What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 36 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 36 of 446

5340-14-517-8798
Retaining Strap

145178798
446002000013: RNCC: 3 | RNVC: 2

17 Jan 2000

5340-14-488-5598
Loop Clamp

144885598
H3P: RNCC: 3 | RNVC: 2

21 May 1997

5340-14-458-5105
Bumper

144585105
6270-99223: RNCC: 3 | RNVC: 2

23 Oct 1992

5340-14-398-6435
Webbing Strap

143986435
E60-3M-B-307-1-30CM: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-494-7147
Bow Handle

144947147
NO PRIMARY REF14-494-7147: RNCC: 3 | RNVC: 2
1214069: RNCC: 5 | RNVC: 9
1214-069: RNCC: 5 | RNVC: 9
F300 0T 022 5492: RNCC: 6 | RNVC: 9
F300 0T 017 8235: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-424-0728
Mounting Plate

144240728
0551155-00A: RNCC: 3 | RNVC: 2
551155: RNCC: 5 | RNVC: 2

11 May 1988

5340-14-542-8980
Synchro Clamp

145428980
708110S100-16A: RNCC: 3 | RNVC: 2

14 Aug 2004

5340-14-415-4774
Access Cover

144154774
M517-200112: RNCC: 3 | RNVC: 2
M517200112: RNCC: 5 | RNVC: 9

18 May 1987

5340-14-465-5009
Mounting Bracket

144655009
365A72-1329-20: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-311-7528
Retaining Strap

143117528
0072-07-02REP25: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-380-5606
Angle Bracket

143805606
4B99W99-108: RNCC: 3 | RNVC: 2

29 Nov 1982

5340-14-305-0396
Retaining Strap

143050396
M3C701-19-810: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-553-3398
Mounting Plate

145533398
0625-503-300A: RNCC: 3 | RNVC: 2

26 Mar 2007

5340-14-545-8992
Mounting Plate

145458992
21229787-00: RNCC: 3 | RNVC: 2
21229787-9: RNCC: 5 | RNVC: 2

26 May 2005

5340-14-305-3147
Angle Bracket

143053147
NO PRIMARY REF14-305-3147: RNCC: 3 | RNVC: 2
118174: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-246-7669
Loop Clamp

142467669
NO PRIMARY REF14-246-7669: RNCC: 3 | RNVC: 2
5999088: RNCC: 5 | RNVC: 2
HD1300-12: RNCC: 5 | RNVC: 2
F17369-88: RNCC: 5 | RNVC: 2
F1736988: RNCC: 5 | RNVC: 2
HD1300-12: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-362-3780
Bumper

143623780
A224-03-31: RNCC: 3 | RNVC: 2
A224-03-31: RNCC: 3 | RNVC: 9

19 Mar 1980

5340-14-473-8374
Mounting Bracket

144738374
332A61-6441-01: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-365-2628
Angle Bracket

143652628
366A75-3064-20: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-482-9259
Pipe Hanger

144829259
78732-025-065A: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-374-1540
Mending Plate

143741540
NO PRIMARY REF14-374-1540: RNCC: 3 | RNVC: 2
H140AAB113: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-14-525-4972
Mounting Bracket

145254972
262-10-94126-12: RNCC: 3 | RNVC: 2

6 Jun 2001

5340-14-282-0798
Loop Clamp

142820798
14SD1094-12: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-522-9082
Mounting Plate

145229082
500-75-00-50: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-14-536-3410
Access Cover

145363410
42678-001-542: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-14-541-6261
Utility Access Door

145416261
1091266-001: RNCC: 3 | RNVC: 2

15 Jun 2004

5340-14-323-9234
Retaining Strap

143239234
244-18GRIS: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-554-5662
Snap Hook

145545662
512-4-05: RNCC: 3 | RNVC: 2

20 Jul 2007

5340-14-290-2168
Angle Bracket

142902168
330A22-2229-23: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-402-9214
Bumper

144029214
01-1004-24: RNCC: 3 | RNVC: 2
1004-24: RNCC: 5 | RNVC: 2
91577885: RNCC: 5 | RNVC: 2

25 Jul 1985

5340-14-224-0782
Mending Plate

142240782
501-990-374-0: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-506-9714
Loop Clamp

145069714
110000300: RNCC: 3 | RNVC: 2
11N03: RNCC: 5 | RNVC: 2
A0021-11N03: RNCC: 5 | RNVC: 2
ASNA0021-11N03: RNCC: 5 | RNVC: 2

27 May 1998

5340-14-340-7094
Bumper

143407094
7-103-00-7709: RNCC: 3 | RNVC: 2
85-644-4740: RNCC: 6 | RNVC: 9

14 Feb 1977

5340-14-428-5420
Detent Plunger

144285420
4601DMP104-0026: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-425-3539
Loop Clamp

144253539
50011-1-24: RNCC: 3 | RNVC: 2
NSA935807-24: RNCC: 5 | RNVC: 2
50011-1-24: RNCC: 5 | RNVC: 9

30 Jun 1988

5340-14-302-1204
Mending Plate

143021204
A10-74-107-95-0: RNCC: 3 | RNVC: 2
A10-74-107-95-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-549-9449
Mounting Bracket

145499449
35-065-60: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-416-0616
Quick Release Pin

144160616
151323-13: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-402-4854
Mounting Plate

144024854
PL35 1/8-70: RNCC: 3 | RNVC: 9
20150N2: RNCC: 5 | RNVC: 9

3 Jul 1985

5340-14-510-0340
Eye Hook

145100340
NO PRIMARY REF14-510-0340: RNCC: 3 | RNVC: 2
HWCEL50-61: RNCC: 5 | RNVC: 9
5340AA2026823: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-499-1961
Mounting Plate

144991961
5677 4133-002: RNCC: 3 | RNVC: 2
101006017020A: RNCC: 3 | RNVC: 9
F300 0T 019 7567: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-473-8575
Section Block Clamp

144738575
332A76-1200-20: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-470-5165
Plug Button

144705165
920 1010-01: RNCC: 3 | RNVC: 2
1091249D00: RNCC: 5 | RNVC: 2

22 Jun 1994

5340-14-526-0754
Arched Cushion

145260754
E1M370430: RNCC: 3 | RNVC: 2
MAT169-0024F3FORTERAIDEUR: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-14-358-3168
Mending Plate

143583168
7920014069: RNCC: 3 | RNVC: 2
8724-20: RNCC: 5 | RNVC: 2

13 Aug 1979

5340-14-479-8014
Loop Holder

144798014
11095T460114: RNCC: 3 | RNVC: 2

7 Feb 1996

5340-14-475-0271
Vent Plug

144750271
27101783-6: RNCC: 3 | RNVC: 2
476561B: RNCC: 5 | RNVC: 2
AMU476561B: RNCC: 5 | RNVC: 2

16 Mar 1995

5340-14-416-0636
Clamping Catch

144160636
G0F79ZB: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-412-9700
Cover Strip

144129700
DA2C525092500: RNCC: 3 | RNVC: 2

5 Nov 1986

5340-14-551-7507
Mounting Bracket

145517507
RA1M705536001: RNCC: 3 | RNVC: 2

19 Oct 2006

5340-14-420-4619
Access Cover

144204619
06156877: RNCC: 3 | RNVC: 2

10 Dec 1987

5340-14-485-6415
Access Cover

144856415
45154921: RNCC: 3 | RNVC: 2
45154921: RNCC: 5 | RNVC: 2

6 Feb 1997

5340-14-521-1388
Angle Bracket

145211388
010022041P: RNCC: 3 | RNVC: 2

12 Jul 2000

5340-14-554-3261
Access Cover

145543261
82187852000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-552-8108
Utility Access Door

145528108
82110767000: RNCC: 3 | RNVC: 2
82167898: RNCC: 5 | RNVC: 2

5 Feb 2007

5340-14-461-0026
Mounting Bracket

144610026
20860952: RNCC: 3 | RNVC: 2
20860952: RNCC: 3 | RNVC: 9

17 Feb 1993

5340-14-444-7319
Block Fairlead

144447319
3514415100: RNCC: 3 | RNVC: 2

21 Jan 1991

5340-14-331-2447
Retaining Strap

143312447
0235227940: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-530-6151
Utility Access Door

