What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 47 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 47 of 446

5340-14-471-5141
Support Hook

144715141
652000008: RNCC: 3 | RNVC: 2
652-8: RNCC: 5 | RNVC: 2
240-8: RNCC: 5 | RNVC: 9

31 Aug 1994

5340-14-479-8916
Cushioning Pad

144798916
44035976: RNCC: 3 | RNVC: 2
44035976: RNCC: 5 | RNVC: 9

13 Feb 1996

5340-14-513-4609
Angle Bracket

145134609
0264703260: RNCC: 3 | RNVC: 2
AX16209: RNCC: 5 | RNVC: 2

17 Mar 1999

5340-14-554-3271
Mounting Plate

145543271
82373994000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-573-8344
Utility Resilient Mount

145738344
P11120: RNCC: 3 | RNVC: 2
S10075: RNCC: 5 | RNVC: 2

13 Nov 2012

5340-14-529-8625
Utility Access Door

145298625
PORTE94951X00: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-481-3453
Loop Clamp

144813453
34 64 20: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-439-7720
Access Cover

144397720
0249207230: RNCC: 3 | RNVC: 2

23 May 1990

5340-14-481-1108
Plug Button

144811108
37264: RNCC: 3 | RNVC: 2

18 Apr 1996

5340-14-440-2893
Access Cover

144402893
39533985: RNCC: 3 | RNVC: 2
39533985: RNCC: 5 | RNVC: 9

11 Jul 1990

5340-14-526-8385
Mounting Bracket

145268385
5938090023: RNCC: 3 | RNVC: 2

7 Sep 2001

5340-14-523-5169
Mounting Bracket

145235169
31024928: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-14-412-4785
Access Cover

144124785
22446259: RNCC: 3 | RNVC: 2
22446259: RNCC: 5 | RNVC: 9

15 Oct 1986

5340-14-496-3866
Access Cover

144963866
194245: RNCC: 3 | RNVC: 2
F300 0T 021 4744: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-226-6601
Rod End Clevis

142266601
8095738: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-335-8970
Anchor Strap

143358970
184752: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-532-4838
Access Cover

145324838
203300143: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-14-475-6268
Access Cover

144756268
79133854: RNCC: 3 | RNVC: 2
F300 0T 019 4038: RNCC: 6 | RNVC: 9

21 Apr 1995

5340-14-541-8608
Angle Bracket

145418608
10713153: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-486-5124
Retaining Strap

144865124
10239445: RNCC: 3 | RNVC: 2

21 Mar 1997

5340-14-553-5795
Access Cover

145535795
44039179: RNCC: 3 | RNVC: 2

18 Apr 2007

5340-14-536-0184
Rim Lock

145360184
027510444: RNCC: 3 | RNVC: 2

8 Jul 2003

5340-14-418-2707
Support Hook

144182707
D02903: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-446-1306
Mounting Bracket

144461306
600063: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-468-0794
Mounting Plate

144680794
LYN008055040320: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-548-4378
Loop Clamp

145484378
EN4113S14NH: RNCC: 2 | RNVC: 2

17 Jan 2006

5340-14-428-6265
Block Clamp

144286265
LB10111556017: RNCC: 3 | RNVC: 2
10111556017: RNCC: 5 | RNVC: 2

8 Dec 1988

5340-14-447-1600
Loop Clamp

144471600
39537999: RNCC: 3 | RNVC: 2
39537999: RNCC: 5 | RNVC: 9

3 May 1991

5340-14-040-0173
Retaining Strap

140400173
0249927640: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-516-2940
Stand Base

145162940
DA1S202732171: RNCC: 3 | RNVC: 2

17 Sep 1999

5340-14-433-0256
Support Hook

144330256
402404V: RNCC: 3 | RNVC: 2

5 Jul 1989

5340-14-542-2951
Metal Grille

145422951
970800108: RNCC: 3 | RNVC: 2
970800108: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-502-5967
Loop Clamp

145025967
5005005079: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-509-0211
Mounting Plate

145090211
FH152006200: RNCC: 3 | RNVC: 2

14 Oct 1998

5340-14-439-6828
Mounting Bracket

144396828
16776394: RNCC: 3 | RNVC: 2

16 May 1990

5340-14-530-6867
Cover Strip

145306867
T524A2001515: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-546-1786
Angle Bracket

145461786
RA1B701376011: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-548-6141
Angle Bracket

145486141
RA1B702506191: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-402-4766
Door Handle

144024766
1911GAUCHE: RNCC: 3 | RNVC: 2
1300644G0102: RNCC: 5 | RNVC: 2
E023612: RNCC: 5 | RNVC: 9
1300644G0102: RNCC: 5 | RNVC: 9

3 Jul 1985

5340-14-392-7003
Retaining Strap

143927003
5000011268: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-523-2162
Pipe Hanger

145232162
RA1B702736115N1: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-461-8517
Synchro Clamp

144618517
R300100908: RNCC: 3 | RNVC: 2
R300100908: RNCC: 3 | RNVC: 9
300100908: RNCC: 5 | RNVC: 9

31 Mar 1993

5340-14-517-6472
Mounting Bracket

145176472
CRM280730411: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-476-6811
Buckle

144766811
34201-401: RNCC: 3 | RNVC: 2
1044988K00: RNCC: 5 | RNVC: 2

28 Jun 1995

5340-14-502-7466
Mounting Bracket

145027466
5R5597: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-556-0968
Mounting Plate

145560968
10518591: RNCC: 3 | RNVC: 2

29 Jan 2008

5340-14-314-4706
Retaining Strap

143144706
177377: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-461-7572
Bumper

144617572
SHS1J0112A: RNCC: 3 | RNVC: 2

24 Mar 1993

5340-14-543-7464
Mounting Plate

145437464
83300100: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-14-464-1491
Mounting Bracket

144641491
ST406M41P170: RNCC: 3 | RNVC: 2

15 Jul 1993

5340-14-518-1323
Self-Locking Insert

145181323
5000788607: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-522-6863
Mounting Plate

145226863
H0UV02: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-14-348-2160
Retaining Strap

143482160
555235: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-488-5659
Loop Clamp

144885659
SUPPO92329A00: RNCC: 3 | RNVC: 2
SUPPO92329X00: RNCC: 5 | RNVC: 9

21 May 1997

5340-14-484-3392
Vent Plug

144843392
TRM34: RNCC: 3 | RNVC: 2
TRM34: RNCC: 5 | RNVC: 2

9 Nov 1996

5340-14-505-6912
Mounting Bracket

145056912
A49266: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-367-1310
Bumper

143671310
3437: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-349-3587
Control Rod

143493587
NRA113: RNCC: 3 | RNVC: 9
RASNRA113: RNCC: 5 | RNVC: 9

22 May 1978

5340-14-537-3207
Angle Bracket

145373207
052656 K6111 0026: RNCC: 3 | RNVC: 2

20 Oct 2003

5340-14-535-2616
Angle Bracket

145352616
RA1M701916111: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-512-9153
Metal Grille

145129153
562398: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-419-9157
Retaining Strap

144199157
160G6X9: RNCC: 3 | RNVC: 2

10 Nov 1987

5340-14-518-9489
Webbing Strap

145189489
TPS1A1026C: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-551-8694
Retaining Band

145518694
0025651: RNCC: 3 | RNVC: 2

3 Nov 2006

5340-14-516-6889
Mounting Bracket

145166889
56096596: RNCC: 3 | RNVC: 2

12 Oct 1999

5340-14-511-9052
Door Holder

145119052
94166734: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-14-392-9810
Angle Bracket

143929810
0000784624: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-431-9423
Runner

144319423
134C38095T2: RNCC: 3 | RNVC: 2

16 May 1989

5340-14-550-4979
Mounting Bracket

145504979
6801DOC232: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-531-8588
Mounting Bracket

