What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 63 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 63 of 446

5340-14-332-8267
Angle Bracket

143328267
573899878: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-509-1024
Angle Bracket

145091024
JVJT161011: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-346-8784
Bumper

143468784
26256825: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-14-312-2247
Rod End Clevis

143122247
A5-65385: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-568-8231
Utility Resilient Mount

145688231
BFN45-625: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-14-447-2466
Access Cover

144472466
053V01-542259Y: RNCC: 3 | RNVC: 2
0542259Y00: RNCC: 5 | RNVC: 2

15 May 1991

5340-14-358-2965
Loop Clamp

143582965
NO PRIMARY REF14-358-2965: RNCC: 3 | RNVC: 2
P10-6503: RNCC: 5 | RNVC: 2
P10-6503: RNCC: 5 | RNVC: 9

13 Aug 1979

5340-14-355-3023
Locking Stay

143553023
7371282106: RNCC: 3 | RNVC: 2
9183-12: RNCC: 5 | RNVC: 2

19 Mar 1979

5340-14-557-1600
Utility Resilient Mount

145571600
C1260-13CM2: RNCC: 3 | RNVC: 2

22 May 2008

5340-14-349-4403
Mounting Bracket

143494403
0294307830: RNCC: 3 | RNVC: 2
302-297-702U: RNCC: 5 | RNVC: 2

22 May 1978

5340-14-306-3244
Buckle

143063244
NO PRIMARY REF14-306-3244: RNCC: 3 | RNVC: 2
AB71: RNCC: 5 | RNVC: 2
3055-00-00-02-03: RNCC: 5 | RNVC: 9
3055-01-00: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-259-5121
Runner

142595121
RU761-43M311-1P3C: RNCC: 3 | RNVC: 2
761-43M311-1P3C: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-374-2062
Plug Button

143742062
6255-22106: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-231-0920
Loop Clamp

142310920
51115305017: RNCC: 3 | RNVC: 2
A0021-25S17: RNCC: 5 | RNVC: 2
25S17: RNCC: 5 | RNVC: 2
ASNA0021-25S17: RNCC: 5 | RNVC: 2
A0021-25S17: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-512-2120
Mounting Bracket

145122120
REF06-129: RNCC: 3 | RNVC: 2

8 Feb 1999

5340-14-536-4485
Loop Clamp

145364485
EN4114S25NH0: RNCC: 3 | RNVC: 2

21 Aug 2003

5340-14-402-8068
Loop Clamp

144028068
1233190270: RNCC: 3 | RNVC: 2
PF12A3CN27: RNCC: 5 | RNVC: 2
PF12A3NC27: RNCC: 5 | RNVC: 9
PF12A3NC27: RNCC: 5 | RNVC: 9
85-801-0529: RNCC: 6 | RNVC: 9

19 Jul 1985

5340-14-463-1310
Bow Handle

144631310
27-99929-001-00: RNCC: 3 | RNVC: 2
27-99929-001-00: RNCC: 5 | RNVC: 9

26 May 1993

5340-14-501-1508
Mounting Bracket

145011508
014.010.174: RNCC: 3 | RNVC: 2
014-010-174: RNCC: 3 | RNVC: 2
F300 0T 025 1910: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-391-3908
Mounting Plate

143913908
S8002LS025F8FTYPE4A: RNCC: 3 | RNVC: 2
S8002LS025F8F4A: RNCC: 5 | RNVC: 2

1 Mar 1984

5340-14-236-9717
Loop Clamp

142369717
062057280: RNCC: 3 | RNVC: 9
701268: RNCC: 5 | RNVC: 9
57280: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-305-7023
Butt Hinge

143057023
MS7524-1A7200: RNCC: 3 | RNVC: 2
MS7524-1A7200: RNCC: 3 | RNVC: 2
481899: RNCC: 5 | RNVC: 2
MS7524-1A7200: RNCC: 5 | RNVC: 2
MS7524-1A: RNCC: 5 | RNVC: 9
MS7524-1A72: RNCC: 5 | RNVC: 9
MS7524-1A1830: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-350-5073
Access Cover

143505073
6511-05112: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-532-3209
Access Cover

145323209
192E590-00: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-524-4675
Runner

145244675
2524PD0428: RNCC: 3 | RNVC: 2
B031908: RNCC: 5 | RNVC: 2

21 Mar 2001

5340-14-547-8854
Eye Hook

145478854
SA30215: RNCC: 3 | RNVC: 2

22 Nov 2005

5340-14-546-0030
Mounting Plate

145460030
FA7B1 088 05 P RQ1TF0010500A: RNCC: 3 | RNVC: 2

2 Jun 2005

5340-14-464-8277
Rim Lock Set

144648277
12410-1-49N: RNCC: 3 | RNVC: 2

1 Sep 1993

5340-14-424-2861
Angle Bracket

144242861
0185101210: RNCC: 3 | RNVC: 2
89414559: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-415-0579
Compression Cup

144150579
400145: RNCC: 3 | RNVC: 2

26 Mar 1987

5340-14-523-8673
Stand Base

145238673
5617761A: RNCC: 3 | RNVC: 2

8 Feb 2001

5340-14-431-7614
Angle Bracket

144317614
39254199: RNCC: 3 | RNVC: 2
39254199: RNCC: 3 | RNVC: 9

10 May 1989

5340-14-326-2855
Retaining Strap

143262855
341A27-5050-20: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-550-4887
Angle Bracket

145504887
RA1M701852331N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-549-9180
Mounting Plate

145499180
41106608: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-518-7252
Threaded Rod End

145187252
8020964A00: RNCC: 3 | RNVC: 2

16 Feb 2000

5340-14-480-3946
Loop Clamp

144803946
15177337: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-549-0919
Angle Bracket

145490919
RA1M704115648: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-465-8603
Mounting Bracket

144658603
5010054096: RNCC: 3 | RNVC: 2

14 Oct 1993

5340-14-545-7922
Mounting Bracket

145457922
713405: RNCC: 3 | RNVC: 2

16 May 2005

5340-14-542-2982
Mounting Bracket

145422982
955403508: RNCC: 3 | RNVC: 2
955403508: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-551-3361
Pipe Hanger

145513361
RA1A701346715N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-451-2499
Pipe Hanger

144512499
PM1A726172120: RNCC: 3 | RNVC: 2
PM1A726172120: RNCC: 5 | RNVC: 2

6 Nov 1991

5340-14-438-2380
Mounting Plate

144382380
DA2C450280213: RNCC: 3 | RNVC: 2

7 Mar 1990

5340-14-445-0392
Synchro Clamp

144450392
192541: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-14-508-6293
Mounting Plate

145086293
009473041P: RNCC: 3 | RNVC: 2

23 Sep 1998

5340-14-519-1990
Metal Grille

145191990
1SH41598367: RNCC: 3 | RNVC: 2

14 Mar 2000

5340-14-422-4590
Mounting Plate

144224590
235562: RNCC: 3 | RNVC: 2

3 Mar 1988

5340-14-394-6395
Mounting Plate

143946395
79099468: RNCC: 3 | RNVC: 2
79099468: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-513-0579
Webbing Strap

145130579
009593035P: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-14-382-6466
Expansion Plug

143826466
485-004-667-3: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-227-9350
Mending Plate

142279350
23001082: RNCC: 3 | RNVC: 2
23001082-7: RNCC: 5 | RNVC: 2
6-634: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-308-3988
Swivel Caster

143083988
52200SP: RNCC: 3 | RNVC: 2
52200SP-71116: RNCC: 5 | RNVC: 2
52-200SP: RNCC: 5 | RNVC: 2
DR5-2200SP: RNCC: 5 | RNVC: 2
85-686-2151: RNCC: 6 | RNVC: 9

1 Jan 1974

5340-14-468-5523
Lock-Release Lever

144685523
622080: RNCC: 3 | RNVC: 2
622080: RNCC: 5 | RNVC: 9

8 Mar 1994

5340-14-467-6622
Retaining Strap

144676622
262859: RNCC: 3 | RNVC: 2
J05527-11-0100P007: RNCC: 5 | RNVC: 2
262859-001: RNCC: 5 | RNVC: 9

19 Jan 1994

5340-14-473-6482
Bow Handle

144736482
332A22-1920-0401: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-463-6122
Loop Clamp