145306151
021309: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-14-485-2838
Plug Button

144852838
RP1B721410100: RNCC: 3 | RNVC: 2

15 Jan 1997

5340-14-235-2196
Rod End Clevis

142352196
STM156870: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-540-3091
Mounting Bracket

145403091
10620106: RNCC: 3 | RNVC: 2

18 Mar 2004

5340-14-385-8963
Anchor Strap

143858963
1106217600: RNCC: 3 | RNVC: 2
62176: RNCC: 5 | RNVC: 2

24 Aug 1983

5340-14-420-6438
Retaining Strap

144206438
3020359: RNCC: 3 | RNVC: 2

16 Dec 1987

5340-14-353-5173
Access Cover

143535173
11431-369-690: RNCC: 3 | RNVC: 2
11431-369-690: RNCC: 5 | RNVC: 2

16 Jan 1979

5340-14-520-2220
Mounting Bracket

145202220
P606787: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-312-9798
Access Cover

143129798
0426636500: RNCC: 3 | RNVC: 2
0426636500: RNCC: 3 | RNVC: 2
0426636500: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-436-4460
Access Cover

144364460
0298807740: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-374-6114
Anchor Strap

143746114
5000011616: RNCC: 3 | RNVC: 2
5000011616: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-461-0191
Section Block Clamp

144610191
16787418: RNCC: 3 | RNVC: 2
16787418: RNCC: 5 | RNVC: 9

17 Feb 1993

5340-14-352-6640
Access Cover

143526640
BY148A10173: RNCC: 3 | RNVC: 2
BFC10173: RNCC: 5 | RNVC: 2

14 Nov 1978

5340-14-543-9799
Utility Access Door

145439799
4773302500: RNCC: 3 | RNVC: 9

19 Dec 2004

5340-14-031-8839
Anchor Strap

140318839
573905266: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-473-9457
Access Cover

144739457
39252208: RNCC: 3 | RNVC: 2
39252208: RNCC: 3 | RNVC: 9

18 Jan 1995

5340-14-381-0638
Rod End Clevis

143810638
4049589: RNCC: 3 | RNVC: 2
4049589: RNCC: 5 | RNVC: 9

14 Dec 1982

5340-14-506-0477
Access Cover

145060477
DB1E212302401: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-14-397-9127
Access Cover

143979127
473041A: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-397-8207
Rod End Clevis

143978207
M4ZS763D1800A: RNCC: 3 | RNVC: 2
M35GAUCHE: RNCC: 5 | RNVC: 2

31 Jan 1985

5340-14-554-5799
Access Cover

145545799
SP01003583A: RNCC: 3 | RNVC: 2

23 Jul 2007

5340-14-517-8628
Access Cover

145178628
1CN10755064: RNCC: 3 | RNVC: 2

14 Jan 2000

5340-14-450-4674
Butt Hinge

144504674
20706193: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-14-476-5342
Mounting Plate

144765342
CEPK3328000003F103: RNCC: 2 | RNVC: 2

20 Jun 1995

5340-14-330-0399
Loop Clamp

143300399
70277310: RNCC: 3 | RNVC: 2
70277310: RNCC: 5 | RNVC: 9
277310: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-457-9864
Mounting Plate

144579864
537010: RNCC: 3 | RNVC: 2

2 Oct 1992

5340-14-539-0532
Lock Bolt

145390532
NGM0060000042159: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-439-3655
Pipe Hanger

144393655
DA2C707111410: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-486-5116
Retaining Strap

144865116
10068069: RNCC: 3 | RNVC: 2

21 Mar 1997

5340-14-549-4362
Retaining Band

145494362
0098900430: RNCC: 3 | RNVC: 2

4 Apr 2006

5340-14-382-5624
Angle Bracket

143825624
20070522: RNCC: 3 | RNVC: 2
20070522: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-513-8865
Loop Clamp

145138865
CC290: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-484-3470
Access Cover

144843470
6514155: RNCC: 3 | RNVC: 2
1123453C00: RNCC: 5 | RNVC: 2
6514155: RNCC: 5 | RNVC: 2

14 Nov 1996

5340-14-366-0451
Angle Bracket

143660451
19299141: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-520-6991
Access Cover

145206991
89478424: RNCC: 3 | RNVC: 2

31 May 2000

5340-14-521-2055
Lever Bracket

145212055
TS142364: RNCC: 3 | RNVC: 2

12 Jul 2000

5340-14-375-1827
Loop Clamp

143751827
16047338: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-381-3179
Access Cover

143813179
2206-481C519: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-325-2682
Rod End Clevis

143252682
274936: RNCC: 3 | RNVC: 2
274936: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-503-0775
Access Cover

145030775
46247388: RNCC: 3 | RNVC: 2
46247388: RNCC: 5 | RNVC: 9

7 Jan 1998

5340-14-382-3288
Access Cover

143823288
4327010000: RNCC: 3 | RNVC: 2
4327010000: RNCC: 5 | RNVC: 2
102222101: RNCC: 5 | RNVC: 2
102222101: RNCC: 5 | RNVC: 2

17 Feb 1983

5340-14-357-8953
Leaf Spring

143578953
0000272928: RNCC: 3 | RNVC: 2
0000272928: RNCC: 5 | RNVC: 9
272928: RNCC: 5 | RNVC: 9

20 Jul 1979

5340-14-366-3893
Access Cover

143663893
F2032950: RNCC: 3 | RNVC: 2
F2032950: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-231-9404
Access Cover

142319404
A59972: RNCC: 3 | RNVC: 2
A59972: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-427-3256
Access Cover

144273256
600E064: RNCC: 3 | RNVC: 2
600E064: RNCC: 5 | RNVC: 2

13 Oct 1988

5340-14-451-1895
Mounting Bracket

144511895
521614: RNCC: 3 | RNVC: 2

6 Nov 1991

5340-14-446-1274
Mounting Bracket

144461274
536822: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-561-1148
Utility Access Door

145611148
8007430N50: RNCC: 3 | RNVC: 2

16 Jun 2009

5340-14-528-4893
Mounting Plate

145284893
712721: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-546-0487
Mounting Bracket

145460487
10711667000: RNCC: 3 | RNVC: 2

8 Jun 2005

5340-14-502-5557
Access Cover

145025557
5000821668: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-528-5596
Angle Bracket

145285596
376025: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-458-8852
Mounting Bracket

144588852
M35080: RNCC: 3 | RNVC: 2

5 Nov 1992

5340-14-342-4959
Mending Plate

143424959
4770010790: RNCC: 3 | RNVC: 2

16 May 1977

5340-14-041-5190
Loop Clamp

140415190
51313102008: RNCC: 3 | RNVC: 2
21G8: RNCC: 5 | RNVC: 2
Z00.N7141381208: RNCC: 5 | RNVC: 2
HB21G8: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-516-2200
Metal Grille

145162200
0020477: RNCC: 3 | RNVC: 2

15 Sep 1999

5340-14-042-2192
Bow Handle

140422192
16039647: RNCC: 3 | RNVC: 2
16039647: RNCC: 5 | RNVC: 2
16039647: RNCC: 5 | RNVC: 9

14 Feb 1977

5340-14-482-5015
Synchro Clamp

144825015
PM1A711220152: RNCC: 3 | RNVC: 2
PM1A711220152: RNCC: 5 | RNVC: 2

11 Jul 1996

5340-14-502-5936
Retaining Clip

145025936
5003079045: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-367-4289
Rod End Clevis

143674289
15450378: RNCC: 3 | RNVC: 2
15450378: RNCC: 5 | RNVC: 2
15450378: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-502-0372
Access Cover

145020372
K2067422: RNCC: 3 | RNVC: 2
060715300: RNCC: 5 | RNVC: 2

26 Nov 1997

5340-14-321-4470
Access Cover

143214470
401MA0375REP10: RNCC: 3 | RNVC: 2
401MA0386REP10: RNCC: 5 | RNVC: 2
401MA375REP10: RNCC: 5 | RNVC: 2
401MA386REP10: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-399-4738
Access Cover

