What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 41 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 41 of 446

5340-14-235-1371
Expansion Plug

142351371
NO PRIMARY REF14-235-1371: RNCC: 3 | RNVC: 2
665: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-407-2857
Access Cover

144072857
PE49043-1: RNCC: 3 | RNVC: 2
PE49043-1P: RNCC: 5 | RNVC: 9

12 Feb 1986

5340-14-467-0455
Mounting Plate

144670455
TB30-81010-113: RNCC: 3 | RNVC: 2

16 Dec 1993

5340-14-301-0112
Rod End Clevis

143010112
121E57-548-30-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-320-8488
Loop Clamp

143208488
M3E700-60-820: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-347-4153
Butt Hinge

143474153
MS7524-5A850: RNCC: 3 | RNVC: 2
MS7524-5A850: RNCC: 5 | RNVC: 2
MS7524-5A850: RNCC: 5 | RNVC: 9

1 Mar 1978

5340-14-271-5142
Rod End Connector

142715142
262-10-22572-15: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-531-9550
Mounting Plate

145319550
MAT291-0584F6: RNCC: 3 | RNVC: 2

2 Oct 2002

5340-14-483-8015
Loop Clamp

144838015
6-0010-409: RNCC: 3 | RNVC: 2
1110777Y00: RNCC: 5 | RNVC: 2

3 Oct 1996

5340-14-461-2219
Pipe Hanger

144612219
054363-853-921: RNCC: 3 | RNVC: 9
7703079349: RNCC: 5 | RNVC: 2
054363-853921: RNCC: 5 | RNVC: 9
054363853921: RNCC: 5 | RNVC: 9

3 Mar 1993

5340-14-526-9446
Bow Handle

145269446
00-725-018: RNCC: 3 | RNVC: 2
SZ00.725.018: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-362-7576
Mending Plate

143627576
596-52-03-9: RNCC: 3 | RNVC: 2

19 Mar 1980

5340-14-226-4427
Corner Brace

142264427
NO PRIMARY REF14-226-4427: RNCC: 3 | RNVC: 2
V10278-5: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-539-6474
Rod End Clevis

145396474
21227591-00: RNCC: 3 | RNVC: 2
21227591-9: RNCC: 5 | RNVC: 2

28 Jan 2004

5340-14-542-5935
Access Cover

145425935
78740A25-40-60: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-14-288-9708
Rod End Clevis

142889708
A10-76-291-03-0: RNCC: 3 | RNVC: 2
A10-76-291-03-0: RNCC: 3 | RNVC: 2
A10-76-291-03-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-322-1253
Turnbuckle Body

143221253
121E71-322-03-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-246-3806
Retaining Strap

142463806
NO PRIMARY REF14-246-3806: RNCC: 3 | RNVC: 2
S274399: RNCC: 5 | RNVC: 2
S274399: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-533-3189
Mounting Bracket

145333189
888-444-802-0: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-324-4759
Access Cover

143244759
NO PRIMARY REF14-324-4759: RNCC: 3 | RNVC: 2
75-174-11-35: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-483-9390
Webbing Strap

144839390
01809-2-01215: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-14-347-9518
Angle Bracket

143479518
7-016-034: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-244-4860
Loop Clamp

142444860
370430: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-411-2578
Loop Clamp

144112578
ASNA0021-25SE08: RNCC: 3 | RNVC: 2
A0021-25SE08: RNCC: 5 | RNVC: 2

6 Aug 1986

5340-14-415-5284
Loop Clamp

144155284
51111905028: RNCC: 3 | RNVC: 2
25P28: RNCC: 5 | RNVC: 2

18 May 1987

5340-14-476-0480
Cushioning Pad

144760480
5000502702: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-533-6647
Mounting Bracket

145336647
F1264449: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-14-336-7194
Angle Bracket

143367194
16396667: RNCC: 3 | RNVC: 2
16396667: RNCC: 5 | RNVC: 9

7 Oct 1976

5340-14-456-2921
Mounting Bracket

144562921
16930982: RNCC: 3 | RNVC: 2

25 Jun 1992

5340-14-432-6460
Mounting Plate

144326460
3H003696-00: RNCC: 3 | RNVC: 9

19 Jun 1989

5340-14-436-3254
Angle Bracket

144363254
4168656: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-14-262-4822
Bumper

142624822
321A79-0084-20: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-540-7111
Access Cover

145407111
06550002: RNCC: 3 | RNVC: 2
A08050-502: RNCC: 5 | RNVC: 2
4848ZG8613180854: RNCC: 6 | RNVC: 9

21 Apr 2004

5340-14-533-8323
Angle Bracket

145338323
46945717: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-453-2652
Retaining Strap

144532652
642132: RNCC: 3 | RNVC: 2

12 Feb 1992

5340-14-276-2216
Loop Clamp

142762216
A49172: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-376-6161
Loop Clamp

143766161
PP39292: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-532-3604
Mounting Bracket

145323604
RA1M216900120A3: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-465-1660
Blank Panel

144651660
365A61-8217-20: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-549-9443
Loop Clamp

145499443
01200012010: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-455-7800
Mounting Plate

144557800
5000362572: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-287-8820
Retaining Strap

142878820
704089: RNCC: 3 | RNVC: 9
76867: RNCC: 5 | RNVC: 9
062076867: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-394-5473
Mounting Bracket

143945473
355A58-0517-2701: RNCC: 3 | RNVC: 2

28 Aug 1984

5340-14-490-7278
Loop Clamp

144907278
CS1R: RNCC: 3 | RNVC: 2
304 941 043: RNCC: 6 | RNVC: 9
F300 0T 000 2949: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-324-5941
Angle Bracket

143245941
M118599: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-520-2553
Mounting Plate

145202553
201292REP5: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-533-5023
Mounting Plate

145335023
39406742: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-501-2973
Mounting Bracket

145012973
707.001.011: RNCC: 3 | RNVC: 2
707-001-011: RNCC: 3 | RNVC: 2
F300 0T 025 3382: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-511-5615
Detent Plunger

145115615
327060-B48643: RNCC: 3 | RNVC: 2

5 Jan 1999

5340-14-488-6720
Bumper

144886720
3BT02118AAAA: RNCC: 3 | RNVC: 2
3BT02118AAAA: RNCC: 5 | RNVC: 9

28 May 1997

5340-14-487-5543
Angle Bracket

144875543
78721DH34-1: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-485-9972
Mounting Bracket

144859972
10306873: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-551-3490
Angle Bracket

145513490
RA1M703336139N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-520-0948
Retaining Bail

145200948
RA1M701340103: RNCC: 3 | RNVC: 2

10 May 2000

5340-14-493-5632
Mounting Bracket

144935632
1021145: RNCC: 3 | RNVC: 2
F300 0T 013 5709: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-551-3375
Pipe Hanger

145513375
RA1A702206169: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-343-1852
Butt Hinge

143431852
187393: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-282-1510
Pipe Hanger

142821510
271632: RNCC: 3 | RNVC: 2
271632: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-515-5157
Metal Grille

145155157
9202738: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-551-2544
Angle Bracket

145512544
RA1B702606241A1N1: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-338-4307
Rod End Clevis

143384307
330A61-2429-20: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-454-8290
Runner

144548290
3169928: RNCC: 3 | RNVC: 2

24 Apr 1992

5340-14-502-7260
Mounting Bracket

145027260
1196737: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-349-7504
Access Cover

143497504
053M21-532148T: RNCC: 3 | RNVC: 2
0532148T00: RNCC: 5 | RNVC: 2

14 Jun 1978

5340-14-504-1197
Snap Hook

145041197
121152REP26-27-33-34ET35: RNCC: 3 | RNVC: 2

9 Feb 1998

5340-14-397-6739
Mounting Plate

143976739
421739: RNCC: 3 | RNVC: 2
421739: RNCC: 5 | RNVC: 2
421739: RNCC: 5 | RNVC: 9
85-692-7845: RNCC: 6 | RNVC: 9

14 Dec 1984

5340-14-348-1072
Rod End Clevis

143481072
C57455-20: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-323-3781
Handwheel

143233781
GSM137-018F10REP1: RNCC: 3 | RNVC: 2
000MA060R1F10: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-445-8717
Plug Button

