What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 38 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 38 of 446

5340-14-395-9672
Angle Bracket

143959672
210347: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-379-8523
Webbing Strap

143798523
052567: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-455-1180
Mounting Bracket

144551180
0000158225: RNCC: 3 | RNVC: 2

1 May 1992

5340-14-455-3864
Mounting Plate

144553864
16130788: RNCC: 3 | RNVC: 2

21 May 1992

5340-14-350-2730
Retaining Strap

143502730
53NC402562: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-481-2635
Turnbuckle Body

144812635
1163006030: RNCC: 3 | RNVC: 2
F300 0T 020 6321: RNCC: 5 | RNVC: 9

25 Apr 1996

5340-14-354-0598
Mending Plate

143540598
A11A224117003: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-527-5857
Access Cover

145275857
C0490S240: RNCC: 3 | RNVC: 2
C0490S240: RNCC: 5 | RNVC: 2

30 Oct 2001

5340-14-392-6765
Angle Bracket

143926765
174528: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-441-4672
Caster Frame

144414672
04111: RNCC: 3 | RNVC: 2

29 Aug 1990

5340-14-346-1672
Anchor Strap

143461672
0007010180: RNCC: 3 | RNVC: 2
0007010180: RNCC: 5 | RNVC: 9

12 Dec 1977

5340-14-450-1690
Mounting Bracket

144501690
92PD260104: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-392-9644
Mounting Plate

143929644
609494: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-501-5206
Retaining Strap

145015206
0315771090: RNCC: 3 | RNVC: 2

29 Oct 1997

5340-14-497-5614
Snap Hook

144975614
390004: RNCC: 3 | RNVC: 2
F300 0T 023 3608: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-462-0607
Access Cover

144620607
3146203: RNCC: 3 | RNVC: 2
3146203: RNCC: 5 | RNVC: 2

31 Mar 1993

5340-14-254-7768
Retaining Strap

142547768
52074: RNCC: 3 | RNVC: 9

1 Jan 1969

5340-14-529-8824
Access Cover

145298824
DA8151: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-507-2194
Access Cover

145072194
47136753: RNCC: 3 | RNVC: 2

22 Jun 1998

5340-14-266-0913
Access Cover

142660913
40319A4: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-413-7406
Rod End Clevis

144137406
ST406M21P79: RNCC: 3 | RNVC: 2

15 Jan 1987

5340-14-526-4578
Section Block Clamp

145264578
RA1M705514311: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-516-4933
Access Cover

145164933
162233004: RNCC: 3 | RNVC: 2

29 Sep 1999

5340-14-524-5212
Section Block Clamp

145245212
808925: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-541-6263
Utility Access Door

145416263
1091130: RNCC: 3 | RNVC: 2

15 Jun 2004

5340-14-522-7678
Access Cover

145227678
47220184: RNCC: 3 | RNVC: 2

22 Nov 2000

5340-14-518-2729
Access Cover

145182729
7517600: RNCC: 3 | RNVC: 2
5001838963: RNCC: 5 | RNVC: 2

2 Feb 2000

5340-14-407-9831
Plug Button

144079831
M4Z7301420501: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-505-2241
Access Cover

145052241
20061138: RNCC: 3 | RNVC: 2

13 Mar 1998

5340-14-341-1219
Pipe Hanger

143411219
17419: RNCC: 3 | RNVC: 2
01741977: RNCC: 5 | RNVC: 2

16 Mar 1977

5340-14-462-2306
Retaining Strap

144622306
T700A3013010100: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-14-507-6951
Angle Bracket

145076951
10263184: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-450-6579
Access Cover

144506579
617436: RNCC: 3 | RNVC: 2

16 Oct 1991

5340-14-229-2550
Access Cover

142292550
68280: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-435-6461
Anchor Strap

144356461
61666988: RNCC: 3 | RNVC: 9
061666988: RNCC: 5 | RNVC: 9

15 Nov 1989

5340-14-526-4537
Retaining Strap

145264537
RA1M705156411N1: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-514-6409
Bumper

145146409
5010044751: RNCC: 3 | RNVC: 2

3 Jun 1999

5340-14-459-7840
Cover Strip

144597840
TB4010211: RNCC: 3 | RNVC: 2

17 Dec 1992

5340-14-403-3660
Clamping Catch

144033660
181346: RNCC: 3 | RNVC: 2
89301853: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-408-4421
Control Rod

144084421
RSM38029: RNCC: 3 | RNVC: 2

27 Mar 1986

5340-14-459-1564
Mounting Bracket

144591564
16558896: RNCC: 3 | RNVC: 2
16558896: RNCC: 5 | RNVC: 9

19 Nov 1992

5340-14-323-7458
Angle Bracket

143237458
75998: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-345-1822
Access Cover

143451822
403620: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-415-4639
Rod End Clevis

144154639
ES42925: RNCC: 3 | RNVC: 2

18 May 1987

5340-14-508-6412
Mounting Bracket

145086412
K15241PC517A: RNCC: 3 | RNVC: 2
K15241PC500AREP17: RNCC: 5 | RNVC: 2

23 Sep 1998

5340-14-393-4334
Access Cover

143934334
0288102130: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-541-3304
Loop Clamp

145413304
24-82305: RNCC: 3 | RNVC: 2

27 May 2004

5340-14-551-3498
Angle Bracket

145513498
RA1M703846121: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-363-6866
Access Cover

143636866
26027011900: RNCC: 3 | RNVC: 2
260270119: RNCC: 5 | RNVC: 9

6 Jul 1980

5340-14-512-8175
Lock Bolt

145128175
204387: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-515-3061
Protection Bellows

145153061
0009625523: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-287-1196
Bow Handle

142871196
RI4U: RNCC: 3 | RNVC: 2
RI4U: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-399-1212
Pipe Hanger

143991212
5000783626: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-480-0285
Access Cover

144800285
39527815: RNCC: 3 | RNVC: 2
39527815: RNCC: 5 | RNVC: 9

21 Feb 1996

5340-14-550-4691
Angle Bracket

145504691
RA1B701712561A1N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-353-1447
Runner

143531447
150133: RNCC: 3 | RNVC: 2
150133: RNCC: 5 | RNVC: 2

8 Dec 1978

5340-14-383-1270
Rod End Clevis

143831270
1061170019: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-291-3997
Eye Hook

142913997
0236990340: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-359-3367
Bow Handle

143593367
16678847: RNCC: 3 | RNVC: 2

2 Oct 1979

5340-14-032-3536
Rod End Clevis

140323536
50053-1001-4010: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-319-8296
Bumper

143198296
121S83-563-02-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-466-1219
Loop Clamp

144661219
REMDCHEGZLE-SERT-81-1: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-14-430-0619
Butt Hinge

144300619
40-1-3681: RNCC: 3 | RNVC: 2
153601: RNCC: 5 | RNVC: 9
F300 0T 005 8811: RNCC: 6 | RNVC: 9

28 Feb 1989

5340-14-519-2418
Mending Plate

145192418
A10-92-200-32-0: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-529-6304
Loop Clamp

145296304
0018-3666-300: RNCC: 3 | RNVC: 2
SYB4899: RNCC: 5 | RNVC: 2

3 Apr 2002

5340-14-467-7262
Strap Fastener Loop

144677262
312-17849-501: RNCC: 3 | RNVC: 2

27 Jan 1994

5340-14-413-1547
Mounting Plate

144131547
23117683-0: RNCC: 3 | RNVC: 2
23117683: RNCC: 5 | RNVC: 2

26 Nov 1986

5340-14-336-7151
Rod End Connector

143367151
184239: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-389-9384
Retaining Strap

