining Strap

143882423
T8002HD52AREP6: RNCC: 3 | RNVC: 2
T8002HD53AREP6: RNCC: 5 | RNVC: 2

12 Oct 1983

5340-14-448-6165
Mounting Plate

144486165
16982652: RNCC: 3 | RNVC: 2
16982652: RNCC: 5 | RNVC: 2

4 Jul 1991

5340-14-500-3835
Mounting Plate

145003835
D62102300020: RNCC: 3 | RNVC: 2
F300 0T 024 3936: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-488-6727
Retaining Band

144886727
3BT02177AAAA: RNCC: 3 | RNVC: 2
3BT02177AAAA: RNCC: 5 | RNVC: 9

28 May 1997

5340-14-330-4100
Angle Bracket

143304100
0915-517: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-522-1119
Mounting Bracket

145221119
4190062: RNCC: 3 | RNVC: 2
4190062: RNCC: 5 | RNVC: 2

4 Oct 2000

5340-14-363-8763
Swivel Caster

143638763
74145: RNCC: 3 | RNVC: 9

7 Aug 1980

5340-14-426-1242
Webbing Strap

144261242
39232475: RNCC: 3 | RNVC: 2
39232475: RNCC: 5 | RNVC: 9

4 Aug 1988

5340-14-381-3886
Lock-Release Lever

143813886
9439716: RNCC: 3 | RNVC: 2
29439716: RNCC: 5 | RNVC: 2
TKF9439716: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-266-2139
Angle Bracket

142662139
465156: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-417-6151
Doorknob

144176151
5086CHROMECARRE8MM: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-14-446-1427
Mounting Bracket

144461427
39959475: RNCC: 3 | RNVC: 2
39959475: RNCC: 5 | RNVC: 9

6 Mar 1991

5340-14-537-8463
Loop Clamp

145378463
EN2901P16W: RNCC: 2 | RNVC: 2

28 Nov 2003

5340-14-202-4480
Bow Handle

142024480
13164: RNCC: 3 | RNVC: 2
13164: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-14-548-1506
Mounting Plate

145481506
10603111: RNCC: 3 | RNVC: 2

12 Dec 2005

5340-14-407-7493
Loop Clamp

144077493
031902: RNCC: 3 | RNVC: 2
31902: RNCC: 5 | RNVC: 2
3245060319021: RNCC: 5 | RNVC: 2
5322152: RNCC: 5 | RNVC: 9
LG31902: RNCC: 5 | RNVC: 9

3 Mar 1986

5340-14-031-2372
Doorknob

140312372
400482: RNCC: 3 | RNVC: 2
MAF0001000103: RNCC: 6 | RNVC: 9

14 Jun 1980

5340-14-354-4282
Rigid Caster

143544282
517323: RNCC: 3 | RNVC: 2

31 Jan 1979

5340-14-359-1387
Block Clamp

143591387
A11A704103060: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-537-0475
Mounting Plate

145370475
712833: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-523-6823
Mounting Plate

145236823
K5220342: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-438-8364
Protection Bellows

144388364
TB1010510: RNCC: 3 | RNVC: 2

9 Apr 1990

5340-14-438-0362
Webbing Strap

144380362
5000988167: RNCC: 3 | RNVC: 2

7 Mar 1990

5340-14-396-5401
Retaining Strap

143965401
222919: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-311-4877
Pipe Hanger

143114877
0264308510: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-417-5324
Block Clamp

144175324
4047A444REP403: RNCC: 3 | RNVC: 2
502016: RNCC: 5 | RNVC: 2

8 Jul 1987

5340-14-550-9233
Angle Bracket

145509233
RA1B701832121N1: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-549-7646
Mounting Bracket

145497646
S521A1051260: RNCC: 3 | RNVC: 2

10 May 2006

5340-14-342-4609
Webbing Strap

143424609
ST406M75P555: RNCC: 3 | RNVC: 2

16 May 1977

5340-14-481-3648
Webbing Strap

144813648
10023675: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-518-3629
Mounting Bracket

