What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 57 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 57 of 446

5340-14-551-3486
Angle Bracket

145513486
RA1M702606079A1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-388-4509
Angle Bracket

143884509
01502855700: RNCC: 3 | RNVC: 2
015028557: RNCC: 5 | RNVC: 2
55K415: RNCC: 5 | RNVC: 9

3 Nov 1983

5340-14-532-3793
Pipe Hanger

145323793
RA1M703576211N1: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-507-6447
Access Cover

145076447
96183037: RNCC: 3 | RNVC: 2

7 Aug 1998

5340-14-350-5172
Eye Hook

143505172
7350: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-393-5500
Bow Handle

143935500
970198: RNCC: 3 | RNVC: 2
970198: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-14-518-4966
Access Cover

145184966
633B1812: RNCC: 3 | RNVC: 9

9 Feb 2000

5340-14-277-3708
Access Cover

142773708
0211527000: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-465-6603
Angle Bracket

144656603
C69352: RNCC: 3 | RNVC: 2

6 Oct 1993

5340-14-298-3352
Rod End Clevis

142983352
174003: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-468-3646
Access Cover

144683646
1020310N01: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-14-366-7912
Access Cover

143667912
969311: RNCC: 3 | RNVC: 2
969311: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-454-6769
Access Cover

144546769
305807: RNCC: 3 | RNVC: 2
305807: RNCC: 5 | RNVC: 9

9 Apr 1992

5340-14-555-8405
Access Cover

145558405
62000380AA: RNCC: 3 | RNVC: 2

18 Dec 2007

5340-14-338-6197
Access Cover

143386197
0607720000: RNCC: 3 | RNVC: 2
0607720000: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-341-5598
Access Cover

143415598
0064637040: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-293-2711
Access Cover

142932711
3971N3: RNCC: 3 | RNVC: 2
RTM3971N3: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-366-9348
Access Cover

143669348
003277080P: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-414-5446
Access Cover

144145446
TH20B2303: RNCC: 3 | RNVC: 2

11 Feb 1987

5340-14-505-8391
Detent Plunger

145058391
4500-6VK: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-413-1410
Quick Release Pin

144131410
1699608M91: RNCC: 3 | RNVC: 2
1699608M91: RNCC: 5 | RNVC: 9

26 Nov 1986

5340-14-311-1011
Handwheel

143111011
22549-4: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-527-9659
Mounting Bracket

145279659
T632A2315301: RNCC: 3 | RNVC: 2

5 Dec 2001

5340-14-523-2201
Turnbuckle Body

145232201
RA1M216400801A3: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-527-9657
Mounting Bracket

145279657
T632A2313301: RNCC: 3 | RNVC: 2

5 Dec 2001

5340-14-533-1252
Angle Bracket Set

145331252
31103269: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-14-484-2534
Mounting Bracket

144842534
501-729-740-0: RNCC: 3 | RNVC: 2

31 Oct 1996

5340-14-466-1689
Angle Bracket

144661689
166089: RNCC: 3 | RNVC: 2
89170191: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-516-6413
Mounting Plate

145166413
14070: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-14-550-1853
Runner

145501853
7063.500: RNCC: 3 | RNVC: 2
61773704AA: RNCC: 5 | RNVC: 2
AA018526: RNCC: 6 | RNVC: 9

7 Jun 2006

5340-14-555-4121
Loop Clamp

145554121
78651DH40BS: RNCC: 1 | RNVC: 2
78651DH40BS: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-14-354-2223
Quick Release Pin

143542223
14A1115: RNCC: 3 | RNVC: 2

30 Jan 1979

5340-14-537-8565
Mounting Plate

145378565
231031: RNCC: 3 | RNVC: 2
201031: RNCC: 3 | RNVC: 9

1 Dec 2003

5340-14-479-5134
Mounting Bracket

144795134
23626978-9: RNCC: 3 | RNVC: 2

17 Jan 1996

5340-14-552-6204
Access Cover

145526204
GENE E 290011A: RNCC: 3 | RNVC: 2

18 Jan 2007

5340-14-520-2888
Bumper

145202888
1339: RNCC: 3 | RNVC: 2
91474820: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-554-0552
Mounting Plate

145540552
483 075: RNCC: 3 | RNVC: 2
483 075: RNCC: 3 | RNVC: 2

8 Jun 2007

5340-14-446-6710
Buckle

144466710
3-5N: RNCC: 3 | RNVC: 2

9 Apr 1991

5340-14-454-6773
Webbing Strap

144546773
395342: RNCC: 3 | RNVC: 2
395342: RNCC: 5 | RNVC: 9

9 Apr 1992

5340-14-408-5277
Angle Bracket

144085277
23115549-8: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-522-9581
Access Cover

145229581
ST159-2M561P12: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-14-244-5375
Loop Clamp

142445375
NO PRIMARY REF14-244-5375: RNCC: 3 | RNVC: 2
128: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-495-4286
Mounting Plate

144954286
M46301-18: RNCC: 3 | RNVC: 2
F300 0T 019 2498: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-322-7067
Angle Bracket

143227067
466-11A3P46: RNCC: 3 | RNVC: 2
466-11A3P46: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-477-1125
Access Cover

144771125
BC100A271-102: RNCC: 3 | RNVC: 9
1082472E00: RNCC: 5 | RNVC: 2

26 Jul 1995

5340-14-524-6346
Mounting Bracket

145246346
365A87-3012-11: RNCC: 3 | RNVC: 2

29 Mar 2001

5340-14-464-9572
Cover Strip

144649572
365A25-0521-2001: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-449-1069
Mounting Plate

144491069
81011-29: RNCC: 3 | RNVC: 2

29 Jul 1991

5340-14-397-4219
Rod End Connector

143974219
306-2R8CDBI: RNCC: 3 | RNVC: 2
9950934000: RNCC: 5 | RNVC: 2
129APFR8CADMIEBICHROMATE: RNCC: 5 | RNVC: 2
129APFR8CDBI: RNCC: 5 | RNVC: 2

14 Dec 1984

5340-14-380-9725
Handwheel

143809725
GSM137-007F43AVI0RB: RNCC: 3 | RNVC: 2
MAT137-004F7AVIORB: RNCC: 3 | RNVC: 2

14 Dec 1982

5340-14-410-6309
Anchor Strap

144106309
415257: RNCC: 3 | RNVC: 2
GE5169-30-03: RNCC: 5 | RNVC: 2

9 Jul 1986

5340-14-282-4944
Retaining Strap

142824944
M208-250-33: RNCC: 3 | RNVC: 2
M208-25033: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-370-1962
Mounting Bracket

143701962
366A61-3428-00: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-365-2627
Lock-Release Lever

143652627
366A75-3060-00: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-247-5189
Runner

142475189
253-5M162P59G: RNCC: 3 | RNVC: 9
PA253-5M162P59G: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-478-6191
Mounting Plate

144786191
160-746252-14: RNCC: 3 | RNVC: 2

8 Nov 1995

5340-14-449-3608
Block Clamp

144493608
R4A717-30: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-549-6821
Bumper

145496821
MC201-255142-30: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-14-041-2521
Mounting Bracket

140412521
A7304-60: RNCC: 3 | RNVC: 9

1 Jan 1974

5340-14-458-5098
Retaining Strap

144585098
6270-02947: RNCC: 3 | RNVC: 2

23 Oct 1992

5340-14-473-8581
Section Block Clamp

144738581
332A76-1207-00: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-319-4554
Threaded Rod End

143194554
3130S99-85-001: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-438-7113
Bumper

144387113
213B66C: RNCC: 3 | RNVC: 2
85-693-3704: RNCC: 6 | RNVC: 9

2 Apr 1990

5340-14-473-6704
Mounting Plate

144736704
332A67-3255-00: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-427-9117
Webbing Strap

144279117
9Y5L5L1500700B: RNCC: 3 | RNVC: 2
512L2L150500C: RNCC: 5 | RNVC: 9
171731-150700: RNCC: 5 | RNVC: 9

22 Nov 1988

5340-14-513-4657
Bumper

145134657
332A22-0110-AZ: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-14-473-8353
Mounting Bracket

144738353
332A61-3171-00: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-500-8485
Access Cover

145008485
E65201100019: RNCC: 3 | RNVC: 2
F300 0T 024 8688: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-301-0574
Loop Clamp