143899384
4-000011-000039: RNCC: 3 | RNVC: 2
4-011-0039: RNCC: 5 | RNVC: 2

26 Jan 1984

5340-14-505-9651
Strap Fastener Loop

145059651
1129D: RNCC: 3 | RNVC: 2
216160: RNCC: 5 | RNVC: 2

1 Apr 1998

5340-14-302-1214
Mending Plate

143021214
A10-74-105-20-0: RNCC: 3 | RNVC: 2
A10-74-105-20-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-297-4445
Expansion Plug

142974445
003849: RNCC: 3 | RNVC: 9

1 Jan 1973

5340-14-515-3042
Loop Clamp

145153042
0009552244: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-220-4949
Access Cover

142204949
613-990-056-0: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-511-3354
Mounting Plate

145113354
D66064: RNCC: 3 | RNVC: 2

16 Dec 1998

5340-14-523-8764
Access Cover

145238764
1001A247-001: RNCC: 3 | RNVC: 2

8 Feb 2001

5340-14-531-2161
Mounting Bracket

145312161
341A63-5077-01: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-478-6340
Rod End Clevis

144786340
307-058-005-0: RNCC: 3 | RNVC: 2

8 Nov 1995

5340-14-446-4500
Butt Hinge

144464500
0878418N01: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-14-426-6624
Shimmy Damper

144266624
A4289: RNCC: 3 | RNVC: 2
4289: RNCC: 5 | RNVC: 2
33013437: RNCC: 5 | RNVC: 2
3301343790: RNCC: 5 | RNVC: 2
89470045: RNCC: 5 | RNVC: 2
91698503: RNCC: 5 | RNVC: 2
91741643: RNCC: 5 | RNVC: 2
AMOA4289: RNCC: 5 | RNVC: 9

15 Sep 1988

5340-14-297-0761
Mending Plate

142970761
NO PRIMARY REF14-297-0761: RNCC: 3 | RNVC: 2
42-04-30-142: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-354-9389
Quick Release Pin

143549389
7M93-5: RNCC: 3 | RNVC: 2
CM5-803: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-262-5584
Rod End Connector

142625584
109585: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-524-4720
Loop Clamp

145244720
RI-SP419-PAR-DP-AS: RNCC: 3 | RNVC: 2
SP419-PA-DP-AS: RNCC: 3 | RNVC: 9
C065427: RNCC: 5 | RNVC: 2

21 Mar 2001

5340-14-549-7578
Retaining Band

145497578
T3-4029A0120009: RNCC: 3 | RNVC: 2
IC459-1: RNCC: 5 | RNVC: 2

10 May 2006

5340-14-443-8351
Rod End Clevis

144438351
FA1E291-43-22: RNCC: 3 | RNVC: 2

10 Dec 1990

5340-14-291-4190
Mending Plate

142914190
121E23-623-07-1: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-462-8330
Metal Grille

144628330
CEFL211241005REP8: RNCC: 3 | RNVC: 2
GR-CE/FL 211241005 REP8: RNCC: 5 | RNVC: 2

4 May 1993

5340-14-440-8624
Bow Handle

144408624
10502-092: RNCC: 3 | RNVC: 2

31 Jul 1990

5340-14-407-8156
Loop Clamp

144078156
PE27017-32: RNCC: 3 | RNVC: 2
85-693-0834: RNCC: 6 | RNVC: 9

5 Mar 1986

5340-14-522-3740
Mounting Bracket

145223740
35-0057-013: RNCC: 3 | RNVC: 2

25 Oct 2000

5340-14-545-5823
Mounting Bracket

145455823
365A53-1464-20: RNCC: 3 | RNVC: 2

21 Apr 2005

5340-14-373-2829
Access Cover

143732829
955120-203CPV: RNCC: 3 | RNVC: 2

21 Oct 1981

5340-14-526-0742
Arched Cushion

145260742
E1M3712-20: RNCC: 3 | RNVC: 2
MAT169-0024F12BLEUE: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-14-333-2736
Mounting Plate

143332736
736103: RNCC: 3 | RNVC: 2
20736103-6: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-537-5307
Angle Bracket

145375307
D1498-0036: RNCC: 3 | RNVC: 2
D1498-0036: RNCC: 3 | RNVC: 9

3 Nov 2003

5340-14-549-9700
Mounting Bracket

145499700
T327A1001105: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-441-4156
Mounting Bracket

144414156
PM1A716640010: RNCC: 3 | RNVC: 2
PM1A716640010: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-14-427-5125
Utility Access Door

144275125
NO PRIMARY REF14-427-5125: RNCC: 3 | RNVC: 2
20560: RNCC: 5 | RNVC: 9

20 Oct 1988

5340-14-441-8386
Mounting Plate

144418386
45-0162: RNCC: 3 | RNVC: 2

19 Sep 1990

5340-14-500-4463
Pipe Hanger

145004463
D63204620000: RNCC: 3 | RNVC: 2
F300 0T 024 4629: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-549-6221
Mounting Plate

145496221
JCB 10 135-751: RNCC: 3 | RNVC: 2

24 Apr 2006

5340-14-533-2606
Bow Handle

145332606
V116049: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-441-1509
Swivel Caster

144411509
70148: RNCC: 3 | RNVC: 9

22 Aug 1990

5340-14-259-7550
Bail Handle

142597550
9129-31: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-398-7445
Anchor Strap

143987445
5000611376: RNCC: 3 | RNVC: 2
5000611376: RNCC: 5 | RNVC: 9

6 Feb 1985

5340-14-530-6816
Mounting Plate

145306816
T257A5005143: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-353-5895
Angle Bracket

143535895
183731: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-374-0145
Access Cover

143740145
004508222P: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-545-4321
Angle Bracket

145454321
RA1M112181241N1: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-425-4098
Access Cover

144254098
543739: RNCC: 3 | RNVC: 2

30 Jun 1988

5340-14-535-8697
Utility Access Door

145358697
15H41657300: RNCC: 3 | RNVC: 2

25 Jun 2003

5340-14-545-3911
Access Cover

145453911
0102312B: RNCC: 3 | RNVC: 2

11 Apr 2005

5340-14-418-5784
Anchor Strap

144185784
413004020102: RNCC: 3 | RNVC: 2

2 Sep 1987

5340-14-526-5436
Mounting Bracket

145265436
DC1E202759205: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-543-4291
Mounting Bracket

145434291
8046221G00: RNCC: 3 | RNVC: 2

28 Oct 2004

5340-14-514-8498
Angle Bracket

145148498
6136808: RNCC: 3 | RNVC: 2
22185T010108B: RNCC: 5 | RNVC: 2

22 Jun 1999

5340-14-366-3345
Plug Button

143663345
16629072: RNCC: 3 | RNVC: 2
16629072: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-544-8855
Rod End Clevis

145448855
010173F00Z: RNCC: 3 | RNVC: 2
071364002000006: RNCC: 5 | RNVC: 2

2 Mar 2005

5340-14-480-7471
Access Cover

144807471
5010114053: RNCC: 3 | RNVC: 2

28 Mar 1996

5340-14-258-1248
Rod End Clevis

142581248
L102466: RNCC: 3 | RNVC: 2
1004867S00: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-414-9105
Plug Button

144149105
042774-750-921: RNCC: 3 | RNVC: 9
0184144T00: RNCC: 5 | RNVC: 2

23 Mar 1987

5340-14-354-7498
Access Cover

143547498
140408: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-286-5241
Access Cover

142865241
79032025: RNCC: 3 | RNVC: 2
79032025: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-412-4474
Mounting Plate

144124474
BJM00548: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-14-482-1328
Webbing Strap

144821328
TID27988: RNCC: 3 | RNVC: 2

20 Jun 1996

5340-14-500-2451
Mounting Plate

145002451
B94019020: RNCC: 3 | RNVC: 2
F300 0T 024 2474: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-434-5801
Plug Button

