What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 74 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 74 of 446

5340-14-457-6584
Webbing Strap

144576584
A500-CAT2-LG4M: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-485-6046
Mounting Bracket

144856046
EA2000: RNCC: 3 | RNVC: 2

4 Feb 1997

5340-14-418-3180
Angle Bracket

144183180
4-453707: RNCC: 3 | RNVC: 9
4-453707: RNCC: 5 | RNVC: 2
4-453707: RNCC: 5 | RNVC: 9

12 Aug 1987

5340-14-498-8799
Retaining Strap

144988799
D5965: RNCC: 3 | RNVC: 2
D 5965: RNCC: 5 | RNVC: 2
F300 0T 010 2228: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-285-5370
Quick Release Pin

142855370
81376: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-426-2297
Anchor Strap

144262297
23102363-3: RNCC: 3 | RNVC: 2

9 Aug 1988

5340-14-464-3446
Webbing Strap

144643446
EL57-3: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-384-0422
Rod End Connector

143840422
110424-9: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-479-8833
Access Cover

144798833
27138861-5: RNCC: 3 | RNVC: 2

12 Feb 1996

5340-14-484-1084
Rod End Connector

144841084
7700670539: RNCC: 3 | RNVC: 2

24 Oct 1996

5340-14-370-3563
Quick Release Pin

143703563
BLS5R12SF: RNCC: 3 | RNVC: 2
BLS5R12SF: RNCC: 5 | RNVC: 2
BLS5R12SF: RNCC: 5 | RNVC: 2

18 May 1981

5340-14-399-2967
Access Cover

143992967
2085-9: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-373-0262
Threaded Rod End

143730262
321A27-0320-20: RNCC: 3 | RNVC: 2
85-691-4606: RNCC: 6 | RNVC: 9

21 Sep 1981

5340-14-485-5832
Mounting Bracket

144855832
332A58-5070-21: RNCC: 3 | RNVC: 2

29 Jan 1997

5340-14-526-0519
Access Cover

145260519
A46447-83: RNCC: 3 | RNVC: 2

28 Jun 2001

5340-14-295-7146
Mending Plate

142957146
501702: RNCC: 3 | RNVC: 2
AP20-01: RNCC: 5 | RNVC: 2
AKP01-01: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-553-1356
Loop Clamp

145531356
ASNA0021-35S13: RNCC: 1 | RNVC: 2
511153050131: RNCC: 3 | RNVC: 2
355301302: RNCC: 5 | RNVC: 2
35S13: RNCC: 5 | RNVC: 2
HB35S13: RNCC: 5 | RNVC: 2
A0021-35S13: RNCC: 5 | RNVC: 2

6 Mar 2007

5340-14-403-7565
Loop Clamp

144037565
51123105050: RNCC: 3 | RNVC: 2
24GE50: RNCC: 5 | RNVC: 2
25GE50: RNCC: 5 | RNVC: 2
A0021-25GE50: RNCC: 5 | RNVC: 9

21 Aug 1985

5340-14-466-5094
Blank Panel

144665094
10021212: RNCC: 3 | RNVC: 2

15 Nov 1993

5340-14-533-1223
Mounting Plate

145331223
459-01703-000: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-14-403-5954
Angle Bracket

144035954
341A23-1030-22: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-316-5154
Bumper

143165154
321A21-0372-06: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-481-6113
Swivel Caster

144816113
1351-181PBRPF: RNCC: 3 | RNVC: 9
MPR1351-181PBRPF: RNCC: 5 | RNVC: 9

21 May 1996

5340-14-245-1545
Anchor Strap

142451545
70483402: RNCC: 3 | RNVC: 2
70483402: RNCC: 5 | RNVC: 9
483402: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-300-9560
Angle Bracket

143009560
341A91-2310-21: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-448-7117
Runner

144487117
A03037-10-2010P011: RNCC: 3 | RNVC: 2

4 Jul 1991

5340-14-439-3073
Loop Clamp

144393073
51311905065: RNCC: 3 | RNVC: 2
21P65: RNCC: 5 | RNVC: 2

25 Apr 1990

5340-14-438-8851
Angle Bracket

144388851
TB2030205: RNCC: 3 | RNVC: 2

11 Apr 1990

5340-14-526-2641
Access Cover

145262641
350A21-1325-0401: RNCC: 3 | RNVC: 2

11 Jul 2001

5340-14-041-7252
Mending Plate

140417252
95A12921: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-543-5752
Mounting Bracket

145435752
E0708G0D: RNCC: 1 | RNVC: 2
E0708G0D: RNCC: 3 | RNVC: 2

23 Nov 2004

5340-14-521-2812
Mounting Plate

145212812
F1261148: RNCC: 3 | RNVC: 2
F1261148: RNCC: 5 | RNVC: 2

19 Jul 2000

5340-14-507-9925
Butt Hinge

145079925
4773123600: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-509-1050
Angle Bracket

145091050
JVJT180007: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-523-3021
Webbing Strap

145233021
9001DAG1009: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-402-1019
Mending Plate

144021019
400451: RNCC: 3 | RNVC: 2
BGE400451: RNCC: 5 | RNVC: 2

26 Jun 1985

5340-14-422-4403
Mounting Bracket

144224403
152654: RNCC: 3 | RNVC: 2

3 Mar 1988

5340-14-551-3456
Angle Bracket

145513456
RA1M701666806: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-519-1390
Mounting Bracket

145191390
E14304005: RNCC: 3 | RNVC: 2
V14304005: RNCC: 5 | RNVC: 2

8 Mar 2000

5340-14-551-4964
Angle Bracket

145514964
RA1B705956431N1: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-458-3060
Angle Bracket

144583060
5000988252: RNCC: 3 | RNVC: 2

15 Oct 1992

5340-14-508-3111
Rim Lock Set

145083111
40660200: RNCC: 3 | RNVC: 2
40660200: RNCC: 5 | RNVC: 9

2 Sep 1998

5340-14-533-3967
Mounting Bracket

145333967
708010S000-71A: RNCC: 3 | RNVC: 2

3 Feb 2003

5340-14-423-9469
Retaining Strap

144239469
535864: RNCC: 3 | RNVC: 2

5 May 1988

5340-14-533-6236
Snap Hook

145336236
D105935B: RNCC: 3 | RNVC: 2

12 Feb 2003

5340-14-527-6150
Mounting Plate

145276150
COU001552012024: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-14-549-8107
Angle Bracket

145498107
961850118: RNCC: 3 | RNVC: 2

15 May 2006

5340-14-541-1635
Door Holder

145411635
25.37862GA: RNCC: 3 | RNVC: 2
250203F301: RNCC: 5 | RNVC: 2

14 May 2004

5340-14-485-6719
Mounting Bracket

144856719
A10A67-420-50-0: RNCC: 3 | RNVC: 2
A10A67-420-50-0: RNCC: 5 | RNVC: 2

6 Feb 1997

5340-14-513-1098
Section Block Clamp

145131098
F702-23-02: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-14-261-1555
Rod End Clevis

142611555
175-32-164: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-516-7628
Access Cover

145167628
452873: RNCC: 3 | RNVC: 2
452873-001: RNCC: 5 | RNVC: 9

13 Oct 1999

5340-14-478-1655
Mounting Bracket

144781655
321A75-0162-20: RNCC: 3 | RNVC: 2

11 Oct 1995

5340-14-399-0744
Bumper

143990744
NO PRIMARY REF14-399-0744: RNCC: 3 | RNVC: 2
21582-0: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-229-8294
Handwheel

142298294
GSM137-001F7DET6AVECB0ULEAS10G: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-365-9229
Synchro Clamp

143659229
S2684-1DG: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-210-4077
Mending Plate

142104077
42432054: RNCC: 3 | RNVC: 2
424-32054-000: RNCC: 5 | RNVC: 2
42432054: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-465-5015
Mounting Bracket

