What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 51 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 51 of 446

5340-14-423-8194
Loop Clamp

144238194
620-858-594-0: RNCC: 3 | RNVC: 2

28 Apr 1988

5340-14-445-8008
Buckle

144458008
218014-0: RNCC: 3 | RNVC: 2
1326-2C: RNCC: 5 | RNVC: 2
326-2C: RNCC: 5 | RNVC: 2
85-693-9276: RNCC: 6 | RNVC: 9

26 Feb 1991

5340-14-370-0937
Tubular Fairlead

143700937
FMATM25-01F40: RNCC: 3 | RNVC: 2
F-MAT-M25-01F40: RNCC: 5 | RNVC: 2

18 May 1981

5340-14-549-9257
Angle Bracket

145499257
2092543: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-504-6336
Lock Bolt

145046336
F00189042: RNCC: 3 | RNVC: 2
F00189042: RNCC: 5 | RNVC: 9

25 Feb 1998

5340-14-043-1530
Rigid Caster

140431530
065U20-730244X: RNCC: 3 | RNVC: 2

10 Apr 1984

5340-14-464-1466
Mounting Bracket

144641466
39292863: RNCC: 3 | RNVC: 2
39292863: RNCC: 3 | RNVC: 9

15 Jul 1993

5340-14-487-5368
Synchro Clamp

144875368
RA1M287310453: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-266-2938
Retaining Strap

142662938
43405: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-463-7179
Support Hook

144637179
202527: RNCC: 3 | RNVC: 2
89170698: RNCC: 5 | RNVC: 2

23 Jun 1993

5340-14-208-0349
Loop Clamp

142080349
6519: RNCC: 3 | RNVC: 9
305336: RNCC: 5 | RNVC: 2
6519: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-523-2810
Angle Bracket

145232810
RA1M701346450A1: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-382-4211
Retaining Strap

143824211
224943: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-300-0367
Retaining Strap

143000367
154329: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-550-9986
Mounting Bracket

145509986
567391: RNCC: 3 | RNVC: 2

18 Aug 2006

5340-14-391-5425
Retaining Strap

143915425
0000158040: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-404-5374
Angle Bracket

144045374
40011708: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-357-0355
Retaining Strap

143570355
310980: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-541-7955
Retaining Band

145417955
E66504800002: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-523-2533
Pipe Hanger

145232533
RA1M702336353: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-551-7490
Mounting Bracket

145517490
RA1N703796187N1: RNCC: 3 | RNVC: 2

19 Oct 2006

5340-14-282-0183
Mending Plate

142820183
6333735: RNCC: 3 | RNVC: 2
6333735: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-552-8204
Mounting Bracket

145528204
S215A4013211: RNCC: 3 | RNVC: 2

5 Feb 2007

5340-14-254-2533
Access Cover

142542533
1-039-103: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-477-6734
Control Rod

144776734
2413219014: RNCC: 3 | RNVC: 2
2413219014: RNCC: 5 | RNVC: 2

18 Sep 1995

5340-14-283-6711
Loop Clamp

142836711
53955-1: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-507-4656
Flush Catch

145074656
F10A841002150B1: RNCC: 3 | RNVC: 2

9 Jul 1998

5340-14-522-2978
Cushioning Pad

145222978
27159273-0: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-14-276-7093
Pipe Hanger

142767093
273402: RNCC: 3 | RNVC: 2
273402: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-542-8023
Rod End Connector

145428023
T322G1002127: RNCC: 3 | RNVC: 2

14 Aug 2004

5340-14-518-9707
Detent Plunger

145189707
706501: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-286-2524
Access Cover

142862524
2-10689: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-434-1889
Webbing Strap

144341889
564481: RNCC: 3 | RNVC: 2

12 Sep 1989

5340-14-406-1030
Access Cover

144061030
1105834600: RNCC: 3 | RNVC: 2
58346: RNCC: 5 | RNVC: 2

8 Jan 1986

5340-14-288-4158
Access Cover

142884158
0134500100: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-543-0653
Mounting Plate

145430653
S623A2137202: RNCC: 3 | RNVC: 2

18 Aug 2004

5340-14-403-4987
Access Cover

144034987
22446407: RNCC: 3 | RNVC: 2
22446407: RNCC: 5 | RNVC: 9

21 Aug 1985

5340-14-506-8935
Loop Clamp

145068935
DG11: RNCC: 3 | RNVC: 2
16009: RNCC: 5 | RNVC: 2

27 May 1998

5340-14-366-9012
Rigid Caster

143669012
73336: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-405-3437
Bow Handle

144053437
313121: RNCC: 3 | RNVC: 2
8080100: RNCC: 5 | RNVC: 2

27 Nov 1985

5340-14-551-3461
Angle Bracket

145513461
RA1M701756461: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-520-9068
Access Cover

145209068
10487474: RNCC: 3 | RNVC: 2

21 Jun 2000

5340-14-305-2801
Mending Plate

143052801
26253252: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-401-2118
Synchro Clamp

144012118
200072732: RNCC: 3 | RNVC: 2

29 May 1985

5340-14-533-1572
Mounting Bracket

145331572
S261A1021802: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-14-549-1831
Mounting Bracket

145491831
61026651AA: RNCC: 3 | RNVC: 2

7 Mar 2006

5340-14-406-1638
Plug Button

144061638
7703074098: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-467-0290
Angle Bracket

144670290
008642222M: RNCC: 3 | RNVC: 2

16 Dec 1993

5340-14-232-9267
Loop Clamp

142329267
201900950: RNCC: 3 | RNVC: 2
20P9-5: RNCC: 5 | RNVC: 2
9562810270: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-523-7165
Bow Handle

145237165
T1652038: RNCC: 3 | RNVC: 2
32456: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-383-5039
Angle Bracket

143835039
20070804: RNCC: 3 | RNVC: 2
20070804: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-441-0590
Mounting Plate

144410590
270308: RNCC: 3 | RNVC: 2

20 Aug 1990

5340-14-510-7360
Surface Bolt

145107360
2001: RNCC: 3 | RNVC: 2

10 Nov 1998

5340-14-480-2267
Mounting Bracket

144802267
0870288Q00: RNCC: 3 | RNVC: 2

28 Feb 1996

5340-14-526-4387
Bow Handle

145264387
RA1M239650411A1: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-414-4075
Retaining Strap

144144075
DA1D202700039A1: RNCC: 3 | RNVC: 2

28 Jan 1987

5340-14-554-9438
Loop Clamp

145549438
78651RH24CF: RNCC: 1 | RNVC: 2
78651RH24CF: RNCC: 3 | RNVC: 2

11 Sep 2007

5340-14-424-2878
Angle Bracket

144242878
0185700080: RNCC: 3 | RNVC: 2
89414744: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-041-3305
Loop Clamp

140413305
16347278: RNCC: 3 | RNVC: 2
16347278: RNCC: 5 | RNVC: 2
16347278: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-515-4219
Loop Clamp

145154219
41612017A: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-452-1331
Mounting Plate

144521331
39360200: RNCC: 3 | RNVC: 9

18 Dec 1991

5340-14-423-6569
Angle Bracket

144236569
543679: RNCC: 3 | RNVC: 2

21 Apr 1988

5340-14-367-2158
Retaining Band

143672158
A61566: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-464-8367
Butt Hinge

144648367
7106SP: RNCC: 3 | RNVC: 2
1034908W00: RNCC: 5 | RNVC: 2

1 Sep 1993

5340-14-216-6868
Retaining Strap

142166868
0725721000: RNCC: 3 | RNVC: 2
0725721000: RNCC: 3 | RNVC: 2
725721: RNCC: 5 | RNVC: 2
0072572100: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-434-2950
Mounting Plate

