What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 52 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 52 of 446

5340-14-518-7984
Synchro Clamp

145187984
46510630: RNCC: 3 | RNVC: 9

18 Feb 2000

5340-14-521-4932
Access Cover

145214932
F00200922: RNCC: 3 | RNVC: 2
F00200922: RNCC: 5 | RNVC: 9

2 Aug 2000

5340-14-382-4954
Access Cover

143824954
16766254: RNCC: 3 | RNVC: 2
16766254: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-523-7159
Access Cover

145237159
S9443839: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-253-3350
Access Cover

142533350
24014010400: RNCC: 3 | RNVC: 2
14J104: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-332-5656
Access Cover

143325656
79059072: RNCC: 3 | RNVC: 2
79059072: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-463-4850
Mounting Plate

144634850
304366B: RNCC: 3 | RNVC: 2
400816REP1: RNCC: 5 | RNVC: 2

17 Jun 1993

5340-14-536-1019
Rod End Clevis

145361019
803228550113: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-362-5334
Access Cover

143625334
212847: RNCC: 3 | RNVC: 2

19 Mar 1980

5340-14-473-2034
Access Cover

144732034
N113476: RNCC: 3 | RNVC: 2
89473636: RNCC: 5 | RNVC: 2

7 Dec 1994

5340-14-526-4527
Pipe Hanger

145264527
RA1M704936811N1: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-301-0511
Rod End Clevis

143010511
1050690006: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-527-9679
Metal Grille

145279679
F1350121: RNCC: 3 | RNVC: 2

5 Dec 2001

5340-14-489-0021
Rim Lock

144890021
303018X35017A: RNCC: 3 | RNVC: 9
303018035017A: RNCC: 5 | RNVC: 9
F300 0T 020 0642: RNCC: 6 | RNVC: 9

18 Jun 1997

5340-14-497-6287
Access Cover

144976287
10243235: RNCC: 3 | RNVC: 2
F300 0T 023 4326: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-524-6206
Mounting Bracket

145246206
15A1276: RNCC: 3 | RNVC: 2

29 Mar 2001

5340-14-549-1267
Access Cover

145491267
0177700250: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-505-3781
Rod End Clevis

145053781
10213153: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-477-9101
Access Cover

144779101
1057603G00: RNCC: 3 | RNVC: 2

2 Oct 1995

5340-14-535-2252
Webbing Strap

145352252
20009-PL: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-361-1602
Loop Clamp

143611602
164589: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-382-6152
Access Cover

143826152
16761187: RNCC: 3 | RNVC: 2
16761187: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-551-2022
Access Cover

145512022
9983968: RNCC: 3 | RNVC: 2

6 Sep 2006

5340-14-484-6030
Access Cover

144846030
1074975Q00: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-352-5601
Rod End Clevis

143525601
A11A572002321: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-360-6901
Anchor Strap

143606901
102172606: RNCC: 3 | RNVC: 2
102172606: RNCC: 5 | RNVC: 2
102172606A: RNCC: 5 | RNVC: 2

19 Dec 1979

5340-14-421-2999
Angle Bracket

144212999
20348429: RNCC: 3 | RNVC: 2

14 Jan 1988

5340-14-375-6979
Angle Bracket

143756979
483287: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-344-1571
Access Cover

143441571
164812: RNCC: 3 | RNVC: 2
224981: RNCC: 5 | RNVC: 2

10 Aug 1977

5340-14-512-7424
Pipe Hanger

145127424
800039370: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-354-1005
Angle Bracket

143541005
012059003701: RNCC: 3 | RNVC: 2
012059003701: RNCC: 5 | RNVC: 2

16 Jan 1979

5340-14-361-1753
Rod End Clevis

143611753
BAZ94406: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-300-3466
Bumper

143003466
15145400: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-555-8658
Access Cover

145558658
82086094000: RNCC: 3 | RNVC: 2

19 Dec 2007

5340-14-392-7934
Anchor Strap

143927934
1312-32: RNCC: 3 | RNVC: 2
7910030870: RNCC: 5 | RNVC: 2

7 Apr 1984

5340-14-518-8910
Access Cover

145188910
47127611: RNCC: 3 | RNVC: 2

23 Feb 2000

5340-14-381-2101
Anchor Strap

143812101
0000715039: RNCC: 3 | RNVC: 2
0000715039: RNCC: 5 | RNVC: 9
715039: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-486-6271
Utility Access Door

144866271
0000102701: RNCC: 3 | RNVC: 2
0000102701: RNCC: 5 | RNVC: 2
102701: RNCC: 5 | RNVC: 2
12455E: RNCC: 5 | RNVC: 9

26 Mar 1997

5340-14-527-1844
Mounting Bracket

145271844
10456364: RNCC: 3 | RNVC: 2

10 Oct 2001

5340-14-516-6797
Mounting Bracket

145166797
40161098: RNCC: 3 | RNVC: 2

12 Oct 1999

5340-14-550-7521
Access Cover

145507521
61646304AC: RNCC: 3 | RNVC: 2

11 Jul 2006

5340-14-512-7376
Pipe Hanger

145127376
800033860: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-456-8051
Mounting Bracket

144568051
306703: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-14-508-5201
Synchro Clamp

145085201
10517071: RNCC: 3 | RNVC: 2

16 Sep 1998

5340-14-434-0385
Angle Bracket

144340385
538536: RNCC: 3 | RNVC: 2

29 Aug 1989

5340-14-506-9072
Mounting Plate

145069072
191306226: RNCC: 3 | RNVC: 9

27 May 1998

5340-14-396-5969
Rod End Clevis

143965969
66443: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-437-2823
Mounting Plate

144372823
16604036: RNCC: 3 | RNVC: 2

24 Jan 1990

5340-14-465-0208
Anchor Strap

144650208
MB1466F00: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-504-2060
Mounting Bracket

145042060
25414M94: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-526-5043
Pipe Hanger

145265043
D66428: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-508-1253
Catch Strike

145081253
10199923: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-357-8429
Catch Strike

143578429
5000495792: RNCC: 3 | RNVC: 2
5000495792: RNCC: 5 | RNVC: 9

20 Jul 1979

5340-14-286-8861
Spring Window Bolt

142868861
A10-21-497-07-0: RNCC: 3 | RNVC: 2
A10-21-497-07-0: RNCC: 5 | RNVC: 2
A10-21-497-07-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-530-3659
Catch Strike

145303659
10148480: RNCC: 3 | RNVC: 2

5 Jun 2002

5340-14-344-7344
Catch Strike

143447344
EA1M881-022: RNCC: 3 | RNVC: 2

9 Sep 1977

5340-14-445-9675
Catch Strike

144459675
1060731301: RNCC: 3 | RNVC: 2
1060731301: RNCC: 5 | RNVC: 2

27 Feb 1991

5340-14-522-5823
Mounting Bracket

145225823
56114998: RNCC: 3 | RNVC: 2

8 Nov 2000

5340-14-533-9831
Mounting Bracket

145339831
10662022: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-417-4757
Loop Clamp

144174757
51100005026: RNCC: 3 | RNVC: 2
15N26: RNCC: 5 | RNVC: 2
15NA26: RNCC: 5 | RNVC: 2

8 Jul 1987

5340-14-528-8758
Mounting Plate

145288758
TS140446: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-14-484-6076
Lock Bolt

144846076
06470360: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-422-1670
Surface Bolt