144458717
1053-02: RNCC: 3 | RNVC: 2

27 Feb 1991

5340-14-480-6873
Webbing Strap

144806873
FM340G01PL6/6REP21-22: RNCC: 3 | RNVC: 2

22 Mar 1996

5340-14-442-5056
Loop Clamp

144425056
RSGU1-16/20-W1: RNCC: 3 | RNVC: 2
91713862: RNCC: 5 | RNVC: 2
RSGU1100-16-20: RNCC: 5 | RNVC: 2

17 Oct 1990

5340-14-264-1718
Loop Clamp

142641718
55218-304D507ADL: RNCC: 3 | RNVC: 2
55218-104N: RNCC: 5 | RNVC: 2
55218-304-001ADL: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-460-3408
Angle Bracket

144603408
T602AA12: RNCC: 3 | RNVC: 2
T602AA12: RNCC: 5 | RNVC: 9
5046431: RNCC: 5 | RNVC: 9

21 Jan 1993

5340-14-441-8047
Mounting Bracket

144418047
16-020-010: RNCC: 3 | RNVC: 2

19 Sep 1990

5340-14-435-4270
Bumper

144354270
350A21-1388-22: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-516-7303
Access Cover

145167303
8110005780: RNCC: 3 | RNVC: 2
BL-180A: RNCC: 6 | RNVC: 9

13 Oct 1999

5340-14-458-7786
Mounting Bracket

144587786
MN03/09-32: RNCC: 3 | RNVC: 2

3 Nov 1992

5340-14-031-6947
Loop Clamp

140316947
23000801: RNCC: 3 | RNVC: 2
382UTB080: RNCC: 5 | RNVC: 2

14 Jun 1980

5340-14-452-0301
Rim Lock Set

144520301
NO PRIMARY REF14-452-0301: RNCC: 3 | RNVC: 2
1085-92: RNCC: 5 | RNVC: 9

18 Dec 1991

5340-14-319-2745
Access Cover

143192745
413-02271-000: RNCC: 3 | RNVC: 2
413-02271-000: RNCC: 5 | RNVC: 2
413-2271: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-258-0736
Control Rod

142580736
F107937: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-502-3918
Mounting Bracket

145023918
45677823: RNCC: 3 | RNVC: 9

9 Dec 1997

5340-14-553-6877
Mounting Bracket

145536877
82182656000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-521-3388
Handle Grip

145213388
10354994: RNCC: 3 | RNVC: 2

20 Jul 2000

5340-14-364-0436
Loop Clamp

143640436
21S0600601: RNCC: 3 | RNVC: 2
21S0600601: RNCC: 5 | RNVC: 2

7 Aug 1980

5340-14-394-6458
Runner

143946458
79110190: RNCC: 3 | RNVC: 2
79110190: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-445-4936
Mounting Bracket

144454936
ST400S14P12-12: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-532-4953
Access Cover

145324953
53-11-30: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-14-514-4798
Access Cover

145144798
45219104: RNCC: 3 | RNVC: 2
45219104: RNCC: 5 | RNVC: 2
5010579472: RNCC: 5 | RNVC: 2
IF-192-0295: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-438-9676
Mounting Bracket

144389676
330A98-3329-20: RNCC: 3 | RNVC: 2

11 Apr 1990

5340-14-340-9402
Access Cover

143409402
NO PRIMARY REF14-340-9402: RNCC: 3 | RNVC: 2
RT7892: RNCC: 5 | RNVC: 9

14 Feb 1977

5340-14-478-2472
Eye Hook

144782472
120E099-00: RNCC: 3 | RNVC: 2
120E099-00: RNCC: 5 | RNVC: 9

18 Oct 1995

5340-14-439-8286
Mounting Bracket

144398286
332A57-2172-00: RNCC: 3 | RNVC: 2

23 May 1990

5340-14-361-9236
Bumper

143619236
501-990-932-0: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-378-5150
Access Cover

143785150
2043-19: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-469-2227
Mounting Plate

144692227
68162-10: RNCC: 3 | RNVC: 2

13 Apr 1994

5340-14-477-7354
Lock-Release Lever

144777354
1405-134-000A: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-14-522-9065
Mounting Plate

145229065
500-75-00-3: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-14-266-5104
Retaining Strap

142665104
S57-21Z: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-541-3134
Bail Handle

145413134
PR.312-IB-MODIFIEE: RNCC: 3 | RNVC: 2

27 May 2004

5340-14-366-5817
Angle Bracket

143665817
055B54-581030N: RNCC: 3 | RNVC: 2
0581030N00: RNCC: 5 | RNVC: 2

20 Nov 1980

5340-14-377-6288
Pipe Hanger

143776288
366A61-2045-0001: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-485-6326
Anchor Strap

144856326
Z5123410: RNCC: 3 | RNVC: 2
P51234-10Z: RNCC: 5 | RNVC: 2
Z51234-10: RNCC: 5 | RNVC: 2

6 Feb 1997

5340-14-308-9721
Retaining Strap

143089721
620-855-725-0: RNCC: 3 | RNVC: 2
33105: RNCC: 3 | RNVC: 2
620-850-725-0: RNCC: 5 | RNVC: 2
620-850-725-0: RNCC: 5 | RNVC: 2
620-855-725-0: RNCC: 5 | RNVC: 2
33105: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-469-9981
Mounting Plate

144699981
4656537A: RNCC: 3 | RNVC: 2
4656537A: RNCC: 3 | RNVC: 9
SK-261A: RNCC: 6 | RNVC: 9

25 May 1994

5340-14-337-3487
Rigid Caster

143373487
501-730-068-0: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-297-1393
Pipe Hanger

142971393
MY20515-1707: RNCC: 3 | RNVC: 2
MY20-515-17-07: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-505-9079
Mounting Bracket

145059079
399-001-321-0: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-503-5058
Snap Hook

145035058
695 720 467 014: RNCC: 3 | RNVC: 2
902-PBS-009-B: RNCC: 3 | RNVC: 2
SYQ6016: RNCC: 5 | RNVC: 2

16 Jan 1998

5340-14-562-7366
Utility Access Door

145627366
POOT R312: RNCC: 3 | RNVC: 2

18 Nov 2009

5340-14-541-6816
Mounting Plate

145416816
T716A2001319: RNCC: 3 | RNVC: 2

17 Jun 2004

5340-14-403-4966
Anchor Strap

144034966
3673601: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-545-6459
Mounting Plate

145456459
27180274-8: RNCC: 3 | RNVC: 2

26 Apr 2005

5340-14-464-8290
Mortise Lock Set

144648290
484A-2-56N: RNCC: 3 | RNVC: 2

1 Sep 1993

5340-14-320-6307
Strap Fastener Loop

143206307
001684221P: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-413-0945
Rod End Connector

144130945
10124411: RNCC: 3 | RNVC: 9
10124411: RNCC: 5 | RNVC: 2
010124411: RNCC: 5 | RNVC: 9

26 Nov 1986

5340-14-337-0317
Rim Lock

143370317
1247-2: RNCC: 3 | RNVC: 2
501358: RNCC: 3 | RNVC: 2
1247-2: RNCC: 5 | RNVC: 9

7 Oct 1976

5340-14-323-2019
Mending Plate

143232019
1-7011: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-355-2877
Casement Fastener

143552877
SLKV34X220: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-320-5394
Quick Release Pin

143205394
80706: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-551-5199
Butt Hinge

145515199
730010S100-24A: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-523-8641
Mounting Bracket

145238641
45710510: RNCC: 3 | RNVC: 2

8 Feb 2001

5340-14-450-8281
Mounting Plate

144508281
39071359: RNCC: 3 | RNVC: 2

23 Oct 1991

5340-14-535-5062
Cover Strip

145355062
SZ10.250.881: RNCC: 3 | RNVC: 2
10-250-881: RNCC: 3 | RNVC: 2

31 May 2003

5340-14-335-3004
Angle Bracket

143353004
187356: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-255-5477
Loop Clamp