144342950
550680: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-508-7477
Bow Handle

145087477
19206118: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-14-489-0873
Mounting Plate

144890873
1083733P00: RNCC: 3 | RNVC: 2

24 Jun 1997

5340-14-554-3315
Mounting Bracket

145543315
82108350000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-483-5226
Mounting Plate

144835226
1097656K00: RNCC: 3 | RNVC: 2

18 Sep 1996

5340-14-432-1341
Pipe Hanger

144321341
160G742002-02: RNCC: 3 | RNVC: 2

24 May 1989

5340-14-214-3768
Loop Clamp

142143768
51123105013: RNCC: 3 | RNVC: 2
8920926017: RNCC: 5 | RNVC: 2
253191300: RNCC: 5 | RNVC: 2
24GE13: RNCC: 5 | RNVC: 9
25GE13: RNCC: 5 | RNVC: 9
A0021-25GE13: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-543-0283
Butt Hinge

145430283
EA1M881-30-11: RNCC: 3 | RNVC: 2

18 Aug 2004

5340-14-551-7566
Section Block Clamp

145517566
RA1A704136073: RNCC: 3 | RNVC: 2

20 Oct 2006

5340-14-447-2994
Mounting Bracket

144472994
F00099935: RNCC: 3 | RNVC: 2
F00099935: RNCC: 5 | RNVC: 9

15 May 1991

5340-14-484-2533
Pipe Hanger

144842533
501-729-730-0: RNCC: 3 | RNVC: 2

31 Oct 1996

5340-14-452-1190
Snap Hook

144521190
408DINOX: RNCC: 3 | RNVC: 2
91713535: RNCC: 5 | RNVC: 2

18 Dec 1991

5340-14-493-6470
Loop Holder

144936470
J05085-02-0320P001: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-404-3455
Mounting Plate

144043455
P600238-0: RNCC: 3 | RNVC: 2

30 Oct 1985

5340-14-551-3393
Retaining Strap

145513393
RA1M701326310A1N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-455-1519
Mounting Plate

144551519
P050295A: RNCC: 3 | RNVC: 2
85-694-6408: RNCC: 6 | RNVC: 9

1 May 1992

5340-14-536-2160
Mounting Bracket

145362160
RA1M216900311N1: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-14-532-0685
Mounting Bracket

145320685
SZ03.725.333: RNCC: 3 | RNVC: 2
03-725-333: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-333-5035
Synchro Clamp

143335035
GSM175-05F9: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-554-8651
Utility Access Door

145548651
GE09-2: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-530-6857
Cover Strip

145306857
T524A2001533: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-481-8488
Mounting Bracket

144818488
DS1P201712300: RNCC: 3 | RNVC: 2

4 Jun 1996

5340-14-346-8557
Angle Bracket

143468557
5403599X: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-14-339-4928
Retaining Strap

143394928
M3E702-14-03: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-373-6547
Retaining Strap

143736547
BAZ96970: RNCC: 3 | RNVC: 2

13 Nov 1981

5340-14-346-9411
Loop Clamp

143469411
341A84-1069-00: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-14-489-4293
Mounting Bracket

144894293
46062178: RNCC: 3 | RNVC: 2
46062178: RNCC: 5 | RNVC: 9

22 Jul 1997

5340-14-450-4857
Plate Spacer

144504857
TH20J2199-6: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-14-535-2631
Angle Bracket

145352631
RA1M702436291N1: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-519-2490
Mounting Plate

145192490
208925: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-418-4732
Webbing Strap

144184732
4-455612: RNCC: 3 | RNVC: 9
4-455612: RNCC: 5 | RNVC: 2
4-455612: RNCC: 5 | RNVC: 9

26 Aug 1987

5340-14-497-3600
Mounting Bracket

144973600
4769810050: RNCC: 3 | RNVC: 2
F300 0T 023 0555: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-215-8657
Bumper

142158657
367162: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-418-5620
Angle Bracket

144185620
132505: RNCC: 3 | RNVC: 2

2 Sep 1987

5340-14-514-0523
Section Block Clamp

145140523
RA1M703754133: RNCC: 3 | RNVC: 2

22 Apr 1999

5340-14-492-5759
Flush Catch Claw

144925759
5010003234: RNCC: 3 | RNVC: 2
F300 0T 008 0601: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-478-8214
Access Cover

144788214
138TV142A: RNCC: 3 | RNVC: 2
96074-1: RNCC: 5 | RNVC: 2

22 Nov 1995

5340-14-519-1133
Mounting Plate

145191133
8021929T00: RNCC: 3 | RNVC: 2

8 Mar 2000

5340-14-384-7844
Mounting Plate

143847844
16761995: RNCC: 3 | RNVC: 2
16761995: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-516-3638
Mounting Bracket

145163638
CV17727: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-404-6441
Angle Bracket

144046441
20175297: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-041-2381
Retaining Bail

140412381
06605: RNCC: 3 | RNVC: 2
06605: RNCC: 5 | RNVC: 9
EAAU10X96: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-348-0712
Loop Clamp

143480712
514131190095: RNCC: 3 | RNVC: 2
38GT9: RNCC: 5 | RNVC: 2

29 Mar 1978

5340-14-494-2067
Mounting Plate

144942067
29365355: RNCC: 3 | RNVC: 2
29365355: RNCC: 3 | RNVC: 9
F300 0T 016 1266: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-539-7706
Mounting Bracket

145397706
10668684000: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-14-392-8921
Runner

143928921
606048011: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-305-4827
Loop Clamp

143054827
0260608530: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-479-1229
Mounting Bracket

144791229
641427: RNCC: 3 | RNVC: 2
641427: RNCC: 5 | RNVC: 9

13 Dec 1995

5340-14-273-6568
Pipe Hanger

142736568
78583-92: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-295-2153
Loop Clamp

142952153
H6V: RNCC: 3 | RNVC: 2
99008509: RNCC: 5 | RNVC: 2
99008509: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-545-6993
Mounting Bracket

145456993
RA1A703846171N1: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-488-1280
Utility Access Door

144881280
10269919: RNCC: 3 | RNVC: 2

18 Apr 1997

5340-14-418-1117
Loop Clamp

144181117
BGE400922P: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-265-6979
Angle Bracket

142656979
40644: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-417-0168
Retaining Strap

144170168
15170217: RNCC: 3 | RNVC: 2
15170217: RNCC: 5 | RNVC: 9

25 Jun 1987

5340-14-206-6495
Rod End Clevis

142066495
0000048872: RNCC: 3 | RNVC: 2
0000048872: RNCC: 5 | RNVC: 9
48872: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-474-2910
Access Door Hinge

144742910
AT004PD005127: RNCC: 3 | RNVC: 9

8 Feb 1995

5340-14-471-5161
Access Cover

144715161
7519516: RNCC: 3 | RNVC: 2
5010059203: RNCC: 5 | RNVC: 2
0C07519516: RNCC: 5 | RNVC: 2

31 Aug 1994

5340-14-207-0405
Access Cover

142070405
0000351362: RNCC: 3 | RNVC: 2
351362: RNCC: 5 | RNVC: 9
0000351362: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-305-4561
Retaining Strap

143054561
1050540027: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-265-6564
Mending Plate

142656564
1045002: RNCC: 3 | RNVC: 2
1045002: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-422-1918
Anchor Strap

