What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 48 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 48 of 446

5340-14-335-3490
Access Cover

143353490
158668: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-450-8903
Plug Button

144508903
PM1A726119001Q1: RNCC: 3 | RNVC: 2
PM1A726119001Q1: RNCC: 5 | RNVC: 2

23 Oct 1991

5340-14-480-8768
Retaining Strap

144808768
009050222P: RNCC: 3 | RNVC: 2

5 Apr 1996

5340-14-298-9517
Detent Plunger

142989517
219155: RNCC: 3 | RNVC: 9
061219155: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-543-7468
Access Cover

145437468
4340379: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-14-376-4758
Access Cover

143764758
16559940: RNCC: 3 | RNVC: 2
16559940: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-292-5550
Angle Bracket

142925550
121E26-800-33-1: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-322-1295
Threaded Rod End

143221295
121E93-115-04-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-505-6562
Protection Bellows

145056562
MVS02-20: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-265-1365
Loop Clamp

142651365
55218-308-3101: RNCC: 3 | RNVC: 2
55218-308B316DB: RNCC: 5 | RNVC: 2
55218-308B316DB: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-539-7385
Mounting Plate

145397385
21023869-00: RNCC: 3 | RNVC: 2
21023869-5: RNCC: 5 | RNVC: 2

5 Feb 2004

5340-14-366-2769
Angle Bracket

143662769
A11A221176510A1: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-354-3784
Angle Bracket

143543784
462-01355-000: RNCC: 3 | RNVC: 2
28011646: RNCC: 5 | RNVC: 2
28011646-8: RNCC: 5 | RNVC: 2

31 Jan 1979

5340-14-493-1556
Mortise Lock Set

144931556
NO PRIMARY REF14-493-1556: RNCC: 3 | RNVC: 2
RM31484: RNCC: 5 | RNVC: 9
F300 0T 010 6995: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-407-2092
Access Cover

144072092
NO PRIMARY REF14-407-2092: RNCC: 3 | RNVC: 2
219430: RNCC: 5 | RNVC: 2
219430: RNCC: 5 | RNVC: 9

12 Feb 1986

5340-14-408-9153
Pipe Hanger

144089153
000140: RNCC: 3 | RNVC: 2

7 Apr 1986

5340-14-544-2135
Mounting Plate

145442135
AMPC GENE E221307: RNCC: 3 | RNVC: 2

11 Jan 2005

5340-14-540-3213
Mounting Bracket

145403213
NNM0010037380013: RNCC: 3 | RNVC: 2

18 Mar 2004

5340-14-391-9676
Detent Plunger

143919676
035891: RNCC: 3 | RNVC: 2
035188: RNCC: 5 | RNVC: 2
MBEU41687: RNCC: 5 | RNVC: 9

21 Mar 1984

5340-14-468-7387
Plate Spacer

144687387
PM1A713100063: RNCC: 3 | RNVC: 2
PM1A713100063: RNCC: 5 | RNVC: 2

16 Mar 1994

5340-14-515-7251
Angle Bracket

145157251
RA1M216900520A1: RNCC: 3 | RNVC: 2

28 Jul 1999

5340-14-346-8549
Angle Bracket

143468549
5411260U: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-14-403-8660
Bumper

144038660
7525-90027: RNCC: 3 | RNVC: 2

28 Aug 1985

5340-14-513-1607
Protection Bellows

145131607
641734: RNCC: 3 | RNVC: 2
641734: RNCC: 5 | RNVC: 9
PE1723: RNCC: 5 | RNVC: 9
F300 0T 018 3669: RNCC: 6 | RNVC: 9

8 Mar 1999

5340-14-526-8118
Bumper

145268118
5001835220: RNCC: 3 | RNVC: 2

7 Sep 2001

5340-14-430-6710
Detent Plunger

144306710
PM1A584190107: RNCC: 3 | RNVC: 2
PM1A584190107: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-436-7357
Mounting Bracket

144367357
DA2C203900911: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-543-9665
Mounting Bracket

145439665
4773127200: RNCC: 3 | RNVC: 9

19 Dec 2004

5340-14-550-9072
Mounting Plate

145509072
RA1B702206661: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-525-2363
Mounting Plate

145252363
632582: RNCC: 3 | RNVC: 2
06810P015014: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-536-8710
Mounting Bracket

145368710
030449: RNCC: 3 | RNVC: 2
30449: RNCC: 5 | RNVC: 2

17 Sep 2003

5340-14-552-8159
Retaining Strap

145528159
82172261000: RNCC: 3 | RNVC: 2
82172262: RNCC: 5 | RNVC: 2

5 Feb 2007

5340-14-554-2709
Mounting Bracket

145542709
82155944000: RNCC: 3 | RNVC: 2

18 Jun 2007

5340-14-502-0400
Leakproof Seal Plug

145020400
1030890046: RNCC: 3 | RNVC: 2
1030890046: RNCC: 5 | RNVC: 2

26 Nov 1997

5340-14-523-2615
Pipe Hanger

145232615
RA1M703886111: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-521-5609
Mounting Bracket

145215609
4344204: RNCC: 3 | RNVC: 2
4344204: RNCC: 5 | RNVC: 9

23 Aug 2000

5340-14-479-4229
Mounting Plate

144794229
749502: RNCC: 3 | RNVC: 2

10 Jan 1996

5340-14-332-2338
Synchro Clamp

143322338
002054005P: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-471-7314
Control Rod

144717314
2022134X: RNCC: 3 | RNVC: 2

14 Sep 1994

5340-14-447-2980
Mounting Bracket

144472980
A99001177: RNCC: 3 | RNVC: 2
A99001177: RNCC: 5 | RNVC: 9

15 May 1991

5340-14-460-5317
Mounting Bracket

144605317
20322644: RNCC: 3 | RNVC: 2
20322644: RNCC: 5 | RNVC: 9

27 Jan 1993

5340-14-364-5909
Retaining Strap

143645909
5000116642: RNCC: 3 | RNVC: 2
5000116642: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-528-5609
Mounting Plate

145285609
382129: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-535-2379
Mounting Bracket

145352379
6501PSE100001: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-365-6805
Leaf Spring

143656805
0000758913: RNCC: 3 | RNVC: 2
0000758913: RNCC: 5 | RNVC: 9
758913: RNCC: 5 | RNVC: 9

8 Oct 1980

5340-14-549-5443
Butt Hinge

145495443
106400: RNCC: 3 | RNVC: 2

13 Apr 2006

5340-14-497-8765
Mounting Plate

144978765
10293051: RNCC: 3 | RNVC: 2

22 Oct 1997

5340-14-546-0484
Mounting Bracket

145460484
10711616000: RNCC: 3 | RNVC: 2

8 Jun 2005

5340-14-499-4625
Mounting Bracket

144994625
3802673Y00: RNCC: 3 | RNVC: 2
3802673Y00: RNCC: 3 | RNVC: 2
3802673Y00: RNCC: 5 | RNVC: 9
F300 0T 022 4603: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-554-5416
Blank Panel

145545416
SE10419: RNCC: 3 | RNVC: 2

18 Jul 2007

5340-14-482-5604
Mounting Bracket

144825604
ALZ081055314001: RNCC: 3 | RNVC: 2

11 Jul 1996

5340-14-224-8639
Mending Plate

142248639
044BBF10APL2-2REP7: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-451-2500
Pipe Hanger

144512500
PM1A726172320: RNCC: 3 | RNVC: 2
PM1A726172320: RNCC: 5 | RNVC: 2

6 Nov 1991

5340-14-500-5257
Mounting Bracket

145005257
31196: RNCC: 3 | RNVC: 2
F300 0T 024 5430: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-336-4928
Retaining Strap

