What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 37 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 37 of 446

5340-14-533-8964
Mounting Plate

145338964
SZ08.704.074: RNCC: 3 | RNVC: 2
08-704-074: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-408-6527
Rod End Clevis

144086527
160G262056-03: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-465-7719
Pipe Hanger

144657719
063973-853-921: RNCC: 3 | RNVC: 9
Z00.N7788745275: RNCC: 5 | RNVC: 2
63973: RNCC: 5 | RNVC: 9

14 Oct 1993

5340-14-424-0685
Plug Button

144240685
NO PRIMARY REF14-424-0685: RNCC: 3 | RNVC: 2
STACI025: RNCC: 5 | RNVC: 2

11 May 1988

5340-14-410-7458
Angle Bracket

144107458
A02358-03-1000P013: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-412-2088
Flush Catch Claw

144122088
332A21-1385-20: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-484-2525
Mounting Bracket

144842525
501-729-397-0: RNCC: 3 | RNVC: 2

31 Oct 1996

5340-14-407-1637
Expansion Plug

144071637
E29584-9A: RNCC: 3 | RNVC: 2
425747: RNCC: 5 | RNVC: 2
BOUCHON EXPANSIBLE9: RNCC: 5 | RNVC: 2

12 Feb 1986

5340-14-263-8762
Pipe Hanger

142638762
17-5-1161: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-311-0998
Bridge Clamp

143110998
9220011: RNCC: 3 | RNVC: 2
9-22-00-11: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-468-6508
Mounting Bracket

144686508
0600-101-100: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-14-375-9766
Leaf Spring

143759766
NO PRIMARY REF14-375-9766: RNCC: 3 | RNVC: 2
464109900: RNCC: 5 | RNVC: 2
464109900: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-524-1995
Access Cover

145241995
ST159-2BM516-1: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-452-9446
Rod End Connector

144529446
7-89-2-07REP4: RNCC: 3 | RNVC: 2

29 Jan 1992

5340-14-550-6537
Utility Access Door

145506537
6206-121-000A: RNCC: 3 | RNVC: 2

6 Jul 2006

5340-14-552-7131
Access Cover

145527131
0027572: RNCC: 3 | RNVC: 2

25 Jan 2007

5340-14-400-0152
Access Cover

144000152
603910: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-337-6641
Access Cover

143376641
0555669700: RNCC: 3 | RNVC: 2
0555669700: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-14-430-3147
Access Cover

144303147
39149208: RNCC: 3 | RNVC: 2

15 Mar 1989

5340-14-341-6626
Retaining Strap

143416626
TH20B2408: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-357-2305
Corner Brace

143572305
19415912: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-555-7872
Access Cover

145557872
0177810020: RNCC: 3 | RNVC: 2

14 Dec 2007

5340-14-507-9855
Angle Bracket

145079855
4773120050: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-423-0298
Plug Button

144230298
117119: RNCC: 3 | RNVC: 2

31 Mar 1988

5340-14-287-0932
Retaining Strap

142870932
478756: RNCC: 3 | RNVC: 2
20478756-9: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-529-9292
Access Cover

145299292
2114-551: RNCC: 3 | RNVC: 9

19 Apr 2002

5340-14-452-8534
Rod End Clevis

144528534
234271S: RNCC: 3 | RNVC: 2

22 Jan 1992

5340-14-359-1506
Access Hole Frame

143591506
1317463: RNCC: 3 | RNVC: 2
1317463: RNCC: 5 | RNVC: 2
1317463: RNCC: 5 | RNVC: 9

7 Sep 1979

5340-14-354-7317
Access Cover

143547317
110135: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-429-9704
Access Cover

144299704
000200101300: RNCC: 3 | RNVC: 2

21 Feb 1989

5340-14-569-3842
Utility Access Door

145693842
7421748656: RNCC: 3 | RNVC: 2
21748656: RNCC: 5 | RNVC: 2

9 Sep 2011

5340-14-403-9150
Rod End Clevis

144039150
3120880: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-434-1913
Access Cover

144341913
550690: RNCC: 3 | RNVC: 2

12 Sep 1989

5340-14-468-6399
Rod End Clevis

144686399
008687222P: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-14-292-4218
Rod End Clevis

142924218
3042250: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-505-0187
Access Cover

145050187
7703074085: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-396-3086
Anchor Strap

143963086
4771502090: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-472-0989
Access Cover

144720989
CA16074: RNCC: 3 | RNVC: 2

5 Oct 1994

5340-14-484-8992
Access Cover

144848992
189316-205: RNCC: 3 | RNVC: 9

12 Dec 1996

5340-14-507-6901
Angle Bracket

145076901
10383293: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-540-1629
Loop Clamp

145401629
FIX COM036: RNCC: 3 | RNVC: 2

11 Mar 2004

5340-14-549-7893
Access Cover

145497893
W004340631: RNCC: 3 | RNVC: 2

12 May 2006

5340-14-470-7867
Spring Holder

144707867
6304/7B: RNCC: 3 | RNVC: 2
6304/7B: RNCC: 5 | RNVC: 2
91474001: RNCC: 5 | RNVC: 2

6 Jul 1994

5340-14-463-1681
Rod End Clevis

144631681
16380232: RNCC: 3 | RNVC: 2
16380232: RNCC: 5 | RNVC: 9

26 May 1993

5340-14-360-8153
Anchor Strap

143608153
4720-86: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-477-0427
Access Cover

144770427
45463877: RNCC: 3 | RNVC: 2

19 Jul 1995

5340-14-338-7078
Access Cover

143387078
45516A: RNCC: 3 | RNVC: 9
2227: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-434-9464
Access Cover

144349464
308312: RNCC: 3 | RNVC: 2

10 Oct 1989

5340-14-468-8068
Plug Button

144688068
160R742610-59: RNCC: 3 | RNVC: 2

23 Mar 1994

5340-14-434-2909
Access Cover

144342909
558955: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-502-6902
Access Cover

145026902
1028472: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-392-9749
Corner Brace

143929749
0000763876: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-554-8460
Bumper

145548460
213709: RNCC: 3 | RNVC: 2

30 Aug 2007

5340-14-398-7947
Angle Bracket

143987947
5000257178: RNCC: 3 | RNVC: 2
5000257178: RNCC: 5 | RNVC: 9

20 Feb 1985

5340-14-452-3672
Block Clamp

144523672
11211556068: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-546-6256
Angle Bracket

145466256
RA1M705954111A1N1: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-14-439-5007
Rod End Clevis

144395007
H107822: RNCC: 3 | RNVC: 2
89232250: RNCC: 5 | RNVC: 2

10 May 1990

5340-14-388-7992
Rod End Clevis

143887992
418101207: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-485-2818
Access Cover

144852818
419703: RNCC: 3 | RNVC: 2
419703: RNCC: 5 | RNVC: 2

15 Jan 1997

5340-14-551-2660
Retaining Strap

145512660
RA1M701712121: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-537-1920
Utility Access Door

145371920
L72ZMZ1Z0H60300: RNCC: 3 | RNVC: 2

14 Oct 2003

5340-14-411-7930
Retaining Strap

144117930
5172024800: RNCC: 3 | RNVC: 2
720248: RNCC: 5 | RNVC: 9

3 Sep 1986

5340-14-439-2090
Access Cover

144392090
16007574: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-527-7527
Retaining Strap

145277527
710213: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-14-394-9535
Anchor Strap

143949535
29665044: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-454-0901
Mounting Plate

