What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 67 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 67 of 446

5340-14-523-7087
Mounting Plate

145237087
R1823524: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-500-5206
Butt Hinge

145005206
30533: RNCC: 3 | RNVC: 2
0030533: RNCC: 5 | RNVC: 2
F300 0T 024 5379: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-517-6709
Snap Hook

145176709
TSV401-10033: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-353-6820
Retaining Strap

143536820
650-403-265-0: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-217-8392
Mounting Plate

142178392
3160S82-10-010: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-402-6993
Flush Catch Claw

144026993
8642-06: RNCC: 3 | RNVC: 2
7920058741: RNCC: 5 | RNVC: 2

19 Jul 1985

5340-14-291-1805
Mending Plate

142911805
M270-202-33: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-358-7153
Handle Grip

143587153
673-10: RNCC: 3 | RNVC: 2
1846731000: RNCC: 5 | RNVC: 2
8813297017: RNCC: 5 | RNVC: 2

7 Sep 1979

5340-14-520-6208
Mending Plate

145206208
C46469-3: RNCC: 3 | RNVC: 2

24 May 2000

5340-14-527-7927
Lock Key

145277927
16-7-3313: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-14-331-1960
Friction Catch

143311960
16-7-3469: RNCC: 3 | RNVC: 2
16-7-3469: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-423-9477
Retaining Strap

144239477
535886: RNCC: 3 | RNVC: 2

5 May 1988

5340-14-555-8642
Angle Bracket

145558642
82098033000: RNCC: 3 | RNVC: 2

19 Dec 2007

5340-14-432-7382
Loop Clamp

144327382
61113105025: RNCC: 3 | RNVC: 2
85G25: RNCC: 5 | RNVC: 2

21 Jun 1989

5340-14-501-1155
Compression Cup

145011155
3930019: RNCC: 3 | RNVC: 2
F300 0T 025 1551: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-554-6048
Mounting Plate

145546048
0390917230: RNCC: 3 | RNVC: 2

24 Jul 2007

5340-14-393-4472
Mounting Plate

143934472
0288872320: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-422-5929
Mounting Plate

144225929
547812: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-14-527-6137
Mounting Bracket

145276137
COU001551011020: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-14-545-4432
Angle Bracket

145454432
RA1A701626002: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-218-5870
Loop Clamp

142185870
694000-6: RNCC: 3 | RNVC: 2
694000-6: RNCC: 5 | RNVC: 2
694000-6: RNCC: 5 | RNVC: 9

27 Aug 1997

5340-14-519-1002
Access Cover

145191002
27108527-7: RNCC: 3 | RNVC: 2

7 Mar 2000

5340-14-509-2195
Metal Grille

145092195
H118143B: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-546-2055
Angle Bracket

145462055
RA1A706116131: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-408-1578
Quick Release Pin

144081578
22609: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-418-1250
Angle Bracket

144181250
059927R01TRA: RNCC: 3 | RNVC: 2
059927R: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-469-2756
Surface Bolt

144692756
16-1-3628: RNCC: 3 | RNVC: 2

18 Apr 1994

5340-14-311-7913
Pawl Fastener

143117913
6603995: RNCC: 3 | RNVC: 2
4611839: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-481-3666
Mounting Bracket

144813666
10152438: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-546-1844
Angle Bracket

145461844
RA1B701476121A1: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-510-6827
Access Cover

145106827
46028668: RNCC: 3 | RNVC: 2

4 Nov 1998

5340-14-351-8594
Webbing Strap

143518594
7-043-400: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-213-7665
Loop Clamp

142137665
0098907080: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-514-9075
Mounting Plate

145149075
219750: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-14-500-8167
Mounting Plate

145008167
E64009998117: RNCC: 3 | RNVC: 2
F300 0T 024 8369: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-521-4345
Mounting Bracket

145214345
29423738: RNCC: 3 | RNVC: 2

26 Jul 2000

5340-14-287-8193
Loop Clamp

142878193
J032: RNCC: 3 | RNVC: 2
NYJ032: RNCC: 5 | RNVC: 2
4895062: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-483-9569
Protection Bellows

144839569
3M623190/2: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-14-458-8837
Mounting Bracket

144588837
M34028: RNCC: 3 | RNVC: 2

5 Nov 1992

5340-14-553-1228
Mounting Bracket

145531228
0249851080: RNCC: 3 | RNVC: 2

5 Mar 2007

5340-14-505-2642
Mounting Plate

145052642
4-062-2-10800.01: RNCC: 3 | RNVC: 2

17 Mar 1998

5340-14-539-9983
Plug Button

145399983
105387325142040: RNCC: 3 | RNVC: 2
PF53873830900: RNCC: 5 | RNVC: 2
53873: RNCC: 5 | RNVC: 2
PF53873830900: RNCC: 5 | RNVC: 2
S6PF53873830900: RNCC: 5 | RNVC: 2

25 Feb 2004

5340-14-477-5838
Plug Button

144775838
AJ43847EAA: RNCC: 3 | RNVC: 2

13 Sep 1995

5340-14-517-0046
Bumper

145170046
RA1M703880173: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-503-5421
Mounting Plate

145035421
94903035: RNCC: 3 | RNVC: 2

20 Jan 1998

5340-14-506-7507
Mounting Plate

145067507
0870284L00: RNCC: 3 | RNVC: 2

13 May 1998

5340-14-443-7398
Doorknob

144437398
20196283: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-14-541-9295
Bail Handle

145419295
1SH41820500: RNCC: 3 | RNVC: 2

2 Jul 2004

5340-14-546-0728
Webbing Strap

145460728
95 141 02 0003: RNCC: 3 | RNVC: 2

9 Jun 2005

5340-14-517-7690
Angle Bracket

145177690
009902050P: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-14-449-8520
Mounting Plate

144498520
385107U: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-14-449-1338
Protection Bellows

144491338
10107325: RNCC: 3 | RNVC: 2

31 Jul 1991

5340-14-304-2649
Rim Lock Set

143042649
TH20B23: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-516-3524
Lock Bolt

145163524
152600: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-526-8247
Mounting Plate

145268247
5010399733: RNCC: 3 | RNVC: 2

7 Sep 2001

5340-14-464-5452
Angle Bracket

144645452
LYN008055271201: RNCC: 3 | RNVC: 2

6 Aug 1993

5340-14-464-4159
Retaining Strap

144644159
21S0801002: RNCC: 3 | RNVC: 2
21S0801002: RNCC: 5 | RNVC: 2

28 Jul 1993

5340-14-541-5369
Mounting Plate

145415369
1091729: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-535-2276
Mounting Bracket

145352276
6401LTF141: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-450-6584
Expansion Plug

144506584
622612: RNCC: 3 | RNVC: 2

16 Oct 1991

5340-14-302-7349
Rim Lock

143027349
812: RNCC: 3 | RNVC: 2
20A1486: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-533-8536
Cover Strip

145338536
SZ10.250.372: RNCC: 3 | RNVC: 2
10-250-372: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-538-7713
Handwheel

145387713
NGM0011040318111: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-487-1188
Shelf Bracket

144871188
7527: RNCC: 3 | RNVC: 2
7527: RNCC: 5 | RNVC: 2

10 Apr 1997

5340-14-504-9804
Loop Clamp

145049804
5010094671: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-394-6423
Mounting Plate

143946423
79109616: RNCC: 3 | RNVC: 2
79109616: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-313-4659
Mounting Plate

143134659
A16214818: RNCC: 3 | RNVC: 2
A16214818: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-478-1596
Access Cover

144781596
CCN301-202A2: RNCC: 3 | RNVC: 2
CCN301202A2: RNCC: 5 | RNVC: 2

11 Oct 1995

5340-14-405-6653
Loop Clamp

144056653
NO PRIMARY REF14-405-6653: RNCC: 3 | RNVC: 2
3005-00010: RNCC: 5 | RNVC: 9
300500010: RNCC: 5 | RNVC: 9

4 Dec 1985

5340-14-526-3144
Angle Bracket

145263144
304-092-801-0: RNCC: 3 | RNVC: 2

18 Jul 2001

5340-14-442-0347
Runner

144420347
332A94-8200-12: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-526-3181
Runner