144221918
121407: RNCC: 3 | RNVC: 2

24 Feb 1988

5340-14-399-8869
Mending Plate

143998869
987044: RNCC: 3 | RNVC: 2
987044: RNCC: 5 | RNVC: 9

11 Apr 1985

5340-14-515-9810
Mounting Bracket

145159810
009723041P: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-14-498-6080
Mounting Bracket

144986080
059618Z01TRA: RNCC: 3 | RNVC: 2
059618Z: RNCC: 5 | RNVC: 2
F300 0T 006 5979: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-517-5796
Angle Bracket

145175796
RA1M701202210A1: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-432-5340
Retaining Strap

144325340
DA2C203900801: RNCC: 3 | RNVC: 2

14 Jun 1989

5340-14-379-7156
Loop Clamp

143797156
225824: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-448-0345
Angle Bracket

144480345
PM1A233280092: RNCC: 3 | RNVC: 2
PM1A233280092: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-554-1734
Mounting Bracket

145541734
82054996001: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-505-3812
Runner

145053812
10214067: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-418-1252
Tubular Fairlead

144181252
059954Z01TRA: RNCC: 3 | RNVC: 2
059954Z: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-524-1752
Detent Plunger

145241752
2242401: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-242-8812
Retaining Strap

142428812
365706: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-546-8239
Protection Bellows

145468239
710724: RNCC: 3 | RNVC: 2

25 Aug 2005

5340-14-487-5597
Turnbuckle Body

144875597
43905DG1920D: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-464-8902
Loop Clamp

144648902
PE27010A4: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-383-5038
Angle Bracket

143835038
20070803: RNCC: 3 | RNVC: 2
20070803: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-325-9140
Key Blank

143259140
25511B14X22XC38: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-042-9174
Loop Clamp

140429174
51120605018: RNCC: 3 | RNVC: 2
240691800: RNCC: 5 | RNVC: 2
24FE18: RNCC: 5 | RNVC: 9

1 Sep 1981

5340-14-401-2652
Angle Bracket

144012652
611224: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-472-4530
Corner Brace

144724530
DHV1215: RNCC: 3 | RNVC: 2

26 Oct 1994

5340-14-332-9397
Retaining Strap

143329397
193376: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-471-3417
Strap End Clip

144713417
D690392: RNCC: 3 | RNVC: 2

24 Aug 1994

5340-14-550-8547
Loop Clamp

145508547
560.060.100: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-14-374-0438
Bumper

143740438
222911: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-553-9478
Pipe Hanger

145539478
D18118: RNCC: 3 | RNVC: 2

4 Jun 2007

5340-14-541-9101
Loop Clamp

145419101
SC086140: RNCC: 3 | RNVC: 2
42396A-16: RNCC: 5 | RNVC: 2
42396A-16: RNCC: 5 | RNVC: 2
42396A-16: RNCC: 5 | RNVC: 2

2 Jul 2004

5340-14-523-8807
Metal Grille

145238807
065071-017: RNCC: 3 | RNVC: 9

8 Feb 2001

5340-14-484-8178
Mounting Bracket

144848178
332P65-1238-27: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-316-5118
Rod End Clevis

143165118
321A08-0513-21: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-361-4271
Angle Bracket

143614271
NO PRIMARY REF14-361-4271: RNCC: 3 | RNVC: 2
F75BB0101-283: RNCC: 5 | RNVC: 9
85-689-9737: RNCC: 6 | RNVC: 9

24 Jan 1980

5340-14-223-2717
Rod End Clevis

142232717
A10-29-040-03-0: RNCC: 3 | RNVC: 2
A10-29-040-03-0: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-364-0016
Hook Handle

143640016
121A81-300-15-0: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-230-7055
Handwheel

142307055
GSM137-001F18DET8AVECB0ULEAS10G: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-389-4607
Angle Bracket

143894607
365A57-3174-21: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-507-3570
Access Cover

145073570
4211 10 1084-2: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-14-298-1903
Mending Plate

142981903
23030367: RNCC: 3 | RNVC: 2
23030367-3: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-323-7406
Retaining Strap

143237406
050A57-520753B: RNCC: 3 | RNVC: 2
0520753B00: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-568-7729
Utility Resilient Mount

145687729
E1N-3628-52: RNCC: 3 | RNVC: 2

5 Jul 2011

5340-14-307-4942
Retaining Strap

143074942
E4M701-28-882: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-313-1705
Loop Clamp

143131705
17121303: RNCC: 3 | RNVC: 2
17121303: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-481-3657
Mounting Bracket

144813657
10030296: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-518-6046
Mounting Bracket

145186046
5010094697: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-545-2218
Mounting Bracket

145452218
T943A2001136: RNCC: 3 | RNVC: 2

24 Mar 2005

5340-14-522-7681
Mounting Plate

145227681
47220324: RNCC: 3 | RNVC: 2

22 Nov 2000

5340-14-390-1407
Protection Bellows

143901407
366A27-3119-20: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-548-0988
Mounting Bracket

145480988
RA1M701926381N1: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-511-1756
Support Hook

145111756
TL110-5-13: RNCC: 3 | RNVC: 2
1132179K00: RNCC: 5 | RNVC: 2

9 Dec 1998

5340-14-446-1284
Eye Hook

144461284
75276: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-298-9355
Belt-Strap Keeper

142989355
NO PRIMARY REF14-298-9355: RNCC: 3 | RNVC: 2
4-4: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-246-7670
Loop Clamp

142467670
J13690-4: RNCC: 3 | RNVC: 2
J01369-04: RNCC: 5 | RNVC: 2
HD1300-3: RNCC: 5 | RNVC: 9
F300 0T 019 5158: RNCC: 6 | RNVC: 9

1 Jan 1968

5340-14-518-8101
Mounting Bracket

145188101
DL10-1-36: RNCC: 3 | RNVC: 2

21 Feb 2000

5340-14-476-4711
Rod End Connector

144764711
139E375-00: RNCC: 3 | RNVC: 2
139E375-00: RNCC: 5 | RNVC: 9

14 Jun 1995

5340-14-525-1769
Bow Handle

145251769
4-0224-01: RNCC: 3 | RNVC: 2
06150P003002: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-413-5245
Loop Clamp

144135245
501-804-653-0: RNCC: 3 | RNVC: 2

17 Dec 1986

5340-14-377-0637
Retaining Strap

143770637
C58000-293: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-404-0962
Loop Clamp

144040962
501-211-110-0: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-369-2368
Retaining Strap

143692368
650-403-053-0: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-331-7719
Angle Bracket

143317719
501-709-245-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-384-0571
Loop Clamp

143840571
PE27017-6: RNCC: 3 | RNVC: 2
85-692-0382: RNCC: 6 | RNVC: 9

4 May 1983

5340-14-445-9813
Mounting Plate

144459813
2-521037-5: RNCC: 3 | RNVC: 2
2-521037-5: RNCC: 5 | RNVC: 9

27 Feb 1991

5340-14-311-3191
Rod End Connector

143113191
7-093-043: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-527-1229
Loop Clamp

145271229
MR12: RNCC: 3 | RNVC: 2
620-858-577-0: RNCC: 5 | RNVC: 2

3 Oct 2001

5340-14-505-2636
Mounting Plate

145052636
4-062-2-10201-01: RNCC: 3 | RNVC: 2

17 Mar 1998

5340-14-450-5633
Swivel Caster

144505633
72256: RNCC: 3 | RNVC: 9
85-693-5410: RNCC: 6 | RNVC: 9

9 Oct 1991

5340-14-268-1656
Angle Bracket

142681656
0077590020: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-519-4750
Mounting Plate

