What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 45 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 45 of 446

5340-14-441-3571
Catch Strike

144413571
DA1D230321463A1: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-516-2599
Utility Access Door

145162599
99 08-101 D: RNCC: 3 | RNVC: 2

15 Sep 1999

5340-14-031-6811
Mounting Plate

140316811
J00790-03-2023P005: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-455-3673
Mounting Bracket

144553673
TID24332: RNCC: 3 | RNVC: 2

21 May 1992

5340-14-473-0541
Dashpot

144730541
434014-920: RNCC: 3 | RNVC: 2

7 Dec 1994

5340-14-423-9605
Angle Bracket

144239605
NO PRIMARY REF14-423-9605: RNCC: 3 | RNVC: 2
15763-4: RNCC: 5 | RNVC: 9

5 May 1988

5340-14-416-6840
Access Cover

144166840
413902030002: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-501-1582
Mounting Bracket

145011582
014-016-079: RNCC: 3 | RNVC: 2
014.016.079: RNCC: 3 | RNVC: 2
F300 0T 025 1984: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-242-2446
Retaining Strap

142422446
12230084-1: RNCC: 3 | RNVC: 2
6232-0227: RNCC: 5 | RNVC: 2
6003: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-332-2494
Access Cover

143322494
18310: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-476-6026
Access Cover

144766026
23CESLASMCRH007: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-14-202-3842
Access Cover

142023842
0000353602: RNCC: 3 | RNVC: 2
0000353602: RNCC: 5 | RNVC: 9
353602: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-14-553-8480
Utility Access Door

145538480
E18557: RNCC: 3 | RNVC: 2

23 May 2007

5340-14-566-0729
Utility Resilient Mount

145660729
706A37190006: RNCC: 1 | RNVC: 2
923GS55: RNCC: 3 | RNVC: 2

18 Oct 2010

5340-14-546-5922
Rod End Clevis

145465922
D68038: RNCC: 3 | RNVC: 2

20 Jul 2005

5340-14-433-9905
Plate Spacer

144339905
RP904047: RNCC: 3 | RNVC: 2

28 Aug 1989

5340-14-416-0450
Retaining Strap

144160450
BJM01529: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-553-1615
Mounting Bracket

145531615
0249967060: RNCC: 3 | RNVC: 2

8 Mar 2007

5340-14-545-1036
Detent Plunger

145451036
T322G1003233: RNCC: 3 | RNVC: 2

17 Mar 2005

5340-14-292-4393
Loop Clamp

142924393
341A41-1009-00: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-522-9753
Mounting Bracket

145229753
0319727700: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-14-212-1673
Mounting Bracket

142121673
321A21-0379-23: RNCC: 3 | RNVC: 2
85-691-2223: RNCC: 6 | RNVC: 9

5 Jul 1980

5340-14-409-2816
Loop Clamp

144092816
61100001063: RNCC: 3 | RNVC: 2
HB245N63: RNCC: 5 | RNVC: 2
85-693-2915: RNCC: 6 | RNVC: 9

26 May 1986

5340-14-381-2556
Surface Bolt

143812556
71478: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-479-7009
Retaining Strap

144797009
646378: RNCC: 3 | RNVC: 2

31 Jan 1996

5340-14-423-3201
Webbing Strap

144233201
JWAT39-03-04: RNCC: 3 | RNVC: 2

14 Apr 1988

5340-14-541-5143
Mounting Bracket

145415143
1091401-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-255-0382
Control Rod

142550382
1416046004: RNCC: 3 | RNVC: 2
0003017800: RNCC: 5 | RNVC: 2
0870153200: RNCC: 5 | RNVC: 2
1416046004: RNCC: 5 | RNVC: 2
3017800: RNCC: 5 | RNVC: 9
PZR51-1X: RNCC: 5 | RNVC: 9
0003017800: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-502-8040
Bow Handle

145028040
8T1784: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-501-0085
Metal Grille

145010085
10060086: RNCC: 3 | RNVC: 2
F300 0T 025 0380: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-452-7940
Loop Clamp

144527940
51213110020: RNCC: 3 | RNVC: 2
300G20: RNCC: 5 | RNVC: 2

21 Jan 1992

5340-14-333-7128
Rod End Clevis

143337128
091560: RNCC: 3 | RNVC: 2
091560W: RNCC: 5 | RNVC: 2

23 Apr 1976

5340-14-385-8785
Retaining Strap

143858785
81719: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-416-0447
Retaining Strap

144160447
BJM01523: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-408-9071
Anchor Strap

144089071
969358: RNCC: 3 | RNVC: 2
969358: RNCC: 5 | RNVC: 9

2 Apr 1986

5340-14-365-4060
Access Cover

143654060
19287201: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-504-3070
Access Cover

145043070
3701239M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-387-8968
Loop Clamp

143878968
DAS073: RNCC: 3 | RNVC: 2
78723DH12: RNCC: 5 | RNVC: 2
ATP12A: RNCC: 5 | RNVC: 2

12 Oct 1983

5340-14-281-2469
Rod End Clevis

142812469
121E21-610-17-0: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-528-8475
Bail Handle

145288475
CR 495232: RNCC: 3 | RNVC: 2
PLN495000 IND.E 13/08/01 REP11: RNCC: 5 | RNVC: 2
X.495232: RNCC: 5 | RNVC: 2

20 Feb 2002

5340-14-459-2706
Mounting Bracket

144592706
0176-564003-0: RNCC: 3 | RNVC: 2
85-693-8290: RNCC: 6 | RNVC: 9

19 Nov 1992

5340-14-288-8718
Retaining Strap

142888718
14-113-1-00-03: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-530-6070
Mounting Plate

145306070
888-380-503-0: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-14-441-3809
Loop Clamp

144413809
121B26-300-10-0: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-277-7720
Quick Release Pin

142777720
SA13-1-01-01-128: RNCC: 3 | RNVC: 2
SA131-01-01-128: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-550-6490
Utility Access Door

145506490
6045-227-000A: RNCC: 3 | RNVC: 2

5 Jul 2006

5340-14-542-0276
Access Cover

145420276
20054-745: RNCC: 3 | RNVC: 2
502106005014A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-425-2008
Bow Handle

144252008
4225-421B530: RNCC: 3 | RNVC: 2
4225-421B530: RNCC: 5 | RNVC: 2

24 Jun 1988

5340-14-456-8721
Arched Cushion

144568721
MAT169-0012F20DE13: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-14-358-7194
Swivel Caster

143587194
NO PRIMARY REF14-358-7194: RNCC: 3 | RNVC: 2
9560131150: RNCC: 5 | RNVC: 2
2120BV32P1-5: RNCC: 5 | RNVC: 9

7 Sep 1979

5340-14-517-0733
Stand Base

145170733
BM-SEMAPP-LCLR-1: RNCC: 3 | RNVC: 2

3 Nov 1999

5340-14-413-1507
Angle Bracket

144131507
23115537-3: RNCC: 3 | RNVC: 2
23115537: RNCC: 5 | RNVC: 2

26 Nov 1986

5340-14-446-8367
Quick Release Pin

144468367
3352-908: RNCC: 3 | RNVC: 2
3352 908: RNCC: 5 | RNVC: 2
3805: RNCC: 5 | RNVC: 2

17 Apr 1991

5340-14-356-6653
Loop Clamp

143566653
EA1M713-12-810: RNCC: 3 | RNVC: 2

15 May 1979

5340-14-438-2764
Webbing Strap

144382764
815-0-79-989: RNCC: 3 | RNVC: 2

12 Mar 1990

5340-14-530-0177
Rim Latch Set

145300177
885HP: RNCC: 3 | RNVC: 2
601-296: RNCC: 5 | RNVC: 2

30 Apr 2002

5340-14-220-1398
Cover Strip

142201398
3160S25-23-025: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-462-0576
Retaining Strap

144620576
404 404.180: RNCC: 3 | RNVC: 2
LNG4 18-18PA: RNCC: 5 | RNVC: 2
5005005064: RNCC: 5 | RNVC: 2
LNG4 18-18PA: RNCC: 5 | RNVC: 2
LNG418-18PA: RNCC: 5 | RNVC: 2

31 Mar 1993

5340-14-444-5457
Plug Button

144445457
ZB2-SZ3: RNCC: 3 | RNVC: 2
ZB2SZ3: RNCC: 5 | RNVC: 2
91628683: RNCC: 5 | RNVC: 2
230-2156: RNCC: 5 | RNVC: 2
5000786577: RNCC: 5 | RNVC: 2
3389110614602: RNCC: 5 | RNVC: 2
5546471: RNCC: 5 | RNVC: 9
ZB2SZ3: RNCC: 5 | RNVC: 9

