What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 54 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 54 of 446

5340-14-547-2232
Loop Clamp

145472232
21236949-00: RNCC: 3 | RNVC: 2

5 Oct 2005

5340-14-271-3996
Retaining Clip

142713996
NO PRIMARY REF14-271-3996: RNCC: 3 | RNVC: 2
210617: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-547-2415
Clamping Catch

145472415
6007-U691-PC: RNCC: 3 | RNVC: 2

6 Oct 2005

5340-14-531-2316
Mounting Bracket

145312316
341A81-5065-20: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-340-3408
Access Cover

143403408
M3C705-51-810: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-377-6299
Pipe Hanger

143776299
366A61-2057-20: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-441-6140
Swivel Caster

144416140
TP4BA100-23R: RNCC: 3 | RNVC: 2

5 Sep 1990

5340-14-551-2611
Utility Access Door

145512611
730010S941-10A: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-482-8002
Bumper

144828002
24910: RNCC: 3 | RNVC: 2
9151636180: RNCC: 5 | RNVC: 2
9604553580: RNCC: 5 | RNVC: 2
5033-27: RNCC: 5 | RNVC: 2

25 Jul 1996

5340-14-413-7310
Armature Stop

144137310
10-212-100-02: RNCC: 3 | RNVC: 2

15 Jan 1987

5340-14-541-5585
Mounting Plate

145415585
8189848-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-522-9601
Mounting Bracket

145229601
ST159-2M571P18: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-14-411-2587
Loop Clamp

144112587
ASNA0021-25S19: RNCC: 3 | RNVC: 2
A0021-25S19: RNCC: 5 | RNVC: 2

6 Aug 1986

5340-14-511-3595
Section Block Clamp

145113595
F702-43-02: RNCC: 3 | RNVC: 2

16 Dec 1998

5340-14-533-8610
Cover Strip

145338610
12-250-224: RNCC: 3 | RNVC: 2
SZ12.250.224: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-337-5573
Mending Plate

143375573
A240-0-25PS: RNCC: 3 | RNVC: 9

7 Oct 1976

5340-14-471-6031
Roller Holder

144716031
312-05791-019: RNCC: 3 | RNVC: 2

7 Sep 1994

5340-14-555-9106
Access Cover

145559106
860751: RNCC: 3 | RNVC: 2
860751-7: RNCC: 3 | RNVC: 2

7 Jan 2008

5340-14-338-2046
Loop Clamp

143382046
70-115-6: RNCC: 3 | RNVC: 2
650-402-006-0: RNCC: 5 | RNVC: 2
650-402-006-0-00: RNCC: 5 | RNVC: 2
70-115-6: RNCC: 5 | RNVC: 9
70-115-6: RNCC: 5 | RNVC: 9
701156: RNCC: 5 | RNVC: 9
85-688-6571: RNCC: 6 | RNVC: 9
85-688-8968: RNCC: 6 | RNVC: 9

6 Nov 1976

5340-14-520-3352
Loop Clamp

145203352
FX13D182-202-R: RNCC: 3 | RNVC: 2
MX2142A00: RNCC: 3 | RNVC: 2
0002114: RNCC: 5 | RNVC: 2
SER0002114: RNCC: 5 | RNVC: 9

17 May 2000

5340-14-545-2723
Loop Clamp

145452723
3-2606-02-16D: RNCC: 3 | RNVC: 2

31 Mar 2005

5340-14-554-2748
Mounting Plate

145542748
J05655-01-4230P031: RNCC: 3 | RNVC: 2

18 Jun 2007

5340-14-360-3108
Plug Button

143603108
7110-063: RNCC: 3 | RNVC: 2

23 Nov 1979

5340-14-523-1160
Loop Clamp

145231160
PE27017-4AF: RNCC: 3 | RNVC: 2
BR061-XI-4: RNCC: 5 | RNVC: 2

4 Jan 2001

5340-14-303-4871
Retaining Strap

143034871
502-515-096-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-431-9391
Friction Catch

144319391
315-021: RNCC: 3 | RNVC: 2
315-021: RNCC: 5 | RNVC: 9
85-694-0793: RNCC: 6 | RNVC: 9

16 May 1989

5340-14-485-5738
Detent Plunger

144855738
332A91-3272-25: RNCC: 3 | RNVC: 2

29 Jan 1997

5340-14-502-6451
Loop Clamp

145026451
056-10800-10: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-351-4449
Loop Clamp

143514449
73-062-052: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-409-5066
Mounting Plate

144095066
2017-009: RNCC: 3 | RNVC: 2

30 Aug 2000

5340-14-503-3380
Mounting Plate

145033380
Z00093-00-0000P002: RNCC: 3 | RNVC: 2

12 Jan 1998

5340-14-361-2391
Control Rod

143612391
A25427-88: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-496-9399
Angle Bracket

144969399
120E112-00: RNCC: 3 | RNVC: 2
120E112-00: RNCC: 5 | RNVC: 9
F300 0T 022 2946: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-310-6285
Furniture Cup

143106285
15890-101002: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-362-7964
Angle Bracket

143627964
253-2-11: RNCC: 3 | RNVC: 2

19 Mar 1980

5340-14-530-9643
Rod End Clevis

145309643
341A65-7879-34: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-14-354-0675
Anchor Strap

143540675
4L97-158: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-228-6120
Retaining Clip

142286120
1504-00: RNCC: 3 | RNVC: 2
N1A: RNCC: 5 | RNVC: 9
1504: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-429-0577
Access Cover

144290577
4207-311C516: RNCC: 3 | RNVC: 2
0882330L00: RNCC: 5 | RNVC: 2
4207-311C516: RNCC: 5 | RNVC: 9

9 Jan 1989

5340-14-348-5184
Retaining Strap

143485184
291102-1-10: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-527-7938
Cover Strip

145277938
305-729-401-0: RNCC: 3 | RNVC: 2
305-729-401-0: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-14-332-2031
Loop Clamp

143322031
04-38-03: RNCC: 3 | RNVC: 2
A312-2-7: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-377-9363
Expansion Shield

143779363
90-53: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-482-9263
Pipe Hanger

144829263
78732-032-024: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-310-2564
Mending Plate

143102564
NO PRIMARY REF14-310-2564: RNCC: 3 | RNVC: 2
4506861DET23: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-550-5688
Filler Opening Cap

145505688
A1-511: RNCC: 3 | RNVC: 2

27 Jun 2006

5340-14-369-1440
Utility Access Door

143691440
365A25-0014-0001: RNCC: 3 | RNVC: 2

14 Mar 1996

5340-14-449-3940
Cover Strip

144493940
MY20551-3058: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-222-7934
Webbing Strap

142227934
NO PRIMARY REF14-222-7934: RNCC: 3 | RNVC: 2
61183: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-335-0518
Handwheel

143350518
MAT137-004F4AVIORB: RNCC: 3 | RNVC: 2
GSM137-007F24AVI0RB: RNCC: 5 | RNVC: 2
GSM137-07F24AVI0RB: RNCC: 5 | RNVC: 2

2 Jun 1976

5340-14-394-2313
Mounting Plate

143942313
AS503-21A: RNCC: 3 | RNVC: 2
AS503BIS21B: RNCC: 5 | RNVC: 2

23 Jun 1984

5340-14-289-5847
Corner Brace

142895847
121E27-075-24-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-251-7439
Rod End Clevis

142517439
23310-02-1031P105: RNCC: 3 | RNVC: 2
233-00-38-11: RNCC: 5 | RNVC: 2

5 Apr 1989

5340-14-440-6690
Clamping Catch

144406690
GR.77-IB: RNCC: 3 | RNVC: 2
GR77IB: RNCC: 5 | RNVC: 2
91795300: RNCC: 5 | RNVC: 2

18 Jul 1990

5340-14-496-9145
Mounting Plate

144969145
490127-32020-16: RNCC: 3 | RNVC: 2
F300 0T 022 2642: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-472-9105
Mounting Bracket

144729105
332V87-8011-25: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-299-2647
Angle Bracket

142992647
82932: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-475-1890
Mounting Plate

144751890
RA1M240700141: RNCC: 3 | RNVC: 2

22 Mar 1995

5340-14-434-0677
Retaining Strap

144340677
536399: RNCC: 3 | RNVC: 2

4 Sep 1989

5340-14-425-4519
Access Cover

144254519
27117312-6: RNCC: 3 | RNVC: 2

5 Jul 1988

5340-14-407-0376
Runner

144070376
1009649: RNCC: 3 | RNVC: 2

29 Jan 1986

5340-14-303-4792
Pipe Hanger

143034792
501-729-578-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-425-7354
Block Clamp