144540901
16930758: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-549-0922
Angle Bracket

145490922
RA1M704135511N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-479-3388
Eye Hook

144793388
0850450N00: RNCC: 3 | RNVC: 2

10 Jan 1996

5340-14-395-2659
Rod End Clevis

143952659
C3387-062F2: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-551-8912
Mounting Bracket

145518912
0025836: RNCC: 3 | RNVC: 2

7 Nov 2006

5340-14-423-6630
Clamping Catch

144236630
GP.8-ZB: RNCC: 3 | RNVC: 2
GP08ZB: RNCC: 5 | RNVC: 2
5000917043: RNCC: 5 | RNVC: 2

26 Apr 1988

5340-14-360-6816
Retaining Strap

143606816
45426: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-520-2158
Access Cover

145202158
207470-1: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-303-5515
Retaining Strap

143035515
F702-042: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-301-5399
Rim Lock Set

143015399
1115-50: RNCC: 3 | RNVC: 2
880-70X50: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-495-6485
Mending Plate

144956485
U35228-59: RNCC: 3 | RNVC: 2
F300 0T 019 5766: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-539-7449
Mounting Plate

145397449
21034058-00: RNCC: 3 | RNVC: 2
21034058-1: RNCC: 5 | RNVC: 2

5 Feb 2004

5340-14-531-2276
Mounting Bracket

145312276
341A68-5018-22: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-472-7541
Bridge Clamp

144727541
332A57-2183-20: RNCC: 3 | RNVC: 2

9 Nov 1994

5340-14-334-2188
Bumper

143342188
60210003: RNCC: 3 | RNVC: 2
14-60210003: RNCC: 5 | RNVC: 9

23 Apr 1976

5340-14-301-4490
Butt Hinge

143014490
J36-220-140X70GLAIT0N: RNCC: 2 | RNVC: 2

1 Jan 1973

5340-14-317-2844
Bumper

143172844
1724-0-16: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-459-2913
Luggage Handle

144592913
MAT685-0138: RNCC: 3 | RNVC: 2

19 Nov 1992

5340-14-360-6785
Runner

143606785
NO PRIMARY REF14-360-6785: RNCC: 3 | RNVC: 2
52376: RNCC: 5 | RNVC: 9

19 Dec 1979

5340-14-388-9621
Mounting Plate

143889621
ST159-2M831-6P5: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-502-3452
Pipe Hanger

145023452
307-804-203-0: RNCC: 3 | RNVC: 2

9 Dec 1997

5340-14-373-9837
Access Cover

143739837
8740114-001: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-365-7228
Butt Hinge

143657228
72-7-3329: RNCC: 3 | RNVC: 2
574020048: RNCC: 5 | RNVC: 2

8 Oct 1980

5340-14-524-4866
Mounting Plate

145244866
ST159-2M781P74: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-222-3024
Angle Bracket

142223024
0000473887: RNCC: 3 | RNVC: 2
0000473887: RNCC: 5 | RNVC: 9
473887: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-520-3116
Lock Bolt

145203116
23194695-6: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-377-0826
Cover Strip

143770826
330A76-3216-20: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-312-6235
Rod End Connector

143126235
9385-4: RNCC: 3 | RNVC: 2
85-601-4472: RNCC: 6 | RNVC: 9

1 Jan 1974

5340-14-346-1657
Bail Handle

143461657
NO PRIMARY REF14-346-1657: RNCC: 3 | RNVC: 2
304: RNCC: 5 | RNVC: 9

12 Dec 1977

5340-14-298-8547
Angle Bracket

142988547
NO PRIMARY REF14-298-8547: RNCC: 3 | RNVC: 2
1214005: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-315-7325
Angle Bracket

143157325
321A75-7171-21: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-454-6964
Blank Panel

144546964
2085-03-023: RNCC: 3 | RNVC: 2
89411642: RNCC: 5 | RNVC: 9

9 Apr 1992

5340-14-544-3014
Butt Hinge

145443014
708120S112-12A: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-14-483-3655
Runner

144833655
EPA211G0004: RNCC: 3 | RNVC: 2
401258: RNCC: 3 | RNVC: 2
401258-001: RNCC: 5 | RNVC: 9

5 Sep 1996

5340-14-307-2442
Cover Strip

143072442
3160S25-21-032-51: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-449-8304
Mounting Plate

144498304
993-04-01-03: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-14-432-8446
Mounting Bracket

144328446
NO PRIMARY REF14-432-8446: RNCC: 3 | RNVC: 2
509906: RNCC: 5 | RNVC: 9
509906: RNCC: 5 | RNVC: 9

28 Jun 1989

5340-14-340-0390
Bumper

143400390
SM3-01-02-07: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-405-7870
Loop Clamp

144057870
102671-099: RNCC: 3 | RNVC: 9

4 Dec 1985

5340-14-385-5936
Angle Bracket

143855936
CRP23-11-32: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-440-1260
Control Rod

144401260
MAT214-0123F31: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-292-5534
Rod End Clevis

142925534
121E26-800-11-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-308-6573
Angle Bracket

143086573
A10-69-116-10-0: RNCC: 3 | RNVC: 2
A10-69-116-10-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-218-6005
Snap Hook

142186005
4881-26: RNCC: 3 | RNVC: 2
4881-5: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-394-4003
Cover Strip

143944003
366A25-0027-21: RNCC: 3 | RNVC: 2
366A250027-21: RNCC: 5 | RNVC: 2

28 Aug 1984

5340-14-400-8033
Support Hook

144008033
330A41-2206-20: RNCC: 3 | RNVC: 2
330A-41.2206-20: RNCC: 5 | RNVC: 2

21 May 1985

5340-14-426-3999
Retaining Strap

144263999
Z100-015: RNCC: 3 | RNVC: 2

27 Aug 1988

5340-14-549-8949
Mounting Plate

145498949
94079-1104: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-404-0206
Mounting Plate

144040206
300-706-102-0: RNCC: 3 | RNVC: 2
001658020A: RNCC: 5 | RNVC: 2

11 Sep 1985

5340-14-259-5105
Runner

142595105
RU761-43M211-1P14A: RNCC: 3 | RNVC: 2
761-43M211-1P14A: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-512-5505
Section Block Clamp

145125505
F706-99-02: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-528-1385
Bow Handle

145281385
107256: RNCC: 3 | RNVC: 2

20 Dec 2001

5340-14-488-1564
Angle Bracket

144881564
0320737270: RNCC: 3 | RNVC: 2

18 Apr 1997

5340-14-302-9089
Handwheel

143029089
GSM1814REP1: RNCC: 3 | RNVC: 2
GSM1814DET1: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-478-1237
Shelf Bracket

144781237
RA1M240000440: RNCC: 3 | RNVC: 2

11 Oct 1995

5340-14-520-1673
Mounting Plate

145201673
20856461: RNCC: 3 | RNVC: 2
20856461: RNCC: 3 | RNVC: 9

17 May 2000

5340-14-408-3163
Control Rod

144083163
15793: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-220-3419
Angle Bracket

142203419
B248158: RNCC: 3 | RNVC: 2
503067: RNCC: 5 | RNVC: 2
0851571500: RNCC: 5 | RNVC: 2
248158: RNCC: 5 | RNVC: 9
76551: RNCC: 5 | RNVC: 9
DBAB248158: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-526-5812
Mounting Plate

145265812
742169: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-563-5727
Utility Access Door