143994738
29001761: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-554-8231
Stand Base

145548231
7509145D01: RNCC: 3 | RNVC: 2

29 Aug 2007

5340-14-433-4869
Access Cover

144334869
019551A: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-485-9758
Mounting Bracket

144859758
576443: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-298-3072
Retaining Strap

142983072
26425350: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-555-2875
Access Cover

145552875
56955596AA: RNCC: 3 | RNVC: 2

22 Oct 2007

5340-14-031-4079
Bow Handle

140314079
564941: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-472-0183
Mounting Bracket

144720183
LYN013050013021: RNCC: 3 | RNVC: 2

30 Sep 1994

5340-14-553-5013
Strapping

145535013
FEUILLARD CUIVRE ETAME 30*2MM: RNCC: 3 | RNVC: 2

10 Apr 2007

5340-14-348-5825
Runner

143485825
N745050341: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-14-450-5884
Mounting Plate

144505884
6940518: RNCC: 3 | RNVC: 2

14 Oct 1991

5340-14-526-5691
Access Cover

145265691
DE2B293644: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-328-0422
Rod End Clevis

143280422
6432SM9: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-533-6635
Mounting Bracket

145336635
F1264373: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-14-374-6151
Angle Bracket

143746151
5000536059: RNCC: 3 | RNVC: 2
5000536059: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-432-3907
Mounting Bracket

144323907
541613: RNCC: 3 | RNVC: 2
00541613: RNCC: 5 | RNVC: 2

7 Jun 1989

5340-14-296-2063
Angle Bracket

142962063
121E63-203-41-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-536-9737
Utility Access Door

145369737
231045-013: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-400-0889
Casement Fastener

144000889
214602: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-549-8611
Mounting Bracket

145498611
2092417-001: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-310-3005
Retaining Strap

143103005
3097-06-15-010: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-418-9105
Retaining Strap

144189105
BAM1-820: RNCC: 3 | RNVC: 2

16 Sep 1987

5340-14-517-6945
Block Clamp

145176945
FC1C710-50: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-417-1608
Angle Bracket

144171608
366A21-1243-3102: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-14-329-2350
Retaining Strap

143292350
55214-025-000ACL: RNCC: 3 | RNVC: 2
240-040-6431-25: RNCC: 5 | RNVC: 2
55214-25ACL: RNCC: 5 | RNVC: 2
55214-25ACL: RNCC: 5 | RNVC: 2
85-800-4492: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-291-2401
Angle Bracket

142912401
6232-0613: RNCC: 3 | RNVC: 2
6232-0613: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-382-0568
Angle Bracket

143820568
3160S73-80-327: RNCC: 3 | RNVC: 2
85-692-1924: RNCC: 6 | RNVC: 9

25 Jan 1983

5340-14-375-9914
Anchor Strap

143759914
32174-369-000: RNCC: 3 | RNVC: 2
32174-369-000: RNCC: 5 | RNVC: 2

30 Mar 1982

5340-14-305-7028
Butt Hinge

143057028
MS7524-6-1830: RNCC: 3 | RNVC: 2
MS7524-6-1830: RNCC: 5 | RNVC: 2
MS7524-6: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-460-6982
Mounting Bracket

144606982
7804-78: RNCC: 3 | RNVC: 2
9253661080: RNCC: 5 | RNVC: 2

4 Feb 1993

5340-14-387-3235
Rim Lock Set

143873235
DLK10R: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-14-477-9417
Clamping Catch

144779417
GE.1003-IB: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-14-364-2752
Swivel Caster

143642752
26200SNM: RNCC: 3 | RNVC: 2
85-689-5277: RNCC: 6 | RNVC: 9

7 Aug 1980

5340-14-224-9387
Angle Bracket

142249387
700514: RNCC: 3 | RNVC: 9
062064437: RNCC: 5 | RNVC: 9
64437: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-545-7371
Access Cover

145457371
192E661-00: RNCC: 3 | RNVC: 2

4 May 2005

5340-14-413-9975
Rod End Connector

144139975
13-211-15: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-466-7954
Mounting Plate

144667954
915-1-68-415: RNCC: 3 | RNVC: 2

26 Nov 1993

5340-14-444-6157
Pad Eye

144446157
54807-132-1: RNCC: 3 | RNVC: 9

16 Jan 1991

5340-14-465-4811
Cane Bolt

144654811
365A21-3184-03: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-523-5018
Bumper

145235018
09.139.00: RNCC: 3 | RNVC: 2
09-139-00: RNCC: 5 | RNVC: 2

24 Jan 2001

5340-14-360-7005
Anchor Strap

143607005
650-41615-01: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-302-7940
Screw Hook

1 Jan 1973

5340-14-211-0632
Rod End Connector

142110632
14277: RNCC: 3 | RNVC: 2
14277: RNCC: 6 | RNVC: 9

1 Jan 1964

5340-14-407-5259
Quick Release Pin

144075259
22089033: RNCC: 3 | RNVC: 2
22392818: RNCC: 5 | RNVC: 2
22089033: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-14-473-2456
Thumb Latch

144732456
17266J: RNCC: 3 | RNVC: 2

9 Dec 1994

5340-14-546-8672
Blank Panel

145468672
28081822-8: RNCC: 3 | RNVC: 2

30 Aug 2005

5340-14-482-1014
Flush Catch Claw

144821014
22531655: RNCC: 3 | RNVC: 2
22531655: RNCC: 5 | RNVC: 9

20 Jun 1996

5340-14-410-1700
Retaining Band

144101700
BANDEACIERGALVANISEDE18MMEP0-5: RNCC: 3 | RNVC: 2

13 Jun 1986

5340-14-468-7615
Loop Clamp

144687615
CS002PM0543: RNCC: 3 | RNVC: 2
9610036580: RNCC: 5 | RNVC: 2

16 Mar 1994

5340-14-446-1258
Mounting Plate

144461258
70917: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-440-3661
Mounting Bracket

144403661
3511 271 80371: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-552-6205
Access Cover

145526205
GENE E 290012A: RNCC: 3 | RNVC: 2

18 Jan 2007

5340-14-246-1756
Bumper

142461756
4492: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-437-8365
Mounting Plate

144378365
3002157: RNCC: 3 | RNVC: 2

21 Feb 1990

5340-14-529-4941
Catch Strike

145294941
DA2C283400097: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-361-7012
Catch Strike

143617012
328-10: RNCC: 3 | RNVC: 2
G01520-82: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-14-283-3362
Catch Strike

142833362
F221-21-03: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-397-4477
Catch Strike

143974477
AC.148-BR: RNCC: 3 | RNVC: 2
AC148BR: RNCC: 5 | RNVC: 2

14 Dec 1984

5340-14-536-1436
Latch Bar

145361436
4518-2032: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-409-8961
Catch Strike

144098961
AC.113-EV: RNCC: 3 | RNVC: 2
AC113EV: RNCC: 5 | RNVC: 2

4 Jun 1986

5340-14-414-3976
Catch Strike

144143976
DA1D230320531: RNCC: 3 | RNVC: 2

28 Jan 1987

5340-14-536-2728
Catch Strike

145362728
350A25-1516-22: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-14-488-6753
Access Cover

144886753
38225556: RNCC: 3 | RNVC: 2
38225556: RNCC: 5 | RNVC: 9

28 May 1997

5340-14-240-6461
Access Cover

142406461
70663531: RNCC: 3 | RNVC: 2
70663531: RNCC: 5 | RNVC: 9
M260013: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-419-8169
Rod End Clevis

144198169
DA2C121317834U1: RNCC: 3 | RNVC: 2

5 Nov 1987

5340-14-422-5937
Mounting Bracket

144225937
547930: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-14-374-5818
Clamping Catch

143745818
860199: RNCC: 3 | RNVC: 2

30 Jan 1982

5340-14-321-6884
Access Cover

143216884
0235630030: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-488-4782
Metal Grille