15 Jan 1991

5340-14-387-7570
Angle Bracket

143877570
ST159-2M21P42: RNCC: 3 | RNVC: 2
J05087-021-1000P042: RNCC: 3 | RNVC: 2
ST159-2M21P42A: RNCC: 5 | RNVC: 2

12 Oct 1983

5340-14-459-6656
Arched Cushion

144596656
MAT169-0012F19DE17: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-442-7799
Arched Cushion

144427799
BA30089050-25: RNCC: 2 | RNVC: 2

5 Nov 1990

5340-14-397-1872
Runner

143971872
TB30-27226-101: RNCC: 3 | RNVC: 2

1 Dec 1984

5340-14-466-5417
Mounting Plate

144665417
40-6-4A5-194: RNCC: 3 | RNVC: 2
89234658: RNCC: 5 | RNVC: 2

15 Nov 1993

5340-14-549-6824
Strap End Clip

145496824
MC201-218002-30: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-14-324-0366
Access Cover

143240366
773-413-043FF4: RNCC: 3 | RNVC: 2
773-413-043FF4: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-297-7453
Access Cover

142977453
NO PRIMARY REF14-297-7453: RNCC: 3 | RNVC: 2
23242-1TER: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-316-6160
Synchro Clamp

143166160
5547012-97: RNCC: 3 | RNVC: 2
85-595-5672: RNCC: 6 | RNVC: 9

31 Jan 1996

5340-14-473-3775
Runner

144733775
332A21-3267-00: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-363-9055
Access Cover

143639055
M376-310113: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-292-5548
Angle Bracket

142925548
121E26-800-26-1: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-467-7855
Catch Strike

144677855
S1PT00000123126: RNCC: 3 | RNVC: 2
S1PT00000123126: RNCC: 5 | RNVC: 2

27 Jan 1994

5340-14-386-9191
Barrel Bolt

143869191
5340CJVERR0UBAI0NNETTEB0XD16X100: RNCC: 2 | RNVC: 2

24 Aug 1983

5340-14-354-2355
Catch Strike

143542355
16320826: RNCC: 3 | RNVC: 2
16320826: RNCC: 5 | RNVC: 9

30 Jan 1979

5340-14-369-9364
Catch Strike

143699364
206369: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-496-9152
Mounting Plate

144969152
490127-32020-24: RNCC: 3 | RNVC: 2
F300 0T 022 2649: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-233-3365
Loop Clamp

142333365
3180S50-50-019: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-286-5314
Pipe Hanger

142865314
R4A711-072: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-549-8801
Angle Bracket

145498801
2093261-001: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-464-3497
Access Cover

144643497
705803-00: RNCC: 3 | RNVC: 2
89297823: RNCC: 5 | RNVC: 2

28 Jul 1993

5340-14-446-4164
Support Hook

144464164
29-04464GA: RNCC: 3 | RNVC: 2
5000991850: RNCC: 3 | RNVC: 2
2403GA: RNCC: 5 | RNVC: 9

19 Mar 1991

5340-14-511-3594
Section Block Clamp

145113594
F702-33-02: RNCC: 3 | RNVC: 2

16 Dec 1998

5340-14-527-9277
Metal Grille

145279277
330A62-1043-00: RNCC: 3 | RNVC: 2

28 Nov 2001

5340-14-369-1230
Loop Clamp

143691230
ADP2-30-820: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-490-1940
Retaining Strap

144901940
650-791-091-0: RNCC: 3 | RNVC: 2

17 Sep 1997

5340-14-542-1297
Mounting Plate

145421297
5302835-035-01-A: RNCC: 3 | RNVC: 2
5302835-035-01A: RNCC: 5 | RNVC: 2

7 Jul 2004

5340-14-367-4644
Angle Bracket

143674644
A11A221160261: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-503-7331
Mortise Lock

145037331
1109-U3: RNCC: 3 | RNVC: 2
CAE01593: RNCC: 5 | RNVC: 2
1109U3: RNCC: 5 | RNVC: 2

28 Jan 1998

5340-14-486-5641
Mounting Bracket

144865641
121A26-006-02-0: RNCC: 3 | RNVC: 2

24 Mar 1997

5340-14-499-5111
Rim Lock

144995111
21-04325DR: RNCC: 3 | RNVC: 2
Z1-04325DR: RNCC: 3 | RNVC: 2
21-04325-DR: RNCC: 5 | RNVC: 2
2104325DR: RNCC: 5 | RNVC: 2
F300 0T 023 0533: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-518-2114
Pipe Hanger

145182114
307-800-206-0: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-201-9209
Retaining Strap

142019209
574-155-070-0: RNCC: 3 | RNVC: 2

1 Jan 1962

5340-14-325-7315
Retaining Strap

143257315
501-790-512-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-448-8199
Rod End Clevis

144488199
4-014439: RNCC: 3 | RNVC: 2
4169-3000: RNCC: 5 | RNVC: 2

10 Jul 1991

5340-14-311-6715
T Plate

143116715
319A25-28-082: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-512-5346
Section Block Clamp

145125346
FB1A702-25-01: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-453-7022
Mounting Bracket

144537022
T20-13F9-20V1: RNCC: 3 | RNVC: 2

5 Mar 1992

5340-14-364-0936
Angle Bracket

143640936
366A24-0100-45: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-459-2514
Section Block Clamp

144592514
F706-78-01: RNCC: 3 | RNVC: 2

19 Nov 1992

5340-14-501-4358
Mounting Bracket

145014358
460558: RNCC: 3 | RNVC: 2
132088IP239A: RNCC: 5 | RNVC: 2
460558-001: RNCC: 5 | RNVC: 9

29 Oct 1997

5340-14-462-8993
Mounting Plate

144628993
JVCIT03-11: RNCC: 3 | RNVC: 2
89470274: RNCC: 5 | RNVC: 2

5 May 1993

5340-14-235-3430
Rod End Clevis

142353430
G2-105B: RNCC: 3 | RNVC: 2
G2-105B: RNCC: 5 | RNVC: 2
G2-105B: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-402-3578
Mending Plate

144023578
AE159-1M16-01F84: RNCC: 3 | RNVC: 2

3 Jul 1985

5340-14-403-4729
Retaining Clip

144034729
NO PRIMARY REF14-403-4729: RNCC: 3 | RNVC: 2
P3H010875-00: RNCC: 5 | RNVC: 9

21 Aug 1985

5340-14-228-4248
Webbing Strap

142284248
NT46-06JANV62P3PAR348: RNCC: 2 | RNVC: 1
CCP2044/2761: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-331-7391
Angle Bracket

143317391
330A21-2152-20: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-489-8443
Mounting Bracket

144898443
341A69-6633-00: RNCC: 3 | RNVC: 2
341A69663300: RNCC: 5 | RNVC: 2

26 Aug 1997

5340-14-410-8632
Runner

144108632
NO PRIMARY REF14-410-8632: RNCC: 3 | RNVC: 2
13851-4: RNCC: 5 | RNVC: 9

22 Jul 1986

5340-14-473-8122
Angle Bracket

144738122
332A21-1297-25: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-465-4943
Mounting Bracket

144654943
365A57-3320-20: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-042-1971
Angle Bracket

140421971
127029-00: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-472-6764
Loop Clamp

144726764
679-165521: RNCC: 3 | RNVC: 2
91486899: RNCC: 5 | RNVC: 2
PUR679-165521: RNCC: 5 | RNVC: 9

9 Nov 1994

5340-14-465-5095
Plate Spacer

144655095
365A87-3188-20: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-336-3814
Corner Brace

143363814
341A11-1051-20: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-299-9864
Buckle

142999864
11626-032: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-510-1162
Access Cover

145101162
F293-62RS1: RNCC: 3 | RNVC: 2
1560AA8008186: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-349-8645
Lock-Release Lever

143498645
NO PRIMARY REF14-349-8645: RNCC: 3 | RNVC: 2
AS17638: RNCC: 5 | RNVC: 9

14 Jun 1978

5340-14-359-6047
Mending Plate

143596047
140025934: RNCC: 3 | RNVC: 2
140025934: RNCC: 5 | RNVC: 2

15 Oct 1979

5340-14-280-0552
Loop Clamp

142800552
51111905009: RNCC: 3 | RNVC: 2
Z00.N7141381009: RNCC: 5 | RNVC: 2
25P9: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-359-5912
Mending Plate

