What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 34 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 34 of 446

5340-14-529-9600
Loop Clamp

145299600
510203.200: RNCC: 3 | RNVC: 2
1124303W00: RNCC: 5 | RNVC: 2

24 Apr 2002

5340-14-401-3112
Retaining Band

144013112
223060: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-466-1714
Mounting Bracket

144661714
161414: RNCC: 3 | RNVC: 2
89169796: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-466-1490
Cushioning Pad

144661490
00122045: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-14-450-4981
Retaining Strap

144504981
BLC236932: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-14-540-5565
Bail Handle

145405565
GA024680Y00: RNCC: 3 | RNVC: 2

3 Apr 2004

5340-14-573-8337
Utility Resilient Mount

145738337
TP560566: RNCC: 3 | RNVC: 2

13 Nov 2012

5340-14-540-4811
Mounting Bracket

145404811
8045737W00: RNCC: 3 | RNVC: 2

1 Apr 2004

5340-14-383-1886
Angle Bracket

143831886
MY205151214G01: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-404-3890
Angle Bracket

144043890
22382820: RNCC: 3 | RNVC: 2
22382820: RNCC: 5 | RNVC: 9

30 Oct 1985

5340-14-524-2000
Access Cover

145242000
ST159-2M331P61: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-437-4366
Extension Handle

144374366
16929360: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-410-9228
Retaining Strap

144109228
BFC20223: RNCC: 3 | RNVC: 2

23 Jul 1986

5340-14-489-2173
Mounting Bracket

144892173
39456056: RNCC: 3 | RNVC: 2
39456056: RNCC: 3 | RNVC: 9
5865AA2064912: RNCC: 6 | RNVC: 9

2 Jul 1997

5340-14-533-5388
Mounting Bracket

145335388
192E356-00: RNCC: 3 | RNVC: 2

10 Feb 2003

5340-14-393-3617
Bumper

143933617
DHE5-010001: RNCC: 3 | RNVC: 2
85-692-3913: RNCC: 6 | RNVC: 9

7 Apr 1984

5340-14-301-4469
Butt Hinge

143014469
P26-306-160X60GS0UDEEAC: RNCC: 2 | RNVC: 2

1 Jan 1973

5340-14-472-9101
Butt Hinge

144729101
332V87-8000-23: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-310-2522
Loop Clamp

143102522
GSM1708C0LLIERTUBE26X20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-494-9521
Retaining Strap

144949521
5450022: RNCC: 3 | RNVC: 2
F300 0T 018 1086: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-415-3092
Pipe Hanger

144153092
ST08-00-28F4-8DN50: RNCC: 3 | RNVC: 2
33060: RNCC: 5 | RNVC: 9
ST08-00-28F4-8DN50: RNCC: 5 | RNVC: 9

29 Apr 1987

5340-14-351-9370
Bumper

143519370
17613-286-000: RNCC: 3 | RNVC: 2
17613-286-000: RNCC: 5 | RNVC: 2

16 Oct 1978

5340-14-361-0262
Rigid Caster

143610262
TF3BA100-23L: RNCC: 3 | RNVC: 2
TR3-100-33L: RNCC: 5 | RNVC: 2

19 Dec 1979

5340-14-465-1414
Lock Bolt

144651414
365A21-3190-07: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-490-3117
Mounting Plate

144903117
J05085-04-0600P011: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-434-8311
Angle Bracket

144348311
332A58-0033-57: RNCC: 3 | RNVC: 2

4 Oct 1989

5340-14-550-9232
Angle Bracket

145509232
RA1B701816261: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-514-4698
Shelf Bracket

145144698
IF-192-2523: RNCC: 3 | RNVC: 2

26 May 1999

5340-14-516-8491
Bridge Clamp

145168491
101160601701: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-14-554-2359
Loop Clamp

145542359
358 011: RNCC: 3 | RNVC: 2
358 011: RNCC: 3 | RNVC: 2

14 Jun 2007

5340-14-505-4532
Mending Plate

145054532
12224024: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-307-0411
Angle Bracket

143070411
177029: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-529-5447
Blank Panel

145295447
330A87-2341-20: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-548-6909
Shelf Bracket

145486909
K5812277K: RNCC: 3 | RNVC: 2

1 Feb 2006

5340-14-407-6483
Mounting Plate

144076483
MN6515A15-23: RNCC: 3 | RNVC: 9

27 Feb 1986

5340-14-553-1587
Mounting Bracket

145531587
252676916-00: RNCC: 3 | RNVC: 2

7 Mar 2007

5340-14-552-4192
Lever Bracket

145524192
V107286E: RNCC: 3 | RNVC: 2

21 Dec 2006

5340-14-349-1760
Angle Bracket

143491760
330A27-4117-01: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-14-309-8858
Loop Clamp

143098858
7455: RNCC: 3 | RNVC: 2
99-700-2339: RNCC: 6 | RNVC: 9

1 Jan 1974

5340-14-540-3850
Mounting Bracket

145403850
350A65-6520-7501: RNCC: 3 | RNVC: 2

20 Mar 2004

5340-14-526-8286
Mounting Plate

145268286
5010465118: RNCC: 3 | RNVC: 2

7 Sep 2001

5340-14-254-7770
Retaining Strap

142547770
52077: RNCC: 3 | RNVC: 9

1 Jan 1969

5340-14-372-6247
Retaining Strap

143726247
0000776166: RNCC: 3 | RNVC: 2
0000776166: RNCC: 5 | RNVC: 9

21 Sep 1981

5340-14-383-5162
Loop Clamp

143835162
20189308: RNCC: 3 | RNVC: 2
20189308: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-545-4678
Block Clamp

145454678
A11A704103040: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-536-4174
Mounting Bracket

145364174
T711A1002123: RNCC: 3 | RNVC: 2

5 Aug 2003

5340-14-440-1755
Angle Bracket

144401755
508100: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-354-2935
Retaining Band

143542935
531035: RNCC: 3 | RNVC: 2
00531035: RNCC: 5 | RNVC: 2

30 Jan 1979

5340-14-538-0071
Angle Bracket

145380071
3BM05651AAAA: RNCC: 3 | RNVC: 2

9 Dec 2003

5340-14-480-2204
Mounting Bracket

144802204
18551T001205: RNCC: 3 | RNVC: 2

28 Feb 1996

5340-14-313-5673
Retaining Strap

143135673
0235101260: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-541-8340
Angle Bracket

145418340
88179-1305: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-484-2690
Loop Clamp

144842690
3180S73-13-352-01: RNCC: 3 | RNVC: 2
3180731335201: RNCC: 5 | RNVC: 2

31 Oct 1996

5340-14-464-9550
Cover Strip

144649550
365A25-0034-22: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-382-1915
Mending Plate

143821915
M397-02-10-35-13: RNCC: 3 | RNVC: 2
453-10435-000: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-332-1180
Access Cover

143321180
413-10263-000: RNCC: 3 | RNVC: 2
413-10263-000: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-407-8884
Loop Clamp

144078884
SPV325PA-DPAS: RNCC: 3 | RNVC: 2

5 Mar 1986

5340-14-519-5050
Mounting Bracket

145195050
195-31001-091: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-529-5628
Mounting Bracket

145295628
330A69-5136-00: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-368-5035
Angle Bracket

143685035
F10A705200014: RNCC: 3 | RNVC: 2
85-689-9147: RNCC: 6 | RNVC: 9

20 Feb 1981

5340-14-331-1034
Runner

143311034
24C5202: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-551-3357
Pipe Hanger

145513357
RA1M701716191: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-485-1414
Angle Bracket

144851414
3BM00708AAAA: RNCC: 3 | RNVC: 2
3BM00708AAAA: RNCC: 5 | RNVC: 9

10 Jan 1997

5340-14-500-9425
Access Cover

145009425
D68505000007: RNCC: 3 | RNVC: 2
F300 0T 024 9637: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-548-7842
Clamping Catch

