What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 23 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 23 of 446

5340-14-520-3097
Mounting Plate

145203097
23194446-5: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-439-5192
Locking Stay

144395192
PLU20-5-6: RNCC: 3 | RNVC: 2

11 May 1990

5340-14-360-2224
Rim Latch Set

143602224
16294722: RNCC: 3 | RNVC: 2
16294722: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-286-9879
Retaining Strap

142869879
2-12673: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-545-9517
Mounting Plate

145459517
27120011-8: RNCC: 3 | RNVC: 2

30 May 2005

5340-14-383-2747
Mending Plate

143832747
279389-1: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-367-7112
Pipe Hanger

143677112
502-560-757-0: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-502-9890
Mounting Bracket

145029890
332A21-1141-02: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-457-6786
Runner

144576786
A03037-10-2010P101: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-534-5628
Retaining Strap

145345628
FA1R708-258: RNCC: 3 | RNVC: 2

26 Mar 2003

5340-14-555-8429
Mounting Bracket

145558429
252489587-00: RNCC: 3 | RNVC: 2

18 Dec 2007

5340-14-354-2594
Rod End Connector

143542594
650-42796-00: RNCC: 3 | RNVC: 2

30 Jan 1979

5340-14-418-0554
Flush Catch Claw

144180554
050936M01TM79: RNCC: 3 | RNVC: 2
050936M: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-504-7838
Mounting Bracket

145047838
2253574T00: RNCC: 3 | RNVC: 2
2 253 574 T 00: RNCC: 5 | RNVC: 2
8005754M00: RNCC: 5 | RNVC: 2

4 Mar 1998

5340-14-539-2456
Mounting Plate

145392456
21169229-4: RNCC: 3 | RNVC: 2

17 Dec 2003

5340-14-422-7549
Rod End Connector

144227549
SI25C: RNCC: 3 | RNVC: 2
A09030314: RNCC: 5 | RNVC: 2
91636323: RNCC: 5 | RNVC: 2
SKFSI25C: RNCC: 5 | RNVC: 9

17 Mar 1988

5340-14-394-9402
Strap Fastener Loop

143949402
20320340: RNCC: 3 | RNVC: 2
20320340: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-386-5402
Access Cover

143865402
236-3: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-246-2536
Retaining Clip

142462536
424-41043-000: RNCC: 3 | RNVC: 2
424-41043-000: RNCC: 5 | RNVC: 2
14844: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-472-8558
Arched Cushion

144728558
MAT169-0027F19DE14: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-432-1282
Mounting Plate

144321282
853-600-137-0: RNCC: 3 | RNVC: 2

24 May 1989

5340-14-340-3130
Pipe Hanger

143403130
M3C704-050: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-352-8635
Synchro Clamp

143528635
S3666-1DG: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-228-0317
Handwheel

142280317
GSM137-001F18DET9SANSBOULEAS10G: RNCC: 3 | RNVC: 2
GSM137-01F18DET9SANSB0ULEAS10G: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-452-9449
Rod End Connector

144529449
7-89-2-08REP5: RNCC: 3 | RNVC: 2

29 Jan 1992

5340-14-440-1522
Rim Lock Set

144401522
SCN600-022-02: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-501-7396
Angle Bracket

145017396
307-862-401-0: RNCC: 3 | RNVC: 2

5 Nov 1997

5340-14-348-3909
Rod End Connector

143483909
880-27-0-402-0: RNCC: 3 | RNVC: 2
85-688-9019: RNCC: 6 | RNVC: 9

29 Mar 1978

5340-14-446-3925
Webbing Strap

144463925
P4C005752-02: RNCC: 3 | RNVC: 9

19 Mar 1991

5340-14-378-5414
Angle Bracket

143785414
121A63-104-10-2: RNCC: 3 | RNVC: 2
121A63-104-10-2: RNCC: 5 | RNVC: 2

11 Aug 1982

5340-14-549-8950
Runner

145498950
41105933-002: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-257-9253
Angle Bracket

142579253
NO PRIMARY REF14-257-9253: RNCC: 3 | RNVC: 2
C692767-2A: RNCC: 5 | RNVC: 9
642016-2: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-345-2455
Retaining Strap

