What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 46 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 46 of 446

5340-14-507-7771
Access Cover

145077771
29483262: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-484-6037
Mounting Plate

144846037
8001449X00: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-524-0299
Runner

145240299
393029: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-14-358-9083
Access Cover

143589083
157137: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-455-7343
Mounting Bracket

144557343
0031137895: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-413-6922
Anchor Strap

144136922
TRSB01P057599: RNCC: 3 | RNVC: 2

15 Jan 1987

5340-14-379-0105
Bow Handle

143790105
16798178: RNCC: 3 | RNVC: 2
16798178: RNCC: 3 | RNVC: 9

6 Sep 1982

5340-14-384-3173
Loop Clamp

143843173
28GE20: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-554-9109
Bow Handle

145549109
82117832000: RNCC: 3 | RNVC: 2

6 Sep 2007

5340-14-329-5582
Access Cover

143295582
0000140534: RNCC: 3 | RNVC: 2
140534: RNCC: 5 | RNVC: 9
0000140534: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-405-2552
Angle Bracket

144052552
1240311: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-553-1033
Butt Hinge

145531033
47243087: RNCC: 3 | RNVC: 2

1 Mar 2007

5340-14-513-2956
Access Cover

145132956
8819733000: RNCC: 3 | RNVC: 2

10 Mar 1999

5340-14-513-3838
Mounting Bracket

145133838
DE33144: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-14-435-0572
Mounting Plate

144350572
31730943: RNCC: 3 | RNVC: 9

17 Oct 1989

5340-14-535-1943
Loop Clamp

145351943
5005005110: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-521-4119
Mounting Bracket

145214119
10511772: RNCC: 3 | RNVC: 2

26 Jul 2000

5340-14-460-5060
Mounting Plate

144605060
SHS1A0136A: RNCC: 3 | RNVC: 2

27 Jan 1993

5340-14-546-4409
Mounting Plate

145464409
82105965000: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-14-502-6979
Mounting Bracket

145026979
1069388: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-518-3670
Mounting Bracket

145183670
10570614: RNCC: 3 | RNVC: 2

2 Feb 2000

5340-14-390-3933
Bumper

143903933
20716622: RNCC: 3 | RNVC: 9

26 Jan 1984

5340-14-387-5665
Mounting Plate

143875665
437992: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-14-517-0806
Mounting Plate

145170806
MP1830F00: RNCC: 3 | RNVC: 2

3 Nov 1999

5340-14-374-6493
Angle Bracket

143746493
0035612311: RNCC: 3 | RNVC: 2
0035612311: RNCC: 5 | RNVC: 9
35612311: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-457-8626
Mounting Bracket

144578626
5000730759: RNCC: 3 | RNVC: 2
89287714: RNCC: 5 | RNVC: 2

24 Sep 1992

5340-14-468-5179
Angle Bracket

144685179
0235237810: RNCC: 3 | RNVC: 2

3 Mar 1994

5340-14-405-2504
Bow Handle

144052504
1140600: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-433-4255
Detent Plunger

144334255
0803126T00: RNCC: 3 | RNVC: 2

25 Jul 1989

5340-14-490-9264
Mounting Plate

144909264
4182 506 310 102: RNCC: 3 | RNVC: 2
F300 0T 000 6572: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-276-4488
Bridge Clamp

142764488
C2: RNCC: 3 | RNVC: 2
C2: RNCC: 5 | RNVC: 9
350019C0DE2: RNCC: 5 | RNVC: 9
350019C2: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-518-4866
Access Cover

145184866
0417 8555: RNCC: 3 | RNVC: 9

9 Feb 2000

5340-14-416-4353
Plug Button

144164353
0805034E02: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-14-512-5643
Utility Access Door

145125643
S8576708: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-364-0408
Rod End Clevis

143640408
1051010005: RNCC: 3 | RNVC: 2
1051010005: RNCC: 5 | RNVC: 2

7 Aug 1980

5340-14-413-9604
Retaining Strap

144139604
ST400S60P100: RNCC: 3 | RNVC: 2
BJQS60P100: RNCC: 5 | RNVC: 2

22 Jan 1987

5340-14-507-6314
Mounting Bracket

145076314
5010118552: RNCC: 3 | RNVC: 2
314734A13724: RNCC: 5 | RNVC: 2

30 Jul 1998

5340-14-364-5931
Anchor Strap

143645931
5000500115: RNCC: 3 | RNVC: 2
5000500115: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-518-2574
Mounting Bracket

145182574
23C660: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-14-468-0805
Mounting Bracket

144680805
LYN008055811101: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-545-7133
Mounting Plate

145457133
59295066: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-14-257-7528
Retaining Strap

142577528
9137931: RNCC: 3 | RNVC: 2
9137931: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-478-1355
Access Cover

144781355
191EL01Y: RNCC: 3 | RNVC: 2

11 Oct 1995

5340-14-507-6922
Mounting Bracket

145076922
10346607: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-294-1619
Loop Clamp

142941619
55218-303B316ADL: RNCC: 3 | RNVC: 2
85-800-1481: RNCC: 6 | RNVC: 9

1 Jan 1973

5340-14-334-9787
Control Rod

143349787
4F04-04-11: RNCC: 3 | RNVC: 2
85-688-6508: RNCC: 6 | RNVC: 9

2 Jun 1976

5340-14-218-5913
Loop Clamp

142185913
694000-13: RNCC: 3 | RNVC: 2
694000-13: RNCC: 5 | RNVC: 2
694000-13: RNCC: 5 | RNVC: 9

27 Aug 1997

5340-14-510-0299
Buckle

145100299
NO PRIMARY REF14-510-0299: RNCC: 3 | RNVC: 2
32102: RNCC: 5 | RNVC: 9
5340AA2021384: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-479-6856
Webbing Strap

144796856
142E985-00: RNCC: 3 | RNVC: 2
142E985-00: RNCC: 5 | RNVC: 9

31 Jan 1996

5340-14-472-3526
Detent Plunger

144723526
1084571R00: RNCC: 3 | RNVC: 2
MAT460-01-25-A: RNCC: 5 | RNVC: 2

19 Oct 1994

5340-14-429-9143
Retaining Strap

144299143
8700-005: RNCC: 3 | RNVC: 2
002415370A: RNCC: 5 | RNVC: 2

15 Feb 1989

5340-14-333-0787
Control Rod

143330787
NO PRIMARY REF14-333-0787: RNCC: 3 | RNVC: 2
23031: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-315-7605
Detent Plunger

143157605
773-415-016FF14DET34: RNCC: 3 | RNVC: 2
773-415-011DET34: RNCC: 5 | RNVC: 9
773-415-016FF14DET34: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-465-2976
Mounting Bracket

144652976
365A81-0226-01: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-395-8938
Mounting Plate

143958938
AS512-15A: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-372-3630
Retaining Band

143723630
D1512-735: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-408-1427
Expansion Plug

144081427
U01-4210A8820: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-490-3762
Detent Plunger

144903762
NO PRIMARY REF14-490-3762: RNCC: 3 | RNVC: 2
NNP5315844553791: RNCC: 5 | RNVC: 9

24 Sep 1997

5340-14-529-5621
Mounting Bracket

145295621
330A68-4831-00: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-255-4538
Loop Clamp

142554538
321A75-7142-00: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-413-9499
Runner

144139499
10-216-019: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-557-5350
Utility Resilient Mount