144636122
2095NA: RNCC: 3 | RNVC: 2
12230940-1: RNCC: 5 | RNVC: 2

21 Jun 1993

5340-14-031-6941
Retaining Strap

140316941
C58000-282: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-521-4080
T Bracket

145214080
10482841: RNCC: 3 | RNVC: 2

26 Jul 2000

5340-14-204-4124
Cover Strip

142044124
3130S28-01-095: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-453-4256
Magnetic Catch

144534256
16-7-3385: RNCC: 3 | RNVC: 2

19 Feb 1992

5340-14-499-6887
Mounting Bracket

144996887
T5260280: RNCC: 3 | RNVC: 2
F300 0T 023 6745: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-383-7634
Loop Clamp

143837634
GARD232100600: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-498-9674
Mounting Plate

144989674
5000293378: RNCC: 3 | RNVC: 2
A07110536: RNCC: 5 | RNVC: 9
A07110536: RNCC: 5 | RNVC: 9

29 Oct 1997

5340-14-491-2318
Access Cover

144912318
616096: RNCC: 3 | RNVC: 2
F300 0T 001 9477: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-477-4439
Access Cover

144774439
10058781: RNCC: 3 | RNVC: 2

30 Aug 1995

5340-14-443-0562
Cover Strip

144430562
PM1A226112006: RNCC: 3 | RNVC: 2
PM1A226112006: RNCC: 5 | RNVC: 2

7 Nov 1990

5340-14-510-9419
Mounting Plate

145109419
29485627: RNCC: 3 | RNVC: 2

24 Nov 1998

5340-14-479-7798
Mounting Plate

144797798
P046858: RNCC: 3 | RNVC: 2
Z00.N6000707227TBM: RNCC: 5 | RNVC: 2

7 Feb 1996

5340-14-481-4544
Retaining Strap

144814544
34 99 04: RNCC: 3 | RNVC: 2

8 May 1996

5340-14-502-7025
Mounting Bracket

145027025
1083874: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-385-0749
Mounting Plate

143850749
413977: RNCC: 3 | RNVC: 2
E25821: RNCC: 5 | RNVC: 2

2 Jun 1983

5340-14-527-4348
Bow Handle

145274348
V107213: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-407-7058
Control Rod

144077058
1E83242410: RNCC: 3 | RNVC: 9

27 Feb 1986

5340-14-482-3145
Mounting Bracket

144823145
3511 192 98791: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-14-489-8258
Retaining Strap

144898258
E4690254: RNCC: 3 | RNVC: 9

22 Aug 1997

5340-14-381-3990
Bumper

143813990
0265: RNCC: 3 | RNVC: 2
897892M1: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-475-6367
Webbing Strap

144756367
363005: RNCC: 3 | RNVC: 2

24 Apr 1995

5340-14-466-2993
Mounting Bracket

144662993
A68571: RNCC: 3 | RNVC: 2

3 Nov 1993

5340-14-445-3841
Bumper

144453841
BLC234106: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-14-517-8213
Mounting Plate

145178213
S4572964: RNCC: 3 | RNVC: 2

13 Jan 2000

5340-14-541-6810
Support Hook

145416810
T711A1001317: RNCC: 3 | RNVC: 2

17 Jun 2004

5340-14-441-3162
Rod End Clevis

144413162
37157: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-526-8100
Synchro Clamp

145268100
5000336963: RNCC: 3 | RNVC: 2

7 Sep 2001

5340-14-365-1358
Retaining Strap

143651358
969469: RNCC: 3 | RNVC: 2
969469: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-452-1197
Webbing Strap

144521197
01802-1L5M: RNCC: 3 | RNVC: 2
91593623: RNCC: 5 | RNVC: 2

18 Dec 1991

5340-14-456-4239
Retaining Strap

144564239
0823892102: RNCC: 3 | RNVC: 2

2 Jul 1992

5340-14-434-0764
Access Cover

144340764
543456: RNCC: 3 | RNVC: 2

4 Sep 1989

5340-14-446-1866
Mounting Plate

144461866
2510115110-01: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-540-2037
Access Cover

145402037
9612856380: RNCC: 3 | RNVC: 2

11 Mar 2004

5340-14-469-7233
Mounting Plate

144697233
332A81-0535-22: RNCC: 3 | RNVC: 2

4 May 1994

5340-14-541-4927
Butt Hinge

145414927
60-1-3762: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-530-8728
Access Cover

145308728
5803864Y00: RNCC: 3 | RNVC: 2

10 Jul 2002

5340-14-431-4081
Anchor Strap

144314081
007337080P: RNCC: 3 | RNVC: 2

17 Apr 1989

5340-14-487-6464
Plug Button

144876464
2030964S: RNCC: 3 | RNVC: 2

18 Apr 1997

5340-14-542-5157
Utility Access Door

145425157
1SH41820340: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-14-413-0819
Angle Bracket

144130819
9760-60: RNCC: 3 | RNVC: 9

26 Nov 1986

5340-14-290-2325
Retaining Strap

142902325
330A75-1962-00: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-442-7806
Arched Cushion

144427806
BA30089050-66: RNCC: 2 | RNVC: 2

5 Nov 1990

5340-14-446-3900
Loop Clamp

144463900
NO PRIMARY REF14-446-3900: RNCC: 3 | RNVC: 2
PTR.54.100: RNCC: 5 | RNVC: 9

18 Mar 1991

5340-14-385-8236
Pipe Hanger

143858236
E95000-015: RNCC: 3 | RNVC: 2
408C070707C53: RNCC: 5 | RNVC: 2

26 Jul 1983

5340-14-399-7252
Bail Handle

143997252
NO PRIMARY REF14-399-7252: RNCC: 3 | RNVC: 2
M4ZS761D1057: RNCC: 5 | RNVC: 9

14 Mar 1985

5340-14-392-6697
Angle Bracket

143926697
168351: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-292-3268
Lock-Release Lever

142923268
FAVSCR38-274NU: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-512-2171
Access Cover

145122171
4374-0023: RNCC: 3 | RNVC: 2

8 Feb 1999

5340-14-442-1748
Access Cover

144421748
20294220: RNCC: 3 | RNVC: 2

3 Oct 1990

5340-14-376-6607
Mending Plate

143766607
420066T: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-404-0443
Bumper

144040443
366A27-3613-47: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-406-4696
Retaining Clip

144064696
FG1E761-12-05: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-374-4908
Angle Bracket

143744908
A11A221220074: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-463-6125
Loop Clamp

144636125
2123NA: RNCC: 3 | RNVC: 2
13942669-0: RNCC: 5 | RNVC: 2

21 Jun 1993

5340-14-507-9369
Retaining Clip

145079369
054404: RNCC: 3 | RNVC: 9
91798205: RNCC: 5 | RNVC: 2
1054404: RNCC: 5 | RNVC: 9
F300 0T 021 8919: RNCC: 6 | RNVC: 9

26 Aug 1998

5340-14-461-7718
Angle Bracket

144617718
4772820220: RNCC: 3 | RNVC: 2
5046075: RNCC: 5 | RNVC: 9

24 Mar 1993

5340-14-400-9691
Loop Clamp

144009691
21S0600604: RNCC: 3 | RNVC: 2
21S0600604: RNCC: 5 | RNVC: 2

21 May 1985

5340-14-533-8119
Mounting Bracket

145338119
8032925N00: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-227-8718
Loop Clamp

142278718
769165A: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-453-4284
Corner Brace

144534284
16868065: RNCC: 3 | RNVC: 2

19 Feb 1992

5340-14-481-3733
Angle Bracket

144813733
066548Z: RNCC: 3 | RNVC: 2
066548Z: RNCC: 5 | RNVC: 2

1 May 1996

5340-14-446-7157
Angle Bracket

144467157
39958459: RNCC: 3 | RNVC: 2
39958459: RNCC: 5 | RNVC: 9

9 Apr 1991

5340-14-517-9521
Retaining Strap

145179521
20194927: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-14-336-7174
Clamping Catch