144884782
39043705: RNCC: 3 | RNVC: 2
39043705: RNCC: 3 | RNVC: 9

14 May 1997

5340-14-332-4028
Synchro Clamp

143324028
3CGF536S18: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-526-0450
Mounting Bracket

145260450
10606363: RNCC: 3 | RNVC: 2

28 Jun 2001

5340-14-406-3336
Mounting Plate

144063336
79032282: RNCC: 3 | RNVC: 2
79032282: RNCC: 5 | RNVC: 9

8 Jan 1986

5340-14-408-5297
Bridge Clamp

144085297
3230303: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-554-1254
Loop Clamp

145541254
352 124: RNCC: 3 | RNVC: 2
352 124: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-361-7347
Bow Handle

143617347
18126705: RNCC: 3 | RNVC: 2
18126705: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-14-509-1217
Mounting Plate

145091217
NC0590110: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-401-1926
Access Cover

144011926
79109648: RNCC: 3 | RNVC: 2
79109648: RNCC: 5 | RNVC: 9

29 May 1985

5340-14-245-1541
Anchor Strap

142451541
70483301: RNCC: 3 | RNVC: 2
483301: RNCC: 5 | RNVC: 9
70483301: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-534-5825
Access Cover

145345825
NNM0010031872699: RNCC: 2 | RNVC: 2

26 Mar 2003

5340-14-520-6134
Track Stop

145206134
46054203: RNCC: 3 | RNVC: 2

24 May 2000

5340-14-396-4838
Locking Stay

143964838
065T13-727288G: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-505-7172
Loop Clamp

145057172
45709776: RNCC: 3 | RNVC: 2
8382530: RNCC: 5 | RNVC: 2

26 Mar 1998

5340-14-533-5425
Mounting Plate

145335425
F1260110: RNCC: 3 | RNVC: 2

10 Feb 2003

5340-14-383-3599
Anchor Strap

143833599
0428790511: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-551-8752
Rod End Connector

145518752
43043112: RNCC: 3 | RNVC: 2
43043112: RNCC: 3 | RNVC: 9

6 Nov 2006

5340-14-544-7291
Mounting Plate

145447291
61024475AA: RNCC: 3 | RNVC: 2

21 Feb 2005

5340-14-031-5620
Rod End Connector

140315620
AECV159001-0000: RNCC: 3 | RNVC: 2
85-800-6212: RNCC: 6 | RNVC: 9

14 Jun 1980

5340-14-452-6416
Access Cover

144526416
27106022-5: RNCC: 3 | RNVC: 2

15 Jan 1992

5340-14-511-2447
Rod End Connector

145112447
429525: RNCC: 3 | RNVC: 2
429525-001: RNCC: 5 | RNVC: 9

9 Dec 1998

5340-14-512-3925
Bumper

145123925
2164-01-01-03: RNCC: 3 | RNVC: 2

12 Feb 1999

5340-14-396-0495
Pad Eye

143960495
04-02-03: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-541-5382
Angle Bracket

145415382
1091981-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-437-2487
Runner

144372487
10-215-01-36: RNCC: 3 | RNVC: 2

24 Jan 1990

5340-14-464-1577
Bumper

144641577
634002926: RNCC: 3 | RNVC: 2
6340-02926: RNCC: 5 | RNVC: 2

15 Jul 1993

5340-14-249-0017
Plug Button

142490017
NT75-02AOUT54/0615: RNCC: 2 | RNVC: 2

1 Jan 1968

5340-14-342-1756
Angle Bracket

143421756
70868255: RNCC: 3 | RNVC: 2
70868255: RNCC: 5 | RNVC: 9
868255: RNCC: 5 | RNVC: 9
85-689-2266: RNCC: 6 | RNVC: 9

14 Apr 1977

5340-14-371-8451
Angle Bracket

143718451
NO PRIMARY REF14-371-8451: RNCC: 3 | RNVC: 2
RF72-6025: RNCC: 5 | RNVC: 2

5 Aug 1981

5340-14-418-6438
Mending Plate

144186438
414998-211-13-25-41: RNCC: 3 | RNVC: 9

8 Sep 1987

5340-14-348-2011
Loop Clamp

143482011
271315310: RNCC: 3 | RNVC: 2
PF7-3S10: RNCC: 5 | RNVC: 2
PF7-3S10: RNCC: 5 | RNVC: 9

29 Mar 1978

5340-14-433-0920
Catch Strike

144330920
AC144ZB: RNCC: 3 | RNVC: 2
0193304X00: RNCC: 5 | RNVC: 2

10 Jul 1989

5340-14-380-0917
Catch Strike

143800917
AC.126-ZB: RNCC: 3 | RNVC: 2
AC126ZB: RNCC: 5 | RNVC: 2

8 Nov 1982

5340-14-437-2039
Catch Strike

144372039
NO PRIMARY REF14-437-2039: RNCC: 3 | RNVC: 2
552653: RNCC: 5 | RNVC: 9

23 Jan 1990

5340-14-251-5353
Catch Strike

142515353
E4M221-21-03: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-279-2363
Catch Strike

142792363
42463: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-265-1779
Spring Window Bolt

142651779
NO PRIMARY REF14-265-1779: RNCC: 3 | RNVC: 2
1597BIS16X180: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-500-3720
Spring Window Bolt

145003720
D62101300002: RNCC: 3 | RNVC: 2
F300 0T 024 3820: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-542-1228
Catch Strike

145421228
5302835-045-04: RNCC: 3 | RNVC: 2

7 Jul 2004

5340-14-543-9901
Catch Strike

145439901
239,41,013: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-14-310-6270
Catch Strike

143106270
GP8-205: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-263-6613
Catch Strike

142636613
0176-227071: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-341-0573
Catch Strike

143410573
3101-17D: RNCC: 3 | RNVC: 2
0870020800: RNCC: 5 | RNVC: 2
0870020800: RNCC: 5 | RNVC: 9

16 Mar 1977

5340-14-337-3703
Catch Strike

143373703
EA1M221-18-04: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-438-6113
Catch Strike

144386113
TB1030904: RNCC: 3 | RNVC: 2

28 Mar 1990

5340-14-468-7401
Catch Strike

144687401
PM1A713173007: RNCC: 3 | RNVC: 2
PM1A713173007: RNCC: 5 | RNVC: 2

16 Mar 1994

5340-14-389-5371
Catch Strike

143895371
365A81-0196-20: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-254-4239
Catch Strike

142544239
AC.122-ZB: RNCC: 3 | RNVC: 2
122: RNCC: 5 | RNVC: 2
AC122ZB: RNCC: 5 | RNVC: 2
SAT173110: RNCC: 5 | RNVC: 2
173110: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-272-0834
Spring Window Bolt

142720834
7060A508: RNCC: 3 | RNVC: 2
7060A508: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-349-3623
Catch Strike

143493623
AC.148-ZB: RNCC: 3 | RNVC: 2
AC148ZB: RNCC: 5 | RNVC: 2

22 May 1978

5340-14-419-2363
Catch Strike

144192363
4CR601ABR: RNCC: 3 | RNVC: 2
70375: RNCC: 5 | RNVC: 2
ACR550HN: RNCC: 5 | RNVC: 2

16 Oct 1987

5340-14-519-2962
Catch Strike

145192962
332A23-0609-0201: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-371-1528
Spring Window Bolt

143711528
330A24-9801-2001: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-295-2151
Catch Strike

142952151
CR0CHET70-15: RNCC: 3 | RNVC: 2
4H002526-00: RNCC: 5 | RNVC: 2
4H002526-00: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-382-3564
Catch Strike

143823564
AC.103-IB: RNCC: 3 | RNVC: 2
AC103IB: RNCC: 3 | RNVC: 2
427730: RNCC: 5 | RNVC: 2

17 Feb 1983

5340-14-345-1562
Catch Strike

143451562
FD1B221-22970: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-394-1622
Barrel Bolt

143941622
TR1-40LAIT0N: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-321-8312
Catch Strike

143218312
A10-21-162-04-0: RNCC: 3 | RNVC: 2
A10-21-162-04-0: RNCC: 5 | RNVC: 2
85-800-3776: RNCC: 6 | RNVC: 9

1 Jan 1975

5340-14-258-8163
Catch Strike

142588163
17363-04B: RNCC: 3 | RNVC: 9
1303507: RNCC: 5 | RNVC: 9
1303507: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-416-0515
Catch Strike

