What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 42 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 42 of 446

5340-14-408-5053
Mending Plate

144085053
128252: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-504-0073
Mounting Bracket

145040073
00131300: RNCC: 3 | RNVC: 2
00131300: RNCC: 5 | RNVC: 9

4 Feb 1998

5340-14-537-8383
Mounting Bracket

145378383
16589: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-14-440-1710
Rod End Clevis

144401710
160-82202: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-500-6146
Access Cover

145006146
9603979280: RNCC: 3 | RNVC: 2
0009687: RNCC: 3 | RNVC: 2
F300 0T 024 6330: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-429-8876
Mounting Bracket

144298876
567657: RNCC: 3 | RNVC: 2

15 Feb 1989

5340-14-502-7826
Access Cover

145027826
7C1102: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-546-1788
Angle Bracket

145461788
RA1B701376061A1N1: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-403-9063
Anchor Strap

144039063
3668110: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-382-3585
Angle Bracket

143823585
398001070005: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-505-0384
Access Cover

145050384
5010341651: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-554-4170
Compression Cup

145544170
57400F-C015: RNCC: 3 | RNVC: 2

4 Jul 2007

5340-14-555-7456
Access Cover

145557456
0177557090: RNCC: 3 | RNVC: 2

11 Dec 2007

5340-14-265-7236
Bumper

142657236
C244476: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-464-3248
Access Cover

144643248
5210218: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-442-0948
Angle Bracket

144420948
007614010P: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-14-454-4781
Access Cover

144544781
70902J132942: RNCC: 3 | RNVC: 2
132942: RNCC: 5 | RNVC: 2
5044916: RNCC: 5 | RNVC: 9

2 Apr 1992

5340-14-530-2882
Access Cover

145302882
47242833: RNCC: 3 | RNVC: 2

29 May 2002

5340-14-301-0523
Retaining Strap

143010523
1060510019: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-538-6496
Lock Bolt

145386496
NGM0010060179791: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-549-5246
Mounting Bracket

145495246
61025875AA: RNCC: 3 | RNVC: 2

12 Apr 2006

5340-14-547-9722
Access Cover

145479722
RA1B622332820A1: RNCC: 3 | RNVC: 2

30 Nov 2005

5340-14-540-8245
Access Cover

145408245
X1568279: RNCC: 3 | RNVC: 2

23 Apr 2004

5340-14-508-0349
Access Cover

145080349
4773221680: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-521-5684
Retaining Bail

145215684
160-888225: RNCC: 3 | RNVC: 2

23 Aug 2000

5340-14-474-8796
Mounting Bracket

144748796
059059H01TRA: RNCC: 3 | RNVC: 2
059059H: RNCC: 5 | RNVC: 2

8 Mar 1995

5340-14-453-5593
Retaining Strap

144535593
7700630425: RNCC: 3 | RNVC: 2

26 Feb 1992

5340-14-555-7054
Mounting Bracket

145557054
0292150820: RNCC: 3 | RNVC: 2

10 Dec 2007

5340-14-526-6955
Loop Clamp

145266955
77704720C: RNCC: 3 | RNVC: 2

24 Aug 2001

5340-14-533-9850
Mounting Bracket

145339850
400712: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-418-3367
Anchor Strap

144183367
5-456506: RNCC: 3 | RNVC: 9
4402332: RNCC: 5 | RNVC: 2
5-456506: RNCC: 5 | RNVC: 2
5-456506: RNCC: 5 | RNVC: 9

12 Aug 1987

5340-14-545-2510
Pipe Hanger

145452510
S215A3014105: RNCC: 3 | RNVC: 2

29 Mar 2005

5340-14-463-8332
Loop Clamp

144638332
4280901680: RNCC: 3 | RNVC: 2
4280901680: RNCC: 5 | RNVC: 9

30 Jun 1993

5340-14-504-1985
Access Cover

145041985
1696788M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-465-6459
Loop Clamp

144656459
NSA5516-13NV: RNCC: 3 | RNVC: 2
NSA5516-13NV: RNCC: 5 | RNVC: 2

6 Oct 1993

5340-14-517-1132
Handwheel

145171132
N416-73REP26-10: RNCC: 3 | RNVC: 2

9 Nov 1999

5340-14-546-0361
Mounting Bracket

145460361
16-04-047-03: RNCC: 3 | RNVC: 2

7 Jun 2005

5340-14-544-4747
Mounting Plate

145444747
FE317133200: RNCC: 3 | RNVC: 2
FE317133-200: RNCC: 5 | RNVC: 2

3 Feb 2005

5340-14-542-8985
Mounting Bracket

145428985
708120S120-00B: RNCC: 3 | RNVC: 2

14 Aug 2004

5340-14-340-3603
Access Cover

143403603
M3E681-15-803: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-209-9043
Mending Plate

142099043
NO PRIMARY REF14-209-9043: RNCC: 3 | RNVC: 2
18943: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-351-5943
Loop Clamp

143515943
T20-13G630: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-418-6325
Handwheel

144186325
GSM137-013F25: RNCC: 3 | RNVC: 2

7 Sep 1987

5340-14-377-3829
Loop Clamp

143773829
NO PRIMARY REF14-377-3829: RNCC: 3 | RNVC: 2
45016: RNCC: 5 | RNVC: 2

17 May 1982

5340-14-501-1522
Mounting Bracket

145011522
014-012-042: RNCC: 3 | RNVC: 2
014.012.042: RNCC: 3 | RNVC: 2
F300 0T 025 1924: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-424-6681
Door Holder

144246681
2537852: RNCC: 3 | RNVC: 2
25-37839: RNCC: 5 | RNVC: 2
91605444: RNCC: 5 | RNVC: 2
91743862: RNCC: 5 | RNVC: 2

2 Jun 1988

5340-14-276-2591
Pipe Hanger

142762591
160-11522-15: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-341-1750
Loop Clamp

143411750
M3C703-260: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-278-3313
Pipe Hanger

142783313
160-11524-21: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-414-9999
Mending Plate

144149999
ST406M52P140: RNCC: 3 | RNVC: 2

26 Mar 1987

5340-14-526-5211
Loop Clamp

145265211
51310605010: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-263-4752
Loop Clamp

142634752
L179956: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-382-5136
Tubular Fairlead

143825136
16774709: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-548-1130
Angle Bracket

145481130
RA1A704536713: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-545-3141
Mounting Bracket

145453141
8010240P01: RNCC: 3 | RNVC: 2

4 Apr 2005

5340-14-506-2943
Angle Bracket

145062943
38223711: RNCC: 3 | RNVC: 2
38223711: RNCC: 5 | RNVC: 9

22 Apr 1998

5340-14-351-5267
Angle Bracket

143515267
A7273: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-376-4928
Retaining Band

143764928
120404122: RNCC: 3 | RNVC: 9

28 Apr 1982

5340-14-351-0353
Loop Clamp

143510353
12AX203D344: RNCC: 3 | RNVC: 2
9560117520: RNCC: 5 | RNVC: 2

10 Aug 1978

5340-14-351-0144
Retaining Strap

143510144
193438: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-391-6120
Mounting Plate

143916120
16007307: RNCC: 3 | RNVC: 2
16007307: RNCC: 5 | RNVC: 9

21 Mar 1984

5340-14-335-8950
Angle Bracket

143358950
171744: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-348-7129
Retaining Strap

143487129
1186500: RNCC: 3 | RNVC: 2
1186500: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-363-1062
Doorknob