143010574
21S0500501: RNCC: 3 | RNVC: 2
21S0500501: RNCC: 5 | RNVC: 2
21S5-27-8: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-450-1688
Mounting Bracket

144501688
92PD260102: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-226-2541
Mending Plate

142262541
0009030: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-224-2967
Loop Clamp

142242967
202112: RNCC: 3 | RNVC: 2
3046: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-270-9926
Retaining Strap

142709926
12506829: RNCC: 3 | RNVC: 2
12506829: RNCC: 3 | RNVC: 9

1 Jan 1970

5340-14-436-8643
Mounting Plate

144368643
DA2C203643005: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-319-8683
Synchro Clamp

143198683
10080: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-540-6955
Mounting Bracket

145406955
38051735: RNCC: 3 | RNVC: 2
ND078409: RNCC: 5 | RNVC: 2
4848ZG8613180698: RNCC: 6 | RNVC: 9

20 Apr 2004

5340-14-467-2834
Angle Bracket

144672834
CSC200: RNCC: 3 | RNVC: 2
CSC200: RNCC: 5 | RNVC: 2

24 Dec 1993

5340-14-527-6154
Pipe Hanger

145276154
COU001552021120: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-14-528-9955
Angle Bracket

145289955
705280: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-14-349-8439
Loop Clamp

143498439
51200002010: RNCC: 3 | RNVC: 2
10N10: RNCC: 5 | RNVC: 2

14 Jun 1978

5340-14-525-5989
Access Cover

145255989
10 146 400 1410: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-544-8998
Key Holder

145448998
5010213589: RNCC: 3 | RNVC: 2

2 Mar 2005

5340-14-333-2726
Mending Plate

143332726
15166517: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-397-5936
Access Cover

143975936
20195905: RNCC: 3 | RNVC: 2
20195905: RNCC: 5 | RNVC: 9

14 Dec 1984

5340-14-429-8161
Plug Button

144298161
007205010P: RNCC: 3 | RNVC: 2

13 Feb 1989

5340-14-307-0454
Access Cover

143070454
TH20J2147: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-514-5015
Access Cover

145145015
162233018: RNCC: 3 | RNVC: 2
162233018: RNCC: 5 | RNVC: 2

26 May 1999

5340-14-460-5972
Access Cover

144605972
462467AA: RNCC: 3 | RNVC: 2
462467AA: RNCC: 3 | RNVC: 9

4 Feb 1993

5340-14-479-2191
Access Cover

144792191
45488723: RNCC: 3 | RNVC: 2
45488723: RNCC: 5 | RNVC: 2

19 Dec 1995

5340-14-439-5169
Webbing Strap

144395169
006580080P: RNCC: 3 | RNVC: 2

11 May 1990

5340-14-364-7876
Mounting Plate

143647876
16559346: RNCC: 3 | RNVC: 2
16559346: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-256-8127
Access Cover

142568127
0000124984: RNCC: 3 | RNVC: 2
124984: RNCC: 5 | RNVC: 9
0000124984: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-397-8973
Anchor Strap

143978973
171995: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-291-1834
Access Cover

142911834
42313: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-436-7356
Mounting Bracket

144367356
DA2C203900910: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-460-1815
Mounting Bracket

144601815
LN214-001FIA02: RNCC: 3 | RNVC: 2
RAB0239: RNCC: 5 | RNVC: 2

14 Jan 1993

5340-14-217-9146
Cover Strip

142179146
3160S25-25-048: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-230-1733
Loop Clamp

142301733
511119050161: RNCC: 3 | RNVC: 2
35P16: RNCC: 5 | RNVC: 2
A0021-35P16: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-343-5084
Loop Clamp

143435084
202C241-13: RNCC: 3 | RNVC: 9
202C241-13: RNCC: 5 | RNVC: 9
202C241: RNCC: 5 | RNVC: 9
202C241-10: RNCC: 5 | RNVC: 9
202C241-13-0: RNCC: 5 | RNVC: 9
85-800-6602: RNCC: 6 | RNVC: 9

16 Jun 1977

5340-14-360-6735
Anchor Strap

143606735
6413-07061: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-439-8351
Stand Base

144398351
332A58-1411-01: RNCC: 3 | RNVC: 2

23 May 1990

5340-14-510-1099
Access Cover

145101099
F291-12RS2: RNCC: 3 | RNVC: 2
1560AA8007441: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-539-6500
Loop Clamp

145396500
21231187-00: RNCC: 3 | RNVC: 2
21231187-7: RNCC: 5 | RNVC: 2

28 Jan 2004

5340-14-530-9306
Mounting Bracket

145309306
SMC-S-04369-010-0: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-14-473-6676
Mounting Plate

144736676
332A64-2651-01: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-501-8178
Angle Bracket

145018178
307-845-101-0: RNCC: 3 | RNVC: 2

12 Nov 1997

5340-14-563-2338
Utility Resilient Mount

145632338
17520000: RNCC: 3 | RNVC: 2
CB1700-15: RNCC: 5 | RNVC: 2

15 Jan 2010

5340-14-524-0351
Rim Lock

145240351
E3-14-25: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-14-422-1560
Angle Bracket

144221560
341A94-3101-20: RNCC: 3 | RNVC: 2

24 Feb 1988

5340-14-319-4586
Retaining Strap

143194586
3130S73-86-333: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-408-9937
Loop Clamp

144089937
SPV430PA-DPAS: RNCC: 3 | RNVC: 2

9 Apr 1986

5340-14-394-7225
Rim Lock Set

143947225
NO PRIMARY REF14-394-7225: RNCC: 3 | RNVC: 2
6600-04FE010: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-524-2011
Mounting Bracket

145242011
ST159-2M756P178: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-318-3256
Angle Bracket

143183256
CV15-300563-4: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-347-3276
Angle Bracket

143473276
330A58-3601-20: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-14-518-2573
Protection Bellows

145182573
312-11137-001: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-14-501-7841
Clamping Catch

145017841
NO PRIMARY REF14-501-7841: RNCC: 3 | RNVC: 2
301 002 591: RNCC: 5 | RNVC: 9
301 002 601: RNCC: 5 | RNVC: 9
F300 0T 000 2182: RNCC: 6 | RNVC: 9

10 Nov 1997

5340-14-423-6872
Angle Bracket

144236872
13-201-145-01: RNCC: 3 | RNVC: 2

27 Apr 1988

5340-14-392-3287
Swivel Caster

143923287
218400359: RNCC: 3 | RNVC: 9
85-691-7631: RNCC: 6 | RNVC: 9

21 Mar 1984

5340-14-372-4920
Rod End Clevis

143724920
B0188-009F15: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-218-1355
Handle Grip

142181355
5251-20-07: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-521-2263
Access Cover

145212263
444-01672-100: RNCC: 3 | RNVC: 2
444-01672-100: RNCC: 3 | RNVC: 2
444-01672-100: RNCC: 5 | RNVC: 2
444-01672-100: RNCC: 5 | RNVC: 2

12 Jul 2000

5340-14-458-7102
Cable Retractor

144587102
0009933673: RNCC: 3 | RNVC: 2
85-694-9084: RNCC: 6 | RNVC: 9

29 Oct 1992

5340-14-343-6445
Loop Clamp

143436445
ASNA0021-21G14: RNCC: 1 | RNVC: 2
51313105014: RNCC: 3 | RNVC: 2
A0021-21G14: RNCC: 5 | RNVC: 2
ASNA0021-21G14: RNCC: 5 | RNVC: 2
213101400: RNCC: 5 | RNVC: 2
21G14: RNCC: 5 | RNVC: 2
A0021-21G14: RNCC: 5 | RNVC: 2

13 Jul 1977

5340-14-375-2278
Bumper

143752278
7085000920: RNCC: 3 | RNVC: 2
3514-08: RNCC: 5 | RNVC: 2

26 Feb 1982

5340-14-502-6550
Mounting Bracket

145026550
243-32620-08: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-569-8713
Coating Plate

145698713
AQ040-012332-01: RNCC: 3 | RNVC: 2

26 Oct 2011

5340-14-482-4207
Pipe Hanger

144824207
78733-025-031: RNCC: 3 | RNVC: 2

11 Jul 1996

5340-14-460-8658
Synchro Clamp

144608658
3207-060: RNCC: 3 | RNVC: 2

10 Feb 1993

5340-14-492-7295
Mounting Plate

144927295
NO PRIMARY REF14-492-7295: RNCC: 3 | RNVC: 2
1211A107: RNCC: 5 | RNVC: 9
F300 0T 008 6814: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-284-2563
Access Cover

