What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 55 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 55 of 446

5340-14-420-0351
Webbing Strap

144200351
4-012-0044: RNCC: 3 | RNVC: 2

18 Nov 1987

5340-14-424-2120
Anchor Strap

144242120
6311-18: RNCC: 3 | RNVC: 2
9251437880: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-281-3071
Loop Clamp

142813071
501-779-690-0: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-302-1494
Mending Plate

143021494
A10-22-800-03-0: RNCC: 3 | RNVC: 2
A10-22-800-03-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-440-8438
Bow Handle

144408438
10501-004: RNCC: 3 | RNVC: 2

30 Jul 1990

5340-14-526-4778
Pipe Hanger

145264778
78733-056-032A: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-549-9046
Access Cover

145499046
2092197-001: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-373-7084
Utility Access Door

143737084
365A25-0014-0405: RNCC: 3 | RNVC: 2

14 Mar 1996

5340-14-488-4367
Access Cover

144884367
706A31-690-020: RNCC: 1 | RNVC: 2
A20621162: RNCC: 3 | RNVC: 2

7 May 1997

5340-14-503-7141
Cover Strip

145037141
330A25-2037-35: RNCC: 3 | RNVC: 2

28 Jan 1998

5340-14-459-6657
Arched Cushion

144596657
MAT169-0012F19DE18: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-305-7026
Butt Hinge

143057026
MS7524-3A7200: RNCC: 3 | RNVC: 2
MS7524-3A: RNCC: 5 | RNVC: 2
MS7524-3A72: RNCC: 5 | RNVC: 9
MS7524-3A1830: RNCC: 5 | RNVC: 9
MS7524-3A: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-541-7334
Corner Brace

145417334
4306-332B385: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-433-9159
Loop Clamp

144339159
412703030011: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-14-442-4864
Anchor Strap

144424864
007780010P: RNCC: 3 | RNVC: 2

17 Oct 1990

5340-14-463-8716
Retaining Strap

144638716
166016: RNCC: 3 | RNVC: 2
89170127: RNCC: 5 | RNVC: 2

30 Jun 1993

5340-14-488-2218
Access Cover

144882218
8002545P00: RNCC: 3 | RNVC: 2

23 Apr 1997

5340-14-475-9878
Access Cover

144759878
4640362B: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-479-7998
Access Cover

144797998
11095T410001: RNCC: 3 | RNVC: 2

7 Feb 1996

5340-14-430-0453
Anchor Strap

144300453
20629908: RNCC: 3 | RNVC: 2
20629908: RNCC: 5 | RNVC: 9

27 Feb 1989

5340-14-555-9996
Mounting Bracket

145559996
0319738360: RNCC: 3 | RNVC: 2

21 Jan 2008

5340-14-302-7939
Screw Hook

143027939
CR0CHETACIER3X20: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-306-9379
Retaining Strap

143069379
568379: RNCC: 3 | RNVC: 2
20568379-9: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-338-4326
Angle Bracket

143384326
330A75-5420-20: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-541-7924
Mounting Bracket

145417924
E63101000058: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-477-7934
Pipe Hanger

144777934
050120: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-14-343-8793
Retaining Clip

143438793
490564: RNCC: 3 | RNVC: 2

13 Jul 1977

5340-14-523-0231
Mounting Plate

145230231
47139191: RNCC: 3 | RNVC: 2

18 Dec 2000

5340-14-504-0780
Bumper

145040780
254014: RNCC: 3 | RNVC: 2

5 Feb 1998

5340-14-381-2500
Mending Plate

143812500
71240: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-550-9068
Retaining Bail

145509068
RA1B794300832: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-435-5397
Rod End Clevis

144355397
MY20241-96801: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-345-7662
Mending Plate

143457662
414-10656-000: RNCC: 3 | RNVC: 2
414-10656-000: RNCC: 5 | RNVC: 2

5 Oct 1977

5340-14-523-7126
Mounting Plate

145237126
S1823525: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-486-0410
Loop Clamp

144860410
673444A-T2510-P11/P21: RNCC: 3 | RNVC: 2
673444A: RNCC: 5 | RNVC: 2

26 Feb 1997

5340-14-352-4436
Surface Bolt

143524436
262-51-81134-20: RNCC: 3 | RNVC: 2
85-689-5777: RNCC: 6 | RNVC: 9

16 Oct 1978

5340-14-455-9068
Pawl Fastener

144559068
766A: RNCC: 3 | RNVC: 9

11 Jun 1992

5340-14-385-9092
Quick Release Pin

143859092
143851: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-472-5297
Rim Lock Set

144725297
350A25-1532-02: RNCC: 3 | RNVC: 2

27 Oct 1994

5340-14-542-9904
Loop Clamp

145429904
309930/5: RNCC: 3 | RNVC: 2

18 Aug 2004

5340-14-281-2054
Retaining Strap

142812054
D1010-1235: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-449-1864
Mounting Bracket

144491864
330A67-4213-20: RNCC: 3 | RNVC: 2

5 Aug 1991

5340-14-433-7892
Angle Bracket

144337892
330A22-2023-23: RNCC: 3 | RNVC: 2

9 Aug 1989

5340-14-475-2123
Loop Clamp

144752123
CR15-30-650: RNCC: 3 | RNVC: 2

22 Mar 1995

5340-14-464-8276
Surface Bolt

144648276
12416-1-57N: RNCC: 3 | RNVC: 2

1 Sep 1993

5340-14-476-8551
Lock Bolt

144768551
3802613: RNCC: 3 | RNVC: 2
18512591-6: RNCC: 5 | RNVC: 2
3802613: RNCC: 5 | RNVC: 2

5 Jul 1995

5340-14-520-2659
Butt Hinge

145202659
52.1.3571: RNCC: 3 | RNVC: 2
SYB2204: RNCC: 5 | RNVC: 2

17 May 2000

5340-14-468-4694
Mounting Bracket

144684694
312-16426-001: RNCC: 3 | RNVC: 2

3 Mar 1994

5340-14-478-1685
Retaining Bail

144781685
MAT162-0078F1: RNCC: 3 | RNVC: 2

11 Oct 1995

5340-14-476-8367
Mounting Plate

144768367
711-947: RNCC: 3 | RNVC: 2

5 Jul 1995

5340-14-411-1675
Angle Bracket

144111675
331A32-2865-20: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-451-1034
Bumper

144511034
BLC236676: RNCC: 3 | RNVC: 2

30 Oct 1991

5340-14-534-7518
Bumper

145347518
46061816: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-247-4342
Synchro Clamp

142474342
79001354: RNCC: 3 | RNVC: 2
79001354: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-409-8245
Expansion Plug

144098245
DLT111756: RNCC: 3 | RNVC: 2

2 Jun 1986

5340-14-403-9109
Bridge Clamp

144039109
NO PRIMARY REF14-403-9109: RNCC: 3 | RNVC: 2
P3H011212-01: RNCC: 5 | RNVC: 9

11 Sep 1985

5340-14-508-6624
Corner Brace

145086624
JGA05-85: RNCC: 3 | RNVC: 2

23 Sep 1998

5340-14-440-1320
Bumper

144401320
332P72-1053-AW: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-264-1728
Loop Clamp

142641728
55218-310-4101: RNCC: 3 | RNVC: 2
55218-310S: RNCC: 5 | RNVC: 2
55218-310B407DB: RNCC: 5 | RNVC: 2
55218-310-002DB: RNCC: 5 | RNVC: 2
55218-310B407DB: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-496-2310
Mounting Plate

144962310
75085-1: RNCC: 3 | RNVC: 2
F300 0T 021 0489: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-512-5546
Section Block Clamp

