What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 43 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 43 of 446

5340-14-464-9336
Mounting Plate

144649336
9970-135-237: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-323-4603
Angle Bracket

143234603
F101-035: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-523-5010
Bow Handle

145235010
01-725-230: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-14-407-8879
Loop Clamp

144078879
SPV110PA-DPAS: RNCC: 3 | RNVC: 2

5 Mar 1986

5340-14-497-7148
Mounting Bracket

144977148
701-145100-938-0: RNCC: 3 | RNVC: 2

15 Oct 1997

5340-14-479-6889
Mounting Bracket

144796889
070SP066: RNCC: 3 | RNVC: 2
701786: RNCC: 5 | RNVC: 2
070SP066-0100: RNCC: 5 | RNVC: 2

31 Jan 1996

5340-14-257-2278
Cover Strip

142572278
330A25-2202-31: RNCC: 3 | RNVC: 2
330A25-2202-3100: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-361-7107
Retaining Strap

143617107
V07259-68: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-530-6068
Mounting Plate

145306068
888-380-203-0: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-14-339-4517
Pipe Hanger

143394517
501-486-085-0: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-468-4106
Utility Access Door

144684106
386288: RNCC: 3 | RNVC: 2
386288-001: RNCC: 5 | RNVC: 9

23 Feb 1994

5340-14-416-4134
Pipe Hanger

144164134
ST08-00-28F2-8DEXT42-4: RNCC: 3 | RNVC: 2
2155478: RNCC: 5 | RNVC: 9
ST08-00-28F2-8DEXT42-4: RNCC: 5 | RNVC: 9

10 Jun 1987

5340-14-524-8150
Retaining Strap

145248150
1072703B00: RNCC: 3 | RNVC: 2

18 Apr 2001

5340-14-298-8239
Bow Handle

142988239
ST406M77P17: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-539-6784
Mounting Bracket

145396784
10650267: RNCC: 3 | RNVC: 2

28 Jan 2004

5340-14-452-3078
Mounting Bracket

144523078
ST406M11P64: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-300-3338
Runner

143003338
15135382: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-482-0061
Mounting Plate

144820061
10311962: RNCC: 3 | RNVC: 2

13 Jun 1996

5340-14-408-1084
Permanent Magnet

144081084
AF14N0IR: RNCC: 3 | RNVC: 2
89342662: RNCC: 5 | RNVC: 2

19 Mar 1986

5340-14-508-1545
Mounting Bracket

145081545
4773820100: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-495-9957
Angle Bracket

144959957
624491: RNCC: 3 | RNVC: 2
F300 0T 020 7184: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-486-5110
Stand Base

144865110
10025441: RNCC: 3 | RNVC: 2

21 Mar 1997

5340-14-541-5049
Mounting Bracket

145415049
1091057: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-428-8471
Loop Clamp

144288471
16379500: RNCC: 3 | RNVC: 2
16379500: RNCC: 5 | RNVC: 9

22 Dec 1988

5340-14-353-0296
Bumper

143530296
A11A211104012: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-422-7885
Mounting Bracket

144227885
39228585: RNCC: 3 | RNVC: 2
39228585: RNCC: 5 | RNVC: 9

17 Mar 1988

5340-14-547-9664
Mounting Bracket

145479664
RA1M701216111: RNCC: 3 | RNVC: 2

30 Nov 2005

5340-14-403-3983
Snap Hook

144033983
006062050P: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-482-0808
Loop Holder

144820808
92PD120301: RNCC: 3 | RNVC: 2

20 Jun 1996

5340-14-520-9845
Threaded Rod End

145209845
245425: RNCC: 3 | RNVC: 2

28 Jun 2000

5340-14-532-5619
Loop Clamp

145325619
414451: RNCC: 3 | RNVC: 2
Z59813308PL5REP18: RNCC: 5 | RNVC: 2

14 Nov 2002

5340-14-532-1362
Mounting Plate

145321362
5010559924: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-14-532-1004
Mounting Bracket

145321004
1SH41767229: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-515-3820
Bow Handle

145153820
17600: RNCC: 3 | RNVC: 9
10017600: RNCC: 5 | RNVC: 9

13 Jul 1999

5340-14-538-9485
Rim Latch

145389485
NGM0051829126173: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-533-4576
Angle Bracket

145334576
19-90379: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-536-6806
Mounting Bracket

145366806
47085294: RNCC: 3 | RNVC: 2

10 Sep 2003

5340-14-418-0520
Webbing Strap

144180520
4136K22: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-500-9811
Mounting Bracket

145009811
B69998000000: RNCC: 3 | RNVC: 2
F300 0T 025 0024: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-291-7765
Mounting Plate

142917765
594AB2: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-528-5210
Cover Strip

145285210
SZ06.250.642: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-464-6452
Mounting Plate

144646452
034079W: RNCC: 3 | RNVC: 2

18 Aug 1993

5340-14-500-3682
Mounting Bracket

145003682
E61601100002: RNCC: 3 | RNVC: 2
F300 0T 024 3782: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-551-2878
Pipe Hanger

145512878
RA1B701666361: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-515-2837
Angle Bracket

145152837
0420 3550: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-455-7775
Blank Panel

144557775
0000788478: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-447-3428
Blank Panel

144473428
76060: RNCC: 3 | RNVC: 2
89280621: RNCC: 5 | RNVC: 2

15 May 1991

5340-14-537-8319
Mounting Bracket

145378319
S622A2033201: RNCC: 3 | RNVC: 2
N622A2033201: RNCC: 5 | RNVC: 9

27 Nov 2003

5340-14-549-9376
Pawl Fastener

145499376
81103727: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-409-0309
Rod End Clevis

144090309
232723: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-380-4662
Anchor Strap

143804662
535727: RNCC: 3 | RNVC: 2
00535727: RNCC: 5 | RNVC: 2

29 Nov 1982

5340-14-535-4470
Access Cover

145354470
61182794AA: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-330-9102
Retaining Strap

143309102
413-06908-000: RNCC: 3 | RNVC: 2
413-06908-000: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-529-7941
Mounting Plate

145297941
S4710X0009-2261: RNCC: 3 | RNVC: 2

10 Apr 2002

5340-14-415-4826
Rod End Clevis

144154826
R12608A6AEL: RNCC: 2 | RNVC: 2

18 May 1987

5340-14-533-5400
Mounting Bracket

145335400
192E517-00: RNCC: 3 | RNVC: 2

10 Feb 2003

5340-14-409-0919
Access Cover

144090919
4771602150: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-043-1584
Angle Bracket

140431584
20627024: RNCC: 3 | RNVC: 2

10 Apr 1984

5340-14-310-2383
Loop Clamp

143102383
GSM1595C0LLIER2TIGE20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-302-8999
Tubular Fairlead

143028999
773-418-206FF6: RNCC: 3 | RNVC: 2
773-418-206FF6: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-514-6891
Retaining Bail

145146891
234E: RNCC: 3 | RNVC: 9
234E: RNCC: 5 | RNVC: 2
Z274000/AC: RNCC: 5 | RNVC: 2

9 Jun 1999

5340-14-376-5345
Anchor Strap

143765345
NO PRIMARY REF14-376-5345: RNCC: 3 | RNVC: 2
404305911: RNCC: 5 | RNVC: 2
404305911: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-338-8656
Expansion Plug

143388656
520196: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-230-7290
Handwheel

142307290
GSM137-001F7-8N1: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-297-7351
Handle Grip

142977351
GSM175-012F76ETF80: RNCC: 3 | RNVC: 2
GSM175-012F76,77,80,81: RNCC: 5 | RNVC: 2
GSM1931F10REP5: RNCC: 5 | RNVC: 2
GSM1931FF10DET5: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-235-1149
Expansion Plug

142351149
NO PRIMARY REF14-235-1149: RNCC: 3 | RNVC: 2
3585: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-509-0302
Mounting Plate

145090302
0205757180: RNCC: 3 | RNVC: 2

14 Oct 1998

5340-14-541-4641
Cane Bolt

145414641
1SH41771329: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-549-2637
Mounting Bracket