144221670
1204124P005: RNCC: 3 | RNVC: 2
ST448M11P46A: RNCC: 5 | RNVC: 2
ST448M11P46: RNCC: 5 | RNVC: 2

24 Feb 1988

5340-14-465-7706
Loop Clamp

144657706
408743-1: RNCC: 3 | RNVC: 2
Z00.N6000707223: RNCC: 5 | RNVC: 2
Z00.N6000707223TBM: RNCC: 5 | RNVC: 9

14 Oct 1993

5340-14-283-6710
Loop Clamp

142836710
53954-4: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-517-6436
Angle Bracket

145176436
CRM280710491: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-447-4588
Compression Cup

144474588
71578 388: RNCC: 3 | RNVC: 9

15 May 1991

5340-14-529-2272
Mounting Bracket

145292272
010243035P: RNCC: 3 | RNVC: 2

19 Mar 2002

5340-14-524-5286
Section Block Clamp

145245286
0120781606: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-354-5942
Handle Grip

143545942
12-21-45-2: RNCC: 3 | RNVC: 2
12-21-45-2: RNCC: 5 | RNVC: 2

31 Jan 1979

5340-14-550-9181
Angle Bracket

145509181
RA1B701876721A1N1: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-263-4172
Angle Bracket

142634172
R403933: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-498-2437
Bow Handle

144982437
91938519: RNCC: 3 | RNVC: 2
JCB2DMA3-3-6: RNCC: 5 | RNVC: 2
F300 0T 004 6454: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-528-4997
Mounting Bracket

145284997
MA1523F00: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-350-2729
Retaining Strap

143502729
53NC402561: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-336-4987
Retaining Strap

143364987
194049: RNCC: 3 | RNVC: 2

14 Aug 1976

5340-14-263-4163
Retaining Strap

142634163
R403785: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-530-2332
Angle Bracket

145302332
27167038-1: RNCC: 3 | RNVC: 2

22 May 2002

5340-14-514-1788
Bumper

145141788
15271-5409-0: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-14-499-8357
Mounting Bracket

144998357
74506-7: RNCC: 3 | RNVC: 2
74506.7: RNCC: 3 | RNVC: 2
F300 0T 023 8262: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-488-1666
Leakproof Seal Plug

144881666
207140-0: RNCC: 3 | RNVC: 2
NR201500069: RNCC: 5 | RNVC: 2

18 Apr 1997

5340-14-347-4998
Access Cover

143474998
16889236: RNCC: 3 | RNVC: 2
16889236: RNCC: 3 | RNVC: 9

1 Mar 1978

5340-14-402-1035
Mending Plate

144021035
400545: RNCC: 3 | RNVC: 2
BGE400545: RNCC: 5 | RNVC: 2

26 Jun 1985

5340-14-543-9644
Mounting Plate

145439644
4773126980: RNCC: 3 | RNVC: 9

19 Dec 2004

5340-14-395-4437
Rod End Clevis

143954437
2-24447: RNCC: 3 | RNVC: 2

25 Oct 1984

5340-14-403-2414
Mounting Plate

144032414
16799249: RNCC: 3 | RNVC: 2
16799249: RNCC: 3 | RNVC: 9

31 Jul 1985

5340-14-382-5121
Angle Bracket

143825121
20069135: RNCC: 3 | RNVC: 2
20069135: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-517-4798
Runner

145174798
96192937: RNCC: 3 | RNVC: 2

17 Dec 1999

5340-14-446-4958
Spring Window Bolt

144464958
81004666: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-14-379-3898
Catch Strike

143793898
NO PRIMARY REF14-379-3898: RNCC: 3 | RNVC: 2
345-67512-0: RNCC: 5 | RNVC: 9
345675120: RNCC: 5 | RNVC: 9

1 Oct 1982

5340-14-463-2215
Catch Strike

144632215
44021433: RNCC: 3 | RNVC: 2
44021433: RNCC: 5 | RNVC: 9

26 May 1993

5340-14-460-7098
Catch Strike

144607098
16-1-3639: RNCC: 3 | RNVC: 2
91737559: RNCC: 5 | RNVC: 2

4 Feb 1993

5340-14-533-9708
Mortise Bolt

145339708
56294060: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-387-3529
Catch Strike

143873529
30014: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-14-509-1977
Catch Strike

145091977
46237477: RNCC: 3 | RNVC: 2
46237477: RNCC: 3 | RNVC: 9

21 Oct 1998

5340-14-379-1507
Spring Window Bolt

143791507
21308372-01: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-527-0804
Catch Strike

145270804
5000192622: RNCC: 3 | RNVC: 2

1 Oct 2001

5340-14-473-9936
Catch Strike

144739936
350A25-1265-25: RNCC: 3 | RNVC: 2

20 Jan 1995

5340-14-326-3706
Catch Strike

143263706
R00266-03: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-427-9548
Catch Strike

144279548
134-057: RNCC: 3 | RNVC: 9
91605679: RNCC: 5 | RNVC: 2
134057: RNCC: 5 | RNVC: 2

24 Nov 1988

5340-14-545-3471
Catch Strike

145453471
C526A2206201: RNCC: 3 | RNVC: 2

6 Apr 2005

5340-14-403-9307
Flush Bolt

144039307
33725: RNCC: 3 | RNVC: 2
501264: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-347-3866
Catch Strike

143473866
7024-51: RNCC: 3 | RNVC: 2
1300: RNCC: 5 | RNVC: 2

1 Mar 1978

5340-14-500-9642
Catch Strike

145009642
2.42.00.08/5: RNCC: 3 | RNVC: 9
2.42.00.08/5: RNCC: 5 | RNVC: 9
F300 0T 024 9855: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-521-2937
Catch Strike

145212937
10503006: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-367-6622
Catch Strike

143676622
AC160IB: RNCC: 3 | RNVC: 2
0220250C00: RNCC: 5 | RNVC: 2

19 Jan 1981

5340-14-327-7851
Barrel Bolt

143277851
J36-391-60LAIT0N: RNCC: 2 | RNVC: 2

2 Jul 1975

5340-14-291-5891
Barrel Bolt

142915891
4R013308: RNCC: 3 | RNVC: 2
4R013308: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-508-7465
Catch Strike

145087465
19203482: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-14-364-7465
Catch Strike

143647465
533214: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-14-525-2735
Catch Strike

145252735
10481049: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-323-8382
Catch Strike

143238382
AC112IB: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-524-3925
Catch Strike

145243925
365A21-3557-23: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-414-3344
Catch Strike

144143344
DA1D210263006A1: RNCC: 3 | RNVC: 2

28 Jan 1987

5340-14-445-4949
Catch Strike

144454949
ST406M12P73: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-251-5352
Catch Strike

142515352
E4M221-21-02: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-366-3231
Catch Strike

143663231
330A58-6184-00: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-475-8780
Catch Strike

144758780
AC.135-BR: RNCC: 3 | RNVC: 2
1047839L00: RNCC: 5 | RNVC: 2
AC135BR: RNCC: 5 | RNVC: 2

10 May 1995

5340-14-405-1699
Catch Strike

144051699
AC.151-BR: RNCC: 3 | RNVC: 2
AC151BR: RNCC: 5 | RNVC: 2

27 Nov 1985

5340-14-409-4788
Catch Strike

144094788
162527: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-371-1507
Catch Strike

143711507
330A25-2710-20: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-356-2331
Catch Strike