144345801
557362: RNCC: 3 | RNVC: 2

22 Sep 1989

5340-14-409-0328
Access Cover

144090328
124119: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-031-8735
Lock-Release Lever

140318735
69F0075: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-409-1119
Anchor Strap

144091119
641349: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-348-7372
Angle Bracket

143487372
1114284: RNCC: 3 | RNVC: 2
1114284: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-343-7079
Retaining Strap

143437079
210567: RNCC: 3 | RNVC: 2

13 Jul 1977

5340-14-502-7150
Access Cover

145027150
1161318: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-453-3928
Access Cover

144533928
39140570: RNCC: 3 | RNVC: 2

19 Feb 1992

5340-14-512-9159
Access Cover

145129159
562404: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-505-0381
Access Cover

145050381
5010094055: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-398-9582
Webbing Strap

143989582
005874557P: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-376-4438
Access Cover

143764438
16773692: RNCC: 3 | RNVC: 2
16773692: RNCC: 5 | RNVC: 2

28 Apr 1982

5340-14-546-2454
Loop Clamp

145462454
51211705040: RNCC: 3 | RNVC: 2

17 Jun 2005

5340-14-543-7329
Protection Bellows

145437329
476001012: RNCC: 3 | RNVC: 2

7 Dec 2004

5340-14-473-0818
Plug Button

144730818
443111: RNCC: 3 | RNVC: 2

7 Dec 1994

5340-14-549-9317
Runner

145499317
2092625: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-527-3075
Engine Plate

145273075
5010323590: RNCC: 3 | RNVC: 2

22 Oct 2001

5340-14-497-8254
Butt Hinge

144978254
1117192P00: RNCC: 3 | RNVC: 2

21 Oct 1997

5340-14-320-4551
Bow Handle

143204551
26238831: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-500-8076
Loop Clamp

145008076
E64700000008: RNCC: 3 | RNVC: 2
F300 0T 024 8276: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-338-6173
Anchor Strap

143386173
5000001040: RNCC: 3 | RNVC: 2
5000001040: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-526-9563
Mounting Bracket

145269563
10606058: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-471-5379
Access Cover

144715379
P056272: RNCC: 3 | RNVC: 2
56272: RNCC: 5 | RNVC: 9

31 Aug 1994

5340-14-505-0871
Access Cover

145050871
01474900: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-501-6051
Utility Access Door

145016051
45593419: RNCC: 3 | RNVC: 2
45593419: RNCC: 5 | RNVC: 2
F300 0T 025 0849: RNCC: 6 | RNVC: 9

5 Nov 1997

5340-14-507-9751
Mounting Bracket

145079751
46234270: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-236-9778
Retaining Band

142369778
K3363F: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-504-6252
Mounting Plate

145046252
PLAQU93915X00: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-14-563-4210
Utility Resilient Mount

145634210
UP160SB3: RNCC: 3 | RNVC: 2

8 Feb 2010

5340-14-533-5410
Access Cover

145335410
F1260094: RNCC: 3 | RNVC: 2

10 Feb 2003

5340-14-543-1814
Retaining Strap

145431814
315 78: RNCC: 3 | RNVC: 2
31578: RNCC: 5 | RNVC: 2
AA005235: RNCC: 6 | RNVC: 9

31 Aug 2004

5340-14-339-1807
Bow Handle

143391807
K4: RNCC: 3 | RNVC: 2
24551: RNCC: 5 | RNVC: 2
AF0088: RNCC: 5 | RNVC: 9
AF88: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-463-5533
Mounting Bracket

144635533
123808112: RNCC: 3 | RNVC: 9

17 Jun 1993

5340-14-553-7089
Mounting Bracket

145537089
S306A4100103: RNCC: 3 | RNVC: 2

14 May 2007

5340-14-500-8203
Section Block Clamp

145008203
E64009998062: RNCC: 3 | RNVC: 2
F300 0T 024 8405: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-547-9721
Access Cover

145479721
RA1B622242820A1: RNCC: 3 | RNVC: 2

30 Nov 2005

5340-14-402-5835
Anchor Strap

144025835
401010: RNCC: 3 | RNVC: 2
BGE401010: RNCC: 5 | RNVC: 2

19 Jul 1985

5340-14-500-7470
Loop Clamp

145007470
E64201368000: RNCC: 3 | RNVC: 2
F300 0T 024 7667: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-507-9727
Mounting Bracket

145079727
46234348: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-546-2467
Access Cover

145462467
190101191-690: RNCC: 3 | RNVC: 2
190101191-690: RNCC: 5 | RNVC: 2

17 Jun 2005

5340-14-545-6086
Mounting Bracket

145456086
82102649000: RNCC: 3 | RNVC: 2

25 Apr 2005

5340-14-446-2880
Rod End Clevis

144462880
7700526581: RNCC: 3 | RNVC: 2

12 Mar 1991

5340-14-294-1231
Access Cover

142941231
0067011300: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-504-7759
Access Cover

145047759
5000802025: RNCC: 3 | RNVC: 2
97735: RNCC: 3 | RNVC: 2
97735F: RNCC: 5 | RNVC: 9
CHN97735F: RNCC: 5 | RNVC: 9

4 Mar 1998

5340-14-549-6488
Access Cover

145496488
46429674: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-14-530-6191
Mounting Bracket

145306191
710510: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-14-351-0370
Leaf Spring

143510370
0038722695: RNCC: 3 | RNVC: 2
0038722695: RNCC: 5 | RNVC: 9

10 Aug 1978

5340-14-512-5784
Mounting Bracket

145125784
3BM02245AAAA: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-516-9673
Mounting Bracket

145169673
10507108: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-530-4438
Angle Bracket

145304438
8037780B00: RNCC: 3 | RNVC: 2

12 Jun 2002

5340-14-551-2573
Mounting Plate

145512573
RA1B721719: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-537-3853
Bumper

145373853
8043210W00: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-548-1113
Mounting Bracket

145481113
RA1A702606135: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-552-1138
Cushioning Pad

145521138
9033C4: RNCC: 3 | RNVC: 2

27 Nov 2006

5340-14-550-4525
Loop Clamp

145504525
01870006000: RNCC: 3 | RNVC: 2
AA009567: RNCC: 6 | RNVC: 9

21 Jun 2006

5340-14-516-9601
Retaining Strap

145169601
10354000: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-503-7182
Support Hook

145037182
01245400: RNCC: 3 | RNVC: 2

28 Jan 1998

5340-14-433-1167
Loop Clamp

144331167
121999: RNCC: 3 | RNVC: 2

11 Jul 1989

5340-14-488-4104
Block Clamp

144884104
36992-6: RNCC: 3 | RNVC: 2

7 May 1997

5340-14-517-4789
Access Cover

145174789
29487208: RNCC: 3 | RNVC: 2

17 Dec 1999

5340-14-460-0764
Pipe Hanger

144600764
PM1A725374500: RNCC: 3 | RNVC: 2
PM1A725374500: RNCC: 5 | RNVC: 2

7 Jan 1993

5340-14-418-3308
Anchor Strap

144183308
4-453019: RNCC: 3 | RNVC: 9
4-453019: RNCC: 5 | RNVC: 2
4-453019: RNCC: 5 | RNVC: 9

12 Aug 1987

5340-14-482-3493
Bumper

144823493
4172067: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-14-448-7910
Access Cover

144487910
39538065: RNCC: 3 | RNVC: 2
39538065: RNCC: 5 | RNVC: 9

10 Jul 1991

5340-14-326-9100
Rod End Connector

143269100
109622: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-325-9101
Key Blank