145492637
FARD5 004 06 P 5548A01: RNCC: 3 | RNVC: 2

16 Mar 2006

5340-14-352-1253
Rod End Connector

143521253
A11A722214431A1: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-376-3304
Retaining Strap

143763304
2-24029: RNCC: 3 | RNVC: 2

30 Mar 1982

5340-14-371-9105
Loop Clamp

143719105
5012361149: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-483-5934
Protection Bellows

144835934
1X1932AS223/2: RNCC: 3 | RNVC: 2

19 Sep 1996

5340-14-390-2917
Swivel Caster

143902917
66-25-22: RNCC: 3 | RNVC: 2
85-692-5218: RNCC: 6 | RNVC: 9

26 Jan 1984

5340-14-409-0752
Anchor Strap

144090752
4771621170: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-295-0964
Rod End Clevis

142950964
273277: RNCC: 3 | RNVC: 2
273277: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-304-2112
Access Cover

143042112
163583: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-208-5426
Access Cover

142085426
0604308100: RNCC: 3 | RNVC: 2
0604308100: RNCC: 3 | RNVC: 2
6043081: RNCC: 5 | RNVC: 2
0604308100: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-447-1576
Buckle

144471576
34209-165-025: RNCC: 3 | RNVC: 2

3 May 1991

5340-14-387-5674
Loop Clamp

143875674
PPN150SP-DP428AS: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-14-317-9286
Mending Plate

143179286
341A25-1070-40: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-368-5472
Quick Release Pin

143685472
51453C8R70N: RNCC: 3 | RNVC: 2
51453C8R70N: RNCC: 5 | RNVC: 2
51453C8R70N: RNCC: 5 | RNVC: 9
85-689-8043: RNCC: 6 | RNVC: 9

20 Feb 1981

5340-14-470-5469
Loop Clamp

144705469
EA5M707-087: RNCC: 3 | RNVC: 2

22 Jun 1994

5340-14-319-2994
Angle Bracket

143192994
HE645-3542: RNCC: 3 | RNVC: 2
476322PPC38: RNCC: 5 | RNVC: 1

1 Jan 1975

5340-14-514-4757
Shelf Bracket

145144757
45218695: RNCC: 3 | RNVC: 2
45218695: RNCC: 5 | RNVC: 2
IF-192-1082: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-416-1601
Mounting Plate

144161601
M330-10035: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-260-0685
Mounting Bracket

142600685
321A59-0124-21: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-338-2112
Loop Clamp

143382112
51113105078: RNCC: 3 | RNVC: 2
25G78: RNCC: 5 | RNVC: 2
85-688-6576: RNCC: 6 | RNVC: 9

6 Nov 1976

5340-14-333-7234
Doorknob

143337234
9101-22: RNCC: 3 | RNVC: 2

23 Apr 1976

5340-14-413-7639
Loop Clamp

144137639
A0021-21FE18: RNCC: 3 | RNVC: 2

15 Jan 1987

5340-14-389-4285
Loop Clamp

143894285
360A55-1029-20: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-395-1999
Swivel Caster

143951999
557311: RNCC: 3 | RNVC: 2
AR557311: RNCC: 5 | RNVC: 2
85-692-6215: RNCC: 6 | RNVC: 9

2 Oct 1984

5340-14-353-6090
Buckle

143536090
34209-168-025: RNCC: 3 | RNVC: 2
356002110302: RNCC: 5 | RNVC: 2

16 Jan 1979

5340-14-466-6326
Mortise Lock Set

144666326
9136-80: RNCC: 3 | RNVC: 2
9255536880: RNCC: 5 | RNVC: 2

17 Nov 1993

5340-14-473-0313
Mounting Bracket

144730313
S32-702: RNCC: 3 | RNVC: 2
S32-702: RNCC: 5 | RNVC: 9

6 Dec 1994

5340-14-545-7496
Lock-Release Lever

145457496
RQM-50501: RNCC: 3 | RNVC: 2
SYQ5470: RNCC: 5 | RNVC: 2
RQM-50501: RNCC: 5 | RNVC: 2

9 May 2005

5340-14-415-6475
Lock Bolt

144156475
350A25-1350-1901: RNCC: 3 | RNVC: 2

18 May 1987

5340-14-459-6672
Arched Cushion

144596672
MAT169-0012F19DE37: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-349-3142
Detent Plunger

143493142
T20-13C131: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-370-2695
Cover Strip

143702695
330A22-2310-154: RNCC: 3 | RNVC: 2
330A-22.2310 154: RNCC: 5 | RNVC: 2

18 May 1981

5340-14-242-0052
Mending Plate

142420052
NO PRIMARY REF14-242-0052: RNCC: 3 | RNVC: 2
36491: RNCC: 5 | RNVC: 9
062066556: RNCC: 5 | RNVC: 9
66556: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-345-7808
Mending Plate

143457808
341A21-1104-54: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-442-3343
Stand Base

144423343
332P63-1200-61: RNCC: 3 | RNVC: 2

10 Oct 1990

5340-14-435-8073
Mounting Plate

144358073
16315935: RNCC: 1 | RNVC: 2
419-12: RNCC: 3 | RNVC: 2
16315935: RNCC: 5 | RNVC: 9

22 Nov 1989

5340-14-486-2099
Loop Clamp

144862099
64811-3: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-467-5171
Key Holder

144675171
CEPK332800003F32REP1: RNCC: 3 | RNVC: 2
CEPK332800003F32-20CLEFS: RNCC: 5 | RNVC: 2
EA00040: RNCC: 5 | RNVC: 2

14 Jan 1994

5340-14-396-3945
Webbing Strap

143963945
IF032-505: RNCC: 3 | RNVC: 9

27 Nov 1984

5340-14-509-2711
Access Cover

145092711
0164777060: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-355-0311
Access Cover

143550311
53MA202409: RNCC: 3 | RNVC: 2
53MA202502: RNCC: 3 | RNVC: 2
53MA202409A: RNCC: 5 | RNVC: 2

20 Feb 1979

5340-14-281-9590
Loop Clamp

142819590
502730: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-370-5972
Angle Bracket

143705972
A11A234160003: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-351-5353
Loop Clamp

143515353
B6142: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-386-5078
Access Cover

143865078
051601: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-545-1127
Access Cover

145451127
TS142984Y00: RNCC: 3 | RNVC: 2

18 Mar 2005

5340-14-444-0078
Access Cover

144440078
45103139: RNCC: 3 | RNVC: 2

18 Dec 1990

5340-14-392-8597
Access Cover

143928597
225195: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-554-9258
Retaining Bail

145549258
14100007192: RNCC: 3 | RNVC: 2

10 Sep 2007

5340-14-452-3627
Rod End Clevis

144523627
37185: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-441-9185
Mounting Bracket

144419185
E05801200: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-553-2736
Access Cover

145532736
LA8P00100H1110A: RNCC: 3 | RNVC: 2
LA8P00100H1110A: RNCC: 5 | RNVC: 2

20 Mar 2007

5340-14-384-4748
Control Rod

143844748
850.895.101: RNCC: 3 | RNVC: 2
E46120R15REP12: RNCC: 5 | RNVC: 9

4 May 1983

5340-14-446-2712
Mounting Bracket

144462712
099546C: RNCC: 3 | RNVC: 2

11 Mar 1991

5340-14-379-4262
Access Door Hinge

143794262
BAZ4369: RNCC: 3 | RNVC: 2

1 Oct 1982

5340-14-414-1972
Plug Button

144141972
158200: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-521-1549
Access Cover

145211549
F1263608: RNCC: 3 | RNVC: 2
F1263608: RNCC: 5 | RNVC: 2

12 Jul 2000

5340-14-383-4897
Rod End Clevis

143834897
16762565: RNCC: 3 | RNVC: 2
16762565: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-527-1967
Access Cover

145271967
MB4764F00: RNCC: 3 | RNVC: 2

10 Oct 2001

5340-14-517-0045
Bumper

145170045
RA1M703880171: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-520-4555
Mounting Plate

145204555
476316: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-551-3508
Angle Bracket