143595912
50708: RNCC: 3 | RNVC: 2
50708: RNCC: 5 | RNVC: 9

15 Oct 1979

5340-14-555-6220
Swivel Caster

145556220
HP5BD125-11R: RNCC: 3 | RNVC: 2

3 Dec 2007

5340-14-529-7764
Access Cover

145297764
8006672T01: RNCC: 3 | RNVC: 2

10 Apr 2002

5340-14-200-7793
Clamping Catch

142007793
7014: RNCC: 3 | RNVC: 2
7014-71187: RNCC: 5 | RNVC: 2
7014AVEC CROCHET: RNCC: 5 | RNVC: 2
BAZ2486: RNCC: 5 | RNVC: 2
T0P7B448: RNCC: 5 | RNVC: 2
TOP7B448: RNCC: 5 | RNVC: 2

1 Jan 1962

5340-14-487-5574
Mounting Plate

144875574
78786-050-15F: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-526-0755
Arched Cushion

145260755
E1M369930: RNCC: 3 | RNVC: 2
MAT169-0024F4FORTERAIDEUR: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-14-420-6500
Rim Lock Set

144206500
135POC1B: RNCC: 3 | RNVC: 2
L08520-22: RNCC: 5 | RNVC: 2

16 Dec 1987

5340-14-471-9315
Angle Bracket

144719315
312-08262-001: RNCC: 3 | RNVC: 2

28 Sep 1994

5340-14-429-5863
Loop Holder

144295863
JVCIT03-03: RNCC: 3 | RNVC: 2
89407135: RNCC: 5 | RNVC: 2

1 Feb 1989

5340-14-303-8273
Control Rod

143038273
NO PRIMARY REF14-303-8273: RNCC: 3 | RNVC: 2
504223: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-397-4478
Butt Hinge

143974478
CP302060-50: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-472-0955
Mounting Bracket

144720955
462-11017-000: RNCC: 3 | RNVC: 2

5 Oct 1994

5340-14-431-0329
Fusible Plug

144310329
NO PRIMARY REF14-431-0329: RNCC: 3 | RNVC: 2
12-696-200: RNCC: 5 | RNVC: 9

29 Mar 1989

5340-14-496-9146
Mounting Plate

144969146
490127-32020-17: RNCC: 3 | RNVC: 2
F300 0T 022 2643: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-363-8911
Retaining Band

143638911
NO PRIMARY REF14-363-8911: RNCC: 3 | RNVC: 2
Z45988: RNCC: 5 | RNVC: 9

7 Aug 1980

5340-14-277-8576
Cover Strip

142778576
3160S25-11-023-51: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-339-9286
Handle Grip

143399286
T476-47: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-428-4790
Loop Clamp

144284790
75109-32: RNCC: 3 | RNVC: 2
CDM2-32: RNCC: 5 | RNVC: 2

8 Dec 1988

5340-14-296-3510
Doorknob

142963510
CAP10-10-19-07: RNCC: 3 | RNVC: 9

1 Jan 1973

5340-14-388-8117
Angle Bracket

143888117
11-981-200: RNCC: 3 | RNVC: 2
11-981-200: RNCC: 5 | RNVC: 9

29 Nov 1983

5340-14-454-5366
Mounting Bracket

144545366
2085-09-009: RNCC: 3 | RNVC: 2
89411748: RNCC: 5 | RNVC: 9

2 Apr 1992

5340-14-435-9583
Mounting Bracket

144359583
332A21-1959-00: RNCC: 3 | RNVC: 2

29 Nov 1989

5340-14-343-9537
Angle Bracket

143439537
262-12-81115-01: RNCC: 3 | RNVC: 2
85-689-3663: RNCC: 6 | RNVC: 9

13 Jul 1977

5340-14-465-3639
Angle Bracket

144653639
11-100-023: RNCC: 3 | RNVC: 2
D893: RNCC: 5 | RNVC: 9

22 Sep 1993

5340-14-549-6377
Utility Access Door

145496377
JCB 10 136-308: RNCC: 3 | RNVC: 2

24 Apr 2006

5340-14-553-5464
Mounting Plate

145535464
3396-50-03: RNCC: 3 | RNVC: 2

16 Apr 2007

5340-14-401-7348
Rim Lock Set

144017348
514-00: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-526-9442
Cover Strip

145269442
SZ00.250.245: RNCC: 3 | RNVC: 2
00-250-245: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-485-5721
Mounting Bracket

144855721
332A91-0050-10: RNCC: 3 | RNVC: 2

29 Jan 1997

5340-14-417-4731
Butt Hinge

144174731
MY20281-34843: RNCC: 3 | RNVC: 2

8 Jul 1987

5340-14-442-0132
Mounting Plate

144420132
332P67-1839-00: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-362-6757
Loop Clamp

143626757
620-854-941-0: RNCC: 3 | RNVC: 2
85-691-0949: RNCC: 6 | RNVC: 9

19 Mar 1980

5340-14-553-7239
Pawl Fastener

145537239
E3-102-065: RNCC: 3 | RNVC: 2

15 May 2007

5340-14-010-0186
Cover Strip

140100186
3130S25-10-023: RNCC: 3 | RNVC: 2
3130S25-10-023-1: RNCC: 3 | RNVC: 2

1 Jan 1961

5340-14-372-7048
Rod End Clevis

143727048
121E95-118-74-0: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-262-4818
Loop Clamp

142624818
321A69-1048-00: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-531-7322
Corner Brace

145317322
330A21-2296-21: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-14-294-3041
Doorstop

142943041
330A58-2207-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-455-9151
Synchro Clamp

144559151
PM1A718562001: RNCC: 3 | RNVC: 2
PM1A718562001: RNCC: 5 | RNVC: 2
85-694-7851: RNCC: 6 | RNVC: 9

11 Jun 1992

5340-14-569-7346
Utility Access Door

145697346
730010S942-10B: RNCC: 3 | RNVC: 2

18 Oct 2011

5340-14-533-1803
Mounting Plate

145331803
915-661: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-14-403-5481
Mending Plate

144035481
3511 180 68901: RNCC: 3 | RNVC: 2
3511-180-68901: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-311-1033
Threaded Rod End

143111033
F433-1DET7: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-376-5859
Quick Release Pin

143765859
524-57-005: RNCC: 3 | RNVC: 2
52457005: RNCC: 5 | RNVC: 2
52-10-1041: RNCC: 5 | RNVC: 2
524-57-005: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-512-1757
Mounting Bracket

145121757
A320-288: RNCC: 3 | RNVC: 2

8 Feb 1999

5340-14-324-3678
Access Cover

143243678
NO PRIMARY REF14-324-3678: RNCC: 3 | RNVC: 2
0003459809: RNCC: 5 | RNVC: 2
0003459809: RNCC: 5 | RNVC: 9
3459809: RNCC: 5 | RNVC: 9
353879: RNCC: 5 | RNVC: 9
362883: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-473-8601
Mounting Bracket

144738601
332A87-0245-00: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-387-8951
Loop Clamp

143878951
3-2607-01-16A: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-324-1850
Handle Grip

143241850
NO PRIMARY REF14-324-1850: RNCC: 3 | RNVC: 2
P3098: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-312-8662
Rod End Clevis

143128662
160-18229-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-542-0316
Mounting Plate

145420316
20061-101: RNCC: 3 | RNVC: 2
502118008014A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-200-4384
Strap Fastener Loop

142004384
AMG10745-2: RNCC: 3 | RNVC: 2

1 Jan 1962

5340-14-551-5200
Butt Hinge

145515200
730010S100-32A: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-275-2938
Plug Button

142752938
Q3-3U8Z6: RNCC: 3 | RNVC: 2
1746: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-489-6214
Angle Bracket

144896214
332A61-1256-20: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-489-5178
Butt Hinge

144895178
NO PRIMARY REF14-489-5178: RNCC: 3 | RNVC: 2
2153-4224000: RNCC: 5 | RNVC: 2
2153-4224000: RNCC: 5 | RNVC: 9
F300 0T 022 1392: RNCC: 6 | RNVC: 9

30 Jul 1997

5340-14-335-3681
Retaining Strap

143353681
100SP55-0013: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-549-6082
Mounting Bracket

145496082
169E697-00: RNCC: 3 | RNVC: 2

21 Apr 2006

5340-14-497-7146
Loop Clamp

144977146
701-432000-901-0: RNCC: 3 | RNVC: 2

15 Oct 1997

5340-14-396-3118
Clamping Catch

143963118
GE.11-ZB: RNCC: 3 | RNVC: 2
GE11ZB: RNCC: 5 | RNVC: 2

27 Nov 1984

5340-14-264-1745
Loop Clamp

142641745
55219-312D507DB: RNCC: 3 | RNVC: 2
55219-312-001DB: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-398-1107
Bridge Clamp