145263181
MB4630F00: RNCC: 3 | RNVC: 2

18 Jul 2001

5340-14-270-9158
Retaining Strap

142709158
204530: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-324-2469
Rod End Clevis

143242469
330A22-2343-20: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-475-7511
Synchro Clamp

144757511
4175-0114-0000: RNCC: 3 | RNVC: 2

2 May 1995

5340-14-513-6091
Mounting Bracket

145136091
10470693: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-14-418-1774
Angle Bracket

144181774
29687469: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-521-5840
Bumper

145215840
62410: RNCC: 3 | RNVC: 2

23 Aug 2000

5340-14-551-2614
Mounting Bracket

145512614
6401LOA143100: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-532-2964
Loop Clamp

145322964
7705005284: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-14-521-3326
Mounting Bracket

145213326
709289: RNCC: 3 | RNVC: 2

20 Jul 2000

5340-14-468-9916
Mounting Bracket

144689916
45057222: RNCC: 3 | RNVC: 2
45057222: RNCC: 5 | RNVC: 9

30 Mar 1994

5340-14-442-5307
Loop Clamp

144425307
7507220P017: RNCC: 3 | RNVC: 2

17 Oct 1990

5340-14-482-8983
Mounting Bracket

144828983
RA1M721320410: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-414-2024
Angle Bracket

144142024
254314: RNCC: 3 | RNVC: 2
254314: RNCC: 5 | RNVC: 9

22 Jan 1987

5340-14-388-7966
Bow Handle

143887966
300101436: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-536-4215
Mounting Bracket

145364215
T713A0001225: RNCC: 3 | RNVC: 2

5 Aug 2003

5340-14-411-8600
Loop Clamp

144118600
52213113038: RNCC: 3 | RNVC: 2
410G38: RNCC: 5 | RNVC: 2

10 Sep 1986

5340-14-549-8894
Angle Bracket

145498894
2092575: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-550-3918
Lock Bolt

145503918
17D4M32111: RNCC: 3 | RNVC: 2

19 Jun 2006

5340-14-506-2965
Angle Bracket

145062965
38659589: RNCC: 3 | RNVC: 2
38659589: RNCC: 5 | RNVC: 9

22 Apr 1998

5340-14-505-6588
Mounting Bracket

145056588
E25001000061: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-266-2137
Angle Bracket

142662137
451319: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-555-2171
Angle Bracket

145552171
RA1N701276063N1: RNCC: 3 | RNVC: 2

10 Oct 2007

5340-14-454-1063
Retaining Strap

144541063
16759226: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-500-7094
Section Block Clamp

145007094
E64009998203: RNCC: 3 | RNVC: 2
F300 0T 024 7286: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-514-4676
Shelf Bracket

145144676
10347222: RNCC: 3 | RNVC: 2

26 May 1999

5340-14-271-7879
Loop Clamp

142717879
455666: RNCC: 3 | RNVC: 2
DC56: RNCC: 5 | RNVC: 2
EA20468: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-258-8793
Retaining Band

142588793
1202BISS: RNCC: 3 | RNVC: 9
8003060: RNCC: 5 | RNVC: 9
1202BIS: RNCC: 5 | RNVC: 9
8003060P: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-497-8262
Metal Grille

144978262
1103461X00: RNCC: 3 | RNVC: 2

21 Oct 1997

5340-14-435-6793
Detent Plunger

144356793
098141A: RNCC: 3 | RNVC: 2

17 Nov 1989

5340-14-550-4985
Mounting Bracket

145504985
6801DPA110007: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-474-6228
Access Cover

144746228
45094215: RNCC: 3 | RNVC: 9

22 Feb 1995

5340-14-449-5973
Access Cover

144495973
29001918: RNCC: 3 | RNVC: 2

28 Aug 1991

5340-14-483-4395
Access Cover

144834395
F125031: RNCC: 3 | RNVC: 2

12 Sep 1996

5340-14-379-4193
Access Cover

143794193
061290460: RNCC: 3 | RNVC: 9

1 Oct 1982

5340-14-502-3650
Access Cover

145023650
E3320053: RNCC: 3 | RNVC: 9

9 Dec 1997

5340-14-483-2725
Access Cover

144832725
1MC800091: RNCC: 3 | RNVC: 2
91497007: RNCC: 5 | RNVC: 2
1MC800163: RNCC: 5 | RNVC: 2
1MC800091: RNCC: 5 | RNVC: 9
6115AA2071339: RNCC: 6 | RNVC: 9

29 Aug 1996

5340-14-384-2873
Angle Bracket

143842873
552257: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-358-3883
Anchor Strap

143583883
388557: RNCC: 3 | RNVC: 2

13 Aug 1979

5340-14-544-2794
Utility Access Door

145442794
22355-813: RNCC: 3 | RNVC: 2

17 Jan 2005

5340-14-550-9509
Access Cover

145509509
45124948: RNCC: 3 | RNVC: 2

2 Aug 2006

5340-14-532-5487
Access Cover

145325487
5610986B: RNCC: 3 | RNVC: 2

13 Nov 2002

5340-14-399-1452
Bridge Clamp

143991452
640429: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-446-1089
Mounting Bracket

144461089
ST406M11P76: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-525-4908
Access Cover

145254908
8013845G00: RNCC: 3 | RNVC: 2

6 Jun 2001

5340-14-392-6784
Access Cover

143926784
220177: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-434-3042
Access Cover

144343042
553529: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-526-8356
Access Cover

145268356
5010527529: RNCC: 3 | RNVC: 2

7 Sep 2001

5340-14-209-8380
Access Cover

142098380
73416: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-334-9335
Angle Bracket

143349335
BM428131: RNCC: 3 | RNVC: 2

2 Jun 1976

5340-14-351-0260
Access Cover

143510260
193763: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-265-1386
Loop Clamp

142651386
55219-308D507ADL: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-498-9023
Expansion Plug

144989023
E29584-520AAT: RNCC: 2 | RNVC: 2
E29584-52AAT: RNCC: 2 | RNVC: 2
F300 0T 010 8950: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-471-0312
Access Cover

144710312
J05527-12-0200P006: RNCC: 3 | RNVC: 2
263156-001: RNCC: 5 | RNVC: 2

20 Jul 1994

5340-14-326-5524
Access Cover

143265524
3511 120 69981: RNCC: 3 | RNVC: 2
3511-120-69981: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-467-7302
Detent Plunger

144677302
312-04211-001: RNCC: 3 | RNVC: 2

27 Jan 1994

5340-14-425-1166
Rigid Caster

144251166
13-201-11-13: RNCC: 3 | RNVC: 2

21 Jun 1988

5340-14-324-0315
Loop Clamp

143240315
901-700-69: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-423-2616
Clamping Catch

144232616
56600: RNCC: 3 | RNVC: 9
06185477: RNCC: 5 | RNVC: 2
10.056600: RNCC: 5 | RNVC: 9

14 Apr 1988

5340-14-543-2862
Mounting Bracket

145432862
S491A1001051: RNCC: 3 | RNVC: 2

15 Oct 2004

5340-14-447-3867
Snap Hook

144473867
2317: RNCC: 3 | RNVC: 2
91713916: RNCC: 5 | RNVC: 2
3587790023176: RNCC: 5 | RNVC: 2

15 May 1991

5340-14-516-2308
Mounting Plate

145162308
0032634: RNCC: 3 | RNVC: 2

15 Sep 1999

5340-14-516-9880
Snap Hook

145169880
A15020: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-268-1571
Rod End Clevis

142681571
1-83046: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-214-7481
Mending Plate

142147481
0000454397: RNCC: 3 | RNVC: 2
0000454397: RNCC: 5 | RNVC: 9
454397: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-217-3214
Loop Clamp

142173214
3160S73-64-912: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-544-9575
Loop Clamp