143364928
191842: RNCC: 3 | RNVC: 2

14 Aug 1976

5340-14-031-2382
Bumper

140312382
BJM00102: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-387-8282
Bumper

143878282
4080U: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-366-5011
Bridge Clamp

143665011
525555: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-554-1115
Loop Clamp

145541115
350 132: RNCC: 3 | RNVC: 2
350 132: RNCC: 3 | RNVC: 2

11 Jun 2007

5340-14-523-2919
Pipe Hanger

145232919
RA1M702436685: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-332-2200
Retaining Strap

143322200
091805: RNCC: 3 | RNVC: 2
091805N: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-516-4147
Access Cover

145164147
2650.057: RNCC: 3 | RNVC: 2
2650.057: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-469-4987
Angle Bracket

144694987
5010044702: RNCC: 3 | RNVC: 2

27 Apr 1994

5340-14-520-0719
Access Cover

145200719
47137792: RNCC: 3 | RNVC: 2

10 May 2000

5340-14-379-6850
Anchor Strap

143796850
42876: RNCC: 3 | RNVC: 9

20 Oct 1982

5340-14-537-4958
Access Cover

145374958
ST3319USP: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-532-6531
Access Cover

145326531
1089027E00: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-14-502-7374
Plug Button

145027374
3L4566: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-264-3237
Retaining Strap

142643237
111492: RNCC: 3 | RNVC: 2

9 Apr 1992

5340-14-277-0998
Access Cover

142770998
221522: RNCC: 3 | RNVC: 2
307510: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-552-1030
Access Cover

145521030
0249153640: RNCC: 3 | RNVC: 2

27 Nov 2006

5340-14-489-5385
Plug Button

144895385
29689207: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-14-541-9281
Access Cover

145419281
C66403100136: RNCC: 3 | RNVC: 2

2 Jul 2004

5340-14-503-0767
Access Cover

145030767
46246731: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-319-7869
Webbing Strap

143197869
001143005P: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-432-6393
Access Cover

144326393
50275: RNCC: 3 | RNVC: 2

19 Jun 1989

5340-14-359-0176
Access Cover

143590176
5038004101: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-306-8850
Access Cover

143068850
0268700080: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-518-5268
Access Cover

145185268
0945990426: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-507-9804
Access Cover

145079804
313483: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-494-5962
Access Cover

144945962
802 310 648: RNCC: 3 | RNVC: 2
F300 0T 017 5227: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-312-1118
Access Cover

143121118
172751: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-338-7128
Locking Stay

143387128
207438: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-230-1141
Loop Clamp

142301141
51211905015: RNCC: 3 | RNVC: 2
9560112760: RNCC: 5 | RNVC: 2
201901500: RNCC: 5 | RNVC: 2
20P15: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-504-8293
Retaining Strap

145048293
0315770610: RNCC: 3 | RNVC: 2

4 Mar 1998

5340-14-339-7782
Access Cover

143397782
15625102: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-554-5540
Plug Button

145545540
0164160210: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-14-473-9781
Access Cover

144739781
1559297: RNCC: 3 | RNVC: 2
1559297: RNCC: E | RNVC: 8

18 Jan 1995

5340-14-524-4449
Utility Access Door

145244449
C5644629V00: RNCC: 3 | RNVC: 2
SYB2071: RNCC: 5 | RNVC: 2

20 Mar 2001

5340-14-486-3207
Access Cover

144863207
45625511: RNCC: 3 | RNVC: 2
45625511: RNCC: 3 | RNVC: 9

12 Mar 1997

5340-14-555-0937
Mounting Bracket

145550937
82156729000: RNCC: 3 | RNVC: 2

27 Sep 2007

5340-14-407-6482
Retaining Band

144076482
12A36: RNCC: 3 | RNVC: 9

27 Feb 1986

5340-14-450-1691
Mounting Bracket

144501691
92PD260105: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-513-1724
Rigid Caster

145131724
10381574: RNCC: 3 | RNVC: 2

9 Mar 1999

5340-14-372-6591
Webbing Strap

143726591
4805B1000MM: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-381-8576
Mounting Plate

143818576
20068891: RNCC: 3 | RNVC: 2
20068891: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-553-3264
Mounting Bracket

145533264
10710924000: RNCC: 3 | RNVC: 2

24 Mar 2007

5340-14-316-4852
Bow Handle

143164852
439349: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-466-2824
Mounting Bracket

144662824
10227988: RNCC: 3 | RNVC: 2

3 Nov 1993

5340-14-376-4763
Angle Bracket

143764763
16559953: RNCC: 3 | RNVC: 2
16559953: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-417-5031
Pipe Hanger

144175031
DA1D287470050: RNCC: 3 | RNVC: 2

8 Jul 1987

5340-14-444-9808
Expansion Plug

144449808
1002563M01: RNCC: 3 | RNVC: 2

30 Jan 1991

5340-14-350-5118
Loop Clamp Kit

143505118
45493: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-468-6968
Angle Bracket

144686968
0308852110: RNCC: 3 | RNVC: 2
89277623: RNCC: 5 | RNVC: 2

16 Mar 1994

5340-14-523-3148
Mounting Plate

145233148
525023: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-341-8039
Angle Bracket

143418039
0035615355: RNCC: 3 | RNVC: 2
0035615355: RNCC: 5 | RNVC: 9

14 Apr 1977

5340-14-348-0713
Loop Clamp

143480713
511119050601: RNCC: 3 | RNVC: 2
35P60: RNCC: 5 | RNVC: 2

29 Mar 1978

5340-14-278-4591
Retaining Strap

142784591
5171191300: RNCC: 3 | RNVC: 2
711913: RNCC: 5 | RNVC: 1
711913: RNCC: 5 | RNVC: 2
711913: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-304-2470
Anchor Strap

143042470
000929015P: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-441-1354
Retaining Strap

144411354
16766081: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-296-3292
Mounting Bracket

142963292
780374: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-550-4833
Mounting Bracket

145504833
RA1A702436157: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-504-7366
Access Cover

145047366
593326U: RNCC: 3 | RNVC: 2

2 Mar 1998

5340-14-482-3108
Loop Clamp

144823108
DE21145: RNCC: 3 | RNVC: 2
89486643: RNCC: 5 | RNVC: 2

4 Jul 1996

5340-14-302-3792
Access Cover

143023792
171655: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-370-5407
Anchor Strap

143705407
21100132: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-329-0313
Rod End Clevis

143290313
R12608D12AELZ: RNCC: 2 | RNVC: 2
1051201220: RNCC: 3 | RNVC: 2
0003538727: RNCC: 5 | RNVC: 2
R12608D12AE: RNCC: 5 | RNVC: 9
3538727: RNCC: 5 | RNVC: 9
DAH1051201220: RNCC: 5 | RNVC: 9
0003538727: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-337-4354
Synchro Clamp

143374354
HB12AG200BS: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-250-0186
Expansion Plug

142500186
R93910A200GAT: RNCC: 2 | RNVC: 2
0000137569: RNCC: 5 | RNVC: 2
RDGA200T: RNCC: 5 | RNVC: 2
0000137569: RNCC: 5 | RNVC: 9
137569: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-350-4424
Rod End Clevis

143504424
190572: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-427-3232
Access Cover

144273232
800D501: RNCC: 3 | RNVC: 2
800D501: RNCC: 5 | RNVC: 2

13 Oct 1988

5340-14-306-9759
Access Cover

143069759
03-744260: RNCC: 3 | RNVC: 2
CR1244: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-462-6655
Access Cover

144626655
73788: RNCC: 3 | RNVC: 2
118269: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-460-8485
Mounting Plate