145487842
GE.44-IB: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-14-478-1694
Mounting Plate

144781694
418694: RNCC: 3 | RNVC: 2
418694-002: RNCC: 5 | RNVC: 9

11 Oct 1995

5340-14-533-3485
Utility Access Door

145333485
12-425-061D: RNCC: 3 | RNVC: 2
SZ12.425.061D: RNCC: 3 | RNVC: 2

31 Jan 2003

5340-14-343-4791
Utility Access Door

143434791
EA1M601-50-860: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-508-7713
Mounting Plate

145087713
BS2318.13.00.014: RNCC: 3 | RNVC: 2
BS2318-13-00-014: RNCC: 5 | RNVC: 9

30 Sep 1998

5340-14-396-3150
Retaining Strap

143963150
5700-44: RNCC: 3 | RNVC: 2
604041074600: RNCC: 5 | RNVC: 2

27 Nov 1984

5340-14-476-1589
Mounting Plate

144761589
207317001: RNCC: 3 | RNVC: 2
PAA73-17-001: RNCC: 5 | RNVC: 2

24 May 1995

5340-14-383-2756
Angle Bracket

143832756
SK2-20444: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-350-2249
Retaining Strap

143502249
SV3-01-07-13: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-472-7361
Lock Bolt

144727361
350A25-1350-18: RNCC: 3 | RNVC: 2

9 Nov 1994

5340-14-298-8303
Expansion Plug

142988303
NO PRIMARY REF14-298-8303: RNCC: 3 | RNVC: 2
80112: RNCC: 5 | RNVC: 9
00-054-1410: RNCC: 6 | RNVC: 9

1 Jan 1973

5340-14-433-3044
Mounting Bracket

144333044
853-202-282-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-14-401-7353
Expansion Shield

144017353
66592-7HSLM12-25: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-476-0914
Mounting Plate

144760914
222-3018-103: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-401-5627
Corner Brace

144015627
355A52-3008-21: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-340-3166
Angle Bracket

143403166
M3C704-172: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-400-9047
Rod End Clevis

144009047
EHA13-102: RNCC: 3 | RNVC: 2

21 May 1985

5340-14-251-4680
Control Rod

142514680
RA5402: RNCC: 3 | RNVC: 2
RT21244-1: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-475-5070
Mounting Bracket

144755070
TB1030101F027: RNCC: 3 | RNVC: 2
TB1030101-00SPF027: RNCC: 5 | RNVC: 2
08-60-0052: RNCC: 5 | RNVC: 9

12 Apr 1995

5340-14-389-5351
Mounting Bracket

143895351
365A81-0169-23: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-489-6845
Mounting Bracket

144896845
365A84-3117-01: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-278-5190
Door Handle

142785190
40125-4: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-554-2875
Door Closer

145542875
BG 11633: RNCC: 3 | RNVC: 1

19 Jun 2007

5340-14-398-0473
Cushioning Pad

143980473
0000784117: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-434-0688
Access Cover

144340688
534916: RNCC: 3 | RNVC: 2

4 Sep 1989

5340-14-520-3448
Access Cover

145203448
40147453: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-508-0958
Mounting Plate

145080958
F00140670: RNCC: 3 | RNVC: 2
F00140670: RNCC: 5 | RNVC: 9

26 Aug 1998

5340-14-403-4344
Bumper

144034344
1806704M1: RNCC: 3 | RNVC: 2
1806704M1: RNCC: 5 | RNVC: 9

21 Aug 1985

5340-14-396-4425
Loop Clamp

143964425
01180011013: RNCC: 3 | RNVC: 2
118011-13: RNCC: 5 | RNVC: 2
3597470003138: RNCC: 5 | RNVC: 2
CV18: RNCC: 5 | RNVC: 2
1593 18: RNCC: 5 | RNVC: 2

27 Nov 1984

5340-14-314-5422
Case Corner

143145422
8842: RNCC: 3 | RNVC: 2
8842: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-353-2156
Webbing Strap

143532156
356002030005: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-502-7514
Anchor Strap

145027514
546565: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-439-8803
Rod End Clevis

144398803
7M303C15M: RNCC: 3 | RNVC: 2

30 May 1990

5340-14-278-4566
Angle Bracket

142784566
12508021: RNCC: 3 | RNVC: 2
12508021: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-526-4236
Bumper

145264236
RA1B296139115: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-417-4085
Clamping Catch

144174085
969357P03: RNCC: 3 | RNVC: 2
969357P03: RNCC: 5 | RNVC: 9

8 Jul 1987

5340-14-502-7532
Anchor Strap

145027532
546589: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-417-0901
Access Cover

144170901
TRS01P057558: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-14-031-8828
Retaining Strap

140318828
573902007: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-412-5259
Butt Hinge

144125259
641305: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-14-487-4914
Access Cover

144874914
10294403: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-516-2541
Access Cover

145162541
MC2518F00: RNCC: 3 | RNVC: 2

15 Sep 1999

5340-14-533-8598
Bumper

145338598
00-700-812: RNCC: 3 | RNVC: 2
SZ00.700.812: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-525-5598
Mounting Bracket

145255598
F1263816: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-470-1875
Bumper

144701875
E1RP2315S77: RNCC: 3 | RNVC: 2
E1RP2315S77: RNCC: 5 | RNVC: 2

8 Jun 1994

5340-14-428-6306
Block Clamp

144286306
LB11211556064: RNCC: 3 | RNVC: 2
11211556064: RNCC: 5 | RNVC: 2

8 Dec 1988

5340-14-545-6863
Mounting Bracket

145456863
RA1A703750141N1: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-397-9752
Retaining Strap

143979752
401063: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-449-8772
Locking Stay

144498772
BA.810.NI: RNCC: 3 | RNVC: 2
91631337: RNCC: 5 | RNVC: 2
BA 810 NI: RNCC: 5 | RNVC: 2

11 Sep 1991

5340-14-461-0877
Loop Clamp

144610877
LN400010F10REPC2: RNCC: 3 | RNVC: 2
RAB0584: RNCC: 5 | RNVC: 2

24 Feb 1993

5340-14-378-9096
Loop Clamp

143789096
5000080308: RNCC: 3 | RNVC: 2
5000080308: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-14-392-3225
Access Cover

143923225
279664: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-482-8905
Angle Bracket

144828905
187A076: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-306-2243
Mending Plate

143062243
950281: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-544-9863
Filler Opening Cap

145449863
H300821: RNCC: 3 | RNVC: 2

10 Mar 2005

5340-14-296-8918
Buckle

142968918
000674007P: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-443-1336
Mounting Bracket

144431336
DA2C201200017: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-14-293-7876
Cushioning Pad

142937876
DC42793FIND.A: RNCC: 3 | RNVC: 2
ATS32KB: RNCC: 3 | RNVC: 2
DC42793F: RNCC: 5 | RNVC: 2
DOC328: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-357-8698
Mending Plate

143578698
0000142932: RNCC: 3 | RNVC: 2
0000142932: RNCC: 5 | RNVC: 9
142932: RNCC: 5 | RNVC: 9

20 Jul 1979

5340-14-454-7952
Mounting Bracket

144547952
38015033: RNCC: 3 | RNVC: 2
ARA051: RNCC: 5 | RNVC: 2
38015033: RNCC: 5 | RNVC: 9

17 Apr 1992

5340-14-540-9806
Mounting Bracket

145409806
6501CCD110: RNCC: 3 | RNVC: 2
6501CCD110000: RNCC: 5 | RNVC: 2

5 May 2004

5340-14-532-3806
Angle Bracket

145323806
RA1M706116111N1: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-296-2917
Angle Bracket

142962917
0257857820: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-423-3356
Loop Clamp

