What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 53 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 53 of 446

5340-14-333-7235
Doorknob

143337235
9102-16: RNCC: 3 | RNVC: 2

23 Apr 1976

5340-14-364-8942
Pipe Hanger

143648942
321A75-0152-11: RNCC: 3 | RNVC: 2
85-691-0536: RNCC: 6 | RNVC: 9

2 Sep 1980

5340-14-410-6236
Access Cover

144106236
1909-21-08: RNCC: 3 | RNVC: 9

9 Jul 1986

5340-14-290-2217
Sliding Door Track

142902217
330A21-2010-23: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-338-1968
Bow Handle

143381968
903314-1: RNCC: 3 | RNVC: 2
85-689-1623: RNCC: 6 | RNVC: 9

6 Nov 1976

5340-14-418-1089
Runner

144181089
NO PRIMARY REF14-418-1089: RNCC: 3 | RNVC: 2
4256-3: RNCC: 5 | RNVC: 9

6 Aug 1987

5340-14-464-9479
Rod End Clevis

144649479
9970-147-412: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-463-6966
Mounting Bracket

144636966
F7987 3088-88: RNCC: 3 | RNVC: 2
3088-88: RNCC: 5 | RNVC: 9

23 Jun 1993

5340-14-429-1065
Angle Bracket

144291065
A10-11-355-09-2: RNCC: 3 | RNVC: 2
A10-11-355-09-2: RNCC: 5 | RNVC: 2
85-693-7021: RNCC: 6 | RNVC: 9

11 Jan 1989

5340-14-526-0769
Arched Cushion

145260769
E1M371630: RNCC: 3 | RNVC: 2
MAT169-0024F17FORTERAIDEUR: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-14-412-8135
Angle Bracket

144128135
M198-1-04-32: RNCC: 3 | RNVC: 2

5 Nov 1986

5340-14-413-5080
Runner

144135080
2-1451-01: RNCC: 3 | RNVC: 2
91598549: RNCC: 5 | RNVC: 2

17 Dec 1986

5340-14-440-5929
Synchro Clamp

144405929
10-89-011D2: RNCC: 3 | RNVC: 2

18 Jul 1990

5340-14-465-1516
Rod End Clevis

144651516
365A25-3318-01: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-435-3888
Butt Hinge

144353888
43-1-3524: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-358-5185
Retaining Strap

143585185
6413-02036: RNCC: 3 | RNVC: 2
6413-02036-13: RNCC: 5 | RNVC: 2

7 Sep 1979

5340-14-321-6181
Angle Bracket

143216181
NO PRIMARY REF14-321-6181: RNCC: 3 | RNVC: 2
5100100935: RNCC: 5 | RNVC: 2
E137D1670: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-382-1632
Access Cover

143821632
341A81-1815-00: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-341-1864
Access Cover

143411864
M3B702-29-02: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-326-1614
Detent Plunger

143261614
6830-4277: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-520-0907
Mounting Bracket

145200907
3L85-131: RNCC: 3 | RNVC: 2

10 May 2000

5340-14-369-1171
Bumper

143691171
2288-25: RNCC: 3 | RNVC: 2
2288-25S: RNCC: 5 | RNVC: 2

17 Apr 1981

5340-14-468-5261
Angle Bracket

144685261
Z00094-03-0000P003: RNCC: 3 | RNVC: 2
362432-001: RNCC: 5 | RNVC: 9

3 Mar 1994

5340-14-455-4366
Runner

144554366
2327-13-00: RNCC: 3 | RNVC: 2
2327-13-00: RNCC: 5 | RNVC: 2
89233046: RNCC: 5 | RNVC: 2
91632534: RNCC: 5 | RNVC: 2
5000816397: RNCC: 5 | RNVC: 2

21 May 1992

5340-14-293-1865
Rod End Clevis

142931865
A10-76-220-32-0: RNCC: 3 | RNVC: 2
A10-76-220-32-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-354-5852
Rod End Clevis

143545852
A10-76-008-19-0: RNCC: 3 | RNVC: 2
A10-76-008-19-0: RNCC: 5 | RNVC: 2
85-800-6512: RNCC: 6 | RNVC: 9

31 Jan 1979

5340-14-231-9834
Retaining Clip

142319834
A622UAE59-21: RNCC: 3 | RNVC: 2
A622UAE59: RNCC: 5 | RNVC: 2
78622AK21L: RNCC: 5 | RNVC: 2
A622-21AKL: RNCC: 5 | RNVC: 2
59-21AKL: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-295-0515
Mending Plate

142950515
A10-76-120-05-0: RNCC: 3 | RNVC: 2
A10-76-120-05-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-457-4835
Loop Clamp

144574835
MAT169-0029F8: RNCC: 3 | RNVC: 2

8 Sep 1992

5340-14-358-5919
Quick Release Pin

143585919
5001BTV1040803: RNCC: 3 | RNVC: 2
5001BTV10-40-803: RNCC: 5 | RNVC: 2

7 Sep 1979

5340-14-503-2866
Angle Bracket

145032866
332A69-1329-62: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-473-8255
Mounting Bracket

144738255
332A41-0408-00: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-328-0000
Butt Hinge

143280000
5146-0RM55: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-537-1799
Self-Locking Insert

145371799
MAT214-1404F12: RNCC: 3 | RNVC: 2

10 Oct 2003

5340-14-532-2104
Access Cover

145322104
A065-400-000A: RNCC: 3 | RNVC: 2

18 Oct 2002

5340-14-419-4019
Access Cover

144194019
663-44553-00-EJ: RNCC: 3 | RNVC: 2

16 Oct 1987

5340-14-511-8572
Access Cover

145118572
5810-2002: RNCC: 3 | RNVC: 2

27 Jan 1999

5340-14-541-5098
Mounting Plate

145415098
1091141: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-480-8276
Access Cover

144808276
45084406: RNCC: 3 | RNVC: 2
45084406: RNCC: 5 | RNVC: 9

4 Apr 1996

5340-14-494-0444
Access Cover

144940444
1070981: RNCC: 3 | RNVC: 2
F300 0T 015 1324: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-445-0518
Detent Plunger

144450518
532291: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-14-419-0776
Buckle

144190776
200B: RNCC: 3 | RNVC: 2
RAPC0200B: RNCC: 5 | RNVC: 2
RAPCO 200B: RNCC: 5 | RNVC: 2

30 Sep 1987

5340-14-385-4659
Bail Handle

143854659
BB2555: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-289-3968
Retaining Strap

142893968
632156: RNCC: 3 | RNVC: 2
20632156-2: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-524-6775
Cover Strip

145246775
504333: RNCC: 3 | RNVC: 2

4 Apr 2001

5340-14-470-3426
Utility Access Door

144703426
802290140611: RNCC: 3 | RNVC: 2
802290140611: RNCC: 5 | RNVC: 9
SDM802290140611: RNCC: 5 | RNVC: 9

15 Jun 1994

5340-14-548-9255
Angle Bracket

145489255
10711365000: RNCC: 3 | RNVC: 2

23 Feb 2006

5340-14-333-2579
Furniture Cup

143332579
16666810: RNCC: 3 | RNVC: 2
16666810: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-466-6827
Dashpot

144666827
083127: RNCC: 3 | RNVC: 2
14061520-6: RNCC: 5 | RNVC: 2

24 Nov 1993

5340-14-372-2789
Flush Lock

143722789
1160A: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-532-5456
Pawl Fastener

145325456
4050K: RNCC: 3 | RNVC: 9
0000140014: RNCC: 5 | RNVC: 2

13 Nov 2002

5340-14-463-3223
Retaining Strap

144633223
42060106877: RNCC: 3 | RNVC: 2
91016: RNCC: 5 | RNVC: 2

9 Jun 1993

5340-14-361-8161
Swivel Caster

143618161
CPK125: RNCC: 3 | RNVC: 9

20 Feb 1980

5340-14-552-6288
Angle Bracket

145526288
RA1M701513271: RNCC: 3 | RNVC: 2

18 Jan 2007

5340-14-381-6001
Retaining Strap

143816001
6102: RNCC: 3 | RNVC: 9
6102: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-454-2574
Angle Bracket

144542574
16211873: RNCC: 3 | RNVC: 2

26 Mar 1992

5340-14-392-8794
Angle Bracket

143928794
574024424: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-454-2890
Handwheel

144542890
MLA1310209: RNCC: 3 | RNVC: 2

26 Mar 1992

5340-14-551-4929
Retaining Strap

145514929
RA1B216901631A2: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-472-2024
Mounting Bracket

144722024
DTV66113: RNCC: 3 | RNVC: 2

12 Oct 1994

5340-14-448-9153
Pawl Fastener

144489153
1187D: RNCC: 3 | RNVC: 2
163737032: RNCC: 5 | RNVC: 9

24 Jul 1991

5340-14-300-0384
Strap Fastener Loop

143000384
13311-217: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-435-6210
Mounting Plate

144356210
403636: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-14-440-4303
Block Fairlead

