What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 39 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 39 of 446

5340-14-464-3422
Access Cover

144643422
ST406M52A56: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-351-2467
Mounting Plate

143512467
371435: RNCC: 3 | RNVC: 2
371435: RNCC: 5 | RNVC: 2
371435: RNCC: 5 | RNVC: 9

10 Aug 1978

5340-14-436-6358
Mounting Bracket

144366358
DA2C202481400: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-440-2326
Access Cover

144402326
30358990F: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-461-6589
Access Cover

144616589
1039190E00: RNCC: 3 | RNVC: 2

19 Mar 1993

5340-14-542-7721
Utility Access Door

145427721
8011795Y00: RNCC: 3 | RNVC: 2

13 Aug 2004

5340-14-549-1602
Mounting Bracket

145491602
5000138640: RNCC: 3 | RNVC: 2

6 Mar 2006

5340-14-546-3732
Retaining Band

145463732
5010248228: RNCC: 3 | RNVC: 2

28 Jun 2005

5340-14-404-6619
Retaining Strap

144046619
5172047000: RNCC: 3 | RNVC: 2
720470: RNCC: 5 | RNVC: 9

20 Nov 1985

5340-14-354-9018
Rim Lock Set

143549018
134: RNCC: 3 | RNVC: 9
41995: RNCC: 5 | RNVC: 2
2000070-2-23: RNCC: 5 | RNVC: 2
134-000: RNCC: 5 | RNVC: 9

20 Feb 1979

5340-14-402-6557
Access Cover

144026557
4108-16: RNCC: 3 | RNVC: 2
605659: RNCC: 5 | RNVC: 2
2-410816: RNCC: 5 | RNVC: 2

19 Jul 1985

5340-14-384-1456
Loop Clamp

143841456
403-194-121-0: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-365-3297
Rod End Clevis

143653297
303-122-401-0: RNCC: 3 | RNVC: 2
303-122-403-0: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-225-8372
Synchro Clamp

142258372
S2087-2DG: RNCC: 3 | RNVC: 2
S2087-2: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-379-3807
Retaining Clip

143793807
NO PRIMARY REF14-379-3807: RNCC: 3 | RNVC: 2
345-60112-0: RNCC: 5 | RNVC: 9
345601120: RNCC: 5 | RNVC: 9

1 Oct 1982

5340-14-413-9025
Rod End Clevis

144139025
FLCK10X1-5X27-5: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-543-3819
Webbing Strap

145433819
604100: RNCC: 3 | RNVC: 2

26 Oct 2004

5340-14-529-4197
Pipe Hanger

145294197
EA1M703-10-880: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-425-4800
Control Rod

144254800
0010216337A032: RNCC: 3 | RNVC: 2
1-30-32-216: RNCC: 3 | RNVC: 9

6 Jul 1988

5340-14-542-1390
Butt Hinge

145421390
5302835-042-02-A: RNCC: 3 | RNVC: 2
5302835-042-02A: RNCC: 5 | RNVC: 2

8 Jul 2004

5340-14-388-5428
Loop Clamp

143885428
NO PRIMARY REF14-388-5428: RNCC: 3 | RNVC: 2
2643118-2: RNCC: 5 | RNVC: 2
2643118-2: RNCC: 5 | RNVC: 9

3 Nov 1983

5340-14-533-5681
Angle Bracket

145335681
9010-114-000A: RNCC: 3 | RNVC: 2

12 Feb 2003

5340-14-527-9269
Mounting Bracket

145279269
330A62-0251-21: RNCC: 3 | RNVC: 2

28 Nov 2001

5340-14-369-5080
Rigid Caster

143695080
501-730-540-0: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-430-1885
Rod End Connector

144301885
160-23450-01: RNCC: 3 | RNVC: 2

8 Mar 1989

5340-14-507-9939
Bow Handle

145079939
AN1078: RNCC: 3 | RNVC: 9
1078 POIGN 1/4D-G VARIE: RNCC: 5 | RNVC: 9
8921600039: RNCC: 5 | RNVC: 9
042000: RNCC: 5 | RNVC: 9

26 Aug 1998

5340-14-402-2344
Angle Bracket

144022344
972-0-34-53: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-452-0229
Loop Clamp

144520229
650-791-083-0: RNCC: 3 | RNVC: 2

18 Dec 1991

5340-14-473-3920
Mounting Bracket

144733920
332A41-4102-20: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-550-6118
Blank Panel

145506118
STB 4320-1002 SERTEMARCO KIT B: RNCC: 3 | RNVC: 2
EMERGENCY RESPONSE KIT B: RNCC: 5 | RNVC: 2

30 Jun 2006

5340-14-238-9221
Loop Clamp

142389221
0378770: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-494-9243
Bumper

144949243
5448379: RNCC: 3 | RNVC: 2
F300 0T 018 0803: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-396-3080
Angle Bracket

143963080
4771502240: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-375-1048
Snap Hook

143751048
39: RNCC: 3 | RNVC: 2

30 Jan 1982

5340-14-530-1237
Mounting Plate

145301237
TB3050730: RNCC: 3 | RNVC: 2

14 May 2002

5340-14-482-8904
Angle Bracket

144828904
186A076: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-554-6498
Mounting Bracket

145546498
82356284000: RNCC: 3 | RNVC: 2

31 Jul 2007

5340-14-505-4900
Loop Clamp

145054900
5000676432: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-249-8407
Loop Clamp

142498407
0000312392: RNCC: 3 | RNVC: 2
0000312392: RNCC: 5 | RNVC: 9
312392: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-555-5309
Mounting Bracket

145555309
T537A2001152: RNCC: 3 | RNVC: 2

23 Nov 2007

5340-14-469-1326
Protection Bellows

144691326
448701: RNCC: 3 | RNVC: 2
Y448701: RNCC: 5 | RNVC: 2
Y448701P: RNCC: 5 | RNVC: 2
448701P: RNCC: 5 | RNVC: 2
448701: RNCC: 5 | RNVC: 2
448701P: RNCC: 5 | RNVC: 2

6 Apr 1994

5340-14-304-3512
Loop Clamp

143043512
09112000020: RNCC: 3 | RNVC: 2
91120: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-455-3626
Mounting Bracket

144553626
5010092291: RNCC: 3 | RNVC: 2
5000732236: RNCC: 5 | RNVC: 2

21 May 1992

5340-14-480-8326
Access Cover

144808326
1302111P215: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-14-472-3765
Pipe Hanger

144723765
PM1A504100001: RNCC: 3 | RNVC: 2
PM1A504100001: RNCC: 5 | RNVC: 2

19 Oct 1994

5340-14-396-4155
Angle Bracket

143964155
102952: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-526-4705
Bow Handle

145264705
RA1M793200110A1: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-336-7051
Angle Bracket

143367051
16303479: RNCC: 3 | RNVC: 2
16303479: RNCC: 5 | RNVC: 9

7 Oct 1976

5340-14-402-5964
Loop Clamp

144025964
51123101020: RNCC: 3 | RNVC: 2
205GE20: RNCC: 5 | RNVC: 2
2911131020: RNCC: 5 | RNVC: 2

19 Jul 1985

5340-14-268-9899
Handwheel

142689899
000MA0060F5-8C1: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-541-6676
Detent Plunger

145416676
MF007AA104A: RNCC: 3 | RNVC: 2
8010800B00: RNCC: 5 | RNVC: 2

17 Jun 2004

5340-14-496-1367
Protection Bellows

144961367
66204-9: RNCC: 3 | RNVC: 2
F300 0T 020 9485: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-440-9061
Rod End Clevis

144409061
061667033: RNCC: 3 | RNVC: 9

8 Aug 1990

5340-14-459-1356
Bow Handle

144591356
61416: RNCC: 3 | RNVC: 2
E940342W: RNCC: 5 | RNVC: 2

19 Nov 1992

5340-14-478-7441
Access Cover

144787441
16603438: RNCC: 3 | RNVC: 2

20 Nov 1995

5340-14-448-7885
Blank Panel

144487885
39231173: RNCC: 3 | RNVC: 2
39231173: RNCC: 5 | RNVC: 9

10 Jul 1991

5340-14-505-5919
Pawl Fastener

145055919
E202368: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-504-8845
Snap Hook

145048845
AS110: RNCC: 3 | RNVC: 2

9 Mar 1998

5340-14-284-7207
Bumper

142847207
121E23-631-02-0: RNCC: 3 | RNVC: 2
610-000-9911: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-395-5487
Rod End Clevis