145513508
RA1A701376217N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-462-7365
Synchro Clamp

144627365
PM1A728315001: RNCC: 3 | RNVC: 2
PM1A728315001: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-532-2781
Access Cover

145322781
39371715: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-14-520-1679
Access Cover

145201679
20857887: RNCC: 3 | RNVC: 2
20857887: RNCC: 3 | RNVC: 9

17 May 2000

5340-14-338-8089
Angle Bracket

143388089
188003: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-352-6636
Access Cover

143526636
BY148A10156: RNCC: 3 | RNVC: 2
BFC10156: RNCC: 5 | RNVC: 2

14 Nov 1978

5340-14-470-6416
Mounting Plate

144706416
M4ZS460D8099: RNCC: 3 | RNVC: 2

29 Jun 1994

5340-14-434-2915
Anchor Strap

144342915
562119: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-544-9677
Mounting Plate

145449677
61395325AA: RNCC: 3 | RNVC: 2

8 Mar 2005

5340-14-413-8603
Access Cover

144138603
174811: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-351-2273
Synchro Clamp

143512273
24C7800: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-555-6632
Plug Button

145556632
0174070490: RNCC: 3 | RNVC: 2

5 Dec 2007

5340-14-439-1892
Access Cover

144391892
16766253: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-321-9415
Control Rod

143219415
K71BA351001: RNCC: 3 | RNVC: 9
82587: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-462-5422
Rim Lock Set

144625422
806815348: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-14-509-2345
Angle Bracket

145092345
MECZ6109: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-514-9359
Angle Bracket

145149359
RA1M701972141: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-14-446-2699
Bumper

144462699
095305S: RNCC: 3 | RNVC: 2

11 Mar 1991

5340-14-549-8678
Angle Bracket

145498678
2092550: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-324-7205
Access Cover

143247205
GSM1482DET19: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-401-0740
Angle Bracket

144010740
0000136123: RNCC: 3 | RNVC: 2

29 May 1985

5340-14-419-0482
Access Cover

144190482
413002050103: RNCC: 3 | RNVC: 2

30 Sep 1987

5340-14-527-0633
Mounting Plate

145270633
0315737180: RNCC: 3 | RNVC: 2

28 Sep 2001

5340-14-524-1977
Access Cover

145241977
10562795: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-244-4752
Access Cover

142444752
357823: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-533-4680
Access Cover

145334680
55-702-817: RNCC: 3 | RNVC: 2
SZ55.702.817: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-443-9895
Access Cover

144439895
1501260: RNCC: 3 | RNVC: 2

18 Dec 1990

5340-14-426-4153
Anchor Strap

144264153
U40C034056030: RNCC: 3 | RNVC: 2
U40C034056030: RNCC: 5 | RNVC: 2
0C03405603: RNCC: 5 | RNVC: 2

30 Aug 1988

5340-14-396-5901
Access Cover

143965901
6058074: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-516-3940
Mounting Bracket

145163940
HV0074001: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-428-1191
Synchro Clamp

144281191
000300000200: RNCC: 3 | RNVC: 2

1 Dec 1988

5340-14-505-6246
Access Cover

145056246
D22501300000: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-362-4766
Access Cover

143624766
5000496192: RNCC: 3 | RNVC: 2
5000496192: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-481-5574
Access Cover

144815574
8930012021: RNCC: 3 | RNVC: 2

16 May 1996

5340-14-443-5558
Angle Bracket

144435558
CAP230-70-11-05A: RNCC: 3 | RNVC: 9

28 Nov 1990

5340-14-459-7324
Loop Holder

144597324
LN321022REP6BLAG3-L32X32X3: RNCC: 3 | RNVC: 2
RAB0189: RNCC: 5 | RNVC: 2

15 Dec 1992

5340-14-465-3333
Bridge Clamp

144653333
A2-29682: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-475-5071
Mounting Bracket

144755071
TB1030101F028: RNCC: 3 | RNVC: 2
TB1030101-00SPF028: RNCC: 5 | RNVC: 2
08-60-0053: RNCC: 5 | RNVC: 9

12 Apr 1995

5340-14-293-9319
Pipe Hanger

142939319
53983-3: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-361-1003
Rim Latch Set

143611003
4144318: RNCC: 3 | RNVC: 2
44318: RNCC: 5 | RNVC: 2

19 Dec 1979

5340-14-430-5069
Butt Hinge

144305069
PM1A125710041: RNCC: 3 | RNVC: 2
PM1A125710041: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-462-8587
Mounting Plate

144628587
C24799: RNCC: 3 | RNVC: 2
85-693-8820: RNCC: 6 | RNVC: 9

5 May 1993

5340-14-466-3113
Butt Hinge

144663113
JVBT231-02-05: RNCC: 3 | RNVC: 2
00123613H: RNCC: 5 | RNVC: 2

3 Nov 1993

5340-14-501-0049
Mounting Bracket

145010049
10281025: RNCC: 3 | RNVC: 2
F300 0T 025 0342: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-452-7696
Clamping Catch

144527696
A450-054: RNCC: 3 | RNVC: 2

15 Jan 1992

5340-14-350-5649
Angle Bracket

143505649
C63004-11: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-533-5382
Mounting Bracket

145335382
192E349-00: RNCC: 3 | RNVC: 2

10 Feb 2003

5340-14-489-3944
Angle Bracket

144893944
M20H515012007B1: RNCC: 3 | RNVC: 2

16 Jul 1997

5340-14-446-3254
Loop Clamp

144463254
5000543897: RNCC: 3 | RNVC: 2

13 Mar 1991

5340-14-554-6182
Runner

145546182
21226910-00: RNCC: 3 | RNVC: 2
212269101: RNCC: 5 | RNVC: 2

25 Jul 2007

5340-14-485-3655
Mounting Bracket

144853655
NO PRIMARY REF14-485-3655: RNCC: 3 | RNVC: 2
RAB9732: RNCC: 5 | RNVC: 2
10030: RNCC: 5 | RNVC: 9

20 Jan 1997

5340-14-544-9672
Loop Clamp

145449672
18000192: RNCC: 3 | RNVC: 2
5340-GT-0000050: RNCC: 5 | RNVC: 9

8 Mar 2005

5340-14-031-1175
Mounting Plate

140311175
7232890008: RNCC: 3 | RNVC: 2
951015: RNCC: 5 | RNVC: 2
4614947154: RNCC: 5 | RNVC: 2
4614947154: RNCC: 5 | RNVC: 2
72328900: RNCC: 5 | RNVC: 2
5000559141: RNCC: 5 | RNVC: 2
5000559141: RNCC: 5 | RNVC: 9

14 Jun 1980

5340-14-449-1627
Angle Bracket

144491627
M085-203-203A: RNCC: 3 | RNVC: 2

31 Jul 1991

5340-14-473-1939
Mounting Bracket

144731939
F7987 4033-91: RNCC: 3 | RNVC: 9

7 Dec 1994

5340-14-512-7560
Mounting Bracket

145127560
800040774: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-506-2190
Angle Bracket

145062190
38222438: RNCC: 3 | RNVC: 2
38222438: RNCC: 5 | RNVC: 9

15 Apr 1998

5340-14-516-2138
Retaining Band

145162138
0020178: RNCC: 3 | RNVC: 2

15 Sep 1999

5340-14-451-2497
Pipe Hanger

144512497
PM1A726164220: RNCC: 3 | RNVC: 2
PM1A726164220: RNCC: 5 | RNVC: 2

6 Nov 1991

5340-14-551-4514
Snap Hook

145514514
29738: RNCC: 3 | RNVC: 2

22 Sep 2006

5340-14-473-4891
Access Cover

144734891
45610466: RNCC: 3 | RNVC: 2

31 Dec 1994

5340-14-448-4740
Anchor Strap

144484740
5000921410: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-14-549-7656
Mounting Bracket