143631062
BJM00190: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-14-522-3456
Mounting Plate

145223456
GA11379: RNCC: 3 | RNVC: 2

23 Oct 2000

5340-14-508-4296
Retaining Strap

145084296
10464770: RNCC: 3 | RNVC: 2

9 Sep 1998

5340-14-541-8519
Mounting Bracket

145418519
J10454-01-5000P001: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-517-6651
Metal Grille

145176651
DA1N201794600A2: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-339-2856
Loop Clamp

143392856
NO PRIMARY REF14-339-2856: RNCC: 3 | RNVC: 2
822602: RNCC: 5 | RNVC: 9
23319500: RNCC: 5 | RNVC: 9

18 Jan 1977

5340-14-202-5341
Loop Clamp

142025341
51100019008: RNCC: 3 | RNVC: 2
15N8: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-14-329-8953
Handwheel

143298953
DV1301-12: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-305-6263
Butt Hinge

143056263
40BC50X35: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-412-2095
Detent Plunger

144122095
332A21-1391-21: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-408-0281
Mounting Plate

144080281
20722243-7: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-496-2296
Mounting Plate

144962296
75067-9: RNCC: 3 | RNVC: 2
F300 0T 021 0475: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-524-6621
Mounting Bracket

145246621
504454: RNCC: 3 | RNVC: 2

3 Apr 2001

5340-14-331-7029
Bow Handle

143317029
BAZ1693: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-370-6776
Access Cover

143706776
E753-175: RNCC: 3 | RNVC: 2
E753-175: RNCC: 5 | RNVC: 9

5 Jun 1981

5340-14-207-7842
Tubular Fairlead

142077842
0000244156: RNCC: 3 | RNVC: 2
0000244156: RNCC: 5 | RNVC: 9
244156: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-378-7146
Clamping Catch

143787146
2315675: RNCC: 3 | RNVC: 2
2315675: RNCC: 5 | RNVC: 9
53892315675: RNCC: 5 | RNVC: 9
53892315675: RNCC: 5 | RNVC: 9
85-590-9850: RNCC: 6 | RNVC: 9

11 Aug 1982

5340-14-417-1684
Butt Hinge

144171684
110-2724-06-03PC30: RNCC: 3 | RNVC: 2
110-2724-06-03: RNCC: 5 | RNVC: 2
85-693-4161: RNCC: 6 | RNVC: 9

1 Jul 1987

5340-14-286-4789
Mending Plate

142864789
341A25-1000-45: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-277-1552
Retaining Strap

142771552
9131438: RNCC: 3 | RNVC: 2
9131438: RNCC: 3 | RNVC: 9

1 Jan 1971

5340-14-475-1741
Loop Clamp

144751741
51311706015: RNCC: 3 | RNVC: 2
575482: RNCC: 5 | RNVC: 2

22 Mar 1995

5340-14-393-6442
Butt Hinge

143936442
3617BAVECGRAISSEUR: RNCC: 3 | RNVC: 2

7 Jun 1984

5340-14-471-9754
Snap Hook

144719754
12477: RNCC: 3 | RNVC: 2

28 Sep 1994

5340-14-508-1164
Loop Clamp

145081164
4918-2-901: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-479-2652
Access Cover

144792652
23630551-4: RNCC: 3 | RNVC: 2

3 Jan 1996

5340-14-374-4902
Angle Bracket

143744902
A11A221220073: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-471-2977
Mortise Lock Set

144712977
5280INOXGAUCHETIRANT: RNCC: 3 | RNVC: 2

12 Aug 1994

5340-14-433-1186
Strap Fastener Loop

144331186
TC347A: RNCC: 3 | RNVC: 2
91475898: RNCC: 5 | RNVC: 2

11 Jul 1989

5340-14-439-8656
Access Cover

144398656
902.89.03.16: RNCC: 3 | RNVC: 2

29 May 1990

5340-14-200-4379
Strap End Clip

142004379
AMG9282-1: RNCC: 3 | RNVC: 2
000687007P: RNCC: 5 | RNVC: 2

1 Jan 1962

5340-14-379-8350
Access Cover

143798350
2873-3: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-461-0163
Thumb Latch

144610163
16315851: RNCC: 3 | RNVC: 2
16315851: RNCC: 5 | RNVC: 9

17 Feb 1993

5340-14-464-6430
Flush Catch Claw

144646430
81420642: RNCC: 3 | RNVC: 2

18 Aug 1993

5340-14-352-6450
Retaining Strap

143526450
BY148A10240: RNCC: 3 | RNVC: 2
BFC10240: RNCC: 5 | RNVC: 2

14 Nov 1978

5340-14-463-7309
Mounting Plate

144637309
730919: RNCC: 3 | RNVC: 2
89296022: RNCC: 5 | RNVC: 9

23 Jun 1993

5340-14-528-8847
Butt Hinge

145288847
SAMD E 41159: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-14-326-4231
Bumper

143264231
203578: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-539-5659
Mounting Bracket

145395659
10640239: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-400-7534
Friction Catch

144007534
18101-3: RNCC: 3 | RNVC: 2
18101-3: RNCC: 5 | RNVC: 2

21 May 1985

5340-14-399-6997
Quick Release Pin

143996997
254234: RNCC: 3 | RNVC: 2
254234: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-498-1955
Access Cover

144981955
12440CBA51-4: RNCC: 3 | RNVC: 2
91923069: RNCC: 3 | RNVC: 2
F300 0T 004 5518: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-470-6824
Mounting Plate

144706824
20766268-6: RNCC: 3 | RNVC: 2
89275257: RNCC: 5 | RNVC: 2

29 Jun 1994

5340-14-515-8830
Angle Bracket

145158830
2100124: RNCC: 3 | RNVC: 2

23 Aug 1999

5340-14-447-7272
Bridge Clamp

144477272
1DA058R0302064: RNCC: 3 | RNVC: 2

29 May 1991

5340-14-540-2076
Leakproof Seal Plug

145402076
118051: RNCC: 3 | RNVC: 2

11 Mar 2004

5340-14-397-9142
Access Cover

143979142
475087Y: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-450-8262
Access Cover

144508262
16803568: RNCC: 3 | RNVC: 2
16803568: RNCC: 3 | RNVC: 9

23 Oct 1991

5340-14-396-5822
Strap Fastener Loop

143965822
01414: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-433-6166
Mounting Plate

144336166
39232456: RNCC: 3 | RNVC: 2
39232456: RNCC: 5 | RNVC: 9

2 Aug 1989

5340-14-532-3171
Track Stop

145323171
NSA937901S1: RNCC: 3 | RNVC: 2
NSA937901S1: RNCC: 5 | RNVC: 2

30 Oct 2002

5340-14-422-2767
Loop Clamp

144222767
511131050501: RNCC: 3 | RNVC: 2
35G50: RNCC: 5 | RNVC: 2

24 Feb 1988

5340-14-494-4410
Access Cover

144944410
N53 046 70: RNCC: 3 | RNVC: 2
F300 0T 017 3341: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-526-5824
Utility Access Door

145265824
DH1F292354: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-410-1012
Plug Button

144101012
29392886: RNCC: 3 | RNVC: 2

4 Jun 1986

5340-14-389-3478
Retaining Strap

143893478
A11A221257602: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-257-7543
Retaining Strap

142577543
31627: RNCC: 3 | RNVC: 9

1 Jan 1969

5340-14-320-1648
Plug Button

143201648
0243890220: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-554-6938
Mounting Bracket

145546938
82391893000: RNCC: 3 | RNVC: 2

7 Aug 2007

5340-14-434-1966
Anchor Strap

144341966
552510: RNCC: 3 | RNVC: 2

12 Sep 1989

5340-14-031-0612
Rod End Clevis

140310612
55030: RNCC: 3 | RNVC: 2
VDPM02841: RNCC: 5 | RNVC: 2

14 Jun 1980

5340-14-445-4356
Shelf Bracket

144454356
R262-15-3: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-297-9505
Access Cover

142979505
6101-1939: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-299-0938
Retaining Strap