145449575
5010245425: RNCC: 3 | RNVC: 2

8 Mar 2005

5340-14-436-6360
Mounting Bracket

144366360
DA2C202481401: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-474-3886
Blank Panel

144743886
802N805: RNCC: 3 | RNVC: 2
802N805: RNCC: 5 | RNVC: 2

14 Feb 1995

5340-14-449-7156
Mounting Bracket

144497156
39467698: RNCC: 3 | RNVC: 2
39467698: RNCC: 5 | RNVC: 9

4 Sep 1991

5340-14-443-3150
Screw Hook

144433150
52549155-4: RNCC: 3 | RNVC: 2

14 Nov 1990

5340-14-384-3169
Loop Clamp

143843169
28GE14: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-516-7652
Retaining Clip

145167652
037-46031-0: RNCC: 3 | RNVC: 2
037-46031-0: RNCC: 3 | RNVC: 9

13 Oct 1999

5340-14-325-6333
Pipe Hanger

143256333
121S71-242-30-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-528-8381
Mounting Bracket

145288381
27170004-8: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-14-273-9295
Retaining Strap

142739295
2-03198: RNCC: 3 | RNVC: 2
25-98843A: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-454-8776
Mounting Bracket

144548776
5000736867: RNCC: 3 | RNVC: 2

24 Apr 1992

5340-14-376-6684
Loop Clamp

143766684
420242K: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-535-0850
Corner Brace

145350850
T700A532045910601: RNCC: 3 | RNVC: 2

7 May 2003

5340-14-455-4251
Mounting Bracket

144554251
16508674: RNCC: 3 | RNVC: 2

21 May 1992

5340-14-527-3769
Bumper

145273769
H127085: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-468-0747
Mounting Plate

144680747
LYN008055371122: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-409-9656
Retaining Strap

144099656
70326: RNCC: 3 | RNVC: 2

4 Jun 1986

5340-14-534-5256
Rigid Caster

145345256
518-8NER: RNCC: 3 | RNVC: 9
5180854: RNCC: 5 | RNVC: 9
518-8NER: RNCC: 5 | RNVC: 9
5180854: RNCC: 5 | RNVC: 9

26 Mar 2003

5340-14-413-9422
Rod End Connector

144139422
306-2N16: RNCC: 3 | RNVC: 2
129APFN16: RNCC: 5 | RNVC: 2
306-2TYPEND16: RNCC: 5 | RNVC: 2

22 Jan 1987

5340-14-371-6173
Arched Cushion

143716173
650-403-026-0: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-395-5310
Mounting Bracket

143955310
5-1881B43152-1178: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-369-2690
Flush Catch Claw

143692690
366A25-1017-00: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-230-0714
Eye Hook

142300714
9210002000: RNCC: 3 | RNVC: 2
9-210002-000: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-398-9764
Access Cover

143989764
NO PRIMARY REF14-398-9764: RNCC: 3 | RNVC: 2
D40-23873: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-399-9733
Butt Hinge

143999733
996024: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-429-3542
Plate Spacer

144293542
050924Z01TM79: RNCC: 3 | RNVC: 2
050924Z: RNCC: 5 | RNVC: 2

18 Jan 1989

5340-14-541-0246
Retaining Strap

145410246
314421: RNCC: 3 | RNVC: 9
314421.10: RNCC: 5 | RNVC: 9

5 May 2004

5340-14-363-7404
Angle Bracket

143637404
A11A211174110: RNCC: 3 | RNVC: 2

6 Jul 1980

5340-14-409-1557
Mounting Plate

144091557
1540014: RNCC: 3 | RNVC: 2
1540014: RNCC: 5 | RNVC: 2

16 Apr 1986

5340-14-464-3167
Mounting Plate

144643167
406025465: RNCC: 3 | RNVC: 9

28 Jul 1993

5340-14-496-0084
Webbing Strap

144960084
NM099: RNCC: 3 | RNVC: 9
F300 0T 020 7558: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-423-9692
Mounting Plate

144239692
CD251101: RNCC: 3 | RNVC: 2
11483NOIR: RNCC: 5 | RNVC: 2
PP127070: RNCC: 5 | RNVC: 2
5000587659: RNCC: 5 | RNVC: 2

5 May 1988

5340-14-462-9905
Runner

144629905
MB1691F00: RNCC: 3 | RNVC: 2

12 May 1993

5340-14-339-3262
Leaf Spring

143393262
0038724684: RNCC: 3 | RNVC: 2
0038724684: RNCC: 5 | RNVC: 9

18 Jan 1977

5340-14-323-3562
Angle Bracket

143233562
466-9M7P51: RNCC: 3 | RNVC: 2
466-9M7P51: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-445-9236
Mounting Bracket

144459236
P711989: RNCC: 3 | RNVC: 2

27 Feb 1991

5340-14-502-2135
Access Cover

145022135
0390737860: RNCC: 3 | RNVC: 2
6106147180: RNCC: 5 | RNVC: 9

26 Nov 1997

5340-14-486-3032
Runner

144863032
MP1456F00: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-537-4866
Mounting Plate

145374866
6501DME110088: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-427-1852
Rod End Clevis

144271852
MBEU72559: RNCC: 3 | RNVC: 2
035466: RNCC: 5 | RNVC: 2

6 Oct 1988

5340-14-522-6971
Pipe Hanger

145226971
01248024: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-14-474-3978
Blank Panel

144743978
802L742: RNCC: 3 | RNVC: 2
802L742: RNCC: 5 | RNVC: 2

15 Feb 1995

5340-14-449-4976
Retaining Strap

144494976
023906J: RNCC: 3 | RNVC: 2

21 Aug 1991

5340-14-290-1244
Access Cover

142901244
P563BR0NZE: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-335-3189
Mending Plate

143353189
190666: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-437-4229
Mounting Plate

144374229
3005016: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-471-4636
Mounting Bracket

144714636
39527709: RNCC: 3 | RNVC: 2
39527709: RNCC: 5 | RNVC: 9

30 Aug 1994

5340-14-202-8472
Bumper

142028472
10080AF: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-553-6836
Mounting Plate

145536836
82089417000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-549-0607
Angle Bracket

145490607
RA1M216900411A1N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-482-1117
Loop Clamp

144821117
1199052002: RNCC: 3 | RNVC: 9
77051630: RNCC: 5 | RNVC: 2
91240895: RNCC: 5 | RNVC: 2

20 Jun 1996

5340-14-555-2206
Mounting Bracket

145552206
82166627000: RNCC: 3 | RNVC: 2

10 Oct 2007

5340-14-534-2926
Webbing Strap

145342926
10684346000: RNCC: 3 | RNVC: 2

19 Mar 2003

5340-14-526-5015
Mounting Plate

145265015
GA66094: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-463-7177
Mounting Bracket

144637177
202376: RNCC: 3 | RNVC: 2
89170676: RNCC: 5 | RNVC: 2

23 Jun 1993

5340-14-406-3873
Control Rod

144063873
00011585TE9310: RNCC: 3 | RNVC: 9
PN3R30308: RNCC: 5 | RNVC: 9

8 Jan 1986

5340-14-444-8261
Mounting Bracket

144448261
123805110: RNCC: 3 | RNVC: 9

23 Jan 1991

5340-14-575-4446
Utility Access Door

145754446
CAP-Q15097X0V: RNCC: 3 | RNVC: 2

8 Apr 2013

5340-14-205-4744
Loop Clamp

142054744
501-455-005-0: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-534-5255
Swivel Caster

145345255
1 351 6523: RNCC: 3 | RNVC: 9
13516523: RNCC: 5 | RNVC: 9
1351-6523: RNCC: 5 | RNVC: 9
13516523: RNCC: 5 | RNVC: 9

26 Mar 2003

5340-14-304-4746
Bail Handle

143044746
1266012: RNCC: 3 | RNVC: 2
050A13-100000-0100: RNCC: 5 | RNVC: 2
1266012: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-444-9361
Loop Clamp

144449361
167-060-009: RNCC: 3 | RNVC: 2

29 Jan 1991

5340-14-496-9162
Mounting Plate

144969162
490127-32020-42: RNCC: 3 | RNVC: 2
F300 0T 022 2659: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-546-1776
Angle Bracket

145461776
RA1A703145111: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-486-5115
Retaining Strap

144865115
10068059: RNCC: 3 | RNVC: 2

21 Mar 1997

5340-14-548-8127
Access Cover

145488127
RA1B621263830: RNCC: 3 | RNVC: 2

14 Feb 2006

5340-14-408-0846
Access Cover

144080846
30311976MAB: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-347-9859
Angle Bracket