145183629
10352517: RNCC: 3 | RNVC: 2

2 Feb 2000

5340-14-541-4642
Metal Grille

145414642
1SH41771386: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-502-6453
Loop Clamp

145026453
056-11100-20: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-253-4284
Mounting Bracket

142534284
321A27-0508-00: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-514-1880
Access Cover

145141880
19215-1451-0: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-14-519-5069
Mounting Bracket

145195069
456-01235-800: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-435-2417
Rim Lock

144352417
9135-64: RNCC: 3 | RNVC: 9
9558546580: RNCC: 5 | RNVC: 9

31 Oct 1989

5340-14-439-1999
Mounting Plate

144391999
1CRPP001-10: RNCC: 3 | RNVC: 2
29739622: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-236-0936
Pipe Hanger

142360936
160-61440-18: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-534-1047
Mounting Bracket

145341047
332A62-1186-01: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-311-4019
Angle Bracket

143114019
341A65-4161-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-486-2442
Access Cover

144862442
282-1-G-105: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-276-2592
Pipe Hanger

142762592
160-11522-16: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-495-2256
Mounting Bracket

144952256
NO PRIMARY REF14-495-2256: RNCC: 3 | RNVC: 2
20553: RNCC: 5 | RNVC: 9
F300 0T 018 6639: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-487-1216
Webbing Strap

144871216
8904-G7: RNCC: 3 | RNVC: 2
8904G7: RNCC: 5 | RNVC: 2
F300 0T 014 1943: RNCC: 6 | RNVC: 9

10 Apr 1997

5340-14-315-6581
Threaded Rod End

143156581
063-1737: RNCC: 3 | RNVC: 2
46737: RNCC: 5 | RNVC: 2
FOE063-1737: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-502-6344
Clamping Catch

145026344
GE40-2199CB: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-310-5996
Clamping Catch

143105996
70-15CADMIE: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-547-5614
Mounting Bracket

145475614
RA1M703816261A1: RNCC: 3 | RNVC: 2

16 Oct 2005

5340-14-490-2976
Mounting Bracket

144902976
J05085-03-0400P021: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-516-0456
Loop Clamp

145160456
PE27019RI8D: RNCC: 3 | RNVC: 2

7 Sep 1999

5340-14-473-1162
Synchro Clamp

144731162
20184-04: RNCC: 3 | RNVC: 9
1082172L00: RNCC: 5 | RNVC: 2

7 Dec 1994

5340-14-443-5920
Loop Clamp

144435920
6504030050: RNCC: 3 | RNVC: 2
9560117640: RNCC: 5 | RNVC: 2
71012-12: RNCC: 5 | RNVC: 9

28 Nov 1990

5340-14-488-4215
Loop Clamp

144884215
45304412: RNCC: 3 | RNVC: 2
4-530441-2: RNCC: 5 | RNVC: 2

7 May 1997

5340-14-464-8219
Lock-Release Lever

144648219
365A25-3194-05: RNCC: 3 | RNVC: 2

1 Sep 1993

5340-14-524-0235
Shelf Bracket

145240235
2423-07-01: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-14-214-7237
Retaining Strap

142147237
85804: RNCC: 3 | RNVC: 2
60068-03: RNCC: 3 | RNVC: 9

1 Jan 1965

5340-14-460-8700
Mounting Plate

144608700
J05791-02-1120P015: RNCC: 3 | RNVC: 2

10 Feb 1993

5340-14-572-5679
Utility Resilient Mount

145725679
BF45-45E25: RNCC: 3 | RNVC: 2

13 Jul 2012

5340-14-302-7952
Recess Handle

143027952
J36-162C0QUILLETYPE2ACIER: RNCC: 2 | RNVC: 2
RAR3422: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-540-5564
Bail Handle