143955487
5-1881B43152-1412: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-462-1265
Loop Clamp

144621265
LN400018-F8TYPE C: RNCC: 3 | RNVC: 2
RAB0805: RNCC: 5 | RNVC: 2

6 Apr 1993

5340-14-447-6121
Mending Plate

144476121
21141762: RNCC: 3 | RNVC: 2
4-014-11/84000.10: RNCC: 5 | RNVC: 9

29 May 1991

5340-14-302-0895
Rod End Connector

143020895
A10-17-441-01-0: RNCC: 3 | RNVC: 2
A10-17-441-01-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-227-7083
T Bracket

142277083
1050-17-740-01-2: RNCC: 3 | RNVC: 2
17-740-01-2: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-386-3184
Control Rod

143863184
0010147337A180: RNCC: 3 | RNVC: 2
1-180-147: RNCC: 3 | RNVC: 9

24 Aug 1983

5340-14-539-6554
Mounting Plate

145396554
21415595-00: RNCC: 3 | RNVC: 2
21415595-9: RNCC: 5 | RNVC: 2

28 Jan 2004

5340-14-040-6391
Plug Button

140406391
A10-12-200-89-0: RNCC: 3 | RNVC: 2
A10-12-200-89-0: RNCC: 5 | RNVC: 2
A10-12-200-89-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-319-1496
Retaining Strap

143191496
NO PRIMARY REF14-319-1496: RNCC: 3 | RNVC: 2
258995: RNCC: 5 | RNVC: 9
S258995: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-333-0420
Butt Hinge

143330420
F234-14824: RNCC: 3 | RNVC: 2
F234-14-824: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-539-7334
Loop Clamp

145397334
3-2606-20D: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-14-222-6464
Strap Fastener Loop

142226464
2559G: RNCC: 3 | RNVC: 2
LFP54-404: RNCC: 3 | RNVC: 2
2559G: RNCC: 5 | RNVC: 9
LFP54-404: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-465-7355
Mortise Lock Set

144657355
7100: RNCC: 3 | RNVC: 2
301-0101: RNCC: 5 | RNVC: 2

13 Oct 1993

5340-14-220-9202
Handle Grip

142209202
28-2-2-20: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-485-7821
Mending Plate

144857821
D2023290: RNCC: 3 | RNVC: 2
D20232-90: RNCC: 5 | RNVC: 2

12 Feb 1997

5340-14-250-8528
Rod End Connector

142508528
D2140-5-39: RNCC: 3 | RNVC: 2
D2140-5-39: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-542-1245
Pawl Fastener

145421245
5302835-049-00: RNCC: 3 | RNVC: 2

7 Jul 2004

5340-14-526-0771
Arched Cushion

145260771
E1M371730: RNCC: 3 | RNVC: 2
MAT169-0024F19FORTERAIDEUR: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-14-523-6144
Mounting Plate

145236144
320388.01: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-450-1696
Mounting Bracket

144501696
92PD260110: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-456-5380
Mounting Bracket

144565380
16010740D: RNCC: 3 | RNVC: 2

8 Jul 1992

5340-14-363-0901
Mounting Plate

143630901
BJM00424: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-14-529-8621
Mounting Plate

145298621
PASSE90592D00: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-403-9840
Mending Plate

144039840
TS17659: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-528-5204
Cover Strip

145285204
SZ06.250.578: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-344-1846
Retaining Strap

143441846
714237: RNCC: 3 | RNVC: 2
5171423700: RNCC: 5 | RNVC: 2

10 Aug 1977

5340-14-524-4457
Safety Cable Kit

145244457
TM0470P042: RNCC: 3 | RNVC: 2

20 Mar 2001

5340-14-438-7074
Mending Plate

144387074
TB1030726: RNCC: 3 | RNVC: 2

30 Mar 1990

5340-14-225-7990
Bridge Clamp

142257990
504393: RNCC: 3 | RNVC: 9
5150439300: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-489-1133
Mounting Plate

144891133
01030980002: RNCC: 3 | RNVC: 2
SDM01030980002: RNCC: 5 | RNVC: 9

27 Jun 1997

5340-14-540-7374
Mounting Bracket

145407374
38051029: RNCC: 3 | RNVC: 2
00248A: RNCC: 5 | RNVC: 2
4848ZG8613181020: RNCC: 6 | RNVC: 9

22 Apr 2004

5340-14-449-4932
Support Hook

144494932
023904G: RNCC: 3 | RNVC: 2

21 Aug 1991

5340-14-409-8402
Slide Keeper

144098402
20322215: RNCC: 3 | RNVC: 2
20322215: RNCC: 5 | RNVC: 9

4 Jun 1986

5340-14-554-5717
Mounting Plate

145545717
0298802240: RNCC: 3 | RNVC: 2

20 Jul 2007

5340-14-363-8732
Rod End Clevis

143638732
NO PRIMARY REF14-363-8732: RNCC: 3 | RNVC: 2
20502: RNCC: 5 | RNVC: 9

7 Aug 1980

5340-14-408-9150
Pipe Hanger

144089150
000452: RNCC: 3 | RNVC: 2

7 Apr 1986

5340-14-464-3292
Mounting Bracket

144643292
ST406M75G80: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-551-6088
Access Cover

145516088
3CW2058: RNCC: 3 | RNVC: 2

9 Oct 2006

5340-14-476-3750
Loop Clamp

144763750
LN212PA: RNCC: 3 | RNVC: 2
03/C25025112: RNCC: 3 | RNVC: 2

7 Jun 1995

5340-14-382-9536
Flush Catch Claw

143829536
BAZ92112: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-408-0566
Rod End Clevis

144080566
5993261: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-501-8912
Metal Grille

145018912
38510363: RNCC: 3 | RNVC: 2
38510363: RNCC: 5 | RNVC: 9

19 Nov 1997

5340-14-514-1730
Loop Clamp

145141730
15261-2437-0: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-14-553-9820
Mounting Plate

145539820
181 165: RNCC: 3 | RNVC: 2
181 165: RNCC: 3 | RNVC: 2

6 Jun 2007

5340-14-551-2588
Pipe Hanger

145512588
RA1M702416281N1: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-369-9289
Casement Fastener

143699289
16-1-3264: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-430-3993
Access Cover

144303993
14400286K: RNCC: 3 | RNVC: 2

20 Mar 1989

5340-14-549-5900
Mounting Bracket

145495900
61025870AA: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-14-474-7781
Rod End Clevis

144747781
227150: RNCC: 3 | RNVC: 2

1 Mar 1995

5340-14-488-7305
Access Cover

144887305
5651927D01: RNCC: 3 | RNVC: 2
1098370Y00: RNCC: 5 | RNVC: 2

28 May 1997

5340-14-554-9112
Mounting Plate

145549112
82093618000: RNCC: 3 | RNVC: 2

6 Sep 2007

5340-14-416-4656
Webbing Strap

144164656
532560: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-14-449-6468
Bridge Clamp

144496468
1217222P009: RNCC: 3 | RNVC: 2

28 Aug 1991

5340-14-436-5629
Rod End Clevis

144365629
DA2C295500211: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-459-6059
Mounting Plate

144596059
20322688: RNCC: 3 | RNVC: 2
20322688: RNCC: 5 | RNVC: 9

10 Dec 1992

5340-14-402-1025
Rod End Clevis

144021025
400491: RNCC: 3 | RNVC: 2
BGE400491: RNCC: 5 | RNVC: 2

26 Jun 1985

5340-14-365-6864
Anchor Strap

143656864
0000715970: RNCC: 3 | RNVC: 2
0000715970: RNCC: 5 | RNVC: 9
715970: RNCC: 5 | RNVC: 9

8 Oct 1980

5340-14-301-0699
Mending Plate

143010699
NO PRIMARY REF14-301-0699: RNCC: 3 | RNVC: 2
1-959CA03-01: RNCC: 5 | RNVC: 9
1959CA03-01: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-452-2356
Loop Clamp

144522356
SM217-2 PA DP AS: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-292-5414
Angle Bracket

142925414
121E26-501-04-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-381-3640
Butt Hinge