143479859
420075: RNCC: 3 | RNVC: 2
420075: RNCC: 5 | RNVC: 9

29 Mar 1978

5340-14-386-0540
Angle Bracket

143860540
16806137: RNCC: 3 | RNVC: 2
16806137: RNCC: 3 | RNVC: 9

24 Aug 1983

5340-14-550-9061
Retaining Bail

145509061
RA1B794300821: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-511-3225
Synchro Clamp

145113225
S2155DB: RNCC: 3 | RNVC: 2

16 Dec 1998

5340-14-394-9475
Mending Plate

143949475
20320451: RNCC: 3 | RNVC: 2
20320451: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-440-3030
Mounting Bracket

144403030
155812: RNCC: 3 | RNVC: 9
89410784: RNCC: 5 | RNVC: 2
155812: RNCC: 5 | RNVC: 9

11 Jul 1990

5340-14-550-9188
Angle Bracket

145509188
RA1B702206421: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-409-0243
Angle Bracket

144090243
20724039-9: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-511-1021
Loop Clamp

145111021
22901602: RNCC: 3 | RNVC: 2
9610066500: RNCC: 5 | RNVC: 2

2 Dec 1998

5340-14-516-4216
Block Clamp

145164216
91300072404: RNCC: 3 | RNVC: 2
SDM91300072404: RNCC: 5 | RNVC: 9

22 Sep 1999

5340-14-391-8806
Bumper

143918806
LXA55ABM10: RNCC: 3 | RNVC: 9

21 Mar 1984

5340-14-502-6171
Angle Bracket

145026171
5010283134: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-409-3706
Access Cover

144093706
4771653520: RNCC: 3 | RNVC: 2
313352: RNCC: 5 | RNVC: 2

28 May 1986

5340-14-381-7866
Mounting Plate

143817866
16761992: RNCC: 3 | RNVC: 2
16761992: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-481-5652
Access Cover

144815652
38757675: RNCC: 3 | RNVC: 2
38757675: RNCC: 5 | RNVC: 9

16 May 1996

5340-14-543-5745
Mounting Bracket

145435745
E0708G0C: RNCC: 3 | RNVC: 2

23 Nov 2004

5340-14-439-2165
Mounting Bracket

144392165
16380363: RNCC: 3 | RNVC: 2
16380363: RNCC: 5 | RNVC: 9

25 Apr 1990

5340-14-518-0656
Mounting Bracket

145180656
311-40038: RNCC: 3 | RNVC: 9

25 Jan 2000

5340-14-501-6848
Mounting Plate

145016848
45280320: RNCC: 3 | RNVC: 2
45280320: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-349-3711
Access Cover

143493711
10531: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-472-3413
Loop Clamp

144723413
14085: RNCC: 3 | RNVC: 2

19 Oct 1994

5340-14-552-0326
Access Cover

145520326
0249500270: RNCC: 3 | RNVC: 2

21 Nov 2006

5340-14-539-3563
Mounting Bracket

145393563
AL100047: RNCC: 3 | RNVC: 2

7 Jan 2004

5340-14-501-6368
Cushioning Pad

145016368
4SHS5030005: RNCC: 3 | RNVC: 2

5 Nov 1997

5340-14-535-0459
Bumper

145350459
T524A2001315: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-14-309-5366
Anchor Strap

143095366
70240041: RNCC: 3 | RNVC: 2
70240041: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-303-8371
Handle Grip

143038371
R28853SMDET2: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-504-2411
Mounting Bracket

145042411
3595185M2: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-460-0748
Angle Bracket

144600748
PM1A216810010A1: RNCC: 3 | RNVC: 2
PM1A216810010A1: RNCC: 5 | RNVC: 2

7 Jan 1993

5340-14-272-7484
Loop Clamp

142727484
215879: RNCC: 3 | RNVC: 2
215879: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-523-5255
Runner

145235255
C0056: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-14-418-4916
Loop Clamp

144184916
25035: RNCC: 3 | RNVC: 2

26 Aug 1987

5340-14-487-5606
Pipe Hanger

144875606
RA1M701712170A1: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-526-9566
Mounting Bracket

145269566
10606053: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-544-0338
Mounting Plate

145440338
AMPC GENE E227300: RNCC: 3 | RNVC: 2

23 Dec 2004

5340-14-555-3618
Loop Clamp

145553618
78651DH12AF: RNCC: 1 | RNVC: 2
78651DH12AF: RNCC: 3 | RNVC: 2

30 Oct 2007

5340-14-394-9202
Mounting Plate

143949202
20732860: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-561-2725
Utility Resilient Mount

145612725
123324: RNCC: 3 | RNVC: 2
7421479829: RNCC: 5 | RNVC: 2

1 Jul 2009

5340-14-377-1791
Mending Plate

143771791
211726: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-360-6733
Access Cover

143606733
6413-02074: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-483-1432
Buckle

144831432
94101-040-425: RNCC: 3 | RNVC: 2
197109-040: RNCC: 5 | RNVC: 2
97101-040-425: RNCC: 5 | RNVC: 9

15 Aug 1996

5340-14-330-6936
Access Cover

143306936
4944034220: RNCC: 3 | RNVC: 2
9440-128-02: RNCC: 5 | RNVC: 2
9440-128-02: RNCC: 5 | RNVC: 9
85-659-1411: RNCC: 6 | RNVC: 9
85-694-9711: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-384-9268
Rod End Clevis

143849268
9970-146-501: RNCC: 3 | RNVC: 2

2 Jun 1983

5340-14-252-9412
Retaining Strap

142529412
1521-63-242: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-341-1694
Access Cover

143411694
M3C701-42-02: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-464-8916
Mounting Bracket

144648916
312-10398-001: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-218-0713
Loop Clamp

142180713
NO PRIMARY REF14-218-0713: RNCC: 3 | RNVC: 2
61397: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-493-6449
Mounting Plate

144936449
A01968-00-0000P003: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-456-3712
Mounting Bracket

144563712
728084S200-21A: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-14-389-8302
Angle Bracket

143898302
837043/005: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-307-1239
Bow Handle

143071239
3511-210-06411: RNCC: 3 | RNVC: 2
3511 210 06411: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-510-8707
Access Cover

145108707
EA2M281-11-840: RNCC: 3 | RNVC: 2
85-695-4651: RNCC: 6 | RNVC: 9

18 Nov 1998

5340-14-393-1245
Retaining Strap

143931245
02135067400: RNCC: 3 | RNVC: 2
021350674: RNCC: 5 | RNVC: 2

12 Apr 1984

5340-14-551-3380
Pipe Hanger

145513380
RA1A702416107: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-520-4714
Mounting Bracket

145204714
10501404: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-549-8300
Mounting Bracket

145498300
2092585: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-392-5378
Angle Bracket

143925378
A21A221243137: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-489-6789
Mounting Bracket

144896789
332A87-1181-00: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-542-1365
Clamping Catch

145421365
GP-13-IB: RNCC: 3 | RNVC: 2
GP13IB: RNCC: 5 | RNVC: 2

8 Jul 2004

5340-14-520-9750
Mounting Bracket

145209750
010002010P: RNCC: 3 | RNVC: 2

27 Jun 2000

5340-14-553-6162
Mounting Bracket

145536162
355R69-1006-00: RNCC: 3 | RNVC: 2

24 Apr 2007

5340-14-316-1549
Synchro Clamp

143161549
NO PRIMARY REF14-316-1549: RNCC: 3 | RNVC: 2
137211: RNCC: 5 | RNVC: 9
C137211: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-353-3887
Angle Bracket

143533887
21312396-02: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-544-3503
Mounting Plate

145443503
332A22-1465-79: RNCC: 3 | RNVC: 2

21 Jan 2005

5340-14-342-4601
Rod End Clevis

143424601
ST406M72P232: RNCC: 3 | RNVC: 2
50-1031: RNCC: 5 | RNVC: 2

16 May 1977

5340-14-531-2211
Mounting Bracket

145312211
341A65-7879-29: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-473-6509
Mounting Plate