143367174
GP02BR: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-522-6139
Mounting Plate

145226139
2351225: RNCC: 3 | RNVC: 2

8 Nov 2000

5340-14-550-9223
Angle Bracket

145509223
RA1B702446103: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-462-2844
Dashpot

144622844
SMCFAGEC0062A: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-14-519-5622
Mounting Plate

145195622
5000684477: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-348-6813
Angle Bracket

143486813
225234: RNCC: 3 | RNVC: 2
225234: RNCC: 5 | RNVC: 9

19 Apr 1978

5340-14-428-6277
Block Clamp

144286277
LB10211556027: RNCC: 3 | RNVC: 2
10211556027: RNCC: 5 | RNVC: 2

8 Dec 1988

5340-14-523-3191
Mounting Plate

145233191
CPR3B3104004: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-470-4064
Bridge Clamp

144704064
0390750490: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-461-1231
Angle Bracket

144611231
29505740: RNCC: 3 | RNVC: 2
29505740: RNCC: 5 | RNVC: 2

24 Feb 1993

5340-14-387-2138
Retaining Strap

143872138
5610501439: RNCC: 3 | RNVC: 2
5610501439: RNCC: 5 | RNVC: 9

15 Sep 1983

5340-14-355-7377
Bumper

143557377
A11A222100009: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-444-2508
Mounting Plate

144442508
503B102: RNCC: 3 | RNVC: 2

18 Dec 1990

5340-14-357-5330
Angle Bracket

143575330
A11A221160430: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-461-1680
Mounting Bracket

144611680
4772920130: RNCC: 3 | RNVC: 2
5046024: RNCC: 5 | RNVC: 9

24 Feb 1993

5340-14-551-5313
Cover Strip

145515313
SZ00.251.197: RNCC: 3 | RNVC: 2

28 Sep 2006

5340-14-287-1433
Retaining Strap

142871433
712272: RNCC: 3 | RNVC: 9
062712272: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-518-5765
Access Cover

145185765
5001821991: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-471-3179
Protection Bellows

144713179
623709: RNCC: 3 | RNVC: 2

23 Aug 1994

5340-14-547-1625
Loop Clamp

145471625
68961313: RNCC: 3 | RNVC: 2

29 Sep 2005

5340-14-448-3892
Webbing Strap

144483892
9402CRL107: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-14-530-6834
Mounting Plate

145306834
T530A0011146: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-420-6720
Retaining Strap

144206720
409513020000: RNCC: 3 | RNVC: 2

16 Dec 1987

5340-14-546-5907
Retaining Strap

145465907
RA1M701126441N1: RNCC: 3 | RNVC: 2

20 Jul 2005

5340-14-518-0968
Angle Bracket

145180968
0000758869: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-341-7472
Mending Plate

143417472
160169: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-363-1120
Retaining Strap

143631120
216631: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-14-546-2052
Angle Bracket

145462052
RA1A706116031N1: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-287-1673
Bumper

142871673
16110-18: RNCC: 3 | RNVC: 2
1916M043: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-505-0503
Retaining Strap

145050503
0007006246: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-551-5057
Retaining Strap

145515057
RA1B701666822: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-555-3207
Mounting Bracket

145553207
82115913000: RNCC: 3 | RNVC: 2

24 Oct 2007

5340-14-303-3271
Angle Bracket

143033271
184116: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-359-1136
Angle Bracket

143591136
A11A232952080A1: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-392-7128
Clamping Catch

143927128
212737: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-464-5638
Dashpot

144645638
1075083G00: RNCC: 3 | RNVC: 2

9 Aug 1993

5340-14-555-9496
Webbing Strap

145559496
714691: RNCC: 3 | RNVC: 2

14 Jan 2008

5340-14-531-7060
Mounting Bracket

145317060
888-445-203-0: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-14-545-3688
Cover Strip

145453688
307-246-851-0: RNCC: 3 | RNVC: 2

8 Apr 2005

5340-14-365-3580
Pipe Hanger

143653580
304-004-401-0: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-278-3319
Pipe Hanger

142783319
160-11524-40: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-456-3222
Loop Clamp

144563222
E1M-3712-01: RNCC: 3 | RNVC: 2
E1M3712-01: RNCC: 5 | RNVC: 2
MAT169-0024F12ROUGE: RNCC: 5 | RNVC: 2
E1M3712-01: RNCC: 5 | RNVC: 2

25 Jun 1992

5340-14-438-2722
Lock-Release Lever

144382722
815-0-79-836: RNCC: 3 | RNVC: 2

12 Mar 1990

5340-14-486-0631
Angle Bracket

144860631
332A76-2143-20: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-407-7177
Runner

144077177
NO PRIMARY REF14-407-7177: RNCC: 3 | RNVC: 2
29029-109: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-14-470-3893
Angle Bracket

144703893
HL54-710000: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-469-0567
Angle Bracket

144690567
36-7416-020: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-14-317-5483
Bail Handle

143175483
NO PRIMARY REF14-317-5483: RNCC: 3 | RNVC: 2
5686104: RNCC: 5 | RNVC: 9
P0IGNEE0CT568: RNCC: 5 | RNVC: 9
P0IGNEE0CT569: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-353-6791
Loop Clamp

143536791
501-804-538-0: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-522-9069
Mounting Plate

145229069
500-75-00-7: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-14-508-0077
Loop Clamp

145080077
LNG210-10PA: RNCC: 3 | RNVC: 2
8920900011: RNCC: 5 | RNVC: 9
8920700011: RNCC: 5 | RNVC: 9

26 Aug 1998

5340-14-439-2106
Mounting Bracket

144392106
16008594: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-540-7273
Mounting Plate

145407273
38051414: RNCC: 3 | RNVC: 2
438845: RNCC: 5 | RNVC: 2
4848ZG8613181209: RNCC: 6 | RNVC: 9

22 Apr 2004

5340-14-501-0143
Loop Clamp

145010143
80G14: RNCC: 3 | RNVC: 2
F300 0T 025 0438: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-381-1123
Snap Hook

143811123
004911013M: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-364-5853
Mending Plate

143645853
5000495731: RNCC: 3 | RNVC: 2
5000495731: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-460-9175
Mounting Bracket

144609175
TB4011872: RNCC: 3 | RNVC: 2

16 Feb 1993

5340-14-522-8813
Loop Clamp

145228813
6348: RNCC: 3 | RNVC: 2
9463321263: RNCC: 5 | RNVC: 2

6 Dec 2000

5340-14-478-1376
Retaining Strap

144781376
034400: RNCC: 3 | RNVC: 2

11 Oct 1995

5340-14-502-8359
Mounting Bracket

145028359
9R3527: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-548-6283
Angle Bracket

145486283
RA1M704826251A1N1: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-525-6787
Self-Locking Insert

145256787
20 242 090 1540: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-240-8392
Mounting Bracket

142408392
70861611: RNCC: 3 | RNVC: 2
70861611: RNCC: 5 | RNVC: 9
T861611: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-357-9290
Retaining Strap

143579290
217371: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-14-540-6834
Mounting Plate

145406834
38051576: RNCC: 3 | RNVC: 2
ND065397: RNCC: 5 | RNVC: 2
4848ZG8613180589: RNCC: 6 | RNVC: 9

20 Apr 2004

5340-14-397-9747
Loop Clamp

143979747
242770: RNCC: 3 | RNVC: 2
644767: RNCC: 5 | RNVC: 2

31 Jan 1985

5340-14-527-4951
Support Hook

145274951
BMU010110612U2: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-14-497-6626
Mounting Plate

144976626
6K1359: RNCC: 3 | RNVC: 2
F300 0T 023 4672: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-429-9712
Synchro Clamp

144299712
000200164800: RNCC: 3 | RNVC: 2

21 Feb 1989

5340-14-533-4297
Angle Bracket

145334297
F1262636: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-530-9434
Mounting Bracket

145309434
45684206: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-14-502-8782
Mounting Bracket