144404303
PM1A272150: RNCC: 3 | RNVC: 2
PM1A272150: RNCC: 5 | RNVC: 2

11 Jul 1990

5340-14-549-0609
Angle Bracket

145490609
RA1M216900511A1N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-416-3145
Control Rod

144163145
14-15-23: RNCC: 3 | RNVC: 9

3 Jun 1987

5340-14-280-4343
Angle Bracket

142804343
6061: RNCC: 3 | RNVC: 2
6061: RNCC: 5 | RNVC: 2
CHR6061: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-314-3878
Angle Bracket

143143878
CH37-1-3: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-370-4179
Door Closer

143704179
RM100-4: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-406-8972
Clamping Catch

144068972
16-7-3525: RNCC: 3 | RNVC: 2

14 Jan 1986

5340-14-325-1643
Loop Clamp

143251643
4315974: RNCC: 3 | RNVC: 2
4315974: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-381-5498
Angle Bracket

143815498
398002040002: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-400-0263
Angle Bracket

144000263
23105019-3: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-407-7321
Bow Handle

144077321
28923: RNCC: 3 | RNVC: 9

27 Feb 1986

5340-14-398-9687
Angle Bracket

143989687
574024511: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-287-8619
Webbing Strap

142878619
AL43-1: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-396-6086
Bumper

143966086
1107-26S: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-549-3542
Utility Access Door

145493542
8256-2: RNCC: 3 | RNVC: 2

24 Mar 2006

5340-14-482-9209
Pipe Hanger

144829209
78732-020-038B: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-522-9168
Access Cover

145229168
24-37-65-2: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-14-395-5082
Access Cover

143955082
5-1881B43152-753: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-495-2258
Mounting Bracket

144952258
NO PRIMARY REF14-495-2258: RNCC: 3 | RNVC: 2
20557P: RNCC: 5 | RNVC: 9
F300 0T 018 6641: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-389-4686
Rod End Connector

143894686
365A58-1102-NR01: RNCC: 3 | RNVC: 2
365A58-1102NR01: RNCC: 5 | RNVC: 2

20 Dec 1983

5340-14-041-2583
Handwheel

140412583
VLQ10 3 06 R2272: RNCC: 3 | RNVC: 2
VLQ10-3-6R2272: RNCC: 5 | RNVC: 2
91376249: RNCC: 5 | RNVC: 2
R2272: RNCC: 5 | RNVC: 9
VLQ10-3-6: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-356-0813
Bridge Clamp

143560813
556135-00: RNCC: 3 | RNVC: 2
556135: RNCC: 5 | RNVC: 2
1283S4-2-2: RNCC: 5 | RNVC: 9
SOG556135-00: RNCC: 5 | RNVC: 9
85-689-7433: RNCC: 6 | RNVC: 9

5 Apr 1979

5340-14-302-8830
Threaded Rod End

143028830
NO PRIMARY REF14-302-8830: RNCC: 3 | RNVC: 2
31-3761-0: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-496-1820
Mounting Plate

144961820
71589-6: RNCC: 3 | RNVC: 2
F300 0T 020 9999: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-469-7226
Shelf Bracket

144697226
332A64-1157-6401: RNCC: 3 | RNVC: 2

4 May 1994

5340-14-299-3335
Pipe Hanger

142993335
MY20516-1706: RNCC: 3 | RNVC: 2
MY20-516-17-06: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-375-4739
Retaining Strap

143754739
319A75-10-111: RNCC: 3 | RNVC: 2
319A-75-10-111: RNCC: 5 | RNVC: 2

26 Feb 1982

5340-14-379-1934
Retaining Strap

143791934
A58760: RNCC: 3 | RNVC: 2
85-691-9746: RNCC: 6 | RNVC: 9

6 Sep 1982

5340-14-422-5715
Quick Release Pin

144225715
4772107250: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-14-505-3428
Loop Clamp

145053428
RSGU1-40-20-W1: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-327-5625
Bow Handle

143275625
570603001: RNCC: 3 | RNVC: 2
570603G001: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-304-2653
Flush Catch Claw

143042653
TH20B2658: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-311-9338
Rod End Connector

143119338
16293030: RNCC: 3 | RNVC: 2
16293030: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-370-3264
Plug Button

143703264
NO PRIMARY REF14-370-3264: RNCC: 3 | RNVC: 2
DP562-2653: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-507-6315
Mounting Bracket

145076315
5010118553: RNCC: 3 | RNVC: 2
314780-1062: RNCC: 5 | RNVC: 2

30 Jul 1998

5340-14-465-3007
Mounting Bracket

144653007
365A81-0373-21: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-413-9749
Angle Bracket

144139749
ST406M52P456: RNCC: 3 | RNVC: 2
50-1017: RNCC: 5 | RNVC: 2

22 Jan 1987

5340-14-542-1238
Mounting Plate

145421238
5302835-046-01: RNCC: 3 | RNVC: 2

7 Jul 2004

5340-14-533-4672
Mounting Bracket

145334672
SZ55.700.345: RNCC: 3 | RNVC: 2
55-700-345: RNCC: 5 | RNVC: 9

5 Feb 2003

5340-14-437-3933
Handwheel

144373933
661-161: RNCC: 3 | RNVC: 2
NLM661-161: RNCC: 5 | RNVC: 2

31 Jan 1990

5340-14-411-1607
Rod End Clevis

144111607
332A27-2244-20: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-456-8722
Arched Cushion

144568722
F0143-009F18TAB2DE14: RNCC: 3 | RNVC: 2
MAT169-0012F20DE14: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-14-520-7368
Arched Cushion

145207368
MAT169-0027F19DE42: RNCC: 3 | RNVC: 2

6 Jun 2000

5340-14-433-5577
Utility Access Door

144335577
NO PRIMARY REF14-433-5577: RNCC: 3 | RNVC: 2
1436904: RNCC: 5 | RNVC: 2
1436904: RNCC: 5 | RNVC: 9

2 Aug 1989

5340-14-472-7407
Plug Button

144727407
330A33-3136-21: RNCC: 3 | RNVC: 2

9 Nov 1994

5340-14-435-2799
Mounting Bracket

144352799
332A21-1205-01: RNCC: 3 | RNVC: 2

2 Nov 1989

5340-14-449-8276
Angle Bracket

144498276
993-02-03: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-14-473-6114
Access Cover

144736114
452-14706-000: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-506-9476
Butt Hinge

145069476
HL52-400300: RNCC: 3 | RNVC: 2

27 May 1998

5340-14-301-4472
Butt Hinge

143014472
P26-306-80X40DR0ULEEAC: RNCC: 2 | RNVC: 2

1 Jan 1973

5340-14-438-4547
Casement Fastener

144384547
332A22-1301-0183: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-489-6515
Mounting Bracket

144896515
332A22-1176-2151: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-486-0643
Mounting Bracket

144860643
332A87-0501-03: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-542-4597
Mounting Bracket

145424597
G040-100-002B: RNCC: 3 | RNVC: 2

16 Jul 2004

5340-14-541-1457
Loop Clamp

145411457
GBS-78-20-W2: RNCC: 3 | RNVC: 2

14 May 2004

5340-14-465-6797
Mounting Plate

144656797
A967601: RNCC: 3 | RNVC: 2
A96760-1: RNCC: 3 | RNVC: 2
91710995: RNCC: 5 | RNVC: 2
A967601: RNCC: 5 | RNVC: 2
A96760-1: RNCC: 5 | RNVC: 9
A96760-1: RNCC: 5 | RNVC: 9

6 Oct 1993

5340-14-327-8505
Quick Release Pin

143278505
7-090-14-1250: RNCC: 3 | RNVC: 2
51277-1-969: RNCC: 5 | RNVC: 9
85-800-4292: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-388-3389
Quick Release Pin

143883389
2705-20-05: RNCC: 3 | RNVC: 2

3 Nov 1983

5340-14-488-4054
Access Cover

144884054
T4223323: RNCC: 3 | RNVC: 2
T42233-23: RNCC: 5 | RNVC: 2

7 May 1997

5340-14-419-7113
Retaining Strap

144197113
M427-401483: RNCC: 3 | RNVC: 2

5 Nov 1987

5340-14-299-3301
Pipe Hanger

142993301
MY20515-17810: RNCC: 3 | RNVC: 2
MY20-515-17-810: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-547-0981
Mounting Plate

145470981
399-008-136-0: RNCC: 3 | RNVC: 2

22 Sep 2005

5340-14-339-9840
Mortise Lock Set

143399840
NO PRIMARY REF14-339-9840: RNCC: 3 | RNVC: 2
667: RNCC: 5 | RNVC: 9

18 Jan 1977

5340-14-473-2331
Mounting Bracket

144732331
350A53-1052-03: RNCC: 3 | RNVC: 2

7 Dec 1994

5340-14-502-9644
Pipe Hanger

145029644
440876: RNCC: 3 | RNVC: 2
440876-003: RNCC: 5 | RNVC: 9

17 Dec 1997

5340-14-542-0097
Mounting Plate

145420097
20044-165: RNCC: 3 | RNVC: 2
502118001010A: RNCC: 3 | RNVC: 9
2 0044-165: RNCC: 5 | RNVC: 2

2 Jul 2004

5340-14-464-8296
Mortise Lock Set

144648296
484C-1-1N: RNCC: 3 | RNVC: 2

1 Sep 1993

5340-14-260-3672
Cover Strip

142603672
3160S25-24-047: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-465-2780
Mounting Bracket