143259101
25511B3X10XC38: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-456-7856
Mounting Bracket

144567856
D51054: RNCC: 3 | RNVC: 2
D51054: RNCC: 5 | RNVC: 2

24 Jul 1992

5340-14-476-2379
Mounting Bracket

144762379
GA57065-1: RNCC: 3 | RNVC: 2

31 May 1995

5340-14-476-3472
Angle Bracket

144763472
92886: RNCC: 3 | RNVC: 2

7 Jun 1995

5340-14-481-7792
Butt Hinge

144817792
T700A2512034101: RNCC: 3 | RNVC: 2

30 May 1996

5340-14-394-7122
Bow Handle

143947122
19-1-3424: RNCC: 3 | RNVC: 2
3801964: RNCC: 5 | RNVC: 2

28 Aug 1984

5340-14-455-8742
Synchro Clamp

144558742
16661758: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-483-7041
Angle Bracket

144837041
JVHT260105: RNCC: 3 | RNVC: 2
F300 0T 019 0597: RNCC: 6 | RNVC: 9

27 Sep 1996

5340-14-523-2927
Angle Bracket

145232927
RA1M702446063N1: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-493-9362
Mounting Bracket

144939362
545889: RNCC: 3 | RNVC: 2
F300 0T 014 6602: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-351-1239
Webbing Strap

143511239
120460: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-539-6426
Mounting Plate

145396426
311409: RNCC: 3 | RNVC: 2

28 Jan 2004

5340-14-469-8320
Access Cover

144698320
A02644-01-1000P006: RNCC: 3 | RNVC: 2

10 May 1994

5340-14-236-9971
Retaining Strap

142369971
NO PRIMARY REF14-236-9971: RNCC: 3 | RNVC: 2
37196: RNCC: 5 | RNVC: 9
062066710: RNCC: 5 | RNVC: 9
66710: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-389-9632
Angle Bracket

143899632
NO PRIMARY REF14-389-9632: RNCC: 3 | RNVC: 2
0209283X00: RNCC: 5 | RNVC: 2
413941: RNCC: 5 | RNVC: 9
413941: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-14-465-7073
Pipe Hanger

144657073
25457808300: RNCC: 3 | RNVC: 2
443583-00: RNCC: 5 | RNVC: 2

8 Oct 1993

5340-14-473-0895
Blank Panel

144730895
920401000032: RNCC: 3 | RNVC: 2
89302183: RNCC: 5 | RNVC: 2
AS2-0.001.572: RNCC: 5 | RNVC: 2

7 Dec 1994

5340-14-360-4167
Angle Bracket

143604167
F10A705200460: RNCC: 3 | RNVC: 2
85-689-8506: RNCC: 6 | RNVC: 9

23 Nov 1979

5340-14-534-5290
Angle Bracket

145345290
C13010-250: RNCC: 3 | RNVC: 2

26 Mar 2003

5340-14-533-1927
Mounting Bracket

145331927
P22-010786: RNCC: 3 | RNVC: 2
A22-010786: RNCC: 5 | RNVC: 2

29 Jan 2003

5340-14-031-5473
Utility Access Door

140315473
262-10-61214-01: RNCC: 3 | RNVC: 2
85-689-8943: RNCC: 6 | RNVC: 9

14 Jun 1980

5340-14-343-2207
Retaining Clip

143432207
Z375-003-000: RNCC: 3 | RNVC: 2
Z375-003: RNCC: 5 | RNVC: 2

16 Jun 1977

5340-14-552-7089
Access Cover

145527089
252526913-01: RNCC: 3 | RNVC: 2

24 Jan 2007

5340-14-509-2496
Swivel Caster

145092496
SD5-160-33R: RNCC: 3 | RNVC: 2
0189536P00: RNCC: 5 | RNVC: 2

21 Oct 1998

5340-14-365-7870
Loop Clamp

143657870
043-03-22: RNCC: 3 | RNVC: 2

8 Oct 1980

5340-14-304-4908
Sliding Door Track

143044908
330A22-2017-02-51: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-513-0460
Mounting Bracket

145130460
R20-0610: RNCC: 3 | RNVC: 9
RASR20-0610: RNCC: 5 | RNVC: 9

3 Mar 1999

5340-14-474-0972
Angle Bracket

144740972
F7987 5245-89: RNCC: 3 | RNVC: 9

25 Jan 1995

5340-14-346-7465
Bumper

143467465
RM50-15: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-14-040-5659
Loop Clamp

140405659
55213-050ACL: RNCC: 1 | RNVC: 2
55213-050ACL: RNCC: 3 | RNVC: 2
55213-050-00ACL: RNCC: 5 | RNVC: 2
55213-50ACL: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-390-6156
Access Cover

143906156
AE82-709P2: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-459-0459
Webbing Strap

144590459
B80LG7,5MCAT4-1EXTANNACIER1EXTLI: RNCC: 3 | RNVC: 2
MN03/13-2AR: RNCC: 3 | RNVC: 2

17 Nov 1992

5340-14-482-9262
Pipe Hanger

144829262
78732-031-050A: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-304-3443
T Plate

143043443
330A21-2723-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-281-2592
Rod End Clevis

142812592
121E26-723-02-0: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-522-8808
Mounting Bracket

145228808
457-02914-000: RNCC: 3 | RNVC: 2
457-02914-000: RNCC: 5 | RNVC: 9

6 Dec 2000

5340-14-315-7304
Pipe Hanger

143157304
321A75-0152-22: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-434-9961
Handwheel

144349961
NO PRIMARY REF14-434-9961: RNCC: 3 | RNVC: 2
661 321: RNCC: 5 | RNVC: 2
661-32: RNCC: 5 | RNVC: 2
661-321: RNCC: 5 | RNVC: 2
0661 321: RNCC: 5 | RNVC: 9

11 Oct 1989

5340-14-455-4792
Bumper

144554792
MAT214-0627F1: RNCC: 3 | RNVC: 2

21 May 1992

5340-14-519-4047
Mounting Plate

145194047
095-40-050: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-365-7862
Rod End Clevis

143657862
043-01-23-002: RNCC: 3 | RNVC: 2

8 Oct 1980

5340-14-464-9742
Mounting Plate

144649742
365A67-4101-21: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-242-7690
Retaining Clip

142427690
PA359-139M1P189: RNCC: 3 | RNVC: 9

1 Jan 1967

5340-14-441-3384
Angle Bracket

144413384
78702-040A: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-418-3343
Angle Bracket

144183343
4-455609: RNCC: 3 | RNVC: 9
4-455609: RNCC: 5 | RNVC: 2
4-455609: RNCC: 5 | RNVC: 9

12 Aug 1987

5340-14-416-8429
Rod End Clevis

144168429
F177-24-01: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-384-0856
Angle Bracket

143840856
709884-100: RNCC: 3 | RNVC: 2
709884-100: RNCC: 5 | RNVC: 2
709884: RNCC: 5 | RNVC: 9
5340AA2070842: RNCC: 6 | RNVC: 9

21 Feb 1996

5340-14-295-2152
Loop Clamp

142952152
H5V: RNCC: 3 | RNVC: 2
99008508: RNCC: 5 | RNVC: 2
0118976X00: RNCC: 5 | RNVC: 2
99008508: RNCC: 5 | RNVC: 2
100SP27-0021: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-217-8936
Loop Clamp

142178936
3160S50-20-330: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-376-6129
Buckle

143766129
34209-160-025: RNCC: 3 | RNVC: 2
34209-251-160: RNCC: 3 | RNVC: 2
34209-025: RNCC: 5 | RNVC: 2
34209-160-251: RNCC: 5 | RNVC: 2
C4209-160-025: RNCC: 5 | RNVC: 2