145125546
F764-17-01: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-285-2925
Retaining Strap

142852925
2-11803: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-431-7546
Angle Bracket

144317546
23601300-4: RNCC: 3 | RNVC: 2

10 May 1989

5340-14-254-1877
Runner

142541877
771031-160MM: RNCC: 3 | RNVC: 2
SOG771031-160MM: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-432-7459
Quick Release Pin

144327459
51453C8R20NL8C6: RNCC: 3 | RNVC: 2
51453C8R20NL8C6: RNCC: 5 | RNVC: 2
51453C8R20NL8C6: RNCC: 5 | RNVC: 2

21 Jun 1989

5340-14-497-8757
Mounting Bracket

144978757
27133272-5: RNCC: 3 | RNVC: 2

22 Oct 1997

5340-14-455-6019
Mounting Bracket

144556019
900-370: RNCC: 3 | RNVC: 2
91716481: RNCC: 5 | RNVC: 2
900370: RNCC: 5 | RNVC: 2
85-694-1612: RNCC: 6 | RNVC: 9

28 May 1992

5340-14-338-5632
Mortise Lock Set

143385632
47659: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-549-2652
Mounting Bracket

145492652
FARD5 007 06 P 5548A04: RNCC: 3 | RNVC: 2

16 Mar 2006

5340-14-358-4251
Angle Bracket

143584251
389561: RNCC: 3 | RNVC: 2

13 Aug 1979

5340-14-446-2725
Butt Hinge

144462725
5000370223: RNCC: 3 | RNVC: 2
5000370223: RNCC: 5 | RNVC: 9

11 Mar 1991

5340-14-430-5694
Cover Strip

144305694
PM1A217210001: RNCC: 3 | RNVC: 2
PM1A217210001: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-549-7159
Mounting Bracket

145497159
072902987000000GAUCHE: RNCC: 3 | RNVC: 2

2 May 2006

5340-14-545-7581
Corner Brace

145457581
211642: RNCC: 3 | RNVC: 2

10 May 2005

5340-14-571-8844
Utility Resilient Mount

145718844
82662458000: RNCC: 3 | RNVC: 2

22 May 2012

5340-14-545-2643
Mounting Bracket

145452643
S215A4012101: RNCC: 3 | RNVC: 2

30 Mar 2005

5340-14-489-0509
Mounting Bracket

144890509
1277 94A5400: RNCC: 3 | RNVC: 2
1277 94A5400: RNCC: 5 | RNVC: 9

18 Jun 1997

5340-14-542-2520
Clamping Catch

145422520
773947708: RNCC: 3 | RNVC: 2
773947708: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-515-4099
Loop Clamp

145154099
21612056F: RNCC: 3 | RNVC: 2
21612056: RNCC: 5 | RNVC: 2

13 Jul 1999

5340-14-460-5556
Bumper

144605556
405954: RNCC: 3 | RNVC: 2
405954: RNCC: 5 | RNVC: 9

29 Jan 1993

5340-14-358-2486
Retaining Strap

143582486
5000498130: RNCC: 3 | RNVC: 2
5000498130: RNCC: 5 | RNVC: 9

13 Aug 1979

5340-14-547-5282
Angle Bracket

145475282
RA1M705951311N1: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-475-0705
Mounting Bracket

144750705
MB1404F00: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-552-9998
Angle Bracket

145529998
0029923: RNCC: 3 | RNVC: 2

22 Feb 2007

5340-14-541-9484
Protection Bellows

145419484
502101007150A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-308-4049
Loop Clamp

143084049
E4P703-60-900: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-473-2428
Mounting Bracket

144732428
321A58-9702-22: RNCC: 3 | RNVC: 2

7 Dec 1994

5340-14-257-8212
Bumper

142578212
NO PRIMARY REF14-257-8212: RNCC: 3 | RNVC: 2
22: RNCC: 5 | RNVC: 9
720111: RNCC: 5 | RNVC: 9
512213: RNCC: 5 | RNVC: 9
062720111: RNCC: 5 | RNVC: 9
66507: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-286-8458
Bumper

142868458
3219: RNCC: 3 | RNVC: 2
85-669-7200: RNCC: 6 | RNVC: 9

1 Jan 1972

5340-14-498-1479
Mounting Plate

144981479
NO PRIMARY REF14-498-1479: RNCC: 3 | RNVC: 2
25296610: RNCC: 5 | RNVC: 9
25296610: RNCC: 5 | RNVC: 9
F300 0T 004 2717: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-365-7329
Support Hook

143657329
A2013-00: RNCC: 3 | RNVC: 9

8 Oct 1980

5340-14-465-2761
Angle Bracket

144652761
365A61-3001-24: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-532-1328
Strap Fastener Loop

145321328
5010559345: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-14-312-6828
Rod End Clevis

143126828
262-20-27097-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-282-0746
Swivel Caster

142820746
108-3CMZINGUE: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-418-3296
Access Cover

144183296
3-458110: RNCC: 3 | RNVC: 9
2163481: RNCC: 5 | RNVC: 2
3-458110: RNCC: 5 | RNVC: 2
3-458110: RNCC: 5 | RNVC: 9

12 Aug 1987

5340-14-394-2299
Mounting Plate

143942299
AS510-15A: RNCC: 3 | RNVC: 2
AS511-15A: RNCC: 5 | RNVC: 2

23 Jun 1984

5340-14-461-0522
Handwheel

144610522
13-146-160-16: RNCC: 3 | RNVC: 2
ESM13-146-160-16: RNCC: 5 | RNVC: 2
ESM13-146-160-16: RNCC: 5 | RNVC: 2
ESM13-146-160-16: RNCC: 5 | RNVC: 2

22 Feb 1993

5340-14-549-9084
Access Cover

145499084
2092374-001: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-434-7706
Loop Clamp

144347706
0785318N00: RNCC: 3 | RNVC: 2

4 Oct 1989

5340-14-496-1147
Mounting Bracket

144961147
100393-47J: RNCC: 3 | RNVC: 2
F300 0T 020 9205: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-363-9018
Loop Clamp

143639018
17255-379-690: RNCC: 3 | RNVC: 2
17255-379-690: RNCC: 5 | RNVC: 2

7 Aug 1980

5340-14-449-7271
Mounting Plate

144497271
721B7002: RNCC: 3 | RNVC: 2
89469794: RNCC: 5 | RNVC: 2

4 Sep 1991

5340-14-454-2557
Lock-Release Lever

144542557
16558576: RNCC: 3 | RNVC: 2
16558576: RNCC: 5 | RNVC: 9

26 Mar 1992

5340-14-505-2888
Block Clamp

145052888
011354412: RNCC: 3 | RNVC: 9

18 Mar 1998

5340-14-334-9430
Anchor Strap

143349430
APM1100-32: RNCC: 3 | RNVC: 2

2 Jun 1976

5340-14-349-3290
Access Cover

143493290
6010-404005: RNCC: 3 | RNVC: 2
399-19T02-101: RNCC: 5 | RNVC: 2
404005: RNCC: 5 | RNVC: 2

22 May 1978

5340-14-345-1594
Expansion Plug

143451594
FD1B266-003: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-295-1800
Retaining Strap

142951800
158429: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-531-7352
Angle Bracket

145317352
330A62-0207-20: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-14-539-3507
Mounting Bracket

145393507
21242216-00: RNCC: 3 | RNVC: 2
21242216-7: RNCC: 5 | RNVC: 2

7 Jan 2004

5340-14-520-5103
Arched Cushion

145205103
MAT169-0012F22DE30: RNCC: 3 | RNVC: 2

19 May 2000

5340-14-510-2804
Mounting Bracket

145102804
FC85-007-1: RNCC: 3 | RNVC: 2
1560AA8018476: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-473-3196
Angle Bracket