145194750
262370940: RNCC: 3 | RNVC: 2
542564: RNCC: 5 | RNVC: 2

22 Mar 2000

5340-14-543-9757
Mounting Plate

145439757
10670753000: RNCC: 3 | RNVC: 2

19 Dec 2004

5340-14-531-2539
Webbing Strap

145312539
8920324: RNCC: 3 | RNVC: 2

6 Aug 2002

5340-14-529-8569
Mounting Plate

145298569
ANGLE93833A00: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-551-2834
Section Block Clamp

145512834
RA1M312319149: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-513-8738
Retaining Strap

145138738
648181: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-563-2164
Utility Resilient Mount

145632164
ACH 160-04 FF: RNCC: 3 | RNVC: 2

14 Jan 2010

5340-14-465-1732
Blank Panel

144651732
365A72-1219-20: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-549-8485
Mounting Bracket

145498485
11105971: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-485-3007
Cover Strip

144853007
RA1M721325723U1: RNCC: 3 | RNVC: 2

15 Jan 1997

5340-14-335-4826
Angle Bracket

143354826
CR2087: RNCC: 3 | RNVC: 9

30 Jun 1976

5340-14-497-9014
Mounting Bracket

144979014
0315777330: RNCC: 3 | RNVC: 2

22 Oct 1997

5340-14-309-8213
Retaining Strap

143098213
15913355: RNCC: 3 | RNVC: 2
15913355: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-540-4925
Retaining Clip

145404925
A68013: RNCC: 3 | RNVC: 2

1 Apr 2004

5340-14-530-1219
Mounting Bracket

145301219
TB3020108F820: RNCC: 3 | RNVC: 2

14 May 2002

5340-14-274-3266
Loop Clamp

142743266
12509224: RNCC: 3 | RNVC: 2
12509224: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-372-6918
Access Cover

143726918
24632-56: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-540-5297
Mounting Bracket

145405297
19214131: RNCC: 3 | RNVC: 2

1 Apr 2004

5340-14-325-9122
Key Blank

143259122
25511B8X12XC38: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-539-3560
Runner

145393560
AL100044: RNCC: 3 | RNVC: 2

7 Jan 2004

5340-14-548-1515
Mounting Plate

145481515
10675314000: RNCC: 3 | RNVC: 2

13 Dec 2005

5340-14-285-4925
Angle Bracket

142854925
26247982: RNCC: 3 | RNVC: 2
C247982: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-393-5481
Access Cover

143935481
969315: RNCC: 3 | RNVC: 2
969315: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-14-549-0852
Angle Bracket

145490852
RA1M705335111A1N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-462-3508
Retaining Strap

144623508
M4HZ5001781101: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-14-369-9005
Mending Plate

143699005
133027U: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-351-9740
Strap Fastener Loop

143519740
PW: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-244-3538
Mounting Plate

142443538
2780: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-504-9501
Runner

145049501
01133300: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-400-0703
Retaining Strap

144000703
187608: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-469-6614
Angle Bracket

144696614
A11A221147071: RNCC: 3 | RNVC: 2

4 May 1994

5340-14-507-9753
Mounting Bracket

145079753
46234769: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-545-9516
Mounting Plate

145459516
27120027-0: RNCC: 3 | RNVC: 2

30 May 2005

5340-14-353-1162
Access Cover

143531162
RC55-2: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-345-8413
Access Cover

143458413
326760: RNCC: 3 | RNVC: 2
20326760-4: RNCC: 5 | RNVC: 2

5 Nov 1977

5340-14-435-2638
Angle Bracket

144352638
39065860: RNCC: 3 | RNVC: 2

2 Nov 1989

5340-14-501-1943
Access Cover

145011943
19187900-3: RNCC: 3 | RNVC: 2
F300 0T 025 2347: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-479-7129
Runner

144797129
23626188-2: RNCC: 3 | RNVC: 2

31 Jan 1996

5340-14-312-1182
Retaining Strap

143121182
169404: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-273-2625
Suction Cup

142732625
1310-6-163: RNCC: 3 | RNVC: 2
1310-6-163: RNCC: 5 | RNVC: 2
1310-6-163: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-366-1550
Rod End Clevis

143661550
NO PRIMARY REF14-366-1550: RNCC: 3 | RNVC: 2
L121AA31: RNCC: 5 | RNVC: 9

4 Nov 1980

5340-14-224-4249
Angle Bracket

142244249
2-03829: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-524-0561
Surface Bolt

145240561
12-1-3862: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-14-462-6182
Mounting Plate

144626182
2089-10042: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-14-361-6339
Pipe Hanger

143616339
000080: RNCC: 3 | RNVC: 2
53901-5: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-533-8889
Metal Grille

145338889
12-104-00: RNCC: 3 | RNVC: 2
12.104.00: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-425-4901
Control Rod

144254901
0020124337A100: RNCC: 3 | RNVC: 2
2-100-124: RNCC: 3 | RNVC: 9

7 Jul 1988

5340-14-333-5112
Runner

143335112
A519-70: RNCC: 3 | RNVC: 2

8 Feb 2001

5340-14-289-6271
Angle Bracket

142896271
121E27-328-07-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-277-9595
Bail Handle

142779595
73-51ACCD: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-542-3638
Mounting Bracket

145423638
27559206-2: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-14-510-2807
Mounting Bracket

145102807
FC85-007-4: RNCC: 3 | RNVC: 2
1560AA8018479: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-425-4504
Angle Bracket

144254504
27118121-9: RNCC: 3 | RNVC: 2

5 Jul 1988

5340-14-465-5084
Mounting Bracket

144655084
365A87-3160-03: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-506-7336
Retaining Bail

145067336
BB4061-2: RNCC: 3 | RNVC: 2

13 May 1998

5340-14-410-5893
Angle Bracket

144105893
1909-34-01: RNCC: 3 | RNVC: 9

9 Jul 1986

5340-14-492-5756
Pawl Fastener

144925756
5010003231: RNCC: 3 | RNVC: 2
F300 0T 008 0598: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-456-8724
Arched Cushion

144568724
MAT169-0012F20DE16: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-14-534-5631
Retaining Strap

145345631
F700-044: RNCC: 3 | RNVC: 2

26 Mar 2003

5340-14-343-6896
Buckle

143436896
34209-150-018: RNCC: 3 | RNVC: 2

13 Jul 1977

5340-14-277-8588
Cover Strip

142778588
3160S25-21-018-51: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-541-9605
Bow Handle

145419605
14269-001: RNCC: 3 | RNVC: 2
502107002010A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-406-4650
Rod End Clevis

144064650
FD3C291-40-47: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-515-9265
Loop Clamp

145159265
821N16: RNCC: 3 | RNVC: 2

26 Aug 1999

5340-14-305-7935
Access Cover

143057935
NO PRIMARY REF14-305-7935: RNCC: 3 | RNVC: 2
16E2020DET22: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-549-8654
Rod End Clevis

145498654
2092490-001: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-456-5317
Runner

144565317
91ABC12-07: RNCC: 3 | RNVC: 2
RAR3504: RNCC: 5 | RNVC: 2

8 Jul 1992

5340-14-421-7192
Retaining Strap

144217192
8452-114: RNCC: 3 | RNVC: 2
002407320A: RNCC: 5 | RNVC: 2

27 Jan 1988

5340-14-436-3160
Mounting Bracket

144363160
30201-10130: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-14-399-8556
Retaining Strap