144608485
39703C: RNCC: 3 | RNVC: 2

10 Feb 1993

5340-14-445-3856
Rod End Clevis

144453856
BLC236023: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-14-358-5556
Access Cover

143585556
62219: RNCC: 3 | RNVC: 2
388758: RNCC: 5 | RNVC: 2

7 Sep 1979

5340-14-336-7285
Rod End Clevis

143367285
174234: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-478-7592
Anchor Strap

144787592
5010099819: RNCC: 3 | RNVC: 2

20 Nov 1995

5340-14-266-0927
Access Hole Frame

142660927
40312A: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-361-2100
Anchor Strap

143612100
BAZ97686: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-386-5543
Plug Button

143865543
16717: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-501-0405
Access Cover

145010405
45831526: RNCC: 3 | RNVC: 9
F300 0T 025 0708: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-525-7861
Mounting Bracket

145257861
F145026: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-434-2982
Access Cover

144342982
557815: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-340-9871
Retaining Strap

143409871
192738: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-512-7307
Access Cover

145127307
T281A20A0002: RNCC: 1 | RNVC: 2
503357: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-547-5779
Utility Access Door

145475779
PAP02156: RNCC: 3 | RNVC: 2

17 Oct 2005

5340-14-518-8930
Access Cover

145188930
29423982: RNCC: 3 | RNVC: 2

23 Feb 2000

5340-14-358-3957
Anchor Strap

143583957
387814: RNCC: 3 | RNVC: 2

13 Aug 1979

5340-14-381-5532
Anchor Strap

143815532
398002080201: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-498-4921
Access Cover

144984921
M80400548931C: RNCC: 3 | RNVC: 2
91971442: RNCC: 3 | RNVC: 2
F300 0T 005 3218: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-521-5759
Mending Plate

145215759
160-889175-02: RNCC: 3 | RNVC: 2

23 Aug 2000

5340-14-385-2381
Retaining Strap

143852381
1698-005A679: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-423-8191
Loop Clamp

144238191
620-858-587-0: RNCC: 3 | RNVC: 2

28 Apr 1988

5340-14-042-0026
Tubular Fairlead

140420026
121S77-250-10-0: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-376-5325
Anchor Strap

143765325
NO PRIMARY REF14-376-5325: RNCC: 3 | RNVC: 2
404304827: RNCC: 5 | RNVC: 2
404304827: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-358-9581
Loop Clamp

143589581
51313105004: RNCC: 3 | RNVC: 2
21G4: RNCC: 5 | RNVC: 2

7 Sep 1979

5340-14-330-9631
Rod End Connector

143309631
320295: RNCC: 3 | RNVC: 2
PAA42-22-003: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-526-9883
Retaining Strap

145269883
T257A0006156: RNCC: 3 | RNVC: 2

20 Sep 2001

5340-14-450-2086
Angle Bracket

144502086
5000902766: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-537-4985
Swivel Caster

145374985
TR1210MSP: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-350-5063
Runner

143505063
2908: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-206-8308
Loop Clamp

142068308
MT33GN: RNCC: 3 | RNVC: 2
MT33GN: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-497-2950
Mounting Plate

144972950
10300877: RNCC: 3 | RNVC: 2
F300 0T 022 9636: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-515-2189
Loop Clamp

145152189
0009550806: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-469-8200
Swivel Caster

144698200
900229: RNCC: 3 | RNVC: 2
91710766: RNCC: 5 | RNVC: 2

10 May 1994

5340-14-552-4244
Mounting Plate

145524244
9404ADM110900: RNCC: 3 | RNVC: 2

21 Dec 2006

5340-14-535-9660
Mounting Bracket

145359660
10274831: RNCC: 3 | RNVC: 2

2 Jul 2003

5340-14-327-1332
Loop Clamp

143271332
4307493: RNCC: 3 | RNVC: 2
4307493: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-474-8094
Mounting Plate

144748094
29779783: RNCC: 3 | RNVC: 9

1 Mar 1995

5340-14-518-4664
Mounting Bracket

145184664
T716A2002114: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-515-4048
Mounting Plate

145154048
20730258A: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-526-9452
Cover Strip

145269452
01-250-715: RNCC: 3 | RNVC: 2
SZ01.250.715: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-535-1940
Loop Clamp

145351940
5005005019: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-497-1998
Loop Clamp

144971998
10255287: RNCC: 3 | RNVC: 2
F300 0T 022 8143: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-478-7241
Mounting Bracket

144787241
45274535: RNCC: 3 | RNVC: 2
45274535: RNCC: 3 | RNVC: 9

20 Nov 1995

5340-14-227-9732
Loop Clamp

142279732
200736: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-408-9487
Angle Bracket

144089487
79086624: RNCC: 3 | RNVC: 2
79086624: RNCC: 5 | RNVC: 9

9 Apr 1986

5340-14-551-4951
Angle Bracket

145514951
RA1B701986521: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-484-6747
Mounting Plate

144846747
45609087: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-450-2887
Dashpot Piston

144502887
PM1A275089012: RNCC: 3 | RNVC: 2
PM1A275089012: RNCC: 5 | RNVC: 2

25 Sep 1991

5340-14-485-5896
Mounting Plate

144855896
PL1NA003BA012601: RNCC: 3 | RNVC: 2

30 Jan 1997

5340-14-468-6915
Mounting Plate

144686915
D50261: RNCC: 3 | RNVC: 2

16 Mar 1994

5340-14-421-6367
Retaining Strap

144216367
228107: RNCC: 3 | RNVC: 2

20 Jan 1988

5340-14-378-9538
Loop Clamp

143789538
9150088280: RNCC: 3 | RNVC: 2
1715-79: RNCC: 5 | RNVC: 2

6 Sep 1982

5340-14-388-4678
Angle Bracket

143884678
52630810000: RNCC: 3 | RNVC: 2
526308100: RNCC: 5 | RNVC: 2

3 Nov 1983

5340-14-534-7308
Pipe Hanger

145347308
NNM0010032601174: RNCC: 2 | RNVC: 2

2 Apr 2003

5340-14-230-1098
Bumper

142301098
LXA66P: RNCC: 3 | RNVC: 9

1 Jan 1967

5340-14-554-0268
Loop Clamp

145540268
358 572: RNCC: 3 | RNVC: 2
358 572: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-14-385-2805
Retaining Strap

143852805
397628: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-449-1569
Angle Bracket

144491569
39066339: RNCC: 3 | RNVC: 2

31 Jul 1991

5340-14-549-9043
Angle Bracket

145499043
2092190: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-331-7039
Leaf Spring

143317039
0000260841: RNCC: 3 | RNVC: 2
0000260841: RNCC: 5 | RNVC: 9
260841: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-382-5504
Retaining Strap

143825504
20068569: RNCC: 3 | RNVC: 2
20068569: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-463-8722
Retaining Strap

144638722
166022: RNCC: 3 | RNVC: 2
89170133: RNCC: 5 | RNVC: 2

30 Jun 1993

5340-14-438-5836
Webbing Strap

144385836
TB3011420: RNCC: 3 | RNVC: 2

27 Mar 1990

5340-14-352-7555
Mending Plate

143527555
140110: RNCC: 3 | RNVC: 2
140110: RNCC: 5 | RNVC: 2

14 Nov 1978

5340-14-497-3631
Filler Opening Cap

144973631
809910931: RNCC: 3 | RNVC: 2
T2309054H: RNCC: 5 | RNVC: 9
F300 0T 023 0603: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-485-0199
Angle Bracket

