Premium Information is available for this item - Upgrade for $1 a day


Retaining Strap

5340145005157 145005157 2710 F300 0T 024 5330

A preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING. View more Retaining Strap

5340-14-500-5157 STRAP,RETAINING 5340145005157 145005157

Managed by France
NSN Created on 29 Oct 1997
Data Last Changed
July 2023
NATO Update Count
NATO Data Quality
5340-14-500-5157 STRAP,RETAINING 5340145005157 145005157 1/1
NSN 5340-14-500-5157 (Generic Image) 1/1

5340-14-500-5157 Stock and Availability Marketplace 5340-14-500-5157

Need Help?
Request a Quotation from participating marketplace vendors

5340-14-500-5157 Related Documents Related Documents 5340-14-500-5157 5+ Documents (More...)

RNVC: 9 | DAC: 4 2 Jul 1975 5940-14-223-6597 Cosse 155475PRNCC: 3 | RNVC: 9 | DAC: 6 1 Jan 1966 5340-14-500-5157
4730-12-359-0449 4730123590449 123590449 is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
4330-12-164-2665 4330121642665 121642665 is a replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. the removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. it may be designed to fit into a filter, fluid (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. the degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. excludes filter element, air conditioning. see also strainer element, sediment.
5310-99-546-5524 5310995465524 995465524 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5340-14-500-5157 Demil Restrictions 5340-14-500-5157


5340-14-500-5157 is a Retaining Strap

5340-14-500-5157 End Users End Users 5340-14-500-5157

France (ZF)

5340-14-500-5157 Related Items NATO Stock Numbers Related to 5340-14-500-5157