142555477
70246222: RNCC: 3 | RNVC: 2
246222: RNCC: 5 | RNVC: 9
70246222: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-474-9322
Mounting Bracket

144749322
20867864: RNCC: 3 | RNVC: 2

10 Mar 1995

5340-14-452-9877
Mounting Bracket

144529877
127916: RNCC: 3 | RNVC: 2

29 Jan 1992

5340-14-357-4845
Retaining Strap

143574845
0160750010: RNCC: 3 | RNVC: 2
0160750010: RNCC: 5 | RNVC: 2

7 Jun 1979

5340-14-371-4181
Bumper

143714181
104013401: RNCC: 3 | RNVC: 2
104013401: RNCC: 5 | RNVC: 2
F300 0T 001 8713: RNCC: 6 | RNVC: 9

5 Aug 1981

5340-14-515-3173
Bow Handle

145153173
0009910306: RNCC: 3 | RNVC: 2
9910306: RNCC: 5 | RNVC: 1
0009910306: RNCC: 5 | RNVC: 2

13 Jul 1999

5340-14-550-5258
Cover Strip

145505258
DA1S230323500: RNCC: 3 | RNVC: 2

22 Jun 2006

5340-14-461-2071
Mounting Bracket

144612071
405058: RNCC: 3 | RNVC: 2
405058: RNCC: 5 | RNVC: 9

2 Mar 1993

5340-14-550-2344
Mounting Bracket

145502344
82128919000: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-14-441-0086
Mounting Plate

144410086
06443977: RNCC: 3 | RNVC: 2

9 Aug 1990

5340-14-434-0192
Threaded Rod End

144340192
RP981318: RNCC: 3 | RNVC: 2

29 Aug 1989

5340-14-379-0133
Mending Plate

143790133
16799837: RNCC: 3 | RNVC: 2
16799837: RNCC: 3 | RNVC: 9

6 Sep 1982

5340-14-364-7091
Retaining Strap

143647091
206644: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-14-539-7676
Mounting Bracket

145397676
375300K: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-14-392-7527
Angle Bracket

143927527
5000498474: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-441-3867
Block Fairlead

144413867
DA1D202210430: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-517-5868
Angle Bracket

145175868
RA1M701206515N1: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-502-5094
Mounting Bracket

145025094
5000540725: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-380-1770
Angle Bracket

143801770
2206-431B460: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-471-1337
Angle Bracket

144711337
P600012: RNCC: 3 | RNVC: 2
600012: RNCC: 5 | RNVC: 9

27 Jul 1994

5340-14-546-6025
Retaining Strap

145466025
RPL741200024B1: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-14-545-2621
Mounting Bracket

145452621
S214A1011000: RNCC: 3 | RNVC: 2

30 Mar 2005

5340-14-527-3796
Access Cover

145273796
H145051W: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-428-5549
Bow Handle

144285549
MKL0460301: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-236-0942
Pipe Hanger

142360942
160-61460-23: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-505-6521
Mounting Bracket

145056521
E25001000048: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-547-5621
Angle Bracket

145475621
RA1M704836091: RNCC: 3 | RNVC: 2

16 Oct 2005

5340-14-250-0895
Loop Clamp

142500895
51200002013: RNCC: 3 | RNVC: 2
9562810280: RNCC: 5 | RNVC: 2
10N13: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-443-9555
Threaded Rod End

144439555
C103308: RNCC: 3 | RNVC: 2
C103308: RNCC: 6 | RNVC: 9

17 Dec 1990

5340-14-321-0115
Access Cover

143210115
15615455: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-357-9029
Retaining Clip

143579029
0428463200: RNCC: 3 | RNVC: 2
0428463200: RNCC: 5 | RNVC: 9

20 Jul 1979

5340-14-433-5376
Runner

144335376
8164573: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-508-2840
Caster Frame

145082840
8011811F00: RNCC: 3 | RNVC: 2

2 Sep 1998

5340-14-360-2178
Bumper

143602178
16293529: RNCC: 3 | RNVC: 2
16293529: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-546-0485
Mounting Bracket

145460485
10711665000: RNCC: 3 | RNVC: 2

8 Jun 2005

5340-14-488-7278
Access Cover

144887278
2253485J00: RNCC: 3 | RNVC: 2
1004052W00: RNCC: 5 | RNVC: 2

28 May 1997

5340-14-576-0474
Utility Access Door

145760474
82667761000: RNCC: 3 | RNVC: 2

27 May 2013

5340-14-546-4234
Access Cover

145464234
00234R0500: RNCC: 3 | RNVC: 2

4 Jul 2005

5340-14-493-6827
Mounting Plate

144936827
443 777 IND.1: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-497-4119
Mounting Bracket

144974119
1021000: RNCC: 3 | RNVC: 2
1021000: RNCC: 5 | RNVC: 2
F300 0T 023 1415: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-484-8179
Mounting Bracket

144848179
332P65-1242-00: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-551-0225
Lock Spindle

145510225
93781: RNCC: 3 | RNVC: 2

22 Aug 2006

5340-14-473-7465
Mounting Bracket

144737465
46062533: RNCC: 3 | RNVC: 2
46062533: RNCC: 5 | RNVC: 9

11 Jan 1995

5340-14-489-6552
Blank Panel

144896552
332A25-1030-73: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-454-8895
Mounting Bracket

144548895
5000678161: RNCC: 3 | RNVC: 2
0000158153: RNCC: 5 | RNVC: 2

24 Apr 1992

5340-14-501-2215
Access Cover

145012215
426662-440.20.11.11: RNCC: 3 | RNVC: 2
426662-440-20-11-11: RNCC: 3 | RNVC: 2
F300 0T 025 2620: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-310-2346
Access Cover

143102346
NO PRIMARY REF14-310-2346: RNCC: 3 | RNVC: 2
TC001-00-02: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-409-0264
Angle Bracket

144090264
D10-44952: RNCC: 3 | RNVC: 2
D10-44952: RNCC: 5 | RNVC: 9

16 Apr 1986

5340-14-572-8393
Utility Resilient Mount

145728393
E1N-3454-53: RNCC: 3 | RNVC: 2

9 Aug 2012

5340-14-494-8843
Lock-Release Lever

144948843
ERX.78 B-M10: RNCC: 3 | RNVC: 2
5419845: RNCC: 5 | RNVC: 2
233156-C1: RNCC: 5 | RNVC: 2
F300 0T 018 0389: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-246-3805
Retaining Strap

142463805
NO PRIMARY REF14-246-3805: RNCC: 3 | RNVC: 2
S274398: RNCC: 5 | RNVC: 2
S274-398C: RNCC: 5 | RNVC: 9
85-668-3530: RNCC: 6 | RNVC: 9

1 Jan 1968

5340-14-312-7970
Control Rod

143127970
GSM522-012F5: RNCC: 3 | RNVC: 2
301MA200REP1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-364-8944
Pipe Hanger

143648944
321A75-0152-21: RNCC: 3 | RNVC: 2
85-691-0535: RNCC: 6 | RNVC: 9

2 Sep 1980

5340-14-474-1930
Utility Access Door

144741930
3511 192 37551: RNCC: 3 | RNVC: 2
3511-192-37551: RNCC: 5 | RNVC: 2

1 Feb 1995

5340-14-010-0179
Cover Strip

140100179
3130S25-10-022-1: RNCC: 3 | RNVC: 2

1 Jan 1961

5340-14-533-8982
Access Cover

145338982
08-704-230: RNCC: 3 | RNVC: 2
SZ08.704.230: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-517-7123
Access Cover

145177123
6910-21: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-454-5357
Rod End Connector

144545357
2085-05-015: RNCC: 3 | RNVC: 2
89411698: RNCC: 5 | RNVC: 9

2 Apr 1992

5340-14-404-9043
Retaining Strap

144049043
61-2-245: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-428-7468
Access Cover