142990938
121E63-365-02-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-515-8565
Metal Grille

145158565
MAT853-0149F11REP6: RNCC: 3 | RNVC: 2
3HDF575X205RAL9010: RNCC: 3 | RNVC: 2

18 Aug 1999

5340-14-307-2542
Corner Brace

143072542
TS19817-3: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-457-0118
Plug Button

144570118
103-33-48-2: RNCC: 3 | RNVC: 2
103-33-48-2: RNCC: 5 | RNVC: 2

30 Jul 1992

5340-14-369-1615
Utility Access Door

143691615
365A84-3008-08: RNCC: 3 | RNVC: 2

14 Mar 1996

5340-14-439-2435
Mounting Plate

144392435
332A52-1226-20: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-542-1225
Butt Hinge

145421225
5302835-042-02B: RNCC: 3 | RNVC: 2

7 Jul 2004

5340-14-452-3228
Mounting Bracket

144523228
T20-13B450: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-489-5780
Block Clamp

144895780
FE1C710-38: RNCC: 3 | RNVC: 2

5 Aug 1997

5340-14-539-7099
Rigid Caster

145397099
3/LVG40327/1: RNCC: 3 | RNVC: 2

3 Feb 2004

5340-14-365-7516
Bumper

143657516
3167A2: RNCC: 3 | RNVC: 9
5-53-1036: RNCC: 5 | RNVC: 9

8 Oct 1980

5340-14-492-6478
Mounting Bracket

144926478
NO PRIMARY REF14-492-6478: RNCC: 3 | RNVC: 2
M0379: RNCC: 5 | RNVC: 9
F300 0T 008 3640: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-441-0770
Plug Button

144410770
1553083: RNCC: 3 | RNVC: 2
125013: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-14-542-8062
Locking Stay

145428062
T070G1005809: RNCC: 3 | RNVC: 2

14 Aug 2004

5340-14-529-8739
Access Cover

145298739
364788: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-531-6660
Access Cover

145316660
0847054T00: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-14-558-1272
Utility Resilient Mount

145581272
440059: RNCC: 3 | RNVC: 2

3 Sep 2008

5340-14-429-8902
Angle Bracket

144298902
5156138300: RNCC: 3 | RNVC: 2
561383: RNCC: 5 | RNVC: 2

15 Feb 1989

5340-14-532-0608
Cover Strip

145320608
03-250-566: RNCC: 3 | RNVC: 2
SZ03.250.566: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-350-1250
Angle Bracket

143501250
16609330: RNCC: 3 | RNVC: 2
16609330: RNCC: 3 | RNVC: 9

14 Jun 1978

5340-14-441-9414
Angle Bracket

144419414
9440132: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-461-2623
Bow Handle

144612623
SHS1A0534A: RNCC: 3 | RNVC: 2

3 Mar 1993

5340-14-557-9201
Utility Access Door

145579201
213174: RNCC: 3 | RNVC: 2

30 Jul 2008

5340-14-423-9512
Webbing Strap

144239512
542853: RNCC: 3 | RNVC: 2

5 May 1988

5340-14-530-0010
Mounting Bracket

145300010
351119273361: RNCC: 3 | RNVC: 2

26 Apr 2002

5340-14-533-4859
Mounting Bracket

145334859
10683216000: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-399-1160
Leaf Spring

143991160
5000714040: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-422-8097
Pipe Hanger

144228097
39063376: RNCC: 3 | RNVC: 2

17 Mar 1988

5340-14-535-4145
Angle Bracket

145354145
5010514350: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-428-3564
Loop Clamp

144283564
521231050141: RNCC: 3 | RNVC: 2
115GE14: RNCC: 5 | RNVC: 2

8 Dec 1988

5340-14-454-4615
Butt Hinge

144544615
3165202: RNCC: 3 | RNVC: 2

2 Apr 1992

5340-14-420-4592
Webbing Strap

144204592
06192077: RNCC: 3 | RNVC: 2

10 Dec 1987

5340-14-535-3382
Webbing Strap

145353382
F221S0013B008---225: RNCC: 3 | RNVC: 2
9983948: RNCC: 5 | RNVC: 2

22 May 2003

5340-14-301-4334
Hinge Torsion Bar

143014334
14-104-280-01: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-454-4877
Access Cover

144544877
P2C001032-00: RNCC: 3 | RNVC: 9
313854: RNCC: 5 | RNVC: 2
145533: RNCC: 5 | RNVC: 2
5044941: RNCC: 5 | RNVC: 9

2 Apr 1992

5340-14-339-4810
Retaining Strap

143394810
M3E702-16-810: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-225-8548
Loop Clamp

142258548
3160S73-83-010: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-324-0314
Rod End Clevis

143240314
901-700-60: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-480-5699
Access Cover

144805699
002415890A: RNCC: 3 | RNVC: 2
8702-001: RNCC: 3 | RNVC: 2

14 Mar 1996

5340-14-403-5086
Access Cover

144035086
9760-271: RNCC: 3 | RNVC: 9

21 Aug 1985

5340-14-527-5975
Mounting Bracket

145275975
C0R251-820-70: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-14-448-6375
Swivel Caster

144486375
HP6BA150-23B: RNCC: 3 | RNVC: 2
HP6BA160-23B: RNCC: 5 | RNVC: 2

4 Jul 1991

5340-14-477-6805
Clamping Catch

144776805
GE0018-19840EIB: RNCC: 3 | RNVC: 2
0018-19840EIB: RNCC: 5 | RNVC: 2
GE.18/19840-EIB: RNCC: 5 | RNVC: 2

19 Sep 1995

5340-14-514-5029
Angle Bracket

145145029
45219935: RNCC: 3 | RNVC: 2
45219935: RNCC: 5 | RNVC: 2
IF-192-0446: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-347-1332
Cover Strip

143471332
3160S25-11-012: RNCC: 3 | RNVC: 2
85-688-5846: RNCC: 6 | RNVC: 9

19 Jan 1978

5340-14-549-6280
Mounting Plate

145496280
JCB 10 135-868: RNCC: 3 | RNVC: 2

24 Apr 2006

5340-14-352-8381
Retaining Strap

143528381
3160S73-06-554: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-430-9369
Angle Bracket

144309369
G230013-06: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-14-517-8794
Lock Bolt

145178794
446001070005: RNCC: 3 | RNVC: 2

17 Jan 2000

5340-14-527-4215
Mounting Plate

145274215
P108506V: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-539-5278
Mounting Bracket

145395278
WAC425FR: RNCC: 3 | RNVC: 2
WAC425FR: RNCC: 5 | RNVC: 2

22 Jan 2004

5340-14-439-6789
Mounting Bracket

144396789
16291414: RNCC: 3 | RNVC: 2
16291414: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-344-2516
Mending Plate

143442516
30163: RNCC: 3 | RNVC: 2

10 Aug 1977

5340-14-504-3138
Doorstop

145043138
3759749M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-383-5124
Angle Bracket

143835124
16960723: RNCC: 3 | RNVC: 2
16960723: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-549-9382
Mounting Plate

145499382
F1263850: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-474-2333
Mounting Plate

144742333
0904-102A130: RNCC: 3 | RNVC: 2
0904-102A130: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-14-564-3297
Utility Access Door

145643297
ISO5NCAA14: RNCC: 3 | RNVC: 2

23 Apr 2010

5340-14-437-9611
Mounting Bracket

144379611
89099200: RNCC: 3 | RNVC: 2
65146Z: RNCC: 5 | RNVC: 2

28 Feb 1990

5340-14-446-1572
Cover Strip

144461572
PM1A239300009: RNCC: 3 | RNVC: 2
PM1A239300009: RNCC: 5 | RNVC: 2

6 Mar 1991

5340-14-504-2101
Loop Clamp

145042101
3010156X1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-563-6338
Utility Access Door