145635727
ES304008A: RNCC: 3 | RNVC: 2

23 Feb 2010

5340-14-516-6604
Mounting Plate

145166604
46945405: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-14-529-0646
Mounting Bracket

145290646
10632713: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-14-530-2396
Mounting Bracket

145302396
F00187785: RNCC: 3 | RNVC: 2
F00187785: RNCC: 5 | RNVC: 9

22 May 2002

5340-14-508-5279
Mounting Bracket

145085279
10489333: RNCC: 3 | RNVC: 2

16 Sep 1998

5340-14-466-7506
Access Cover

144667506
45025953: RNCC: 3 | RNVC: 2
45025953: RNCC: 3 | RNVC: 9

24 Nov 1993

5340-14-370-7207
Rod End Clevis

143707207
199564: RNCC: 3 | RNVC: 2
89301964: RNCC: 5 | RNVC: 2

5 Jun 1981

5340-14-357-8404
Access Cover

143578404
5000118097: RNCC: 3 | RNVC: 2
5000118097: RNCC: 5 | RNVC: 9

20 Jul 1979

5340-14-351-2289
Angle Bracket

143512289
483086T: RNCC: 3 | RNVC: 2
483086T: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-526-1899
Mounting Bracket

145261899
47148484: RNCC: 3 | RNVC: 2

9 Jul 2001

5340-14-483-9829
Mounting Plate

144839829
1090274W00: RNCC: 3 | RNVC: 2

16 Oct 1996

5340-14-550-9219
Angle Bracket

145509219
RA1B702446039: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-530-4845
Access Cover

145304845
TM0963G001: RNCC: 3 | RNVC: 2

17 Jun 2002

5340-14-491-6580
Mounting Plate

144916580
KF3585G: RNCC: 3 | RNVC: 2
F300 0T 003 7751: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-460-8573
Mounting Plate

144608573
0LD502-810: RNCC: 3 | RNVC: 2

10 Feb 1993

5340-14-450-6589
Mounting Bracket

144506589
622815: RNCC: 3 | RNVC: 2

16 Oct 1991

5340-14-517-9217
Bow Handle

145179217
PM1A711270031A1: RNCC: 3 | RNVC: 2
PM1A711270031A1: RNCC: 5 | RNVC: 2

18 Jan 2000

5340-14-528-3474
Loop Clamp

145283474
8824407: RNCC: 3 | RNVC: 2

23 Jan 2002

5340-14-549-1884
Hinge Torsion Bar

145491884
212681: RNCC: 3 | RNVC: 2

7 Mar 2006

5340-14-488-9105
Pipe Hanger

144889105
COULI91965X00: RNCC: 3 | RNVC: 2

11 Jun 1997

5340-14-533-5437
Mounting Bracket

145335437
F1261985: RNCC: 3 | RNVC: 2

10 Feb 2003

5340-14-432-8675
Mounting Plate

144328675
8165152: RNCC: 3 | RNVC: 2

28 Jun 1989

5340-14-467-7952
Mounting Bracket

144677952
MB2119F00: RNCC: 3 | RNVC: 2

27 Jan 1994

5340-14-539-3143
Mounting Bracket

145393143
T651G3001229: RNCC: 3 | RNVC: 2

22 Dec 2003

5340-14-292-7905
Runner

142927905
PMM163: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-461-9943
Buckle

144619943
IF006062: RNCC: 3 | RNVC: 9
RAR0800: RNCC: 5 | RNVC: 2
00110845H: RNCC: 5 | RNVC: 2

31 Mar 1993

5340-14-272-8565
Angle Bracket

142728565
9131452: RNCC: 3 | RNVC: 2
9131452: RNCC: 3 | RNVC: 9

1 Jan 1971

5340-14-529-8582
Butt Hinge

145298582
CHARN91196X00: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-476-6721
Mounting Plate

144766721
45463824: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-14-545-4435
Angle Bracket

145454435
RA1B701486521: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-336-0913
Detent Plunger

143360913
16320703: RNCC: 3 | RNVC: 2
16320703: RNCC: 5 | RNVC: 9

24 Jul 1976

5340-14-393-4317
Access Cover

143934317
0288450220: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-445-5108
Mounting Bracket

144455108
ST406M71P11E50: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-351-3692
Retaining Strap

143513692
501-803-747-0: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-389-5483
Retaining Clip

143895483
365A87-3122-31: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-413-1550
Mending Plate

144131550
23118585-5: RNCC: 3 | RNVC: 2
23118585: RNCC: 5 | RNVC: 2

26 Nov 1986

5340-14-550-0505
Access Cover

145500505
46241740: RNCC: 3 | RNVC: 2

31 May 2006

5340-14-489-6628
Loop Clamp

144896628
332P61-5537-00: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-444-7813
Mounting Plate

144447813
OPT16: RNCC: 3 | RNVC: 2
RAR3479: RNCC: 5 | RNVC: 2

22 Jan 1991

5340-14-422-7146
Bumper

144227146
689-44555-00: RNCC: 3 | RNVC: 2

17 Mar 1988

5340-14-553-8476
Utility Access Door

145538476
E18553: RNCC: 3 | RNVC: 2

23 May 2007

5340-14-255-5014
Rod End Clevis

142555014
321A76-0166-20: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-524-2051
Mounting Bracket

145242051
234-00A2250617Y00: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-453-9976
Angle Bracket

144539976
TB30-47090-100: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-524-0668
Access Cover

145240668
8024573Y00: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-14-428-7637
Bridge Clamp

144287637
A02796-02-1110P008: RNCC: 3 | RNVC: 2

17 Dec 1988

5340-14-464-8885
Mounting Bracket

144648885
312-06366-001: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-378-8301
Angle Bracket

143788301
A21A221176392A2: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-545-8944
Mounting Plate

145458944
22360024-6: RNCC: 3 | RNVC: 2

25 May 2005

5340-14-312-0512
Angle Bracket

143120512
23023170: RNCC: 3 | RNVC: 2
23023170-2: RNCC: 5 | RNVC: 2
EF13: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-505-7308
Metal Grille

145057308
55423: RNCC: 3 | RNVC: 2
228-8296: RNCC: 5 | RNVC: 2

26 Mar 1998

5340-14-533-4066
Loop Clamp

145334066
NO PRIMARY REF14-533-4066: RNCC: 3 | RNVC: 2
0181765: RNCC: 5 | RNVC: 9

4 Feb 2003

5340-14-460-1559
Rod End Clevis

144601559
2301-0074-001: RNCC: 3 | RNVC: 2

13 Jan 1993

5340-14-489-4060
Lock-Release Lever

144894060
J05190-00-0900P003: RNCC: 3 | RNVC: 2

16 Jul 1997

5340-14-458-8904
Anchor Strap

144588904
401345: RNCC: 3 | RNVC: 2
BGE401345: RNCC: 5 | RNVC: 2

5 Nov 1992

5340-14-549-4334
Mounting Bracket

145494334
21241606-5: RNCC: 3 | RNVC: 2

3 Apr 2006

5340-14-364-3455
Butt Hinge

143643455
938258001082: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-518-1254
Mounting Plate

145181254
5000736289: RNCC: 3 | RNVC: 2
5000736289: RNCC: 3 | RNVC: 9

26 Jan 2000

5340-14-394-8189
Quick Release Pin

143948189
M4ZS480D2223A: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-261-9383
Retaining Strap

142619383
15913127: RNCC: 3 | RNVC: 2
15913127: RNCC: 3 | RNVC: 2
M913127: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-278-5197
Clamping Catch