144736509
332A31-1857-20: RNCC: 3 | RNVC: 2
332A51-1857-20: RNCC: 5 | RNVC: 9

4 Jan 1995

5340-14-301-1046
Pipe Hanger

143011046
330A72-6615-20: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-449-3599
Section Block Clamp

144493599
R4A703-52-01: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-328-4606
Bridge Clamp

143284606
GSM424-057F14: RNCC: 3 | RNVC: 2
GSM424-57F14: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-267-2141
Retaining Strap

142672141
23310-01-1010P040: RNCC: 3 | RNVC: 2
233-21-219-05: RNCC: 5 | RNVC: 2

21 Jun 1989

5340-14-529-9071
Mounting Bracket

145299071
160-888073-10: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-364-6704
Access Cover

143646704
182946: RNCC: 3 | RNVC: 2
0308102120: RNCC: 5 | RNVC: 2
043-03-01-018: RNCC: 5 | RNVC: 2

2 Sep 1980

5340-14-344-9198
Access Cover

143449198
J00790-03-2022P002: RNCC: 3 | RNVC: 2

9 Sep 1977

5340-14-412-4848
Access Cover

144124848
NO PRIMARY REF14-412-4848: RNCC: 3 | RNVC: 2
P1C003187-00: RNCC: 5 | RNVC: 9

15 Oct 1986

5340-14-298-0160
Handwheel

142980160
B0120TV9EREP18: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-542-2979
Mounting Bracket

145422979
954662608: RNCC: 3 | RNVC: 2
954662608: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-446-3255
Mounting Plate

144463255
5000545199: RNCC: 3 | RNVC: 2

13 Mar 1991

5340-14-383-9627
Retaining Band

143839627
0000776131: RNCC: 3 | RNVC: 2
0000776131: RNCC: 5 | RNVC: 9

4 May 1983

5340-14-395-7284
Loop Clamp

143957284
DAS074: RNCC: 3 | RNVC: 2
ATP14A: RNCC: 5 | RNVC: 2
78723DH14: RNCC: 5 | RNVC: 2

30 Oct 1984

5340-14-348-1896
Retaining Strap

143481896
C47747: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-554-1486
Mounting Bracket

145541486
82051071001: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-536-2158
Mounting Bracket

145362158
RA1M216900121N1: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-14-528-4431
Bumper

145284431
5838002M00: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-496-4574
Mounting Plate

144964574
474066: RNCC: 3 | RNVC: 2
F300 0T 021 5504: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-536-5116
Expansion Shield

145365116
50506: RNCC: 3 | RNVC: 2
SC086579: RNCC: 6 | RNVC: 9

28 Aug 2003

5340-14-526-9697
Mounting Plate

145269697
10505400: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-539-5464
Cover Strip

145395464
SZ09.250.966: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-550-3444
Mounting Bracket

145503444
2716413010: RNCC: 3 | RNVC: 2

16 Jun 2006

5340-14-554-1144
Loop Clamp

145541144
352 376: RNCC: 3 | RNVC: 2
352 376: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-537-0520
Mounting Bracket

145370520
527000311: RNCC: 3 | RNVC: 2
SYQ3670: RNCC: 5 | RNVC: 2

24 Sep 2003

5340-14-554-3514
Mounting Bracket

145543514
82191120000: RNCC: 3 | RNVC: 2

22 Jun 2007

5340-14-481-4657
Mounting Bracket

144814657
34 98 99: RNCC: 3 | RNVC: 2

8 May 1996

5340-14-553-0556
Mounting Bracket

145530556
RA1M122181201A1: RNCC: 3 | RNVC: 2

27 Feb 2007

5340-14-397-7289
Expansion Plug

143977289
16017300J: RNCC: 3 | RNVC: 2
T18891: RNCC: 5 | RNVC: 2

14 Dec 1984

5340-14-548-9990
Mounting Plate

145489990
PA03728A: RNCC: 3 | RNVC: 2

28 Feb 2006

5340-14-441-0328
Mounting Bracket

144410328
007637031P: RNCC: 3 | RNVC: 2

14 Aug 1990

5340-14-475-7693
Webbing Strap

144757693
46235845: RNCC: 3 | RNVC: 2
46235845: RNCC: 3 | RNVC: 9

3 May 1995

5340-14-040-2723
Angle Bracket

140402723
NO PRIMARY REF14-040-2723: RNCC: 3 | RNVC: 2
S266230: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-509-6843
Loop Clamp

145096843
3-22609-12-20A: RNCC: 3 | RNVC: 2
3-22609-12-20A: RNCC: 5 | RNVC: 2

28 Oct 1998

5340-14-508-6613
Angle Bracket

145086613
JGA05-82: RNCC: 3 | RNVC: 2

23 Sep 1998

5340-14-493-9306
Mounting Bracket

144939306
S41-201501: RNCC: 3 | RNVC: 2
S41-201501: RNCC: 5 | RNVC: 2
S41-201501: RNCC: 5 | RNVC: 9
F300 0T 014 6227: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-214-3766
Loop Clamp

142143766
51123105011: RNCC: 3 | RNVC: 2
253191100: RNCC: 5 | RNVC: 2
24GE11: RNCC: 5 | RNVC: 9
25GE11: RNCC: 5 | RNVC: 9
A0021-25GE11: RNCC: 5 | RNVC: 9
24GE11: RNCC: 8 | RNVC: 2

1 Jan 1965

5340-14-301-4558
Butt Hinge

143014558
J36-190-120X100LAIT0N: RNCC: 4 | RNVC: 1

1 Jan 1973

5340-14-385-5933
Retaining Strap

143855933
CRP23-11-26: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-282-6181
Rod End Clevis

142826181
121E26-750-07-0: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-399-7586
Webbing Strap

143997586
4-444-00P07-01B: RNCC: 3 | RNVC: 2
4-444-00P05-02U1,2M: RNCC: 5 | RNVC: 2

14 Mar 1985

5340-14-354-3886
Angle Bracket

143543886
21312215: RNCC: 3 | RNVC: 2
21312215-00: RNCC: 5 | RNVC: 2
21312215-9: RNCC: 5 | RNVC: 2

31 Jan 1979

5340-14-337-9516
Rod End Clevis

143379516
A21-1-1-10-2: RNCC: 3 | RNVC: 2
A21-1-1-10-2: RNCC: 3 | RNVC: 9

6 Nov 1976

5340-14-438-4065
Bumper

144384065
53303: RNCC: 3 | RNVC: 9
10.05330.3: RNCC: 5 | RNVC: 9
1005330-03: RNCC: 5 | RNVC: 9
583567: RNCC: 5 | RNVC: 9
F300 0T 009 9708: RNCC: 6 | RNVC: 9

21 Mar 1990

5340-14-416-7898
Rod End Connector

144167898
1101616: RNCC: 3 | RNVC: 9

25 Jun 1987

5340-14-497-4099
Friction Catch

144974099
NO PRIMARY REF14-497-4099: RNCC: 3 | RNVC: 2
404-500-010: RNCC: 5 | RNVC: 2
404-500-010: RNCC: 5 | RNVC: 9
F300 0T 023 1395: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-417-3157
Webbing Strap

144173157
253791-1: RNCC: 3 | RNVC: 2
253791-1: RNCC: 5 | RNVC: 9

1 Jul 1987

5340-14-360-7603
Access Cover

143607603
21604-04: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-355-3541
Rigid Caster

143553541
0176-252017-1: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-305-4055
Loop Clamp

143054055
305300652: RNCC: 3 | RNVC: 2
30S6-5: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-528-3785
Mounting Plate

145283785
27119711-8: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-14-431-7558
Angle Bracket

144317558
23607603-0: RNCC: 3 | RNVC: 2

10 May 1989

5340-14-548-4990
Mounting Bracket

145484990
838893: RNCC: 3 | RNVC: 2
838893-6: RNCC: 3 | RNVC: 2

23 Jan 2006

5340-14-387-5648
Loop Clamp

143875648
686102: RNCC: 3 | RNVC: 2
3643361: RNCC: 5 | RNVC: 2
686-102: RNCC: 5 | RNVC: 2
SKB-2: RNCC: 5 | RNVC: 2
3643361: RNCC: 5 | RNVC: 9