143452455
FB1A761-108: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-433-4474
Flush Catch Claw

144334474
LA1202MALE: RNCC: 3 | RNVC: 2
2MALE: RNCC: 5 | RNVC: 2
PLU20-13-3: RNCC: 5 | RNVC: 2

26 Jul 1989

5340-14-391-0202
Angle Bracket

143910202
121A63-104-11-1: RNCC: 3 | RNVC: 2

1 Mar 1984

5340-14-395-5550
Rod End Clevis

143955550
5-1881B43152-1476: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-554-0801
Cane Bolt

145540801
976-153166-01: RNCC: 3 | RNVC: 2
189613342: RNCC: 5 | RNVC: 2

8 Jun 2007

5340-14-338-1377
Bow Handle

143381377
NO PRIMARY REF14-338-1377: RNCC: 3 | RNVC: 2
S273840-4: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-14-287-3635
Mending Plate

142873635
121E22-340-07-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-515-0558
Pipe Hanger

145150558
307-904-201-0: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-14-323-3779
Handwheel

143233779
GSM137-018F6REP1: RNCC: 3 | RNVC: 2
000MA060R1F6: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-301-1656
Rim Latch

143011656
NO PRIMARY REF14-301-1656: RNCC: 3 | RNVC: 2
33-2191-0: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-384-0574
Loop Clamp

143840574
PE27020-1R: RNCC: 3 | RNVC: 2
PE27020-1: RNCC: 5 | RNVC: 2
85-692-0383: RNCC: 6 | RNVC: 9

4 May 1983

5340-14-441-9465
Anchor Strap

144419465
8065-22-1: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-370-3169
Mending Plate

143703169
23060507: RNCC: 3 | RNVC: 2
23060507-2: RNCC: 5 | RNVC: 2

18 May 1981

5340-14-457-2608
Mounting Plate

144572608
402201A-SG10137-Z2CND17-12: RNCC: 3 | RNVC: 2

20 Aug 1992

5340-14-476-7698
Angle Bracket

144767698
01FUAC4202: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-14-201-9182
Retaining Strap

142019182
574-308-120-0: RNCC: 3 | RNVC: 2

1 Jan 1962

5340-14-519-2667
Mounting Plate

145192667
3511 111 42851: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-536-2093
Mounting Bracket

145362093
5617680A: RNCC: 3 | RNVC: 2

18 Jul 2003

5340-14-466-1818
Angle Bracket

144661818
164419: RNCC: 3 | RNVC: 2
89170019: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-475-1740
Loop Clamp

144751740
51311703005: RNCC: 3 | RNVC: 2
574841: RNCC: 5 | RNVC: 2

22 Mar 1995

5340-14-456-5636
Filler Opening Cap

144565636
16027000C: RNCC: 3 | RNVC: 2
R90788: RNCC: 5 | RNVC: 2

9 Jul 1992

5340-14-468-1769
Angle Bracket

144681769
78704-30-050A: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-490-5877
Plug Button

144905877
5501-104-0: RNCC: 3 | RNVC: 2

2 Oct 1997

5340-14-411-2498
Loop Clamp

144112498
51314105045: RNCC: 3 | RNVC: 2
21S45: RNCC: 5 | RNVC: 2
A0021-21S45: RNCC: 5 | RNVC: 2
ASNA0021-21S45: RNCC: 5 | RNVC: 2

6 Aug 1986

5340-14-252-7027
Loop Clamp

142527027
NO PRIMARY REF14-252-7027: RNCC: 3 | RNVC: 2
900007-3: RNCC: 5 | RNVC: 2
124120-3: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-384-0726
Loop Clamp

143840726
HB8722-2: RNCC: 3 | RNVC: 2
324961-002: RNCC: 5 | RNVC: 2
324961-002: RNCC: 5 | RNVC: 9

4 May 1983

5340-14-212-9243
Mending Plate

142129243
NO PRIMARY REF14-212-9243: RNCC: 3 | RNVC: 2
501-847-010-0: RNCC: 5 | RNVC: 2
77808: RNCC: 5 | RNVC: 9
77808: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-461-6625
Protection Bellows