144850199
3BM01316AAAA: RNCC: 3 | RNVC: 2
3BM01316AAAA: RNCC: 5 | RNVC: 9

19 Dec 1996

5340-14-480-2209
Door Holder

144802209
92PD130103: RNCC: 3 | RNVC: 2

28 Feb 1996

5340-14-445-8872
Bridge Clamp

144458872
39959448: RNCC: 3 | RNVC: 2
39959448: RNCC: 5 | RNVC: 9

27 Feb 1991

5340-14-539-9704
Cover Strip

145399704
RA1B701960331: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-407-5658
Webbing Strap

144075658
8158609: RNCC: 3 | RNVC: 2

27 Feb 1986

5340-14-353-0238
Pipe Hanger

143530238
A11A231352010: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-426-7099
Runner

144267099
20393566: RNCC: 3 | RNVC: 2

15 Sep 1988

5340-14-549-2563
Self-Locking Insert

145492563
0376-05-12: RNCC: 3 | RNVC: 2

15 Mar 2006

5340-14-394-9541
Angle Bracket

143949541
29744233: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-354-0557
Mending Plate

143540557
A11A224100004: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-483-8002
Masking Plate

144838002
8001123S00: RNCC: 3 | RNVC: 2

3 Oct 1996

5340-14-382-3332
Retaining Strap

143823332
ST406M52P649: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-414-0068
Bumper

144140068
7700663289: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-480-8091
Angle Bracket

144808091
009056378P: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-14-451-5864
Protection Bellows

144515864
TE100644: RNCC: 3 | RNVC: 2
TE100644: RNCC: 5 | RNVC: 2

25 Nov 1991

5340-14-459-4605
Angle Bracket

144594605
LN400011F11REPE3: RNCC: 3 | RNVC: 2
LN400011F4REPE3: RNCC: 5 | RNVC: 2

1 Dec 1992

5340-14-527-3927
Bumper

145273927
H145516W: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-453-4412
Angle Bracket

144534412
535559: RNCC: 3 | RNVC: 2

19 Feb 1992

5340-14-504-0946
Retaining Clip

145040946
143481: RNCC: 3 | RNVC: 9

5 Feb 1998

5340-14-468-3865
Mounting Bracket

144683865
CV124-1-1: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-14-478-3425
Eye Hook

144783425
120E075-00: RNCC: 3 | RNVC: 2
120E075-00: RNCC: 5 | RNVC: 9

25 Oct 1995

5340-14-278-2078
Loop Clamp

142782078
NO PRIMARY REF14-278-2078: RNCC: 3 | RNVC: 2
2411 025 07004: RNCC: 5 | RNVC: 2
12331: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-444-4549
Detent Plunger

144444549
230976: RNCC: 3 | RNVC: 2
85-694-3375: RNCC: 6 | RNVC: 9

9 Jan 1991

5340-14-247-3314
Loop Clamp

142473314
321A86-0060-20: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-382-5013
Loop Clamp

143825013
045S03-576138B: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-440-6807
Mounting Bracket

144406807
332A94-3501-20: RNCC: 3 | RNVC: 2

18 Jul 1990

5340-14-408-0302
Mounting Plate

144080302
20723985-9: RNCC: 3 | RNVC: 2
723985: RNCC: 5 | RNVC: 2

19 Mar 1986

5340-14-519-7019
Mounting Bracket

145197019
350A38-1034-20: RNCC: 3 | RNVC: 2

29 Mar 2000

5340-14-332-3664
Mounting Bracket

143323664
341A61-1315-21: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-418-4848
Belt-Strap Keeper

144184848
61559: RNCC: 3 | RNVC: 2

26 Aug 1987

5340-14-565-5950
Utility Access Door

145655950
AMPC GENE E 290058: RNCC: 3 | RNVC: 2

6 Sep 2010

5340-14-344-6099
Loop Clamp

143446099
01140002010: RNCC: 3 | RNVC: 2
114-02: RNCC: 5 | RNVC: 2
114002: RNCC: 5 | RNVC: 2
3597470002568: RNCC: 5 | RNVC: 2
199400: RNCC: 5 | RNVC: 2
AMG199400: RNCC: 5 | RNVC: 2

9 Sep 1977

5340-14-473-6956
Mounting Plate

144736956
365A52-1382-00: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-465-0421
Turnbuckle Body

144650421
REMDCHEGZLE-SERT-020009-: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-473-1786
Mounting Bracket

144731786
27108706-0: RNCC: 3 | RNVC: 2

7 Dec 1994

5340-14-363-8881
Anchor Strap

143638881
NO PRIMARY REF14-363-8881: RNCC: 3 | RNVC: 2
Y45528: RNCC: 5 | RNVC: 9

7 Aug 1980

5340-14-553-0989
Mounting Bracket

145530989
47243075AA: RNCC: 3 | RNVC: 2

1 Mar 2007

5340-14-417-4522
Retaining Strap

144174522
PDP1021: RNCC: 3 | RNVC: 2

8 Jul 1987

5340-14-512-5304
Elastic Strap

145125304
SANDO91152X00: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-349-2965
Loop Clamp

143492965
51213113014: RNCC: 3 | RNVC: 2
400G14: RNCC: 5 | RNVC: 2

22 May 1978

5340-14-423-9863
Pad Eye

144239863
639100638: RNCC: 3 | RNVC: 2
89174121: RNCC: 5 | RNVC: 2
639100638: RNCC: 5 | RNVC: 9

5 May 1988

5340-14-540-7469
Mounting Bracket

145407469
38051781: RNCC: 3 | RNVC: 2
ND090813: RNCC: 5 | RNVC: 2
4848ZG8613181450: RNCC: 6 | RNVC: 9

23 Apr 2004

5340-14-396-0724
Angle Bracket

143960724
224977: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-517-4788
Mounting Plate

145174788
29491402: RNCC: 3 | RNVC: 2

17 Dec 1999

5340-14-439-2525
Mounting Bracket

144392525
1180985: RNCC: 3 | RNVC: 2
1180985: RNCC: 5 | RNVC: 2

25 Apr 1990

5340-14-487-5134
Mounting Plate

144875134
RA1M525092420: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-544-3397
Mounting Bracket

145443397
10682565000: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-14-396-4043
Hand Crank Arm

143964043
005631035P: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-515-8014
Mounting Bracket

145158014
47217656: RNCC: 3 | RNVC: 2

4 Aug 1999

5340-14-484-3313
Stand Base

144843313
013G5193: RNCC: 3 | RNVC: 2

8 Nov 1996

5340-14-551-2687
Angle Bracket

145512687
RA1A701636025: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-540-6496
Mounting Bracket

145406496
38051407: RNCC: 3 | RNVC: 2
438834: RNCC: 5 | RNVC: 2
4848ZG8613180222: RNCC: 6 | RNVC: 9

14 Apr 2004

5340-14-538-4327
Stand Base

145384327
NGM0010037124678: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-398-9627
Retaining Strap

143989627
1146132: RNCC: 3 | RNVC: 2
1146132: RNCC: 5 | RNVC: 2

6 Mar 1985

5340-14-266-2036
Mending Plate

142662036
451734: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-518-1194
Mounting Plate

145181194
5000704351: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-354-0777
Angle Bracket

143540777
A11A238010004: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-516-8485
Mounting Bracket

145168485
101160111490: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-14-401-3130
Tee Hinge

144013130
223471: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-383-7688
Pipe Hanger

143837688
902UGS0639: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-540-9477
Buckle

145409477
9405.49059: RNCC: 3 | RNVC: 2

5 May 2004

5340-14-481-2705
Tubular Fairlead

144812705
ALZ089550161020: RNCC: 3 | RNVC: 2
ALZ0895501610: RNCC: 5 | RNVC: 2

25 Apr 1996

5340-14-400-3695
Mortise Lock Set

144003695
6380GAUCHE: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-520-3420
Mounting Bracket