28 Apr 1982

5340-14-529-8094
Mounting Plate

145298094
1265-594B389: RNCC: 3 | RNVC: 2

11 Apr 2002

5340-14-471-7740
Mounting Bracket

144717740
50008880: RNCC: 3 | RNVC: 2

14 Sep 1994

5340-14-367-3808
Access Cover

143673808
158746: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-402-1393
Mounting Plate

144021393
620483: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-456-1536
Mounting Bracket

144561536
3511 191 89901: RNCC: 3 | RNVC: 2

18 Jun 1992

5340-14-494-4772
Access Cover

144944772
T53 217 30: RNCC: 3 | RNVC: 2
F300 0T 017 3821: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-396-3676
Access Cover

143963676
476612G: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-386-1856
Access Cover

143861856
CPA133086: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-375-3433
Access Cover

143753433
045H00-572603A: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-383-9894
Angle Bracket

143839894
387611: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-536-4213
Mounting Plate

145364213
T537A2005154: RNCC: 3 | RNVC: 2

5 Aug 2003

5340-14-534-5570
Access Cover

145345570
DA2C707114511N1: RNCC: 3 | RNVC: 2

26 Mar 2003

5340-14-423-3643
Rod End Clevis

144233643
160G202404-17: RNCC: 3 | RNVC: 2

14 Apr 1988

5340-14-547-5192
Mounting Bracket

145475192
RA1M701666511N1: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-383-1881
Retaining Strap

143831881
MY205151205G01: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-548-0968
Angle Bracket

145480968
RA1M701716109: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-529-3244
Access Cover

145293244
341421: RNCC: 3 | RNVC: 2

20 Mar 2002

5340-14-413-9803
Runner

144139803
407260: RNCC: 3 | RNVC: 2
BJQ407260: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-384-7155
Rod End Clevis

143847155
16764972: RNCC: 3 | RNVC: 2
16764972: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-341-5600
Mounting Bracket

143415600
0064637090: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-388-7118
Retaining Strap

143887118
T8002HD29AREP6: RNCC: 3 | RNVC: 2

3 Nov 1983

5340-14-367-2163
Retaining Band

143672163
A64299: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-399-1465
Webbing Strap

143991465
640613: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-394-9729
Webbing Strap

143949729
96113018: RNCC: 3 | RNVC: 2
96113018: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-413-9640
Retaining Strap

144139640
ST400S60P164: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-546-7374
Mounting Bracket

145467374
S257A7011106: RNCC: 3 | RNVC: 2

9 Aug 2005

5340-14-457-1519
Access Cover

144571519
16015770W: RNCC: 3 | RNVC: 2
RE30684: RNCC: 5 | RNVC: 2

13 Aug 1992

5340-14-549-0718
Mounting Bracket

145490718
RA1M291710125A1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-393-0010
Angle Bracket

143930010
5000708327: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-14-291-2994
Rod End Clevis

142912994
USM2MF52E24: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-396-1803
Anchor Strap

143961803
226566: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-517-0302
Loop Clamp

145170302
51520605012: RNCC: 3 | RNVC: 2
21FE12: RNCC: 5 | RNVC: 2

28 Oct 1999

5340-14-395-3603
Rim Lock

143953603
5802GT: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-551-2697
Loop Clamp

145512697
RA1M721595101: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-399-0366
Loop Clamp

143990366
RASURAD1011: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-550-3347
Mounting Bracket

145503347
2716043900: RNCC: 3 | RNVC: 2

16 Jun 2006

5340-14-545-8999
Bumper

145458999
799GS02: RNCC: 3 | RNVC: 2

26 May 2005

5340-14-426-4629
Loop Clamp

144264629
1105926500: RNCC: 3 | RNVC: 2
44336: RNCC: 5 | RNVC: 9

1 Sep 1988

5340-14-549-8471
Angle Bracket

145498471
2092790: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-529-8816
Bridge Clamp

145298816
DA6750: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-350-4168
Access Cover

143504168
212684: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-519-4760
Mounting Bracket

145194760
282371750: RNCC: 3 | RNVC: 2
542570: RNCC: 5 | RNVC: 2

22 Mar 2000

5340-14-500-8186
Section Block Clamp

145008186
E64009998068: RNCC: 3 | RNVC: 2
F300 0T 024 8388: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-384-6409
Access Cover

143846409
16496944: RNCC: 3 | RNVC: 2

2 Jun 1983

5340-14-542-1628
Access Cover

145421628
61201072AB: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-14-508-1871
Access Cover

145081871
EX314384: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-379-4324
Access Cover

143794324
2206-912C507: RNCC: 3 | RNVC: 2

1 Oct 1982

5340-14-380-7896
Utility Access Door

143807896
16985495: RNCC: 3 | RNVC: 2

14 Dec 1982

5340-14-484-4121
Access Cover

144844121
851058: RNCC: 3 | RNVC: 2
851058: RNCC: 5 | RNVC: 2
851058: RNCC: 5 | RNVC: 2
851058: RNCC: 5 | RNVC: 9

14 Nov 1996

5340-14-386-4613
Bumper

143864613
DA2C286413530: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-461-2905
Mounting Bracket

144612905
3DM180554: RNCC: 3 | RNVC: 2
89470011: RNCC: 5 | RNVC: 2

3 Mar 1993

5340-14-472-9919
Mounting Bracket

144729919
27108399-7: RNCC: 3 | RNVC: 2

23 Nov 1994

5340-14-031-9807
Strap Fastener Loop

140319807
CF1A11144: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-338-7735
Rod End Connector

143387735
16355: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-546-5835
Angle Bracket

145465835
RA1A705626051: RNCC: 3 | RNVC: 2

20 Jul 2005

5340-14-515-3403
Compression Cup

145153403
5023433867: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-525-6729
Bridge Clamp

145256729
20 242 050 5960: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-448-1328
Mounting Bracket

144481328
012072190001: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-463-0212
Mounting Plate

144630212
5000917804: RNCC: 3 | RNVC: 2

12 May 1993

5340-14-544-3151
Mounting Bracket

145443151
AMPC GENE E223551: RNCC: 3 | RNVC: 2

19 Jan 2005

5340-14-550-9215
Angle Bracket

145509215
RA1B703237332: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-544-0422
Webbing Strap

145440422
AMPC GENE E229306: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-14-501-0481
Angle Bracket

145010481
31775031: RNCC: 3 | RNVC: 9
F300 0T 025 0784: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-461-2676
Angle Bracket

144612676
4772820050: RNCC: 3 | RNVC: 2
5046061: RNCC: 5 | RNVC: 9

3 Mar 1993

5340-14-539-6780
Mounting Bracket

145396780
10650268: RNCC: 3 | RNVC: 2

28 Jan 2004

5340-14-540-7357
Mounting Plate

145407357
38051097: RNCC: 3 | RNVC: 2
ND001929: RNCC: 5 | RNVC: 2
4848ZG8613181049: RNCC: 6 | RNVC: 9

22 Apr 2004

5340-14-396-5952
Expansion Plug

143965952
6636074: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-455-8143
Webbing Strap

144558143
3158798: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-437-8358
Mounting Plate

144378358
3005453: RNCC: 3 | RNVC: 2

21 Feb 1990

5340-14-457-5776
Mounting Bracket

144575776
5010146368: RNCC: 3 | RNVC: 2
89287703: RNCC: 5 | RNVC: 2
5000730417: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-550-3963
Loop Clamp