144233356
160G792011: RNCC: 3 | RNVC: 2

14 Apr 1988

5340-14-407-9800
Rod End Clevis

144079800
M4W4333907420: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-338-9880
Butt Hinge

143389880
488337: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-457-7343
Mounting Bracket

144577343
0378-38296: RNCC: 3 | RNVC: 2

17 Sep 1992

5340-14-297-4575
Mortise Lock Set

142974575
SERRUREVERTIAM0RTAISERPH57: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-466-7425
Mortise Lock

144667425
95605604: RNCC: 3 | RNVC: 2

24 Nov 1993

5340-14-534-8838
Eye Hook

145348838
1672129826: RNCC: 3 | RNVC: 2
CAE01525: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-14-404-6539
Retaining Strap

144046539
611733: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-403-4441
Angle Bracket

144034441
8110210: RNCC: 3 | RNVC: 2
313166: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-307-9091
Rim Lock

143079091
1084-2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-263-4135
Retaining Strap

142634135
R403227: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-289-0010
Access Cover

142890010
983A145: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-371-1386
Angle Bracket

143711386
A11A221147005A1: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-434-6017
Bumper

144346017
514130/60: RNCC: 3 | RNVC: 2

26 Sep 1989

5340-14-530-8486
Access Cover

145308486
4678691A: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-14-373-6581
Retaining Strap

143736581
BAZ98431: RNCC: 3 | RNVC: 2

13 Nov 1981

5340-14-369-8368
Clamping Catch

143698368
16130568: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-382-3916
Angle Bracket

143823916
BAZ97158: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-468-9901
Mounting Bracket

144689901
20322607: RNCC: 3 | RNVC: 2
20322607: RNCC: 5 | RNVC: 9

30 Mar 1994

5340-14-549-6606
Mounting Bracket

145496606
2716248630: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-14-516-8360
Mounting Plate

145168360
PLA-Q94791X00: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-14-508-1369
Mounting Bracket

145081369
00131780: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-338-9085
Bumper

143389085
T91109010003: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-413-7020
Angle Bracket

144137020
412702140005: RNCC: 3 | RNVC: 2

15 Jan 1987

5340-14-468-9776
Retaining Strap

144689776
702127: RNCC: 3 | RNVC: 2

30 Mar 1994

5340-14-549-1827
Mounting Bracket

145491827
61025881AA: RNCC: 3 | RNVC: 2

7 Mar 2006

5340-14-447-1853
Plug Button

144471853
NGS1A2419: RNCC: 3 | RNVC: 2

3 May 1991

5340-14-439-8439
Mounting Plate

144398439
29687724: RNCC: 3 | RNVC: 2

23 May 1990

5340-14-441-8732
Plug Button

144418732
9844094115: RNCC: 3 | RNVC: 2

24 Sep 1990

5340-14-501-6326
Metal Grille

145016326
1060901: RNCC: 3 | RNVC: 2

5 Nov 1997

5340-14-480-0109
Detent Plunger

144800109
1976069: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-465-5841
Angle Bracket

144655841
EA23261-PLM109: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-464-3300
Mounting Bracket

144643300
5211000: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-465-8602
Anchor Strap

144658602
5000749606: RNCC: 3 | RNVC: 2

14 Oct 1993

5340-14-504-6275
Lock Key

145046275
A09040103: RNCC: 3 | RNVC: 2
A09040103: RNCC: 5 | RNVC: 9

25 Feb 1998

5340-14-435-5510
Cover Strip

144355510
DA1D230327003A1: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-466-8832
Plug Button

144668832
003L179: RNCC: 3 | RNVC: 2
003L179: RNCC: 5 | RNVC: 2

7 Dec 1993

5340-14-473-8600
Mounting Bracket

144738600
332A87-0243-01: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-377-9372
Control Rod

143779372
710020-20061: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-505-2629
Mounting Plate

145052629
3-062-2-10213-01: RNCC: 3 | RNVC: 2

17 Mar 1998

5340-14-457-7316
Mounting Bracket

144577316
0372-28-23000: RNCC: 3 | RNVC: 2

17 Sep 1992

5340-14-369-2609
Access Cover

143692609
366A21-0058-05: RNCC: 3 | RNVC: 2

14 Mar 1996

5340-14-402-0413
Access Cover

144020413
219040: RNCC: 3 | RNVC: 2
20-0586: RNCC: 5 | RNVC: 2

26 Jun 1985

5340-14-336-8784
Loop Clamp

143368784
501-311-711-0: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-413-1665
Rod End Clevis

144131665
412701100202: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-357-0391
Bumper

143570391
344901: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-483-9347
Anchor Strap

144839347
189870: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-14-369-2834
Synchro Clamp

143692834
S2735-1DG: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-246-1659
Bail Handle

142461659
P0F310BZB: RNCC: 3 | RNVC: 2
6G01-480: RNCC: 5 | RNVC: 2
6G01-480: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-472-1786
Mounting Plate

144721786
702-056-0: RNCC: 3 | RNVC: 2

12 Oct 1994

5340-14-482-4215
Pipe Hanger

144824215
78733-050-027: RNCC: 3 | RNVC: 2

11 Jul 1996

5340-14-548-0512
Mortise Latch

145480512
26466-26/51083: RNCC: 3 | RNVC: 2

7 Dec 2005

5340-14-517-7057
Access Cover

145177057
222-3021-765: RNCC: 3 | RNVC: 2
222 3021 765: RNCC: 5 | RNVC: 2

5 Jan 2000

5340-14-310-3007
Retaining Strap

143103007
3097-06-15-011: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-269-4055
Mortise Lock Set

142694055
NO PRIMARY REF14-269-4055: RNCC: 3 | RNVC: 2
SERRUREDEP0RTEREM0RQUEF0URNIL: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-542-1294
Retaining Band

145421294
5302835-31: RNCC: 3 | RNVC: 2

7 Jul 2004

5340-14-327-8506
Quick Release Pin

143278506
7-090-14-1255: RNCC: 3 | RNVC: 2
51277-2-165: RNCC: 5 | RNVC: 9
85-800-4293: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-212-7596
Angle Bracket

142127596
5804-3-017: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-225-8630
Sliding Door Track

142258630
3160S29-17-230: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-463-7294
Blank Panel

144637294
1400-76-03: RNCC: 3 | RNVC: 2
714619: RNCC: 5 | RNVC: 2
89296293: RNCC: 5 | RNVC: 2

23 Jun 1993

5340-14-368-9782
Rim Lock

143689782
NO PRIMARY REF14-368-9782: RNCC: 3 | RNVC: 2
EL11APAVECCLEEL13131: RNCC: 5 | RNVC: 9

17 Apr 1981

5340-14-522-9607
Rod End Clevis

145229607
ST159-2M661-1P453: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-14-372-7311
Rod End Clevis

143727311
105-47-00-05: RNCC: 3 | RNVC: 2
105-47-00-05: RNCC: 5 | RNVC: 2

21 Sep 1981

5340-14-535-2737
Surface Bolt

145352737
853-800-009-0: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-388-8901
Butt Hinge

143888901
365A24-1176-04: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-325-0731
Loop Clamp

143250731
F702-105: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-365-3202
Loop Clamp

143653202
650-403-004-0: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-351-4468
Angle Bracket

143514468
73-063-247: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-474-7452
Angle Bracket

144747452
018406L01TRA: RNCC: 3 | RNVC: 2
018406L: RNCC: 5 | RNVC: 2

1 Mar 1995

5340-14-376-9838
Threaded Rod End

143769838
170909: RNCC: 3 | RNVC: 9

28 Apr 1982

5340-14-433-6363
Mounting Bracket

144336363
0411-60211: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-413-3331
Mounting Plate

144133331
NO PRIMARY REF14-413-3331: RNCC: 3 | RNVC: 2
3-05039-0: RNCC: 5 | RNVC: 9

26 Nov 1986

5340-14-465-2754
Mounting Bracket

144652754
365A21-5118-20: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-501-1598
Mounting Plate