144733196
504B131: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-365-8093
Rod End Clevis

143658093
2-048-370: RNCC: 3 | RNVC: 2
91515768: RNCC: 5 | RNVC: 2

8 Oct 1980

5340-14-541-9706
Mounting Plate

145419706
20011-269: RNCC: 3 | RNVC: 2
502118X05057A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-514-8439
Retaining Strap

145148439
203024011021A: RNCC: 3 | RNVC: 9

22 Jun 1999

5340-14-301-0505
Mending Plate

143010505
1050380032: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-508-6723
Mounting Bracket

145086723
501-729-749-0: RNCC: 3 | RNVC: 2

23 Sep 1998

5340-14-475-9882
Access Cover

144759882
4640598A: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-508-0041
Locking Stay

145080041
8900000339: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-550-2901
Access Cover

145502901
MB6300F00: RNCC: 3 | RNVC: 2

15 Jun 2006

5340-14-471-8148
Rod End Clevis

144718148
008804044P: RNCC: 3 | RNVC: 2

16 Sep 1994

5340-14-300-9284
Access Cover

143009284
183904: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-451-7867
Anchor Strap

144517867
5000920637: RNCC: 3 | RNVC: 2

4 Dec 1991

5340-14-404-7099
Access Cover

144047099
20777736: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-528-5812
Access Cover

145285812
908627: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-471-9386
Plug Button

144719386
A61800: RNCC: 3 | RNVC: 2

28 Sep 1994

5340-14-500-9027
Access Cover

145009027
C66403100036: RNCC: 3 | RNVC: 2
F300 0T 024 9234: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-541-9306
Plug Button

145419306
AD02362A: RNCC: 3 | RNVC: 2

2 Jul 2004

5340-14-504-9748
Access Cover

145049748
5010341098: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-440-2890
Access Cover

144402890
39533598: RNCC: 3 | RNVC: 2
39533598: RNCC: 5 | RNVC: 9

11 Jul 1990

5340-14-523-2274
Access Cover

145232274
A35456: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-202-8417
Rod End Clevis

142028417
0000235083: RNCC: 3 | RNVC: 2
0000235083: RNCC: 5 | RNVC: 9
235083: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-14-429-8999
Dashpot Piston

144298999
1216-262-400A: RNCC: 3 | RNVC: 2

15 Feb 1989

5340-14-518-1608
Angle Bracket

145181608
5010065382: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-515-2191
Loop Clamp

145152191
0009550823: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-515-6060
Mounting Plate

145156060
A92000196: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-456-9072
Blank Panel

144569072
30602303: RNCC: 3 | RNVC: 2
30602303: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-14-453-2906
Retaining Band

144532906
39117495: RNCC: 3 | RNVC: 9

12 Feb 1992

5340-14-435-1043
Angle Bracket

144351043
3005438: RNCC: 3 | RNVC: 2

18 Oct 1989

5340-14-437-6587
Retaining Strap

144376587
PM1A167220310: RNCC: 3 | RNVC: 2
PM1A167220310: RNCC: 5 | RNVC: 2

7 Feb 1990

5340-14-399-1196
Angle Bracket

143991196
5000714748: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-335-7630
Retaining Strap

143357630
160-70818-02: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-291-5898
Locking Stay

142915898
4R013322: RNCC: 3 | RNVC: 2
4R013322: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-401-4168
Support Hook

144014168
341A58-1506-20: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-501-3131
Mounting Bracket

145013131
521661-000: RNCC: 3 | RNVC: 2
F300 0T 025 3540: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-521-2985
Mounting Plate

145212985
10529448: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-484-6760
Mounting Plate

144846760
47029940: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-418-1138
Mending Plate

144181138
BJM00477: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-231-1799
Bail Handle

142311799
584510: RNCC: 3 | RNVC: 2
584510: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-545-4631
Mounting Bracket

145454631
RA1A701626217A1: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-372-2793
Angle Bracket

143722793
225249: RNCC: 3 | RNVC: 2
225249: RNCC: 5 | RNVC: 9

1 Sep 1981

5340-14-541-0681
Mounting Bracket

145410681
10672119000: RNCC: 3 | RNVC: 2

13 May 2004

5340-14-394-6421
Runner

143946421
79109614: RNCC: 3 | RNVC: 2
79109614: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-517-8816
Bridge Clamp

145178816
446002130000: RNCC: 3 | RNVC: 2

17 Jan 2000

5340-14-442-3135
Angle Bracket

144423135
20288585: RNCC: 3 | RNVC: 2

10 Oct 1990

5340-14-479-9396
Retaining Strap

144799396
T1083AA34: RNCC: 3 | RNVC: 2
451428: RNCC: 5 | RNVC: 9
T1083AA34: RNCC: 5 | RNVC: 9

14 Feb 1996

5340-14-504-6063
Metal Grille

145046063
GEACA41: RNCC: 3 | RNVC: 2
0391600252: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-14-500-8209
Section Block Clamp

145008209
E64009998079: RNCC: 3 | RNVC: 2
F300 0T 024 8411: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-479-6937
Mounting Bracket

144796937
700765: RNCC: 3 | RNVC: 2

31 Jan 1996

5340-14-345-2855
Access Cover

143452855
012063002802: RNCC: 3 | RNVC: 2
012063002802: RNCC: 5 | RNVC: 2

5 Oct 1977

5340-14-395-0453
Access Cover

143950453
0298181020: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-341-1233
Anchor Strap

143411233
002520080P: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-433-8458
Anchor Strap

144338458
023692E: RNCC: 3 | RNVC: 2

16 Aug 1989

5340-14-425-8877
Access Cover

144258877
059092Y01TRA: RNCC: 3 | RNVC: 2
059092Y: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-14-505-3811
Runner

145053811
10214058: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-375-8172
Access Cover

143758172
16316625: RNCC: 3 | RNVC: 2
16316625: RNCC: 5 | RNVC: 9
16316625: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-447-2442
Rigid Caster

144472442
063U02-322203-0000: RNCC: 3 | RNVC: 2
0911520S00: RNCC: 5 | RNVC: 2

15 May 1991

5340-14-437-2461
Access Cover

144372461
86030083: RNCC: 3 | RNVC: 2
A86030083: RNCC: 5 | RNVC: 2
5000815086: RNCC: 5 | RNVC: 2

24 Jan 1990

5340-14-518-0424
Mounting Plate

145180424
03184: RNCC: 3 | RNVC: 2

21 Jan 2000

5340-14-408-7467
Clamping Catch

144087467
16-7-3399: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-438-7554
Mounting Plate

144387554
TB2020113: RNCC: 3 | RNVC: 2

4 Apr 1990

5340-14-329-6260
Retaining Strap

143296260
F702-119: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-518-9916
Mounting Bracket

145189916
707288: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-441-3380
Angle Bracket

144413380
78701-055A: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-341-1874
Angle Bracket

143411874
M3C211-55-34: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-333-0779
Control Rod

143330779
NO PRIMARY REF14-333-0779: RNCC: 3 | RNVC: 2
22216: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-533-8800
Cover Strip

145338800
SZ42.250.161: RNCC: 3 | RNVC: 2
42-250-161: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-379-2771
Bumper

143792771
C3526-010F8: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-290-8313
Loop Clamp

142908313
3100-361: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-364-4990
Retaining Strap

143644990
NO PRIMARY REF14-364-4990: RNCC: 3 | RNVC: 2
Z46334: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-433-3735
Loop Clamp