144652780
365A61-3014-2001: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-464-8908
Mounting Bracket

144648908
312-12481-001: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-293-8911
Bumper

142938911
EQDIV43-04-2: RNCC: 3 | RNVC: 2
EQDIV43-04REP2: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-489-9950
Loop Clamp

144899950
304-091-001-0: RNCC: 3 | RNVC: 2

3 Sep 1997

5340-14-308-7310
Access Cover

143087310
A10-64-263-02-0: RNCC: 3 | RNVC: 2
A10-64-263-02-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-301-4548
Eye Hook

143014548
J36-133-80GLAIT: RNCC: 2 | RNVC: 2

1 Jan 1973

5340-14-266-2497
Strap Fastener Loop

142662497
11606-035: RNCC: 3 | RNVC: 2
10F81: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-439-3086
Retaining Strap

144393086
C58000-334: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-330-5790
Section Block Clamp

143305790
319A69-20-014: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-404-0422
Sliding Door Track

144040422
366A25-1170-0605: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-348-8796
Retaining Strap

143488796
300-689-501-0: RNCC: 3 | RNVC: 2
300-689-501P: RNCC: 5 | RNVC: 2
001401010A: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-290-0896
Retaining Strap

142900896
880000-10: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-328-6603
Retaining Strap

143286603
D00260-85: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-423-7925
Swivel Caster

144237925
SD4-125-33R: RNCC: 3 | RNVC: 2
91520042: RNCC: 5 | RNVC: 2
91520042: RNCC: 5 | RNVC: 9

28 Apr 1988

5340-14-340-3132
Pipe Hanger

143403132
M3C704-052: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-530-1043
Handle Grip

145301043
05520-06: RNCC: 3 | RNVC: 2
0552004: RNCC: 5 | RNVC: 2

14 May 2002

5340-14-285-6182
Mounting Plate

142856182
3511-987-16611: RNCC: 3 | RNVC: 2
SW71661: RNCC: 5 | RNVC: 2
3511 987 16611: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-479-3654
Angle Bracket

144793654
3511 312 81241: RNCC: 3 | RNVC: 2
3511-312-81241: RNCC: 5 | RNVC: 2
3511-312-81241: RNCC: 5 | RNVC: 9

10 Jan 1996

5340-14-484-7226
Swivel Caster

144847226
SP4PD125-23L30: RNCC: 3 | RNVC: 2
1118219Q00: RNCC: 5 | RNVC: 2

5 Dec 1996

5340-14-448-0105
Loop Clamp

144480105
1700-10: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-513-2469
Bridge Clamp

145132469
EA5M701-15-645: RNCC: 3 | RNVC: 2

10 Mar 1999

5340-14-290-1894
Retaining Strap

142901894
4130260101: RNCC: 3 | RNVC: 2
K110322: RNCC: 5 | RNVC: 2
K413-0260-101: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-379-2137
Loop Clamp

143792137
3-2606-02-20D: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-220-5112
Loop Clamp

142205112
3160S23-11-060: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-484-2692
Mounting Bracket

144842692
3130S78-10-326: RNCC: 3 | RNVC: 2
31307810326: RNCC: 5 | RNVC: 2

31 Oct 1996

5340-14-537-3465
Retaining Band

145373465
MAT169-0010F10/F11D26,67A26,9: RNCC: 3 | RNVC: 2

21 Oct 2003

5340-14-559-2479
Utility Resilient Mount

145592479
CBSS1600-25IM2: RNCC: 3 | RNVC: 2

16 Dec 2008

5340-14-443-3451
Synchro Clamp

144433451
1334T03-06: RNCC: 3 | RNVC: 2
76169: RNCC: 5 | RNVC: 2
1334T03-06: RNCC: 5 | RNVC: 9

19 Nov 1990

5340-14-523-8326
Pipe Hanger

145238326
EA1M704-60-815: RNCC: 3 | RNVC: 2

6 Feb 2001

5340-14-235-6360
Expansion Plug

142356360
E29584-38A: RNCC: 2 | RNVC: 2
202378: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-488-4277
Mortise Lock

144884277
1430403: RNCC: 3 | RNVC: 2

7 May 1997

5340-14-441-0053
Access Cover

144410053
400-4-005553: RNCC: 3 | RNVC: 2

9 Aug 1990

5340-14-361-9168
Bumper

143619168
501-999-073-0: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-399-0764
Mending Plate

143990764
8727121-001: RNCC: 3 | RNVC: 2
8727121001: RNCC: 5 | RNVC: 2

6 Mar 1985

5340-14-411-5916
Key Holder

144115916
038048: RNCC: 3 | RNVC: 2
4520018: RNCC: 5 | RNVC: 2
3245060380489: RNCC: 5 | RNVC: 2
380-48: RNCC: 5 | RNVC: 2
38048: RNCC: 5 | RNVC: 2
5315253: RNCC: 5 | RNVC: 9
LG38048: RNCC: 5 | RNVC: 9

26 Aug 1986

5340-14-473-6469
Bow Handle

144736469
332A22-1377-01: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-461-2213
Pipe Hanger

144612213
054392-853-921: RNCC: 3 | RNVC: 9
7703079385: RNCC: 5 | RNVC: 2
054392853921: RNCC: 5 | RNVC: 9
054392-853921: RNCC: 5 | RNVC: 9

3 Mar 1993

5340-14-517-8630
Bow Handle

145178630
10-013: RNCC: 3 | RNVC: 2

14 Jan 2000

5340-14-279-8339
Retaining Strap

142798339
160-78647-21: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-536-9872
Mounting Bracket

145369872
8065-01: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-489-6889
Angle Bracket

144896889
332P87-0027-28: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-553-5756
Retaining Strap

145535756
BBCE-11H6000: RNCC: 3 | RNVC: 2

18 Apr 2007

5340-14-496-7047
Retaining Strap

144967047
99007-16: RNCC: 3 | RNVC: 2
F300 0T 021 9354: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-438-9181
Pipe Hanger

144389181
332A67-1212-60: RNCC: 3 | RNVC: 2

11 Apr 1990

5340-14-370-7760
Angle Bracket

143707760
NO PRIMARY REF14-370-7760: RNCC: 3 | RNVC: 2
IMS1000: RNCC: 5 | RNVC: 9

5 Jun 1981

5340-14-331-7030
Bow Handle

143317030
BAZ1692: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-224-4124
Loop Clamp

142244124
0008031: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-527-6151
Mounting Plate

145276151
COU001552012023: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-14-041-2734
Loop Clamp

140412734
J00547-00-5000P007: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-466-8177
Pipe Hanger

144668177
78732-023-036B: RNCC: 3 | RNVC: 2

1 Dec 1993

5340-14-464-3529
Push Door Plate

144643529
709066-00: RNCC: 3 | RNVC: 2
89297447: RNCC: 5 | RNVC: 2

28 Jul 1993

5340-14-307-1135
Mending Plate

143071135
T02262-68: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-302-8858
Detent Plunger

143028858
NO PRIMARY REF14-302-8858: RNCC: 3 | RNVC: 2
23844DETN: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-464-0942
Mounting Bracket

144640942
366A54-1142-0001: RNCC: 3 | RNVC: 2

15 Jul 1993

5340-14-378-5475
Angle Bracket

143785475
121S76-110-14-0: RNCC: 3 | RNVC: 2
121S76-110-14-0: RNCC: 5 | RNVC: 2

11 Aug 1982

5340-14-358-5941
Bail Handle

143585941
462-10166-000: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-225-8576
Loop Clamp

142258576
3160S41-11-102: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-376-5347
Access Cover

143765347
NO PRIMARY REF14-376-5347: RNCC: 3 | RNVC: 2
404305915: RNCC: 5 | RNVC: 2
404305915: RNCC: 5 | RNVC: 9
404305915: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-439-2415
Loop Clamp

144392415
332A52-1177-00: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-533-7955
Angle Bracket

145337955
168E615-00: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-354-2617
Tubular Fairlead

143542617
650-82355-00: RNCC: 3 | RNVC: 2

30 Jan 1979

5340-14-526-4766
Pipe Hanger

145264766
78733-020-024B: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-268-9896
Handwheel

142689896
MAT137-003F6ACIER: RNCC: 3 | RNVC: 2
553-000MA060F5-5C1: RNCC: 5 | RNVC: 2
GSM137-007F18ACIER: RNCC: 5 | RNVC: 2
GSM137-07F18ACIER: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-464-6245
Handwheel

144646245
4405-18: RNCC: 3 | RNVC: 2

17 Aug 1993

5340-14-043-2183
Handle Grip

140432183
625-06: RNCC: 3 | RNVC: 2

10 Apr 1984

5340-14-381-4265
Mending Plate

143814265
NO PRIMARY REF14-381-4265: RNCC: 3 | RNVC: 2
1619069: RNCC: 5 | RNVC: 9
01619069: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-485-5794
Mounting Bracket