145011598
014-018-096: RNCC: 3 | RNVC: 2
014.018.096: RNCC: 3 | RNVC: 2
F300 0T 025 2000: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-454-2064
Access Cover

144542064
21318770: RNCC: 3 | RNVC: 2
21318770-9: RNCC: 5 | RNVC: 2

26 Mar 1992

5340-14-465-2762
Angle Bracket

144652762
365A61-3001-2502: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-319-7105
Mending Plate

143197105
A10-94-951-02-0: RNCC: 3 | RNVC: 2
A10-94-951-02-0: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-481-1648
Threaded Rod End

144811648
312-18515-001: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-14-328-7135
Mending Plate

143287135
PAA15-26-003: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-541-4817
Mounting Bracket

145414817
88179-2116: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-398-9935
Bridge Clamp

143989935
670-270003: RNCC: 3 | RNVC: 2
679270003: RNCC: 5 | RNVC: 2
679270003: RNCC: 5 | RNVC: 2
679270003: RNCC: 5 | RNVC: 9
PUR670-270003: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-390-2364
Mending Plate

143902364
NO PRIMARY REF14-390-2364: RNCC: 3 | RNVC: 2
D10-23800: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-14-388-3438
Rod End Clevis

143883438
330A87-2377-20: RNCC: 3 | RNVC: 2

3 Nov 1983

5340-14-353-0923
Bow Handle

143530923
P4T015883-00: RNCC: 3 | RNVC: 2
4T015883-00: RNCC: 5 | RNVC: 2
4T015883-00: RNCC: 5 | RNVC: 9
P4T015883-00: RNCC: 5 | RNVC: 9

8 Dec 1978

5340-14-250-3604
Retaining Strap

142503604
ST406M52P559: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-500-6384
Mounting Plate

145006384
E64009998130: RNCC: 3 | RNVC: 2
F300 0T 024 6570: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-552-1924
Bumper

145521924
61154600AA: RNCC: 3 | RNVC: 2

1 Dec 2006

5340-14-516-2173
Mounting Plate

145162173
0020372: RNCC: 3 | RNVC: 2

15 Sep 1999

5340-14-502-5227
Mounting Bracket

145025227
5000681392: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-462-6683
Mounting Bracket

144626683
71369: RNCC: 3 | RNVC: 2
65618: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-550-3377
Mounting Bracket

145503377
2716146770: RNCC: 3 | RNVC: 2

16 Jun 2006

5340-14-346-8198
Angle Bracket

143468198
327293: RNCC: 3 | RNVC: 2
20327293-6: RNCC: 5 | RNVC: 2

19 Jan 1978

5340-14-325-9114
Key Blank

143259114
25511B6X12XC38: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-296-7848
Mounting Bracket

142967848
PF218613: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-450-2144
Mounting Plate

144502144
5172228300: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-544-7255
Retaining Strap

145447255
61030149AA: RNCC: 3 | RNVC: 2

21 Feb 2005

5340-14-541-5886
Mounting Bracket

145415886
908170: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-505-1859
Loop Clamp

145051859
8008052L00: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-543-6634
Stand Base

145436634
146251013: RNCC: 3 | RNVC: 2

1 Dec 2004

5340-14-323-3561
Runner

143233561
466-9M7P54: RNCC: 3 | RNVC: 2
466-9M7P54: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-418-4836
Leaf Spring

144184836
L80G244LD880EP9: RNCC: 3 | RNVC: 2
R80G244LD880EP9: RNCC: 5 | RNVC: 2
1105-163: RNCC: 5 | RNVC: 2
L80G244-7: RNCC: 5 | RNVC: 2

26 Aug 1987

5340-14-480-0491
Detent Plunger

144800491
10270916: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-450-5055
Bumper

144505055
5000991544: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-14-543-9785
Rope Cleat

145439785
8900000223: RNCC: 3 | RNVC: 9

19 Dec 2004

5340-14-336-2355
Webbing Strap

143362355
502-517-809-0: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-424-8482
Loop Clamp

144248482
160G742234-29: RNCC: 3 | RNVC: 2

9 Jun 1988

5340-14-470-8273
Cover Strip

144708273
T700A5610006100: RNCC: 3 | RNVC: 2

6 Jul 1994

5340-14-450-6468
Retaining Strap

144506468
1023436B00: RNCC: 3 | RNVC: 2

16 Oct 1991

5340-14-478-7371
Loop Clamp

144787371
611107: RNCC: 3 | RNVC: 2

20 Nov 1995

5340-14-433-9049
Angle Bracket

144339049
RP988645: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-14-445-3866
Mounting Bracket

144453866
BLC238225: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-14-302-9058
Handle Grip

143029058
N4778DET7: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-472-5383
Angle Bracket

144725383
9301190015: RNCC: 3 | RNVC: 2

28 Oct 1994

5340-14-496-1234
Mounting Bracket

144961234
63350-3: RNCC: 3 | RNVC: 2
63350.3: RNCC: 5 | RNVC: 2
F300 0T 020 9301: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-423-8919
Retaining Strap

144238919
06290677: RNCC: 3 | RNVC: 2

5 May 1988

5340-14-553-8704
Angle Bracket

145538704
25165171-00: RNCC: 3 | RNVC: 2
25165171-2: RNCC: 5 | RNVC: 2

25 May 2007

5340-14-450-4992
Retaining Strap

144504992
BLC238848: RNCC: 3 | RNVC: 2
30-0967: RNCC: 5 | RNVC: 2

9 Oct 1991

5340-14-300-0489
Loop Clamp

143000489
HD1300-9: RNCC: 3 | RNVC: 2
00519-21: RNCC: 5 | RNVC: 1
L00519-21: RNCC: 5 | RNVC: 2
L51921: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-371-9957
Loop Clamp

143719957
16293319: RNCC: 3 | RNVC: 2
16293319: RNCC: 5 | RNVC: 9

1 Sep 1981

5340-14-552-1672
Support Hook

145521672
F1451364: RNCC: 3 | RNVC: 2

29 Nov 2006

5340-14-252-5461
Mending Plate

142525461
0901073A: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-367-4311
Runner

143674311
15452304: RNCC: 3 | RNVC: 2
15452304: RNCC: 5 | RNVC: 2
15452304: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-480-9500
Mounting Bracket

144809500
5010113329: RNCC: 3 | RNVC: 2

11 Apr 1996

5340-14-302-0274
Retaining Strap

143020274
A10-71-771-00-1: RNCC: 3 | RNVC: 2
A10-71-771-00-1: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-438-7721
Mounting Bracket

144387721
330A93-2027-11: RNCC: 3 | RNVC: 2

4 Apr 1990

5340-14-466-7915
Anchor Strap

144667915
915-2-66-21: RNCC: 3 | RNVC: 2

26 Nov 1993

5340-14-506-3122
Mounting Bracket

145063122
10349083: RNCC: 3 | RNVC: 2

22 Apr 1998

5340-14-472-9672
Angle Bracket

144729672
38222811: RNCC: 3 | RNVC: 2
38222811: RNCC: 5 | RNVC: 9

23 Nov 1994

5340-14-456-1051
Mounting Plate

144561051
6920184: RNCC: 3 | RNVC: 2

18 Jun 1992

5340-14-533-9954
Mounting Bracket

145339954
713079: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-306-6226
Retaining Strap

143066226
15131081: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-505-6641
Protection Bellows

145056641
4200599: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-514-5343
Loop Clamp

145145343
11293: RNCC: 3 | RNVC: 2

26 May 1999

5340-14-399-0237
Anchor Strap

143990237
NO PRIMARY REF14-399-0237: RNCC: 3 | RNVC: 2
D20-34471: RNCC: 5 | RNVC: 9
34471: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-510-1119
Access Cover