142785197
40229-7: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-522-2986
Spring Holder

145222986
27160896-8: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-14-303-4803
Loop Clamp

143034803
501-779-775-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-388-8134
Mending Plate

143888134
11-989-200: RNCC: 3 | RNVC: 2
11-989-200: RNCC: 5 | RNVC: 9

29 Nov 1983

5340-14-455-9260
Cover Strip

144559260
PM1A231140081A1: RNCC: 3 | RNVC: 2
PM1A231140081A1: RNCC: 5 | RNVC: 2
85-801-3059: RNCC: 6 | RNVC: 9

11 Jun 1992

5340-14-312-0751
Rod End Clevis

143120751
4C000992-00: RNCC: 3 | RNVC: 2
4C000992-00: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-302-0106
Angle Bracket

143020106
A10-19-415-66-2: RNCC: 3 | RNVC: 2
A10-19-415-66-2: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-340-2445
Lock-Release Lever

143402445
911422: RNCC: 3 | RNVC: 2
911422: RNCC: 5 | RNVC: 9

14 Feb 1977

5340-14-553-7333
Runner

145537333
SHS20LC1SSC1+400L: RNCC: 3 | RNVC: 2

15 May 2007

5340-14-394-2960
Access Cover

143942960
M4ZS460D2063A: RNCC: 3 | RNVC: 2

28 Aug 1984

5340-14-249-7097
Rod End Connector

142497097
41331: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-442-7810
Arched Cushion

144427810
BA30089050-114,3: RNCC: 2 | RNVC: 2

5 Nov 1990

5340-14-257-9252
Angle Bracket

142579252
NO PRIMARY REF14-257-9252: RNCC: 3 | RNVC: 2
642022A: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-546-0477
Mounting Bracket

145460477
10666115000: RNCC: 3 | RNVC: 2

8 Jun 2005

5340-14-481-3684
Mounting Bracket

144813684
10283436: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-462-8944
Bumper

144628944
008566105: RNCC: 3 | RNVC: 9
8566105: RNCC: 5 | RNVC: 9

5 May 1993

5340-14-534-8843
Mounting Bracket

145348843
0102000004: RNCC: 3 | RNVC: 2

11 Apr 2003

5340-14-265-7094
Synchro Clamp

142657094
S2684: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-484-5208
Access Cover

144845208
233368: RNCC: 3 | RNVC: 2

21 Nov 1996

5340-14-382-5788
Angle Bracket

143825788
20071783: RNCC: 3 | RNVC: 2
20071783: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-345-4343
Corner Brace

143454343
95A12813: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-496-3755
Mounting Plate

144963755
188733: RNCC: 3 | RNVC: 2
F300 0T 021 4633: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-310-0116
Retaining Strap

143100116
S280188: RNCC: 3 | RNVC: 2
S280188: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-524-4170
Access Cover

145244170
FH206000200: RNCC: 3 | RNVC: 2

15 Mar 2001

5340-14-258-0480
Mending Plate

142580480
780C16A: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-503-9960
Mounting Bracket

145039960
SUPPO90453X00: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-14-548-8818
Access Cover

145488818
54300073: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-14-384-7792
Access Cover

143847792
16662415: RNCC: 3 | RNVC: 2
16662415: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-458-8698
Access Cover

144588698
39143864: RNCC: 3 | RNVC: 2

5 Nov 1992

5340-14-453-2486
Plug Button

144532486
37369: RNCC: 3 | RNVC: 2

12 Feb 1992

5340-14-224-0780
Retaining Strap

142240780
502-706-056-0: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-323-4768
Access Cover

143234768
6104112230: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-414-5496
Access Cover

144145496
TH20B906: RNCC: 3 | RNVC: 2

11 Feb 1987

5340-14-328-0671
Anchor Strap

143280671
000MA0427F4REPAH49L34: RNCC: 3 | RNVC: 2
000MA427F32REPAH49L34: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-321-0080
Access Cover

143210080
15144907: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-545-4802
Access Cover

145454802
61560151: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-14-442-8704
Synchro Clamp

144428704
16589410: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-14-397-5688
Bumper

143975688
0000651992: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-446-0326
Mounting Bracket

144460326
613100: RNCC: 3 | RNVC: 2

4 Mar 1991

5340-14-551-2576
Cover Strip

145512576
RA1A701916441A1: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-376-4542
Butt Hinge

143764542
16379100: RNCC: 3 | RNVC: 2
16379100: RNCC: 5 | RNVC: 9
16379100: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-418-6759
Angle Bracket

144186759
144482: RNCC: 3 | RNVC: 2

9 Sep 1987

5340-14-469-5051
Runner

144695051
5010046716: RNCC: 3 | RNVC: 2

27 Apr 1994

5340-14-487-5608
Pipe Hanger

144875608
RA1M701732104: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-410-8444
Angle Bracket

144108444
CSZ475: RNCC: 3 | RNVC: 2
CSZ475: RNCC: 5 | RNVC: 2
CSZ475: RNCC: 5 | RNVC: 2

16 Jul 1986

5340-14-376-4259
Loop Clamp

143764259
2044: RNCC: 3 | RNVC: 2
4895090: RNCC: 5 | RNVC: 2
1108844E00: RNCC: 5 | RNVC: 2

30 Mar 1982

5340-14-413-9885
Retaining Strap

144139885
BJM08860: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-523-2870
Retaining Band

145232870
RA1M701926311: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-377-1056
Mounting Bracket

143771056
16787803: RNCC: 3 | RNVC: 2
16787803: RNCC: 5 | RNVC: 9
16787803: RNCC: 5 | RNVC: 9

17 May 1982

5340-14-533-5821
Fusible Plug

145335821
231672: RNCC: 3 | RNVC: 2
FU072089: RNCC: 6 | RNVC: 9

12 Feb 2003

5340-14-411-4346
Wiring Harness

144114346
A11A822110120: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-551-2672
Angle Bracket

145512672
RA1M701327191N1: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-441-1130
Retaining Strap

144411130
20329923: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-461-5261
Protection Bellows

144615261
E831BE200007A: RNCC: 3 | RNVC: 2

15 Mar 1993

5340-14-302-6733
Slide Keeper

143026733
001921: RNCC: 3 | RNVC: 2
01787: RNCC: 3 | RNVC: 9
1921: RNCC: 3 | RNVC: 9
1921: RNCC: 5 | RNVC: 9
210020: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-373-8282
Bow Handle

143738282
GM320: RNCC: 3 | RNVC: 2

13 Nov 1981

5340-14-381-3458
Bumper

143813458
48816: RNCC: 3 | RNVC: 9

25 Jan 1983

5340-14-266-1517
Bumper

142661517
C244935: RNCC: 3 | RNVC: 2
540220: RNCC: 5 | RNVC: 2
26244935: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-541-5289
Angle Bracket

145415289
1091604: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-478-7521
Anchor Strap

144787521
5000670725: RNCC: 3 | RNVC: 2

20 Nov 1995

5340-14-491-8338
Access Cover

144918338
007149378P: RNCC: 3 | RNVC: 2
F300 0T 004 3403: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-418-1328
Access Cover

144181328
059580D01TRA: RNCC: 3 | RNVC: 2
059580D: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-489-8154
Mounting Bracket

144898154
009299378P: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-14-430-5739
Cover Strip

144305739
PM1A227000009: RNCC: 3 | RNVC: 2
PM1A227000009: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-512-5502
Section Block Clamp