145028782
9X0399: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-545-4681
Block Clamp

145454681
A11A704103260: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-360-6435
Bumper

143606435
NO PRIMARY REF14-360-6435: RNCC: 3 | RNVC: 2
5560794: RNCC: 5 | RNVC: 9

19 Dec 1979

5340-14-360-4453
Rod End Clevis

143604453
EA1M141-37-811: RNCC: 3 | RNVC: 2

23 Nov 1979

5340-14-489-6210
Access Cover

144896210
332A58-5079-0251: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-365-7210
Access Cover

143657210
M393-210105: RNCC: 3 | RNVC: 2

8 Oct 1980

5340-14-360-4931
Runner

143604931
429802: RNCC: 3 | RNVC: 2
J00679-21-0000P009: RNCC: 5 | RNVC: 2
429802-001: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-489-2202
Mounting Bracket

144892202
614300-100: RNCC: 3 | RNVC: 2
614300-100: RNCC: 5 | RNVC: 9
5820AA2004093: RNCC: 6 | RNVC: 9

2 Jul 1997

5340-14-317-6538
Rod End Clevis

143176538
NO PRIMARY REF14-317-6538: RNCC: 3 | RNVC: 2
155H595: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-531-9999
Runner

145319999
MAT291-0555F2: RNCC: 3 | RNVC: 2

7 Oct 2002

5340-14-517-7038
Mounting Bracket

145177038
6920-010A: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-410-0763
Loop Clamp

144100763
61100001012: RNCC: 3 | RNVC: 2
HB245N12: RNCC: 5 | RNVC: 2
85-693-2909: RNCC: 6 | RNVC: 9

4 Jun 1986

5340-14-220-4852
Mending Plate

142204852
NO PRIMARY REF14-220-4852: RNCC: 3 | RNVC: 2
631452: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-421-4223
Plug Button

144214223
BO52150-01: RNCC: 3 | RNVC: 2
B052150-01: RNCC: 5 | RNVC: 2

14 Jan 1988

5340-14-227-7909
Rod End Clevis

142277909
NO PRIMARY REF14-227-7909: RNCC: 3 | RNVC: 2
2J8300: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-449-6068
Mounting Plate

144496068
0050-F0-01: RNCC: 3 | RNVC: 9

28 Aug 1991

5340-14-402-6071
Angle Bracket

144026071
404046: RNCC: 3 | RNVC: 2
BGE404046: RNCC: 5 | RNVC: 2

19 Jul 1985

5340-14-445-3319
Bumper

144453319
231624Q: RNCC: 3 | RNVC: 2

11 Feb 1991

5340-14-399-9225
Control Rod

143999225
59260: RNCC: 3 | RNVC: 9

24 Apr 1985

5340-14-507-9511
Mounting Bracket

145079511
25631781: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-409-3058
Shimmy Damper

144093058
DLT131148: RNCC: 3 | RNVC: 2

27 May 1986

5340-14-550-4190
Expansion Plug

145504190
2714590920: RNCC: 3 | RNVC: 2

20 Jun 2006

5340-14-551-1137
Mounting Bracket

145511137
5010323584: RNCC: 3 | RNVC: 2

28 Aug 2006

5340-14-471-7239
Mounting Bracket

144717239
2017656M: RNCC: 3 | RNVC: 2

14 Sep 1994

5340-14-470-7548
Mounting Plate

144707548
AMG251046: RNCC: 3 | RNVC: 2
251046: RNCC: 5 | RNVC: 2

6 Jul 1994

5340-14-326-4183
Tubular Fairlead

143264183
131074B: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-500-4534
Mounting Plate

145004534
E63206300003: RNCC: 3 | RNVC: 2
F300 0T 024 4703: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-454-6079
Angle Bracket

144546079
0120770010: RNCC: 3 | RNVC: 2
0120770010: RNCC: 5 | RNVC: 2

8 Apr 1992

5340-14-527-6540
Angle Bracket

145276540
700205: RNCC: 3 | RNVC: 2

7 Nov 2001

5340-14-428-2399
Webbing Strap

144282399
16379472: RNCC: 3 | RNVC: 2
16379472: RNCC: 5 | RNVC: 9

8 Dec 1988

5340-14-305-3388
Angle Bracket

143053388
26248873: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-366-9119
Loop Clamp

143669119
626087: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-466-1828
Mounting Plate

144661828
166094: RNCC: 3 | RNVC: 2
89170196: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-548-4577
Mounting Bracket

145484577
077112: RNCC: 3 | RNVC: 2

18 Jan 2006

5340-14-505-0142
Protection Bellows

145050142
5000723658: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-546-7328
Blank Panel

145467328
S258A4012115: RNCC: 3 | RNVC: 2

9 Aug 2005

5340-14-446-2486
Retaining Strap

144462486
095043H: RNCC: 3 | RNVC: 2

11 Mar 1991

5340-14-505-4361
Pipe Hanger

145054361
12202008: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-488-2478
Leakproof Seal Plug

144882478
R43601REP7: RNCC: 3 | RNVC: 2

23 Apr 1997

5340-14-423-0509
Runner

144230509
39529268: RNCC: 3 | RNVC: 2
39529268: RNCC: 5 | RNVC: 9

31 Mar 1988

5340-14-550-4414
Angle Bracket

145504414
MJ1333F00: RNCC: 3 | RNVC: 2

20 Jun 2006

5340-14-497-6349
Mounting Plate

144976349
5K601: RNCC: 3 | RNVC: 2
F300 0T 023 4393: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-325-9127
Key Blank

143259127
25511B10X10XC38: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-554-3269
Mounting Plate

145543269
82373983000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-455-5990
Mounting Bracket

144555990
EDM0551: RNCC: 3 | RNVC: 2
91399047: RNCC: 5 | RNVC: 2

28 May 1992

5340-14-553-8459
Mounting Bracket

145538459
82120427000: RNCC: 3 | RNVC: 2

23 May 2007

5340-14-421-7559
Doorknob

144217559
5008606: RNCC: 3 | RNVC: 2
89410519: RNCC: 5 | RNVC: 2
5008606: RNCC: 5 | RNVC: 9

27 Jan 1988

5340-14-509-6535
Cover Strip

145096535
RA1M126090021: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-529-0615
Mounting Bracket

145290615
10576394: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-14-362-2544
Angle Bracket

143622544
A11A211160050: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-504-2197
Mounting Bracket

145042197
3467466M91: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-485-9759
Anchor Strap

144859759
576447: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-554-1726
Mounting Bracket

145541726
82051959001: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-543-7286
Access Cover

145437286
943388598: RNCC: 3 | RNVC: 2

7 Dec 2004

5340-14-279-2343
Mending Plate

142792343
30843: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-396-1640
Access Cover

143961640
569649G0005: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-265-1376
Loop Clamp

142651376
552183203101: RNCC: 3 | RNVC: 2
55218-320B316DB: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-532-5001
Access Door Hinge

145325001
09-151-00: RNCC: 3 | RNVC: 2
SZ09.151.00: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-14-419-1948
Webbing Strap

144191948
NO PRIMARY REF14-419-1948: RNCC: 3 | RNVC: 2
TR50N1803-2LG0-5M+371N534+371N54: RNCC: 5 | RNVC: 2

13 Oct 1987

5340-14-368-2999
Angle Bracket

143682999
J69281-14: RNCC: 3 | RNVC: 2
301726: RNCC: 5 | RNVC: 2
J69281-14: RNCC: 5 | RNVC: 2

20 Feb 1981

5340-14-384-3180
Loop Clamp

143843180
51425305007: RNCC: 3 | RNVC: 2
28SE7: RNCC: 5 | RNVC: 2

4 May 1983

5340-14-522-7931
Plug Button

145227931
RSM-37947-F20REP9: RNCC: 3 | RNVC: 2

23 Nov 2000

5340-14-409-8009
Anchor Strap

144098009
M397-02-10-61-11: RNCC: 3 | RNVC: 2
453-80343-000: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-433-8568
Retaining Strap

