What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 64 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 64 of 446

5340-14-321-6030
Control Rod

143216030
2-50-102: RNCC: 3 | RNVC: 9
2-50-102B: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-480-2574
Rod End Connector

144802574
8260-103: RNCC: 3 | RNVC: 2
002420490A: RNCC: 3 | RNVC: 2

28 Feb 1996

5340-14-373-7308
Loop Clamp

143737308
160-622001-21: RNCC: 3 | RNVC: 2

13 Nov 1981

5340-14-384-3184
Loop Clamp

143843184
92831181: RNCC: 3 | RNVC: 2
9-28GE18: RNCC: 5 | RNVC: 2

4 May 1983

5340-14-401-9858
Swivel Caster

144019858
NO PRIMARY REF14-401-9858: RNCC: 3 | RNVC: 2
M4ZS660D1715: RNCC: 5 | RNVC: 2
149-50-16PAB: RNCC: 5 | RNVC: 9
149-50/16PAB: RNCC: 5 | RNVC: 9
N149-50/16P-AB: RNCC: 5 | RNVC: 9

26 Jun 1985

5340-14-393-9363
Access Cover

143939363
A46447-39: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-521-2416
Synchro Clamp

145212416
8630-25A: RNCC: 3 | RNVC: 2

12 Jul 2000

5340-14-511-6229
Pipe Hanger

145116229
78731-038-100: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-501-9393
Mounting Bracket

145019393
332A23-0571-03: RNCC: 3 | RNVC: 2

19 Nov 1997

5340-14-435-9585
Mounting Bracket

144359585
332A21-1961-00: RNCC: 3 | RNVC: 2

29 Nov 1989

5340-14-490-3070
Clamp Bolt Assembly

144903070
J05085-01-0220P008: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-542-0275
Access Cover

145420275
20054-744: RNCC: 3 | RNVC: 2
502106005013A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-386-9991
Loop Clamp

143869991
NO PRIMARY REF14-386-9991: RNCC: 3 | RNVC: 2
C3-18: RNCC: 5 | RNVC: 9

24 Aug 1983

5340-14-307-0666
Strap End Clip

143070666
NO PRIMARY REF14-307-0666: RNCC: 3 | RNVC: 2
JEA20-118: RNCC: 5 | RNVC: 2
GF4006: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-374-1641
Angle Bracket

143741641
NO PRIMARY REF14-374-1641: RNCC: 3 | RNVC: 2
C1573-11: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-14-554-1691
Mounting Bracket

145541691
CLB501-001-650: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-472-4819
Mounting Plate

144724819
132E460-00: RNCC: 3 | RNVC: 2
132E460-00: RNCC: 5 | RNVC: 9

26 Oct 1994

5340-14-510-8708
Block Clamp

145108708
E4P702-25-885: RNCC: 3 | RNVC: 2
85-693-3964: RNCC: 6 | RNVC: 9

18 Nov 1998

5340-14-370-7402
Lock-Release Lever

143707402
676-43614-00: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-441-2097
Mounting Bracket

144412097
332A93-3206-22: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-504-9344
Lock Bolt

145049344
CORPS91138X00: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-563-4209
Utility Resilient Mount

145634209
UP160SB6: RNCC: 3 | RNVC: 2

8 Feb 2010

5340-14-551-3469
Angle Bracket

145513469
RA1M701856121N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-468-0043
Rim Lock

144680043
5315/6866COTE CADRE DROITE: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-14-446-7788
Detent Plunger

144467788
16009908: RNCC: 3 | RNVC: 2

15 Apr 1991

5340-14-231-1234
Retaining Strap

142311234
0202110460: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-408-9070
Angle Bracket

144089070
253464: RNCC: 3 | RNVC: 2
253464: RNCC: 5 | RNVC: 9

2 Apr 1986

5340-14-456-7855
Mounting Bracket

144567855
D51050: RNCC: 3 | RNVC: 2
D51050: RNCC: 5 | RNVC: 2

24 Jul 1992

5340-14-425-3146
Angle Bracket

144253146
0185100610: RNCC: 3 | RNVC: 2
89414633: RNCC: 5 | RNVC: 2

30 Jun 1988

5340-14-546-7540
Mounting Bracket

145467540
0098641: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-14-454-1042
Bow Handle

144541042
16661133: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-396-1016
Anchor Strap

143961016
6502822L: RNCC: 3 | RNVC: 2
0021803Z: RNCC: 5 | RNVC: 2

27 Nov 1984

5340-14-502-7413
Mounting Bracket

145027413
4P2671: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-437-0158
Access Cover

144370158
168225-BRONZE: RNCC: 3 | RNVC: 2

10 Jan 1990

5340-14-437-6055
Butt Hinge

144376055
PM1A121112110U1: RNCC: 3 | RNVC: 2
PM1A121112110U1: RNCC: 5 | RNVC: 2

7 Feb 1990

5340-14-449-2201
Bumper

144492201
5000674243: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-481-3594
Mounting Bracket

144813594
263402G: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-459-3630
Webbing Strap

144593630
318782: RNCC: 3 | RNVC: 2
318782: RNCC: 5 | RNVC: 9

26 Nov 1992

5340-14-343-6808
Retaining Strap

143436808
ST406M52P589: RNCC: 3 | RNVC: 2

13 Jul 1977

5340-14-350-4263
Angle Bracket

143504263
214501: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-355-8105
Loop Clamp

143558105
853860: RNCC: 3 | RNVC: 2
853860: RNCC: 5 | RNVC: 2
853860: RNCC: 5 | RNVC: 9

19 Mar 1979

5340-14-536-4167
Mounting Bracket

145364167
T711A1001183: RNCC: 3 | RNVC: 2

5 Aug 2003

5340-14-303-4030
Access Cover

143034030
NO PRIMARY REF14-303-4030: RNCC: 3 | RNVC: 2
0134C250: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-519-5121
Mounting Bracket

145195121
456-10979-000: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-549-8594
Mounting Bracket

145498594
2092407-001: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-543-0266
Synchro Clamp

145430266
708110S112-24A: RNCC: 3 | RNVC: 2

18 Aug 2004

5340-14-533-8613
Cover Strip

145338613
12-250-229: RNCC: 3 | RNVC: 2
SZ12.250.229: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-541-4825
Mounting Bracket

145414825
88179-2132: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-471-8912
Angle Bracket

144718912
330A22-2028-22: RNCC: 3 | RNVC: 2

21 Sep 1994

5340-14-545-4472
Pipe Hanger

145454472
RA1B701976441N1: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-549-7686
Rim Latch

145497686
S521A1051802: RNCC: 3 | RNVC: 2

10 May 2006

5340-14-509-1389
Mounting Bracket

145091389
3823P004: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-527-4367
Lock Bolt

145274367
V107246: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-380-1182
Retaining Strap

143801182
BBZ1094: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-461-9562
Butt Hinge

144619562
T700A5285006002: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-367-6166
Retaining Strap

143676166
132598D: RNCC: 3 | RNVC: 2
MAF0001004185: RNCC: 6 | RNVC: 9

19 Jan 1981

5340-14-447-8235
Mounting Bracket

144478235
06-0T5: RNCC: 3 | RNVC: 2

6 Jun 1991

5340-14-481-2191
Angle Bracket

144812191
34 55 97: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-14-403-3248
Retaining Strap

144033248
219762: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-332-9393
Retaining Strap

143329393
193514: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-308-1513
Loop Clamp

