What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 32 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 32 of 446

5340-14-535-5240
Mounting Bracket

145355240
355A62-5021-20: RNCC: 3 | RNVC: 2

31 May 2003

5340-14-421-1799
Cover Strip

144211799
FA1R210-251: RNCC: 3 | RNVC: 2

6 Jan 1988

5340-14-511-9128
Pawl Fastener

145119128
4FE642: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-14-529-5610
Mounting Bracket

145295610
330A68-1708-00: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-520-7718
Flush Catch Claw

145207718
T524A2001300: RNCC: 3 | RNVC: 2

14 Jun 2000

5340-14-542-0562
Loop Clamp

145420562
25292109-086: RNCC: 3 | RNVC: 2
502104001006A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-533-2986
Loop Clamp

145332986
167-060-013: RNCC: 3 | RNVC: 2
CAE00979: RNCC: 5 | RNVC: 2

29 Jan 2003

5340-14-222-6723
Corner Brace

142226723
15492-04: RNCC: 3 | RNVC: 9

1 Jan 1966

5340-14-468-6504
Arched Cushion

144686504
MAT169-0012F23DE14: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-14-519-3109
Mounting Bracket

145193109
332V21-1029-26: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-307-5029
Loop Clamp

143075029
E4M703-60-890: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-551-1708
Mounting Bracket

145511708
341A32-1108-01: RNCC: 3 | RNVC: 2

31 Aug 2006

5340-14-482-9354
Pipe Hanger

144829354
78732-060-043: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-495-4944
Handwheel

144954944
ST406M72P124E12: RNCC: 3 | RNVC: 2
F300 0T 019 3500: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-449-4890
Quick Release Pin

144494890
51453C12R100NW: RNCC: 3 | RNVC: 2

21 Aug 1991

5340-14-357-9454
Angle Bracket

143579454
389194: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-14-472-1996
Webbing Strap

144721996
DAV66177: RNCC: 3 | RNVC: 2

12 Oct 1994

5340-14-345-0483
Buckle

143450483
154053: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-440-9001
Retaining Bail

144409001
9540112-2: RNCC: 3 | RNVC: 2

8 Aug 1990

5340-14-314-4729
Flush Catch Claw

143144729
156760: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-504-9211
Angle Bracket

145049211
51204: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-349-8676
Webbing Strap

143498676
1000231: RNCC: 3 | RNVC: 2
2000080-2-5: RNCC: 5 | RNVC: 2

14 Jun 1978

5340-14-553-4554
Pipe Hanger

145534554
DA1N202430026: RNCC: 3 | RNVC: 2

4 Apr 2007

5340-14-435-1061
Mounting Bracket

144351061
16559376: RNCC: 3 | RNVC: 2
16559376: RNCC: 5 | RNVC: 9

18 Oct 1989

5340-14-350-4105
Rod End Connector

143504105
214253: RNCC: 3 | RNVC: 2
MAF0001003365: RNCC: 6 | RNVC: 9

12 Jul 1978

5340-14-532-7315
Pawl Fastener

145327315
1000-U403: RNCC: 3 | RNVC: 2

4 Dec 2002

5340-14-431-8027
Loop Clamp

144318027
521231050251: RNCC: 3 | RNVC: 2
115GE25: RNCC: 5 | RNVC: 2

10 May 1989

5340-14-365-7499
Bumper

143657499
3117B2: RNCC: 3 | RNVC: 9
1-09-11033: RNCC: 5 | RNVC: 9

8 Oct 1980

5340-14-339-7775
Bow Handle

143397775
15156032: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-500-6233
Section Block Clamp

145006233
E64009998133: RNCC: 3 | RNVC: 2
F300 0T 024 6417: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-536-2368
Door Handle

145362368
1123U36-6: RNCC: 3 | RNVC: 2
SC086626: RNCC: 5 | RNVC: 9

22 Jul 2003

5340-14-314-3724
Flush Lock

143143724
26253088: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-442-1740
Butt Hinge

144421740
20294152: RNCC: 3 | RNVC: 2

3 Oct 1990

5340-14-555-6958
Shelf Bracket

145556958
M-P-10045: RNCC: 3 | RNVC: 2

7 Dec 2007

5340-14-485-6419
Mounting Plate

144856419
45155577: RNCC: 3 | RNVC: 2
45155577: RNCC: 5 | RNVC: 2

6 Feb 1997

5340-14-365-1848
Rod End Connector

143651848
194651: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-383-3096
Mending Plate

143833096
26953: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-460-0761
Rod End Connector

144600761
PM1A725374403: RNCC: 3 | RNVC: 2
PM1A725374403: RNCC: 5 | RNVC: 2

7 Jan 1993

5340-14-504-9341
Casement Fastener

145049341
FERME94315X00: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-341-0852
Rod End Connector

143410852
16411011: RNCC: 3 | RNVC: 2
16411011: RNCC: 3 | RNVC: 9

16 Mar 1977

5340-14-031-8137
Access Cover

140318137
5477066-405B: RNCC: 3 | RNVC: 2
5418710X: RNCC: 5 | RNVC: 2

5 Jul 1980

5340-14-203-0844
Mounting Plate

142030844
3130S50-40-110: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-502-6370
Mounting Bracket

145026370
M399-02331: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-413-3430
Anchor Strap

144133430
536-441-013REP12: RNCC: 3 | RNVC: 2
536-441-012REP12: RNCC: 5 | RNVC: 2

3 Dec 1986

5340-14-490-1775
Mounting Plate

144901775
5302357.02 46.01 REP B: RNCC: 3 | RNVC: 2
5302357-02 46-01-REP B: RNCC: 5 | RNVC: 2
5302357-02 46-01REPB: RNCC: 5 | RNVC: 2
F300 0T 024 2520: RNCC: 6 | RNVC: 9

17 Sep 1997

5340-14-410-2379
Swivel Caster

144102379
HP6BP160-23R: RNCC: 3 | RNVC: 2
91517745: RNCC: 5 | RNVC: 2

18 Jun 1986

5340-14-389-4415
Bumper

143894415
365A31-2142-20: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-512-5540
Section Block Clamp

145125540
F762-32-02: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-415-0980
Access Cover

144150980
1424019: RNCC: 3 | RNVC: 2
1424019: RNCC: 5 | RNVC: 2
3-062-2/21100.03: RNCC: 5 | RNVC: 9
3-062-2/21100.03: RNCC: 5 | RNVC: 9

26 Mar 1987

5340-14-510-8728
Mounting Bracket

145108728
EA1M703-30-870: RNCC: 3 | RNVC: 2
85-695-2658: RNCC: 6 | RNVC: 9

18 Nov 1998

5340-14-503-5969
Bridge Clamp

145035969
NO PRIMARY REF14-503-5969: RNCC: 3 | RNVC: 2
41B7787650: RNCC: 5 | RNVC: 9
41B7787650: RNCC: 5 | RNVC: 9

21 Jan 1998

5340-14-260-0878
Retaining Clip

142600878
321A82-0114-20: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-389-7632
Butt Hinge

143897632
71-04497-000: RNCC: 3 | RNVC: 2
71-04-497-000: RNCC: 5 | RNVC: 2
85-692-4816: RNCC: 6 | RNVC: 9

20 Dec 1983

5340-14-527-1112
Rod End Clevis

145271112
160-888063-03: RNCC: 3 | RNVC: 2

3 Oct 2001

5340-14-310-2487
Retaining Strap

143102487
773-417-023DET7: RNCC: 3 | RNVC: 2
773-415-023DET7: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-351-1497
Anchor Strap

143511497
AZ451-65: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-552-3740
Mounting Bracket

145523740
216897-0: RNCC: 3 | RNVC: 2

15 Dec 2006

5340-14-236-8672
Bumper

142368672
10-11602: RNCC: 3 | RNVC: 2
54029-1456: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-415-1158
Cable Retractor

144151158
1980-63-1G: RNCC: 3 | RNVC: 2
1979AN63GAAA: RNCC: 5 | RNVC: 2

1 Apr 1987

5340-14-406-8198
Access Cover

144068198
676-41113-00-94: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-389-4077
Quick Release Pin

143894077
10-201-190: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-315-7433
Angle Bracket

143157433
3160S73-51-335: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-434-4796
Snap Hook

144344796
TSV200-10033: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-557-0526
Utility Access Door

145570526
271519830: RNCC: 3 | RNVC: 2
27151983-0: RNCC: 3 | RNVC: 9
271519830: RNCC: 5 | RNVC: 9

5 May 2008

5340-14-464-9709
Pad Eye

144649709
365A62-8115-26: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-519-1981
Strap Fastener Loop