144655015
365A81-0030-02: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-464-9566
Cover Strip

144649566
365A25-0036-24: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-516-7528
Protection Bellows

145167528
032245L: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-14-277-7362
Mending Plate

142777362
C243984: RNCC: 3 | RNVC: 2
26243984: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-550-9220
Angle Bracket

145509220
RA1B702446041: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-490-1404
Threaded Rod End

144901404
GC529REP6: RNCC: 3 | RNVC: 2

17 Sep 1997

5340-14-510-7116
Retaining Strap

145107116
TEB086010004: RNCC: 3 | RNVC: 2

9 Nov 1998

5340-14-427-9590
Webbing Strap

144279590
168805: RNCC: 3 | RNVC: 2
89171297: RNCC: 5 | RNVC: 2

24 Nov 1988

5340-14-549-8855
Mounting Bracket

145498855
21106721: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-551-3514
Angle Bracket

145513514
RA1M706426131: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-317-2715
Retaining Strap

143172715
2187-800A564: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-503-5905
Mounting Plate

145035905
47029398: RNCC: 3 | RNVC: 2

21 Jan 1998

5340-14-542-3025
Mounting Plate

145423025
972978908: RNCC: 3 | RNVC: 2
972978908: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-548-6071
Angle Bracket

145486071
RA1B702346127: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-361-2035
Bumper

143612035
096870: RNCC: 3 | RNVC: 2
BAZ96870: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-413-9865
Rod End Clevis

144139865
BJM01171: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-500-9290
Section Block Clamp

145009290
E64009998119: RNCC: 3 | RNVC: 2
F300 0T 024 9502: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-406-1379
Anchor Strap

144061379
29217: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-348-6814
Mending Plate

143486814
225231: RNCC: 3 | RNVC: 2
225231: RNCC: 5 | RNVC: 9

19 Apr 1978

5340-14-433-9007
Mounting Plate

144339007
022701A: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-14-259-6485
Butt Hinge

142596485
49245: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-402-6028
Retaining Strap

144026028
400689: RNCC: 3 | RNVC: 2
BGE400689: RNCC: 5 | RNVC: 2

19 Jul 1985

5340-14-378-9642
Mending Plate

143789642
002895210S: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-458-1290
Angle Bracket

144581290
39470608: RNCC: 3 | RNVC: 2

8 Oct 1992

5340-14-416-7058
Bumper

144167058
534934: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-481-2591
Retaining Strap

144812591
10088859: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-14-231-0934
Loop Clamp

142310934
512131050162: RNCC: 3 | RNVC: 2
50G16: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-498-6796
Container Adapter

144986796
5000603427: RNCC: 3 | RNVC: 2
5000603427: RNCC: 5 | RNVC: 9
F300 0T 007 6462: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-521-5300
Crank Handle

145215300
4197849: RNCC: 3 | RNVC: 2
4197849: RNCC: 5 | RNVC: 9

9 Aug 2000

5340-14-504-7256
Bumper

145047256
5010146032: RNCC: 3 | RNVC: 2

2 Mar 1998

5340-14-339-5310
Handwheel

143395310
53040: RNCC: 3 | RNVC: 2
53040: RNCC: 5 | RNVC: 2

18 Jan 1977

5340-14-528-4972
Mounting Plate

145284972
4SH41596202: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-270-6041
Mounting Bracket

142706041
35214019A4: RNCC: 3 | RNVC: 2
35214019A4: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-478-7221
Loop Clamp

144787221
055W02-537131B: RNCC: 3 | RNVC: 2
0537131B00: RNCC: 5 | RNVC: 2

20 Nov 1995

5340-14-463-0238
Mounting Bracket

144630238
0000790519: RNCC: 3 | RNVC: 2

12 May 1993

5340-14-472-5382
Container Adapter

144725382
9301190013: RNCC: 3 | RNVC: 2

28 Oct 1994

5340-14-550-4654
Angle Bracket

145504654
RA1B701301171: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-416-0421
Shelf Bracket

144160421
BJM00572: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-376-7308
Pipe Hanger

143767308
304-029-601-0: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-508-7788
Access Cover

145087788
BS2842.23.00.000: RNCC: 3 | RNVC: 2
BS2842-23-00-000: RNCC: 5 | RNVC: 9

30 Sep 1998

5340-14-501-4435
Pipe Hanger

145014435
436525: RNCC: 3 | RNVC: 2
436525-001: RNCC: 5 | RNVC: 9

29 Oct 1997

5340-14-377-1253
Anchor Strap

143771253
NO PRIMARY REF14-377-1253: RNCC: 3 | RNVC: 2
5503398: RNCC: 5 | RNVC: 2
35129: RNCC: 5 | RNVC: 9

17 May 1982

5340-14-519-3681
Mounting Plate

145193681
350A77-1200-26: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-362-1066
Detent Plunger

143621066
B0035-015F37: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-341-8361
Access Cover

143418361
M3B703-19-02: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-371-6174
Retaining Strap

143716174
650-403-046-0: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-396-2635
Access Cover

143962635
NO PRIMARY REF14-396-2635: RNCC: 3 | RNVC: 2
P4H014943-00: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-366-5712
Threaded Rod End

143665712
365A57-1134-20: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-286-5156
Bumper

142865156
341A24-1004-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-323-2310
Access Cover

143232310
103-21-132: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-446-8221
Mounting Plate

144468221
21346686-00: RNCC: 3 | RNVC: 2
21346686-6: RNCC: 5 | RNVC: 2

17 Apr 1991

5340-14-431-3992
Expansion Plug

144313992
E29584-36GATL: RNCC: 2 | RNVC: 2
4-077-8029: RNCC: 3 | RNVC: 2

17 Apr 1989

5340-14-224-0203
Handwheel

142240203
GSM137-001F13DET5SANSB0ULEAS10G: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-332-0888
Retaining Strap

143320888
8500-2400: RNCC: 3 | RNVC: 2
8500-408: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-364-8910
Angle Bracket

143648910
321A27-0351-20: RNCC: 3 | RNVC: 2
85-691-0643: RNCC: 6 | RNVC: 9

2 Sep 1980

5340-14-456-3223
Loop Clamp

144563223
E1M-3713-01: RNCC: 3 | RNVC: 2
E1M3713-01: RNCC: 5 | RNVC: 2
MAT169-0024F13ROUGE: RNCC: 5 | RNVC: 2
E1M3713-01: RNCC: 5 | RNVC: 2

25 Jun 1992

5340-14-571-2929
Utility Resilient Mount

145712929
HH10-50IM2: RNCC: 3 | RNVC: 2
10460200: RNCC: 5 | RNVC: 2

9 Mar 2012

5340-14-486-5267
Mounting Bracket

144865267
4423-029: RNCC: 3 | RNVC: 2

21 Mar 1997

5340-14-479-0536
Handwheel

144790536
IF1006-109: RNCC: 3 | RNVC: 9
IF1006109: RNCC: 3 | RNVC: 9

13 Dec 1995

5340-14-296-9143
Control Rod

142969143
73-071-168: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-324-7493
Angle Bracket

143247493
253-5M364P115: RNCC: 3 | RNVC: 9
PA253-5M364P115: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-439-8252
Mounting Bracket

144398252
332A55-2015-20: RNCC: 3 | RNVC: 2

23 May 1990

5340-14-390-1622
Pipe Hanger

143901622
366A75-3221-20: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-449-1060
Mounting Bracket

144491060
81011-14: RNCC: 3 | RNVC: 2

29 Jul 1991

5340-14-532-6552
Plug Button

145326552
9012-200-004C: RNCC: 3 | RNVC: 2

27 Nov 2002

5340-14-216-6705
Retaining Strap

142166705
NO PRIMARY REF14-216-6705: RNCC: 3 | RNVC: 2
23048: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-486-0533
Lock Bolt