144855794
332A58-1652-15: RNCC: 3 | RNVC: 2

29 Jan 1997

5340-14-411-4813
Retaining Strap

144114813
A02358-04-1000P013: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-207-5558
Strap Hinge

142075558
JEA22-52: RNCC: 3 | RNVC: 2
ETS5-315: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-271-0602
Butt Hinge

142710602
R4A294-60-813: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-377-4533
Handwheel

143774533
2307854: RNCC: 3 | RNVC: 2
2307854: RNCC: 5 | RNVC: 9
53822307854: RNCC: 5 | RNVC: 9
53822307854: RNCC: 5 | RNVC: 9
85-691-5018: RNCC: 6 | RNVC: 9

17 May 1982

5340-14-468-4132
Angle Bracket

144684132
0315550250: RNCC: 3 | RNVC: 2
85-695-2142: RNCC: 6 | RNVC: 9

23 Feb 1994

5340-14-406-0854
Retaining Band

144060854
852536-010: RNCC: 3 | RNVC: 2
852536-010: RNCC: 5 | RNVC: 2
30074073: RNCC: 5 | RNVC: 2
852536-010: RNCC: 5 | RNVC: 9
MAF1500057107: RNCC: 6 | RNVC: 9

8 Jan 1986

5340-14-427-0164
Retaining Strap

144270164
053792-850-921: RNCC: 3 | RNVC: 9
053792850921: RNCC: 3 | RNVC: 9
5003079014: RNCC: 5 | RNVC: 2

5 Oct 1988

5340-14-443-5482
Angle Bracket

144435482
CAP230-20-42-00A: RNCC: 3 | RNVC: 9

28 Nov 1990

5340-14-415-8478
Door Hook

144158478
LN331-074PLANCHE14REP2: RNCC: 3 | RNVC: 2

21 May 1987

5340-14-351-9290
Retaining Strap

143519290
53131-344-690SG: RNCC: 3 | RNVC: 2
53131-344-690SG: RNCC: 5 | RNVC: 2

16 Oct 1978

5340-14-274-5837
Mounting Plate

142745837
285-873: RNCC: 3 | RNVC: 2
285873: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-461-3227
Pipe Hanger

144613227
LN400-012REPA4: RNCC: 3 | RNVC: 2
LN400012F4REPA4: RNCC: 5 | RNVC: 2
RAB2899: RNCC: 5 | RNVC: 2
LN400-012F7REPA4: RNCC: 5 | RNVC: 2

8 Mar 1993

5340-14-554-1696
Mounting Bracket

145541696
CLB511-001-720: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-402-8993
Swivel Caster

144028993
NO PRIMARY REF14-402-8993: RNCC: 3 | RNVC: 2
M4ZS670D1790: RNCC: 5 | RNVC: 2

25 Jul 1985

5340-14-401-7345
Rim Lock Set

144017345
531-00: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-449-2488
Mounting Bracket

144492488
NO PRIMARY REF14-449-2488: RNCC: 3 | RNVC: 2
431333: RNCC: 5 | RNVC: 2

7 Aug 1991

5340-14-470-2987
Loop Clamp

144702987
RT60L-NOIR: RNCC: 3 | RNVC: 2
1064018Y00: RNCC: 5 | RNVC: 2

15 Jun 1994

5340-14-342-4649
Retaining Strap

143424649
3511-130-70091: RNCC: 3 | RNVC: 2
3511 130 70091: RNCC: 5 | RNVC: 2

16 May 1977

5340-14-414-4867
Rim Lock Set

144144867
271-00: RNCC: 3 | RNVC: 2
85-693-4658: RNCC: 6 | RNVC: 9

4 Feb 1987

5340-14-401-7366
Expansion Shield

144017366
64160-5HHDM4-32: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-437-4443
Mounting Bracket

144374443
332A25-1106-20: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-332-4521
Rim Lock Set

143324521
NO PRIMARY REF14-332-4521: RNCC: 3 | RNVC: 2
1700-03-1729B1MN006SANSCLE: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-249-4260
Cover Strip

142494260
M3C232-25-852: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-297-1390
Pipe Hanger

142971390
MY20515-1704: RNCC: 3 | RNVC: 2
MY20-515-17-04: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-437-4521
Mounting Bracket

144374521
332A61-2338-06: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-532-5070
Mounting Bracket

145325070
42-725-017: RNCC: 3 | RNVC: 2
SZ42.725.017: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-14-319-1407
Mounting Plate

143191407
NO PRIMARY REF14-319-1407: RNCC: 3 | RNVC: 2
256132: RNCC: 5 | RNVC: 9
S256132: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-246-9753
Retaining Band

142469753
NO PRIMARY REF14-246-9753: RNCC: 3 | RNVC: 2
LFP54-215: RNCC: 5 | RNVC: 2
LFP54-215: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-458-7494
Butt Hinge

144587494
CLB43-11-800-22: RNCC: 3 | RNVC: 2

3 Nov 1992

5340-14-305-3074
Control Rod

143053074
X00494-25: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-534-5257
Rigid Caster

145345257
518-6NER: RNCC: 3 | RNVC: 9
5180654: RNCC: 5 | RNVC: 9
518-6NER: RNCC: 5 | RNVC: 9
5180654: RNCC: 5 | RNVC: 9

26 Mar 2003

5340-14-512-4081
Rigid Caster

145124081
A09011606: RNCC: 3 | RNVC: 2
73265-GUITEL: RNCC: 5 | RNVC: 2
73265-GUITEL: RNCC: 5 | RNVC: 9
73265GUITEL: RNCC: 5 | RNVC: 9

15 Feb 1999

5340-14-542-1285
Butt Hinge

145421285
5302835-020-01M: RNCC: 3 | RNVC: 2

7 Jul 2004

5340-14-530-7209
Mounting Bracket

145307209
195-510: RNCC: 3 | RNVC: 2
195510: RNCC: 5 | RNVC: 2

3 Jul 2002

5340-14-450-7313
Retaining Band

144507313
P212-218-REP18: RNCC: 3 | RNVC: 9

21 Oct 1991

5340-14-515-7260
Angle Bracket

145157260
RA1M216900420A1: RNCC: 3 | RNVC: 2

28 Jul 1999

5340-14-484-8793
Door Closer

144848793
8375100: RNCC: 3 | RNVC: 2

12 Dec 1996

5340-14-500-5775
Compression Cup

145005775
7812080000: RNCC: 3 | RNVC: 2
F300 0T 024 5959: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-462-6297
Mounting Plate

144626297
MA1089F00: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-14-031-2731
Support Hook

140312731
602174: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-523-0232
Mounting Plate

145230232
47139195: RNCC: 3 | RNVC: 2

18 Dec 2000

5340-14-311-3759
Access Hole Frame

143113759
VTTRATACA188: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-436-5932
Rod End Clevis

144365932
DA2C201766005: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-367-8273
Quick Release Pin

143678273
121S83-553-00-0M1: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-516-0653
Pin Removable Head

145160653
10323891: RNCC: 3 | RNVC: 2
IF-192-2174: RNCC: 5 | RNVC: 9

8 Sep 1999

5340-14-548-1126
Angle Bracket

145481126
RA1A702726021: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-362-3679
Plug Button

143623679
0024158023: RNCC: 3 | RNVC: 2
0024158023: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-445-7321
Loop Clamp

144457321
3-2607-02-32A: RNCC: 3 | RNVC: 2
3-2607-02-32A: RNCC: 5 | RNVC: 2

25 Feb 1991

5340-14-534-9200
Utility Access Door

145349200
1SH41764649: RNCC: 3 | RNVC: 2
8034231F00: RNCC: 5 | RNVC: 2

16 Apr 2003

5340-14-495-8223
Strap Fastener Loop

144958223
NO PRIMARY REF14-495-8223: RNCC: 3 | RNVC: 2
11323-017: RNCC: 5 | RNVC: 9
F300 0T 020 1615: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-526-9402
Mounting Bracket

145269402
21230828-00: RNCC: 3 | RNVC: 2
21230828-9: RNCC: 5 | RNVC: 2

19 Sep 2001

5340-14-549-1892
Access Cover

145491892
212671: RNCC: 3 | RNVC: 2

7 Mar 2006

5340-14-432-1285
Mounting Plate

144321285
853-600-140-0: RNCC: 3 | RNVC: 2

24 May 1989

5340-14-333-7826
Retaining Strap

143337826
M208-51023: RNCC: 3 | RNVC: 2

23 Apr 1976

5340-14-323-9942
Access Cover

143239942
106-29-17: RNCC: 3 | RNVC: 2
106-29-17: RNCC: 5 | RNVC: 2
85-800-3658: RNCC: 6 | RNVC: 9

1 Jan 1975

5340-14-517-5559
Butt Hinge

145175559
38963PA05-1830: RNCC: 3 | RNVC: 2
38963PA05: RNCC: 5 | RNVC: 2

5 Jan 2000

5340-14-528-4159
Mounting Plate

145284159
99005-17: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-14-432-7705
Butt Hinge