145318588
19A440: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-14-403-5156
Retaining Clip

144035156
C03: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-410-4887
Mending Plate

144104887
044U13-599656W: RNCC: 3 | RNVC: 2

2 Jul 1986

5340-14-549-5642
Expansion Shield

145495642
230771: RNCC: 3 | RNVC: 2

14 Apr 2006

5340-14-337-6636
Bumper

143376636
0556138500: RNCC: 3 | RNVC: 2
0556138500: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-14-401-1891
Runner

144011891
79089779: RNCC: 3 | RNVC: 2
79089779: RNCC: 5 | RNVC: 9

29 May 1985

5340-14-409-3398
Retaining Strap

144093398
601567: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-392-9442
Access Cover

143929442
0000164063: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-459-8564
Mounting Bracket

144598564
P76139: RNCC: 3 | RNVC: 2

17 Dec 1992

5340-14-456-5948
Access Cover

144565948
644163: RNCC: 3 | RNVC: 2

9 Jul 1992

5340-14-518-2016
Runner

145182016
434426: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-531-7984
Synchro Clamp

145317984
09400015: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-439-6860
Mounting Bracket

144396860
16293699: RNCC: 3 | RNVC: 2
16293699: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-358-5406
Retaining Strap

143585406
114083009: RNCC: 3 | RNVC: 2
114083009: RNCC: 5 | RNVC: 2

7 Sep 1979

5340-14-346-7953
Angle Bracket

143467953
4770101150: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-14-549-2562
Self-Locking Insert

145492562
0376-04-10: RNCC: 3 | RNVC: 2

15 Mar 2006

5340-14-301-4466
Butt Hinge

143014466
P26-306-140X50DS0UDEEAC: RNCC: 2 | RNVC: 2

1 Jan 1973

5340-14-345-2860
Loop Clamp

143452860
105038003301: RNCC: 3 | RNVC: 2
105038003301: RNCC: 5 | RNVC: 2

5 Oct 1977

5340-14-427-5116
Utility Access Door

144275116
NO PRIMARY REF14-427-5116: RNCC: 3 | RNVC: 2
20551: RNCC: 5 | RNVC: 9

20 Oct 1988

5340-14-426-6722
Mounting Plate

144266722
639101013: RNCC: 3 | RNVC: 2
89416244: RNCC: 5 | RNVC: 2
639101013: RNCC: 5 | RNVC: 9

15 Sep 1988

5340-14-518-6698
Mounting Bracket

145186698
10551281: RNCC: 3 | RNVC: 2

11 Feb 2000

5340-14-542-7060
Butt Hinge

145427060
0502503: RNCC: 3 | RNVC: 2

28 Jul 2004

5340-14-412-8632
Retaining Strap

144128632
ST406M52P638: RNCC: 3 | RNVC: 2

5 Nov 1986

5340-14-412-8485
Angle Bracket

144128485
BA18129: RNCC: 3 | RNVC: 2
245717: RNCC: 5 | RNVC: 2

5 Nov 1986

5340-14-532-8287
Mounting Plate

145328287
0260621490: RNCC: 3 | RNVC: 2

18 Dec 2002

5340-14-504-2713
Mounting Bracket

145042713
3612908M91: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-042-9099
Angle Bracket

140429099
A21A221276181: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-547-6783
Mounting Bracket

145476783
086124G: RNCC: 3 | RNVC: 2

26 Oct 2005

5340-14-489-9740
Mounting Plate

144899740
1301300P001: RNCC: 3 | RNVC: 2

3 Sep 1997

5340-14-445-5053
Retaining Strap

144455053
ST406M52P711: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-206-9153
Loop Clamp

142069153
51213105025: RNCC: 3 | RNVC: 2
20G25: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-530-6866
Cover Strip

145306866
T524A2001527: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-326-4104
Rod End Clevis

143264104
26328769: RNCC: 3 | RNVC: 2
C328769: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-407-7492
Loop Clamp

144077492
31934: RNCC: 3 | RNVC: 2
91743846: RNCC: 5 | RNVC: 2

3 Mar 1986

5340-14-380-1536
Angle Bracket

143801536
536485: RNCC: 3 | RNVC: 2
00536485: RNCC: 5 | RNVC: 2

8 Nov 1982

5340-14-416-1160
Bumper

144161160
206991: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-520-2703
Mounting Plate

145202703
734990: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-419-7269
Retaining Strap

144197269
TLH0TM108: RNCC: 3 | RNVC: 2

5 Nov 1987

5340-14-550-0515
Access Cover

145500515
45271862: RNCC: 3 | RNVC: 2

31 May 2006

5340-14-519-6330
Mounting Plate

145196330
009938010P: RNCC: 3 | RNVC: 2

27 Mar 2000

5340-14-477-7454
Control Rod

144777454
1063227G00: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-14-517-0148
Angle Bracket

145170148
RA1M796351020: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-480-7030
Access Cover

144807030
46159456: RNCC: 3 | RNVC: 2

27 Mar 1996

5340-14-292-1558
Detent Plunger

142921558
301MA0100REP1: RNCC: 3 | RNVC: 2
301MA100REP1: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-428-2398
Webbing Strap

144282398
16379469: RNCC: 3 | RNVC: 2
16379469: RNCC: 5 | RNVC: 9

8 Dec 1988

5340-14-413-9690
Loop Clamp

144139690
ST400S60P179: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-464-3144
Angle Bracket

144643144
5260600: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-518-0205
Bridge Clamp

145180205
5010118412: RNCC: 3 | RNVC: 2

21 Jan 2000

5340-14-230-1133
Loop Clamp

142301133
51211905020: RNCC: 3 | RNVC: 2
20P20: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-530-3233
Surface Bolt

145303233
39339564: RNCC: 3 | RNVC: 2

29 May 2002

5340-14-551-9226
Mounting Plate

145519226
43044016: RNCC: 3 | RNVC: 2
43044016: RNCC: 3 | RNVC: 9

9 Nov 2006

5340-14-456-5928
Access Cover

144565928
620301: RNCC: 3 | RNVC: 2

9 Jul 1992

5340-14-548-1045
Angle Bracket

145481045
RA1A701636851: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-474-8851
Retaining Strap

144748851
16380214: RNCC: 3 | RNVC: 2
16380214: RNCC: 5 | RNVC: 9

8 Mar 1995

5340-14-544-3268
Mounting Bracket

145443268
22355-868: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-14-379-7443
Anchor Strap

143797443
0101-182: RNCC: 3 | RNVC: 2
0101-182: RNCC: 5 | RNVC: 2
0101-182: RNCC: 5 | RNVC: 2

20 Oct 1982

5340-14-476-0428
Loop Clamp

144760428
5000820412: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-553-1369
Mounting Bracket

145531369
0249960300: RNCC: 3 | RNVC: 2

6 Mar 2007

5340-14-511-6406
Angle Bracket

145116406
47011460: RNCC: 3 | RNVC: 9

6 Jan 1999

5340-14-446-6706
Dashpot

144466706
B15043044: RNCC: 3 | RNVC: 2

9 Apr 1991

5340-14-374-6054
Retaining Strap

143746054
0035651074: RNCC: 3 | RNVC: 2
0035651074: RNCC: 5 | RNVC: 9
35651074: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-390-7584
Retaining Strap

143907584
5000606983: RNCC: 3 | RNVC: 2

1 Mar 1984

5340-14-535-6994
Butt Hinge

145356994
15230550: RNCC: 3 | RNVC: 2

18 Jun 2003

5340-14-474-7009
Loop Clamp

144747009
006H679: RNCC: 3 | RNVC: 2
006H679: RNCC: 5 | RNVC: 2

27 Feb 1995

5340-14-351-5302
Lock-Release Lever

143515302
A9818: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-518-6029
Mounting Plate

145186029
5010090432: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-548-5622
Access Cover