144257354
91432B10-25-10B78: RNCC: 3 | RNVC: 2

21 Jul 1988

5340-14-553-4514
Cover Strip

145534514
CCN301-201-091A1: RNCC: 3 | RNVC: 2

4 Apr 2007

5340-14-405-3047
Anchor Strap

144053047
5204-57-035: RNCC: 3 | RNVC: 2
5204-57-035: RNCC: 5 | RNVC: 9

27 Nov 1985

5340-14-275-7570
Butt Hinge

142757570
MS7524-5A7200: RNCC: 3 | RNVC: 2
MS7524-5A: RNCC: 5 | RNVC: 2
MS7524-5A1830: RNCC: 5 | RNVC: 2
MS7524-5A1830: RNCC: 5 | RNVC: 9
MS7524-5A: RNCC: 5 | RNVC: 9
MS7524-5A1830: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-311-0715
Expansion Plug

143110715
E29584-32AT: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-529-1528
Access Cover

145291528
457-02028-000: RNCC: 3 | RNVC: 2

13 Mar 2002

5340-14-542-9978
Access Cover

145429978
SH2759-03-09: RNCC: 3 | RNVC: 2

18 Aug 2004

5340-14-488-4307
Block Clamp

144884307
620-846-752-0: RNCC: 3 | RNVC: 2

7 May 1997

5340-14-412-5175
Anchor Strap

144125175
NO PRIMARY REF14-412-5175: RNCC: 3 | RNVC: 2
D10-47787: RNCC: 5 | RNVC: 9

15 Oct 1986

5340-14-497-7439
Mounting Plate

144977439
J05085-01-0210P008: RNCC: 3 | RNVC: 2

15 Oct 1997

5340-14-370-1959
Pipe Hanger

143701959
366A61-3420-20: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-279-2543
Swivel Caster

142792543
TP3BR100-36L: RNCC: 3 | RNVC: 2
TL3BR100-26L: RNCC: 5 | RNVC: 2
TL3BR100-36L: RNCC: 5 | RNVC: 2
TP3BR100-31L: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-502-9934
Cover Strip

145029934
330A22-2417-26: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-338-1401
Bow Handle

143381401
9379-18: RNCC: 3 | RNVC: 9

6 Nov 1976

5340-14-362-5100
Mounting Plate

143625100
NO PRIMARY REF14-362-5100: RNCC: 3 | RNVC: 2
F2033072: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-382-5611
Corner Brace

143825611
NO PRIMARY REF14-382-5611: RNCC: 3 | RNVC: 2
16932159: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-460-5586
Bumper

144605586
511454: RNCC: 3 | RNVC: 2
M4ZS460D2334: RNCC: 5 | RNVC: 2
295-1540: RNCC: 5 | RNVC: 2

29 Jan 1993

5340-14-296-3586
Loop Clamp

142963586
CAP10-30-60-06: RNCC: 3 | RNVC: 9

1 Jan 1973

5340-14-344-4869
Bumper

143444869
702A21-0116-20: RNCC: 3 | RNVC: 2
85-800-6358: RNCC: 6 | RNVC: 9

10 Aug 1977

5340-14-349-7533
Angle Bracket

143497533
053M53-566057M: RNCC: 3 | RNVC: 2
0566057M00: RNCC: 5 | RNVC: 2

14 Jun 1978

5340-14-484-0402
Mounting Bracket

144840402
U3-15562-00-03-M5520: RNCC: 3 | RNVC: 2
U3-15562-00-03: RNCC: 5 | RNVC: 2
U3-15562-00-03-M5520: RNCC: 5 | RNVC: 2
89296347: RNCC: 5 | RNVC: 2
U3-15562-00-03-M5520: RNCC: 5 | RNVC: 9
U3-15562-00-03-M5520: RNCC: 5 | RNVC: 9

17 Oct 1996

5340-14-407-8254
Access Cover

144078254
121-0010-01-03-02: RNCC: 3 | RNVC: 2
85-693-1083: RNCC: 6 | RNVC: 9

5 Mar 1986

5340-14-514-9967
Mounting Plate

145149967
SA/CS31/10: RNCC: 3 | RNVC: 2

25 Jun 1999

5340-14-409-3915
Bumper

144093915
2418-13: RNCC: 3 | RNVC: 9
7910004411: RNCC: 5 | RNVC: 9

28 May 1986

5340-14-264-1712
Loop Clamp

142641712
55218-312D507ADL: RNCC: 3 | RNVC: 2
55218-112N: RNCC: 5 | RNVC: 2
55218-312-001ADL: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-386-5383
Access Cover

143865383
366A96-3208-20: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-318-8915
Support Hook

143188915
121A52-440-11-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-516-0315
Angle Bracket

145160315
312-18441-002: RNCC: 3 | RNVC: 2

6 Sep 1999

5340-14-331-7113
Retaining Strap

143317113
121A77-115-00-0M1: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-041-2846
Mending Plate

140412846
NO PRIMARY REF14-041-2846: RNCC: 3 | RNVC: 2
8358031: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-448-7108
Runner

144487108
A03037-10-2010P002: RNCC: 3 | RNVC: 2

4 Jul 1991

5340-14-339-9078
Rim Lock Set

143399078
5752-0CDT: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-374-7199
Bumper

143747199
365A21-3417-22: RNCC: 3 | RNVC: 2

30 Jan 1982

5340-14-478-6190
Mounting Plate

144786190
160-746252-13: RNCC: 3 | RNVC: 2

8 Nov 1995

5340-14-464-3064
Bumper

144643064
681624029: RNCC: 3 | RNVC: 2
6816-24029: RNCC: 5 | RNVC: 2

28 Jul 1993

5340-14-406-0027
Anchor Strap

144060027
SDMU-6442-P5: RNCC: 3 | RNVC: 2

20 Dec 1985

5340-14-426-1461
Mounting Plate

144261461
M271-1004: RNCC: 3 | RNVC: 2
F300 0T 006 1287: RNCC: 6 | RNVC: 9

4 Aug 1988

5340-14-421-4114
Cover Strip

144214114
341A81-0651-20: RNCC: 3 | RNVC: 2

14 Jan 1988

5340-14-275-8468
Turnbuckle Body

142758468
253-5M312P44A: RNCC: 3 | RNVC: 9
PA253-5M312P44A: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-446-2709
Mounting Bracket

144462709
099429A: RNCC: 3 | RNVC: 2
10-0802: RNCC: 5 | RNVC: 2

11 Mar 1991

5340-14-370-8946
Rigid Caster

143708946
365A91-3055-101: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-369-1846
Swivel Caster

143691846
365A91-5410-30: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-473-8640
Mounting Bracket

144738640
332P67-1509-01: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-330-1184
Bow Handle

143301184
NO PRIMARY REF14-330-1184: RNCC: 3 | RNVC: 2
ST2071-7U: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-302-7689
Loop Clamp

143027689
915-1-71-47: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-524-3893
Cover Strip

145243893
365A25-0028-1401: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-451-1210
Loop Clamp

144511210
616610-1: RNCC: 3 | RNVC: 2
616610-1: RNCC: 5 | RNVC: 9
85-694-3879: RNCC: 6 | RNVC: 9

30 Oct 1991

5340-14-352-6107
Bumper

143526107
053V01-542282D: RNCC: 3 | RNVC: 2
0542282D00: RNCC: 5 | RNVC: 2

14 Nov 1978

5340-14-384-3186
Loop Clamp

143843186
92831211: RNCC: 3 | RNVC: 2
9-28GE21: RNCC: 5 | RNVC: 2

4 May 1983

5340-14-420-2053
Cable Retractor

144202053
NO PRIMARY REF14-420-2053: RNCC: 3 | RNVC: 2
S3-1012-3+T: RNCC: 5 | RNVC: 9

25 Nov 1987

5340-14-343-1096
Access Cover

143431096
104335-01: RNCC: 3 | RNVC: 2
104335: RNCC: 5 | RNVC: 9
104335-01: RNCC: 5 | RNVC: 9

16 Jun 1977

5340-14-458-3550
Handwheel

144583550
1980-82-3-01: RNCC: 3 | RNVC: 2

20 Oct 1992

5340-14-456-6823
Blank Panel

144566823
90-320-A1006-REP4: RNCC: 3 | RNVC: 2
1061771R00: RNCC: 5 | RNVC: 2

22 Jul 1992

5340-14-501-1640
Mounting Bracket

145011640
014-027-120: RNCC: 3 | RNVC: 2
014.027.120: RNCC: 3 | RNVC: 2
F300 0T 025 2042: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-301-3606
Clamping Catch