144616625
1049591Q00: RNCC: 3 | RNVC: 2
MAT460-01-03-A: RNCC: 5 | RNVC: 2

19 Mar 1993

5340-14-509-6410
Spring Holder

145096410
6194-3-122: RNCC: 3 | RNVC: 2
1805411: RNCC: 5 | RNVC: 2
L805411: RNCC: 5 | RNVC: 9

28 Oct 1998

5340-14-403-7182
Clamping Catch

144037182
GP42CH: RNCC: 3 | RNVC: 2
427707: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-439-3158
Cover Strip

144393158
DA2C284180026: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-459-7343
Loop Holder

144597343
LN321022REP7LAG3-L32X32X3: RNCC: 3 | RNVC: 2
RAB0194: RNCC: 5 | RNVC: 2

15 Dec 1992

5340-14-514-9853
Mounting Plate

145149853
SA/CS11/5: RNCC: 3 | RNVC: 2

25 Jun 1999

5340-14-449-9163
Detent Plunger

144499163
2-DHC6-04-222: RNCC: 3 | RNVC: 2

16 Sep 1991

5340-14-478-0538
Mounting Plate

144780538
000-48395-000: RNCC: 3 | RNVC: 2
48395: RNCC: 5 | RNVC: 2

11 Oct 1995

5340-14-227-9351
Mending Plate

142279351
23001086: RNCC: 3 | RNVC: 2
23001086-9: RNCC: 5 | RNVC: 2
6-646: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-483-8009
Loop Clamp

144838009
6-0010-408: RNCC: 3 | RNVC: 2
1110778A00: RNCC: 5 | RNVC: 2

3 Oct 1996

5340-14-525-0968
Retaining Strap

145250968
3511-180-05761: RNCC: 3 | RNVC: 2

18 May 2001

5340-14-280-8995
Retaining Strap

142808995
77086-120: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-502-2809
Self-Locking Insert

145022809
MAT176-0271: RNCC: 3 | RNVC: 2

5 Dec 1997

5340-14-542-2341
Plug Button

145422341
602331608: RNCC: 3 | RNVC: 2
602331608: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-359-2865
Mending Plate

143592865
L06: RNCC: 3 | RNVC: 2
L1001-6: RNCC: 5 | RNVC: 2

2 Oct 1979

5340-14-472-3532
Access Cover

144723532
1049637B01: RNCC: 3 | RNVC: 2
1049637B01: RNCC: 5 | RNVC: 2

19 Oct 1994

5340-14-339-4523
Pipe Hanger

143394523
501-486-759-0: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-375-3953
Bumper

143753953
121A63-213-22-0: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-515-8015
Mounting Bracket

145158015
47217657: RNCC: 3 | RNVC: 2

4 Aug 1999

5340-14-311-3952
Access Cover

143113952
100304: RNCC: 3 | RNVC: 2
8098862: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-460-2999
Utility Access Door

144602999
09046: RNCC: 3 | RNVC: 2
3303430090465: RNCC: 5 | RNVC: 2

21 Jan 1993

5340-14-472-8245
Cushioning Pad

144728245
2209218P3: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-246-0879
Retaining Strap

142460879
2-01416: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-539-7446
Mounting Bracket

145397446
21034052-00: RNCC: 3 | RNVC: 2
21034052-8: RNCC: 5 | RNVC: 2

5 Feb 2004

5340-14-432-3647
Mounting Bracket

144323647
NO PRIMARY REF14-432-3647: RNCC: 3 | RNVC: 2
10341-4: RNCC: 5 | RNVC: 9
3511 265 04461: RNCC: 5 | RNVC: 9
3511-265-04461: RNCC: 5 | RNVC: 9

7 Jun 1989

5340-14-471-7323
Synchro Clamp

144717323
2023937C: RNCC: 3 | RNVC: 2

14 Sep 1994

5340-14-412-4138
Retaining Strap

144124138
3736908: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-14-393-9265
Mounting Plate

143939265
17-1-55: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-539-6471
Retaining Strap