145485622
5010429760: RNCC: 3 | RNVC: 2

26 Jan 2006

5340-14-504-2924
Retaining Strap

145042924
3641862M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-548-4387
Runner

145484387
TR97205: RNCC: 3 | RNVC: 2

17 Jan 2006

5340-14-500-6459
Section Block Clamp

145006459
E64009998001: RNCC: 3 | RNVC: 2
F300 0T 024 6645: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-531-1486
Loop Clamp

145311486
TB4011103: RNCC: 3 | RNVC: 2

24 Jul 2002

5340-14-528-5330
Angle Bracket

145285330
45707718: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-407-2366
Butt Hinge

144072366
10270-284: RNCC: 3 | RNVC: 9
89408334: RNCC: 5 | RNVC: 2

12 Feb 1986

5340-14-545-4465
Cover Strip

145454465
RA1B701916536A1N1: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-308-5103
Threaded Rod End

143085103
70019526: RNCC: 3 | RNVC: 2
77654: RNCC: 3 | RNVC: 2
77657-CUAL9NI3FE2: RNCC: 3 | RNVC: 2
70019526: RNCC: 5 | RNVC: 9
77657-CUAL9NI3FE2: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-494-5821
Access Cover

144945821
800 820 192: RNCC: 3 | RNVC: 2
F300 0T 017 5076: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-543-9639
Mounting Plate

145439639
4773126990: RNCC: 3 | RNVC: 9

19 Dec 2004

5340-14-418-7601
Cushioning Pad

144187601
06544290: RNCC: 3 | RNVC: 2
70041993: RNCC: 3 | RNVC: 2
06544290: RNCC: 5 | RNVC: 9
70041993: RNCC: 5 | RNVC: 9

15 Sep 1987

5340-14-358-2364
Bumper

143582364
5000497915: RNCC: 3 | RNVC: 2
5000497915: RNCC: 5 | RNVC: 9

13 Aug 1979

5340-14-478-2225
Synchro Clamp

144782225
A4H5165: RNCC: 3 | RNVC: 2
0149317T00: RNCC: 5 | RNVC: 2

18 Oct 1995

5340-14-530-5380
Loop Clamp

145305380
ASNA0021-21P08: RNCC: 1 | RNVC: 2
ASNA0021-21P08: RNCC: 3 | RNVC: 2
ASNA0021-21P08: RNCC: 3 | RNVC: 2
ASNA0021-21P08: RNCC: 5 | RNVC: 2
A0021-21P08: RNCC: 5 | RNVC: 2
A0021-21P08: RNCC: 5 | RNVC: 2
A0021-21P08: RNCC: 5 | RNVC: 2
ASNA0021-21P08: RNCC: 5 | RNVC: 2

18 Jun 2002

5340-14-508-6618
Mounting Plate

145086618
JGA05-41: RNCC: 3 | RNVC: 2

23 Sep 1998

5340-14-537-0999
Strap Fastener Loop

145370999
12947K: RNCC: 3 | RNVC: 2
FS0000143: RNCC: 6 | RNVC: 9

29 Sep 2003

5340-14-403-4840
Support Hook

144034840
P4H020335-02: RNCC: 3 | RNVC: 9

21 Aug 1985

5340-14-281-2198
Rod End Connector

142812198
10100091: RNCC: 3 | RNVC: 2
10100091: RNCC: 5 | RNVC: 2
CHR10100091: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-230-7324
Handwheel

142307324
GSM137-001F16-3N1: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-425-7353
Block Clamp

144257353
91432B16-12-16B78: RNCC: 3 | RNVC: 2

21 Jul 1988

5340-14-437-1017
Retaining Strap

144371017
424-91057-000: RNCC: 3 | RNVC: 2

17 Jan 1990

5340-14-543-4198
Angle Bracket

145434198
LA9-FJ982: RNCC: 3 | RNVC: 2

27 Oct 2004

5340-14-288-7408
Loop Clamp

142887408
02-26-01-30: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-432-1509
Corner Brace

144321509
NO PRIMARY REF14-432-1509: RNCC: 3 | RNVC: 2
3511-318-03901: RNCC: 5 | RNVC: 9

24 May 1989

5340-14-553-8865
Access Cover

145538865
23825514-00: RNCC: 3 | RNVC: 2
23825514-7: RNCC: 5 | RNVC: 2

29 May 2007

5340-14-424-2132
Locking Stay

144242132
8756-04: RNCC: 3 | RNVC: 2
7920041727: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-549-8673
Mounting Bracket

145498673
2093182-001: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-468-8111
Support Hook

144688111
160R742823-08: RNCC: 3 | RNVC: 2

23 Mar 1994

5340-14-465-1690
Angle Bracket

144651690
365A61-8341-21: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-364-4184
Corner Brace

143644184
330A58-3700-205: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-506-4480
Key Chain And Reel

145064480
NO PRIMARY REF 14-506-4480: RNCC: 3 | RNVC: 2
AB2: RNCC: 5 | RNVC: 2

29 Apr 1998

5340-14-260-0909
Lock Bolt

142600909
321A86-0069-00: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-371-6459
Retaining Strap

143716459
S258282-2: RNCC: 3 | RNVC: 2
85-691-0911: RNCC: 6 | RNVC: 9

5 Aug 1981

5340-14-318-5083
Loop Clamp

143185083
CV15-409540-1: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-424-8982
Angle Bracket

144248982
9970-125-691: RNCC: 3 | RNVC: 2

9 Jun 1988

5340-14-262-3695
Threaded Rod End

142623695
175-26-217: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-397-5513
Bow Handle

143975513
11501-027: RNCC: 3 | RNVC: 2
389299: RNCC: 5 | RNVC: 2

14 Dec 1984

5340-14-315-0352
Mounting Plate

143150352
NO PRIMARY REF14-315-0352: RNCC: 3 | RNVC: 2
64H0010DET9: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-532-3961
Angle Bracket

145323961
78703-048G: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-413-7648
Loop Clamp

144137648
A0021-31F18: RNCC: 3 | RNVC: 2

15 Jan 1987

5340-14-282-5379
Angle Bracket

142825379
50261-19: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-481-0220
Runner

144810220
52.154.M.101: RNCC: 3 | RNVC: 2

18 Apr 1996

5340-14-303-3003
Strap Fastener Loop

143033003
000775007P: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-303-4967
Anchor Strap

143034967
NO PRIMARY REF14-303-4967: RNCC: 3 | RNVC: 2
48-02-30-093: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-405-5234
Rod End Clevis

144055234
J05107-02-2410P005: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-304-3652
Loop Clamp

143043652
61-71-04: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-372-2350
Mortise Lock Set

143722350
3781G01: RNCC: 3 | RNVC: 2
5000560928: RNCC: 5 | RNVC: 2
5000560928: RNCC: 5 | RNVC: 9

1 Sep 1981

5340-14-444-8742
Rod End Connector

144448742
123805114: RNCC: 3 | RNVC: 9

28 Jan 1991

5340-14-398-6467
Doorknob

143986467
700-16-AP-L80: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-484-9716
Cover Strip

144849716
332A54-1121-24: RNCC: 3 | RNVC: 2

12 Dec 1996

5340-14-378-9301
Rod End Connector

143789301
219893: RNCC: 3 | RNVC: 2
MAF0001004807: RNCC: 6 | RNVC: 9

6 Sep 1982

5340-14-526-5281
Clamp Bolt Assembly

145265281
S3SD18129-75: RNCC: 3 | RNVC: 2
S3SD18129-75: RNCC: 5 | RNVC: 2

1 Aug 2001

5340-14-507-2499
Access Cover

145072499
452-16205-000: RNCC: 3 | RNVC: 2
452-16205-000: RNCC: 5 | RNVC: 2

24 Jun 1998

5340-14-353-6407
Bumper

143536407
C32BB0101-512: RNCC: 3 | RNVC: 2
C32BB0101-512: RNCC: 5 | RNVC: 2
C32BB0101-512: RNCC: 5 | RNVC: 9

16 Jan 1979

5340-14-284-6561
Angle Bracket

142846561
12504813: RNCC: 3 | RNVC: 2
12504813: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-346-0479
Retaining Strap