142842563
78574-39: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-466-1619
Mounting Bracket

144661619
8509-00-021: RNCC: 3 | RNVC: 2
89297964: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-373-0164
Mending Plate

143730164
4440810190: RNCC: 3 | RNVC: 2
610-0460: RNCC: 5 | RNVC: 2
85-691-6332: RNCC: 6 | RNVC: 9

21 Sep 1981

5340-14-464-8866
Mounting Bracket

144648866
312-10093-001: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-406-3447
Mounting Plate

144063447
79093838: RNCC: 3 | RNVC: 2
79093838: RNCC: 5 | RNVC: 9

8 Jan 1986

5340-14-512-2772
Metal Grille

145122772
201079: RNCC: 3 | RNVC: 2

9 Feb 1999

5340-14-443-2714
Mounting Bracket

144432714
1022140W00: RNCC: 3 | RNVC: 2

14 Nov 1990

5340-14-495-8910
Mounting Bracket

144958910
406125: RNCC: 3 | RNVC: 2
406125: RNCC: 5 | RNVC: 9
F300 0T 020 4425: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-312-1183
Retaining Strap

143121183
169403: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-462-0118
Mounting Bracket

144620118
GA61571: RNCC: 3 | RNVC: 2
GA61571: RNCC: 5 | RNVC: 2

31 Mar 1993

5340-14-377-5389
Angle Bracket

143775389
A21A221176361: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-416-2492
Runner

144162492
8160860: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-484-5530
Mounting Bracket

144845530
T700A7110037000: RNCC: 3 | RNVC: 2

21 Nov 1996

5340-14-515-9647
Mounting Plate

145159647
009734041P: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-14-548-4839
Mounting Bracket

145484839
077212: RNCC: 3 | RNVC: 2

20 Jan 2006

5340-14-548-6939
Handwheel

145486939
SP813320A: RNCC: 3 | RNVC: 2

1 Feb 2006

5340-14-484-5962
Control Rod

144845962
8000083A00: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-518-5243
Metal Grille

145185243
0008056191: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-350-4459
Angle Bracket

143504459
205758: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-358-5500
Retaining Strap

143585500
386435: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-349-3005
Angle Bracket

143493005
128058: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-535-8961
Mounting Plate

145358961
CMPK02: RNCC: 3 | RNVC: 2

27 Jun 2003

5340-14-258-8344
Loop Clamp

142588344
202122: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-304-2543
Mounting Plate

143042543
26246832: RNCC: 3 | RNVC: 2
C246832: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-457-3487
Mounting Bracket

144573487
318108: RNCC: 3 | RNVC: 2
318108: RNCC: 5 | RNVC: 9

27 Aug 1992

5340-14-405-2573
Retaining Strap

144052573
3511 191 13091: RNCC: 3 | RNVC: 2
RAR3450: RNCC: 5 | RNVC: 2

27 Nov 1985

5340-14-530-5527
Mounting Bracket

145305527
4773802170: RNCC: 3 | RNVC: 2

20 Jun 2002

5340-14-349-3532
Webbing Strap

143493532
ST453UM11P55: RNCC: 3 | RNVC: 2
ST453M11P55: RNCC: 5 | RNVC: 9
ST453UM11P55: RNCC: 5 | RNVC: 9

22 May 1978

5340-14-508-0838
Webbing Strap

145080838
4773920390: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-487-4904
Mounting Bracket

144874904
123-01-138: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-445-7547
Loop Clamp

144457547
78653-20: RNCC: 3 | RNVC: 2

25 Feb 1991

5340-14-272-5430
Bumper

142725430
511572: RNCC: 3 | RNVC: 2
73-043-928: RNCC: 5 | RNVC: 2
511572A45: RNCC: 5 | RNVC: 2
511572R2: RNCC: 5 | RNVC: 2
0169397Q00: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-474-3237
Blank Panel

144743237
EA5M701-10-870: RNCC: 3 | RNVC: 2

8 Feb 1995

5340-14-341-3261
Retaining Strap

143413261
NO PRIMARY REF14-341-3261: RNCC: 3 | RNVC: 2
16066: RNCC: 5 | RNVC: 9

16 Mar 1977

5340-14-371-4160
Retaining Strap

143714160
7-2-360: RNCC: 3 | RNVC: 2
F7-2-360: RNCC: 5 | RNVC: 2

5 Aug 1981

5340-14-355-8625
Access Cover

143558625
NO PRIMARY REF14-355-8625: RNCC: 3 | RNVC: 2
MD4628: RNCC: 5 | RNVC: 9

5 Apr 1979

5340-14-457-9751
Mounting Bracket

144579751
NO PRIMARY REF14-457-9751: RNCC: 3 | RNVC: 2
91332453: RNCC: 5 | RNVC: 2
7324: RNCC: 5 | RNVC: 9

2 Oct 1992

5340-14-555-2871
Access Cover

145552871
56951521AA: RNCC: 3 | RNVC: 2

22 Oct 2007

5340-14-388-9669
Retaining Strap

143889669
ST159-2M311-1R701: RNCC: 3 | RNVC: 2
ST159-2M311-1P24: RNCC: 5 | RNVC: 2

29 Nov 1983

5340-14-429-4915
Access Cover

144294915
9010-560-000A: RNCC: 3 | RNVC: 2

25 Jan 1989

5340-14-337-9725
Bumper

143379725
61-2-160: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-549-9635
Loop Clamp

145499635
2092469-001: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-352-6015
Loop Clamp

143526015
51359005014: RNCC: 3 | RNVC: 2
55222-14CA: RNCC: 5 | RNVC: 2
21K14: RNCC: 5 | RNVC: 2

16 Oct 1978

5340-14-366-1962
Loop Clamp

143661962
51215305015: RNCC: 3 | RNVC: 2
A0021-20S15: RNCC: 5 | RNVC: 2
20S15: RNCC: 5 | RNVC: 2
85-689-7940: RNCC: 6 | RNVC: 9

4 Nov 1980

5340-14-473-3437
Section Block Clamp

144733437
F702-29-02: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-484-1740
Angle Bracket

144841740
3B99-170: RNCC: 3 | RNVC: 2

31 Oct 1996

5340-14-361-7879
Swivel Caster

143617879
HP6BA200-23B: RNCC: 3 | RNVC: 2
0204955C00: RNCC: 5 | RNVC: 2
THR200-33B: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-14-475-2525
Mounting Bracket

144752525
332A76-5110-03: RNCC: 3 | RNVC: 2

22 Mar 1995

5340-14-364-5172
Rod End Clevis

143645172
1220232: RNCC: 3 | RNVC: 2
1220-232: RNCC: 5 | RNVC: 2
1220232: RNCC: 5 | RNVC: 9
1220-232: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-537-3757
Mounting Bracket

145373757
1926-400-100A: RNCC: 3 | RNVC: 2

29 Oct 2003

5340-14-468-0054
Section Block Clamp

144680054
FA1F702-58-02: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-14-458-7362
Arched Cushion

144587362
MAT169-0012F21DE87: RNCC: 3 | RNVC: 2

29 Oct 1992

5340-14-389-1478
Butt Hinge

143891478
L794BV00-041: RNCC: 3 | RNVC: 2
L794BV00041: RNCC: 5 | RNVC: 2

29 Nov 1983

5340-14-473-6504
Cover Strip

144736504
332A25-1333-20: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-442-7801
Arched Cushion

144427801
BA30089050-33,7: RNCC: 2 | RNVC: 2

5 Nov 1990

5340-14-492-4962
Mounting Bracket

144924962
NO PRIMARY REF14-492-4962: RNCC: 3 | RNVC: 2
5000743767: RNCC: 5 | RNVC: 9
F300 0T 007 7638: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-368-3866
Webbing Strap

143683866
16299992: RNCC: 1 | RNVC: 2
044U13-599842Q: RNCC: 3 | RNVC: 2
0599842Q00: RNCC: 5 | RNVC: 2
16299992: RNCC: 5 | RNVC: 9

20 Feb 1981

5340-14-298-8286
Strap Fastener Loop

142988286
11405-001: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-369-6333
Webbing Strap

143696333
1464-50-44: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-485-5699
Access Cover