145405564
GA024679Y00: RNCC: 3 | RNVC: 2

3 Apr 2004

5340-14-426-2476
Access Cover

144262476
413102050201: RNCC: 3 | RNVC: 2

10 Aug 1988

5340-14-461-4036
Retaining Strap

144614036
A80401: RNCC: 3 | RNVC: 2

10 Mar 1993

5340-14-439-5227
Webbing Strap

144395227
TB1030817: RNCC: 3 | RNVC: 2

11 May 1990

5340-14-551-2761
Mounting Bracket

145512761
RA1B701656804: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-347-8758
Plug Button

143478758
A32717: RNCC: 3 | RNVC: 2

1 Mar 1978

5340-14-551-9775
Blank Panel

145519775
82113094001: RNCC: 3 | RNVC: 2

15 Nov 2006

5340-14-502-7916
Access Cover

145027916
7T3535: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-398-8886
Access Cover

143988886
22382391: RNCC: 3 | RNVC: 2
22382391: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-249-9611
Mending Plate

142499611
0000271198: RNCC: 3 | RNVC: 2
271198: RNCC: 5 | RNVC: 9
0000271198: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-398-2860
Mounting Plate

143982860
29012528: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-380-1529
Anchor Strap

143801529
535762: RNCC: 3 | RNVC: 2
00535762: RNCC: 5 | RNVC: 2

8 Nov 1982

5340-14-529-3982
Access Cover

145293982
2605.102: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-519-4936
Mounting Bracket

145194936
10330810: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-320-2950
Access Cover

143202950
0064710890: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-404-6541
Access Cover

144046541
613473: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-407-7304
Rod End Clevis

144077304
21-26574REP10: RNCC: 3 | RNVC: 2
21-26574REP10: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-14-202-5864
Access Cover

142025864
0000123687: RNCC: 3 | RNVC: 2
123687: RNCC: 5 | RNVC: 9
0000123687: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-14-441-9154
Anchor Strap

144419154
D05800005: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-398-8099
Access Cover

143988099
7701016506: RNCC: 3 | RNVC: 2
1191676: RNCC: 5 | RNVC: 2
7701016506: RNCC: 5 | RNVC: 9

20 Feb 1985

5340-14-461-4663
Mounting Bracket

144614663
807964: RNCC: 3 | RNVC: 2

10 Mar 1993

5340-14-544-3555
Mounting Plate

145443555
S257A1012131: RNCC: 3 | RNVC: 2

24 Jan 2005

5340-14-548-9327
Corner Brace

145489327
10713979000: RNCC: 3 | RNVC: 2

23 Feb 2006

5340-14-454-8577
Mounting Bracket

144548577
49664: RNCC: 3 | RNVC: 9
49664: RNCC: 5 | RNVC: 9

24 Apr 1992

5340-14-400-2648
Mounting Bracket

144002648
0301027250: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-297-4572
Rim Lock Set

142974572
1501LAIT0NCAD: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-031-8387
Access Cover

140318387
VDP372504: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-314-4716
Doorstop

143144716
156368: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-552-0331
Access Cover

145520331
0064631170: RNCC: 3 | RNVC: 2

21 Nov 2006

5340-14-373-6669
Angle Bracket

143736669
091822: RNCC: 3 | RNVC: 2
091822G: RNCC: 5 | RNVC: 2

13 Nov 1981

5340-14-545-3909
Utility Access Door

145453909
0102174A: RNCC: 3 | RNVC: 2

11 Apr 2005

5340-14-537-7169
Loop Clamp

145377169
105N9: RNCC: 3 | RNVC: 2

19 Nov 2003

5340-14-466-3108
Mounting Plate

144663108
2206-311C521: RNCC: 3 | RNVC: 2

3 Nov 1993

5340-14-380-4631
Access Cover

143804631
535368: RNCC: 3 | RNVC: 2
00535368: RNCC: 5 | RNVC: 2

29 Nov 1982

5340-14-401-1059
Mending Plate

144011059
605361: RNCC: 3 | RNVC: 2

29 May 1985

5340-14-466-1491
Cushioning Pad

144661491
00122046: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-14-423-0466
Rod End Clevis