145101119
F294-57RS5: RNCC: 3 | RNVC: 2
1560AA8007671: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-349-2304
Bow Handle

143492304
226638REP1: RNCC: 3 | RNVC: 2
226638REP1: RNCC: 5 | RNVC: 9

22 May 1978

5340-14-345-5096
Retaining Strap

143455096
EA1M701-25-882: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-478-4950
Angle Bracket

144784950
FE232-000-05: RNCC: 3 | RNVC: 2

8 Nov 1995

5340-14-346-9272
Retaining Strap

143469272
C80-58000: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-14-469-3836
Angle Bracket

144693836
1563-98: RNCC: 3 | RNVC: 2
9150620880: RNCC: 5 | RNVC: 2
91506208: RNCC: 5 | RNVC: 9

20 Apr 1994

5340-14-379-9030
Locking Stay

143799030
2187-104: RNCC: 3 | RNVC: 2
2187-104: RNCC: 5 | RNVC: 2
2187-104-000: RNCC: 5 | RNVC: 9

20 Oct 1982

5340-14-375-3556
Webbing Strap

143753556
134240S: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-367-4709
Pipe Hanger

143674709
A11A231174190: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-272-4866
Angle Bracket

142724866
10XACIERNICK1MM: RNCC: 3 | RNVC: 9
0903015: RNCC: 5 | RNVC: 9
10X10NICKELE: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-538-7739
Handwheel

145387739
NGM0011040318979: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-354-2902
Bumper

143542902
531695: RNCC: 3 | RNVC: 2
00531695: RNCC: 5 | RNVC: 2

30 Jan 1979

5340-14-418-8194
Retaining Strap

144188194
DA1D612010835: RNCC: 3 | RNVC: 2

16 Sep 1987

5340-14-292-2235
Pipe Hanger

142922235
282091: RNCC: 3 | RNVC: 2
282091: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-439-9068
Mounting Bracket

144399068
006585080P: RNCC: 3 | RNVC: 2

5 Jun 1990

5340-14-399-6976
Loop Clamp

143996976
253912: RNCC: 3 | RNVC: 2
253912: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-511-1162
Runner

145111162
442797: RNCC: 3 | RNVC: 2
442797-001: RNCC: 5 | RNVC: 9

2 Dec 1998

5340-14-406-2130
Retaining Strap

144062130
1183370: RNCC: 3 | RNVC: 2
1183370: RNCC: 5 | RNVC: 2
22384653: RNCC: 5 | RNVC: 2

8 Jan 1986

5340-14-365-3283
Mending Plate

143653283
0283180140: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-357-4603
Angle Bracket

143574603
A11A234211402: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-422-4545
Bow Handle

144224545
193759: RNCC: 3 | RNVC: 2

3 Mar 1988

5340-14-470-4184
Mounting Bracket

144704184
0390727160: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-445-4028
Mounting Bracket

144454028
BLC234227: RNCC: 3 | RNVC: 2

13 Feb 1991

5340-14-544-8158
Access Cover

145448158
9520004: RNCC: 3 | RNVC: 2

25 Feb 2005

5340-14-502-3022
Mounting Plate

145023022
22533434: RNCC: 3 | RNVC: 2
22533434: RNCC: 5 | RNVC: 9

9 Dec 1997

5340-14-457-7370
Support Hook

144577370
0372-13-21006: RNCC: 3 | RNVC: 2

17 Sep 1992

5340-14-425-5947
Access Cover

144255947
573762: RNCC: 3 | RNVC: 2

12 Jul 1988

5340-14-416-7897
Rod End Clevis

144167897
1101615: RNCC: 3 | RNVC: 9

25 Jun 1987

5340-14-372-1239
Anchor Strap

143721239
0000776367: RNCC: 3 | RNVC: 2
0000776367: RNCC: 5 | RNVC: 9
776367: RNCC: 5 | RNVC: 9

1 Sep 1981

5340-14-555-4165
Loop Clamp

145554165
78651RH48CF: RNCC: 1 | RNVC: 2
78651RH48CF: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-14-202-2113
Threaded Rod End

142022113
STE11: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-041-7251
Angle Bracket

140417251
95C12920T2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-549-5547
Bumper

145495547
AMPC GENE E226050: RNCC: 3 | RNVC: 2

14 Apr 2006

5340-14-549-8344
Angle Bracket

145498344
2092774: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-449-2919
Retaining Clip

144492919
202083: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-353-5238
Retaining Strap

143535238
800299: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-536-6760
Mounting Bracket

145366760
47148561: RNCC: 3 | RNVC: 2

10 Sep 2003

5340-14-488-6821
Bail Handle

144886821
ACA0050: RNCC: 3 | RNVC: 2
F300 0T 023 6508: RNCC: 6 | RNVC: 9

28 May 1997

5340-14-343-1155
Mending Plate

143431155
ST406M63P143: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-535-3963
Blank Panel

145353963
5010354556: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-403-9834
Mending Plate

144039834
TS101224: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-352-1655
Mending Plate

143521655
051394: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-555-7294
Expansion Shield

145557294
0903 616 040: RNCC: 3 | RNVC: 2

11 Dec 2007

5340-14-481-4625
Rim Lock

144814625
92 54 91: RNCC: 3 | RNVC: 2

8 May 1996

5340-14-388-4669
Retaining Strap

143884669
52231010400: RNCC: 3 | RNVC: 2
522310104: RNCC: 5 | RNVC: 2

3 Nov 1983

5340-14-480-1980
Bumper

144801980
40032: RNCC: 3 | RNVC: 2
40032: RNCC: 5 | RNVC: 9

28 Feb 1996

5340-14-409-0274
Anchor Strap

144090274
3043284: RNCC: 3 | RNVC: 2
3043284: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-349-2366
Access Cover

143492366
80878: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-352-5777
Rod End Clevis

143525777
A11A263330105: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-486-4776
Access Cover

144864776
45430695: RNCC: 3 | RNVC: 2
45430695: RNCC: 3 | RNVC: 9

21 Mar 1997

5340-14-524-3479
Utility Access Door

145243479
SD001NM022101: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-551-3358
Pipe Hanger

145513358
RA1M701756171: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-511-8826
Runner

145118826
RL001PE010003: RNCC: 1 | RNVC: 2
RL001PE010003: RNCC: 3 | RNVC: 2
RL001PE010003: RNCC: 5 | RNVC: 9
RL001PE010003: RNCC: 5 | RNVC: 9

28 Jan 1999

5340-14-482-6806
Angle Bracket

144826806
47029651: RNCC: 3 | RNVC: 2

18 Jul 1996

5340-14-523-2850
Pipe Hanger

145232850
RA1M701636851N1: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-470-4068
Loop Clamp

144704068
0390757260: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-435-5561
Access Cover

144355561
BB5353: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-460-9045
Rod End Clevis

144609045
D9762B: RNCC: 3 | RNVC: 2

15 Feb 1993

5340-14-421-7063
Rod End Clevis

144217063
8812027302: RNCC: 3 | RNVC: 2

27 Jan 1988

5340-14-341-1761
Loop Clamp

143411761
M3E702-425: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-396-2486
Angle Bracket

143962486
4770315480: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-496-9164
Mounting Bracket

144969164
490127-32027-00: RNCC: 3 | RNVC: 2
F300 0T 022 2661: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-518-3667
Mounting Plate

145183667
10557348: RNCC: 3 | RNVC: 2

2 Feb 2000

5340-14-454-0058
Loop Clamp

144540058
650-791-086-0: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-555-4143
Loop Clamp

145554143
78651RH10CF: RNCC: 1 | RNVC: 2
78651RH10CF: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-14-394-2546
Mounting Plate