144860533
350A25-1520-02: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-446-0820
Anchor Strap

144460820
007856035P: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-481-7606
Access Cover

144817606
35 57 93: RNCC: 3 | RNVC: 2

30 May 1996

5340-14-404-3970
Angle Bracket

144043970
9760-76: RNCC: 3 | RNVC: 9

30 Oct 1985

5340-14-541-8481
Access Cover

145418481
1031077909: RNCC: 3 | RNVC: 2
MAF0000000573: RNCC: 6 | RNVC: 9

26 Jun 2004

5340-14-546-4744
Mounting Bracket

145464744
5000749728: RNCC: 3 | RNVC: 2

6 Jul 2005

5340-14-402-7500
Bridge Clamp

144027500
220074: RNCC: 3 | RNVC: 2

19 Jul 1985

5340-14-550-3275
Mounting Bracket

145503275
2714857110: RNCC: 3 | RNVC: 2

15 Jun 2006

5340-14-031-9803
Bail Handle

140319803
CF1A11512: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-550-5126
Pipe Hanger

145505126
RA1A701852231: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-448-8206
Rod End Clevis

144488206
4-013811: RNCC: 3 | RNVC: 2
4169-3900: RNCC: 5 | RNVC: 2

10 Jul 1991

5340-14-418-4871
Angle Bracket

144184871
61781: RNCC: 3 | RNVC: 2

26 Aug 1987

5340-14-497-7451
Mounting Plate

144977451
J05085-02-0210P001: RNCC: 3 | RNVC: 2

15 Oct 1997

5340-14-553-6846
Mounting Plate

145536846
82073463000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-400-8158
Loop Clamp

144008158
51200002005: RNCC: 3 | RNVC: 2
10N5: RNCC: 5 | RNVC: 2
9562810760: RNCC: 5 | RNVC: 2

21 May 1985

5340-14-406-4302
Loop Clamp

144064302
PE27019RI22: RNCC: 3 | RNVC: 2
85-693-0833: RNCC: 6 | RNVC: 9

8 Jan 1986

5340-14-424-3820
Rod End Clevis

144243820
050A66-617656E: RNCC: 3 | RNVC: 2
0617656E00: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-522-8031
Runner

145228031
MAT291-0261: RNCC: 3 | RNVC: 2

27 Nov 2000

5340-14-310-4401
Handwheel

143104401
DIAM200 CARRE17: RNCC: 3 | RNVC: 9
200-17F: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-382-8223
Angle Bracket

143828223
NO PRIMARY REF14-382-8223: RNCC: 3 | RNVC: 2
RF72IMS2008RF: RNCC: 5 | RNVC: 2

17 Feb 1983

5340-14-257-1046
Lock Bolt

142571046
330A87-1161-20: RNCC: 3 | RNVC: 2
330A87-1161-2000: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-276-2593
Pipe Hanger

142762593
160-11522-21: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-401-4889
Bow Handle

144014889
3511 131 36351: RNCC: 3 | RNVC: 2
3511-131-36351: RNCC: 5 | RNVC: 2

5 Jun 1985

5340-14-473-8316
Mounting Bracket

144738316
332A58-2023-2001: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-464-9744
Angle Bracket

144649744
365A67-4101-26: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-570-4717
Utility Resilient Mount

145704717
BF45-85E25: RNCC: 3 | RNVC: 2

16 Dec 2011

5340-14-511-6250
Pipe Hanger

145116250
78733-038-038A: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-464-8932
Mounting Bracket

144648932
312-04204-001: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-356-2310
Bumper

143562310
5322-462-44179: RNCC: 3 | RNVC: 2

25 Apr 1979

5340-14-481-1504
Bumper

144811504
MN45-CN60: RNCC: 3 | RNVC: 2
7-90-2-02-01REP13: RNCC: 5 | RNVC: 2
MN45-CN60: RNCC: 5 | RNVC: 2

18 Apr 1996

5340-14-512-0458
Bow Handle

145120458
37131: RNCC: 3 | RNVC: 2
37131M443-140N: RNCC: 3 | RNVC: 9
0007677: RNCC: 5 | RNVC: 2

3 Feb 1999

5340-14-371-8349
Angle Bracket

143718349
NO PRIMARY REF14-371-8349: RNCC: 3 | RNVC: 2
RF72-3002: RNCC: 5 | RNVC: 2

5 Aug 1981

5340-14-458-7418
Loop Clamp

144587418
CLB43-13-708: RNCC: 3 | RNVC: 2

3 Nov 1992

5340-14-401-3149
Butt Hinge

144013149
CPI20-10-30-25: RNCC: 3 | RNVC: 2
CPI201030-25: RNCC: 5 | RNVC: 2

5 Jun 1985

5340-14-457-7013
Loop Clamp

144577013
MAT281-0005F16: RNCC: 3 | RNVC: 2

16 Sep 1992

5340-14-534-1356
Mounting Bracket

145341356
332P87-2022-2601: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-239-4377
Cover Strip

142394377
321A25-0002-36: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-272-7702
Access Cover

142727702
6232-0711: RNCC: 3 | RNVC: 2
6232-0711: RNCC: 5 | RNVC: 2
6232-0711: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-535-3563
Loop Clamp

145353563
060662-850-921: RNCC: 3 | RNVC: 9
7703079169: RNCC: 5 | RNVC: 2

22 May 2003

5340-14-533-8834
Cover Strip

145338834
42-250-213: RNCC: 3 | RNVC: 2
SZ42.250.213: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-549-8632
Mounting Bracket

145498632
2093181-001: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-366-8679
Angle Bracket

143668679
330A22-2055-85: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-486-2378
Bumper

144862378
435891: RNCC: 3 | RNVC: 2
435891-001: RNCC: 5 | RNVC: 9

5 Mar 1997

5340-14-308-5345
Bridge Clamp

143085345
321C0-0187REP6: RNCC: 3 | RNVC: 2
321C0-187REP6: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-218-4305
Angle Bracket

142184305
4250-50-03: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-519-9281
Mounting Plate

145199281
1565-S9: RNCC: 3 | RNVC: 2
1565S9: RNCC: 5 | RNVC: 2

21 Apr 2000

5340-14-501-2438
Mounting Plate

145012438
486.009: RNCC: 3 | RNVC: 2
486-009: RNCC: 3 | RNVC: 2
F300 0T 025 2843: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-341-7408
Access Cover

143417408
73-1532: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-220-4918
Rod End Clevis

142204918
253-5M837-3P16A: RNCC: 3 | RNVC: 9
PA253-5M837-3P16A: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-507-2569
Runner

145072569
588A216: RNCC: 3 | RNVC: 2

24 Jun 1998

5340-14-426-5604
Angle Bracket

144265604
39534293: RNCC: 3 | RNVC: 2
39534293: RNCC: 5 | RNVC: 9

8 Sep 1988

5340-14-357-8344
Mounting Plate

143578344
18129983: RNCC: 3 | RNVC: 2
18129983: RNCC: 3 | RNVC: 9

20 Jul 1979

5340-14-396-6002
Retaining Strap

143966002
6657124: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-311-9466
Mounting Bracket

143119466
16559316: RNCC: 3 | RNVC: 2
10308980: RNCC: 5 | RNVC: 9
16559316: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-379-8303
Anchor Strap

143798303
3205-18: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-490-1779
Rim Latch

144901779
5302357.02 36 BIS.02 REP B: RNCC: 3 | RNVC: 2
5302357-02 36BIS02REPB: RNCC: 5 | RNVC: 2
5302357-02 36-BIS-02-REP B: RNCC: 5 | RNVC: 2
F300 0T 024 2497: RNCC: 6 | RNVC: 9