144338568
412703050011: RNCC: 3 | RNVC: 2

17 Aug 1989

5340-14-502-8047
Retaining Clip

145028047
8T1889: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-031-1060
Loop Clamp

140311060
0035741011: RNCC: 3 | RNVC: 2
0035741011: RNCC: 5 | RNVC: 9

14 Jun 1980

5340-14-482-8190
Access Cover

144828190
39478495: RNCC: 3 | RNVC: 2

25 Jul 1996

5340-14-332-1642
Bumper

143321642
0036875649: RNCC: 3 | RNVC: 2
0036875649: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-532-0123
Webbing Strap

145320123
A09905133: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-041-3282
Retaining Clip

140413282
16179600: RNCC: 3 | RNVC: 2
16179600: RNCC: 5 | RNVC: 2
16179600: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-305-2777
Angle Bracket

143052777
26244365: RNCC: 3 | RNVC: 2
C244365: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-426-4217
Rod End Clevis

144264217
60589: RNCC: 3 | RNVC: 2

30 Aug 1988

5340-14-371-3941
Access Cover

143713941
130761: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-351-0078
Rod End Clevis

143510078
214474: RNCC: 3 | RNVC: 2
188113: RNCC: 5 | RNVC: 2

10 Aug 1978

5340-14-432-2585
Mounting Bracket

144322585
A0H25898R5: RNCC: 3 | RNVC: 2

31 May 1989

5340-14-412-9477
Rod End Clevis

144129477
63700ADL: RNCC: 3 | RNVC: 2

5 Nov 1986

5340-14-221-6187
Access Cover

142216187
061700831: RNCC: 3 | RNVC: 9
062055844: RNCC: 5 | RNVC: 9
55844: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-470-6670
Access Cover

144706670
K45A18: RNCC: 3 | RNVC: 2
K45A18: RNCC: 5 | RNVC: 9

29 Jun 1994

5340-14-508-7572
Angle Bracket

145087572
4773420810: RNCC: 3 | RNVC: 2
46234160: RNCC: 3 | RNVC: 2
46234160: RNCC: 5 | RNVC: 9

30 Sep 1998

5340-14-306-2339
Access Cover

143062339
24C8054: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-461-1620
Access Door Hinge

144611620
4772820020: RNCC: 3 | RNVC: 2
5046059: RNCC: 5 | RNVC: 9

24 Feb 1993

5340-14-542-2525
Access Cover

145422525
779019008: RNCC: 3 | RNVC: 2
779019008: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-404-5533
Webbing Strap

144045533
006079050P: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-486-3044
Blank Panel

144863044
MP1583F00: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-325-9161
Key Blank

143259161
25511B12-7X12-7XC38: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-403-9341
Anchor Strap

144039341
132167: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-398-9456
Retaining Strap

143989456
6160847: RNCC: 3 | RNVC: 2
FOE6160847: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-470-8991
Mending Plate

144708991
M152AA20: RNCC: 3 | RNVC: 2
M152AA20: RNCC: 5 | RNVC: 9

13 Jul 1994

5340-14-497-6425
Mounting Plate

144976425
5S5073: RNCC: 3 | RNVC: 2
F300 0T 023 4470: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-537-8038
Retaining Strap

145378038
8046840X00: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-14-512-0079
Loop Clamp

145120079
0051282: RNCC: 3 | RNVC: 2

2 Feb 1999

5340-14-486-4787
Rigid Caster

144864787
9301061010: RNCC: 3 | RNVC: 2
1125840S00: RNCC: 5 | RNVC: 2

21 Mar 1997

5340-14-546-2896
Mounting Bracket

145462896
10666109000: RNCC: 3 | RNVC: 2

22 Jun 2005

5340-14-349-3042
Retaining Strap

143493042
TH20B2820: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-554-1749
Mounting Bracket

145541749
82078160000: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-508-6592
Mounting Bracket

145086592
SUPPO94740X00: RNCC: 3 | RNVC: 2

23 Sep 1998

5340-14-314-5358
Retaining Strap

143145358
102070: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-543-6269
Strap Hinge

145436269
AMPC GENE E223413: RNCC: 3 | RNVC: 2

26 Nov 2004

5340-14-224-4187
Loop Clamp

142244187
51111905019: RNCC: 3 | RNVC: 2
25P19: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-553-4321
Mounting Plate

145534321
0319950140: RNCC: 3 | RNVC: 2

4 Apr 2007

5340-14-554-6495
Mounting Bracket

145546495
82105118000: RNCC: 3 | RNVC: 2

31 Jul 2007

5340-14-558-9928
Utility Access Door

145589928
82124151003: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-14-554-2218
Mounting Bracket

145542218
9405.46755: RNCC: 3 | RNVC: 2

13 Jun 2007

5340-14-514-0527
Section Block Clamp

145140527
RA1M703754145: RNCC: 3 | RNVC: 2

22 Apr 1999

5340-14-503-3146
Mounting Plate

145033146
43353: RNCC: 3 | RNVC: 2

9 Jan 1998

5340-14-422-4528
Angle Bracket

144224528
187071: RNCC: 3 | RNVC: 2

3 Mar 1988

5340-14-390-4908
Bumper

143904908
781106: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-349-3041
Retaining Strap

143493041
TH20B2819: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-437-6057
Cover Strip

144376057
PM1A121113021: RNCC: 3 | RNVC: 2
PM1A121113021: RNCC: 5 | RNVC: 2

7 Feb 1990

5340-14-531-5967
Retaining Strap

145315967
36568153: RNCC: 3 | RNVC: 2
36568153: RNCC: 3 | RNVC: 2

3 Sep 2002

5340-14-364-2184
Loop Clamp

143642184
CR2846: RNCC: 3 | RNVC: 9

7 Aug 1980

5340-14-554-1451
Mounting Plate

145541451
82378735000: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-453-7340
Mounting Bracket

144537340
16393883: RNCC: 3 | RNVC: 2

5 Mar 1992

5340-14-395-3078
Webbing Strap

143953078
655RE25: RNCC: 3 | RNVC: 9

2 Oct 1984

5340-14-498-6807
Angle Bracket

144986807
5000606758: RNCC: 3 | RNVC: 2
5000606758: RNCC: 5 | RNVC: 9
F300 0T 007 6505: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-539-7168
Loop Clamp

145397168
457-12449-000: RNCC: 3 | RNVC: 2

4 Feb 2004

5340-14-488-4283
Rod End Clevis

144884283
66935-67-27386PA: RNCC: 3 | RNVC: 2
67-27386PA: RNCC: 5 | RNVC: 2

7 May 1997

5340-14-423-8286
Tubular Fairlead

144238286
981-1-23-009: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-14-362-7572
Mending Plate

143627572
596-52-03-3: RNCC: 3 | RNVC: 2

19 Mar 1980

5340-14-440-4282
Plate Spacer

144404282
6717-14: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-375-9564
Access Cover

143759564
NO PRIMARY REF14-375-9564: RNCC: 3 | RNVC: 2
404110668: RNCC: 5 | RNVC: 2
404110668: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-472-7621
Plug Button

144727621
332A72-2547-00: RNCC: 3 | RNVC: 2

9 Nov 1994

5340-14-454-6999
Access Cover

144546999
2085-06-027: RNCC: 3 | RNVC: 2
89411735: RNCC: 5 | RNVC: 9

9 Apr 1992

5340-14-329-5617
Loop Clamp

143295617
NO PRIMARY REF14-329-5617: RNCC: 3 | RNVC: 2
137066: RNCC: 5 | RNVC: 9
C137066: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-356-8453
Doorknob

143568453
790038-00: RNCC: 3 | RNVC: 2
790038: RNCC: 5 | RNVC: 2
SOG790038-00: RNCC: 5 | RNVC: 9
85-689-9490: RNCC: 6 | RNVC: 9