144160515
BJM00852: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-455-9259
Spring Window Bolt

144559259
PM1A233190082: RNCC: 3 | RNVC: 2
PM1A233190082: RNCC: 5 | RNVC: 2
85-801-3048: RNCC: 6 | RNVC: 9

11 Jun 1992

5340-14-353-5977
Mounting Bracket

143535977
043371S: RNCC: 3 | RNVC: 2
D1512-564: RNCC: 3 | RNVC: 2
043371: RNCC: 5 | RNVC: 2

16 Jan 1979

5340-14-341-2004
Angle Bracket

143412004
M3E708-084: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-431-5879
Block Clamp

144315879
160G722043-05: RNCC: 3 | RNVC: 2

26 Apr 1989

5340-14-419-2448
Bumper

144192448
7804-62: RNCC: 3 | RNVC: 2

16 Oct 1987

5340-14-394-4000
Cover Strip

143944000
366A25-0027-24: RNCC: 3 | RNVC: 2
366A250027-24: RNCC: 5 | RNVC: 2

28 Aug 1984

5340-14-488-2410
Mounting Bracket

144882410
25614620: RNCC: 3 | RNVC: 2
2-561462-0: RNCC: 5 | RNVC: 2

23 Apr 1997

5340-14-389-3672
Mending Plate

143893672
341A65-7648-20: RNCC: 3 | RNVC: 2

19 Dec 1983

5340-14-430-9591
Quick Release Pin

144309591
625C12B50: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-14-517-4307
Cushioning Pad

145174307
27162349-4: RNCC: 3 | RNVC: 2
27162349-4: RNCC: 5 | RNVC: 2

13 Dec 1999

5340-14-525-6360
Loop Clamp

145256360
20 238 140 1080: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-325-6676
Loop Clamp

143256676
S1963: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-548-1860
Mounting Bracket

145481860
69013029: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-14-461-2579
Mounting Bracket

144612579
SHS1H0104A: RNCC: 3 | RNVC: 2

3 Mar 1993

5340-14-525-1412
Loop Clamp

145251412
1821: RNCC: 3 | RNVC: 2

22 May 2001

5340-14-399-4997
Angle Bracket

143994997
15169456: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-462-8932
Plug Button

144628932
1 6S: RNCC: 3 | RNVC: 2
GD160-1 6S: RNCC: 5 | RNVC: 2

5 May 1993

5340-14-541-0513
Lock-Release Lever

145410513
290843: RNCC: 3 | RNVC: 2

8 May 2004

5340-14-428-6292
Block Clamp

144286292
LB11211556016: RNCC: 3 | RNVC: 2
11211556016: RNCC: 5 | RNVC: 2

8 Dec 1988

5340-14-351-9752
Access Cover

143519752
BY148A10191: RNCC: 3 | RNVC: 2
BFC10191: RNCC: 5 | RNVC: 2

16 Oct 1978

5340-14-504-7498
Mounting Plate

145047498
5001824875: RNCC: 3 | RNVC: 2
57308732: RNCC: 3 | RNVC: 2

3 Mar 1998

5340-14-552-0428
Angle Bracket

145520428
0249720490: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-14-557-5351
Utility Resilient Mount

145575351
511161: RNCC: 3 | RNVC: 2
A210609900035: RNCC: 5 | RNVC: 2

18 Jun 2008

5340-14-535-0630
Mounting Bracket

145350630
02000047: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-14-515-4034
Access Cover

145154034
20130241A: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-249-8193
Retaining Strap

142498193
HE60J37: RNCC: 3 | RNVC: 2
HE60J37: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-394-6377
Mounting Plate

143946377
79098844: RNCC: 3 | RNVC: 2
79098844: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-398-7996
Mending Plate

143987996
0035615315: RNCC: 3 | RNVC: 2
0035615315: RNCC: 5 | RNVC: 9

20 Feb 1985

5340-14-469-6821
Retaining Strap

144696821
DA2C201930411A1: RNCC: 3 | RNVC: 2

4 May 1994

5340-14-466-2822
Mounting Bracket

144662822
10227985: RNCC: 3 | RNVC: 2

3 Nov 1993

5340-14-386-5515
Cover Strip

143865515
DA2C291453401A1: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-357-7305
Butt Hinge

143577305
CC404ZB: RNCC: 3 | RNVC: 2
0243176S00: RNCC: 5 | RNVC: 2

20 Jul 1979

5340-14-490-6459
Mounting Bracket

144906459
2049401L: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-328-1426
Runner

143281426
13801: RNCC: 3 | RNVC: 2
GSEU550CAMACNIM: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-499-1134
Lock Key

144991134
A09040415: RNCC: 3 | RNVC: 2
F00155940: RNCC: 3 | RNVC: 2
F00155940: RNCC: 5 | RNVC: 9
F300 0T 018 3197: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-547-5569
Support Hook

145475569
PM1A713561008: RNCC: 3 | RNVC: 2
PM1A713561008: RNCC: 5 | RNVC: 2

15 Oct 2005

5340-14-485-1241
Retaining Clip

144851241
1007055: RNCC: 3 | RNVC: 2

10 Jan 1997

5340-14-517-1184
Runner

145171184
8628.GA.080.NI.011: RNCC: 3 | RNVC: 2
6677923CREP52: RNCC: 5 | RNVC: 2

10 Nov 1999

5340-14-524-8148
Mounting Plate

145248148
1068220C00: RNCC: 3 | RNVC: 2

18 Apr 2001

5340-14-528-5926
Angle Bracket

145285926
935585: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-548-7757
Mounting Bracket

145487757
TB5040204: RNCC: 3 | RNVC: 2

9 Feb 2006

5340-14-464-3301
Mounting Bracket

144643301
5211301: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-443-3059
Surface Bolt

144433059
BLBF12V: RNCC: 3 | RNVC: 2

14 Nov 1990

5340-14-541-5439
Mounting Plate

145415439
2093370: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-494-6747
Mounting Plate

144946747
157030039: RNCC: 3 | RNVC: 2
F300 0T 017 7579: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-304-3043
Angle Bracket

143043043
121S71-270-52-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-377-8143
Butt Hinge

143778143
1-40X50DR0ITELAIT0N: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-031-9342
Loop Clamp Kit

140319342
1852-3-49: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-341-7463
Retaining Band

143417463
5171584100: RNCC: 3 | RNVC: 2
715841: RNCC: 5 | RNVC: 2

14 Apr 1977

5340-14-406-6761
Runner

144066761
26700B2150110E: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-514-0780
Pawl Fastener Set

145140780
PM1A005001N32: RNCC: 3 | RNVC: 2
PM1A005001N32: RNCC: 5 | RNVC: 2
MJCP: RNCC: 5 | RNVC: 9

22 Apr 1999

5340-14-333-5263
Butt Hinge

143335263
730: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-519-4781
Pipe Hanger

145194781
624228: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-547-5458
Pipe Hanger

145475458
RA1M704916213: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-369-2691
Flush Catch Claw

143692691
366A25-1017-01: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-312-2800
Rod End Clevis

143122800
502-550-529-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-374-6585
Rod End Clevis

143746585
M421-300102: RNCC: 3 | RNVC: 2

30 Jan 1982

5340-14-550-4874
Pipe Hanger

145504874
78731-035-100: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-307-5967
Angle Bracket

143075967
E4P702-18-829: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-217-8709
Mounting Bracket

142178709
3160S88-02-310: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-404-8687
Mending Plate

144048687
ST159-2M756P133: RNCC: 3 | RNVC: 2
ST159-2M756P133A: RNCC: 5 | RNVC: 2

20 Nov 1985

5340-14-465-0403
Dashpot

144650403
REMDCHEGZLE-SERT-020028-: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-501-2976
Mounting Plate

145012976
708-002-002: RNCC: 3 | RNVC: 2
708.002.002: RNCC: 3 | RNVC: 2
F300 0T 025 3385: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-504-6151
Clamping Catch