17 Sep 1997

5340-14-331-0144
Access Cover

143310144
T20-13B207: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-266-2964
Threaded Rod End

142662964
36128: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-463-8697
Blank Panel

144638697
2920-50-07-01: RNCC: 3 | RNVC: 2
89472934: RNCC: 5 | RNVC: 2

30 Jun 1993

5340-14-447-7209
Access Cover

144477209
NO PRIMARY REF14-447-7209: RNCC: 3 | RNVC: 2
A9929-7: RNCC: 5 | RNVC: 9
A9929-7: RNCC: 5 | RNVC: 9

29 May 1991

5340-14-459-3787
Section Block Clamp

144593787
16787433: RNCC: 3 | RNVC: 2
16787433: RNCC: 5 | RNVC: 9

26 Nov 1992

5340-14-472-8723
Cover Strip

144728723
332A23-0621-03: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-384-9199
Plug Button

143849199
613-990-149-0: RNCC: 3 | RNVC: 2

2 Jun 1983

5340-14-420-0640
Handwheel

144200640
D1011199: RNCC: 3 | RNVC: 2
S207001804: RNCC: 5 | RNVC: 2
E2010015-15: RNCC: 5 | RNVC: 9

18 Nov 1987

5340-14-522-5154
Detent Plunger

145225154
015020190001: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-14-480-0858
Shelf Bracket

144800858
RA1M121337110: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-395-1532
Loop Clamp

143951532
20853201: RNCC: 3 | RNVC: 9

2 Oct 1984

5340-14-501-0070
Mounting Plate

145010070
10305621: RNCC: 3 | RNVC: 2
F300 0T 025 0364: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-509-6776
Pipe Hanger

145096776
RA1M702502661: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-462-6460
Mounting Bracket

144626460
412007180: RNCC: 3 | RNVC: 2
412007180: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-506-2971
Angle Bracket

145062971
38661048: RNCC: 3 | RNVC: 2
38661048: RNCC: 5 | RNVC: 9

22 Apr 1998

5340-14-538-7731
Handwheel

145387731
NGM0011040318746: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-330-1314
Rod End Clevis

143301314
19535: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-379-3019
Quick Release Pin

143793019
NO PRIMARY REF14-379-3019: RNCC: 3 | RNVC: 2
BIR01CE12-030: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-14-526-4775
Pipe Hanger

145264775
78733-056-022A: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-429-2785
Retaining Strap

144292785
FA1R717-079: RNCC: 3 | RNVC: 2

11 Jan 1989

5340-14-329-3297
Runner

143293297
GSM446-009F22: RNCC: 3 | RNVC: 2
A0115-008F22: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-303-5522
Loop Clamp

143035522
F705-035: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-278-3311
Pipe Hanger

142783311
160-11523-48: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-206-8756
Webbing Strap

142068756
NO PRIMARY REF14-206-8756: RNCC: 3 | RNVC: 2
2229-7-100: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-390-8600
Access Cover

143908600
ST159-2M311-1P37: RNCC: 3 | RNVC: 2
ST159-2M311-1P37B: RNCC: 5 | RNVC: 2

1 Mar 1984

5340-14-384-9380
Loop Clamp

143849380
PE27010A12: RNCC: 3 | RNVC: 2
85-801-0029: RNCC: 6 | RNVC: 9

2 Jun 1983

5340-14-383-9585
Angle Bracket

143839585
NO PRIMARY REF14-383-9585: RNCC: 3 | RNVC: 2
28989: RNCC: 5 | RNVC: 9

4 May 1983

5340-14-357-7912
Friction Catch

143577912
NO PRIMARY REF14-357-7912: RNCC: 3 | RNVC: 2
639L22: RNCC: 5 | RNVC: 2
639L22: RNCC: 5 | RNVC: 9

20 Jul 1979

5340-14-375-9810
Loop Clamp

143759810
1-0929-268: RNCC: 3 | RNVC: 2

30 Mar 1982

5340-14-386-9664
Snap Hook

143869664
4030-25AT32: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-428-3751
Loop Clamp

144283751
3-2633-03-100A: RNCC: 3 | RNVC: 2
3-2633-03-100A: RNCC: 5 | RNVC: 9

8 Dec 1988

5340-14-489-6254
Mounting Bracket

144896254
332A61-6216-00: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-311-2025
Handwheel

143112025
GSM137-036-F1-REP1: RNCC: 3 | RNVC: 2
000MA060F6-5N1ETF24: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-355-1744
Loop Clamp

143551744
085878: RNCC: 3 | RNVC: 2
085878V: RNCC: 5 | RNVC: 2
D1557-36039: RNCC: 5 | RNVC: 2

19 Mar 1979

5340-14-447-3257
Mounting Plate

144473257
IC231-14: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-201-9204
Retaining Strap

142019204
574-310-120-0: RNCC: 3 | RNVC: 2

1 Jan 1962

5340-14-311-3672
Webbing Strap

143113672
AL48-2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-518-0009
Webbing Strap

145180009
10279292-2: RNCC: 3 | RNVC: 9

21 Jan 2000

5340-14-301-9932
Pipe Hanger

143019932
95420-0034: RNCC: 3 | RNVC: 2
09-730-01: RNCC: 5 | RNVC: 2
1150100973001: RNCC: 5 | RNVC: 2
95-420-0034: RNCC: 5 | RNVC: 2
65000110000: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-508-1137
Mounting Plate

145081137
4918-2-004: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-318-8919
Support Hook

143188919
121A52-443-10-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-529-6928
Access Cover

145296928
457-12736-000: RNCC: 3 | RNVC: 2

4 Apr 2002

5340-14-399-1289
Pipe Hanger

143991289
031978: RNCC: 3 | RNVC: 2
5516038175: RNCC: 5 | RNVC: 2
31978: RNCC: 5 | RNVC: 2
P20369-39: RNCC: 5 | RNVC: 2
319-78: RNCC: 5 | RNVC: 2
3245060319786: RNCC: 5 | RNVC: 2
P2036939: RNCC: 5 | RNVC: 2

6 Mar 1985

5340-14-323-2599
Retaining Strap

143232599
574-412-180-0: RNCC: 3 | RNVC: 2
85-100-5602: RNCC: 6 | RNVC: 9

1 Jan 1975

5340-14-450-0026
Retaining Band

144500026
5516014181: RNCC: 3 | RNVC: 2
5516014181: RNCC: 5 | RNVC: 9

18 Sep 1991

5340-14-427-7330
Loop Clamp

144277330
0249730060: RNCC: 3 | RNVC: 2

9 Nov 1988

5340-14-420-0432
Bridge Clamp

144200432
C678054: RNCC: 3 | RNVC: 2
678054: RNCC: 5 | RNVC: 9

18 Nov 1987

5340-14-422-1728
Armature Stop

144221728
31731109: RNCC: 3 | RNVC: 9

24 Feb 1988

5340-14-499-1141
Corner Brace

144991141
F00146180: RNCC: 3 | RNVC: 2
F00146180: RNCC: 5 | RNVC: 9
F300 0T 018 3246: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-303-3396
Mending Plate

143033396
3028970: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-496-6604
Compression Cup

144966604
1252420900: RNCC: 3 | RNVC: 2
DAH1252420900: RNCC: 5 | RNVC: 9
F300 0T 021 8621: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-489-8279
Mounting Bracket

144898279
E5270326: RNCC: 3 | RNVC: 9

22 Aug 1997

5340-14-476-8382
Spring Holder

144768382
711-991: RNCC: 3 | RNVC: 2

5 Jul 1995

5340-14-372-1153
Retaining Strap

143721153
F125A: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-549-8465
Mounting Bracket

145498465
F1262537: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-383-0086
Mending Plate

143830086
4770215900: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-250-0129
Retaining Strap