15 May 1979

5340-14-339-2745
Loop Clamp

143392745
99048574: RNCC: 3 | RNVC: 2
01200009010: RNCC: 3 | RNVC: 2
CN14: RNCC: 5 | RNVC: 2
99048574: RNCC: 5 | RNVC: 2
120009: RNCC: 5 | RNVC: 2
120009-10: RNCC: 5 | RNVC: 2
3597470003480: RNCC: 5 | RNVC: 2
99048574: RNCC: 5 | RNVC: 9

18 Jan 1977

5340-14-385-2305
Access Cover

143852305
IF033-011: RNCC: 3 | RNVC: 9

26 Jul 1983

5340-14-396-8292
Loop Clamp

143968292
15363-07: RNCC: 3 | RNVC: 2
15363-07: RNCC: 5 | RNVC: 9
15363-07: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-366-9779
Webbing Strap

143669779
16299995: RNCC: 1 | RNVC: 2
044U13-599845T: RNCC: 3 | RNVC: 2
0599845T00: RNCC: 5 | RNVC: 2
16299995: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-390-1496
Angle Bracket

143901496
366A54-1070-20: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-433-2794
Bridge Clamp

144332794
160H752515-07: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-14-521-1083
Arched Cushion

145211083
MAT169-0027F18DE73: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-14-403-9222
Runner

144039222
NO PRIMARY REF14-403-9222: RNCC: 3 | RNVC: 2
P4H017638-00: RNCC: 5 | RNVC: 9

11 Sep 1985

5340-14-464-7550
Mounting Plate

144647550
330A68-9075-00: RNCC: 3 | RNVC: 2

1 Sep 1993

5340-14-416-2060
Mounting Plate

144162060
0308857090: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-510-7514
Mounting Plate

145107514
1053877E02: RNCC: 3 | RNVC: 2

10 Nov 1998

5340-14-347-3885
Retaining Strap

143473885
ST400S60P94: RNCC: 3 | RNVC: 2

1 Mar 1978

5340-14-296-6286
Rim Lock

142966286
450BL: RNCC: 3 | RNVC: 2
450BL: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-394-9762
Access Cover

143949762
20321479: RNCC: 3 | RNVC: 2
20321479: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-422-8540
Rod End Clevis

144228540
970269P03: RNCC: 3 | RNVC: 2
970269P03: RNCC: 5 | RNVC: 9

22 Mar 1988

5340-14-344-2004
Access Cover

143442004
201739: RNCC: 3 | RNVC: 2

10 Aug 1977

5340-14-313-6922
Rod End Clevis

143136922
140C225: RNCC: 3 | RNVC: 9

1 Jan 1974

5340-14-540-8247
Access Cover

145408247
X1568281: RNCC: 3 | RNVC: 2

23 Apr 2004

5340-14-503-9514
Mounting Plate

145039514
43305: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-14-537-4147
Access Cover

145374147
29490920: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-533-5138
Access Cover

145335138
20392863: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-501-6711
Access Cover

145016711
46232127: RNCC: 3 | RNVC: 2
46232127: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-418-9155
Rod End Clevis

144189155
DA1D794242001: RNCC: 3 | RNVC: 2

16 Sep 1987

5340-14-535-2677
Utility Access Door

145352677
DE1E291220A1: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-535-1938
Loop Clamp

145351938
5000498285: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-284-5723
Access Cover

142845723
0226550190: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-517-6107
Access Cover

145176107
F1302396: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-410-6863
Access Cover

144106863
247745: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-423-3644
Rod End Clevis

144233644
160G202404-18: RNCC: 3 | RNVC: 2

14 Apr 1988

5340-14-523-9815
Access Cover

145239815
F1395448: RNCC: 3 | RNVC: 2

14 Feb 2001

5340-14-536-1001
Access Cover

145361001
803228555013: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-460-4350
Plug Button

144604350
PL1BV6020A100009A: RNCC: 3 | RNVC: 2

26 Jan 1993

5340-14-358-2523
Access Cover

143582523
12320-369-690: RNCC: 3 | RNVC: 2
12320-369-690: RNCC: 5 | RNVC: 2

13 Aug 1979

5340-14-449-6466
Support Hook

144496466
1217222P003: RNCC: 3 | RNVC: 2

28 Aug 1991

5340-14-480-9470
Mounting Bracket

144809470
5010114067: RNCC: 3 | RNVC: 2

11 Apr 1996

5340-14-417-0847
Cushioning Pad

144170847
534595: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-14-544-2871
Mounting Bracket

145442871
S931A1150102: RNCC: 3 | RNVC: 2

17 Jan 2005

5340-14-547-5238
Pipe Hanger

145475238
RA1M704764891N1: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-405-1724
Access Cover

144051724
355412: RNCC: 3 | RNVC: 2
355412: RNCC: 5 | RNVC: 9

27 Nov 1985

5340-14-434-3612
Blank Panel

144343612
39232401: RNCC: 3 | RNVC: 2
39232401: RNCC: 5 | RNVC: 9

20 Sep 1989

5340-14-367-4025
Mending Plate

143674025
15454417: RNCC: 3 | RNVC: 2
15454417: RNCC: 5 | RNVC: 2
15454417: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-446-4253
Turnbuckle Body

144464253
5000719001: RNCC: 3 | RNVC: 2

19 Mar 1991

5340-14-532-5150
Handle Grip

145325150
247314: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-14-553-3585
Mounting Bracket

145533585
M5221123800000: RNCC: 3 | RNVC: 2
M5221123800000: RNCC: 5 | RNVC: 2

28 Mar 2007

5340-14-474-8092
Angle Bracket

144748092
29779763: RNCC: 3 | RNVC: 9

1 Mar 1995

5340-14-528-4028
Expansion Shield

145284028
50604430: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-14-430-5742
Cover Strip

144305742
PM1A227000012: RNCC: 3 | RNVC: 2
PM1A227000012: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-541-4638
Padlock Eye

145414638
1SH41771359: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-270-9151
Loop Clamp

142709151
201172: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-472-2878
Self-Locking Insert

144722878
TSNGL00522B: RNCC: 3 | RNVC: 2

17 Oct 1994

5340-14-395-0594
Angle Bracket

143950594
724625: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-552-8176
Tie Down Adapter

145528176
82187775000: RNCC: 3 | RNVC: 2
82360330: RNCC: 5 | RNVC: 2

5 Feb 2007

5340-14-468-3957
Access Cover

144683957
167583: RNCC: 3 | RNVC: 2
89170269: RNCC: 5 | RNVC: 2

23 Feb 1994

5340-14-523-2409
Retaining Strap

145232409
RA1M701326307: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-551-5019
Angle Bracket

145515019
RA1B701666824: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-539-9670
Angle Bracket

145399670
RA1B701390361N1: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-453-2846
Angle Bracket

144532846
12252: RNCC: 3 | RNVC: 2
91719891: RNCC: 5 | RNVC: 2

12 Feb 1992

5340-14-426-6238
Threaded Rod End

144266238
26145024400: RNCC: 3 | RNVC: 2
261450244: RNCC: 5 | RNVC: 9
440429: RNCC: 5 | RNVC: 9

10 Sep 1988

5340-14-418-8647
Butt Hinge

144188647
DA1D292145400: RNCC: 3 | RNVC: 2

16 Sep 1987

5340-14-349-3740
Anchor Strap

143493740
22356847: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-457-9975
Access Cover

144579975
016697CTH20R1: RNCC: 3 | RNVC: 2

2 Oct 1992

5340-14-457-8461
Loop Clamp

144578461
NSA5516-10NV: RNCC: 3 | RNVC: 2
NSA5516-10NV: RNCC: 3 | RNVC: 2
NSA5516-10-NV: RNCC: 5 | RNVC: 2

24 Sep 1992

5340-14-553-3126
Retaining Band

145533126
365A53-1369-20: RNCC: 3 | RNVC: 2

22 Mar 2007

5340-14-461-2496
Loop Clamp

144612496
BC100A130-107: RNCC: 3 | RNVC: 9
0222005M00: RNCC: 5 | RNVC: 2

3 Mar 1993

5340-14-303-8334
Control Rod

143038334
NO PRIMARY REF14-303-8334: RNCC: 3 | RNVC: 2
19-120-120DETK: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-441-2142
Mounting Bracket