145575350
Z1478-08CM2: RNCC: 3 | RNVC: 2
THX3080/01084: RNCC: 5 | RNVC: 2

18 Jun 2008

5340-14-484-2693
Mounting Bracket

144842693
3130S78-10-327: RNCC: 3 | RNVC: 2
31307810327: RNCC: 5 | RNVC: 2

31 Oct 1996

5340-14-366-5816
Angle Bracket

143665816
050A54-579893R: RNCC: 3 | RNVC: 2
0579893R00: RNCC: 5 | RNVC: 2

20 Nov 1980

5340-14-466-3328
Loop Clamp

144663328
503B613: RNCC: 3 | RNVC: 2
85-695-1575: RNCC: 6 | RNVC: 9

3 Nov 1993

5340-14-544-1513
Loop Clamp

145441513
32A46-03100: RNCC: 3 | RNVC: 2

5 Jan 2005

5340-14-416-3413
Shimmy Damper

144163413
3773-1205: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-544-1738
Cushioning Pad

145441738
251453682-00: RNCC: 3 | RNVC: 2

6 Jan 2005

5340-14-362-3781
Bumper

143623781
A224-03-32: RNCC: 3 | RNVC: 2
A224-03-32: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-450-4433
Metal Grille

144504433
3104659: RNCC: 3 | RNVC: 2
1104914K00: RNCC: 5 | RNVC: 2
3104659: RNCC: 5 | RNVC: 2

9 Oct 1991

5340-14-457-5727
Angle Bracket

144575727
45057876: RNCC: 3 | RNVC: 2
45057876: RNCC: 5 | RNVC: 9

10 Sep 1992

5340-14-325-2096
Mending Plate

143252096
522068: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-535-1683
Angle Bracket

145351683
5000603928: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-535-1651
Retaining Strap

145351651
5000602086: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-439-3950
Angle Bracket

144393950
DA2C642020803: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-525-0420
Metal Grille

145250420
3106227: RNCC: 3 | RNVC: 2
3106227: RNCC: 5 | RNVC: 2

16 May 2001

5340-14-448-8322
Plug Button

144488322
12164: RNCC: 3 | RNVC: 2

17 Jul 1991

5340-14-401-3240
Mounting Plate

144013240
02K5547030: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-512-5306
Webbing Strap

145125306
CONTR04422X00: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-553-0558
Mounting Bracket

145530558
RA1M211001185N1: RNCC: 3 | RNVC: 2

27 Feb 2007

5340-14-504-1090
Retaining Strap

145041090
10217297: RNCC: 3 | RNVC: 2

6 Feb 1998

5340-14-420-6981
Webbing Strap

144206981
SA18: RNCC: 3 | RNVC: 2

16 Dec 1987

5340-14-551-3544
Angle Bracket

145513544
RA1A701686821N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-454-2437
Kick Door Plate

144542437
16296360: RNCC: 3 | RNVC: 2
16296360: RNCC: 5 | RNVC: 9

26 Mar 1992

5340-14-455-7383
Webbing Strap

144557383
160902: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-433-8413
Bow Handle

144338413
RP969356: RNCC: 3 | RNVC: 2

16 Aug 1989

5340-14-474-8493
Mounting Plate

144748493
MM1012F00: RNCC: 3 | RNVC: 2

8 Mar 1995

5340-14-459-5871
Mounting Bracket

144595871
6240301: RNCC: 3 | RNVC: 2
5045249: RNCC: 5 | RNVC: 9

10 Dec 1992

5340-14-466-0241
Loop Clamp

144660241
8150002400: RNCC: 3 | RNVC: 2
815N24: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-231-1235
Loop Clamp

142311235
9562840000: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-413-6992
Angle Bracket

144136992
412701000006: RNCC: 3 | RNVC: 2

15 Jan 1987

5340-14-505-4094
Synchro Clamp

145054094
12042028: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-465-8610
Angle Bracket

144658610
5010054841: RNCC: 3 | RNVC: 2

14 Oct 1993

5340-14-224-9487
Buckle

142249487
300B: RNCC: 3 | RNVC: 2
RAPC0300B: RNCC: 3 | RNVC: 2
128545: RNCC: 5 | RNVC: 2
VDP6292: RNCC: 5 | RNVC: 2
RAPC0300: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-551-3989
Mounting Bracket

145513989
5010650121: RNCC: 3 | RNVC: 2

15 Sep 2006

5340-14-303-3414
Retaining Band

143033414
42168: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-550-4744
Section Block Clamp

145504744
RA1B236350221: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-508-6559
Loop Clamp

145086559
11317005020: RNCC: 3 | RNVC: 2

23 Sep 1998

5340-14-551-2575
Pipe Hanger

145512575
RA1B702506087: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-465-6790
Bridge Clamp

144656790
GF92508: RNCC: 3 | RNVC: 2
91679626: RNCC: 5 | RNVC: 2
GF92508: RNCC: 5 | RNVC: 9
GF92508: RNCC: 5 | RNVC: 9

6 Oct 1993

5340-14-388-2772
Runner

143882772
M4ZS500D5117A: RNCC: 3 | RNVC: 2

3 Nov 1983

5340-14-554-1993
Loop Clamp

145541993
357 162: RNCC: 3 | RNVC: 2
357 162: RNCC: 3 | RNVC: 2

13 Jun 2007

5340-14-338-6134
Leaf Spring

143386134
5000001590: RNCC: 3 | RNVC: 2
5000001590: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-536-4180
Mounting Bracket

145364180
T711A1001161: RNCC: 3 | RNVC: 2

5 Aug 2003

5340-14-224-8846
Bumper

142248846
GSM1674A26: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-486-3608
Bumper

144863608
350910Y: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-516-8568
Loop Clamp

145168568
101162941580: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-14-361-2093
Runner

143612093
BAZ97667: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-457-7403
Mounting Bracket

144577403
211933: RNCC: 3 | RNVC: 2

17 Sep 1992

5340-14-480-5194
Mounting Bracket

144805194
35 56 47: RNCC: 3 | RNVC: 2

14 Mar 1996

5340-14-555-7901
Mounting Plate

145557901
0292117100: RNCC: 3 | RNVC: 2

14 Dec 2007

5340-14-520-1778
Mounting Bracket

145201778
40503027: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-467-7948
Mounting Bracket

144677948
MB2117F00: RNCC: 3 | RNVC: 2

27 Jan 1994

5340-14-495-6982
Bow Handle

144956982
317018041004A: RNCC: 3 | RNVC: 9
F300 0T 019 6570: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-525-5882
Angle Bracket

145255882
10 146 295 1240: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-532-1365
Mounting Plate

145321365
5010559927: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-14-499-1562
Mounting Plate

144991562
101006X04025A: RNCC: 3 | RNVC: 9
F300 0T 019 6666: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-518-5604
Mounting Bracket

145185604
5000747116: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-551-3492
Angle Bracket

145513492
RA1A701346719: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-506-2991
Lock Bolt

145062991
P1: RNCC: 3 | RNVC: 2
77091809: RNCC: 5 | RNVC: 2
91720086: RNCC: 5 | RNVC: 2

22 Apr 1998

5340-14-334-5837
Loop Clamp

143345837
89041: RNCC: 3 | RNVC: 2

1 Jun 1976

5340-14-372-0442
Bow Handle

143720442
174: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-544-3970
Tie Down Adapter

145443970
22355-856: RNCC: 3 | RNVC: 2

26 Jan 2005

5340-14-518-6441
Mounting Bracket

145186441
465112: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-400-0731
Butt Hinge

144000731
213064: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-549-3064
Mounting Bracket