144855699
332A58-0018-1001: RNCC: 3 | RNVC: 2

29 Jan 1997

5340-14-550-0127
Mounting Bracket

145500127
EA6M703-10-794: RNCC: 3 | RNVC: 2

24 May 2006

5340-14-361-0545
Control Rod

143610545
NO PRIMARY REF14-361-0545: RNCC: 3 | RNVC: 2
2977REP6: RNCC: 5 | RNVC: 9

19 Dec 1979

5340-14-423-5147
Door Hook

144235147
NO PRIMARY REF14-423-5147: RNCC: 3 | RNVC: 2
89409994: RNCC: 5 | RNVC: 2
25-6-4E6-20: RNCC: 5 | RNVC: 9

21 Apr 1988

5340-14-338-9083
Threaded Rod End

143389083
CRP20-132: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-322-0284
Mending Plate

143220284
17726-09: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-520-2860
Compression Cup

145202860
PN10-102102: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-418-5164
Engine Plate

144185164
1982-04: RNCC: 3 | RNVC: 9
543614: RNCC: 5 | RNVC: 2
7932564224: RNCC: 5 | RNVC: 9
9401982049: RNCC: 5 | RNVC: 9

26 Aug 1987

5340-14-427-2107
Threaded Rod End

144272107
46AM088-01-0001: RNCC: 3 | RNVC: 2

6 Oct 1988

5340-14-402-7129
Butt Hinge

144027129
4CH11P01: RNCC: 3 | RNVC: 2
2CH28: RNCC: 5 | RNVC: 2
4CH11BR: RNCC: 5 | RNVC: 2
4CH28P01: RNCC: 5 | RNVC: 2
6269-009: RNCC: 5 | RNVC: 2
LH92950-24X5IR: RNCC: 5 | RNVC: 9

19 Jul 1985

5340-14-308-3609
Loop Clamp

143083609
E4M701-55-830: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-403-5914
Angle Bracket

144035914
365A53-1303-00: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-490-0948
Bow Handle

144900948
20808-066: RNCC: 3 | RNVC: 2
91640298: RNCC: 5 | RNVC: 2
91640298: RNCC: 5 | RNVC: 2

10 Sep 1997

5340-14-472-8646
Mounting Bracket

144728646
332A21-1030-7501: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-468-0599
Mounting Plate

144680599
312-15580-002: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-218-5731
Rod End Clevis

142185731
R4A775-40-04: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-260-0607
Lock Bolt

142600607
321A58-0414-10: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-520-4087
Clamping Catch

145204087
6004-U22-PC: RNCC: 3 | RNVC: 2
812243: RNCC: 5 | RNVC: 2

17 May 2000

5340-14-402-7667
Mounting Plate

144027667
9760-44: RNCC: 3 | RNVC: 9

19 Jul 1985

5340-14-502-6490
Loop Clamp

145026490
226-75101-03: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-455-4983
Retaining Band

144554983
J05555-11-0710P002: RNCC: 3 | RNVC: 2

21 May 1992

5340-14-464-9575
Cover Strip

144649575
365A25-0521-2301: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-270-9973
Quick Release Pin

142709973
574-2: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-474-5941
Mounting Bracket

144745941
0322740280: RNCC: 3 | RNVC: 2

22 Feb 1995

5340-14-479-0699
Surface Bolt

144790699
23243470-2: RNCC: 3 | RNVC: 2

13 Dec 1995

5340-14-300-3413
Runner

143003413
15026117: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-345-0638
Mending Plate

143450638
327296: RNCC: 3 | RNVC: 2
20327296-0: RNCC: 5 | RNVC: 2

5 Oct 1977

5340-14-318-3536
Angle Bracket

143183536
26-506516-1: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-352-8321
Loop Clamp

143528321
12331065: RNCC: 3 | RNVC: 2
PF12A3N6-5: RNCC: 5 | RNVC: 2
PF12A3N6-5: RNCC: 5 | RNVC: 9

14 Nov 1978

5340-14-431-4582
Access Cover

144314582
G230173-2: RNCC: 3 | RNVC: 2

19 Apr 1989

5340-14-464-8920
Loop Clamp

144648920
PE27019RI5: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-472-4827
Access Cover

144724827
27108755-7: RNCC: 3 | RNVC: 2

26 Oct 1994

5340-14-404-6378
Angle Bracket

144046378
254085: RNCC: 3 | RNVC: 2
254085: RNCC: 5 | RNVC: 9

20 Nov 1985

5340-14-430-6931
Runner

144306931
PM1A711024430: RNCC: 3 | RNVC: 2
PM1A711024430: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-310-2983
Retaining Strap

143102983
466-7M98P423: RNCC: 3 | RNVC: 2
466-7M98P423: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-519-0091
Loop Clamp

145190091
150SG1108: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-476-8556
Rim Lock

144768556
18506856-2: RNCC: 3 | RNVC: 2

5 Jul 1995

5340-14-512-8412
Mounting Bracket

145128412
217005: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-464-2125
Threaded Rod End

144642125
308: RNCC: 3 | RNVC: 2
18007116011: RNCC: 3 | RNVC: 2

27 Jul 1993

5340-14-394-9944
Loop Clamp

143949944
MS21919DG14: RNCC: 3 | RNVC: 2
16C: RNCC: 5 | RNVC: 2

2 Oct 1984

5340-14-516-8300
Mounting Bracket

145168300
0701600: RNCC: 3 | RNVC: 2
0701600: RNCC: 5 | RNVC: 2

20 Oct 1999

5340-14-549-7678
Angle Bracket

145497678
S521A2051155: RNCC: 3 | RNVC: 2

10 May 2006

5340-14-546-8688
Belt-Strap Keeper

145468688
954094: RNCC: 3 | RNVC: 2
ARZ 954094: RNCC: 5 | RNVC: 2

31 Aug 2005

5340-14-549-8936
Mounting Bracket

145498936
31106677: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-349-5418
Retaining Strap

143495418
704730: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-495-8480
Mounting Plate

144958480
NO PRIMARY REF14-495-8480: RNCC: 3 | RNVC: 2
3W3304: RNCC: 5 | RNVC: 9
F300 0T 020 2373: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-461-2203
Pipe Hanger

144612203
064284-953-949: RNCC: 3 | RNVC: 9
7703079310: RNCC: 5 | RNVC: 2
064284-953949: RNCC: 5 | RNVC: 9
064284953949: RNCC: 5 | RNVC: 9

3 Mar 1993

5340-14-484-8180
Mounting Bracket

144848180
332P65-1244-01: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-544-9626
Loop Clamp

145449626
18000191: RNCC: 3 | RNVC: 2
5340-GT-0000045: RNCC: 5 | RNVC: 9

8 Mar 2005

5340-14-403-8592
Access Cover

144038592
676-81362-00: RNCC: 3 | RNVC: 2

28 Aug 1985

5340-14-345-2265
Loop Clamp

143452265
FB1A701-46-810: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-333-6124
Loop Clamp

143336124
5101-03-00-12: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-522-9072
Mounting Plate

145229072
500-75-00-10: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-14-471-0301
Loop Clamp

144710301
411731: RNCC: 3 | RNVC: 2
411731-001: RNCC: 5 | RNVC: 9

20 Jul 1994

5340-14-418-0029
Retaining Strap

144180029
6350-37: RNCC: 3 | RNVC: 9
9223325080: RNCC: 5 | RNVC: 2
9223325080: RNCC: 5 | RNVC: 9

6 Aug 1987

5340-14-341-0575
Angle Bracket

143410575
3H003187-00: RNCC: 3 | RNVC: 2
3H003187-00: RNCC: 5 | RNVC: 9

16 Mar 1977

5340-14-302-4933
Cover Strip

143024933
3160S25-21-409-51: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-345-5401
Loop Clamp

143455401
552193203101: RNCC: 3 | RNVC: 2
55219-320-31B6DB: RNCC: 5 | RNVC: 2
55219-320B316DB: RNCC: 5 | RNVC: 2
85-666-9620: RNCC: 6 | RNVC: 9