143013606
GP10IP: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-498-3156
Loop Clamp

144983156
91952644: RNCC: 3 | RNVC: 2
PAA73-10-008-02: RNCC: 3 | RNVC: 2
F300 0T 004 7821: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-439-3701
Loop Clamp

144393701
3-2633-03-63A: RNCC: 3 | RNVC: 2
3-2633-03-63A: RNCC: 5 | RNVC: 9

25 Apr 1990

5340-14-472-7540
Bridge Clamp

144727540
332A57-2179-20: RNCC: 3 | RNVC: 2

9 Nov 1994

5340-14-486-3876
Pipe Hanger

144863876
815-0-86-036: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-042-3435
Bumper

140423435
121E22-835-22-0: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-501-9443
Mounting Bracket

145019443
332A76-6442-00: RNCC: 3 | RNVC: 2

19 Nov 1997

5340-14-473-8612
Mounting Bracket

144738612
332A87-0305-21: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-409-9587
Mounting Plate

144099587
1909-24-01: RNCC: 3 | RNVC: 9

4 Jun 1986

5340-14-362-4792
Retaining Strap

143624792
F275-82: RNCC: 3 | RNVC: 2

19 Mar 1980

5340-14-335-9319
Clamping Catch

143359319
GR.58-EIA: RNCC: 3 | RNVC: 2
0167517R00: RNCC: 5 | RNVC: 2
GR58-1IPA: RNCC: 5 | RNVC: 2
GR58EIA: RNCC: 5 | RNVC: 2

24 Jul 1976

5340-14-512-3938
Handwheel

145123938
2164-03-01-01-01: RNCC: 3 | RNVC: 2
2164-03-01-01-01: RNCC: 5 | RNVC: 9

12 Feb 1999

5340-14-454-7005
Runner

144547005
2085-02-056: RNCC: 3 | RNVC: 2
89411618: RNCC: 5 | RNVC: 9

9 Apr 1992

5340-14-331-4872
Loop Clamp

143314872
18126878: RNCC: 3 | RNVC: 2
85-800-4218: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-458-9702
Shelf Bracket

144589702
0700-302-210: RNCC: 3 | RNVC: 2

10 Nov 1992

5340-14-463-9072
Loop Clamp

144639072
MAT169-0007F14: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-14-345-2909
Doorstop

143452909
FB1A884-11820: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-238-3399
Angle Bracket

142383399
NO PRIMARY REF14-238-3399: RNCC: 3 | RNVC: 2
156852: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-472-8648
Angle Bracket

144728648
332A21-1030-77: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-040-2747
Threaded Rod End

140402747
NO PRIMARY REF14-040-2747: RNCC: 3 | RNVC: 2
S403149: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-257-0445
Rod End Clevis

142570445
NO PRIMARY REF14-257-0445: RNCC: 3 | RNVC: 2
4-04-001-00-01: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-328-5996
Butt Hinge

143285996
321A58-0008-71: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-412-2192
Mounting Bracket

144122192
332A25-1084-21: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-501-4407
Dashpot Piston

145014407
428950: RNCC: 3 | RNVC: 2
428950-001: RNCC: 5 | RNVC: 9

29 Oct 1997

5340-14-473-8626
Bumper

144738626
332P21-1065-37: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-405-5658
Clamping Catch

144055658
GR.58-IA: RNCC: 3 | RNVC: 2
GR58IA: RNCC: 5 | RNVC: 2

4 Dec 1985

5340-14-335-0209
Handwheel

143350209
GSM416-003F10: RNCC: 3 | RNVC: 2
A0290-003F8: RNCC: 5 | RNVC: 2

2 Jun 1976

5340-14-304-8254
Mending Plate

143048254
1050-59-001-01-0: RNCC: 3 | RNVC: 2
59-001-01-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-322-8616
Cover Strip

143228616
3130S73-86-088: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-472-7502
Mounting Plate

144727502
332A33-1176-20: RNCC: 3 | RNVC: 2

9 Nov 1994

5340-14-367-5675
Access Cover

143675675
C01404-86: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-478-6339
Rod End Clevis

144786339
307-057-906-0: RNCC: 3 | RNVC: 2

8 Nov 1995

5340-14-541-9646
Access Cover

145419646
20000-473: RNCC: 3 | RNVC: 2
502118021002A: RNCC: 3 | RNVC: 9
2 0000-473: RNCC: 5 | RNVC: 2

2 Jul 2004

5340-14-298-1862
Retaining Strap

142981862
4T002938-00: RNCC: 3 | RNVC: 9

1 Jan 1973

5340-14-520-3983
Loop Clamp

145203983
CS2-0.000.295: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-265-6111
Butt Hinge

142656111
NO PRIMARY REF14-265-6111: RNCC: 3 | RNVC: 2
CPC: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-390-1553
Angle Bracket

143901553
366A61-2015-65: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-576-0808
Utility Resilient Mount

145760808
11590000: RNCC: 3 | RNVC: 2
CB1390-70: RNCC: 5 | RNVC: 2

29 May 2013

5340-14-551-5117
Mounting Bracket

145515117
730010S710-06A: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-485-0726
Mounting Bracket

144850726
332A54-1096-00: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-14-437-9465
Mounting Bracket

144379465
330A25-2203-34: RNCC: 3 | RNVC: 2

28 Feb 1990

5340-14-282-8566
Loop Clamp

142828566
511131050241: RNCC: 3 | RNVC: 2
A0021-35G24: RNCC: 5 | RNVC: 2
35G24: RNCC: 5 | RNVC: 2
A0021-35G24: RNCC: 5 | RNVC: 2
ASNA0021-35G24: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-340-9205
Cover Strip

143409205
330A76-3300-33: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-549-8907
Mounting Bracket

145498907
169E599-00: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-547-5653
Bow Handle

145475653
29625083-00: RNCC: 3 | RNVC: 2

17 Oct 2005

5340-14-388-5108
Rigid Caster

143885108
911302-28: RNCC: 3 | RNVC: 2
91130228: RNCC: 5 | RNVC: 2

3 Nov 1983

5340-14-379-7445
Mending Plate

143797445
102192514: RNCC: 3 | RNVC: 2
0121-116: RNCC: 5 | RNVC: 2
102192514: RNCC: 5 | RNVC: 2

20 Oct 1982

5340-14-368-3055
Bumper

143683055
X07414-03: RNCC: 3 | RNVC: 2
2101802: RNCC: 5 | RNVC: 2
2101802: RNCC: 5 | RNVC: 2
12-165-2183: RNCC: 6 | RNVC: 9

20 Feb 1981

5340-14-288-6944
Luggage Handle

142886944
NO PRIMARY REF14-288-6944: RNCC: 3 | RNVC: 2
D2652PPT17-6: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-359-6027
Mending Plate

143596027
3C003811-00: RNCC: 3 | RNVC: 2
P3C003811-00: RNCC: 3 | RNVC: 2
P3C003811-00: RNCC: 5 | RNVC: 9
3C003811-00: RNCC: 5 | RNVC: 9

15 Oct 1979

5340-14-290-2326
Retaining Strap

142902326
330A75-1963-00: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-551-4526
Mounting Bracket

145514526
C03-1040: RNCC: 3 | RNVC: 2

22 Sep 2006

5340-14-529-4178
Pipe Hanger

145294178
EA1M705-28-02: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-320-4232
Threaded Rod End

143204232
NO PRIMARY REF14-320-4232: RNCC: 3 | RNVC: 2
137082: RNCC: 5 | RNVC: 9
C137082: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-486-5523
Access Cover

144865523
90038K161-04P3: RNCC: 3 | RNVC: 2
0190038K161-04P3: RNCC: 5 | RNVC: 2

21 Mar 1997

5340-14-377-1328
Access Cover

143771328
10-261-006: RNCC: 3 | RNVC: 2
10261006: RNCC: 5 | RNVC: 2

17 May 1982

5340-14-330-4174
Access Cover

143304174
0910-607-000: RNCC: 3 | RNVC: 2
0910-607: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-042-5809
Retaining Clip

140425809
676-15705-00: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-390-8891
Mounting Bracket