145493064
5010631395: RNCC: 3 | RNVC: 2

21 Mar 2006

5340-14-529-0247
Bow Handle

145290247
4P01202ZB: RNCC: 3 | RNVC: 2

5 Mar 2002

5340-14-530-3351
Synchro Clamp

145303351
L125187: RNCC: 3 | RNVC: 2
570119: RNCC: 3 | RNVC: 2

31 May 2002

5340-14-505-1858
Loop Clamp

145051858
8008049F00: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-488-2483
Leakproof Seal Plug

144882483
R43601REP12: RNCC: 3 | RNVC: 2

23 Apr 1997

5340-14-549-8937
Mounting Bracket

145498937
31106801: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-041-3659
Mending Plate

140413659
16038440: RNCC: 3 | RNVC: 2
16038440: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-432-7362
Loop Clamp

144327362
51114405022: RNCC: 3 | RNVC: 2
NSA5516A25NJ: RNCC: 5 | RNVC: 2
25J22: RNCC: 5 | RNVC: 2
NSA5516A25NJ: RNCC: 5 | RNVC: 2

21 Jun 1989

5340-14-281-2241
Angle Bracket

142812241
10100442: RNCC: 3 | RNVC: 2
10100442: RNCC: 5 | RNVC: 2
CHR10100442: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-463-8723
Retaining Strap

144638723
166023: RNCC: 3 | RNVC: 2
89170134: RNCC: 5 | RNVC: 2

30 Jun 1993

5340-14-526-9570
Mounting Bracket

145269570
10606043: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-504-7808
Mounting Bracket

145047808
2267897R00: RNCC: 3 | RNVC: 2
1078951X00: RNCC: 5 | RNVC: 2
31520N2267897R00: RNCC: 5 | RNVC: 9

4 Mar 1998

5340-14-513-3859
Mounting Plate

145133859
DE33409: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-14-520-7373
Arched Cushion

145207373
MAT169-0027F19DE66: RNCC: 3 | RNVC: 2

6 Jun 2000

5340-14-410-7568
Rod End Clevis

144107568
A02560-01-2000P002: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-328-7132
Anchor Strap

143287132
PAA15-05-026: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-482-2411
Access Cover

144822411
NO PRIMARY REF14-482-2411: RNCC: 3 | RNVC: 2
Y50713: RNCC: 5 | RNVC: 9

27 Jun 1996

5340-14-345-1941
Loop Clamp

143451941
FD1B521-40: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-341-1732
Retaining Strap

143411732
M3C702-370: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-547-8975
Eye Hook

145478975
SA2678: RNCC: 3 | RNVC: 2

23 Nov 2005

5340-14-217-3372
Loop Clamp

142173372
3160S73-45-340: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-392-1816
Access Cover

143921816
3511 181 01631: RNCC: 3 | RNVC: 2
3511-181-01631: RNCC: 5 | RNVC: 2

21 Mar 1984

5340-14-549-6223
Mounting Plate

145496223
JCB 10 135-752: RNCC: 3 | RNVC: 2

24 Apr 2006

5340-14-487-5577
Mounting Plate

144875577
78786-050A17F: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-497-8949
Mounting Bracket

144978949
26.436.0008.00: RNCC: 3 | RNVC: 2

22 Oct 1997

5340-14-502-4820
Mounting Bracket

145024820
611350002: RNCC: 3 | RNVC: 2
611350002: RNCC: 5 | RNVC: 9

17 Dec 1997

5340-14-327-8638
Quick Release Pin

143278638
7-090-14-1230: RNCC: 3 | RNVC: 2
51277-1-181: RNCC: 5 | RNVC: 9
85-679-8110: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-482-6141
Mounting Plate

144826141
39062868: RNCC: 3 | RNVC: 2

18 Jul 1996

5340-14-263-9610
Cover Strip

142639610
330A25-2202-07: RNCC: 3 | RNVC: 2
330A25-2202-0700: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-510-1146
Access Cover

145101146
F294-57RS3: RNCC: 3 | RNVC: 2
1560AA8007952: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-230-4403
Retaining Band

142304403
061700985: RNCC: 3 | RNVC: 9
062054069: RNCC: 5 | RNVC: 9
54069: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-533-4617
Mounting Bracket

145334617
55-250-039: RNCC: 3 | RNVC: 2
SZ55.250.039: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-531-5965
Mounting Plate

145315965
3654W007: RNCC: 3 | RNVC: 2
3654W007: RNCC: 3 | RNVC: 2

3 Sep 2002

5340-14-441-3653
Cover Strip

144413653
PM1A227000021: RNCC: 3 | RNVC: 2
PM1A227000021: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-14-444-7365
Retaining Strap

144447365
73254: RNCC: 3 | RNVC: 2

21 Jan 1991

5340-14-482-9226
Pipe Hanger

144829226
78732-020-053B: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-276-0485
Expansion Shield

142760485
808014-00: RNCC: 3 | RNVC: 2
GRILLEGRIS25: RNCC: 5 | RNVC: 2
PLI0CHEVILLE7X25: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-457-4831
Loop Clamp

144574831
MAT169-0029F3: RNCC: 3 | RNVC: 2

8 Sep 1992

5340-14-406-2028
Webbing Strap

144062028
7034-25: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-549-6141
Mounting Bracket

145496141
CC201-615211-00: RNCC: 3 | RNVC: 2

21 Apr 2006

5340-14-425-4752
Handwheel

144254752
F150D160-14: RNCC: 3 | RNVC: 9

6 Jul 1988

5340-14-444-4450
Butt Hinge

144444450
121S44-910-63-0: RNCC: 3 | RNVC: 2

9 Jan 1991

5340-14-446-3929
Webbing Strap

144463929
P4C005752-03: RNCC: 3 | RNVC: 9

19 Mar 1991

5340-14-555-0710
Angle Bracket

145550710
21416329-00: RNCC: 3 | RNVC: 2
214163295: RNCC: 5 | RNVC: 2

26 Sep 2007

5340-14-531-8414
Runner

145318414
330A61-4014-20: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-215-9051
Mounting Plate

142159051
253-5M21P51: RNCC: 3 | RNVC: 9
PA253-5M21P51: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-490-3025
Mounting Bracket

144903025
A02332-03-1100P005: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-334-8476
Retaining Strap

143348476
BN418-501F11C1: RNCC: 3 | RNVC: 2
2200033: RNCC: 3 | RNVC: 2

2 Jun 1976

5340-14-555-1397
Blank Panel

145551397
FB384 010 07 P DXL-077: RNCC: 3 | RNVC: 2

4 Oct 2007

5340-14-509-8011
Runner

145098011
1600-105-313-02: RNCC: 3 | RNVC: 2
5340AA0011979: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-273-5945
Loop Clamp

142735945
NO PRIMARY REF14-273-5945: RNCC: 3 | RNVC: 2
9562841030: RNCC: 5 | RNVC: 2
13333M10: RNCC: 5 | RNVC: 9
13333M10: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-552-8567
Mounting Bracket

145528567
HERFERU4: RNCC: 3 | RNVC: 2

8 Feb 2007

5340-14-361-8619
Angle Bracket

143618619
021079003502: RNCC: 3 | RNVC: 2
021079003502: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-14-536-9741
Utility Access Door

145369741
231045-017: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-400-0511
Corner Brace

144000511
372761: RNCC: 3 | RNVC: 2
372761: RNCC: 5 | RNVC: 9

24 Apr 1985

5340-14-357-2252
Retaining Strap

143572252
19306879: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-407-9923
Plug Button