144230466
639200204: RNCC: 3 | RNVC: 2
89174137: RNCC: 5 | RNVC: 2
639200204: RNCC: 5 | RNVC: 9

31 Mar 1988

5340-14-533-1792
Access Cover

145331792
304-830: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-14-479-9605
Access Cover

144799605
0855617M00: RNCC: 3 | RNVC: 2

16 Feb 1996

5340-14-461-1248
Access Cover

144611248
39057367: RNCC: 3 | RNVC: 2
39057367: RNCC: 5 | RNVC: 2

24 Feb 1993

5340-14-539-9458
Rod End Clevis

145399458
J00010695: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-456-8928
Access Cover

144568928
1029738S00: RNCC: 3 | RNVC: 2

29 Jul 1992

5340-14-206-3151
Retaining Strap

142063151
0000352357: RNCC: 3 | RNVC: 2
0000352357: RNCC: 5 | RNVC: 9
352357: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-210-8158
Loop Clamp

142108158
793S: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-533-4574
Loop Clamp

145334574
HB25GE15: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-528-5160
Metal Grille

145285160
5206107A: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-505-7543
Cable Retractor

145057543
16391387: RNCC: 3 | RNVC: 9
16391387: RNCC: 5 | RNVC: 2

26 Mar 1998

5340-14-549-8319
Angle Bracket

145498319
2092576: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-504-2351
Butt Hinge

145042351
3478356M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-555-4176
Loop Clamp

145554176
78651RH8: RNCC: 1 | RNVC: 2
78651RH8: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-14-551-4837
Angle Bracket

145514837
718125: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-523-2158
Angle Bracket

145232158
RA1B702316250: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-422-9122
Armature Stop

144229122
ZF05953504: RNCC: 3 | RNVC: 2
5953504: RNCC: 5 | RNVC: 2
ZF05953504: RNCC: 5 | RNVC: 2

24 Mar 1988

5340-14-373-6553
Detent Plunger

143736553
BAZ97262: RNCC: 3 | RNVC: 2

13 Nov 1981

5340-14-441-4333
Butt Hinge

144414333
PM1A125710041U1: RNCC: 3 | RNVC: 2
PM1A125710041U1: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-14-539-2615
Mounting Plate

145392615
T632G3001225: RNCC: 3 | RNVC: 2

17 Dec 2003

5340-14-514-6341
Mounting Plate

145146341
70055P13: RNCC: 3 | RNVC: 2

3 Jun 1999

5340-14-555-4126
Loop Clamp

145554126
78652CT11CF: RNCC: 1 | RNVC: 2
78652CT11CF: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-14-448-0306
Angle Bracket

144480306
PM1A233222002: RNCC: 3 | RNVC: 2
PM1A233222002: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-257-8501
Mending Plate

142578501
26241880: RNCC: 3 | RNVC: 2
C241880: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-439-6783
Mounting Plate

144396783
16243371: RNCC: 3 | RNVC: 2

16 May 1990

5340-14-508-5368
Mounting Bracket

145085368
119A100337A: RNCC: 3 | RNVC: 2
118A100337A: RNCC: 3 | RNVC: 9

16 Sep 1998

5340-14-512-5665
Lock Bolt

145125665
S8576759: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-462-0062
Mounting Plate

144620062
D51604: RNCC: 3 | RNVC: 2
D51604: RNCC: 5 | RNVC: 2

31 Mar 1993

5340-14-508-4908
Mounting Bracket

145084908
10525631: RNCC: 3 | RNVC: 2

16 Sep 1998

5340-14-405-4378
Rim Lock Set

144054378
000314: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-503-0690
Retaining Strap

145030690
NO PRIMARY REF14-503-0690: RNCC: 3 | RNVC: 2
52572: RNCC: 5 | RNVC: 9

7 Jan 1998

5340-14-509-1588
Rod End Clevis

145091588
1822-122-024: RNCC: 3 | RNVC: 2
ND1428: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-477-7355
Lock-Release Lever

