What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 33 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 33 of 446

5340-14-370-8727
Pipe Hanger

143708727
303-992-902-0: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-441-6686
Butt Hinge

144416686
BN339-506A02-0-024: RNCC: 2 | RNVC: 2

10 Sep 1990

5340-14-453-7489
Mounting Plate

144537489
2085-01-010: RNCC: 3 | RNVC: 2
89411559: RNCC: 5 | RNVC: 9

5 Mar 1992

5340-14-472-6621
Mounting Bracket

144726621
A2-73073: RNCC: 3 | RNVC: 2

9 Nov 1994

5340-14-472-4818
Mounting Plate

144724818
132E459-00: RNCC: 3 | RNVC: 2
132E459-00: RNCC: 5 | RNVC: 9

26 Oct 1994

5340-14-434-0422
Protection Bellows

144340422
6284-33011: RNCC: 3 | RNVC: 2

30 Aug 1989

5340-14-405-9949
Rod End Clevis

144059949
D8995-3034-9973-000: RNCC: 3 | RNVC: 2

18 Dec 1985

5340-14-520-5097
Arched Cushion

145205097
MAT169-0012F22DE27: RNCC: 3 | RNVC: 2

19 May 2000

5340-14-377-0834
Mounting Plate

143770834
C60-58000: RNCC: 3 | RNVC: 2
C60-58000: RNCC: 5 | RNVC: 2

28 Apr 1982

5340-14-390-5468
Mounting Plate

143905468
LN446-001REP3: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-519-0978
Angle Bracket

145190978
139E328-00: RNCC: 3 | RNVC: 2
139E328-00: RNCC: 5 | RNVC: 9

7 Mar 2000

5340-14-490-4694
Mounting Bracket

144904694
741-30-124: RNCC: 3 | RNVC: 2

2 Oct 1997

5340-14-337-3762
Access Cover

143373762
E4M231-17-19: RNCC: 3 | RNVC: 2
EA1M231-17-19: RNCC: 5 | RNVC: 2

7 Oct 1976

5340-14-365-7158
Buckle

143657158
A2002-18: RNCC: 3 | RNVC: 9

8 Oct 1980

5340-14-475-8721
Mounting Bracket

144758721
1057649S00: RNCC: 1 | RNVC: 2
91-226-02: RNCC: 3 | RNVC: 2

10 May 1995

5340-14-554-9953
Mounting Bracket

145549953
260651301-00: RNCC: 3 | RNVC: 2

17 Sep 2007

5340-14-401-3389
Push Door Plate

144013389
2016-51-04: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-490-5543
Mounting Plate

144905543
J05085-04-0800P049: RNCC: 3 | RNVC: 2

2 Oct 1997

5340-14-363-2164
Retaining Strap

143632164
3130S78-15-438: RNCC: 3 | RNVC: 2
85-689-9177: RNCC: 6 | RNVC: 9

3 Apr 1980

5340-14-305-7924
Mending Plate

143057924
773-418-062FF35DET106: RNCC: 3 | RNVC: 2
773-418-062FF35DET106: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-339-6510
Bow Handle

143396510
3511 130 14441: RNCC: 3 | RNVC: 2
3511-130-14441: RNCC: 5 | RNVC: 2

18 Jan 1977

5340-14-339-5884
Mending Plate

143395884
3130S73-30-113: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-462-1263
Loop Clamp

144621263
LN400018-F7REPB1: RNCC: 3 | RNVC: 2
RAB0804: RNCC: 5 | RNVC: 2

6 Apr 1993

5340-14-202-2130
Rod End Clevis

142022130
STE90: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-474-2955
Mounting Bracket

144742955
20712767: RNCC: 3 | RNVC: 2

8 Feb 1995

5340-14-341-0334
Bail Handle

143410334
BF105: RNCC: 3 | RNVC: 9

16 Mar 1977

5340-14-505-0308
Mounting Plate

145050308
111041V: RNCC: 3 | RNVC: 2
5000419937: RNCC: 5 | RNVC: 2
CHN111041V: RNCC: 5 | RNVC: 9

11 Mar 1998

5340-14-510-8534
Angle Bracket

145108534
3078699030: RNCC: 3 | RNVC: 2

18 Nov 1998

5340-14-454-1065
Blank Panel

144541065
16759237: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-547-4553
Retaining Clip

145474553
5010377996: RNCC: 3 | RNVC: 2

13 Oct 2005

5340-14-376-4782
Angle Bracket

143764782
16559977: RNCC: 3 | RNVC: 2
16559977: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-366-8300
Retaining Strap

143668300
15173788: RNCC: 3 | RNVC: 2
15173788: RNCC: 5 | RNVC: 2
15173788: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-455-5673
Mounting Bracket

144555673
1060171: RNCC: 3 | RNVC: 2
1060171: RNCC: 5 | RNVC: 9
5044644: RNCC: 5 | RNVC: 9

28 May 1992

5340-14-427-6111
Loop Clamp

144276111
61211917076: RNCC: 3 | RNVC: 2
540P76: RNCC: 5 | RNVC: 2
99-670-4105-62: RNCC: 5 | RNVC: 2
99670410562: RNCC: 5 | RNVC: 2

26 Oct 1988

5340-14-238-9747
Rod End Clevis

142389747
711563: RNCC: 3 | RNVC: 9
062711563: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-547-7476
Mounting Bracket

145477476
100 765 43: RNCC: 3 | RNVC: 2
AA018152: RNCC: 6 | RNVC: 9

9 Nov 2005

5340-14-479-3588
Mounting Bracket

144793588
23626198-6: RNCC: 3 | RNVC: 2

10 Jan 1996

5340-14-527-2519
Access Cover

145272519
A557108: RNCC: 3 | RNVC: 2

17 Oct 2001

5340-14-486-1776
Loop Clamp

144861776
63220-8: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-463-5359
Runner

144635359
T439AE35: RNCC: 3 | RNVC: 2
5046420: RNCC: 5 | RNVC: 9
T439AE35: RNCC: 5 | RNVC: 9

17 Jun 1993

5340-14-507-0093
Bridge Clamp

145070093
5005034016: RNCC: 3 | RNVC: 2

3 Jun 1998

5340-14-550-4982
Mounting Bracket

145504982
6801LOA142200: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-401-5835
Bail Handle

144015835
050A69-612049C: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-526-8174
Loop Clamp

145268174
5003085013: RNCC: 3 | RNVC: 2

7 Sep 2001

5340-14-474-3959
Blank Panel

144743959
802H529: RNCC: 3 | RNVC: 2
802H529: RNCC: 5 | RNVC: 2

15 Feb 1995

5340-14-513-8781
Angle Bracket

145138781
648299: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-210-5645
Mending Plate

142105645
70888418: RNCC: 3 | RNVC: 2
70888418: RNCC: 5 | RNVC: 9
888418: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-522-9740
Mounting Bracket

145229740
0319602140: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-14-512-6865
Mounting Bracket

145126865
10422206: RNCC: 3 | RNVC: 2

19 Feb 1999

5340-14-398-9048
Rod End Clevis

143989048
12666: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-533-8090
Mounting Bracket

145338090
1013964N01: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-295-1206
Rod End Clevis

142951206
281170: RNCC: 3 | RNVC: 2
281170: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-497-6568
Mounting Plate

144976568
6A4109: RNCC: 3 | RNVC: 2
F300 0T 023 4614: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-501-6081
Butt Hinge

145016081
F300 0T 025 1243: RNCC: 3 | RNVC: 2
45674567: RNCC: 5 | RNVC: 2

5 Nov 1997

5340-14-536-4162
Bumper

145364162
208275: RNCC: 3 | RNVC: 2

5 Aug 2003

5340-14-363-5539
Angle Bracket

143635539
79059145: RNCC: 3 | RNVC: 2
79059145: RNCC: 5 | RNVC: 9

9 May 1980

5340-14-528-5574
Angle Bracket

145285574
374064: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-511-7060
Webbing Strap