142500129
5001T22: RNCC: 3 | RNVC: 2
0000481994: RNCC: 5 | RNVC: 2
0000481994: RNCC: 5 | RNVC: 9
481994: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-505-0970
Bow Handle

145050970
50348500: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-377-5391
Angle Bracket

143775391
A21A221176221: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-453-2656
Angle Bracket

144532656
632501: RNCC: 3 | RNVC: 2

12 Feb 1992

5340-14-554-6037
Mounting Bracket

145546037
0390757710: RNCC: 3 | RNVC: 2

24 Jul 2007

5340-14-515-9120
Mounting Bracket

145159120
660946: RNCC: 3 | RNVC: 2

26 Aug 1999

5340-14-553-1603
Mounting Plate

145531603
0177130020: RNCC: 3 | RNVC: 2

8 Mar 2007

5340-14-537-9030
Mounting Bracket

145379030
10618729: RNCC: 3 | RNVC: 2

3 Dec 2003

5340-14-438-8166
Bumper

144388166
TB1030409: RNCC: 3 | RNVC: 2

9 Apr 1990

5340-14-526-4297
Mounting Plate

145264297
RPL711500513: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-456-1443
Mounting Bracket

144561443
5000894447: RNCC: 3 | RNVC: 2

18 Jun 1992

5340-14-250-0306
Retaining Band

142500306
0000129711: RNCC: 3 | RNVC: 2
0000129711: RNCC: 5 | RNVC: 9
129711: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-358-4268
Retaining Strap

143584268
393170: RNCC: 3 | RNVC: 2

13 Aug 1979

5340-14-384-9574
Doorknob

143849574
3998: RNCC: 3 | RNVC: 2

2 Jun 1983

5340-14-361-1746
Runner

143611746
BAZ94367: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-408-7906
Cover Strip

144087906
DA2C210115: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-437-4235
Mounting Plate

144374235
3005036: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-533-8420
Butt Hinge

145338420
46945623: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-516-6795
Mounting Bracket

145166795
40161096: RNCC: 3 | RNVC: 2

12 Oct 1999

5340-14-349-3703
Retaining Clip

143493703
1112-4: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-516-6653
Butt Hinge

145166653
67200032: RNCC: 3 | RNVC: 2

11 Oct 1999

5340-14-409-9404
Sash Pole

144099404
1846-33: RNCC: 3 | RNVC: 9
9120016480: RNCC: 5 | RNVC: 2
9120016480: RNCC: 5 | RNVC: 9

4 Jun 1986

5340-14-411-4013
Wiring Harness

144114013
A11A822210250: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-264-0730
Mending Plate

142640730
70885014: RNCC: 3 | RNVC: 2
70885014: RNCC: 5 | RNVC: 9
885014: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-539-8378
Mounting Plate

145398378
67000346: RNCC: 3 | RNVC: 2
SYQ4740: RNCC: 5 | RNVC: 2

11 Feb 2004

5340-14-290-3190
Plug Button

142903190
0264400320: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-523-2161
Pipe Hanger

145232161
RA1B702736115: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-425-8916
Anchor Strap

144258916
093261A01TRA: RNCC: 3 | RNVC: 2
093261A: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-14-031-1439
Anchor Strap

140311439
55692: RNCC: 3 | RNVC: 2
VDPM02927: RNCC: 5 | RNVC: 2

14 Jun 1980

5340-14-292-0754
Access Cover

142920754
24101014000: RNCC: 3 | RNVC: 2
101J140: RNCC: 5 | RNVC: 9
241010140: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-551-5449
Access Cover

145515449
711436: RNCC: 3 | RNVC: 2

29 Sep 2006

5340-14-453-9186
Loop Clamp

144539186
SM430PADPASV4A: RNCC: 3 | RNVC: 2

14 Mar 1992

5340-14-393-5506
Angle Bracket

143935506
970271: RNCC: 3 | RNVC: 2
970271: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-14-438-2521
Access Cover

144382521
123684-BRONZE: RNCC: 3 | RNVC: 2

9 Mar 1990

5340-14-480-9250
Angle Bracket

144809250
3BM00741AAAA: RNCC: 3 | RNVC: 2
3BM00741AAAA: RNCC: 5 | RNVC: 9

11 Apr 1996

5340-14-425-9101
Rod End Clevis

144259101
BFP00312: RNCC: 3 | RNVC: 2

28 Jul 1988

5340-14-551-8042
Metal Grille

145518042
531188: RNCC: 3 | RNVC: 2
GEA 300X300: RNCC: 5 | RNVC: 2
AA012027: RNCC: 6 | RNVC: 9

25 Oct 2006

5340-14-480-0622
Access Hole Frame

144800622
10105557: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-230-5112
Access Cover

142305112
0223307320: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-517-5398
Bow Handle

145175398
P52: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-294-7117
Bow Handle

142947117
BM700976: RNCC: 3 | RNVC: 2
AACBR1150BE1: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-377-3826
Loop Clamp

143773826
NO PRIMARY REF14-377-3826: RNCC: 3 | RNVC: 2
45009: RNCC: 5 | RNVC: 2

17 May 1982

5340-14-364-9210
Retaining Strap

143649210
55215-25ACL: RNCC: 3 | RNVC: 2
85-691-1273: RNCC: 6 | RNVC: 9

2 Sep 1980

5340-14-388-8843
Bumper

143888843
365A21-3353-21: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-362-4363
Angle Bracket

143624363
103254-01: RNCC: 3 | RNVC: 2
103254-01: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-287-6400
Lock-Release Lever

142876400
78-8615-2464-9: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-437-3963
Bridge Clamp

144373963
853-300-664-0: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-468-1592
Angle Bracket

144681592
78703-20-049: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-280-0444
Control Rod

142800444
79526-470: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-532-3965
Angle Bracket

145323965
78703-30-033G: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-442-7802
Arched Cushion

144427802
BA30089050-36: RNCC: 2 | RNVC: 2

5 Nov 1990

5340-14-473-6567
Mounting Bracket

144736567
332A61-3010-01: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-380-2877
Butt Hinge

143802877
365A25-3074-00: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-230-7313
Handwheel

142307313
GSM137-001F14-4C1: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-456-5972
Retaining Strap

144565972
L177-203499: RNCC: 3 | RNVC: 2
L177203499: RNCC: 5 | RNVC: 2
203499: RNCC: 5 | RNVC: 2
5045518: RNCC: 5 | RNVC: 9

9 Jul 1992

5340-14-322-8482
Mending Plate

143228482
3130S45-00-202: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-459-6844
Access Cover

144596844
A10140-03-0000P030: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-396-1569
Angle Bracket

143961569
NO PRIMARY REF14-396-1569: RNCC: 3 | RNVC: 2
P4H014947-00: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-457-6772
Plug Button

144576772
A03037-10-2010P052: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-445-5283
Rigid Caster

144455283
TP5BD200-23R: RNCC: 3 | RNVC: 2
91533165: RNCC: 5 | RNVC: 2

14 Feb 1991

5340-14-458-5050
Mounting Bracket

144585050
6270-02793: RNCC: 3 | RNVC: 2

23 Oct 1992

5340-14-520-3016
Metal Grille

145203016
20400021: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-502-8302
Compression Cup

145028302
9R2610: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-385-1058
Retaining Band

143851058
M04VW3021343606: RNCC: 3 | RNVC: 2
M04VW3021343603: RNCC: 5 | RNVC: 2

26 Jul 1983

5340-14-549-9205
Mounting Plate

145499205
2092529: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-334-4461
Compression Cup

143344461
127-18A: RNCC: 3 | RNVC: 2

1 Jun 1976

5340-14-452-6323
Mounting Plate

144526323
29388179: RNCC: 3 | RNVC: 9

15 Jan 1992

5340-14-379-0210
Runner

143790210
2206-912B514: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-512-5872
Metal Grille