143460479
021057601101: RNCC: 3 | RNVC: 2
021057601101: RNCC: 5 | RNVC: 2

5 Nov 1977

5340-14-519-4783
Loop Clamp

145194783
11313109017: RNCC: 3 | RNVC: 2
432232: RNCC: 5 | RNVC: 9

22 Mar 2000

5340-14-521-1208
Loop Clamp

145211208
0022111104: RNCC: 3 | RNVC: 2

11 Jul 2000

5340-14-475-0333
Angle Bracket

144750333
059661A01TRA: RNCC: 3 | RNVC: 2
059661A: RNCC: 5 | RNVC: 2

16 Mar 1995

5340-14-406-0646
Retaining Strap

144060646
1141100: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-356-1097
Rod End Clevis

143561097
GSM482-006F12: RNCC: 3 | RNVC: 2

5 Apr 1979

5340-14-530-9404
Angle Bracket

145309404
47217602: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-14-551-2767
Angle Bracket

145512767
RA1M706535121: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-532-5203
Mounting Bracket

145325203
330A64-1100-0001: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-14-552-4750
Block Clamp

145524750
S881A9601224: RNCC: 3 | RNVC: 2

8 Jan 2007

5340-14-323-6453
Tubular Fairlead

143236453
FA1949: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-338-7417
Retaining Strap

143387417
512780: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-520-7375
Arched Cushion

145207375
MAT169-0027F19DE76: RNCC: 3 | RNVC: 2

6 Jun 2000

5340-14-312-8498
Cover Strip

143128498
160-12046-21: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-430-9346
Angle Bracket

144309346
G230010-13: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-14-366-8194
Runner

143668194
970586: RNCC: 3 | RNVC: 2
970586: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-518-6221
Angle Bracket

145186221
5010230894: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-335-8610
Angle Bracket

143358610
5000080353: RNCC: 3 | RNVC: 2
5000080353: RNCC: 5 | RNVC: 9

24 Jul 1976

5340-14-515-2344
Angle Bracket

145152344
3533634202: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-386-8157
Angle Bracket

143868157
216-00B28377: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-508-7757
Rod End Clevis

145087757
BS2842.132.00.000: RNCC: 3 | RNVC: 2
BS2842-132-00-000: RNCC: 5 | RNVC: 9

30 Sep 1998

5340-14-523-6289
Mounting Plate

145236289
A3240470: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-483-1104
T Bracket

144831104
ALZ084055014020: RNCC: 3 | RNVC: 2

8 Aug 1996

5340-14-550-9059
Section Block Clamp

145509059
RA1B701964331: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-541-7940
Protection Bellows

145417940
E64310000053: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-531-1458
Mounting Bracket

145311458
TB1010101F247: RNCC: 3 | RNVC: 2

24 Jul 2002

5340-14-551-3506
Angle Bracket

145513506
RA1M705424111N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-438-5976
Mending Plate

144385976
TB1030416: RNCC: 3 | RNVC: 2

28 Mar 1990

5340-14-424-2270
Expansion Plug

144242270
7703075044: RNCC: 3 | RNVC: 2

19 May 1988

5340-14-495-9393
Retaining Clip

144959393
A016-21: RNCC: 3 | RNVC: 2
AA03-02: RNCC: 5 | RNVC: 2
F300 0T 020 5462: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-285-2760
Retaining Strap

142852760
6105-1421: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-473-3436
Section Block Clamp

144733436
F702-29-01: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-440-3457
Mounting Bracket

144403457
332A81-0387-20: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-519-3017
Mounting Bracket

145193017
332A87-0963-01: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-473-4332
Pipe Hanger

144734332
VIP-163N: RNCC: 3 | RNVC: 2

31 Dec 1994

5340-14-510-8666
Access Cover

145108666
309-022-001-0: RNCC: 3 | RNVC: 2

18 Nov 1998

5340-14-280-0556
Loop Clamp

142800556
51213102012: RNCC: 3 | RNVC: 2
20G12: RNCC: 5 | RNVC: 2
A0021-20G12: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-329-5224
Rod End Clevis

143295224
PAA15-26-004: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-503-6491
Angle Bracket

145036491
365A27-3610-3401: RNCC: 3 | RNVC: 2

21 Jan 1998

5340-14-550-4902
Angle Bracket

145504902
RA1M704855311N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-533-5381
Mounting Bracket

145335381
192E348-00: RNCC: 3 | RNVC: 2

10 Feb 2003

5340-14-463-8836
Mounting Plate

144638836
365A61-8033-22: RNCC: 3 | RNVC: 2
85-695-0102: RNCC: 6 | RNVC: 9

30 Jun 1993

5340-14-394-1524
Butt Hinge

143941524
4003-20X2000INOX: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-468-0664
Mounting Bracket

144680664
312-16223-503: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-365-3514
Butt Hinge

143653514
330A09-0625-20: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-456-1939
Retaining Bail

144561939
MAT162-0047F1: RNCC: 3 | RNVC: 2

18 Jun 1992

5340-14-259-8800
Rod End Clevis

142598800
321A27-0666-21: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-336-1895
Runner

143361895
253-5M366P84: RNCC: 3 | RNVC: 9
PA253-5M366P84: RNCC: 5 | RNVC: 9

24 Jul 1976

5340-14-217-9038
Door Handle

142179038
3160S25-02-120: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-482-9232
Pipe Hanger

144829232
78732-025-022B: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-432-2562
Clamping Catch

144322562
A0H25898R25: RNCC: 3 | RNVC: 2
51-L7-1BF-79561: RNCC: 5 | RNVC: 2
A0H25898R25-79561: RNCC: 5 | RNVC: 2

31 May 1989

5340-14-423-9148
Webbing Strap

144239148
852-50VERT0TAN: RNCC: 3 | RNVC: 2

5 May 1988

5340-14-431-1379
Shimmy Damper

144311379
0177-02-02-05: RNCC: 3 | RNVC: 2

7 Apr 1989

5340-14-310-6291
Retaining Strap

143106291
15890-103106: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-531-2093
Mounting Bracket

145312093
341A22-1001-65: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-468-0683
Retaining Strap

144680683
312-04035-001: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-449-3941
Cover Strip

144493941
MY20551-3059: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-529-6722
Mounting Plate

145296722
457-12874-000: RNCC: 3 | RNVC: 2

4 Apr 2002

5340-14-361-2414
Bow Handle

143612414
C01520-09: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-325-8449
Rigid Caster

143258449
509-5PHR: RNCC: 3 | RNVC: 9
91352728: RNCC: 5 | RNVC: 2
MPR509-5PHR: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-319-0699
Retaining Band

143190699
NO PRIMARY REF14-319-0699: RNCC: 3 | RNVC: 2
213503: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-445-4309
Rigid Caster

144454309
330A58-1130-03: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-296-3538
Angle Bracket

142963538
CAP10-20-09-042: RNCC: 3 | RNVC: 9

1 Jan 1973

5340-14-511-6252
Pipe Hanger

145116252
78733-050-035B: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-495-2298
Mounting Bracket

144952298
NO PRIMARY REF14-495-2298: RNCC: 3 | RNVC: 2
8209856: RNCC: 5 | RNVC: 9
F300 0T 018 6681: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-451-3155
Retaining Strap