145117060
R6164A050: RNCC: 3 | RNVC: 2

12 Jan 1999

5340-14-479-5136
Mounting Bracket

144795136
23627901-6: RNCC: 3 | RNVC: 2

17 Jan 1996

5340-14-470-3110
Access Cover

144703110
303412: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-548-2322
Bumper

145482322
43801037: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-14-442-7811
Arched Cushion

144427811
BA30089050-139,7: RNCC: 2 | RNVC: 2

5 Nov 1990

5340-14-415-3087
Pipe Hanger

144153087
ST08-00-28F2-8DEXT30: RNCC: 3 | RNVC: 2
33017: RNCC: 5 | RNVC: 9
ST08-00-28F2-8DEXT30: RNCC: 5 | RNVC: 9

29 Apr 1987

5340-14-294-1620
Loop Clamp

142941620
55218-314B237DB: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-523-5560
Plug Button

145235560
330A32-5143-20: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-14-303-5160
Butt Hinge

143035160
3160S23-11-294: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-435-2999
Angle Bracket

144352999
341A62-1346-20: RNCC: 3 | RNVC: 2

2 Nov 1989

5340-14-549-6218
Mounting Plate

145496218
JCB 10 135-741: RNCC: 3 | RNVC: 2

24 Apr 2006

5340-14-442-5037
Loop Clamp

144425037
201267-04725: RNCC: 3 | RNVC: 2

17 Oct 1990

5340-14-245-0059
Snap Hook

142450059
NO PRIMARY REF14-245-0059: RNCC: 3 | RNVC: 2
MLE1937M186: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-474-1019
Mounting Bracket

144741019
F7987 5233-89: RNCC: 3 | RNVC: 9

25 Jan 1995

5340-14-314-3882
Access Cover

143143882
998-10-003: RNCC: 3 | RNVC: 2
998-10-003: RNCC: 5 | RNVC: 2
998-10-003: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-536-4970
Expansion Shield

145364970
NO PRIMARY REF14-536-4970: RNCC: 3 | RNVC: 2
289-865: RNCC: 5 | RNVC: 9
SC086707: RNCC: 6 | RNVC: 9

28 Aug 2003

5340-14-371-8637
Handwheel

143718637
GSM137-034F5: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-368-2271
Anchor Strap

143682271
K21462-77: RNCC: 3 | RNVC: 2
2166429: RNCC: 5 | RNVC: 2
2166429: RNCC: 5 | RNVC: 2

20 Feb 1981

5340-14-461-4830
Mounting Bracket

144614830
2156-01-008: RNCC: 3 | RNVC: 2
89480017: RNCC: 5 | RNVC: 9

10 Mar 1993

5340-14-390-9206
Swivel Caster

143909206
0004-0022: RNCC: 3 | RNVC: 2
SAF0004-0022: RNCC: 5 | RNVC: 9

1 Mar 1984

5340-14-549-6381
Utility Access Door

145496381
JCB 10 136-850: RNCC: 3 | RNVC: 2

24 Apr 2006

5340-14-298-8300
Expansion Plug

142988300
NO PRIMARY REF14-298-8300: RNCC: 3 | RNVC: 2
80111: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-369-1834
Rod End Connector

143691834
365A91-3048-00: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-568-8217
Utility Resilient Mount

145688217
BFN45-45: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-14-324-1585
Butt Hinge

143241585
301C0017-H-20: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-510-1352
Access Cover

145101352
F234-14830RS1: RNCC: 3 | RNVC: 2
F234-14-830RS1: RNCC: 5 | RNVC: 2
1560AA8010459: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-439-3247
Retaining Strap

144393247
AR-F5: RNCC: 3 | RNVC: 2
78760-03: RNCC: 5 | RNVC: 2
ARF5: RNCC: 5 | RNVC: 2

25 Apr 1990

5340-14-338-8151
Loop Clamp

143388151
51213102004: RNCC: 3 | RNVC: 2
A0021-20G04: RNCC: 5 | RNVC: 2
20G4: RNCC: 5 | RNVC: 2

17 Dec 1976

5340-14-268-9898
Handwheel

142689898
GSM137-007F22ACIER: RNCC: 3 | RNVC: 2
MAT137-003F10ACIER: RNCC: 3 | RNVC: 2
553-000MA060F5-7C1: RNCC: 5 | RNVC: 2
GSM137-07F22ACIER: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-365-4509
Access Cover

143654509
4070-190A207: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-416-1974
Mending Plate

144161974
M427-02227: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-526-4725
Pipe Hanger

145264725
78731-038-037: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-032-3296
Mounting Plate

140323296
CMT20E5624PL4-5FE15-700X1400: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-464-8910
Mounting Bracket

144648910
312-16518-001: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-546-7325
Mounting Bracket

145467325
S258A4012112: RNCC: 3 | RNVC: 2

9 Aug 2005

5340-14-503-9675
Retaining Band

145039675
COLLI93894C00: RNCC: 3 | RNVC: 2
COLLI93894B00: RNCC: 5 | RNVC: 9

4 Feb 1998

5340-14-471-2976
Mortise Lock Set

144712976
5280INOXDROITTIRANT: RNCC: 3 | RNVC: 2

12 Aug 1994

5340-14-496-4829
Loop Clamp

144964829
925002902: RNCC: 3 | RNVC: 2
F300 0T 021 5782: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-517-7396
Loop Clamp

145177396
501-779-792-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-547-5331
Angle Bracket

145475331
RA1M702201207N1: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-381-6002
Mortise Lock Set

143816002
1275: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-344-2095
Access Cover

143442095
713467: RNCC: 3 | RNVC: 2
5171346700: RNCC: 5 | RNVC: 2

10 Aug 1977

5340-14-546-6396
Mounting Bracket

145466396
EQUERRES: RNCC: 3 | RNVC: 2
EQUERRES: RNCC: 5 | RNVC: 2

21 Jul 2005

5340-14-545-4560
Angle Bracket

145454560
RA1M703880141N1: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-530-9803
Access Cover

145309803
RA1M623393802A1: RNCC: 3 | RNVC: 2

18 Jul 2002

5340-14-482-3539
Loop Clamp Kit

144823539
100140: RNCC: 3 | RNVC: 2

5 Jul 1996

5340-14-350-4567
Detent Plunger

143504567
208560: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-397-9062
Retaining Strap

143979062
916152510: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-511-5129
Strap Fastener Loop

145115129
11865G: RNCC: 3 | RNVC: 2
222703003: RNCC: 5 | RNVC: 2
222703003: RNCC: 5 | RNVC: 9

16 Dec 1998

5340-14-496-9594
Mounting Plate

144969594
27132366-9: RNCC: 3 | RNVC: 2
F300 0T 022 3232: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-461-2836
Angle Bracket

144612836
5000728948: RNCC: 3 | RNVC: 2
89287686: RNCC: 5 | RNVC: 2

3 Mar 1993

5340-14-546-3010
Mounting Bracket

145463010
10598954: RNCC: 3 | RNVC: 2

22 Jun 2005

5340-14-448-9654
Anchor Strap

144489654
BAZ95317: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-14-341-8177
Access Cover

143418177
713779: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-541-2543
Access Cover

145412543
205045: RNCC: 3 | RNVC: 2

25 May 2004

5340-14-479-4657
Mounting Bracket

144794657
403A471: RNCC: 3 | RNVC: 2
403A471: RNCC: 5 | RNVC: 9

15 Jan 1996

5340-14-535-2209
Mounting Bracket

145352209
10657489: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-494-1784
Angle Bracket