143998556
RA6: RNCC: 3 | RNVC: 2
1064006G00: RNCC: 5 | RNVC: 2
151-13019: RNCC: 5 | RNVC: 2

1 Apr 1985

5340-14-484-8233
Runner

144848233
332P69-3506-26: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-366-8680
Angle Bracket

143668680
330A22-2055-86: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-416-1949
Mounting Plate

144161949
M635-100103: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-462-0908
Dashpot Piston

144620908
J05403-02-0700P024: RNCC: 3 | RNVC: 2
253-5M363P38B: RNCC: 3 | RNVC: 9
PA253-5M363P38B: RNCC: 5 | RNVC: 9

31 Mar 1993

5340-14-296-1226
Angle Bracket

142961226
341A22-1078-21: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-427-5074
Shelf Bracket

144275074
NO PRIMARY REF14-427-5074: RNCC: 3 | RNVC: 2
03745: RNCC: 5 | RNVC: 9

20 Oct 1988

5340-14-534-7631
Mounting Bracket

145347631
332A61-4786-0001: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-461-2600
Mounting Bracket

144612600
SHS1G0102A: RNCC: 3 | RNVC: 2

3 Mar 1993

5340-14-555-7897
Mounting Plate

145557897
0292104440: RNCC: 3 | RNVC: 2

14 Dec 2007

5340-14-514-0656
Angle Bracket

145140656
RA1M704335880: RNCC: 3 | RNVC: 2

22 Apr 1999

5340-14-507-9048
Butt Hinge

145079048
13 147809 00: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-460-3222
Bumper

144603222
TNS1A3803A: RNCC: 3 | RNVC: 2

21 Jan 1993

5340-14-272-8518
Retaining Strap

142728518
12509975: RNCC: 3 | RNVC: 2
12509975: RNCC: 3 | RNVC: 9

1 Jan 1971

5340-14-383-2005
Control Rod

143832005
0PHD20-648906Y: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-523-3925
Access Cover

145233925
4CLN1231+2: RNCC: 3 | RNVC: 2

17 Jan 2001

5340-14-435-5319
Mounting Plate

144355319
AL7709-1: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-551-7043
Mounting Plate

145517043
2CW1902-1: RNCC: 3 | RNVC: 2

17 Oct 2006

5340-14-530-6825
Pad Eye

145306825
T890A00X0025: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-418-5621
Angle Bracket

144185621
3511 998 30081: RNCC: 3 | RNVC: 2
15306-4: RNCC: 5 | RNVC: 9

2 Sep 1987

5340-14-417-4512
Rod End Connector

144174512
PDP0561: RNCC: 3 | RNVC: 2

8 Jul 1987

5340-14-545-9030
Access Cover

145459030
22355651-3: RNCC: 3 | RNVC: 2

26 May 2005

5340-14-453-4205
Plug Button

144534205
1012230-1/3REP-C: RNCC: 3 | RNVC: 2
1012230-1/3REP-C: RNCC: 5 | RNVC: 2

19 Feb 1992

5340-14-397-2830
Angle Bracket

143972830
79099291: RNCC: 3 | RNVC: 2
79099291: RNCC: 5 | RNVC: 9

1 Dec 1984

5340-14-448-2483
Mounting Bracket

144482483
27110046-2: RNCC: 3 | RNVC: 2

18 Jun 1991

5340-14-527-1861
Mounting Bracket

145271861
10503254: RNCC: 3 | RNVC: 2

10 Oct 2001

5340-14-254-2532
Access Cover

142542532
1-039-102: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-547-8863
Bail Handle

145478863
19-7-3717: RNCC: 3 | RNVC: 2

22 Nov 2005

5340-14-519-9157
Loop Clamp

145199157
11215305012: RNCC: 3 | RNVC: 2
8024646T00: RNCC: 5 | RNVC: 2

19 Apr 2000

5340-14-550-9055
Angle Bracket

145509055
RA1M701242011N1: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-530-0298
Angle Bracket

145300298
487546-1: RNCC: 3 | RNVC: 2

30 Apr 2002

5340-14-438-0514
Block Clamp

144380514
M3R701-13-02: RNCC: 3 | RNVC: 2
2925AA1082050: RNCC: 6 | RNVC: 9

7 Mar 1990

5340-14-349-4249
Loop Clamp

143494249
M3D882-42-13RN1: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-422-0969
Synchro Clamp

144220969
24061-11902: RNCC: 3 | RNVC: 2

23 Feb 1988

5340-14-465-3012
Angle Bracket

144653012
365P66-1131-2451: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-543-2344
Mounting Bracket

145432344
128-20-638-01: RNCC: 3 | RNVC: 2

7 Oct 2004

5340-14-382-0598
Pipe Hanger

143820598
321A75-0152-24: RNCC: 3 | RNVC: 2
85-691-9481: RNCC: 6 | RNVC: 9

25 Jan 1983

5340-14-452-1834
Bail Handle

144521834
801022: RNCC: 3 | RNVC: 2
259-066: RNCC: 5 | RNVC: 2

23 Dec 1991

5340-14-531-8281
Mounting Bracket

145318281
341A66-6129-00: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-348-5599
Cover Strip

143485599
330A58-1300-67: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-404-2052
Mounting Plate

144042052
4888: RNCC: 3 | RNVC: 2
85-692-9150: RNCC: 6 | RNVC: 9

11 Sep 1985

5340-14-472-4040
Mounting Bracket

144724040
350A57-1473-20: RNCC: 3 | RNVC: 2

19 Oct 1994

5340-14-544-5481
Mounting Bracket

145445481
M589-22703-02-18: RNCC: 3 | RNVC: 2

9 Feb 2005

5340-14-463-0641
Loop Clamp

144630641
8395-0110: RNCC: 3 | RNVC: 2

17 May 1993

5340-14-031-8642
Access Cover

140318642
V010001A: RNCC: 3 | RNVC: 2
C36-23: RNCC: 5 | RNVC: 2
CY020-236: RNCC: 5 | RNVC: 2

5 Jul 1980

5340-14-381-5576
Retaining Strap

143815576
2705-17: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-485-4536
Mounting Plate

144854536
408841: RNCC: 3 | RNVC: 2
408841-001: RNCC: 5 | RNVC: 9

23 Jan 1997

5340-14-209-1074
Loop Clamp

142091074
ASNA0021-25G25: RNCC: 1 | RNVC: 2
51113105025: RNCC: 3 | RNVC: 2
033401: RNCC: 5 | RNVC: 2
25G25: RNCC: 5 | RNVC: 2
VDP5216: RNCC: 5 | RNVC: 2
A0021-25G25: RNCC: 5 | RNVC: 2
A0021-25G25: RNCC: 5 | RNVC: 2
2425G25: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-401-5919
Access Cover

144015919
050A69-686446S: RNCC: 3 | RNVC: 2
0686446S00: RNCC: 5 | RNVC: 2

13 Jun 1985

5340-14-437-9574
Handle Grip

144379574
330A87-1193-20: RNCC: 3 | RNVC: 2

28 Feb 1990

5340-14-497-7428
Mounting Bracket

144977428
A02400-02-0000P003: RNCC: 3 | RNVC: 2

15 Oct 1997

5340-14-506-4389
Access Cover

145064389
NO PRIMARY REF14-506-4389: RNCC: 3 | RNVC: 2
MNTS1A05340-0D0: RNCC: 5 | RNVC: 2

29 Apr 1998

5340-14-238-8562
Bumper

142388562
26355: RNCC: 3 | RNVC: 2
53402660751: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-354-2484
Access Cover