5 Oct 1977

5340-14-477-2335
Handwheel

144772335
AER330121: RNCC: 3 | RNVC: 2
AER330-121: RNCC: 5 | RNVC: 2
AER330.121: RNCC: 5 | RNVC: 2

2 Aug 1995

5340-14-444-9084
Loop Clamp

144449084
BN329-518-F12-273,1: RNCC: 3 | RNVC: 2

28 Jan 1991

5340-14-364-8921
Retaining Strap

143648921
321A60-4618-20: RNCC: 3 | RNVC: 2
85-691-0662: RNCC: 6 | RNVC: 9

2 Sep 1980

5340-14-234-4367
Angle Bracket

142344367
NO PRIMARY REF14-234-4367: RNCC: 3 | RNVC: 2
TB1904EQUERREBASDEJARRETIER: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-389-2168
Mounting Plate

143892168
BSC8PA105-0001: RNCC: 3 | RNVC: 2
85-692-3846: RNCC: 6 | RNVC: 9

29 Nov 1983

5340-14-411-2589
Loop Clamp

144112589
ASNA0021-25SE24: RNCC: 3 | RNVC: 2
A0021-25SE24: RNCC: 5 | RNVC: 2

6 Aug 1986

5340-14-362-0680
Bow Handle

143620680
NO PRIMARY REF14-362-0680: RNCC: 3 | RNVC: 2
104: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-14-389-9455
Surface Bolt

143899455
16-1-3433: RNCC: 3 | RNVC: 2
328716: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-14-299-3313
Loop Clamp

142993313
MY20515-36: RNCC: 3 | RNVC: 2
MY20-515-36: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-368-3567
Quick Release Pin

143683567
90890-06013: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-14-427-6209
Retaining Strap

144276209
B0204-037F27: RNCC: 3 | RNVC: 2

26 Oct 1988

5340-14-335-3193
Retaining Strap

143353193
2355-30-01: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-504-0856
Metal Grille

145040856
CS2-0.000.215: RNCC: 3 | RNVC: 2

5 Feb 1998

5340-14-512-9689
Retaining Strap

145129689
0260123590: RNCC: 3 | RNVC: 2
AX15422: RNCC: 5 | RNVC: 2

24 Feb 1999

5340-14-302-1447
Mending Plate

143021447
A10-22-040-03-0: RNCC: 3 | RNVC: 2
A10-22-040-03-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-347-3167
Angle Bracket

143473167
0210579901: RNCC: 3 | RNVC: 2
0210579901: RNCC: 5 | RNVC: 2

19 Jan 1978

5340-14-361-1163
Quick Release Pin

143611163
51453C14R35NW: RNCC: 3 | RNVC: 2
51453C14R35NW: RNCC: 5 | RNVC: 2
ASNA0023C14R35NW: RNCC: 5 | RNVC: 2
55701C14R35NW: RNCC: 5 | RNVC: 9
51453C14R35NW: RNCC: 5 | RNVC: 9
55701C14R35NW: RNCC: 5 | RNVC: 9
85-691-1888: RNCC: 6 | RNVC: 9

19 Dec 1979

5340-14-552-4733
Block Clamp

145524733
S881A9601242: RNCC: 3 | RNVC: 2

8 Jan 2007

5340-14-512-5056
Kick Door Plate

145125056
JAQUE00382A00: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-358-5908
Quick Release Pin

143585908
BTD16-20-813: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-512-4989
Mounting Bracket

145124989
SUPPO94684A00: RNCC: 3 | RNVC: 2
SUPPO94684X00: RNCC: 5 | RNVC: 9

17 Feb 1999

5340-14-530-3267
Mounting Plate

145303267
152E335-01: RNCC: 3 | RNVC: 2
152E335-01: RNCC: 5 | RNVC: 9

29 May 2002

5340-14-396-1512
Access Cover

143961512
P3H010052-00: RNCC: 3 | RNVC: 2
P3H010052-00: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-380-2878
Butt Hinge

143802878
365A25-3074-01: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-302-5650
Cover Strip

143025650
330A22-2177-21: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-466-3511
Synchro Clamp

144663511
PM1A511320014: RNCC: 3 | RNVC: 2
PM1A511320014: RNCC: 5 | RNVC: 2
85-695-0376: RNCC: 6 | RNVC: 9

3 Nov 1993

5340-14-353-1155
Threaded Rod End

143531155
RC55-123: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-356-6634
Loop Clamp

143566634
EA1M707-48: RNCC: 3 | RNVC: 2

15 May 1979

5340-14-376-5253
Retaining Strap

143765253
NO PRIMARY REF14-376-5253: RNCC: 3 | RNVC: 2
404211300: RNCC: 5 | RNVC: 9
404211300: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-489-4898
Access Cover

144894898
365A21-3286-21: RNCC: 3 | RNVC: 2

23 Jul 1997

5340-14-419-2401
Shelf Bracket

144192401
8923-32: RNCC: 3 | RNVC: 2
9223337580: RNCC: 5 | RNVC: 2
9408923320: RNCC: 5 | RNVC: 2
9223337580: RNCC: 5 | RNVC: 2

16 Oct 1987

5340-14-473-8354
Angle Bracket

144738354
332A61-3274-00: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-309-9825
Swivel Caster

143099825
624-822R0ULEAUX: RNCC: 3 | RNVC: 2
1230-01: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-389-1080
Corner Brace

143891080
366A21-1153-52: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-482-6377
Runner

144826377
ZF05931574: RNCC: 3 | RNVC: 2
8917-51: RNCC: 3 | RNVC: 2
ZF0593157480: RNCC: 5 | RNVC: 2
5931574: RNCC: 5 | RNVC: 2

18 Jul 1996

5340-14-389-8505
Access Cover

143898505
418-10848-000: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-484-8116
Synchro Clamp

144848116
332P61-6247-21: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-482-6965
Bow Handle

144826965
312-18636-001: RNCC: 3 | RNVC: 2

20 Jul 1996

5340-14-478-6574
Mounting Bracket

144786574
312-18641-001: RNCC: 3 | RNVC: 2

10 Nov 1995

5340-14-473-6514
Synchro Clamp

144736514
332A31-2011-20: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-394-7221
Rim Lock Set

143947221
NO PRIMARY REF14-394-7221: RNCC: 3 | RNVC: 2
6600-04FE006: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-365-6703
Buckle

143656703
A2002-16: RNCC: 3 | RNVC: 9

8 Oct 1980

5340-14-432-5016
Angle Bracket

144325016
330A13-2022-30: RNCC: 3 | RNVC: 2

14 Jun 1989

5340-14-529-5474
Rod End Clevis

145295474
330A87-3824-27: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-459-1168
Vent Plug

144591168
C54001-193: RNCC: 3 | RNVC: 2

19 Nov 1992

5340-14-527-7187
Pipe Hanger

145277187
307-862-805-0: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-14-342-4742
Butt Hinge

143424742
4003-32MNACIERPH0SPHATE: RNCC: 3 | RNVC: 2

16 May 1977

5340-14-441-1912
Metal Grille

144411912
A315-1-120: RNCC: 3 | RNVC: 2
91501575: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-14-379-0074
Access Cover

143790074
PLU20-202: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-337-6494
Loop Clamp

143376494
7903083005: RNCC: 3 | RNVC: 2
7903083005: RNCC: 3 | RNVC: 2
7903083005: RNCC: 3 | RNVC: 2
79-03-083-005: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-14-330-0913
Metal Seal Ring

143300913
773-425-126AREP52: RNCC: 3 | RNVC: 2
773-425-126AREP52: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-438-7680
Synchro Clamp

144387680
330A92-1129-10: RNCC: 3 | RNVC: 2

4 Apr 1990

5340-14-514-4762
Shelf Bracket

145144762
45219925: RNCC: 3 | RNVC: 2
45219925: RNCC: 5 | RNVC: 2
IF-192-0422: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-360-8154
Mending Plate

143608154
6218-1213: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-475-0806
Mounting Bracket

144750806
DM4-5027000: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-286-4238
Buckle

142864238
31112-160-032: RNCC: 3 | RNVC: 2
31112-032: RNCC: 5 | RNVC: 2
099178C: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-383-8264
Bridge Clamp

143838264
5353-09: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-512-5503
Section Block Clamp

145125503
F706-94-01: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-404-1279
Rod End Clevis

144041279
0517-03-00-11: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-040-2165
Angle Bracket

140402165
NO PRIMARY REF14-040-2165: RNCC: 3 | RNVC: 2
S403447: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-331-6958
Butt Hinge

143316958
50-1-3312: RNCC: 3 | RNVC: 2
8076: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-325-4800
Mounting Plate