145046151
6081/D2364: RNCC: 3 | RNVC: 9
6081: RNCC: 5 | RNVC: 2

25 Feb 1998

5340-14-398-6429
Webbing Strap

143986429
E96-6M: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-364-4965
Lock-Release Lever

143644965
NO PRIMARY REF14-364-4965: RNCC: 3 | RNVC: 2
2512: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-345-2269
Loop Clamp

143452269
FB1A702-112: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-428-4792
Loop Clamp

144284792
75109-80: RNCC: 3 | RNVC: 2
CDM2-80: RNCC: 5 | RNVC: 2

8 Dec 1988

5340-14-315-1633
Tubular Fairlead

143151633
160-88902-14: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-401-7398
Surface Bolt

144017398
987-400: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-453-8954
Bumper

144538954
E021-300-000A: RNCC: 3 | RNVC: 2

12 Mar 1992

5340-14-410-3175
Pipe Hanger

144103175
332A75-1601-20: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-14-010-0167
Cover Strip

140100167
3130S28-02-090: RNCC: 3 | RNVC: 2

1 Jan 1961

5340-14-314-3885
Webbing Strap

143143885
998-00-004: RNCC: 3 | RNVC: 2
3511 131 20461: RNCC: 5 | RNVC: 2
3511-131-20461: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-493-6801
Rod End Clevis

144936801
6-90-1-22/08: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-377-0828
Cover Strip

143770828
330A76-3216-23: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-476-0336
Mounting Plate

144760336
205301007: RNCC: 3 | RNVC: 2
PAA53-01-007: RNCC: 5 | RNVC: 2

17 May 1995

5340-14-450-3348
Block Clamp

144503348
FA1R702-65: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-286-4625
Mortise Lock Set

142864625
341A25-1098-00: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-475-5933
Mounting Bracket

144755933
TB1030101F021: RNCC: 3 | RNVC: 2
TB1030101-00SP021: RNCC: 5 | RNVC: 2
08-60-0046: RNCC: 5 | RNVC: 9

19 Apr 1995

5340-14-314-6221
Loop Clamp

143146221
48-634-05-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-524-2164
Mounting Plate

145242164
PL3-1/2-70: RNCC: 3 | RNVC: 9

7 Mar 2001

5340-14-377-4290
Loop Clamp

143774290
EA1M701-55-10: RNCC: 3 | RNVC: 2
85-692-0505: RNCC: 6 | RNVC: 9

17 May 1982

5340-14-444-8876
Mounting Plate

144448876
41301407084: RNCC: 3 | RNVC: 2
413-01407-084: RNCC: 5 | RNVC: 2
41301407084: RNCC: 5 | RNVC: 2

28 Jan 1991

5340-14-339-4421
Retaining Strap

143394421
620-847-003-0: RNCC: 3 | RNVC: 2
620-847-003-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5340-14-369-9377
Anchor Strap

143699377
2-988-300: RNCC: 3 | RNVC: 2
2-988-300: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-525-4246
Bumper

145254246
332A22-1384-03: RNCC: 3 | RNVC: 2

30 May 2001

5340-14-513-2031
Loop Clamp

145132031
ASNA0021-21FE24: RNCC: 1 | RNVC: 2
210692400: RNCC: 3 | RNVC: 2
ASNA0021-21FE24: RNCC: 3 | RNVC: 2
ASNA0021-21FE24: RNCC: 5 | RNVC: 2

10 Mar 1999

5340-14-529-4171
Mounting Bracket

145294171
EA1M703-26-980: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-439-2451
Access Cover

144392451
332A55-0125-32: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-382-2794
Loop Clamp

143822794
EN4114S18NH0: RNCC: 2 | RNVC: 2
51115305018: RNCC: 3 | RNVC: 2
A0021-25S18: RNCC: 5 | RNVC: 2
25S18: RNCC: 5 | RNVC: 2
A0021-25S18: RNCC: 5 | RNVC: 2

17 Feb 1983

5340-14-484-4830
Loop Clamp

144844830
5712.52: RNCC: 3 | RNVC: 2
5712-52: RNCC: 5 | RNVC: 2

21 Nov 1996

5340-14-532-4484
Angle Bracket

145324484
341A54-1531-20: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-389-5356
Butt Hinge

143895356
365A81-0173-01: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-264-1733
Loop Clamp

142641733
55218-216D507ADL: RNCC: 3 | RNVC: 2
55218-216-001ADL: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-532-0676
Mounting Bracket

145320676
03-725-312: RNCC: 3 | RNVC: 2
SZ03.725.312: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-455-6441
Mounting Plate

144556441
MAT214-0246F4: RNCC: 3 | RNVC: 2

3 Jun 1992

5340-14-310-2339
Rod End Clevis

143102339
721-0208: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-536-4501
Webbing Strap

145364501
ARO9015-14: RNCC: 3 | RNVC: 2

22 Aug 2003

5340-14-471-3579
Swivel Caster

144713579
EP4BD150-39R: RNCC: 3 | RNVC: 2

24 Aug 1994

5340-14-465-4856
Plug Button

144654856
365A25-0011-33: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-467-4497
Turnbuckle Body

144674497
312-03111-001: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-14-278-2075
Mending Plate

142782075
NO PRIMARY REF14-278-2075: RNCC: 3 | RNVC: 2
11539: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-429-8635
Surface Bolt

144298635
2143282: RNCC: 3 | RNVC: 2
21-43282: RNCC: 5 | RNVC: 2
F300 0T 025 0087: RNCC: 6 | RNVC: 9

15 Feb 1989

5340-14-465-1509
Mounting Plate

144651509
365A25-3183-20: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-526-3862
Lock Bolt

145263862
9926P7: RNCC: 3 | RNVC: 2
9926-P7: RNCC: 5 | RNVC: 2

26 Jul 2001

5340-14-524-6343
Mounting Bracket

145246343
365A87-3136-00: RNCC: 3 | RNVC: 2

29 Mar 2001

5340-14-364-5385
Webbing Strap

143645385
52278-14: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-14-464-1424
Mounting Bracket

144641424
634002927: RNCC: 3 | RNVC: 2
6340-02927: RNCC: 5 | RNVC: 2

15 Jul 1993

5340-14-403-1762
Rod End Clevis

144031762
ST159-2M761P197: RNCC: 3 | RNVC: 2

25 Jul 1985

5340-14-542-1241
Mounting Plate

145421241
5302835-46-01B: RNCC: 3 | RNVC: 2

7 Jul 2004

5340-14-306-2685
Access Cover

143062685
NO PRIMARY REF14-306-2685: RNCC: 3 | RNVC: 2
105319: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-537-6238
Mounting Plate

145376238
815-2-36-293: RNCC: 3 | RNVC: 2

12 Nov 2003

5340-14-232-4470
Mending Plate

142324470
23001199: RNCC: 3 | RNVC: 2
23001199-4: RNCC: 5 | RNVC: 2
7-598: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-437-9503
Mounting Bracket

144379503
330A58-6182-07: RNCC: 3 | RNVC: 2

28 Feb 1990

5340-14-233-3489
Loop Clamp

142333489
3130S45-10-036: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-437-3610
Loop Clamp

144373610
201497-04725: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-400-4598
Webbing Strap

144004598
B60L4M: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-400-0422
Angle Bracket

144000422
578128T: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-518-4618
Mounting Bracket

145184618
T711A1001325: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-386-0556
Runner

143860556
494668: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-543-3205
Mounting Bracket

145433205
9105300G001: RNCC: 3 | RNVC: 2

20 Oct 2004

5340-14-284-6598
Angle Bracket

142846598
9132745: RNCC: 3 | RNVC: 2
9132745: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-549-9562
Angle Bracket

145499562
0288861250: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-359-6933
Loop Clamp