143813640
72-7-3680: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-235-8671
Retaining Strap

142358671
A10-71-460-16-0: RNCC: 3 | RNVC: 2
A10-71-460-16-0: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-516-6902
Snap Hook

145166902
CI5124081: RNCC: 3 | RNVC: 2
91772689: RNCC: 3 | RNVC: 2
512-4-08: RNCC: 5 | RNVC: 9

12 Oct 1999

5340-14-463-9635
Access Cover

144639635
620-861-746-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5340-14-549-1769
Retaining Strap

145491769
A22825/0000: RNCC: 3 | RNVC: 2
23728353-5: RNCC: 5 | RNVC: 9

7 Mar 2006

5340-14-460-5625
Snap Hook

144605625
512-1-10-1: RNCC: 3 | RNVC: 2
512-1-10-1: RNCC: 5 | RNVC: 2
512-1-1INOX: RNCC: 5 | RNVC: 2

1 Feb 1993

5340-14-336-3820
Plug Button

143363820
9959972: RNCC: 3 | RNVC: 9
9959972: RNCC: 5 | RNVC: 2
9-95-99-72A: RNCC: 5 | RNVC: 9
9959972A: RNCC: 5 | RNVC: 9

24 Jul 1976

5340-14-574-5197
Utility Access Door

145745197
LSA 47.2-4-466: RNCC: 3 | RNVC: 2

25 Jan 2013

5340-14-388-2198
Mounting Plate

143882198
VTR501-2-5102: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-530-7692
Mounting Bracket

145307692
888-413-011-0: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-454-4893
Exit Bolt

144544893
ZF05989077: RNCC: 3 | RNVC: 2
598077: RNCC: 5 | RNVC: 2

2 Apr 1992

5340-14-362-4785
Control Rod

143624785
73-042-367: RNCC: 3 | RNVC: 2

19 Mar 1980

5340-14-473-6478
Mounting Plate

144736478
332A22-1669-21: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-520-8847
Loop Clamp

145208847
COLLI01688X00: RNCC: 3 | RNVC: 2

21 Jun 2000

5340-14-274-7446
Retaining Strap

142747446
0213100050: RNCC: 3 | RNVC: 2
213-10-005: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-390-8919
Mounting Plate

143908919
ST159-2M27P32: RNCC: 3 | RNVC: 2
J05087-027-1000P032: RNCC: 3 | RNVC: 2

1 Mar 1984

5340-14-548-4127
Runner

145484127
P1-R97068-01-13-02: RNCC: 3 | RNVC: 9
SYQ6210: RNCC: 5 | RNVC: 2

13 Jan 2006

5340-14-501-1466
Mounting Bracket

145011466
014-004-066: RNCC: 3 | RNVC: 2
014.004.066: RNCC: 3 | RNVC: 2
F300 0T 025 1868: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-448-3893
Webbing Strap

144483893
9402CRL108: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-14-368-7486
Bridge Clamp

143687486
28022862: RNCC: 3 | RNVC: 2
28022862-7: RNCC: 5 | RNVC: 2

10 Mar 1981

5340-14-394-9289
Angle Bracket

143949289
29664091: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-486-3443
Angle Bracket

144863443
PA01PD040006: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-490-6494
Mounting Plate

144906494
8000967N00: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-410-6005
Webbing Strap

144106005
006393050P: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-461-2089
Mounting Bracket

144612089
321895: RNCC: 3 | RNVC: 2
321895: RNCC: 5 | RNVC: 9

2 Mar 1993

5340-14-444-7417
Mounting Bracket

144447417
123621415: RNCC: 3 | RNVC: 9

21 Jan 1991

5340-14-343-6900
Angle Bracket

143436900
4770001720: RNCC: 3 | RNVC: 2

13 Jul 1977

5340-14-517-0095
Angle Bracket

145170095
RA1M794200880: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-413-9099
Retaining Strap

144139099
70467: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-330-9730
Bumper

143309730
0941505101: RNCC: 3 | RNVC: 2
0941505101: RNCC: 5 | RNVC: 9
941505101: RNCC: 5 | RNVC: 9
941505101: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-396-6636
Loop Clamp

143966636
407769: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-416-7939
Door Hook

144167939
JVAR18: RNCC: 3 | RNVC: 2
JVA R18: RNCC: 5 | RNVC: 2

25 Jun 1987

5340-14-226-5577
Retaining Strap

142265577
1910: RNCC: 3 | RNVC: 2
5003: RNCC: 3 | RNVC: 2
PR6: RNCC: 3 | RNVC: 9
2-02272: RNCC: 5 | RNVC: 2
0900045: RNCC: 5 | RNVC: 9
83-26-1910: RNCC: 5 | RNVC: 9
1910: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-364-7841
Access Cover

143647841
16299353: RNCC: 1 | RNVC: 2
044M00-554747E: RNCC: 3 | RNVC: 2
0554747E00: RNCC: 5 | RNVC: 2
16299353: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-429-8425
Rod End Connector

144298425
M421-310127: RNCC: 3 | RNVC: 2

14 Feb 1989

5340-14-289-3764
Angle Bracket

142893764
4H002406-00: RNCC: 3 | RNVC: 2
4H002406-00: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-456-5962
Pad Eye

144565962
005062010041: RNCC: 3 | RNVC: 2

9 Jul 1992

5340-14-535-8447
Mounting Bracket

145358447
12191-9: RNCC: 3 | RNVC: 2

25 Jun 2003

5340-14-206-2540
Butt Hinge

142062540
25110J1: RNCC: 2 | RNVC: 2
L25110-30-0-8DEA: RNCC: 5 | RNVC: 2
L25110-30-8DYA: RNCC: 5 | RNVC: 2
85-636-9481: RNCC: 6 | RNVC: 9

1 Jan 1964

5340-14-440-3055
Mounting Bracket

144403055
3511-190-35951: RNCC: 3 | RNVC: 2
89288144: RNCC: 5 | RNVC: 2

11 Jul 1990

5340-14-389-1077
Corner Brace

143891077
366A21-1153-41: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-470-1722
Rod End Connector

144701722
008766010P: RNCC: 3 | RNVC: 2

6 Jun 1994

5340-14-367-7016
Bow Handle

143677016
366A58-0100-59: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-371-9683
Handwheel

143719683
627-017: RNCC: 3 | RNVC: 2
627-10: RNCC: 5 | RNVC: 2

5 Aug 1981

5340-14-439-3249
Retaining Strap

144393249
AR-F10: RNCC: 3 | RNVC: 2
78760-05: RNCC: 5 | RNVC: 2
ARF10: RNCC: 5 | RNVC: 2

25 Apr 1990

5340-14-514-7346
Access Cover

145147346
EL82-1: RNCC: 3 | RNVC: 9

11 Jun 1999

5340-14-542-0043
Mounting Plate

145420043
20042-200: RNCC: 3 | RNVC: 2
502107002008A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-520-7624
Angle Bracket

145207624
47176465: RNCC: 3 | RNVC: 2

14 Jun 2000

5340-14-354-8346
Synchro Clamp

143548346
562107: RNCC: 3 | RNVC: 2
5156210700: RNCC: 5 | RNVC: 2

20 Feb 1979

5340-14-496-7039
Permanent Magnet

144967039
2420-6: RNCC: 3 | RNVC: 2
F300 0T 021 9326: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-376-4825
Angle Bracket

143764825
16787833: RNCC: 3 | RNVC: 2
16787833: RNCC: 5 | RNVC: 9
16787833: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-345-8367
Quick Release Pin

143458367
5380-30-07: RNCC: 3 | RNVC: 2

5 Nov 1977

5340-14-304-3622
Access Cover

143043622
61-2-36: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-332-9016
Runner

143329016
23006009: RNCC: 3 | RNVC: 2
23006009-6: RNCC: 5 | RNVC: 2
EB65-113: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-401-3688
Flush Catch

144013688
NO PRIMARY REF14-401-3688: RNCC: 3 | RNVC: 2
29762704: RNCC: 5 | RNVC: 9

5 Jun 1985

5340-14-475-7121
Plug Button

144757121
NO PRIMARY REF14-475-7121: RNCC: 3 | RNVC: 2
0411-0-87: RNCC: 5 | RNVC: 2

26 Apr 1995

5340-14-385-2350
Butt Hinge

143852350
72-7-3325: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-448-7462
Plug Button