143254800
C11AA0201-040: RNCC: 3 | RNVC: 2
C11AA0201-040: RNCC: 5 | RNVC: 2
C11AA0201-040: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-299-2617
Mounting Bracket

142992617
NO PRIMARY REF14-299-2617: RNCC: 3 | RNVC: 2
19768: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-457-2625
Mounting Plate

144572625
402244A-SG10137-Z2CND17-12: RNCC: 3 | RNVC: 2

20 Aug 1992

5340-14-345-8363
Quick Release Pin

143458363
5380-30-10: RNCC: 3 | RNVC: 2

5 Nov 1977

5340-14-458-1325
Loop Clamp

144581325
M629-200000: RNCC: 3 | RNVC: 2
028303T: RNCC: 5 | RNVC: 2

8 Oct 1992

5340-14-393-6383
Mounting Plate

143936383
NO PRIMARY REF14-393-6383: RNCC: 3 | RNVC: 2
3-05037-0: RNCC: 5 | RNVC: 9

7 Jun 1984

5340-14-495-6694
Door Handle

144956694
E16520-02: RNCC: 3 | RNVC: 2
F300 0T 019 6020: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-321-4155
Rod End Connector

143214155
A0249-001F18: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-467-3594
Retaining Strap

144673594
RSGU2-20-15W5: RNCC: 3 | RNVC: 2

5 Jan 1994

5340-14-381-7779
Mending Plate

143817779
NO PRIMARY REF14-381-7779: RNCC: 3 | RNVC: 2
16932693: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-380-6298
Angle Bracket

143806298
3160S73-80-317: RNCC: 3 | RNVC: 2
85-692-1931: RNCC: 6 | RNVC: 9

29 Nov 1982

5340-14-310-2380
Control Rod

143102380
773-425-022DET3: RNCC: 3 | RNVC: 2
773-425-022DET3: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-230-3234
Loop Clamp

142303234
EN4114S16NH0: RNCC: 2 | RNVC: 2
51115305016: RNCC: 3 | RNVC: 2
55218-316-001DB: RNCC: 5 | RNVC: 2
55218-316D507DB: RNCC: 5 | RNVC: 2
55218-316N: RNCC: 5 | RNVC: 2
25S16: RNCC: 5 | RNVC: 2
A0021-25S16: RNCC: 5 | RNVC: 2
ASNA0021-25S16: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-473-2650
Cable Retractor

144732650
R05823-05-4000: RNCC: 3 | RNVC: 2
402588-001: RNCC: 5 | RNVC: 9

12 Dec 1994

5340-14-541-1808
Loop Clamp

145411808
51-3-1-31-06-020: RNCC: 3 | RNVC: 2

18 May 2004

5340-14-482-4212
Pipe Hanger

144824212
78733-032-034: RNCC: 3 | RNVC: 2

11 Jul 1996

5340-14-518-8509
Mounting Bracket

145188509
677-1-20-300: RNCC: 3 | RNVC: 2

23 Feb 2000

5340-14-365-3200
Loop Clamp

143653200
650-403-002-0: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-534-1279
Mounting Bracket

145341279
332P67-1526-02: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-440-3186
Support Hook

144403186
332A58-4564-21: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-390-6303
Rod End Clevis

143906303
FA888-90042047188: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-541-9809
Mounting Plate

145419809
20025-106: RNCC: 3 | RNVC: 2
502112002006A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-305-0607
Angle Bracket

143050607
M3E101-063: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-304-7199
Loop Clamp

143047199
NO PRIMARY REF14-304-7199: RNCC: 3 | RNVC: 2
852759: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-434-8161
Mounting Bracket

144348161
332A31-1442-20: RNCC: 3 | RNVC: 2

4 Oct 1989

5340-14-382-1876
Retaining Strap

143821876
M334-01-10-37-18: RNCC: 3 | RNVC: 2
453-10277-000: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-441-7082
Mounting Plate

144417082
330A93-2035-20: RNCC: 3 | RNVC: 2

12 Sep 1990

5340-14-324-8703
Lock-Release Lever

143248703
330A75-7164-01: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-225-8385
Synchro Clamp

142258385
S1693-1AG: RNCC: 3 | RNVC: 2
S1693Z1: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-426-5129
Expansion Plug

144265129
E29584A160AGTCD: RNCC: 2 | RNVC: 2
E29584-16AL: RNCC: 3 | RNVC: 2
E29584-16AL: RNCC: 5 | RNVC: 2
R93911-16AL: RNCC: 5 | RNVC: 2
R93911A160AGTCD: RNCC: 5 | RNVC: 2
BEX16L9B2: RNCC: 5 | RNVC: 2
E29584-16AL: RNCC: 6 | RNVC: 9
E2958416AL: RNCC: 6 | RNVC: 9

6 Sep 1988

5340-14-486-0442
Detent Plunger

144860442
429768: RNCC: 3 | RNVC: 2
429768-001: RNCC: 5 | RNVC: 9

26 Feb 1997

5340-14-351-1004
Retaining Band

143511004
8701023-10-1: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-440-1348
Bumper

144401348
332P87-0030-24: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-503-2785
Angle Bracket

145032785
332A65-1450-61: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-511-1160
Runner

145111160
442796: RNCC: 3 | RNVC: 2
442796-001: RNCC: 5 | RNVC: 9

2 Dec 1998

5340-14-389-2359
Access Cover

143892359
BSC8PA103-0038: RNCC: 3 | RNVC: 2
85-692-3813: RNCC: 6 | RNVC: 9

29 Nov 1983

5340-14-332-5511
Angle Bracket

143325511
F10A705200015: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-300-4338
Butt Hinge

143004338
60-01-40X50GACNICKELEB0UCH0N: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-318-8667
Mending Plate

143188667
NO PRIMARY REF14-318-8667: RNCC: 3 | RNVC: 2
541035: RNCC: 5 | RNVC: 2
2541035: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-449-3597
Section Block Clamp

144493597
R4A711-65-02: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-389-1127
Angle Bracket

143891127
366A25-0032-2501: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-485-5792
Mounting Bracket

144855792
332A58-1618-21: RNCC: 3 | RNVC: 2

29 Jan 1997

5340-14-392-7124
Loop Clamp

143927124
1816025160: RNCC: 3 | RNVC: 2
181-6025-160: RNCC: 5 | RNVC: 2

7 Apr 1984

5340-14-448-6482
Access Cover

144486482
NO PRIMARY REF14-448-6482: RNCC: 3 | RNVC: 2
980132: RNCC: 5 | RNVC: 9

4 Jul 1991

5340-14-373-1684
Anchor Strap

143731684
7910009678: RNCC: 3 | RNVC: 2
615891: RNCC: 5 | RNVC: 2
1808-04: RNCC: 5 | RNVC: 2

21 Oct 1981

5340-14-437-9542
Plate Spacer

144379542
330A76-0783-20: RNCC: 3 | RNVC: 2

28 Feb 1990

5340-14-356-4782
Handwheel

143564782
282-12: RNCC: 3 | RNVC: 2
131-12: RNCC: 5 | RNVC: 2
ET0ILE-SERIE131: RNCC: 5 | RNVC: 2

15 May 1979

5340-14-462-6227
Metal Grille

144626227
P-2090-13-05-30: RNCC: 3 | RNVC: 2
SDMP-2090-13-05-30: RNCC: 5 | RNVC: 9
P-2090-13-05-30: RNCC: 5 | RNVC: 9

28 Apr 1993

5340-14-340-9112
Rod End Clevis

143409112
330A87-1051-21: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-374-6399
Hub Clamp

143746399
8724110-001: RNCC: 3 | RNVC: 2
8724110001: RNCC: 5 | RNVC: 2

30 Jan 1982

5340-14-377-8676
Synchro Clamp

143778676
1501587: RNCC: 3 | RNVC: 2
1501587A: RNCC: 5 | RNVC: 2
NSA8603-587: RNCC: 5 | RNVC: 2

10 Jun 1982

5340-14-332-0324
Protection Bellows

143320324
A00808-04-1000P007: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-529-1494
Mounting Bracket

145291494
195-31001-040: RNCC: 3 | RNVC: 2

13 Mar 2002

5340-14-408-0325
Mounting Plate

144080325
20724851-9: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-451-2098
Rod End Connector