143542484
16047853: RNCC: 3 | RNVC: 2
16047853: RNCC: 5 | RNVC: 9

30 Jan 1979

5340-14-469-5731
Access Cover

144695731
4655870A: RNCC: 3 | RNVC: 2
1088217P00: RNCC: 5 | RNVC: 2

4 May 1994

5340-14-434-1938
Access Cover

144341938
564472: RNCC: 3 | RNVC: 2

12 Sep 1989

5340-14-507-9737
Access Cover

145079737
46234161: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-320-3641
Rod End Clevis

143203641
5000000166: RNCC: 3 | RNVC: 2
5000000166: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-202-4014
Rod End Clevis

142024014
0000275060: RNCC: 3 | RNVC: 2
0000275060: RNCC: 5 | RNVC: 9
275060: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-14-524-1874
Angle Bracket

145241874
030291: RNCC: 3 | RNVC: 2
30291: RNCC: 5 | RNVC: 2
3245060302917: RNCC: 5 | RNVC: 2

7 Mar 2001

5340-14-545-4449
Angle Bracket

145454449
RA1B701876611N1: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-463-7798
Handwheel

144637798
4260AN24REP127: RNCC: 3 | RNVC: 2
4260AN242: RNCC: 5 | RNVC: 2

30 Jun 1993

5340-14-548-0828
Mounting Bracket

145480828
5010525735: RNCC: 3 | RNVC: 2

9 Dec 2005

5340-14-501-6608
Anchor Strap

145016608
45283291: RNCC: 3 | RNVC: 2
45283291: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-545-2646
Mounting Bracket

145452646
S215A4012103: RNCC: 3 | RNVC: 2

30 Mar 2005

5340-14-526-9648
Mounting Bracket

145269648
10317565: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-512-5934
Metal Grille

145125934
201094: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-524-6433
Utility Access Door

145246433
MINI PARISIENNE 1800X1525: RNCC: 3 | RNVC: 2
MINIKAZED: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-14-298-4038
Loop Clamp

142984038
51131050281: RNCC: 3 | RNVC: 2
35G28: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-506-9214
Mounting Plate

145069214
30344350K: RNCC: 3 | RNVC: 2

27 May 1998

5340-14-533-9851
Mounting Bracket

145339851
401226: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-332-3259
Rod End Clevis

143323259
83046: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-462-9063
Access Cover

144629063
3DM160336: RNCC: 3 | RNVC: 2
91714373: RNCC: 5 | RNVC: 2

5 May 1993

5340-14-398-8056
Webbing Strap

143988056
5000501149: RNCC: 3 | RNVC: 2
5000501149: RNCC: 5 | RNVC: 9

20 Feb 1985

5340-14-266-9627
Leaf Spring

142669627
223291: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-460-7789
Belt-Strap Keeper

144607789
521F: RNCC: 3 | RNVC: 9

9 Feb 1993

5340-14-335-5649
Bail Handle

143355649
NO PRIMARY REF14-335-5649: RNCC: 3 | RNVC: 2
1041827: RNCC: 5 | RNVC: 9
A41827: RNCC: 5 | RNVC: 9
85-687-2973: RNCC: 6 | RNVC: 9

30 Jun 1976

5340-14-331-7192
Bumper

143317192
121S22-814-09-1M1: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-269-4360
Leaf Spring

142694360
NO PRIMARY REF14-269-4360: RNCC: 3 | RNVC: 2
253BT38F0UGA: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-519-9285
Bumper

145199285
714252: RNCC: 3 | RNVC: 2
8499-77: RNCC: 5 | RNVC: 9
9638909980: RNCC: 5 | RNVC: 9
990001017: RNCC: 5 | RNVC: 9

21 Apr 2000

5340-14-336-4285
Rod End Clevis

143364285
201-136CZ1: RNCC: 3 | RNVC: 2
201-136CZ-1: RNCC: 5 | RNVC: 2

24 Jul 1976

5340-14-345-2715
Loop Clamp

143452715
FD1B794-45: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-534-0914
Synchro Clamp

145340914
330A85-0173-35: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-510-1353
Access Cover

145101353
F292-38RS9: RNCC: 3 | RNVC: 2
1560AA8010465: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-482-9300
Pipe Hanger

144829300
78732-040-048B: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-315-0190
Rod End Clevis

143150190
773-410-076BFF11: RNCC: 3 | RNVC: 2
773-410-076BFF11: RNCC: 5 | RNVC: 9
DET12: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-529-5575
Mounting Bracket

145295575
330A63-1632-20: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-217-8988
Mounting Plate

142178988
3160S52-10-070: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-257-1583
Lock Bolt

142571583
330A58-4260-03: RNCC: 3 | RNVC: 2
330A58-4260-0300: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-312-5932
Rod End Clevis

143125932
3160S78-04-958: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-536-5477
Utility Access Door

145365477
CLB501-001-550A1: RNCC: 3 | RNVC: 2

29 Aug 2003

5340-14-471-0484
Plug Button

144710484
79216581: RNCC: 3 | RNVC: 2
79216-581: RNCC: 5 | RNVC: 9
79216581: RNCC: 5 | RNVC: 9

20 Jul 1994

5340-14-373-1689
Anchor Strap

143731689
7550635880: RNCC: 3 | RNVC: 2
7550635880: RNCC: 3 | RNVC: 2
5506358: RNCC: 5 | RNVC: 2
75506358-6: RNCC: 5 | RNVC: 2
AM133-86A: RNCC: 5 | RNVC: 2
75506538: RNCC: 5 | RNVC: 2

21 Oct 1981

5340-14-571-6963
Utility Resilient Mount

145716963
CB1400-40CM2: RNCC: 3 | RNVC: 2

24 Apr 2012

5340-14-394-1537
Butt Hinge

143941537
J36190-30X20LAIT0NCHR0ME: RNCC: 2 | RNVC: 2
40BL30X20LAIT0NCHR0ME: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-393-7908
Bumper

143937908
PN165-150: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-305-1511
Bow Handle

143051511
NO PRIMARY REF14-305-1511: RNCC: 3 | RNVC: 2
175L33: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-472-8724
Angle Bracket

144728724
332A23-0636-20: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-436-6589
Retaining Strap

144366589
DA2C203118410: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-494-4952
Mounting Bracket

144944952
VL0 530 0020: RNCC: 3 | RNVC: 2
F300 0T 017 4007: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-417-3148
Mending Plate

144173148
20062168: RNCC: 3 | RNVC: 2
20062168: RNCC: 5 | RNVC: 9

1 Jul 1987

5340-14-465-1808
Bow Handle

144651808
365P68-1510-26: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-427-5727
Pipe Hanger

144275727
304-034-202-0: RNCC: 3 | RNVC: 2

20 Oct 1988

5340-14-411-4376
Wiring Harness

144114376
A11A822210120A1: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-312-9643
Mending Plate

143129643
NO PRIMARY REF14-312-9643: RNCC: 3 | RNVC: 2
TB1904PLAQUEJARRETIERB0IS: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-373-1688
Anchor Strap

143731688
7550635780: RNCC: 3 | RNVC: 2
7550635780: RNCC: 3 | RNVC: 2
75506357: RNCC: 5 | RNVC: 2
75506357-6: RNCC: 5 | RNVC: 2
AM133-86: RNCC: 5 | RNVC: 2
5506357: RNCC: 5 | RNVC: 2

21 Oct 1981

5340-14-217-3464
Rod End Clevis

142173464
3160S73-64-164: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-465-7722
Pipe Hanger