145396471
21226912-00: RNCC: 3 | RNVC: 2
21226912-2: RNCC: 5 | RNVC: 2

28 Jan 2004

5340-14-483-5227
Mounting Plate

144835227
1097665W00: RNCC: 3 | RNVC: 2

18 Sep 1996

5340-14-457-7179
Door Handle

144577179
1318-A6: RNCC: 3 | RNVC: 2

17 Sep 1992

5340-14-295-8273
Rod End Connector

142958273
C55591: RNCC: 3 | RNVC: 2
C55591: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-323-7256
Loop Clamp

143237256
501-802-212-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-470-9862
Rod End Clevis

144709862
37174-1: RNCC: 3 | RNVC: 2
85-695-3323: RNCC: 6 | RNVC: 9

20 Jul 1994

5340-14-386-7340
Bail Handle

143867340
16909534: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-548-3910
Loop Clamp

145483910
EN4113S11NH: RNCC: 2 | RNVC: 2

12 Jan 2006

5340-14-444-8577
Rim Lock Set

144448577
TL1018L: RNCC: 3 | RNVC: 2
TL1018L: RNCC: 5 | RNVC: 2
A099001180: RNCC: 5 | RNVC: 2
A099001180: RNCC: 5 | RNVC: 9
JOSTL1018L: RNCC: 5 | RNVC: 9

23 Jan 1991

5340-14-350-7204
Rod End Connector

143507204
CV18-29-12E: RNCC: 3 | RNVC: 2
CV18-29-12E: RNCC: 5 | RNVC: 2

12 Jul 1978

5340-14-460-0341
Access Cover

144600341
320602: RNCC: 3 | RNVC: 2
320602: RNCC: 5 | RNVC: 9

7 Jan 1993

5340-14-420-6776
Mounting Plate

144206776
4-453718: RNCC: 3 | RNVC: 9

16 Dec 1987

5340-14-457-5442
Retaining Strap

144575442
686121: RNCC: 3 | RNVC: 2
MB-123-C: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-517-6407
Mounting Plate

145176407
CRM280150472: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-398-7555
Rod End Clevis

143987555
2-23399: RNCC: 3 | RNVC: 2

11 Feb 1985

5340-14-482-1950
Metal Grille

144821950
23MEFM327400-306F4REP1: RNCC: 3 | RNVC: 2
RAB9295: RNCC: 5 | RNVC: 2

26 Jun 1996

5340-14-517-7660
Mounting Bracket

145177660
009881035P: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-14-434-5389
Clamp Bolt Assembly

144345389
S3SD18123-2: RNCC: 3 | RNVC: 2
S3SD18123-2: RNCC: 5 | RNVC: 2
V3SD18123-2: RNCC: 5 | RNVC: 2

20 Sep 1989

5340-14-349-5781
Mending Plate

143495781
79077052: RNCC: 3 | RNVC: 2
79077052: RNCC: 5 | RNVC: 9

22 May 1978

5340-14-392-9998
Mending Plate

143929998
5000706737: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-14-262-5585
Rod End Connector

142625585
109154: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-355-1163
Strap Fastener Loop

143551163
RAPC0300CPH0SPHATE: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-462-9147
Bumper

144629147
28022928-1: RNCC: 3 | RNVC: 2
89295425: RNCC: 5 | RNVC: 2

5 May 1993

5340-14-508-0623
Mounting Bracket

145080623
45411677: RNCC: 3 | RNVC: 2
45411677: RNCC: 5 | RNVC: 9

26 Aug 1998

5340-14-546-0006
Webbing Strap

145460006
154466-2: RNCC: 3 | RNVC: 2

2 Jun 2005

5340-14-487-4971
Mounting Plate

144874971
25612585: RNCC: 3 | RNVC: 2
2-561258-5: RNCC: 5 | RNVC: 2

10 Apr 1997

5340-14-318-0025
Loop Clamp

143180025
50011-3-20: RNCC: 3 | RNVC: 2
3747-134: RNCC: 3 | RNVC: 2
0400465200: RNCC: 5 | RNVC: 2
9560114900: RNCC: 5 | RNVC: 2
NSA935807C20: RNCC: 5 | RNVC: 2
NSA935807C20: RNCC: 5 | RNVC: 2
50011-3-20: RNCC: 5 | RNVC: 9
P50011-3-20: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-472-5658
Mending Plate