143081513
C48380: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-478-3552
Runner

144783552
ZF02-600002: RNCC: 1 | RNVC: 2
F5309-ZF02-600002: RNCC: 3 | RNVC: 2

25 Oct 1995

5340-14-526-0748
Arched Cushion

145260748
E1M3715-20: RNCC: 3 | RNVC: 2
MAT169-0024F16BLEUE: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-14-539-5938
Lock Key

145395938
23-100-01-CLE: RNCC: 3 | RNVC: 2
SYQ4688: RNCC: 5 | RNVC: 2

22 Jan 2004

5340-14-217-9152
Cover Strip

142179152
3160S25-25-418: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-383-9046
Mending Plate

143839046
3511 180 90471: RNCC: 3 | RNVC: 2
3511 180 90471: RNCC: 5 | RNVC: 2
3511-180-90471: RNCC: 5 | RNVC: 2

11 Apr 1983

5340-14-405-2147
Clamping Catch

144052147
8461-13: RNCC: 3 | RNVC: 9
9223379080: RNCC: 5 | RNVC: 9

27 Nov 1985

5340-14-350-4517
Lock-Release Lever

143504517
206805: RNCC: 3 | RNVC: 2
20-0546: RNCC: 5 | RNVC: 2

12 Jul 1978

5340-14-041-0864
Corner Brace

140410864
A00186-05-0000P006: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-440-1717
Mounting Bracket

144401717
160-61300-19: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-304-3437
Angle Bracket

143043437
330A21-2717-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-485-3617
Split Tubular Clip

144853617
NO PRIMARY REF14-485-3617: RNCC: 3 | RNVC: 2
RAB9710: RNCC: 5 | RNVC: 2
10002: RNCC: 5 | RNVC: 9

20 Jan 1997

5340-14-568-4306
Utility Resilient Mount

145684306
3G-5003-01: RNCC: 3 | RNVC: 2
191706501: RNCC: 5 | RNVC: 2
191706519: RNCC: 5 | RNVC: 2

31 May 2011

5340-14-435-1988
Retaining Strap

144351988
NSA8601-28: RNCC: 3 | RNVC: 2

25 Oct 1989

5340-14-542-8952
Angle Bracket

145428952
708010S100-40A: RNCC: 3 | RNVC: 2

14 Aug 2004

5340-14-470-2575
Mounting Bracket

144702575
355A76-6075-26: RNCC: 3 | RNVC: 2

8 Jun 1994

5340-14-206-4224
Retaining Strap

142064224
790015031: RNCC: 3 | RNVC: 2
ELE5-705-22: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-546-8150
Pipe Hanger

145468150
S215A3014216: RNCC: 3 | RNVC: 2

25 Aug 2005

5340-14-533-3093
Mounting Plate

145333093
02000120: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-547-5613
Angle Bracket

145475613
RA1M702201291N1: RNCC: 3 | RNVC: 2

16 Oct 2005

5340-14-528-3049
Angle Bracket

145283049
F1307688: RNCC: 3 | RNVC: 2

16 Jan 2002

5340-14-568-9910
Utility Resilient Mount

145689910
609371: RNCC: 3 | RNVC: 2

26 Jul 2011

5340-14-387-6670
Loop Clamp

143876670
0308967010: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-533-5418
Mounting Bracket

145335418
F1260102: RNCC: 3 | RNVC: 2

10 Feb 2003

5340-14-485-1025
Angle Bracket

144851025
009195080P: RNCC: 3 | RNVC: 2

8 Jan 1997

5340-14-507-3603
Mounting Bracket

145073603
H102610: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-14-500-3496
Flush Catch Claw

145003496
C61301000007: RNCC: 3 | RNVC: 2
F300 0T 024 3587: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-415-6229
Leaf Spring

144156229
NO PRIMARY REF14-415-6229: RNCC: 3 | RNVC: 2
16896-4: RNCC: 5 | RNVC: 9

18 May 1987

5340-14-381-4971
Flush Catch Claw

143814971
0018190J: RNCC: 3 | RNVC: 2
6502840P: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-436-7342
Loop Clamp

144367342
NR18-16-6: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-323-0605
Anchor Strap

143230605
121E83-363-20-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-526-8677
Mounting Bracket

145268677
21240278-00: RNCC: 3 | RNVC: 2
21240278-0: RNCC: 5 | RNVC: 2

12 Sep 2001

5340-14-441-6738
Strap Fastener Loop

144416738
BN339-506B01-0-016: RNCC: 2 | RNVC: 2
RAR3476: RNCC: 5 | RNVC: 2

10 Sep 1990

5340-14-403-3691
Anchor Strap

144033691
9141-13: RNCC: 3 | RNVC: 2
9253044480: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-441-9402
Angle Bracket

144419402
8065-43-4: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-448-5768
Cushioning Pad

144485768
1700-7: RNCC: 3 | RNVC: 2

2 Jul 1991

5340-14-453-2615
Rod End Clevis

144532615
640200: RNCC: 3 | RNVC: 2

12 Feb 1992

5340-14-399-9880
Access Cover

143999880
603994: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-466-1764
Cover Strip

144661764
162538: RNCC: 3 | RNVC: 2
89169923: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-457-9178
Access Cover

144579178
2689913M11P11: RNCC: 3 | RNVC: 2

1 Oct 1992

5340-14-353-6819
Retaining Strap

143536819
650-403-264-0: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-290-0682
Rod End Clevis

142900682
K1824REP5: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-534-6394
Rod End Clevis

145346394
NNM0021040402257: RNCC: 2 | RNVC: 2

28 Mar 2003

5340-14-433-4783
Access Cover

144334783
071381C: RNCC: 3 | RNVC: 2

1 Aug 1989

5340-14-508-0371
Butt Hinge

145080371
4773221560: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-369-7891
Rod End Clevis

143697891
A11A722211007: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-392-8896
Access Cover

143928896
573897239: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-543-9150
Loop Clamp

145439150
ASNA0021-35G10: RNCC: 1 | RNVC: 2
ASNA0021-35G10: RNCC: 3 | RNVC: 2
ASNA0021-35G10: RNCC: 5 | RNVC: 2

15 Dec 2004

5340-14-519-3057
Mounting Bracket

145193057
332AMR-2788-00: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-476-8421
Mounting Bracket

144768421
748-323: RNCC: 3 | RNVC: 2

5 Jul 1995

5340-14-505-6825
Mounting Bracket

145056825
E21001008000: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-388-8063
Buckle

143888063
A2036-18: RNCC: 3 | RNVC: 9

29 Nov 1983

5340-14-031-2429
Rod End Clevis

140312429
BJM00405: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-530-9442
Access Cover

145309442
46138271: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-14-457-1975
Mounting Bracket

144571975
5000743463: RNCC: 3 | RNVC: 2
89287779: RNCC: 5 | RNVC: 2

13 Aug 1992

5340-14-505-3596
Access Cover

145053596
V88510208: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-284-5724
Access Cover

142845724
0226550180: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-271-0143
Loop Clamp

142710143
3160S73-39-540: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-500-6961
Mounting Bracket

145006961
61669: RNCC: 3 | RNVC: 2
F300 0T 024 7152: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-474-3267
Mounting Bracket

144743267
515244: RNCC: 3 | RNVC: 2
SOG515244: RNCC: 5 | RNVC: 9

8 Feb 1995

5340-14-207-1078
Handle Grip

142071078
CP1360: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-504-1053
Mounting Plate

145041053
MB1248F00: RNCC: 3 | RNVC: 2

6 Feb 1998

5340-14-263-4167
Retaining Strap

142634167
R403790: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-542-2997
Mounting Bracket

145422997
970644308: RNCC: 3 | RNVC: 2
970644308: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-566-1309
Utility Resilient Mount