145203420
40146768: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-302-7352
Runner

143027352
A2PL9426: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-525-5802
Mounting Plate

145255802
10 146 020 1020: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-555-1480
Mounting Bracket

145551480
000950: RNCC: 3 | RNVC: 2

5 Oct 2007

5340-14-542-1187
Loop Clamp

145421187
123170050015: RNCC: 3 | RNVC: 2

7 Jul 2004

5340-14-411-2260
Access Cover

144112260
0064630350: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-513-6093
Loop Clamp

145136093
5010380575: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-14-388-4961
Detent Plunger

143884961
129690: RNCC: 3 | RNVC: 9

3 Nov 1983

5340-14-364-0393
Rod End Clevis

143640393
021124001102: RNCC: 3 | RNVC: 2
021124001102: RNCC: 5 | RNVC: 2

7 Aug 1980

5340-14-420-8655
Angle Bracket

144208655
314318: RNCC: 3 | RNVC: 2
314318: RNCC: 5 | RNVC: 9

16 Dec 1987

5340-14-314-4648
Angle Bracket

143144648
170664: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-552-9857
Swivel Caster

145529857
D500161: RNCC: 3 | RNVC: 2

21 Feb 2007

5340-14-547-4701
Lock Bolt

145474701
22355-CANON AVEC LOQUET: RNCC: 3 | RNVC: 2

14 Oct 2005

5340-14-507-8730
Mounting Plate

145078730
47029480: RNCC: 3 | RNVC: 2

20 Aug 1998

5340-14-534-7197
Mounting Bracket

145347197
10597462: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-275-2869
Handwheel

142752869
1301: RNCC: 3 | RNVC: 2
DV1301: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-228-0414
Angle Bracket

142280414
0077130110: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-411-7895
Rod End Clevis

144117895
R12608D10GAZ: RNCC: 2 | RNVC: 2

3 Sep 1986

5340-14-372-1973
Access Cover

143721973
26426444: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-431-7564
Mounting Plate

144317564
39079627: RNCC: 3 | RNVC: 2
39079627: RNCC: 3 | RNVC: 9

10 May 1989

5340-14-546-8949
Access Cover

145468949
5311390000: RNCC: 3 | RNVC: 2
03820201: RNCC: 5 | RNVC: 2

2 Sep 2005

5340-14-246-3758
Mending Plate

142463758
M108729: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-543-0662
Mounting Bracket

145430662
S623A2117201: RNCC: 3 | RNVC: 2

18 Aug 2004

5340-14-308-0314
Retaining Band

143080314
A76535: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-403-0508
Angle Bracket

144030508
29739282: RNCC: 3 | RNVC: 2
29739282: RNCC: 5 | RNVC: 9

25 Jul 1985

5340-14-547-5248
Angle Bracket

145475248
RA1M704854431N1: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-553-6883
Mounting Plate

145536883
82182691000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-547-4549
Mounting Plate

145474549
5010399851: RNCC: 3 | RNVC: 2

13 Oct 2005

5340-14-480-2236
Door Handle

144802236
05.05.0026: RNCC: 3 | RNVC: 2

28 Feb 1996

5340-14-535-3570
Butt Hinge

145353570
66981530: RNCC: 3 | RNVC: 2
5001852538: RNCC: 5 | RNVC: 2

22 May 2003

5340-14-535-0492
Mounting Bracket

145350492
T947A1001205: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-14-546-5328
Mounting Plate

145465328
8056252F00: RNCC: 3 | RNVC: 2

18 Jul 2005

5340-14-541-5347
Mounting Bracket

145415347
1091673: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-362-0125
Retaining Strap

143620125
23074726-8: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-220-4833
Mending Plate

142204833
NO PRIMARY REF14-220-4833: RNCC: 3 | RNVC: 2
22166: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-367-9915
Door Closer

143679915
RM100-3: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-546-9936
Strap End Clip

145469936
90119-001: RNCC: 3 | RNVC: 2
90119001: RNCC: 5 | RNVC: 2

12 Sep 2005

5340-14-478-8419
Access Cover

144788419
452-14674-000: RNCC: 3 | RNVC: 2

23 Nov 1995

5340-14-352-6889
Rim Lock Set

143526889
1000061-3-5: RNCC: 3 | RNVC: 2
2000070-3-23: RNCC: 3 | RNVC: 2
4223M0D: RNCC: 5 | RNVC: 9

14 Nov 1978

5340-14-384-0877
Bridge Clamp

143840877
NO PRIMARY REF14-384-0877: RNCC: 3 | RNVC: 2
709970: RNCC: 5 | RNVC: 9

4 May 1983

5340-14-469-2194
Access Cover

144692194
CA2233-1SC1: RNCC: 3 | RNVC: 2
85-695-2872: RNCC: 6 | RNVC: 9

13 Apr 1994

5340-14-440-1374
Mounting Plate

144401374
355A81-0162-05: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-484-8226
Mounting Bracket

144848226
332P69-3500-20: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-521-2400
Bumper

145212400
S8576794: RNCC: 3 | RNVC: 2

12 Jul 2000

5340-14-515-9115
Rod End Clevis

145159115
702264: RNCC: 3 | RNVC: 2

26 Aug 1999

5340-14-202-8421
Retaining Strap

142028421
0000361799: RNCC: 3 | RNVC: 2
0000361799: RNCC: 5 | RNVC: 9
361799: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-14-528-5856
Rod Retainer Clip

145285856
935249: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-525-8599
Utility Access Door

145258599
39072968: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-477-6954
Access Cover