144725658
S3849126: RNCC: 3 | RNVC: 2
849126: RNCC: 5 | RNVC: 9

3 Nov 1994

5340-14-414-1160
Handwheel

144141160
0022345ACIE150: RNCC: 3 | RNVC: 2
0022345ACIE150: RNCC: 3 | RNVC: 9
0022345AS13160: RNCC: 5 | RNVC: 9
2-150-2345: RNCC: 5 | RNVC: 9

22 Jan 1987

5340-14-531-7921
Eye Hook

145317921
E69301211003: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-444-4053
Bumper

144444053
29728370: RNCC: 3 | RNVC: 2
666: RNCC: 3 | RNVC: 2
29728370: RNCC: 5 | RNVC: 9

9 Jan 1991

5340-14-514-0779
Pawl Fastener Set

145140779
PM1A005001N31: RNCC: 3 | RNVC: 2
PM1A005001N31: RNCC: 5 | RNVC: 2
MJCO: RNCC: 5 | RNVC: 9

22 Apr 1999

5340-14-473-1111
Swivel Caster

144731111
20922-00: RNCC: 3 | RNVC: 9
1082217T00: RNCC: 5 | RNVC: 2

7 Dec 1994

5340-14-441-4877
Mending Plate

144414877
332A72-0158-20: RNCC: 3 | RNVC: 2

30 Aug 1990

5340-14-476-0357
Angle Bracket

144760357
132E470-00: RNCC: 3 | RNVC: 2
132E470-00: RNCC: 5 | RNVC: 9

17 May 1995

5340-14-377-9385
Control Rod

143779385
720080-21061: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-423-9733
Anchor Strap

144239733
7846-16: RNCC: 3 | RNVC: 2
7920057570: RNCC: 5 | RNVC: 2

5 May 1988

5340-14-409-0916
Anchor Strap

144090916
23608035-7: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-389-8534
Angle Bracket

143898534
M5BR882-004: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-396-6574
Loop Clamp

143966574
785-0094: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-532-2512
Mounting Bracket

145322512
R31285 7/7: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-14-360-8126
Butt Hinge

143608126
6232-1217: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-438-6410
Mounting Plate

144386410
83065-31: RNCC: 3 | RNVC: 2
91595073: RNCC: 5 | RNVC: 2

28 Mar 1990

5340-14-504-3928
Retaining Clip

145043928
NO PRIMARY REF14-504-3928: RNCC: 3 | RNVC: 2
NNP5340848461891: RNCC: 5 | RNVC: 9

11 Feb 1998

5340-14-350-3845
Catch Strike

143503845
7371810300: RNCC: 3 | RNVC: 2
9164-09: RNCC: 5 | RNVC: 2

12 Jul 1978

5340-14-355-1877
Catch Strike

143551877
CA24180-2: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-459-6814
Catch Strike

144596814
A10140-03-0000P004: RNCC: 3 | RNVC: 2
44026671: RNCC: 3 | RNVC: 2
44026671: RNCC: 5 | RNVC: 9

10 Dec 1992

5340-14-283-3355
Catch Strike

142833355
F220-35: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-441-0347
Catch Strike

144410347
007520010P: RNCC: 3 | RNVC: 2

14 Aug 1990

5340-14-271-8994
Catch Strike

142718994
3130S95-00-083: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-449-3573
Catch Strike

144493573
R4A292-61-770: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-364-7503
Catch Strike

143647503
532906: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-14-463-2223
Catch Strike

144632223
44021427: RNCC: 3 | RNVC: 2
44021427: RNCC: 5 | RNVC: 9

26 May 1993

5340-14-430-2803
Catch Strike

144302803
JVCIT03-07: RNCC: 3 | RNVC: 2
89412641: RNCC: 5 | RNVC: 2

15 Mar 1989

5340-14-398-7827
Catch Strike

143987827
574025194: RNCC: 3 | RNVC: 2
574025194: RNCC: 5 | RNVC: 2

20 Feb 1985

5340-14-518-3326
Catch Strike

145183326
CHAR9712: RNCC: 3 | RNVC: 9

2 Feb 2000

5340-14-428-5880
Catch Strike

144285880
AC.140-IB: RNCC: 3 | RNVC: 2
AC140IB: RNCC: 5 | RNVC: 2

8 Dec 1988

5340-14-514-9137
Catch Strike

145149137
260561: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-14-542-6312
Catch Strike