145661309
530652-60: RNCC: 3 | RNVC: 2
A210609900017: RNCC: 5 | RNVC: 2

20 Oct 2010

5340-14-042-3847
Runner

140423847
980393: RNCC: 3 | RNVC: 2

10 Aug 1977

5340-14-390-3310
Bow Handle

143903310
59163103: RNCC: 3 | RNVC: 9

26 Jan 1984

5340-14-403-9998
Butt Hinge

144039998
39225290: RNCC: 3 | RNVC: 2
39225290: RNCC: 5 | RNVC: 9

11 Sep 1985

5340-14-396-2256
Mounting Plate

143962256
216899: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-490-6335
Mounting Bracket

144906335
T206068502: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-504-2458
Mounting Bracket

145042458
3596420M93: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-504-3664
Mounting Bracket

145043664
20114-243: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-506-7869
Mounting Bracket

145067869
009426001P: RNCC: 3 | RNVC: 2

18 May 1998

5340-14-413-6085
Control Rod

144136085
74146158: RNCC: 3 | RNVC: 9

22 Dec 1986

5340-14-456-8058
Loop Clamp

144568058
68920005: RNCC: 3 | RNVC: 2
742105: RNCC: 5 | RNVC: 2
AN742D5: RNCC: 5 | RNVC: 9
YAN742D05: RNCC: 5 | RNVC: 9

24 Jul 1992

5340-14-565-7162
Utility Resilient Mount

145657162
MDS81C305: RNCC: 3 | RNVC: 2

16 Sep 2010

5340-14-436-2032
Mounting Plate

144362032
DA2C228552A1: RNCC: 3 | RNVC: 2

6 Dec 1989

5340-14-274-7413
Compression Cup

142747413
1021: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-520-1310
Loop Clamp

145201310
5010376442: RNCC: 3 | RNVC: 2

15 May 2000

5340-14-390-6781
Detent Plunger

143906781
26153011300: RNCC: 3 | RNVC: 2
261530113: RNCC: 5 | RNVC: 2

26 Jan 1984

5340-14-378-9971
Angle Bracket

143789971
16910471: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-519-3132
Mounting Bracket

145193132
365P61-6118-20: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-236-5606
Rod End Clevis

142365606
321A27-9790-23: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-344-6146
Bow Handle

143446146
NO PRIMARY REF14-344-6146: RNCC: 3 | RNVC: 2
RI16U: RNCC: 5 | RNVC: 9

9 Sep 1977

5340-14-340-3385
Pipe Hanger

143403385
M3C705-062: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-384-0920
Angle Bracket

143840920
NO PRIMARY REF14-384-0920: RNCC: 3 | RNVC: 2
710556: RNCC: 5 | RNVC: 9

4 May 1983

5340-14-526-0735
Arched Cushion

145260735
E1M-3705-20: RNCC: 3 | RNVC: 2
MAT169-0024F5BLEUE: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-14-365-2635
Pipe Hanger

143652635
366A75-3072-20: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-309-1721
Bumper

143091721
NO PRIMARY REF14-309-1721: RNCC: 3 | RNVC: 2
S0267607: RNCC: 5 | RNVC: 2
S267607: RNCC: 5 | RNVC: 9
85-665-3321: RNCC: 6 | RNVC: 9

1 Jan 1974

5340-14-297-1077
Loop Clamp

142971077
906-002: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-406-4472
Cover Strip

144064472
FA2B210-219: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-379-4071
Anchor Strap

143794071
1105982500: RNCC: 3 | RNVC: 2
59825: RNCC: 5 | RNVC: 9

1 Oct 1982

5340-14-439-5160
Webbing Strap

144395160
006572080P: RNCC: 3 | RNVC: 2

11 May 1990

5340-14-484-6642
Access Cover

144846642
29405381: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-254-7778
Retaining Strap

142547778
52237: RNCC: 3 | RNVC: 9

1 Jan 1969

5340-14-394-8041
Handwheel

143948041
M4ZS450D1752A: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-467-4081
Access Cover

144674081
1039245C00: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-14-503-8916
Metal Grille

145038916
F0023470: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-14-343-6807
Retaining Strap

143436807
ST406M52P569: RNCC: 3 | RNVC: 2

13 Jul 1977

5340-14-470-0727
Cable Retractor

144700727
1032451: RNCC: 3 | RNVC: 9
RAB3307: RNCC: 5 | RNVC: 2

31 May 1994

5340-14-438-7075
Mending Plate

144387075
TB1030728: RNCC: 3 | RNVC: 2

30 Mar 1990

5340-14-510-7741
Angle Bracket

145107741
259683: RNCC: 3 | RNVC: 2

12 Nov 1998

5340-14-277-0962
Retaining Strap

142770962
202733: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-381-5076
Retaining Strap

143815076
233431: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-525-6451
Mounting Plate

145256451
20 242 020 3630: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-509-1367
Mounting Plate

145091367
3241H009: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-440-9592
Clamping Catch

144409592
F135445: RNCC: 3 | RNVC: 2

8 Aug 1990

5340-14-551-3560
Angle Bracket

145513560
RA1A704926013: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-467-3712
Support Hook

144673712
0236947X00: RNCC: 3 | RNVC: 2
51L7-5BF: RNCC: 5 | RNVC: 2

10 Jan 1994

5340-14-502-8051
Retaining Clip

145028051
8T1899: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-446-2672
Bumper

144462672
5000750524: RNCC: 3 | RNVC: 2
5000750486: RNCC: 5 | RNVC: 2

11 Mar 1991

5340-14-472-3834
Arched Cushion

144723834
PM1A729009151: RNCC: 3 | RNVC: 2
PM1A729009151: RNCC: 5 | RNVC: 2

19 Oct 1994

5340-14-409-0768
Angle Bracket

144090768
4771621810: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-461-8977
Block Fairlead

144618977
T700A2740102101: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-362-8290
Detent Plunger

143628290
B0323-011F21: RNCC: 3 | RNVC: 2

19 Mar 1980

5340-14-413-7654
Loop Clamp

144137654
A0021-31F32: RNCC: 3 | RNVC: 2

15 Jan 1987

5340-14-451-5189
Bow Handle

144515189
534395: RNCC: 3 | RNVC: 2

21 Nov 1991

5340-14-342-0854
Bumper

143420854
EA1M286-27: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-520-4463
Bridge Clamp

145204463
M45AA0101-802: RNCC: 3 | RNVC: 2
M45AA0101-802: RNCC: 5 | RNVC: 9

17 May 2000

5340-14-369-8406
Retaining Strap

143698406
16298500: RNCC: 1 | RNVC: 2
044K00-000000-0600: RNCC: 3 | RNVC: 2
0905552Q00: RNCC: 5 | RNVC: 2
16298500: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-363-8980
Mounting Plate

143638980
M532-52014: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-524-2023
Access Cover

145242023
ST159-2M781-24P02: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-514-4794
Mounting Plate

145144794
45218975: RNCC: 3 | RNVC: 2
45218975: RNCC: 5 | RNVC: 2
IF-192-0276: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-428-0558
Runner

144280558
B0204-037F4: RNCC: 3 | RNVC: 2

24 Nov 1988

5340-14-280-0306
Access Cover

142800306
78876-43: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-437-4527
Mounting Bracket