143908891
ST159-2M162P11: RNCC: 3 | RNVC: 2
J05087-162-1000P011: RNCC: 5 | RNVC: 2

1 Mar 1984

5340-14-205-6181
Turnbuckle Body

142056181
253-5M312P38A: RNCC: 3 | RNVC: 9
PA253-5M312P38A: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-313-7798
Access Cover

143137798
3511 130 59181: RNCC: 3 | RNVC: 2
3511-130-59181: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-529-5226
Webbing Strap

145295226
3130S73-75-697: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-308-8051
Snap Hook

143088051
22202-040: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-204-1109
Rod End Clevis

142041109
3130S73-12-103: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-478-0000
Retaining Strap

144780000
650-403-050-0: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-14-426-6317
Access Cover

144266317
J05527-11-0300P011: RNCC: 3 | RNVC: 2

13 Sep 1988

5340-14-426-1370
Butt Hinge

144261370
M223B00032: RNCC: 3 | RNVC: 2
M223-32: RNCC: 5 | RNVC: 9
F300 0T 006 1272: RNCC: 6 | RNVC: 9

4 Aug 1988

5340-14-304-3649
Loop Clamp

143043649
61-71-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-428-5064
Rod End Clevis

144285064
4602DHA102-0005: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-338-7839
Angle Bracket

143387839
3668-4-312-1: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-384-5092
Rod End Clevis

143845092
0294401710: RNCC: 3 | RNVC: 2
302-296-201P: RNCC: 5 | RNVC: 2

4 May 1983

5340-14-367-5952
Butt Hinge

143675952
CP150724-30: RNCC: 3 | RNVC: 2
CP150-724-30: RNCC: 5 | RNVC: 2

19 Jan 1981

5340-14-420-8548
Rod End Clevis

144208548
SL4308-06: RNCC: 3 | RNVC: 2
301-13-6C1: RNCC: 5 | RNVC: 2
301-136C1: RNCC: 5 | RNVC: 2

16 Dec 1987

5340-14-366-3213
Rigid Caster

143663213
330A58-6031-00: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-503-2899
Access Cover

145032899
332P65-1455-10: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-374-9542
Bow Handle

143749542
345401010201: RNCC: 3 | RNVC: 2
85-691-7045: RNCC: 6 | RNVC: 9

30 Jan 1982

5340-14-526-0738
Arched Cushion

145260738
E1M3708-20: RNCC: 3 | RNVC: 2
MAT169-0024F8BLEUE: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-14-531-2328
Mounting Bracket

145312328
341A84-5012-46: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-412-2996
Rod End Clevis

144122996
600-917-10-09: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-521-8072
Access Cover

145218072
IF232-422: RNCC: 3 | RNVC: 2

18 Sep 2000

5340-14-536-1434
Hand Crank Arm

145361434
4518-2025: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-547-8339
Utility Access Door

145478339
R8-011: RNCC: 3 | RNVC: 2
V804903: RNCC: 5 | RNVC: 2

17 Nov 2005

5340-14-489-6900
Mounting Bracket

144896900
332A58-5081-20: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-512-3941
Loop Clamp

145123941
2164-03-02: RNCC: 3 | RNVC: 2

12 Feb 1999

5340-14-292-5785
Threaded Rod End

142925785
121E47-161-00-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-370-8748
Angle Bracket

143708748
303-988-802-0: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-370-8702
Pipe Hanger

143708702
303-934-602-0: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-480-8641
Buckle

144808641
902-PBS-009: RNCC: 3 | RNVC: 2
SYQ3508: RNCC: 5 | RNVC: 2

4 Apr 1996

5340-14-514-4747
Access Cover

145144747
47138218: RNCC: 3 | RNVC: 2
47138218: RNCC: 5 | RNVC: 2
IF-192-0177: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-311-4910
Bow Handle

143114910
NO PRIMARY REF14-311-4910: RNCC: 3 | RNVC: 2
642484: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-437-4709
Mounting Bracket

144374709
332A91-3121-29: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-482-9305
Pipe Hanger

144829305
78732-040-055: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-531-8193
Mounting Bracket

145318193
341A62-5000-20: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-465-1515
Rod End Clevis

144651515
365A25-3318-00: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-312-4618
Rim Lock Set

143124618
NO PRIMARY REF14-312-4618: RNCC: 3 | RNVC: 2
4500-06-186: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-368-5471
Quick Release Pin

143685471
A0023C06R70N-W: RNCC: 1 | RNVC: 2
51453C6R70NW: RNCC: 3 | RNVC: 2
A0023C06R70N-W: RNCC: 5 | RNVC: 2
51453C6R70NW: RNCC: 5 | RNVC: 2
55701C06R70N-W: RNCC: 5 | RNVC: 9
51453C6R70NW: RNCC: 5 | RNVC: 9
85-691-1534: RNCC: 6 | RNVC: 9

20 Feb 1981

5340-14-285-2190
Rod End Connector

142852190
A10-90-141-71-0: RNCC: 3 | RNVC: 2
A10-90-141-71-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-524-7594
Mounting Bracket

145247594
21230647-00: RNCC: 3 | RNVC: 2
21230647-5: RNCC: 5 | RNVC: 2

11 Apr 2001

5340-14-329-1527
Lock-Release Lever

143291527
78474-6: RNCC: 3 | RNVC: 2
85-664-3450: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-432-2164
Rod End Clevis

144322164
NO PRIMARY REF14-432-2164: RNCC: 3 | RNVC: 2
40100-07: RNCC: 5 | RNVC: 9

29 May 1989

5340-14-297-5339
Loop Clamp

142975339
C6050-220-5EIS0: RNCC: 3 | RNVC: 2
C6050-220-5E: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-332-6362
Rod End Clevis

143326362
T12-51P11: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-297-1350
Loop Clamp

142971350
MY20515-006: RNCC: 3 | RNVC: 2
MY20-515-006: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-384-6431
Angle Bracket

143846431
16497247: RNCC: 3 | RNVC: 2

2 Jun 1983

5340-14-459-6079
Mounting Plate

144596079
20322685: RNCC: 3 | RNVC: 2
20322685: RNCC: 5 | RNVC: 9

10 Dec 1992

5340-14-503-8915
Mounting Bracket

145038915
GFACA28: RNCC: 3 | RNVC: 2
F0023450: RNCC: 5 | RNVC: 9

4 Feb 1998

5340-14-413-9606
Retaining Strap

144139606
ST400S60P103: RNCC: 3 | RNVC: 2
BJQS60P103: RNCC: 5 | RNVC: 2

22 Jan 1987

5340-14-524-3529
Bumper

145243529
SD001PD020219: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-456-5734
Mounting Bracket

144565734
D55823: RNCC: 3 | RNVC: 2
D55823: RNCC: 5 | RNVC: 2

9 Jul 1992

5340-14-333-3422
Retaining Strap

143333422
52938: RNCC: 3 | RNVC: 9

2 Jul 1975

5340-14-541-0470
Metal Grille

145410470
31102232: RNCC: 3 | RNVC: 2

7 May 2004

5340-14-484-8445
Dashpot Piston

144848445
8003700K00: RNCC: 3 | RNVC: 2

10 Dec 1996

5340-14-543-2354
Utility Access Door

145432354
128-20-650-01: RNCC: 3 | RNVC: 2

7 Oct 2004

5340-14-419-7785
Rod End Clevis

144197785
160H712884-08: RNCC: 3 | RNVC: 2

5 Nov 1987

5340-14-503-2775
Access Cover

145032775
332A55-1043-20: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-310-6486
Mending Plate

143106486
95101313: RNCC: 3 | RNVC: 2
20-0500: RNCC: 5 | RNVC: 2
062720615: RNCC: 5 | RNVC: 9
720615: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-489-7499
Loop Clamp

144897499
NO PRIMARY REF14-489-7499: RNCC: 3 | RNVC: 2
55217-318DB: RNCC: 5 | RNVC: 9
91946472: RNCC: 5 | RNVC: 9
F300 0T 004 7008: RNCC: 6 | RNVC: 9

13 Aug 1997

5340-14-315-7317
Pipe Hanger

143157317
321A75-2025-00: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-347-7513
Runner

143477513
A0141-216: RNCC: 3 | RNVC: 2

1 Mar 1978

5340-14-493-6049
Angle Bracket

144936049
M589-138311: RNCC: 3 | RNVC: 2
F300 0T 013 8338: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-331-5410
Access Cover

143315410
73115-01-10-17R2: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-422-7247
Mounting Bracket