145191981
1SH41607501: RNCC: 3 | RNVC: 2

14 Mar 2000

5340-14-448-6775
Cushioning Pad

144486775
1700-42: RNCC: 3 | RNVC: 2

4 Jul 1991

5340-14-362-0099
Loop Clamp

143620099
925222: RNCC: 3 | RNVC: 2
925222: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-14-395-7196
Mounting Bracket

143957196
RT5546-6: RNCC: 3 | RNVC: 2

17 Dec 2002

5340-14-332-9411
Retaining Strap

143329411
193370: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-549-2941
Mounting Bracket

145492941
MB4576F01: RNCC: 3 | RNVC: 2

20 Mar 2006

5340-14-375-9223
Angle Bracket

143759223
264-8: RNCC: 3 | RNVC: 2

30 Mar 1982

5340-14-382-9152
Retaining Strap

143829152
148195-7: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-523-2398
Retaining Strap

145232398
RA1M569210002: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-545-7388
Blank Panel

145457388
F1264712: RNCC: 3 | RNVC: 2

4 May 2005

5340-14-514-1827
Access Cover

145141827
15272-7412-0: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-14-232-0709
Loop Clamp

142320709
73511: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-263-4156
Retaining Strap

142634156
R403778: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-332-9395
Retaining Strap

143329395
193516: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-502-3626
Mounting Bracket

145023626
4710-3: RNCC: 3 | RNVC: 2
9520011604: RNCC: 5 | RNVC: 2
4710-3: RNCC: 5 | RNVC: 9

9 Dec 1997

5340-14-534-5382
Angle Bracket

145345382
RA1M704754381N1: RNCC: 3 | RNVC: 2

26 Mar 2003

5340-14-553-9555
Blank Panel

145539555
82099133000: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-14-515-6109
Runner

145156109
P23010199: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-528-8851
Mounting Bracket

145288851
SAMD E 41165 REP 7: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-14-458-7355
Arched Cushion

144587355
MAT169-0012F21DE35: RNCC: 3 | RNVC: 2

29 Oct 1992

5340-14-459-6664
Arched Cushion

144596664
MAT169-0012F19DE25: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-482-4180
Angle Bracket

144824180
78704-60-050C: RNCC: 3 | RNVC: 2

11 Jul 1996

5340-14-450-2571
Clamping Catch

144502571
GOD.534-BR: RNCC: 3 | RNVC: 2
G0D534BR: RNCC: 5 | RNVC: 2
GOD534BR: RNCC: 5 | RNVC: 2

25 Sep 1991

5340-14-474-2184
Pipe Hanger

144742184
VIP-153N: RNCC: 3 | RNVC: 2

1 Feb 1995

5340-14-402-7678
Angle Bracket

144027678
9760-81: RNCC: 3 | RNVC: 9

19 Jul 1985

5340-14-360-7020
Access Cover

143607020
662-81362-00: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-514-4775
Shelf Bracket

145144775
IF-192-0543: RNCC: 3 | RNVC: 9
02022-10-00-001: RNCC: 5 | RNVC: 2

26 May 1999

5340-14-506-9453
Mounting Bracket

145069453
452-12805-010: RNCC: 3 | RNVC: 2
452-12805-010: RNCC: 5 | RNVC: 2

27 May 1998

5340-14-469-9792
Mounting Plate

144699792
015-45-240: RNCC: 3 | RNVC: 2

24 May 1994

5340-14-419-2383
Angle Bracket

144192383
7251-41: RNCC: 3 | RNVC: 2
9407252490: RNCC: 5 | RNVC: 2
9223349780: RNCC: 5 | RNVC: 2
7252-49: RNCC: 5 | RNVC: 2
9223349780: RNCC: 5 | RNVC: 2
9407251410: RNCC: 5 | RNVC: 2

16 Oct 1987

5340-14-502-9891
Mounting Bracket

145029891
332A21-1141-03: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-444-0858
Retaining Strap

144440858
955201820: RNCC: 3 | RNVC: 2
955222-018BGL: RNCC: 5 | RNVC: 9

18 Dec 1990

5340-14-409-9460
Bow Handle

144099460
8205-13: RNCC: 3 | RNVC: 2
9222066080: RNCC: 5 | RNVC: 2
9222066080: RNCC: 5 | RNVC: 2

4 Jun 1986

5340-14-244-5650
Mending Plate

142445650
NO PRIMARY REF14-244-5650: RNCC: 3 | RNVC: 2
Z20400: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-269-4297
Mortise Bolt

142694297
NO PRIMARY REF14-269-4297: RNCC: 3 | RNVC: 2
234-42BT38F0UGA: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-390-1322
Catch Strike

143901322
366A25-1023-02: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-307-2434
Catch Strike

143072434
3130S28-00-031: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-397-4411
Catch Strike

143974411
AC.143-IZ: RNCC: 3 | RNVC: 2
AC143IZ: RNCC: 3 | RNVC: 2
3324011: RNCC: 5 | RNVC: 2

14 Dec 1984

5340-14-366-6671
Barrel Bolt

143666671
262-20-22734-21: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-368-3732
Catch Strike

143683732
F116184: RNCC: 3 | RNVC: 2
89254984: RNCC: 5 | RNVC: 2
F116184: RNCC: 6 | RNVC: 9

20 Feb 1981

5340-14-261-1820
Spring Window Bolt

142611820
NO PRIMARY REF14-261-1820: RNCC: 3 | RNVC: 2
MA2-04-06-00: RNCC: 5 | RNVC: 2
MA2-04-06-00: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-320-4367
Catch Strike

143204367
AC121BR: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-404-6390
Catch Strike

144046390
AC.103-AL: RNCC: 3 | RNVC: 2
AC103AL: RNCC: 5 | RNVC: 2
50692: RNCC: 5 | RNVC: 9

20 Nov 1985

5340-14-431-2597
Catch Strike

144312597
332A22-1412-30: RNCC: 3 | RNVC: 2
F300 0T 009 8491: RNCC: 5 | RNVC: 9

12 Apr 1989

5340-14-346-1614
Access Cover

143461614
T70-9: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-355-8698
Loop Clamp

143558698
7700542746: RNCC: 3 | RNVC: 2

5 Apr 1979

5340-14-258-8165
Retaining Band

142588165
2598S: RNCC: 3 | RNVC: 9
24000220: RNCC: 5 | RNVC: 9
24000220P: RNCC: 5 | RNVC: 9
2598: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-439-9916
Webbing Strap

144399916
96117173: RNCC: 3 | RNVC: 2

29 Jun 1990

5340-14-524-8838
Bridge Clamp

145248838
60805: RNCC: 3 | RNVC: 2

25 Apr 2001

5340-14-442-9973
Angle Bracket

144429973
56205-986-1: RNCC: 3 | RNVC: 9

7 Nov 1990

5340-14-297-4582
Friction Catch

142974582
4516LAITBR0NZCAD: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-337-7886
Retaining Strap

143377886
2-81449: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-444-8746
Pad Eye

144448746
TB2020203E: RNCC: 3 | RNVC: 2
TB2020203: RNCC: 5 | RNVC: 9

28 Jan 1991

5340-14-500-4523
Mounting Plate

145004523
D63206000003: RNCC: 3 | RNVC: 2
F300 0T 024 4692: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-561-6898
Utility Resilient Mount

145616898
Z183019: RNCC: 3 | RNVC: 2
18301900, REV B: RNCC: 5 | RNVC: 2
18301900, REV C: RNCC: 5 | RNVC: 2

20 Aug 2009

5340-14-336-2337
Loop Clamp

143362337
502-517-734-0: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-549-9706
Pin Removable Head

145499706
T327A1001217: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-549-3638
Bumper

145493638
FARD5 002 06 P 5548B01: RNCC: 3 | RNVC: 2

27 Mar 2006

5340-14-500-3495
Flush Catch Claw

145003495
C61301000006: RNCC: 3 | RNVC: 2
F300 0T 024 3586: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-414-9567
Plug Button