144374527
332A61-2339-08: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-472-3115
Mounting Bracket

144723115
A3-63318: RNCC: 3 | RNVC: 2

19 Oct 1994

5340-14-537-2394
Lock Bolt

145372394
P1-915486: RNCC: 3 | RNVC: 2

15 Oct 2003

5340-14-394-2288
Mounting Plate

143942288
AS525-13A: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-317-7939
Loop Clamp

143177939
NO PRIMARY REF14-317-7939: RNCC: 3 | RNVC: 2
800392-79: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-401-7350
Rim Lock Set

144017350
550-01: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-472-8721
Cover Strip

144728721
332A23-0618-20: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-530-0590
Webbing Strap

145300590
2-521051-1: RNCC: 3 | RNVC: 2

3 May 2002

5340-14-523-9779
Threaded Rod End

145239779
0429-9530: RNCC: 3 | RNVC: 2
SAF0429-9530: RNCC: 5 | RNVC: 9

14 Feb 2001

5340-14-276-0825
Loop Clamp

142760825
2-08363: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-534-0913
Synchro Clamp

145340913
330A85-0173-34: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-308-7249
Mending Plate

143087249
A10-67-700-35-0: RNCC: 3 | RNVC: 2
A10-67-700-35-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-452-9943
Access Cover

144529943
27108592-0: RNCC: 3 | RNVC: 2

29 Jan 1992

5340-14-464-0946
Angle Bracket

144640946
366A61-2108-01: RNCC: 3 | RNVC: 2

15 Jul 1993

5340-14-485-0727
Mounting Bracket

144850727
332A54-1113-00: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-14-456-5316
Compression Cup

144565316
91ABC12-06: RNCC: 3 | RNVC: 2
RAR3503: RNCC: 5 | RNVC: 2

8 Jul 1992

5340-14-356-6691
Retaining Strap

143566691
EA1M792-24-01: RNCC: 3 | RNVC: 2

15 May 1979

5340-14-408-3541
Loop Clamp

144083541
LS08-015-07: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-519-9394
Handwheel

145199394
537957: RNCC: 3 | RNVC: 2
A537957: RNCC: 5 | RNVC: 2
A537957-003: RNCC: 5 | RNVC: 2

25 Apr 2000

5340-14-382-6670
Butt Hinge

143826670
365A58-1090-20: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-489-4895
Access Cover

144894895
365A21-3286-20: RNCC: 3 | RNVC: 2

23 Jul 1997

5340-14-384-9282
Loop Clamp

143849282
9970-123-062: RNCC: 3 | RNVC: 2

2 Jun 1983

5340-14-470-0480
Bumper

144700480
A02645-01-0000P010: RNCC: 3 | RNVC: 2

25 May 1994

5340-14-220-5030
Loop Clamp

142205030
501-770-082-0: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-302-8873
Access Cover

143028873
NO PRIMARY REF14-302-8873: RNCC: 3 | RNVC: 2
23846DETC: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-513-8058
Mounting Bracket

145138058
DE21798: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-508-0788
Webbing Strap

145080788
4773921520: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-525-2680
Mounting Plate

145252680
10331632: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-489-6090
Mounting Bracket

144896090
0301037890: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-500-9903
Butt Hinge

145009903
F00168638: RNCC: 3 | RNVC: 2
F00168638: RNCC: 5 | RNVC: 9
F300 0T 025 0116: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-524-3498
Mounting Bracket

145243498
SD001PD010145: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-473-9316
Access Cover

144739316
38018361: RNCC: 3 | RNVC: 2
38018361: RNCC: 5 | RNVC: 9

18 Jan 1995

5340-14-508-2677
Blank Panel

145082677
0R/C25064754: RNCC: 3 | RNVC: 2

2 Sep 1998

5340-14-479-3983
Stand Base

144793983
RA1M122115350N1: RNCC: 3 | RNVC: 2

10 Jan 1996

5340-14-534-6961
Mounting Plate

145346961
0319250460: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-549-0506
Angle Bracket

145490506
RA1B703145121A1N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-554-8832
Loop Clamp

145548832
78651RH28CG: RNCC: 1 | RNVC: 2
78651RH28CG: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-500-8192
Mounting Plate

145008192
E64009998120: RNCC: 3 | RNVC: 2
F300 0T 024 8394: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-319-7047
Synchro Clamp

143197047
0202007770: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-537-4592
Access Cover

145374592
10625682: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-481-9966
Mounting Bracket

144819966
92 96 69: RNCC: 3 | RNVC: 2

13 Jun 1996

5340-14-521-4089
Angle Bracket

145214089
10501394: RNCC: 3 | RNVC: 2

26 Jul 2000

5340-14-570-9750
Utility Resilient Mount

145709750
E1N-3456-51: RNCC: 3 | RNVC: 2

9 Feb 2012

5340-14-465-4834
Retaining Bail

144654834
365A21-5075-22: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-511-3588
Section Block Clamp

145113588
F702-11-02: RNCC: 3 | RNVC: 2

16 Dec 1998

5340-14-401-3313
Butt Hinge

144013313
NO PRIMARY REF14-401-3313: RNCC: 3 | RNVC: 2
16464676: RNCC: 5 | RNVC: 9

5 Jun 1985

5340-14-545-6100
Loop Clamp

145456100
10396-00: RNCC: 3 | RNVC: 2

25 Apr 2005

5340-14-532-5006
Cover Strip

145325006
SZ42.250.253: RNCC: 3 | RNVC: 2
42-250-253: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-14-378-4236
Threaded Rod End

143784236
360A94-4100-11: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-392-8039
Bumper

143928039
7945-02: RNCC: 3 | RNVC: 2
7903088050: RNCC: 5 | RNVC: 2

7 Apr 1984

5340-14-573-2140
Utility Resilient Mount

145732140
HH11-40TIM: RNCC: 3 | RNVC: 2

24 Sep 2012

5340-14-349-5065
Bow Handle

143495065
ET0009-77: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-202-5332
Loop Clamp

142025332
ASNA0021-15N22: RNCC: 1 | RNVC: 2
51100005022: RNCC: 3 | RNVC: 2
A0021-15N22: RNCC: 5 | RNVC: 2
A0021-15N22: RNCC: 5 | RNVC: 2
15N22: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-14-226-4423
Corner Brace

142264423
NO PRIMARY REF14-226-4423: RNCC: 3 | RNVC: 2
M11035-19: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-302-5658
Detent Plunger

143025658
330A22-2251-20: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-361-7186
Mounting Plate

143617186
NO PRIMARY REF14-361-7186: RNCC: 3 | RNVC: 2
F2031409: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-14-386-0658
Buckle

143860658
9433-14: RNCC: 3 | RNVC: 2
AS57: RNCC: 5 | RNVC: 2

24 Aug 1983

5340-14-370-0971
Vent Plug

143700971
423-10268-008: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-307-0195
Mounting Plate

143070195
00259-67: RNCC: 3 | RNVC: 2
A00259-67: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-532-4485
Angle Bracket

145324485
341A54-1531-21: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-382-4417
Access Cover

143824417
4770202190: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-438-8245
Webbing Strap

144388245
TB2010906: RNCC: 3 | RNVC: 2

9 Apr 1990

5340-14-378-9529
Access Cover

143789529
C92843: RNCC: 3 | RNVC: 2
C92843: RNCC: 5 | RNVC: 2
058880: RNCC: 5 | RNVC: 2
C92843: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-14-305-7954
Access Cover