145497656
S521A2051207: RNCC: 3 | RNVC: 2

10 May 2006

5340-14-529-1303
Loop Clamp

145291303
3099585: RNCC: 3 | RNVC: 2
3099585: RNCC: 5 | RNVC: 2

13 Mar 2002

5340-14-351-5842
Access Cover

143515842
113292: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-397-8550
Webbing Strap

143978550
65230: RNCC: 3 | RNVC: 9
20065230: RNCC: 5 | RNVC: 9

31 Jan 1985

5340-14-442-7492
Plate Spacer

144427492
PM1A602304002: RNCC: 3 | RNVC: 2
PM1A602304002: RNCC: 5 | RNVC: 2

31 Oct 1990

5340-14-482-6736
Access Cover

144826736
45572109: RNCC: 3 | RNVC: 2

18 Jul 1996

5340-14-521-7219
Runner

145217219
21127198: RNCC: 3 | RNVC: 2
91798513: RNCC: 5 | RNVC: 2

11 Sep 2000

5340-14-403-9303
Access Cover

144039303
33489: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-402-0729
Anchor Strap

144020729
222279: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-549-3390
Cushioning Pad

145493390
405500: RNCC: 3 | RNVC: 2

23 Mar 2006

5340-14-501-6478
Mounting Plate

145016478
45278112: RNCC: 3 | RNVC: 2
45278112: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-449-6317
Dashpot Piston

144496317
867036621: RNCC: 3 | RNVC: 2

28 Aug 1991

5340-14-394-9472
Mending Plate

143949472
20320447: RNCC: 3 | RNVC: 2
20320447: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-502-8198
Retaining Clip

145028198
9R1780: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-514-4384
Angle Bracket

145144384
009763041P: RNCC: 3 | RNVC: 2

25 May 1999

5340-14-433-3887
Angle Bracket

144333887
412703050008: RNCC: 3 | RNVC: 2

24 Jul 1989

5340-14-509-1180
Loop Clamp

145091180
052466: RNCC: 3 | RNVC: 2
052466: RNCC: 3 | RNVC: 9
427906: RNCC: 5 | RNVC: 2
19203719: RNCC: 5 | RNVC: 9

21 Oct 1998

5340-14-425-9103
Angle Bracket

144259103
BFP00524: RNCC: 3 | RNVC: 2

28 Jul 1988

5340-14-405-5802
Tubular Fairlead

144055802
M4DW2301720201: RNCC: 3 | RNVC: 2
M4EDW2001700201: RNCC: 5 | RNVC: 2

4 Dec 1985

5340-14-343-1584
Mending Plate

143431584
4770010960: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-449-6359
Key Blank

144496359
GDI78: RNCC: 3 | RNVC: 9
GDI78: RNCC: 5 | RNVC: 2
45080: RNCC: 5 | RNVC: 2
F300 0T 002 8698: RNCC: 6 | RNVC: 9

28 Aug 1991

5340-14-455-6906
Protection Bellows

144556906
5642: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-533-1366
Access Cover

145331366
10603531: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-14-539-9956
Angle Bracket

145399956
RA1A701566521N1: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-541-2280
Mounting Bracket

145412280
10647391: RNCC: 3 | RNVC: 2

19 May 2004

5340-14-544-9864
Access Cover

145449864
H320121: RNCC: 3 | RNVC: 2

10 Mar 2005

5340-14-350-4548
Anchor Strap

143504548
207759: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-361-6920
Anchor Strap

143616920
5000130782: RNCC: 3 | RNVC: 2
5000130782: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-14-474-6774
Access Cover

144746774
44029894: RNCC: 3 | RNVC: 2
44029894: RNCC: 5 | RNVC: 9

22 Feb 1995

5340-14-503-0737
Mounting Bracket

145030737
46245242: RNCC: 3 | RNVC: 2
46245242: RNCC: 5 | RNVC: 9

7 Jan 1998

5340-14-361-1172
Access Cover

143611172
7701459435: RNCC: 3 | RNVC: 2
825078: RNCC: 5 | RNVC: 2
0825078: RNCC: 5 | RNVC: 2

19 Dec 1979

5340-14-507-0945
Access Cover

145070945
8009566C00: RNCC: 3 | RNVC: 2

10 Jun 1998

5340-14-527-2724
Mounting Bracket

145272724
19218800: RNCC: 3 | RNVC: 2

17 Oct 2001

5340-14-414-7431
Retaining Strap

144147431
253233: RNCC: 3 | RNVC: 2
253233: RNCC: 5 | RNVC: 9

26 Feb 1987

5340-14-040-0210
Rod End Clevis

140400210
0249970100: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-259-5716
Mending Plate

142595716
9136161: RNCC: 3 | RNVC: 2
9136161: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-542-3486
Mounting Bracket

145423486
10665141000: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-14-545-9915
Retaining Clip

145459915
19209561: RNCC: 3 | RNVC: 2

2 Jun 2005

5340-14-512-0011
Mounting Plate

145120011
0054420: RNCC: 3 | RNVC: 2
93160254: RNCC: 3 | RNVC: 9

2 Feb 1999

5340-14-493-1645
Access Cover

144931645
013039: RNCC: 3 | RNVC: 2
F300 0T 010 9049: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-326-4312
Bumper

143264312
573895182: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-404-3843
Bumper

144043843
ST406M75P249: RNCC: 3 | RNVC: 2
BJQM75P249: RNCC: 5 | RNVC: 2

30 Oct 1985

5340-14-503-0761
Mounting Bracket

145030761
46246694: RNCC: 3 | RNVC: 2
46246694: RNCC: 5 | RNVC: 9

7 Jan 1998

5340-14-439-3369
Rod End Clevis

144393369
37162: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-517-5436
Mounting Bracket

145175436
206917: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-313-7054
Mounting Bracket

143137054
0064767270: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-480-8099
Angle Bracket

144808099
009054080P: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-14-433-2634
Mounting Bracket

144332634
5000920149: RNCC: 3 | RNVC: 2

18 Jul 1989

5340-14-536-7341
Utility Access Door

145367341
GZ4188Y01: RNCC: 3 | RNVC: 2

15 Sep 2003

5340-14-351-0434
Mending Plate

143510434
7870: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-513-7718
Access Cover

145137718
1352-223B382: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-385-8808
Anchor Strap

143858808
54388: RNCC: 3 | RNVC: 9

24 Aug 1983

5340-14-476-6651
Mounting Bracket

144766651
IVF05-14-00A: RNCC: 3 | RNVC: 2
1VF05-14-00/A: RNCC: 5 | RNVC: 2

28 Jun 1995

5340-14-516-6628
Retaining Bail

145166628
COFFRALU 300/ STE COFFRALU-FAEH4: RNCC: 3 | RNVC: 2

11 Oct 1999

5340-14-257-0924
Rod End Clevis

142570924
330A27-4233-20: RNCC: 3 | RNVC: 2
330A27-4233-2000: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-250-3149
Rod End Clevis

142503149
153196: RNCC: 3 | RNVC: 2
20-0353: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-328-7123
Control Rod

143287123
PAA55-02-009: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-290-2324
Pipe Hanger

142902324
330A75-1951-00: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-032-4076
Control Rod

140324076
6712A1F6-20B: RNCC: 3 | RNVC: 9

7 Apr 1984

5340-14-457-4439
Loop Clamp

144574439
NO PRIMARY REF14-457-4439: RNCC: 3 | RNVC: 2
S269431: RNCC: 5 | RNVC: 9

3 Sep 1992

5340-14-545-0447
Loop Clamp

145450447
23825246-00: RNCC: 3 | RNVC: 2
23825246-4: RNCC: 5 | RNVC: 2

16 Mar 2005

5340-14-351-8591
Webbing Strap

143518591
73-042-348: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-413-1528
Mounting Plate

144131528
23116207-6: RNCC: 3 | RNVC: 2
23116207: RNCC: 5 | RNVC: 2

26 Nov 1986

5340-14-299-1503
Loop Clamp

142991503
121E63-121-03-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-519-8360
Cover Strip

145198360
341A25-1070-3301: RNCC: 3 | RNVC: 2

12 Apr 2000

5340-14-515-5141
Vent Plug

145155141
6800072: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-441-2204
Mounting Plate