144149567
NFT5-4: RNCC: 3 | RNVC: 2
91649785: RNCC: 5 | RNVC: 2
ROLESCONF: RNCC: 5 | RNVC: 9

26 Mar 1987

5340-14-380-4653
Flush Catch Claw

143804653
535422: RNCC: 3 | RNVC: 2
00535422: RNCC: 5 | RNVC: 2

29 Nov 1982

5340-14-399-6621
Butt Hinge

143996621
M/P10311: RNCC: 3 | RNVC: 2
92E0119: RNCC: 5 | RNVC: 2

6 Mar 1985

5340-14-433-0036
Friction Catch

144330036
16887152: RNCC: 3 | RNVC: 2
16887152: RNCC: 3 | RNVC: 9

5 Jul 1989

5340-14-476-6842
Mounting Plate

144766842
0894703Q00: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-14-393-8962
Retaining Strap

143938962
366A84-0128-20: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-449-3085
Butt Hinge

144493085
PM1A216740115: RNCC: 3 | RNVC: 2
PM1A216740115: RNCC: 5 | RNVC: 2

7 Aug 1991

5340-14-452-8622
Mounting Bracket

144528622
73-051-022: RNCC: 3 | RNVC: 2

22 Jan 1992

5340-14-432-7337
Mounting Bracket

144327337
NO PRIMARY REF14-432-7337: RNCC: 3 | RNVC: 2
OU143482: RNCC: 5 | RNVC: 9
0U143482: RNCC: 5 | RNVC: 9

21 Jun 1989

5340-14-031-7470
Corner Brace

140317470
330A87-5075-30: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-526-4769
Pipe Hanger

145264769
78733-038-022A: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-454-0911
Loop Clamp

144540911
2920-50-00-07: RNCC: 3 | RNVC: 2
89472917: RNCC: 5 | RNVC: 2

19 Mar 1992

5340-14-522-8977
Bumper

145228977
365A38-1026-00: RNCC: 3 | RNVC: 2

6 Dec 2000

5340-14-351-2424
Rod End Connector

143512424
17AT20-13-14: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-351-9737
Slide Keeper

143519737
PR: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-497-8836
Mounting Plate

144978836
PN1005-1: RNCC: 3 | RNVC: 2

22 Oct 1997

5340-14-540-5763
Angle Bracket

145405763
D0009202: RNCC: 3 | RNVC: 2

7 Apr 2004

5340-14-300-3665
Mounting Plate

143003665
15145240: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-440-6510
Mounting Bracket

144406510
31750381: RNCC: 3 | RNVC: 9

18 Jul 1990

5340-14-472-1700
Mounting Bracket

144721700
S30-801: RNCC: 3 | RNVC: 2
S30-801: RNCC: 5 | RNVC: 2
S30-801: RNCC: 5 | RNVC: 9
F300 0T 014 6224: RNCC: 6 | RNVC: 9

12 Oct 1994

5340-14-300-0887
Angle Bracket

143000887
181039: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-501-0063
Mounting Plate

145010063
10046024: RNCC: 3 | RNVC: 2
F300 0T 025 0357: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-549-0842
Angle Bracket

145490842
RA1M705815110: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-306-7237
Bumper

143067237
466-7M14P5: RNCC: 3 | RNVC: 2
466-7M14P5: RNCC: 5 | RNVC: 2
462-9M14P5: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-512-2470
Mounting Plate

145122470
1105316N00: RNCC: 3 | RNVC: 2

9 Feb 1999

5340-14-541-5095
Mounting Bracket

145415095
1091138: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-539-9421
Case Corner

145399421
10 0003 0047: RNCC: 3 | RNVC: 2
10 0003 0047: RNCC: 5 | RNVC: 9
AA013785: RNCC: 6 | RNVC: 9

25 Feb 2004

5340-14-520-4418
Bumper

145204418
M45AA0101-576: RNCC: 3 | RNVC: 2
M45AA0101-576: RNCC: 5 | RNVC: 9

17 May 2000

5340-14-394-9467
Angle Bracket

143949467
20320433: RNCC: 3 | RNVC: 2
20320433: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-447-9713
Beam Gripping Clamp

144479713
NO PRIMARY REF14-447-9713: RNCC: 3 | RNVC: 2
SB4122A4: RNCC: 5 | RNVC: 9

12 Jun 1991

5340-14-438-4583
Catch Strike

144384583
332A22-1411-24: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-540-5721
Retaining Band

145405721
T341A1001701: RNCC: 3 | RNVC: 2

6 Apr 2004

5340-14-396-1541
Access Cover

143961541
NO PRIMARY REF14-396-1541: RNCC: 3 | RNVC: 2
P3H011218-00: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-348-6186
Angle Bracket

143486186
6238-22272: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-14-339-9730
Retaining Strap

143399730
SQ9-07-01-08: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-367-2789
Loop Clamp

143672789
J044NA: RNCC: 3 | RNVC: 2
13941805-2: RNCC: 5 | RNVC: 2
12230807-9: RNCC: 5 | RNVC: 2

11 Dec 1980

5340-14-533-6784
Mounting Bracket

145336784
169E230-02: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-14-549-9597
Mounting Bracket

145499597
169E741-00: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-555-0301
Mounting Bracket

145550301
FA5P4010 07 P 10560: RNCC: 3 | RNVC: 2

20 Sep 2007

5340-14-408-6973
Access Cover

144086973
R048-114-000A: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-212-7511
Access Cover

142127511
2845-13: RNCC: 3 | RNVC: 2
2845-13: RNCC: 8 | RNVC: 2

1 Jan 1964

5340-14-441-1929
Spring Holder

144411929
6314-26: RNCC: 3 | RNVC: 2
91501564: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-14-303-0679
Runner

143030679
301341T: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-031-1541
Pipe Hanger

140311541
VDP2166: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-357-1804
Quick Release Pin

143571804
620C12T35: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-536-0904
Mounting Bracket

145360904
3612T003: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-351-2007
Flush Catch Claw

143512007
206807: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-332-3413
Bow Handle

143323413
2310034461: RNCC: 3 | RNVC: 2
3610014: RNCC: 5 | RNVC: 2
RI3U: RNCC: 5 | RNVC: 2
RI3U: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-384-8281
Rod End Clevis

143848281
ST159-2M364P14: RNCC: 3 | RNVC: 2

2 Jun 1983

5340-14-236-0935
Pipe Hanger

142360935
160-61440-17: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-546-0730
Pad Eye

145460730
56506: RNCC: 3 | RNVC: 2

9 Jun 2005

5340-14-502-3625
Mounting Bracket

145023625
4610-3: RNCC: 3 | RNVC: 2
9520011603: RNCC: 5 | RNVC: 2
4610-3: RNCC: 5 | RNVC: 9

9 Dec 1997

5340-14-455-1280
Mounting Bracket

144551280
ST159-2M122P58A: RNCC: 3 | RNVC: 2
J05485-122-1000P058: RNCC: 3 | RNVC: 2
ST159-2M122P58: RNCC: 5 | RNVC: 2

1 May 1992

5340-14-421-2334
Mounting Plate

144212334
306093100: RNCC: 3 | RNVC: 2
136177: RNCC: 5 | RNVC: 2

11 Jan 1988

5340-14-543-9977
Pawl Fastener

145439977
FAB 2017: RNCC: 3 | RNVC: 2

22 Dec 2004

5340-14-459-6058
Synchro Clamp

144596058
20322631: RNCC: 3 | RNVC: 2
20322631: RNCC: 5 | RNVC: 9

10 Dec 1992

5340-14-340-3613
Pipe Hanger

143403613
M3E701-118: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-296-7820
Angle Bracket

142967820
3017961: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-496-1678
Mounting Plate

144961678
71400-6: RNCC: 3 | RNVC: 2
F300 0T 020 9817: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-282-5373
Access Hole Frame

142825373
40320-7: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-207-5816
Handwheel

142075816
NO PRIMARY REF14-207-5816: RNCC: 3 | RNVC: 2
5218890: RNCC: 5 | RNVC: 2
16261: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-324-0684
Rod End Clevis

143240684
264-1M361P57A: RNCC: 3 | RNVC: 9
PA264-1M361P57A: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-505-9613
Cover Strip

145059613
330A58-1300-63: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-14-490-2933
Mounting Bracket

144902933
J05085-02-0700P033: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-526-0756
Arched Cushion

145260756
E1M370530: RNCC: 3 | RNVC: 2
MAT169-0024F5FORTERAIDEUR: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-14-213-1510
Bridge Clamp

142131510
T863-56M1P22B: RNCC: 3 | RNVC: 2
T86356M1P22: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-476-0393
Key Blank