145503963
IBA511: RNCC: 3 | RNVC: 2

19 Jun 2006

5340-14-354-1019
Mending Plate

143541019
0120590050: RNCC: 3 | RNVC: 2
0120590050: RNCC: 5 | RNVC: 2

16 Jan 1979

5340-14-368-8148
Compression Cup

143688148
30518: RNCC: 3 | RNVC: 2

10 Mar 1981

5340-14-475-7606
Mounting Plate

144757606
ETD014055019121: RNCC: 3 | RNVC: 2

3 May 1995

5340-14-549-7619
Mounting Bracket

145497619
56295361: RNCC: 3 | RNVC: 2

10 May 2006

5340-14-541-5234
Eye Hook

145415234
1091543-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-348-1100
Retaining Strap

143481100
C83-58000: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-261-1756
Flush Catch Claw

142611756
NO PRIMARY REF14-261-1756: RNCC: 3 | RNVC: 2
MA2-04-04-08: RNCC: 5 | RNVC: 2
MA2-04-04-08: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-292-1037
Lock-Release Lever

142921037
78-8000-7420-1: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-292-5766
Rod End Clevis

142925766
121E47-142-00-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-341-8100
Rod End Clevis

143418100
0055200: RNCC: 3 | RNVC: 2
208-00552-00: RNCC: 3 | RNVC: 9
1144-3: RNCC: 5 | RNVC: 2
1144-30: RNCC: 5 | RNVC: 2

14 Apr 1977

5340-14-201-9183
Retaining Strap

142019183
574-308-121-0: RNCC: 3 | RNVC: 2

1 Jan 1962

5340-14-468-6518
Arched Cushion

144686518
MAT169-0012F23DE30: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-14-539-6831
Access Cover

145396831
213566: RNCC: 3 | RNVC: 2

28 Jan 2004

5340-14-216-4954
Rod End Connector

142164954
36248: RNCC: 3 | RNVC: 2
392915: RNCC: 5 | RNVC: 2

1 Jan 1965

5340-14-454-6878
Retaining Strap

144546878
61432: RNCC: 3 | RNVC: 2
89473433: RNCC: 5 | RNVC: 2

9 Apr 1992

5340-14-229-1776
Mounting Bracket

142291776
2019630: RNCC: 3 | RNVC: 2
SG-179A: RNCC: 6 | RNVC: 9

1 Jan 1967

5340-14-468-1586
Angle Bracket

144681586
78703-058A: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-031-1672
Anchor Strap

140311672
VDP4530: RNCC: 3 | RNVC: 2
VDPV4841: RNCC: 5 | RNVC: 2

14 Jun 1980

5340-14-392-8612
Access Cover

143928612
225789: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-454-5114
Access Hole Frame

144545114
16293265: RNCC: 3 | RNVC: 2
16293265: RNCC: 5 | RNVC: 9

2 Apr 1992

5340-14-540-0331
Access Cover

145400331
F1414028: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-504-6936
Access Cover

145046936
7524192: RNCC: 3 | RNVC: 2
5001821937: RNCC: 3 | RNVC: 2

27 Feb 1998

5340-14-475-7338
Mounting Bracket

144757338
350A86-1051-00: RNCC: 3 | RNVC: 2
F300 0T 018 9417: RNCC: 5 | RNVC: 9

26 Apr 1995

5340-14-263-4994
Rod End Clevis

142634994
R111899: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-554-5884
Access Cover

145545884
0390950170: RNCC: 3 | RNVC: 2

23 Jul 2007

5340-14-486-3612
Retaining Strap

144863612
10034482: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-472-6530
Utility Access Door

144726530
46050228: RNCC: 3 | RNVC: 2

9 Nov 1994

5340-14-452-0651
Mounting Plate

144520651
D53606: RNCC: 3 | RNVC: 2
D53606: RNCC: 5 | RNVC: 2

18 Dec 1991

5340-14-394-9543
Anchor Strap

143949543
29744235: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-355-8821
Access Cover

143558821
7910008224: RNCC: 3 | RNVC: 2
2107-45: RNCC: 5 | RNVC: 2

5 Apr 1979

5340-14-550-4655
Angle Bracket

145504655
RA1B701301171N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-474-5686
Mounting Bracket

144745686
27108356-7: RNCC: 3 | RNVC: 2

22 Feb 1995

5340-14-335-3057
Angle Bracket

143353057
191435: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-519-8906
Stand Base

145198906
46606519: RNCC: 3 | RNVC: 2

19 Apr 2000

5340-14-554-1474
Mounting Plate

145541474
82045867000: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-416-0446
Retaining Strap

144160446
BJM01522: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-508-7565
Access Cover

145087565
46943038: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-14-454-0782
Bridge Clamp

144540782
16243317: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-257-8935
Retaining Strap

142578935
C955A6-5: RNCC: 3 | RNVC: 2
91206342: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-524-4239
Mounting Bracket

145244239
CV114-1: RNCC: 3 | RNVC: 2

16 Mar 2001

5340-14-290-3183
Pipe Hanger

142903183
0264300800: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-440-9624
Eye Hook

144409624
F135171: RNCC: 3 | RNVC: 2

9 Aug 1990

5340-14-384-4061
Furniture Leg Tip

143844061
SERIEPEMB0UTSTANDARDN0IR22: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-314-1268
Access Cover

143141268
000MA0131REP3: RNCC: 3 | RNVC: 2
000MA131REP3: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-209-8555
Shelf Bracket

142098555
74939: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-471-6842
Access Cover

144716842
0164030720: RNCC: 3 | RNVC: 2

7 Sep 1994

5340-14-527-2517
Mounting Bracket

145272517
A557088: RNCC: 3 | RNVC: 2

17 Oct 2001

5340-14-466-1673
Loop Clamp

144661673
166012: RNCC: 3 | RNVC: 2
89170123: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-274-3262
Angle Bracket

142743262
12509027: RNCC: 3 | RNVC: 2
12509027: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-320-2247
Rod End Clevis

143202247
116997: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-457-6189
Section Block Clamp

144576189
PM1A741194002: RNCC: 3 | RNVC: 2
PM1A741194002: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-228-0413
Angle Bracket

142280413
0077130140: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-481-3799
Angle Bracket

144813799
261762: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-440-8613
Angle Bracket

144408613
406739: RNCC: 3 | RNVC: 9

31 Jul 1990

5340-14-404-9689
Bow Handle

144049689
571908: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-547-9752
Angle Bracket

145479752
RA1M701346301: RNCC: 3 | RNVC: 2

30 Nov 2005

5340-14-550-4830
Mounting Bracket

145504830
RA1A702436139: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-430-1824
Loop Clamp

144301824
68935018: RNCC: 3 | RNVC: 2
68935018: RNCC: 5 | RNVC: 9

8 Mar 1989

5340-14-540-6206
Mounting Bracket

145406206
38051036: RNCC: 3 | RNVC: 2
00306A: RNCC: 5 | RNVC: 2
4848ZG8613180057: RNCC: 6 | RNVC: 9

8 Apr 2004

5340-14-485-9586
Mounting Bracket

144859586
1076365T01: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-455-7746
Plate Spacer

144557746
640362: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-544-3415
Mounting Bracket

145443415
82075465000: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-14-393-1261
Retaining Strap

143931261
02142005600: RNCC: 3 | RNVC: 2
021420056: RNCC: 5 | RNVC: 2

12 Apr 1984

5340-14-276-4111
Mending Plate

142764111
C245781: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-376-5909
Retaining Clip

143765909
50416435: RNCC: 3 | RNVC: 2
201834: RNCC: 5 | RNVC: 2
201834: RNCC: 5 | RNVC: 2

28 Apr 1982

5340-14-554-8587
Mounting Bracket

145548587
7510642Y00: RNCC: 3 | RNVC: 2

3 Sep 2007

5340-14-484-6229
Access Cover

144846229
1021445F00: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-031-9002
Furniture Leg Tip