144487462
223023: RNCC: 3 | RNVC: 9
RAB9161: RNCC: 5 | RNVC: 2
BOUCHON HP 7/16 PR.DETENDEUR: RNCC: 5 | RNVC: 9

10 Jul 1991

5340-14-405-0477
Rim Latch Set

144050477
NO PRIMARY REF14-405-0477: RNCC: 3 | RNVC: 2
5636-3: RNCC: 5 | RNVC: 9

20 Nov 1985

5340-14-336-3993
T Plate

143363993
330A58-3713-00: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-429-7483
Flush Catch Claw

144297483
20124743: RNCC: 3 | RNVC: 2
20124743: RNCC: 3 | RNVC: 2
20124743: RNCC: 3 | RNVC: 9
85-693-8097: RNCC: 6 | RNVC: 9

8 Feb 1989

5340-14-345-7878
Bumper

143457878
0508: RNCC: 3 | RNVC: 2
U07404-11: RNCC: 5 | RNVC: 2
3036555R1: RNCC: 5 | RNVC: 2

5 Oct 1977

5340-14-531-4907
Mounting Bracket

145314907
858-002-661-0: RNCC: 3 | RNVC: 2

21 Aug 2002

5340-14-531-2135
Mounting Bracket

145312135
341A54-1528-20: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-307-5080
Loop Clamp

143075080
240-070-25314: RNCC: 3 | RNVC: 2
E4M704-60-940: RNCC: 3 | RNVC: 2
25314: RNCC: 5 | RNVC: 2
HB25314: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-471-6751
Access Cover

144716751
0910-607-110A: RNCC: 3 | RNVC: 2

7 Sep 1994

5340-14-404-6805
Pipe Hanger

144046805
365A81-0274-21: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-374-5021
Angle Bracket

143745021
341A66-6016-20: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-302-0116
Angle Bracket

143020116
A10-19-415-64-0: RNCC: 3 | RNVC: 2
A10-19-415-64-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-382-5128
Butt Hinge

143825128
NO PRIMARY REF14-382-5128: RNCC: 3 | RNVC: 2
20684033: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-407-4539
Mounting Plate

144074539
3511 191 50941: RNCC: 3 | RNVC: 2
3511 191 50941: RNCC: 5 | RNVC: 2
3511-191-50941: RNCC: 5 | RNVC: 2

12 Feb 1986

5340-14-482-5144
Pipe Hanger

144825144
PM1A522134001: RNCC: 3 | RNVC: 2
PM1A522134001: RNCC: 5 | RNVC: 2

11 Jul 1996

5340-14-533-9809
Threaded Rod End

145339809
M33014660-7: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-279-1706
Retaining Strap

142791706
201073: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-543-5672
Angle Bracket

145435672
US1105-0-A: RNCC: 3 | RNVC: 2

23 Nov 2004

5340-14-472-9927
Mounting Bracket

144729927
27108374-4: RNCC: 3 | RNVC: 2

23 Nov 1994

5340-14-433-2937
Angle Bracket

144332937
320-563-701-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-14-362-3796
Anchor Strap

143623796
A99-4-2: RNCC: 3 | RNVC: 2
A99-4-2: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-512-8181
Loop Clamp

145128181
205236: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-261-9382
Retaining Strap

142619382
15913126: RNCC: 3 | RNVC: 2
15913126: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-504-1532
Mounting Bracket

145041532
009389019R: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-472-3422
Retaining Band

144723422
14121: RNCC: 3 | RNVC: 2

19 Oct 1994

5340-14-546-6878
Access Cover

145466878
5010616915: RNCC: 3 | RNVC: 2

2 Aug 2005

5340-14-388-4450
Control Rod

143884450
01019001300: RNCC: 3 | RNVC: 2
010190013: RNCC: 5 | RNVC: 2

3 Nov 1983

5340-14-359-1154
Angle Bracket

143591154
A11A234160030: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-482-0911
Mounting Bracket

144820911
22097204: RNCC: 3 | RNVC: 2
22097204: RNCC: 5 | RNVC: 9

20 Jun 1996

5340-14-340-4636
Retaining Band

143404636
49882BIS: RNCC: 3 | RNVC: 9
49882BIS: RNCC: 5 | RNVC: 9

14 Feb 1977

5340-14-548-2412
Mounting Bracket

145482412
1SH41806791: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-14-452-3640
Block Clamp

144523640
11111556042: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-496-1411
Rod End Clevis

144961411
66901-0: RNCC: 3 | RNVC: 2
F300 0T 020 9546: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-307-0306
Bow Handle

143070306
104016: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-522-6857
Pipe Hanger

145226857
202217: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-14-438-6167
Handwheel

144386167
853-300-537-0: RNCC: 3 | RNVC: 2

28 Mar 1990

5340-14-368-9357
Plug Button

143689357
BP5295009: RNCC: 3 | RNVC: 2
BP5295-009: RNCC: 5 | RNVC: 2

10 Mar 1981

5340-14-296-1210
Bumper

142961210
341A22-1032-20: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-332-1270
Access Cover

143321270
413-10540-000: RNCC: 3 | RNVC: 2
413-10540-000: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-493-2872
Strap Fastener Loop

144932872
143478: RNCC: 3 | RNVC: 9
143478: RNCC: 5 | RNVC: 9
F300 0T 011 9584: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-374-9669
Quick Release Pin

143749669
7-090-14-1842: RNCC: 3 | RNVC: 2
7090-14-1842: RNCC: 5 | RNVC: 2
85-689-7998: RNCC: 6 | RNVC: 9

30 Jan 1982

5340-14-361-2588
Retaining Strap

143612588
Q20234-85: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-477-0367
Access Cover

144770367
23CEFL312121001E-PL1/4+4/4-TAPE: RNCC: 3 | RNVC: 2
23CEFM312121101B-PL1/4+4/4-TAPE: RNCC: 5 | RNVC: 2
RAB8528: RNCC: 5 | RNVC: 2

19 Jul 1995

5340-14-307-5164
Plug Button

143075164
9949998: RNCC: 3 | RNVC: 9
155S9-16D: RNCC: 5 | RNVC: 9
9-94-99-98A: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-280-4397
Bumper

142804397
23005581: RNCC: 3 | RNVC: 2
23005581-3: RNCC: 5 | RNVC: 2
EA102-125: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-374-2244
Locking Stay

143742244
24-7-3301: RNCC: 3 | RNVC: 2
2473301: RNCC: 5 | RNVC: 2

8 Dec 1981

5340-14-398-6441
Webbing Strap

143986441
E96-4M-B-307-1-30CM: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-297-1354
Loop Clamp

142971354
MY20515-012: RNCC: 3 | RNVC: 2
MY20-515-012: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-402-3648
Rod End Clevis

144023648
332A84-1121-20: RNCC: 3 | RNVC: 2

3 Jul 1985

5340-14-438-8402
Bow Handle

144388402
87-47-215-35: RNCC: 3 | RNVC: 2
RAR3467: RNCC: 5 | RNVC: 2

9 Apr 1990

5340-14-381-3160
Mounting Plate

143813160
2206-443A461: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-498-6834
Mounting Bracket

144986834
5000607421: RNCC: 3 | RNVC: 2
5000607421: RNCC: 5 | RNVC: 9
F300 0T 007 6537: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-518-1074
Mounting Bracket

145181074
5000419431: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-545-2984
Mounting Bracket

145452984
S306A4100101: RNCC: 3 | RNVC: 2

1 Apr 2005

5340-14-380-4840
Angle Bracket

143804840
BAZ0873: RNCC: 3 | RNVC: 2

29 Nov 1982

5340-14-462-0613
Mounting Plate

144620613
320499: RNCC: 3 | RNVC: 2
320499: RNCC: 5 | RNVC: 9

31 Mar 1993

5340-14-440-5614
Mounting Plate

144405614
061269239: RNCC: 3 | RNVC: 9
269239: RNCC: 5 | RNVC: 2

17 Jul 1990

5340-14-529-0006
Access Cover

145290006
56263352: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-14-484-9014
Metal Grille