144512098
PM1A379316051: RNCC: 3 | RNVC: 2
PM1A379316051: RNCC: 5 | RNVC: 2

6 Nov 1991

5340-14-285-1816
Threaded Rod End

142851816
A10-68-112-12-0: RNCC: 3 | RNVC: 2
A10-68-112-12-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-298-1622
Retaining Strap

142981622
P00260-49: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-361-5177
Control Rod

143615177
B0188-019F5: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-372-3899
Webbing Strap

143723899
LE33023-130-050: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-461-4572
Mounting Bracket

144614572
BC139A010-130: RNCC: 3 | RNVC: 9
1003957W00: RNCC: 5 | RNVC: 2

10 Mar 1993

5340-14-441-2202
Mounting Bracket

144412202
6801V32-2120-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-303-8367
Rod End Connector

143038367
554-413-509DET3: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-402-3369
Angle Bracket

144023369
413-01492-0: RNCC: 3 | RNVC: 2

3 Jul 1985

5340-14-248-9973
Rod End Clevis

142489973
D2140-5-37: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-503-2625
Flush Catch Claw

145032625
332A21-1385-21: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-513-1751
Webbing Strap

145131751
020009-1-VO-L6: RNCC: 3 | RNVC: 2
20091V0L6: RNCC: 5 | RNVC: 2

9 Mar 1999

5340-14-453-2776
Mounting Plate

144532776
2577A-66-01-01: RNCC: 3 | RNVC: 2
89467765: RNCC: 5 | RNVC: 2

12 Feb 1992

5340-14-434-4737
Loop Clamp

144344737
75109-10: RNCC: 3 | RNVC: 2
CDM2-10: RNCC: 5 | RNVC: 2

20 Sep 1989

5340-14-398-6432
Webbing Strap

143986432
E150-6M: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-347-2206
Butt Hinge

143472206
50-100CHR0ME: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-14-309-9564
Loop Clamp

143099564
NO PRIMARY REF14-309-9564: RNCC: 3 | RNVC: 2
17-600-22: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-370-7405
Lock-Release Lever

143707405
676-43631-00: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-303-4972
Control Rod

143034972
NO PRIMARY REF14-303-4972: RNCC: 3 | RNVC: 2
48-02-30-112: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-472-8744
Cover Strip

144728744
332A25-1377-20: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-310-2491
Rod End Clevis

143102491
773-210-065FF14DET31: RNCC: 3 | RNVC: 2
773-210-065FF14DET31: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-434-5359
Angle Bracket

144345359
RP35P110-444: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-549-5009
Mounting Bracket

145495009
MC201-215265-00: RNCC: 3 | RNVC: 2

11 Apr 2006

5340-14-388-5831
Mounting Plate

143885831
416372-100: RNCC: 3 | RNVC: 2
416372-100: RNCC: 5 | RNVC: 2
416372-100: RNCC: 5 | RNVC: 9

3 Nov 1983

5340-14-440-1543
Surface Bolt

144401543
SCN600-022-01: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-441-6665
Butt Hinge

144416665
BN339-506A02-0-008: RNCC: 2 | RNVC: 2

10 Sep 1990

5340-14-488-4821
Angle Bracket

144884821
U1831646: RNCC: 3 | RNVC: 2
U18316-46: RNCC: 5 | RNVC: 2

14 May 1997

5340-14-530-6847
Cover Strip

145306847
T524A2001511: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-454-8620
Loop Clamp

144548620
HB121WG15: RNCC: 3 | RNVC: 2
121WG15: RNCC: 5 | RNVC: 2

24 Apr 1992

5340-14-486-1362
Mounting Bracket

144861362
46079000: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-229-2072
Rod End Clevis

142292072
A10-16-500-11-0: RNCC: 3 | RNVC: 2
A10-16-500-11-0: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-360-3675
Retaining Strap

143603675
NO PRIMARY REF14-360-3675: RNCC: 3 | RNVC: 2
33000603: RNCC: 5 | RNVC: 9
9933000603: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-524-1781
Mounting Plate

145241781
2251233: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-507-9830
Mounting Plate

145079830
4773122410: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-532-4315
Utility Access Door

145324315
9010-412-000B: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-368-4214
Loop Clamp

143684214
262-50-56227-01: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-14-377-1616
Retaining Strap

143771616
6030-46: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-433-6489
Mechanical Puller

144336489
0453-6089916: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-428-4657
Loop Clamp

144284657
61313105014: RNCC: 3 | RNVC: 2
81G14: RNCC: 5 | RNVC: 2

8 Dec 1988

5340-14-416-6825
Angle Bracket

144166825
412802110003: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-249-9252
Access Cover

142499252
48294: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-461-9574
Spring Holder

144619574
T700A5285034100: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-544-3406
Mounting Bracket

145443406
82077152000: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-14-475-3284
Anchor Strap

144753284
574831: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-14-462-0117
Mounting Bracket

144620117
GA61541: RNCC: 3 | RNVC: 2
GA61541: RNCC: 5 | RNVC: 2

31 Mar 1993

5340-14-461-3247
Rigid Caster

144613247
460250L20: RNCC: 3 | RNVC: 2

8 Mar 1993

5340-14-495-6172
Mounting Bracket

144956172
317863: RNCC: 3 | RNVC: 2
317863: RNCC: 5 | RNVC: 9
F300 0T 019 5446: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-481-3649
Webbing Strap

144813649
10023676: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-353-0202
Angle Bracket

143530202
A11A231210002: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-447-2899
Retaining Strap

144472899
5608560003: RNCC: 3 | RNVC: 2
G13W3: RNCC: 5 | RNVC: 2

15 May 1991

5340-14-497-7127
Access Cover

144977127
1.407.081: RNCC: 3 | RNVC: 2

15 Oct 1997

5340-14-446-7160
Angle Bracket

144467160
39958463: RNCC: 3 | RNVC: 2
39958463: RNCC: 5 | RNVC: 9

9 Apr 1991

5340-14-448-1484
Loop Clamp

144481484
21S0500605: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-448-0873
Door Button

144480873
PM1A239121008: RNCC: 3 | RNVC: 2
PM1A239121008: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-535-6205
Bow Handle

145356205
7-1000-105: RNCC: 3 | RNVC: 2
8046990T00: RNCC: 5 | RNVC: 2

11 Jun 2003

5340-14-423-0581
Mounting Plate

144230581
39229157: RNCC: 3 | RNVC: 2
39229157: RNCC: 5 | RNVC: 9

31 Mar 1988

5340-14-416-6543
Corner Brace

144166543
B146962-2: RNCC: 3 | RNVC: 2

24 Jun 1987

5340-14-383-2978
Runner

143832978
24232: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-426-3165
Retaining Strap

144263165
23123539-0: RNCC: 3 | RNVC: 2

23 Aug 1988

5340-14-378-8195
Retaining Strap

143788195
411879: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-554-3309
Mounting Bracket

145543309
82106439000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-553-3046
Mounting Bracket

145533046
T720G3002122: RNCC: 3 | RNVC: 2

22 Mar 2007

5340-14-463-0206
Angle Bracket

144630206
5000803552: RNCC: 3 | RNVC: 2

12 May 1993

5340-14-258-9622
Rod End Connector

142589622
540116: RNCC: 3 | RNVC: 2
540116: RNCC: 5 | RNVC: 2
540116: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-517-9513
Sliding Door Track

145179513
10495695: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-14-551-2530
Rim Latch

145512530
930010S200-02A: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-335-7712
Angle Bracket

143357712
160-888072-11: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-473-6957
Mounting Plate

144736957
365A61-3421-20: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-509-8337
Stand Base

145098337
MS363-30-03: RNCC: 3 | RNVC: 2
5340AA1011190: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-316-7935
Turnbuckle Body

143167935
773-410-078FF7: RNCC: 3 | RNVC: 2
773-410-078FF7: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-472-8654
Mounting Bracket

144728654
332A21-1030-8301: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-316-0144
Loop Clamp

143160144
51215302005: RNCC: 3 | RNVC: 2
20S5: RNCC: 5 | RNVC: 2
A0021-20S05: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-287-1689
Snap Hook

142871689
22111-030: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-409-9588
Mounting Plate

144099588
1909-24-02: RNCC: 3 | RNVC: 9

4 Jun 1986

5340-14-473-8315
Mounting Plate

144738315
332A58-1812-21: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-367-5326
Swivel Caster