143562331
0000659307: RNCC: 3 | RNVC: 2
0000659307: RNCC: 5 | RNVC: 9
659307: RNCC: 5 | RNVC: 9

25 Apr 1979

5340-14-384-4213
Catch Strike

143844213
AC.146-IB: RNCC: 3 | RNVC: 2
AC146IB: RNCC: 5 | RNVC: 2

4 May 1983

5340-14-504-9312
Catch Strike

145049312
GACHE91120X00: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-463-2214
Catch Strike

144632214
44021424: RNCC: 3 | RNVC: 2
44021424: RNCC: 5 | RNVC: 9

26 May 1993

5340-14-463-2216
Catch Strike

144632216
44021432: RNCC: 3 | RNVC: 2
44021432: RNCC: 5 | RNVC: 9

26 May 1993

5340-14-484-1061
Catch Strike

144841061
M421571A1426A01: RNCC: 3 | RNVC: 2

24 Oct 1996

5340-14-379-7306
Catch Strike

143797306
AC.104-IB: RNCC: 3 | RNVC: 2
AC104IB: RNCC: 5 | RNVC: 2

20 Oct 1982

5340-14-354-3336
Barrel Bolt

143543336
162431: RNCC: 3 | RNVC: 2

31 Jan 1979

5340-14-257-2257
Catch Strike

142572257
330A25-0108-21: RNCC: 3 | RNVC: 2
330A25-0108-2100: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-371-5861
Catch Strike

143715861
FA2B211-21813: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-473-3788
Catch Strike

144733788
332A22-1884-25: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-338-7688
Catch Strike

143387688
VITH20-17203: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-428-3047
Catch Strike

144283047
140A752: RNCC: 3 | RNVC: 9
140A752-1: RNCC: 5 | RNVC: 9

8 Dec 1988

5340-14-531-2405
Angle Bracket

145312405
F1264708: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-525-2711
Mounting Bracket

145252711
10503681: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-500-0636
Angle Bracket

145000636
9301190043: RNCC: 3 | RNVC: 2
F300 0T 024 0626: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-531-2410
Webbing Strap

145312410
F1264732: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-440-6410
Mounting Plate

144406410
16317318: RNCC: 3 | RNVC: 2

18 Jul 1990

5340-14-392-3965
Retaining Clip

143923965
401MA0577F2: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-526-4816
Cover Strip

145264816
RA1M227510531N1: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-512-8160
Bow Handle

145128160
202226: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-522-3627
Retaining Bail

145223627
OB0136: RNCC: 3 | RNVC: 2

25 Oct 2000

5340-14-464-1525
Access Cover

144641525
ST406M42A02: RNCC: 3 | RNVC: 2

15 Jul 1993

5340-14-366-7881
Access Cover

143667881
969156: RNCC: 3 | RNVC: 2
969156: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-394-1638
Butt Hinge

143941638
1014-40X250ACIERZINGUEBICHR0MATE: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-454-8845
Protection Bellows

144548845
5000704994: RNCC: 3 | RNVC: 2

24 Apr 1992

5340-14-339-3480
Retaining Strap

143393480
TH20A1249: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-398-9344
Angle Bracket

143989344
242577: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-456-4491
Rim Lock Set

144564491
0022521017: RNCC: 3 | RNVC: 2

2 Jul 1992

5340-14-424-2643
Loop Clamp

144242643
069612: RNCC: 3 | RNVC: 2
16311563: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-384-7286
Mending Plate

143847286
20117541: RNCC: 3 | RNVC: 2

2 Jun 1983

5340-14-486-3638
Mounting Plate

144863638
264006: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-406-0565
Retaining Strap

144060565
605164: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-427-7550
Mounting Plate

144277550
ML231: RNCC: 3 | RNVC: 9
91599226: RNCC: 5 | RNVC: 2

9 Nov 1988

5340-14-454-4857
Webbing Strap

144544857
215189002: RNCC: 3 | RNVC: 2
2151890020000: RNCC: 5 | RNVC: 2
5000289639: RNCC: 5 | RNVC: 2
215189002: RNCC: 5 | RNVC: 9

2 Apr 1992

5340-14-246-1892
Retaining Strap

142461892
28834: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-545-4610
Access Cover

145454610
BMU010130A2N1: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-445-5145
Mounting Bracket

144455145
ST406M75P97E13: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-432-3756
Expansion Plug

144323756
540412: RNCC: 3 | RNVC: 2
00540412: RNCC: 5 | RNVC: 2

7 Jun 1989

5340-14-394-7623
Mounting Plate

143947623
S8002LS025F12F: RNCC: 3 | RNVC: 2

28 Aug 1984

5340-14-506-7314
Mounting Bracket

145067314
10214229: RNCC: 3 | RNVC: 2

13 May 1998

5340-14-381-7776
Angle Bracket

143817776
20070372: RNCC: 3 | RNVC: 2
20070372: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-360-1629
Angle Bracket

143601629
A11A221176280: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-534-2975
Lock Bolt

145342975
NNM0010534018007: RNCC: 2 | RNVC: 2

19 Mar 2003

5340-14-446-0100
Mounting Plate

144460100
31-38951: RNCC: 3 | RNVC: 2
31-38951: RNCC: 5 | RNVC: 9

4 Mar 1991

5340-14-552-1536
Angle Bracket

145521536
RA1M701513271N1: RNCC: 3 | RNVC: 2

29 Nov 2006

5340-14-511-6153
Cover Strip

145116153
RA1M292580131: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-385-2145
Control Rod

143852145
3700295: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-410-5279
Runner

144105279
16954114: RNCC: 3 | RNVC: 9

2 Jul 1986

5340-14-443-3456
Synchro Clamp

144433456
1334T03-24: RNCC: 3 | RNVC: 2
76136: RNCC: 5 | RNVC: 2
1334T03-24: RNCC: 5 | RNVC: 9

19 Nov 1990

5340-14-546-5580
Buckle

145465580
13311112PN: RNCC: 3 | RNVC: 2

20 Jul 2005

5340-14-537-2088
Webbing Strap

145372088
56940481AA: RNCC: 3 | RNVC: 2

14 Oct 2003

5340-14-383-5343
Pipe Hanger

143835343
20190242: RNCC: 3 | RNVC: 2
20190242: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-368-6475
Loop Clamp

143686475
51215305030: RNCC: 3 | RNVC: 2
20S30: RNCC: 5 | RNVC: 2

20 Feb 1981

5340-14-517-9959
Loop Clamp

145179959
5003079008: RNCC: 3 | RNVC: 2
060649850921: RNCC: 3 | RNVC: 9

21 Jan 2000

5340-14-454-4724
Retaining Strap

144544724
ST406M75P59: RNCC: 3 | RNVC: 2

2 Apr 1992

5340-14-476-7094
Mounting Bracket

144767094
101160911440: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-14-544-0587
Mounting Bracket

145440587
5010604170: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-14-456-9554
Angle Bracket

144569554
537100210001: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-14-544-7427
Mounting Plate

145447427
5010230951: RNCC: 3 | RNVC: 2

22 Feb 2005

5340-14-370-3100
Retaining Band

143703100
16295405: RNCC: 3 | RNVC: 2
16295405: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-551-8553
Mounting Bracket

145518553
43012002: RNCC: 3 | RNVC: 2
43012002: RNCC: 3 | RNVC: 9

2 Nov 2006

5340-14-542-0828
Mounting Bracket

145420828
6401RLT100: RNCC: 3 | RNVC: 2

2 Jul 2004

5340-14-518-1210
Mounting Bracket

145181210
5000715148: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-520-0144
Mounting Bracket

145200144
10504838: RNCC: 3 | RNVC: 2

3 May 2000

5340-14-507-8523
Retaining Strap

145078523
47136532: RNCC: 3 | RNVC: 2

20 Aug 1998

5340-14-525-2728
Bumper

145252728
10442981: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-451-7764
Mounting Bracket