143981107
39086125: RNCC: 1 | RNVC: 2
NO PRIMARY REF14-398-1107: RNCC: 3 | RNVC: 2
39086125: RNCC: 5 | RNVC: 9
A18AP0050-099: RNCC: 5 | RNVC: 9

31 Jan 1985

5340-14-430-4347
Detent Plunger

144304347
NO PRIMARY REF14-430-4347: RNCC: 3 | RNVC: 2
5000813707: RNCC: 5 | RNVC: 2
E967-373: RNCC: 5 | RNVC: 9

22 Mar 1989

5340-14-448-3294
Mounting Plate

144483294
A4H23468-72301: RNCC: 3 | RNVC: 2

25 Jun 1991

5340-14-403-4813
Loop Clamp

144034813
NO PRIMARY REF14-403-4813: RNCC: 3 | RNVC: 2
P4H019175-00: RNCC: 5 | RNVC: 9

21 Aug 1985

5340-14-449-1066
Mounting Plate

144491066
81011-27: RNCC: 3 | RNVC: 2

29 Jul 1991

5340-14-312-5004
Sliding Door Track

143125004
A10-23-813-01-2: RNCC: 3 | RNVC: 2
A10-23-813-01-2: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-534-1373
Mounting Bracket

145341373
332P87-2022-88: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-385-3179
Doorstop

143853179
365A25-3175-01: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-475-5053
Mounting Bracket

144755053
TB1030101F022: RNCC: 3 | RNVC: 2
TB1030101-00SPF022: RNCC: 5 | RNVC: 2
08-60-0047: RNCC: 5 | RNVC: 9

12 Apr 1995

5340-14-455-6801
Access Cover

144556801
21352904-00: RNCC: 3 | RNVC: 2

10 Jun 1992

5340-14-460-0446
Bumper

144600446
02540004010: RNCC: 3 | RNVC: 2
15-026: RNCC: 5 | RNVC: 2
254004-10: RNCC: 5 | RNVC: 2
3597470019313: RNCC: 5 | RNVC: 2
91620853: RNCC: 5 | RNVC: 2

7 Jan 1993

5340-14-447-1188
Access Cover

144471188
21308643: RNCC: 3 | RNVC: 2
21308643-1: RNCC: 5 | RNVC: 2

3 May 1991

5340-14-361-4759
Mending Plate

143614759
NO PRIMARY REF14-361-4759: RNCC: 3 | RNVC: 2
323269: RNCC: 5 | RNVC: 9

24 Jan 1980

5340-14-339-4026
Retaining Strap

143394026
M3E221-15-827: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-261-3580
Mounting Bracket

142613580
253-5M364P86F: RNCC: 3 | RNVC: 9
PA253-5M364P86F: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-452-3102
Runner

144523102
M275-9047: RNCC: 3 | RNVC: 2
M275-9047: RNCC: 5 | RNVC: 2

8 Jan 1992

5340-14-443-5669
Bumper

144435669
4225-421A393: RNCC: 3 | RNVC: 2
4225-421A393: RNCC: 5 | RNVC: 2

28 Nov 1990

5340-14-411-4211
Angle Bracket

144114211
553-0321-107: RNCC: 3 | RNVC: 2
SCHD560100033: RNCC: 5 | RNVC: 2
SCHD560100033: RNCC: 5 | RNVC: 9

6 Aug 1986

5340-14-210-3554
Loop Clamp

142103554
NSE552-12-118XC18SZP80: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-388-1552
Butt Hinge

143881552
J36-190-90X70LAIT0N: RNCC: 2 | RNVC: 2
5340CECHARNIERELAIT90X70: RNCC: 5 | RNVC: 9

12 Oct 1983

5340-14-287-6064
Rod End Connector

142876064
A10-76-254-05-0: RNCC: 3 | RNVC: 2
A10-76-254-05-0: RNCC: 3 | RNVC: 2
A10-76-254-05-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-293-7681
Loop Clamp

142937681
NO PRIMARY REF14-293-7681: RNCC: 3 | RNVC: 2
17-600-18: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-502-6551
Access Cover

145026551
243-32640-08: RNCC: 3 | RNVC: 2
243-32640-08: RNCC: 5 | RNVC: 2

17 Dec 1997

5340-14-440-3124
Butt Hinge

144403124
332A58-1649-20: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-501-2121
Mounting Plate

145012121
412417-201-22-03-90: RNCC: 3 | RNVC: 2
412417-201.22.03.90: RNCC: 3 | RNVC: 2
F300 0T 025 2526: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-301-4464
Butt Hinge

143014464
P26-306-110X50DS0UDEEAC: RNCC: 2 | RNVC: 2

1 Jan 1973

5340-14-383-5981
Tubular Fairlead

143835981
TB30-27197-000: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-284-7696
Mending Plate

142847696
121A21-403-17-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-464-7744
Cover Strip

144647744
365A72-1138-21: RNCC: 3 | RNVC: 2

1 Sep 1993

5340-14-456-8734
Arched Cushion

144568734
MAT169-0012F20DE28: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-14-532-6104
Access Cover

145326104
79005-177: RNCC: 3 | RNVC: 2

20 Nov 2002

5340-14-302-8966
Control Rod

143028966
773-410-213DET12MATIEREA56: RNCC: 3 | RNVC: 2
773-410-213DET12MATIEREA56: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-549-6091
Mounting Plate

145496091
CC201-615200-32: RNCC: 3 | RNVC: 2

21 Apr 2006

5340-14-334-1166
Mending Plate

143341166
880-11-0-089-1: RNCC: 3 | RNVC: 2

23 Apr 1976

5340-14-213-9986
Rod End Clevis

142139986
L36-163D5GFF303SE: RNCC: 2 | RNVC: 2
176-91-33G: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-266-1085
Bumper

142661085
EIR000-14: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-374-6163
Angle Bracket

143746163
7380-36: RNCC: 3 | RNVC: 9

30 Jan 1982

5340-14-401-5632
Protection Bellows

144015632
350A27-1524-01: RNCC: 3 | RNVC: 2
86D35: RNCC: 3 | RNVC: 2
86D35: RNCC: 5 | RNVC: 9

13 Jun 1985

5340-14-201-0559
Clamping Catch

142010559
7005AZ: RNCC: 3 | RNVC: 2
70-05: RNCC: 5 | RNVC: 2
8292-88X24: RNCC: 5 | RNVC: 2
7005: RNCC: 5 | RNVC: 2

1 Jan 1962

5340-14-420-8209
Synchro Clamp

144208209
000082: RNCC: 3 | RNVC: 2
85-693-6796: RNCC: 6 | RNVC: 9

16 Dec 1987

5340-14-438-1494
Mounting Plate

144381494
330A21-0443-24: RNCC: 3 | RNVC: 2

7 Mar 1990

5340-14-297-3217
Threaded Rod End

142973217
501-700-654-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-497-5662
Mounting Plate

144975662
NO PRIMARY REF14-497-5662: RNCC: 3 | RNVC: 2
3-014-11-10311-01: RNCC: 5 | RNVC: 9
F300 0T 023 3681: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-470-8272
Cover Strip

144708272
T700A5610005901: RNCC: 3 | RNVC: 2

6 Jul 1994

5340-14-524-0638
Mounting Bracket

145240638
8019487F00: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-14-436-2103
Mounting Plate

144362103
DA2C228652001A1: RNCC: 3 | RNVC: 2

6 Dec 1989

5340-14-549-4171
Angle Bracket

145494171
21252403-00: RNCC: 3 | RNVC: 2
21252403-6: RNCC: 5 | RNVC: 2

31 Mar 2006

5340-14-526-8344
Mounting Plate

145268344
5010527410: RNCC: 3 | RNVC: 2

7 Sep 2001

5340-14-438-5973
Mending Plate

144385973
TB1030419: RNCC: 3 | RNVC: 2

28 Mar 1990

5340-14-351-9899
Retaining Strap

143519899
62506-367-690NP: RNCC: 3 | RNVC: 2
62506-367-690NP: RNCC: 5 | RNVC: 2

16 Oct 1978

5340-14-434-0337
Mounting Bracket

144340337
538852: RNCC: 3 | RNVC: 2

29 Aug 1989

5340-14-310-2543
Detent Plunger

143102543
NO PRIMARY REF14-310-2543: RNCC: 3 | RNVC: 2
23845DETV: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-533-9827
Mounting Bracket