144327705
262-29-84054-01: RNCC: 3 | RNVC: 2
85-693-6163: RNCC: 6 | RNVC: 9

26 Jun 1989

5340-14-031-3365
Bumper

140313365
MS1326-105: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-443-5442
Protection Bellows

144435442
CAP230-50-67-00: RNCC: 3 | RNVC: 9
CAP230-50-67-00: RNCC: 5 | RNVC: 9

28 Nov 1990

5340-14-290-2843
Pipe Hanger

142902843
330A75-1916-00: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-317-5243
Retaining Strap

143175243
NO PRIMARY REF14-317-5243: RNCC: 3 | RNVC: 2
707344: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-451-7128
Retaining Strap

144517128
24055048100: RNCC: 3 | RNVC: 2
43232695: RNCC: 5 | RNVC: 2
445741-00: RNCC: 5 | RNVC: 2

2 Dec 1991

5340-14-424-6677
Rigid Caster

144246677
HF5BA200-73R: RNCC: 3 | RNVC: 2
91619045: RNCC: 5 | RNVC: 2

2 Jun 1988

5340-14-374-7986
Rod End Clevis

143747986
AA38-1-11: RNCC: 3 | RNVC: 2
AA38-1-11: RNCC: 5 | RNVC: 2
AA38-1-11: RNCC: 5 | RNVC: 2

30 Jan 1982

5340-14-334-8662
Retaining Band

143348662
382-5-2-13: RNCC: 3 | RNVC: 2
85-688-5478: RNCC: 6 | RNVC: 9

2 Jun 1976

5340-14-401-3349
Mending Plate

144013349
NO PRIMARY REF14-401-3349: RNCC: 3 | RNVC: 2
20033651: RNCC: 5 | RNVC: 9

5 Jun 1985

5340-14-367-5938
Anchor Strap

143675938
0411-11006: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-460-6126
Support Hook

144606126
637799-01: RNCC: 3 | RNVC: 2

4 Feb 1993

5340-14-353-1944
Access Cover

143531944
16612579: RNCC: 3 | RNVC: 2
16612579: RNCC: 3 | RNVC: 9

8 Dec 1978

5340-14-425-6299
Compression Cup

144256299
6D40-1171C: RNCC: 3 | RNVC: 2

14 Jul 1988

5340-14-435-2402
Magnetic Catch

144352402
C16-1W: RNCC: 3 | RNVC: 2
30331602N: RNCC: 5 | RNVC: 2
F300 0T 005 9259: RNCC: 6 | RNVC: 9

31 Oct 1989

5340-14-466-1814
Rod End Clevis

144661814
162735: RNCC: 3 | RNVC: 2
89169954: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-495-0871
Utility Access Door

144950871
F00146048: RNCC: 3 | RNVC: 2
F00146048: RNCC: 5 | RNVC: 9
F300 0T 018 3318: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-529-1668
Utility Access Door

145291668
10530019: RNCC: 3 | RNVC: 2

13 Mar 2002

5340-14-503-0332
Plug Button

145030332
5000541533: RNCC: 3 | RNVC: 2

22 Dec 1997

5340-14-337-6432
Access Cover

143376432
107314P107317: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-245-9545
Bumper

142459545
E4M211-40-04: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-536-7334
Block Clamp

145367334
GC52297Y00: RNCC: 3 | RNVC: 2

15 Sep 2003

5340-14-383-5103
Access Cover

143835103
20068336: RNCC: 3 | RNVC: 2
20068336: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-540-3112
Access Cover

145403112
10670675000: RNCC: 3 | RNVC: 2

18 Mar 2004

5340-14-358-3279
Anchor Strap

143583279
5000497043: RNCC: 3 | RNVC: 2
5000497043: RNCC: 5 | RNVC: 9

13 Aug 1979

5340-14-497-5786
Access Cover

144975786
234784: RNCC: 3 | RNVC: 2
F300 0T 023 3811: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-389-8312
Angle Bracket

143898312
837046/003: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-531-8949
Rod End Clevis

145318949
0RX23535: RNCC: 3 | RNVC: 2

25 Sep 2002

5340-14-531-3191
Access Cover

145313191
47087968: RNCC: 3 | RNVC: 2

6 Aug 2002

5340-14-212-0227
Loop Clamp

142120227
13942954-7: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-530-1146
Access Cover

145301146
0391400122: RNCC: 3 | RNVC: 2
0391400122: RNCC: 3 | RNVC: 2

14 May 2002

5340-14-419-8170
Rod End Clevis

144198170
DA2C121317835: RNCC: 3 | RNVC: 2

5 Nov 1987

5340-14-505-0865
Access Cover

145050865
01231810: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-534-7528
Access Cover

145347528
47081219: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-476-1466
Plug Button

144761466
NIM210329: RNCC: 3 | RNVC: 2
5365AA8021888: RNCC: 6 | RNVC: 9

24 May 1995

5340-14-373-3251
Anchor Strap

143733251
4269-14: RNCC: 3 | RNVC: 2

21 Oct 1981

5340-14-442-0601
Access Cover

144420601
T245B500-000A: RNCC: 3 | RNVC: 2
1008555W00: RNCC: 5 | RNVC: 2

26 Sep 1990

5340-14-042-0027
Synchro Clamp

140420027
121S81-306-00-0M1: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-401-3392
Anchor Strap

144013392
2016-60-02: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-320-4463
Access Cover

143204463
26250921: RNCC: 3 | RNVC: 2
26250921: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-521-3592
Access Cover

145213592
BB016809Y00: RNCC: 3 | RNVC: 2

20 Jul 2000

5340-14-385-4580
Rod End Clevis

143854580
241751: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-487-5784
Flush Catch Claw

144875784
385352: RNCC: 3 | RNVC: 2
385352-002: RNCC: 5 | RNVC: 9

10 Apr 1997

5340-14-484-8172
Mounting Bracket

144848172
332P65-1115-00: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-331-7169
Pipe Hanger

143317169
121E71-270-27-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-305-2707
Access Cover

143052707
23030560: RNCC: 3 | RNVC: 2
23030560-6: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-374-5043
Angle Bracket

143745043
341A65-5108-00: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-461-3642
Support Hook

144613642
1X56-136-564: RNCC: 3 | RNVC: 2

9 Mar 1993

5340-14-485-9142
Mounting Bracket

144859142
332A61-4572-00: RNCC: 3 | RNVC: 2

19 Feb 1997

5340-14-340-3338
Pipe Hanger

143403338
M3C704-310: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-536-8742
Runner

145368742
97309-113147007: RNCC: 3 | RNVC: 2
97309-113147007: RNCC: 5 | RNVC: 9

17 Sep 2003

5340-14-459-6797
Retaining Band

144596797
A10126-02-3000P008: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-549-6176
Rim Latch Set

145496176
ST1-601-208-02: RNCC: 3 | RNVC: 2

24 Apr 2006

5340-14-293-2634
Snap Hook

142932634
NT06-05JUIN64/0173: RNCC: 2 | RNVC: 2

1 Jan 1973

5340-14-374-9731
Rod End Connector

143749731
286926: RNCC: 3 | RNVC: 2
85-691-6399: RNCC: 6 | RNVC: 9

30 Jan 1982

5340-14-358-5916
Quick Release Pin

143585916
5001BTV1020825: RNCC: 3 | RNVC: 2
5001BTV10-20-825: RNCC: 5 | RNVC: 2

7 Sep 1979

5340-14-542-1363
Eye Hook

145421363
AC-116-IB: RNCC: 3 | RNVC: 2
AC116IB: RNCC: 5 | RNVC: 2

8 Jul 2004

5340-14-539-7384
Access Cover

145397384
21023613-00: RNCC: 3 | RNVC: 2
21023613-8: RNCC: 5 | RNVC: 2

5 Feb 2004

5340-14-350-5410
Butt Hinge

143505410
MS7524-4-7200: RNCC: 3 | RNVC: 2
MS7524-4: RNCC: 5 | RNVC: 2
MS7524-4-1830: RNCC: 5 | RNVC: 2
MS7424-4: RNCC: 5 | RNVC: 9
MS7524-4: RNCC: 5 | RNVC: 9
MS7524-4-1830: RNCC: 5 | RNVC: 9
MS7524-4-1830: RNCC: 5 | RNVC: 9

12 Jul 1978

5340-14-528-6790
Bridge Clamp

145286790
CRP401-110-410: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-14-010-0139
Cover Strip

140100139
3130S28-02-008: RNCC: 3 | RNVC: 2

1 Jan 1961

5340-14-474-2854
Bridge Clamp

144742854
SES513-ET: RNCC: 3 | RNVC: 2

8 Feb 1995

5340-14-369-2827
Synchro Clamp

143692827
S2259-1DG: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-311-6469
Butt Hinge

143116469
262-29-84081-42: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-534-1358
Mounting Bracket

145341358
332P87-2022-37: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-501-7039
Loop Clamp