143942546
S8002LS025F9FTYPE5: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-550-1984
Access Cover

145501984
720588: RNCC: 3 | RNVC: 2

8 Jun 2006

5340-14-372-3008
Anchor Strap

143723008
VDPV3526: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-553-1220
Access Cover

145531220
LA8M00100H11200: RNCC: 3 | RNVC: 2

5 Mar 2007

5340-14-427-0259
Access Cover

144270259
16603413: RNCC: 3 | RNVC: 2

5 Oct 1988

5340-14-502-8140
Access Cover

145028140
8Y8683: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-445-9303
Rod End Clevis

144459303
DA2C171202002: RNCC: 3 | RNVC: 2

27 Feb 1991

5340-14-431-7594
Anchor Strap

144317594
39043288: RNCC: 3 | RNVC: 2
39043288: RNCC: 3 | RNVC: 9

10 May 1989

5340-14-439-1960
Access Cover

144391960
16008202: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-349-3025
Access Cover

143493025
128013: RNCC: 3 | RNVC: 2
281280130: RNCC: 5 | RNVC: 2

22 May 1978

5340-14-363-0643
Access Cover

143630643
705442138: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-14-356-0993
Retaining Strap

143560993
501-730-186-0: RNCC: 3 | RNVC: 2

5 Apr 1979

5340-14-473-6733
Mounting Plate

144736733
332A76-4648-20: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-345-2669
Loop Clamp

143452669
3-2-2606-02-16A: RNCC: 3 | RNVC: 2
3-2-2606-02-16: RNCC: 5 | RNVC: 2

5 Oct 1977

5340-14-473-8610
Mounting Bracket

144738610
332A87-0291-20: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-467-9169
Mounting Bracket

144679169
312-12140-001: RNCC: 3 | RNVC: 2

2 Feb 1994

5340-14-481-2893
Plug Button

144812893
5551-002-0: RNCC: 3 | RNVC: 9

25 Apr 1996

5340-14-370-0348
Webbing Strap

143700348
302848-0: RNCC: 3 | RNVC: 2
EL20-131-D: RNCC: 5 | RNVC: 2
EL20-131: RNCC: 5 | RNVC: 2
EL20-131: RNCC: 5 | RNVC: 9
EL20-131-D: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-514-9963
Mounting Plate

145149963
SA/CS11/7.5: RNCC: 3 | RNVC: 2

25 Jun 1999

5340-14-340-3575
Rod End Clevis

143403575
M3C771-12-01: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-454-0860
Mounting Plate

144540860
16394494: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-459-3682
Runner

144593682
S335-015: RNCC: 3 | RNVC: 2
S335-015: RNCC: 5 | RNVC: 9
5046397: RNCC: 5 | RNVC: 9

26 Nov 1992

5340-14-511-6231
Pipe Hanger

145116231
78731-069-100: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-460-6809
Access Cover

144606809
7460-231E1: RNCC: 3 | RNVC: 2

4 Feb 1993

5340-14-497-7430
Mounting Bracket

144977430
A02400-02-0000P010: RNCC: 3 | RNVC: 2

15 Oct 1997

5340-14-549-6015
Rod End Clevis

145496015
648-12: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-14-529-0524
Retaining Band

145290524
HD-250-1147: RNCC: 3 | RNVC: 2
8035993A00: RNCC: 5 | RNVC: 2
HD-250-1147: RNCC: 5 | RNVC: 9

6 Mar 2002

5340-14-351-5472
Loop Clamp

143515472
E9900-12: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-527-9640
Retaining Band

145279640
4E6-10061-001: RNCC: 3 | RNVC: 2
4E6-10061-000: RNCC: 5 | RNVC: 2
4E6-10061-000: RNCC: 5 | RNVC: 2

5 Dec 2001

5340-14-206-0014
Bow Handle

142060014
2228-53-53-20-75: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-392-6443
Webbing Strap

143926443
4-011-0030: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-377-3064
Loop Clamp

143773064
3-2633-03-50A: RNCC: 3 | RNVC: 2
3-2633-03-50A: RNCC: 5 | RNVC: 2

17 May 1982

5340-14-460-3702
Mounting Plate

144603702
365A84-1068-20: RNCC: 3 | RNVC: 2

21 Jan 1993

5340-14-355-8808
Loop Clamp

143558808
7087102104: RNCC: 3 | RNVC: 2
1727-12: RNCC: 5 | RNVC: 2

5 Apr 1979

5340-14-526-7514
Mounting Plate

145267514
121-861-10-14-12: RNCC: 3 | RNVC: 2

3 Sep 2001

5340-14-355-4944
Rod End Clevis

143554944
321A91-3171-20: RNCC: 3 | RNVC: 2
85-689-8431: RNCC: 6 | RNVC: 9

19 Mar 1979

5340-14-322-8297
Access Cover

143228297
A00840-03-4000P002: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-528-2642
Mounting Bracket

145282642
21240637-00: RNCC: 3 | RNVC: 2
21240637-9: RNCC: 5 | RNVC: 2

16 Jan 2002

5340-14-327-2356
Bumper

143272356
AACRANUPM8C1-01-1: RNCC: 3 | RNVC: 2
AACRANUPM8C1011: RNCC: 5 | RNVC: 2
85-800-3608: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-332-9050
Retaining Strap

143329050
55085: RNCC: 3 | RNVC: 9
10127-05-06: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-485-3464
Spring Holder

144853464
0074900240: RNCC: 3 | RNVC: 2

17 Jan 1997

5340-14-328-6774
Control Rod

143286774
NO PRIMARY REF14-328-6774: RNCC: 3 | RNVC: 2
C526: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-356-2899
Bail Handle

143562899
3511 180 48171: RNCC: 3 | RNVC: 2
3511-180-48171: RNCC: 5 | RNVC: 2

25 Apr 1979

5340-14-572-5190
Utility Resilient Mount

145725190
BFN45-230E15: RNCC: 3 | RNVC: 2
26306323: RNCC: 5 | RNVC: 2

10 Jul 2012

5340-14-541-5116
Angle Bracket

145415116
1091316-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-430-9345
Angle Bracket

144309345
G230010-12: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-14-305-2506
Strap Fastener Loop

143052506
17F0311: RNCC: 3 | RNVC: 2
FRF1-17F0311: RNCC: 5 | RNVC: 2
TID27357: RNCC: 5 | RNVC: 2
60-0229: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-431-1867
Access Cover

144311867
NO PRIMARY REF14-431-1867: RNCC: 3 | RNVC: 2
E967-796: RNCC: 5 | RNVC: 9

11 Apr 1989

5340-14-251-4781
Leaf Spring

142514781
E4M703-25-07: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-326-4972
Access Cover

143264972
36-020: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-516-2575
Loop Clamp

145162575
RSGU1-15/12-W1: RNCC: 3 | RNVC: 2

15 Sep 1999

5340-14-405-2904
Anchor Strap

144052904
NO PRIMARY REF14-405-2904: RNCC: 3 | RNVC: 2
D20-33199: RNCC: 5 | RNVC: 9

27 Nov 1985

5340-14-472-8984
Angle Bracket

144728984
332A85-0243-01: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-430-7603
Access Cover

144307603
F11RC3121-014: RNCC: 3 | RNVC: 2
F11RC3121-014: RNCC: 5 | RNVC: 9

22 Mar 1989

5340-14-505-5733
Snap Hook

145055733
NO PRIMARY REF14-505-5733: RNCC: 3 | RNVC: 2
A11062: RNCC: 5 | RNVC: 9

26 Mar 1998

5340-14-374-3851
Rod End Clevis

143743851
9506: RNCC: 3 | RNVC: 2
85-691-3337: RNCC: 6 | RNVC: 9

8 Dec 1981

5340-14-303-5161
Butt Hinge

143035161
3160S23-11-295: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-550-0783
Angle Bracket