144776954
38020433: RNCC: 3 | RNVC: 2
38020433: RNCC: 5 | RNVC: 9

20 Sep 1995

5340-14-529-8033
Butt Hinge

145298033
19215138: RNCC: 3 | RNVC: 2

10 Apr 2002

5340-14-520-1724
Cable Retractor

145201724
45272353: RNCC: 3 | RNVC: 2
45272353: RNCC: 3 | RNVC: 9

17 May 2000

5340-14-385-8867
Anchor Strap

143858867
6101A187: RNCC: 3 | RNVC: 9

24 Aug 1983

5340-14-520-0854
Turnbuckle Body

145200854
RA1M216400801A2: RNCC: 3 | RNVC: 2

10 May 2000

5340-14-536-7928
Utility Access Door

145367928
603W034: RNCC: 3 | RNVC: 2

17 Sep 2003

5340-14-545-6828
Angle Bracket

145456828
RA1M703736181N1: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-402-7135
Luggage Handle

144027135
4PO2601P01: RNCC: 3 | RNVC: 2
LH940K4K1924X5IR: RNCC: 5 | RNVC: 9

19 Jul 1985

5340-14-485-6287
Access Cover

144856287
NM30799: RNCC: 3 | RNVC: 2

6 Feb 1997

5340-14-535-9688
Mounting Plate

145359688
401807: RNCC: 3 | RNVC: 2

2 Jul 2003

5340-14-451-1907
Mounting Bracket

144511907
184106: RNCC: 3 | RNVC: 2

6 Nov 1991

5340-14-378-2413
Rod End Connector

143782413
2-150674-6: RNCC: 3 | RNVC: 2
2-150674-6: RNCC: 5 | RNVC: 9

20 Jul 1982

5340-14-263-4122
Retaining Strap

142634122
R403038: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-490-4494
Lever Bracket

144904494
0176-479087: RNCC: 3 | RNVC: 2

30 Sep 1997

5340-14-442-1661
Angle Bracket

144421661
16587105: RNCC: 3 | RNVC: 2

3 Oct 1990

5340-14-444-1557
Block Clamp

144441557
PM1A725281180: RNCC: 3 | RNVC: 2
PM1A725281180: RNCC: 5 | RNVC: 2

18 Dec 1990

5340-14-418-4569
Mounting Plate

144184569
3-448549: RNCC: 3 | RNVC: 9
3-448549: RNCC: 5 | RNVC: 2
3-448549: RNCC: 5 | RNVC: 9

26 Aug 1987

5340-14-440-9532
Mounting Plate

144409532
A-JA0483-1: RNCC: 3 | RNVC: 9
A-JA0483-1: RNCC: 5 | RNVC: 2
AJA0483-1: RNCC: 5 | RNVC: 9

8 Aug 1990

5340-14-200-4376
Strap End Clip

142004376
AMG9424-1: RNCC: 3 | RNVC: 2
000689007P: RNCC: 3 | RNVC: 2

1 Jan 1962

5340-14-548-0987
Angle Bracket

145480987
RA1M701926261: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-415-5838
Bail Handle

144155838
100570: RNCC: 3 | RNVC: 2

18 May 1987

5340-14-439-1792
Bumper

144391792
SJ5027N0IR: RNCC: 3 | RNVC: 2
91368539: RNCC: 5 | RNVC: 2
192-2670: RNCC: 5 | RNVC: 2

25 Apr 1990

5340-14-485-6195
Mounting Bracket

144856195
3BM00996AAAA: RNCC: 3 | RNVC: 2
3BM00996AAAA: RNCC: 5 | RNVC: 9

6 Feb 1997

5340-14-479-2237
Bumper

144792237
100A108108-1: RNCC: 3 | RNVC: 2

19 Dec 1995

5340-14-530-2330
Mounting Bracket

145302330
27161433-3: RNCC: 3 | RNVC: 2

22 May 2002

5340-14-400-4608
Case Corner

144004608
8012ACIERNICKELE: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-417-5326
Shimmy Damper

144175326
4047A412AREP5: RNCC: 3 | RNVC: 2
502018: RNCC: 5 | RNVC: 2

8 Jul 1987

5340-14-520-8707
Webbing Strap

145208707
47148819: RNCC: 3 | RNVC: 2

21 Jun 2000

5340-14-438-5232
Cover Strip

144385232
DA2C244926751: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-429-5860
Mounting Bracket

144295860
39534886: RNCC: 3 | RNVC: 2
39534886: RNCC: 5 | RNVC: 9

1 Feb 1989

5340-14-286-3330
Loop Clamp

142863330
51300005026: RNCC: 3 | RNVC: 2
11N26: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-548-0402
Bumper

145480402
5010538851: RNCC: 3 | RNVC: 2

7 Dec 2005

5340-14-407-0391
Runner

144070391
1009647: RNCC: 3 | RNVC: 2

29 Jan 1986

5340-14-312-1214
Support Hook

143121214
181808: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-401-3217
Bridge Clamp

144013217
02K5540020: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-358-1931
Rim Lock

143581931
SGB1: RNCC: 3 | RNVC: 2
5000064641: RNCC: 5 | RNVC: 2
5000064641: RNCC: 5 | RNVC: 9

13 Aug 1979

5340-14-457-3505
Block Fairlead

144573505
5000730849: RNCC: 3 | RNVC: 2

27 Aug 1992

5340-14-433-7510
Corner Brace

144337510
RP944491: RNCC: 3 | RNVC: 2

7 Aug 1989

5340-14-439-2095
Mounting Bracket

144392095
16008451: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-460-0099
Rigid Caster

144600099
45215593: RNCC: 3 | RNVC: 2
45215593: RNCC: 5 | RNVC: 9

7 Jan 1993

5340-14-414-5713
Retaining Strap

144145713
230370: RNCC: 3 | RNVC: 2

11 Feb 1987

5340-14-515-3326
Mounting Plate

145153326
3534321101: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-540-9610
Filler Opening Cap

145409610
MB5382F00: RNCC: 3 | RNVC: 2

5 May 2004

5340-14-549-6210
Mounting Plate

145496210
JCB 10 135-713: RNCC: 3 | RNVC: 2

24 Apr 2006

5340-14-280-3966
Access Cover

142803966
91-2866: RNCC: 3 | RNVC: 2
ATS91-2866: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-268-9938
Handwheel

142689938
000MA1055F6REP1: RNCC: 3 | RNVC: 2
000MA0060F8-4C1: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-506-2497
Filler Opening Cap

145062497
05802-011: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-14-340-2685
Mending Plate

143402685
M267-10716: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-495-8868
Filler Opening Cap

144958868
BR1036-1: RNCC: 3 | RNVC: 2
911B80-3: RNCC: 5 | RNVC: 9
F300 0T 020 4272: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-206-2514
Loop Clamp

142062514
4700711470: RNCC: 3 | RNVC: 2
7007-147: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-464-8440
Mounting Bracket

144648440
6223-24: RNCC: 3 | RNVC: 2
9252787780: RNCC: 5 | RNVC: 2

1 Sep 1993

5340-14-314-5694
Loop Clamp

143145694
51413105012: RNCC: 3 | RNVC: 2
28G12: RNCC: 5 | RNVC: 2
A0021-28G12: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-418-4837
Leaf Spring

144184837
L80G244LD950EP9: RNCC: 3 | RNVC: 2
L80G244-6: RNCC: 5 | RNVC: 2
R80G244LD950EP9: RNCC: 5 | RNVC: 2
1105-162: RNCC: 5 | RNVC: 2

26 Aug 1987

5340-14-297-4655
Rim Lock Set

142974655
1127ACAME981-9: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-216-6784
Locking Stay

142166784
NO PRIMARY REF14-216-6784: RNCC: 3 | RNVC: 2
M11050-10: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-470-3351
Vent Plug

144703351
203505: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-480-8650
Retaining Strap

144808650
480091: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-14-481-2604
Runner

144812604
10032251: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-14-226-1883
Bumper

142261883
1521-25-588: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-535-6342
Loop Clamp

145356342
61313106014: RNCC: 3 | RNVC: 2
5000603221: RNCC: 5 | RNVC: 2

11 Jun 2003

5340-14-259-5882
Access Cover

142595882
FE1915: RNCC: 3 | RNVC: 9

1 Jan 1969

5340-14-526-5683
Swivel Caster

145265683
76139: RNCC: 3 | RNVC: 9

1 Aug 2001

5340-14-549-2192
Retaining Strap

145492192
0 264 02 051 0: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-14-405-2874
Mounting Plate

144052874
526671000: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-326-3886
Pad Eye

143263886
24C4681: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-493-6847
Mounting Plate

144936847
343 649 IND.1: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-338-4997
Quick Release Pin

143384997
ST406M79P124: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-468-2856
Eye Hook

144682856
45083698: RNCC: 3 | RNVC: 2
45083698: RNCC: 3 | RNVC: 9

16 Feb 1994

5340-14-514-0751
Pawl Fastener Set

145140751
PM1A005001N03: RNCC: 3 | RNVC: 2
PM1A005001N03: RNCC: 5 | RNVC: 2
MJBL: RNCC: 5 | RNVC: 9

22 Apr 1999

5340-14-226-5459
Snap Hook

142265459
22121: RNCC: 3 | RNVC: 2
AB38-1: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-362-9548
Eye Hook

143629548
456326346: RNCC: 3 | RNVC: 9

3 Apr 1980

5340-14-503-0288
Rod End Connector

145030288
131-339: RNCC: 3 | RNVC: 2

22 Dec 1997

5340-14-485-4500
Runner

144854500
2-32161: RNCC: 3 | RNVC: 2

23 Jan 1997

5340-14-462-7371
Synchro Clamp

144627371
PM1A728110001: RNCC: 3 | RNVC: 2
PM1A728110001: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-425-4522
Mounting Plate