144333735
DLT059027: RNCC: 3 | RNVC: 2

24 Jul 1989

5340-14-453-2069
Detent Plunger

144532069
5017-850-000: RNCC: 3 | RNVC: 2

10 Feb 1992

5340-14-496-9564
Detent Plunger

144969564
4E4-10011-000: RNCC: 3 | RNVC: 2
4E4-10011-000: RNCC: 5 | RNVC: 9
F300 0T 022 3163: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-530-6220
Bail Handle

145306220
641585: RNCC: 3 | RNVC: 2
641585: RNCC: 5 | RNVC: 9

26 Jun 2002

5340-14-523-2873
Retaining Band

145232873
RA1M701926341: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-507-6830
Mounting Bracket

145076830
10391808: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-554-1453
Mounting Plate

145541453
82378755000: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-362-2279
Angle Bracket

143622279
GA59003: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-522-4414
Protection Bellows

145224414
10605948: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-14-412-4761
Bow Handle

144124761
244070: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-14-279-6397
Rim Lock

142796397
16DD0RE4262CHR0ME40MM: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-431-7578
Bumper

144317578
39257011: RNCC: 3 | RNVC: 2
39257011: RNCC: 3 | RNVC: 9

10 May 1989

5340-14-442-2134
Access Cover

144422134
8815471301: RNCC: 3 | RNVC: 2
89451628: RNCC: 5 | RNVC: 2

3 Oct 1990

5340-14-509-7450
Plug Button

145097450
56089472: RNCC: 3 | RNVC: 2

4 Nov 1998

5340-14-406-5167
Rod End Clevis

144065167
36136CC16B37: RNCC: 2 | RNVC: 2

8 Jan 1986

5340-14-427-4772
Plug Button

144274772
OB4: RNCC: 3 | RNVC: 2

20 Oct 1988

5340-14-552-1039
Access Cover

145521039
0249157870: RNCC: 3 | RNVC: 2

27 Nov 2006

5340-14-430-3069
Access Cover

144303069
39533902: RNCC: 3 | RNVC: 2
39533902: RNCC: 5 | RNVC: 9

15 Mar 1989

5340-14-530-3238
Surface Bolt

145303238
39764118: RNCC: 3 | RNVC: 2

29 May 2002

5340-14-401-6090
Rod End Clevis

144016090
TB30-27302-100: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-480-8289
Mounting Bracket

144808289
702764: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-14-222-9949
Rod End Clevis

142229949
D45046: RNCC: 3 | RNVC: 2
0942490011: RNCC: 5 | RNVC: 2
0942490011: RNCC: 5 | RNVC: 9
942490011: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-520-7159
Bumper

145207159
46239875: RNCC: 3 | RNVC: 2

5 Jun 2000

5340-14-455-0987
Locking Stay

144550987
21400B21539: RNCC: 3 | RNVC: 2

1 May 1992

5340-14-523-2346
Access Cover

145232346
P046789: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-372-2956
Control Rod

143722956
1638940008: RNCC: 3 | RNVC: 2
16389400: RNCC: 5 | RNVC: 2
7701005615: RNCC: 5 | RNVC: 2
7701005615: RNCC: 5 | RNVC: 9

1 Sep 1981

5340-14-429-0304
Access Cover

144290304
0177697230: RNCC: 3 | RNVC: 2

4 Jan 1989

5340-14-505-3969
Rod End Clevis

145053969
12017012: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-404-7386
Access Cover

144047386
571413: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-389-3184
Access Cover

143893184
MN505: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-416-4756
Access Cover

144164756
533302: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-14-259-6462
Rod End Clevis

142596462
BFC15030: RNCC: 3 | RNVC: 2
BY148A15030: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-546-4950
Access Cover

145464950
61225049AA: RNCC: 3 | RNVC: 2

8 Jul 2005

5340-14-436-4455
Access Cover

144364455
0298567250: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-544-1928
Utility Access Door

145441928
1909458: RNCC: 3 | RNVC: 2

7 Jan 2005

5340-14-379-0195
Anchor Strap

143790195
2206-911A524: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-377-5828
Access Cover

143775828
16787667: RNCC: 3 | RNVC: 2
16787667: RNCC: 5 | RNVC: 9
16787667: RNCC: 5 | RNVC: 9

10 Jun 1982

5340-14-456-5379
Plug Button

144565379
16011071N: RNCC: 3 | RNVC: 2

8 Jul 1992

5340-14-392-8846
Access Cover

143928846
611115520: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-375-8267
Access Cover

143758267
16559246: RNCC: 3 | RNVC: 2
16559246: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-500-7151
Access Cover

145007151
10294738: RNCC: 3 | RNVC: 2
F300 0T 024 7344: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-317-0337
Plug Button

143170337
0249600220: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-421-7042
Rod End Clevis

144217042
8811980551: RNCC: 3 | RNVC: 2

27 Jan 1988

5340-14-421-1419
Rod End Clevis

144211419
09053624: RNCC: 3 | RNVC: 2

6 Jan 1988

5340-14-517-3929
Bridge Clamp

145173929
20010769: RNCC: 3 | RNVC: 2

8 Dec 1999

5340-14-398-8923
Access Cover

143988923
22448058: RNCC: 3 | RNVC: 2
22448058: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-520-0712
Access Cover

145200712
47134922: RNCC: 3 | RNVC: 2

10 May 2000

5340-14-501-6667
Access Cover

145016667
45283368: RNCC: 3 | RNVC: 2
45283368: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-305-7970
Access Cover

143057970
4099DET1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-472-3243
Mounting Bracket

144723243
DHV1266: RNCC: 3 | RNVC: 2

19 Oct 1994

5340-14-421-9018
Access Cover

144219018
49780911: RNCC: 3 | RNVC: 2
41255130: RNCC: 5 | RNVC: 2

9 Feb 1988

5340-14-476-3583
Access Cover

144763583
10027973: RNCC: 3 | RNVC: 2

7 Jun 1995

5340-14-332-1258
Mending Plate

143321258
413-07283-000: RNCC: 3 | RNVC: 2
413-7283: RNCC: 5 | RNVC: 2
413-07283-000: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-504-7054
Access Cover

145047054
XB2BH1423090: RNCC: 3 | RNVC: 2
5010149696: RNCC: 5 | RNVC: 2

27 Feb 1998

5340-14-354-3301
Access Cover

143543301
161575: RNCC: 3 | RNVC: 2

31 Jan 1979

5340-14-505-1878
Protection Bellows

145051878
443 738 IND.2: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-349-1036
Rigid Caster

143491036
N508-3080BXL: RNCC: 3 | RNVC: 9
MPRN508-3080BXL: RNCC: 5 | RNVC: 9

19 Apr 1978

5340-14-383-6723
Access Cover

143836723
2097-16: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-455-4399
Rod End Clevis

144554399
044U01-20022P: RNCC: 3 | RNVC: 2
0904435W00: RNCC: 5 | RNVC: 2
89424749: RNCC: 5 | RNVC: 2

21 May 1992

5340-14-396-3950
Hand Crank Arm

143963950
IF032-605: RNCC: 3 | RNVC: 9

27 Nov 1984

5340-14-460-5262
Rim Latch

144605262
1525: RNCC: 3 | RNVC: 2
3141Q8: RNCC: 5 | RNVC: 2

27 Jan 1993

5340-14-510-0385
Loop Clamp

145100385
NO PRIMARY REF14-510-0385: RNCC: 3 | RNVC: 2
M1-585012: RNCC: 5 | RNVC: 9
5340AA2035666: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-350-2731
Retaining Strap