144849014
189307-210: RNCC: 3 | RNVC: 9

12 Dec 1996

5340-14-444-9765
Detent Plunger

144449765
11-956-000: RNCC: 3 | RNVC: 2
11-956-000: RNCC: 5 | RNVC: 9

30 Jan 1991

5340-14-454-5180
Loop Clamp

144545180
16983857: RNCC: 3 | RNVC: 2

2 Apr 1992

5340-14-494-6342
Access Cover

144946342
10050386: RNCC: 3 | RNVC: 2
F300 0T 017 6779: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-540-5638
Angle Bracket

145405638
50108435: RNCC: 3 | RNVC: 2

6 Apr 2004

5340-14-465-0196
Mounting Bracket

144650196
MB1415F00: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-508-0830
Butt Hinge

145080830
4773921080: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-310-5636
Access Cover

143105636
1011034903: RNCC: 3 | RNVC: 2
1030-41: RNCC: 5 | RNVC: 2
AC30-924: RNCC: 5 | RNVC: 2
720073: RNCC: 5 | RNVC: 9
DAH1011034903: RNCC: 5 | RNVC: 9
062720073: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-548-5652
Mounting Bracket

145485652
S45091080: RNCC: 3 | RNVC: 2
5001864925: RNCC: 3 | RNVC: 2

26 Jan 2006

5340-14-535-7692
Access Cover

145357692
61010841AA: RNCC: 3 | RNVC: 2

25 Jun 2003

5340-14-483-0152
Pipe Hanger

144830152
PM1A726112131: RNCC: 3 | RNVC: 2
PM1A726112131: RNCC: 5 | RNVC: 2

1 Aug 1996

5340-14-548-6117
Mounting Bracket

145486117
RA1A704816009: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-360-8106
Retaining Strap

143608106
160G60: RNCC: 3 | RNVC: 2
BAZ5223: RNCC: 5 | RNVC: 2

19 Dec 1979

5340-14-460-8655
Synchro Clamp

144608655
3207-8: RNCC: 3 | RNVC: 2

10 Feb 1993

5340-14-550-4749
Pipe Hanger

145504749
RA1B701486581A1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-349-3030
Mending Plate

143493030
127994: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-367-4004
Bow Handle

143674004
15451689: RNCC: 3 | RNVC: 2
15451689: RNCC: 5 | RNVC: 2
15451689: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-430-9439
Angle Bracket

144309439
G230028-3: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-14-477-2158
Rod End Connector

144772158
RA1M239650341: RNCC: 3 | RNVC: 2

2 Aug 1995

5340-14-526-0313
Access Cover

145260313
103-24-65-3: RNCC: 3 | RNVC: 2
103-24-65-3: RNCC: 5 | RNVC: 2

28 Jun 2001

5340-14-551-4235
Mounting Bracket

145514235
T533A1002215: RNCC: 3 | RNVC: 2

20 Sep 2006

5340-14-455-7472
Mounting Bracket

144557472
051310100: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-449-3197
Runner

144493197
569B005: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-383-2110
Quick Release Pin

143832110
625C6T26: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-535-2559
Mounting Bracket

145352559
6501BRC120: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-533-4272
Mounting Bracket

145334272
F1262288: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-544-4417
Stand Base

145444417
999999-121: RNCC: 3 | RNVC: 2
112006025001A: RNCC: 3 | RNVC: 9

31 Jan 2005

5340-14-367-7726
Pipe Hanger

143677726
303-143-003-0: RNCC: 3 | RNVC: 2
303-143-004-0: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-464-1717
Locking Stay

144641717
CEFM-331-300-291: RNCC: 3 | RNVC: 2
RAB1437: RNCC: 5 | RNVC: 2
CEFM-331-300-274IND:D: RNCC: 5 | RNVC: 2

21 Jul 1993

5340-14-483-8402
Plug Button

144838402
W1-302: RNCC: 3 | RNVC: 2
91459687: RNCC: 5 | RNVC: 2
91459687: RNCC: 5 | RNVC: 2
W1-302: RNCC: 5 | RNVC: 9

3 Oct 1996

5340-14-212-1669
Bumper

142121669
321A21-0347-00: RNCC: 3 | RNVC: 2
85-691-2220: RNCC: 6 | RNVC: 9

5 Jul 1980

5340-14-305-4056
Loop Clamp

143054056
30S9-5: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-307-4413
Access Cover

143074413
2-8022: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-235-4535
Mending Plate

142354535
392T213-2: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-501-7668
Bumper

145017668
10345677: RNCC: 3 | RNVC: 2

5 Nov 1997

5340-14-507-6456
Cover Strip

145076456
96183045: RNCC: 3 | RNVC: 2

7 Aug 1998

5340-14-371-6266
Quick Release Pin

143716266
034540: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-509-1912
Access Cover

145091912
ER4032: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-249-9289
Support Hook

142499289
38809: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-478-3357
Webbing Strap

144783357
31015114: RNCC: 3 | RNVC: 2
89303059: RNCC: 5 | RNVC: 2

25 Oct 1995

5340-14-445-3863
Anchor Strap

144453863
BLC235408: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-14-241-1727
Runner

142411727
STE156289J: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-427-5114
Utility Access Door

144275114
NO PRIMARY REF14-427-5114: RNCC: 3 | RNVC: 2
20549: RNCC: 5 | RNVC: 9

20 Oct 1988

5340-14-389-8285
Angle Bracket

143898285
837048/003: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-443-0469
Block Clamp

144430469
11211556067: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-14-222-0156
Threaded Rod End

142220156
4205DGJ: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-418-4447
Angle Bracket

144184447
004730990G: RNCC: 3 | RNVC: 2

26 Aug 1987

5340-14-456-8886
Retaining Band

144568886
MAT211-0018F6: RNCC: 3 | RNVC: 2

28 Jul 1992

5340-14-433-1508
Support Hook

144331508
NO PRIMARY REF14-433-1508: RNCC: 3 | RNVC: 2
003135004: RNCC: 5 | RNVC: 9
3135004: RNCC: 5 | RNVC: 9

11 Jul 1989

5340-14-525-6358
Loop Clamp

145256358
20 238 140 1020: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-528-9859
Mounting Bracket

145289859
700562: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-14-468-4101
Utility Access Door

144684101
A10227-02-0000P009: RNCC: 3 | RNVC: 2
411401-001: RNCC: 5 | RNVC: 9

23 Feb 1994

5340-14-523-6759
Loop Clamp

145236759
J928989: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-531-9769
Leakproof Seal Plug

145319769
6940448: RNCC: 3 | RNVC: 2
6940448: RNCC: 5 | RNVC: 2

2 Oct 2002

5340-14-339-3205
Retaining Strap

143393205
194117: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-475-6592
Retaining Strap

144756592
29079692: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-14-370-0378
Retaining Strap

143700378
MAS701: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-329-2476
Angle Bracket

143292476
F10A705600320: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-308-8277
Mounting Plate

143088277
104009: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-546-7376
Mounting Bracket

145467376
S257A7011110: RNCC: 3 | RNVC: 2

9 Aug 2005

5340-14-448-7840
Mounting Plate

144487840
721B8601: RNCC: 3 | RNVC: 2
89469874: RNCC: 5 | RNVC: 2

10 Jul 1991

5340-14-503-8913
Blank Panel

145038913
GFACA27: RNCC: 3 | RNVC: 2
F0023410: RNCC: 5 | RNVC: 9

4 Feb 1998

5340-14-515-4374
Mounting Plate

145154374
34RB3440: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-537-4423
Retaining Strap

145374423
898057: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-547-9528
Angle Bracket

145479528
02419803300: RNCC: 3 | RNVC: 2
PC23407: RNCC: 5 | RNVC: 2

29 Nov 2005

5340-14-291-2347
Luggage Handle

142912347
100271-101005: RNCC: 3 | RNVC: 2
120340: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-544-5355
Mounting Bracket

145445355
N54378: RNCC: 3 | RNVC: 2

9 Feb 2005

5340-14-500-9776
Swivel Caster

145009776
A69991900000: RNCC: 3 | RNVC: 2
F300 0T 024 9989: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-449-3231
Plate Spacer

144493231
582A001: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-384-6867
Angle Bracket

143846867
16497182: RNCC: 3 | RNVC: 2

2 Jun 1983

5340-14-549-8877
Angle Bracket

145498877
2199867: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-501-7035
Mounting Bracket