144254522
27117980-5: RNCC: 3 | RNVC: 2

5 Jul 1988

5340-14-265-2890
Strap Hinge

142652890
1064-150: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-510-0249
Mounting Bracket

145100249
3CGF52A61A: RNCC: 3 | RNVC: 2
1005AA2015433: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-353-6434
Mounting Bracket

143536434
061965-2: RNCC: 3 | RNVC: 2
0-61965-2: RNCC: 5 | RNVC: 2

16 Jan 1979

5340-14-357-0492
Flush Catch Claw

143570492
388842: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-295-6160
Rod End Clevis

142956160
17-2-7067: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-295-0762
Synchro Clamp

142950762
S2299-2: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-302-8003
Mortise Lock Set

143028003
A4G2EDR0ITE: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-396-5963
Flush Catch Claw

143965963
66431: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-526-4557
Retaining Strap

145264557
RA1M705236321A1: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-541-4647
Mounting Bracket

145414647
1SH41780420: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-544-5335
Threaded Rod End

145445335
5440010: RNCC: 3 | RNVC: 2

9 Feb 2005

5340-14-432-8592
Webbing Strap

144328592
8158601: RNCC: 3 | RNVC: 2

28 Jun 1989

5340-14-505-4250
Loop Clamp

145054250
12057032: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-572-9031
Utility Access Door

145729031
08092: RNCC: 3 | RNVC: 2

24 Aug 2012

5340-14-475-5955
Retaining Strap

144755955
5210000022: RNCC: 3 | RNVC: 2
5210000022: RNCC: 5 | RNVC: 2
5210000022: RNCC: 5 | RNVC: 2
W100000011: RNCC: 5 | RNVC: 2
F300 0T 012 6308: RNCC: 6 | RNVC: 9

19 Apr 1995

5340-14-397-9750
Retaining Strap

143979750
401058: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-454-8801
Mounting Plate

144548801
5000711540: RNCC: 3 | RNVC: 2
89471832: RNCC: 5 | RNVC: 2

24 Apr 1992

5340-14-428-3351
Mounting Plate

144283351
3005359: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-383-3130
Mounting Plate

143833130
27352: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-539-3277
Mounting Bracket

145393277
20713206: RNCC: 3 | RNVC: 2

22 Dec 2003

5340-14-480-8379
Angle Bracket

144808379
10334932: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-14-350-4799
Retaining Strap

143504799
196682: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-513-8461
Angle Bracket

145138461
326471: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-552-5515
Blank Panel

145525515
82115622000: RNCC: 3 | RNVC: 2

16 Jan 2007

5340-14-399-7004
Tubular Fairlead

143997004
254243: RNCC: 3 | RNVC: 2
254243: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-448-9989
Mending Plate

144489989
130511: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-14-552-7991
Mounting Plate

145527991
55106: RNCC: 3 | RNVC: 2

2 Feb 2007

5340-14-523-2918
Pipe Hanger

145232918
RA1M702436681A2: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-332-2510
Loop Clamp

143322510
18543: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-369-8752
Handwheel

143698752
52549614-64: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-344-5879
Runner

143445879
146-70AT: RNCC: 3 | RNVC: 2

9 Sep 1977

5340-14-373-1467
Mending Plate

143731467
121101120: RNCC: 3 | RNVC: 9

21 Oct 1981

5340-14-457-7402
Mounting Bracket

144577402
205878: RNCC: 3 | RNVC: 2

17 Sep 1992

5340-14-310-5630
Push Door Plate

143105630
178772: RNCC: 3 | RNVC: 9
178772: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-486-5040
Angle Bracket

144865040
P110141: RNCC: 3 | RNVC: 2

21 Mar 1997

5340-14-537-6971
Shimmy Damper

145376971
28511034: RNCC: 3 | RNVC: 2
89304448: RNCC: 5 | RNVC: 2

19 Nov 2003

5340-14-417-1199
Butt Hinge

144171199
AMU10004: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-14-541-7845
Butt Hinge

145417845
STBF015A: RNCC: 3 | RNVC: 2
4320000360: RNCC: 5 | RNVC: 2

26 Jun 2004

5340-14-334-0813
Bumper

143340813
F10A101001302: RNCC: 3 | RNVC: 2

23 Apr 1976

5340-14-506-7369
Mounting Plate

145067369
BB2517-1: RNCC: 3 | RNVC: 2

13 May 1998

5340-14-459-9727
Access Cover

144599727
23211287-7: RNCC: 3 | RNVC: 2

7 Jan 1993

5340-14-338-3375
Handwheel

143383375
GSM137-013F12: RNCC: 3 | RNVC: 2
GSM137-13F12: RNCC: 5 | RNVC: 2

6 Nov 1976

5340-14-305-0689
Tubular Fairlead

143050689
M3R251-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-333-6121
Rod End Clevis

143336121
5101-05-02: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-473-8373
Mounting Bracket

144738373
332A61-6433-01: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-485-2626
Mounting Plate

144852626
31-0011-012: RNCC: 3 | RNVC: 2

15 Jan 1997

5340-14-349-9141
Anchor Strap

143499141
6511-05218: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-254-2307
Retaining Strap

142542307
P00369-97: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-496-9088
Mounting Bracket

144969088
NO PRIMARY REF14-496-9088: RNCC: 3 | RNVC: 2
270-01-89227: RNCC: 5 | RNVC: 9
F300 0T 022 2584: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-391-8903
Bumper

143918903
368-03520-19: RNCC: 3 | RNVC: 9

21 Mar 1984

5340-14-414-8524
Loop Clamp

144148524
TB30-55024-001: RNCC: 3 | RNVC: 2

16 Mar 1987

5340-14-406-0960
Expansion Plug

144060960
NO PRIMARY REF14-406-0960: RNCC: 3 | RNVC: 2
69200065: RNCC: 5 | RNVC: 9
GPN600B1065: RNCC: 5 | RNVC: 9

8 Jan 1986

5340-14-454-5729
Loop Clamp

144545729
F12GB3212-018: RNCC: 3 | RNVC: 2
F12GB3212-018: RNCC: 5 | RNVC: 9

7 Apr 1992

5340-14-423-0418
Angle Bracket

144230418
8710-22: RNCC: 3 | RNVC: 2
ZF05926010: RNCC: 3 | RNVC: 2
5926010: RNCC: 5 | RNVC: 2
ZF05926010: RNCC: 5 | RNVC: 2

31 Mar 1988

5340-14-374-4186
Handwheel

143744186
GSM137-013F24: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-537-4088
Pipe Hanger

145374088
8067-08: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-565-8631
Utility Resilient Mount

145658631
MP4-145: RNCC: 3 | RNVC: 2

29 Sep 2010

5340-14-501-7573
Runner

145017573
NO PRIMARY REF14-501-7573: RNCC: 3 | RNVC: 2
NNP5340848425324: RNCC: 5 | RNVC: 9

5 Nov 1997

5340-14-503-0976
Block Fairlead

145030976
NO PRIMARY REF14-503-0976: RNCC: 3 | RNVC: 2
011040160000: RNCC: 5 | RNVC: 2

7 Jan 1998

5340-14-513-1260
Case Corner

145131260
330A22-2244-23: RNCC: 3 | RNVC: 2

5 Mar 1999

5340-14-367-5672
Control Rod

143675672
B10279-40: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-409-0990
Mending Plate

144090990
9760-111: RNCC: 3 | RNVC: 9

16 Apr 1986

5340-14-343-5367
Rim Lock Set

143435367
64-40MM: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-485-0182
Mounting Plate