145339827
10653100: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-398-6428
Webbing Strap

143986428
E96-5M: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-318-8702
Access Cover

143188702
R00481-08: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-369-2779
Synchro Clamp

143692779
S2223-1DG: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-472-8976
Loop Clamp

144728976
332A84-1247-20: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-409-4282
Access Cover

144094282
NO PRIMARY REF14-409-4282: RNCC: 3 | RNVC: 2
D20-33399: RNCC: 5 | RNVC: 9

28 May 1986

5340-14-241-7668
Rod End Clevis

142417668
1050-75-021-76-0: RNCC: 3 | RNVC: 2
75-021-76-0: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-519-3682
Mounting Plate

145193682
350A77-1200-28: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-354-5847
Angle Bracket

143545847
A10-63-449-03-0: RNCC: 3 | RNVC: 2
A10-63-449-03-0: RNCC: 5 | RNVC: 2
85-800-6965: RNCC: 6 | RNVC: 9

31 Jan 1979

5340-14-314-2689
Angle Bracket

143142689
341A21-1013-50: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-369-1682
Rod End Connector

143691682
365A91-2155-49: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-411-1439
Rod End Connector

144111439
332A84-1168-2051: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-422-1541
Bow Handle

144221541
4-012-0027: RNCC: 3 | RNVC: 2

24 Feb 1988

5340-14-463-9936
Access Cover

144639936
627008561: RNCC: 3 | RNVC: 2
6270-08561: RNCC: 5 | RNVC: 2

7 Jul 1993

5340-14-383-0959
Pipe Hanger

143830959
303-928-602-0: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-389-0581
Retaining Strap

143890581
TB30-45068-100: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-576-8324
Utility Access Door

145768324
B81402000000: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-14-463-9065
Loop Clamp

144639065
F0143-009F18TAB1DE21,3: RNCC: 3 | RNVC: 2
MAT169-0007F7: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-14-496-9192
Mounting Bracket

144969192
492126-34104-00: RNCC: 3 | RNVC: 2
F300 0T 022 2689: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-430-5749
Cover Strip

144305749
PM1A227000019: RNCC: 3 | RNVC: 2
PM1A227000019: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-328-8335
Mending Plate

143288335
M062745: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-425-3507
Loop Clamp

144253507
25GE14-4: RNCC: 3 | RNVC: 2
NSA5516-16N: RNCC: 5 | RNVC: 2
NSA5516-16N: RNCC: 5 | RNVC: 2
PF14-3CN14-4: RNCC: 5 | RNVC: 9

30 Jun 1988

5340-14-537-1790
Self-Locking Insert

145371790
MAT214-1427F26: RNCC: 3 | RNVC: 2

10 Oct 2003

5340-14-338-1516
Leaf Spring

143381516
NO PRIMARY REF14-338-1516: RNCC: 3 | RNVC: 2
471457: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-14-541-9089
Expansion Shield

145419089
45032/0: RNCC: 3 | RNVC: 2
HPS6/12: RNCC: 5 | RNVC: 2
SC086060: RNCC: 6 | RNVC: 9

2 Jul 2004

5340-14-292-5558
Angle Bracket

142925558
121E26-800-53-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-473-8591
Mounting Plate

144738591
332A76-6440-21: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-321-6954
Angle Bracket

143216954
NO PRIMARY REF14-321-6954: RNCC: 3 | RNVC: 2
TB1904EQUERREC0MBLEARTICULE: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-330-3422
Mending Plate

143303422
AY142-393A: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-317-2540
Rigid Caster

143172540
063W25-000000-03A1: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-532-9498
Engine Plate

145329498
9800245-10: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-14-541-2194
Access Cover

145412194
11105331: RNCC: 3 | RNVC: 2
8194893-001: RNCC: 5 | RNVC: 2

19 May 2004

5340-14-467-2846
Mounting Bracket

144672846
S16-201501: RNCC: 3 | RNVC: 2
S16-201501: RNCC: 5 | RNVC: 2
S16-201501: RNCC: 5 | RNVC: 9
F300 0T 014 6221: RNCC: 6 | RNVC: 9

3 Jan 1994

5340-14-565-8558
Utility Resilient Mount

145658558
21301644: RNCC: 3 | RNVC: 2
ZSS213016-44: RNCC: 5 | RNVC: 2
28511089: RNCC: 5 | RNVC: 2

29 Sep 2010

5340-14-419-7061
Rod End Clevis

144197061
M363-07561: RNCC: 3 | RNVC: 2

5 Nov 1987

5340-14-469-7135
Bumper

144697135
704A33-633-181: RNCC: 1 | RNVC: 2
579093: RNCC: 3 | RNVC: 2

4 May 1994

5340-14-307-0194
Retaining Strap

143070194
B00259-22: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-417-1225
Retaining Strap

144171225
BAZ97124: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-14-473-8295
Mounting Bracket

144738295
332A57-2193-20: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-370-6952
Mounting Plate

143706952
ES40774A: RNCC: 3 | RNVC: 2
ES40774A: RNCC: 5 | RNVC: 2
ES40774A: RNCC: 5 | RNVC: 9

5 Jun 1981

5340-14-470-0223
Mounting Bracket

144700223
164867: RNCC: 3 | RNVC: 2
89170061: RNCC: 5 | RNVC: 2

25 May 1994

5340-14-529-5907
Flush Catch Claw

145295907
330A87-2949-21: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-332-0891
Retaining Strap

143320891
8500-2403: RNCC: 3 | RNVC: 2
8500-411: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-443-5550
Mounting Plate

144435550
PA497-15-M3-P155: RNCC: 3 | RNVC: 2
PA467-15-M3-P155: RNCC: 5 | RNVC: 9

28 Nov 1990

5340-14-446-1626
Access Cover

144461626
2899-006: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-522-6911
Clamping Catch

145226911
6004-U25-PC: RNCC: 3 | RNVC: 2
81.25.43: RNCC: 5 | RNVC: 2
812543: RNCC: 5 | RNVC: 2
CAE01793: RNCC: 5 | RNVC: 2

15 Nov 2000

5340-14-467-6616
Rod End Clevis

144676616
401137: RNCC: 3 | RNVC: 2
401137-001: RNCC: 5 | RNVC: 9

19 Jan 1994

5340-14-495-6652
Mounting Plate

144956652
A44414-38: RNCC: 3 | RNVC: 2
A4441438: RNCC: 5 | RNVC: 2
F300 0T 019 5978: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-387-4430
Tubular Fairlead

143874430
TB30-27283-100: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-14-315-2876
Mounting Plate

143152876
PE2-005-145: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-234-4369
Angle Bracket

142344369
NO PRIMARY REF14-234-4369: RNCC: 3 | RNVC: 2
TB1904EQUERREDESABLIERE: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-417-1599
Access Cover

144171599
366A08-0108-30: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-14-359-6572
Rim Lock Set

143596572
NO PRIMARY REF14-359-6572: RNCC: 3 | RNVC: 2
942874: RNCC: 5 | RNVC: 9

15 Oct 1979

5340-14-435-8295
Mounting Plate

144358295
332A34-1061-21: RNCC: 3 | RNVC: 2

22 Nov 1989

5340-14-484-8127
Mounting Bracket

144848127
332P62-1607-22: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-523-8830
Blank Panel

145238830
546550-001: RNCC: 3 | RNVC: 9

8 Feb 2001

5340-14-464-8267
Mortise Lock Set

144648267
BEQUILLE1PCL-1-12N: RNCC: 3 | RNVC: 2

1 Sep 1993

5340-14-345-6222
Swivel Caster

143456222
13917: RNCC: 3 | RNVC: 9
556123-00: RNCC: 5 | RNVC: 2
556123: RNCC: 5 | RNVC: 2
85-689-2989: RNCC: 6 | RNVC: 9

5 Oct 1977

5340-14-533-0286
Access Cover

145330286
F232-32810M1: RNCC: 3 | RNVC: 2

20 Jan 2003

5340-14-539-2463
Angle Bracket

145392463
21169169-00: RNCC: 3 | RNVC: 2
21169169-8: RNCC: 5 | RNVC: 2

17 Dec 2003

5340-14-206-2837
Retaining Strap

142062837
NO PRIMARY REF14-206-2837: RNCC: 3 | RNVC: 2
18552: RNCC: 5 | RNVC: 9
18532: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-441-2884
Loop Clamp

144412884
R13-11-6: RNCC: 3 | RNVC: 2
R13-11-6: RNCC: 3 | RNVC: 2
00-200-1558: RNCC: 5 | RNVC: 2
R13-11-6: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-14-424-5553
Quick Release Pin