144657722
063184-941-921: RNCC: 3 | RNVC: 9
Z00.N7788745280: RNCC: 5 | RNVC: 2
63184: RNCC: 5 | RNVC: 9

14 Oct 1993

5340-14-418-1088
Runner

144181088
NO PRIMARY REF14-418-1088: RNCC: 3 | RNVC: 2
4255-3: RNCC: 5 | RNVC: 9

6 Aug 1987

5340-14-370-8718
Pipe Hanger

143708718
303-932-802-0: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-330-3421
Angle Bracket

143303421
AY142-395B: RNCC: 3 | RNVC: 2
75529037: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-517-8371
Shelf Bracket

145178371
452-65242-304-20: RNCC: 3 | RNVC: 2

13 Jan 2000

5340-14-450-1347
Bow Handle

144501347
320-575-301-0: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-218-7463
Retaining Strap

142187463
NO PRIMARY REF14-218-7463: RNCC: 3 | RNVC: 2
DC2866: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-435-7034
Mounting Plate

144357034
18443: RNCC: 3 | RNVC: 2
184-43-79601: RNCC: 5 | RNVC: 2

20 Nov 1989

5340-14-413-1196
Bumper

144131196
P657-04: RNCC: 3 | RNVC: 2
P65704: RNCC: 5 | RNVC: 2

26 Nov 1986

5340-14-212-7903
Angle Bracket

142127903
4320-043: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-500-3799
Butt Hinge

145003799
72-7-3413: RNCC: 3 | RNVC: 2
F300 0T 024 3900: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-357-7970
Runner

143577970
AZ841-100: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-14-366-5841
Plug Button

143665841
055E03-565043C: RNCC: 3 | RNVC: 2
0565043C00: RNCC: 5 | RNVC: 2

20 Nov 1980

5340-14-377-8148
Butt Hinge

143778148
6007-110DR0ITEACIER: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-295-7438
Bumper

142957438
216877: RNCC: 3 | RNVC: 2
216877: RNCC: 5 | RNVC: 9
85-679-7990: RNCC: 6 | RNVC: 9

1 Jan 1973

5340-14-389-5474
Angle Bracket

143895474
365A87-3034-69: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-543-9915
Mounting Plate

145439915
61476272AA: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-14-539-2598
Mounting Bracket

145392598
T623G6003121: RNCC: 3 | RNVC: 2

17 Dec 2003

5340-14-384-1417
Suction Cup

143841417
230-14R: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-544-5541
Mounting Bracket

145445541
07025: RNCC: 3 | RNVC: 2
AA003724: RNCC: 6 | RNVC: 9

10 Feb 2005

5340-14-425-7488
Block Clamp

144257488
91432B32-32B94: RNCC: 3 | RNVC: 2

21 Jul 1988

5340-14-220-1389
Cover Strip

142201389
3160S25-22-017: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-498-4535
Mounting Bracket

144984535
91966320: RNCC: 3 | RNVC: 2
ICNJ23-18-024: RNCC: 5 | RNVC: 2
F300 0T 005 1445: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-258-7496
Quick Release Pin

142587496
NO PRIMARY REF14-258-7496: RNCC: 3 | RNVC: 2
4-05-001-00: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-513-5553
Mounting Bracket

145135553
1031-75-01-1-01: RNCC: 3 | RNVC: 2

24 Mar 1999

5340-14-544-0530
Mounting Plate

145440530
AMPC ENER E227328: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-14-258-8337
Loop Clamp

142588337
11312S: RNCC: 3 | RNVC: 9
1002002: RNCC: 5 | RNVC: 9
1002002P: RNCC: 5 | RNVC: 9
1003002: RNCC: 5 | RNVC: 9
1003002P: RNCC: 5 | RNVC: 9
11312: RNCC: 5 | RNVC: 9
1701A: RNCC: 5 | RNVC: 9
1701AS: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-475-5055
Mounting Bracket

144755055
08-60-0040: RNCC: 3 | RNVC: 2
TB1030101-00SPF015: RNCC: 5 | RNVC: 2

12 Apr 1995

5340-14-532-6608
Mounting Bracket

145326608
79004-62: RNCC: 3 | RNVC: 2

27 Nov 2002

5340-14-553-4883
Mounting Bracket

145534883
0319717470: RNCC: 3 | RNVC: 2

5 Apr 2007

5340-14-371-2784
Retaining Strap

143712784
T20-13C132: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-440-7930
Clamping Catch

144407930
20856989: RNCC: 3 | RNVC: 2
20856989: RNCC: 5 | RNVC: 9
GE70-15101IV: RNCC: 5 | RNVC: 9

25 Jul 1990

5340-14-325-7014
Angle Bracket

143257014
M3E110-37: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-442-0218
Cover Strip

144420218
332A87-1079-24: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-461-7916
Retaining Bail

144617916
MAT162-0051F1: RNCC: 3 | RNVC: 2

24 Mar 1993

5340-14-522-9577
Mounting Bracket

145229577
ST159-2M516-2P17: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-14-458-7525
Angle Bracket

144587525
CLB43-11-800-07: RNCC: 3 | RNVC: 2

3 Nov 1992

5340-14-481-3535
Mounting Bracket

144813535
10143626: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-548-3980
Loop Clamp

145483980
EN4114F04WR1: RNCC: 2 | RNVC: 2

12 Jan 2006

5340-14-505-7189
Bow Handle

145057189
8602250: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-529-2286
Mounting Plate

145292286
010254035P: RNCC: 3 | RNVC: 2

19 Mar 2002

5340-14-305-2499
Angle Bracket

143052499
TH20C120: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-441-1144
Angle Bracket

144411144
39152332: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-437-8360
Mounting Plate

144378360
3005448: RNCC: 3 | RNVC: 2

21 Feb 1990

5340-14-479-6037
Dashpot

144796037
HP110MF3: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-14-448-2175
Rigid Caster

144482175
505823: RNCC: 3 | RNVC: 2

17 Jun 1991

5340-14-413-9103
Mending Plate

144139103
70532: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-422-7906
Mounting Bracket

144227906
39232617: RNCC: 3 | RNVC: 2
39232617: RNCC: 5 | RNVC: 9

17 Mar 1988

5340-14-381-3223
Retaining Strap

143813223
6626: RNCC: 3 | RNVC: 9
6626: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-528-9890
Mounting Bracket

145289890
706090: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-14-367-4398
Loop Clamp

143674398
21G26: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-549-8078
Mounting Bracket

145498078
F1260167: RNCC: 3 | RNVC: 2

15 May 2006

5340-14-548-7912
Mounting Plate

145487912
S311A1133206: RNCC: 3 | RNVC: 2

13 Feb 2006

5340-14-449-2764
Bridge Clamp

144492764
383028K: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-489-9265
Loop Clamp

144899265
650-402-516-0: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-14-551-6253
Utility Access Door

145516253
719379: RNCC: 3 | RNVC: 2

10 Oct 2006

5340-14-517-9076
Mounting Bracket

145179076
207613: RNCC: 3 | RNVC: 2

17 Jan 2000

5340-14-480-6561
Retaining Band

144806561
5010113779: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-254-8714
Corner Brace

142548714
711471: RNCC: 3 | RNVC: 9
062711471: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-486-5839
Detent Plunger

144865839
0B0177: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-14-493-1262
Bow Handle

144931262
5000368164: RNCC: 3 | RNVC: 2
F300 0T 010 4152: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-396-2227
Bumper

143962227
226149: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-430-6250
Retaining Strap