144517764
ST406M52P88SP: RNCC: 3 | RNVC: 2
ST406M52P88SP: RNCC: 5 | RNVC: 2

4 Dec 1991

5340-14-482-4353
Cover Strip

144824353
RA1M228770252A1: RNCC: 3 | RNVC: 2

11 Jul 1996

5340-14-428-6297
Block Clamp

144286297
LB11211556026: RNCC: 3 | RNVC: 2
11211556026: RNCC: 5 | RNVC: 2

8 Dec 1988

5340-14-383-4944
Retaining Strap

143834944
556770: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-397-4017
Angle Bracket

143974017
216893: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-465-8630
Bail Handle

144658630
7354: RNCC: 3 | RNVC: 2

14 Oct 1993

5340-14-448-2465
Mounting Bracket

144482465
5000134799: RNCC: 3 | RNVC: 2

18 Jun 1991

5340-14-549-8449
Angle Bracket

145498449
F1264615: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-517-8849
Access Cover

145178849
223479: RNCC: 3 | RNVC: 2

17 Jan 2000

5340-14-500-8208
Section Block Clamp

145008208
E64009998078: RNCC: 3 | RNVC: 2
F300 0T 024 8410: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-544-7419
Loop Clamp

145447419
5003083131: RNCC: 3 | RNVC: 2

22 Feb 2005

5340-14-521-3032
Utility Access Door

145213032
10530608: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-452-4675
Access Cover

144524675
108060001201: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-457-6138
Block Clamp

144576138
PM1A689304300: RNCC: 3 | RNVC: 2
PM1A689304300: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-310-2312
Access Cover

143102312
77629UE10Z1-ANY: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-465-8745
Bow Handle

144658745
61398: RNCC: 3 | RNVC: 2

14 Oct 1993

5340-14-471-6388
Mounting Bracket

144716388
M412310A0044B01: RNCC: 3 | RNVC: 2

7 Sep 1994

5340-14-521-7332
Utility Access Door

145217332
010105019P: RNCC: 3 | RNVC: 2

12 Sep 2000

5340-14-504-0723
Mounting Bracket

145040723
MB1154F00: RNCC: 3 | RNVC: 2

5 Feb 1998

5340-14-474-6736
Access Cover

144746736
45584179: RNCC: 3 | RNVC: 9

22 Feb 1995

5340-14-447-7345
Plug Button

144477345
ISOL451: RNCC: 3 | RNVC: 2

29 May 1991

5340-14-530-0397
Synchro Clamp

145300397
4233257: RNCC: 3 | RNVC: 2
4233257: RNCC: 5 | RNVC: 2

30 Apr 2002

5340-14-455-5642
Mounting Bracket

144555642
1060498: RNCC: 3 | RNVC: 2
1060498: RNCC: 5 | RNVC: 9
5044748: RNCC: 5 | RNVC: 9

28 May 1992

5340-14-427-9559
Shelf Bracket

144279559
212170: RNCC: 3 | RNVC: 2
89408924: RNCC: 5 | RNVC: 2

24 Nov 1988

5340-14-493-4846
Access Cover

144934846
5000655585: RNCC: 3 | RNVC: 2
F300 0T 013 2752: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-400-0025
Access Cover

144000025
607607: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-551-3541
Angle Bracket

145513541
RA1A703916151N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-524-3501
Mounting Plate

145243501
SD001PD010207: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-483-4509
Mounting Bracket

144834509
4608064: RNCC: 3 | RNVC: 2
5610814: RNCC: 5 | RNVC: 2
91765695: RNCC: 5 | RNVC: 2
4608064: RNCC: 5 | RNVC: 9
5610814: RNCC: 5 | RNVC: 9

12 Sep 1996

5340-14-530-1232
Mounting Plate

145301232
TB3050713: RNCC: 3 | RNVC: 2

14 May 2002

5340-14-531-2540
Loop Clamp

145312540
51300002010: RNCC: 3 | RNVC: 2

6 Aug 2002

5340-14-502-6814
Mounting Bracket

145026814
1044448Y01: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-481-3656
Picture Hanger

144813656
10023958: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-376-4594
Access Cover

143764594
16558672: RNCC: 3 | RNVC: 2
16558672: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-375-7855
Access Cover

143757855
2206-911B505: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-362-4774
Anchor Strap

143624774
5000499068: RNCC: 3 | RNVC: 2
5000499068: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-337-0586
Access Cover

143370586
3R010806: RNCC: 3 | RNVC: 9

7 Oct 1976

5340-14-351-5719
Access Cover

143515719
112578: RNCC: 3 | RNVC: 2
BFCSAMM112578: RNCC: 5 | RNVC: 2

12 Sep 1978

5340-14-488-2179
Access Cover

144882179
29730021: RNCC: 3 | RNVC: 2
29730021: RNCC: 3 | RNVC: 9

23 Apr 1997

5340-14-477-1607
Synchro Clamp

144771607
280788008: RNCC: 3 | RNVC: 2

26 Jul 1995

5340-14-463-3245
Mounting Plate

144633245
0000052101: RNCC: 3 | RNVC: 2

9 Jun 1993

5340-14-459-9192
Loop Clamp

144599192
NOR023782: RNCC: 3 | RNVC: 2

24 Dec 1992

5340-14-516-3432
Bridge Clamp

145163432
1089573Y02: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-540-1588
Mounting Bracket

145401588
AW61: RNCC: 3 | RNVC: 2
73M36: RNCC: 5 | RNVC: 2
305M19: RNCC: 5 | RNVC: 2

11 Mar 2004

5340-14-436-2100
Mounting Plate

144362100
DA2C228651001U1: RNCC: 3 | RNVC: 2

6 Dec 1989

5340-14-547-9384
Strap Fastener Loop

145479384
61075: RNCC: 3 | RNVC: 2
18902512-5: RNCC: 5 | RNVC: 2

28 Nov 2005

5340-14-544-2211
Mounting Bracket

145442211
AMPC GENE E213364: RNCC: 3 | RNVC: 2

11 Jan 2005

5340-14-419-7876
Synchro Clamp

144197876
160H732402-20: RNCC: 3 | RNVC: 2

5 Nov 1987

5340-14-518-1888
Bow Handle

145181888
7700655169: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-447-7003
Rod End Clevis

144477003
NGS1H5104: RNCC: 3 | RNVC: 2

29 May 1991

5340-14-501-0861
Mounting Bracket

145010861
39143807: RNCC: 3 | RNVC: 2
F300 0T 025 1202: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-435-3210
Protection Bellows

144353210
E1081: RNCC: 3 | RNVC: 9
5000809422: RNCC: 5 | RNVC: 9

6 Nov 1989

5340-14-554-4270
Loop Clamp

145544270
51120605019: RNCC: 3 | RNVC: 2

4 Jul 2007

5340-14-433-4654
Runner

144334654
071473L: RNCC: 3 | RNVC: 2

31 Jul 1989

5340-14-549-0926
Angle Bracket

145490926
RA1M704226561N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-358-5582
Friction Catch

143585582
6033: RNCC: 3 | RNVC: 2
391535: RNCC: 5 | RNVC: 2

7 Sep 1979

5340-14-399-0572
Synchro Clamp

143990572
224097: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-449-9857
Buckle

144499857
04464: RNCC: 3 | RNVC: 2
1 16 04464 AG: RNCC: 5 | RNVC: 2

18 Sep 1991

5340-14-500-8698
Angle Bracket

145008698
E66201200000: RNCC: 3 | RNVC: 2
F300 0T 024 8902: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-297-6976
Access Cover

142976976
83965DET9: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-453-6410
Bridge Clamp

144536410
646239: RNCC: 3 | RNVC: 2

3 Mar 1992

5340-14-286-3491
Loop Clamp

142863491
51413105018: RNCC: 3 | RNVC: 2
28G18: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-544-2383
Mounting Plate