144079923
M4Z7301424101: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-551-4586
Mounting Bracket

145514586
713495: RNCC: 3 | RNVC: 2

25 Sep 2006

5340-14-470-1912
Access Cover

144701912
405212: RNCC: 3 | RNVC: 2

8 Jun 1994

5340-14-367-8460
Access Cover

143678460
1632D07REP1: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-352-5645
Pipe Hanger

143525645
A11A522320050: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-450-2143
Mounting Bracket

144502143
5172200500: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-455-3658
Protection Bellows

144553658
0000714997: RNCC: 3 | RNVC: 2

21 May 1992

5340-14-475-3084
Access Cover

144753084
46422653: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-14-444-2411
Cover Strip

144442411
PM1A216450311: RNCC: 3 | RNVC: 2
PM1A216450311: RNCC: 5 | RNVC: 2

18 Dec 1990

5340-14-250-3685
Access Cover

142503685
150617: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-479-3511
Mounting Plate

144793511
FH01PD210004: RNCC: 3 | RNVC: 9

10 Jan 1996

5340-14-413-1387
Access Cover

144131387
T0P7I1407: RNCC: 3 | RNVC: 2
064655: RNCC: 5 | RNVC: 2

26 Nov 1986

5340-14-357-9431
Retaining Strap

143579431
386392: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-14-509-7540
Access Cover

145097540
29475363: RNCC: 3 | RNVC: 2

4 Nov 1998

5340-14-396-4436
Access Cover

143964436
065R50-689430T: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-553-4872
Retaining Strap

145534872
0319772690: RNCC: 3 | RNVC: 2

5 Apr 2007

5340-14-382-8879
Angle Bracket

143828879
P745050451: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-519-0005
Angle Bracket

145190005
707285: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-534-5571
Access Cover

145345571
DA2C708114511N1: RNCC: 3 | RNVC: 2

26 Mar 2003

5340-14-434-2964
Anchor Strap

144342964
536405: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-417-5462
Plug Button

144175462
4679A428REP22: RNCC: 3 | RNVC: 2
589802: RNCC: 5 | RNVC: 2

8 Jul 1987

5340-14-397-8756
Anchor Strap

143978756
PLU20A16: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-550-0844
Mounting Bracket

145500844
61152414AA: RNCC: 3 | RNVC: 2

1 Jun 2006

5340-14-531-5694
Mounting Plate

145315694
008J723: RNCC: 3 | RNVC: 2

28 Aug 2002

5340-14-418-1211
Rod End Clevis

144181211
059129R01TRA: RNCC: 3 | RNVC: 2
059129R: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-545-0992
Loop Clamp

145450992
5010571699: RNCC: 3 | RNVC: 2

17 Mar 2005

5340-14-397-4994
Access Cover

143974994
069A34-685913R: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-383-4235
Access Cover

143834235
045S03-622808K: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-500-7373
Mounting Bracket

145007373
996389: RNCC: 3 | RNVC: 2
996389: RNCC: 5 | RNVC: 2
F300 0T 024 7570: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-536-4521
Mounting Bracket

145364521
15151069: RNCC: 3 | RNVC: 2

25 Aug 2003

5340-14-351-0477
Mending Plate

143510477
4324: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-554-1425
Angle Bracket

145541425
355 440: RNCC: 3 | RNVC: 2
355 440: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-547-5178
Mounting Bracket

145475178
RA1B701450211N1: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-485-1050
Elastic Strap

144851050
009212050P: RNCC: 3 | RNVC: 2

8 Jan 1997

5340-14-545-4656
Retaining Strap

145454656
RA1B701126051: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-533-2893
Cover Strip

145332893
12-250-346: RNCC: 3 | RNVC: 2
SZ12.250.346: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-489-4865
Rigid Caster

144894865
80292: RNCC: 3 | RNVC: 9
91437212: RNCC: 5 | RNVC: 2
91437212: RNCC: 5 | RNVC: 2

23 Jul 1997

5340-14-544-0533
Mounting Bracket

145440533
5010604054: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-14-550-3292
Mounting Bracket

145503292
2715850530: RNCC: 3 | RNVC: 2

15 Jun 2006

5340-14-399-1189
Leaf Spring

143991189
5000714680: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-541-9062
Expansion Shield

145419062
RAWLNUT5380A: RNCC: 3 | RNVC: 2
8702: RNCC: 5 | RNVC: 2
SC030339: RNCC: 6 | RNVC: 9

2 Jul 2004

5340-14-551-1504
Utility Access Door

145511504
1SH41837602: RNCC: 3 | RNVC: 2

29 Aug 2006

5340-14-476-7030
Access Cover

144767030
22219: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-14-535-1635
Rod End Clevis

145351635
5000497827: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-483-7016
Webbing Strap

144837016
H125538D: RNCC: 3 | RNVC: 2
F300 0T 016 9023: RNCC: 6 | RNVC: 9

27 Sep 1996

5340-14-401-8083
Buckle

144018083
BO5IN: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-313-8590
Rod End Clevis

143138590
8859: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-368-2601
Mounting Plate

143682601
AMG203809: RNCC: 3 | RNVC: 2
203809: RNCC: 5 | RNVC: 2

20 Feb 1981

5340-14-522-3213
Mounting Bracket

145223213
10473614: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-14-360-7062
Rigid Caster

143607062
62011P1-85: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-313-7096
Access Cover

143137096
0210070100: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-347-8737
Rod End Clevis

143478737
1070180005: RNCC: 3 | RNVC: 2
1070180005: RNCC: 5 | RNVC: 2

1 Mar 1978

5340-14-244-7959
Anchor Strap

142447959
V4N01306: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-285-9820
Leaf Spring

142859820
US51799: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-416-4651
Bumper

144164651
532533: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-14-452-7216
Protection Bellows

144527216
M4ZS460D1848: RNCC: 3 | RNVC: 2

15 Jan 1992

5340-14-359-5770
Rod End Clevis

143595770
1000009: RNCC: 3 | RNVC: 2

15 Oct 1979

5340-14-274-1145
Loop Clamp

142741145
160-78842: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-553-1013
Mounting Bracket

145531013
47243082AA: RNCC: 3 | RNVC: 2

1 Mar 2007

5340-14-504-6971
Bow Handle

145046971
5010054231: RNCC: 3 | RNVC: 2
7519400: RNCC: 3 | RNVC: 2

27 Feb 1998

5340-14-409-0275
Anchor Strap

144090275
3043289: RNCC: 3 | RNVC: 2
3043289: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-276-2732
Tubular Fairlead

142762732
160-18217: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-394-9197
Retaining Strap

143949197
20728183: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-555-6195
Loop Clamp

145556195
78651RH17CF: RNCC: 1 | RNVC: 2
78651RH17CF: RNCC: 3 | RNVC: 2

3 Dec 2007

5340-14-441-5912
Angle Bracket

144415912
E05424024: RNCC: 3 | RNVC: 2

4 Sep 1990

5340-14-528-7647
Mounting Plate

145287647
T257A5005151: RNCC: 3 | RNVC: 2

14 Feb 2002

5340-14-413-9734
Anchor Strap

144139734
ST406M63P161E15: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-430-3104
Mounting Bracket

144303104
MOYA010600: RNCC: 3 | RNVC: 2
M0YA010600: RNCC: 5 | RNVC: 2

15 Mar 1989

5340-14-527-1863
Mounting Bracket

145271863
10504974: RNCC: 3 | RNVC: 2

10 Oct 2001

5340-14-551-8653
Mounting Bracket

145518653
43025002: RNCC: 3 | RNVC: 2
43025002: RNCC: 3 | RNVC: 9

3 Nov 2006

5340-14-539-9588
Angle Bracket

145399588
RA1A703749325: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-351-0204
Mending Plate

143510204
209445: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-552-1197
Pipe Hanger