144412204
6801V32-2156-20: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-409-6699
Retaining Strap

144096699
R4P708-505: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-398-1425
Corner Brace

143981425
355A52-3008-22: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-485-3661
Mounting Bracket

144853661
NO PRIMARY REF14-485-3661: RNCC: 3 | RNVC: 2
RAB9738: RNCC: 5 | RNVC: 2
103115: RNCC: 5 | RNVC: 9

20 Jan 1997

5340-14-401-5279
Bumper

144015279
6814-26423: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-368-3065
Anchor Strap

143683065
F14261-66: RNCC: 3 | RNVC: 2
2131303: RNCC: 5 | RNVC: 2
2131303: RNCC: 5 | RNVC: 2

20 Feb 1981

5340-14-472-8624
Butt Hinge

144728624
332A08-0605-24: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-503-2812
Support Hook

145032812
332P87-0025-65: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-510-1096
Access Cover

145101096
F284-60-04RS1: RNCC: 3 | RNVC: 2
1560AA8007438: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-500-6076
Access Cover

145006076
0248-98: RNCC: 3 | RNVC: 2
0009683: RNCC: 3 | RNVC: 2
9351021180: RNCC: 5 | RNVC: 2
0014906: RNCC: 5 | RNVC: 2
F300 0T 024 6260: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-435-8141
Angle Bracket

144358141
332A21-1500-85: RNCC: 3 | RNVC: 2

22 Nov 1989

5340-14-465-1706
Blank Panel

144651706
365A61-8576-20: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-338-5574
Retaining Band

143385574
2704-10-04: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-384-9379
Rod End Clevis

143849379
121-528-12-09-01: RNCC: 3 | RNVC: 2
85-801-0343: RNCC: 6 | RNVC: 9

2 Jun 1983

5340-14-353-6795
Loop Clamp

143536795
650-403-202-0: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-202-1634
Loop Clamp

142021634
3130S73-69-210: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-527-0496
Loop Clamp

145270496
620-858-557-0: RNCC: 3 | RNVC: 2

26 Sep 2001

5340-14-529-5666
Mounting Plate

145295666
330A76-3182-20: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-501-1517
Mounting Bracket

145011517
014-011-105: RNCC: 3 | RNVC: 2
014.011.105: RNCC: 3 | RNVC: 2
F300 0T 025 1919: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-438-4587
Sliding Door Track

144384587
332A22-1430-45: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-340-3442
Retaining Strap

143403442
M3C707-62-02: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-326-0027
Strap Fastener Loop

143260027
55062A: RNCC: 3 | RNVC: 2
85-686-8530: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-493-6462
Mounting Bracket

144936462
J05085-02-0210P027: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-455-8145
Retaining Strap

144558145
NO PRIMARY REF14-455-8145: RNCC: 3 | RNVC: 2
20-00-946: RNCC: 5 | RNVC: 9

11 Jun 1992

5340-14-271-0119
Loop Clamp

142710119
3160S52-10-080: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-541-3657
Loop Clamp

145413657
21237856-00: RNCC: 3 | RNVC: 2

3 Jun 2004

5340-14-439-7092
Loop Clamp

144397092
6228-03036: RNCC: 3 | RNVC: 2
537035: RNCC: 5 | RNVC: 2

16 May 1990

5340-14-456-1941
Retaining Bail

144561941
MAT162-0053F1: RNCC: 3 | RNVC: 2

18 Jun 1992

5340-14-513-2511
Bumper

145132511
8703BRA100-11-00: RNCC: 3 | RNVC: 2
8703BRA100-11-00: RNCC: 3 | RNVC: 2
8703BRA100-11-00: RNCC: 3 | RNVC: 9

10 Mar 1999

5340-14-397-9670
Mounting Plate

143979670
574025278: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-457-9420
Mounting Plate

144579420
399-005-071-0: RNCC: 3 | RNVC: 2

2 Oct 1992

5340-14-339-4502
Pipe Hanger

143394502
501-486-016-0: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-531-2301
Mounting Bracket

145312301
341A76-1297-00: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-485-0647
Mounting Bracket

144850647
332A31-2111-00: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-14-474-6928
Split Tubular Clip

144746928
NO PRIMARY REF14-474-6928: RNCC: 3 | RNVC: 2
CLIPS PLASTIFIE INOXAISI301: RNCC: 5 | RNVC: 9

24 Feb 1995

5340-14-483-8992
Mounting Bracket

144838992
RPL522-420-410: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-14-407-2387
Angle Bracket

144072387
9760-407: RNCC: 3 | RNVC: 9
89409517: RNCC: 5 | RNVC: 2

12 Feb 1986

5340-14-410-6937
Mending Plate

144106937
5172026400: RNCC: 3 | RNVC: 2
720264: RNCC: 5 | RNVC: 9

9 Jul 1986

5340-14-546-8603
Mounting Bracket

145468603
S713A1016319: RNCC: 3 | RNVC: 2

30 Aug 2005

5340-14-512-7357
Retaining Strap

145127357
800033745: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-217-3371
Loop Clamp

142173371
3160S73-45-330: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-510-3367
Angle Bracket

145103367
CAP10-10-17-02: RNCC: 3 | RNVC: 9
5340AA8020933: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-493-6459
Mounting Plate

144936459
J05085-02-0210P024: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-526-3737
Lock Bolt

145263737
AZ28-1SB LEVIER 10: RNCC: 3 | RNVC: 2
AZ28-1SBLEVIER10: RNCC: 5 | RNVC: 2

25 Jul 2001

5340-14-438-6222
Bumper

144386222
332A24-0539-20: RNCC: 3 | RNVC: 2
F300 0T 010 2334: RNCC: 5 | RNVC: 9

28 Mar 1990

5340-14-335-1888
Bow Handle

143351888
NO PRIMARY REF14-335-1888: RNCC: 3 | RNVC: 2
6A: RNCC: 5 | RNVC: 9

30 Jun 1976

5340-14-532-5048
Utility Access Door

145325048
42-425-035G: RNCC: 3 | RNVC: 2
SZ42.425.035G: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-14-335-7627
Retaining Strap

143357627
160-70713-03: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-460-1754
Threaded Rod End

144601754
312-12813-001: RNCC: 3 | RNVC: 2

13 Jan 1993

5340-14-457-2502
Pipe Hanger

144572502
402217A-SG10137-Z2CND17-12: RNCC: 3 | RNVC: 2

20 Aug 1992

5340-14-401-3405
Mounting Plate

144013405
2016-61-07: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-486-0532
Lock Bolt

144860532
350A25-1520-00: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-236-9943
Rod End Clevis

142369943
NO PRIMARY REF14-236-9943: RNCC: 3 | RNVC: 2
TID20775: RNCC: 5 | RNVC: 2
75496: RNCC: 5 | RNVC: 9
39522A: RNCC: 5 | RNVC: 9
062075496: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-541-0143
Access Cover

145410143
3511 135 75263: RNCC: 3 | RNVC: 2
3511-135-75263: RNCC: 5 | RNVC: 2

5 May 2004

5340-14-553-5549
Mounting Bracket

145535549
3730B85-21: RNCC: 3 | RNVC: 2

16 Apr 2007

5340-14-521-5702
Mounting Plate

145215702
160-888315-07: RNCC: 3 | RNVC: 2

23 Aug 2000

5340-14-206-0003
Angle Bracket

142060003
2228-53-53-31-13: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-546-4509
Cover Strip

145464509
275599678-01: RNCC: 3 | RNVC: 2

6 Jul 2005

5340-14-460-6981
Mounting Bracket

144606981
7804-77: RNCC: 3 | RNVC: 2
9253661180: RNCC: 5 | RNVC: 2

4 Feb 1993

5340-14-406-4583
Cover Strip

144064583
FD1C210-221: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-521-0291
Mounting Plate

145210291
2529036: RNCC: 3 | RNVC: 2
CPL 416355: RNCC: 3 | RNVC: 2
3495-04-00: RNCC: 5 | RNVC: 2
CPL416355: RNCC: 5 | RNVC: 2