145442383
AMPC GENE E213363: RNCC: 3 | RNVC: 2

12 Jan 2005

5340-14-435-8717
Loop Clamp

144358717
431505: RNCC: 3 | RNVC: 2

27 Nov 1989

5340-14-300-4351
Butt Hinge

143004351
1001-100X80ACIER: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-454-4987
Kick Door Plate

144544987
0185100890: RNCC: 3 | RNVC: 2
89473263: RNCC: 5 | RNVC: 2

2 Apr 1992

5340-14-331-1190
Mending Plate

143311190
BAZ1512: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-282-8562
Loop Clamp

142828562
511119050191: RNCC: 3 | RNVC: 2
35P19: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-276-0124
Control Rod

142760124
25389: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-421-6362
Retaining Strap

144216362
217372: RNCC: 3 | RNVC: 2

20 Jan 1988

5340-14-548-1084
Angle Bracket

145481084
RA1A702506061: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-539-5216
Webbing Strap

145395216
290848: RNCC: 3 | RNVC: 2
290848: RNCC: 5 | RNVC: 2

22 Jan 2004

5340-14-551-9209
Surface Bolt

145519209
43044011: RNCC: 3 | RNVC: 2
43044011: RNCC: 3 | RNVC: 9

8 Nov 2006

5340-14-548-1216
Mounting Bracket

145481216
5430060795: RNCC: 3 | RNVC: 2

12 Dec 2005

5340-14-544-2865
Mounting Bracket

145442865
S931A1140101: RNCC: 3 | RNVC: 2

17 Jan 2005

5340-14-551-6171
Expansion Shield

145516171
4603: RNCC: 3 | RNVC: 2
A050565: RNCC: 5 | RNVC: 2

10 Oct 2006

5340-14-552-6410
Mounting Bracket

145526410
9405CEL1030008: RNCC: 3 | RNVC: 2

18 Jan 2007

5340-14-551-3499
Angle Bracket

145513499
RA1M704116071: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-553-2542
Bail Handle

145532542
467324: RNCC: 3 | RNVC: 2

19 Mar 2007

5340-14-455-3837
Mounting Plate

144553837
16293232: RNCC: 3 | RNVC: 2
16293232: RNCC: 5 | RNVC: 9

21 May 1992

5340-14-489-5419
Access Cover

144895419
45576566: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-14-485-6404
Block Clamp

144856404
45390188: RNCC: 3 | RNVC: 2

6 Feb 1997

5340-14-443-8765
Loop Clamp

144438765
51120605025: RNCC: 3 | RNVC: 2
240692500: RNCC: 5 | RNVC: 2
24FE25: RNCC: 5 | RNVC: 9

11 Dec 1990

5340-14-477-7843
Bumper

144777843
T700A5610000128: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-14-505-2347
Access Cover

145052347
4526916A: RNCC: 3 | RNVC: 2
4526916A: RNCC: 5 | RNVC: 9

16 Mar 1998

5340-14-484-6576
Mounting Plate

144846576
29403672: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-339-3671
Access Cover

143393671
GM92277: RNCC: 3 | RNVC: 2
GM92277: RNCC: 5 | RNVC: 2
GM92277: RNCC: 5 | RNVC: 2
GM92277: RNCC: 5 | RNVC: 9

18 Jan 1977

5340-14-505-0499
Rod End Clevis

145050499
0007009256: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-346-1742
Retaining Band

143461742
31294: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-468-6461
Plug Button

144686461
008659222P: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-14-545-5434
Access Cover

145455434
56939556AA: RNCC: 3 | RNVC: 2

19 Apr 2005

5340-14-526-4506
Pipe Hanger

145264506
RA1M704724651N1: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-466-9653
Angle Bracket

144669653
3420491: RNCC: 3 | RNVC: 2
420491: RNCC: 5 | RNVC: 2

9 Dec 1993

5340-14-532-0513
Mounting Bracket

145320513
0RW32900: RNCC: 3 | RNVC: 2
0RW32900: RNCC: 5 | RNVC: 9

9 Oct 2002

5340-14-524-1959
Access Cover

145241959
10343768: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-391-6021
Access Cover

143916021
045S03-576017R: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-335-1603
Quick Release Pin

143351603
BLS8B15S: RNCC: 3 | RNVC: 2
BLS8B15S: RNCC: 5 | RNVC: 2
BLS8BA15S: RNCC: 5 | RNVC: 2

3 Jun 1976

5340-14-363-8388
Runner

143638388
0851513700: RNCC: 3 | RNVC: 2
0851513700: RNCC: 5 | RNVC: 9

7 Aug 1980

5340-14-557-9639
Utility Access Door

145579639
5010399803: RNCC: 3 | RNVC: 2

11 Aug 2008

5340-14-541-5181
Angle Bracket

145415181
1091477: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-488-2552
Access Cover

144882552
0320990040: RNCC: 3 | RNVC: 2

23 Apr 1997

5340-14-425-3469
Rod End Clevis

144253469
160H712601-56: RNCC: 3 | RNVC: 2

30 Jun 1988

5340-14-410-6915
Retaining Strap

144106915
251676: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-464-3191
Mounting Bracket

144643191
5260145: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-486-3017
Butt Hinge

144863017
MB1586F00: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-418-2216
Synchro Clamp

144182216
0319777080: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-256-2845
Bow Handle

142562845
70862067: RNCC: 3 | RNVC: 2
70862067: RNCC: 5 | RNVC: 9
862067: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-397-9669
Anchor Strap

143979669
574024514: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-526-4624
Pipe Hanger

145264624
RA1M706345111: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-396-1807
Bumper

143961807
227929: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-546-7331
Mounting Bracket

145467331
S258A4012117: RNCC: 3 | RNVC: 2

9 Aug 2005

5340-14-362-8808
Access Cover

143628808
24106081200: RNCC: 3 | RNVC: 2
106J812: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-553-0724
Mounting Bracket

145530724
0027879: RNCC: 3 | RNVC: 2

27 Feb 2007

5340-14-550-9196
Angle Bracket

145509196
RA1B702502171: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-469-4962
Anchor Strap

144694962
5000903783: RNCC: 3 | RNVC: 2

27 Apr 1994

5340-14-517-8611
Eye Hook

145178611
4CR101P01: RNCC: 3 | RNVC: 2

14 Jan 2000

5340-14-540-9891
Cover Strip

145409891
RA1M228770251A3N1: RNCC: 3 | RNVC: 2

5 May 2004

5340-14-448-0806
Rod End Connector

144480806
PM1A237182004: RNCC: 3 | RNVC: 2
PM1A237182004: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-370-8376
Quick Release Pin

143708376
24C1131: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-483-2082
Pawl Fastener

144832082
2672828: RNCC: 3 | RNVC: 2

27 Aug 1996

5340-14-360-3365
Rim Latch

143603365
NBC10AHE370: RNCC: 3 | RNVC: 2

23 Nov 1979

5340-14-420-4585
Access Cover

144204585
06180877: RNCC: 3 | RNVC: 2

10 Dec 1987

5340-14-524-3345
Rod End Connector

145243345
1075684Y00: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-555-8059
Access Cover

145558059
0164047680: RNCC: 3 | RNVC: 2

14 Dec 2007

5340-14-508-0823
Bumper

145080823
4773921630: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-534-5219
Rod End Clevis

145345219
6501EHS100004: RNCC: 3 | RNVC: 2

26 Mar 2003

5340-14-521-4641
Metal Grille

145214641
96117553: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-14-354-1053
Retaining Strap