143502731
53NC402563: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-546-7321
Mounting Bracket

145467321
S258A4012108: RNCC: 3 | RNVC: 2

9 Aug 2005

5340-14-525-8431
Access Cover

145258431
N135043: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-523-6730
Access Cover

145236730
J914868: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-430-7218
Rod End Clevis

144307218
PM1A761031063: RNCC: 3 | RNVC: 2
PM1A761031063: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-475-3052
Mounting Plate

144753052
45254659: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-14-352-3102
Mending Plate

143523102
420154: RNCC: 3 | RNVC: 2
420154: RNCC: 5 | RNVC: 9

16 Oct 1978

5340-14-516-6489
Access Cover

145166489
46943315: RNCC: 3 | RNVC: 2
46943315: RNCC: 5 | RNVC: 9

8 Oct 1999

5340-14-459-1398
Rod End Clevis

144591398
8958012422: RNCC: 3 | RNVC: 2
5000802139: RNCC: 5 | RNVC: 2
8958012422: RNCC: 5 | RNVC: 2

19 Nov 1992

5340-14-382-9469
Access Cover

143829469
43535: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-381-4030
Anchor Strap

143814030
227598: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-432-7421
Access Cover

144327421
405407K: RNCC: 3 | RNVC: 2

21 Jun 1989

5340-14-489-3154
Mounting Bracket

144893154
452-01885-300: RNCC: 3 | RNVC: 2
452-01885-300: RNCC: 5 | RNVC: 2
F300 0T 022 3121: RNCC: 6 | RNVC: 9

9 Jul 1997

5340-14-533-7456
Angle Bracket

145337456
168E895-00: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-14-311-6788
Angle Bracket

143116788
319A88-00-223: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-281-3088
Retaining Strap

142813088
502-515-007-0: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-566-6682
Utility Resilient Mount

145666682
V5652: RNCC: 3 | RNVC: 2

6 Dec 2010

5340-14-355-2909
Loop Clamp

143552909
F01872: RNCC: 3 | RNVC: 9

19 Mar 1979

5340-14-526-1884
Angle Bracket

145261884
46138295: RNCC: 3 | RNVC: 2

9 Jul 2001

5340-14-548-2708
Access Cover

145482708
71224007: RNCC: 3 | RNVC: 2
71224007: RNCC: 5 | RNVC: 2
5000989013: RNCC: 5 | RNVC: 2

21 Dec 2005

5340-14-545-7584
Rod End Clevis

145457584
212778: RNCC: 3 | RNVC: 2

10 May 2005

5340-14-425-5460
Access Cover

144255460
20779158: RNCC: 3 | RNVC: 2

7 Jul 1988

5340-14-457-2478
Mounting Plate

144572478
402368A-SG10137-Z2CND17-12: RNCC: 3 | RNVC: 2
402368A: RNCC: 5 | RNVC: 1

20 Aug 1992

5340-14-489-4936
Detent Plunger

144894936
332A22-1602-20: RNCC: 3 | RNVC: 2

28 Jul 1997

5340-14-352-0224
Retaining Band

143520224
341A55-1144-0451: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-529-0730
Rigid Caster

145290730
TF2BA050-77L: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-14-434-4638
Rod End Clevis

144344638
PM1A333190015: RNCC: 3 | RNVC: 2
PM1A333190015: RNCC: 5 | RNVC: 2

20 Sep 1989

5340-14-430-9221
Angle Bracket

144309221
160H732611-01: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-14-343-5117
Turnbuckle Body

143435117
60-105: RNCC: 3 | RNVC: 2
85-689-3026: RNCC: 6 | RNVC: 9

16 Jun 1977

5340-14-331-0172
Access Cover

143310172
T20-13C239: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-522-9599
Mounting Bracket

145229599
ST159-2M571P14: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-14-446-0823
Anchor Strap

144460823
007853035P: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-386-7362
Rod End Clevis

143867362
64-633-0022: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-291-3078
Doorknob

142913078
134-304: RNCC: 3 | RNVC: 9

1 Jan 1972

5340-14-436-2265
Rod End Clevis

144362265
DA2C230722707: RNCC: 3 | RNVC: 2

6 Dec 1989

5340-14-405-7681
Anchor Strap

144057681
339FB1: RNCC: 3 | RNVC: 2

4 Dec 1985

5340-14-535-2265
Mounting Bracket

145352265
6401LTF131: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-348-9019
Retaining Strap

143489019
052856: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-14-531-2406
Webbing Strap

145312406
F1264715: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-366-0974
Access Cover

143660974
570224: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-364-4878
Anchor Strap

143644878
33014: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-14-288-8642
Runner

142888642
22293328: RNCC: 3 | RNVC: 2
22293328: RNCC: 3 | RNVC: 9

1 Jan 1972

5340-14-526-5142
Access Cover

145265142
D66721: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-450-3313
Access Cover

144503313
103111572104: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-043-1274
Rod End Clevis

140431274
069U20-696391D: RNCC: 3 | RNVC: 2

10 Apr 1984

5340-14-487-0673
Rod End Clevis

144870673
101-136-1T: RNCC: 3 | RNVC: 2

2 Apr 1997

5340-14-444-7668
Access Cover

144447668
5995749: RNCC: 3 | RNVC: 2

21 Jan 1991

5340-14-397-4148
Anchor Strap

143974148
5000901187: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-438-0187
Anchor Strap

144380187
F00059983: RNCC: 3 | RNVC: 2
F00059983: RNCC: 5 | RNVC: 9

6 Mar 1990

5340-14-358-6009
Loop Clamp

143586009
51213105026: RNCC: 3 | RNVC: 2
20G26: RNCC: 5 | RNVC: 2

7 Sep 1979

5340-14-500-8120
Mounting Bracket

145008120
01136702: RNCC: 3 | RNVC: 2
F300 0T 024 8320: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-548-4913
Loop Clamp

145484913
5010610302: RNCC: 3 | RNVC: 2

23 Jan 2006

5340-14-479-6833
Runner

144796833
74128: RNCC: 3 | RNVC: 2

31 Jan 1996

5340-14-502-5055
Mounting Bracket

145025055
5000447969: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-368-3742
Bumper

143683742
F116603: RNCC: 3 | RNVC: 2
89254998: RNCC: 5 | RNVC: 2
F116603: RNCC: 6 | RNVC: 9

20 Feb 1981

5340-14-495-3048
Mounting Bracket

144953048
TB1020101F308: RNCC: 3 | RNVC: 2
F300 0T 018 9942: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-378-6121
Retaining Strap

143786121
19304313: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-487-5590
Turnbuckle Body

144875590
43905DG0583D: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-257-7550
Retaining Strap

142577550
6009: RNCC: 3 | RNVC: 9
6009: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-524-3557
Mounting Plate

145243557
SD001PD021807: RNCC: 3 | RNVC: 2
SD001P021807: RNCC: 5 | RNVC: 2

14 Mar 2001

5340-14-379-0722
Access Cover

143790722
9803J32-2000-00: RNCC: 3 | RNVC: 2
9803360A32-2000-00: RNCC: 5 | RNVC: 2

6 Sep 1982

5340-14-204-4107
Rod End Clevis

142044107
3130S73-12-511: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-433-8105
Corner Brace

144338105
330A68-3330-24: RNCC: 3 | RNVC: 2

9 Aug 1989

5340-14-330-0594
Mounting Plate

143300594
9125857000: RNCC: 3 | RNVC: 2
9125857000: RNCC: 5 | RNVC: 9
85-509-4931: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-403-4797
Angle Bracket