144412142
332A93-3306-27: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-530-3619
Mounting Plate

145303619
160-888071-03: RNCC: 3 | RNVC: 2

5 Jun 2002

5340-14-340-3639
Pipe Hanger

143403639
M3E701-430: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-470-7145
Mounting Bracket

144707145
365A61-8023-04: RNCC: 3 | RNVC: 2

29 Jun 1994

5340-14-554-8675
Utility Access Door

145548675
434-07: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-526-9752
Rod End Clevis

145269752
ST159-2M681-2R701: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-398-6431
Webbing Strap

143986431
E150-4M: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-456-6810
Swivel Caster

144566810
SP4BR100-23L: RNCC: 3 | RNVC: 2
ST89128002: RNCC: 3 | RNVC: 2
1035462A00: RNCC: 5 | RNVC: 2

22 Jul 1992

5340-14-475-9351
Mounting Bracket

144759351
0301042710: RNCC: 3 | RNVC: 2
85-695-4650: RNCC: 6 | RNVC: 9

10 May 1995

5340-14-416-5776
Mounting Bracket

144165776
0249961100: RNCC: 3 | RNVC: 2
85-693-3700: RNCC: 6 | RNVC: 9

18 Jun 1987

5340-14-432-3096
Mounting Plate

144323096
4132-211A565: RNCC: 3 | RNVC: 2
0068673K00: RNCC: 5 | RNVC: 2
4132-211A565: RNCC: 5 | RNVC: 9

2 Jun 1989

5340-14-511-4192
Loop Clamp

145114192
NO PRIMARY REF14-511-4192: RNCC: 3 | RNVC: 2
H6: RNCC: 5 | RNVC: 9
5340AA2049782: RNCC: 6 | RNVC: 9

16 Dec 1998

5340-14-389-4576
Mending Plate

143894576
365A55-3111-02: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-389-3668
Mending Plate

143893668
341A65-7641-20: RNCC: 3 | RNVC: 2

19 Dec 1983

5340-14-415-6027
Swivel Caster

144156027
HP1BD100-23R01: RNCC: 3 | RNVC: 2
0236352P00: RNCC: 5 | RNVC: 2

18 May 1987

5340-14-373-9984
Anchor Strap

143739984
7380-272: RNCC: 3 | RNVC: 9

8 Dec 1981

5340-14-519-4136
Access Cover

145194136
332A61-4713-20: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-404-9414
Access Cover

144049414
955120-315CPV: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-440-3988
Access Cover

144403988
417501160000: RNCC: 3 | RNVC: 2
4175-0116-0000: RNCC: 5 | RNVC: 2

11 Jul 1990

5340-14-553-9160
Swivel Caster

145539160
EP6LA250-63: RNCC: 3 | RNVC: 2

30 May 2007

5340-14-480-0239
Mounting Bracket

144800239
80-5005-026: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-302-4840
Access Cover

143024840
3130S95-51-030: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-306-2976
Rim Lock

143062976
AZ861-9E: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-531-2339
Access Cover

145312339
955120-324CPV: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-485-3657
Mounting Bracket

144853657
NO PRIMARY REF14-485-3657: RNCC: 3 | RNVC: 2
RAB9734: RNCC: 5 | RNVC: 2
100100: RNCC: 5 | RNVC: 9

20 Jan 1997

5340-14-297-4353
Loop Clamp

142974353
NO PRIMARY REF14-297-4353: RNCC: 3 | RNVC: 2
17-600-16: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-395-1959
Mounting Plate

143951959
242435: RNCC: 3 | RNVC: 2
85-692-5417: RNCC: 6 | RNVC: 9

2 Oct 1984

5340-14-448-8547
Cable Retractor

144488547
NO PRIMARY REF14-448-8547: RNCC: 3 | RNVC: 2
02002399: RNCC: 5 | RNVC: 9

23 Jul 1991

5340-14-429-2649
Retaining Clip

144292649
PEC302-001-426: RNCC: 3 | RNVC: 2
PEC-302-001-426: RNCC: 5 | RNVC: 2

11 Jan 1989

5340-14-301-4480
Butt Hinge

143014480
P26-306-160X60DR0ULEEAC: RNCC: 2 | RNVC: 2

1 Jan 1973

5340-14-438-0410
Mounting Bracket

144380410
3262790603: RNCC: 3 | RNVC: 2
70001431: RNCC: 3 | RNVC: 2
C579035: RNCC: 3 | RNVC: 2
26279060: RNCC: 3 | RNVC: 2
26279060: RNCC: 5 | RNVC: 9
3262790603: RNCC: 5 | RNVC: 9
70001431: RNCC: 5 | RNVC: 9

7 Mar 1990

5340-14-550-4693
Angle Bracket

145504693
RA1B701716111: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-351-1237
Webbing Strap

143511237
120110: RNCC: 3 | RNVC: 2
MAF0001003786: RNCC: 6 | RNVC: 9

10 Aug 1978

5340-14-413-9970
Rigid Caster

144139970
13-203-82: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-548-1600
Mounting Bracket

145481600
5430127703: RNCC: 3 | RNVC: 2

13 Dec 2005

5340-14-212-0422
Detent Plunger

142120422
28015178-0: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-442-6591
Mounting Bracket

144426591
TB3050202: RNCC: 3 | RNVC: 2
70766: RNCC: 5 | RNVC: 9

24 Oct 1990

5340-14-306-0607
Cushioning Pad

143060607
032A041: RNCC: 3 | RNVC: 2
032A041: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-507-6317
Mounting Bracket

145076317
5010118590: RNCC: 3 | RNVC: 2

30 Jul 1998

5340-14-392-4411
Leaf Spring

143924411
B2A000080: RNCC: 3 | RNVC: 9

21 Mar 1984

5340-14-515-4040
Mounting Bracket

145154040
20512127A: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-446-3843
Switch Handle

144463843
ZZ2072: RNCC: 3 | RNVC: 2

18 Mar 1991

5340-14-532-0665
Mounting Bracket

145320665
03-702-755: RNCC: 3 | RNVC: 2
SZ03.702.755: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-339-0236
Corner Brace

143390236
33112: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-533-4981
Angle Bracket

145334981
29002217: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-489-5403
Blank Panel

144895403
45571769: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-14-511-6118
Pipe Hanger

145116118
RA1M122141530: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-226-8667
Lock-Release Lever

142268667
226542: RNCC: 3 | RNVC: 2
SOG226542: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-042-4737
Angle Bracket

140424737
16317711: RNCC: 3 | RNVC: 2
16317711: RNCC: 5 | RNVC: 2
16317711: RNCC: 5 | RNVC: 9

19 Jan 1978

5340-14-338-6176
Runner

143386176
0555612500: RNCC: 3 | RNVC: 2
0555612500: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-526-9649
Mounting Bracket

145269649
10620433: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-376-6669
Butt Hinge

143766669
460116B: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-490-6178
Door Handle

144906178
10537306: RNCC: 3 | RNVC: 2

6 Oct 1997

5340-14-362-9517
Mending Plate

143629517
326455: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-14-545-8686
Section Block Clamp

145458686
RA1M703754143A1: RNCC: 3 | RNVC: 2

23 May 2005

5340-14-348-3520
Loop Clamp

143483520
PF12A3CN07: RNCC: 3 | RNVC: 2
Y12A3CN07: RNCC: 5 | RNVC: 9
PF12A3CN7: RNCC: 5 | RNVC: 9
PF12A3NC7: RNCC: 5 | RNVC: 9

29 Mar 1978

5340-14-522-5115
Access Cover

145225115
015020000601: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-14-549-8492
Angle Bracket

145498492
2092791: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-552-8779
Access Cover

145528779
82036597000: RNCC: 3 | RNVC: 2

10 Feb 2007

5340-14-528-4023
Mounting Bracket

145284023
50604424: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-14-548-4908
Mounting Bracket