145125502
F706-92-02: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-368-5253
Loop Clamp

143685253
94AM023: RNCC: 3 | RNVC: 2
85-691-5153: RNCC: 6 | RNVC: 9

20 Feb 1981

5340-14-408-7017
Loop Clamp

144087017
NO PRIMARY REF14-408-7017: RNCC: 3 | RNVC: 2
55-51: RNCC: 5 | RNVC: 9

2 Apr 1986

5340-14-360-8314
Retaining Strap

143608314
NO PRIMARY REF14-360-8314: RNCC: 3 | RNVC: 2
003124005: RNCC: 5 | RNVC: 9
3124005: RNCC: 5 | RNVC: 9

19 Dec 1979

5340-14-463-7938
Stand Base

144637938
21384336-00: RNCC: 3 | RNVC: 2

30 Jun 1993

5340-14-529-1598
Mounting Plate

145291598
457-13504-000: RNCC: 3 | RNVC: 2

13 Mar 2002

5340-14-360-6775
Webbing Strap

143606775
5431-3900: RNCC: 3 | RNVC: 2
5431-39: RNCC: 5 | RNVC: 2
063886: RNCC: 5 | RNVC: 2
NBC10AHE427: RNCC: 5 | RNVC: 2

19 Dec 1979

5340-14-505-2010
Access Cover

145052010
5801392-10521: RNCC: 3 | RNVC: 2

13 Mar 1998

5340-14-407-8255
Access Cover

144078255
121-0010-01-03-03: RNCC: 3 | RNVC: 2
85-693-1084: RNCC: 6 | RNVC: 9

5 Mar 1986

5340-14-490-5744
Plug Button

144905744
365A68-8018-20: RNCC: 3 | RNVC: 2

2 Oct 1997

5340-14-490-2880
Mounting Plate

144902880
J05085-04-0400P009: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-551-7668
Mounting Plate

145517668
110E020-00: RNCC: 3 | RNVC: 2

20 Oct 2006

5340-14-476-6662
Mounting Bracket

144766662
1VF1-CH1-03-11-000: RNCC: 3 | RNVC: 2
1VF03-11-000: RNCC: 5 | RNVC: 2
IVF03-11-000: RNCC: 5 | RNVC: 2

28 Jun 1995

5340-14-470-1581
Loop Clamp

144701581
330A87-3237-01: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-14-256-8336
Retaining Strap

142568336
M00268-75: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-404-0423
Rim Lock Set

144040423
366A25-1201-02: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-536-1422
Mounting Bracket

145361422
4518-1048: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-496-8272
Mounting Plate

144968272
B03-4027: RNCC: 3 | RNVC: 2
F300 0T 022 1647: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-249-3793
Retaining Strap

142493793
321A57-0498-20: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-533-7198
Pawl Fastener

145337198
1022-U16: RNCC: 3 | RNVC: 2

19 Feb 2003

5340-14-396-2778
Access Cover

143962778
3511 998 30831: RNCC: 3 | RNVC: 2
13407-4: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-541-4640
Cane Bolt

145414640
1SH41771325: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-353-6229
Retaining Clip

143536229
1011-4: RNCC: 3 | RNVC: 2
42821: RNCC: 5 | RNVC: 2

16 Jan 1979

5340-14-282-5048
Retaining Band

142825048
18773: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-497-0571
Mounting Plate

144970571
5509-055: RNCC: 3 | RNVC: 2
F300 0T 022 6135: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-500-4219
Flush Catch Claw

145004219
23194342-6: RNCC: 3 | RNVC: 2
F300 0T 024 4322: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-361-5248
Control Rod

143615248
GSM173-019F55: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-407-3846
Access Cover

144073846
42392: RNCC: 3 | RNVC: 2

12 Feb 1986

5340-14-362-5342
Access Cover

143625342
215083: RNCC: 3 | RNVC: 2

19 Mar 1980

5340-14-268-9921
Handwheel

142689921
000MA1055F2REP1: RNCC: 3 | RNVC: 2
000MA0060F6-2C1: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-505-3427
Loop Clamp

145053427
RSGU1-33-20-W1: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-465-8396
Access Cover

144658396
39527812: RNCC: 3 | RNVC: 2
39527812: RNCC: 5 | RNVC: 9

14 Oct 1993

5340-14-351-0112
Access Cover

143510112
214875: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-466-6972
Runner

144666972
820389B16: RNCC: 3 | RNVC: 2

24 Nov 1993

5340-14-459-0056
Dashpot

144590056
10-5003: RNCC: 3 | RNVC: 2
KON10-5003: RNCC: 5 | RNVC: 9

11 Nov 1992

5340-14-396-3475
Butt Hinge

143963475
50-7-3351: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-554-5341
Snap Hook

145545341
4,0D: RNCC: 3 | RNVC: 2

18 Jul 2007

5340-14-521-2902
Access Cover

145212902
10487736: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-496-9163
Mounting Plate

144969163
490127-32020-43: RNCC: 3 | RNVC: 2
F300 0T 022 2660: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-282-8734
Angle Bracket

142828734
NO PRIMARY REF14-282-8734: RNCC: 3 | RNVC: 2
S267018: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-374-4906
Angle Bracket

143744906
A11A221220072: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-501-6398
Mounting Plate

145016398
98204: RNCC: 3 | RNVC: 2

5 Nov 1997

5340-14-318-0516
Mending Plate

143180516
0213660050: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-547-7204
Mounting Bracket

145477204
100 765 49: RNCC: 3 | RNVC: 2
AA018073: RNCC: 6 | RNVC: 9

7 Nov 2005

5340-14-517-8215
Mounting Plate

145178215
S4573094: RNCC: 3 | RNVC: 2

13 Jan 2000

5340-14-458-0026
Webbing Strap

144580026
332542: RNCC: 3 | RNVC: 2
332542: RNCC: 5 | RNVC: 9

2 Oct 1992

5340-14-339-7762
Butt Hinge

143397762
15446501: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-414-2026
Retaining Strap

144142026
254330: RNCC: 3 | RNVC: 2
254330: RNCC: 5 | RNVC: 9

22 Jan 1987

5340-14-552-8219
Track Stop

145528219
F50B118002111: RNCC: 3 | RNVC: 2

5 Feb 2007

5340-14-466-3145
Mounting Bracket

144663145
39457982: RNCC: 3 | RNVC: 2
39457982: RNCC: 3 | RNVC: 9

3 Nov 1993

5340-14-392-9813
Angle Bracket

143929813
0000784703: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-387-8724
Pipe Hanger

143878724
0264217650: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-434-1780
Mounting Bracket

144341780
392786: RNCC: 3 | RNVC: 2
392786: RNCC: 5 | RNVC: 9

11 Sep 1989

5340-14-515-6312
Mounting Plate

145156312
5Q6458: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-534-5222
Mounting Bracket

145345222
6502EHA100003: RNCC: 3 | RNVC: 2

26 Mar 2003

5340-14-434-1775
Loop Holder

144341775
441068: RNCC: 3 | RNVC: 2
441068: RNCC: 5 | RNVC: 9

11 Sep 1989

5340-14-475-9102
Access Cover

144759102
0018300010: RNCC: 3 | RNVC: 2

10 May 1995

5340-14-383-4998
Access Cover

143834998
569338: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-514-1567
Mounting Bracket

145141567
2029: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-14-305-2197
Rod End Clevis