143596933
17256-367-690: RNCC: 3 | RNVC: 2
17256-367-690: RNCC: 5 | RNVC: 2

15 Oct 1979

5340-14-561-5493
Utility Resilient Mount

145615493
42048112: RNCC: 3 | RNVC: 2

28 Jul 2009

5340-14-405-8284
Loop Clamp

144058284
0027-2022: RNCC: 3 | RNVC: 2

4 Dec 1985

5340-14-545-2515
Pipe Hanger

145452515
S215A3014208: RNCC: 3 | RNVC: 2

29 Mar 2005

5340-14-347-4473
Angle Bracket

143474473
0264767490: RNCC: 3 | RNVC: 2

1 Mar 1978

5340-14-270-1901
Retaining Strap

142701901
0176-711236: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-524-4822
Eye Hook

145244822
396A824: RNCC: 3 | RNVC: 2
39 60000 824: RNCC: 5 | RNVC: 9

21 Mar 2001

5340-14-409-6462
Cover Strip

144096462
DA1D203366410: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-505-4850
Butt Hinge

145054850
42-1-3770: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-397-7072
Rod End Clevis

143977072
4169-03: RNCC: 3 | RNVC: 2
4-014913: RNCC: 5 | RNVC: 2
4169-0300: RNCC: 5 | RNVC: 2

14 Dec 1984

5340-14-349-8809
Bail Handle

143498809
2-69-107-00: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-508-0023
Bow Handle

145080023
1078-10: RNCC: 3 | RNVC: 9
8921600040: RNCC: 5 | RNVC: 9
042020: RNCC: 5 | RNVC: 9
1078-10 TOURNANT 1/4D-G: RNCC: 5 | RNVC: 9

26 Aug 1998

5340-14-407-2922
Loop Clamp

144072922
PE27019RI10: RNCC: 3 | RNVC: 2
85-800-9902: RNCC: 6 | RNVC: 9

12 Feb 1986

5340-14-312-6826
Rod End Clevis

143126826
262-12-52186-02: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-461-2518
Mounting Plate

144612518
BC101A010-108: RNCC: 3 | RNVC: 9
0780726W00: RNCC: 5 | RNVC: 2

3 Mar 1993

5340-14-340-3373
Access Cover

143403373
M3C704-86-02: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-475-0784
Mounting Plate

144750784
DM3-3641000: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-445-4941
Mounting Bracket

144454941
ST406M11P55-12: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-437-9508
Mounting Bracket

144379508
330A63-1134-20: RNCC: 3 | RNVC: 2

28 Feb 1990

5340-14-548-1588
Mounting Bracket

145481588
B131-200-000A: RNCC: 3 | RNVC: 2

13 Dec 2005

5340-14-542-9937
Access Cover

145429937
5924-CF-50-1-0-0100-2/3-8: RNCC: 3 | RNVC: 9

18 Aug 2004

5340-14-317-8125
Rod End Clevis

143178125
A1-64737: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-463-8823
Mounting Bracket

144638823
365A61-6541-42: RNCC: 3 | RNVC: 2
85-694-9907: RNCC: 6 | RNVC: 9

30 Jun 1993

5340-14-354-4583
Access Cover

143544583
EA1M101-18: RNCC: 3 | RNVC: 2

21 Nov 1996

5340-14-393-7787
Loop Clamp

143937787
NO PRIMARY REF14-393-7787: RNCC: 3 | RNVC: 2
FA006PREST047003: RNCC: 5 | RNVC: 9

23 Jun 1984

5340-14-241-1152
Lock Bolt

142411152
321A58-0414-04: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-400-4170
Access Cover

144004170
3-331-1: RNCC: 3 | RNVC: 2
85-692-8675: RNCC: 6 | RNVC: 9

24 Apr 1985

5340-14-448-7559
Buckle

144487559
09727: RNCC: 3 | RNVC: 2
3 11 09727 EC: RNCC: 5 | RNVC: 2
0024-42-407-2056: RNCC: 6 | RNVC: 9

10 Jul 1991

5340-14-378-5266
Angle Bracket

143785266
303-217-001-0: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-501-9432
Access Cover

145019432
332A62-2316-02: RNCC: 3 | RNVC: 2

19 Nov 1997

5340-14-304-7920
Access Cover

143047920
4700711500: RNCC: 3 | RNVC: 2
7007-150: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-533-6063
Mounting Bracket

145336063
708010S942-10A: RNCC: 3 | RNVC: 2

12 Feb 2003

5340-14-220-4832
Mending Plate

142204832
NO PRIMARY REF14-220-4832: RNCC: 3 | RNVC: 2
M11036-9: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-230-6595
Access Cover

142306595
29-9-055899-0: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-429-3609
Rod End Connector

144293609
100SP1-0056: RNCC: 3 | RNVC: 2

18 Jan 1989

5340-14-489-8777
Angle Bracket

144898777
BB2418: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-14-370-7674
Loop Clamp

143707674
A26081020: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-535-1945
Loop Clamp

145351945
7705005132: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-524-3593
Mounting Plate

145243593
SD001PD070402: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-396-2255
Mounting Plate

143962255
216896: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-534-8977
Mounting Bracket

145348977
47174065: RNCC: 3 | RNVC: 2

16 Apr 2003

5340-14-530-1238
Mounting Plate

145301238
TB3050731: RNCC: 3 | RNVC: 2

14 May 2002

5340-14-453-4345
Angle Bracket

144534345
551905: RNCC: 3 | RNVC: 2

19 Feb 1992

5340-14-261-9415
Retaining Strap

142619415
15913270: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-444-6511
Butt Hinge

144446511
91PD110204: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-14-250-3620
Loop Clamp

142503620
ST406M52P557: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-540-1662
Mounting Bracket

145401662
F1264642: RNCC: 3 | RNVC: 2

11 Mar 2004

5340-14-523-9720
Retaining Clip

145239720
8030346T00: RNCC: 3 | RNVC: 2

14 Feb 2001

5340-14-466-3144
Retaining Strap

144663144
39457427: RNCC: 3 | RNVC: 2
39457427: RNCC: 3 | RNVC: 9

3 Nov 1993

5340-14-519-2595
Bumper

145192595
155446: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-421-7832
Expansion Shield

144217832
TOP7L212: RNCC: 3 | RNVC: 2
ROUGE25: RNCC: 3 | RNVC: 9
T0P7L212: RNCC: 5 | RNVC: 2

27 Jan 1988

5340-14-539-3555
Blank Panel

145393555
AL100011: RNCC: 3 | RNVC: 2

7 Jan 2004

5340-14-524-2443
Mounting Plate

145242443
PD01099: RNCC: 3 | RNVC: 2
PD01099: RNCC: 5 | RNVC: 9

7 Mar 2001

5340-14-524-3514
Bumper

145243514
SD001PD010707: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-450-4432
Metal Grille

144504432
3104658: RNCC: 3 | RNVC: 2
1108862D00: RNCC: 5 | RNVC: 2
3104658: RNCC: 5 | RNVC: 2

9 Oct 1991

5340-14-420-1107
Loop Clamp

144201107
47D: RNCC: 3 | RNVC: 9

18 Nov 1987

5340-14-533-6570
Angle Bracket

145336570
F1260164: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-14-511-4123
Detent Plunger

145114123
NO PRIMARY REF14-511-4123: RNCC: 3 | RNVC: 2
188-020: RNCC: 5 | RNVC: 2
EN10-1-35B: RNCC: 5 | RNVC: 9
5340AA1132215: RNCC: 6 | RNVC: 9

16 Dec 1998

5340-14-427-0336
Retaining Strap

144270336
2-8500-2398: RNCC: 3 | RNVC: 2
85-693-6485: RNCC: 6 | RNVC: 9

5 Oct 1988

5340-14-463-7940
Access Cover

144637940
21384339-00: RNCC: 3 | RNVC: 2
21385339-0: RNCC: 5 | RNVC: 2

30 Jun 1993

5340-14-305-4393
Loop Clamp

143054393
502-706-062-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-286-1399
Rod End Connector

142861399
A10-90-146-45-0: RNCC: 3 | RNVC: 2
A10-90-146-45-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-217-9170
Mounting Bracket

142179170
3160S25-28-276: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-287-2536
Rod End Connector

142872536
341A27-1213-00: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-376-5817
Quick Release Pin