144227247
0294208340: RNCC: 3 | RNVC: 2
302-286-102-0: RNCC: 5 | RNVC: 2

17 Mar 1988

5340-14-336-7491
Mending Plate

143367491
NO PRIMARY REF14-336-7491: RNCC: 3 | RNVC: 2
70S238: RNCC: 5 | RNVC: 9
F532: RNCC: 5 | RNVC: 9

7 Oct 1976

5340-14-508-5434
Bumper

145085434
365A25-3459-01: RNCC: 3 | RNVC: 2

16 Sep 1998

5340-14-496-8832
Angle Bracket

144968832
235777-001: RNCC: 3 | RNVC: 2
F300 0T 022 2324: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-496-9939
Rim Lock

144969939
10 066 00: RNCC: 3 | RNVC: 2
10-06600: RNCC: 5 | RNVC: 2
10 066 00: RNCC: 5 | RNVC: 9
F300 0T 022 4635: RNCC: 5 | RNVC: 9

15 Oct 1997

5340-14-485-5226
Mounting Plate

144855226
408554: RNCC: 3 | RNVC: 2
408554-001: RNCC: 5 | RNVC: 9

29 Jan 1997

5340-14-533-1240
Mounting Plate

145331240
459-11555-000: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-14-464-9567
Cover Strip

144649567
365A25-0036-25: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-206-9166
Loop Clamp

142069166
ASNA0021-25G16: RNCC: 1 | RNVC: 2
51113105016: RNCC: 3 | RNVC: 2
25G16: RNCC: 5 | RNVC: 2
A0021-25G16: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-371-6399
Bow Handle

143716399
496242: RNCC: 3 | RNVC: 2
85-691-9335: RNCC: 6 | RNVC: 9

5 Aug 1981

5340-14-549-6417
Utility Access Door

145496417
JCB 10 137-306: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-14-494-1859
Buckle

144941859
13311-113-160: RNCC: 3 | RNVC: 2
13311-113: RNCC: 5 | RNVC: 9
F300 0T 015 9238: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-405-5384
Mounting Plate

144055384
NO PRIMARY REF14-405-5384: RNCC: 3 | RNVC: 2
46524: RNCC: 5 | RNVC: 9

27 Nov 1985

5340-14-379-4162
Anchor Strap

143794162
208-06673-00: RNCC: 3 | RNVC: 2
3027-11: RNCC: 5 | RNVC: 2

1 Oct 1982

5340-14-262-4820
Rod End Clevis

142624820
321A82-0344-20: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-363-0390
Access Cover

143630390
NO PRIMARY REF14-363-0390: RNCC: 3 | RNVC: 2
F2033045: RNCC: 5 | RNVC: 9

3 Apr 1980

5340-14-372-1047
Plug Button

143721047
NO PRIMARY REF14-372-1047: RNCC: 3 | RNVC: 2
2693: RNCC: 5 | RNVC: 9
DP812-2693: RNCC: 5 | RNVC: 9
DP812N0IR: RNCC: 5 | RNVC: 9

1 Sep 1981

5340-14-484-5035
Webbing Strap

144845035
404-13-26: RNCC: 3 | RNVC: 2
5000824398: RNCC: 5 | RNVC: 2

21 Nov 1996

5340-14-359-5970
Angle Bracket

143595970
NO PRIMARY REF14-359-5970: RNCC: 3 | RNVC: 2
60894: RNCC: 5 | RNVC: 9

15 Oct 1979

5340-14-428-5498
Rod End Clevis

144285498
4603EHA000-0022: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-490-5609
Threaded Rod End

144905609
J05085-00-0000T046: RNCC: 3 | RNVC: 2

2 Oct 1997

5340-14-419-5572
Vent Plug

144195572
M371-02154: RNCC: 3 | RNVC: 2

21 Oct 1987

5340-14-444-9083
Loop Clamp

144449083
BN329-518-F12-219,1: RNCC: 3 | RNVC: 2

28 Jan 1991

5340-14-433-2935
Angle Bracket

144332935
320-563-501-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-14-261-3086
Rod End Connector

142613086
175-84-105: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-346-5404
Rod End Connector

143465404
552-401MA013REP9: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-536-2035
Webbing Strap

145362035
CMU1T-L3,5M-9643004/P/3819: RNCC: 3 | RNVC: 2

16 Jul 2003

5340-14-352-4370
Retaining Strap

143524370
501-730-521-0: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-289-6168
Rod End Clevis

142896168
121E27-463-02-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-468-6515
Arched Cushion

144686515
MAT169-0012F23DE23: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-14-529-9058
Access Cover

145299058
TAAI2-407090-21: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-299-3355
Mending Plate

142993355
MY20552-8505: RNCC: 3 | RNVC: 2
MY20-552-85-05: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-354-7570
Retaining Strap

143547570
150638: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-444-5737
Mounting Bracket

144445737
000202293300: RNCC: 3 | RNVC: 2

15 Jan 1991

5340-14-483-4552
Bow Handle

144834552
102: RNCC: 3 | RNVC: 2

12 Sep 1996

5340-14-346-7605
Rim Lock Set

143467605
1127ACLE455: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-14-520-8777
Mounting Bracket

145208777
19600684: RNCC: 3 | RNVC: 2

21 Jun 2000

5340-14-466-2190
Runner

144662190
347238: RNCC: 3 | RNVC: 2
RAB2033: RNCC: 5 | RNVC: 2

2 Nov 1993

5340-14-501-0018
Mounting Bracket

145010018
10174511: RNCC: 3 | RNVC: 2
F300 0T 025 0238: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-509-1175
Mounting Plate

145091175
JVJT210002: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-451-2345
Synchro Clamp

144512345
PM1A319000015: RNCC: 3 | RNVC: 2
PM1A319000015: RNCC: 5 | RNVC: 2

6 Nov 1991

5340-14-484-1844
Retaining Strap

144841844
5000749691: RNCC: 3 | RNVC: 2

31 Oct 1996

5340-14-461-4675
Mounting Plate

144614675
807925: RNCC: 3 | RNVC: 2

10 Mar 1993

5340-14-458-8761
Mounting Plate

144588761
20706931: RNCC: 3 | RNVC: 2

5 Nov 1992

5340-14-444-7054
Bumper

144447054
39538923: RNCC: 3 | RNVC: 2
6126: RNCC: 5 | RNVC: 9
39538923: RNCC: 5 | RNVC: 9

16 Jan 1991

5340-14-528-5499
Access Cover

145285499
359845: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-530-6186
Mounting Bracket

145306186
709179: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-14-218-5721
Loop Clamp

142185721
0604149600: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-513-8474
Bumper

145138474
327175: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-482-4955
Mounting Plate

144824955
PM1A575194320: RNCC: 3 | RNVC: 2
PM1A575194320: RNCC: 5 | RNVC: 2

11 Jul 1996

5340-14-506-0406
Pipe Hanger

145060406
RA1M701852250: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-14-392-3966
Retaining Clip

143923966
401MA0580F2REPA: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-550-9200
Angle Bracket

145509200
RA1B702606241A1: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-518-5419
Bumper

145185419
5000678414: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-525-7454
Angle Bracket

145257454
04197840: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-550-4651
Angle Bracket

145504651
RA1A703117521: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-441-0593
Mounting Plate

144410593
270352: RNCC: 3 | RNVC: 2

20 Aug 1990

5340-14-484-9208
Mounting Plate

144849208
U907192: RNCC: 3 | RNVC: 9
U07190: RNCC: 5 | RNVC: 9

12 Dec 1996

5340-14-472-8786
Access Cover

144728786
332A41-0045-26: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-345-5462
Retaining Band

143455462
3130S53-32-030-01: RNCC: 3 | RNVC: 2
85-689-2243: RNCC: 6 | RNVC: 9

5 Oct 1977

5340-14-424-1184
Angle Bracket

144241184
NO PRIMARY REF14-424-1184: RNCC: 3 | RNVC: 2
555771: RNCC: 5 | RNVC: 9

17 May 1988

5340-14-425-3510
Loop Clamp

144253510
61100005028: RNCC: 3 | RNVC: 2
75N28: RNCC: 5 | RNVC: 2
NSA5517-31N: RNCC: 5 | RNVC: 2
NSA5517-31N: RNCC: 5 | RNVC: 2