144287468
SP12-65079: RNCC: 3 | RNVC: 2

16 Dec 1988

5340-14-231-5962
Retaining Band

142315962
964S: RNCC: 3 | RNVC: 9
1530P: RNCC: 5 | RNVC: 9
964: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-376-3212
Retaining Strap

143763212
2-23809: RNCC: 3 | RNVC: 2

30 Mar 1982

5340-14-458-6991
Mounting Bracket

144586991
39957669: RNCC: 3 | RNVC: 9

29 Oct 1992

5340-14-397-5672
Rod End Clevis

143975672
0000464927: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-300-6111
Retaining Strap

143006111
53313-3: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-310-2309
Access Cover

143102309
77617UE12Z1-ANY: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-540-5610
Access Cover

145405610
50108382: RNCC: 3 | RNVC: 2

6 Apr 2004

5340-14-482-7213
Mortise Latch

144827213
1099501M00: RNCC: 3 | RNVC: 2

25 Jul 1996

5340-14-357-8077
Fusible Plug

143578077
9: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-14-445-9652
Loop Clamp

144459652
1040860011: RNCC: 3 | RNVC: 2
1040860011: RNCC: 5 | RNVC: 2

27 Feb 1991

5340-14-448-5926
Angle Bracket

144485926
TS89306-1: RNCC: 3 | RNVC: 2

3 Jul 1991

5340-14-464-0782
Runner

144640782
84013235-3: RNCC: 3 | RNVC: 2

15 Jul 1993

5340-14-457-2737
Mounting Plate

144572737
38757764: RNCC: 3 | RNVC: 2
38757764: RNCC: 5 | RNVC: 9

20 Aug 1992

5340-14-468-3649
Access Cover

144683649
1025547D01: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-14-350-1251
Bail Handle

143501251
16611802: RNCC: 3 | RNVC: 2
16611802: RNCC: 3 | RNVC: 9

14 Jun 1978

5340-14-396-5393
Retaining Strap

143965393
222316: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-470-1000
Mending Plate

144701000
202925: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-14-422-2913
Mounting Plate

144222913
TS75732-1: RNCC: 3 | RNVC: 2

24 Feb 1988

5340-14-218-5867
Loop Clamp

142185867
694000-3: RNCC: 3 | RNVC: 2
694000-3: RNCC: 5 | RNVC: 2
694000-3: RNCC: 5 | RNVC: 9

10 Sep 1997

5340-14-502-6876
Access Cover

145026876
1017572: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-381-1466
Rod End Clevis

143811466
BBZ0428: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-285-5994
Angle Bracket

142855994
12504494: RNCC: 3 | RNVC: 2
12504494: RNCC: 3 | RNVC: 9

1 Jan 1972

5340-14-360-1626
Angle Bracket

143601626
A11A221176290: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-342-4559
Retaining Strap

143424559
ST400S60P93: RNCC: 3 | RNVC: 2

16 May 1977

5340-14-459-7292
Cover Strip

144597292
LN321022REP5BJAG3: RNCC: 3 | RNVC: 2
RAB0163: RNCC: 5 | RNVC: 2

15 Dec 1992

5340-14-207-8826
Rod End Clevis

142078826
KF295C: RNCC: 3 | RNVC: 2
3114114: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-314-3431
Angle Bracket

143143431
157059: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-454-2338
Anchor Strap

144542338
70899T210603: RNCC: 3 | RNVC: 2
145179: RNCC: 5 | RNVC: 2
5044932: RNCC: 5 | RNVC: 9

26 Mar 1992

5340-14-479-1233
Anchor Strap

144791233
641442: RNCC: 3 | RNVC: 2
641442: RNCC: 5 | RNVC: 9

13 Dec 1995

5340-14-386-1237
Angle Bracket

143861237
399140: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-488-4083
Bumper

144884083
100520-18G: RNCC: 3 | RNVC: 2

7 May 1997

5340-14-512-7514
Plug Button

145127514
800033752: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-357-8674
Access Cover

143578674
0000139481: RNCC: 3 | RNVC: 2
139481: RNCC: 5 | RNVC: 9
0000139481: RNCC: 5 | RNVC: 9

20 Jul 1979

5340-14-548-6632
Retaining Clip

145486632
044786950921: RNCC: 3 | RNVC: 2
5003079043: RNCC: 5 | RNVC: 2

30 Jan 2006

5340-14-555-7888
Mounting Plate

145557888
0292117080: RNCC: 3 | RNVC: 2

14 Dec 2007

5340-14-425-7628
Access Cover

144257628
160H742071-48: RNCC: 3 | RNVC: 2

21 Jul 1988

5340-14-551-5071
Angle Bracket

145515071
RA1M704826251A1: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-517-0140
Pipe Hanger

145170140
RA1M709314620: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-418-1097
Rod End Clevis

144181097
564086G0006: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-505-7007
Mounting Bracket

145057007
327011: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-541-5490
Butt Hinge

145415490
31105480: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-472-4499
Angle Bracket

144724499
DAV2056: RNCC: 3 | RNVC: 2

26 Oct 1994

5340-14-463-5598
Access Cover

144635598
0185101050: RNCC: 3 | RNVC: 2
89414671: RNCC: 5 | RNVC: 2

17 Jun 1993

5340-14-520-1783
Mounting Bracket

145201783
40503036: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-530-2397
Mounting Bracket

145302397
F00188013: RNCC: 3 | RNVC: 2
F00188013: RNCC: 5 | RNVC: 9

22 May 2002

5340-14-482-0484
Roller Holder

144820484
FHBC0004601: RNCC: 3 | RNVC: 2

18 Jun 1996

5340-14-434-6020
Rod End Clevis

144346020
UJA0024-2-3: RNCC: 3 | RNVC: 9

26 Sep 1989

5340-14-514-9649
Angle Bracket

145149649
46246363: RNCC: 3 | RNVC: 2
46246363: RNCC: 5 | RNVC: 9

23 Jun 1999

5340-14-403-9007
Anchor Strap

144039007
1808101M1: RNCC: 3 | RNVC: 2
1808101M1: RNCC: 5 | RNVC: 9

11 Sep 1985

5340-14-433-5374
Runner

144335374
8164571: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-472-0140
Support Hook

144720140
PM1A713512103: RNCC: 3 | RNVC: 2
PM1A713512103: RNCC: 5 | RNVC: 2

30 Sep 1994

5340-14-436-8513
Cover Strip

144368513
DA2C264931081: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-464-2151
Loop Clamp

144642151
5624127473: RNCC: 3 | RNVC: 2
5624127473: RNCC: 3 | RNVC: 2
5624127473: RNCC: 5 | RNVC: 2
18007120009: RNCC: 5 | RNVC: 2

27 Jul 1993

5340-14-469-0610
Loop Clamp

144690610
PE27010A8: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-14-550-4670
Angle Bracket

145504670
RA1B701335021: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-544-2800
Handwheel

145442800
8239: RNCC: 3 | RNVC: 2
8047552K00: RNCC: 5 | RNVC: 2

17 Jan 2005

5340-14-544-3621
Loop Clamp

145443621
65469: RNCC: 3 | RNVC: 2

24 Jan 2005

5340-14-399-0802
Anchor Strap

143990802
219591: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-349-3024
Access Cover

143493024
127918: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-031-8425
Loop Clamp

140318425
4631A: RNCC: 3 | RNVC: 9

5 Jul 1980

5340-14-551-3419
Angle Bracket

145513419
RA1M112141665: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-446-2840
Cover Strip

144462840
093563Y: RNCC: 3 | RNVC: 2

12 Mar 1991

5340-14-454-8725
Bumper

144548725
90050: RNCC: 3 | RNVC: 2

24 Apr 1992

5340-14-461-0510
Mounting Bracket

144610510
TB4011804: RNCC: 3 | RNVC: 2

22 Feb 1993

5340-14-318-0523
Retaining Strap

143180523
0213950020: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-473-6486
Angle Bracket

144736486
332A22-1943-20: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-348-1099
Retaining Strap