143765817
NO PRIMARY REF14-376-5817: RNCC: 3 | RNVC: 2
404291401: RNCC: 5 | RNVC: 9
404291401: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-234-9980
Loop Clamp

142349980
15260M22: RNCC: 3 | RNVC: 2
675-422-230-0: RNCC: 5 | RNVC: 2
15260M22: RNCC: 5 | RNVC: 9
675-422-230-0: RNCC: 8 | RNVC: 2

1 Jan 1967

5340-14-204-1188
Loop Clamp

142041188
3130S73-65-004: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-308-5346
Bridge Clamp

143085346
321C0-0187REP8: RNCC: 3 | RNVC: 2
321C0-187REP8: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-524-5464
Detent Plunger

145245464
365A25-3036-22: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-316-2078
Retaining Strap

143162078
F700-043: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-415-8962
Butt Hinge

144158962
T20-13H2509: RNCC: 3 | RNVC: 2

26 May 1987

5340-14-493-6896
Anchor Strap

144936896
TB30-58098-124: RNCC: 3 | RNVC: 2
1560AA2075812: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-371-8463
Butt Hinge

143718463
NO PRIMARY REF14-371-8463: RNCC: 3 | RNVC: 2
RF72-7002: RNCC: 5 | RNVC: 2

5 Aug 1981

5340-14-522-9605
Access Cover

145229605
ST159-2M661-1P451: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-14-490-2843
Mounting Bracket

144902843
J05085-04-0200P006: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-432-3557
Mounting Bracket

144323557
160G722029-03: RNCC: 3 | RNVC: 2

7 Jun 1989

5340-14-465-7717
Loop Clamp

144657717
302000115: RNCC: 3 | RNVC: 2
Z00.N7141230015: RNCC: 5 | RNVC: 2
CLIC55-115: RNCC: 5 | RNVC: 2
55-115: RNCC: 5 | RNVC: 9

14 Oct 1993

5340-14-416-4136
Pipe Hanger

144164136
ST08-00-28F3-8DN100: RNCC: 3 | RNVC: 2
ST08-00-28F3-8DN100: RNCC: 5 | RNVC: 9
2155575: RNCC: 5 | RNVC: 9

10 Jun 1987

5340-14-032-0712
Angle Bracket

140320712
341A23-1033-20: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-324-0652
Rod End Clevis

143240652
T268-1M664P14A: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-435-7629
Access Cover

144357629
21350204-00: RNCC: 3 | RNVC: 2

22 Nov 1989

5340-14-465-5103
Mounting Bracket

144655103
366A25-0041-36: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-482-9416
Pipe Hanger

144829416
78733-050-034B: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-487-5579
Mounting Plate

144875579
78786-050B15F: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-285-2065
Threaded Rod End

142852065
A10-82-300-24-0: RNCC: 3 | RNVC: 2
A10-82-300-24-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-418-4831
Leaf Spring

144184831
L80G244LD440EP8: RNCC: 3 | RNVC: 2
1105-169: RNCC: 5 | RNVC: 2
L80G244-13: RNCC: 5 | RNVC: 2
R80G244LD440EP8: RNCC: 5 | RNVC: 2

26 Aug 1987

5340-14-373-1771
Webbing Strap

143731771
136-124: RNCC: 3 | RNVC: 2

21 Oct 1981

5340-14-436-5224
Bumper

144365224
CAP230-30-58-20: RNCC: 3 | RNVC: 9
CAP20L-30-58-20A: RNCC: 5 | RNVC: 9
CAP230-30-58-20A: RNCC: 5 | RNVC: 9
CAP230-30-58-20A: RNCC: 5 | RNVC: 9
CAP21-30-58-20A: RNCC: 5 | RNVC: 9

3 Jan 1990

5340-14-309-9893
Friction Catch

143099893
78924-271: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-432-9308
Rod End Connector

144329308
5000040299: RNCC: 3 | RNVC: 2
85-692-9908: RNCC: 6 | RNVC: 9

4 Jul 1989

5340-14-396-2885
Access Cover

143962885
NO PRIMARY REF14-396-2885: RNCC: 3 | RNVC: 2
23727: RNCC: 5 | RNVC: 9
D40-23727: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-247-3267
Rod End Clevis

142473267
321A57-0225-20: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-544-3351
Mounting Bracket

145443351
10713203000: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-14-531-4192
Mounting Bracket

145314192
250367: RNCC: 3 | RNVC: 2

20 Aug 2002

5340-14-271-6832
Door Handle

142716832
A57674: RNCC: 3 | RNVC: 2
A57674: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-370-7248
Access Cover

143707248
187249: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-304-0087
Rod End Clevis

143040087
A0120BB2BREP7: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-448-0406
Quick Release Pin

144480406
51453C8R45NF: RNCC: 3 | RNVC: 2
51453C8R45NF: RNCC: 5 | RNVC: 2
51453C8R45NF: RNCC: 5 | RNVC: 9

12 Jun 1991

5340-14-413-9981
Anchor Strap

144139981
13-211-46: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-476-6620
Mounting Plate

144766620
F1251472: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-14-454-5774
Rod End Clevis

144545774
8958010202: RNCC: 3 | RNVC: 9

7 Apr 1992

5340-14-441-3382
Angle Bracket

144413382
78701A: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-488-5360
Access Cover

144885360
12.78.13: RNCC: 3 | RNVC: 2

16 May 1997

5340-14-553-1460
Access Cover

145531460
0249920290: RNCC: 3 | RNVC: 2

6 Mar 2007

5340-14-477-1273
Retaining Strap

144771273
5010054730: RNCC: 3 | RNVC: 2

26 Jul 1995

5340-14-540-2941
Access Cover

145402941
46248863: RNCC: 3 | RNVC: 2

18 Mar 2004

5340-14-502-5406
Access Cover

145025406
5000813776: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-031-8633
Rod End Clevis

140318633
1641880008: RNCC: 3 | RNVC: 2
16418800: RNCC: 5 | RNVC: 2

5 Jul 1980

5340-14-547-6384
Webbing Strap

145476384
2IS1036M17A: RNCC: 3 | RNVC: 2

20 Oct 2005

5340-14-434-0349
Rod End Clevis

144340349
536237: RNCC: 3 | RNVC: 2

29 Aug 1989

5340-14-326-9346
Rod End Connector

143269346
189994: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-439-3656
Pipe Hanger

144393656
DA2C707111411: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-484-7436
Mounting Plate

144847436
2342587J00: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-459-1573
Mounting Plate

144591573
16787465: RNCC: 3 | RNVC: 2

19 Nov 1992

5340-14-310-6837
Angle Bracket

143106837
NO PRIMARY REF14-310-6837: RNCC: 3 | RNVC: 2
11076-4: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-530-6083
Mounting Bracket

145306083
888-360-425-0: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-14-437-4452
Bow Handle

144374452
332A25-1129-02: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-372-6638
Flush Lock

143726638
NO PRIMARY REF14-372-6638: RNCC: 3 | RNVC: 2
EPL1: RNCC: 5 | RNVC: 9

21 Sep 1981

5340-14-269-6650
Loop Clamp

142696650
15260M4: RNCC: 3 | RNVC: 2
675-404-120-0: RNCC: 5 | RNVC: 2
15260M4: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-530-6048
Detent Plunger

145306048
888-354-609-0: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-14-389-5549
Cane Bolt

143895549
365A95-0045-12: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-305-4387
Loop Clamp

143054387
502-551-113-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-442-8588
Clamping Catch

144428588
TL100AXE12L50: RNCC: 3 | RNVC: 2
332A58-4553-24: RNCC: 3 | RNVC: 2
F300 0T 010 9377: RNCC: 6 | RNVC: 9

7 Nov 1990

5340-14-522-9597
Mounting Bracket

145229597
ST159-2M571P12: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-14-217-8986
Loop Clamp

142178986
3160S52-10-050: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-385-5944
Angle Bracket

143855944
CRP23-16-12: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-533-2130
Mounting Bracket

145332130
EA1M701-40-823: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-507-6367
Rod End Clevis

145076367
4A-512-21-02: RNCC: 3 | RNVC: 2

30 Jul 1998

Load More Results