144760393
NO PRIMARY REF14-476-0393: RNCC: 3 | RNVC: 2
76907: RNCC: 5 | RNVC: 2
955: RNCC: 5 | RNVC: 9

17 May 1995

5340-14-040-5528
Door Hook

140405528
330A22-0487-01: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-464-0217
Mounting Bracket

144640217
2085-02-001: RNCC: 3 | RNVC: 2
89411565: RNCC: 5 | RNVC: 9

7 Jul 1993

5340-14-375-4712
Mounting Bracket

143754712
319A69-20-015: RNCC: 3 | RNVC: 2
319A-69-20-015: RNCC: 5 | RNVC: 2

26 Feb 1982

5340-14-485-0554
Mounting Bracket

144850554
332A11-0470-00: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-14-411-0677
Butt Hinge

144110677
N262-0505-50000-18: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-366-8683
Angle Bracket

143668683
330A22-2055-91: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-295-2826
Bow Handle

142952826
VDP0869: RNCC: 3 | RNVC: 2
VDPM01024: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-233-9104
Access Cover

142339104
2043-15: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-484-6740
Mounting Bracket

144846740
39406221: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-466-0365
Angle Bracket

144660365
7502-5282: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-14-535-9664
Rod End Connector

145359664
10278251: RNCC: 3 | RNVC: 2

2 Jul 2003

5340-14-542-2616
Mounting Plate

145422616
704273708: RNCC: 3 | RNVC: 2
704273708: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-547-1204
Loop Clamp

145471204
ZSQ156BC50 DIAM 6 A1W1LONG 15: RNCC: 3 | RNVC: 2

26 Sep 2005

5340-14-212-0834
Swivel Caster

142120834
11586: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-511-5847
Angle Bracket

145115847
D65756: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-503-6683
Bow Handle

145036683
10386544: RNCC: 3 | RNVC: 2

23 Jan 1998

5340-14-475-8725
Loop Clamp

144758725
50100018005: RNCC: 3 | RNVC: 2
201N5: RNCC: 5 | RNVC: 2
1063274T00: RNCC: 5 | RNVC: 2
201N5: RNCC: 5 | RNVC: 9

10 May 1995

5340-14-287-2344
Mending Plate

142872344
1000066: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-530-1218
Mounting Bracket

145301218
TB3020108F810: RNCC: 3 | RNVC: 2

14 May 2002

5340-14-392-9716
Butt Hinge

143929716
0000658535: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-421-1921
Webbing Strap

144211921
11420: RNCC: 3 | RNVC: 2

6 Jan 1988

5340-14-452-1848
Mounting Bracket

144521848
008170051P: RNCC: 3 | RNVC: 2

23 Dec 1991

5340-14-462-8115
Rigid Caster

144628115
34-12-52: RNCC: 3 | RNVC: 2

3 May 1993

5340-14-516-3240
Door Holder

145163240
1SH41598327: RNCC: 3 | RNVC: 2
8007783F00: RNCC: 5 | RNVC: 2

21 Sep 1999

5340-14-380-0547
Handwheel

143800547
2206-342B584: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-305-6264
Butt Hinge

143056264
40BC50X40: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-562-7086
Utility Access Door

145627086
82377527000: RNCC: 3 | RNVC: 2

16 Nov 2009

5340-14-475-7283
Loop Clamp

144757283
S305-8: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-14-304-3507
Loop Clamp

143043507
09108000150: RNCC: 3 | RNVC: 2
91080-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-554-6605
Mounting Plate

145546605
0249870340: RNCC: 3 | RNVC: 2

1 Aug 2007

5340-14-455-8070
Mounting Bracket

144558070
D52099-1: RNCC: 3 | RNVC: 2
D52099-1: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-338-7616
Retaining Strap

143387616
46402B: RNCC: 3 | RNVC: 9
2163: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-420-1563
Bow Handle

144201563
NO PRIMARY REF14-420-1563: RNCC: 3 | RNVC: 2
D10-13180D10-14443: RNCC: 5 | RNVC: 9

23 Nov 1987

5340-14-555-6217
Loop Clamp

145556217
78651RH18CG: RNCC: 1 | RNVC: 2
78651RH18CG: RNCC: 3 | RNVC: 2

3 Dec 2007

5340-14-338-7615
Retaining Strap

143387615
46402A: RNCC: 3 | RNVC: 9
2162: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-534-7062
Mounting Plate

145347062
10466699: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-366-8187
Mending Plate

143668187
970550: RNCC: 3 | RNVC: 2
970550: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-555-2596
Mounting Bracket

145552596
5000296400: RNCC: 3 | RNVC: 2

17 Oct 2007

5340-14-529-9593
Mounting Plate

145299593
1107334S00: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-14-509-6862
Loop Clamp

145096862
78647B106: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-459-2517
Section Block Clamp

144592517
F707-72-01: RNCC: 3 | RNVC: 2

19 Nov 1992

5340-14-495-6767
Access Cover

144956767
N74282-99: RNCC: 3 | RNVC: 2
F300 0T 019 6097: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-390-4084
Bumper

143904084
6825-2036: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-286-1776
Handwheel

142861776
RV11-55: RNCC: 3 | RNVC: 2
2400DET152: RNCC: 3 | RNVC: 2
70041438: RNCC: 3 | RNVC: 2
2400DET152: RNCC: 5 | RNVC: 9
70041438: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-438-4564
Doorstop

144384564
332A22-1376-06: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-533-7567
Mounting Plate

145337567
F1263357: RNCC: 3 | RNVC: 2

21 Feb 2003

5340-14-416-1869
Bumper

144161869
400607: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-530-0287
Mounting Bracket

145300287
10646997: RNCC: 3 | RNVC: 2

30 Apr 2002

5340-14-477-3584
Mounting Plate

144773584
84880400113519A: RNCC: 3 | RNVC: 2

22 Aug 1995

5340-14-547-5339
Angle Bracket

145475339
RA1M704826321: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-394-9175
Anchor Strap

143949175
20734995: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-555-4177
Loop Clamp

145554177
78651RH8CG: RNCC: 1 | RNVC: 2
78651RH8CG: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-14-520-4080
Rod End Clevis

145204080
564078G0006: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-532-5121
Mounting Bracket

145325121
10637291: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-14-524-6610
Mounting Bracket

145246610
504779: RNCC: 3 | RNVC: 2

3 Apr 2001

5340-14-402-5850
Rod End Clevis

144025850
401179: RNCC: 3 | RNVC: 2
BGE401179: RNCC: 5 | RNVC: 2

19 Jul 1985

5340-14-365-1333
Access Cover

143651333
C17604: RNCC: 3 | RNVC: 2
9375840203: RNCC: 5 | RNVC: 2

2 Sep 1980

5340-14-433-0000
Mounting Bracket

144330000
10270-248: RNCC: 3 | RNVC: 9
89408328: RNCC: 5 | RNVC: 2

5 Jul 1989

5340-14-519-2678
Access Cover

145192678
3511 192 03921: RNCC: 3 | RNVC: 2
61975445: RNCC: 5 | RNVC: 2

15 Mar 2000

5340-14-350-4169
Rod End Clevis

143504169
212692: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-361-1716
Anchor Strap

143611716
BAZ6009: RNCC: 3 | RNVC: 2
BAZ6009: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-473-7165
Mounting Bracket

144737165
LN327022F07: RNCC: 3 | RNVC: 2

10 Jan 1995

5340-14-309-9166
Luggage Handle

143099166
S418279: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-508-5624
Access Cover

145085624
4C340: RNCC: 3 | RNVC: 2

16 Sep 1998

5340-14-461-2922
Mounting Bracket

144612922
5000728947: RNCC: 3 | RNVC: 2
89287685: RNCC: 5 | RNVC: 2

3 Mar 1993

5340-14-499-1123
Mounting Plate

144991123
A09070399: RNCC: 3 | RNVC: 2
F00154732: RNCC: 3 | RNVC: 2
F00154732: RNCC: 5 | RNVC: 9
F300 0T 018 3096: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-377-2049
Access Door Hinge

143772049
NO PRIMARY REF14-377-2049: RNCC: 3 | RNVC: 2
70: RNCC: 5 | RNVC: 9

17 May 1982

5340-14-253-8882
Strap Hinge

142538882
LN331087-322121301: RNCC: 2 | RNVC: 2
LN331087-322121301: RNCC: 3 | RNVC: 2
32-212-13-01: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-501-2913
Mounting Plate

145012913
704.004.078: RNCC: 3 | RNVC: 2
704-004-078: RNCC: 3 | RNVC: 2
F300 0T 025 3322: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-502-2295
Angle Bracket

