5340-14-567-2794

Primary Buy RNCC 3 RNVC 2 DAC 4 NSA8603-387 C2178 https//www.nsnlookup.com /fsg-53/fsc-5340/fr 5340-14-567-2794
Loop Clamp 5340145672794 145672794 2 DAC 5 4369A487M 00624 - Eaton Aeroquip Llc (Active) Primary
Buy RNCC 3 RNVC 2 DAC 4 NSA8603-487 C2178 Restrictions 5340-14-572-7011 DEMIL: | DEMILI : | CRITICALITY

DAC: 3 2 Jul 1996 5340-14-575-0378 Loop Clamp NSA8601-09RNCC: 3 | RNVC: 2 | DAC: 4 8 Mar 2013 5340-14-567-2794

5340-14-576-4704 5340145764704 145764704 is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. includes straight flexible items. for items specifically designed to clamp a hose to a connection to prevent leakage, see clamp, hose. see also hanger, pipe and clip, spring tension. for retaining straps with a bridge, see strap, retaining. excludes clamp, electrical; band, retaining; clamp (1), c; bracket pipe.

5310-15-150-1487 5310151501487 151501487 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

3020-25-150-1487 3020251501487 251501487 is an item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. the free gear is attached to the fixed gear by springs and operates as one gear. upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. this spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. the gear is used where identical and accurate transmitted motion between gears is required.