144034797
NO PRIMARY REF14-403-4797: RNCC: 3 | RNVC: 2
P4H018119-00: RNCC: 5 | RNVC: 9

21 Aug 1985

5340-14-508-7711
Access Cover

145087711
BS2842.126.00.000: RNCC: 3 | RNVC: 2
BS2842-126-00-000: RNCC: 5 | RNVC: 9

30 Sep 1998

5340-14-509-7864
Plug Button

145097864
NO PRIMARY REF14-509-7864: RNCC: 3 | RNVC: 2
625-1581-001: RNCC: 5 | RNVC: 9
5340AA0009951: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-540-1542
Flush Lock

145401542
F00116851: RNCC: 3 | RNVC: 2
F00116851: RNCC: 5 | RNVC: 2

11 Mar 2004

5340-14-413-6226
Loop Clamp

144136226
MS21919DG10: RNCC: 3 | RNVC: 2
91303923: RNCC: 5 | RNVC: 2
0146346L00: RNCC: 5 | RNVC: 2
00-565-0004: RNCC: 6 | RNVC: 9

6 Jan 1987

5340-14-488-7282
Access Cover

144887282
31500C2253487U00: RNCC: 3 | RNVC: 2
1004056B00: RNCC: 5 | RNVC: 2

28 May 1997

5340-14-462-0270
Mounting Plate

144620270
A81517-4: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-554-8192
Access Cover

145548192
19227900: RNCC: 3 | RNVC: 2

29 Aug 2007

5340-14-542-7608
Utility Access Door

145427608
56697226: RNCC: 3 | RNVC: 2

13 Aug 2004

5340-14-533-6329
Access Cover

145336329
D125009: RNCC: 3 | RNVC: 2

12 Feb 2003

5340-14-479-1272
Bumper

144791272
511645: RNCC: 3 | RNVC: 2

13 Dec 1995

5340-14-413-9770
Access Cover

144139770
ST406M41G70: RNCC: 3 | RNVC: 2
BJQM41G70: RNCC: 5 | RNVC: 2

22 Jan 1987

5340-14-400-5708
Access Cover

144005708
372766: RNCC: 3 | RNVC: 2
372766: RNCC: 5 | RNVC: 9

8 May 1985

5340-14-271-5597
Access Cover

142715597
0157080060: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-530-5209
Access Cover

145305209
79092193: RNCC: 3 | RNVC: 2

18 Jun 2002

5340-14-497-9567
Flush Lock

144979567
42888: RNCC: 3 | RNVC: 2
3303430428886: RNCC: 5 | RNVC: 2
77090992: RNCC: 5 | RNVC: 2
91683844: RNCC: 5 | RNVC: 2

29 Oct 1997

5340-14-352-6453
Rod End Connector

143526453
112497: RNCC: 3 | RNVC: 2
BFCSAMM112497: RNCC: 5 | RNVC: 2

14 Nov 1978

5340-14-372-3586
Butt Hinge

143723586
1715-17: RNCC: 3 | RNVC: 2
1715: RNCC: 5 | RNVC: 2
254FDN: RNCC: 5 | RNVC: 9

1 Sep 1981

5340-14-508-6287
Mounting Bracket

145086287
009484210P: RNCC: 3 | RNVC: 2

23 Sep 1998

5340-14-537-7339
Access Cover

145377339
PCS228: RNCC: 3 | RNVC: 2

19 Nov 2003

5340-14-532-6737
Utility Access Door

145326737
19221451: RNCC: 3 | RNVC: 2

27 Nov 2002

5340-14-237-5249
Access Cover

142375249
70879716: RNCC: 3 | RNVC: 2
804B221: RNCC: 5 | RNVC: 2
70879716: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-511-6238
Pipe Hanger

145116238
78732-050-027B: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-530-6875
Cover Strip

145306875
T524A2001540: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-548-6267
Angle Bracket

145486267
RA1M702506043A1: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-479-2683
Mounting Plate

144792683
400-354-63: RNCC: 3 | RNVC: 2
00008466: RNCC: 5 | RNVC: 2

3 Jan 1996

5340-14-316-5671
Retaining Clip

143165671
E4P840-20-01: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-439-1802
Webbing Strap

144391802
4801C2-50: RNCC: 3 | RNVC: 2
4801C2-50: RNCC: 3 | RNVC: 9
91441805: RNCC: 5 | RNVC: 2

25 Apr 1990

5340-14-360-1643
Angle Bracket

143601643
A11A221178030A1: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-394-6413
Mounting Plate

143946413
79107244: RNCC: 3 | RNVC: 2
79107244: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-517-5809
Angle Bracket

145175809
RA1M701202350: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-222-9956
Rod End Clevis

142229956
STD40: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-342-5420
Butt Hinge

143425420
A11A211108026: RNCC: 3 | RNVC: 2

16 May 1977

5340-14-530-6869
Cover Strip

145306869
T524A2001514: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-231-1148
Access Cover

142311148
62073: RNCC: 3 | RNVC: 2
P062073: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-527-4358
Runner

145274358
V107235: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-534-0483
Loop Clamp

145340483
11313109010: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-449-6457
Synchro Clamp

144496457
1217211P004: RNCC: 3 | RNVC: 2

28 Aug 1991

5340-14-400-0220
Bumper

144000220
608527: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-509-2344
Mounting Plate

145092344
MECZ6066: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-511-7462
Angle Bracket

145117462
T700A212005100200: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-14-382-9910
Runner

143829910
005277986P: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-403-9284
Angle Bracket

144039284
132170: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-226-6329
Loop Clamp

142266329
1701S: RNCC: 3 | RNVC: 9
1701: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-437-6147
Plate Spacer

144376147
PM1A113230014: RNCC: 3 | RNVC: 2
PM1A113230014: RNCC: 5 | RNVC: 2

7 Feb 1990

5340-14-553-7587
Access Cover

145537587
107 320: RNCC: 3 | RNVC: 2
107 320: RNCC: 3 | RNVC: 2

21 May 2007

5340-14-413-9061
Retaining Strap

144139061
189929: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-500-8564
Loop Clamp

145008564
150000220: RNCC: 3 | RNVC: 2
F300 0T 024 8767: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-413-1674
Access Cover

144131674
412702040203: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-349-8868
Webbing Strap

143498868
002878013P: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-540-1957
Mounting Bracket

145401957
9600439380: RNCC: 3 | RNVC: 2

11 Mar 2004

5340-14-301-8707
Access Cover

143018707
701EQ0096REP2: RNCC: 3 | RNVC: 2
701EQ096REP2: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-506-9205
Access Cover

145069205
30344068T: RNCC: 3 | RNVC: 2

27 May 1998

5340-14-451-2120
Rod End Clevis

144512120
PM1A379626032: RNCC: 3 | RNVC: 2
PM1A379626032: RNCC: 5 | RNVC: 2

6 Nov 1991

5340-14-543-4294
Mounting Bracket

145434294
8046222K00: RNCC: 3 | RNVC: 2

28 Oct 2004

5340-14-451-8928
Swivel Caster

144518928
8642650: RNCC: 3 | RNVC: 2

11 Dec 1991

5340-14-533-5438
Mounting Plate

145335438
F1262066: RNCC: 3 | RNVC: 2

10 Feb 2003

5340-14-544-8075
Access Cover

145448075
F00287285: RNCC: 3 | RNVC: 2
F00287285: RNCC: 5 | RNVC: 9

24 Feb 2005

5340-14-384-6850
Access Cover

143846850
16761358: RNCC: 3 | RNVC: 2
16761358: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-338-7940
Anchor Strap

143387940
164-708: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-392-5398
Rod End Clevis