144941784
5000991519: RNCC: 3 | RNVC: 2
F300 0T 015 8816: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-375-4649
Loop Clamp

143754649
052185: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-449-3190
Runner

144493190
565A002: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-504-5353
Loop Clamp

145045353
3831V005: RNCC: 3 | RNVC: 2

18 Feb 1998

5340-14-386-1274
Loop Clamp

143861274
399527: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-418-5606
Angle Bracket

144185606
BJM00260: RNCC: 3 | RNVC: 2

2 Sep 1987

5340-14-514-6088
Loop Clamp

145146088
427417110: RNCC: 3 | RNVC: 2

2 Jun 1999

5340-14-511-1525
Protection Bellows

145111525
3CM2300A: RNCC: 3 | RNVC: 2

7 Dec 1998

5340-14-553-5406
Mounting Bracket

145535406
82124180000: RNCC: 3 | RNVC: 2

13 Apr 2007

5340-14-426-4700
Bumper

144264700
BFP00837: RNCC: 3 | RNVC: 2

1 Sep 1988

5340-14-502-3689
Angle Bracket

145023689
E4690260: RNCC: 3 | RNVC: 9

9 Dec 1997

5340-14-460-0387
Mounting Bracket

144600387
323768: RNCC: 3 | RNVC: 2
323768: RNCC: 5 | RNVC: 9

7 Jan 1993

5340-14-353-2168
Angle Bracket

143532168
356002100003: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-433-5379
Runner

144335379
8164577: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-200-0031
Retaining Clip

142000031
3CGF522-55: RNCC: 3 | RNVC: 2
3CGF522-55: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-14-461-4678
Mounting Bracket

144614678
807943: RNCC: 3 | RNVC: 2

10 Mar 1993

5340-14-321-6710
Mounting Bracket

143216710
0235617020: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-479-5185
Detent Plunger

144795185
069A34-685919A: RNCC: 3 | RNVC: 2
0685919A00: RNCC: 5 | RNVC: 2

17 Jan 1996

5340-14-542-3014
Mounting Bracket

145423014
988981723: RNCC: 3 | RNVC: 2
988981723: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-256-2628
Butt Hinge

142562628
DV5094: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-489-5395
Control Rod

144895395
39406747: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-14-523-6433
Mounting Plate

145236433
D3722806: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-344-3040
Loop Clamp

143443040
51110605008: RNCC: 3 | RNVC: 2
25F8: RNCC: 5 | RNVC: 2
9560126520: RNCC: 5 | RNVC: 2

10 Aug 1977

5340-14-361-8623
Loop Clamp

143618623
51123105031: RNCC: 3 | RNVC: 2
24GE31: RNCC: 5 | RNVC: 2
25GE31: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-14-557-5575
Utility Resilient Mount

145575575
7421118680: RNCC: 1 | RNVC: 2
IEX530642 14: RNCC: 3 | RNVC: 2

20 Jun 2008

5340-14-523-4367
Mounting Plate

145234367
H201AA136: RNCC: 3 | RNVC: 2
H201AA136: RNCC: 5 | RNVC: 9

22 Jan 2001

5340-14-358-5408
Retaining Strap

143585408
114083006: RNCC: 3 | RNVC: 2
114083006: RNCC: 5 | RNVC: 2

7 Sep 1979

5340-14-536-1095
Mounting Bracket

145361095
803237140117: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-448-1241
Mounting Plate

144481241
0120723001: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-524-9637
Mounting Plate

145249637
04254: RNCC: 3 | RNVC: 2

9 May 2001

5340-14-478-3915
Loop Clamp Kit

144783915
1036987F00: RNCC: 3 | RNVC: 2

26 Oct 1995

5340-14-367-8116
Butt Hinge

143678116
R4A242-41-930: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-481-5255
Butt Hinge

144815255
CCM601-110-811: RNCC: 3 | RNVC: 2

15 May 1996

5340-14-216-7238
Bumper

142167238
773-410-080DET6: RNCC: 3 | RNVC: 2
773-410-085-F3: RNCC: 3 | RNVC: 2
773-410-080DET6: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-032-3291
Utility Access Door

140323291
CMT20E5624PL4-5FE10-130X230: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-230-7332
Handwheel

142307332
GSM137-001F17-5N1: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-388-8067
Buckle

143888067
A2036-30: RNCC: 3 | RNVC: 9

29 Nov 1983

5340-14-341-9323
Mending Plate

143419323
3296-003: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-525-3127
Snap Hook

145253127
332A91-8106-35: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-495-5916
Angle Bracket

144955916
P56256-06: RNCC: 3 | RNVC: 2
F300 0T 019 5172: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-439-2334
Mounting Plate

144392334
332A36-2134-20: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-379-6197
Pipe Hanger

143796197
E95000-012: RNCC: 3 | RNVC: 2
408C07070707C64: RNCC: 5 | RNVC: 2

1 Oct 1982

5340-14-386-1494
Butt Hinge

143861494
365A25-3074-05: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-542-1226
Mounting Plate

145421226
5302835-043-03: RNCC: 3 | RNVC: 2

7 Jul 2004

5340-14-465-1788
Mounting Plate

144651788
365P61-9038-05: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-347-4126
Bow Handle

143474126
NO PRIMARY REF14-347-4126: RNCC: 3 | RNVC: 2
10A: RNCC: 5 | RNVC: 9

1 Mar 1978

5340-14-532-3289
Access Cover

145323289
2293-221D503: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-340-3167
Angle Bracket

143403167
M3C704-173: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-303-5793
Rod End Clevis

143035793
9090-32: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-244-5579
Bumper

142445579
NO PRIMARY REF14-244-5579: RNCC: 3 | RNVC: 2
Z11677: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-406-2079
Access Cover

144062079
IF037-167: RNCC: 3 | RNVC: 9

8 Jan 1986

5340-14-330-3435
Control Rod

143303435
AY142-380A: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-388-6976
Mending Plate

143886976
F85-210: RNCC: 3 | RNVC: 9

3 Nov 1983

5340-14-388-8064
Buckle

143888064
A2036-20: RNCC: 3 | RNVC: 9

29 Nov 1983

5340-14-472-8561
Arched Cushion

144728561
MAT169-0027F19DE10: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-258-8949
Belt-Strap Keeper

142588949
218948-0: RNCC: 3 | RNVC: 2
03051: RNCC: 5 | RNVC: 2
1081: RNCC: 5 | RNVC: 2
AA27: RNCC: 5 | RNVC: 2
MP1041: RNCC: 5 | RNVC: 2
MP1041: RNCC: 5 | RNVC: 9
1081: RNCC: 5 | RNVC: 9
85-684-6370: RNCC: 6 | RNVC: 9

1 Jan 1969

5340-14-507-0244
Handle Grip

145070244
JS1113-174: RNCC: 3 | RNVC: 2
JOSJS1113-174: RNCC: 5 | RNVC: 9

3 Jun 1998

5340-14-549-6383
Utility Access Door

145496383
JCB 10 136-854: RNCC: 3 | RNVC: 2

24 Apr 2006

5340-14-430-4003
Angle Bracket

144304003
14400526W: RNCC: 3 | RNVC: 2

20 Mar 1989

5340-14-462-0593
Access Cover

144620593
1698356M1: RNCC: 3 | RNVC: 2
1698356M1: RNCC: 5 | RNVC: 9

31 Mar 1993

5340-14-467-4078
Access Cover

144674078
1039240W00: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-14-547-9665
Angle Bracket

145479665
RA1M701226019: RNCC: 3 | RNVC: 2

30 Nov 2005

5340-14-335-2945
Access Door Hinge

143352945
195386: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-356-8122
Threaded Rod End

143568122
253828: RNCC: 3 | RNVC: 2
253828: RNCC: 5 | RNVC: 9

15 May 1979

5340-14-328-7548
Access Cover

143287548
1030921120: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-397-1653
Loop Clamp