145125872
104697: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-524-6190
Mounting Bracket

145246190
10560250: RNCC: 3 | RNVC: 2

29 Mar 2001

5340-14-410-8446
Angle Bracket

144108446
CSZ350: RNCC: 3 | RNVC: 2
CSZ350: RNCC: 5 | RNVC: 2
CSZ350: RNCC: 5 | RNVC: 2

16 Jul 1986

5340-14-424-2856
Angle Bracket

144242856
0185100740: RNCC: 3 | RNVC: 2
89414750: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-555-4111
Loop Clamp

145554111
78651RH6: RNCC: 1 | RNVC: 2
78651RH6: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-14-551-9133
Mounting Bracket

145519133
0026480: RNCC: 3 | RNVC: 2

8 Nov 2006

5340-14-356-3365
Angle Bracket

143563365
A11A231460052N1: RNCC: 3 | RNVC: 2

25 Apr 1979

5340-14-515-5227
Bumper

145155227
9403172101: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-533-2797
Angle Bracket

145332797
202842: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-453-0664
Vent Plug

144530664
15100820K: RNCC: 3 | RNVC: 2

3 Feb 1992

5340-14-505-0073
Runner

145050073
5010376061: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-452-3639
Block Clamp

144523639
11111556041: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-450-6629
Mounting Bracket

144506629
623718: RNCC: 3 | RNVC: 2

16 Oct 1991

5340-14-469-8023
Angle Bracket

144698023
16775482: RNCC: 3 | RNVC: 2

10 May 1994

5340-14-487-5607
Pipe Hanger

144875607
RA1M701732103: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-535-4740
Angle Bracket

145354740
52951116: RNCC: 3 | RNVC: 2

27 May 2003

5340-14-530-5287
Sliding Block

145305287
W004520257: RNCC: 3 | RNVC: 2

18 Jun 2002

5340-14-531-5490
Pipe Hanger

145315490
09156300134: RNCC: 3 | RNVC: 2

28 Aug 2002

5340-14-481-3479
Access Cover

144813479
34 98 82: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-554-3325
Mounting Bracket

145543325
82118338000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-429-8296
Detent Plunger

144298296
318631: RNCC: 3 | RNVC: 2
318631: RNCC: 5 | RNVC: 9

14 Feb 1989

5340-14-351-4499
Retaining Strap

143514499
1051206902: RNCC: 3 | RNVC: 2
DAH1051206902: RNCC: 5 | RNVC: 9

12 Sep 1978

5340-14-535-1671
Bridge Clamp

145351671
5000916807: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-518-1596
Mounting Bracket

145181596
5010065016: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-277-3726
Loop Clamp

142773726
0213107390: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-513-0564
Webbing Strap

145130564
009579035P: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-14-396-5399
Retaining Strap

143965399
222400: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-464-3610
Angle Bracket

144643610
STK00529: RNCC: 3 | RNVC: 2
STK00529: RNCC: 5 | RNVC: 2

28 Jul 1993

5340-14-464-3218
Mounting Bracket

144643218
ST406M75P272: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-398-7701
Mounting Plate

143987701
20189617: RNCC: 3 | RNVC: 2
20189617: RNCC: 5 | RNVC: 9

19 Feb 1985

5340-14-408-4841
Retaining Strap

144084841
30318140YAA: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-536-5676
Angle Bracket

145365676
0B5220: RNCC: 3 | RNVC: 2

2 Sep 2003

5340-14-460-2063
Mounting Bracket

144602063
LN446018F11AG: RNCC: 3 | RNVC: 2
RAB0306: RNCC: 5 | RNVC: 2

15 Jan 1993

5340-14-442-4298
Mounting Plate

144424298
552703: RNCC: 3 | RNVC: 2
552703: RNCC: 5 | RNVC: 9

16 Oct 1990

5340-14-533-5435
Mounting Bracket

145335435
F1261983: RNCC: 3 | RNVC: 2

10 Feb 2003

5340-14-393-1980
Filler Opening Cap

143931980
050007100: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-14-485-8470
Mounting Bracket

144858470
1013853R00: RNCC: 3 | RNVC: 2

19 Feb 1997

5340-14-433-9034
Mounting Plate

144339034
017079G: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-14-415-4520
Retaining Strap

144154520
241417: RNCC: 3 | RNVC: 2

18 May 1987

5340-14-343-1569
Mending Plate

143431569
4770010290: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-351-9103
Expansion Plug

143519103
0234-03: RNCC: 3 | RNVC: 2
7903075019: RNCC: 3 | RNVC: 2
535 90 30 166 11: RNCC: 5 | RNVC: 2
0009426: RNCC: 5 | RNVC: 2
7903075019: RNCC: 5 | RNVC: 2
7903075019: RNCC: 5 | RNVC: 2
F300 0T 024 6029: RNCC: 6 | RNVC: 9

16 Oct 1978

5340-14-261-0873
Retaining Strap

142610873
175-21-445: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-457-5065
Mounting Bracket

144575065
624701: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-436-3223
Angle Bracket

144363223
3168892: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-14-458-5147
Webbing Strap

144585147
96162403: RNCC: 3 | RNVC: 2
96162403: RNCC: 5 | RNVC: 9

23 Oct 1992

5340-14-444-4050
Bumper

144444050
29367913: RNCC: 3 | RNVC: 2
29367913: RNCC: 3 | RNVC: 9

9 Jan 1991

5340-14-393-5367
Runner

143935367
15452305: RNCC: 3 | RNVC: 2
15452305: RNCC: 5 | RNVC: 2
15452305: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-14-032-0733
Angle Bracket

140320733
341A58-1014-00: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-406-1608
Hand Crank Arm

144061608
NO PRIMARY REF14-406-1608: RNCC: 3 | RNVC: 2
50272503: RNCC: 5 | RNVC: 9

8 Jan 1986

5340-14-396-2562
Anchor Strap

143962562
7199-406: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-352-6004
Angle Bracket

143526004
341A22-1016-22: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-529-4179
Pipe Hanger

145294179
EA1M705-28-03: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-428-8172
Access Cover

144288172
790-0169: RNCC: 3 | RNVC: 2

22 Dec 1988

5340-14-401-4256
Access Cover

144014256
9005-120-000A: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-464-8444
Mounting Bracket

144648444
M223-02-100001: RNCC: 3 | RNVC: 2

1 Sep 1993

5340-14-356-7570
Loop Clamp

143567570
NO PRIMARY REF14-356-7570: RNCC: 3 | RNVC: 2
F11PA3121-066: RNCC: 5 | RNVC: 9

15 May 1979

5340-14-392-4742
Retaining Band

143924742
NO PRIMARY REF14-392-4742: RNCC: 3 | RNVC: 2
1821B2: RNCC: 5 | RNVC: 9

21 Mar 1984

5340-14-533-8975
Bumper

145338975
08-704-202: RNCC: 3 | RNVC: 2
SZ08.704.202: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-440-6889
Loop Holder

144406889
332A91-5400-10: RNCC: 3 | RNVC: 2

18 Jul 1990

5340-14-551-5953
Bumper

145515953
42000-25NOIR: RNCC: 3 | RNVC: 2

9 Oct 2006

5340-14-464-3436
Mounting Bracket

144643436
ST406M52P467: RNCC: 3 | RNVC: 2
50-1023: RNCC: 5 | RNVC: 2

28 Jul 1993

5340-14-392-0792
Loop Clamp

143920792
320-041-801-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-444-9731
Kick Door Plate