145017035
45281106: RNCC: 3 | RNVC: 2
45281106: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-411-7080
Surface Bolt

144117080
4771802170: RNCC: 3 | RNVC: 2

27 Aug 1986

5340-14-487-6374
Mounting Plate

144876374
009251226P: RNCC: 3 | RNVC: 2

16 Apr 1997

5340-14-529-7504
Loop Clamp

145297504
COU002552051121: RNCC: 3 | RNVC: 2

9 Apr 2002

5340-14-549-8094
Self-Locking Insert

145498094
2092663: RNCC: 3 | RNVC: 2

15 May 2006

5340-14-550-4748
Pipe Hanger

145504748
RA1B701322041N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-502-6093
Mounting Bracket

145026093
5010165044: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-403-0151
Runner

144030151
8813838109: RNCC: 3 | RNVC: 2

25 Jul 1985

5340-14-508-2490
Angle Bracket

145082490
5010118693: RNCC: 3 | RNVC: 2
317220A21241: RNCC: 5 | RNVC: 2

2 Sep 1998

5340-14-512-5729
Mounting Bracket

145125729
38730566: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-481-0520
Butt Hinge

144810520
92 86 32: RNCC: 3 | RNVC: 2

18 Apr 1996

5340-14-339-3273
Webbing Strap

143393273
130340: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-355-1810
Retaining Strap

143551810
5000496629: RNCC: 3 | RNVC: 2
5000496629: RNCC: 5 | RNVC: 9

19 Mar 1979

5340-14-500-4528
Mounting Plate

145004528
E63206500000: RNCC: 3 | RNVC: 2
F300 0T 024 4697: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-281-3850
Loop Clamp

142813850
4304688: RNCC: 3 | RNVC: 2
4304688: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-502-6095
Mounting Bracket

145026095
5010165199: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-549-9602
Mounting Bracket

145499602
2092351-001: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-367-2585
Anchor Strap

143672585
508100-09: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-541-5012
Loop Clamp

145415012
SGL10-16A2: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-341-5547
Butt Hinge

143415547
321A58-0811-101: RNCC: 3 | RNVC: 2
85-800-3550: RNCC: 6 | RNVC: 9

16 Mar 1977

5340-14-396-8291
Loop Clamp

143968291
15363-06: RNCC: 3 | RNVC: 2
15363-06: RNCC: 5 | RNVC: 9
15363-06: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-519-3282
Loop Clamp

145193282
ASNA0022-71N18: RNCC: 1 | RNVC: 2
61300005018: RNCC: 3 | RNVC: 2
ASNA0022-71N18: RNCC: 3 | RNVC: 2
A0022-71N18: RNCC: 5 | RNVC: 2
ASNA0022-71N18: RNCC: 5 | RNVC: 2
A0022-71N18: RNCC: 5 | RNVC: 2
ASNA0022-71N18: RNCC: 5 | RNVC: 2

15 Mar 2000

5340-14-316-2457
Support Hook

143162457
121A71-311-19-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-391-7879
Clamp Bolt Assembly

143917879
V2PM5011-119279: RNCC: 3 | RNVC: 2
V2PM5011-119279: RNCC: 5 | RNVC: 2

21 Mar 1984

5340-14-395-3108
Rod End Clevis

143953108
70-421L33-57: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-386-4376
Pipe Hanger

143864376
360A61-1134-20: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-503-1117
Pipe Hanger

145031117
E4M705-31-09: RNCC: 3 | RNVC: 2
85-694-2443: RNCC: 6 | RNVC: 9

7 Jan 1998

5340-14-400-1696
Loop Clamp

144001696
FG1C703-234: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-438-9749
Mounting Bracket

144389749
332A27-2926-00: RNCC: 3 | RNVC: 2

11 Apr 1990

5340-14-471-6586
Mounting Bracket

144716586
002846212J: RNCC: 3 | RNVC: 2
J28462-12: RNCC: 5 | RNVC: 2

7 Sep 1994

5340-14-264-1707
Loop Clamp

142641707
55217-316DB: RNCC: 3 | RNVC: 2
55217-316-000DB: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-348-4971
Clamping Catch

143484971
GE.40-FZB: RNCC: 3 | RNVC: 2
GE40-2CB: RNCC: 5 | RNVC: 2
GE40FZB: RNCC: 5 | RNVC: 2
1664-007: RNCC: 5 | RNVC: 2
2778-205: RNCC: 5 | RNVC: 2
896811: RNCC: 5 | RNVC: 2

29 Mar 1978

5340-14-275-6695
Threaded Rod End

142756695
NO PRIMARY REF14-275-6695: RNCC: 3 | RNVC: 2
18111753: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-370-7404
Lock-Release Lever

143707404
676-43630-80: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-484-2774
Loop Clamp

144842774
51200005022: RNCC: 3 | RNVC: 2
A0021-10N22: RNCC: 5 | RNVC: 2
A0021-10N22: RNCC: 5 | RNVC: 2
ASNA0021-10N22: RNCC: 5 | RNVC: 2
10N22: RNCC: 5 | RNVC: 2

31 Oct 1996

5340-14-218-5745
Loop Clamp

142185745
3160S73-08-701: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-384-3198
Loop Clamp

143843198
92853241: RNCC: 3 | RNVC: 2
9-28SE24: RNCC: 5 | RNVC: 2

4 May 1983

5340-14-223-6867
Webbing Strap

142236867
JEA20-82: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-257-1085
Rod End Clevis

142571085
330A76-1060-20: RNCC: 3 | RNVC: 2
330A76-1060-2000: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-490-3735
Loop Clamp

144903735
NO PRIMARY REF14-490-3735: RNCC: 3 | RNVC: 2
NNP5340844553626: RNCC: 5 | RNVC: 9

24 Sep 1997

5340-14-440-5922
Retaining Strap

144405922
10-89-026D2: RNCC: 3 | RNVC: 2

18 Jul 1990

5340-14-465-4812
Mounting Bracket

144654812
365A21-3186-24: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-533-1239
Mounting Plate

145331239
459-11554-000: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-14-468-0514
Loop Clamp

144680514
PNE207003-001: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-544-3016
Butt Hinge

145443016
708120S112-22A: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-14-446-6139
Angle Bracket

144466139
262-10-21570-14: RNCC: 3 | RNVC: 2

5 Apr 1991

5340-14-213-9264
Synchro Clamp

142139264
S2154-1DG: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-296-3689
Angle Bracket

142963689
CAP10-50-66-03: RNCC: 3 | RNVC: 9

1 Jan 1973

5340-14-423-9094
Anchor Strap

144239094
5429-41: RNCC: 3 | RNVC: 2
5429-4100: RNCC: 5 | RNVC: 2
1-013061: RNCC: 5 | RNVC: 2

5 May 1988

5340-14-391-7906
Runner

143917906
V2PM5013-119807: RNCC: 3 | RNVC: 2
V2PM5013-119807: RNCC: 5 | RNVC: 2

21 Mar 1984

5340-14-387-4478
Angle Bracket

143874478
20-01-175: RNCC: 3 | RNVC: 2
20-01-175: RNCC: 3 | RNVC: 9

15 Sep 1983

5340-14-437-3609
Loop Clamp

144373609
201492-04725: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-304-8133
Bumper

143048133
NO PRIMARY REF14-304-8133: RNCC: 3 | RNVC: 2
18513: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-300-4101
Bow Handle

143004101
14-104-200-15: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-234-5847
Rod End Clevis

142345847
321A27-0432-20: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-473-6513
Synchro Clamp

144736513
332A31-1870-21: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-553-4502
Angle Bracket

145534502
DE2B236600407SPL: RNCC: 3 | RNVC: 2

4 Apr 2007

5340-14-455-4010
Thumb Latch

144554010
45594211: RNCC: 3 | RNVC: 2
45594211: RNCC: 5 | RNVC: 9

21 May 1992

5340-14-411-5026
Rim Lock

144115026
321: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-434-9097
Plate Spacer

144349097
018291A01TRA: RNCC: 3 | RNVC: 2
018291A: RNCC: 5 | RNVC: 2

9 Oct 1989

5340-14-476-0109
Webbing Strap

144760109
A63681: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-509-1607
Mounting Bracket

145091607
ER3224: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-350-4764
Bridge Clamp

143504764
211806: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-381-3456
Bumper