143925398
A11A226110101: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-460-0026
Access Cover

144600026
39143863: RNCC: 3 | RNVC: 2

7 Jan 1993

5340-14-385-4031
Rod End Clevis

143854031
0285327020: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-398-8765
Anchor Strap

143988765
400478: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-391-6022
Access Cover

143916022
045S03-576087K: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-452-8362
Angle Bracket

144528362
29389236: RNCC: 3 | RNVC: 9

22 Jan 1992

5340-14-541-5397
Angle Bracket

145415397
1092968: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-549-0509
Angle Bracket

145490509
RA1B703247531N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-385-1062
Retaining Band

143851062
M04VW3021347005: RNCC: 3 | RNVC: 2
M04VW3021347002: RNCC: 5 | RNVC: 2

26 Jul 1983

5340-14-512-7422
Pipe Hanger

145127422
800039368: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-522-9799
Mounting Bracket

145229799
0319787050: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-14-503-5862
Block Clamp

145035862
96183088: RNCC: 3 | RNVC: 2
DB9P88P130011: RNCC: 5 | RNVC: 2

21 Jan 1998

5340-14-526-6792
Strap Fastener Loop

145266792
954031: RNCC: 3 | RNVC: 2

22 Aug 2001

5340-14-535-4715
Pipe Hanger

145354715
3450000012: RNCC: 3 | RNVC: 2
5010260152: RNCC: 5 | RNVC: 2

27 May 2003

5340-14-472-7763
Mounting Bracket

144727763
0320757290: RNCC: 3 | RNVC: 2

9 Nov 1994

5340-14-551-5109
Mounting Bracket

145515109
RA1B701308230N1: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-417-9671
Anchor Strap

144179671
412802010003: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-552-0645
Access Cover

145520645
0249929060: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-14-555-9492
Webbing Strap

145559492
714687: RNCC: 3 | RNVC: 2

14 Jan 2008

5340-14-394-7716
Mounting Plate

143947716
S8002LS025F11F82: RNCC: 3 | RNVC: 2

28 Aug 1984

5340-14-391-8698
Loop Clamp

143918698
51300005015: RNCC: 3 | RNVC: 2
11N15: RNCC: 5 | RNVC: 2
11N15: RNCC: 5 | RNVC: 2
9562811180: RNCC: 5 | RNVC: 2
11N15: RNCC: 5 | RNVC: 2

21 Mar 1984

5340-14-295-2075
Angle Bracket

142952075
100271-102242: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-382-6776
Mounting Plate

143826776
8810007109: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-408-0309
Mounting Plate

144080309
20724463-1: RNCC: 3 | RNVC: 2
724463: RNCC: 5 | RNVC: 2

19 Mar 1986

5340-14-455-7269
Mounting Plate

144557269
624205: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-518-0197
Angle Bracket

145180197
5010117227: RNCC: 3 | RNVC: 2

21 Jan 2000

5340-14-279-2358
Angle Bracket

142792358
42241: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-346-8789
Access Cover

143468789
26425850: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-14-466-6680
Access Cover

144666680
GTS5611033A1V: RNCC: 3 | RNVC: 2
GTS5611033A1V: RNCC: 5 | RNVC: 2

23 Nov 1993

5340-14-538-9783
Loop Clamp

145389783
NGM0053824309513: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-519-6599
Runner

145196599
5010399512: RNCC: 3 | RNVC: 2

29 Mar 2000

5340-14-464-5419
Bow Handle

144645419
19-1-3672: RNCC: 3 | RNVC: 2

6 Aug 1993

5340-14-497-4972
Mounting Bracket

144974972
1069888X00: RNCC: 3 | RNVC: 2
F300 0T 023 2714: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-310-2310
Access Cover

143102310
77623UE10Z1-ANY: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-531-2421
Synchro Clamp

145312421
L7000E100H10500: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-540-8386
Angle Bracket

145408386
19225627: RNCC: 3 | RNVC: 2

23 Apr 2004

5340-14-525-4967
Rod End Connector

145254967
Y010003: RNCC: 3 | RNVC: 2

6 Jun 2001

5340-14-544-2873
Mounting Bracket

145442873
AMPC VDSD E213305A: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-14-479-3513
Butt Hinge

144793513
FH01PD210007: RNCC: 3 | RNVC: 9

10 Jan 1996

5340-14-455-5064
Control Rod

144555064
MC033REP12: RNCC: 3 | RNVC: 2
MC3312: RNCC: 5 | RNVC: 2
RAR3500: RNCC: 5 | RNVC: 2

26 May 1992

5340-14-529-2784
Retaining Strap

145292784
1031040: RNCC: 3 | RNVC: 2
1031040: RNCC: 5 | RNVC: 2
F300 0T 023 1426: RNCC: 6 | RNVC: 9

20 Mar 2002

5340-14-385-3900
Pipe Hanger

143853900
0308860030: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-433-9018
Mounting Plate

144339018
022407A: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-14-553-2859
Mounting Bracket

145532859
TTMH1109 BB11: RNCC: 3 | RNVC: 2

20 Mar 2007

5340-14-489-8650
Threaded Rod End

144898650
BOUTS00005: RNCC: 3 | RNVC: 2
BOUT00005: RNCC: 5 | RNVC: 9

27 Aug 1997

5340-14-549-8521
Mounting Bracket

145498521
2092291: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-495-3913
Mounting Bracket

144953913
10321791: RNCC: 3 | RNVC: 9
F300 0T 019 1845: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-560-7669
Utility Access Door

145607669
82026536000: RNCC: 3 | RNVC: 2

25 May 2009

5340-14-041-3304
Loop Clamp

140413304
16347276: RNCC: 3 | RNVC: 2
16347276: RNCC: 5 | RNVC: 2
16347276: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-529-4033
Mounting Bracket

145294033
700499: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-031-1743
Angle Bracket

140311743
VDP5548: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-502-8043
Retaining Clip

145028043
8T1885: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-400-0820
Retaining Band

144000820
211755: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-266-0933
Butt Hinge

142660933
501335: RNCC: 3 | RNVC: 2
302: RNCC: 3 | RNVC: 9
50703F16: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-509-2994
Clamping Catch

145092994
F130045: RNCC: 3 | RNVC: 2

27 Oct 1998

5340-14-533-2669
Mounting Plate

145332669
V118727: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-502-2502
Compression Cup

145022502
17193: RNCC: 3 | RNVC: 2

2 Dec 1997

5340-14-399-1191
Leaf Spring

143991191
5000714682: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-536-1768
Butt Hinge

145361768
F135150B: RNCC: 3 | RNVC: 2

11 Jul 2003

5340-14-031-8823
Runner

140318823
573905084: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-287-1542
Retaining Strap

142871542
380915: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-522-6961
Mounting Bracket

145226961
01248014: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-14-508-1241
Bumper

145081241
10068641: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-545-1910
Mounting Bracket

145451910
22355-9003: RNCC: 3 | RNVC: 2

23 Mar 2005

5340-14-502-3105
Mounting Bracket

145023105
10391939: RNCC: 3 | RNVC: 2

9 Dec 1997

5340-14-472-1040
Buckle

144721040
16942: RNCC: 3 | RNVC: 2

6 Oct 1994

5340-14-385-1981
Rigid Caster

143851981
73456: RNCC: 3 | RNVC: 9
73456: RNCC: 5 | RNVC: 2

26 Jul 1983

5340-14-413-6916
Armature Stop

144136916
TRSB01P057452: RNCC: 3 | RNVC: 2

15 Jan 1987

5340-14-548-1277
Mounting Bracket

145481277
5010467103: RNCC: 3 | RNVC: 2

12 Dec 2005

5340-14-512-3024
Mounting Plate

145123024
2021485V: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-14-394-9374
Mounting Plate