144245553
0311752: RNCC: 3 | RNVC: 2
3296-10: RNCC: 5 | RNVC: 2

27 May 1988

5340-14-353-6815
Retaining Strap

143536815
650-403-249-0: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-537-3462
Retaining Band

145373462
MAT169-0010F10/F11D13,7ET14: RNCC: 3 | RNVC: 2

21 Oct 2003

5340-14-307-1763
Synchro Clamp

143071763
2854-031: RNCC: 3 | RNVC: 2
2854-031: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-447-2804
Angle Bracket

144472804
365A87-3032-23: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-333-7399
Access Cover

143337399
2700-20-01: RNCC: 3 | RNVC: 2

23 Apr 1976

5340-14-574-3181
Utility Resilient Mount

145743181
HH11-40TM2: RNCC: 3 | RNVC: 2

8 Jan 2013

5340-14-526-0267
Mounting Bracket

145260267
1555772: RNCC: 3 | RNVC: 2
8012236Q00: RNCC: 5 | RNVC: 2
1555772: RNCC: 5 | RNVC: 2

28 Jun 2001

5340-14-456-9517
Section Block Clamp

144569517
9401ETL1M0301: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-14-482-8684
Detent Plunger

144828684
0868581T00: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-551-3394
Retaining Strap

145513394
RA1M701386171: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-536-2091
Mounting Bracket

145362091
45710821: RNCC: 3 | RNVC: 2

18 Jul 2003

5340-14-503-9827
Blank Panel

145039827
TRAPP93638A00: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-14-485-6442
Mounting Plate

144856442
46021132: RNCC: 3 | RNVC: 2
46021132: RNCC: 5 | RNVC: 2

6 Feb 1997

5340-14-406-0192
Bumper

144060192
0000691359: RNCC: 3 | RNVC: 2
E70153212: RNCC: 5 | RNVC: 2
691359: RNCC: 5 | RNVC: 2

7 Jan 1986

5340-14-500-8527
Mounting Plate

145008527
E65201130020: RNCC: 3 | RNVC: 2
F300 0T 024 8730: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-274-2604
Retaining Strap

142742604
150228: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-515-3041
Loop Clamp

145153041
0009552235: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-417-4050
Butt Hinge

144174050
253553P03: RNCC: 3 | RNVC: 2
253553P03: RNCC: 5 | RNVC: 9

8 Jul 1987

5340-14-321-9134
Mending Plate

143219134
182A8752: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-381-4717
Angle Bracket

143814717
573906489: RNCC: 3 | RNVC: 2
573906489: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-359-1152
Angle Bracket

143591152
A11A234160005: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-384-6399
Loop Clamp

143846399
16496937: RNCC: 3 | RNVC: 2

2 Jun 1983

5340-14-373-1436
Mending Plate

143731436
227632: RNCC: 3 | RNVC: 2
227632: RNCC: 5 | RNVC: 9

21 Oct 1981

5340-14-489-8174
Angle Bracket

144898174
E3560358: RNCC: 3 | RNVC: 9

21 Aug 1997

5340-14-439-6300
Loop Clamp

144396300
8150001400: RNCC: 3 | RNVC: 2
815N14: RNCC: 5 | RNVC: 2

16 May 1990

5340-14-496-9064
Bumper

144969064
20292BSM650: RNCC: 3 | RNVC: 2
F300 0T 022 2560: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-472-3241
Shelf Bracket

144723241
DHV1263: RNCC: 3 | RNVC: 2

19 Oct 1994

5340-14-468-3717
Mounting Plate

144683717
1081887L00: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-14-505-6684
Mounting Plate

145056684
E28001205000: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-353-5548
Loop Clamp

143535548
4147: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-551-5029
Angle Bracket

145515029
RA1M704751581: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-551-3528
Angle Bracket

145513528
RA1B702756131N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-449-8459
Mounting Bracket

144498459
381019B: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-14-516-7457
Loop Clamp

145167457
5205051: RNCC: 3 | RNVC: 2
Y00005960: RNCC: 3 | RNVC: 9
Y00005960: RNCC: 5 | RNVC: 9

13 Oct 1999

5340-14-479-3519
Butt Hinge

144793519
FH01PD210107: RNCC: 3 | RNVC: 9

10 Jan 1996

5340-14-431-9776
Protection Bellows

144319776
1051310900: RNCC: 3 | RNVC: 2
91620645: RNCC: 5 | RNVC: 2
DAH1051310900: RNCC: 5 | RNVC: 9

18 May 1989

5340-14-325-1684
Mending Plate

143251684
5380901: RNCC: 3 | RNVC: 2
5380901: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-481-0343
Angle Bracket

144810343
3BM01023AAAA: RNCC: 3 | RNVC: 2
3BM01023AAAA: RNCC: 5 | RNVC: 9

18 Apr 1996

5340-14-434-4428
Loop Clamp

144344428
3-2607-02-20A: RNCC: 3 | RNVC: 2
3-2607-02-20A: RNCC: 5 | RNVC: 2

20 Sep 1989

5340-14-454-0443
Flush Catch Claw

144540443
Z36203-14: RNCC: 3 | RNVC: 2
1404023: RNCC: 5 | RNVC: 2

19 Mar 1992

5340-14-542-1504
Expansion Shield

145421504
058690: RNCC: 3 | RNVC: 2
CC6/25: RNCC: 5 | RNVC: 2
SC086752: RNCC: 6 | RNVC: 9

8 Jul 2004

5340-14-357-8546
Access Cover

143578546
3511-131-24471: RNCC: 3 | RNVC: 2
3511 131 24471: RNCC: 5 | RNVC: 2

20 Jul 1979

5340-14-421-2099
Protection Bellows

144212099
XKDZ921: RNCC: 3 | RNVC: 2
XKD-Z921: RNCC: 5 | RNVC: 2
3389110643787: RNCC: 5 | RNVC: 2

6 Jan 1988

5340-14-324-0896
Retaining Strap

143240896
A0182-066F26: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-412-6176
Bumper

144126176
C3388-060F9: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-14-389-0372
Plug Button

143890372
S44-20Z: RNCC: 3 | RNVC: 2
S44-20: RNCC: 5 | RNVC: 2

29 Nov 1983

5340-14-530-5113
Bail Handle

145305113
11-106-28: RNCC: 3 | RNVC: 2
8033986K00: RNCC: 5 | RNVC: 2

18 Jun 2002

5340-14-284-7562
Angle Bracket

142847562
121A21-250-04-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-283-5180
Loop Clamp

142835180
NO PRIMARY REF14-283-5180: RNCC: 3 | RNVC: 2
17-600-33: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-320-6966
Angle Bracket

143206966
121E71-130-10-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-465-1621
Foot Bolt

144651621
365A61-6707-27: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-353-1067
Access Cover

143531067
C60-28: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-285-2185
Retaining Strap

142852185
A10-90-141-35-0: RNCC: 3 | RNVC: 2
A10-90-141-35-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-264-3230
Retaining Strap

142643230
23310-03-1050P001: RNCC: 3 | RNVC: 2
233-61-422: RNCC: 5 | RNVC: 2

21 Jun 1989

5340-14-386-5679
Access Cover

143865679
995586-100: RNCC: 3 | RNVC: 2
995586-100: RNCC: 5 | RNVC: 2
995586-100: RNCC: 5 | RNVC: 9

24 Aug 1983

5340-14-351-8586
Webbing Strap

143518586
73-042-342: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-468-4009
Rod End Clevis

144684009
442-10: RNCC: 3 | RNVC: 2
118B: RNCC: 5 | RNVC: 2
85-694-5801: RNCC: 6 | RNVC: 9

23 Feb 1994

5340-14-542-6005
Pipe Hanger

145426005
22-MO-1420-CBNDF-0: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-14-361-2531
Anchor Strap

143612531
K68281-57: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-361-7915
Synchro Clamp

143617915
C025: RNCC: 3 | RNVC: 2
30-151: RNCC: 5 | RNVC: 9
30151: RNCC: 5 | RNVC: 9
85-692-2962: RNCC: 6 | RNVC: 9

20 Feb 1980

5340-14-303-8357
Rod End Clevis

143038357
615-412-058DET16: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-466-9190
Access Cover

144669190
3526AA01-361: RNCC: 3 | RNVC: 2
3526AA01361: RNCC: 5 | RNVC: 2
3560AA00-361: RNCC: 5 | RNVC: 2
3560AA01-361: RNCC: 5 | RNVC: 2