143813456
48814: RNCC: 3 | RNVC: 9

25 Jan 1983

5340-14-314-5167
Loop Clamp

143145167
9408401: RNCC: 3 | RNVC: 9

1 Jan 1974

5340-14-379-8522
Webbing Strap

143798522
052212: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-433-9056
Mounting Plate

144339056
RP988649/2: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-14-397-4150
Lock Bolt

143974150
C37094: RNCC: 3 | RNVC: 9
5516003278: RNCC: 5 | RNVC: 2
1192020: RNCC: 5 | RNVC: 2
37094: RNCC: 5 | RNVC: 9

14 Dec 1984

5340-14-333-3428
Retaining Strap

143333428
52321: RNCC: 3 | RNVC: 9

2 Jul 1975

5340-14-482-5099
Threaded Rod End

144825099
PM1A725374355: RNCC: 3 | RNVC: 2
PM1A725374355: RNCC: 5 | RNVC: 2

11 Jul 1996

5340-14-483-9374
Mounting Bracket

144839374
319708: RNCC: 3 | RNVC: 2
319708: RNCC: 5 | RNVC: 9

10 Oct 1996

5340-14-257-7547
Retaining Strap

142577547
204449: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-436-8629
Section Block Clamp

144368629
DA2C203637001: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-408-0280
Mounting Plate

144080280
20722242-4: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-413-9692
Webbing Strap

144139692
ST406M32G14: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-519-5569
Compression Cup

145195569
802414: RNCC: 3 | RNVC: 9

22 Mar 2000

5340-14-380-8321
Angle Bracket

143808321
121A63-260-32-0: RNCC: 3 | RNVC: 2
121A63-260-32-0: RNCC: 5 | RNVC: 2

14 Dec 1982

5340-14-495-3047
Mounting Bracket

144953047
TB1020101F307: RNCC: 3 | RNVC: 2
F300 0T 018 9941: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-539-9714
Pipe Hanger

145399714
RA1B703146281A1: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-350-7961
Loop Clamp

143507961
620-854-939-0: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-381-1564
Retaining Strap

143811564
525799: RNCC: 3 | RNVC: 2
00525799: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-537-1105
Detent Plunger

145371105
8025911K00: RNCC: 3 | RNVC: 2
AP015189400: RNCC: 5 | RNVC: 2
23784: RNCC: 5 | RNVC: 2

1 Oct 2003

5340-14-323-4800
Threaded Rod End

143234800
0268100570: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-550-7732
Mounting Bracket

145507732
5010248680: RNCC: 3 | RNVC: 2

13 Jul 2006

5340-14-475-9504
Door Handle

144759504
8289900: RNCC: 3 | RNVC: 2

12 May 1995

5340-14-478-7582
Anchor Strap

144787582
5010099466: RNCC: 3 | RNVC: 2

20 Nov 1995

5340-14-517-5285
Access Cover

145175285
47148636: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-555-7737
Plug Button

145557737
0164040190: RNCC: 3 | RNVC: 2

13 Dec 2007

5340-14-551-2923
Angle Bracket

145512923
RA1M705626611A1: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-555-7138
Mounting Plate

145557138
0177550190: RNCC: 3 | RNVC: 2

10 Dec 2007

5340-14-551-3429
Angle Bracket

145513429
RA1M701186195: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-347-8188
Access Cover

143478188
024TQ105PL2: RNCC: 3 | RNVC: 2

1 Mar 1978

5340-14-248-9573
Rod End Connector

142489573
0135D315: RNCC: 3 | RNVC: 9
0135D315: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-436-2106
Mounting Plate

144362106
DA2C228653A1: RNCC: 3 | RNVC: 2

6 Dec 1989

5340-14-434-3546
Snap Hook

144343546
834005: RNCC: 3 | RNVC: 2
M4ZS301D2400: RNCC: 5 | RNVC: 2

20 Sep 1989

5340-14-364-7981
Access Cover

143647981
211007: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-14-526-8273
Mounting Plate

145268273
5010429874: RNCC: 3 | RNVC: 2

7 Sep 2001

5340-14-361-8530
Loop Clamp

143618530
51200005023: RNCC: 3 | RNVC: 2
10N23: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-14-540-5954
Eye Hook

145405954
025014: RNCC: 3 | RNVC: 2

7 Apr 2004

5340-14-439-5224
Butt Hinge

144395224
TB10311: RNCC: 3 | RNVC: 2

11 May 1990

5340-14-486-2101
Loop Clamp

144862101
64813-9: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-300-0892
Rod End Connector

143000892
556161: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-522-1634
Clamping Catch

145221634
4FE201PN: RNCC: 3 | RNVC: 2

5 Oct 2000

5340-14-541-5895
Bow Handle

145415895
908360: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-202-8393
Bow Handle

142028393
0000360976: RNCC: 3 | RNVC: 2
0000360976: RNCC: 5 | RNVC: 9
360976: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-14-502-8412
Mounting Bracket

145028412
9R5159: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-501-1547
Access Cover

145011547
014-014-237: RNCC: 3 | RNVC: 2
014.014.237: RNCC: 3 | RNVC: 2
F300 0T 025 1949: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-248-7831
Leaf Spring

142487831
E4M452-12: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-393-1656
Loop Clamp

143931656
NO PRIMARY REF14-393-1656: RNCC: 3 | RNVC: 2
CA2362-003: RNCC: 5 | RNVC: 9

12 Apr 1984

5340-14-528-3171
Butt Hinge

145283171
312-00293-003: RNCC: 3 | RNVC: 2

21 Jan 2002

5340-14-551-2014
Bumper

145512014
F5-16-25-19: RNCC: 3 | RNVC: 2

6 Sep 2006

5340-14-413-9184
Anchor Strap

144139184
23108297-6: RNCC: 3 | RNVC: 2
23108297: RNCC: 5 | RNVC: 2

22 Jan 1987

5340-14-548-6648
Mounting Plate

145486648
P-15635A/FU-80-LTC-2250/07812: RNCC: 1 | RNVC: 2
07812: RNCC: 3 | RNVC: 2
BPC-15PT000G6791A-N1320-07812: RNCC: 5 | RNVC: 2
07812: RNCC: 5 | RNVC: 2

30 Jan 2006

5340-14-548-2222
Door Hook And Eye

145482222
8996451746-30/0: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-14-550-3431
Butt Hinge

145503431
40-1-3767: RNCC: 3 | RNVC: 2

16 Jun 2006

5340-14-214-3171
Turnbuckle Body

142143171
STI819S1-3: RNCC: 3 | RNVC: 2
STI275S1-10: RNCC: 5 | RNVC: 2
STI819S1-3: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-348-8130
Quick Release Pin

143488130
121ECRT83-022A1: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-14-364-9163
Angle Bracket

143649163
8567-1: RNCC: 3 | RNVC: 2
8567-1: RNCC: 5 | RNVC: 2
85-800-7908: RNCC: 6 | RNVC: 9

2 Sep 1980

5340-14-315-9429
Snap Hook

143159429
41-40-50-1: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-432-8463
Mounting Bracket

144328463
NO PRIMARY REF14-432-8463: RNCC: 3 | RNVC: 2
540067: RNCC: 5 | RNVC: 9
540067: RNCC: 5 | RNVC: 9

28 Jun 1989

5340-14-297-5779
Detent Plunger

142975779
79265-272: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-259-9933
Loop Clamp

142599933
55212-140BGZ: RNCC: 3 | RNVC: 2
55212-140-000BGZ: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-339-4977
Angle Bracket

143394977
M3R702-332: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-419-7206
Loop Clamp

144197206
004887: RNCC: 3 | RNVC: 2
4887: RNCC: 5 | RNVC: 2
004860-10: RNCC: 5 | RNVC: 2

5 Nov 1987

5340-14-460-0816
Mounting Bracket

144600816
PM1A725632201A1: RNCC: 3 | RNVC: 2
PM1A725632201A1: RNCC: 5 | RNVC: 2

7 Jan 1993

5340-14-450-3331
Access Cover

144503331
79127705: RNCC: 3 | RNVC: 2
79127705: RNCC: 5 | RNVC: 9

25 Sep 1991

5340-14-440-6776
Mounting Bracket

144406776
332A84-1013-24: RNCC: 3 | RNVC: 2

18 Jul 1990

5340-14-430-9359
Angle Bracket

144309359
G230011-03: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-14-390-1574
Mending Plate

143901574
366A61-3100-37: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-535-5235
Mounting Plate