15 Sep 1983

5340-14-539-4246
Rod End Clevis

145394246
21224368-00: RNCC: 3 | RNVC: 2
21224368-6: RNCC: 5 | RNVC: 2

14 Jan 2004

5340-14-250-8146
Snap Hook

142508146
22217-360-032: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-444-0667
Butt Hinge

144440667
A562376: RNCC: 3 | RNVC: 2
16-070-01-03: RNCC: 3 | RNVC: 9

18 Dec 1990

5340-14-432-2442
Caster Frame

144322442
TP3BR100: RNCC: 3 | RNVC: 2

31 May 1989

5340-14-569-5149
Utility Access Door

145695149
IND PTP 8042: RNCC: 3 | RNVC: 9
AA024595: RNCC: 6 | RNVC: 9

22 Sep 2011

5340-14-409-1748
Butt Hinge

144091748
4003-40X2000INOSPERCEEFRAISEE: RNCC: 3 | RNVC: 2

23 Apr 1986

5340-14-480-5563
Mounting Plate

144805563
T1082AA15: RNCC: 3 | RNVC: 2
380869: RNCC: 5 | RNVC: 9
T1082AA15: RNCC: 5 | RNVC: 9

14 Mar 1996

5340-14-312-0837
Loop Clamp

143120837
164012: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-508-7920
Runner

145087920
PE 12675: RNCC: 3 | RNVC: 2
PE12675: RNCC: 5 | RNVC: 9

30 Sep 1998

5340-14-261-6419
Retaining Strap

142616419
24055005600: RNCC: 3 | RNVC: 2
240550056: RNCC: 5 | RNVC: 9
55J56: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-531-2412
Webbing Strap

145312412
F1264746: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-543-7277
Angle Bracket

145437277
943378596: RNCC: 3 | RNVC: 2

4 Dec 2004

5340-14-031-1647
Angle Bracket

140311647
VDP4292: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-512-9050
Protection Bellows

145129050
552645: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-396-5523
Mounting Plate

143965523
E88565B: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-531-7982
Mounting Bracket

145317982
06930P037113: RNCC: 3 | RNVC: 2
06300097: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-577-5732
Utility Resilient Mount

145775732
MDS81L014: RNCC: 3 | RNVC: 2

25 Sep 2013

5340-14-531-8592
Mounting Bracket

145318592
19A650: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-14-543-8914
Mounting Bracket

145438914
251534213: RNCC: 3 | RNVC: 2

14 Dec 2004

5340-14-427-7329
Loop Clamp

144277329
0249730070: RNCC: 3 | RNVC: 2

9 Nov 1988

5340-14-496-4832
Loop Clamp

144964832
925002903: RNCC: 3 | RNVC: 2
F300 0T 021 5785: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-543-6706
Mounting Bracket

145436706
AMPC GENE E223466: RNCC: 3 | RNVC: 2

2 Dec 2004

5340-14-501-4637
Control Rod

145014637
NO PRIMARY REF14-501-4637: RNCC: 3 | RNVC: 2
NNP5340844556201: RNCC: 5 | RNVC: 9

29 Oct 1997

5340-14-572-8395
Utility Resilient Mount

145728395
E1N-3455-54: RNCC: 3 | RNVC: 2

9 Aug 2012

5340-14-489-6501
Mounting Bracket

144896501
332A21-1556-20: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-463-6315
Rim Lock Set

144636315
PE75029-6A: RNCC: 3 | RNVC: 2

22 Jun 1993

5340-14-542-0563
Loop Clamp

145420563
25292111-012: RNCC: 3 | RNVC: 2
502122005030A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-361-5249
Control Rod

143615249
GSM137-0033F6: RNCC: 3 | RNVC: 2
GSM137-033F6: RNCC: 5 | RNVC: 2

24 Jan 1980

5340-14-334-7948
Door Hook

143347948
J36-131-120LAIT0N: RNCC: 2 | RNVC: 2

2 Jun 1976

5340-14-302-8897
Handwheel

143028897
773-210-065FF7: RNCC: 3 | RNVC: 2
773-210-065FF7: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-217-8967
Retaining Strap

142178967
3160S50-00-307: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-551-0408
Bow Handle

145510408
NO PRIMARY REF14-551-0408: RNCC: 3 | RNVC: 2
13162-3628: RNCC: 5 | RNVC: 2
ZN36X28: RNCC: 5 | RNVC: 2

24 Aug 2006

5340-14-289-8616
Loop Clamp

142898616
M3E702-365: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-444-5202
Anchor Strap

144445202
9109-10: RNCC: 3 | RNVC: 2
7920059438: RNCC: 5 | RNVC: 2

14 Jan 1991

5340-14-477-6163
Access Cover

144776163
785-0126A03: RNCC: 3 | RNVC: 2
89138803: RNCC: 5 | RNVC: 2

13 Sep 1995

5340-14-496-8856
Mounting Bracket

144968856
NO PRIMARY REF14-496-8856: RNCC: 3 | RNVC: 2
25302-89032: RNCC: 5 | RNVC: 9
F300 0T 022 2348: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-367-2439
Pipe Hanger

143672439
271642: RNCC: 3 | RNVC: 2
85-691-3695: RNCC: 6 | RNVC: 9

11 Dec 1980

5340-14-338-3373
Handwheel

143383373
GSM137-013F10: RNCC: 3 | RNVC: 2
GSM137-13F10: RNCC: 5 | RNVC: 2

6 Nov 1976

5340-14-489-1953
Access Cover

144891953
75-12-500-01: RNCC: 3 | RNVC: 2
F300 0T 019 1927: RNCC: 6 | RNVC: 9

2 Jul 1997

5340-14-479-3466
Mounting Plate

144793466
AT004PD5005902: RNCC: 3 | RNVC: 9

10 Jan 1996

5340-14-497-5612
Mounting Bracket

144975612
B26-1192: RNCC: 3 | RNVC: 2
F300 0T 023 3605: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-400-0701
Retaining Strap

144000701
158719: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-532-1346
Mounting Plate

145321346
5010559906: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-14-479-1420
Loop Clamp

144791420
NSA5585C8: RNCC: 1 | RNVC: 2
5585C8: RNCC: 3 | RNVC: 2
NSA5585C8: RNCC: 5 | RNVC: 2
82505C8: RNCC: 5 | RNVC: 2
NSA5585C8: RNCC: 5 | RNVC: 2

13 Dec 1995

5340-14-407-1951
Angle Bracket

144071951
71749: RNCC: 3 | RNVC: 2

12 Feb 1986

5340-14-469-4317
Protection Bellows

144694317
17340300: RNCC: 3 | RNVC: 2

25 Apr 1994

5340-14-502-7467
Runner

145027467
5V2538: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-257-7553
Retaining Strap

142577553
42002: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-345-0132
Webbing Strap

143450132
001373282P: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-554-3298
Mounting Bracket

145543298
82093909000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-551-4975
Turnbuckle Body

145514975
RA1B701207661N1: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-448-9749
Angle Bracket

144489749
BAZ98051: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-14-343-8524
Clamping Catch

143438524
GE40EIP: RNCC: 3 | RNVC: 2
0175972R00: RNCC: 5 | RNVC: 2
GE401IP: RNCC: 5 | RNVC: 2
GE401P: RNCC: 5 | RNVC: 2

13 Jul 1977

5340-14-502-5051
Mounting Bracket

145025051
5000446716: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-377-2100
Runner

143772100
556747G0001: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-551-9786
Blank Panel

145519786
82165633000: RNCC: 3 | RNVC: 2

15 Nov 2006

5340-14-551-6070
Angle Bracket

145516070
82187639000: RNCC: 3 | RNVC: 2

9 Oct 2006

5340-14-553-0487
Support Hook

145530487
RA1B219102501U2N1: RNCC: 3 | RNVC: 2

27 Feb 2007

5340-14-414-8913
Control Rod

144148913
2416058026: RNCC: 3 | RNVC: 2
DLT611377: RNCC: 5 | RNVC: 2

18 Mar 1987

5340-14-457-0223
Mounting Plate

144570223
TS120201: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-14-522-4827
Retaining Strap

145224827
21S0601002: RNCC: 3 | RNVC: 2
21S0601002: RNCC: 5 | RNVC: 2

31 Oct 2000

5340-14-551-5026
Angle Bracket

145515026
RA1M703375411: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-544-3560
Mounting Plate

145443560
S257A1018122: RNCC: 3 | RNVC: 2

24 Jan 2005

5340-14-560-9187
Utility Access Door

145609187
MB7141F00: RNCC: 3 | RNVC: 2

2 Jun 2009

5340-14-439-1985
Mounting Bracket

144391985
16043909: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-541-2368
Mounting Bracket