143052197
456335001: RNCC: 3 | RNVC: 9

1 Jan 1974

5340-14-371-2610
Retaining Strap

143712610
A26051540: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-436-7221
Angle Bracket

144367221
79112749: RNCC: 3 | RNVC: 2
79112749: RNCC: 5 | RNVC: 9

3 Jan 1990

5340-14-530-1234
Mounting Bracket

145301234
TB3050718: RNCC: 3 | RNVC: 2

14 May 2002

5340-14-512-6834
Loop Clamp

145126834
5010267637: RNCC: 3 | RNVC: 2

19 Feb 1999

5340-14-506-6841
Door Closer

145066841
FAA331G2: RNCC: 3 | RNVC: 2

6 May 1998

5340-14-378-8407
Angle Bracket

143788407
A11A221160651: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-511-9053
Butt Hinge

145119053
94166735: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-14-533-7998
Mounting Bracket

145337998
F1262806: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-507-4521
Mounting Plate

145074521
56089535: RNCC: 3 | RNVC: 2

8 Jul 1998

5340-14-548-1848
Split Tubular Clip

145481848
65519174: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-14-523-3196
Angle Bracket

145233196
CPR3B3104007: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-546-8607
Mounting Bracket

145468607
S713A2016316: RNCC: 3 | RNVC: 2

30 Aug 2005

5340-14-377-1062
Mounting Plate

143771062
16788318: RNCC: 3 | RNVC: 2
16788318: RNCC: 5 | RNVC: 9

17 May 1982

5340-14-545-1168
Mounting Bracket

145451168
086204Z: RNCC: 3 | RNVC: 2

18 Mar 2005

5340-14-413-9626
Retaining Strap

144139626
ST400S60P149: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-424-6318
Mounting Plate

144246318
0319401270: RNCC: 3 | RNVC: 2

2 Jun 1988

5340-14-297-7628
Retaining Clip

142977628
MS2-249: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-275-8510
Expansion Plug

142758510
NO PRIMARY REF14-275-8510: RNCC: 3 | RNVC: 2
106J549: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-345-2778
Loop Clamp

143452778
FF1E701-64: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-501-1523
Mounting Bracket

145011523
014-012-071: RNCC: 3 | RNVC: 2
014.012.071: RNCC: 3 | RNVC: 2
F300 0T 025 1925: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-301-1049
Pipe Hanger

143011049
330A75-2164-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-441-3826
Cover Strip

144413826
121A21-720-20-0: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-441-2069
Mounting Bracket

144412069
332A93-3114-21: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-464-4621
Strap Fastener Loop

144644621
IF006-079: RNCC: 3 | RNVC: 2
RAR5681: RNCC: 5 | RNVC: 2
IF006079: RNCC: 5 | RNVC: 9

4 Aug 1993

5340-14-347-5036
Bow Handle

143475036
19-1-3390: RNCC: 3 | RNVC: 2
1913390: RNCC: 5 | RNVC: 2
6628-160X40X8X16: RNCC: 5 | RNVC: 2

1 Mar 1978

5340-14-501-9648
Blank Panel

145019648
A10-74-818-11-0: RNCC: 3 | RNVC: 2
A10-74-818-11-0: RNCC: 5 | RNVC: 2

19 Nov 1997

5340-14-382-5612
Corner Brace

143825612
NO PRIMARY REF14-382-5612: RNCC: 3 | RNVC: 2
16497192: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-373-9983
Anchor Strap

143739983
7380-271: RNCC: 3 | RNVC: 9

8 Dec 1981

5340-14-320-0951
Rod End Clevis

143200951
106-28-17-1: RNCC: 3 | RNVC: 2
106-28-17-1: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-510-1101
Access Cover

145101101
F291-56RS1: RNCC: 3 | RNVC: 2
1560AA8007443: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-508-9411
Angle Bracket

145089411
05-01-0030: RNCC: 3 | RNVC: 2

7 Oct 1998

5340-14-452-1788
Rim Latch

144521788
1000U51U197U164-23-24-19: RNCC: 3 | RNVC: 2

18 Dec 1991

5340-14-341-1733
Access Cover

143411733
M3C702-50-02: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-357-9876
Retaining Strap

143579876
0294350400: RNCC: 3 | RNVC: 2
302-263-302P: RNCC: 5 | RNVC: 2

20 Jul 1979

5340-14-368-3519
Access Cover

143683519
22443504: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-14-364-5890
Retaining Strap

143645890
NO PRIMARY REF14-364-5890: RNCC: 3 | RNVC: 2
5000497722: RNCC: 5 | RNVC: 2
5000497722: RNCC: 5 | RNVC: 9
59-21-1318: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-541-1403
Mounting Bracket

145411403
3881A005: RNCC: 3 | RNVC: 2
3881A005: RNCC: 3 | RNVC: 2

14 May 2004

5340-14-536-1893
Access Cover

145361893
803229140110-01: RNCC: 3 | RNVC: 2

15 Jul 2003

5340-14-301-1021
Mending Plate

143011021
330A67-0661-20: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-447-3361
Rod End Clevis

144473361
45611493: RNCC: 3 | RNVC: 2
45611493: RNCC: 5 | RNVC: 9

15 May 1991

5340-14-466-5095
Blank Panel

144665095
10021244: RNCC: 3 | RNVC: 2

15 Nov 1993

5340-14-543-6210
Loop Clamp

145436210
SADDHP12: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-14-533-4678
Clamping Catch

145334678
55-702-815: RNCC: 3 | RNVC: 2
SZ55.702.815: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-442-9199
Access Cover

144429199
M4ZS747D1300A: RNCC: 3 | RNVC: 2
M4ZS747D1300: RNCC: 5 | RNVC: 2

7 Nov 1990

5340-14-321-6883
Access Cover

143216883
0235600020: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-296-7780
Angle Bracket

142967780
3028980: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-504-5488
Handwheel

145045488
2053NR: RNCC: 3 | RNVC: 2
91710071: RNCC: 5 | RNVC: 2

18 Feb 1998

5340-14-326-4105
Rod End Clevis

143264105
26329325: RNCC: 3 | RNVC: 2
C329325: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-298-8458
Webbing Strap

142988458
3407: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-454-0818
Angle Bracket

144540818
16285731: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-434-2930
Access Cover

144342930
562537: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-295-1799
Retaining Strap

142951799
155402: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-336-7158
Butt Hinge

143367158
184249: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-395-9849
Anchor Strap

143959849
0000776964: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-524-5056
Mounting Bracket

145245056
F1281624: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-380-6327
Angle Bracket

143806327
20255308: RNCC: 3 | RNVC: 2

29 Nov 1982

5340-14-401-1903
Angle Bracket

144011903
79099483: RNCC: 3 | RNVC: 2
79099483: RNCC: 5 | RNVC: 9

29 May 1985

5340-14-397-1783
Rod End Clevis

143971783
B128ABC37: RNCC: 3 | RNVC: 2
B128ABC37: RNCC: 5 | RNVC: 9

1 Dec 1984

5340-14-454-8787
Mounting Bracket

144548787
406537215: RNCC: 3 | RNVC: 9

24 Apr 1992

5340-14-553-4749
Mounting Plate

145534749
0319101180: RNCC: 3 | RNVC: 2

5 Apr 2007

5340-14-474-2348
Angle Bracket

144742348
1321-203A381: RNCC: 3 | RNVC: 2
1321-203A381: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-14-537-4979
Mounting Bracket