145500783
169E664-00: RNCC: 3 | RNVC: 2

1 Jun 2006

5340-14-457-3678
Swivel Caster

144573678
135-8NEAB: RNCC: 3 | RNVC: 9
MPR135-8NEAB: RNCC: 5 | RNVC: 9
85-693-4066: RNCC: 6 | RNVC: 9

27 Aug 1992

5340-14-349-1362
Access Cover

143491362
300-652-202-0: RNCC: 3 | RNVC: 2
001028020A: RNCC: 5 | RNVC: 2
300-652-202P: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-534-6874
Mounting Plate

145346874
796-17: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-536-9883
Mounting Bracket

145369883
8084-01: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-336-8033
Rigid Caster

143368033
NO PRIMARY REF14-336-8033: RNCC: 3 | RNVC: 2
15522720: RNCC: 5 | RNVC: 9

7 Oct 1976

5340-14-545-7556
Mounting Plate

145457556
3-85-31-02-113-37: RNCC: 3 | RNVC: 2
3-85-31-02-113/37: RNCC: 5 | RNVC: 2
3-85-31-02-113/37/D: RNCC: 5 | RNVC: 2

10 May 2005

5340-14-496-8740
Mounting Plate

144968740
NO PRIMARY REF14-496-8740: RNCC: 3 | RNVC: 2
S6510-1N0IR: RNCC: 5 | RNVC: 9
F300 0T 022 2230: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-441-0958
Extension Handle

144410958
NO PRIMARY REF14-441-0958: RNCC: 3 | RNVC: 2
717-026: RNCC: 5 | RNVC: 9

22 Aug 1990

5340-14-314-2284
Webbing Strap

143142284
160-72989-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-529-5528
Self-Locking Insert

145295528
330A21-0511-21: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-517-8929
Angle Bracket

145178929
427-10036D: RNCC: 3 | RNVC: 2
K00926X: RNCC: 5 | RNVC: 2

17 Jan 2000

5340-14-435-9704
Mounting Bracket

144359704
332A61-2332-05: RNCC: 3 | RNVC: 2

29 Nov 1989

5340-14-496-7014
Mounting Plate

144967014
IF185-285: RNCC: 3 | RNVC: 9
F300 0T 021 9300: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-301-8942
Angle Bracket

143018942
NO PRIMARY REF14-301-8942: RNCC: 3 | RNVC: 2
A420797: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-326-7445
Handwheel

143267445
ECHH90A1-3REP1: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-459-6845
Retaining Strap

144596845
A10140-03-0000P026: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-553-1580
Mounting Bracket

145531580
252450403-00: RNCC: 3 | RNVC: 2

7 Mar 2007

5340-14-370-7337
Access Cover

143707337
676-12413-00-94: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-523-8765
Access Cover

145238765
1001A246-001: RNCC: 3 | RNVC: 2

8 Feb 2001

5340-14-448-9096
Mounting Plate

144489096
11-3735-035: RNCC: 3 | RNVC: 9

24 Jul 1991

5340-14-421-9518
Rod End Clevis

144219518
M371-02511: RNCC: 3 | RNVC: 2

10 Feb 1988

5340-14-381-0741
Rod End Clevis

143810741
SK1-20510: RNCC: 3 | RNVC: 2

14 Dec 1982

5340-14-413-9910
Runner

144139910
13-201-04: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-031-8140
Access Cover

140318140
5478429-405: RNCC: 3 | RNVC: 2
5478429-405S: RNCC: 3 | RNVC: 2
5478429405: RNCC: 5 | RNVC: 2
5478429405S: RNCC: 5 | RNVC: 2

5 Jul 1980

5340-14-433-0869
Loop Clamp

144330869
514-501-8: RNCC: 3 | RNVC: 2
DFE100606: RNCC: 5 | RNVC: 2

7 Jul 1989

5340-14-448-7161
Detent Plunger

144487161
A03037-10-2030P012: RNCC: 3 | RNVC: 2

4 Jul 1991

5340-14-201-6055
Loop Clamp

142016055
ASNA0021-15N12: RNCC: 1 | RNVC: 2
51100005012: RNCC: 3 | RNVC: 2
A0021-15N12: RNCC: 5 | RNVC: 2
150011200: RNCC: 5 | RNVC: 2
15N12: RNCC: 5 | RNVC: 2
15NA12: RNCC: 5 | RNVC: 2

1 Jan 1962

5340-14-317-9468
Access Cover

143179468
4402-030: RNCC: 3 | RNVC: 2
4402-030: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-434-5384
Angle Bracket

144345384
RP35P120-451: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-386-8692
Detent Plunger

143868692
0625-504-520A: RNCC: 3 | RNVC: 2
85-692-0300: RNCC: 6 | RNVC: 9

24 Aug 1983

5340-14-217-9012
Loop Clamp

142179012
3160S23-01-035: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-471-5574
Mounting Plate

144715574
22617-000-00: RNCC: 3 | RNVC: 2
Z00.N7687262617: RNCC: 5 | RNVC: 2
Z00.N7687262617TBM: RNCC: 5 | RNVC: 9

31 Aug 1994

5340-14-488-1224
Access Cover

144881224
123-01-134: RNCC: 3 | RNVC: 2

18 Apr 1997

5340-14-207-2655
Loop Clamp

142072655
3160S69-10-809: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-330-0592
Mounting Plate

143300592
9125846000: RNCC: 3 | RNVC: 2
9125846000: RNCC: 5 | RNVC: 9
85-509-4961: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-308-3474
Retaining Strap

143083474
628-01-121: RNCC: 3 | RNVC: 2
628-01-121: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-386-4924
Access Cover

143864924
FA1R703-50-43: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-381-8399
Shelf Bracket

143818399
NO PRIMARY REF14-381-8399: RNCC: 3 | RNVC: 2
16932083: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-323-7515
Doorknob

143237515
262-20-81214-01: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-549-5019
Runner

145495019
MC201-215272-34: RNCC: 3 | RNVC: 2

11 Apr 2006

5340-14-220-1395
Cover Strip

142201395
3160S25-23-008: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-301-4484
Butt Hinge

143014484
J36-220-80X55DLAIT0N: RNCC: 2 | RNVC: 2

1 Jan 1973

5340-14-349-3628
Furniture Leg Tip

143493628
NO PRIMARY REF14-349-3628: RNCC: 3 | RNVC: 2
Z49961: RNCC: 5 | RNVC: 9

22 May 1978

5340-14-541-9568
Mounting Plate

145419568
65224133-001: RNCC: 3 | RNVC: 2
502114003023A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-503-0978
Angle Bracket

145030978
NO PRIMARY REF14-503-0978: RNCC: 3 | RNVC: 2
011040190000: RNCC: 5 | RNVC: 2

7 Jan 1998

5340-14-401-7367
Expansion Shield

144017367
64168-8HHDM6-32: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-393-2134
Sliding Door Track

143932134
365A87-3018-64: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-14-431-2661
Angle Bracket

144312661
3160S25-28-282: RNCC: 3 | RNVC: 2

12 Apr 1989

5340-14-358-6089
Loop Clamp

143586089
330A75-9514-2101: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-318-5463
Loop Clamp

143185463
511EQ0055REP21: RNCC: 3 | RNVC: 2
511EQ055REP21: RNCC: 5 | RNVC: 2
A0386-002F10: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-466-9016
Loop Clamp

144669016
9463105121: RNCC: 3 | RNVC: 2
N498-65: RNCC: 5 | RNVC: 2
F300 0T 015 4930: RNCC: 5 | RNVC: 9

8 Dec 1993

5340-14-541-5239
Angle Bracket

145415239
1091548-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-527-8458
Bumper

145278458
J05655-07-1000P007: RNCC: 3 | RNVC: 2

27 Nov 2001

5340-14-419-7120
Retaining Strap

144197120
M427-402931: RNCC: 3 | RNVC: 2

5 Nov 1987

5340-14-435-2880
Angle Bracket

144352880
332A58-2063-21: RNCC: 3 | RNVC: 2
F300 0T 009 8757: RNCC: 5 | RNVC: 9

2 Nov 1989

5340-14-531-8581
Mounting Bracket

145318581
19A4001-10: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-14-467-5639
Mounting Bracket