143675326
TP4BA125-23L: RNCC: 3 | RNVC: 2
0219347P00: RNCC: 5 | RNVC: 2

19 Jan 1981

5340-14-549-8454
Lock Bolt

145498454
T711A10T0011: RNCC: 1 | RNVC: 2
VAJM23D396-254: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-217-9091
Cover Strip

142179091
3160S25-22-032: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-217-3019
Loop Clamp

142173019
3160S73-69-020: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-412-8660
Webbing Strap

144128660
ST406M75A17-26: RNCC: 3 | RNVC: 2

5 Nov 1986

5340-14-475-0613
Loop Clamp

144750613
312-18485-001: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-529-5616
Mounting Bracket

145295616
330A68-3241-01: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-390-1629
Angle Bracket

143901629
366A75-3245-20: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-437-4492
Mounting Bracket

144374492
332A61-2333-06: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-276-3806
Loop Clamp

142763806
NO PRIMARY REF14-276-3806: RNCC: 3 | RNVC: 2
BS12-001: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-561-5780
Utility Resilient Mount

145615780
136023: RNCC: 3 | RNVC: 2
621-55SH-M16: RNCC: 5 | RNVC: 2

29 Jul 2009

5340-14-459-7325
Loop Holder

144597325
LN321022REP7BLAG3-L32X32X3: RNCC: 3 | RNVC: 2
RAB0190: RNCC: 5 | RNVC: 2

15 Dec 1992

5340-14-314-2780
Cover Strip

143142780
341A23-1108-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-564-0249
Utility Resilient Mount

145640249
8D-7209: RNCC: 3 | RNVC: 2

2 Apr 2010

5340-14-271-5431
Loop Clamp

142715431
262-12-50514-03: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-500-8168
Section Block Clamp

145008168
E64009998114: RNCC: 3 | RNVC: 2
F300 0T 024 8370: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-467-7604
Loop Clamp

144677604
PE27019RI5D: RNCC: 3 | RNVC: 2
PE27019R15D: RNCC: 5 | RNVC: 2

27 Jan 1994

5340-14-362-4779
Webbing Strap

143624779
5000501147: RNCC: 3 | RNVC: 2
5000501147: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-525-6482
Mounting Bracket

145256482
20 242 020 7200: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-515-4220
Loop Clamp

145154220
41612038A: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-350-4872
Mending Plate

143504872
199832: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-515-3313
Mounting Bracket

145153313
3534308201: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-295-8340
Rod End Clevis

142958340
70-97235: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-531-3286
Rod End Clevis

145313286
F10A794002110A1: RNCC: 3 | RNVC: 2

8 Aug 2002

5340-14-545-2517
Pipe Hanger

145452517
S215A3014219: RNCC: 3 | RNVC: 2

29 Mar 2005

5340-14-513-3839
Access Cover

145133839
DE33148: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-14-409-3468
Mounting Plate

144093468
199573: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-480-3827
Anchor Strap

144803827
35 58 51: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-533-5443
Access Cover

145335443
F1263957: RNCC: 3 | RNVC: 2

10 Feb 2003

5340-14-461-1249
Access Cover

144611249
39057368: RNCC: 3 | RNVC: 2
39057368: RNCC: 5 | RNVC: 2

24 Feb 1993

5340-14-391-7295
Rod End Clevis

143917295
1030433107: RNCC: 3 | RNVC: 2
1030433107: RNCC: 5 | RNVC: 2

21 Mar 1984

5340-14-304-2723
Access Cover

143042723
36439: RNCC: 3 | RNVC: 2
36439: RNCC: 5 | RNVC: 9
460246R: RNCC: 5 | RNVC: 9
MAF0000001103: RNCC: 6 | RNVC: 9
MAF0001002054: RNCC: 6 | RNVC: 9

1 Jan 1974

5340-14-319-3430
Anchor Strap

143193430
100S30: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-483-6911
Access Cover

144836911
H107733: RNCC: 3 | RNVC: 2
F300 0T 015 7686: RNCC: 6 | RNVC: 9

27 Sep 1996

5340-14-418-5612
Angle Bracket

144185612
4-454315: RNCC: 3 | RNVC: 9
4-454315: RNCC: 5 | RNVC: 2
4-454315: RNCC: 5 | RNVC: 9

2 Sep 1987

5340-14-514-0773
Pawl Fastener Set

145140773
PM1A005001N25: RNCC: 3 | RNVC: 2
PM1A005001N25: RNCC: 5 | RNVC: 2
MJCI: RNCC: 5 | RNVC: 9

22 Apr 1999

5340-14-360-2984
Rod End Connector

143602984
512528: RNCC: 3 | RNVC: 2
SOG512528: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-479-0730
Retaining Strap

144790730
23245890-5: RNCC: 3 | RNVC: 2

13 Dec 1995

5340-14-257-7554
Retaining Strap

142577554
21924: RNCC: 3 | RNVC: 2
E137D666: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-555-7625
Loop Clamp

145557625
C-H-10600: RNCC: 3 | RNVC: 2

12 Dec 2007

5340-14-473-6385
Mounting Plate

144736385
332A11-4024-20: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-390-2195
Loop Clamp

143902195
182-1324: RNCC: 3 | RNVC: 2
182-1323: RNCC: 5 | RNVC: 2

26 Jan 1984

5340-14-432-6044
Mounting Plate

144326044
29780215: RNCC: 3 | RNVC: 9

14 Jun 1989

5340-14-449-8654
Shimmy Damper

144498654
135565: RNCC: 3 | RNVC: 2
G3 110-06 SG: RNCC: 5 | RNVC: 2
135565: RNCC: 5 | RNVC: 2
CB1380-35-06-CIM: RNCC: 5 | RNVC: 2
CB1380-35-06CIM: RNCC: 5 | RNVC: 2
H95-216-89-108-6FM: RNCC: 5 | RNVC: 2
460.03.0004: RNCC: 5 | RNVC: 2
CB1380-35-06-CIM: RNCC: 5 | RNVC: 2

11 Sep 1991

5340-14-264-1744
Loop Clamp

142641744
55219-310D507DB: RNCC: 3 | RNVC: 2
55219-310-001DB: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-457-6606
Webbing Strap

144576606
B3000-CAT2-LG10M: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-336-5096
Webbing Strap

143365096
190258: RNCC: 3 | RNVC: 2

14 Aug 1976

5340-14-394-6418
Mounting Plate

143946418
79109600: RNCC: 3 | RNVC: 2
79109600: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-340-3133
Pipe Hanger

143403133
M3C704-063: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-375-5000
Retaining Band

143755000
365A84-3052-01: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-528-7580
Angle Bracket

145287580
78704-20-050G: RNCC: 3 | RNVC: 2

14 Feb 2002

5340-14-531-2306
Mounting Bracket

145312306
341A81-5045-21: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-437-9500
Mounting Bracket

144379500
330A58-6182-04: RNCC: 3 | RNVC: 2

28 Feb 1990

5340-14-353-6405
Bumper

143536405
C32BB0101-056: RNCC: 3 | RNVC: 2
C32BB0101-056: RNCC: 5 | RNVC: 2
C32BB0101-056: RNCC: 5 | RNVC: 9

16 Jan 1979

5340-14-277-8991
Loop Clamp

142778991
NO PRIMARY REF14-277-8991: RNCC: 3 | RNVC: 2
PC6251B: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-328-8676
Detent Plunger

143288676
330A22-2437-00: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-415-2542
Bumper

144152542
3160S73-74-598: RNCC: 3 | RNVC: 2
85-692-9533: RNCC: 6 | RNVC: 9

22 Apr 1987

5340-14-442-0211
Loop Clamp

144420211
341A72-1036-20: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-465-2887
Mounting Plate

144652887
365A68-2616-29: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-213-7669
Loop Clamp

142137669
0098900300: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-344-6207
Anchor Strap

143446207
NO PRIMARY REF14-344-6207: RNCC: 3 | RNVC: 2
3170522: RNCC: 5 | RNVC: 9

9 Sep 1977

5340-14-520-9186
Loop Clamp

145209186
A0021-11N31: RNCC: 1 | RNVC: 2
110003100: RNCC: 3 | RNVC: 2
11N31: RNCC: 5 | RNVC: 2
51300005031: RNCC: 5 | RNVC: 9

21 Jun 2000

5340-14-376-0198
Access Cover

143760198
366A21-1174-20: RNCC: 3 | RNVC: 2

30 Mar 1982

Load More Results