143949374
20257685: RNCC: 3 | RNVC: 2
20257685: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-384-7180
Mounting Plate

143847180
16928531: RNCC: 3 | RNVC: 2
16928531: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-550-8713
Bumper

145508713
521650: RNCC: 3 | RNVC: 2

25 Jul 2006

5340-14-548-6208
Angle Bracket

145486208
RA1B702606160A1N1: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-377-6188
Bumper

143776188
66485: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-553-0368
Angle Bracket

145530368
0039899: RNCC: 3 | RNVC: 2

23 Feb 2007

5340-14-443-5914
Loop Clamp

144435914
0301537350: RNCC: 3 | RNVC: 2

28 Nov 1990

5340-14-549-9261
Angle Bracket

145499261
2092544: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-361-1749
Angle Bracket

143611749
BAZ94377: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-356-4863
Angle Bracket

143564863
PATTETA3P: RNCC: 3 | RNVC: 2

15 May 1979

5340-14-286-3492
Loop Clamp

142863492
51413105020: RNCC: 3 | RNVC: 2
28G20: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-489-8284
Handle Grip

144898284
E5270378: RNCC: 3 | RNVC: 9

22 Aug 1997

5340-14-478-1088
Mounting Plate

144781088
RA1M114010339: RNCC: 3 | RNVC: 2

11 Oct 1995

5340-14-334-6246
Angle Bracket

143346246
79047804: RNCC: 3 | RNVC: 2
79047804: RNCC: 5 | RNVC: 9

1 Jun 1976

5340-14-460-9975
Mending Plate

144609975
5000995284: RNCC: 3 | RNVC: 2

17 Feb 1993

5340-14-422-7961
Mounting Bracket

144227961
23122100102: RNCC: 3 | RNVC: 2
89415214: RNCC: 5 | RNVC: 2

17 Mar 1988

5340-14-466-5315
Mounting Bracket

144665315
45284871: RNCC: 3 | RNVC: 9

15 Nov 1993

5340-14-553-2802
Mounting Bracket

145532802
TTMH1109 BB12: RNCC: 3 | RNVC: 2

20 Mar 2007

5340-14-444-3055
Mounting Plate

144443055
2404109: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-14-536-6764
Mounting Bracket

145366764
47177509: RNCC: 3 | RNVC: 2

10 Sep 2003

5340-14-552-4146
Angle Bracket

145524146
82159658000: RNCC: 3 | RNVC: 2

20 Dec 2006

5340-14-490-0873
Mounting Bracket

144900873
29400183: RNCC: 3 | RNVC: 2

10 Sep 1997

5340-14-538-7765
Handwheel

145387765
NGM0011040330217: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-401-2825
Mounting Plate

144012825
611764: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-386-9207
Butt Hinge

143869207
5340CECHARNIEREACIERR0ULE90X45: RNCC: 2 | RNVC: 2

24 Aug 1983

5340-14-385-0917
Loop Clamp

143850917
M4DW1301716602: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-287-2542
Retaining Strap

142872542
341A27-1241-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-526-3295
Mounting Bracket

145263295
010169035P: RNCC: 3 | RNVC: 2

20 Jul 2001

5340-14-031-8240
Rim Lock Set

140318240
22544E2: RNCC: 3 | RNVC: 2
5451522: RNCC: 5 | RNVC: 2
5451522Z: RNCC: 5 | RNVC: 2

5 Jul 1980

5340-14-435-9651
Loop Holder

144359651
332A25-1067-13: RNCC: 3 | RNVC: 2

29 Nov 1989

5340-14-322-0456
Clamping Catch

143220456
87123: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-042-8142
Retaining Strap

140428142
F116061: RNCC: 3 | RNVC: 2
89254950: RNCC: 5 | RNVC: 2

11 Dec 1980

5340-14-454-8617
Bail Handle

144548617
319042: RNCC: 3 | RNVC: 2
319042: RNCC: 5 | RNVC: 9

24 Apr 1992

5340-14-241-5564
Bumper

142415564
032A030: RNCC: 3 | RNVC: 2
032A030: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-481-6559
Synchro Clamp

144816559
79117090: RNCC: 3 | RNVC: 2
79117090: RNCC: 5 | RNVC: 9

23 May 1996

5340-14-506-9202
Mounting Plate

145069202
30312770C: RNCC: 3 | RNVC: 2

27 May 1998

5340-14-549-0860
Cover Strip

145490860
RA1M705232231N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-502-5984
Mounting Bracket

145025984
5010036426: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-501-9025
Runner

145019025
P2001103: RNCC: 3 | RNVC: 2
SDMP2001103: RNCC: 5 | RNVC: 9

19 Nov 1997

5340-14-343-1168
Angle Bracket

143431168
311097: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-329-0446
Expansion Plug

143290446
0000147245: RNCC: 3 | RNVC: 2
0000147245: RNCC: 5 | RNVC: 9
147245: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-366-8386
Angle Bracket

143668386
A11A762030060: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-502-7738
Lock Bolt

145027738
6V5124: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-384-2875
Sliding Door Track

143842875
569951: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-526-2396
Mounting Bracket

145262396
H125282: RNCC: 3 | RNVC: 2

11 Jul 2001

5340-14-497-1890
Loop Clamp

144971890
95001345: RNCC: 3 | RNVC: 2
F300 0T 022 8006: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-503-8912
Blank Panel

145038912
GFACA26: RNCC: 3 | RNVC: 2
F0023390: RNCC: 5 | RNVC: 9

4 Feb 1998

5340-14-553-3421
Bumper

145533421
06 08135 106: RNCC: 3 | RNVC: 2

26 Mar 2007

5340-14-546-3018
Mounting Plate

145463018
10606331: RNCC: 3 | RNVC: 2

22 Jun 2005

5340-14-410-1863
Mounting Plate

144101863
6105AABRIDEMN200: RNCC: 2 | RNVC: 2
RAR4900: RNCC: 5 | RNVC: 2
6105AABRIDEMN200: RNCC: 5 | RNVC: 9

16 Jun 1986

5340-14-519-0883
Mounting Bracket

145190883
1SH41720142: RNCC: 3 | RNVC: 2

7 Mar 2000

5340-14-468-5792
Plug Button

144685792
A73062: RNCC: 3 | RNVC: 2

9 Mar 1994

5340-14-455-0606
Loop Clamp

144550606
C60812: RNCC: 3 | RNVC: 2

1 May 1992

5340-14-480-5181
Loop Clamp

144805181
31 31 06: RNCC: 3 | RNVC: 2

14 Mar 1996

5340-14-548-5433
Webbing Strap

145485433
B30 TYPE 2/1: RNCC: 3 | RNVC: 2

26 Jan 2006

5340-14-533-7325
Mounting Plate

145337325
369-2-2-2: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-14-384-7188
Rod End Connector

143847188
16764627: RNCC: 3 | RNVC: 2
16764627: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-442-9968
Access Cover

144429968
56205-900-1: RNCC: 3 | RNVC: 9

7 Nov 1990

5340-14-211-1247
Retaining Strap

142111247
22892: RNCC: 3 | RNVC: 2
22892: RNCC: 6 | RNVC: 9

1 Jan 1964

5340-14-350-5038
Strap Fastener Loop

143505038
306470: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-475-7560
Loop Clamp

144757560
P607160: RNCC: 3 | RNVC: 2

2 May 1995

5340-14-386-3479
Pipe Hanger

143863479
R6002011: RNCC: 3 | RNVC: 2

24 Aug 1983

Load More Results