30 Jun 1988

5340-14-475-7147
Plug Button

144757147
8030-139-000B: RNCC: 3 | RNVC: 2
85-695-4593: RNCC: 6 | RNVC: 9

26 Apr 1995

5340-14-506-1181
Mounting Bracket

145061181
6291-40121: RNCC: 3 | RNVC: 2

6 Apr 1998

5340-14-506-4369
Access Cover

145064369
NO PRIMARY REF14-506-4369: RNCC: 3 | RNVC: 2
ST24632: RNCC: 5 | RNVC: 2
ST20931: RNCC: 5 | RNVC: 2

29 Apr 1998

5340-14-233-3794
Rod End Clevis

142333794
3210-21010-511: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-555-6224
Rigid Caster

145556224
HF5BA125-11R: RNCC: 3 | RNVC: 2

3 Dec 2007

5340-14-335-0514
Handwheel

143350514
MAT137-003F10AVIORB: RNCC: 3 | RNVC: 2
GSM137-007F22AVI0RB: RNCC: 5 | RNVC: 2
GSM137-07F22AVI0RB: RNCC: 5 | RNVC: 2

2 Jun 1976

5340-14-446-1119
Mounting Bracket

144461119
0372-28-24001: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-206-9151
Loop Clamp

142069151
51113105011: RNCC: 3 | RNVC: 2
ASNA0021-25G11: RNCC: 5 | RNVC: 2
A0021-25G11: RNCC: 5 | RNVC: 2
ASNA0021-25G11: RNCC: 5 | RNVC: 2
Z00.N7141380612: RNCC: 5 | RNVC: 2
253101100: RNCC: 5 | RNVC: 2
25G11: RNCC: 5 | RNVC: 9
HB25G11: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-485-3616
Split Tubular Clip

144853616
NO PRIMARY REF14-485-3616: RNCC: 3 | RNVC: 2
RAB9709: RNCC: 5 | RNVC: 2
10001: RNCC: 5 | RNVC: 9

20 Jan 1997

5340-14-522-9078
Mounting Plate

145229078
500-75-00-16: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-14-391-2802
Rod End Clevis

143912802
UK20-C0721: RNCC: 3 | RNVC: 2
UK20: RNCC: 5 | RNVC: 2

1 Mar 1984

5340-14-351-9369
Bumper

143519369
17611-286-000: RNCC: 3 | RNVC: 2
17611-286-000: RNCC: 5 | RNVC: 2

16 Oct 1978

5340-14-407-3529
Quick Release Pin

144073529
625S3R06: RNCC: 3 | RNVC: 2
85-693-0635: RNCC: 6 | RNVC: 9

12 Feb 1986

5340-14-382-4558
Access Cover

143824558
465-65001-413: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-202-5347
Loop Clamp

142025347
51113105019: RNCC: 3 | RNVC: 2
N7141380622: RNCC: 5 | RNVC: 2
9562810260: RNCC: 5 | RNVC: 2
A0021-25G19: RNCC: 5 | RNVC: 2
25G19: RNCC: 5 | RNVC: 2
ASNA0021-25G19: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-14-467-9536
Synchro Clamp

144679536
A1-73085: RNCC: 3 | RNVC: 2

2 Feb 1994

5340-14-543-2353
Utility Access Door

145432353
128-20-645-01: RNCC: 3 | RNVC: 2

7 Oct 2004

5340-14-369-9378
Anchor Strap

143699378
2-988-400: RNCC: 3 | RNVC: 2
2-988-400: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-303-4461
Bumper

143034461
121E23-638-35-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-433-4473
Flush Catch Claw

144334473
LA1201MALE: RNCC: 3 | RNVC: 2
PLU20-113: RNCC: 5 | RNVC: 2
1MALE: RNCC: 5 | RNVC: 2

26 Jul 1989

5340-14-351-1146
Synchro Clamp

143511146
6817415-001: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-423-8112
Rod End Clevis

144238112
304-648-101-0: RNCC: 3 | RNVC: 2

28 Apr 1988

5340-14-382-1854
Luggage Handle

143821854
PK11: RNCC: 3 | RNVC: 2
BAZ10695: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-515-4520
Loop Clamp

145154520
EDS82: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-550-4912
Angle Bracket

145504912
RA1M701212041N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-213-9927
Access Cover

142139927
456029627: RNCC: 3 | RNVC: 9

1 Jan 1964

5340-14-438-5701
Rod End Clevis

144385701
TB3010615E: RNCC: 3 | RNVC: 2

26 Mar 1990

5340-14-514-4393
Mounting Bracket

145144393
009565001P: RNCC: 3 | RNVC: 2

25 May 1999

5340-14-401-5382
Access Cover

144015382
222330: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-539-7703
Access Cover

145397703
019162L: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-14-367-3932
Bumper

143673932
15170124: RNCC: 3 | RNVC: 2
15170124: RNCC: 5 | RNVC: 2
15170124: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-520-2577
Mounting Bracket

145202577
201384: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-512-5042
Mounting Plate

145125042
PLAQU00390X00: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-381-6452
Bumper

143816452
24C1098: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-414-0189
Retaining Strap

144140189
BFC20807: RNCC: 3 | RNVC: 2
89171996: RNCC: 5 | RNVC: 2

22 Jan 1987

5340-14-482-4204
Pipe Hanger

144824204
78733-020-028: RNCC: 3 | RNVC: 2

11 Jul 1996

5340-14-372-9951
Angle Bracket

143729951
233-92-18: RNCC: 3 | RNVC: 2
85-687-1294: RNCC: 6 | RNVC: 9

21 Sep 1981

5340-14-031-6144
Control Rod

140316144
B0051-085-F14REFA: RNCC: 3 | RNVC: 2
J00986-01-1250P006: RNCC: 3 | RNVC: 2
3097-14-02-045: RNCC: 5 | RNVC: 2

14 Jun 1980

5340-14-526-0767
Arched Cushion

145260767
MAT169-0024F15FORTERAIDEUR: RNCC: 3 | RNVC: 2
E1M333630: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-14-247-3322
Lock Bolt

142473322
321A75-6030-00: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-386-0659
Buckle

143860659
9433-15: RNCC: 3 | RNVC: 2
AP84: RNCC: 5 | RNVC: 2

24 Aug 1983

5340-14-281-2504
Rod End Clevis

142812504
121A26-730-02-0: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-465-4895
Mounting Bracket

144654895
365A27-3355-20: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-522-8440
Shelf Bracket

145228440
453-10614-000: RNCC: 3 | RNVC: 2
M397-02-12-26-31: RNCC: 5 | RNVC: 2
453-10614-000: RNCC: 5 | RNVC: 9

29 Nov 2000

5340-14-449-8270
Mounting Plate

144498270
993-02-02-01: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-14-389-4186
Anchor Strap

143894186
7419-05: RNCC: 3 | RNVC: 2
7369222006: RNCC: 5 | RNVC: 2

20 Dec 1983

5340-14-299-9889
Strap End Clip

142999889
12230-055: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-327-7857
Butt Hinge

143277857
6007-100DR0ITE: RNCC: 3 | RNVC: 2
GRILLELAMES0RDINAIRES100DR0ITE: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-536-9745
Utility Access Door

145369745
231045-021: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-353-1807
Clamping Catch

143531807
GR.63-CB: RNCC: 3 | RNVC: 2
GR63CB: RNCC: 5 | RNVC: 2

8 Dec 1978

5340-14-508-3076
Plug Button

145083076
45139913: RNCC: 3 | RNVC: 2

2 Sep 1998

5340-14-501-3234
Access Cover

145013234
2320029700: RNCC: 3 | RNVC: 2
F300 0T 025 3646: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-475-4587
Access Cover

144754587
602Q546: RNCC: 3 | RNVC: 2
602Q546: RNCC: 5 | RNVC: 2

7 Apr 1995

5340-14-547-8426
Access Cover

145478426
61044533AA: RNCC: 3 | RNVC: 2

18 Nov 2005

5340-14-403-3621
Rod End Clevis

144033621
216341: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-551-2592
Cover Strip

145512592
RA1M701926471: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-448-0371
Cover Strip

144480371
PM1A239207003: RNCC: 3 | RNVC: 2
PM1A239207003: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-555-4122
Loop Clamp

145554122
78651RH10: RNCC: 1 | RNVC: 2
78651RH10: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-14-306-7675
Handwheel

143067675
401MA0586F6: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-520-0672
Access Cover

145200672
47134875: RNCC: 3 | RNVC: 2

10 May 2000

5340-14-530-6154
Utility Access Door

145306154
021312: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-14-432-8354
Mounting Bracket

144328354
2310106: RNCC: 3 | RNVC: 2
232740: RNCC: 5 | RNVC: 2

28 Jun 1989

5340-14-492-5705
Anchor Strap

144925705
5010003040: RNCC: 3 | RNVC: 2
F300 0T 008 0543: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-341-8182
Anchor Strap