143971653
785-94: RNCC: 3 | RNVC: 2

1 Dec 1984

5340-14-378-2940
Access Cover

143782940
02025005000: RNCC: 3 | RNVC: 2
020250050: RNCC: 5 | RNVC: 2

20 Jul 1982

5340-14-214-2001
Access Cover

142142001
6200541: RNCC: 3 | RNVC: 2
6200541: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-554-0241
Mounting Bracket

145540241
358 198: RNCC: 3 | RNVC: 2
358 198: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-14-360-8308
Bumper

143608308
002813020: RNCC: 3 | RNVC: 9
2813020: RNCC: 5 | RNVC: 9

19 Dec 1979

5340-14-542-2096
Mounting Bracket

145422096
380020108: RNCC: 3 | RNVC: 2
380020108: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-343-6926
Mending Plate

143436926
4770010800: RNCC: 3 | RNVC: 2

13 Jul 1977

5340-14-544-9452
Mounting Bracket

145449452
1503 3140 00: RNCC: 3 | RNVC: 2

7 Mar 2005

5340-14-520-0176
Mounting Plate

145200176
10596463: RNCC: 3 | RNVC: 2

3 May 2000

5340-14-391-5410
Loop Clamp

143915410
399525: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-506-0376
Angle Bracket

145060376
RP1M508835640: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-14-486-3036
Shelf Bracket

144863036
MP1466F00: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-425-7187
Angle Bracket

144257187
568011: RNCC: 3 | RNVC: 2

21 Jul 1988

5340-14-232-0057
Retaining Clip

142320057
V454C1: RNCC: 3 | RNVC: 2
EW0427: RNCC: 5 | RNVC: 2
EW0427: RNCC: 5 | RNVC: 2
V454C1: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-402-0418
Bumper

144020418
219740: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-460-7069
Mounting Bracket

144607069
45057886: RNCC: 3 | RNVC: 2
45057886: RNCC: 5 | RNVC: 9

4 Feb 1993

5340-14-430-5214
Butt Hinge

144305214
PM1A127131009: RNCC: 3 | RNVC: 2
PM1A127131009: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-418-0553
Flush Catch Claw

144180553
050935L01TM79: RNCC: 3 | RNVC: 2
050935L: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-249-9146
Turnbuckle Body

142499146
ST406M41P17: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-520-1253
Handwheel

145201253
R1 702DN100: RNCC: 3 | RNVC: 2

15 May 2000

5340-14-458-6982
Synchro Clamp

144586982
45057999: RNCC: 3 | RNVC: 2
45057999: RNCC: 5 | RNVC: 9

29 Oct 1992

5340-14-429-8865
Retaining Strap

144298865
567633: RNCC: 3 | RNVC: 2

15 Feb 1989

5340-14-422-9157
Retaining Strap

144229157
251639: RNCC: 3 | RNVC: 2

24 Mar 1988

5340-14-551-9790
Blank Panel

145519790
82167889000: RNCC: 3 | RNVC: 2

15 Nov 2006

5340-14-476-0927
Runner

144760927
222-3018-454: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-330-3591
Butt Hinge

143303591
300X40: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-432-8366
Protection Bellows

144328366
E1075: RNCC: 3 | RNVC: 2

28 Jun 1989

5340-14-279-2816
Loop Clamp

142792816
160-78660: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-460-5517
Mounting Bracket

144605517
7700761807: RNCC: 3 | RNVC: 2
7701464297: RNCC: 5 | RNVC: 2

29 Jan 1993

5340-14-507-0090
Loop Clamp

145070090
5003083062: RNCC: 3 | RNVC: 2

3 Jun 1998

5340-14-485-1413
Angle Bracket

144851413
3BM00707AAAA: RNCC: 3 | RNVC: 2
3BM00707AAAA: RNCC: 5 | RNVC: 9

10 Jan 1997

5340-14-407-6473
Pipe Hanger

144076473
03770D: RNCC: 3 | RNVC: 2

27 Feb 1986

5340-14-535-3929
Angle Bracket

145353929
5010315677: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-238-3513
Loop Clamp

142383513
23522: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-345-0149
Bumper

143450149
6635: RNCC: 3 | RNVC: 2
6635: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-421-3005
Retaining Strap

144213005
39211752: RNCC: 3 | RNVC: 2

14 Jan 1988

5340-14-438-2752
Bumper

144382752
815-0-79-975: RNCC: 3 | RNVC: 2

12 Mar 1990

5340-14-393-3929
Clamping Catch

143933929
0550-000/2003: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-302-1213
Mending Plate

143021213
A10-74-107-20-0: RNCC: 3 | RNVC: 2
A10-74-107-20-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-410-7569
Rod End Clevis

144107569
A02560-01-2000P003: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-487-4895
Mending Plate

144874895
Z3122847: RNCC: 3 | RNVC: 2
Z31228-47: RNCC: 5 | RNVC: 2

10 Apr 1997

5340-14-476-2194
Hand Crank Arm

144762194
NO PRIMARY REF14-476-2194: RNCC: 3 | RNVC: 2
73-1007-4: RNCC: 5 | RNVC: 2

31 May 1995

5340-14-437-2395
Handwheel

144372395
AL TYPE 111 80 S: RNCC: 3 | RNVC: 2
AL TYPE 111 80S: RNCC: 5 | RNVC: 2
AL-TYPE111-80S: RNCC: 5 | RNVC: 2

23 Jan 1990

5340-14-411-1186
Access Cover

144111186
5172279500: RNCC: 3 | RNVC: 2
30500-0493: RNCC: 3 | RNVC: 2
722795: RNCC: 5 | RNVC: 9

6 Aug 1986

5340-14-447-7681
Rod End Clevis

144477681
8703BRA301-10-03: RNCC: 3 | RNVC: 2
8703BRA301-10-03: RNCC: 3 | RNVC: 9

4 Jun 1991

5340-14-410-6370
Retaining Strap

144106370
P1-7951-67: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-407-6565
Mounting Plate

144076565
4-312-1009: RNCC: 3 | RNVC: 2

27 Feb 1986

5340-14-225-8379
Synchro Clamp

142258379
S2632-1: RNCC: 3 | RNVC: 2
2632-1: RNCC: 5 | RNVC: 2
85-663-0530: RNCC: 6 | RNVC: 9

1 Jan 1966

5340-14-320-0946
Rod End Clevis

143200946
105-07-16-9: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-395-5351
Mounting Bracket

143955351
5-1881B43152-1248: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-382-8780
Angle Bracket

143828780
330A75-1919-20: RNCC: 3 | RNVC: 2
330A75.1919-20: RNCC: 5 | RNVC: 2

17 Feb 1983

5340-14-489-1930
Flush Catch

144891930
33.43663: RNCC: 3 | RNVC: 2
5010046549: RNCC: 5 | RNVC: 2
33-43663: RNCC: 5 | RNVC: 2
F300 0T 012 4681: RNCC: 6 | RNVC: 9

2 Jul 1997

5340-14-353-5697
Anchor Strap

143535697
NO PRIMARY REF14-353-5697: RNCC: 3 | RNVC: 2
3194470: RNCC: 5 | RNVC: 9

16 Jan 1979

5340-14-536-1333
Loop Clamp

145361333
36402724: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-500-7017
Section Block Clamp

145007017
E64009998014: RNCC: 3 | RNVC: 2
F300 0T 024 7209: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-424-0571
Mounting Plate