145636338
A03M089: RNCC: 3 | RNVC: 2

2 Mar 2010

5340-14-407-6480
Retaining Band

144076480
12AX36: RNCC: 3 | RNVC: 9

27 Feb 1986

5340-14-350-2683
Loop Clamp

143502683
T3040CX14002A: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-412-8917
Support Hook

144128917
050C67-687961M: RNCC: 3 | RNVC: 2

5 Nov 1986

5340-14-330-3603
Butt Hinge

143303603
30X40: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-541-5481
Angle Bracket

145415481
31105235: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-551-3422
Angle Bracket

145513422
RA1A701326421: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-438-2363
Mounting Bracket

144382363
DA2C317001: RNCC: 3 | RNVC: 2

7 Mar 1990

5340-14-360-1582
Retaining Strap

143601582
762726: RNCC: 3 | RNVC: 2
762726: RNCC: 5 | RNVC: 9

31 Oct 1979

5340-14-470-0537
Loop Clamp

144700537
SM414PARDPAS316TI: RNCC: 3 | RNVC: 2

26 May 1994

5340-14-536-9724
Doorknob

145369724
23.44551: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-366-8290
Bumper

143668290
15170848: RNCC: 3 | RNVC: 2
15170848: RNCC: 5 | RNVC: 2
15170848: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-414-2025
Runner

144142025
254316: RNCC: 3 | RNVC: 2
254316: RNCC: 5 | RNVC: 9

22 Jan 1987

5340-14-358-5315
Angle Bracket

143585315
5000495818: RNCC: 3 | RNVC: 2
5000495818: RNCC: 5 | RNVC: 9

7 Sep 1979

5340-14-391-6004
Loop Clamp

143916004
494322G0007: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-455-9076
Plate Spacer

144559076
PM1A726279006: RNCC: 3 | RNVC: 2
PM1A726279006: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-406-8743
Retaining Strap

144068743
02134034500: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-452-8732
Mounting Plate

144528732
31725942: RNCC: 3 | RNVC: 9

22 Jan 1992

5340-14-291-4189
Mending Plate

142914189
121E23-623-06-2: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-327-9991
Loop Clamp

143279991
05097: RNCC: 3 | RNVC: 2
09988: RNCC: 3 | RNVC: 2
5097-0RM55: RNCC: 3 | RNVC: 2
2 16 09988 XX: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-365-3199
Loop Clamp

143653199
650-403-001-0: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-438-6819
Mounting Bracket

144386819
S00-806: RNCC: 3 | RNVC: 2

28 Mar 1990

5340-14-550-3349
Mounting Bracket

145503349
2716051600: RNCC: 3 | RNVC: 2

16 Jun 2006

5340-14-549-8458
Metal Grille

145498458
F1260564: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-411-5658
Loop Clamp

144115658
G32: RNCC: 3 | RNVC: 2

25 Aug 1986

5340-14-374-6521
Runner

143746521
68375: RNCC: 3 | RNVC: 2
12475: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-546-2954
Mounting Bracket

145462954
10536884: RNCC: 3 | RNVC: 2

22 Jun 2005

5340-14-471-4870
Loop Clamp

144714870
2015281Y: RNCC: 3 | RNVC: 2

31 Aug 1994

5340-14-482-8980
Mounting Bracket

144828980
RA1M721316400: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-471-9446
Detent Plunger

144719446
38018380: RNCC: 3 | RNVC: 2
38018380: RNCC: 5 | RNVC: 9

28 Sep 1994

5340-14-295-1000
Pipe Hanger

142951000
274348: RNCC: 3 | RNVC: 2
274348: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-503-9593
Dashpot

145039593
21552304: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-14-378-9002
Retaining Strap

143789002
0035665232: RNCC: 3 | RNVC: 2
0035665232: RNCC: 5 | RNVC: 9
35665232: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-14-277-7479
Rod End Clevis

142777479
49058: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-437-0946
Rod End Clevis

144370946
CEY10S10JF190: RNCC: 3 | RNVC: 2

17 Jan 1990

5340-14-381-5425
Access Cover

143815425
005188210M: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-489-5402
Blank Panel

144895402
45564696: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-14-355-8410
Recess Handle

143558410
18125667: RNCC: 3 | RNVC: 2
18125667: RNCC: 3 | RNVC: 9

5 Apr 1979

5340-14-485-2709
Loop Clamp

144852709
189316-222: RNCC: 3 | RNVC: 9

15 Jan 1997

5340-14-370-6713
Retaining Strap

143706713
0035651122: RNCC: 3 | RNVC: 2
0035651122: RNCC: 5 | RNVC: 9
35651122: RNCC: 5 | RNVC: 9

5 Jun 1981

5340-14-476-5002
Retaining Strap

144765002
45212992: RNCC: 3 | RNVC: 2
45212992: RNCC: 3 | RNVC: 9

14 Jun 1995

5340-14-551-9987
Mounting Bracket

145519987
1SH41764292: RNCC: 3 | RNVC: 2

16 Nov 2006

5340-14-472-2276
Loop Clamp

144722276
68939006: RNCC: 3 | RNVC: 2
68939006: RNCC: 5 | RNVC: 9

12 Oct 1994

5340-14-508-0625
Mounting Bracket

145080625
45411983: RNCC: 3 | RNVC: 2
45411983: RNCC: 5 | RNVC: 9

26 Aug 1998

5340-14-399-0480
Webbing Strap

143990480
16805421: RNCC: 3 | RNVC: 2
16805421: RNCC: 3 | RNVC: 9

6 Mar 1985

5340-14-526-9794
Mounting Bracket

145269794
GA71163: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-473-3028
Access Cover

144733028
1BM00813AAAA: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-442-2043
Mounting Plate

144422043
20122622: RNCC: 3 | RNVC: 2

3 Oct 1990

5340-14-494-9085
Mounting Plate

144949085
5447918: RNCC: 3 | RNVC: 2
F300 0T 018 0631: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-488-7273
Access Cover

144887273
0882548X00: RNCC: 3 | RNVC: 2

28 May 1997

5340-14-455-7456
Access Cover

144557456
162203300: RNCC: 3 | RNVC: 2
162203300: RNCC: 5 | RNVC: 2
1622033000000: RNCC: 5 | RNVC: 2
5000294260: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-367-4571
Access Cover

143674571
15706049: RNCC: 3 | RNVC: 2
15706049: RNCC: 5 | RNVC: 2
15706049: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-376-6917
Mending Plate

143766917
045S03-576021X: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-392-9421
Access Cover

143929421
5000588805: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-528-9883
Mounting Bracket

145289883
705932: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-14-508-0911
Webbing Strap

145080911
F00134334: RNCC: 3 | RNVC: 2
F00134334: RNCC: 5 | RNVC: 9

26 Aug 1998

5340-14-558-6163
Utility Resilient Mount

145586163
82371455000: RNCC: 3 | RNVC: 2

16 Oct 2008

5340-14-438-8708
Anchor Strap

144388708
005062010085: RNCC: 3 | RNVC: 2
0049200: RNCC: 5 | RNVC: 2

10 Apr 1990

5340-14-438-8701
Rod End Clevis

144388701
005062010129: RNCC: 3 | RNVC: 2
0049212: RNCC: 5 | RNVC: 2

10 Apr 1990

5340-14-530-0939
Access Cover

145300939
1080293N00: RNCC: 3 | RNVC: 2

14 May 2002

5340-14-515-4043
Mounting Bracket

145154043
20512166F: RNCC: 3 | RNVC: 2
20512166: RNCC: 5 | RNVC: 2

13 Jul 1999

5340-14-297-3731
Loop Clamp

142973731
15133686: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-471-6565
Mounting Plate