145412368
224598: RNCC: 3 | RNVC: 2

19 May 2004

5340-14-361-1951
Bumper

143611951
BAZ6103: RNCC: 3 | RNVC: 2
BAZ6103: RNCC: 3 | RNVC: 2
061275X: RNCC: 5 | RNVC: 2

24 Jan 1980

5340-14-543-4315
Protection Bellows

145434315
200003: RNCC: 3 | RNVC: 2
200003: RNCC: 5 | RNVC: 2

28 Oct 2004

5340-14-480-0863
Shelf Bracket

144800863
RA1M111337320: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-461-0484
Mounting Bracket

144610484
TB4011805: RNCC: 3 | RNVC: 2

22 Feb 1993

5340-14-459-8487
Mounting Plate

144598487
45673728: RNCC: 3 | RNVC: 2
091-100-08-02: RNCC: 5 | RNVC: 2
45673728: RNCC: 5 | RNVC: 9

17 Dec 1992

5340-14-222-6465
Strap Fastener Loop

142226465
2559J: RNCC: 3 | RNVC: 2
LFP54-418: RNCC: 3 | RNVC: 2
2559J: RNCC: 5 | RNVC: 9
LFP54-418: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-430-9341
Angle Bracket

144309341
G230010-05: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-14-434-5227
Angle Bracket

144345227
21-56-25-1: RNCC: 3 | RNVC: 2
21-56-25-1: RNCC: 5 | RNVC: 2

20 Sep 1989

5340-14-379-2176
Clamping Catch

143792176
55208: RNCC: 3 | RNVC: 2
501-993-007-0: RNCC: 5 | RNVC: 2
85-691-7761: RNCC: 6 | RNVC: 9

6 Sep 1982

5340-14-481-3382
Swivel Caster

144813382
UP5BD160-27R: RNCC: 3 | RNVC: 2
1112945B00: RNCC: 5 | RNVC: 2

1 May 1996

5340-14-339-2817
Expansion Plug

143392817
7903075016: RNCC: 3 | RNVC: 2
7903075016: RNCC: 3 | RNVC: 2
7046066303: RNCC: 5 | RNVC: 2
0233-05: RNCC: 5 | RNVC: 2
7046066303: RNCC: 5 | RNVC: 9
79-03-075-016: RNCC: 5 | RNVC: 9

18 Jan 1977

5340-14-285-2016
Threaded Rod End

142852016
A10-76-423-04-0: RNCC: 3 | RNVC: 2
A10-76-423-04-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-300-9607
Bumper

143009607
341A92-1126-20: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-361-4259
Angle Bracket

143614259
NO PRIMARY REF14-361-4259: RNCC: 3 | RNVC: 2
F75BB0101-264: RNCC: 5 | RNVC: 9
85-689-9716: RNCC: 6 | RNVC: 9

24 Jan 1980

5340-14-411-9409
Cushioning Pad

144119409
M4Z6101916246: RNCC: 3 | RNVC: 2

19 Sep 1986

5340-14-293-8919
Bumper

142938919
EQDIV43-06-2: RNCC: 3 | RNVC: 2
EQDIV43-06REP2: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-539-6538
Synchro Clamp

145396538
21231977-00: RNCC: 3 | RNVC: 2
21231977-4: RNCC: 5 | RNVC: 2

28 Jan 2004

5340-14-379-7452
Access Cover

143797452
M389-200017: RNCC: 3 | RNVC: 2
27101423-6: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-405-0173
Loop Clamp

144050173
51121905030: RNCC: 3 | RNVC: 2
24PE30: RNCC: 5 | RNVC: 2
25PE30: RNCC: 5 | RNVC: 2
85-693-1681: RNCC: 6 | RNVC: 9

20 Nov 1985

5340-14-370-0645
Anchor Strap

143700645
7123-355-00: RNCC: 3 | RNVC: 9
ROT7123-355-00: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-395-5672
Mending Plate

143955672
5-1881B43152-180: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-377-1648
Anchor Strap

143771648
NO PRIMARY REF14-377-1648: RNCC: 3 | RNVC: 2
7439: RNCC: 5 | RNVC: 9
2-007439-2: RNCC: 5 | RNVC: 9

17 May 1982

5340-14-486-3852
Access Cover

144863852
620-375-025-0: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-483-8179
Angle Bracket

144838179
JVHT260106: RNCC: 3 | RNVC: 2

3 Oct 1996

5340-14-543-9364
Mounting Bracket

145439364
T943A30T0014: RNCC: 1 | RNVC: 2
B110A002: RNCC: 3 | RNVC: 2

17 Dec 2004

5340-14-507-0454
Mounting Bracket

145070454
0031698: RNCC: 3 | RNVC: 2

5 Jun 1998

5340-14-536-3687
Mounting Plate

145363687
1SH41757430: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-14-553-6890
Mounting Bracket

145536890
82184206000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-348-3519
Loop Clamp

143483519
123319060: RNCC: 3 | RNVC: 2
PF12A3CN6: RNCC: 5 | RNVC: 2
PF12A3CN6: RNCC: 5 | RNVC: 9
PF12A3CN6: RNCC: 5 | RNVC: 9
PF12A3NC6: RNCC: 5 | RNVC: 9

29 Mar 1978

5340-14-379-0104
Bumper

143790104
16798174: RNCC: 3 | RNVC: 2
16798174: RNCC: 3 | RNVC: 9

6 Sep 1982

5340-14-413-9691
Retaining Strap

144139691
ST400S60P180: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-495-7465
Mounting Bracket

144957465
3433148: RNCC: 3 | RNVC: 2
F300 0T 019 9361: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-235-1460
Retaining Strap

142351460
45501: RNCC: 3 | RNVC: 9

1 Jan 1967

5340-14-512-5637
Metal Grille

145125637
S8576465: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-509-2996
Door Hook

145092996
H117776: RNCC: 3 | RNVC: 2

27 Oct 1998

5340-14-509-3480
Mounting Plate

145093480
46302499: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-400-9383
Butt Hinge

144009383
A11A232010061: RNCC: 3 | RNVC: 2

21 May 1985

5340-14-348-7058
Bail Handle

143487058
1556123: RNCC: 3 | RNVC: 2
1556123: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-405-2554
Angle Bracket

144052554
1260202: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-212-2894
Angle Bracket

142122894
301923: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-381-4640
Runner

143814640
2206-821C548: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-550-4689
Angle Bracket

145504689
RA1B701712511N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-516-5332
Bumper

145165332
0269003: RNCC: 3 | RNVC: 2

1 Oct 1999

5340-14-521-6299
Retaining Bail

145216299
160-888222: RNCC: 3 | RNVC: 2

30 Aug 2000

5340-14-361-1747
Runner

143611747
BAZ94368: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-483-5230
Mounting Plate

144835230
1097658M00: RNCC: 3 | RNVC: 2

18 Sep 1996

5340-14-541-5464
Mounting Plate

145415464
31104084: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-455-5677
Mounting Bracket

144555677
1060208: RNCC: 3 | RNVC: 2
1060208: RNCC: 5 | RNVC: 9
5044655: RNCC: 5 | RNVC: 9

28 May 1992

5340-14-455-6548
Handwheel

144556548
4002-68-42-13-05: RNCC: 3 | RNVC: 2
4002-68-42-1305: RNCC: 5 | RNVC: 2

4 Jun 1992

5340-14-492-3558
Mounting Bracket

144923558
NO PRIMARY REF14-492-3558: RNCC: 3 | RNVC: 2
5000107044: RNCC: 5 | RNVC: 9
F300 0T 007 4438: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-213-1576
Bridge Clamp