143418182
713679: RNCC: 3 | RNVC: 2
5171367900: RNCC: 5 | RNVC: 2

14 Apr 1977

5340-14-524-3391
Access Cover

145243391
TB4011010: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-450-8877
Angle Bracket

144508877
PM1A312801014: RNCC: 3 | RNVC: 2
PM1A312801014: RNCC: 5 | RNVC: 2

23 Oct 1991

5340-14-551-9780
Mounting Bracket

145519780
82161122000: RNCC: 3 | RNVC: 2

15 Nov 2006

5340-14-455-5679
Mounting Bracket

144555679
1060228: RNCC: 3 | RNVC: 2
1060228: RNCC: 5 | RNVC: 9
5044661: RNCC: 5 | RNVC: 9

28 May 1992

5340-14-476-3523
Mounting Plate

144763523
9301190028: RNCC: 3 | RNVC: 2

7 Jun 1995

5340-14-535-1583
Mounting Bracket

145351583
5000991966: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-545-7994
Mounting Bracket

145457994
10291658: RNCC: 3 | RNVC: 2

16 May 2005

5340-14-513-8065
Mounting Bracket

145138065
DE21805: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-354-7580
Retaining Strap

143547580
150672: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-475-9066
Protection Bellows

144759066
7700805540: RNCC: 3 | RNVC: 2

10 May 1995

5340-14-259-7195
Angle Bracket

142597195
217559: RNCC: 3 | RNVC: 2
217559: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-535-2451
Mounting Bracket

145352451
6501DDP120: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-346-1613
Access Cover

143461613
T70-2: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-551-2628
Mounting Bracket

145512628
RA1A702206167: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-509-0152
Metal Grille

145090152
0390301863: RNCC: 3 | RNVC: 2

14 Oct 1998

5340-14-523-2875
Retaining Band

145232875
RA1M701926361: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-502-0386
Bumper

145020386
K7572447: RNCC: 3 | RNVC: 2
72447: RNCC: 5 | RNVC: 2

26 Nov 1997

5340-14-224-7519
Lock-Release Lever

142247519
E21412MANETTEC0UDEEDE100CARRE10: RNCC: 2 | RNVC: 2

1 Jan 1966

5340-14-534-9652
Snap Hook

145349652
AJ561: RNCC: 3 | RNVC: 2
SC086044: RNCC: 6 | RNVC: 9

23 Apr 2003

5340-14-520-2218
Mounting Bracket

145202218
P606654: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-552-1652
Luggage Handle

145521652
8900000133: RNCC: 3 | RNVC: 2

29 Nov 2006

5340-14-466-0280
Mounting Bracket

144660280
75580011465: RNCC: 3 | RNVC: 2
75580011465: RNCC: 5 | RNVC: 9

27 Oct 1993

5340-14-475-3325
Webbing Strap

144753325
568128: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-14-423-7489
Angle Bracket

144237489
39233560: RNCC: 3 | RNVC: 2
39233560: RNCC: 5 | RNVC: 9

28 Apr 1988

5340-14-533-5144
Access Cover

145335144
20625917: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-457-1888
Access Cover

144571888
6220101: RNCC: 3 | RNVC: 2
5045219: RNCC: 5 | RNVC: 9

13 Aug 1992

5340-14-544-3125
Door Hook

145443125
AMPC GENE E220310: RNCC: 3 | RNVC: 2

19 Jan 2005

5340-14-506-7398
Mounting Bracket

145067398
BB4239: RNCC: 3 | RNVC: 2

13 May 1998

5340-14-526-9855
Mounting Bracket

145269855
44040016: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-516-1240
Mounting Bracket

145161240
1716010: RNCC: 3 | RNVC: 2
YA1112A00: RNCC: 5 | RNVC: 2

10 Sep 1999

5340-14-506-7037
Loop Clamp

145067037
0319738000: RNCC: 3 | RNVC: 2

11 May 1998

5340-14-472-3242
Mounting Bracket

144723242
DHV1265: RNCC: 3 | RNVC: 2

19 Oct 1994

5340-14-539-5643
Access Cover

145395643
10621370: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-399-1373
Rod End Clevis

143991373
617957: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-311-3609
Webbing Strap

143113609
187629: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-500-8085
Loop Clamp

145008085
E64704000000: RNCC: 3 | RNVC: 2
F300 0T 024 8285: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-504-2996
Mounting Bracket

145042996
3699322M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-378-9025
Anchor Strap

143789025
5000604799: RNCC: 3 | RNVC: 2
5000604799: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-14-514-8994
Access Cover

145148994
1111381902: RNCC: 3 | RNVC: 2
DAH1111381902: RNCC: 5 | RNVC: 9

23 Jun 1999

5340-14-471-7804
Mounting Bracket

144717804
5000658805: RNCC: 3 | RNVC: 2

14 Sep 1994

5340-14-503-6770
Mounting Bracket

145036770
10135443: RNCC: 3 | RNVC: 2

23 Jan 1998

5340-14-536-9849
Utility Access Door

145369849
8041: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-313-7038
Access Cover

143137038
0064767060: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-546-5828
Retaining Strap

145465828
RA1A706116034A1: RNCC: 3 | RNVC: 2

20 Jul 2005

5340-14-529-5578
Mounting Bracket

145295578
330A63-5174-07: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-371-3970
Access Cover

143713970
6254-21503: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-525-3063
Mounting Bracket

145253063
2 900 821 072: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-465-1562
Angle Bracket

144651562
365A25-5026-20: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-498-3163
Loop Clamp

144983163
PAA73-10-010-15: RNCC: 3 | RNVC: 2
91952651: RNCC: 3 | RNVC: 2
F300 0T 004 7828: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-443-6968
Mounting Bracket

144436968
C21CA0070-021: RNCC: 3 | RNVC: 2
C21CA0070-021: RNCC: 5 | RNVC: 2
C21CA0070-021: RNCC: 5 | RNVC: 9

5 Dec 1990

5340-14-462-7481
Mounting Plate

144627481
LBR532A201-420: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-14-518-4139
Loop Clamp

145184139
PPSHR1Z8-8PP: RNCC: 3 | RNVC: 9

4 Feb 2000

5340-14-468-1804
Angle Bracket

144681804
78704-60-060: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-432-8043
Butt Hinge

144328043
262-12-23086-01: RNCC: 3 | RNVC: 2
85-693-8153: RNCC: 6 | RNVC: 9

27 Jun 1989

5340-14-502-6581
Mounting Bracket

145026581
243-40602-11: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-361-3864
Rod End Clevis

143613864
M101-188-5F: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-254-9703
Mending Plate

142549703
321A75-7070-20: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-533-6790
Mounting Bracket

145336790
169E431-01: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-14-368-8330
Loop Clamp

143688330
NO PRIMARY REF14-368-8330: RNCC: 3 | RNVC: 2
362936REPU28: RNCC: 5 | RNVC: 9

10 Mar 1981

5340-14-307-2220
Synchro Clamp

143072220
M5A701-29-810: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-475-6157
Mounting Plate

144756157
APE9290-42690A: RNCC: 3 | RNVC: 2
85-695-4271: RNCC: 6 | RNVC: 9

19 Apr 1995

5340-14-461-6496
Retaining Bail

144616496
PL1DA002OR901021A: RNCC: 3 | RNVC: 2

19 Mar 1993

5340-14-520-0445
Utility Access Door

145200445
F00207725: RNCC: 3 | RNVC: 2
F00207725: RNCC: 5 | RNVC: 9

5 May 2000

5340-14-459-1956
Mounting Plate

144591956
101A103032: RNCC: 3 | RNVC: 2

19 Nov 1992

5340-14-517-2142
Loop Clamp

145172142
210600950: RNCC: 3 | RNVC: 2
21F9-5: RNCC: 5 | RNVC: 2
9562811260: RNCC: 5 | RNVC: 2
21F9-5: RNCC: 5 | RNVC: 9

17 Nov 1999

5340-14-469-6384
Rod End Connector

144696384
PM1A471016011: RNCC: 3 | RNVC: 2
PM1A471016011: RNCC: 5 | RNVC: 2

4 May 1994

5340-14-300-8156
Angle Bracket

143008156
2-14627: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-555-3976
Access Cover

145553976
5853448P00: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-14-450-2068
Protection Bellows