144240571
251718: RNCC: 3 | RNVC: 2

10 May 1988

5340-14-362-5448
Retaining Strap

143625448
223813: RNCC: 3 | RNVC: 2

19 Mar 1980

5340-14-535-7617
Mounting Bracket

145357617
T943A2001108: RNCC: 3 | RNVC: 2

25 Jun 2003

5340-14-493-7676
Mounting Plate

144937676
BLC23170: RNCC: 3 | RNVC: 2
F300 0T 013 9714: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-224-8849
Bumper

142248849
GSM1674A29: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-414-9378
Retaining Strap

144149378
16212697: RNCC: 3 | RNVC: 2

26 Mar 1987

5340-14-545-6838
Angle Bracket

145456838
RA1M703746141A1N1: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-505-6981
Mounting Bracket

145056981
A50411: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-506-9241
Mounting Plate

145069241
458913: RNCC: 3 | RNVC: 2

27 May 1998

5340-14-539-9601
Angle Bracket

145399601
RA1B701303051N1: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-526-1830
Angle Bracket

145261830
46038986: RNCC: 3 | RNVC: 2

6 Jul 2001

5340-14-433-9054
Mounting Plate

144339054
RP988649: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-14-417-6709
Angle Bracket

144176709
2218: RNCC: 3 | RNVC: 2

22 Jul 1987

5340-14-377-8324
Mending Plate

143778324
C69571: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-507-9873
Rope Cleat

145079873
8900000223: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-528-9463
Loop Clamp

145289463
EN4113F07WH: RNCC: 2 | RNVC: 2

27 Feb 2002

5340-14-446-1886
Retaining Strap

144461886
2510115000-43: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-200-9973
Retaining Strap

142009973
568677: RNCC: 3 | RNVC: 2
568677: RNCC: 3 | RNVC: 2
568677: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-14-566-6213
Utility Resilient Mount

145666213
261579488: RNCC: 3 | RNVC: 2

30 Nov 2010

5340-14-508-0544
Mounting Plate

145080544
46240293: RNCC: 3 | RNVC: 2
46240293: RNCC: 5 | RNVC: 9

26 Aug 1998

5340-14-528-5460
Loop Clamp

145285460
1220: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-536-6829
Angle Bracket

145366829
47087636: RNCC: 3 | RNVC: 2

10 Sep 2003

5340-14-442-0924
Mounting Bracket

144420924
1290013: RNCC: 3 | RNVC: 2
1290013: RNCC: 5 | RNVC: 9

1 Oct 1990

5340-14-518-2013
Runner

145182013
434423: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-550-5003
Mounting Bracket

145505003
6801EAC122: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-471-9480
Mounting Bracket

144719480
38661524: RNCC: 3 | RNVC: 2
38661524: RNCC: 5 | RNVC: 9

28 Sep 1994

5340-14-474-3961
Mounting Plate

144743961
402T997: RNCC: 3 | RNVC: 2
402T997: RNCC: 5 | RNVC: 2

15 Feb 1995

5340-14-489-9616
Mounting Plate

144899616
009309226P: RNCC: 3 | RNVC: 2

2 Sep 1997

5340-14-355-9155
Leaf Spring

143559155
0000407488: RNCC: 3 | RNVC: 2
0000407488: RNCC: 5 | RNVC: 9
407488: RNCC: 5 | RNVC: 9

5 Apr 1979

5340-14-439-4178
Mounting Plate

144394178
217802: RNCC: 3 | RNVC: 2
217802: RNCC: 5 | RNVC: 9

25 Apr 1990

5340-14-431-2780
Mounting Plate

144312780
7864440000: RNCC: 3 | RNVC: 2

12 Apr 1989

5340-14-453-5535
Mounting Bracket

144535535
624112: RNCC: 3 | RNVC: 2

26 Feb 1992

5340-14-371-6297
Loop Clamp

143716297
MBEU62863: RNCC: 3 | RNVC: 2
033824: RNCC: 5 | RNVC: 2

5 Aug 1981

5340-14-529-4431
Cushioning Pad

145294431
6401BRA100002: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-202-5361
Loop Clamp

142025361
512131050052: RNCC: 3 | RNVC: 2
50G5: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-14-430-6369
Angle Bracket

144306369
9017CPV20012: RNCC: 3 | RNVC: 2

22 Mar 1989

5340-14-520-4199
Mounting Plate

145204199
39991011: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-348-1911
Retaining Strap

143481911
09512094934: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-549-9291
Mounting Plate

145499291
2092549: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-549-9737
Mounting Bracket

145499737
F1262495: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-527-1866
Mounting Bracket

145271866
10526892: RNCC: 3 | RNVC: 2

10 Oct 2001

5340-14-549-1147
Angle Bracket

145491147
RA1M704132021N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-475-5027
Mounting Bracket

144755027
TB1040712: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-14-509-6664
Angle Bracket

145096664
RA1M216900420: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-410-6437
Clamping Catch

144106437
400532: RNCC: 3 | RNVC: 2
BGE400532: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-526-7442
Support Hook

145267442
PM1A761101050: RNCC: 3 | RNVC: 2
PM1A761101050: RNCC: 5 | RNVC: 2

30 Aug 2001

5340-14-366-0452
Angle Bracket

143660452
19299147: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-378-4239
Bumper

143784239
365A91-1150-46: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-452-3095
Mounting Plate

144523095
M275-9008: RNCC: 3 | RNVC: 2
M275-9008: RNCC: 5 | RNVC: 2

8 Jan 1992

5340-14-312-6830
Mending Plate

143126830
262-20-66312-33: RNCC: 3 | RNVC: 2
262-20-66312-03: RNCC: 5 | RNVC: 2
85-800-2678: RNCC: 6 | RNVC: 9

1 Jan 1974

5340-14-375-9393
Access Cover

143759393
M504-210100: RNCC: 3 | RNVC: 2

30 Mar 1982

5340-14-367-0025
Pipe Hanger

143670025
CT52-850-038: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-359-6016
Mending Plate

143596016
P3C003055-00: RNCC: 3 | RNVC: 2
3C003055-00: RNCC: 5 | RNVC: 2
P3C003055-00: RNCC: 5 | RNVC: 9
3C003055-00: RNCC: 5 | RNVC: 9

15 Oct 1979

5340-14-230-7299
Handwheel

142307299
GSM137-001F12-12N1: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-351-1098
Retaining Strap

143511098
6817216-000: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-423-0978
Webbing Strap

144230978
160G712122-14: RNCC: 3 | RNVC: 2

31 Mar 1988

5340-14-395-6617
Anchor Strap

143956617
785-366: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-549-8713
Mounting Bracket

145498713
2093193-001: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-501-0046
Handle Grip

145010046
10020151: RNCC: 3 | RNVC: 2
F300 0T 025 0339: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-439-2920
Cover Strip

144392920
DA2C261035047: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-316-9639
Bow Handle

143169639
NO PRIMARY REF14-316-9639: RNCC: 3 | RNVC: 2
H3: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-338-4528
Angle Bracket

143384528
330A65-4432-20: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-524-4859
Mounting Bracket

145244859
ST159-2M761-2P241: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-360-2875
Loop Clamp

143602875
AM453-162: RNCC: 3 | RNVC: 2
524-61-019: RNCC: 5 | RNVC: 2
524-61-019: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-495-2206
Mounting Plate

144952206
NO PRIMARY REF14-495-2206: RNCC: 3 | RNVC: 2
02962192: RNCC: 5 | RNVC: 9
F300 0T 018 6589: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-230-7323
Handwheel

142307323
GSM137-001F16-3C1: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-354-7630
Rod End Clevis

143547630
55292: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-359-1754
Access Cover

143591754
853921: RNCC: 3 | RNVC: 2
853921: RNCC: 5 | RNVC: 2
853921: RNCC: 5 | RNVC: 9

7 Sep 1979

5340-14-441-6394
Rod End Clevis

144416394
RK4S6JF175: RNCC: 3 | RNVC: 2

5 Sep 1990

5340-14-439-1938
Plug Button

144391938
16006812: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-479-2710
Locking Stay