144449731
12-006-400: RNCC: 3 | RNVC: 2
12-006-400: RNCC: 5 | RNVC: 9

30 Jan 1991

5340-14-473-8851
Mounting Bracket

144738851
J05916-02: RNCC: 3 | RNVC: 2

13 Jan 1995

5340-14-388-5864
Loop Clamp

143885864
NO PRIMARY REF14-388-5864: RNCC: 3 | RNVC: 2
328755: RNCC: 5 | RNVC: 9

3 Nov 1983

5340-14-463-7299
Mounting Plate

144637299
1400-76-10: RNCC: 3 | RNVC: 2
714624: RNCC: 5 | RNVC: 2
89296182: RNCC: 5 | RNVC: 2

23 Jun 1993

5340-14-324-2441
Sliding Door Track

143242441
330A22-2185-05: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-336-0423
Retaining Strap

143360423
103-42-119: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-464-8937
Mounting Bracket

144648937
312-01700-002: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-209-7303
Mending Plate

142097303
110333: RNCC: 3 | RNVC: 2
M110333: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-437-1642
Protection Bellows

144371642
115015: RNCC: 3 | RNVC: 2

17 Jan 1990

5340-14-477-8927
Bow Handle

144778927
T700A2522052101: RNCC: 3 | RNVC: 2

27 Sep 1995

5340-14-547-1439
Lock Bolt

145471439
51330: RNCC: 3 | RNVC: 2

28 Sep 2005

5340-14-409-1009
Detent Plunger

144091009
590853: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-521-4156
Loop Clamp

145214156
335772: RNCC: 3 | RNVC: 2
335772: RNCC: 5 | RNVC: 9

26 Jul 2000

5340-14-523-2521
Mounting Plate

145232521
RA1M702206351: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-360-2189
Detent Plunger

143602189
16293702: RNCC: 3 | RNVC: 2
16293702: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-545-2644
Mounting Bracket

145452644
S215A4012102: RNCC: 3 | RNVC: 2

30 Mar 2005

5340-14-494-4797
Mounting Bracket

144944797
T53 909 40: RNCC: 3 | RNVC: 2
F300 0T 017 3848: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-441-0046
Retaining Band

144410046
06205677: RNCC: 3 | RNVC: 2

9 Aug 1990

5340-14-270-9590
Angle Bracket

142709590
42260: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-259-5943
Retaining Strap

142595943
9137655: RNCC: 3 | RNVC: 2
9137655: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-258-8379
Threaded Rod End

142588379
16059: RNCC: 3 | RNVC: 2
01605977: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-493-6531
Mounting Plate

144936531
20788155: RNCC: 3 | RNVC: 9

8 Oct 1997

5340-14-494-1883
Cover Strip

144941883
132150R: RNCC: 3 | RNVC: 2
F300 0T 015 9332: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-434-0827
Bumper

144340827
0870265L00: RNCC: 3 | RNVC: 2

5 Sep 1989

5340-14-521-5722
Mounting Bracket

145215722
160-888267: RNCC: 3 | RNVC: 2

23 Aug 2000

5340-14-545-2631
Mounting Bracket

145452631
S214A4012107: RNCC: 3 | RNVC: 2

30 Mar 2005

5340-14-410-6290
Retaining Strap

144106290
404218: RNCC: 3 | RNVC: 2
BGE404218: RNCC: 5 | RNVC: 2

9 Jul 1986

5340-14-484-7414
Metal Grille

144847414
109-319: RNCC: 3 | RNVC: 2
1050227E00: RNCC: 5 | RNVC: 2

5 Dec 1996

5340-14-360-8222
Butt Hinge

143608222
C1: RNCC: 3 | RNVC: 2
11377: RNCC: 5 | RNVC: 9

19 Dec 1979

5340-14-480-8211
Runner

144808211
MP1443F01: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-14-524-2240
Mounting Plate

145242240
20232541: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-521-5002
Loop Clamp

145215002
F00214856: RNCC: 3 | RNVC: 2
F00214856: RNCC: 5 | RNVC: 9

2 Aug 2000

5340-14-455-3634
Mounting Bracket

144553634
5010054177: RNCC: 3 | RNVC: 2

21 May 1992

5340-14-551-3463
Angle Bracket

145513463
RA1M701772281A1N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-469-0774
Blank Panel

144690774
45138335: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-14-489-6094
Mounting Bracket

144896094
0301037650: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-553-6848
Mounting Plate

145536848
82073467000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-437-6145
Plate Spacer

144376145
PM1A113230015: RNCC: 3 | RNVC: 2
PM1A113230015: RNCC: 5 | RNVC: 2

7 Feb 1990

5340-14-479-6764
Webbing Strap

144796764
SANGLE36MMVO: RNCC: 3 | RNVC: 2

31 Jan 1996

5340-14-548-1217
Mounting Bracket

145481217
5430061587: RNCC: 3 | RNVC: 2

12 Dec 2005

5340-14-555-7118
Mounting Plate

145557118
0177550130: RNCC: 3 | RNVC: 2

10 Dec 2007

5340-14-466-9307
Mounting Bracket

144669307
A80914R1: RNCC: 3 | RNVC: 2

9 Dec 1993

5340-14-325-9111
Key Blank

143259111
25511B6X8XC38: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-447-5469
Plate Spacer

144475469
102733: RNCC: 3 | RNVC: 2

29 May 1991

5340-14-472-2007
Cable Retractor

144722007
88000138: RNCC: 3 | RNVC: 2
DHV19614: RNCC: 5 | RNVC: 2
DRV19614: RNCC: 5 | RNVC: 9
DHV19614: RNCC: 5 | RNVC: 9

12 Oct 1994

5340-14-533-2337
Loop Clamp

145332337
H107529V: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-426-7092
Retaining Strap

144267092
15913134: RNCC: 3 | RNVC: 2

15 Sep 1988

5340-14-544-3941
Mounting Bracket

145443941
5001864771: RNCC: 3 | RNVC: 2

26 Jan 2005

5340-14-416-2749
Bow Handle

144162749
15141832: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-394-8503
Butt Hinge

143948503
415320401113: RNCC: 3 | RNVC: 2
M4ZS460D1556: RNCC: 5 | RNVC: 2

2 Oct 1984

5340-14-475-3087
Access Cover

144753087
46424137: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-14-387-1880
Angle Bracket

143871880
A11A221276091A1: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-385-4299
Rim Lock Set

143854299
1058: RNCC: 3 | RNVC: 9
1058: RNCC: 5 | RNVC: 9

26 Jul 1983

5340-14-515-4198
Access Cover

145154198
41120093A: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-516-2178
Mounting Plate

145162178
0020383: RNCC: 3 | RNVC: 2

15 Sep 1999

5340-14-526-4898
Block Clamp

145264898
D66436: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-364-5218
Access Cover

143645218
5000496897: RNCC: 3 | RNVC: 2
5000496897: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-520-3483
Mounting Bracket

145203483
40154801: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-455-3882
Access Cover

144553882
16773697: RNCC: 3 | RNVC: 2

21 May 1992

5340-14-502-7927
Anchor Strap

145027927
7T5261: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-371-2872
Angle Bracket

143712872
398120000: RNCC: 3 | RNVC: 9

5 Aug 1981

5340-14-526-5431
Mounting Plate

145265431
78737TK050A11XA: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-366-9311
Anchor Strap

143669311
003052080P: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-524-8461
Locking Stay

145248461
208430: RNCC: 3 | RNVC: 2

23 Apr 2001

5340-14-379-4389
Access Cover

143794389
2206-331C504: RNCC: 3 | RNVC: 2

1 Oct 1982

5340-14-279-2365
Access Door Hinge

142792365
42565: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-455-7387
Access Cover

144557387
4772201620: RNCC: 3 | RNVC: 2
5044529: RNCC: 5 | RNVC: 9

11 Jun 1992

5340-14-509-0875
Access Cover

145090875
1105223Q01: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-287-9158
Webbing Strap

142879158
42526: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-513-3636
Loop Clamp

145133636
652119091: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-14-519-2485
Access Cover