143481099
C82-58000: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-299-5967
Mounting Bracket

142995967
501-709-695-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-345-8402
Bumper

143458402
326693: RNCC: 3 | RNVC: 2
20326693-8: RNCC: 5 | RNVC: 2

5 Nov 1977

5340-14-427-8711
Angle Bracket

144278711
111223: RNCC: 3 | RNVC: 2

17 Nov 1988

5340-14-449-8314
Clamping Catch

144498314
993-04-01-13: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-14-509-8045
Access Cover

145098045
1600-101-226-03: RNCC: 3 | RNVC: 2
1560AA0012057: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-324-2462
Angle Bracket

143242462
330A22-2310-25: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-511-6289
Loop Clamp

145116289
75109-63MJ: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-555-6859
Access Cover

145556859
90840000103179A: RNCC: 3 | RNVC: 2

7 Dec 2007

5340-14-554-6818
Mounting Bracket

145546818
MB200414-G: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-14-535-8060
Pawl Fastener

145358060
36402843: RNCC: 3 | RNVC: 2

25 Jun 2003

5340-14-271-7880
Loop Clamp

142717880
4216: RNCC: 3 | RNVC: 2
DC57: RNCC: 5 | RNVC: 2
EA20469: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-435-7855
Angle Bracket

144357855
16776647: RNCC: 3 | RNVC: 2

22 Nov 1989

5340-14-500-9545
Access Cover

145009545
D69105300000: RNCC: 3 | RNVC: 2
F300 0T 024 9757: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-381-4912
Access Cover

143814912
F14799: RNCC: 3 | RNVC: 9
5000241457: RNCC: 5 | RNVC: 2
5000241458: RNCC: 5 | RNVC: 2
14799: RNCC: 5 | RNVC: 2
0003461758: RNCC: 5 | RNVC: 2
0003461758: RNCC: 5 | RNVC: 9
3461758: RNCC: 5 | RNVC: 9
5000241458: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-277-4475
Quick Release Pin

142774475
420-73: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-349-8679
Webbing Strap

143498679
2000070-5-23: RNCC: 3 | RNVC: 2
501329: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-416-6822
Rod End Clevis

144166822
412802070016: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-234-5856
Mounting Bracket

142345856
321A27-0464-20: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-210-5583
Loop Clamp

142105583
70855022: RNCC: 3 | RNVC: 2
70855022: RNCC: 5 | RNVC: 9
855022: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-395-5160
Mounting Bracket

143955160
5-1881B43152-931: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-381-8084
Access Cover

143818084
20070529: RNCC: 3 | RNVC: 2
20070529: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-433-7940
Friction Catch

144337940
Z310-003-000: RNCC: 3 | RNVC: 2

9 Aug 1989

5340-14-511-2519
Detent Plunger

145112519
203969: RNCC: 3 | RNVC: 2
203969-001: RNCC: 5 | RNVC: 9

9 Dec 1998

5340-14-361-2525
Angle Bracket

143612525
K16256-95: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-351-3680
Loop Clamp

143513680
501-803-696-0: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-488-4247
Angle Bracket

144884247
A10-74-818-15-0: RNCC: 3 | RNVC: 2

7 May 1997

5340-14-527-2663
Swivel Caster

145272663
97GR04: RNCC: 3 | RNVC: 9

17 Oct 2001

5340-14-369-2063
Access Cover

143692063
60100-091: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-254-9624
Bumper

142549624
A10-12-700-58-0: RNCC: 3 | RNVC: 2
A10-12-700-58-0: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-360-4856
Rod End Clevis

143604856
A0249-006R1F9: RNCC: 3 | RNVC: 2

23 Nov 1979

5340-14-489-6879
Angle Bracket

144896879
332P87-0026-62: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-365-8950
Webbing Strap

143658950
16299772: RNCC: 1 | RNVC: 2
044U02-20980P: RNCC: 3 | RNVC: 2
0020980P00: RNCC: 5 | RNVC: 2
16299772: RNCC: 5 | RNVC: 9

4 Nov 1980

5340-14-349-1740
Mending Plate

143491740
341A65-7648-03: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-14-345-6671
Handwheel

143456671
MAT137-003F12AVIORB: RNCC: 3 | RNVC: 2
GSM137-007F36AVI0R: RNCC: 5 | RNVC: 2
GSM137-007F36AVI0RB: RNCC: 5 | RNVC: 2

5 Oct 1977

5340-14-445-4440
Mounting Bracket

144454440
SOB1600-90-05: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-386-4779
Loop Clamp

143864779
320-060-201-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-316-5170
T Plate

143165170
321A22-9700-20: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-292-5556
Angle Bracket

142925556
121E26-800-51-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-275-2837
Retaining Strap

142752837
502-706-070-0: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-376-0102
Rim Latch Set

143760102
JVCT02-20: RNCC: 3 | RNVC: 2

30 Mar 1982

5340-14-252-0634
Loop Clamp

142520634
15260M6: RNCC: 3 | RNVC: 2
675-406-130-0: RNCC: 5 | RNVC: 2
15260M6: RNCC: 5 | RNVC: 9
675-406-130-0: RNCC: 8 | RNVC: 2

1 Jan 1968

5340-14-298-8257
Strap Fastener Loop

142988257
11324-025: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-338-4922
T Plate

143384922
3160S23-11-106: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-430-3328
Clamping Catch

144303328
6291-41029: RNCC: 3 | RNVC: 2

15 Mar 1989

5340-14-517-1686
Mounting Bracket

145171686
341A76-2526-28: RNCC: 3 | RNVC: 2

10 Nov 1999

5340-14-395-6913
Quick Release Pin

143956913
853-200-427-0: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-537-8938
Loop Clamp

145378938
28-8-W4-VPE: RNCC: 3 | RNVC: 2
28/8-W4-VPE: RNCC: 3 | RNVC: 2
18590285-0: RNCC: 5 | RNVC: 2

3 Dec 2003

5340-14-372-6340
Anchor Strap

143726340
24C7006: RNCC: 3 | RNVC: 2
DALX137-9: RNCC: 5 | RNVC: 2

21 Sep 1981

5340-14-286-4610
Angle Bracket

142864610
341A22-1016-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-543-7866
Webbing Strap

145437866
01155-1-NOI LG1,5M: RNCC: 3 | RNVC: 2

10 Dec 2004

5340-14-442-0242
Mounting Bracket

144420242
332A87-1183-20: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-472-3137
Mounting Plate

144723137
C57042-23: RNCC: 3 | RNVC: 2

19 Oct 1994

5340-14-263-9692
Bumper

142639692
330A87-1129-28: RNCC: 3 | RNVC: 2
330A87-1129-2800: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-524-1846
Detent Plunger

145241846
24-20-412-10: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-483-1161
Mounting Plate

144831161
0201-445-04-02-25: RNCC: 3 | RNVC: 2

8 Aug 1996

5340-14-290-8907
Mounting Plate

142908907
NO PRIMARY REF14-290-8907: RNCC: 3 | RNVC: 2
CR9522: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-508-5543
Access Cover

145085543
PD0208AA0-0400: RNCC: 3 | RNVC: 2
PD0208AA0-0400: RNCC: 5 | RNVC: 2

16 Sep 1998

5340-14-471-8847
Plug Button

144718847
341A41-5205-09: RNCC: 3 | RNVC: 2

21 Sep 1994

5340-14-550-5896
Access Cover

145505896
RPL541-220-440: RNCC: 3 | RNVC: 2

28 Jun 2006

5340-14-381-3921
Runner

143813921
815205: RNCC: 3 | RNVC: 2
W06269-08: RNCC: 5 | RNVC: 2
477012: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-341-7156
Buckle