144792710
HD3C: RNCC: 3 | RNVC: 2
KK15M2201C/REP513: RNCC: 5 | RNVC: 2

3 Jan 1996

5340-14-294-1298
Retaining Band

142941298
353417E: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-458-0058
Webbing Strap

144580058
332392: RNCC: 3 | RNVC: 2
332392: RNCC: 5 | RNVC: 9

2 Oct 1992

5340-14-382-4212
Retaining Strap

143824212
224944: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-234-4366
Angle Bracket

142344366
NO PRIMARY REF14-234-4366: RNCC: 3 | RNVC: 2
TB1904EQUERREBASDECHEVR0N: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-376-4515
Mounting Plate

143764515
16788394: RNCC: 3 | RNVC: 2
16788394: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-207-5426
Access Cover

142075426
0604243100: RNCC: 3 | RNVC: 2
0604243100: RNCC: 3 | RNVC: 2
6042431: RNCC: 5 | RNVC: 2
0604243100: RNCC: 5 | RNVC: 9
6042431: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-444-7242
Anchor Strap

144447242
192267: RNCC: 3 | RNVC: 2
F300 0T 010 2456: RNCC: 6 | RNVC: 9

21 Jan 1991

5340-14-546-9667
Cover Strip

145469667
RA1B721325723A1N1: RNCC: 3 | RNVC: 2

12 Sep 2005

5340-14-412-5231
Retaining Strap

144125231
621185: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-14-323-8834
Bow Handle

143238834
1653A112: RNCC: 3 | RNVC: 2
1653A112: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-285-1317
Pipe Hanger

142851317
271660: RNCC: 3 | RNVC: 2
271660: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-507-6450
Access Cover

145076450
96183075: RNCC: 3 | RNVC: 2

7 Aug 1998

5340-14-297-7289
Rod End Clevis

142977289
GSM1697DET6: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-523-6647
Mounting Plate

145236647
H5220340: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-461-2703
Mending Plate

144612703
4771602700: RNCC: 3 | RNVC: 2
5045990: RNCC: 5 | RNVC: 9

3 Mar 1993

5340-14-540-3109
Access Cover

145403109
10670683000: RNCC: 3 | RNVC: 2

18 Mar 2004

5340-14-499-1157
Access Cover

144991157
F00144702: RNCC: 3 | RNVC: 2
F00144702: RNCC: 5 | RNVC: 9

29 Oct 1997

5340-14-363-9408
Retaining Clip

143639408
4600573: RNCC: 3 | RNVC: 2
4600573: RNCC: 5 | RNVC: 9

7 Aug 1980

5340-14-521-1569
Access Cover

145211569
F1264211: RNCC: 3 | RNVC: 2
F1264211: RNCC: 5 | RNVC: 2

12 Jul 2000

5340-14-276-2166
Access Cover

142762166
A27487: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-250-8499
Bumper

142508499
0000608306: RNCC: 3 | RNVC: 2
ZB9608306A: RNCC: 5 | RNVC: 2
0000608306: RNCC: 5 | RNVC: 9
608306: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-414-5497
Access Cover

144145497
TH20B902: RNCC: 3 | RNVC: 2

11 Feb 1987

5340-14-545-6900
Angle Bracket

145456900
RA1A703566713N1: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-451-2311
Pipe Hanger

144512311
PM1A726122060: RNCC: 3 | RNVC: 2
PM1A726122060: RNCC: 5 | RNVC: 2

6 Nov 1991

5340-14-406-0378
Mounting Bracket

144060378
M4Z6184902601: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-423-9475
Retaining Strap

144239475
535884: RNCC: 3 | RNVC: 2

5 May 1988

5340-14-454-4510
Buckle

144544510
30106102: RNCC: 3 | RNVC: 9

2 Apr 1992

5340-14-513-0560
Webbing Strap

145130560
009576035P: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-14-508-5287
Retaining Strap

145085287
10496220: RNCC: 3 | RNVC: 2

16 Sep 1998

5340-14-550-9058
Section Block Clamp

145509058
RA1B701924111: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-512-8684
Loop Clamp

145128684
476193: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-471-5061
Runner

144715061
7519393: RNCC: 3 | RNVC: 2
5010059183: RNCC: 5 | RNVC: 2
0C07519393: RNCC: 5 | RNVC: 2

31 Aug 1994

5340-14-550-9183
Angle Bracket

145509183
RA1B701964271: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-477-2291
Mounting Bracket

144772291
021170R01: RNCC: 3 | RNVC: 2

2 Aug 1995

5340-14-397-2847
Angle Bracket

143972847
79112980: RNCC: 3 | RNVC: 2
79112980: RNCC: 5 | RNVC: 9

1 Dec 1984

5340-14-521-9832
Synchro Clamp

145219832
01AT1140: RNCC: 3 | RNVC: 2

27 Sep 2000

5340-14-571-1421
Utility Access Door

145711421
08526: RNCC: 3 | RNVC: 2
3303430085263: RNCC: 5 | RNVC: 2

22 Feb 2012

5340-14-493-3125
Synchro Clamp

144933125
601622: RNCC: 3 | RNVC: 2
F300 0T 012 1730: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-474-2939
Mounting Plate

144742939
20712074: RNCC: 3 | RNVC: 2

8 Feb 1995

5340-14-463-8687
Blank Panel

144638687
0185101040: RNCC: 3 | RNVC: 2
89414670: RNCC: 5 | RNVC: 2

30 Jun 1993

5340-14-512-8967
Mounting Plate

145128967
551540: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-429-8925
Pipe Hanger

144298925
9136289106: RNCC: 3 | RNVC: 2

15 Feb 1989

5340-14-411-5509
Runner

144115509
192740: RNCC: 3 | RNVC: 2
CO740: RNCC: 5 | RNVC: 2

21 Aug 1986

5340-14-555-7137
Loop Clamp

145557137
11317009031: RNCC: 3 | RNVC: 2

10 Dec 2007

5340-14-512-8987
Bow Handle

145128987
551566: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-477-0435
Shelf Bracket

144770435
46098104: RNCC: 3 | RNVC: 2

19 Jul 1995

5340-14-542-2328
Doorstop

145422328
704225308: RNCC: 3 | RNVC: 2
704225308: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-332-2248
Retaining Strap

143322248
193387: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-457-5104
Webbing Strap

144575104
646053: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-448-0833
Angle Bracket

144480833
PM1A237282005: RNCC: 3 | RNVC: 2
PM1A237282005: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-222-3026
Angle Bracket

142223026
0000137696: RNCC: 3 | RNVC: 2
137696: RNCC: 5 | RNVC: 9
0000137696: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-542-2597
Mounting Bracket

145422597
704225208: RNCC: 3 | RNVC: 2
704225208: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-521-0471
Loop Clamp

145210471
91769792: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-14-416-6887
Access Cover

144166887
413002050101: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-530-0749
Webbing Strap

145300749
010323050P: RNCC: 3 | RNVC: 2

6 May 2002

5340-14-532-5486
Access Cover

145325486
4692293A: RNCC: 3 | RNVC: 2

13 Nov 2002

5340-14-468-1547
Synchro Clamp

144681547
DA4C138000121: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-496-8801
Mounting Bracket

144968801
11897801: RNCC: 3 | RNVC: 2
F300 0T 022 2293: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-544-3091
Mounting Bracket

145443091
093130D: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-14-534-2869
Rigid Caster

145342869
10650238: RNCC: 3 | RNVC: 2

19 Mar 2003

5340-14-517-5769
Shelf Bracket

145175769
RA1M701201105: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-470-0263
Mounting Plate

144700263
10064883: RNCC: 3 | RNVC: 2

25 May 1994

5340-14-544-3523
Mounting Bracket

145443523
AMPC GENE E224305: RNCC: 3 | RNVC: 2

24 Jan 2005

5340-14-518-9724
Mounting Bracket

145189724
707529: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-509-1063
Mounting Plate