145022295
41MI90-01M1P263: RNCC: 3 | RNVC: 2

26 Nov 1997

5340-14-520-4419
Access Cover

145204419
M45AA0101-580: RNCC: 3 | RNVC: 2
M45AA0101-580: RNCC: 5 | RNVC: 9

17 May 2000

5340-14-556-0028
Mounting Bracket

145560028
574744: RNCC: 3 | RNVC: 2

21 Jan 2008

5340-14-461-2716
Mounting Bracket

144612716
4772920430: RNCC: 3 | RNVC: 2
5046042: RNCC: 5 | RNVC: 9

3 Mar 1993

5340-14-352-4393
Loop Clamp

143524393
620-854-237-0: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-467-4297
Mounting Bracket

144674297
160R742225-06: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-14-489-4829
Rod End Clevis

144894829
418594: RNCC: 3 | RNVC: 2
418594-001: RNCC: 5 | RNVC: 9

23 Jul 1997

5340-14-490-0638
Bow Handle

144900638
NO PRIMARY REF14-490-0638: RNCC: 3 | RNVC: 2
F1625178: RNCC: 5 | RNVC: 9
1625 178: RNCC: 5 | RNVC: 9

10 Sep 1997

5340-14-389-2159
Rod End Connector

143892159
BSC8PA103-15: RNCC: 3 | RNVC: 2
85-692-3826: RNCC: 6 | RNVC: 9

29 Nov 1983

5340-14-481-6919
Synchro Clamp

144816919
815-2-33-722: RNCC: 3 | RNVC: 2

23 May 1996

5340-14-481-0914
Pipe Hanger

144810914
78732-020-046B: RNCC: 3 | RNVC: 2

18 Apr 1996

5340-14-527-1047
Angle Bracket

145271047
21228437-00: RNCC: 3 | RNVC: 2
21228437-7: RNCC: 5 | RNVC: 2

3 Oct 2001

5340-14-507-5435
Handwheel

145075435
R40215-1-003-HM: RNCC: 3 | RNVC: 2

16 Jul 1998

5340-14-372-2608
Bail Handle

143722608
P0F307ZB: RNCC: 3 | RNVC: 2
POF.307-ZB: RNCC: 3 | RNVC: 2
1046404X00: RNCC: 5 | RNVC: 2

1 Sep 1981

5340-14-516-0212
Mounting Bracket

145160212
009843080P: RNCC: 3 | RNVC: 2

2 Sep 1999

5340-14-365-5566
Angle Bracket

143655566
A11B221172130: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-504-6335
Lock Bolt

145046335
F00189041: RNCC: 3 | RNVC: 2
F00189041: RNCC: 5 | RNVC: 9

25 Feb 1998

5340-14-530-4635
Bumper

145304635
330A87-3118-30: RNCC: 3 | RNVC: 2

12 Jun 2002

5340-14-438-6805
Plate Spacer

144386805
DHS756-132-31: RNCC: 3 | RNVC: 2

28 Mar 1990

5340-14-389-0618
Leaf Spring

143890618
TB30-09048-100: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-484-0403
Mounting Bracket

144840403
U3-15562-00-04-M5520: RNCC: 3 | RNVC: 2
89296345: RNCC: 5 | RNVC: 2
U3-15562-00-04: RNCC: 5 | RNVC: 2
U3-15562-00-04-M5520: RNCC: 5 | RNVC: 2
U3-15562-00-04-M5520: RNCC: 5 | RNVC: 9
U3-15562-00-04-M5520: RNCC: 5 | RNVC: 9

17 Oct 1996

5340-14-548-3864
Bow Handle

145483864
201724: RNCC: 3 | RNVC: 2

11 Jan 2006

5340-14-552-2002
Snap Hook

145522002
M71: RNCC: 3 | RNVC: 2

4 Dec 2006

5340-14-483-5201
Corner Brace

144835201
1097654F00: RNCC: 3 | RNVC: 2

18 Sep 1996

5340-14-426-6198
Shimmy Damper

144266198
7266004: RNCC: 3 | RNVC: 2

10 Sep 1988

5340-14-465-1007
Mounting Bracket

144651007
121-874-15-10-26: RNCC: 3 | RNVC: 2

14 Sep 1993

5340-14-502-9741
Angle Bracket

145029741
307-801-805-0: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-449-2470
Support Hook

144492470
NO PRIMARY REF14-449-2470: RNCC: 3 | RNVC: 2
239375: RNCC: 5 | RNVC: 2

7 Aug 1991

5340-14-519-2388
Expansion Plug

145192388
E29584A200AGT: RNCC: 2 | RNVC: 2
E29584-20A: RNCC: 3 | RNVC: 2
617625: RNCC: 5 | RNVC: 9

15 Mar 2000

5340-14-421-9291
Loop Clamp

144219291
5000655600: RNCC: 3 | RNVC: 2
89414511: RNCC: 5 | RNVC: 2

10 Feb 1988

5340-14-409-5198
Loop Clamp

144095198
511131050221: RNCC: 3 | RNVC: 2
35G22: RNCC: 5 | RNVC: 2
A0021-35G22: RNCC: 5 | RNVC: 2

28 May 1986

5340-14-517-7667
Mounting Bracket

145177667
009876035P: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-14-366-7698
Mounting Plate

143667698
122696: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-301-0084
Rod End Clevis

143010084
121E23-651-01-07: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-545-6016
Section Block Clamp

145456016
09101100320: RNCC: 3 | RNVC: 2

25 Apr 2005

5340-14-529-8405
Shelf Bracket

145298405
COU001552016320: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-424-5934
Mounting Plate

144245934
NO PRIMARY REF14-424-5934: RNCC: 3 | RNVC: 2
108584: RNCC: 5 | RNVC: 9

2 Jun 1988

5340-14-432-5068
Mending Plate

144325068
341A75-2025-20: RNCC: 3 | RNVC: 2

14 Jun 1989

5340-14-549-9485
Mounting Bracket

145499485
2092141-001: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-300-9399
Loop Clamp

143009399
NP15140-01: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-394-7214
Retaining Strap

143947214
NO PRIMARY REF14-394-7214: RNCC: 3 | RNVC: 2
AB1226: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-413-8430
Loop Clamp

144138430
186020-11: RNCC: 3 | RNVC: 2
186020: RNCC: 5 | RNVC: 2

21 Jan 1987

5340-14-390-5149
Friction Catch

143905149
502020: RNCC: 3 | RNVC: 9
362169: RNCC: 5 | RNVC: 9
A9696-18: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-14-397-7875
Retaining Strap

143977875
2-16173: RNCC: 3 | RNVC: 2

29 Jan 1985

5340-14-301-8864
Retaining Strap

143018864
2-14597: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-393-8887
Sliding Door Track

143938887
366A87-1036-36: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-469-5910
Bumper

144695910
160R742313-04: RNCC: 3 | RNVC: 2

4 May 1994

5340-14-239-4356
Lock Bolt

142394356
321A23-2102-00: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-301-4465
Butt Hinge

143014465
P26-306-110X50GS0UDEEAC: RNCC: 2 | RNVC: 2

1 Jan 1973

5340-14-438-6220
Bumper

144386220
332A22-1384-25: RNCC: 3 | RNVC: 2

28 Mar 1990

5340-14-414-3140
Rod End Clevis

144143140
FH1E704-89-01: RNCC: 3 | RNVC: 2

28 Jan 1987

5340-14-413-1666
Angle Bracket

144131666
412702000005: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-537-4418
Bow Handle

145374418
895006: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-420-0491
Angle Bracket

144200491
412902120011: RNCC: 3 | RNVC: 2

18 Nov 1987

5340-14-515-6162
Bridge Clamp

145156162
1061612: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-513-8049
Mounting Bracket

145138049
DE21789: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-571-6953
Utility Access Door

145716953
23139-291: RNCC: 3 | RNVC: 2

24 Apr 2012

5340-14-551-2587
Pipe Hanger

145512587
RA1M702316231N1: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-555-4720
Loop Clamp

145554720
UC-9: RNCC: 3 | RNVC: 2

20 Nov 2007

5340-14-551-6244
Mounting Bracket

145516244
719297: RNCC: 3 | RNVC: 2

10 Oct 2006

5340-14-294-1410
Angle Bracket

142941410
23032983: RNCC: 3 | RNVC: 2
23032983-8: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-377-9020
Retaining Strap

143779020
7512-20259: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-217-9013
Loop Clamp