143057954
379C66513H1DET2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-489-4294
Key Holder

144894294
46063219: RNCC: 3 | RNVC: 2
46063219: RNCC: 5 | RNVC: 9

22 Jul 1997

5340-14-398-8806
Access Cover

143988806
005795543P: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-451-9782
Anchor Strap

144519782
007552080P: RNCC: 3 | RNVC: 2

17 Dec 1991

5340-14-421-4061
Access Cover

144214061
330A69-9044-999: RNCC: 3 | RNVC: 2

14 Jan 1988

5340-14-471-9652
Loop Clamp

144719652
69015013: RNCC: 3 | RNVC: 2
69015013: RNCC: 5 | RNVC: 9

28 Sep 1994

5340-14-031-9164
Access Cover

140319164
164569: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-379-4045
Anchor Strap

143794045
1106848600: RNCC: 3 | RNVC: 2
68486: RNCC: 5 | RNVC: 2

1 Oct 1982

5340-14-530-9417
Access Cover

145309417
45679579: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-14-300-6118
Retaining Strap

143006118
53568-2: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-392-9467
Mounting Plate

143929467
0000189909: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-426-5592
Doorstop

144265592
39232909: RNCC: 3 | RNVC: 2
39232909: RNCC: 5 | RNVC: 9

8 Sep 1988

5340-14-386-5324
Anchor Strap

143865324
3176-46: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-452-7362
Access Cover

144527362
234056J: RNCC: 3 | RNVC: 2

15 Jan 1992

5340-14-505-4726
Rod End Clevis

145054726
160700214: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-452-9983
Access Cover

144529983
162142200: RNCC: 3 | RNVC: 2
1621422000000: RNCC: 5 | RNVC: 2
162142200: RNCC: 5 | RNVC: 9

29 Jan 1992

5340-14-376-4968
Access Cover

143764968
01-016: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-258-1682
Retaining Band

142581682
F118812: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-365-8163
Access Cover

143658163
120069-353: RNCC: 3 | RNVC: 9
91390698: RNCC: 5 | RNVC: 2

8 Oct 1980

5340-14-418-9246
Rod End Clevis

144189246
DA2C111317844U1: RNCC: 3 | RNVC: 2

16 Sep 1987

5340-14-495-5139
Mounting Plate

144955139
59495465: RNCC: 3 | RNVC: 2
F300 0T 019 4083: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-450-8908
Pipe Hanger

144508908
PM1A726142070: RNCC: 3 | RNVC: 2
PM1A726142070: RNCC: 5 | RNVC: 2

23 Oct 1991

5340-14-460-9903
Angle Bracket

144609903
5000603030: RNCC: 3 | RNVC: 2

17 Feb 1993

5340-14-502-8006
Mounting Bracket

145028006
8C8841: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-473-6677
Angle Bracket

144736677
332A64-2657-20: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-300-9805
Pipe Hanger

143009805
341A84-5029-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-387-9427
Corner Brace

143879427
365A23-4302-06: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-385-3175
Surface Bolt

143853175
365A25-3170-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-434-1322
Mounting Bracket

144341322
332A67-1950-6701: RNCC: 3 | RNVC: 2

6 Sep 1989

5340-14-322-6108
Bumper

143226108
3160S73-74-614: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-548-9513
Loop Clamp

145489513
82123672000: RNCC: 3 | RNVC: 2

24 Feb 2006

5340-14-215-4635
Expansion Plug

142154635
NO PRIMARY REF14-215-4635: RNCC: 3 | RNVC: 2
40128: RNCC: 5 | RNVC: 2
40128: RNCC: 5 | RNVC: 9
40128: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-410-3010
Angle Bracket

144103010
332A61-1401-20: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-14-429-5168
Mounting Plate

144295168
755-1056: RNCC: 3 | RNVC: 2

27 Jan 1989

5340-14-358-2575
Retaining Strap

143582575
3511-131-15961: RNCC: 3 | RNVC: 2
3511 131 15961: RNCC: 5 | RNVC: 2

13 Aug 1979

5340-14-448-0853
Cover Strip

144480853
PM1A239107005: RNCC: 3 | RNVC: 2
PM1A239107005: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-355-2784
Clamping Catch

143552784
LH1011: RNCC: 3 | RNVC: 2
L835-255: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-548-6234
Angle Bracket

145486234
RA1M701177111: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-463-7298
Mounting Plate

144637298
1400B-76-09: RNCC: 3 | RNVC: 2
714623: RNCC: 5 | RNVC: 2
89296190: RNCC: 5 | RNVC: 2

23 Jun 1993

5340-14-524-9825
Loop Clamp

145249825
53286-12: RNCC: 3 | RNVC: 2

10 May 2001

5340-14-290-4051
Loop Clamp

142904051
HE60-17-1-38: RNCC: 3 | RNVC: 2
532498: RNCC: 5 | RNVC: 2
HE60-17-1-38: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-548-9839
Mounting Bracket

145489839
21244348-00: RNCC: 3 | RNVC: 2
21244348-9: RNCC: 5 | RNVC: 2

28 Feb 2006

5340-14-508-0669
Mounting Plate

145080669
20669956: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-439-6949
Bridge Clamp

144396949
16930574: RNCC: 3 | RNVC: 2
16930574: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-526-3740
Lock Key

145263740
LCL455: RNCC: 3 | RNVC: 2
LCL 455: RNCC: 5 | RNVC: 2

25 Jul 2001

5340-14-525-1668
Lock Key

145251668
A00021: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-307-9092
Rim Lock

143079092
1084-92: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-428-6144
Anchor Strap

144286144
19549: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-552-9631
Access Cover

145529631
713186: RNCC: 3 | RNVC: 2

19 Feb 2007

5340-14-535-0617
Retaining Band

145350617
4CD72861001: RNCC: 3 | RNVC: 2
CAE01200: RNCC: 5 | RNVC: 2

30 Apr 2003

5340-14-536-0712
Mounting Bracket

145360712
803238130710: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-560-4453
Utility Resilient Mount

145604453
941255: RNCC: 3 | RNVC: 9
FS0002630: RNCC: 6 | RNVC: 9

20 Apr 2009

5340-14-209-8350
Access Cover

142098350
50594: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-550-3015
Access Cover

145503015
MB6550F00: RNCC: 3 | RNVC: 2

15 Jun 2006

5340-14-447-1534
Mounting Bracket

144471534
N110142: RNCC: 3 | RNVC: 2

3 May 1991

5340-14-457-9866
Mounting Bracket

144579866
537216: RNCC: 3 | RNVC: 2

2 Oct 1992

5340-14-425-2674
Anchor Strap

144252674
30331427J: RNCC: 3 | RNVC: 2

29 Jun 1988

5340-14-543-9426
Utility Access Door

145439426
013 42: RNCC: 3 | RNVC: 2
01342: RNCC: 5 | RNVC: 2

17 Dec 2004

5340-14-484-9016
Access Cover

144849016
189307-212: RNCC: 3 | RNVC: 9

12 Dec 1996

5340-14-500-3058
Utility Access Door

145003058
10492945: RNCC: 3 | RNVC: 2
F300 0T 024 3144: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-505-9612
Cover Strip

145059612
330A58-1300-62: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-14-230-7330
Handwheel

142307330
GSM137-001F17-6N1: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-349-3144
Loop Clamp

143493144
T20-13C295: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-393-1300
Retaining Strap

143931300
52062020200: RNCC: 3 | RNVC: 2
59313202: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-14-353-0510
Pipe Hanger