145355235
355A34-1045-21: RNCC: 3 | RNVC: 2

31 May 2003

5340-14-530-6219
Mounting Bracket

145306219
176E077-01: RNCC: 3 | RNVC: 2
176E077-01: RNCC: 5 | RNVC: 9

26 Jun 2002

5340-14-528-0740
Mounting Bracket

145280740
341A62-5114-20: RNCC: 3 | RNVC: 2

12 Dec 2001

5340-14-389-5121
Pipe Hanger

143895121
365A75-2328-20: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-363-0936
Butt Hinge

143630936
CD.401-ZI: RNCC: 3 | RNVC: 2
CD401ZI: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-14-485-0712
Corner Brace

144850712
332A52-1352-20: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-14-393-6305
Mounting Plate

143936305
4140-18: RNCC: 3 | RNVC: 2

7 Jun 1984

5340-14-346-3108
Retaining Strap

143463108
C58000-279: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-452-2826
Mounting Bracket

144522826
365A52-1338-05: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-521-5860
Mounting Plate

145215860
IF223-374: RNCC: 3 | RNVC: 9

23 Aug 2000

5340-14-254-9130
Bumper

142549130
E2527RP: RNCC: 3 | RNVC: 2
21111-01-07: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-231-9416
Loop Clamp

142319416
613-558-505-0: RNCC: 3 | RNVC: 2
8002-900-0: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-550-9703
Access Cover

145509703
10454-62040/6: RNCC: 3 | RNVC: 2
28081819-0: RNCC: 5 | RNVC: 2

4 Aug 2006

5340-14-360-3017
Retaining Clip

143603017
K20: RNCC: 3 | RNVC: 2
VDPV5290: RNCC: 5 | RNVC: 2
4084200001: RNCC: 5 | RNVC: 2
940-025-02: RNCC: 5 | RNVC: 2

23 Nov 1979

5340-14-521-7002
Mounting Plate

145217002
160-88994-02: RNCC: 3 | RNVC: 2

6 Sep 2000

5340-14-473-6471
Mounting Bracket

144736471
332A22-1401-25: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-542-3633
Mounting Bracket

145423633
27557116-2: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-14-418-8729
Rod End Connector

144188729
DA1D292343567: RNCC: 3 | RNVC: 2

16 Sep 1987

5340-14-501-2671
Mounting Plate

145012671
704-001-036: RNCC: 3 | RNVC: 2
704.001.036: RNCC: 3 | RNVC: 2
F300 0T 025 3077: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-224-8760
Threaded Rod End

142248760
235051: RNCC: 3 | RNVC: 2
SOG235051: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-477-8331
Clamp Bolt Assembly

144778331
1884-07-41-01: RNCC: 3 | RNVC: 2

27 Sep 1995

5340-14-459-7354
Loop Holder

144597354
LN321022REP15LAG3-L32X32X3: RNCC: 3 | RNVC: 2
RAB0202: RNCC: 5 | RNVC: 2

15 Dec 1992

5340-14-545-4141
Bridge Clamp

145454141
9012-121-000A: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-359-0721
Pipe Hanger

143590721
A11A221372030: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-371-7499
Access Cover

143717499
EA1M110-50-861: RNCC: 3 | RNVC: 2
85-691-7887: RNCC: 6 | RNVC: 9

5 Aug 1981

5340-14-396-2882
Access Cover

143962882
NO PRIMARY REF14-396-2882: RNCC: 3 | RNVC: 2
D30-28114: RNCC: 5 | RNVC: 9
28114: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-373-8217
Rim Lock Set

143738217
NO PRIMARY REF14-373-8217: RNCC: 3 | RNVC: 2
6600-04MNFH009: RNCC: 5 | RNVC: 9

13 Nov 1981

5340-14-407-2082
Strap Hinge

144072082
9037-31: RNCC: 3 | RNVC: 2
9251090380: RNCC: 5 | RNVC: 2

12 Feb 1986

5340-14-399-9433
Rod End Clevis

143999433
477571Y: RNCC: 3 | RNVC: 2
27102053-6: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-411-1525
Mounting Plate

144111525
332A34-1060-20: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-509-8010
Runner

145098010
1600-105-313-01: RNCC: 3 | RNVC: 2
5340AA0011978: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-382-4152
Buckle

143824152
13311-150-113: RNCC: 3 | RNVC: 2
13311-150-013F: RNCC: 5 | RNVC: 2

17 Feb 1983

5340-14-367-4617
Angle Bracket

143674617
A11A221260330: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-401-7396
Surface Bolt

144017396
987-180: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-528-4407
Clamping Catch

145284407
5815167Z00: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-366-3821
Retaining Strap

143663821
139014C: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-460-0824
Angle Bracket

144600824
PM1A726145001: RNCC: 3 | RNVC: 2
PM1A726145001: RNCC: 5 | RNVC: 2

7 Jan 1993

5340-14-378-9037
Lock-Release Lever

143789037
0034176058: RNCC: 3 | RNVC: 2
0034176058: RNCC: 5 | RNVC: 9
34176058: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-14-444-7211
Plate Spacer

144447211
238465: RNCC: 3 | RNVC: 2
F300 0T 006 2206: RNCC: 6 | RNVC: 9

21 Jan 1991

5340-14-541-4965
Mounting Bracket

145414965
053917: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-542-6258
Mounting Bracket

145426258
S711A4014110: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-14-553-6870
Mounting Bracket

145536870
82181058000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-464-8336
Protection Bellows

144648336
38224706: RNCC: 3 | RNVC: 2
38224706: RNCC: 5 | RNVC: 9

1 Sep 1993

5340-14-348-5835
Angle Bracket

143485835
P745051380: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-14-519-5609
Mounting Plate

145195609
9947808: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-396-3696
Runner

143963696
477015U: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-338-5924
Loop Clamp

143385924
194054: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-448-9545
Mounting Bracket

144489545
5000923975: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-14-529-0626
Mounting Bracket

145290626
10152425: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-14-329-4222
Angle Bracket

143294222
0249867150: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-362-4716
Retaining Strap

143624716
16595016: RNCC: 3 | RNVC: 2
16595016: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-553-9806
Mounting Bracket

145539806
62B7766: RNCC: 3 | RNVC: 2

6 Jun 2007

5340-14-551-3467
Angle Bracket

145513467
RA1M701836141N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-551-4122
Mending Plate

145514122
DPA3X: RNCC: 3 | RNVC: 2

18 Sep 2006

5340-14-421-1103
Buckle

144211103
18124925: RNCC: 3 | RNVC: 2

6 Jan 1988

5340-14-414-5698
Retaining Strap

144145698
ST400S60P99: RNCC: 3 | RNVC: 2
BJQS60P99: RNCC: 3 | RNVC: 2

11 Feb 1987

5340-14-516-6082
Lever Bracket

145166082
61946: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-14-512-5026
Rim Latch

145125026
93.314: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-445-4487
Angle Bracket

144454487
MC1011F00: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-489-3651
Runner

144893651
539562: RNCC: 3 | RNVC: 2
025-3-1-REP20: RNCC: 5 | RNVC: 2

10 Jul 1997

5340-14-437-9477
Mounting Bracket

144379477
330A33-3179-20: RNCC: 3 | RNVC: 2

28 Feb 1990

5340-14-316-5227
Angle Bracket

143165227
321A26-0600-21: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-377-9371
Control Rod

143779371
710016-21061: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-536-6620
Mounting Plate

145366620
21241995-00: RNCC: 3 | RNVC: 2
21241995-4: RNCC: 5 | RNVC: 2

10 Sep 2003

5340-14-405-0176
Loop Clamp

144050176
51121905008: RNCC: 3 | RNVC: 2
24PE8: RNCC: 5 | RNVC: 2
25PE8: RNCC: 5 | RNVC: 2
51121919008: RNCC: 5 | RNVC: 2
85-693-1684: RNCC: 6 | RNVC: 9

20 Nov 1985

5340-14-490-2934
Mounting Bracket

144902934
J05085-02-0700P034: RNCC: 3 | RNVC: 2

24 Sep 1997

Load More Results