145484908
5010604624: RNCC: 3 | RNVC: 2

23 Jan 2006

5340-14-497-8821
Access Cover

144978821
ZT4802: RNCC: 3 | RNVC: 2

22 Oct 1997

5340-14-463-7172
Leakproof Seal Plug

144637172
200797: RNCC: 3 | RNVC: 2
89170580: RNCC: 5 | RNVC: 2

23 Jun 1993

5340-14-458-8800
Mounting Plate

144588800
46060679: RNCC: 3 | RNVC: 2
46060679: RNCC: 5 | RNVC: 9

5 Nov 1992

5340-14-522-1630
Access Cover

145221630
1CN10211B001S: RNCC: 3 | RNVC: 2

5 Oct 2000

5340-14-380-0747
Access Cover

143800747
71036: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-409-3590
Rod End Clevis

144093590
73162: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-465-8845
Mounting Plate

144658845
5230319: RNCC: 3 | RNVC: 2

14 Oct 1993

5340-14-465-8831
Mounting Plate

144658831
5220401: RNCC: 3 | RNVC: 2

14 Oct 1993

5340-14-488-5052
Blank Panel

144885052
K5620339AA1V: RNCC: 3 | RNVC: 2
K5620339AA1V: RNCC: 5 | RNVC: 2

14 May 1997

5340-14-375-2533
Angle Bracket

143752533
73-115-016: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-318-8049
Runner

143188049
01204-28-8-11-2-9: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-497-4789
Blank Panel

144974789
E20-1062: RNCC: 3 | RNVC: 2
F300 0T 023 2437: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-482-9208
Pipe Hanger

144829208
78732-020-035: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-467-2848
Mounting Bracket

144672848
S50-201: RNCC: 3 | RNVC: 2
F300 0T 017 0834: RNCC: 5 | RNVC: 9
S50-201: RNCC: 5 | RNVC: 9

3 Jan 1994

5340-14-464-9526
Angle Bracket

144649526
365A21-5058-21: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-517-0431
Mounting Bracket

145170431
309-124-202-0: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-387-0976
Control Rod

143870976
0010121337A300: RNCC: 3 | RNVC: 2
1-300-121: RNCC: 3 | RNVC: 9

24 Aug 1983

5340-14-325-6659
Access Cover

143256659
050A57-520649P: RNCC: 3 | RNVC: 2
0520649P00: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-529-6788
Loop Clamp

145296788
4F2-10010-000: RNCC: 3 | RNVC: 2

4 Apr 2002

5340-14-464-8905
Loop Clamp

144648905
PE49011-4A: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-414-7415
Angle Bracket

144147415
16323665: RNCC: 3 | RNVC: 2
16323665: RNCC: 5 | RNVC: 9

26 Feb 1987

5340-14-500-9442
Mounting Bracket

145009442
C68505100000: RNCC: 3 | RNVC: 2
F300 0T 024 9654: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-487-5145
Cover Strip

144875145
RA1M525910113: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-500-6398
Mounting Plate

145006398
E64009998008: RNCC: 3 | RNVC: 2
F300 0T 024 6584: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-531-3813
Loop Clamp

145313813
51300005078: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-14-482-1148
Angle Bracket

144821148
BB2532: RNCC: 3 | RNVC: 2

20 Jun 1996

5340-14-542-7055
Retaining Strap

145427055
71 325: RNCC: 3 | RNVC: 2

28 Jul 2004

5340-14-450-1712
Mounting Bracket

144501712
92PD260126: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-555-4108
Loop Clamp

145554108
78651RH4AF: RNCC: 1 | RNVC: 2
78651RH4AF: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-14-462-6649
Retaining Strap

144626649
73304: RNCC: 3 | RNVC: 2
108450: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-477-0737
Loop Clamp

144770737
71113105070: RNCC: 3 | RNVC: 2
165G70: RNCC: 5 | RNVC: 2
91683885: RNCC: 5 | RNVC: 2
HB165G70: RNCC: 5 | RNVC: 9

19 Jul 1995

5340-14-550-9195
Angle Bracket

145509195
RA1B702502161: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-444-2090
Wiring Harness

144442090
A11A822210220A2: RNCC: 3 | RNVC: 2

18 Dec 1990

5340-14-401-3340
Mounting Plate

144013340
2500495: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-437-2544
Retaining Strap

144372544
A10771: RNCC: 3 | RNVC: 2

24 Jan 1990

5340-14-543-6559
Mounting Bracket

145436559
AMPC GENE E223201: RNCC: 3 | RNVC: 2

1 Dec 2004

5340-14-382-5613
Angle Bracket

143825613
16497263: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-438-1929
Cover Strip

144381929
PM1A121212105: RNCC: 3 | RNVC: 2
PM1A121212105: RNCC: 5 | RNVC: 2

7 Mar 1990

5340-14-461-2940
Angle Bracket

144612940
5000749179: RNCC: 3 | RNVC: 2
89287833: RNCC: 5 | RNVC: 2

3 Mar 1993

5340-14-520-5927
Mounting Plate

145205927
32117181121: RNCC: 3 | RNVC: 2
SDM32117181121: RNCC: 5 | RNVC: 9

24 May 2000

5340-14-204-2239
Loop Clamp

142042239
MT32GN: RNCC: 3 | RNVC: 2
MT32GN: RNCC: 5 | RNVC: 9
MT32GN: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-14-278-4501
Webbing Strap

142784501
12505328: RNCC: 3 | RNVC: 2
12505328: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-509-0864
Synchro Clamp

145090864
15152291: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-341-8143
Angle Bracket

143418143
311158: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-434-0826
Bumper

144340826
0870264K00: RNCC: 3 | RNVC: 2

5 Sep 1989

5340-14-508-7310
Access Cover

145087310
408678: RNCC: 3 | RNVC: 2
408678: RNCC: 5 | RNVC: 2
408678: RNCC: 5 | RNVC: 9

29 Sep 1998

5340-14-504-0069
Access Cover

145040069
00132300: RNCC: 3 | RNVC: 2
00132300: RNCC: 5 | RNVC: 9

4 Feb 1998

5340-14-459-3776
Section Block Clamp

144593776
16787420: RNCC: 3 | RNVC: 2
16787420: RNCC: 5 | RNVC: 9

26 Nov 1992

5340-14-534-7065
Access Cover

145347065
10472226: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-360-1875
Block Clamp

143601875
A11A704106020: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-031-1649
Access Cover

140311649
VDP4302: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-504-6285
Mounting Plate

145046285
F00201932: RNCC: 3 | RNVC: 2
F00144224: RNCC: 5 | RNVC: 9
F00201932: RNCC: 5 | RNVC: 9

25 Feb 1998

5340-14-551-2859
Mounting Bracket

145512859
RA1B703246527A2: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-378-9948
Access Cover

143789948
16909528: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-497-9011
Angle Bracket

144979011
0315777200: RNCC: 3 | RNVC: 2

22 Oct 1997

5340-14-508-5356
Access Cover

145085356
FH152009011: RNCC: 3 | RNVC: 2
FH152009001: RNCC: 3 | RNVC: 9

16 Sep 1998

5340-14-420-9849
Loop Clamp

144209849
RSGU1-54/20: RNCC: 3 | RNVC: 2
RSGU1-54-20: RNCC: 5 | RNVC: 2
RSGU1100-54-20: RNCC: 5 | RNVC: 2
RSGU1100-54-20: RNCC: 5 | RNVC: 2
RSGU1100-54/20: RNCC: 5 | RNVC: 2

6 Jan 1988

5340-14-402-6380
Loop Clamp

144026380
6AG28DP30: RNCC: 3 | RNVC: 2
0611-2200: RNCC: 3 | RNVC: 2
614125: RNCC: 5 | RNVC: 2
240202806: RNCC: 5 | RNVC: 2
0611-22: RNCC: 5 | RNVC: 2
4-022026: RNCC: 5 | RNVC: 2
4125-4700: RNCC: 5 | RNVC: 2
F300 0T 024 9420: RNCC: 6 | RNVC: 9

19 Jul 1985

Load More Results