145192485
208426: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-284-0312
Angle Bracket

142840312
19287234: RNCC: 3 | RNVC: 2
19287234: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-534-7067
Access Cover

145347067
10472228: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-316-9142
Anchor Strap

143169142
000MA0427F4REPAH80L24: RNCC: 3 | RNVC: 2
000MA427F32REPAH80L24: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-526-4579
Angle Bracket

145264579
RA1M705535110: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-364-2183
Loop Clamp

143642183
CR2847: RNCC: 3 | RNVC: 9

7 Aug 1980

5340-14-250-4890
Angle Bracket

142504890
12508581: RNCC: 3 | RNVC: 2
12508581: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-542-2668
Utility Access Door

145422668
921807108: RNCC: 3 | RNVC: 2
921807108: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-208-5330
Access Cover

142085330
0000128188: RNCC: 3 | RNVC: 2
0000128188: RNCC: 5 | RNVC: 9
128188: RNCC: 5 | RNVC: 9
128188: RNCC: 6 | RNVC: 9

1 Jan 1964

5340-14-338-6318
Locking Stay

143386318
0011052081: RNCC: 3 | RNVC: 2
0011052081: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-488-3988
Metal Grille

144883988
687086+22: RNCC: 3 | RNVC: 2

7 May 1997

5340-14-380-1814
Access Cover

143801814
2206-488B504: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-387-2131
Access Cover

143872131
5000606783: RNCC: 3 | RNVC: 2
5000606783: RNCC: 5 | RNVC: 9

15 Sep 1983

5340-14-317-5242
Access Cover

143175242
706038: RNCC: 3 | RNVC: 2
706038: RNCC: 5 | RNVC: 2
706038: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-291-3929
Access Cover

142913929
0235221000: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-437-2341
Access Cover

144372341
4641456: RNCC: 3 | RNVC: 9
4641456: RNCC: 5 | RNVC: 2
004641456: RNCC: 5 | RNVC: 9

23 Jan 1990

5340-14-522-6126
Utility Access Door

145226126
2344303: RNCC: 3 | RNVC: 2

8 Nov 2000

5340-14-546-0837
Clamping Catch

145460837
V95140-1XBP: RNCC: 3 | RNVC: 9

13 Jun 2005

5340-14-528-4158
Mounting Plate

145284158
99005-018: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-14-342-4663
Buckle

143424663
3511-131-47011: RNCC: 3 | RNVC: 2
3511 131 47011: RNCC: 5 | RNVC: 2

16 May 1977

5340-14-520-0255
Retaining Strap

145200255
502-551-144-0: RNCC: 3 | RNVC: 2

3 May 2000

5340-14-312-2474
Bumper

143122474
330A87-2454-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-353-7420
Butt Hinge

143537420
72-7-3331: RNCC: 3 | RNVC: 2
77077459: RNCC: 5 | RNVC: 2
91531248: RNCC: 5 | RNVC: 2

16 Jan 1979

5340-14-286-5114
Retaining Strap

142865114
341A72-1014-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-553-5546
Mounting Plate

145535546
3730-60-05-01: RNCC: 3 | RNVC: 2

16 Apr 2007

5340-14-533-1716
Angle Bracket

145331716
78702-050B: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-14-236-0991
Loop Clamp

142360991
410532: RNCC: 3 | RNVC: 2
410532: RNCC: 5 | RNVC: 2
410532: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-548-6465
Cover Strip

145486465
PM1A511323084: RNCC: 3 | RNVC: 2
PM1A511323084: RNCC: 5 | RNVC: 2

27 Jan 2006

5340-14-478-3984
Mounting Bracket

144783984
0766924L00: RNCC: 3 | RNVC: 2

27 Oct 1995

5340-14-489-5371
Mounting Bracket

144895371
29452310: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-14-527-8301
Mounting Plate

145278301
CC2005: RNCC: 3 | RNVC: 2

23 Nov 2001

5340-14-550-4107
Mounting Bracket

145504107
2714218290: RNCC: 3 | RNVC: 2

19 Jun 2006

5340-14-270-6375
Retaining Strap

142706375
17-7-4424: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-347-9594
Flush Catch Claw

143479594
ST406M12P18-6: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-314-4723
Flush Catch Claw

143144723
156751: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-209-1518
Retaining Strap

142091518
7403: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-213-7667
Loop Clamp

142137667
0098907160: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-549-9361
Mounting Bracket

145499361
F1263033: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-520-1781
Mounting Bracket

145201781
40503034: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-547-6035
Mounting Bracket

145476035
482692: RNCC: 3 | RNVC: 2

18 Oct 2005

5340-14-318-8118
Angle Bracket

143188118
0000146820: RNCC: 3 | RNVC: 2
0000146820: RNCC: 5 | RNVC: 9
146820: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-385-4040
Casement Fastener

143854040
0285325030: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-472-3524
Access Cover

144723524
1049590P01: RNCC: 3 | RNVC: 2
1049590P01: RNCC: 5 | RNVC: 2

19 Oct 1994

5340-14-341-2228
Mending Plate

143412228
425-19742-000: RNCC: 3 | RNVC: 2
425-19742-000: RNCC: 5 | RNVC: 2

16 Mar 1977

5340-14-316-5517
Loop Clamp

143165517
321A92-2075-01: RNCC: 3 | RNVC: 2
321-92-2075-01: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-408-3206
Loop Clamp

144083206
200-057-670: RNCC: 3 | RNVC: 9

19 Mar 1986

5340-14-465-2867
Angle Bracket

144652867
365A66-2078-27: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-349-1032
Rigid Caster

143491032
70-301-63L10: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-14-231-0919
Loop Clamp

142310919
ASNA0021-35G06: RNCC: 1 | RNVC: 2
353100602: RNCC: 3 | RNVC: 2
A0021-35G06: RNCC: 5 | RNVC: 2
A0021-35G6: RNCC: 5 | RNVC: 2
35G6: RNCC: 5 | RNVC: 9
511131050061: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-470-9619
Exit Bolt

144709619
3400/2000/1016: RNCC: 3 | RNVC: 2

20 Jul 1994

5340-14-489-6497
Vent Plug

144896497
332A31-1284-21: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-409-7002
Rigid Caster

144097002
SF4PA080-23R26: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-529-6781
Access Cover

145296781
4F2-01007-000: RNCC: 3 | RNVC: 2

4 Apr 2002

5340-14-351-1251
Webbing Strap

143511251
120774: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-461-6492
Retaining Bail

144616492
PL1DA002OR901012A: RNCC: 3 | RNVC: 2

19 Mar 1993

5340-14-536-3679
Mounting Bracket

145363679
47211046: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-14-524-6767
Mounting Bracket

145246767
503758A: RNCC: 3 | RNVC: 2

4 Apr 2001

5340-14-541-1451
Loop Clamp

145411451
511131005014: RNCC: 3 | RNVC: 2

14 May 2004

5340-14-513-8602
Bumper

145138602
642816: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-408-2972
Mounting Plate

144082972
DA1D201777701: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-408-4332
Retaining Strap

144084332
031577: RNCC: 3 | RNVC: 2
31577: RNCC: 5 | RNVC: 2
3245060315771: RNCC: 5 | RNVC: 2
5322696: RNCC: 5 | RNVC: 9
LG31577: RNCC: 5 | RNVC: 9

26 Mar 1986

5340-14-502-0375
Angle Bracket

145020375
K2072972: RNCC: 3 | RNVC: 2
72972: RNCC: 5 | RNVC: 2

26 Nov 1997

5340-14-545-4634
Angle Bracket

145454634
RA1A701666875: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-409-4508
Runner

144094508
0185107300: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-377-6562
Pipe Hanger

143776562
SBE404: RNCC: 3 | RNVC: 2

10 Jun 1982

Load More Results