143417156
34209-160-171: RNCC: 3 | RNVC: 2
34209-160-017: RNCC: 5 | RNVC: 2
TID25545: RNCC: 5 | RNVC: 2

14 Apr 1977

5340-14-576-9792
Utility Access Door

145769792
BAMODE20001300T: RNCC: 3 | RNVC: 2
S5402304: RNCC: 5 | RNVC: 2

25 Jul 2013

5340-14-208-1527
Angle Bracket

142081527
101447: RNCC: 3 | RNVC: 9

1 Jan 1964

5340-14-486-0133
Pipe Hanger

144860133
PM1A514100080: RNCC: 3 | RNVC: 2
PM1A514100080: RNCC: 5 | RNVC: 2

26 Feb 1997

5340-14-330-1716
Control Rod

143301716
901MA0021REP15: RNCC: 3 | RNVC: 2
901MA021REP15: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-381-4520
Quick Release Pin

143814520
PAA22001050200: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-344-1228
Angle Bracket

143441228
732153: RNCC: 3 | RNVC: 2

13 Jul 1977

5340-14-395-9692
Anchor Strap

143959692
193736: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-468-9888
Retaining Strap

144689888
20322342: RNCC: 3 | RNVC: 2
20322342: RNCC: 5 | RNVC: 9

30 Mar 1994

5340-14-228-7817
Bumper

142287817
706180: RNCC: 3 | RNVC: 9
76292: RNCC: 5 | RNVC: 9
062076292: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-468-6322
Clamping Catch

144686322
4FE213AZB: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-14-488-2545
Mounting Bracket

144882545
0320160750: RNCC: 3 | RNVC: 2

23 Apr 1997

5340-14-418-4847
Belt-Strap Keeper

144184847
61558: RNCC: 3 | RNVC: 2

26 Aug 1987

5340-14-544-0517
Mounting Plate

145440517
AMPC SANI E227341: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-14-445-0609
Mounting Bracket

144450609
925499: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-14-284-0010
Loop Clamp

142840010
TY15: RNCC: 3 | RNVC: 2
20394530: RNCC: 5 | RNVC: 2
203530: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-355-2188
Angle Bracket

143552188
16348613: RNCC: 3 | RNVC: 2
16348613: RNCC: 5 | RNVC: 9

19 Mar 1979

5340-14-499-4088
Clamping Catch

144994088
09.44530: RNCC: 3 | RNVC: 2
A09040227: RNCC: 3 | RNVC: 2
0944530: RNCC: 5 | RNVC: 2
A09040227: RNCC: 5 | RNVC: 9
F300 0T 022 0156: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-346-5465
Rod End Clevis

143465465
939247: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-440-6411
Mounting Bracket

144406411
16326527: RNCC: 3 | RNVC: 2

18 Jul 1990

5340-14-356-9711
Pipe Hanger

143569711
0279947470: RNCC: 3 | RNVC: 2

15 May 1979

5340-14-307-0949
Plug Button

143070949
10803A1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-031-0676
Angle Bracket

140310676
VDP2094: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-301-1953
Angle Bracket

143011953
1118A154: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-455-9354
Handle Grip

144559354
PM1A727589013: RNCC: 3 | RNVC: 2
PM1A727589013: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-531-8256
Mounting Bracket

145318256
341A65-7823-01: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-293-8920
Bumper

142938920
EQDIV43-07: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-479-7408
Bumper

144797408
PM1A761037173A1: RNCC: 3 | RNVC: 2
PM1A761037173A1: RNCC: 5 | RNVC: 2
85-695-4343: RNCC: 6 | RNVC: 9

2 Feb 1996

5340-14-402-2734
Webbing Strap

144022734
E180-4M: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-327-9911
Access Cover

143279911
554-413-510FF2DET2: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-455-1493
Threaded Rod End

144551493
20247185: RNCC: 3 | RNVC: 2
20247185: RNCC: 5 | RNVC: 2
85-693-8734: RNCC: 6 | RNVC: 9

1 May 1992

5340-14-346-0170
Rod End Clevis

143460170
453-50004-000: RNCC: 3 | RNVC: 2
M334-01-20-08-13: RNCC: 3 | RNVC: 2
453-50004-000: RNCC: 5 | RNVC: 2
45350004000: RNCC: 5 | RNVC: 2
453-50004-000: RNCC: 5 | RNVC: 9

5 Nov 1977

5340-14-312-8617
Angle Bracket

143128617
160-61605-03: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-524-4842
Mounting Bracket

145244842
ST159-2M171P27: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-533-1801
Mounting Bracket

145331801
915-485: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-14-246-8923
Retaining Strap

142468923
NO PRIMARY REF14-246-8923: RNCC: 3 | RNVC: 2
0900030: RNCC: 5 | RNVC: 9
1470: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-361-5285
Detent Plunger

143615285
B0009-011F9: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-296-8214
Case Corner

142968214
NO PRIMARY REF14-296-8214: RNCC: 3 | RNVC: 2
1213003: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-218-0686
Loop Clamp

142180686
NO PRIMARY REF14-218-0686: RNCC: 3 | RNVC: 2
85127: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-361-2530
Rod End Clevis

143612530
K41281-18: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-477-1409
Access Cover

144771409
3511-312-34431: RNCC: 3 | RNVC: 2
3511-312-34431: RNCC: 5 | RNVC: 9

26 Jul 1995

5340-14-520-7363
Arched Cushion

145207363
MAT169-0027F19DE30: RNCC: 3 | RNVC: 2

6 Jun 2000

5340-14-329-5234
Mending Plate

143295234
420448: RNCC: 3 | RNVC: 2
PAA25-21-14: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-338-4529
Angle Bracket

143384529
330A65-4432-21: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-468-3718
Mounting Plate

144683718
1081888M00: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-14-266-3123
Retaining Strap

142663123
155998: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-537-0028
Angle Bracket

145370028
34303003: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-471-0595
Retaining Band

144710595
1077101N00: RNCC: 3 | RNVC: 2

22 Jul 1994

5340-14-501-2116
Mounting Plate

145012116
412412-201.22.03.90: RNCC: 3 | RNVC: 2
412412-201-22-03-90: RNCC: 3 | RNVC: 2
F300 0T 025 2521: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-425-9124
Angle Bracket

144259124
BFP00714: RNCC: 3 | RNVC: 2

28 Jul 1988

5340-14-547-4481
Webbing Strap

145474481
5010527861: RNCC: 3 | RNVC: 2

13 Oct 2005

5340-14-549-0874
Pipe Hanger

145490874
RA1M704855411A1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-361-2249
Leaf Spring

143612249
5000320447: RNCC: 3 | RNVC: 2
5000320447: RNCC: 5 | RNVC: 9

24 Jan 1980

5340-14-511-8823
Runner

145118823
RL001PE010009: RNCC: 1 | RNVC: 2
RL001PE010009: RNCC: 3 | RNVC: 2
RL001PE010009: RNCC: 5 | RNVC: 9
RL001PE010009: RNCC: 5 | RNVC: 9

28 Jan 1999

5340-14-532-1249
Mounting Plate

145321249
5000138587: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-14-469-5726
Bow Handle

144695726
30588777: RNCC: 3 | RNVC: 2
1088203W00: RNCC: 5 | RNVC: 2

4 May 1994

5340-14-509-2123
Lock Bolt

145092123
H125188: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-419-8470
Sliding Door Track

144198470
112343-97: RNCC: 3 | RNVC: 2
R402161117REP97: RNCC: 5 | RNVC: 2

5 Nov 1987

5340-14-391-5496
Pipe Hanger

143915496
0022127038: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-431-4136
Loop Clamp

144314136
007216010P: RNCC: 3 | RNVC: 2

18 Apr 1989

5340-14-451-5518
Mounting Bracket

144515518
19A600: RNCC: 3 | RNVC: 2
85-693-9257: RNCC: 6 | RNVC: 9

21 Nov 1991

5340-14-293-3508
Pipe Hanger

142933508
121E52-165-00-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-441-6680
Butt Hinge

144416680
BN339-506A02-0-020: RNCC: 2 | RNVC: 2

10 Sep 1990

5340-14-357-8877
Webbing Strap

143578877
3511-131-27841: RNCC: 3 | RNVC: 2
3511 131 27841: RNCC: 5 | RNVC: 2

20 Jul 1979

5340-14-453-7230
Mounting Bracket

144537230
10-245-03-02-022: RNCC: 3 | RNVC: 2

5 Mar 1992

5340-14-419-2395
Anchor Strap

144192395
8525-26: RNCC: 3 | RNVC: 2
9223330680: RNCC: 5 | RNVC: 2
9408525260: RNCC: 5 | RNVC: 2
9223330680: RNCC: 5 | RNVC: 2