30 Jun 2000

5340-14-340-3327
Pipe Hanger

143403327
M3C704-229: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-322-1398
Retaining Clip

143221398
47-75-1659: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-251-9472
Handwheel

142519472
32-224-11-08: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-503-2892
Mounting Bracket

145032892
332A64-1535-00: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-294-3047
Loop Clamp

142943047
330A61-3405-23: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-495-6176
Retaining Strap

144956176
S53203-07: RNCC: 3 | RNVC: 2
F300 0T 019 5453: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-483-1447
Loop Clamp

144831447
1050-50-003-07: RNCC: 3 | RNVC: 2

15 Aug 1996

5340-14-286-5097
Angle Bracket

142865097
341A53-1005-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-420-6947
Butt Hinge

144206947
30522-30: RNCC: 3 | RNVC: 2
522-30: RNCC: 5 | RNVC: 2
70385: RNCC: 5 | RNVC: 2

16 Dec 1987

5340-14-531-7643
Access Cover

145317643
27-65001-304-00: RNCC: 3 | RNVC: 2

17 Sep 2002

5340-14-370-1538
Loop Clamp

143701538
MY20515-31-1: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-423-9104
Mounting Plate

144239104
5429-63: RNCC: 3 | RNVC: 2
3-013065: RNCC: 5 | RNVC: 2
5429-6300: RNCC: 5 | RNVC: 2

5 May 1988

5340-14-381-3994
Access Cover

143813994
M525-01936: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-554-9574
Access Cover

145549574
LDO257004/03: RNCC: 3 | RNVC: 2
LDO257004/03: RNCC: 5 | RNVC: 9

12 Sep 2007

5340-14-547-2325
Turnbuckle Body

145472325
21231300-00: RNCC: 3 | RNVC: 2

5 Oct 2005

5340-14-526-4763
Pipe Hanger

145264763
78731-037-100: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-357-7873
Retaining Strap

143577873
1-398-243: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-14-486-3917
Loop Clamp Kit

144863917
332A07-23-959-74: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-308-6543
Rod End Clevis

143086543
595114-120-15BCL: RNCC: 3 | RNVC: 2
595114-120-15BCL: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-411-2668
Loop Clamp

144112668
ASNA0021-25SE20: RNCC: 3 | RNVC: 2
A0021-25SE20: RNCC: 5 | RNVC: 2

6 Aug 1986

5340-14-540-7935
Rod End Clevis

145407935
21226779-00: RNCC: 3 | RNVC: 2
21226779-3: RNCC: 5 | RNVC: 2

23 Apr 2004

5340-14-217-9049
Door Handle

142179049
3160S25-12-017: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-479-6948
Mounting Bracket

144796948
701790: RNCC: 3 | RNVC: 2

31 Jan 1996

5340-14-376-7498
Retaining Strap

143767498
450-10018-000: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-520-5105
Arched Cushion

145205105
MAT169-0012F22DE31: RNCC: 3 | RNVC: 2

19 May 2000

5340-14-437-9526
Corner Brace

144379526
330A21-0443-23: RNCC: 3 | RNVC: 2

28 Feb 1990

5340-14-527-8450
Runner

145278450
J06007-01-6000P002: RNCC: 3 | RNVC: 2

27 Nov 2001

5340-14-496-9089
Mounting Bracket

144969089
NO PRIMARY REF14-496-9089: RNCC: 3 | RNVC: 2
270-01-89228: RNCC: 5 | RNVC: 9
F300 0T 022 2585: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-308-5258
Detent Plunger

143085258
NO PRIMARY REF14-308-5258: RNCC: 3 | RNVC: 2
359172REPU31: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-525-3089
Mounting Plate

145253089
365A35-1152-20: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-326-6726
Strapping

143266726
BANDEIN0X6MM: RNCC: 3 | RNVC: 2
BANDEACIERIN0XE0-5L6MM: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-337-0464
Loop Clamp

143370464
DE1659-40: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-469-5921
Mounting Plate

144695921
160R742430-02: RNCC: 3 | RNVC: 2

4 May 1994

5340-14-441-3170
Mounting Plate

144413170
CIB3-004: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-292-4371
Mounting Bracket

142924371
341A76-1193-10: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-484-9715
Cover Strip

144849715
332A54-1121-23: RNCC: 3 | RNVC: 2

12 Dec 1996

5340-14-527-0711
Mounting Plate

145270711
V016-08: RNCC: 3 | RNVC: 2

1 Oct 2001

5340-14-265-5524
Bumper

142655524
NO PRIMARY REF14-265-5524: RNCC: 3 | RNVC: 2
707454: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-564-9385
Utility Access Door

145649385
160-11758: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-14-336-8112
Rod End Clevis

143368112
NO PRIMARY REF14-336-8112: RNCC: 3 | RNVC: 2
12629990: RNCC: 5 | RNVC: 9

7 Oct 1976

5340-14-277-7634
Access Cover

142777634
M208-27058: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-398-1103
Bridge Clamp

143981103
NO PRIMARY REF14-398-1103: RNCC: 3 | RNVC: 2
A18AP0050-084: RNCC: 5 | RNVC: 9

31 Jan 1985

5340-14-318-0815
Rod End Clevis

143180815
G71-97235: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-512-5489
Section Block Clamp

145125489
F706-74-01: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-270-9477
Retaining Strap

142709477
L1-77-204238: RNCC: 3 | RNVC: 2
204238: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-504-6526
Plug Button

145046526
LS06-001-46: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-14-550-8624
Mounting Plate

145508624
A46447-45: RNCC: 3 | RNVC: 2

25 Jul 2006

5340-14-537-5203
Rigid Caster

145375203
TF4BA125-47R: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-303-4318
Access Cover

143034318
170358: RNCC: 3 | RNVC: 2
20-0432: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-549-9655
Mounting Plate

145499655
2092525-001: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-514-4728
Mounting Plate

145144728
68904: RNCC: 3 | RNVC: 2
IF-192-3305: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-527-5978
Mounting Bracket

145275978
C0R251-830-10: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-14-321-1103
Loop Clamp

143211103
426-26466-000: RNCC: 3 | RNVC: 2
426-26466-000: RNCC: 5 | RNVC: 2
426-26466: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-402-5444
Webbing Strap

144025444
D1337E-2M: RNCC: 3 | RNVC: 2

19 Jul 1985

5340-14-478-1657
Bumper

144781657
65X14X3Z350: RNCC: 3 | RNVC: 2
56494701: RNCC: 5 | RNVC: 2
3511-314-94701: RNCC: 5 | RNVC: 9

11 Oct 1995

5340-14-511-8698
Blank Panel

145118698
330A65-6710-4101: RNCC: 3 | RNVC: 2

27 Jan 1999

5340-14-490-3116
Mounting Bracket

144903116
J05085-04-0600P010: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-409-6723
Retaining Strap

144096723
R4P709-512: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-406-1209
Webbing Strap

144061209
3511 230 16662: RNCC: 3 | RNVC: 2
3511-230-16662: RNCC: 5 | RNVC: 2

8 Jan 1986

5340-14-472-8971
Mounting Bracket

144728971
332A76-3644-21: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-532-9741
Access Cover

145329741
D65740-7: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-14-270-2747
Rod End Connector

142702747
38717: RNCC: 3 | RNVC: 2
67-841-040-01: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-489-6215
Mounting Bracket

144896215
332A61-1331-03: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-384-0827
Bridge Clamp

143840827
NO PRIMARY REF14-384-0827: RNCC: 3 | RNVC: 2
709694: RNCC: 5 | RNVC: 9

4 May 1983

5340-14-434-8165
Mounting Bracket

144348165
332A31-1451-20: RNCC: 3 | RNVC: 2

4 Oct 1989

5340-14-480-9993
Mounting Plate

144809993
500-0191-001: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-14-337-9164
Angle Bracket

143379164
M3E114-17-03: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-499-3077
Mounting Plate

144993077
550245: RNCC: 3 | RNVC: 2
IF185-081: RNCC: 3 | RNVC: 9
F300 0T 021 6263: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-260-3174
Mounting Bracket