140319002
4412: RNCC: 3 | RNVC: 9

5 Jul 1980

5340-14-432-8080
Anchor Strap

144328080
79038195: RNCC: 3 | RNVC: 2

27 Jun 1989

5340-14-555-4515
Mounting Plate

145554515
T711A1006396: RNCC: 3 | RNVC: 2

19 Nov 2007

5340-14-518-1073
Mounting Plate

145181073
5000419405: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-430-5733
Cover Strip

144305733
PM1A227000004: RNCC: 3 | RNVC: 2
PM1A227000004: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-521-1530
Access Cover

145211530
F1262739: RNCC: 3 | RNVC: 2
F1262739: RNCC: 5 | RNVC: 2

12 Jul 2000

5340-14-381-5170
Mounting Plate

143815170
196248: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-356-9080
Access Cover

143569080
F0384CA: RNCC: 3 | RNVC: 2

15 May 1979

5340-14-554-2185
Loop Clamp

145542185
357 043: RNCC: 3 | RNVC: 2
357 043: RNCC: 3 | RNVC: 2

13 Jun 2007

5340-14-425-3470
Rod End Clevis

144253470
160H712601-57: RNCC: 3 | RNVC: 2

30 Jun 1988

5340-14-418-4989
Anchor Strap

144184989
4771912600: RNCC: 3 | RNVC: 2

26 Aug 1987

5340-14-394-9486
Angle Bracket

143949486
20320763: RNCC: 3 | RNVC: 2
20320763: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-458-0054
Mounting Bracket

144580054
313645: RNCC: 3 | RNVC: 2
313645: RNCC: 5 | RNVC: 9

2 Oct 1992

5340-14-413-6955
Loop Clamp

144136955
T0P7R2: RNCC: 3 | RNVC: 2
TOP7R2: RNCC: 5 | RNVC: 2

15 Jan 1987

5340-14-448-0701
Runner

144480701
PM1A711024431: RNCC: 3 | RNVC: 2
PM1A711024431: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-279-2219
Angle Bracket

142792219
20751: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-505-6850
Mounting Bracket

145056850
326273C36373: RNCC: 3 | RNVC: 2
0234: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-482-1011
Mounting Bracket

144821011
22531140: RNCC: 3 | RNVC: 2
22531140: RNCC: 5 | RNVC: 9

20 Jun 1996

5340-14-452-4676
Access Cover

144524676
1080650020: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-489-9805
Rod End Clevis

144899805
PM1A471010002A1: RNCC: 3 | RNVC: 2
PM1A471010002A1: RNCC: 5 | RNVC: 2

3 Sep 1997

5340-14-505-4729
Protection Bellows

145054729
17174: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-489-9698
Mounting Plate

144899698
350820B: RNCC: 3 | RNVC: 2

3 Sep 1997

5340-14-400-2617
Angle Bracket

144002617
0301010900: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-254-4956
Retaining Strap

142544956
ZB9465508A: RNCC: 3 | RNVC: 2
0000465508: RNCC: 3 | RNVC: 2
465508: RNCC: 5 | RNVC: 9
0000465508: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-412-1500
Access Cover

144121500
406105: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-527-3707
Mounting Plate

145273707
F127097: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-460-0806
Cover Strip

144600806
PM1A725534525: RNCC: 3 | RNVC: 2
PM1A725534525: RNCC: 5 | RNVC: 2

7 Jan 1993

5340-14-287-5680
Rod End Clevis

142875680
138-15: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-489-5321
Access Cover

144895321
20231594: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-14-542-8041
Rod End Clevis

145428041
T070G1005124: RNCC: 3 | RNVC: 2

14 Aug 2004

5340-14-449-0407
Access Cover

144490407
16244700: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-14-484-1128
Mounting Plate

144841128
5000749599: RNCC: 3 | RNVC: 2

24 Oct 1996

5340-14-484-3451
Access Cover

144843451
1067980M00: RNCC: 3 | RNVC: 2

14 Nov 1996

5340-14-353-4824
Loop Clamp

143534824
270362: RNCC: 3 | RNVC: 2
270362: RNCC: 5 | RNVC: 2

16 Jan 1979

5340-14-477-2159
Bow Handle

144772159
RA1M239650411: RNCC: 3 | RNVC: 2

2 Aug 1995

5340-14-434-2564
Bow Handle

144342564
31109600XX: RNCC: 3 | RNVC: 2

18 Sep 1989

5340-14-409-4109
Retaining Strap

144094109
3058271: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-475-4194
Mounting Bracket

144754194
TS124009: RNCC: 3 | RNVC: 2

5 Apr 1995

5340-14-370-5474
Mending Plate

143705474
21102480: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-379-3398
Retaining Clip

143793398
NO PRIMARY REF14-379-3398: RNCC: 3 | RNVC: 2
344-03244-0: RNCC: 5 | RNVC: 9
344032440: RNCC: 5 | RNVC: 9

1 Oct 1982

5340-14-462-9062
Mounting Bracket

144629062
2DM180928: RNCC: 3 | RNVC: 2
91714443: RNCC: 5 | RNVC: 2

5 May 1993

5340-14-463-0147
Angle Bracket

144630147
0000781406: RNCC: 3 | RNVC: 2

12 May 1993

5340-14-462-7169
Mounting Bracket

144627169
SBE625-3-1: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-14-408-3209
Swivel Caster

144083209
125CPK: RNCC: 3 | RNVC: 9
CPK125: RNCC: 3 | RNVC: 9
CPK125K: RNCC: 5 | RNVC: 9

19 Mar 1986

5340-14-272-8575
Mending Plate

142728575
9131715: RNCC: 3 | RNVC: 2
9131715: RNCC: 3 | RNVC: 9

1 Jan 1971

5340-14-439-7100
Mounting Bracket

144397100
154444: RNCC: 3 | RNVC: 2
392954: RNCC: 5 | RNVC: 2

16 May 1990

5340-14-272-8563
Mending Plate

142728563
9131439: RNCC: 3 | RNVC: 2
9131439: RNCC: 3 | RNVC: 9

1 Jan 1971

5340-14-403-9168
Doorstop

144039168
6312: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-455-8609
Flush Catch Claw

144558609
036471S01TRA: RNCC: 3 | RNVC: 2
036471S: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-360-2154
Threaded Rod End

143602154
16293133: RNCC: 3 | RNVC: 2
16293133: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-523-2866
Retaining Band

145232866
RA1M701916331: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-472-9687
Angle Bracket

144729687
38224068: RNCC: 3 | RNVC: 2
38224068: RNCC: 5 | RNVC: 9

23 Nov 1994

5340-14-469-3905
Runner

144693905
466S061: RNCC: 3 | RNVC: 2
31112597000: RNCC: 5 | RNVC: 2
446S061: RNCC: 5 | RNVC: 2
446S511F: RNCC: 5 | RNVC: 2

20 Apr 1994

5340-14-437-9941
Angle Bracket

144379941
1369415: RNCC: 3 | RNVC: 2
KACH415: RNCC: 5 | RNVC: 2

5 Mar 1990

5340-14-365-7459
Door Handle

143657459
0000662784: RNCC: 3 | RNVC: 2
0000662784: RNCC: 5 | RNVC: 9
662784: RNCC: 5 | RNVC: 9

8 Oct 1980

5340-14-531-7710
Bridge Clamp

145317710
0847270D00: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-386-1895
Retaining Strap

143861895
20729433: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-324-5911
Retaining Strap

143245911
M116678: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-508-5148
Mounting Plate

145085148
10340718: RNCC: 3 | RNVC: 2

16 Sep 1998

5340-14-408-1272
Angle Bracket

144081272
620494: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-521-7346
Mounting Bracket