144502068
5000438204: RNCC: 3 | RNVC: 2
5000438204: RNCC: 5 | RNVC: 9

25 Sep 1991

5340-14-500-9157
Mounting Bracket

145009157
D66504610000: RNCC: 3 | RNVC: 2
F300 0T 024 9366: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-303-4969
Anchor Strap

143034969
NO PRIMARY REF14-303-4969: RNCC: 3 | RNVC: 2
48-02-30-095: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-551-6958
Access Cover

145516958
2CW1918: RNCC: 3 | RNVC: 2

17 Oct 2006

5340-14-418-6734
Angle Bracket

144186734
413002020021: RNCC: 3 | RNVC: 2

9 Sep 1987

5340-14-244-9635
Access Cover

142449635
49295: RNCC: 3 | RNVC: 2
61.11.037: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-217-8951
Loop Clamp

142178951
3160S41-11-080: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-545-4951
Access Cover

145454951
F00286755: RNCC: 3 | RNVC: 2
F00286755: RNCC: 5 | RNVC: 2

14 Apr 2005

5340-14-352-7247
Runner

143527247
573898304: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-455-3929
Locking Stay

144553929
16292782: RNCC: 3 | RNVC: 2
16292782: RNCC: 5 | RNVC: 9

21 May 1992

5340-14-421-7636
Access Cover

144217636
20326948: RNCC: 3 | RNVC: 2
20326948: RNCC: 5 | RNVC: 9

27 Jan 1988

5340-14-520-8323
Access Cover

145208323
ECS31LB2: RNCC: 3 | RNVC: 2
ECS31LB2: RNCC: 5 | RNVC: 2

14 Jun 2000

5340-14-394-2735
Plug Button

143942735
020-1DES020103: RNCC: 3 | RNVC: 2

28 Aug 1984

5340-14-383-1948
Quick Release Pin

143831948
9501TMA1052: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-228-0734
Mounting Bracket

142280734
0077130460: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-231-0916
Loop Clamp

142310916
203100650: RNCC: 3 | RNVC: 2
20G6-5: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-296-9178
Rod End Connector

142969178
454302557: RNCC: 3 | RNVC: 9

1 Jan 1973

5340-14-511-0811
Mortise Lock

145110811
2443007: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-14-383-9846
Loop Clamp

143839846
531784: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-505-9306
Mounting Bracket

145059306
10303: RNCC: 3 | RNVC: 2

30 Mar 1998

5340-14-522-6045
Mounting Bracket

145226045
3828H006: RNCC: 3 | RNVC: 2

8 Nov 2000

5340-14-348-1881
Retaining Strap

143481881
C47748: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-365-7646
Mounting Plate

143657646
3161854: RNCC: 3 | RNVC: 2
91780820: RNCC: 5 | RNVC: 2
99900155: RNCC: 5 | RNVC: 2

8 Oct 1980

5340-14-532-6748
Mounting Bracket

145326748
19221773: RNCC: 3 | RNVC: 2

27 Nov 2002

5340-14-308-1403
Retaining Strap

143081403
501-426-026-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-523-9905
Access Cover

145239905
15289A: RNCC: 3 | RNVC: 2

19 Feb 2001

5340-14-454-7304
Rod End Clevis

144547304
PM1A248020400A1: RNCC: 3 | RNVC: 2
PM1A248020400A1: RNCC: 5 | RNVC: 2

9 Apr 1992

5340-14-450-5017
Bow Handle

144505017
5000988762: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-14-443-5574
Mounting Plate

144435574
7524-0001053: RNCC: 3 | RNVC: 9
CAP230-70-14-02B: RNCC: 5 | RNVC: 9

28 Nov 1990

5340-14-524-1911
Cable Retractor

145241911
01417000: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-324-3624
Rim Lock

143243624
69: RNCC: 3 | RNVC: 9

1 Jan 1975

5340-14-554-1745
Angle Bracket

145541745
82071323000: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-370-7275
Access Cover

143707275
215377: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-534-1930
Retaining Bail

145341930
NNM0034068002260: RNCC: 2 | RNVC: 2

14 Mar 2003

5340-14-342-4989
Retaining Strap

143424989
530407: RNCC: 3 | RNVC: 2

16 May 1977

5340-14-474-8079
Plug Button

144748079
45675422: RNCC: 3 | RNVC: 9

1 Mar 1995

5340-14-301-1510
Anchor Strap

143011510
3511-960-03771: RNCC: 3 | RNVC: 2
3511 960 03771: RNCC: 5 | RNVC: 2
MQ00377: RNCC: 5 | RNVC: 2
3511 960 03771: RNCC: 5 | RNVC: 2
80-300-300: RNCC: 5 | RNVC: 2
80-300300: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-496-3028
Access Cover

144963028
4652819A: RNCC: 3 | RNVC: 2
F300 0T 021 3661: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-533-9848
Mounting Bracket

145339848
400640: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-447-3748
Door Hook

144473748
39360203: RNCC: 3 | RNVC: 9

15 May 1991

5340-14-461-0040
Mounting Bracket

144610040
5010002463: RNCC: 3 | RNVC: 2

17 Feb 1993

5340-14-519-7670
Plug Button

145197670
10531216: RNCC: 3 | RNVC: 2

5 Apr 2000

5340-14-470-8992
Access Cover

144708992
T1647AA56: RNCC: 3 | RNVC: 2
T1647AA56: RNCC: 5 | RNVC: 9

13 Jul 1994

5340-14-552-0325
Access Cover

145520325
0177100170: RNCC: 3 | RNVC: 2

21 Nov 2006

5340-14-460-0760
Rod End Clevis

144600760
PM1A725374402U1: RNCC: 3 | RNVC: 2
PM1A725374402U1: RNCC: 5 | RNVC: 2

7 Jan 1993

5340-14-529-4601
Access Cover

145294601
413746: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-459-3610
Anchor Strap

144593610
0607386400: RNCC: 3 | RNVC: 2

26 Nov 1992

5340-14-521-1525
Access Cover

145211525
F1262612: RNCC: 3 | RNVC: 2

12 Jul 2000

5340-14-303-3815
Access Cover

143033815
24C1761: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-316-1671
Access Cover

143161671
458996: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-332-5673
Access Cover

143325673
79057953: RNCC: 3 | RNVC: 2
79057953: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-488-4914
Mounting Plate

144884914
45828472: RNCC: 3 | RNVC: 9

14 May 1997

5340-14-310-2254
Access Cover

143102254
8160-27DET3: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-374-0730
Loop Clamp

143740730
330A87-3236-00: RNCC: 3 | RNVC: 2
330A-87-3236-00: RNCC: 5 | RNVC: 2

8 Dec 1981

5340-14-031-6143
Retaining Strap

140316143
J00986-01-1210P004: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-473-3825
Mounting Plate

144733825
332A25-1297-20: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-384-9355
Rod End Clevis

143849355
PE66023: RNCC: 3 | RNVC: 2
85-800-9975: RNCC: 6 | RNVC: 9

2 Jun 1983

5340-14-342-3820
Loop Clamp

143423820
S1V12-242532: RNCC: 3 | RNVC: 2

16 May 1977

5340-14-519-5951
Mounting Plate

145195951
191-1-03-102: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-378-5512
Mounting Plate

143785512
6801J33-4008-00: RNCC: 3 | RNVC: 2
6801360A33-4008-00: RNCC: 5 | RNVC: 2

11 Aug 1982

5340-14-540-5252
Butt Hinge

145405252
10553247: RNCC: 3 | RNVC: 2
C6-26: RNCC: 3 | RNVC: 2

1 Apr 2004

5340-14-389-1084
Corner Brace

143891084
366A21-1153-5601: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-438-7749
Access Cover

144387749
330A93-2041-11: RNCC: 3 | RNVC: 2

4 Apr 1990

5340-14-399-0236
Anchor Strap

143990236
NO PRIMARY REF14-399-0236: RNCC: 3 | RNVC: 2
34470: RNCC: 5 | RNVC: 9
D20-34470: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-339-6223
Access Cover

143396223
0274601690: RNCC: 3 | RNVC: 2
302-126-002P: RNCC: 5 | RNVC: 2

18 Jan 1977

5340-14-333-5109
Runner

143335109
A519-57: RNCC: 3 | RNVC: 2

8 Feb 2001

5340-14-297-7392
Angle Bracket

142977392
536-418-013DET7: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-446-0300
Mounting Plate

144460300
084-01-145: RNCC: 3 | RNVC: 2

4 Mar 1991

5340-14-541-8269
Metal Grille

145418269
88179-1139: RNCC: 3 | RNVC: 2

26 Jun 2004

Load More Results