143530510
A11A522320730A1: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-545-6379
Mounting Bracket

145456379
5010575160: RNCC: 3 | RNVC: 2

26 Apr 2005

5340-14-518-1576
Angle Bracket

145181576
5010054555: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-438-1925
Cover Strip

144381925
PM1A121113104: RNCC: 3 | RNVC: 2
PM1A121113104: RNCC: 5 | RNVC: 2

7 Mar 1990

5340-14-541-7936
Retaining Strap

145417936
E64101100029: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-516-5175
Mounting Plate

145165175
6130.099: RNCC: 3 | RNVC: 2
6130.099: RNCC: 3 | RNVC: 2

29 Sep 1999

5340-14-326-9371
Retaining Strap

143269371
191706: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-551-0308
Mounting Bracket

145510308
7420801501: RNCC: 3 | RNVC: 2

22 Aug 2006

5340-14-536-3581
Mounting Bracket

145363581
0014976: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-14-549-0061
Loop Clamp

145490061
110000400: RNCC: 3 | RNVC: 2
9560154750: RNCC: 5 | RNVC: 2
11N4: RNCC: 5 | RNVC: 9

1 Mar 2006

5340-14-368-2381
Loop Clamp

143682381
P951DIAM28: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-14-434-1055
Mounting Plate

144341055
017228J: RNCC: 3 | RNVC: 2

6 Sep 1989

5340-14-553-1025
Retaining Strap

145531025
MR20860670029: RNCC: 3 | RNVC: 2

1 Mar 2007

5340-14-433-9153
Retaining Strap

144339153
412703050207: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-14-328-5931
Recess Handle

143285931
321A23-2109-00: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-410-7439
Bumper

144107439
A02358-02-3000P015: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-479-2793
Butt Hinge

144792793
706A31-390-000: RNCC: 1 | RNVC: 2
706A31-390-000: RNCC: 3 | RNVC: 2

3 Jan 1996

5340-14-340-3152
Loop Clamp

143403152
M3C704-134: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-359-6334
Rim Lock

143596334
NO PRIMARY REF14-359-6334: RNCC: 3 | RNVC: 2
3224425: RNCC: 5 | RNVC: 9
3224425: RNCC: 5 | RNVC: 9

15 Oct 1979

5340-14-514-5581
Clamping Catch

145145581
GR/EX: RNCC: 3 | RNVC: 2

28 May 1999

5340-14-337-4214
Mounting Plate

143374214
NO PRIMARY REF14-337-4214: RNCC: 3 | RNVC: 2
S267118: RNCC: 5 | RNVC: 9
85-650-5041: RNCC: 6 | RNVC: 9

7 Oct 1976

5340-14-225-8632
Cover Strip

142258632
3160S25-29-078: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-380-1865
Access Cover

143801865
4137-244D503: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-431-5004
Angle Bracket

144315004
160H752633-02: RNCC: 3 | RNVC: 2

19 Apr 1989

5340-14-522-1113
Angle Bracket Set

145221113
3195070: RNCC: 3 | RNVC: 2
3195070: RNCC: 5 | RNVC: 2

4 Oct 2000

5340-14-518-9692
Mounting Plate

145189692
704138: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-558-9931
Utility Access Door

145589931
82109035006: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-14-549-9688
Mounting Bracket

145499688
T327A1001108: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-446-1885
Retaining Strap

144461885
2510115000-44: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-385-9732
Retaining Strap

143859732
5000501184: RNCC: 3 | RNVC: 2
5000501184: RNCC: 5 | RNVC: 9

24 Aug 1983

5340-14-231-1188
Cover Strip

142311188
75843: RNCC: 3 | RNVC: 2
P075843: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-410-8046
Mounting Plate

144108046
A10752: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-462-7005
Buckle

144627005
168807: RNCC: 3 | RNVC: 2
89170364: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-523-6497
Mounting Plate

145236497
E4841458: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-539-7532
Cover Strip

145397532
SZ09.251.162: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-14-549-8747
Lock Bolt

145498747
2093234: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-542-2389
Loop Clamp

145422389
774221708: RNCC: 3 | RNVC: 2
774221708: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-518-1733
Protection Bellows

145181733
5010135453: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-483-5716
Mounting Bracket

144835716
F120086: RNCC: 3 | RNVC: 2

19 Sep 1996

5340-14-498-4023
Mounting Bracket

144984023
2206-341D528: RNCC: 3 | RNVC: 2
2206-341D528: RNCC: 5 | RNVC: 9

25 Oct 2000

5340-14-533-6633
Mounting Bracket

145336633
F1264368: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-14-512-2931
Mounting Bracket

145122931
3BM03528AAAA: RNCC: 3 | RNVC: 2
3BM03528AAAA: RNCC: 5 | RNVC: 2

10 Feb 1999

5340-14-485-1051
Elastic Strap

144851051
009213050P: RNCC: 3 | RNVC: 2

8 Jan 1997

5340-14-334-4474
Retaining Band

143344474
40897: RNCC: 3 | RNVC: 9

1 Jun 1976

5340-14-518-0198
Mounting Plate

145180198
5010117229: RNCC: 3 | RNVC: 2

21 Jan 2000

5340-14-456-4423
Runner

144564423
T441AA21: RNCC: 3 | RNVC: 2
5045841: RNCC: 5 | RNVC: 9
T441AA21: RNCC: 5 | RNVC: 9

2 Jul 1992

5340-14-522-5973
Mounting Bracket

145225973
28710254: RNCC: 3 | RNVC: 2

8 Nov 2000

5340-14-448-1842
Loop Clamp

144481842
RI SP620PPDPAS: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-546-5373
Webbing Strap

145465373
8026065M00: RNCC: 3 | RNVC: 2

18 Jul 2005

5340-14-513-5641
Retaining Bail

145135641
6166007: RNCC: 3 | RNVC: 2

24 Mar 1999

5340-14-463-6528
Retaining Strap

144636528
160R742116: RNCC: 3 | RNVC: 2

23 Jun 1993

5340-14-504-8016
Loop Clamp

145048016
156656: RNCC: 3 | RNVC: 2

4 Mar 1998

5340-14-517-6931
Mounting Plate

145176931
DB1D236500027: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-355-3380
Retaining Strap

143553380
016065000601: RNCC: 3 | RNVC: 2
016065000601: RNCC: 5 | RNVC: 2

19 Mar 1979

5340-14-521-6066
Arched Cushion

145216066
TA78000014R63WCB: RNCC: 3 | RNVC: 2

30 May 2001

5340-14-555-2785
Mounting Bracket

145552785
82185564000: RNCC: 3 | RNVC: 2

20 Oct 2007

5340-14-452-1254
Blank Panel

144521254
2185107370: RNCC: 3 | RNVC: 2
89436552: RNCC: 5 | RNVC: 2

18 Dec 1991

5340-14-533-6583
Mounting Bracket

145336583
F1262204: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-14-301-8921
Angle Bracket

143018921
A425222: RNCC: 3 | RNVC: 2
A425222: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-528-5924
Mounting Plate

145285924
935583: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-443-5566
Mounting Plate