144716565
5010045142: RNCC: 3 | RNVC: 2

7 Sep 1994

5340-14-542-5155
Exit Bolt

145425155
1SH41764302: RNCC: 3 | RNVC: 2
1SH41764317: RNCC: 5 | RNVC: 9

21 Jul 2004

5340-14-416-6862
Angle Bracket

144166862
412902020019: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-309-7345
Loop Clamp

143097345
C60875: RNCC: 3 | RNVC: 2
C60875: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-474-7678
Butt Hinge

144747678
4103MONIN: RNCC: 3 | RNVC: 2

1 Mar 1995

5340-14-422-9272
Loop Clamp

144229272
5172130600: RNCC: 3 | RNVC: 2

24 Mar 1988

5340-14-356-8819
Access Cover

143568819
6202284: RNCC: 3 | RNVC: 2

15 May 1979

5340-14-545-7005
Mounting Plate

145457005
RA1A703836311A1N1: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-341-8176
Access Cover

143418176
713780: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-529-3204
Lock Bolt

145293204
3C93-021: RNCC: 3 | RNVC: 2

20 Mar 2002

5340-14-202-4010
Rod End Connector

142024010
0000352975: RNCC: 3 | RNVC: 2
0000352975: RNCC: 5 | RNVC: 9
352975: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-14-380-0977
Mounting Plate

143800977
6254-21672: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-504-1377
Anchor Strap

145041377
P4H021356-00: RNCC: 3 | RNVC: 2

10 Feb 1998

5340-14-224-6081
Bumper

142246081
773-416-209F15: RNCC: 3 | RNVC: 2
773-416-209FF15: RNCC: 5 | RNVC: 9
773-416-209F15: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-230-7329
Handwheel

142307329
GSM137-001F17-9C1: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-549-9148
Bumper

145499148
2092466-001: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-572-8398
Utility Resilient Mount

145728398
E1RP-3805-51: RNCC: 3 | RNVC: 2

9 Aug 2012

5340-14-262-8287
Leaf Spring

142628287
NO PRIMARY REF14-262-8287: RNCC: 3 | RNVC: 2
D17264: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-428-2657
Quick Release Pin

144282657
14A1315: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-534-9651
Snap Hook

145349651
AJ510: RNCC: 3 | RNVC: 2
SC020830: RNCC: 6 | RNVC: 9

23 Apr 2003

5340-14-456-5893
Angle Bracket

144565893
TB3011031: RNCC: 3 | RNVC: 2

9 Jul 1992

5340-14-530-6851
Cover Strip

145306851
T524A2001504: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-504-3365
Butt Hinge

145043365
3900657M91: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-453-6280
Mounting Plate

144536280
12-043-300: RNCC: 3 | RNVC: 2
12-043-300: RNCC: 5 | RNVC: 9

3 Mar 1992

5340-14-534-7188
Mounting Bracket

145347188
10589316: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-366-1012
Synchro Clamp

143661012
RP988541: RNCC: 3 | RNVC: 2
RP988541: RNCC: 5 | RNVC: 2

4 Nov 1980

5340-14-391-9922
Access Cover

143919922
914-000: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-516-0714
Push Door Plate

145160714
10484432: RNCC: 3 | RNVC: 2
IF-192-2959: RNCC: 5 | RNVC: 9

8 Sep 1999

5340-14-209-8414
Shelf Bracket

142098414
75042: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-535-7812
Access Cover

145357812
546537-001: RNCC: 3 | RNVC: 9

25 Jun 2003

5340-14-473-3778
Angle Bracket

144733778
332A21-3271-01: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-405-6218
Rod End Clevis

144056218
0907-171-400A: RNCC: 3 | RNVC: 2

4 Dec 1985

5340-14-399-6960
Anchor Strap

143996960
21100200: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-341-0835
Access Cover

143410835
16398375: RNCC: 3 | RNVC: 2
16398375: RNCC: 3 | RNVC: 9
51046: RNCC: 5 | RNVC: 9

16 Mar 1977

5340-14-329-7611
Retaining Strap

143297611
21S0300601: RNCC: 3 | RNVC: 2
21S0300601: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-506-0371
Pipe Hanger

145060371
RA1M701972131: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-14-396-0619
Anchor Strap

143960619
CM14179202: RNCC: 3 | RNVC: 9

27 Nov 1984

5340-14-334-4620
Webbing Strap

143344620
120112: RNCC: 3 | RNVC: 2
MAF0001002826: RNCC: 6 | RNVC: 9

1 Jun 1976

5340-14-553-4616
Angle Bracket

145534616
DE2B236700010: RNCC: 3 | RNVC: 2

5 Apr 2007

5340-14-505-7440
Access Cover

145057440
39457065: RNCC: 3 | RNVC: 9
39457065: RNCC: 5 | RNVC: 9

26 Mar 1998

5340-14-411-6947
Flush Lock

144116947
1201E: RNCC: 3 | RNVC: 2
1201EGDI78: RNCC: 3 | RNVC: 9
45078: RNCC: 5 | RNVC: 2

27 Aug 1986

5340-14-373-6517
Rod End Clevis

143736517
BAZ3341: RNCC: 3 | RNVC: 2

13 Nov 1981

5340-14-414-7437
Access Cover

144147437
944793: RNCC: 3 | RNVC: 2
944793: RNCC: 5 | RNVC: 9

26 Feb 1987

5340-14-330-2685
Retaining Band

143302685
522906: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-206-3139
Access Cover

142063139
0000351395: RNCC: 3 | RNVC: 2
0000351395: RNCC: 5 | RNVC: 9
351395: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-409-4098
Access Cover

144094098
3009017: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-316-9368
Access Cover

143169368
466-8A1P7: RNCC: 3 | RNVC: 2
466-8A1P7: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-240-6732
Access Cover

142406732
70665729: RNCC: 3 | RNVC: 2
M289027: RNCC: 5 | RNVC: 9
70655723: RNCC: 5 | RNVC: 9
70665729: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-555-5941
Loop Clamp

145555941
78651RH17-5: RNCC: 1 | RNVC: 2
78651RH17-5: RNCC: 3 | RNVC: 2

29 Nov 2007

5340-14-312-1220
Rod End Clevis

143121220
181829: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-477-7936
Pipe Hanger

144777936
050140: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-14-510-6846
Access Cover

145106846
46108216: RNCC: 3 | RNVC: 2

4 Nov 1998

5340-14-473-1011
Mounting Bracket

144731011
465025: RNCC: 3 | RNVC: 2
465025: RNCC: 5 | RNVC: 9

7 Dec 1994

5340-14-374-6069
Access Cover

143746069
5000536612: RNCC: 3 | RNVC: 2
5000536612: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-519-2775
Foot Bolt

145192775
P4483957: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-520-1668
Mounting Plate

145201668
20855673: RNCC: 3 | RNVC: 9

17 May 2000

5340-14-475-5922
Belt-Strap Keeper

144755922
8511: RNCC: 3 | RNVC: 2
8511: RNCC: 5 | RNVC: 9

19 Apr 1995

5340-14-516-2329
Eye Hook

145162329
0054045: RNCC: 3 | RNVC: 2

15 Sep 1999

5340-14-517-4308
Angle Bracket

145174308
27162400-8: RNCC: 3 | RNVC: 2
27162400-8: RNCC: 5 | RNVC: 2

13 Dec 1999

5340-14-439-2048
Mounting Bracket

144392048
39442355: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-385-5669
Rigid Caster

143855669
TF4BA100-23L: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-334-7723
Retaining Strap

143347723
7133-1681-11: RNCC: 3 | RNVC: 2

2 Jun 1976

5340-14-464-9557
Cover Strip

144649557
365A25-0034-30: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-268-8571
Mounting Plate