145521197
0249852610: RNCC: 3 | RNVC: 2

27 Nov 2006

5340-14-520-7620
Angle Bracket

145207620
47176461: RNCC: 3 | RNVC: 2

14 Jun 2000

5340-14-329-6279
Retaining Strap

143296279
1060630037: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-412-5023
Clamping Catch

144125023
7016ACIERCADMIEBICHR0MATE: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-14-466-2995
Mounting Bracket

144662995
A68574: RNCC: 3 | RNVC: 2

3 Nov 1993

5340-14-497-6729
Mounting Plate

144976729
6K3753: RNCC: 3 | RNVC: 2
F300 0T 023 4776: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-500-3833
Mounting Plate

145003833
E62102300018: RNCC: 3 | RNVC: 2
F300 0T 024 3934: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-554-5531
Mounting Plate

145545531
0298188000: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-14-351-1097
Lock-Release Lever

143511097
6817417-015: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-439-8673
Flush Door Ring

144398673
217/00013/00: RNCC: 3 | RNVC: 2
RAR3472: RNCC: 5 | RNVC: 2
902.89.07.15: RNCC: 5 | RNVC: 2

29 May 1990

5340-14-348-8632
Bumper

143488632
3001CBM102-2003: RNCC: 3 | RNVC: 2
3001CBM102-20-03: RNCC: 5 | RNVC: 2
3001CBM1022003: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-296-8157
Buckle

142968157
11626-033: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-439-2431
Pipe Hanger

144392431
332A52-1210-01: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-365-5239
Luggage Lock

143655239
NT8465-1009STCMPAR242: RNCC: 2 | RNVC: 2

19 Sep 1980

5340-14-513-6518
Mounting Plate

145136518
21228366-00: RNCC: 3 | RNVC: 2
21228366-9: RNCC: 5 | RNVC: 2

1 Apr 1999

5340-14-416-8644
Mounting Plate

144168644
F271-11834: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-312-6417
Loop Clamp

143126417
3160S78-04-977: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-427-1347
Angle Bracket

144271347
M330-10015: RNCC: 3 | RNVC: 2

6 Oct 1988

5340-14-469-6957
Rod End Clevis

144696957
80-301018: RNCC: 3 | RNVC: 2

4 May 1994

5340-14-418-2781
Detent Plunger

144182781
J05107-01-1510P005: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-356-3097
Butt Hinge

143563097
MS1382-10-08: RNCC: 3 | RNVC: 2

25 Apr 1979

5340-14-487-5570
Mounting Plate

144875570
78785-050B15F: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-224-4751
Bumper

142244751
3130S76-32-103: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-487-0680
Mounting Bracket

144870680
332A91-5416-00: RNCC: 3 | RNVC: 2

2 Apr 1997

5340-14-363-9232
Runner

143639232
539789012: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-548-1229
Mounting Bracket

145481229
5010274156: RNCC: 3 | RNVC: 2

12 Dec 2005

5340-14-212-5713
Mending Plate

142125713
0000454321: RNCC: 3 | RNVC: 2
454321: RNCC: 5 | RNVC: 9
0000454321: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-455-9094
Angle Bracket

144559094
PM1A726500031: RNCC: 3 | RNVC: 2
PM1A726500031: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-539-8642
Safety Cable Kit

145398642
695 720 467 017: RNCC: 3 | RNVC: 2
902.IMP.001: RNCC: 3 | RNVC: 2

16 Feb 2004

5340-14-535-3812
Mounting Plate

145353812
5010220233: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-576-0060
Utility Access Door

145760060
82660974000: RNCC: 3 | RNVC: 2

23 May 2013

5340-14-548-6274
Angle Bracket

145486274
RA1M702606070N1: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-263-6711
Loop Clamp

142636711
0176-526067: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-447-2463
Detent Plunger

144472463
0PHU02-620499W: RNCC: 3 | RNVC: 2
0620499W00: RNCC: 5 | RNVC: 2

15 May 1991

5340-14-533-1374
Mounting Bracket

145331374
10438843: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-14-500-8241
Mounting Plate

145008241
E64009998108: RNCC: 3 | RNVC: 2
F300 0T 024 8443: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-324-9827
Retaining Strap

143249827
70075: RNCC: 3 | RNVC: 2
70075: RNCC: 3 | RNVC: 9
0035646015: RNCC: 5 | RNVC: 2
0003538691: RNCC: 5 | RNVC: 2
0003538691: RNCC: 5 | RNVC: 9
3538691: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-403-0565
Angle Bracket

144030565
38500750: RNCC: 3 | RNVC: 2

25 Jul 1985

5340-14-411-4363
Wiring Harness

144114363
A11A822210220A1: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-502-7235
Anchor Strap

145027235
1171287: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-440-2885
Retaining Strap

144402885
39530764: RNCC: 3 | RNVC: 2
39530764: RNCC: 5 | RNVC: 9

11 Jul 1990

5340-14-506-2966
Access Cover

145062966
38660229: RNCC: 3 | RNVC: 2
38660229: RNCC: 5 | RNVC: 9

22 Apr 1998

5340-14-466-2736
Access Cover

144662736
45430633: RNCC: 3 | RNVC: 2
45430633: RNCC: 3 | RNVC: 9

3 Nov 1993

5340-14-458-9229
Angle Bracket

144589229
100A107224: RNCC: 3 | RNVC: 2
A107224: RNCC: 5 | RNVC: 2
100A107224: RNCC: 5 | RNVC: 9

5 Nov 1992

5340-14-489-5404
Mounting Bracket

144895404
45571817: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-14-457-5202
Access Cover

144575202
644088: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-372-6953
Anchor Strap

143726953
3254-33: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-318-1289
Loop Clamp

143181289
79026987: RNCC: 3 | RNVC: 2
79026987: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-375-8325
Butt Hinge

143758325
16787668: RNCC: 3 | RNVC: 2
16787668: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-258-1276
Rod End Clevis

142581276
L102784: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-413-1700
Access Cover

144131700
412706024112: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-555-2031
Access Cover

145552031
56999316AB: RNCC: 3 | RNVC: 2

10 Oct 2007

5340-14-406-3450
Access Cover

144063450
79095330: RNCC: 3 | RNVC: 2
79095330: RNCC: 5 | RNVC: 9

8 Jan 1986

5340-14-549-3869
Safety Cable Kit

145493869
35260SP: RNCC: 3 | RNVC: 2

28 Mar 2006

5340-14-447-1858
Rod End Clevis

144471858
NGS1A2504: RNCC: 3 | RNVC: 2

3 May 1991

5340-14-394-8804
Mounting Plate

143948804
16299364: RNCC: 1 | RNVC: 2
44LN00-554753N: RNCC: 3 | RNVC: 2
0554753N00: RNCC: 5 | RNVC: 2
16299364: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-500-8175
Section Block Clamp

145008175
E64009998053: RNCC: 3 | RNVC: 2
F300 0T 024 8377: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-528-4304
Access Cover

145284304
058295Z22351: RNCC: 3 | RNVC: 2

29 Jan 2002

5340-14-525-5983
Access Cover

145255983
10 146 400 1350: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-440-6515
Access Cover

144406515
31755085: RNCC: 3 | RNVC: 9

18 Jul 1990

5340-14-401-6552
Rod End Clevis

144016552
0BEB02-656439L: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-513-8029
Access Cover

145138029
DE11452: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-494-9424
Access Cover

144949424
5448614: RNCC: 3 | RNVC: 2
F300 0T 018 0984: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-385-8818
Anchor Strap