16 Oct 1987

5340-14-542-0264
Utility Access Door

145420264
20051-905: RNCC: 3 | RNVC: 2
502118010029A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-366-9118
Loop Clamp

143669118
626088: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-435-5503
Mounting Plate

144355503
AL7708-3: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-561-7066
Utility Resilient Mount

145617066
CB1270-50IM2: RNCC: 3 | RNVC: 2

25 Aug 2009

5340-14-481-0959
Pipe Hanger

144810959
78733-020-036A: RNCC: 3 | RNVC: 2

18 Apr 1996

5340-14-361-7047
Rod End Clevis

143617047
H15462-51: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-321-6199
Bumper

143216199
T15N000-26: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-425-6044
Angle Bracket

144256044
13-203-182: RNCC: 3 | RNVC: 2

12 Jul 1988

5340-14-578-0529
Utility Resilient Mount

145780529
FR-26033900136: RNCC: 3 | RNVC: 2
26033900136: RNCC: 3 | RNVC: 9

24 Oct 2013

5340-14-292-2276
Pipe Hanger

142922276
330A75-9636-00: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-443-0377
Bumper

144430377
5135-112-000A: RNCC: 3 | RNVC: 2
85-694-3319: RNCC: 6 | RNVC: 9

7 Nov 1990

5340-14-462-9766
Retaining Strap

144629766
160R712015-09: RNCC: 3 | RNVC: 2

12 May 1993

5340-14-472-5476
Plug Button

144725476
301-300: RNCC: 3 | RNVC: 2

28 Oct 1994

5340-14-286-4684
Lock Bolt

142864684
341A25-1068-00: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-374-3477
Retaining Strap

143743477
54250-047-1: RNCC: 3 | RNVC: 2
54250-047-1: RNCC: 5 | RNVC: 9
1-1315AA00-18: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-14-031-3140
Loop Clamp

140313140
PAS5-434-28: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-507-4819
Corner Brace

145074819
RENFO94015X00: RNCC: 3 | RNVC: 2

16 Jul 1998

5340-14-490-4550
Mounting Bracket

144904550
CT26106: RNCC: 3 | RNVC: 2
CT26106: RNCC: 5 | RNVC: 2

1 Oct 1997

5340-14-282-5193
Loop Clamp

142825193
352087: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-452-0540
Mounting Bracket

144520540
SK20135: RNCC: 3 | RNVC: 2

18 Dec 1991

5340-14-527-3798
Track Stop

145273798
H145055W: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-462-8924
Access Cover

144628924
A6191REP2: RNCC: 3 | RNVC: 2

5 May 1993

5340-14-281-2134
Retaining Strap

142812134
202669: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-379-7222
Access Cover

143797222
BAZ4342: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-322-9192
Angle Bracket

143229192
188788: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-541-8041
Loop Clamp

145418041
T070G1005811: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-517-0303
Loop Clamp

145170303
51520605020: RNCC: 3 | RNVC: 2
21FE20: RNCC: 5 | RNVC: 2

28 Oct 1999

5340-14-439-7097
Mounting Bracket

144397097
154332: RNCC: 3 | RNVC: 2
392938: RNCC: 5 | RNVC: 2

16 May 1990

5340-14-535-1837
Mounting Bracket

145351837
5000890126: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-545-5973
Loop Clamp

145455973
2203180166: RNCC: 3 | RNVC: 2

25 Apr 2005

5340-14-422-3536
Push Door Plate

144223536
000202456800: RNCC: 3 | RNVC: 2

1 Mar 1988

5340-14-367-6196
Control Rod

143676196
100070: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-541-9063
Expansion Shield

145419063
8694: RNCC: 3 | RNVC: 2
RAWLNUT5250A: RNCC: 5 | RNVC: 2
SC030340: RNCC: 6 | RNVC: 9

2 Jul 2004

5340-14-468-0795
Mounting Plate

144680795
LYN008055030120: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-323-0837
Mounting Plate

143230837
M109405: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-211-2491
Retaining Strap

142112491
85480: RNCC: 3 | RNVC: 2
502724: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-518-2605
Mounting Plate

145182605
5010376972: RNCC: 3 | RNVC: 2
0187: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-14-540-2109
Mounting Bracket

145402109
MC2142F00: RNCC: 3 | RNVC: 2

11 Mar 2004

5340-14-548-7563
Snap Hook

145487563
M34 TLN: RNCC: 3 | RNVC: 2
M21NOI: RNCC: 3 | RNVC: 9

7 Feb 2006

5340-14-513-2029
Mounting Plate

145132029
T281A20T0003: RNCC: 1 | RNVC: 2
503358: RNCC: 3 | RNVC: 2

10 Mar 1999

5340-14-473-1346
Mounting Plate

144731346
3430723: RNCC: 3 | RNVC: 2

7 Dec 1994

5340-14-451-5172
Mounting Plate

144515172
532426: RNCC: 3 | RNVC: 2

21 Nov 1991

5340-14-324-6216
Angle Bracket

143246216
443479: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-527-7496
Mounting Plate

145277496
709815: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-14-551-2910
Angle Bracket

145512910
RA1M703157514: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-504-3030
Mounting Bracket

145043030
3700316M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-431-4421
Angle Bracket

144314421
231070002: RNCC: 3 | RNVC: 9

19 Apr 1989

5340-14-555-4239
Retaining Strap

145554239
19224955: RNCC: 3 | RNVC: 2

8 Nov 2007

5340-14-512-8281
Mounting Plate

145128281
210673: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-547-5450
Pipe Hanger

145475450
RA1M704826121A1: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-315-9637
Key Blank

143159637
40X60X750ACB165: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-542-9767
Mounting Plate

145429767
T257A4004220: RNCC: 3 | RNVC: 2

18 Aug 2004

5340-14-525-1768
Mounting Plate

145251768
14240070M: RNCC: 3 | RNVC: 2
0310P107023: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-393-6260
Retaining Strap

143936260
G0339Y1: RNCC: 3 | RNVC: 2

7 Jun 1984

5340-14-360-1750
Pipe Hanger

143601750
A11A221172240A1: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-485-3160
Plug Button

144853160
VAT5G007: RNCC: 3 | RNVC: 2

15 Jan 1997

5340-14-334-4670
Support Hook

143344670
0606551402: RNCC: 3 | RNVC: 2
0606551402: RNCC: 3 | RNVC: 2
0606551402: RNCC: 5 | RNVC: 9

1 Jun 1976

5340-14-482-4209
Pipe Hanger

144824209
78733-025-034: RNCC: 3 | RNVC: 2

11 Jul 1996

5340-14-532-4320
Mounting Bracket

145324320
9010-135-000A: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-361-2641
Anchor Strap

143612641
U07461-15: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-552-5440
Mounting Bracket

145525440
350A25-0031-4901: RNCC: 3 | RNVC: 2

15 Jan 2007

5340-14-533-1837
Loop Clamp

145331837
1713-01: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-14-354-2597
Lock-Release Lever

143542597
650-43631-00: RNCC: 3 | RNVC: 2

30 Jan 1979

5340-14-365-7885
Retaining Strap

143657885
043-04-18: RNCC: 3 | RNVC: 2

8 Oct 1980

5340-14-464-1645
Loop Clamp

144641645
51121905003: RNCC: 3 | RNVC: 2
24PE3: RNCC: 5 | RNVC: 2
25PE3: RNCC: 5 | RNVC: 2
51121919003: RNCC: 5 | RNVC: 2
85-695-0257: RNCC: 6 | RNVC: 9

15 Jul 1993

5340-14-529-5532
Mounting Plate

145295532
330A25-2229-20: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-550-0367
Pipe Hanger