142688571
ST104M432-2P63: RNCC: 3 | RNVC: 2
STK156674: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-441-6172
Angle Bracket

144416172
332A91-8216-00: RNCC: 3 | RNVC: 2

5 Sep 1990

5340-14-216-1103
Retaining Band

142161103
410070: RNCC: 3 | RNVC: 2
410070: RNCC: 5 | RNVC: 2
410070: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-548-1062
Angle Bracket

145481062
RA1A702506027: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-417-0909
Loop Clamp

144170909
5171602400: RNCC: 3 | RNVC: 2
716024: RNCC: 5 | RNVC: 2

1 Jul 1987

5340-14-549-7614
Angle Bracket

145497614
S521A2051152: RNCC: 3 | RNVC: 2

10 May 2006

5340-14-549-3087
Mounting Bracket

145493087
5010636098: RNCC: 3 | RNVC: 2

21 Mar 2006

5340-14-551-3448
Angle Bracket

145513448
RA1M701396191A1N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-383-4611
Loop Clamp

143834611
20193394: RNCC: 3 | RNVC: 2
20193394: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-479-2651
Angle Bracket

144792651
LA01PD030006: RNCC: 3 | RNVC: 9
LA01PD030006: RNCC: 5 | RNVC: 2

3 Jan 1996

5340-14-533-7679
Door Handle

145337679
30352656A: RNCC: 3 | RNVC: 2

21 Feb 2003

5340-14-416-6803
Angle Bracket

144166803
412802020007: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-394-1639
Butt Hinge

143941639
1014-30X200ACIERZINGUEBICHR0MATE: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-545-3629
Blank Panel

145453629
4759-9911: RNCC: 3 | RNVC: 2

7 Apr 2005

5340-14-396-3520
Access Cover

143963520
5000802518: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-361-1242
Access Cover

143611242
16294013: RNCC: 3 | RNVC: 2
16294013: RNCC: 5 | RNVC: 9

24 Jan 1980

5340-14-441-9330
Access Cover

144419330
005062010121: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-480-0082
Access Cover

144800082
462444CA: RNCC: 3 | RNVC: 2
462444CA: RNCC: 5 | RNVC: 9

21 Feb 1996

5340-14-466-1832
Mounting Bracket

144661832
167162: RNCC: 3 | RNVC: 2
89170260: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-405-7746
Synchro Clamp

144057746
1460932: RNCC: 3 | RNVC: 2

4 Dec 1985

5340-14-459-2442
Access Cover

144592442
2090-243C507: RNCC: 3 | RNVC: 2
2090-243C507: RNCC: 5 | RNVC: 2

19 Nov 1992

5340-14-352-6766
Butt Hinge

143526766
0016960010: RNCC: 3 | RNVC: 2
0016960010: RNCC: 5 | RNVC: 9

14 Nov 1978

5340-14-402-1038
Mending Plate

144021038
400548: RNCC: 3 | RNVC: 2
BGE400548: RNCC: 5 | RNVC: 2

26 Jun 1985

5340-14-457-6190
Block Clamp

144576190
PM1A741194010: RNCC: 3 | RNVC: 2
PM1A741194010: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-545-3653
Mounting Bracket

145453653
T242G4001101: RNCC: 3 | RNVC: 2

8 Apr 2005

5340-14-469-3816
Retaining Strap

144693816
0607657200: RNCC: 3 | RNVC: 2
0607657200: RNCC: 3 | RNVC: 2

20 Apr 1994

5340-14-535-3879
Loop Clamp

145353879
5010282607: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-525-2586
Metal Grille

145252586
06470P011085: RNCC: 3 | RNVC: 2
01440701: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-553-6839
Mounting Plate

145536839
82089424000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-460-8298
Mounting Bracket

144608298
016304: RNCC: 3 | RNVC: 2

10 Feb 1993

5340-14-448-3902
Webbing Strap

144483902
9416ADC101-9: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-14-551-9641
Mounting Bracket

145519641
210421-0: RNCC: 3 | RNVC: 2

14 Nov 2006

5340-14-482-7221
Mortise Latch

144827221
1099896F00: RNCC: 3 | RNVC: 2

25 Jul 1996

5340-14-520-6212
Mending Plate

145206212
PR47587-2: RNCC: 3 | RNVC: 2

24 May 2000

5340-14-401-1238
Rod End Connector

144011238
4771520910: RNCC: 3 | RNVC: 2

29 May 1985

5340-14-368-3581
Plug Button

143683581
075953: RNCC: 3 | RNVC: 2
075953D: RNCC: 5 | RNVC: 9

20 Feb 1981

5340-14-353-6622
Access Cover

143536622
0172190220: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-031-9808
Strap Fastener Loop

140319808
CF1A11145: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-493-8764
Mounting Bracket

144938764
3295913-2: RNCC: 3 | RNVC: 2
F300 0T 014 3495: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-303-9736
Retaining Strap

143039736
2-14764: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-340-9787
Mortise Lock Set

143409787
0852677900: RNCC: 3 | RNVC: 2
0852677900: RNCC: 5 | RNVC: 9

16 Mar 1977

5340-14-530-1301
Mounting Bracket

145301301
27566261-6: RNCC: 3 | RNVC: 2

17 May 2002

5340-14-312-1667
Rod End Clevis

143121667
GA54931: RNCC: 3 | RNVC: 2
GA54931: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-203-3793
Angle Bracket

142033793
3130S73-36-255: RNCC: 3 | RNVC: 2
3130S73-36-255: RNCC: 3 | RNVC: 2
SE3130S73-36-255: RNCC: 5 | RNVC: 2
73-36-255: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-14-412-2076
Angle Bracket

144122076
332A21-1356-33: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-452-2783
Mounting Bracket

144522783
332A58-2092-20: RNCC: 3 | RNVC: 2
F300 0T 012 7927: RNCC: 5 | RNVC: 9

8 Jan 1992

5340-14-389-9278
Strap Fastener Loop

143899278
005452013P: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-533-9077
Mounting Plate

145339077
169E396-00: RNCC: 3 | RNVC: 2

27 Feb 2003

5340-14-550-0128
Mounting Bracket

145500128
EA6M703-10-795: RNCC: 3 | RNVC: 2

24 May 2006

5340-14-314-4883
Access Cover

143144883
NO PRIMARY REF14-314-4883: RNCC: 3 | RNVC: 2
66309: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-265-1351
Loop Clamp

142651351
55218-204B237DB: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-453-2771
Mounting Bracket

144532771
DV5410-02-02: RNCC: 3 | RNVC: 2
89467775: RNCC: 5 | RNVC: 2

12 Feb 1992

5340-14-542-6442
Mounting Bracket

145426442
332A31-3192-00: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-14-553-4451
Angle Bracket

145534451
DA1N202700089: RNCC: 3 | RNVC: 2

4 Apr 2007

5340-14-473-9469
Access Cover

144739469
39252707: RNCC: 3 | RNVC: 2
39252707: RNCC: 3 | RNVC: 9

18 Jan 1995

5340-14-549-6615
Mounting Bracket

145496615
2237838260: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-14-539-5575
Bow Handle

145395575
SZ09.725.760: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-376-6668
Butt Hinge

143766668
420023W: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-487-4941
Mounting Bracket

144874941
10183263: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-526-4243
Rod End Clevis

145264243
RA1B293170535: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-467-4303
Mounting Bracket

144674303
160R742233-19: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-14-532-6982
Access Cover

145326982
80 427 240 01: RNCC: 3 | RNVC: 2

4 Dec 2002

5340-14-397-4889
Rod End Connector

143974889
005806543P: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-456-0000
Access Cover