142179013
3160S23-01-085: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-304-4565
Turnbuckle Body

143044565
M4A383-01-823: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-516-0661
Door Handle

145160661
10323903: RNCC: 3 | RNVC: 2
IF-192-2181: RNCC: 5 | RNVC: 9

8 Sep 1999

5340-14-550-8485
Mounting Bracket

145508485
J10454-01-3000P001: RNCC: 3 | RNVC: 2

20 Jul 2006

5340-14-031-3120
Angle Bracket

140313120
GAM05-145-00-008: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-405-0168
Loop Clamp

144050168
51121905012: RNCC: 3 | RNVC: 2
24PE12: RNCC: 5 | RNVC: 2
25PE12: RNCC: 5 | RNVC: 2
85-693-1675: RNCC: 6 | RNVC: 9

20 Nov 1985

5340-14-489-4835
Mounting Bracket

144894835
J05190-00-0110P007: RNCC: 3 | RNVC: 2
247374-001: RNCC: 5 | RNVC: 9

23 Jul 1997

5340-14-524-6345
Mounting Bracket

145246345
365A87-3012-12: RNCC: 3 | RNVC: 2

29 Mar 2001

5340-14-470-0473
Angle Bracket

144700473
A02645-01-0000P003: RNCC: 3 | RNVC: 2

25 May 1994

5340-14-382-3523
Flush Catch Claw

143823523
400486: RNCC: 3 | RNVC: 2
BGE400486: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-314-0988
Retaining Strap

143140988
549961: RNCC: 3 | RNVC: 2
20549961-3: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-529-3922
Rod End Connector

145293922
8023702C00: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-465-8594
Runner

144658594
81022-6-3-1: RNCC: 3 | RNVC: 2

14 Oct 1993

5340-14-517-5452
Mounting Bracket

145175452
207038: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-302-9056
Access Cover

143029056
N4778-5: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-541-4994
Metal Grille

145414994
AL15-3X56: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-250-9361
Loop Clamp

142509361
C4914: RNCC: 3 | RNVC: 2
9560113350: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-485-7422
Handwheel

144857422
6-21873-OC: RNCC: 3 | RNVC: 2

6 Feb 1997

5340-14-533-5370
Mounting Bracket

145335370
192E325-00: RNCC: 3 | RNVC: 2

10 Feb 2003

5340-14-354-7421
Rod End Connector

143547421
120549: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-335-0500
Handwheel

143350500
MAT137-003F3AVIORB: RNCC: 3 | RNVC: 2
GSM137-007F15AVI0RB: RNCC: 5 | RNVC: 2
GSM137-07F15AVI0RB: RNCC: 5 | RNVC: 2

2 Jun 1976

5340-14-482-9353
Pipe Hanger

144829353
78732-056-050A: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-344-2854
Mending Plate

143442854
T20-13B1305: RNCC: 3 | RNVC: 2

10 Aug 1977

5340-14-358-6114
Retaining Strap

143586114
160-792033-05: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-315-3529
Clamping Catch

143153529
GO.34-ZB: RNCC: 3 | RNVC: 2
0049417: RNCC: 5 | RNVC: 2
G034ZB: RNCC: 5 | RNVC: 2
1038225L00: RNCC: 5 | RNVC: 2
GO34ZB: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-286-4799
Mending Plate

142864799
341A25-1000-27: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-550-0121
Mounting Bracket

145500121
EA6M702-34-22: RNCC: 3 | RNVC: 2

24 May 2006

5340-14-532-0678
Mounting Bracket

145320678
03-725-315: RNCC: 3 | RNVC: 2
SZ03.725.315: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-526-0379
Metal Grille

145260379
341A69-6624-02: RNCC: 3 | RNVC: 2

28 Jun 2001

5340-14-545-4467
Pipe Hanger

145454467
RA1M701366115: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-230-6460
Retaining Strap

142306460
DLT006653: RNCC: 3 | RNVC: 2
DLT06653: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-323-6444
Loop Clamp

143236444
25F4: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-476-0335
Mounting Plate

144760335
205214002: RNCC: 3 | RNVC: 2
PAA52-14-002: RNCC: 5 | RNVC: 2

17 May 1995

5340-14-326-9551
Access Cover

143269551
PAA50-17-019: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-496-2308
Mounting Bracket

144962308
75081-0: RNCC: 3 | RNVC: 2
75081.0: RNCC: 5 | RNVC: 2
F300 0T 021 0487: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-439-7098
Mounting Bracket

144397098
154346: RNCC: 3 | RNVC: 2
392939: RNCC: 5 | RNVC: 2

16 May 1990

5340-14-532-3201
Access Cover

145323201
192E568-00: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-552-6399
Angle Bracket

145526399
RA1B702202661A1: RNCC: 3 | RNVC: 2

18 Jan 2007

5340-14-533-9810
Mounting Bracket

145339810
M33015571-8: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-393-7475
Pipe Hanger

143937475
NO PRIMARY REF14-393-7475: RNCC: 3 | RNVC: 2
0329-0414-403REP14: RNCC: 5 | RNVC: 9

23 Jun 1984

5340-14-411-5262
Bumper

144115262
N262-0705-51007-10: RNCC: 3 | RNVC: 2

20 Aug 1986

5340-14-512-5440
Butt Hinge

145125440
F292-19-11: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-516-0093
Loop Clamp

145160093
C2-30: RNCC: 3 | RNVC: 2
FH225-7000-030N: RNCC: 5 | RNVC: 9

1 Sep 1999

5340-14-263-9696
Mounting Bracket

142639696
330A87-2107-00: RNCC: 3 | RNVC: 2
330A87-2107-0000: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-296-5039
Pipe Hanger

142965039
NO PRIMARY REF14-296-5039: RNCC: 3 | RNVC: 2
613-556-026-0: RNCC: 5 | RNVC: 2
175518: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-341-8675
Tubular Fairlead

143418675
M3R210-23-810: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-532-5961
Pipe Hanger

145325961
E4M524-11: RNCC: 3 | RNVC: 2

18 Nov 2002

5340-14-525-6479
Mounting Plate

145256479
20 242 020 7160: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-424-1840
Access Cover

144241840
M581-004001: RNCC: 3 | RNVC: 2
BKN004001-20: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-376-5156
Retaining Strap

143765156
NO PRIMARY REF14-376-5156: RNCC: 3 | RNVC: 2
40418402: RNCC: 5 | RNVC: 2
404184082: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-365-9751
Filler Opening Cap

143659751
K97Z40-208: RNCC: 3 | RNVC: 2

14 Mar 1996

5340-14-358-2762
Anchor Strap

143582762
107176-01: RNCC: 3 | RNVC: 2
107176-01: RNCC: 5 | RNVC: 9

13 Aug 1979

5340-14-374-7205
Bumper

143747205
365A21-3419-20: RNCC: 3 | RNVC: 2

30 Jan 1982

5340-14-389-7779
Luggage Handle

143897779
CPM2: RNCC: 3 | RNVC: 2
85-692-6090: RNCC: 6 | RNVC: 9

20 Dec 1983

5340-14-244-9833
Mending Plate

142449833
NO PRIMARY REF14-244-9833: RNCC: 3 | RNVC: 2
21909B: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-374-7223
Handwheel

143747223
365A27-3146-20: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-266-3746
Rod End Connector

142663746
ST406M52P15E65: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-529-5587
Mounting Bracket

145295587
330A65-6710-44: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-334-4751
Handle Grip

143344751
2302-40-01: RNCC: 3 | RNVC: 2

1 Jun 1976

5340-14-534-9834
Mounting Bracket

145349834
332A58-4522-20: RNCC: 3 | RNVC: 2

23 Apr 2003

5340-14-330-3627
Loop Clamp

143303627
NO PRIMARY REF14-330-3627: RNCC: 3 | RNVC: 2
124999: RNCC: 5 | RNVC: 9
C124999: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-466-8286
Pipe Hanger

144668286
18804: RNCC: 3 | RNVC: 2
18804-000-00: RNCC: 5 | RNVC: 9

3 Dec 1993

5340-14-218-0664
Angle Bracket

142180664
AA7-62NF1-1332: RNCC: 3 | RNVC: 2
AA52-1332: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-429-6174
Retaining Strap

144296174
321A84-0081-23: RNCC: 3 | RNVC: 2
85-693-7414: RNCC: 6 | RNVC: 9

3 Feb 1989

5340-14-459-6066
Access Cover

144596066
39360138: RNCC: 3 | RNVC: 9

10 Dec 1992

5340-14-503-0041
Bumper

145030041
330A22-2413-116: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-465-2988
Mounting Plate