143541053
0120590056: RNCC: 3 | RNVC: 2
0120590056: RNCC: 5 | RNVC: 2

16 Jan 1979

5340-14-334-5243
Bow Handle

143345243
99034650: RNCC: 3 | RNVC: 2
P107: RNCC: 3 | RNVC: 2
99034650: RNCC: 5 | RNVC: 2
99034650: RNCC: 5 | RNVC: 9
P107: RNCC: 5 | RNVC: 9

1 Jun 1976

5340-14-524-1072
Elastic Strap

145241072
530104: RNCC: 3 | RNVC: 2

28 Feb 2001

5340-14-032-1130
Anchor Strap

140321130
A11A742321011: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-550-1925
Access Cover

145501925
56941337AA: RNCC: 3 | RNVC: 2

7 Jun 2006

5340-14-528-0435
Strap Hinge

145280435
2778: RNCC: 3 | RNVC: 2

12 Dec 2001

5340-14-481-3754
Mounting Bracket

144813754
262156: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-433-2170
Angle Bracket

144332170
5000920551: RNCC: 3 | RNVC: 2

18 Jul 1989

5340-14-305-4588
Loop Clamp

143054588
21S0500601: RNCC: 3 | RNVC: 2
21S0500601: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-484-0413
Loop Clamp

144840413
532121: RNCC: 3 | RNVC: 2
89167738: RNCC: 5 | RNVC: 2

17 Oct 1996

5340-14-041-5174
Retaining Strap

140415174
107921: RNCC: 3 | RNVC: 2
107921: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-524-0663
Mounting Bracket

145240663
8024123F00: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-14-504-3353
Mounting Bracket

145043353
3900645M91: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-506-2193
Mounting Plate

145062193
38222899: RNCC: 3 | RNVC: 2
38222899: RNCC: 5 | RNVC: 9

15 Apr 1998

5340-14-437-9717
Clamp Bolt Assembly

144379717
5000117950: RNCC: 3 | RNVC: 2

5 Mar 1990

5340-14-434-0683
Angle Bracket

144340683
535948: RNCC: 3 | RNVC: 2

4 Sep 1989

5340-14-545-0412
Mounting Bracket

145450412
T322G1003807: RNCC: 3 | RNVC: 2

16 Mar 2005

5340-14-391-8723
Cover Strip

143918723
57168: RNCC: 3 | RNVC: 9
57168: RNCC: 3 | RNVC: 9
3039B: RNCC: 5 | RNVC: 2

21 Mar 1984

5340-14-254-2388
Retaining Strap

142542388
383029070: RNCC: 3 | RNVC: 9
1-18F: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-531-7946
Eye Hook

145317946
E69304110000: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-493-7274
Webbing Strap

144937274
661005: RNCC: 3 | RNVC: 9

15 Oct 1997

5340-14-516-6818
Bumper

145166818
46945198: RNCC: 3 | RNVC: 2

12 Oct 1999

5340-14-439-2913
Cover Strip

144392913
DA2C261035039: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-530-5859
Mounting Bracket

145305859
000070K2: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-14-540-5838
Angle Bracket

145405838
46038886: RNCC: 3 | RNVC: 2

7 Apr 2004

5340-14-436-2042
Mounting Plate

144362042
DA2C228554001U1: RNCC: 3 | RNVC: 2

6 Dec 1989

5340-14-430-4468
Loop Clamp

144304468
SM320PAIS: RNCC: 3 | RNVC: 2

22 Mar 1989

5340-14-472-7133
Detent Plunger

144727133
4281456: RNCC: 3 | RNVC: 2
4281456: RNCC: 5 | RNVC: 9

9 Nov 1994

5340-14-367-4623
Angle Bracket

143674623
A11A221160481: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-518-0548
Angle Bracket

145180548
5010114410: RNCC: 3 | RNVC: 2

25 Jan 2000

5340-14-533-2418
Mounting Plate

145332418
P106723VK: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-270-1896
Mending Plate

142701896
0176-561007: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-554-6913
Clamping Catch

145546913
50534200: RNCC: 3 | RNVC: 2

6 Aug 2007

5340-14-537-4416
Bow Handle

145374416
895002: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-443-3453
Synchro Clamp

144433453
1334T03-14: RNCC: 3 | RNVC: 2
76138: RNCC: 5 | RNVC: 2
1334T03-14: RNCC: 5 | RNVC: 9

19 Nov 1990

5340-14-518-4662
Mounting Bracket

145184662
T716A2002112: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-520-6189
Flush Catch Claw

145206189
GA46231: RNCC: 3 | RNVC: 2

24 May 2000

5340-14-479-6009
Mounting Bracket

144796009
23627061-2: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-14-332-4908
Pipe Hanger

143324908
F10A113116009: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-452-6993
Retaining Strap

144526993
62759: RNCC: 3 | RNVC: 2

15 Jan 1992

5340-14-480-8801
Mounting Plate

144808801
79047851-1: RNCC: 3 | RNVC: 2
79047851-1: RNCC: 5 | RNVC: 9

6 Apr 1996

5340-14-485-3965
Access Cover

144853965
203-6: RNCC: 3 | RNVC: 2

23 Jan 1997

5340-14-486-6262
Access Cover

144866262
513206: RNCC: 3 | RNVC: 2
513206.1.A: RNCC: 5 | RNVC: 2

26 Mar 1997

5340-14-460-3130
Webbing Strap

144603130
1030940A00: RNCC: 3 | RNVC: 2

21 Jan 1993

5340-14-351-1692
Runner

143511692
227459: RNCC: 3 | RNVC: 2
227459: RNCC: 5 | RNVC: 9

10 Aug 1978

5340-14-512-5712
Mounting Bracket

145125712
38167402: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-445-7811
Mounting Plate

144457811
BLC9480: RNCC: 3 | RNVC: 2

25 Feb 1991

5340-14-449-0116
Rim Latch

144490116
45611482: RNCC: 3 | RNVC: 2
45611482: RNCC: 5 | RNVC: 9

24 Jul 1991

5340-14-504-6222
Padlock

145046222
CADEN00003: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-14-517-0306
Loop Clamp

145170306
51520605008: RNCC: 3 | RNVC: 2
21FE8: RNCC: 5 | RNVC: 2
51520618008: RNCC: 5 | RNVC: 2

28 Oct 1999

5340-14-535-2592
Mounting Bracket

145352592
RA1M701206211: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-269-6573
Angle Bracket

142696573
70855023: RNCC: 3 | RNVC: 2
70855023: RNCC: 5 | RNVC: 9
855023: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-453-3630
Angle Bracket

144533630
39714C: RNCC: 3 | RNVC: 2

19 Feb 1992

5340-14-496-3253
Mounting Plate

144963253
109409: RNCC: 3 | RNVC: 2
F300 0T 021 3951: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-552-8250
Recess Handle

145528250
0011880: RNCC: 3 | RNVC: 2

6 Feb 2007

5340-14-554-1738
Mounting Bracket

145541738
82055078001: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-555-6936
Bridge Clamp

145556936
C-C-10099: RNCC: 3 | RNVC: 2

7 Dec 2007

5340-14-451-1143
Angle Bracket

144511143
39361553: RNCC: 3 | RNVC: 9

30 Oct 1991

5340-14-348-7197
Bumper

143487197
702.1735: RNCC: 3 | RNVC: 2
5100338B: RNCC: 3 | RNVC: 2
5100338: RNCC: 3 | RNVC: 9
702.1735 S: RNCC: 5 | RNVC: 2
5000496298: RNCC: 5 | RNVC: 2
5000496298: RNCC: 5 | RNVC: 9