144560000
1030910016: RNCC: 3 | RNVC: 2
1030910016: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-458-8765
Mounting Plate

144588765
45051056: RNCC: 3 | RNVC: 2

5 Nov 1992

5340-14-371-9619
Clamping Catch

143719619
8812037407: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-457-6154
Block Clamp

144576154
PM1A689304100: RNCC: 3 | RNVC: 2
PM1A689304100: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-461-2053
Protection Bellows

144612053
443481N: RNCC: 3 | RNVC: 2

2 Mar 1993

5340-14-457-3607
Mounting Bracket

144573607
45057932: RNCC: 3 | RNVC: 2
45057932: RNCC: 5 | RNVC: 9

27 Aug 1992

5340-14-537-4858
Mounting Bracket

145374858
9411ADP130: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-451-9454
Cover Strip

144519454
6511E-REP19J325X773: RNCC: 3 | RNVC: 2

12 Dec 1991

5340-14-523-0825
Access Cover

145230825
8027789E00: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-14-395-9475
Mending Plate

143959475
38165330: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-548-9423
Access Cover

145489423
82122414000: RNCC: 3 | RNVC: 2

24 Feb 2006

5340-14-554-1009
Loop Clamp

145541009
350 061: RNCC: 3 | RNVC: 2
350 061: RNCC: 3 | RNVC: 2

11 Jun 2007

5340-14-344-5839
Bumper

143445839
28621: RNCC: 3 | RNVC: 2
EBR519001: RNCC: 5 | RNVC: 2

9 Sep 1977

5340-14-525-5698
Door Holder

145255698
40P3019: RNCC: 3 | RNVC: 2
8007890X00: RNCC: 5 | RNVC: 2

14 Jun 2001

5340-14-372-2388
Locking Stay

143722388
0000662962: RNCC: 3 | RNVC: 2
0000662962: RNCC: 5 | RNVC: 9

1 Sep 1981

5340-14-551-5208
Mounting Bracket

145515208
RA1B702506151: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-459-1581
Mounting Plate

144591581
20110645: RNCC: 3 | RNVC: 2

19 Nov 1992

5340-14-553-9627
Blank Panel

145539627
82099251000: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-14-493-5133
Mounting Plate

144935133
5010099216: RNCC: 3 | RNVC: 2
F300 0T 013 3239: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-349-8883
Rim Latch

143498883
458507: RNCC: 3 | RNVC: 2
458507: RNCC: 3 | RNVC: 9

14 Jun 1978

5340-14-544-2754
Clamping Catch

145442754
0 363 01 023 0: RNCC: 3 | RNVC: 2

14 Jan 2005

5340-14-382-5018
Loop Clamp

143825018
045S03-622865K: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-320-3631
Angle Bracket

143203631
157367: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-551-2644
Pipe Hanger

145512644
RA1A704855415N1: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-425-5939
Access Cover

144255939
557413: RNCC: 3 | RNVC: 2

12 Jul 1988

5340-14-474-4187
Pawl Fastener

144744187
075057: RNCC: 3 | RNVC: 9

15 Feb 1995

5340-14-448-0496
Mounting Plate

144480496
PM1A333190016A1: RNCC: 3 | RNVC: 2
PM1A333190016A1: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-206-9146
Loop Clamp

142069146
15N14-5: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-535-1543
Utility Access Door

145351543
5000988053: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-383-3756
Access Cover

143833756
3511 191 40821: RNCC: 3 | RNVC: 2
3511 191 40821: RNCC: 5 | RNVC: 2
3511-191-40821: RNCC: 5 | RNVC: 2

11 Apr 1983

5340-14-472-7604
Plug Button

144727604
332A72-1651-00: RNCC: 3 | RNVC: 2

9 Nov 1994

5340-14-462-8934
Plug Button

144628934
2 3S: RNCC: 3 | RNVC: 2
GD160-2 3S: RNCC: 5 | RNVC: 2

5 May 1993

5340-14-549-8219
Utility Access Door

145498219
2092686-001: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-533-6498
Angle Bracket

145336498
355A68-5237-02: RNCC: 3 | RNVC: 2

17 Feb 2003

5340-14-482-3709
Access Cover

144823709
312-02380-016: RNCC: 3 | RNVC: 2

10 Jul 1996

5340-14-358-7136
Rod End Clevis

143587136
9401CRL102-00-14: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-528-8048
Access Cover

145288048
216-01585-000: RNCC: 3 | RNVC: 2
216-01585-000: RNCC: 5 | RNVC: 2

15 Feb 2002

5340-14-536-9757
Utility Access Door

145369757
231050-010: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-455-1322
Rod End Clevis

144551322
ST159-2M753-27P28: RNCC: 3 | RNVC: 2

1 May 1992

5340-14-396-6565
Angle Bracket

143966565
785-137: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-349-4337
Access Cover

143494337
M5DP220-44: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-369-4027
Friction Catch

143694027
16-7-3423: RNCC: 3 | RNVC: 2
Z00.N7468671623: RNCC: 5 | RNVC: 2
M1NPM1F: RNCC: 5 | RNVC: 2
16-7-34-23: RNCC: 5 | RNVC: 2

17 Apr 1981

5340-14-290-2346
Retaining Strap

142902346
330A75-9615-00: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-457-5030
Clamping Catch

144575030
GP.16-IB: RNCC: 3 | RNVC: 2
GP16IB: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-514-4774
Shelf Bracket

145144774
IF-192-0546: RNCC: 3 | RNVC: 9
02022-10-00-013: RNCC: 5 | RNVC: 2

26 May 1999

5340-14-451-3713
Mounting Plate

144513713
362/048-4/0000: RNCC: 3 | RNVC: 9
RAR3485: RNCC: 5 | RNVC: 2

15 Nov 1991

5340-14-308-8743
Utility Access Door

143088743
6511-02044: RNCC: 3 | RNVC: 2
6511-02044: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-217-8866
Support Hook

142178866
3130S72-13-168: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-360-3686
Access Door Hinge

143603686
NO PRIMARY REF14-360-3686: RNCC: 3 | RNVC: 2
34278407: RNCC: 5 | RNVC: 9
9934278407: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-303-1182
Rod End Clevis

143031182
M3B216-54-810: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-542-6588
Retaining Band

145426588
355A75-1216-00: RNCC: 3 | RNVC: 2

23 Jul 2004

5340-14-388-9560
Rod End Clevis

143889560
ST159-2M756P116: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-338-3629
Retaining Strap

143383629
011-2462: RNCC: 3 | RNVC: 2
11-2462: RNCC: 5 | RNVC: 2

6 Nov 1976

5340-14-519-3133
Access Cover

145193133
955120-203DGJ: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-431-5793
Mounting Plate

144315793
G990264-06: RNCC: 3 | RNVC: 2

26 Apr 1989

5340-14-348-5183
Retaining Strap

143485183
291102-10: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-558-6155
Utility Resilient Mount

145586155
82373125000: RNCC: 3 | RNVC: 2

16 Oct 2008

5340-14-455-6905
Protection Bellows

144556905
5641: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-042-4717
Bridge Clamp

140424717
16176457: RNCC: 3 | RNVC: 2
16176457: RNCC: 5 | RNVC: 2
16176457: RNCC: 5 | RNVC: 9

19 Jan 1978

5340-14-446-7151
Mounting Plate

144467151
39383034: RNCC: 3 | RNVC: 2
39383034: RNCC: 5 | RNVC: 9

9 Apr 1991

5340-14-422-0213
Webbing Strap

144220213
ST406M75G52: RNCC: 3 | RNVC: 2

17 Feb 1988

5340-14-540-2998
Bumper

145402998
039990302: RNCC: 3 | RNVC: 2

18 Mar 2004

5340-14-451-5115
Mounting Bracket

144515115
541321: RNCC: 3 | RNVC: 2

21 Nov 1991

5340-14-403-3323
Loop Clamp

144033323
206306: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-378-9040
Retaining Strap

