5340-14-507-9279

Apr 2010 9505-14-465-2130 https//www.nsnlookup.com /cage Dejoie (CAGE Code F5017) 13 Oct 1999 5340-14-507-9279

1975 5340-14-516-7239 Antipilferage Seal PLOMB-NUMERO4RNCC: 3 | RNVC: 2 | DAC: 5 13 Oct 1999 5340-14-507-9279

DAC: 4 21 Aug 2007 5340-21-846-8457 Antipilferage Seal 62RNCC: 3 | RNVC: 1 | DAC: 5 6 Jun 1968 5340-14-507-9279

5310-33-107-8503 5310331078503 331078503 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5310-33-107-8506 5310331078506 331078506 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.