142131576
T863-56M1P95A: RNCC: 3 | RNVC: 2
T86356M1P95: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-424-1205
Mounting Plate

144241205
3160S25-28-271: RNCC: 3 | RNVC: 2

17 May 1988

5340-14-335-0506
Handwheel

143350506
MAT137-003F6AVIORB: RNCC: 3 | RNVC: 2
GSM137-07F18AVI0RB: RNCC: 5 | RNVC: 2
GSM137-007F18AVI0RB: RNCC: 5 | RNVC: 2

2 Jun 1976

5340-14-412-2040
Angle Bracket

144122040
331A32-2860-00: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-368-4012
Loop Clamp

143684012
262-50-63186-01: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-14-489-6783
Mounting Bracket

144896783
332A76-0112-22: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-503-3383
Mounting Bracket

145033383
47136119: RNCC: 3 | RNVC: 2
47136119-003: RNCC: 5 | RNVC: 2

12 Jan 1998

5340-14-267-4075
Handle Grip

142674075
262-12-28194-01: RNCC: 3 | RNVC: 2
262-12-28194-01: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-439-6377
Loop Clamp

144396377
513153050281: RNCC: 3 | RNVC: 2
31S28: RNCC: 5 | RNVC: 2
ASNA0021-31S28: RNCC: 5 | RNVC: 2
A0021-31S28: RNCC: 5 | RNVC: 2

16 May 1990

5340-14-394-2298
Mounting Plate

143942298
AS509-15A: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-408-0418
Loop Clamp

144080418
NO PRIMARY REF14-408-0418: RNCC: 3 | RNVC: 2
P12-8988: RNCC: 5 | RNVC: 9

19 Mar 1986

5340-14-359-2750
Rod End Clevis

143592750
MG25247: RNCC: 3 | RNVC: 2
85-800-5678: RNCC: 6 | RNVC: 9

2 Oct 1979

5340-14-440-3064
Blank Panel

144403064
3511-190-47141: RNCC: 3 | RNVC: 2
89288160: RNCC: 5 | RNVC: 2

11 Jul 1990

5340-14-450-5444
Bumper

144505444
511270: RNCC: 3 | RNVC: 2
91629971: RNCC: 5 | RNVC: 2
295-1477: RNCC: 5 | RNVC: 2

9 Oct 1991

5340-14-551-7669
Mounting Plate

145517669
110E021-04: RNCC: 3 | RNVC: 2

20 Oct 2006

5340-14-463-2072
Mounting Bracket

144632072
2156-01-045: RNCC: 3 | RNVC: 2
89296255: RNCC: 5 | RNVC: 2

26 May 1993

5340-14-478-3551
Runner

144783551
ZF02-600001: RNCC: 1 | RNVC: 2
F5309-ZF02-600001: RNCC: 3 | RNVC: 2

25 Oct 1995

5340-14-513-4655
Bumper

145134655
332A22-0110-AT: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-14-372-7312
Rod End Clevis

143727312
1050340008: RNCC: 3 | RNVC: 2
1050340008: RNCC: 5 | RNVC: 2

21 Sep 1981

5340-14-522-3222
Mounting Bracket

145223222
10478319: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-14-514-5331
Buckle

145145331
8195192: RNCC: 3 | RNVC: 2

26 May 1999

5340-14-544-9974
Bumper

145449974
708451: RNCC: 3 | RNVC: 2

14 Mar 2005

5340-14-549-0544
Mounting Plate

145490544
RA1B212122731A1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-401-3555
Access Cover

144013555
20328572: RNCC: 3 | RNVC: 2
20328572: RNCC: 5 | RNVC: 9

5 Jun 1985

5340-14-379-0193
Anchor Strap

143790193
2206-911A522: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-536-1079
Mounting Bracket

145361079
803237130716: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-392-6699
Anchor Strap

143926699
210999: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-516-3985
Mounting Plate

145163985
CHH00010: RNCC: 3 | RNVC: 9

22 Sep 1999

5340-14-405-2562
Rod End Clevis

144052562
3511 190 97691: RNCC: 3 | RNVC: 2
RAR3446: RNCC: 5 | RNVC: 2

27 Nov 1985

5340-14-546-5804
Mounting Bracket

145465804
MP1868F01: RNCC: 3 | RNVC: 2

20 Jul 2005

5340-14-521-2972
Mounting Bracket

145212972
10501382: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-554-2408
Access Cover

145542408
358 245: RNCC: 3 | RNVC: 2
358 245: RNCC: 3 | RNVC: 2

14 Jun 2007

5340-14-261-2682
Rod End Clevis

142612682
175-57-59: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-442-6320
Access Cover

144426320
TB3050513: RNCC: 3 | RNVC: 2
71182: RNCC: 5 | RNVC: 9

23 Oct 1990

5340-14-503-0435
Access Cover

145030435
749595: RNCC: 3 | RNVC: 2

23 Dec 1997

5340-14-507-6823
Retaining Strap

145076823
265067: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-413-9050
Retaining Strap

144139050
189226: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-321-0092
Access Cover

143210092
15437716: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-531-5955
Bridge Clamp

145315955
3542225258: RNCC: 3 | RNVC: 2
3831C004: RNCC: 3 | RNVC: 2

3 Sep 2002

5340-14-515-7262
Angle Bracket

145157262
RA1M216900510A1: RNCC: 3 | RNVC: 2

28 Jul 1999

5340-14-436-6309
Rod End Clevis

144366309
DA2C202448511U1: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-515-3069
Mounting Plate

145153069
0009640823: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-518-1042
Access Cover

145181042
5000296707: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-540-3704
Handwheel

145403704
NNP5340940016998: RNCC: 3 | RNVC: 2

18 Mar 2004

5340-14-342-4621
Detent Plunger

143424621
ST406M63AA11: RNCC: 3 | RNVC: 2

16 May 1977

5340-14-341-8727
Rod End Connector

143418727
M3R221-93-821: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-287-2595
Rod End Connector

142872595
341A27-1441-00: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-318-8922
Support Hook

143188922
121A52-444-20-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-389-2163
Rod End Connector

143892163
BSC8PA103-6: RNCC: 3 | RNVC: 2
85-692-3831: RNCC: 6 | RNVC: 9

29 Nov 1983

5340-14-392-6916
Bridge Clamp

143926916
4-65-13-20-3-09: RNCC: 3 | RNVC: 2
4651320309: RNCC: 5 | RNVC: 2

7 Apr 1984

5340-14-352-1008
Control Rod

143521008
Z1-72-66: RNCC: 3 | RNVC: 9
Z1726-6: RNCC: 5 | RNVC: 9

16 Oct 1978

5340-14-364-3959
Angle Bracket

143643959
412003911: RNCC: 3 | RNVC: 2
K412-0391-1: RNCC: 5 | RNVC: 2
412-00391-1: RNCC: 5 | RNVC: 2

7 Aug 1980

5340-14-302-8950
Access Cover

143028950
773-410-076FF25: RNCC: 3 | RNVC: 2
773-410-076FF25: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-342-2134
Butt Hinge

143422134
301C0-0109REP1A3-5: RNCC: 3 | RNVC: 2
301C0-109REP1A3-5: RNCC: 5 | RNVC: 2

14 Apr 1977

5340-14-512-3930
Mounting Bracket

145123930
2164-02-00-01: RNCC: 3 | RNVC: 2

12 Feb 1999

5340-14-403-9157
Mounting Plate

144039157
P4H017869-00: RNCC: 3 | RNVC: 9

11 Sep 1985

5340-14-407-5130
Bumper

144075130
NO PRIMARY REF14-407-5130: RNCC: 3 | RNVC: 2
D10-44751: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-14-470-0628
Bridge Clamp

144700628
LN214001WR187TYPE"E": RNCC: 3 | RNVC: 2
RAB3288: RNCC: 5 | RNVC: 2

27 May 1994

5340-14-411-2576
Loop Clamp

144112576
ASNA0021-25SE16: RNCC: 3 | RNVC: 2
A0021-25SE16: RNCC: 5 | RNVC: 2

6 Aug 1986

5340-14-553-4490
Cover Strip

145534490
CCN301-173-016A1: RNCC: 3 | RNVC: 2

4 Apr 2007

Load More Results