144306250
PM1A524140011: RNCC: 3 | RNVC: 2
PM1A524140011: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-379-4380
Angle Bracket

143794380
2206-323B503: RNCC: 3 | RNVC: 2

1 Oct 1982

5340-14-375-8958
Retaining Band

143758958
12040445: RNCC: 3 | RNVC: 9

30 Mar 1982

5340-14-360-1640
Angle Bracket

143601640
A11A221176390: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-276-4645
Retaining Strap

142764645
050332: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-504-3340
Mounting Bracket

145043340
3900622M91: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-414-2082
Retaining Strap

144142082
970414: RNCC: 3 | RNVC: 2
970414: RNCC: 5 | RNVC: 9

22 Jan 1987

5340-14-453-4220
Synchro Clamp

144534220
NO PRIMARY REF14-453-4220: RNCC: 3 | RNVC: 2
431866-1: RNCC: 5 | RNVC: 2

19 Feb 1992

5340-14-551-3347
Pipe Hanger

145513347
RA1A701296061: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-413-4987
Angle Bracket

144134987
121341: RNCC: 3 | RNVC: 2

17 Dec 1986

5340-14-556-0057
Retaining Strap

145560057
0319733830: RNCC: 3 | RNVC: 2

21 Jan 2008

5340-14-541-8363
Bridge Clamp

145418363
88179-1343: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-400-5432
Handwheel

144005432
1720-84-0226: RNCC: 3 | RNVC: 2

6 May 1985

5340-14-273-6914
Mending Plate

142736914
STB1-156673: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-318-8704
Pad Eye

143188704
L00474-82: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-318-3255
Angle Bracket

143183255
CV15-300563-5: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-428-8204
Mounting Bracket

144288204
790-0440: RNCC: 3 | RNVC: 2

22 Dec 1988

5340-14-299-9959
Mending Plate

142999959
5243-20-02: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-531-8186
Pipe Hanger

145318186
341A61-5021-23: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-528-9903
Mounting Bracket

145289903
706653: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-14-395-5067
Mounting Bracket

143955067
5-1881B43152-724: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-276-2182
Rod End Connector

142762182
A48265: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-539-8711
Webbing Strap

145398711
214080-0: RNCC: 3 | RNVC: 2

16 Feb 2004

5340-14-507-9895
Runner

145079895
4773124170: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-551-7940
Loop Clamp

145517940
5010571654: RNCC: 3 | RNVC: 2

25 Oct 2006

5340-14-551-3551
Angle Bracket

145513551
RA1A701856161: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-462-1401
Mounting Bracket

144621401
008456031P: RNCC: 3 | RNVC: 2

6 Apr 1993

5340-14-382-2361
Angle Bracket

143822361
A11A221172970: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-550-9045
Angle Bracket

145509045
RA1A701772191N1: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-418-5815
Permanent Magnet

144185815
2031: RNCC: 3 | RNVC: 2

2 Sep 1987

5340-14-464-3291
Mounting Bracket

144643291
ST406M75G71: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-546-5376
Mounting Plate

145465376
8048335P00: RNCC: 3 | RNVC: 2

18 Jul 2005

5340-14-536-7926
Mounting Bracket

145367926
130022: RNCC: 3 | RNVC: 9
130022.10: RNCC: 5 | RNVC: 9

17 Sep 2003

5340-14-391-8910
Anchor Strap

143918910
S3881CD: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-206-9177
Loop Clamp

142069177
511131050112: RNCC: 3 | RNVC: 2
55G11: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-503-5867
Access Cover

145035867
47029680: RNCC: 3 | RNVC: 2

21 Jan 1998

5340-14-511-8812
Webbing Strap

145118812
46249073: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-14-431-6084
Pipe Hanger

144316084
29740951: RNCC: 3 | RNVC: 2
29740951: RNCC: 5 | RNVC: 9

26 Apr 1989

5340-14-539-8577
Mounting Bracket

145398577
S720A3001200: RNCC: 3 | RNVC: 2

11 Feb 2004

5340-14-466-1751
Mounting Bracket

144661751
160247: RNCC: 3 | RNVC: 2
89169714: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-470-0954
Mounting Bracket

144700954
9962: RNCC: 3 | RNVC: 2
9962 10 00 00: RNCC: 5 | RNVC: 2

1 Jun 1994

5340-14-400-0755
Butt Hinge

144000755
214750: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-546-6146
Access Cover

145466146
TS143804Y01: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-14-535-2278
Mounting Bracket

145352278
6401LTF143: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-300-0332
Mending Plate

143000332
1849M8: RNCC: 3 | RNVC: 2
1849M8: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-338-6642
Angle Bracket

143386642
196530: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-455-9510
Plate Spacer

144559510
PM1A761710102: RNCC: 3 | RNVC: 2
PM1A761710102: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-509-1456
Mounting Bracket

145091456
RP78615: RNCC: 3 | RNVC: 9

21 Oct 1998

5340-14-460-9905
Mounting Bracket

144609905
5000496407: RNCC: 3 | RNVC: 2

17 Feb 1993

5340-14-554-3280
Lock Bolt

145543280
82124186000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-409-4360
Support Hook

144094360
4771622200: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-495-9946
Mounting Bracket

144959946
624498: RNCC: 3 | RNVC: 2
F300 0T 020 7172: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-504-7499
Mounting Plate

145047499
95970035: RNCC: 3 | RNVC: 2
5001824869: RNCC: 3 | RNVC: 2

3 Mar 1998

5340-14-504-0712
Loop Clamp

145040712
MB1187F00: RNCC: 3 | RNVC: 2

5 Feb 1998

5340-14-476-8332
Mounting Plate

144768332
705-820: RNCC: 3 | RNVC: 2

5 Jul 1995

5340-14-537-8468
Cushioning Pad

145378468
7776-900: RNCC: 3 | RNVC: 2
93ADCN1022895: RNCC: 3 | RNVC: 2

1 Dec 2003

5340-14-505-0601
Bumper

145050601
5516004859: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-537-5094
Swivel Caster

145375094
6501CMV132: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-529-4834
Pipe Hanger

145294834
D66423: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-421-0208
Retaining Strap

144210208
39533124: RNCC: 3 | RNVC: 2
39533124: RNCC: 5 | RNVC: 9

6 Jan 1988

5340-14-546-2933
Mounting Bracket

145462933
10477267: RNCC: 3 | RNVC: 2

22 Jun 2005

5340-14-454-8754
Retaining Clip

144548754
5000351916: RNCC: 3 | RNVC: 2

24 Apr 1992

5340-14-482-5024
Angle Bracket

144825024
PM1A711240122: RNCC: 3 | RNVC: 2
PM1A711240122: RNCC: 5 | RNVC: 2

11 Jul 1996

5340-14-354-1054
Retaining Strap

143541054
0120590057: RNCC: 3 | RNVC: 2
0120590057: RNCC: 5 | RNVC: 2

16 Jan 1979

5340-14-349-2482
Retaining Strap

143492482
1143165: RNCC: 3 | RNVC: 2
1143165: RNCC: 5 | RNVC: 2

22 May 1978

5340-14-549-8867
Mounting Plate

145498867
21106852: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-257-9277
Angle Bracket

142579277
C246863: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-533-6253
Mounting Plate

145336253
D105960B: RNCC: 3 | RNVC: 2

12 Feb 2003

5340-14-473-7340
Corner Brace

144737340
ALZ126055151020: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-373-6655
Retaining Strap

143736655
BAZ98888: RNCC: 3 | RNVC: 2

13 Nov 1981

Load More Results