144675639
312-09096-001: RNCC: 3 | RNVC: 2

19 Jan 1994

5340-14-298-2733
Butt Hinge

142982733
8007-2000X30X1-6X3X25: RNCC: 3 | RNVC: 2
VDP1006: RNCC: 5 | RNVC: 2
VDPM00541: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-339-8318
Butt Hinge

143398318
64-12: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-226-9531
Butt Hinge

142269531
M3C192-12M1: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-258-5039
Corner Brace

142585039
10282: RNCC: 3 | RNVC: 2
MQ-19A: RNCC: 6 | RNVC: 9

1 Jan 1969

5340-14-443-6291
Loop Clamp

144436291
415809-200: RNCC: 3 | RNVC: 2
415809-200: RNCC: 5 | RNVC: 2
415809-200: RNCC: 5 | RNVC: 9

30 Nov 1990

5340-14-499-1467
Leakproof Seal Plug

144991467
003183: RNCC: 3 | RNVC: 2
K37374-40: RNCC: 5 | RNVC: 2
K3737440: RNCC: 5 | RNVC: 2
F300 0T 019 5010: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-251-4782
Leaf Spring

142514782
E4M703-25-08: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-503-0689
Retaining Strap

145030689
NO PRIMARY REF14-503-0689: RNCC: 3 | RNVC: 2
51982: RNCC: 5 | RNVC: 9

7 Jan 1998

5340-14-324-8834
Webbing Strap

143248834
330A91-2000-12: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-438-4774
Pipe Hanger

144384774
332A61-1334-00: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-345-2780
Loop Clamp

143452780
FF1E701-66: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-312-4620
Door Handle

143124620
NO PRIMARY REF14-312-4620: RNCC: 3 | RNVC: 2
4600-01-173-2129T9: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-392-7445
Bow Handle

143927445
NO PRIMARY REF14-392-7445: RNCC: 3 | RNVC: 2
869022016: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-14-467-6133
Suction Cup

144676133
NO PRIMARY REF14-467-6133: RNCC: 3 | RNVC: 2
17A46: RNCC: 5 | RNVC: 2

19 Jan 1994

5340-14-320-1518
Angle Bracket

143201518
28-10-22: RNCC: 3 | RNVC: 2
28-10-22: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-250-5101
Retaining Strap

142505101
321A23-2103-20: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-520-2658
Butt Hinge

145202658
42-1-3767: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-493-7892
Loop Clamp

144937892
6981-L1: RNCC: 3 | RNVC: 2
SRV000020: RNCC: 3 | RNVC: 2
F300 0T 014 0555: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-412-2077
Angle Bracket

144122077
332A21-1356-34: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-465-1492
Angle Bracket

144651492
365A23-1674-20: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-467-4301
Mounting Bracket

144674301
160R742233-15: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-14-528-1504
Mounting Plate

145281504
4372-0083: RNCC: 3 | RNVC: 2

4 Jan 2002

5340-14-552-5438
Angle Bracket

145525438
350A25-1279-27: RNCC: 3 | RNVC: 2

15 Jan 2007

5340-14-362-4212
Runner

143624212
NO PRIMARY REF14-362-4212: RNCC: 3 | RNVC: 2
F2031176: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-475-2522
Mounting Plate

144752522
332A76-3108-00: RNCC: 3 | RNVC: 2

22 Mar 1995

5340-14-529-3453
Mounting Bracket

145293453
457-02407-000: RNCC: 3 | RNVC: 2

22 Mar 2002

5340-14-396-3842
Bumper

143963842
IF032-017: RNCC: 3 | RNVC: 9

27 Nov 1984

5340-14-450-7301
Handwheel

144507301
4603-160-005: RNCC: 3 | RNVC: 9

21 Oct 1991

5340-14-374-7200
Bumper

143747200
365A21-3417-23: RNCC: 3 | RNVC: 2

30 Jan 1982

5340-14-465-1689
Angle Bracket

144651689
365A61-8341-20: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-409-5012
Rod End Clevis

144095012
ST159-2M517P59: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-454-6932
Mounting Plate

144546932
2085-02-008: RNCC: 3 | RNVC: 2
89411572: RNCC: 5 | RNVC: 9

9 Apr 1992

5340-14-277-1378
Threaded Rod End

142771378
M271-3031: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-486-3732
Plug Button

144863732
262-10-11346-05: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-452-0129
Loop Clamp

144520129
ASNA0021-20G25: RNCC: 3 | RNVC: 2
A0021-20G25: RNCC: 5 | RNVC: 2

18 Dec 1991

5340-14-286-5076
Angle Bracket

142865076
341A25-1049-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-434-1977
Swivel Caster

144341977
109-4NNSR: RNCC: 3 | RNVC: 9
MPR109-4NNSR: RNCC: 5 | RNVC: 9

12 Sep 1989

5340-14-217-9132
Cover Strip

142179132
3160S25-24-049: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-303-8353
Handwheel

143038353
773-417-166FF10: RNCC: 3 | RNVC: 2
773-414-166FF10: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-441-8904
Rod End Clevis

144418904
PA268-4M33P14: RNCC: 2 | RNVC: 2
PA268-4M33P14: RNCC: 3 | RNVC: 2

24 Sep 1990

5340-14-386-0081
Surface Bolt

143860081
8627-17: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-249-9617
Threaded Rod End

142499617
D2140-5-80: RNCC: 3 | RNVC: 2
D2140-5-80: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-328-5985
Metal Grille

143285985
321A58-0824-43: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-389-5335
Access Cover

143895335
365A81-0083-00: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-252-9416
Retaining Strap

142529416
1521-63-259: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-374-4185
Handwheel

143744185
GSM137-013F23: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-224-0222
Handwheel

142240222
GSM137-001F18DET5SANSB0ULEAS10G: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-220-4836
Mending Plate

142204836
NO PRIMARY REF14-220-4836: RNCC: 3 | RNVC: 2
22168: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-473-8608
Mounting Bracket

144738608
332A87-0256-01: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-444-0844
Clamping Catch

144440844
GRP520ZB: RNCC: 3 | RNVC: 2
GRP520-ZB: RNCC: 5 | RNVC: 2

18 Dec 1990

5340-14-476-0416
Section Block Clamp

144760416
207310017: RNCC: 3 | RNVC: 2
PAA73-10-017: RNCC: 5 | RNVC: 2

17 May 1995

5340-14-410-3086
Spring Window Bolt

144103086
332A22-1378-20: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-14-416-5781
Catch Strike

144165781
0300310880: RNCC: 3 | RNVC: 2
85-693-4638: RNCC: 6 | RNVC: 9

18 Jun 1987

5340-14-418-4984
Catch Strike

144184984
4771906240: RNCC: 3 | RNVC: 2

26 Aug 1987

5340-14-510-0209
Lock Bolt

145100209
NO PRIMARY REF14-510-0209: RNCC: 3 | RNVC: 2
U754: RNCC: 5 | RNVC: 9
5340AA2009482: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-524-2019
Mounting Bracket

145242019
ST159-2M762P148: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-201-6059
Loop Clamp

142016059
51100005040: RNCC: 3 | RNVC: 2
15N40: RNCC: 5 | RNVC: 2
A0021-15N40: RNCC: 5 | RNVC: 2

1 Jan 1962

5340-14-230-2029
Mending Plate

142302029
NO PRIMARY REF14-230-2029: RNCC: 3 | RNVC: 2
000268005P: RNCC: 5 | RNVC: 2
88385: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-217-3072
Loop Clamp

142173072
3160S73-69-595: RNCC: 3 | RNVC: 2

1 Jan 1965

Load More Results