143789040
0035655018: RNCC: 3 | RNVC: 2
0035655018: RNCC: 5 | RNVC: 9
286590: RNCC: 5 | RNVC: 9
35655018: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-14-434-4525
Block Clamp

144344525
PM1A239137001: RNCC: 3 | RNVC: 2
PM1A239137001: RNCC: 5 | RNVC: 2

20 Sep 1989

5340-14-490-6334
Mounting Bracket

144906334
T206068492: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-379-4031
Loop Clamp

143794031
1106214011: RNCC: 3 | RNVC: 2
62140: RNCC: 5 | RNVC: 2

1 Oct 1982

5340-14-534-3647
Runner

145343647
711628: RNCC: 3 | RNVC: 2

20 Mar 2003

5340-14-425-8101
Loop Clamp

144258101
4281311620: RNCC: 3 | RNVC: 2
B28DG16: RNCC: 5 | RNVC: 2

21 Jul 1988

5340-14-533-3183
Handwheel

145333183
VOLBK160: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-269-6590
Angle Bracket

142696590
70883170: RNCC: 3 | RNVC: 2
70883170: RNCC: 5 | RNVC: 9
883170: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-408-4842
Retaining Strap

144084842
30318141GAA: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-349-2378
Butt Hinge

143492378
193141: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-530-8214
Mounting Bracket

145308214
760770: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-14-455-3745
Mounting Bracket

144553745
1060233: RNCC: 3 | RNVC: 2
5044665: RNCC: 5 | RNVC: 9
1060233: RNCC: 5 | RNVC: 9

21 May 1992

5340-14-533-9945
Mounting Bracket

145339945
710670: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-540-9174
Mounting Plate

145409174
0SYA24-665353P: RNCC: 3 | RNVC: 2
0665353P00: RNCC: 5 | RNVC: 2

5 May 2004

5340-14-527-9933
Angle Bracket

145279933
MB3448F00: RNCC: 3 | RNVC: 2

7 Dec 2001

5340-14-420-1793
Bow Handle

144201793
20859686: RNCC: 3 | RNVC: 2
20859686: RNCC: 3 | RNVC: 9

24 Nov 1987

5340-14-546-7621
Mounting Bracket

145467621
RA1M703756741A2N2: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-14-545-3986
Pipe Hanger

145453986
DA2C201740651: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-360-8192
Angle Bracket

143608192
1101576: RNCC: 3 | RNVC: 9

19 Dec 1979

5340-14-530-3607
Lock Bolt

145303607
FF41A1: RNCC: 3 | RNVC: 2

5 Jun 2002

5340-14-445-2512
Retaining Strap

144452512
233535S: RNCC: 3 | RNVC: 2

6 Feb 1991

5340-14-520-1731
Metal Grille

145201731
45282640: RNCC: 3 | RNVC: 9

17 May 2000

5340-14-416-6732
Loop Clamp

144166732
005974990S: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-383-3987
Retaining Strap

143833987
386437: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-507-6838
Retaining Strap

145076838
10335688: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-411-0814
Mounting Plate

144110814
232639: RNCC: 3 | RNVC: 2
MAF0000001464: RNCC: 6 | RNVC: 9

6 Aug 1986

5340-14-468-1778
Loop Clamp

144681778
0120790001: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-550-4844
Mounting Bracket

145504844
RA1A702726029N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-423-0647
Runner

144230647
39530765: RNCC: 3 | RNVC: 2
39530765: RNCC: 5 | RNVC: 9

31 Mar 1988

5340-14-425-4794
Control Rod

144254794
0010216337A125: RNCC: 3 | RNVC: 2
1-125-216: RNCC: 3 | RNVC: 9

6 Jul 1988

5340-14-489-6243
Cover Strip

144896243
332A61-3847-20: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-435-3766
Swivel Caster

144353766
HP1BD125-73B02: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-375-5278
Butt Hinge

143755278
366A21-1161-01: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-218-0718
Angle Bracket

142180718
NO PRIMARY REF14-218-0718: RNCC: 3 | RNVC: 2
87079: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-520-3118
Mounting Bracket

145203118
23194731-2: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-262-5572
Rod End Connector

142625572
109155: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-348-5185
Retaining Strap

143485185
291062-6: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-450-8830
Rod End Connector

144508830
PM1A297100052: RNCC: 3 | RNVC: 2
PM1A297100052: RNCC: 5 | RNVC: 2

23 Oct 1991

5340-14-339-9111
Rod End Connector

143399111
483494: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-502-3015
Rim Lock Set

145023015
MECANIS 1200: RNCC: 3 | RNVC: 2
50329-1: RNCC: 5 | RNVC: 2

9 Dec 1997

5340-14-387-3478
Flush Lock

143873478
F0A9554B2: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-14-551-9655
Mounting Bracket

145519655
212872-1: RNCC: 3 | RNVC: 2

14 Nov 2006

5340-14-456-4430
Angle Bracket

144564430
T606AC21: RNCC: 3 | RNVC: 2
5045927: RNCC: 5 | RNVC: 9
T606AC21: RNCC: 5 | RNVC: 9

2 Jul 1992

5340-14-532-2091
Access Cover

145322091
F1359658: RNCC: 3 | RNVC: 2

16 Oct 2002

5340-14-212-6670
Strap Fastener Loop

142126670
2298: RNCC: 3 | RNVC: 2
AP28: RNCC: 5 | RNVC: 2
210215: RNCC: 5 | RNVC: 2
2298A: RNCC: 5 | RNVC: 2
2298F: RNCC: 5 | RNVC: 2
210215: RNCC: 5 | RNVC: 9
2298: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-448-0337
Angle Bracket

144480337
PM1A233280064: RNCC: 3 | RNVC: 2
PM1A233280064: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-521-5683
Retaining Bail

145215683
160-888224: RNCC: 3 | RNVC: 2

23 Aug 2000

5340-14-413-9054
Retaining Strap

144139054
189931: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-381-5348
Retaining Strap

143815348
091514W: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-488-4121
Expansion Plug

144884121
40968-0: RNCC: 3 | RNVC: 2

7 May 1997

5340-14-452-7260
Mounting Bracket

144527260
ST406M61P51-8: RNCC: 3 | RNVC: 2

15 Jan 1992

5340-14-520-3102
Mounting Plate

145203102
23194468-4: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-487-4975
Mounting Bracket

144874975
25649346: RNCC: 3 | RNVC: 2
2-564934-6: RNCC: 5 | RNVC: 2

10 Apr 1997

5340-14-447-6319
Anchor Strap

144476319
5000920638: RNCC: 3 | RNVC: 2

29 May 1991

5340-14-545-8564
Mounting Bracket

145458564
732233: RNCC: 3 | RNVC: 2

21 May 2005

5340-14-355-7400
Angle Bracket

143557400
A11A224110009: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-284-5495
Access Cover

142845495
0249152000: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-436-4839
Quick Release Pin

144364839
01BP10-050: RNCC: 3 | RNVC: 9

3 Jan 1990

5340-14-253-3378
Access Cover

142533378
24009000200: RNCC: 3 | RNVC: 2
9J2: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-389-9242
Snap Hook

143899242
005301013M: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-463-3312
Mounting Bracket

144633312
0000033001: RNCC: 3 | RNVC: 2
330-01: RNCC: 5 | RNVC: 2

9 Jun 1993

5340-14-430-9471
Pipe Hanger

144309471
G230075-11: RNCC: 3 | RNVC: 2

29 Mar 1989

Load More Results