144777355
1405-137-000A: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-14-482-9287
Pipe Hanger

144829287
78732-040-042: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-233-3795
Rod End Clevis

142333795
3210-21010-512: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-510-0515
Loop Clamp

145100515
NO PRIMARY REF14-510-0515: RNCC: 3 | RNVC: 2
C5CF11229-29: RNCC: 5 | RNVC: 9
5340AA2060982: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-424-8712
Mounting Plate

144248712
355A32-2095-02: RNCC: 3 | RNVC: 2

9 Jun 1988

5340-14-281-1828
Retaining Strap

142811828
D1557-35094: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-271-0272
Angle Bracket

142710272
3160S87-30-033: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-381-3003
Rod End Clevis

143813003
SIT: RNCC: 3 | RNVC: 2
813555: RNCC: 5 | RNVC: 2
J34462-82: RNCC: 5 | RNVC: 2
795502: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-253-0265
Loop Clamp

142530265
SE3130S78-10-260C: RNCC: 3 | RNVC: 2
3130S78-10-260: RNCC: 3 | RNVC: 2
78-10-260C: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-386-5702
Retaining Strap

143865702
262-20-75060-65: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-400-0396
Mounting Bracket

144000396
030854: RNCC: 3 | RNVC: 2
30854: RNCC: 5 | RNVC: 2
3245060308544: RNCC: 5 | RNVC: 2
5226080: RNCC: 5 | RNVC: 9
LG30854: RNCC: 5 | RNVC: 9

24 Apr 1985

5340-14-374-6084
Anchor Strap

143746084
0031164343: RNCC: 3 | RNVC: 2
31164343: RNCC: 5 | RNVC: 9
0031164343: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-509-7448
Plug Button

145097448
56089471: RNCC: 3 | RNVC: 2

4 Nov 1998

5340-14-507-8728
Access Cover

145078728
47028793: RNCC: 3 | RNVC: 2

20 Aug 1998

5340-14-324-4350
Angle Bracket

143244350
0000139368: RNCC: 3 | RNVC: 2
0000139368: RNCC: 5 | RNVC: 9
30902858: RNCC: 5 | RNVC: 9
139368: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-441-1028
Access Cover

144411028
16766378: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-372-4412
Plug Button

143724412
MEC 10771: RNCC: 3 | RNVC: 2
31016: RNCC: 3 | RNVC: 9
39891: RNCC: 5 | RNVC: 9
39891: RNCC: 5 | RNVC: 9

1 Sep 1981

5340-14-520-2193
Access Cover

145202193
P500206: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-525-5776
Access Cover

145255776
10 146 010 1030: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-429-4825
Access Cover

144294825
565269: RNCC: 3 | RNVC: 2

25 Jan 1989

5340-14-530-2136
Access Cover

145302136
29074168: RNCC: 3 | RNVC: 2

22 May 2002

5340-14-546-4533
Lock-Release Lever

145464533
NO00092300: RNCC: 3 | RNVC: 2

6 Jul 2005

5340-14-462-1269
Loop Clamp

144621269
LN400018F11TYPE 11: RNCC: 3 | RNVC: 2
RAB0809: RNCC: 5 | RNVC: 2

6 Apr 1993

5340-14-485-6413
Angle Bracket

144856413
45691630: RNCC: 3 | RNVC: 2
45691630: RNCC: 5 | RNVC: 2

6 Feb 1997

5340-14-545-4679
Block Clamp

145454679
A11A704103080: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-508-3320
Mounting Plate

145083320
1031749P00: RNCC: 3 | RNVC: 2

4 Sep 1998

5340-14-385-3822
Pipe Hanger

143853822
0308850060: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-485-8313
Access Cover

144858313
27147367-0: RNCC: 3 | RNVC: 2
LF0230402: RNCC: 5 | RNVC: 2
27147367-0: RNCC: 5 | RNVC: 9

18 Feb 1997

5340-14-207-0259
Rod End Connector

142070259
0000130760: RNCC: 3 | RNVC: 2
0000130760: RNCC: 5 | RNVC: 9
130760: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-460-5298
Mounting Bracket