143858818
54742: RNCC: 3 | RNVC: 9

24 Aug 1983

5340-14-384-9039
Rod End Clevis

143849039
49134: RNCC: 3 | RNVC: 2

2 Jun 1983

5340-14-302-3899
Access Cover

143023899
173701: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-303-3929
Access Cover

143033929
24C2080: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-529-8852
Utility Access Door

145298852
OB1515: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-407-5256
Anchor Strap

144075256
2220301: RNCC: 3 | RNVC: 2

27 Feb 1986

5340-14-458-8750
Mounting Plate

144588750
39073963: RNCC: 3 | RNVC: 2

5 Nov 1992

5340-14-307-0563
Access Cover

143070563
561148: RNCC: 3 | RNVC: 2
5156114800: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-517-3483
Access Cover

145173483
29051257: RNCC: 3 | RNVC: 2

6 Dec 1999

5340-14-374-0358
Rod End Clevis

143740358
BAZ96686: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-522-5789
Access Cover

145225789
161304: RNCC: 3 | RNVC: 2

8 Nov 2000

5340-14-385-2680
Access Cover

143852680
371791: RNCC: 3 | RNVC: 2
371791: RNCC: 5 | RNVC: 9

26 Jul 1983

5340-14-505-8319
Protection Bellows

145058319
45607216: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-375-1417
Pipe Hanger

143751417
A11A522340027: RNCC: 3 | RNVC: 2

30 Jan 1982

5340-14-536-6813
Access Cover

145366813
47086318: RNCC: 3 | RNVC: 2

10 Sep 2003

5340-14-548-9539
Retaining Band

145489539
82123679000: RNCC: 3 | RNVC: 2

24 Feb 2006

5340-14-031-1560
Turnbuckle Body

140311560
VDP2911: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-397-7069
Access Cover

143977069
401MA0566F7: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-396-2289
Angle Bracket

143962289
223059: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-547-8328
Mounting Bracket

145478328
V001055: RNCC: 3 | RNVC: 2

17 Nov 2005

5340-14-549-2049
Bumper

145492049
61042711AA: RNCC: 3 | RNVC: 2

8 Mar 2006

5340-14-531-7257
Shelf Bracket

145317257
TB3050104: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-14-548-1046
Angle Bracket

145481046
RA1A702206051: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-504-9353
Door Hook

145049353
CROCH91124X00: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-528-1846
Access Cover

145281846
56151813AA: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-14-537-5901
Access Cover

145375901
39406097: RNCC: 3 | RNVC: 2

12 Nov 2003

5340-14-372-2255
Furniture Leg Tip

143722255
D1308: RNCC: 3 | RNVC: 2
D976K: RNCC: 5 | RNVC: 2

1 Sep 1981

5340-14-442-3996
Access Cover

144423996
20128762: RNCC: 3 | RNVC: 2
20128762: RNCC: 3 | RNVC: 9

15 Oct 1990

5340-14-478-7681
Mounting Plate

144787681
10027655: RNCC: 3 | RNVC: 2

20 Nov 1995

5340-14-273-6035
Rod End Clevis

142736035
10194: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-539-4369
Access Cover

145394369
5614666A: RNCC: 3 | RNVC: 2

14 Jan 2004

5340-14-540-2397
Access Cover

145402397
010586035P: RNCC: 3 | RNVC: 2

13 Mar 2004

5340-14-504-3372
Butt Hinge

145043372
3900676M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-335-3557
Access Cover

143353557
197386: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-455-3505
Expansion Plug

144553505
0915-11: RNCC: 3 | RNVC: 2
7903075094: RNCC: 5 | RNVC: 2

21 May 1992

5340-14-466-1833
Cover Strip

144661833
167164: RNCC: 3 | RNVC: 2
89170261: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-446-4897
Mounting Bracket

144464897
293508F: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-14-384-7823
Angle Bracket

143847823
20070224: RNCC: 3 | RNVC: 2
20070224: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-552-4643
Access Cover

145524643
49234: RNCC: 3 | RNVC: 2

5 Jan 2007

5340-14-447-3781
Access Cover

144473781
16045279: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-385-2446
Access Cover

143852446
30303472BAA: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-467-1121
Mounting Plate

144671121
16662303: RNCC: 3 | RNVC: 2
16662303: RNCC: 5 | RNVC: 9

16 Dec 1993

5340-14-465-6442
Access Cover

144656442
79136304: RNCC: 3 | RNVC: 2

6 Oct 1993

5340-14-528-8112
Access Cover

145288112
RA1M622322820: RNCC: 3 | RNVC: 2

18 Feb 2002

5340-14-540-7388
Access Cover

145407388
38052172: RNCC: 3 | RNVC: 2
322820: RNCC: 5 | RNVC: 2
4848ZG8613181601: RNCC: 6 | RNVC: 9

23 Apr 2004

5340-14-508-5204
Mounting Bracket

145085204
10540222: RNCC: 3 | RNVC: 2

16 Sep 1998

5340-14-434-7204
Anchor Strap

144347204
01269: RNCC: 3 | RNVC: 9

2 Oct 1989

5340-14-233-8818
Access Cover

142338818
61454: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-284-5633
Access Cover

142845633
0249207040: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-551-2539
Angle Bracket

145512539
RA1B702502161N1: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-555-8401
Access Cover

145558401
61058849AA: RNCC: 3 | RNVC: 2

18 Dec 2007

5340-14-347-9832
Access Cover

143479832
622203: RNCC: 3 | RNVC: 2
622203: RNCC: 5 | RNVC: 9

29 Mar 1978

5340-14-535-5045
Cover Strip

145355045
10-250-817: RNCC: 3 | RNVC: 2
SZ10.250.817: RNCC: 3 | RNVC: 2

31 May 2003

5340-14-550-5564
Loop Clamp

145505564
5010571758: RNCC: 3 | RNVC: 2

26 Jun 2006

5340-14-424-0568
Anchor Strap

144240568
254502: RNCC: 3 | RNVC: 2

10 May 1988

5340-14-507-7720
Access Cover

145077720
46831270: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-532-0543
Access Cover

145320543
0RX35600: RNCC: 3 | RNVC: 2
0RX35600: RNCC: 5 | RNVC: 9

9 Oct 2002

5340-14-500-8215
Section Block Clamp

145008215
E64009998104: RNCC: 3 | RNVC: 2
F300 0T 024 8417: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-351-9755
Access Cover

143519755
BY148A10203: RNCC: 3 | RNVC: 2
BFC10203: RNCC: 5 | RNVC: 2

16 Oct 1978

5340-14-481-6902
Tubular Fairlead

144816902
413452: RNCC: 3 | RNVC: 2
413452-001: RNCC: 5 | RNVC: 9

23 May 1996

5340-14-456-5977
Mending Plate

144565977
JVBT102005-02: RNCC: 3 | RNVC: 2
5045576: RNCC: 5 | RNVC: 9

9 Jul 1992

5340-14-427-8642
Rod End Clevis

144278642
1822-122-025: RNCC: 3 | RNVC: 2

17 Nov 1988

5340-14-328-6885
Access Cover

143286885
M208-28014: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-387-1789
Webbing Strap

143871789
2775-018: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-410-2912
Bumper

144102912
332A21-1409-20: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-14-473-8442
Mounting Bracket

144738442
332A72-2227-20: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-357-7994
Loop Clamp