145374979
TD2310U: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-231-5900
Buckle

142315900
57382: RNCC: 3 | RNVC: 2
AB21: RNCC: 5 | RNVC: 2
50702: RNCC: 5 | RNVC: 9
AB21: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-360-1651
Angle Bracket

143601651
A11A221176360: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-470-3336
Access Hole Frame

144703336
203062: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-537-7862
Access Cover

145377862
RPL741200050B1: RNCC: 3 | RNVC: 2

25 Nov 2003

5340-14-325-9130
Key Blank

143259130
25511B10X20XC38: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-526-9597
Detent Plunger

145269597
10460913: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-361-1793
Mending Plate

143611793
0000406838: RNCC: 3 | RNVC: 2
0000406838: RNCC: 5 | RNVC: 9
406838: RNCC: 5 | RNVC: 9

24 Jan 1980

5340-14-473-3156
Access Cover

144733156
021B201: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-395-0719
Retaining Strap

143950719
D52444: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-324-0777
Access Cover

143240777
R35474SM: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-551-6995
Access Cover

145516995
4CW2144: RNCC: 3 | RNVC: 2

17 Oct 2006

5340-14-526-5825
Access Cover

145265825
DH1F293515: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-391-4991
Bumper

143914991
TH20A2019: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-314-3786
Angle Bracket

143143786
180466: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-518-1425
Bow Handle

145181425
5000822652: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-540-3089
Mounting Plate

145403089
10625065: RNCC: 3 | RNVC: 2

18 Mar 2004

5340-14-449-3207
Corner Brace

144493207
571A176: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-450-4975
Retaining Strap

144504975
BLC236478: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-14-544-9966
Bumper

145449966
708446: RNCC: 3 | RNVC: 2

14 Mar 2005

5340-14-532-6733
Mounting Bracket

145326733
19221387: RNCC: 3 | RNVC: 2

27 Nov 2002

5340-14-517-9415
Slide Keeper

145179415
AP121: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-14-410-8979
Retaining Strap

144108979
FTKF8B: RNCC: 3 | RNVC: 2
M4HZ745P2012: RNCC: 5 | RNVC: 2

23 Jul 1986

5340-14-456-9074
Blank Panel

144569074
30602305: RNCC: 3 | RNVC: 2
30602305: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-14-409-3604
Mounting Plate

144093604
530016: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-393-1251
Retaining Strap

143931251
02140012300: RNCC: 3 | RNVC: 2
021400123: RNCC: 5 | RNVC: 2

12 Apr 1984

5340-14-449-5767
Self-Locking Insert

144495767
110424-5B: RNCC: 3 | RNVC: 2

27 Aug 1991

5340-14-518-1561
Mounting Plate

145181561
5010054303: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-455-0918
Bumper

144550918
BC10S4B: RNCC: 3 | RNVC: 2

1 May 1992

5340-14-211-5322
Retaining Strap

142115322
FL147058: RNCC: 3 | RNVC: 2
141058: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-291-1291
Rod End Clevis

142911291
AA37-2-2: RNCC: 3 | RNVC: 2
AA37-2-2: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-536-1942
Strap Fastener Loop

145361942
23KMSWN34340800-3/4-F9/REP13: RNCC: 3 | RNVC: 2
SYQ3119: RNCC: 5 | RNVC: 2

15 Jul 2003

5340-14-526-5169
Rod End Connector

145265169
D66709: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-041-2417
Mortise Lock Set

140412417
5275TC1ET5086CHROMES: RNCC: 3 | RNVC: 2
5275TC1ET5293CHR0MES: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-266-2173
Loop Clamp

142662173
4075NA: RNCC: 3 | RNVC: 2
451908: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-532-3652
Runner

145323652
RA1M260513413N1: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-511-0785
Mortise Lock

145110785
2443024: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-14-436-2041
Mounting Plate

144362041
DA2C228554001A1: RNCC: 3 | RNVC: 2

6 Dec 1989

5340-14-520-2125
Mounting Bracket

145202125
531216D75: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-520-6102
Mounting Plate

145206102
45675169: RNCC: 3 | RNVC: 2

24 May 2000

5340-14-407-7813
Runner

144077813
1977A117: RNCC: 3 | RNVC: 2

5 Mar 1986

5340-14-451-2798
Bridge Clamp

144512798
0CV018270302: RNCC: 3 | RNVC: 2

6 Nov 1991

5340-14-426-7600
Friction Catch

144267600
571: RNCC: 3 | RNVC: 2

21 Sep 1988

5340-14-544-3582
Mounting Plate

145443582
S531A2041110: RNCC: 3 | RNVC: 2

24 Jan 2005

5340-14-444-1631
Rod End Connector

144441631
PM1A877500404: RNCC: 3 | RNVC: 2
PM1A877500404: RNCC: 5 | RNVC: 2

18 Dec 1990

5340-14-422-5746
Angle Bracket

144225746
37766: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-14-381-5508
Mounting Plate

143815508
398002050002: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-363-8976
Slide Keeper

143638976
69F2309: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-453-3597
Suction Cup

144533597
889: RNCC: 3 | RNVC: 2
3148512125006: RNCC: 5 | RNVC: 2
0212500: RNCC: 5 | RNVC: 9

19 Feb 1992

5340-14-430-5741
Cover Strip

144305741
PM1A227000011: RNCC: 3 | RNVC: 2
PM1A227000011: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-357-4703
Butt Hinge

143574703
A11B761510032: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-525-4789
Mounting Bracket

145254789
7700020443: RNCC: 3 | RNVC: 2
7700515586: RNCC: 5 | RNVC: 2

6 Jun 2001

5340-14-426-2304
Access Cover

144262304
23120202-3: RNCC: 3 | RNVC: 2

9 Aug 1988

5340-14-523-1786
Mounting Plate

145231786
4699713A: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-549-5408
Mounting Plate

145495408
AMPC GENE E223434: RNCC: 3 | RNVC: 2

13 Apr 2006

5340-14-502-6092
Mounting Bracket

145026092
5010165039: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-338-8785
Retaining Strap

143388785
AY182U16: RNCC: 3 | RNVC: 2
AY182U16-17: RNCC: 5 | RNVC: 2
0400410050: RNCC: 5 | RNVC: 2
650-791-034-0: RNCC: 5 | RNVC: 2
54363: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-457-4154
Mounting Plate

144574154
402239A-SG10137-Z2CND17-12: RNCC: 3 | RNVC: 2

3 Sep 1992

5340-14-468-5180
Protection Bellows

144685180
58170-3: RNCC: 3 | RNVC: 2
5870-3E: RNCC: 5 | RNVC: 2

3 Mar 1994

5340-14-434-1317
Mounting Bracket

144341317
332A67-1950-6101: RNCC: 3 | RNVC: 2

6 Sep 1989

5340-14-462-6179
Rod End Clevis

144626179
2089-10028: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-14-406-1043
Butt Hinge

144061043
400320251113: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-313-7056
Mounting Bracket

143137056
0064767330: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-505-4438
Mounting Bracket

145054438
12222027: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-515-4533
Pipe Hanger

145154533
26127804234: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-546-5902
Angle Bracket

145465902
RA1M701126421: RNCC: 3 | RNVC: 2

20 Jul 2005

5340-14-496-3724
Mounting Plate

144963724
184965: RNCC: 3 | RNVC: 2
F300 0T 021 4602: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-512-6915
Loop Clamp

145126915
A4080202: RNCC: 3 | RNVC: 2
A4080202: RNCC: 5 | RNVC: 9

19 Feb 1999

5340-14-305-6402
Retaining Strap

143056402
915-2-21-72: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-447-5024
Mounting Bracket