144513155
MY20241-3750810: RNCC: 3 | RNVC: 2

6 Nov 1991

5340-14-297-6776
Door Handle

142976776
1127-10: RNCC: 3 | RNVC: 2
1127-10: RNCC: 5 | RNVC: 2
1127-10: RNCC: 5 | RNVC: 9
85-681-0900: RNCC: 6 | RNVC: 9

1 Jan 1973

5340-14-450-6041
Hand Crank Arm

144506041
R37015-28: RNCC: 3 | RNVC: 9

15 Oct 1991

5340-14-511-2583
Runner

145112583
241926: RNCC: 3 | RNVC: 2
241926-001: RNCC: 5 | RNVC: 9

9 Dec 1998

5340-14-391-3443
Lock-Release Lever

143913443
676-42815-00: RNCC: 3 | RNVC: 2

1 Mar 1984

5340-14-549-9712
Mounting Bracket

145499712
EA6M701-14: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-551-7620
Mounting Bracket

145517620
APF2223-12: RNCC: 3 | RNVC: 2

20 Oct 2006

5340-14-314-6212
Loop Clamp

143146212
M3RD701-95: RNCC: 3 | RNVC: 2
M3RD701-95: RNCC: 3 | RNVC: 2
MIR3RD701-95: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-391-8234
Runner

143918234
NO PRIMARY REF14-391-8234: RNCC: 3 | RNVC: 2
X34700: RNCC: 5 | RNVC: 9

21 Mar 1984

5340-14-264-1713
Loop Clamp

142641713
55218-216D507DB: RNCC: 3 | RNVC: 2
55218-216N: RNCC: 5 | RNVC: 2
55218-216001DB: RNCC: 5 | RNVC: 2

27 Aug 1997

5340-14-370-2720
Access Cover

143702720
MBEU62340: RNCC: 3 | RNVC: 2
033297: RNCC: 5 | RNVC: 2
99-611-8920: RNCC: 6 | RNVC: 9

18 May 1981

5340-14-516-0718
Door Handle

145160718
10515435: RNCC: 3 | RNVC: 2
IF-192-6010: RNCC: 5 | RNVC: 9

8 Sep 1999

5340-14-338-3630
Retaining Strap

143383630
011-2463: RNCC: 3 | RNVC: 2
11-2463: RNCC: 5 | RNVC: 2

6 Nov 1976

5340-14-364-0335
Retaining Strap

143640335
FJ1B705-166: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-468-9954
Angle Bracket

144689954
110-633-23-12: RNCC: 3 | RNVC: 2
85-695-0162: RNCC: 6 | RNVC: 9

30 Mar 1994

5340-14-421-7526
Access Cover

144217526
045U01-623621D: RNCC: 3 | RNVC: 2
0623621D00: RNCC: 5 | RNVC: 2
89405434: RNCC: 5 | RNVC: 2

27 Jan 1988

5340-14-400-9053
Butt Hinge

144009053
FB1C294-68-07RS1: RNCC: 3 | RNVC: 2

21 May 1985

5340-14-474-1951
Mounting Bracket

144741951
688-85542-03-94: RNCC: 3 | RNVC: 2

1 Feb 1995

5340-14-209-1795
Cover Strip

142091795
3130S73-86-081: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-442-2663
Mounting Bracket

144422663
1194-00-02: RNCC: 3 | RNVC: 2

8 Oct 1990

5340-14-345-2555
Retaining Strap

143452555
FD1B721-013: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-398-1427
Mounting Bracket

143981427
355A54-3033-2101: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-560-9068
Utility Resilient Mount

145609068
E1E 3571-S05: RNCC: 3 | RNVC: 2
P74-900-017: RNCC: 5 | RNVC: 2
E1E 3571-S05: RNCC: 5 | RNVC: 2

29 May 2009

5340-14-549-3696
Mounting Plate

145493696
332A230568-22: RNCC: 3 | RNVC: 2

27 Mar 2006

5340-14-463-3577
Synchro Clamp

144633577
3511 192 44461: RNCC: 3 | RNVC: 2
3511-192-44461: RNCC: 5 | RNVC: 2

9 Jun 1993

5340-14-535-3564
Retaining Clip

145353564
060710-999-900: RNCC: 3 | RNVC: 9
7703079165: RNCC: 5 | RNVC: 2

22 May 2003

5340-14-541-1204
Blank Panel

145411204
955120-313CPV: RNCC: 3 | RNVC: 2

14 May 2004

5340-14-474-4733
Mounting Plate

144744733
110-760-25-10: RNCC: 3 | RNVC: 2

15 Feb 1995

5340-14-444-1806
Bumper

144441806
PM1A716410112: RNCC: 3 | RNVC: 2
PM1A716410112: RNCC: 5 | RNVC: 2

18 Dec 1990

5340-14-339-5833
Mending Plate

143395833
3130S82-61-005: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-288-9338
Pipe Hanger

142889338
A10-73-145-00-0: RNCC: 3 | RNVC: 2
A10-73-145-00-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-297-7043
Rod End Connector

142977043
8-940-0022: RNCC: 3 | RNVC: 2
SAF8-940-0022: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-297-4559
Rim Lock Set

142974559
J36-810ENCL0IS0NNEE60X60D: RNCC: 2 | RNVC: 2
M1-60X60DR0ITE: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-411-6893
Angle Bracket

144116893
NO PRIMARY REF14-411-6893: RNCC: 3 | RNVC: 2
P9C004006-00: RNCC: 5 | RNVC: 9

27 Aug 1986

5340-14-290-2351
Retaining Strap

142902351
330A75-9657-00: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-464-8938
Loop Clamp

144648938
PE27010-16: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-446-3930
Webbing Strap

144463930
P4C005752-01: RNCC: 3 | RNVC: 9
91970373: RNCC: 5 | RNVC: 2
F300 0T 005 2545: RNCC: 6 | RNVC: 9

19 Mar 1991

5340-14-324-8795
Retaining Band

143248795
330A87-9855-20: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-331-7924
Retaining Strap

143317924
574-408-121-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-391-7914
Detent Plunger

143917914
V2PT5011-119267: RNCC: 3 | RNVC: 2
V2PT5011-119267: RNCC: 5 | RNVC: 2

21 Mar 1984

5340-14-526-7050
Synchro Clamp

145267050
QUI-NCA-0090: RNCC: 3 | RNVC: 2

27 Aug 2001

5340-14-368-3120
Loop Clamp

143683120
L08369-57: RNCC: 3 | RNVC: 2
2134631: RNCC: 5 | RNVC: 2
2134631: RNCC: 5 | RNVC: 2

20 Feb 1981

5340-14-455-4558
Loop Clamp

144554558
51113105057: RNCC: 3 | RNVC: 2
25G57: RNCC: 5 | RNVC: 2
25G57: RNCC: 5 | RNVC: 9
85-694-3354: RNCC: 6 | RNVC: 9

21 May 1992

5340-14-308-1546
Mending Plate

143081546
330A52-0410-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-218-5747
Loop Clamp

142185747
3160S73-45-001: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-502-9990
Lock Bolt

145029990
330A22-2464-00: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-338-4327
Retaining Strap

143384327
330A75-5421-20: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-346-2698
Access Cover

143462698
300-661-401P: RNCC: 3 | RNVC: 2
001120010A: RNCC: 5 | RNVC: 2

12 Dec 1977

5340-14-330-1318
Runner

143301318
2R100078PT/B: RNCC: 3 | RNVC: 2
2R100078PT: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-449-3945
Cover Strip

144493945
MY20552-3060: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-489-9952
Loop Clamp

144899952
304-091-201-0: RNCC: 3 | RNVC: 2

3 Sep 1997

5340-14-325-6142
Loop Clamp

143256142
51215302007: RNCC: 3 | RNVC: 2
20S7: RNCC: 5 | RNVC: 2
A0021-20S07: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-454-7651
Loop Clamp