145217346
010112019P: RNCC: 3 | RNVC: 2

12 Sep 2000

5340-14-378-4689
Pipe Hanger

143784689
8812154400: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-521-9579
Loop Clamp

145219579
1PG6E0006A: RNCC: 3 | RNVC: 2
319016: RNCC: 3 | RNVC: 2

27 Sep 2000

5340-14-405-7448
Eye Hook

144057448
001010: RNCC: 3 | RNVC: 2
06002020-227-14: RNCC: 5 | RNVC: 2

4 Dec 1985

5340-14-530-7691
Mounting Bracket

145307691
888-413-010-0: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-470-9617
Door Handle

144709617
3400/2000/1013: RNCC: 3 | RNVC: 2

20 Jul 1994

5340-14-451-1322
Butt Hinge

144511322
Z00110-01: RNCC: 3 | RNVC: 2

30 Oct 1991

5340-14-527-8449
Runner

145278449
J06007-01-6000P003: RNCC: 3 | RNVC: 2

27 Nov 2001

5340-14-472-7270
Angle Bracket

144727270
410590: RNCC: 3 | RNVC: 2
410590-001: RNCC: 5 | RNVC: 9

9 Nov 1994

5340-14-310-2278
Access Cover

143102278
72-5625: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-553-4557
Mounting Bracket

145534557
CCN301-610-410: RNCC: 3 | RNVC: 2

4 Apr 2007

5340-14-285-3332
Retaining Clip

142853332
1517-00: RNCC: 3 | RNVC: 2
007130318: RNCC: 3 | RNVC: 9
7130318: RNCC: 5 | RNVC: 9
1517: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-540-0722
Mounting Plate

145400722
21224061-01: RNCC: 3 | RNVC: 2
21416825-8: RNCC: 5 | RNVC: 2

4 Mar 2004

5340-14-568-8230
Utility Resilient Mount

145688230
BFN45-500: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-14-505-1880
Protection Bellows

145051880
204453-02: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-523-1963
Rod End Clevis

145231963
121E22-652-02-0: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-417-8817
Detent Plunger

144178817
PEC100-001-596: RNCC: 3 | RNVC: 2

31 Jul 1987

5340-14-344-5350
Retaining Band

143445350
2407-32: RNCC: 3 | RNVC: 2
85-572-4960: RNCC: 6 | RNVC: 9

10 Aug 1977

5340-14-479-8629
Angle Bracket

144798629
815-0-78-827: RNCC: 3 | RNVC: 2

7 Feb 1996

5340-14-351-6938
Rod End Connector

143516938
319A78-01-014: RNCC: 3 | RNVC: 2
85-800-6335: RNCC: 6 | RNVC: 9

12 Sep 1978

5340-14-478-6227
Mounting Plate

144786227
307-111-101-0: RNCC: 3 | RNVC: 2

8 Nov 1995

5340-14-393-4759
Butt Hinge

143934759
50-7-3550: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-513-6479
Loop Clamp

145136479
NO PRIMARY REF14-513-6479: RNCC: 3 | RNVC: 2
00030-30005: RNCC: 5 | RNVC: 9
0003030005: RNCC: 5 | RNVC: 9

1 Apr 1999

5340-14-484-2193
Access Cover

144842193
CCN301202A3: RNCC: 3 | RNVC: 2
CCN301-202A3: RNCC: 5 | RNVC: 2

31 Oct 1996

5340-14-351-1023
Access Cover

143511023
8725109-001: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-399-0068
Anchor Strap

143990068
M375-105104: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-388-5517
Access Cover

143885517
NO PRIMARY REF14-388-5517: RNCC: 3 | RNVC: 2
75-174-11-36: RNCC: 5 | RNVC: 9

3 Nov 1983

5340-14-526-4745
Loop Clamp

145264745
78647B110: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-424-9238
Rim Lock Set

144249238
ART50CH: RNCC: 3 | RNVC: 2
ZENITHART50CH: RNCC: 5 | RNVC: 2

14 Jun 1988

5340-14-383-4681
Angle Bracket

143834681
21-121-300: RNCC: 3 | RNVC: 2
21-121-300: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-448-4743
Mounting Bracket

144484743
5000921430: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-14-377-3889
Handwheel

143773889
20026PE33: RNCC: 3 | RNVC: 9
20026PE33: RNCC: 5 | RNVC: 2

17 May 1982

5340-14-409-3585
Turnbuckle Body

144093585
72650: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-416-4763
Angle Bracket

144164763
533329: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-14-041-9509
Bumper

140419509
M80001: RNCC: 3 | RNVC: 9
E492D2292: RNCC: 5 | RNVC: 9

24 Jul 1976

5340-14-552-6293
Mounting Bracket

145526293
RA1M703756741A2N3: RNCC: 3 | RNVC: 2

18 Jan 2007

5340-14-461-3861
Protection Bellows

144613861
3293-51: RNCC: 3 | RNVC: 2

10 Mar 1993

5340-14-546-1228
Mounting Bracket

145461228
50110024: RNCC: 3 | RNVC: 2

14 Jun 2005

5340-14-489-6060
Mounting Bracket

144896060
0177700500: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-501-7050
Runner

145017050
45280155: RNCC: 3 | RNVC: 2
45280155: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-497-4620
Mounting Bracket

144974620
1302131N301: RNCC: 3 | RNVC: 2
1302131E301: RNCC: 5 | RNVC: 2
F300 0T 023 2199: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-392-9815
Mending Plate

143929815
0000784854: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-396-5773
Loop Clamp

143965773
616789: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-549-4360
Access Cover

145494360
0235290010: RNCC: 3 | RNVC: 2

4 Apr 2006

5340-14-202-5364
Loop Clamp

142025364
511131050162: RNCC: 3 | RNVC: 2
55G16: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-14-446-2492
Retaining Strap

144462492
095188Q: RNCC: 3 | RNVC: 2

11 Mar 1991

5340-14-489-9326
Mounting Bracket

144899326
476591Q: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-14-402-1018
Mending Plate

144021018
400450: RNCC: 3 | RNVC: 2
BGE400450: RNCC: 5 | RNVC: 2

26 Jun 1985

5340-14-544-0727
Access Cover

145440727
430300042: RNCC: 3 | RNVC: 2

3 Jan 2005

5340-14-503-7344
Mounting Bracket

145037344
T623A1051301: RNCC: 3 | RNVC: 2
H623A1001343: RNCC: 5 | RNVC: 2

28 Jan 1998

5340-14-450-4917
Mending Plate

144504917
BLC236564: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-14-488-7243
Metal Grille

144887243
0753058Q00: RNCC: 3 | RNVC: 2

28 May 1997

5340-14-254-9014
Access Cover

142549014
ST406M31P49: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-488-4341
Loop Clamp

144884341
511253050322: RNCC: 3 | RNVC: 2
55SE32: RNCC: 5 | RNVC: 2

7 May 1997

5340-14-347-8726
Rod End Clevis

143478726
106097002301: RNCC: 3 | RNVC: 2
106097002301: RNCC: 5 | RNVC: 2

1 Mar 1978

5340-14-310-8118
Mounting Plate

143108118
0260621190: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-507-9094
Access Cover

145079094
30344806G: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-540-7051
Mounting Bracket

145407051
38010827: RNCC: 3 | RNVC: 2
5330 316465 11: RNCC: 5 | RNVC: 2
4848ZG8613180954: RNCC: 6 | RNVC: 9

21 Apr 2004

5340-14-325-9144
Key Blank

143259144
25511B16X16XC38: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-455-7345
Mounting Plate

144557345
46484: RNCC: 3 | RNVC: 2
5044475: RNCC: 5 | RNVC: 9

11 Jun 1992

Load More Results