144652988
365A81-0282-20: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-468-1583
Angle Bracket

144681583
78703-048: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-407-2724
Mounting Plate

144072724
160H712854-15: RNCC: 3 | RNVC: 2

12 Feb 1986

5340-14-475-0587
Mounting Plate

144750587
J01037-03-2232P014: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-291-4025
Retaining Strap

142914025
NO PRIMARY REF14-291-4025: RNCC: 3 | RNVC: 2
0400420080: RNCC: 5 | RNVC: 2
9560110670: RNCC: 5 | RNVC: 2
53400: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-483-4935
Cover Strip

144834935
332A58-1558-25: RNCC: 3 | RNVC: 2

14 Sep 1996

5340-14-512-3071
Angle Bracket

145123071
38222977: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-14-439-0209
Mounting Bracket

144390209
365A57-3305-00: RNCC: 3 | RNVC: 2

19 Apr 1990

5340-14-487-5596
Turnbuckle Body

144875596
43905DG1310D: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-286-4875
Pipe Hanger

142864875
341A72-1012-00: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-485-3264
Loop Clamp

144853264
ST159-2M311-1P56: RNCC: 3 | RNVC: 2

15 Jan 1997

5340-14-501-4792
Access Cover

145014792
NO PRIMARY REF14-501-4792: RNCC: 3 | RNVC: 2
NNP4130848425493: RNCC: 5 | RNVC: 9

29 Oct 1997

5340-14-438-4854
Metal Grille

144384854
332A61-2346-07: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-339-4063
Loop Clamp

143394063
M3E700-20-903: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-466-2951
Mounting Bracket

144662951
A1-73073: RNCC: 3 | RNVC: 2

3 Nov 1993

5340-14-351-6318
Access Cover

143516318
P3T009952-00: RNCC: 3 | RNVC: 2
3T009952-00: RNCC: 5 | RNVC: 2
3T009952-00: RNCC: 5 | RNVC: 9
P3T009952-00: RNCC: 5 | RNVC: 9

12 Sep 1978

5340-14-206-9147
Loop Clamp

142069147
51113105005: RNCC: 3 | RNVC: 2
A0021-25G05: RNCC: 5 | RNVC: 2
Z00.N7141380604: RNCC: 5 | RNVC: 2
25G5: RNCC: 5 | RNVC: 2
9562810150: RNCC: 5 | RNVC: 2
A0021-25G05: RNCC: 5 | RNVC: 2
18877116-1: RNCC: 5 | RNVC: 2
25G05: RNCC: 5 | RNVC: 9
221416: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-451-1317
Strap Hinge

144511317
A10140-03-1300: RNCC: 3 | RNVC: 2

30 Oct 1991

5340-14-465-5045
Access Cover

144655045
365A81-0065-00: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-305-6790
Rod End Clevis

143056790
E4M272-57-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-459-6650
Arched Cushion

144596650
MAT169-0012F19DE11: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-372-2318
Retaining Strap

143722318
AM182-84: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-462-3733
Runner

144623733
P3C006381-00: RNCC: 3 | RNVC: 9
5046126: RNCC: 5 | RNVC: 9

15 Apr 1993

5340-14-217-8991
Loop Clamp

142178991
3160S52-10-982: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-363-8909
Anchor Strap

143638909
NO PRIMARY REF14-363-8909: RNCC: 3 | RNVC: 2
Z45958: RNCC: 5 | RNVC: 9

7 Aug 1980

5340-14-511-6332
Pipe Hanger

145116332
78732-025-031B: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-257-2344
Bumper

142572344
330A58-4357-20: RNCC: 3 | RNVC: 2
330A58-4357-2000: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-572-9841
Utility Access Door

145729841
332A22-0110-0651: RNCC: 3 | RNVC: 2
332A2201100651: RNCC: 5 | RNVC: 2

3 Sep 2012

5340-14-549-4944
Mounting Bracket

145494944
MC201-215160-00: RNCC: 3 | RNVC: 2

11 Apr 2006

5340-14-513-4161
Lock-Release Lever

145134161
NO PRIMARY REF14-513-4161: RNCC: 3 | RNVC: 2
NNP 1240860464977: RNCC: 5 | RNVC: 9

17 Mar 1999

5340-14-529-3507
Access Cover

145293507
457-12611-000: RNCC: 3 | RNVC: 2

22 Mar 2002

5340-14-304-7961
Mending Plate

143047961
NO PRIMARY REF14-304-7961: RNCC: 3 | RNVC: 2
29-02-10-11: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-454-8941
Turnbuckle Body

144548941
ST406M41P148: RNCC: 3 | RNVC: 2
50-1010: RNCC: 5 | RNVC: 2

24 Apr 1992

5340-14-388-1551
Butt Hinge

143881551
J36-190-80X60LAIT0N: RNCC: 2 | RNVC: 2
5340CECHARNIERELAIT80X60: RNCC: 5 | RNVC: 9

12 Oct 1983

5340-14-440-6774
Mounting Bracket

144406774
332A84-1013-22: RNCC: 3 | RNVC: 2

18 Jul 1990

5340-14-528-0331
Access Cover

145280331
114E389-01: RNCC: 3 | RNVC: 2
114E389-01: RNCC: 5 | RNVC: 9

12 Dec 2001

5340-14-222-8443
Cover Strip

142228443
3160S21-10-001: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-369-3427
Angle Bracket

143693427
ADP2-611-10-820: RNCC: 3 | RNVC: 2
ADP2-601-10-820: RNCC: 5 | RNVC: 2

17 Apr 1981

5340-14-495-3529
Mounting Plate

144953529
B33436-95: RNCC: 3 | RNVC: 2
F300 0T 019 1102: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-330-3506
Access Cover

143303506
NO PRIMARY REF14-330-3506: RNCC: 3 | RNVC: 2
057897Z: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-370-7440
Threaded Rod End

143707440
676-45536-00: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-383-3712
Support Hook

143833712
3511 191 31801: RNCC: 3 | RNVC: 2
3511-191-31801: RNCC: 5 | RNVC: 2

11 Apr 1983

5340-14-386-8750
Mending Plate

143868750
01-04515-102: RNCC: 3 | RNVC: 2
01-04-515-102: RNCC: 5 | RNVC: 2
85-692-4790: RNCC: 6 | RNVC: 9

24 Aug 1983

5340-14-348-0709
Loop Clamp

143480709
51413119003: RNCC: 3 | RNVC: 2
28G3: RNCC: 5 | RNVC: 2
A0021-28G3: RNCC: 5 | RNVC: 9

29 Mar 1978

5340-14-391-6430
Loop Clamp

143916430
51313105025: RNCC: 3 | RNVC: 2
21G25: RNCC: 5 | RNVC: 2
ASNA0021-21G25: RNCC: 5 | RNVC: 2
A0021-21G25: RNCC: 5 | RNVC: 2

21 Mar 1984

5340-14-310-6836
Access Cover

143106836
NO PRIMARY REF14-310-6836: RNCC: 3 | RNVC: 2
1178-3: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-285-4662
Loop Clamp

142854662
242-34: RNCC: 3 | RNVC: 2
RTM 242-34: RNCC: 5 | RNVC: 2
2278F4: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-456-3220
Loop Clamp

144563220
E1M-3710-01: RNCC: 3 | RNVC: 2
E1M3710-01: RNCC: 5 | RNVC: 2
MAT169-0024F10ROUGE: RNCC: 5 | RNVC: 2
E1M3710-01: RNCC: 5 | RNVC: 2

25 Jun 1992

5340-14-477-7358
Lock-Release Lever

144777358
1216-131-000A: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-14-364-0937
Angle Bracket

143640937
366A24-0100-46: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-465-1438
Access Cover

144651438
365A21-3799-00: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-523-8839
Mounting Plate

145238839
546585-001: RNCC: 3 | RNVC: 9

8 Feb 2001

5340-14-554-9990
Utility Access Door

145549990
06 702 16: RNCC: 3 | RNVC: 2
PDTZ-0005: RNCC: 5 | RNVC: 2

17 Sep 2007

5340-14-328-9706
Mending Plate

143289706
NO PRIMARY REF14-328-9706: RNCC: 3 | RNVC: 2
366265REPU12: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-428-1252
Bumper