144547651
L160E0-5ALU: RNCC: 3 | RNVC: 9
702A40-0031-20: RNCC: 5 | RNVC: 2
L160E0-5ALU: RNCC: 5 | RNVC: 9

14 Apr 1992

5340-14-386-1630
Mounting Plate

143861630
6802J33-4008-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-451-8261
Swivel Caster

144518261
SP4AA100-23L25: RNCC: 3 | RNVC: 2
91711225: RNCC: 5 | RNVC: 2

4 Dec 1991

5340-14-246-6675
Rod End Clevis

142466675
1050-32-041-03-0: RNCC: 3 | RNVC: 2
32-041-03-0: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-354-3871
Bumper

143543871
21312060: RNCC: 3 | RNVC: 2
21312060-5: RNCC: 5 | RNVC: 2

31 Jan 1979

5340-14-490-1926
Loop Clamp

144901926
650-403-011-0: RNCC: 3 | RNVC: 2

17 Sep 1997

5340-14-439-8247
Mounting Bracket

144398247
332A55-1261-20: RNCC: 3 | RNVC: 2

23 May 1990

5340-14-417-1683
Butt Hinge

144171683
110-2712-00-11-01: RNCC: 3 | RNVC: 2
85-693-1879: RNCC: 6 | RNVC: 9

1 Jul 1987

5340-14-355-8803
Loop Clamp

143558803
7910009850: RNCC: 3 | RNVC: 2
7910009850: RNCC: 3 | RNVC: 2
1715-16: RNCC: 5 | RNVC: 2

5 Apr 1979

5340-14-302-8827
Access Cover

143028827
3133240: RNCC: 3 | RNVC: 2
31-3224-0: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-401-7354
Expansion Shield

144017354
77857-1HSLGBISM12-25: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-242-8801
Retaining Strap

142428801
NO PRIMARY REF14-242-8801: RNCC: 3 | RNVC: 2
0854455000: RNCC: 5 | RNVC: 2
15391-1: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-372-2449
Mortise Lock Set

143722449
U08520-07: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-324-7160
Fusible Plug

143247160
NO PRIMARY REF14-324-7160: RNCC: 3 | RNVC: 2
EX922651: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-361-9063
Loop Clamp

143619063
01-0-145A: RNCC: 3 | RNVC: 2
0855595300: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-14-533-8700
Mounting Bracket

145338700
12-875-010: RNCC: 3 | RNVC: 2
SZ12.875.010: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-394-7227
Rim Lock Set

143947227
NO PRIMARY REF14-394-7227: RNCC: 3 | RNVC: 2
6600-04FE012: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-388-8900
Angle Bracket

143888900
365A24-1153-20: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-484-5678
Rim Latch

144845678
1000U66U197U165-23-24-15: RNCC: 3 | RNVC: 2

23 Nov 1996

5340-14-344-2090
Angle Bracket

143442090
713715: RNCC: 3 | RNVC: 2
5171371500: RNCC: 5 | RNVC: 2

10 Aug 1977

5340-14-520-4109
Swivel Caster

145204109
2975U00050P3010: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-345-6696
Vent Plug

143456696
421090B: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-512-9446
Angle Bracket

145129446
94030104: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-508-9282
Access Cover

145089282
16508713: RNCC: 3 | RNVC: 2

7 Oct 1998

5340-14-424-2588
Butt Hinge

144242588
0185100600: RNCC: 3 | RNVC: 2
89414002: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-533-2629
Clamping Catch

145332629
V116628A: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-520-5899
Angle Bracket

145205899
32117130128: RNCC: 3 | RNVC: 2
SDM32117130128: RNCC: 5 | RNVC: 9

24 May 2000

5340-14-210-5602
Anchor Strap

142105602
70883056: RNCC: 3 | RNVC: 2
70883056: RNCC: 5 | RNVC: 9
883056: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-506-8610
Access Cover

145068610
D47154F: RNCC: 3 | RNVC: 2

27 May 1998

5340-14-396-0518
Anchor Strap

143960518
0000189187: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-387-8971
Rod End Clevis

143878971
43907TKD0460XA: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-537-2160
Access Cover

145372160
1559518: RNCC: 3 | RNVC: 2
8012264C00: RNCC: 5 | RNVC: 2
1559518: RNCC: 5 | RNVC: 2

15 Oct 2003

5340-14-437-7243
Loop Clamp

144377243
666065: RNCC: 3 | RNVC: 9
666065: RNCC: 5 | RNVC: 9

14 Feb 1990

5340-14-228-0822
Access Cover

142280822
0067010890: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-547-5832
Access Cover

145475832
MPM010734: RNCC: 3 | RNVC: 2

17 Oct 2005

5340-14-299-2011
Retaining Strap

142992011
700180: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-466-2982
Mounting Plate

144662982
A65865: RNCC: 3 | RNVC: 2

3 Nov 1993

5340-14-031-9348
Bow Handle

140319348
A11B261100037U1: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-485-0231
Metal Grille

144850231
0885431Q00: RNCC: 3 | RNVC: 2
0885431Q00: RNCC: 5 | RNVC: 2

19 Dec 1996

5340-14-442-4045
Access Cover

144424045
20315233: RNCC: 3 | RNVC: 2
20315233: RNCC: 3 | RNVC: 9

16 Oct 1990

5340-14-524-8140
Mounting Plate

145248140
1006947E00: RNCC: 3 | RNVC: 2

18 Apr 2001

5340-14-485-0198
Angle Bracket

144850198
3BM01297AAAA: RNCC: 3 | RNVC: 2
3BM01297AAAA: RNCC: 5 | RNVC: 9

19 Dec 1996

5340-14-457-5118
Angle Bracket

144575118
646233: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-461-4680
Filler Opening Cap

144614680
ZT2060: RNCC: 3 | RNVC: 2

10 Mar 1993

5340-14-481-6332
Access Cover

144816332
1075154B00: RNCC: 3 | RNVC: 2

23 May 1996

5340-14-236-6713
Snap Hook

142366713
58023A: RNCC: 3 | RNVC: 2
58023: RNCC: 5 | RNVC: 2
058023: RNCC: 5 | RNVC: 9
AP36: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-571-1423
Utility Access Door

145711423
08528: RNCC: 3 | RNVC: 2
3303430085287: RNCC: 5 | RNVC: 2

22 Feb 2012

5340-14-430-0691
Loop Clamp

144300691
1814112: RNCC: 3 | RNVC: 2
10187: RNCC: 5 | RNVC: 2
11110187XX: RNCC: 5 | RNVC: 2
14112: RNCC: 5 | RNVC: 2

28 Feb 1989

5340-14-535-2476
Rod End Clevis

145352476
6501EHV110003: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-400-0725
Butt Hinge

144000725
212818: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-440-9920
Synchro Clamp

144409920
260502: RNCC: 3 | RNVC: 2
89288296: RNCC: 5 | RNVC: 2

9 Aug 1990

5340-14-524-1747
Webbing Strap

145241747
2241903: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-459-0704
Locking Stay

144590704
20P319PO1: RNCC: 3 | RNVC: 2
20P319P01: RNCC: 5 | RNVC: 2

18 Nov 1992

5340-14-553-8447
Angle Bracket

145538447
82093887000: RNCC: 3 | RNVC: 2

23 May 2007

5340-14-374-6128
Anchor Strap

143746128
5000114880: RNCC: 3 | RNVC: 2
5000114880: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-500-9188
Mounting Plate

145009188
E67100000014: RNCC: 3 | RNVC: 2
F300 0T 024 9397: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-529-9178
Bumper

145299178
RLSG00005A: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-402-0728
Mounting Plate

144020728
221940: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-357-9297
Retaining Strap