144435566
7524-0001051: RNCC: 3 | RNVC: 9
CAP230-70-13-01A: RNCC: 5 | RNVC: 9

28 Nov 1990

5340-14-411-3451
Loop Clamp

144113451
R4P702-535: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-486-6110
Butt Hinge

144866110
A10-12-735-39-2: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-14-360-7240
Quick Release Pin

143607240
650-43160-11: RNCC: 3 | RNVC: 2
650-43160-00: RNCC: 5 | RNVC: 2

19 Dec 1979

5340-14-336-0263
Mounting Plate

143360263
501-729-192-0: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-296-1912
Angle Bracket

142961912
121E77-207-02-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-435-0025
Retaining Strap

144350025
ST400S60P83: RNCC: 3 | RNVC: 2

11 Oct 1989

5340-14-445-5055
Retaining Strap

144455055
ST406M52P713: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-497-6801
Mounting Plate

144976801
6K8234: RNCC: 3 | RNVC: 2
F300 0T 023 4848: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-512-8825
Access Cover

145128825
550490: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-473-0018
Butt Hinge

144730018
170210: RNCC: 3 | RNVC: 9

23 Nov 1994

5340-14-502-2154
Mounting Bracket

145022154
0390740030: RNCC: 3 | RNVC: 2

26 Nov 1997

5340-14-371-9009
Pipe Hanger

143719009
24055008900: RNCC: 3 | RNVC: 2
240550089: RNCC: 5 | RNVC: 9
55J89: RNCC: 5 | RNVC: 9

5 Aug 1981

5340-14-454-2539
Bridge Clamp

144542539
16283311: RNCC: 3 | RNVC: 2

26 Mar 1992

5340-14-554-1730
Mounting Bracket

145541730
82054145000: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-483-2079
Filler Opening Cap

144832079
2674611: RNCC: 3 | RNVC: 2

27 Aug 1996

5340-14-542-3024
Mounting Plate

145423024
972739708: RNCC: 3 | RNVC: 2
972739708: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-497-6834
Mounting Plate

144976834
7J380: RNCC: 3 | RNVC: 2
F300 0T 023 4881: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-262-3543
Loop Clamp

142623543
0176-526115: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-554-2718
Access Cover

145542718
82187815000: RNCC: 3 | RNVC: 2

18 Jun 2007

5340-14-526-2509
Access Cover

145262509
10530021: RNCC: 3 | RNVC: 2

11 Jul 2001

5340-14-438-7571
Anchor Strap

144387571
007672010P: RNCC: 3 | RNVC: 2

4 Apr 1990

5340-14-547-3915
Access Cover

145473915
PDE516PE001: RNCC: 3 | RNVC: 2

11 Oct 2005

5340-14-366-8144
Rod End Clevis

143668144
970269: RNCC: 3 | RNVC: 2
970269: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-455-9447
Plate Spacer

144559447
PM1A761160141: RNCC: 3 | RNVC: 2
PM1A761160141: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-402-6410
Anchor Strap

144026410
7700580414: RNCC: 3 | RNVC: 2

19 Jul 1985

5340-14-409-4380
Anchor Strap

144094380
X20296: RNCC: 3 | RNVC: 2
X20296: RNCC: 5 | RNVC: 9

28 May 1986

5340-14-543-5069
Bridge Clamp

145435069
61489909AA: RNCC: 3 | RNVC: 2

11 Nov 2004

5340-14-526-9898
Access Cover

145269898
T257A0006176: RNCC: 3 | RNVC: 2

20 Sep 2001

5340-14-550-4009
Utility Access Door

145504009
2237551320: RNCC: 3 | RNVC: 2

19 Jun 2006

5340-14-541-8394
Loop Clamp

145418394
116.204-269: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-531-2052
Mounting Bracket

145312052
TB5010204: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-470-3109
Mounting Plate

144703109
201717: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-517-0786
Angle Bracket

145170786
MP1779F00: RNCC: 3 | RNVC: 2

3 Nov 1999

5340-14-343-1167
Butt Hinge

143431167
205794: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-554-8856
Loop Clamp

145548856
78651RH6CP: RNCC: 1 | RNVC: 2
78651RH6CP: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-448-0433
Cover Strip

144480433
PM1A237150035: RNCC: 3 | RNVC: 2
PM1A237150035: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-550-0107
Mounting Bracket

145500107
PDE045SU000: RNCC: 3 | RNVC: 2

24 May 2006

5340-14-324-6206
Retaining Strap

143246206
442147: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-408-2027
Butt Hinge

144082027
CPH8E102222: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-349-3199
Vent Plug

143493199
0000140945: RNCC: 3 | RNVC: 2
0000140945: RNCC: 5 | RNVC: 9
140945: RNCC: 5 | RNVC: 9

22 May 1978

5340-14-466-3417
Arched Cushion

144663417
PM1A798400006: RNCC: 3 | RNVC: 2
PM1A798400006: RNCC: 5 | RNVC: 2
85-695-1274: RNCC: 6 | RNVC: 9

3 Nov 1993

5340-14-542-9895
Mounting Plate

145429895
309930/26: RNCC: 3 | RNVC: 2

18 Aug 2004

5340-14-317-9341
Retaining Strap

143179341
341A41-1008-25: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-512-6090
Access Cover

145126090
22-148-400: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-529-4120
Loop Clamp

145294120
452-12044-101: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-348-2012
Loop Clamp

143482012
271315322: RNCC: 3 | RNVC: 2
PF7-3S22: RNCC: 5 | RNVC: 2
PF7-3S22: RNCC: 5 | RNVC: 9

29 Mar 1978

5340-14-421-2216
Webbing Strap

144212216
NO PRIMARY REF14-421-2216: RNCC: 3 | RNVC: 2
371N270: RNCC: 5 | RNVC: 2

11 Jan 1988

5340-14-418-7681
Butt Hinge

144187681
P4C005071-00: RNCC: 3 | RNVC: 9

16 Sep 1987

5340-14-442-0296
Locking Stay

144420296
332A92-1153-00: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-215-9127
Access Cover

142159127
253-5M366P15: RNCC: 3 | RNVC: 9
PA253-5M366P15: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-322-8291
Access Cover

143228291
A00840-03-1110P014: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-455-1647
Protection Bellows

144551647
MAT422-0007F13: RNCC: 3 | RNVC: 2

1 May 1992

5340-14-275-8464
Rod End Clevis

142758464
253-5M312P27: RNCC: 3 | RNVC: 9
PA253-5M312P27: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-319-7368
Retaining Strap

143197368
M2-2522-2102-00: RNCC: 3 | RNVC: 2
M2-2522-2102-00: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-518-7689
Bumper

145187689
7050A36-220-22: RNCC: 1 | RNVC: 2
579-108-00: RNCC: 3 | RNVC: 2

16 Feb 2000

5340-14-206-9169
Loop Clamp

142069169
35G14-5: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-511-0482
Runner

145110482
96191262: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-14-399-2783
Eye Hook

143992783
A11A767521210A1: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-540-1543
Flush Lock

145401543
F00117017: RNCC: 3 | RNVC: 2
F00117017: RNCC: 5 | RNVC: 2

11 Mar 2004

5340-14-555-4140
Loop Clamp

145554140
78651DH8BP: RNCC: 1 | RNVC: 2
78651DH8BP: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-14-412-4358
Mounting Plate

144124358
093253P01TRA: RNCC: 3 | RNVC: 2
093253P: RNCC: 5 | RNVC: 2

15 Oct 1986

5340-14-393-5478
Access Cover

143935478
969312: RNCC: 3 | RNVC: 2
969312: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-14-509-0217
Mounting Plate