9 Dec 1993

5340-14-377-1333
Retaining Strap

143771333
10-261-033: RNCC: 3 | RNVC: 2
10261033: RNCC: 5 | RNVC: 2

17 May 1982

5340-14-529-8416
Ladder Safety Shoe

145298416
9007/005: RNCC: 3 | RNVC: 2
SYB4946: RNCC: 5 | RNVC: 2

17 Apr 2002

5340-14-416-0478
Anchor Strap

144160478
10-082-141: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-297-1371
Pipe Hanger

142971371
MY20515-11870: RNCC: 3 | RNVC: 2
MY20-515-11-870: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-348-8970
Bumper

143488970
3001CBM102-3002: RNCC: 3 | RNVC: 2
3001CBM102-30-02: RNCC: 5 | RNVC: 2
3001CBM1023002: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-384-5392
Rigid Caster

143845392
56-100-SP: RNCC: 3 | RNVC: 2
56-100SP: RNCC: 5 | RNVC: 2

2 Jun 1983

5340-14-412-1654
Access Cover

144121654
IF018-074: RNCC: 3 | RNVC: 9
IF018074: RNCC: 5 | RNVC: 9

8 Oct 1986

5340-14-536-9862
Mounting Bracket

145369862
8050-02: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-411-6859
Bumper

144116859
NO PRIMARY REF14-411-6859: RNCC: 3 | RNVC: 2
D20-33272: RNCC: 5 | RNVC: 9

27 Aug 1986

5340-14-472-8813
Support Hook

144728813
332A57-2408-20: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-464-0076
Mounting Bracket

144640076
627008685: RNCC: 3 | RNVC: 2
6270-08685: RNCC: 5 | RNVC: 2

7 Jul 1993

5340-14-474-5717
Bow Handle

144745717
NO-PRIMARY REF14-474-5717: RNCC: 3 | RNVC: 2
45284513: RNCC: 5 | RNVC: 9
45284513: RNCC: 5 | RNVC: 9

22 Feb 1995

5340-14-478-0036
Loop Clamp

144780036
650-791-068-0: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-14-511-6459
Mounting Bracket

145116459
1-625-08-07: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-378-9379
Mounting Plate

143789379
NO PRIMARY REF14-378-9379: RNCC: 3 | RNVC: 2
53339160: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-14-531-8241
Mounting Plate

145318241
341A65-7424-00: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-310-9613
Rod End Clevis

143109613
501-702-097-0: RNCC: 3 | RNVC: 2
501-702-097: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-339-4204
Rod End Connector

143394204
M3C216-003: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-224-0213
Handwheel

142240213
GSM137-001F15DET2AVECB0ULEAS10G: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-253-4283
Mounting Bracket

142534283
321A27-0456-00: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-420-6287
Bow Handle

144206287
222-105: RNCC: 3 | RNVC: 9
4681-222-105: RNCC: 5 | RNVC: 9

16 Dec 1987

5340-14-317-5270
Rod End Clevis

143175270
321A27-9790-22: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-321-2447
Rod End Clevis

143212447
175-15-159: RNCC: 3 | RNVC: 2
175-15-159: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-464-9713
Blank Panel

144649713
365A63-1518-54: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-291-4188
Mending Plate

142914188
121E23-623-06-1: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-360-1455
Control Rod

143601455
511-408-007REP66: RNCC: 3 | RNVC: 2
511-408-001REP66: RNCC: 5 | RNVC: 2

31 Oct 1979

5340-14-318-6287
Mounting Plate

143186287
61052: RNCC: 3 | RNVC: 2
61-052: RNCC: 5 | RNVC: 9
P061052: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-329-4508
Angle Bracket

143294508
413-06182-000: RNCC: 3 | RNVC: 2
413-06182-000: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-200-8542
Retaining Strap

142008542
NO PRIMARY REF14-200-8542: RNCC: 3 | RNVC: 2
1270-4: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-14-529-1898
Mounting Bracket

145291898
341A81-1665-00: RNCC: 3 | RNVC: 2

15 Mar 2002

5340-14-465-1725
Mounting Plate

144651725
365A68-4560-04: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-212-3511
Loop Clamp

142123511
501-211-045-0: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-531-2106
Retaining Band

145312106
341A23-1077-20: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-444-8186
Snap Hook

144448186
4220-80-31: RNCC: 3 | RNVC: 2

22 Jan 1991

5340-14-549-6226
Mounting Plate

145496226
JCB 10 135-754: RNCC: 3 | RNVC: 2

24 Apr 2006

5340-14-468-3629
Angle Bracket

144683629
39527405: RNCC: 3 | RNVC: 2
39527405: RNCC: 5 | RNVC: 9

23 Feb 1994

5340-14-553-4503
Mounting Bracket

145534503
9402CMP127200: RNCC: 3 | RNVC: 2

4 Apr 2007

5340-14-368-3729
Rim Lock Set

143683729
F116181: RNCC: 3 | RNVC: 2
89254981: RNCC: 5 | RNVC: 2
F113181: RNCC: 6 | RNVC: 9
F116181: RNCC: 6 | RNVC: 9

20 Feb 1981

5340-14-512-5827
Angle Bracket

145125827
3BM02739AAAA: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-527-4025
Bumper

145274025
H77256: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-536-2612
Mounting Bracket

145362612
254154: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-14-341-6532
Anchor Strap

143416532
181684: RNCC: 3 | RNVC: 2
5171526500: RNCC: 3 | RNVC: 2
715265: RNCC: 5 | RNVC: 9

14 Apr 1977

5340-14-430-6395
Block Clamp

144306395
PM1A526239010: RNCC: 3 | RNVC: 2
PM1A526239010: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-525-5985
Access Cover

145255985
10 146 400 1370: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-530-5942
Mounting Plate

145305942
211500: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-14-525-5893
Loop Clamp

145255893
10 146 360 1230: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-399-1193
Leaf Spring

143991193
5000714684: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-334-3403
Clamping Catch

143343403
8310426: RNCC: 3 | RNVC: 2
8310426: RNCC: 5 | RNVC: 2
8310426: RNCC: 5 | RNVC: 9

23 Apr 1976

5340-14-513-0566
Webbing Strap

145130566
009581035P: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-14-411-4806
Rigid Caster

144114806
201149: RNCC: 3 | RNVC: 2
EVERESTRL200X30: RNCC: 5 | RNVC: 2

6 Aug 1986

5340-14-545-7275
Mounting Plate

145457275
4528568C: RNCC: 3 | RNVC: 2

2 May 2005

5340-14-518-1298
Mounting Plate

145181298
5000748688: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-541-5211
Mounting Bracket

145415211
1091520: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-427-5263
Loop Clamp

144275263
035355: RNCC: 3 | RNVC: 2

20 Oct 1988

5340-14-546-7327
Blank Panel

145467327
S258A4012114: RNCC: 3 | RNVC: 2

9 Aug 2005

5340-14-358-3288
Loop Clamp

143583288
61213105015: RNCC: 3 | RNVC: 2
80G15: RNCC: 5 | RNVC: 2
5000116023: RNCC: 5 | RNVC: 2
5000603226: RNCC: 5 | RNVC: 2
5000116023: RNCC: 5 | RNVC: 9
5000603226: RNCC: 5 | RNVC: 9

13 Aug 1979

5340-14-488-3566
Handwheel

144883566
P43020: RNCC: 3 | RNVC: 2

30 Apr 1997

5340-14-527-7477
Angle Bracket

145277477
707861: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-14-348-0779
Runner

143480779
457407: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-315-3014
Lock-Release Lever

143153014
156363: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-509-2556
Mounting Plate

145092556
0164777170: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-369-9434
Webbing Strap

143699434
398002140200: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-529-8570
Mounting Plate

145298570
ANGLE93834A00: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-533-2624
Bow Handle

145332624
V116514: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-416-6812
Angle Bracket

144166812
412802070005: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-481-7348
Retaining Strap

144817348
15913102: RNCC: 3 | RNVC: 2

30 May 1996

5340-14-262-3655
Loop Clamp

142623655
175-23-983: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-530-0331
Support Hook

145300331
196A824: RNCC: 3 | RNVC: 2
1960000824: RNCC: 5 | RNVC: 9

30 Apr 2002

5340-14-306-2312
Angle Bracket

143062312
5171391600: RNCC: 3 | RNVC: 2
713916: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-031-1565
Mending Plate

140311565
VDP2975: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-366-8371
Angle Bracket

143668371
A11A231472050: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-409-4096
Angle Bracket

144094096
114762002: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-512-5055
Kick Door Plate