145017039
120012-10: RNCC: 3 | RNVC: 2
91318813: RNCC: 3 | RNVC: 2

5 Nov 1997

5340-14-450-7733
Loop Clamp

144507733
4611-200-100: RNCC: 3 | RNVC: 9

23 Oct 1991

5340-14-201-9206
Retaining Strap

142019206
574-314-140-0: RNCC: 3 | RNVC: 2
9371-14140: RNCC: 3 | RNVC: 2

1 Jan 1962

5340-14-450-4590
Rod End Clevis

144504590
21320114: RNCC: 3 | RNVC: 2
21320114-0: RNCC: 5 | RNVC: 2

9 Oct 1991

5340-14-413-1502
Angle Bracket

144131502
23115517-0: RNCC: 3 | RNVC: 2
23115517: RNCC: 5 | RNVC: 2

26 Nov 1986

5340-14-491-0856
Lock Bolt

144910856
NO PRIMARY REF14-491-0856: RNCC: 3 | RNVC: 2
1280164: RNCC: 5 | RNVC: 9
1280-164: RNCC: 5 | RNVC: 9
F300 0T 001 3824: RNCC: 6 | RNVC: 9
F300 0T 017 8357: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-374-5831
Access Cover

143745831
55284204: RNCC: 3 | RNVC: 2
0116861: RNCC: 5 | RNVC: 2
116861: RNCC: 5 | RNVC: 2
4-85-116861: RNCC: 5 | RNVC: 2
3104561-0: RNCC: 5 | RNVC: 2

30 Jan 1982

5340-14-504-9315
Mounting Plate

145049315
PAN-Q94073A0V: RNCC: 3 | RNVC: 2
PAN-Q94073X0V: RNCC: 5 | RNVC: 9

11 Mar 1998

5340-14-276-2511
Loop Clamp

142762511
160-10421: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-236-2682
Bumper

142362682
NO PRIMARY REF14-236-2682: RNCC: 3 | RNVC: 2
1934023: RNCC: 5 | RNVC: 9
735-22R0UGE: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-298-1064
Mending Plate

142981064
063A01-112B00-0500: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-265-6553
Webbing Strap

142656553
V2N00543: RNCC: 3 | RNVC: 2
K0139A: RNCC: 5 | RNVC: 2
KO-139A: RNCC: 6 | RNVC: 9

1 Jan 1970

5340-14-550-5301
Loop Clamp

145505301
RS1-6/12-W1: RNCC: 3 | RNVC: 2
MX3058A00: RNCC: 5 | RNVC: 2

22 Jun 2006

5340-14-272-2876
Bail Handle

142722876
262-12-28063-01: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-304-7989
Access Cover

143047989
APH149544: RNCC: 3 | RNVC: 2
689-149-544-0: RNCC: 5 | RNVC: 9
6891495440: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-470-7149
Mounting Bracket

144707149
365A68-8081-01: RNCC: 3 | RNVC: 2

29 Jun 1994

5340-14-465-2802
Mounting Plate

144652802
365A61-5410-49: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-459-6662
Arched Cushion

144596662
MAT169-0012F19DE23: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-324-2581
Angle Bracket

143242581
330A58-1265-20: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-395-3115
Buckle

143953115
7330-25: RNCC: 3 | RNVC: 9

2 Oct 1984

5340-14-473-6127
Access Cover

144736127
452-M3546-000: RNCC: 3 | RNVC: 2
452M3546-000: RNCC: 5 | RNVC: 2

4 Jan 1995

5340-14-276-2504
Rod End Clevis

142762504
160-10319-29: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-382-4543
Access Cover

143824543
435-65001-306: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-336-4157
Retaining Band

143364157
341A41-1010-01: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-362-6868
Retaining Clip

143626868
9970-147-159: RNCC: 3 | RNVC: 2

19 Mar 1980

5340-14-549-6352
Mounting Plate

145496352
JCB 10 135-872: RNCC: 3 | RNVC: 2

24 Apr 2006

5340-14-516-0011
Rod End Clevis

145160011
309-142-401-0: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-14-534-6558
Mounting Bracket

145346558
FA7Y4/3 RM 450 183 H01: RNCC: 3 | RNVC: 2
3 RM 450 183 H01: RNCC: 5 | RNVC: 2

1 Apr 2003

5340-14-541-9514
Mounting Plate

145419514
56774145-392: RNCC: 3 | RNVC: 2
502106011031A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-464-5987
Bumper

144645987
150200.10: RNCC: 3 | RNVC: 9
10-15020-0: RNCC: 5 | RNVC: 9
10-150200: RNCC: 5 | RNVC: 9
1502: RNCC: 5 | RNVC: 9

11 Aug 1993

5340-14-526-4752
Angle Bracket

145264752
78704-50-050C: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-264-6274
Loop Clamp

142646274
9015BC43-08: RNCC: 3 | RNVC: 2
9015BC43-08: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-520-1433
Utility Access Door

145201433
52760: RNCC: 3 | RNVC: 2
SDM52760: RNCC: 5 | RNVC: 9

16 May 2000

5340-14-375-7774
Corner Brace

143757774
341A65-5067-21: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-470-0627
Bridge Clamp

144700627
LN214001WR90TYPE"E": RNCC: 3 | RNVC: 2
RAB3287: RNCC: 5 | RNVC: 2

27 May 1994

5340-14-363-9045
Clamping Catch

143639045
M376-228102: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-437-4688
Rod End Clevis

144374688
332A91-3012-00: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-456-5978
Mending Plate

144565978
JVBT102005-03: RNCC: 3 | RNVC: 2
5045577: RNCC: 5 | RNVC: 9

9 Jul 1992

5340-14-369-1686
Webbing Strap

143691686
365A91-2350-12: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-545-4213
Doorstop

145454213
A10-74-061-01-0R1: RNCC: 3 | RNVC: 2
A10-74-061-01-0R1: RNCC: 5 | RNVC: 2

12 Apr 2005

5340-14-461-6187
Bumper

144616187
1844-17: RNCC: 3 | RNVC: 2
9153541280: RNCC: 5 | RNVC: 2
91535412: RNCC: 5 | RNVC: 2

17 Mar 1993

5340-14-499-2107
Mounting Plate

144992107
999999-048: RNCC: 3 | RNVC: 2
103043X03020A: RNCC: 3 | RNVC: 9
F300 0T 019 7795: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-464-9412
Loop Clamp

144649412
9970-146-598: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-437-4713
Mounting Bracket

144374713
332A91-3202-10: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-465-1678
Angle Bracket

144651678
365A61-8318-20: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-421-2801
Filler Opening Cap

144212801
NO PRIMARY REF14-421-2801: RNCC: 3 | RNVC: 2
AC140CM8: RNCC: 5 | RNVC: 9

14 Jan 1988

5340-14-424-7603
Expansion Plug

144247603
2004-02: RNCC: 3 | RNVC: 2
E78400113: RNCC: 5 | RNVC: 2
6233141: RNCC: 5 | RNVC: 2
2004-002: RNCC: 5 | RNVC: 9

8 Jun 1988

5340-14-375-9761
Leaf Spring

143759761
NO PRIMARY REF14-375-9761: RNCC: 3 | RNVC: 2
464109888: RNCC: 5 | RNVC: 2
464109888: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-534-1384
Webbing Strap

145341384
332V82-0019-14: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-370-7954
Handle Grip

143707954
689-42177-00: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-347-8546
Mounting Plate

143478546
41-14205PL1REPA: RNCC: 3 | RNVC: 2
41-14205PL1REPA: RNCC: 5 | RNVC: 9

1 Mar 1978

5340-14-395-3121
Bumper

143953121
N410-317TAMP0N: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-355-8643
Mending Plate

143558643
C200-1-90: RNCC: 3 | RNVC: 2

5 Apr 1979

5340-14-348-4662
Loop Clamp

143484662
9418311025: RNCC: 3 | RNVC: 2
RSGU1100-25-15: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-286-4786
Mending Plate

142864786
341A25-1000-36: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-441-0505
Bumper

144410505
090200008007018: RNCC: 3 | RNVC: 2
09020-00-08-00-7018: RNCC: 5 | RNVC: 2
9020-00-08-00: RNCC: 5 | RNVC: 2
09020-00-08-00-7018: RNCC: 5 | RNVC: 9
090200008007018: RNCC: 5 | RNVC: 9
9020-00-08-00: RNCC: 5 | RNVC: 9

16 Aug 1990

5340-14-419-5425
Locking Stay

144195425
M208-61030: RNCC: 3 | RNVC: 2

21 Oct 1987

5340-14-363-0238
Friction Catch

143630238
LA1202: RNCC: 3 | RNVC: 2
10071-150: RNCC: 5 | RNVC: 2
12071-002: RNCC: 5 | RNVC: 9

3 Apr 1980

5340-14-405-3298
Rod End Clevis

144053298
5204-57-036: RNCC: 3 | RNVC: 2
5204-57-036: RNCC: 5 | RNVC: 9

27 Nov 1985

5340-14-214-0644
Clamping Catch

142140644
7015: RNCC: 3 | RNVC: 2
10553: RNCC: 3 | RNVC: 2
70-15: RNCC: 5 | RNVC: 2
7015 SANS CROCHET: RNCC: 5 | RNVC: 2
44002558-00: RNCC: 5 | RNVC: 2
44002558-00: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-509-7815
Loop Clamp