145090217
FH152003200: RNCC: 3 | RNVC: 2

14 Oct 1998

5340-14-374-5133
Mending Plate

143745133
16316350: RNCC: 3 | RNVC: 2
16316350: RNCC: 5 | RNVC: 9
16316350: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-488-1464
Access Cover

144881464
0177887010: RNCC: 3 | RNVC: 2

18 Apr 1997

5340-14-457-5872
Pipe Hanger

144575872
PM1A723114100: RNCC: 3 | RNVC: 2
PM1A723114100: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-475-7020
Mounting Bracket

144757020
114738-25: RNCC: 3 | RNVC: 9
ACPS61: RNCC: 5 | RNVC: 2
742691006985: RNCC: 5 | RNVC: 2
742691006985: RNCC: 5 | RNVC: 9

26 Apr 1995

5340-14-521-5842
Permanent Magnet

145215842
TICONAM3X15: RNCC: 3 | RNVC: 2

23 Aug 2000

5340-14-526-2356
Mounting Plate

145262356
H119793: RNCC: 3 | RNVC: 2

11 Jul 2001

5340-14-556-5816
Utility Access Door

145565816
PORTE12434X00: RNCC: 3 | RNVC: 2

26 Mar 2008

5340-14-399-4731
Access Cover

143994731
16696604: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-477-5131
Angle Bracket

144775131
5000538149: RNCC: 3 | RNVC: 2

7 Sep 1995

5340-14-381-6007
Anchor Strap

143816007
398001042100: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-454-0453
Anchor Strap

144540453
4772251400: RNCC: 3 | RNVC: 2
5044208: RNCC: 5 | RNVC: 9

19 Mar 1992

5340-14-438-5983
Webbing Strap

144385983
TB1030909: RNCC: 3 | RNVC: 2

28 Mar 1990

5340-14-266-1681
Retaining Strap

142661681
9138690: RNCC: 3 | RNVC: 2
9138690: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-550-7676
Mounting Plate

145507676
RA1A702736135: RNCC: 3 | RNVC: 2

13 Jul 2006

5340-14-533-8916
Cover Strip

145338916
08-250-938: RNCC: 3 | RNVC: 2
SZ08.250.938: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-551-5112
Mounting Bracket

145515112
RA1B702446141: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-402-0559
Bumper

144020559
612737: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-518-5557
Mounting Bracket

145185557
5000717636: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-543-6892
Angle Bracket

145436892
T257A0006211: RNCC: 3 | RNVC: 2

2 Dec 2004

5340-14-504-3124
Access Cover

145043124
3759263M91: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-533-1568
Mounting Bracket

145331568
S261A1013103: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-14-500-5217
Runner

145005217
30646: RNCC: 3 | RNVC: 2
F300 0T 024 5390: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-482-6101
Metal Grille

144826101
29503989: RNCC: 3 | RNVC: 2

18 Jul 1996

5340-14-518-9839
Utility Access Door

145189839
706810: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-506-5196
Angle Bracket

145065196
NNP5325830701163: RNCC: 3 | RNVC: 9

29 Apr 1998

5340-14-542-6333
Mounting Bracket

145426333
S711A8022406: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-14-503-0323
Plug Button

145030323
5000822174: RNCC: 3 | RNVC: 2

22 Dec 1997

5340-14-452-3805
Block Clamp

144523805
10111656022: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-483-5747
Mounting Plate

144835747
H109311: RNCC: 3 | RNVC: 2

19 Sep 1996

5340-14-403-4440
Angle Bracket

144034440
502300: RNCC: 3 | RNVC: 2
8110208: RNCC: 3 | RNVC: 2
313164: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-462-6778
Anchor Strap

144626778
038963132: RNCC: 3 | RNVC: 9
38963132: RNCC: 5 | RNVC: 9

28 Apr 1993

5340-14-413-8604
Access Cover

144138604
174814: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-537-2392
Lock Key

145372392
915492: RNCC: 3 | RNVC: 2

15 Oct 2003

5340-14-446-1289
Mounting Bracket

144461289
927060: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-515-2295
Access Cover

145152295
0009839701: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-542-2385
Loop Clamp

145422385
700864723: RNCC: 3 | RNVC: 2
700864723: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-511-9957
Bridge Clamp

145119957
0053592: RNCC: 3 | RNVC: 2
4852219: RNCC: 3 | RNVC: 9

2 Feb 1999

5340-14-536-0876
Mounting Bracket

145360876
91300024801: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-494-2757
Access Cover

144942757
10271489: RNCC: 3 | RNVC: 2
F300 0T 016 7960: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-435-4204
Plug Button

144354204
392117: RNCC: 3 | RNVC: 2
392117: RNCC: 5 | RNVC: 9

8 Nov 1989

5340-14-549-8105
Access Cover

145498105
961850109: RNCC: 3 | RNVC: 2

15 May 2006

5340-14-468-1852
Access Cover

144681852
012072220101: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-229-7926
Bumper

142297926
0945990209: RNCC: 3 | RNVC: 2
0945990209: RNCC: 5 | RNVC: 9
945990209: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-532-1476
Access Cover

145321476
23C5535: RNCC: 3 | RNVC: 2

14 Oct 2002

5340-14-455-5963
Mounting Plate

144555963
16661135: RNCC: 3 | RNVC: 2

28 May 1992

5340-14-350-4387
Anchor Strap

143504387
214904: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-439-6788
Mounting Plate

144396788
16291412: RNCC: 3 | RNVC: 2
16291412: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-544-2269
Loop Clamp

145442269
AN100130: RNCC: 3 | RNVC: 2

11 Jan 2005

5340-14-501-7019
Rod End Clevis

145017019
45283927: RNCC: 3 | RNVC: 2
45283927: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-305-7940
Access Cover

143057940
9141: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-413-1272
Angle Bracket

144131272
574024524: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-345-2665
Loop Clamp

143452665
3-2-2606-02-40A: RNCC: 3 | RNVC: 2
3-2-2606-02-40: RNCC: 5 | RNVC: 2

5 Oct 1977

5340-14-500-9271
Loop Clamp

145009271
RSGU1-08-12-W1: RNCC: 3 | RNVC: 2
RSGU1-08-12W1: RNCC: 3 | RNVC: 2
F300 0T 024 9481: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-235-7174
Strapping

142357174
NO PRIMARY REF14-235-7174: RNCC: 3 | RNVC: 2
NTAVR54-9-5X0-4: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-211-1360
Retaining Strap

142111360
24794: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-505-2947
Blank Panel

145052947
2050316M: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-508-5197
Mounting Plate

145085197
10490758: RNCC: 3 | RNVC: 2

16 Sep 1998

5340-14-321-8111
Retaining Strap

143218111
3160S73-74-669: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-031-1707
Angle Bracket

140311707
VDP4821: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-282-8561
Loop Clamp

142828561
511119050151: RNCC: 3 | RNVC: 2
35P15: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-404-6618
Loop Clamp

144046618
5172046900: RNCC: 3 | RNVC: 2
720469: RNCC: 5 | RNVC: 9

20 Nov 1985

5340-14-294-1792
Loop Clamp

142941792
51359005015: RNCC: 3 | RNVC: 2
21K15: RNCC: 5 | RNVC: 2
9562811380: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-462-6831
Mounting Bracket

144626831
970866: RNCC: 3 | RNVC: 2
970866: RNCC: 5 | RNVC: 9

28 Apr 1993

5340-14-520-4539
Webbing Strap

145204539
437135: RNCC: 3 | RNVC: 2

17 May 2000

Load More Results