19 Apr 1978

5340-14-430-0690
Strap Fastener Loop

144300690
840761: RNCC: 3 | RNVC: 2
840761ARRET DE SANGLE: RNCC: 5 | RNVC: 2

28 Feb 1989

5340-14-410-5288
Runner

144105288
16954517: RNCC: 3 | RNVC: 9

2 Jul 1986

5340-14-547-7799
Mounting Bracket

145477799
5010650068: RNCC: 3 | RNVC: 2

12 Nov 2005

5340-14-443-7498
Plate Spacer

144437498
45152666: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-14-468-7940
Expansion Shield

144687940
500M320: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-14-464-3249
Angle Bracket

144643249
5260126: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-253-6281
Expansion Plug

142536281
270452: RNCC: 3 | RNVC: 2
270452: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-413-6952
Retaining Strap

144136952
T0P7L901: RNCC: 3 | RNVC: 2
TOP7L901: RNCC: 5 | RNVC: 2

15 Jan 1987

5340-14-553-9477
Runner

145539477
96194895AA: RNCC: 3 | RNVC: 2

4 Jun 2007

5340-14-400-2613
Angle Bracket

144002613
0301010540: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-402-6103
Anchor Strap

144026103
400722: RNCC: 3 | RNVC: 2
BGE400722: RNCC: 5 | RNVC: 2

19 Jul 1985

5340-14-344-6098
Access Cover

143446098
713S3: RNCC: 3 | RNVC: 2

9 Sep 1977

5340-14-429-6812
Access Cover

144296812
158374: RNCC: 3 | RNVC: 2

8 Feb 1989

5340-14-522-3217
Retaining Strap

145223217
10477994: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-14-472-3832
Angle Bracket

144723832
PM1A725422252: RNCC: 3 | RNVC: 2
PM1A725422252: RNCC: 5 | RNVC: 2

19 Oct 1994

5340-14-537-1451
Mounting Plate

145371451
F00146213: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-14-541-5520
Mounting Plate

145415520
4199747: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-547-4437
Access Cover

145474437
5010559987: RNCC: 3 | RNVC: 2

13 Oct 2005

5340-14-397-9148
Access Cover

143979148
475222V: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-367-3868
Retaining Strap

143673868
970911: RNCC: 3 | RNVC: 2
970911: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-532-6773
Utility Access Door

145326773
19222763: RNCC: 3 | RNVC: 2

27 Nov 2002

5340-14-520-3502
Access Cover

145203502
40163328: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-525-4912
Access Cover

145254912
8023140N00: RNCC: 3 | RNVC: 2

6 Jun 2001

5340-14-403-9321
Access Cover

144039321
110580: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-438-3024
Mounting Bracket

144383024
70015234: RNCC: 3 | RNVC: 2
P3948: RNCC: 3 | RNVC: 2
70015234: RNCC: 5 | RNVC: 9
P3948: RNCC: 5 | RNVC: 9

12 Mar 1990

5340-14-546-4001
Bolt And Spacer Kit

145464001
G70462: RNCC: 3 | RNVC: 2

30 Jun 2005

5340-14-390-2858
Control Rod

143902858
146256: RNCC: 3 | RNVC: 9

26 Jan 1984

5340-14-422-4502
Butt Hinge

144224502
181103: RNCC: 3 | RNVC: 2

3 Mar 1988

5340-14-412-1302
Mounting Bracket

144121302
M4Z7101919420: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-518-1200
Mounting Plate

145181200
5000711788: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-526-5017
Mounting Bracket

145265017
D66277: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-397-9749
Retaining Strap

143979749
401011: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-553-2714
Loop Clamp

145532714
FRA503050A: RNCC: 3 | RNVC: 2
FRA503050A: RNCC: 5 | RNVC: 2

20 Mar 2007

5340-14-408-1273
Bow Handle

144081273
640208: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-550-5026
Mounting Plate

145505026
RA1M112181231N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-437-6232
Plate Spacer

144376232
PM1A161310168: RNCC: 3 | RNVC: 2
PM1A161310168: RNCC: 5 | RNVC: 2

7 Feb 1990

5340-14-545-0054
Mounting Bracket

145450054
5010421814: RNCC: 3 | RNVC: 2

14 Mar 2005

5340-14-389-9481
Loop Clamp

143899481
6204594: RNCC: 3 | RNVC: 2
204-594: RNCC: 5 | RNVC: 9
FOE6204594: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-14-424-2576
Mounting Bracket

144242576
0177730170: RNCC: 3 | RNVC: 2
89436440: RNCC: 5 | RNVC: 2
20164666: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-404-6504
Mending Plate

144046504
BA13225: RNCC: 3 | RNVC: 2
223106: RNCC: 5 | RNVC: 2

20 Nov 1985

5340-14-466-2979
Mounting Bracket

144662979
A65253: RNCC: 3 | RNVC: 2

3 Nov 1993

5340-14-335-8672
Bridge Clamp

143358672
163351: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-493-4237
Butt Hinge

144934237
AE2XC520: RNCC: 3 | RNVC: 2
F300 0T 013 0151: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-541-9230
Mounting Bracket

145419230
56294782: RNCC: 3 | RNVC: 2

2 Jul 2004

5340-14-346-7319
Block Clamp

143467319
A11A704111120: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-432-7166
Mounting Bracket

144327166
OUT50084: RNCC: 3 | RNVC: 2
0UT50084: RNCC: 5 | RNVC: 2

21 Jun 1989

5340-14-479-6836
Eye Hook

144796836
01211: RNCC: 3 | RNVC: 2

31 Jan 1996

5340-14-418-4644
Loop Clamp

144184644
4-454510: RNCC: 3 | RNVC: 9
4-454510: RNCC: 5 | RNVC: 2
4-454510: RNCC: 5 | RNVC: 9

26 Aug 1987

5340-14-432-6279
Bow Handle

144326279
F3404F: RNCC: 3 | RNVC: 2
3404B: RNCC: 5 | RNVC: 2
5000356315: RNCC: 5 | RNVC: 2

16 Jun 1989

5340-14-382-9195
Retaining Strap

143829195
224932: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-530-1061
Mounting Bracket

145301061
351119256511: RNCC: 3 | RNVC: 2

14 May 2002

5340-14-553-3886
Mounting Plate

145533886
44038435: RNCC: 3 | RNVC: 2

29 Mar 2007

5340-14-515-3031
Expansion Plug

145153031
0009527028: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-526-2287
Mounting Plate

145262287
H102096: RNCC: 3 | RNVC: 2

11 Jul 2001

5340-14-528-6149
Mounting Bracket

145286149
61080747AA: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-421-7415
Retaining Band

144217415
0308767210: RNCC: 3 | RNVC: 2
89404584: RNCC: 5 | RNVC: 2

27 Jan 1988

5340-14-460-8441
Angle Bracket

144608441
79130176: RNCC: 3 | RNVC: 2
79130176: RNCC: 5 | RNVC: 9

10 Feb 1993

5340-14-517-9494
Access Cover

145179494
10352836: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-14-554-3264
Access Cover

145543264
82357069000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-396-0532
Anchor Strap

143960532
0000483428: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-335-2759
Butt Hinge

143352759
16334204: RNCC: 3 | RNVC: 2
16334204: RNCC: 3 | RNVC: 9

30 Jun 1976

5340-14-489-4873
Handle Grip

144894873
D63DIN6335FONTEGRISE: RNCC: 3 | RNVC: 2
91627577: RNCC: 5 | RNVC: 2
91627577: RNCC: 5 | RNVC: 2

23 Jul 1997

5340-14-550-9221
Angle Bracket

145509221
RA1B702446067: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-367-6307
Anchor Strap

143676307
003105080P: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-364-7094
Anchor Strap