144850182
3BM01289AAAA: RNCC: 3 | RNVC: 2
3BM01289AAAA: RNCC: 5 | RNVC: 9

19 Dec 1996

5340-14-356-2447
Loop Clamp

143562447
0855807500: RNCC: 3 | RNVC: 2
0855807500: RNCC: 5 | RNVC: 9

25 Apr 1979

5340-14-513-8817
Access Cover

145138817
710335: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-541-2823
Plug Button

145412823
0805034E03: RNCC: 3 | RNVC: 2

27 May 2004

5340-14-405-2381
Anchor Strap

144052381
005980005P: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-362-9606
Access Cover

143629606
26044760: RNCC: 3 | RNVC: 2
26044760: RNCC: 3 | RNVC: 9

3 Apr 1980

5340-14-408-1976
Access Cover

144081976
BTH331121: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-425-1397
Rod End Clevis

144251397
0742528L00: RNCC: 3 | RNVC: 2

22 Jun 1988

5340-14-291-3051
Access Cover

142913051
20755: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-513-1091
Loop Clamp

145131091
E27852BP055055Y: RNCC: 2 | RNVC: 2

3 Mar 1999

5340-14-514-1771
Loop Clamp

145141771
15271-2325-0: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-14-541-1502
Mounting Bracket

145411502
210282-3: RNCC: 3 | RNVC: 2

14 May 2004

5340-14-363-8754
Quick Release Pin

143638754
S11453: RNCC: 3 | RNVC: 9
11453: RNCC: 5 | RNVC: 9

7 Aug 1980

5340-14-202-5358
Loop Clamp

142025358
45N14-5: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-544-3227
Mounting Bracket

145443227
0 363 02 024 0: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-14-478-0127
Loop Clamp

144780127
211900950: RNCC: 3 | RNVC: 2
Z00.N7141290300: RNCC: 5 | RNVC: 2
21P9.5: RNCC: 5 | RNVC: 2

4 Oct 1995

5340-14-438-8379
Rod End Connector

144388379
TB3040207: RNCC: 3 | RNVC: 2

9 Apr 1990

5340-14-514-0777
Pawl Fastener Set

145140777
PM1A005001N29: RNCC: 3 | RNVC: 2
PM1A005001N29: RNCC: 5 | RNVC: 2
MJCM: RNCC: 5 | RNVC: 9

22 Apr 1999

5340-14-453-6994
Mounting Bracket

144536994
TH20G1371-1: RNCC: 3 | RNVC: 2

5 Mar 1992

5340-14-419-0460
Retaining Strap

144190460
4-455610: RNCC: 3 | RNVC: 9
4-455610: RNCC: 5 | RNVC: 2
4-455610: RNCC: 5 | RNVC: 9

30 Sep 1987

5340-14-234-7418
Mounting Bracket

142347418
A-05-118: RNCC: 3 | RNVC: 2

18 Jan 1995

5340-14-324-4780
Quick Release Pin

143244780
A55997: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-530-8169
Lock Bolt

145308169
S-MCL1.2T: RNCC: 3 | RNVC: 2
SYB5435: RNCC: 5 | RNVC: 2

8 Jul 2002

5340-14-438-7587
Clamping Catch

144387587
TB3011212: RNCC: 3 | RNVC: 2

4 Apr 1990

5340-14-445-4586
Quick Release Pin

144454586
AMD5648: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-472-9917
Angle Bracket

144729917
27108400-1: RNCC: 3 | RNVC: 2

23 Nov 1994

5340-14-367-6609
Quick Release Pin

143676609
BLS12R29N: RNCC: 3 | RNVC: 2
BLS12R29N: RNCC: 5 | RNVC: 2
BLS12R29N: RNCC: 5 | RNVC: 2

19 Jan 1981

5340-14-473-5655
Mounting Bracket

144735655
401 10 R 231 3101 J: RNCC: 3 | RNVC: 9

31 Dec 1994

5340-14-495-4085
Mounting Plate

144954085
J90478-6: RNCC: 3 | RNVC: 2
F300 0T 019 2152: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-447-9954
Pawl Fastener

144479954
M4ZS644D5240: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-426-3182
Retaining Clip

144263182
23124919-6: RNCC: 3 | RNVC: 2

23 Aug 1988

5340-14-460-8693
Mounting Plate

144608693
2-25147: RNCC: 3 | RNVC: 2

10 Feb 1993

5340-14-442-6609
Bow Handle

144426609
2387: RNCC: 3 | RNVC: 2

24 Oct 1990

5340-14-513-8552
Mounting Plate

145138552
639746: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-509-9759
Buckle

145099759
54272A: RNCC: 3 | RNVC: 2
5340AA1130890: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-513-3576
Mounting Bracket

145133576
N5572810: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-14-378-6120
Retaining Strap

143786120
19303719: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-502-5372
Runner

145025372
5000810578: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-466-1678
Loop Clamp

144661678
166061: RNCC: 3 | RNVC: 2
89170164: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-512-5841
Mounting Bracket

145125841
3BM04698AAAA: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-418-0753
Access Cover

144180753
1013073904: RNCC: 3 | RNVC: 2
DAH1013073904: RNCC: 5 | RNVC: 9

6 Aug 1987

5340-14-399-1181
Angle Bracket

143991181
5000714426: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-550-4185
Mounting Bracket

145504185
2714575690: RNCC: 3 | RNVC: 2

20 Jun 2006

5340-14-392-7658
Angle Bracket

143927658
231314: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-550-0580
Mounting Bracket

145500580
F1260542: RNCC: 3 | RNVC: 2

31 May 2006

5340-14-342-4992
Retaining Strap

143424992
530401: RNCC: 3 | RNVC: 2

16 May 1977

5340-14-224-5935
Mending Plate

142245935
F3PM25: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-465-7977
Lock-Release Lever

144657977
7502-0650: RNCC: 3 | RNVC: 2

14 Oct 1993

5340-14-264-1731
Loop Clamp

142641731
55219-308D507DB: RNCC: 3 | RNVC: 2
55219-308N: RNCC: 5 | RNVC: 2
55219-308-001DB: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-455-7686
Detent Plunger

144557686
23924805-5: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-389-5120
Pipe Hanger

143895120
365A75-2325-20: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-367-6542
Strap Fastener Loop

143676542
AB511: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-465-2170
Access Cover

144652170
393703: RNCC: 3 | RNVC: 2
393703-001: RNCC: 5 | RNVC: 9

15 Sep 1993

5340-14-246-1922
Casement Fastener

142461922
48354: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-409-6994
Bow Handle

144096994
19-7-3527: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-462-1746
Access Cover

144621746
MAT464-0010-01CL000C0174: RNCC: 3 | RNVC: 2

13 Apr 1993

5340-14-488-1441
Locking Stay

144881441
51201: RNCC: 3 | RNVC: 2
91712076: RNCC: 5 | RNVC: 2
228-8426: RNCC: 5 | RNVC: 2
SYB3530: RNCC: 5 | RNVC: 2
F300 0T 017 2871: RNCC: 6 | RNVC: 9

18 Apr 1997

5340-14-396-2276
Quick Release Pin

143962276
219956: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-360-0003
Eye Hook

143600003
A11A767521200: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-041-9974
Pipe Hanger

140419974
121E52-150-21-0: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-518-0018
Webbing Strap

145180018
10279292-1: RNCC: 3 | RNVC: 9

21 Jan 2000

5340-14-465-1997
Mortise Lock Set

144651997
U401861855: RNCC: 3 | RNVC: 2
U401861855: RNCC: 5 | RNVC: 2

15 Sep 1993

5340-14-529-3165
Mounting Plate

145293165
241-3-3-0: RNCC: 3 | RNVC: 2

20 Mar 2002

Load More Results