145426312
S711A10T1000: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-14-312-0854
Spring Window Bolt

143120854
175327: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-529-8890
Catch Strike

145298890
S12050094C-M781076: RNCC: 3 | RNVC: 2
350474: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-390-1321
Catch Strike

143901321
366A25-1023-01: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-407-7158
Barrel Bolt

144077158
NO PRIMARY REF14-407-7158: RNCC: 3 | RNVC: 2
29020-111: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-14-448-0300
Catch Strike

144480300
PM1A233194: RNCC: 3 | RNVC: 2
PM1A233194: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-430-6990
Spring Window Bolt

144306990
PM1A711240010A1: RNCC: 3 | RNVC: 2
PM1A711240010A1: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-380-4651
Barrel Bolt

143804651
535420: RNCC: 3 | RNVC: 2
00535420: RNCC: 5 | RNVC: 2

29 Nov 1982

5340-14-314-3876
Catch Strike

143143876
CH36-3: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-394-1625
Barrel Bolt

143941625
155-40X30X14CUIVRE: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-419-4025
Barrel Bolt

144194025
688-44171-00: RNCC: 3 | RNVC: 2

16 Oct 1987

5340-14-353-6232
Spring Window Bolt

143536232
131386: RNCC: 3 | RNVC: 2
00022375: RNCC: 5 | RNVC: 2
22375: RNCC: 5 | RNVC: 2

16 Jan 1979

5340-14-442-8731
Catch Strike

144428731
20294140: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-14-475-8718
Catch Strike

144758718
1429L8-1BP: RNCC: 3 | RNVC: 2
1056636L00: RNCC: 5 | RNVC: 2

10 May 1995

5340-14-031-2413
Catch Strike

140312413
BJM00186: RNCC: 3 | RNVC: 2
30-0910: RNCC: 5 | RNVC: 2

14 Jun 1980

5340-14-360-2321
Catch Strike

143602321
16316691: RNCC: 3 | RNVC: 2
16316691: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-391-7617
Catch Strike

143917617
365A21-3191-20: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-332-3644
Spring Window Bolt

143323644
341A25-1067-05: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-546-4909
Catch Strike

145464909
61027014AA: RNCC: 3 | RNVC: 2

8 Jul 2005

5340-14-538-0333
Catch Strike

145380333
212098: RNCC: 3 | RNVC: 2

9 Dec 2003

5340-14-433-4651
Catch Strike

144334651
071457S: RNCC: 3 | RNVC: 2

31 Jul 1989

5340-14-451-5144
Catch Strike

144515144
532252: RNCC: 3 | RNVC: 2

21 Nov 1991

5340-14-420-4869
Catch Strike

144204869
4CR101ZB: RNCC: 3 | RNVC: 2
3005544: RNCC: 5 | RNVC: 2
70041: RNCC: 5 | RNVC: 2
LH933275: RNCC: 5 | RNVC: 2
11010004: RNCC: 5 | RNVC: 2
3275: RNCC: 5 | RNVC: 2
70041: RNCC: 5 | RNVC: 2
LH91228CB: RNCC: 5 | RNVC: 9

10 Dec 1987

5340-14-010-0263
Catch Strike

140100263
3130S28-00-030: RNCC: 3 | RNVC: 2

1 Jan 1961

5340-14-367-7484
Catch Strike

143677484
365A24-1015-57: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-438-3534
Catch Strike

144383534
331A32-2804-20: RNCC: 3 | RNVC: 2

14 Mar 1990

5340-14-543-0736
Catch Strike

145430736
S711A4012214: RNCC: 3 | RNVC: 2

18 Aug 2004

5340-14-392-6591
Catch Strike

143926591
4136P63B: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-471-7317
Catch Strike