142603174
501-990-628-0: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-433-6459
Mounting Bracket

144336459
0372-43-10018: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-302-4841
Access Cover

143024841
3130S95-51-031: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-526-9768
Loop Clamp

145269768
ST159-2M833-41R701: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-373-0161
Threaded Rod End

143730161
1897569518: RNCC: 3 | RNVC: 2
85-691-6910: RNCC: 6 | RNVC: 9

21 Sep 1981

5340-14-531-7251
Loop Clamp

145317251
428-28PA: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-14-431-4874
Angle Bracket

144314874
M208-80150: RNCC: 3 | RNVC: 2

19 Apr 1989

5340-14-476-3751
Loop Clamp

144763751
LN314PA: RNCC: 3 | RNVC: 2
03/C25025114: RNCC: 3 | RNVC: 2
8920900010: RNCC: 5 | RNVC: 2

7 Jun 1995

5340-14-388-8131
Bumper

143888131
11-982-900: RNCC: 3 | RNVC: 2
11-982-900: RNCC: 5 | RNVC: 9

29 Nov 1983

5340-14-407-5102
Runner

144075102
NO PRIMARY REF14-407-5102: RNCC: 3 | RNVC: 2
DM4-48230: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-14-427-0280
Mounting Plate

144270280
355A65-8516-20: RNCC: 3 | RNVC: 2

5 Oct 1988

5340-14-234-5980
Control Rod

142345980
321A42-0017-20: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-031-7782
Webbing Strap

140317782
16299768: RNCC: 1 | RNVC: 2
044U02-20962P: RNCC: 3 | RNVC: 2
0904304Y00: RNCC: 5 | RNVC: 2
16299768: RNCC: 5 | RNVC: 9

5 Jul 1980

5340-14-224-4195
Angle Bracket

142244195
4070-190A102: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-349-8695
Mending Plate

143498695
T69-47: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-398-7562
Case Leg

143987562
0550-000/2011: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-14-040-2837
Threaded Rod End

140402837
NO PRIMARY REF14-040-2837: RNCC: 3 | RNVC: 2
S262607: RNCC: 5 | RNVC: 2
S262607: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-328-4380
Webbing Strap

143284380
6890-0713: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-545-6207
Loop Clamp

145456207
ASNA0021-31S22: RNCC: 1 | RNVC: 2
315302202: RNCC: 3 | RNVC: 2
ASNA0021-31S22: RNCC: 5 | RNVC: 2
A0021-31S22: RNCC: 5 | RNVC: 2
Y31S22: RNCC: 5 | RNVC: 9

26 Apr 2005

5340-14-386-1643
Bow Handle

143861643
703A94-1130-15: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-389-6920
Rim Lock

143896920
1002-08-01: RNCC: 3 | RNVC: 2
SD1002-08-01: RNCC: 5 | RNVC: 2
STD1002-08-01: RNCC: 5 | RNVC: 2

20 Dec 1983

5340-14-498-5195
Bow Handle

144985195
91973578: RNCC: 3 | RNVC: 2
322420-01-02-03: RNCC: 5 | RNVC: 9
F300 0T 005 4792: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-549-8656
Rod End Clevis

145498656
2092491-001: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-473-6089
Access Cover

144736089
452-M3506-000: RNCC: 3 | RNVC: 2
452M3506-000: RNCC: 5 | RNVC: 2

4 Jan 1995

5340-14-314-2589
Angle Bracket

143142589
2342-213: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-549-8372
Mounting Bracket

145498372
169E431-02: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-510-8710
Vent Plug

145108710
EA2M705-48-810: RNCC: 3 | RNVC: 2
85-693-5101: RNCC: 6 | RNVC: 9

18 Nov 1998

5340-14-550-6488
Utility Access Door

145506488
6045-182-000A: RNCC: 3 | RNVC: 2

5 Jul 2006

5340-14-318-3054
Mending Plate

143183054
26-720021-27: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-444-1050
Rim Lock Set

144441050
DP002-051: RNCC: 3 | RNVC: 2

18 Dec 1990

5340-14-509-9844
Access Cover

145099844
NO PRIMARY REF14-509-9844: RNCC: 3 | RNVC: 2
100776: RNCC: 5 | RNVC: 9
5340AA1131747: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-297-4585
Door Hook And Eye

142974585
4508-150LAIT0NCD: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-464-9971
Blank Panel

144649971
365P61-3850-24: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-549-9568
Rim Latch

145499568
19-28-040: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-377-6306
Pipe Hanger

143776306
366A61-2068-00: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-466-2589
Loop Clamp

144662589
0XB501-528-800-01: RNCC: 3 | RNVC: 2

3 Nov 1993

5340-14-466-7939
Mounting Plate

144667939
915-3-69-212: RNCC: 3 | RNVC: 2

26 Nov 1993

5340-14-465-5058
Plate Spacer

144655058
365A81-0113-00: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-528-1791
Loop Clamp

145281791
TDS 85: RNCC: 3 | RNVC: 2
0153632: RNCC: 3 | RNVC: 9
TDS80/85: RNCC: 3 | RNVC: 9

9 Jan 2002

5340-14-468-1591
Angle Bracket

144681591
78703-20-049A: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-541-6390
Loop Clamp

145416390
452-04116-000: RNCC: 3 | RNVC: 2

16 Jun 2004

5340-14-461-3245
T Bracket

144613245
LN400-013REPA1: RNCC: 3 | RNVC: 2
LN400-013F6REPA1: RNCC: 5 | RNVC: 2
LN400013F4REPA1: RNCC: 5 | RNVC: 2
RAB2908: RNCC: 5 | RNVC: 2

8 Mar 1993

5340-14-263-9516
Loop Clamp

142639516
321A59-0106-0001: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-514-4792
Angle Bracket

145144792
45218973: RNCC: 3 | RNVC: 2
45218973: RNCC: 5 | RNVC: 2
IF-192-0274: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-338-3382
Handwheel

143383382
GSM137-013F6: RNCC: 3 | RNVC: 2
GSM137-13F6: RNCC: 5 | RNVC: 2

6 Nov 1976

5340-14-477-0589
Rod End Clevis

144770589
41270: RNCC: 3 | RNVC: 2
WG0045-0404-103: RNCC: 5 | RNVC: 2

19 Jul 1995

5340-14-399-0782
Mounting Plate

143990782
5204-41-157: RNCC: 3 | RNVC: 2
5204-41-157: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-520-3350
Loop Clamp

145203350
MX2139A00: RNCC: 3 | RNVC: 2
BX05M009-014-B: RNCC: 3 | RNVC: 2
0148348: RNCC: 5 | RNVC: 2
SER0148348: RNCC: 5 | RNVC: 9

17 May 2000

5340-14-457-9434
Loop Clamp

144579434
304-088-001-0: RNCC: 3 | RNVC: 2

2 Oct 1992

5340-14-415-6230
Leaf Spring

144156230
NO PRIMARY REF14-415-6230: RNCC: 3 | RNVC: 2
16895-4: RNCC: 5 | RNVC: 9

18 May 1987

5340-14-369-2367
Retaining Strap

143692367
650-403-049-0: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-377-1274
Runner

143771274
AM922-654A: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-505-3753
Mounting Bracket

145053753
1007100451: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-511-6234
Pipe Hanger

145116234
78732-026-030B: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-382-3354
Anchor Strap

143823354
NO PRIMARY REF14-382-3354: RNCC: 3 | RNVC: 2
CMK482: RNCC: 5 | RNVC: 2
CMK482: RNCC: 5 | RNVC: 2
CMK482: RNCC: 5 | RNVC: 2

17 Feb 1983

5340-14-471-1669
Mortise Lock Set

144711669
H13520-39: RNCC: 3 | RNVC: 2

3 Aug 1994

5340-14-373-0594
Retaining Strap

143730594
B0326-009F10: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-401-6265
Rod End Clevis

144016265
502-515-687-0: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-506-8687
Friction Catch