144605298
20322446: RNCC: 3 | RNVC: 2
20322446: RNCC: 5 | RNVC: 9

27 Jan 1993

5340-14-509-2613
Access Cover

145092613
0265707350: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-482-3995
Door Hook And Eye

144823995
ISO20NCAA04: RNCC: 3 | RNVC: 2
F0029220: RNCC: 5 | RNVC: 9

11 Jul 1996

5340-14-379-4187
Access Cover

143794187
061222903: RNCC: 3 | RNVC: 9

1 Oct 1982

5340-14-431-5297
Runner

144315297
DA2517: RNCC: 3 | RNVC: 2

24 Apr 1989

5340-14-311-8451
Access Cover

143118451
0064490590: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-439-1676
Bumper

144391676
6503707T: RNCC: 3 | RNVC: 9
89410752: RNCC: 5 | RNVC: 2
6503707T: RNCC: 5 | RNVC: 9
0027690X: RNCC: 5 | RNVC: 9

25 Apr 1990

5340-14-421-9211
Plug Button

144219211
C210N0IR: RNCC: 3 | RNVC: 2
88036418: RNCC: 5 | RNVC: 2

10 Feb 1988

5340-14-392-6781
Access Cover

143926781
211662: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-289-9538
Access Cover

142899538
02097020400: RNCC: 3 | RNVC: 2
020970204: RNCC: 5 | RNVC: 2
102125: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-512-5829
Angle Bracket

145125829
3BM02741AAAA: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-451-7879
Access Cover

144517879
B9999: RNCC: 3 | RNVC: 2

4 Dec 1991

5340-14-549-8780
Access Cover

145498780
2093251: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-400-2555
Access Cover

144002555
0174110010: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-227-1614
Rod End Clevis

142271614
STC156269: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-452-4427
Angle Bracket

144524427
DB1D203787421: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-362-4004
Anchor Strap

143624004
095026: RNCC: 3 | RNVC: 2
095026P: RNCC: 5 | RNVC: 2

19 Mar 1980

5340-14-407-7996
Pipe Hanger

144077996
0249937280: RNCC: 3 | RNVC: 2

5 Mar 1986

5340-14-519-1152
Access Cover

145191152
10011763: RNCC: 3 | RNVC: 2

8 Mar 2000

5340-14-505-2239
Access Cover

145052239
15167424: RNCC: 3 | RNVC: 2

13 Mar 1998

5340-14-457-6612
Webbing Strap

144576612
B3000-CAT5-LG10M: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-224-4181
Loop Clamp

142244181
251900650: RNCC: 3 | RNVC: 2
Z00.N7141381053: RNCC: 5 | RNVC: 2
25P6-5: RNCC: 5 | RNVC: 2
25P6,5: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-472-0447
Access Cover

144720447
4645843A: RNCC: 3 | RNVC: 2

5 Oct 1994

5340-14-480-2132
Access Cover

144802132
HB3393455: RNCC: 3 | RNVC: 2

28 Feb 1996

5340-14-392-8573
Anchor Strap

143928573
224972: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-481-4641
Access Cover

144814641
34 31 59: RNCC: 3 | RNVC: 2

8 May 1996

5340-14-416-6992
Access Cover

144166992
533940: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-381-3150
Access Cover

143813150
2206-441B511: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-552-8817
Access Cover

145528817
82176276000: RNCC: 3 | RNVC: 2

10 Feb 2007

5340-14-489-4405
Utility Access Door

144894405
20117-766: RNCC: 3 | RNVC: 2
20117-766: RNCC: 3 | RNVC: 2

23 Jul 1997

5340-14-370-7808
Access Cover

143707808
0000161660: RNCC: 3 | RNVC: 2
0000161660: RNCC: 5 | RNVC: 9
161660: RNCC: 5 | RNVC: 9

5 Jun 1981

5340-14-428-1165
Access Cover

144281165
000200071300: RNCC: 3 | RNVC: 2

1 Dec 1988

5340-14-505-8342
Access Cover

145058342
45607331: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-542-3998
Access Cover