145097815
MY20522-9101: RNCC: 3 | RNVC: 2

4 Nov 1998

5340-14-512-5474
Section Block Clamp

145125474
F704-76-01: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-305-3073
Control Rod

143053073
C00494-29: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-537-1600
Mounting Plate

145371600
MAT214-1469F4: RNCC: 3 | RNVC: 2

6 Oct 2003

5340-14-553-0528
Runner

145530528
CCN301-133-410A1: RNCC: 3 | RNVC: 2

27 Feb 2007

5340-14-353-2132
Rim Latch Set

143532132
77220-340-011: RNCC: 3 | RNVC: 2
77220-340-011: RNCC: 5 | RNVC: 2

8 Dec 1978

5340-14-446-2812
Mounting Plate

144462812
41-39611: RNCC: 3 | RNVC: 2
41-39611: RNCC: 5 | RNVC: 9

12 Mar 1991

5340-14-375-9850
Angle Bracket

143759850
21-098-400: RNCC: 3 | RNVC: 2
21-098-400: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-341-2000
Loop Clamp

143412000
M3E707-87: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-473-2397
Flush Catch Claw

144732397
3210-23046-517: RNCC: 3 | RNVC: 2

7 Dec 1994

5340-14-395-9143
Mending Plate

143959143
0013-0032: RNCC: 3 | RNVC: 2
SAF0013-0032: RNCC: 5 | RNVC: 9

23 Nov 1984

5340-14-222-7946
Webbing Strap

142227946
LFP54-427: RNCC: 3 | RNVC: 2
LFP54-427: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-461-2207
Pipe Hanger

144612207
054488-853-921: RNCC: 3 | RNVC: 9
7703079403: RNCC: 5 | RNVC: 2
054488-853921: RNCC: 5 | RNVC: 9
054488853921: RNCC: 5 | RNVC: 9

3 Mar 1993

5340-14-439-7154
Turnbuckle Body

144397154
052-201-04-02: RNCC: 3 | RNVC: 2
052-201-04-02: RNCC: 5 | RNVC: 2
052-201-04-02: RNCC: 5 | RNVC: 2

16 May 1990

5340-14-375-2763
Retaining Strap

143752763
0035665076: RNCC: 3 | RNVC: 2
35665-076: RNCC: 5 | RNVC: 9
0035665076: RNCC: 5 | RNVC: 9

26 Feb 1982

5340-14-447-3256
Mounting Bracket

144473256
IC229-12: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-287-9235
Angle Bracket

142879235
341A25-1080-53: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-555-4101
Loop Clamp

145554101
78651DH6-5AS: RNCC: 1 | RNVC: 2
78651DH6-5AS: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-14-512-5462
Section Block Clamp

145125462
F521-77-01: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-508-7748
Lock Bolt

145087748
BS2318.07.04.000: RNCC: 3 | RNVC: 2
BS2318-07-04-000: RNCC: 5 | RNVC: 9

30 Sep 1998

5340-14-445-1639
Retaining Strap

144451639
ST159-2M112-3P22A: RNCC: 3 | RNVC: 2
ST159-2M112-3P22: RNCC: 5 | RNVC: 2

4 Feb 1991

5340-14-314-2408
Rod End Clevis

143142408
9742-106: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-529-4177
Pipe Hanger

145294177
EA1M705-28-01: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-287-9203
Mending Plate

142879203
341A31-4180-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-343-2825
Retaining Strap

143432825
3511 314 32861: RNCC: 3 | RNVC: 2
3511-314-32861: RNCC: 5 | RNVC: 9

11 Oct 1995

5340-14-401-3417
Angle Bracket

144013417
2016-63-02: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-489-6546
Angle Bracket

144896546
332A23-7007-20: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-533-8751
Metal Grille

145338751
12-325-034: RNCC: 3 | RNVC: 2
SZ12.325.034: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-457-5869
Pipe Hanger

144575869
PM1A724114100: RNCC: 3 | RNVC: 2
PM1A724114100: RNCC: 5 | RNVC: 2
85-694-2816: RNCC: 6 | RNVC: 9

10 Sep 1992

5340-14-373-7323
Plug Button

143737323
403-700-120-0: RNCC: 3 | RNVC: 2

13 Nov 1981

5340-14-453-7531
Mounting Plate

144537531
2085-05-019: RNCC: 3 | RNVC: 2
89411702: RNCC: 5 | RNVC: 9

5 Mar 1992

5340-14-541-9963
Mounting Plate

145419963
20036-146: RNCC: 3 | RNVC: 2
502106034025A: RNCC: 3 | RNVC: 9
2 0036-146: RNCC: 5 | RNVC: 2

2 Jul 2004

5340-14-412-3601
Retaining Strap

144123601
F8E010055013020: RNCC: 3 | RNVC: 2
85-801-2271: RNCC: 6 | RNVC: 9

13 Oct 1986

5340-14-529-6963
Mounting Bracket

145296963
457-12492-000: RNCC: 3 | RNVC: 2

4 Apr 2002

5340-14-370-2502
Arched Cushion

143702502
650-403-024-0: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-453-7683
Friction Catch

144537683
SSNGA9S517F18B/20B-TYPEA: RNCC: 3 | RNVC: 2
47704A2501078A00AREPA: RNCC: 5 | RNVC: 2

5 Mar 1992

5340-14-389-0388
Permanent Magnet

143890388
501-333-020-0: RNCC: 3 | RNVC: 2
213188: RNCC: 5 | RNVC: 9

29 Nov 1983

5340-14-552-9397
Access Cover

145529397
T3-4022-A-01-30-005: RNCC: 3 | RNVC: 2

14 Feb 2007

5340-14-251-8430
Retaining Strap

142518430
47125: RNCC: 3 | RNVC: 2
031530: RNCC: 3 | RNVC: 2
932120GRIS: RNCC: 3 | RNVC: 2
417125: RNCC: 5 | RNVC: 2
315-30: RNCC: 5 | RNVC: 2
31530: RNCC: 5 | RNVC: 2
3245060315306: RNCC: 5 | RNVC: 2
206-8580-9: RNCC: 5 | RNVC: 9
5322684: RNCC: 5 | RNVC: 9
LG31530: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-477-7005
Mounting Plate

144777005
54402-190-1: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-14-460-6159
Loop Clamp

144606159
620-867-739-0: RNCC: 3 | RNVC: 2

4 Feb 1993

5340-14-421-7422
Pipe Hanger

144217422
045U01-672403Q: RNCC: 3 | RNVC: 2
0672403Q00: RNCC: 5 | RNVC: 2
89405352: RNCC: 5 | RNVC: 2

27 Jan 1988

5340-14-420-0355
Webbing Strap

144200355
4-012-0048: RNCC: 3 | RNVC: 2

18 Nov 1987

5340-14-440-2595
Surface Bolt

144402595
V2-86: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-287-5930
Rod End Clevis

142875930
A10-74-432-15-0: RNCC: 3 | RNVC: 2
A10-74-432-15-0: RNCC: 3 | RNVC: 2
A10-74-432-15-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-365-3206
Arched Cushion

143653206
650-403-022-0: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-503-2340
Bumper

145032340
456500: RNCC: 3 | RNVC: 2
456500-001: RNCC: 5 | RNVC: 9

7 Jan 1998

5340-14-501-9649
Blank Panel

145019649
A10-74-818-12-0: RNCC: 3 | RNVC: 2
A10-74-818-12-0: RNCC: 5 | RNVC: 2

19 Nov 1997

5340-14-543-8598
Butt Hinge

145438598
42-1-3859: RNCC: 3 | RNVC: 2

14 Dec 2004

5340-14-399-3549
Loop Clamp

143993549
R4A715-66: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-542-0486
Loop Clamp

145420486
21664127-114: RNCC: 3 | RNVC: 2
502106034040A: RNCC: 3 | RNVC: 9
2166 4127-114: RNCC: 5 | RNVC: 2

2 Jul 2004

5340-14-505-0591
Runner

145050591
NO PRIMARY REF14-505-0591: RNCC: 3 | RNVC: 2
5010277348: RNCC: 5 | RNVC: 2
12012078301: RNCC: 5 | RNVC: 9

11 Mar 1998

5340-14-445-0082
Mounting Bracket

144450082
NO PRIMARY REF14-445-0082: RNCC: 3 | RNVC: 2
RT19390: RNCC: 5 | RNVC: 9

31 Jan 1991

5340-14-413-1766
Retaining Clip

144131766
1502-00: RNCC: 3 | RNVC: 2
1502: RNCC: 5 | RNVC: 2

26 Nov 1986

5340-14-534-4638
Webbing Strap

145344638
682-44-45-8M: RNCC: 3 | RNVC: 2
DV092255: RNCC: 6 | RNVC: 9

26 Mar 2003

5340-14-031-3363
Swivel Caster

140313363
MS1377-40-423: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-450-5821
Strap Hinge

144505821
A10111-02-1080: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-14-205-9879
Retaining Strap

142059879
2228-53-26-00-26: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-480-0408
Section Block Clamp