145125055
JAQUE00386A00: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-546-2979
Mounting Bracket

145462979
10646576: RNCC: 3 | RNVC: 2

22 Jun 2005

5340-14-535-3824
Rim Lock

145353824
5010225716: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-393-5512
Tubular Fairlead

143935512
970349: RNCC: 3 | RNVC: 2
970349: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-14-375-9522
Webbing Strap

143759522
03-011: RNCC: 3 | RNVC: 2

30 Mar 1982

5340-14-451-8904
Loop Clamp

144518904
76442801200: RNCC: 3 | RNVC: 2
360295-01: RNCC: 5 | RNVC: 2
43433243: RNCC: 5 | RNVC: 2

11 Dec 1991

5340-14-536-3310
Bumper

145363310
D05/4126: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-14-340-3376
Access Cover

143403376
M3C704-90-02: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-407-1550
Loop Clamp

144071550
120-8117-100: RNCC: 3 | RNVC: 2

12 Feb 1986

5340-14-362-3782
Bumper

143623782
A224-03-33: RNCC: 3 | RNVC: 2
A224-03-33: RNCC: 3 | RNVC: 9

19 Mar 1980

5340-14-302-4660
Mending Plate

143024660
3130S23-11-051: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-536-4498
Webbing Strap

145364498
ARO9012-25: RNCC: 3 | RNVC: 2

22 Aug 2003

5340-14-499-1922
Loop Clamp

144991922
65030202: RNCC: 3 | RNVC: 2
9418920025: RNCC: 3 | RNVC: 2
203024010016A: RNCC: 3 | RNVC: 9
RSGU1-25-20W1: RNCC: 5 | RNVC: 2
F300 0T 019 7493: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-010-0529
Loop Clamp

140100529
3130S69-10-001: RNCC: 3 | RNVC: 2

1 Jan 1961

5340-14-412-5392
Bumper

144125392
332A25-1019-38: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-14-490-3745
Handwheel

144903745
NO PRIMARY REF14-490-3745: RNCC: 3 | RNVC: 2
NNP5320844553693: RNCC: 5 | RNVC: 9

24 Sep 1997

5340-14-442-0125
Mounting Plate

144420125
332P66-1521-61: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-265-1387
Loop Clamp

142651387
55219-310D507ADL: RNCC: 3 | RNVC: 2

22 Oct 1997

5340-14-430-9476
Pipe Hanger

144309476
G230075-16: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-14-532-5586
Mounting Bracket

145325586
330A62-0407-00: RNCC: 3 | RNVC: 2

13 Nov 2002

5340-14-524-5465
Angle Bracket

145245465
365A25-3049-20: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-378-4238
Retaining Band

143784238
360A94-4100-14: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-335-7738
Retaining Strap

143357738
160-888802-08: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-552-9384
Cover Strip

145529384
4K98-087: RNCC: 3 | RNVC: 2

14 Feb 2007

5340-14-490-6175
Mounting Bracket

144906175
NO-PRIMARY REF14-490-6175: RNCC: 3 | RNVC: 2
324032: RNCC: 5 | RNVC: 2
324032: RNCC: 5 | RNVC: 9
507668: RNCC: 5 | RNVC: 9
324032: RNCC: 5 | RNVC: 9

6 Oct 1997

5340-14-531-8172
Mounting Bracket

145318172
341A54-1527-20: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-517-9352
Access Cover

145179352
5002-4774: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-14-339-4925
Loop Clamp

143394925
M3E702-135: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-531-8347
Mounting Bracket

145318347
341A76-1280-04: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-541-8257
Loop Clamp

145418257
88179-1124: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-534-8811
Mounting Bracket

145348811
GF21-126-000-16: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-14-335-0543
Bridge Clamp

143350543
MAT165-004F8: RNCC: 3 | RNVC: 2
GSM165-005F10: RNCC: 5 | RNVC: 2
GSM165-05F10: RNCC: 5 | RNVC: 2

2 Jun 1976

5340-14-395-6930
Bumper

143956930
853-201-262-0: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-379-8212
Loop Clamp

143798212
51113105079: RNCC: 3 | RNVC: 2
A0021-25G79: RNCC: 5 | RNVC: 2
25G79: RNCC: 5 | RNVC: 2

20 Oct 1982

5340-14-479-4827
Synchro Clamp

144794827
350A21-1296-23: RNCC: 3 | RNVC: 2

15 Jan 1996

5340-14-437-4664
Synchro Clamp

144374664
332A91-3004-00: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-530-3608
Spring Holder

145303608
45NBN848-124: RNCC: 3 | RNVC: 2

5 Jun 2002

5340-14-477-1735
Loop Clamp

144771735
225000-18454: RNCC: 3 | RNVC: 2
F300 0T 019 6128: RNCC: 5 | RNVC: 9

26 Jul 1995

5340-14-392-8027
Snap Hook

143928027
4030T70-206: RNCC: 3 | RNVC: 2
4030AT70-16: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-14-478-6629
Shelf Bracket

144786629
744-119: RNCC: 3 | RNVC: 2

13 Nov 1995

5340-14-362-3595
Butt Hinge

143623595
NO PRIMARY REF14-362-3595: RNCC: 3 | RNVC: 2
12327-134: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-432-1490
Block Clamp

144321490
NO PRIMARY REF14-432-1490: RNCC: 3 | RNVC: 2
3511-314-96441: RNCC: 5 | RNVC: 9

24 May 1989

5340-14-526-4777
Pipe Hanger

145264777
78733-056-024A: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-448-7116
Runner

144487116
A03037-10-2010P010: RNCC: 3 | RNVC: 2

4 Jul 1991

5340-14-548-0228
Loop Clamp

145480228
457725S: RNCC: 3 | RNVC: 2

6 Dec 2005

5340-14-304-7575
Bumper

143047575
E4M235-13-823: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-504-2020
Mounting Bracket

145042020
1870240M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-549-4231
Mounting Bracket

145494231
BC201-252004-00: RNCC: 3 | RNVC: 2

3 Apr 2006

5340-14-219-0500
Handwheel

142190500
J05402-13-0100P015: RNCC: 3 | RNVC: 2
253-5M663P26C: RNCC: 3 | RNVC: 9
PA253-5M663P26C: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-523-6135
Mounting Plate

145236135
224E279-00: RNCC: 3 | RNVC: 2
224E279-00: RNCC: 5 | RNVC: 9

31 Jan 2001

5340-14-526-0410
Mounting Bracket

145260410
10593339: RNCC: 3 | RNVC: 2

28 Jun 2001

5340-14-541-1109
Mounting Bracket

145411109
1SH41743402: RNCC: 3 | RNVC: 2

14 May 2004

5340-14-539-9696
Bow Handle

145399696
RA1B701430621A1: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-329-3528
Rigid Caster

143293528
442B65GRISCLAIR: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-534-7232
Mounting Bracket

145347232
10628858: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-322-0496
Handwheel

143220496
75294: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-401-0494
Bail Handle

144010494
M4Z7101906801: RNCC: 3 | RNVC: 2

29 May 1985

5340-14-534-2915
Mounting Bracket

145342915
10677168000: RNCC: 3 | RNVC: 2

19 Mar 2003

5340-14-516-8579
Mounting Bracket

145168579
101163901450: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-14-505-7016
Angle Bracket

145057016
327038D46967: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-545-8093
Bail Handle

145458093
200200: RNCC: 3 | RNVC: 2

17 May 2005

5340-14-403-9099
Tubular Fairlead

144039099
40010857: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-315-8435
Handwheel

143158435
301MA0070REP3: RNCC: 3 | RNVC: 2
301MA070REP3: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-433-5132
Mounting Bracket

144335132
G230575: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-210-4967
Rigid Caster

142104967
57604: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-511-9119
Metal Grille

145119119
4SHX780: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-14-510-7750
Lock Bolt

145107750
703214: RNCC: 3 | RNVC: 2

12 Nov 1998

5340-14-379-4346
Angle Bracket

143794346
2206-940B527: RNCC: 3 | RNVC: 2

1 Oct 1982

5340-14-500-8225
Section Block Clamp

145008225
E64009998045: RNCC: 3 | RNVC: 2
F300 0T 024 8427: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-202-8388
Retaining Strap

142028388
0000251952: RNCC: 3 | RNVC: 2
251952: RNCC: 5 | RNVC: 9
0000251952: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-14-518-7282
Access Cover

145187282
T711A1001137: RNCC: 3 | RNVC: 2

16 Feb 2000

Load More Results