145068687
Z1-04325GA: RNCC: 3 | RNVC: 2

27 May 1998

5340-14-533-5394
Mounting Bracket

145335394
192E375-00: RNCC: 3 | RNVC: 2

10 Feb 2003

5340-14-470-8459
Support Hook

144708459
157E961-00: RNCC: 3 | RNVC: 2
157E961-00: RNCC: 5 | RNVC: 9

8 Jul 1994

5340-14-511-6338
Pipe Hanger

145116338
78733-025-031B: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-286-4440
Loop Clamp

142864440
3160S99-22-010: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-441-1902
Mounting Bracket

144411902
A2250-1-55: RNCC: 3 | RNVC: 2
91501576: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-14-464-5941
Mounting Plate

144645941
1-1213KA00-05: RNCC: 3 | RNVC: 9
1-1213KA00-05: RNCC: 5 | RNVC: 2
1-1213KA00-05: RNCC: 5 | RNVC: 9

11 Aug 1993

5340-14-539-3782
Mounting Bracket

145393782
0-384-02-011-0: RNCC: 3 | RNVC: 2

12 Jan 2004

5340-14-351-4607
Control Rod

143514607
73-081-018: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-347-9440
Anchor Strap

143479440
T20-13G1803: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-511-4105
Protection Bellows

145114105
NO PRIMARY REF14-511-4105: RNCC: 3 | RNVC: 2
C0NTRE: RNCC: 5 | RNVC: 9
5340AA1130496: RNCC: 6 | RNVC: 9

16 Dec 1998

5340-14-389-5352
Mounting Bracket

143895352
365A81-0169-27: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-509-8625
Access Cover

145098625
117-75-1452: RNCC: 3 | RNVC: 2
1560AA1061407: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-467-5856
Butt Hinge

144675856
312-09527-001: RNCC: 3 | RNVC: 2

19 Jan 1994

5340-14-339-4852
Retaining Strap

143394852
M3E701-178: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-370-6704
Anchor Strap

143706704
NO PRIMARY REF14-370-6704: RNCC: 3 | RNVC: 2
7701011984: RNCC: 5 | RNVC: 2
0-01-359: RNCC: 5 | RNVC: 9
18525: RNCC: 5 | RNVC: 9
7701011984: RNCC: 5 | RNVC: 9

5 Jun 1981

5340-14-527-1235
Loop Clamp

145271235
R12-10-6: RNCC: 3 | RNVC: 2
R12-10: RNCC: 5 | RNVC: 2
620-858-510-0: RNCC: 5 | RNVC: 2

3 Oct 2001

5340-14-465-2773
Angle Bracket

144652773
365A61-3001-43: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-333-3809
Angle Bracket

143333809
1050-12-019-13-1: RNCC: 3 | RNVC: 2
12-019-13-1: RNCC: 5 | RNVC: 2
85-688-4938: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-334-8450
Loop Clamp

143348450
826-0-10-44: RNCC: 3 | RNVC: 2

2 Jun 1976

5340-14-572-5163
Utility Resilient Mount

145725163
MP10-280: RNCC: 3 | RNVC: 2
10000400: RNCC: 5 | RNVC: 2

10 Jul 2012

5340-14-521-5739
Webbing Strap

145215739
160-88819-05: RNCC: 3 | RNVC: 2

23 Aug 2000

5340-14-362-3601
Clamping Catch

143623601
NO PRIMARY REF14-362-3601: RNCC: 3 | RNVC: 2
12327-135: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-297-5850
Bumper

142975850
54090-2136: RNCC: 3 | RNVC: 2
10-11709-7: RNCC: 5 | RNVC: 2
85-628-1740: RNCC: 6 | RNVC: 9

1 Jan 1973

5340-14-412-8132
Angle Bracket

144128132
M198-1-04-26: RNCC: 3 | RNVC: 2

5 Nov 1986

5340-14-351-3701
Loop Clamp

143513701
650-403-203-0: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-553-5493
Mounting Plate

145535493
3730-68-01-08: RNCC: 3 | RNVC: 2

16 Apr 2007

5340-14-514-1903
Mounting Bracket

145141903
63803-6316-0: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-14-488-1258
Bridge Clamp

144881258
95331001: RNCC: 3 | RNVC: 2
9-533100-1: RNCC: 5 | RNVC: 2

18 Apr 1997

5340-14-470-5413
Retaining Strap

144705413
EA5M240-94-10: RNCC: 3 | RNVC: 2

22 Jun 1994

5340-14-520-5111
Arched Cushion

145205111
MAT169-0012F22DE41,5: RNCC: 3 | RNVC: 2

19 May 2000

5340-14-323-5875
Mending Plate

143235875
LTCV121-1-4: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-388-8334
Access Cover

143888334
NO PRIMARY REF14-388-8334: RNCC: 3 | RNVC: 2
41201805: RNCC: 5 | RNVC: 9
41201805-1: RNCC: 5 | RNVC: 9

29 Nov 1983

5340-14-471-6244
Mounting Plate

144716244
D53526-1: RNCC: 3 | RNVC: 2

7 Sep 1994

5340-14-490-3153
Mounting Bracket

144903153
J05085-04-0800P018: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-499-4703
Retaining Bail

144994703
25671062: RNCC: 3 | RNVC: 2
2-567106-2: RNCC: 3 | RNVC: 2
F300 0T 022 7596: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-352-5637
Loop Clamp

143525637
3-2606-02-40A: RNCC: 3 | RNVC: 2
3-2606-02-40: RNCC: 5 | RNVC: 2
3-2606-02-40A: RNCC: 5 | RNVC: 2

16 Oct 1978

5340-14-520-2790
Loop Clamp

145202790
W4-40-60-9-74: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-487-4972
Mounting Plate

144874972
25613776: RNCC: 3 | RNVC: 2
2-561377-6: RNCC: 5 | RNVC: 2

10 Apr 1997

5340-14-255-5574
Rod End Clevis

142555574
502-507-762-0: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-334-4967
Webbing Strap

143344967
120640: RNCC: 3 | RNVC: 2

1 Jun 1976

5340-14-361-7079
Retaining Strap

143617079
Q10234-68: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-508-7880
Mounting Bracket

145087880
4918-4-042: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-14-428-7329
Clamping Catch

144287329
GP.10-CH: RNCC: 3 | RNVC: 2
GP10CH: RNCC: 5 | RNVC: 2

15 Dec 1988

5340-14-466-1532
Butt Hinge

144661532
JVBT231-08-03: RNCC: 3 | RNVC: 2
00123618N: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-389-1082
Corner Brace

143891082
366A21-1153-54: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-040-4347
Angle Bracket

140404347
160-78641-16: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-506-1603
Angle Bracket

145061603
458422: RNCC: 3 | RNVC: 2
458422-001: RNCC: 5 | RNVC: 9

8 Apr 1998

5340-14-364-8923
Retaining Strap

143648923
321A60-4620-20: RNCC: 3 | RNVC: 2
85-691-2373: RNCC: 6 | RNVC: 9

2 Sep 1980

5340-14-465-3003
Mounting Bracket

144653003
365A81-0371-00: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-286-9131
Retaining Strap

142869131
ST114M114-2P18A: RNCC: 3 | RNVC: 2
ST114M114-2P18: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-432-1566
Corner Brace

144321566
NO PRIMARY REF14-432-1566: RNCC: 3 | RNVC: 2
3511-318-22611: RNCC: 5 | RNVC: 9

24 May 1989

5340-14-465-1032
Self-Locking Insert

144651032
MAT176-0277: RNCC: 3 | RNVC: 2

14 Sep 1993

5340-14-534-1319
Bumper

145341319
332P69-1326-42: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-301-4550
Eye Hook

143014550
J36-133-100GLAIT: RNCC: 2 | RNVC: 2

1 Jan 1973

5340-14-451-1540
Clamping Catch

144511540
GP.2-EV: RNCC: 3 | RNVC: 2
GP02PEINT-VERT: RNCC: 5 | RNVC: 2
GP02: RNCC: 5 | RNVC: 2

5 Nov 1991

Load More Results