144281252
3511 190 55181: RNCC: 3 | RNVC: 2
89288172: RNCC: 5 | RNVC: 2
3511-190-55181: RNCC: 5 | RNVC: 2

1 Dec 1988

5340-14-532-5007
Cover Strip

145325007
42-250-258: RNCC: 3 | RNVC: 2
SZ42.250.258: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-14-435-9649
Loop Holder

144359649
332A25-1067-10: RNCC: 3 | RNVC: 2

29 Nov 1989

5340-14-458-7793
Cushioning Pad

144587793
MN03/09-52: RNCC: 3 | RNVC: 2

4 Nov 1992

5340-14-351-1523
Retaining Clip

143511523
5413580L: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-546-2893
Mounting Plate

145462893
10645782001: RNCC: 3 | RNVC: 2

22 Jun 2005

5340-14-432-7442
Support Hook

144327442
H3120-1: RNCC: 3 | RNVC: 2

21 Jun 1989

5340-14-341-2170
Mending Plate

143412170
425-30584-000: RNCC: 3 | RNVC: 2
425-30584-000: RNCC: 5 | RNVC: 2

16 Mar 1977

5340-14-512-2299
Mounting Plate

145122299
3BM01226AAAA: RNCC: 3 | RNVC: 2

8 Feb 1999

5340-14-536-5207
Rim Lock

145365207
1000-U530/U536/23/24/16: RNCC: 3 | RNVC: 2
1000-U536/24/U530/23/16: RNCC: 5 | RNVC: 2

28 Aug 2003

5340-14-548-1068
Mounting Bracket

145481068
RA1M701346131A1: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-397-5007
Mounting Plate

143975007
069A44-717790L: RNCC: 3 | RNVC: 2
0717790L00: RNCC: 5 | RNVC: 2

14 Dec 1984

5340-14-460-5899
Bumper

144605899
02540001010: RNCC: 3 | RNVC: 2
15-018: RNCC: 5 | RNVC: 2
254-001: RNCC: 5 | RNVC: 2
3597470019283: RNCC: 5 | RNVC: 2

3 Feb 1993

5340-14-220-1396
Cover Strip

142201396
3160S25-23-016: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-281-9151
Mounting Plate

142819151
423586: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-463-3669
Mounting Bracket

144633669
16298026: RNCC: 1 | RNVC: 2
044H01-100006-0500: RNCC: 3 | RNVC: 2
0903173L00: RNCC: 5 | RNVC: 2
16298026: RNCC: 5 | RNVC: 9

9 Jun 1993

5340-14-382-2079
Bow Handle

143822079
5516003501: RNCC: 3 | RNVC: 2
86003501: RNCC: 5 | RNVC: 2
5516003501: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-481-3501
Retaining Strap

144813501
92 10 44: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-382-6115
Mounting Plate

143826115
16960252: RNCC: 3 | RNVC: 2
16960252: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-391-8107
Rod End Clevis

143918107
365A92-1148-13: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-447-3607
Mounting Plate

144473607
16929141: RNCC: 3 | RNVC: 2
16929141: RNCC: 5 | RNVC: 9

15 May 1991

5340-14-305-7027
Butt Hinge

143057027
MS7524-5-7200: RNCC: 3 | RNVC: 2
MS7524-5: RNCC: 5 | RNVC: 2
MS7524-5: RNCC: 5 | RNVC: 9
MS7524-5-1830: RNCC: 5 | RNVC: 9
MS7524-5: RNCC: 5 | RNVC: 9
MS7524-5-72: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-526-4517
Angle Bracket

145264517
RA1M704846841N1: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-444-2110
Protection Bellows

144442110
585A115: RNCC: 3 | RNVC: 2

18 Dec 1990

5340-14-530-0410
Access Cover

145300410
5472-01R: RNCC: 3 | RNVC: 2
5472-01R: RNCC: 3 | RNVC: 9

30 Apr 2002

5340-14-486-6113
Butt Hinge

144866113
A10-12-926-16-1: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-14-391-2764
Runner

143912764
HPC0UL134B: RNCC: 3 | RNVC: 2

1 Mar 1984

5340-14-534-1112
Mounting Bracket

145341112
332A85-0124-20: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-516-3257
Lock Bolt

145163257
1SH41598406: RNCC: 3 | RNVC: 2

21 Sep 1999

5340-14-316-5673
Retaining Strap

143165673
E4P841-20-810: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-459-7056
Mounting Bracket

144597056
PE75030-1F: RNCC: 3 | RNVC: 2

15 Dec 1992

5340-14-550-0430
Synchro Clamp

145500430
4679178A: RNCC: 3 | RNVC: 2

30 May 2006

5340-14-530-6475
Mounting Plate

145306475
F1400948: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-14-397-1231
Chassis Base

143971231
20734557: RNCC: 3 | RNVC: 2

1 Dec 1984

5340-14-486-1816
Door Handle

144861816
759290: RNCC: 3 | RNVC: 2
63841-1: RNCC: 5 | RNVC: 9

5 Mar 1997

5340-14-533-6582
Mounting Bracket

145336582
F1262203: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-14-539-4240
Mounting Plate

145394240
21027464-00: RNCC: 3 | RNVC: 2
21027464-6: RNCC: 5 | RNVC: 2

14 Jan 2004

5340-14-297-3127
Retaining Strap

142973127
501-709-298-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-466-7301
Mounting Bracket

144667301
5240711: RNCC: 3 | RNVC: 2

24 Nov 1993

5340-14-434-3230
Mounting Plate

144343230
OUT5209-039: RNCC: 3 | RNVC: 2
0UT5209-039: RNCC: 5 | RNVC: 2

20 Sep 1989

5340-14-335-5639
Access Cover

143355639
MB93-01: RNCC: 3 | RNVC: 2

12 May 1999

5340-14-573-4999
Utility Access Door

145734999
332P22-9015-04: RNCC: 3 | RNVC: 2
332P22901504: RNCC: 5 | RNVC: 2

17 Oct 2012

5340-14-542-3594
Mounting Plate

145423594
4G0-10229-100: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-14-357-0711
Bumper

143570711
NO PRIMARY REF14-357-0711: RNCC: 3 | RNVC: 2
A2: RNCC: 5 | RNVC: 9

7 Jun 1979

5340-14-429-4579
Mounting Plate

144294579
755-1015: RNCC: 3 | RNVC: 2

24 Jan 1989

5340-14-212-5699
Access Cover

142125699
1204-28-3-0-14: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-310-2408
Snap Hook

143102408
4702-40X32-16: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-474-9567
Mounting Plate

144749567
350A54-0216-00: RNCC: 3 | RNVC: 2

15 Mar 1995

5340-14-339-4914
Retaining Strap

143394914
M3E702-039: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-451-6780
Rim Latch

144516780
1000U66U197U165-23-24-113: RNCC: 3 | RNVC: 2

28 Nov 1991

5340-14-449-6230
Access Cover

144496230
34-4303-028: RNCC: 3 | RNVC: 2

28 Aug 1991

5340-14-475-5061
Mounting Bracket

144755061
TB1030101F019: RNCC: 3 | RNVC: 2
TB1030101-00SPF019: RNCC: 5 | RNVC: 2
08-60-0044: RNCC: 5 | RNVC: 9

12 Apr 1995

5340-14-458-7724
Utility Access Door

144587724
MN02/11-11-16: RNCC: 3 | RNVC: 2
RAR3515: RNCC: 5 | RNVC: 2
MN04/11-11-16: RNCC: 5 | RNVC: 2

3 Nov 1992

5340-14-569-7159
Utility Resilient Mount

145697159
40/13.5X40-100M-90SH: RNCC: 3 | RNVC: 2
LK0000004077-REP3: RNCC: 5 | RNVC: 2
40X13.5X40-100M-90SH: RNCC: 5 | RNVC: 2
A211600000031: RNCC: 5 | RNVC: 2

17 Oct 2011

5340-14-528-9122
Bumper

145289122
312-10396-003: RNCC: 3 | RNVC: 2

22 Feb 2002

5340-14-462-8610
Mechanical Puller

144628610
C46385: RNCC: 3 | RNVC: 2
85-694-6211: RNCC: 6 | RNVC: 9

5 May 1993

5340-14-428-4791
Loop Clamp

144284791
75109-50: RNCC: 3 | RNVC: 2
CDM2-50: RNCC: 5 | RNVC: 2

8 Dec 1988

5340-14-485-9135
Mounting Bracket

144859135
332A61-3121-02: RNCC: 3 | RNVC: 2

19 Feb 1997

Load More Results