145423998
01106: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-14-388-7151
Access Cover

143887151
215833A: RNCC: 3 | RNVC: 2
215833A: RNCC: 5 | RNVC: 2

3 Nov 1983

5340-14-411-1057
Access Cover

144111057
217010104: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-515-7530
Access Cover

145157530
89090600110159A: RNCC: 3 | RNVC: 2

28 Jul 1999

5340-14-481-9936
Access Cover

144819936
21 25 03: RNCC: 3 | RNVC: 2

13 Jun 1996

5340-14-448-0523
Access Cover

144480523
2625C03: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-511-6640
Access Cover

145116640
402H687: RNCC: 3 | RNVC: 2
402H687: RNCC: 5 | RNVC: 2

8 Jan 1999

5340-14-483-3708
Plug Button

144833708
21768353: RNCC: 3 | RNVC: 2
21768353: RNCC: 3 | RNVC: 2

5 Sep 1996

5340-14-382-2070
Access Cover

143822070
5516003358: RNCC: 3 | RNVC: 2
86003358: RNCC: 5 | RNVC: 2
5516003358: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-380-7937
Access Cover

143807937
20117189: RNCC: 3 | RNVC: 2

14 Dec 1982

5340-14-430-6565
Access Cover

144306565
705946: RNCC: 3 | RNVC: 2

22 Mar 1989

5340-14-524-8964
Angle Bracket

145248964
29492872: RNCC: 3 | RNVC: 2

25 Apr 2001

5340-14-342-4622
Access Cover

143424622
ST406M63AA21: RNCC: 3 | RNVC: 2

16 May 1977

5340-14-480-9247
Access Cover

144809247
22097191: RNCC: 3 | RNVC: 2
22097191: RNCC: 5 | RNVC: 9

11 Apr 1996

5340-14-371-3602
Anchor Strap

143713602
5000113501: RNCC: 3 | RNVC: 2
5000113501: RNCC: 5 | RNVC: 9

5 Aug 1981

5340-14-481-0518
Rod End Clevis

144810518
90 04 45: RNCC: 3 | RNVC: 2

18 Apr 1996

5340-14-455-9995
Access Cover

144559995
0280150017: RNCC: 3 | RNVC: 2
0280150017: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-473-4964
Access Cover

144734964
46158160: RNCC: 3 | RNVC: 2

31 Dec 1994

5340-14-532-1001
Angle Bracket

145321001
1SH41767221: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-420-1367
Rod End Clevis

144201367
DA2C220112001: RNCC: 3 | RNVC: 2

18 Nov 1987

5340-14-297-1265
Access Cover

142971265
79038745: RNCC: 3 | RNVC: 2
79038745: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-372-1325
Quick Release Pin

143721325
530001: RNCC: 3 | RNVC: 2
00530001: RNCC: 5 | RNVC: 2
521224GH: RNCC: 5 | RNVC: 2

1 Sep 1981

5340-14-504-2254
Access Cover

145042254
3476166M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-536-4187
Lock-Release Lever

145364187
T711A1001806: RNCC: 3 | RNVC: 2

5 Aug 2003

5340-14-463-3546
Access Cover

144633546
39581075: RNCC: 3 | RNVC: 2

9 Jun 1993

5340-14-402-0404
Anchor Strap

144020404
217165: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-508-7483
Access Cover

145087483
578705G4006: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-14-462-8946
Angle Bracket

144628946
576586: RNCC: 3 | RNVC: 2

5 May 1993

5340-14-526-2545
Access Cover

145262545
10607406: RNCC: 3 | RNVC: 2

11 Jul 2001

5340-14-445-3819
Rod End Clevis

144453819
BLC234017: RNCC: 3 | RNVC: 2

12 Feb 1991

Load More Results