145091063
10360001: RNCC: 3 | RNVC: 2
10360001: RNCC: 3 | RNVC: 9

21 Oct 1998

5340-14-352-7274
Angle Bracket

143527274
573899146: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-353-1455
Angle Bracket

143531455
160105: RNCC: 3 | RNVC: 2
160105: RNCC: 5 | RNVC: 2

8 Dec 1978

5340-14-351-0083
Retaining Strap

143510083
214486: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-500-6405
Section Block Clamp

145006405
E64209000008: RNCC: 3 | RNVC: 2
F300 0T 024 6591: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-405-4376
Rim Lock Set

144054376
002905: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-349-3342
Lock-Release Lever

143493342
205403: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-480-0116
Angle Bracket

144800116
1976114: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-366-2812
Pipe Hanger

143662812
A11A221172211N1: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-400-0006
Mounting Plate

144000006
606656: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-464-5776
Casement Fastener

144645776
91: RNCC: 3 | RNVC: 9

11 Aug 1993

5340-14-312-9052
Mending Plate

143129052
541177: RNCC: 3 | RNVC: 9

1 Jan 1974

5340-14-397-1257
Chassis Base

143971257
20320999: RNCC: 3 | RNVC: 2
20320999: RNCC: 5 | RNVC: 9

1 Dec 1984

5340-14-382-4851
Mounting Plate

143824851
16932342: RNCC: 3 | RNVC: 2
16932342: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-548-5992
Angle Bracket

145485992
RA1B702206509: RNCC: 3 | RNVC: 2

26 Jan 2006

5340-14-266-1474
Mending Plate

142661474
26241025: RNCC: 3 | RNVC: 2
C241025: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-409-8003
Anchor Strap

144098003
M397-02-10-46-54: RNCC: 3 | RNVC: 2
453-80326-000: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-290-6970
Loop Clamp

142906970
3605-11-3: RNCC: 3 | RNVC: 2
3605-11-3IS0: RNCC: 3 | RNVC: 2
3605-11-3IS0: RNCC: 3 | RNVC: 9
3605-11-3IS0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-480-3319
Access Cover

144803319
45155305: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-515-9067
Access Cover

145159067
46138501: RNCC: 3 | RNVC: 2

26 Aug 1999

5340-14-361-7270
Locking Stay

143617270
0395025800: RNCC: 3 | RNVC: 2
0395025800: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-14-522-1099
Access Cover

145221099
2189010: RNCC: 3 | RNVC: 2
2189010: RNCC: 5 | RNVC: 2

4 Oct 2000

5340-14-453-0027
Access Cover

144530027
1190142000000: RNCC: 3 | RNVC: 2
119014200: RNCC: 3 | RNVC: 2
119014200: RNCC: 5 | RNVC: 2

29 Jan 1992

5340-14-472-2099
Webbing Strap

144722099
1073704S00: RNCC: 3 | RNVC: 2

12 Oct 1994

5340-14-504-4145
Mounting Bracket

145044145
50060254: RNCC: 3 | RNVC: 2

16 Feb 1998

5340-14-211-0772
Access Cover

142110772
16660: RNCC: 3 | RNVC: 2
00070000: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-522-3481
Mounting Plate

145223481
TS142793: RNCC: 3 | RNVC: 2

23 Oct 2000

5340-14-413-7130
Synchro Clamp

144137130
5483891: RNCC: 3 | RNVC: 2
524-32-006: RNCC: 5 | RNVC: 2
524-32-006: RNCC: 5 | RNVC: 9
52432006: RNCC: 5 | RNVC: 9

15 Jan 1987

5340-14-478-1056
Shelf Bracket

144781056
RA1M240000340: RNCC: 3 | RNVC: 2

11 Oct 1995

5340-14-480-2382
Rod End Clevis

144802382
29665534: RNCC: 3 | RNVC: 2
29665534: RNCC: 5 | RNVC: 9

28 Feb 1996

5340-14-478-1045
Rod End Clevis

144781045
RA1M239526111: RNCC: 3 | RNVC: 2

11 Oct 1995

5340-14-389-9645
Access Cover

143899645
381673: RNCC: 3 | RNVC: 2
381673: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-14-472-6349
Access Cover

144726349
29050885: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-14-530-0003
Access Cover

145300003
351119248731: RNCC: 3 | RNVC: 2

26 Apr 2002

5340-14-545-6843
Angle Bracket

145456843
RA1A703750147N1: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-475-9876
Access Cover

144759876
4640297B: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-441-1432
Access Cover

144411432
16629047: RNCC: 3 | RNVC: 2
16629047: RNCC: 5 | RNVC: 9

22 Aug 1990

5340-14-461-8944
Rod End Clevis

144618944
T700A2730096100: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-321-0095
Access Cover

143210095
15437728: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-303-3382
Rod End Clevis

143033382
160199: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-359-7260
Access Cover

143597260
BAZ3259: RNCC: 3 | RNVC: 2

15 Oct 1979

5340-14-513-8580
Access Cover

145138580
642472: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-420-4906
Webbing Strap

144204906
EL47-2: RNCC: 3 | RNVC: 2

10 Dec 1987

5340-14-359-8156
Access Cover

143598156
701818: RNCC: 3 | RNVC: 2

15 Oct 1979

5340-14-501-0705
Access Cover

145010705
162212128: RNCC: 3 | RNVC: 2
F300 0T 025 1043: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-526-9889
Access Cover

145269889
T257A0006175: RNCC: 3 | RNVC: 2

20 Sep 2001

5340-14-475-8713
Access Cover

144758713
1035043Y00: RNCC: 3 | RNVC: 2

10 May 1995

5340-14-520-2783
Access Cover

145202783
8743993: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-432-9392
Rod End Connector

144329392
234138: RNCC: 3 | RNVC: 2

4 Jul 1989

5340-14-420-6524
Access Cover

144206524
180200002: RNCC: 3 | RNVC: 2

16 Dec 1987

5340-14-476-7036
Access Cover

144767036
101160601720: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-14-438-4394
Access Cover

144384394
20252654: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-322-1203
Clamp Bolt Assembly

143221203
V3SD18102-2: RNCC: 3 | RNVC: 2
V3SD18102-2: RNCC: 5 | RNVC: 2
18102-2: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-506-4622
Access Cover

145064622
12030200: RNCC: 3 | RNVC: 2

29 Apr 1998

5340-14-530-8175
Lock Bolt

145308175
S-MCL2T: RNCC: 3 | RNVC: 2
SYB5436: RNCC: 5 | RNVC: 2

8 Jul 2002

5340-14-482-7211
Mortise Latch

144827211
1101680D00: RNCC: 3 | RNVC: 2

25 Jul 1996

5340-14-382-3831
Flush Catch Claw

143823831
BAZ94615: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-455-3739
Mounting Bracket

144553739
1060120: RNCC: 3 | RNVC: 2
1060120: RNCC: 5 | RNVC: 9
5044633: RNCC: 5 | RNVC: 9

21 May 1992

5340-14-516-1720
Mounting Bracket

145161720
14232: RNCC: 3 | RNVC: 2

14 Sep 1999

5340-14-357-5920
Clamping Catch

143575920
4144520ET4144522: RNCC: 3 | RNVC: 2

27 Jun 1979

5340-14-427-4050
Webbing Strap

144274050
R6162EC: RNCC: 2 | RNVC: 2
R6162EC: RNCC: 3 | RNVC: 2
R6162EC: RNCC: 5 | RNVC: 2

18 Oct 1988

5340-14-546-4755
Loop Clamp

145464755
01378708060: RNCC: 3 | RNVC: 2
5010552410: RNCC: 3 | RNVC: 2

6 Jul 2005

5340-14-422-4600
Retaining Strap

144224600
41258: RNCC: 3 | RNVC: 2

3 Mar 1988

5340-14-451-8106
Webbing Strap

144518106
103747: RNCC: 3 | RNVC: 2
89411386: RNCC: 5 | RNVC: 2

4 Dec 1991

5340-14-545-4273
Angle Bracket

145454273
RA1A701666843: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-489-3557
Threaded Rod End

144893557
NNP5340920018704: RNCC: 3 | RNVC: 2

9 Jul 1997

5340-14-382-3839
Rod End Clevis

143823839
BAZ94627: RNCC: 3 | RNVC: 2
30-0901: RNCC: 5 | RNVC: 2

17 Feb 1983

5340-14-352-7237
Angle Bracket

143527237
573898242: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-464-3232
Plate Spacer