143579297
TH20A1305: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-14-388-7948
Access Cover

143887948
260100223: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-500-8230
Section Block Clamp

145008230
E64009998111: RNCC: 3 | RNVC: 2
F300 0T 024 8432: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-393-5501
Retaining Strap

143935501
970240: RNCC: 3 | RNVC: 2
970240: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-14-480-7264
Access Cover

144807264
4270369: RNCC: 3 | RNVC: 2
542486: RNCC: 5 | RNVC: 2
4270369: RNCC: 5 | RNVC: 9

28 Mar 1996

5340-14-303-3581
Retaining Strap

143033581
1849M6: RNCC: 3 | RNVC: 2
1849M6: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-511-6857
Snap Hook

145116857
D105935: RNCC: 3 | RNVC: 2

11 Jan 1999

5340-14-368-6523
Access Cover

143686523
944716: RNCC: 3 | RNVC: 2
944716: RNCC: 5 | RNVC: 9

20 Feb 1981

5340-14-301-1207
Access Cover

143011207
1800-22: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-359-5536
Access Cover

143595536
118306: RNCC: 3 | RNVC: 2

15 Oct 1979

5340-14-416-4783
Angle Bracket

144164783
533456: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-14-239-4374
Cover Strip

142394374
321A25-0002-33: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-377-2556
Angle Bracket

143772556
366A58-0110-91: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-505-1472
Pipe Hanger

145051472
E4M524-009M1: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-403-3655
Flush Catch Claw

144033655
212741: RNCC: 3 | RNVC: 2
R180301-35: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-489-9269
Cover Strip

144899269
307-163-605-0: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-14-336-3998
Sliding Door Track

143363998
330A22-2313-21: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-539-7296
Access Cover

145397296
AB 40-20/250R: RNCC: 3 | RNVC: 9
152113/7: RNCC: 5 | RNVC: 9

5 Feb 2004

5340-14-485-7305
Mounting Bracket

144857305
332A62-2425-00: RNCC: 3 | RNVC: 2

6 Feb 1997

5340-14-465-4969
Bridge Clamp

144654969
365A61-6006-20: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-300-5857
Retaining Band

143005857
NO PRIMARY REF14-300-5857: RNCC: 3 | RNVC: 2
15305: RNCC: 5 | RNVC: 9
85-681-5730: RNCC: 6 | RNVC: 9

1 Jan 1973

5340-14-231-0908
Loop Clamp

142310908
51213105016: RNCC: 3 | RNVC: 2
20G16: RNCC: 5 | RNVC: 2
A0021-20G16: RNCC: 5 | RNVC: 2
91313864: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-515-3806
Mounting Plate

145153806
U42233-24: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-519-1826
Access Cover

145191826
112E804-04: RNCC: 3 | RNVC: 2
1090711W04: RNCC: 5 | RNVC: 2
112E804-04: RNCC: 5 | RNVC: 9

10 Mar 2000

5340-14-297-3303
Loop Clamp

142973303
501-779-679-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-372-1008
Bumper

143721008
NO PRIMARY REF14-372-1008: RNCC: 3 | RNVC: 2
20198000: RNCC: 5 | RNVC: 9
99320139008: RNCC: 5 | RNVC: 9

1 Sep 1981

5340-14-361-7007
Mortise Lock Set

143617007
326-1: RNCC: 3 | RNVC: 2
M01520-64: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-14-342-3485
Butt Hinge

143423485
321A58-0809-96: RNCC: 3 | RNVC: 2
85-800-3544: RNCC: 6 | RNVC: 9

14 Apr 1977

5340-14-554-8078
Rim Lock

145548078
504131030000: RNCC: 3 | RNVC: 2

28 Aug 2007

5340-14-222-3006
Angle Bracket

142223006
DG7148: RNCC: 3 | RNVC: 9
DG7148A: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-528-5937
Mounting Plate

145285937
935596: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-366-7813
Retaining Strap

143667813
253200: RNCC: 3 | RNVC: 2
253200: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-546-7371
Mounting Bracket

145467371
S257A1111100: RNCC: 3 | RNVC: 2

9 Aug 2005

5340-14-424-6313
Mounting Plate

144246313
0319300750: RNCC: 3 | RNVC: 2

2 Jun 1988

5340-14-450-4998
Retaining Strap

144504998
BLC238913: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-14-240-8391
Mounting Bracket

142408391
70861610: RNCC: 3 | RNVC: 2
70861610: RNCC: 5 | RNVC: 9
T861610: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-546-3770
Mounting Bracket

145463770
5000139118: RNCC: 3 | RNVC: 2

28 Jun 2005

5340-14-416-4346
Access Cover

144164346
0805002N03: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-14-512-8096
Butt Hinge

145128096
192315: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-437-2809
Access Cover

144372809
16983830: RNCC: 3 | RNVC: 2

24 Jan 1990

5340-14-041-5569
Retaining Strap

140415569
952812: RNCC: 3 | RNVC: 2
952812: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-539-6776
Mounting Bracket

145396776
10648813: RNCC: 3 | RNVC: 2

28 Jan 2004

5340-14-376-6606
Anchor Strap

143766606
420060M: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-505-0216
Mounting Plate

145050216
5010114381: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-468-4556
Clamping Catch

144684556
29729242: RNCC: 3 | RNVC: 2
29729242: RNCC: 5 | RNVC: 9

3 Mar 1994

5340-14-485-2820
Mounting Plate

144852820
419479: RNCC: 3 | RNVC: 2
419479: RNCC: 5 | RNVC: 2

15 Jan 1997

5340-14-512-9031
Lock Bolt

145129031
552255: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-523-2813
Angle Bracket

145232813
RA1M701366140: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-480-3881
Mounting Bracket

144803881
90 08 94: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-424-6280
Access Cover

144246280
0319100160: RNCC: 3 | RNVC: 2

2 Jun 1988

5340-14-368-6392
Anchor Strap

143686392
BP5213: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-14-402-0179
Anchor Strap

144020179
224716: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-512-9106
Protection Bellows

145129106
562164: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-405-7300
Loop Clamp

144057300
02528804600: RNCC: 3 | RNVC: 2
59536106: RNCC: 5 | RNVC: 2

4 Dec 1985

5340-14-336-7152
Butt Hinge

143367152
192062: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-382-3382
Rod End Clevis

143823382
220145: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-513-0403
Retaining Strap

145130403
10419734: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-14-312-4625
Rim Lock Set

143124625
5803DR0ITE5293: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-346-9623
Rod End Clevis

143469623
C57066: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-14-399-9680
Angle Bracket

143999680
227244: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-208-7031
Leaf Spring

142087031
100908: RNCC: 3 | RNVC: 2
100908: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-335-8705
Mounting Bracket

143358705
190652: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-041-3456
Runner

140413456
16246288: RNCC: 3 | RNVC: 2
16246288: RNCC: 5 | RNVC: 2
16246288: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-433-5377
Runner

144335377
8164574: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-324-7260
Access Cover

143247260
16D2043DET21: RNCC: 3 | RNVC: 2
16D2043DET48: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-480-7618
Angle Bracket

144807618
1302111P132: RNCC: 3 | RNVC: 2

28 Mar 1996

5340-14-504-8550
Mounting Plate

145048550
4139303155: RNCC: 3 | RNVC: 2
5001825921: RNCC: 3 | RNVC: 2

5 Mar 1998

5340-14-214-7621
Rod End Clevis

142147621
0008021160: RNCC: 3 | RNVC: 2
8021160: RNCC: 5 | RNVC: 9
0008021160: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-448-9815
Anchor Strap

144489815
BAZ12178: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-14-500-3523
Mounting Bracket

145003523
D61402000002: RNCC: 3 | RNVC: 2
F300 0T 024 3614: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-450-2107
Anchor Strap