143577994
79-030-83-147: RNCC: 3 | RNVC: 2
26140049T: RNCC: 3 | RNVC: 2
7903083155: RNCC: 5 | RNVC: 2
26140049: RNCC: 5 | RNVC: 2
ZC9614004U: RNCC: 5 | RNVC: 2

20 Jul 1979

5340-14-470-5465
Loop Clamp

144705465
EA5M707-083: RNCC: 3 | RNVC: 2

22 Jun 1994

5340-14-526-0733
Arched Cushion

145260733
E1M-3704-20: RNCC: 3 | RNVC: 2
MAT164-0024F3BLEUE: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-14-357-7971
Retaining Clip

143577971
AZ841-53: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-14-332-3054
Handwheel

143323054
NO PRIMARY REF14-332-3054: RNCC: 3 | RNVC: 2
28268: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-364-5687
Control Rod

143645687
HY142-87: RNCC: 3 | RNVC: 2
0301420870: RNCC: 5 | RNVC: 2
0301420870: RNCC: 5 | RNVC: 9
301420870: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-393-6062
Rod End Clevis

143936062
NO PRIMARY REF14-393-6062: RNCC: 3 | RNVC: 2
0329-411-202-08: RNCC: 5 | RNVC: 9

7 Jun 1984

5340-14-499-1550
Mounting Bracket

144991550
101006003032A: RNCC: 3 | RNVC: 2
59154277-502: RNCC: 3 | RNVC: 2
101006003032A: RNCC: 3 | RNVC: 9
F300 0T 019 6633: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-333-0729
Bumper

143330729
NO PRIMARY REF14-333-0729: RNCC: 3 | RNVC: 2
18711: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-477-1428
Mounting Plate

144771428
3511-312-63391: RNCC: 3 | RNVC: 2
3511-312-63391: RNCC: 5 | RNVC: 9

26 Jul 1995

5340-14-281-7217
Corner Brace

142817217
NO PRIMARY REF14-281-7217: RNCC: 3 | RNVC: 2
C1: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-522-5203
Rod End Clevis

145225203
62-14-20: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-14-369-9889
Mending Plate

143699889
M363-04777: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-511-2580
Runner

145112580
241921: RNCC: 3 | RNVC: 2
241921-001: RNCC: 5 | RNVC: 9

9 Dec 1998

5340-14-433-6348
Mounting Bracket

144336348
M363-04180: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-271-0255
Loop Clamp

142710255
3160S86-30-011: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-480-4873
Butt Hinge

144804873
GFCAA10: RNCC: 3 | RNVC: 2
F0025650: RNCC: 5 | RNVC: 9

14 Mar 1996

5340-14-435-0065
Access Cover

144350065
332A32-2119-02: RNCC: 3 | RNVC: 2

11 Oct 1989

5340-14-424-8065
Access Cover

144248065
NO PRIMARY REF14-424-8065: RNCC: 3 | RNVC: 2
86855: RNCC: 5 | RNVC: 9
86855: RNCC: 5 | RNVC: 9

9 Jun 1988

5340-14-265-7032
Snap Hook

142657032
AB42-1: RNCC: 3 | RNVC: 2
22125-001: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-493-9938
Snap Hook

144939938
NO PRIMARY REF14-493-9938: RNCC: 3 | RNVC: 2
M0USQUET0N A BELIERE R0NDE 50MM: RNCC: 5 | RNVC: 9
F300 0T 014 9485: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-418-0996
Angle Bracket

144180996
23109713-3: RNCC: 3 | RNVC: 2
23109713: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-340-3144
Angle Bracket

143403144
M3C704-099: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-408-5095
Bumper

144085095
M496-220105: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-555-8442
Detent Plunger

145558442
260733690-00: RNCC: 3 | RNVC: 2

18 Dec 2007

5340-14-398-6457
Mending Plate

143986457
NO PRIMARY REF14-398-6457: RNCC: 3 | RNVC: 2
UCMCWP10: RNCC: 5 | RNVC: 9

31 Jan 1985

5340-14-502-3381
Access Cover

145023381
307-244-301-0: RNCC: 3 | RNVC: 2

9 Dec 1997

5340-14-357-8875
Webbing Strap

143578875
3511-131-25541: RNCC: 3 | RNVC: 2
3511 131 25541: RNCC: 5 | RNVC: 2

20 Jul 1979

5340-14-357-8995
Locking Stay

143578995
0014050241: RNCC: 3 | RNVC: 2
0014050241: RNCC: 5 | RNVC: 9

20 Jul 1979

5340-14-250-4592
Loop Clamp

142504592
ST406M52P620: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-505-1358
Metal Grille

145051358
283097: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-412-4167
Retaining Strap

144124167
67006-89: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-14-526-4072
Retaining Band

145264072
47176736: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-507-9894
Mounting Plate

145079894
4773123110: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-545-9918
Access Cover

145459918
19224534: RNCC: 3 | RNVC: 2

2 Jun 2005

5340-14-535-7583
Mounting Bracket

145357583
T947A3001203: RNCC: 3 | RNVC: 2

25 Jun 2003

5340-14-462-7372
Synchro Clamp

144627372
PM1A728110002: RNCC: 3 | RNVC: 2
PM1A728110002: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-365-4483
Runner

143654483
4070-511B220: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-500-7049
Section Block Clamp

145007049
E64009998021: RNCC: 3 | RNVC: 2
F300 0T 024 7241: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-530-6822
Mounting Plate

145306822
T257A5005127: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-535-1941
Loop Clamp

145351941
5005005020: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-514-4191
Snap Hook

145144191
AB37: RNCC: 3 | RNVC: 2

20 May 1999

5340-14-439-5832
Clamping Catch

144395832
TL100AXE9L: RNCC: 3 | RNVC: 2

16 May 1990

5340-14-448-4703
Anchor Strap

144484703
5010046897: RNCC: 3 | RNVC: 2
5010044257: RNCC: 5 | RNVC: 2

26 Jun 1991

5340-14-443-0789
Loop Clamp

144430789
23000711: RNCC: 3 | RNVC: 2
382UTB071: RNCC: 5 | RNVC: 2

7 Nov 1990

5340-14-501-6970
Mounting Bracket

145016970
45280487: RNCC: 3 | RNVC: 2
45280487: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-545-6085
Mounting Bracket

145456085
82102648000: RNCC: 3 | RNVC: 2

25 Apr 2005

5340-14-490-6368
Mounting Plate

144906368
39067241: RNCC: 3 | RNVC: 2
39067241: RNCC: 5 | RNVC: 9

8 Oct 1997

5340-14-518-0013
Webbing Strap

145180013
10558723: RNCC: 3 | RNVC: 2

21 Jan 2000

5340-14-461-1276
Access Cover

144611276
39063284: RNCC: 3 | RNVC: 2
39063284: RNCC: 5 | RNVC: 2

24 Feb 1993

5340-14-484-1173
Mounting Plate

144841173
HSS831AHB314: RNCC: 3 | RNVC: 2
89167034: RNCC: 5 | RNVC: 2

24 Oct 1996

5340-14-535-4384
Mounting Bracket

145354384
47079431: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-444-7426
Access Cover

144447426
123621406: RNCC: 3 | RNVC: 9

21 Jan 1991

5340-14-519-3393
Bow Handle

145193393
C252A3257101: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-396-9965
Access Cover

143969965
D2209010: RNCC: 3 | RNVC: 2
901260274: RNCC: 5 | RNVC: 2
901260274: RNCC: 5 | RNVC: 2
D2209010: RNCC: 5 | RNVC: 2

27 Nov 1984

5340-14-385-4043
Access Cover

143854043
0285325070: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-485-7120
Access Cover