144643232
5110704: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-514-5376
Mounting Plate

145145376
EB047-32-100: RNCC: 3 | RNVC: 2
EB047-32-100: RNCC: 5 | RNVC: 2

26 May 1999

5340-14-484-0179
Bow Handle

144840179
MECUM0330-12: RNCC: 3 | RNVC: 2

17 Oct 1996

5340-14-551-2480
Mounting Plate

145512480
1501022-CFRA: RNCC: 3 | RNVC: 2
1501022-CFRA: RNCC: 5 | RNVC: 2

7 Sep 2006

5340-14-475-0805
Mounting Plate

144750805
DM4-5026900: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-549-8151
Angle Bracket

145498151
970915-2: RNCC: 3 | RNVC: 2

15 May 2006

5340-14-526-4904
Mounting Plate

145264904
GA66821: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-483-5506
Mounting Bracket

144835506
46089947: RNCC: 3 | RNVC: 2

19 Sep 1996

5340-14-212-5399
Retaining Strap

142125399
35165: RNCC: 3 | RNVC: 9

1 Jan 1964

5340-14-449-3115
Plate Spacer

144493115
516A212: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-522-9741
Mounting Bracket

145229741
0319700020: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-14-544-5497
Door Handle

145445497
82088841000: RNCC: 3 | RNVC: 2

9 Feb 2005

5340-14-340-9889
Retaining Strap

143409889
TH20A1251: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-552-9593
Retaining Strap

145529593
712357: RNCC: 3 | RNVC: 2

19 Feb 2007

5340-14-381-3153
Access Cover

143813153
2206-441C508: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-477-7924
Pipe Hanger

144777924
000302: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-14-464-1789
Access Cover

144641789
29452367: RNCC: 3 | RNVC: 2

21 Jul 1993

5340-14-372-1156
Rod End Clevis

143721156
F183: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-472-0824
Handle Grip

144720824
1851NR: RNCC: 3 | RNVC: 2
1851: RNCC: 5 | RNVC: 2
91754742: RNCC: 5 | RNVC: 2

5 Oct 1994

5340-14-485-5412
Webbing Strap

144855412
15617784: RNCC: 3 | RNVC: 2

29 Jan 1997

5340-14-483-8010
Loop Clamp

144838010
1106588M00: RNCC: 3 | RNVC: 2

3 Oct 1996

5340-14-320-1450
Access Cover

143201450
108-15-27: RNCC: 3 | RNVC: 2
108-15-27: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-423-2005
Vent Plug

144232005
247282: RNCC: 3 | RNVC: 2

9 Apr 1988

5340-14-523-5299
Loop Clamp

145235299
VIS819: RNCC: 3 | RNVC: 2
239: RNCC: 5 | RNVC: 2

24 Jan 2001

5340-14-439-1012
Access Cover

144391012
0064872100: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-537-8166
Mounting Bracket

145378166
06800170: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-14-498-3164
Loop Clamp

144983164
91952652: RNCC: 3 | RNVC: 2
PAA73-10-013-01: RNCC: 3 | RNVC: 2
F300 0T 004 7829: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-517-7471
Pipe Hanger

145177471
TA5011G301: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-420-6014
Retaining Strap

144206014
2-17494: RNCC: 3 | RNVC: 2

16 Dec 1987

5340-14-523-2376
Cover Strip

145232376
RA1M292450361: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-516-8556
Mounting Bracket

145168556
101162901011: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-14-421-3787
Mounting Plate

144213787
39145879: RNCC: 3 | RNVC: 2

14 Jan 1988

5340-14-531-1468
Mounting Bracket

145311468
TB3020108F461: RNCC: 3 | RNVC: 2

24 Jul 2002

5340-14-458-8901
Runner

144588901
401274: RNCC: 3 | RNVC: 2
BGE401274: RNCC: 5 | RNVC: 2

5 Nov 1992

5340-14-446-1423
Rope Cleat

144461423
39959465: RNCC: 3 | RNVC: 2
39959465: RNCC: 5 | RNVC: 9

6 Mar 1991

5340-14-505-0213
Mounting Plate

145050213
5010116659: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-531-2574
Loop Clamp

145312574
53313110012: RNCC: 3 | RNVC: 2

6 Aug 2002

5340-14-540-4396
Mounting Bracket

145404396
F00127317: RNCC: 3 | RNVC: 2
F00127317: RNCC: 5 | RNVC: 9

25 Mar 2004

5340-14-518-1130
Bumper

145181130
5000666106: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-031-8379
Mending Plate

140318379
VDP1053: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-382-4895
Tubular Fairlead

143824895
16497783: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-517-2004
Arched Cushion

145172004
POT02PD000013: RNCC: 3 | RNVC: 2

17 Nov 1999

5340-14-362-2545
Angle Bracket

143622545
A11A211160070: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-555-4737
Retaining Strap

145554737
5010616901: RNCC: 3 | RNVC: 2

20 Nov 2007

5340-14-346-7224
Block Clamp

143467224
A11A704111130: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-500-7309
Mounting Plate

145007309
10287559: RNCC: 3 | RNVC: 2
F300 0T 024 7504: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-352-5640
Pipe Hanger

143525640
A11A522320430: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-214-7241
Retaining Strap

142147241
13768: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-506-8213
Protection Bellows

145068213
MTFLSH2011100A: RNCC: 3 | RNVC: 2

25 May 1998

5340-14-549-9218
Mounting Bracket

145499218
812A-2: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-355-7897
Runner

143557897
100704: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-554-1687
Mounting Bracket

145541687
CCN301-810-611A2: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-328-7944
Synchro Clamp

143287944
0249977000: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-442-1700
Access Cover

144421700
20292324: RNCC: 3 | RNVC: 2

3 Oct 1990

5340-14-550-9100
Cover Strip

145509100
RA1B701926555A1: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-470-6501
Mounting Bracket

144706501
GA61469: RNCC: 3 | RNVC: 2

29 Jun 1994

5340-14-469-6433
Retaining Strap

144696433
PM1A595100010: RNCC: 3 | RNVC: 2
PM1A595100010: RNCC: 5 | RNVC: 2

4 May 1994

5340-14-550-4745
Mounting Plate

145504745
RA1B260961141N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-408-7068
Loop Clamp

144087068
TSV200-30-05: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-509-1179
Mounting Plate

145091179
19203212: RNCC: 3 | RNVC: 2
40000-11: RNCC: 5 | RNVC: 9

21 Oct 1998

5340-14-551-9118
Mounting Bracket

145519118
0026460: RNCC: 3 | RNVC: 2

8 Nov 2006

5340-14-468-6514
Arched Cushion

144686514
MAT169-0012F23DE21: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-14-502-8049
Retaining Clip

145028049
8T1891: RNCC: 3 | RNVC: 2

17 Dec 1997

Load More Results