144502107
5000921434: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-384-6851
Access Cover

143846851
16761356: RNCC: 3 | RNVC: 2
16761356: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-304-3434
T Plate

143043434
330A21-2712-21: RNCC: 3 | RNVC: 2
330A21-2712-21: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-533-9666
Strap Fastener Loop

145339666
436503: RNCC: 3 | RNVC: 2
PLN495000/IND.E 13/08/01 REP111: RNCC: 5 | RNVC: 2
W.436503: RNCC: 5 | RNVC: 2

5 Mar 2003

5340-14-524-3431
Strap Fastener Loop

145243431
C99/42/2187: RNCC: 3 | RNVC: 9

14 Mar 2001

5340-14-420-6387
Rod End Clevis

144206387
4-012-0030: RNCC: 3 | RNVC: 2

16 Dec 1987

5340-14-325-6077
Webbing Strap

143256077
89103-05: RNCC: 3 | RNVC: 2
89103-5: RNCC: 5 | RNVC: 2
89103-05: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-519-5949
Mounting Plate

145195949
191-1-03-100: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-240-9057
Mounting Plate

142409057
ST104M4-1-13P21C: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-224-1768
Strap Fastener Loop

142241768
9492-1: RNCC: 3 | RNVC: 2
11357-064: RNCC: 3 | RNVC: 2
9492-1: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-306-0581
Bow Handle

143060581
A10-79-072-00-0: RNCC: 3 | RNVC: 2
A10-79-072-00-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-293-3514
Pipe Hanger

142933514
121E52-189-00-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-361-0022
Rod End Connector

143610022
B0003-040F18: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-233-3186
Loop Clamp

142333186
A10-52-432-02-0: RNCC: 3 | RNVC: 2
A10-52-432-02-0: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-288-9803
Rod End Connector

142889803
A10-76-370-02-0: RNCC: 3 | RNVC: 2
A10-76-370-02-0: RNCC: 3 | RNVC: 2
A10-76-370-02-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-365-1421
Mending Plate

143651421
969633: RNCC: 3 | RNVC: 2
969633: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-505-4816
Mounting Bracket

145054816
41012032: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-348-9002
Detent Plunger

143489002
052334: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-14-497-8759
Mounting Bracket

144978759
10183262: RNCC: 3 | RNVC: 2

22 Oct 1997

5340-14-385-0440
Loop Clamp

143850440
SP325DPPPAS: RNCC: 3 | RNVC: 2

2 Jun 1983

5340-14-210-6490
Angle Bracket

142106490
0000653133: RNCC: 3 | RNVC: 2
0000653133: RNCC: 5 | RNVC: 9
653133: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-538-8836
Rim Latch

145388836
NGM0022040200074: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-358-5322
Angle Bracket

143585322
5000496771: RNCC: 3 | RNVC: 2
5000496771: RNCC: 5 | RNVC: 9

7 Sep 1979

5340-14-466-1659
Mounting Bracket

144661659
161138: RNCC: 3 | RNVC: 2
89169750: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-544-3377
Retaining Strap

145443377
82071791000: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-14-494-6159
Mounting Plate

144946159
806 816 196: RNCC: 3 | RNVC: 2
F300 0T 017 5434: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-503-1868
Cover Strip

145031868
RA1M814810422: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-520-4536
Mounting Plate

145204536
431957: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-381-2274
Support Hook

143812274
6502152G: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-387-2459
Retaining Strap

143872459
398848: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-14-460-0140
Angle Bracket

144600140
39449885: RNCC: 3 | RNVC: 2
39449885: RNCC: 5 | RNVC: 9

7 Jan 1993

5340-14-520-4712
Mounting Bracket

145204712
10477168: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-503-0214
Runner

145030214
E7412935: RNCC: 3 | RNVC: 9

17 Dec 1997

5340-14-465-9191
Runner

144659191
RL001NM010001: RNCC: 3 | RNVC: 9

18 Oct 1993

5340-14-435-7853
Mounting Bracket

144357853
20322735: RNCC: 3 | RNVC: 2
20322735: RNCC: 5 | RNVC: 9

22 Nov 1989

5340-14-535-9671
Mounting Plate

145359671
10612025: RNCC: 3 | RNVC: 2

2 Jul 2003

5340-14-460-9180
Angle Bracket

144609180
TB4011815: RNCC: 3 | RNVC: 2

16 Feb 1993

5340-14-360-7099
Detent Plunger

143607099
BAZ1675: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-525-8323
Loop Clamp

145258323
F118001: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-435-9285
Mounting Plate

144359285
CL1049: RNCC: 3 | RNVC: 2
89111911: RNCC: 5 | RNVC: 2
CL1049: RNCC: 5 | RNVC: 9

29 Nov 1989

5340-14-470-6408
Mounting Bracket

144706408
M4DZ7101940901: RNCC: 3 | RNVC: 2

29 Jun 1994

5340-14-533-8961
Mounting Plate

145338961
08-703-975: RNCC: 3 | RNVC: 2
SZ08.703.975: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-357-9455
Retaining Strap

143579455
389226: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-14-508-8914
Clamping Catch

145088914
F130044: RNCC: 3 | RNVC: 2

6 Oct 1998

5340-14-546-2058
Angle Bracket

145462058
RA1A706216021: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-515-3064
Protection Bellows

145153064
0009625542: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-363-8628
Webbing Strap

143638628
5000501154: RNCC: 3 | RNVC: 2
5000501154: RNCC: 5 | RNVC: 9

7 Aug 1980

5340-14-380-1111
Angle Bracket

143801111
BBZ0145: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-460-0810
Synchro Clamp

144600810
PM1A725534604: RNCC: 3 | RNVC: 2
PM1A725534604: RNCC: 5 | RNVC: 2

7 Jan 1993

5340-14-031-3877
Angle Bracket

140313877
A11A262100043: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-380-3039
Loop Clamp

143803039
ATP6A: RNCC: 3 | RNVC: 2
DAS070: RNCC: 3 | RNVC: 2
78723DH06: RNCC: 5 | RNVC: 2
ATP6A: RNCC: 5 | RNVC: 2
ATP6A: RNCC: 5 | RNVC: 9

8 Nov 1982

5340-14-518-9788
Mounting Plate

145189788
701070: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-432-7366
Loop Clamp

144327366
51114405036: RNCC: 3 | RNVC: 2
25J36: RNCC: 5 | RNVC: 2
NSA5516A39NJ: RNCC: 5 | RNVC: 2
NSA5516A39NJ: RNCC: 5 | RNVC: 2

21 Jun 1989

5340-14-513-5610
Mounting Plate

145135610
DE11410: RNCC: 3 | RNVC: 2

24 Mar 1999

5340-14-484-4106
Mounting Bracket

144844106
39375909: RNCC: 3 | RNVC: 2

14 Nov 1996

5340-14-533-8341
Locking Stay

145338341
56095441: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-447-0308
Access Cover

144470308
33804: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-14-257-8527
Plug Button

142578527
811291: RNCC: 3 | RNVC: 2
811291: RNCC: 5 | RNVC: 2
811291: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-447-3937
Bumper

144473937
45214627: RNCC: 3 | RNVC: 2
45214627: RNCC: 5 | RNVC: 9

15 May 1991

5340-14-402-9081
Padlock

144029081
02052201: RNCC: 3 | RNVC: 2
CITY45: RNCC: 5 | RNVC: 2
91477845: RNCC: 5 | RNVC: 2

25 Jul 1985

5340-14-351-2257
Access Cover

143512257
486180G: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-371-3931
Access Cover

143713931
16909856: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-449-3764
Cover Strip

144493764
DA1N201794705: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-302-3790
Access Cover

143023790
175626: RNCC: 3 | RNVC: 2

1 Jan 1973

Load More Results