144475024
815-1-97-121: RNCC: 3 | RNVC: 2

27 May 1991

5340-14-523-5554
Access Cover

145235554
330A32-1122-03: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-14-332-1520
Clamping Catch

143321520
995CSANSCR0CHET: RNCC: 3 | RNVC: 2
V00369-11: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-281-3070
Loop Clamp

142813070
501-779-687-0: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-488-6521
Caster Frame

144886521
4011101E-13A: RNCC: 3 | RNVC: 2

28 May 1997

5340-14-482-5079
Pipe Hanger

144825079
PM1A722314100: RNCC: 3 | RNVC: 2
PM1A722314100: RNCC: 5 | RNVC: 2

11 Jul 1996

5340-14-547-5342
Mounting Bracket

145475342
RA1M704836111N1: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-261-7788
Handwheel

142617788
484509: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-446-8486
Detent Plunger

144468486
D56350: RNCC: 3 | RNVC: 2
D56350: RNCC: 5 | RNVC: 2

17 Apr 1991

5340-14-445-7810
Access Cover

144457810
BLC9350: RNCC: 3 | RNVC: 2

25 Feb 1991

5340-14-543-4283
Mounting Bracket

145434283
8046141C00: RNCC: 3 | RNVC: 2

28 Oct 2004

5340-14-443-8755
Loop Clamp

144438755
51120605014: RNCC: 3 | RNVC: 2
24FE14: RNCC: 5 | RNVC: 2

11 Dec 1990

5340-14-485-5444
Mounting Plate

144855444
20342214: RNCC: 3 | RNVC: 2

29 Jan 1997

5340-14-419-8173
Rod End Clevis

144198173
DA2C121317844: RNCC: 3 | RNVC: 2

5 Nov 1987

5340-14-529-4232
Access Cover

145294232
6501DCC1121: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-479-5731
Access Cover

144795731
23222136-6: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-14-455-0986
Locking Stay

144550986
21400B21538T2: RNCC: 3 | RNVC: 2

1 May 1992

5340-14-435-9122
Mounting Plate

144359122
39145693: RNCC: 3 | RNVC: 2

29 Nov 1989

5340-14-417-5333
Shimmy Damper

144175333
4107A428AREP306: RNCC: 3 | RNVC: 2
504802: RNCC: 5 | RNVC: 2

8 Jul 1987

5340-14-350-4897
Access Cover

143504897
216794: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-416-4655
Webbing Strap

144164655
532559: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-14-490-5954
Access Cover

144905954
03260000111849A: RNCC: 3 | RNVC: 2

2 Oct 1997

5340-14-537-7351
Mounting Bracket

145377351
PCS237C: RNCC: 3 | RNVC: 2

19 Nov 2003

5340-14-542-0263
Utility Access Door

145420263
20051-904: RNCC: 3 | RNVC: 2
502118010031A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-404-6610
Retaining Strap

144046610
5172024700: RNCC: 3 | RNVC: 2
720247: RNCC: 5 | RNVC: 9

20 Nov 1985

5340-14-427-8906
Butt Hinge

144278906
3144790: RNCC: 3 | RNVC: 2

19 Nov 1988

5340-14-517-8210
Mounting Bracket

145178210
S4572802: RNCC: 3 | RNVC: 2

13 Jan 2000

5340-14-501-1027
Angle Bracket

145011027
07209015105: RNCC: 3 | RNVC: 2
F300 0T 025 1415: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-529-4438
Mounting Plate

145294438
6501FSC110001: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-327-5626
Retaining Strap

143275626
573895923: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-351-1092
Bridge Clamp

143511092
6817417-032: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-547-1346
Stand Base

145471346
SBRD4013: RNCC: 3 | RNVC: 2

27 Sep 2005

5340-14-463-6911
Access Cover

144636911
11247-3E: RNCC: 3 | RNVC: 2

23 Jun 1993

5340-14-242-8763
Loop Clamp

142428763
364687: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-542-1908
Loop Clamp

145421908
571784208: RNCC: 3 | RNVC: 2
571784208: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-530-3069
Mounting Bracket

145303069
1211310: RNCC: 3 | RNVC: 2

29 May 2002

5340-14-497-4063
Mounting Plate

144974063
1012200: RNCC: 3 | RNVC: 2
1012200: RNCC: 5 | RNVC: 2
F300 0T 023 1350: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-527-6090
Mounting Plate

145276090
13200000021: RNCC: 3 | RNVC: 2
435740: RNCC: 5 | RNVC: 2

30 Oct 2001

5340-14-345-2910
Bumper

143452910
FB1A884-11823: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-485-9799
Angle Bracket

144859799
30640020: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-440-2220
Metal Grille

144402220
341039: RNCC: 3 | RNVC: 2
91604480: RNCC: 5 | RNVC: 2

11 Jul 1990

5340-14-478-1388
Mounting Plate

144781388
2709AB01303: RNCC: 3 | RNVC: 2

11 Oct 1995

5340-14-440-3300
Butt Hinge

144403300
332A65-1153-21: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-348-2990
Mending Plate

143482990
910SP1-0033: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-217-3297
Loop Clamp

142173297
3160S73-09-078: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-436-2670
Access Cover

144362670
H34234-65: RNCC: 3 | RNVC: 2

12 Dec 1989

5340-14-263-6069
Loop Clamp

142636069
NO PRIMARY REF14-263-6069: RNCC: 3 | RNVC: 2
1022981: RNCC: 5 | RNVC: 9
A22981: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-310-6200
Angle Bracket

143106200
AA7-62NF1-1732: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-529-9061
Access Cover

145299061
TAAI2-427091-20: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-505-0225
Bow Handle

145050225
496757: RNCC: 3 | RNVC: 2
5001834879: RNCC: 5 | RNVC: 2

11 Mar 1998

5340-14-454-5029
Runner

144545029
16243374: RNCC: 3 | RNVC: 2

2 Apr 1992

5340-14-458-7789
Mounting Bracket

144587789
MN03/09-49: RNCC: 3 | RNVC: 2
MN03/09-04-49: RNCC: 5 | RNVC: 2

3 Nov 1992

5340-14-517-8378
Mounting Plate

145178378
2618AA05405: RNCC: 3 | RNVC: 2

13 Jan 2000

5340-14-477-4231
Angle Bracket

144774231
45463527: RNCC: 3 | RNVC: 2

30 Aug 1995

5340-14-498-4511
Loop Clamp

144984511
91966110: RNCC: 3 | RNVC: 2
583PL100X115: RNCC: 3 | RNVC: 9
MUL583PL100X115: RNCC: 5 | RNVC: 9
F300 0T 005 1386: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-557-4110
Utility Resilient Mount

145574110
0945391008: RNCC: 3 | RNVC: 2

9 Jun 2008

5340-14-517-0026
Pipe Hanger

145170026
RA1M701810120: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-515-3397
Compression Cup

145153397
5023433861: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-555-8651
Mounting Bracket

145558651
82098012000: RNCC: 3 | RNVC: 2

19 Dec 2007

5340-14-481-3730
Angle Bracket

144813730
066161M: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-353-0381
Angle Bracket

143530381
A11A230127013: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-563-1124
Utility Resilient Mount

145631124
91091: RNCC: 3 | RNVC: 2
5218 123-60NR11: RNCC: 5 | RNVC: 2

4 Jan 2010

Load More Results