143647094
197297: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-14-537-4464
Case Corner

145374464
MECZ8055: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-348-1884
Rod End Clevis

143481884
C47923: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-519-6947
Mounting Plate

145196947
A09120110: RNCC: 3 | RNVC: 2
A09120110: RNCC: 5 | RNVC: 9

29 Mar 2000

5340-14-394-9132
Mounting Plate

143949132
20732864: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-507-9856
Angle Bracket

145079856
4773120060: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-524-1815
Butt Hinge

145241815
2251275: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-549-1020
Mounting Bracket

145491020
RA1M703165321N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-442-1692
Angle Bracket

144421692
16589861: RNCC: 3 | RNVC: 2

3 Oct 1990

5340-14-548-6226
Angle Bracket

145486226
RA1B702606445: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-526-5233
Mounting Bracket

145265233
D66727: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-442-4043
Bumper

144424043
20669560: RNCC: 3 | RNVC: 2
20669560: RNCC: 3 | RNVC: 9

16 Oct 1990

5340-14-201-3559
Handwheel

142013559
8774: RNCC: 3 | RNVC: 2

1 Jan 1962

5340-14-495-7424
Synchro Clamp

144957424
24C9493: RNCC: 3 | RNVC: 2
F300 0T 019 8208: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-355-1272
Handle Grip

143551272
2360: RNCC: 3 | RNVC: 9

19 Mar 1979

5340-14-355-8948
Turnbuckle Body

143558948
106206: RNCC: 3 | RNVC: 2
106206: RNCC: 5 | RNVC: 2

5 Apr 1979

5340-14-459-5874
Mounting Bracket

144595874
6260200: RNCC: 3 | RNVC: 2
5045262: RNCC: 5 | RNVC: 9

10 Dec 1992

5340-14-512-0478
Bow Handle

145120478
HAPPIC.E0455051: RNCC: 3 | RNVC: 2
0011896: RNCC: 3 | RNVC: 2

3 Feb 1999

5340-14-476-4715
Mounting Bracket

144764715
317362: RNCC: 3 | RNVC: 2
317362: RNCC: 5 | RNVC: 9

14 Jun 1995

5340-14-478-6112
Mounting Bracket

144786112
48302: RNCC: 3 | RNVC: 2

8 Nov 1995

5340-14-445-5398
Mounting Bracket

144455398
39538943: RNCC: 3 | RNVC: 2
39538943: RNCC: 5 | RNVC: 9

14 Feb 1991

5340-14-412-1771
Locking Stay

144121771
174D400: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-359-0771
Angle Bracket

143590771
A11A221260180: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-525-5972
Access Cover

145255972
10 146 400 1100: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-421-8154
Plug Button

144218154
16606: RNCC: 3 | RNVC: 2

27 Jan 1988

5340-14-394-9981
Retaining Strap

143949981
183483: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-444-8705
Mounting Bracket

144448705
39233590: RNCC: 3 | RNVC: 2
39233590: RNCC: 5 | RNVC: 9

23 Jan 1991

5340-14-353-2159
Webbing Strap

143532159
356002030300: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-272-8538
Angle Bracket

142728538
9137885: RNCC: 3 | RNVC: 2
9137885: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-360-7599
Loop Clamp

143607599
145211001: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-403-9362
Anchor Strap

144039362
4771520430: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-341-0706
Access Cover

143410706
26427353: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-278-5325
Tubular Fairlead

142785325
10200068: RNCC: 3 | RNVC: 2
10200068: RNCC: 5 | RNVC: 2
CHR10200068: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-313-8921
Loop Clamp

143138921
51210602010: RNCC: 3 | RNVC: 2
20F10: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-042-9093
Pipe Hanger

140429093
A21A221172211N1: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-543-9738
Mounting Bracket

145439738
19210707: RNCC: 3 | RNVC: 2

19 Dec 2004

5340-14-520-3012
Metal Grille

145203012
06000015: RNCC: 3 | RNVC: 2
6000015: RNCC: 5 | RNVC: 2

17 May 2000

5340-14-472-3248
Mounting Bracket

144723248
DHV1368: RNCC: 3 | RNVC: 2

19 Oct 1994

5340-14-537-6166
Loop Clamp

145376166
RB50INOX: RNCC: 3 | RNVC: 2

12 Nov 2003

5340-14-314-4834
Webbing Strap

143144834
40287: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-500-7099
Section Block Clamp

145007099
E64009998206: RNCC: 3 | RNVC: 2
F300 0T 024 7291: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-555-4196
Mounting Plate

145554196
2035-141-000C: RNCC: 3 | RNVC: 2

8 Nov 2007

5340-14-302-0507
Mending Plate

143020507
A10-74-107-80-0: RNCC: 3 | RNVC: 2
A10-74-107-80-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-412-5824
Access Cover

144125824
300-676-205-0: RNCC: 3 | RNVC: 2
001268050A: RNCC: 5 | RNVC: 2

15 Oct 1986

5340-14-528-8440
Access Cover

145288440
495138: RNCC: 3 | RNVC: 2
PLN495000 IND.E 13/08/01 REP18: RNCC: 5 | RNVC: 2
X.495138: RNCC: 5 | RNVC: 2

20 Feb 2002

5340-14-283-3389
Bumper

142833389
121E23-319-07-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-414-8531
Quick Release Pin

144148531
121E95-195-10-0: RNCC: 3 | RNVC: 2

16 Mar 1987

5340-14-456-6184
Loop Clamp

144566184
75-421-33-90-15183-2: RNCC: 3 | RNVC: 2

9 Jul 1992

5340-14-548-4168
Mounting Plate

145484168
21178580-02: RNCC: 3 | RNVC: 2
23825262-5: RNCC: 5 | RNVC: 2

13 Jan 2006

5340-14-432-1540
Block Clamp

144321540
3511-318-14701: RNCC: 3 | RNVC: 2
3511-318-14701: RNCC: 5 | RNVC: 9

24 May 1989

5340-14-437-9549
Mounting Bracket

144379549
330A76-3005-12: RNCC: 3 | RNVC: 2

28 Feb 1990

5340-14-348-8763
Retaining Strap

143488763
300-687-201-0: RNCC: 3 | RNVC: 2
300-687-201P: RNCC: 5 | RNVC: 2
001378010A: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-458-7344
Arched Cushion

144587344
MAT169-0012F21DE14,5: RNCC: 3 | RNVC: 2

29 Oct 1992

5340-14-306-3007
Tee Hinge

143063007
5450129H: RNCC: 3 | RNVC: 2
AZ841-11B: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-433-5033
Loop Clamp

144335033
304-065-501-0: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-527-1201
Loop Clamp

145271201
620-858-555-0: RNCC: 3 | RNVC: 2

3 Oct 2001

5340-14-471-2507
Angle Bracket

144712507
121B76-701-08-0: RNCC: 3 | RNVC: 2

10 Aug 1994

5340-14-549-1291
Mounting Plate

145491291
21252019-00: RNCC: 3 | RNVC: 2
21252019-5: RNCC: 5 | RNVC: 2

2 Mar 2006

5340-14-288-6505
Control Rod

142886505
ST406M73G15: RNCC: 3 | RNVC: 2
ST406M73-0015: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-446-0850
Detent Plunger

144460850
61-75-166-2: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-303-5046
Retaining Strap

143035046
NO PRIMARY REF14-303-5046: RNCC: 3 | RNVC: 2
48-23-30-245: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-448-9911
Access Cover

144489911
BAZ0822: RNCC: 3 | RNVC: 2
30-0866: RNCC: 5 | RNVC: 2

24 Jul 1991

Load More Results