144800408
204224003: RNCC: 3 | RNVC: 2
PAA42-24-003: RNCC: 5 | RNVC: 2

21 Feb 1996

5340-14-438-7031
Bumper

144387031
MGA1143: RNCC: 3 | RNVC: 2
85-693-4642: RNCC: 6 | RNVC: 9

30 Mar 1990

5340-14-386-9907
Retaining Strap

143869907
NO PRIMARY REF14-386-9907: RNCC: 3 | RNVC: 2
EHCB8: RNCC: 5 | RNVC: 9

24 Aug 1983

5340-14-398-6442
Webbing Strap

143986442
BY60-2MEQUIPEE2D1: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-531-2285
Mounting Bracket

145312285
341A69-6508-22: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-549-6147
Mounting Bracket

145496147
CC201-627001-00: RNCC: 3 | RNVC: 2

21 Apr 2006

5340-14-212-1253
Plug Button

142121253
BN320-563F11-7P0UCESAG4: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-365-0829
Bumper

143650829
M9637-250KG: RNCC: 3 | RNVC: 9

2 Sep 1980

5340-14-510-3682
Eye Hook

145103682
067W00-640507X: RNCC: 3 | RNVC: 2
5340AA8022305: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-453-9979
Control Rod

144539979
TB30-47075-101: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-445-0102
Mounting Bracket

144450102
853-290-151-0: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-14-391-9114
Plug Button

143919114
5101-02-00-15: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-410-7522
Retaining Band

144107522
A02358-04-1000P012: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-457-5261
Runner

144575261
P3C006512-00: RNCC: 3 | RNVC: 9
313858: RNCC: 5 | RNVC: 2
5044876: RNCC: 5 | RNVC: 9

10 Sep 1992

5340-14-520-9187
Loop Clamp

145209187
A0021-11N53: RNCC: 1 | RNVC: 2
110005300: RNCC: 3 | RNVC: 2
11N53: RNCC: 5 | RNVC: 2
51300005053: RNCC: 5 | RNVC: 9

21 Jun 2000

5340-14-554-6281
Snap Hook

145546281
COMOUS 30: RNCC: 3 | RNVC: 2
EL115-63: RNCC: 5 | RNVC: 2

26 Jul 2007

5340-14-443-4947
Mounting Plate

144434947
71274: RNCC: 3 | RNVC: 9
709-2590-01-2: RNCC: 5 | RNVC: 9

27 Nov 1990

5340-14-394-7216
Rim Lock Set

143947216
NO PRIMARY REF14-394-7216: RNCC: 3 | RNVC: 2
6600-04FE001: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-486-2492
Mounting Plate

144862492
282-1-F-102: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-486-5446
Mounting Bracket

144865446
620-375-029-0: RNCC: 3 | RNVC: 2

21 Mar 1997

5340-14-320-8503
Pipe Hanger

143208503
M3E708-63: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-536-3846
Loop Clamp

145363846
NSA5536-08: RNCC: 1 | RNVC: 2
HP8N: RNCC: 3 | RNVC: 2
NSA5536-08: RNCC: 5 | RNVC: 2

29 Jul 2003

5340-14-292-5554
Angle Bracket

142925554
121E26-800-49-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-378-0257
Swivel Caster

143780257
3614-1-23: RNCC: 3 | RNVC: 2

20 Jul 1982

5340-14-514-5388
Mounting Plate

145145388
047-32-108: RNCC: 3 | RNVC: 2
047-32-108: RNCC: 5 | RNVC: 2

26 May 1999

5340-14-541-5769
Rim Latch

145415769
C5-11-25: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-465-1785
Angle Bracket

144651785
365P61-6145-00: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-452-1504
Corner Brace

144521504
60290-02-06-07: RNCC: 3 | RNVC: 2

18 Dec 1991

5340-14-339-4889
Loop Clamp

143394889
M3E701-500: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-207-0943
Retaining Strap

142070943
790015032: RNCC: 3 | RNVC: 2
ELE5-705-30: RNCC: 5 | RNVC: 9
20229-30MM: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-405-2801
Access Cover

144052801
P3C005568-00: RNCC: 3 | RNVC: 9
313572: RNCC: 5 | RNVC: 2

27 Nov 1985

5340-14-277-4672
Angle Bracket

142774672
262-10-61222-01: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-473-8385
Mounting Bracket

144738385
332A62-3422-20: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-485-6925
Loop Clamp

144856925
650-402-614-0: RNCC: 3 | RNVC: 2

6 Feb 1997

5340-14-385-4550
Retaining Strap

143854550
319A75-10-023: RNCC: 3 | RNVC: 2
319A-75-10.023: RNCC: 5 | RNVC: 2

26 Jul 1983

5340-14-367-2110
Access Cover

143672110
21-37-14-2: RNCC: 3 | RNVC: 2
21-37-14-2: RNCC: 5 | RNVC: 2

11 Dec 1980

5340-14-459-7659
Mounting Plate

144597659
461-10131-000: RNCC: 3 | RNVC: 2

17 Dec 1992

5340-14-268-9945
Handwheel

142689945
000MA1055F7REP1: RNCC: 3 | RNVC: 2
000MA0060F16-1C1: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-423-9368
Retaining Strap

144239368
11506-161-001: RNCC: 3 | RNVC: 2

5 May 1988

5340-14-304-4117
Mending Plate

143044117
330A24-2121-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-544-3533
Bolt And Spacer Kit

145443533
251772780-00: RNCC: 3 | RNVC: 2

24 Jan 2005

5340-14-516-8762
Mounting Bracket

145168762
353-0372-4000: RNCC: 3 | RNVC: 9

20 Oct 1999

5340-14-375-1709
Cover Strip

143751709
330A25-2201-13: RNCC: 3 | RNVC: 2

30 Jan 1982

5340-14-487-6120
Detent Plunger

144876120
355A57-2199-21: RNCC: 3 | RNVC: 2

14 Apr 1997

5340-14-322-6184
Quick Release Pin

143226184
BLS5TA20S: RNCC: 3 | RNVC: 2
BLS5TA20S: RNCC: 5 | RNVC: 2
BLS5TA20S: RNCC: 5 | RNVC: 2
00-258-0392: RNCC: 6 | RNVC: 9

1 Jan 1975

5340-14-449-0997
Detent Plunger

144490997
A03037-10-2080P007: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-14-302-1493
Mending Plate

143021493
A10-22-800-09-0: RNCC: 3 | RNVC: 2
A10-22-800-09-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-332-9030
Angle Bracket

143329030
23005107: RNCC: 3 | RNVC: 2
EA31-1520: RNCC: 5 | RNVC: 2
23005107-1: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-306-0703
Rod End Clevis

143060703
A10-90-141-76-0: RNCC: 3 | RNVC: 2
A10-90-141-76-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-250-8527
Rod End Clevis

142508527
D2140-5-114: RNCC: 3 | RNVC: 2
D2140-5-114: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-441-1892
Metal Grille

144411892
A2000-1-09: RNCC: 3 | RNVC: 2
91639466: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-14-300-0799
Loop Clamp

143000799
01200002010: RNCC: 3 | RNVC: 2
120002: RNCC: 5 | RNVC: 2
120002-10: RNCC: 5 | RNVC: 2
3597470003411: RNCC: 5 | RNVC: 2
CN5: RNCC: 5 | RNVC: 2
91307221: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-396-4145
Snap Hook

143964145
4030-25-202: RNCC: 3 | RNVC: 2
4030-25-22: RNCC: 5 | RNVC: 2
4030-25ST22: RNCC: 5 | RNVC: 2

27 Nov 1984

5340-14-353-8983
Control Rod

143538983
055-008-007: RNCC: 3 | RNVC: 2
D39952: RNCC: 5 | RNVC: 2

16 Jan 1979

5340-14-534-1310
Mounting Plate

145341310
332P68-1680-21: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-411-5210
Bail Handle

144115210
NO PRIMARY REF14-411-5210: RNCC: 3 | RNVC: 2
B276AAC32: RNCC: 5 | RNVC: 9

20 Aug 1986

5340-14-246-3771
Mending Plate

142463771
NO PRIMARY REF14-246-3771: RNCC: 3 | RNVC: 2
S258520: RNCC: 5 | RNVC: 9
258520: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-353-1131
Loop Clamp

143531131
RC55-1BIS: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-505-2009
Access Cover

145052009
5801392-10431: RNCC: 3 | RNVC: 2

13 Mar 1998

5340-14-245-1445
Lock Bolt

142451445
321A23-9607-01: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-429-3836
Control Rod

144293836
NO PRIMARY REF14-429-3836: RNCC: 3 | RNVC: 2
2-8D4-2-50: RNCC: 5 | RNVC: 9

20 Jan 1989

5340-14-472-8674
Mounting Bracket

144728674
332A21-3266-20: RNCC: 3 | RNVC: 2

16 Nov 1994

Load More Results