145500367
EA6M702-34-850: RNCC: 3 | RNVC: 2

30 May 2006

5340-14-476-1153
Bail Handle

144761153
89-2-093-5780C4: RNCC: 3 | RNVC: 2
1039482P00: RNCC: 5 | RNVC: 2

22 May 1995

5340-14-467-9540
Synchro Clamp

144679540
A15-58770: RNCC: 3 | RNVC: 2

2 Feb 1994

5340-14-509-1253
Rod End Clevis

145091253
ND2431: RNCC: 3 | RNVC: 2
91263014-06: RNCC: 5 | RNVC: 9

21 Oct 1998

5340-14-526-3136
Angle Bracket

145263136
304-091-802-0: RNCC: 3 | RNVC: 2

18 Jul 2001

5340-14-338-6206
Runner

143386206
0008529543: RNCC: 3 | RNVC: 2
8529543: RNCC: 5 | RNVC: 9

27 Aug 1997

5340-14-552-2343
Mounting Bracket

145522343
SZ18.705.516D: RNCC: 3 | RNVC: 2

5 Dec 2006

5340-14-571-2842
Coating Plate

145712842
1PM00275051: RNCC: 3 | RNVC: 2

8 Mar 2012

5340-14-354-1255
Retaining Strap

143541255
16273713: RNCC: 3 | RNVC: 2
16273713: RNCC: 5 | RNVC: 2
16273713: RNCC: 5 | RNVC: 9

16 Jan 1979

5340-14-554-8849
Loop Clamp

145548849
78651RH22CP: RNCC: 1 | RNVC: 2
78651RH22CP: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-500-3840
Mounting Plate

145003840
D62102300012: RNCC: 3 | RNVC: 2
F300 0T 024 3941: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-513-0586
Webbing Strap

145130586
009599035P: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-14-500-6419
Loop Clamp

145006419
E64209005000: RNCC: 3 | RNVC: 2
F300 0T 024 6605: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-527-5183
Mounting Plate

145275183
MBEU161758: RNCC: 3 | RNVC: 2
MBEU161758: RNCC: 5 | RNVC: 2

30 Oct 2001

5340-14-552-4151
Mounting Bracket

145524151
10627420001: RNCC: 3 | RNVC: 2

20 Dec 2006

5340-14-536-9782
Metal Grille

145369782
7204-93: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-547-5368
Angle Bracket

145475368
RA1M704656861: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-479-6931
Mounting Bracket

144796931
700070: RNCC: 3 | RNVC: 2

31 Jan 1996

5340-14-540-2345
Stand Base

145402345
61226459AA: RNCC: 3 | RNVC: 2
61226459: RNCC: 5 | RNVC: 2

12 Mar 2004

5340-14-542-2094
Mounting Bracket

145422094
10028369: RNCC: 3 | RNVC: 2
10028369: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-312-1650
Retaining Strap

143121650
C65438: RNCC: 3 | RNVC: 2
C65438: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-546-2028
Cushioning Pad

145462028
100X32EP5MM: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-485-5304
Angle Bracket

144855304
15144508: RNCC: 3 | RNVC: 2

29 Jan 1997

5340-14-518-4606
Mounting Bracket

145184606
T711A1001128: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-390-2857
Control Rod

143902857
146255: RNCC: 3 | RNVC: 9

26 Jan 1984

5340-14-546-4470
Aircraft Latch Hook

145464470
DAR710001U2: RNCC: 3 | RNVC: 2

6 Jul 2005

5340-14-351-9291
Retaining Strap

143519291
53132-310-010: RNCC: 3 | RNVC: 2
53132-310-010: RNCC: 5 | RNVC: 2

16 Oct 1978

5340-14-315-7237
Rod End Clevis

143157237
321A65-4081-21: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-273-5944
Loop Clamp

142735944
NO PRIMARY REF14-273-5944: RNCC: 3 | RNVC: 2
9562841010: RNCC: 5 | RNVC: 2
13333M6: RNCC: 5 | RNVC: 9
13333M6: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-524-4463
Rim Latch Set

145244463
01-13-41: RNCC: 3 | RNVC: 2
SYB2074: RNCC: 5 | RNVC: 2

20 Mar 2001

5340-14-349-9425
Retaining Strap

143499425
P4H003515-02: RNCC: 3 | RNVC: 2
4H003515-02: RNCC: 5 | RNVC: 2
4H003515-02: RNCC: 5 | RNVC: 9
P4H003515-02: RNCC: 5 | RNVC: 9

14 Jun 1978

5340-14-542-0561
Loop Clamp

145420561
25292104-075: RNCC: 3 | RNVC: 2
502103005008A: RNCC: 3 | RNVC: 9
2529 2104-075: RNCC: 5 | RNVC: 2

2 Jul 2004

5340-14-454-9934
Loop Clamp

144549934
NSA5516-09NV: RNCC: 3 | RNVC: 2
NSA5516-09NV: RNCC: 5 | RNVC: 2

1 May 1992

5340-14-386-9193
Screw Hook

143869193
5340CKG0NDVISB0ISAC4X50: RNCC: 2 | RNVC: 2

24 Aug 1983

5340-14-445-1641
Clamping Catch

144451641
2000SA-NS: RNCC: 3 | RNVC: 2
91629252: RNCC: 5 | RNVC: 2

4 Feb 1991

5340-14-514-0769
Pawl Fastener Set

145140769
PM1A005001N21: RNCC: 3 | RNVC: 2
PM1A005001N21: RNCC: 5 | RNVC: 2
MJCE: RNCC: 5 | RNVC: 9

22 Apr 1999

5340-14-497-3164
Mounting Bracket

144973164
19206088: RNCC: 3 | RNVC: 2
19206088: RNCC: 5 | RNVC: 2
F300 0T 023 0016: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-420-1376
Swivel Caster

144201376
52250SP: RNCC: 3 | RNVC: 2
85-692-9334: RNCC: 6 | RNVC: 9

18 Nov 1987

5340-14-424-6921
Leaf Spring

144246921
R080-002U400A: RNCC: 3 | RNVC: 2
85-693-5065: RNCC: 6 | RNVC: 9

2 Jun 1988

5340-14-521-4079
T Bracket

145214079
10476239: RNCC: 3 | RNVC: 2

26 Jul 2000

5340-14-502-6237
Screw Hook

145026237
7700638676: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-205-0358
Retaining Strap

142050358
223-99-003: RNCC: 3 | RNVC: 2
0223990030: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-548-5636
Mounting Bracket

145485636
5010399578: RNCC: 3 | RNVC: 2

26 Jan 2006

5340-14-341-3277
Locking Stay

143413277
420523: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-394-9719
Bumper

143949719
20321483: RNCC: 3 | RNVC: 2
20321483: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-549-5963
Access Cover

145495963
46241739: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-14-442-0921
Mounting Bracket

144420921
1290009: RNCC: 3 | RNVC: 2
1290009: RNCC: 5 | RNVC: 9

1 Oct 1990

5340-14-513-0567
Webbing Strap

145130567
009582035P: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-14-314-3121
Retaining Strap

143143121
5100105401: RNCC: 3 | RNVC: 2
163794: RNCC: 3 | RNVC: 2
5172093300: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-522-4423
Access Cover

145224423
10606434: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-14-375-8912
Angle Bracket

143758912
5000099110: RNCC: 3 | RNVC: 2
5000099110: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-443-0419
Bow Handle

144430419
PM1A214750310: RNCC: 3 | RNVC: 2
PM1A214750310: RNCC: 5 | RNVC: 2

7 Nov 1990

5340-14-552-0553
Angle Bracket

145520553
0249920150: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-14-349-7512
Access Cover

143497512
053M26-502946W: RNCC: 3 | RNVC: 2
0502946W00: RNCC: 5 | RNVC: 2

14 Jun 1978

5340-14-480-9510
Anchor Strap

144809510
5010113300: RNCC: 3 | RNVC: 2

11 Apr 1996

5340-14-418-5698
Mounting Plate

144185698
31731095: RNCC: 3 | RNVC: 9

2 Sep 1987

Load More Results