144857120
16010035M: RNCC: 3 | RNVC: 2
16010030G: RNCC: 5 | RNVC: 2

6 Feb 1997

5340-14-480-7849
Loop Clamp

144807849
EN4113S06NR: RNCC: 2 | RNVC: 2

29 Mar 1996

5340-14-529-9608
Mounting Bracket

145299608
8003949M00: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-14-544-3088
Mounting Bracket

145443088
BAZ6521: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-14-523-6496
Angle Bracket

145236496
E45843: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-476-0396
Mounting Plate

144760396
0018300015: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-454-6112
Retaining Strap

144546112
0160730014: RNCC: 3 | RNVC: 2
0160730014: RNCC: 5 | RNVC: 2

8 Apr 1992

5340-14-257-9275
Angle Bracket

142579275
C246864: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-533-7870
Mounting Bracket

145337870
46063850: RNCC: 3 | RNVC: 2

25 Feb 2003

5340-14-467-2833
Angle Bracket

144672833
PS500GS: RNCC: 3 | RNVC: 2
613104: RNCC: 3 | RNVC: 2
CS500: RNCC: 5 | RNVC: 2
PS500GS: RNCC: 5 | RNVC: 2

24 Dec 1993

5340-14-571-2837
Coating Plate

145712837
1PM00275010: RNCC: 3 | RNVC: 2

8 Mar 2012

5340-14-317-5299
Webbing Strap

143175299
050728: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-383-1902
Angle Bracket

143831902
MY2051611630G01: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-550-4908
Angle Bracket

145504908
RA1M122111121A2: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-497-2973
Mounting Plate

144972973
10030936: RNCC: 3 | RNVC: 2
F300 0T 022 9698: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-550-4993
Mounting Bracket

145504993
RA1A701752311A1N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-506-7364
Mounting Plate

145067364
BB2588: RNCC: 3 | RNVC: 2

13 May 1998

5340-14-385-2815
Loop Clamp

143852815
397675: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-288-4088
Angle Bracket

142884088
0098030130: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-518-9937
Mounting Plate

145189937
707469: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-478-7049
Mounting Plate

144787049
4265918: RNCC: 3 | RNVC: 2
4265918: RNCC: 5 | RNVC: 9

20 Nov 1995

5340-14-441-0338
Anchor Strap

144410338
007625010P: RNCC: 3 | RNVC: 2

14 Aug 1990

5340-14-543-9686
Access Cover

145439686
4773126900: RNCC: 3 | RNVC: 9

19 Dec 2004

5340-14-445-1786
Mounting Bracket

144451786
561587: RNCC: 3 | RNVC: 2

4 Feb 1991

5340-14-487-5377
Synchro Clamp

144875377
RA1M287510127: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-447-8413
Angle Bracket

144478413
5000916025: RNCC: 3 | RNVC: 2

6 Jun 1991

5340-14-338-6217
Angle Bracket

143386217
0031137091: RNCC: 3 | RNVC: 2
0031137091: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-275-8704
Corner Brace

142758704
T66856M5P16: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-532-5980
Access Cover

145325980
P200001200: RNCC: 3 | RNVC: 2

18 Nov 2002

5340-14-521-9549
Angle Bracket

145219549
427691K: RNCC: 3 | RNVC: 2

27 Sep 2000

5340-14-381-7972
Access Cover

143817972
20114693: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-520-3639
Mounting Bracket

145203639
45834845: RNCC: 3 | RNVC: 9

17 May 2000

5340-14-518-0351
Loop Clamp

145180351
7705005153: RNCC: 3 | RNVC: 2

21 Jan 2000

5340-14-418-0468
Loop Clamp

144180468
1715-85: RNCC: 3 | RNVC: 2
9150257480: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-305-3655
Retaining Strap

143053655
561295: RNCC: 3 | RNVC: 2
5156129500: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-403-0044
Rim Lock Set

144030044
911BCLE41114: RNCC: 3 | RNVC: 2

25 Jul 1985

5340-14-303-8317
Mending Plate

143038317
27830DET5: RNCC: 3 | RNVC: 2
27830DET5: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-478-7240
Mounting Bracket

144787240
45274534: RNCC: 3 | RNVC: 2
45274534: RNCC: 3 | RNVC: 9

20 Nov 1995

5340-14-515-3467
Compression Cup

145153467
6743433819: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-320-6573
Angle Bracket

143206573
0000648605: RNCC: 3 | RNVC: 2
0000648605: RNCC: 5 | RNVC: 9
648605: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-368-1408
Bumper

143681408
A10-95-011-04-0: RNCC: 3 | RNVC: 2
A10-95-011-04-0: RNCC: 5 | RNVC: 2

19 Jan 1981

5340-14-324-2480
Butt Hinge

143242480
330A25-2161-00: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-552-1936
Swivel Caster

145521936
VP5BA125-23 B: RNCC: 3 | RNVC: 2
91857018: RNCC: 5 | RNVC: 2

1 Dec 2006

5340-14-458-7339
Arched Cushion

144587339
MAT169-0012F21DE8: RNCC: 3 | RNVC: 2

29 Oct 1992

5340-14-536-9854
Mounting Plate

145369854
8042-09: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-389-2107
Loop Clamp

143892107
F10A723204A1: RNCC: 3 | RNVC: 2
85-692-4424: RNCC: 6 | RNVC: 9

29 Nov 1983

5340-14-464-9555
Cover Strip

144649555
365A25-0034-27: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-391-7864
Angle Bracket

143917864
V2PT3243-120057: RNCC: 3 | RNVC: 2
V2PT3243-120057: RNCC: 5 | RNVC: 2

21 Mar 1984

5340-14-041-6314
Angle Bracket

140416314
121B71-270-09-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-332-7342
Access Cover

143327342
J05791-01-1300P020: RNCC: 3 | RNVC: 2
38868-1C1: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-268-9930
Handwheel

142689930
MAT137-005F6ACIER: RNCC: 3 | RNVC: 2
553-000MA060F7-2C1: RNCC: 5 | RNVC: 2
GSM137-007F10ACIER: RNCC: 5 | RNVC: 2
GSM137-07F10ACIER: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-377-2525
Rod End Clevis

143772525
366A57-5211-20: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-476-4545
Dashpot

144764545
24045-000-00: RNCC: 3 | RNVC: 2

14 Jun 1995

5340-14-306-6577
Loop Clamp

143066577
752-30AU4G: RNCC: 3 | RNVC: 2
752D30: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-269-4354
Rim Lock

142694354
NO PRIMARY REF14-269-4354: RNCC: 3 | RNVC: 2
263BT38F0UGA: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-512-6426
Bumper

145126426
NO PRIMARY REF14-512-6426: RNCC: 3 | RNVC: 2
NNP 5330860464666: RNCC: 5 | RNVC: 9

17 Feb 1999

5340-14-390-8602
Retaining Strap

143908602
ST159-2M311-1P42: RNCC: 3 | RNVC: 2

1 Mar 1984

5340-14-388-8061
Buckle

143888061
A2036-14: RNCC: 3 | RNVC: 9

29 Nov 1983

5340-14-384-2864
Bow Handle

143842864
10504-002P: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-505-9755
Mounting Plate

145059755
NO PRIMARY REF14-505-9755: RNCC: 3 | RNVC: 2
003635V: RNCC: 5 | RNVC: 9

2 Apr 1998

5340-14-529-5755
Bumper

145295755
330A87-2032-37: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-331-1807
Retaining Strap

143311807
CTS1-117-01: RNCC: 3 | RNVC: 2

2 Jul 1975

Load More Results