144717317
2022380H: RNCC: 3 | RNVC: 2

14 Sep 1994

5340-14-344-2502
Catch Strike

143442502
26949: RNCC: 3 | RNVC: 2

10 Aug 1977

5340-14-545-2924
Catch Strike

145452924
21023673-00: RNCC: 3 | RNVC: 2

31 Mar 2005

5340-14-427-8403
Catch Strike

144278403
350A25-1356-21: RNCC: 3 | RNVC: 2

16 Nov 1988

5340-14-391-6790
Catch Strike

143916790
AC144IB: RNCC: 3 | RNVC: 2
91511355: RNCC: 5 | RNVC: 2

21 Mar 1984

5340-14-305-2840
Barrel Bolt

143052840
42611: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-379-7593
Catch Strike

143797593
BAZ2561: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-407-7548
Spring Window Bolt

144077548
16299863: RNCC: 1 | RNVC: 2
A01074-08-0000P002: RNCC: 3 | RNVC: 2
0072284L00: RNCC: 5 | RNVC: 2
16299863: RNCC: 5 | RNVC: 9

3 Mar 1986

5340-14-461-5953
Catch Strike

144615953
RB121A010-107: RNCC: 3 | RNVC: 9
1011098R00: RNCC: 5 | RNVC: 2

17 Mar 1993

5340-14-484-4655
Catch Strike

144844655
E3810910: RNCC: 3 | RNVC: 9

21 Nov 1996

5340-14-515-5219
Latch Bar

145155219
9402722: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-529-3627
Barrel Bolt

145293627
S1PM4535-20000: RNCC: 3 | RNVC: 2
S1PM4535-20000: RNCC: 5 | RNVC: 9

25 Mar 2002

5340-14-539-7436
Catch Strike

145397436
21034040-00: RNCC: 3 | RNVC: 2
21034040-3: RNCC: 5 | RNVC: 2

5 Feb 2004

5340-14-381-8581
Spring Window Bolt

143818581
16760890: RNCC: 3 | RNVC: 2
16760890: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-398-6700
Catch Strike

143986700
46559002: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-292-4375
Spring Window Bolt

142924375
341A25-1067-03: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-459-6852
Catch Strike

144596852
A10123-03-1000P002: RNCC: 3 | RNVC: 2
44021429: RNCC: 3 | RNVC: 2
44021429: RNCC: 5 | RNVC: 9

10 Dec 1992

5340-14-362-0031
Barrel Bolt

143620031
330A87-2987-00: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-412-2140
Catch Strike

144122140
332A22-1411-21: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-365-2578
Catch Strike

143652578
F773-23830: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-304-7678
Catch Strike

143047678
E4M253-21-08: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-345-1759
Catch Strike

143451759
FD1B292-50970: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-428-7328
Catch Strike

144287328
AC.113-CH: RNCC: 3 | RNVC: 2
AC113CH: RNCC: 5 | RNVC: 2

15 Dec 1988

5340-14-369-9402
Catch Strike

143699402
1600-10-020: RNCC: 3 | RNVC: 2
160010020: RNCC: 5 | RNVC: 2
1600-10-020: RNCC: 5 | RNVC: 2
1600-10-020: RNCC: 5 | RNVC: 2

18 May 1981

5340-14-303-1331
Catch Strike

143031331
M3C281-18-922: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-385-9255
Catch Strike

143859255
AY861-57: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-345-1785
Catch Strike

143451785
FF1B220-31: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-383-0466
Barrel Bolt

143830466
NO PRIMARY REF14-383-0466: RNCC: 3 | RNVC: 2
16932639: RNCC: 5 | RNVC: 9

17 Mar 1983

5340-14-291-2363
Catch Strike

142912363
100275-101005: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-479-0253
Catch Strike

144790253
235140: RNCC: 2 | RNVC: 2
A01437-02-0000P005: RNCC: 5 | RNVC: 2
RU370-0412M11P13: RNCC: 5 | RNVC: 2
324457-001: RNCC: 5 | RNVC: 9

6 Dec 1995

5340-14-256-7935
Bumper

142567935
0607737700: RNCC: 3 | RNVC: 2
0607737700: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-400-3378
Access Cover

144003378
39057061: RNCC: 3 | RNVC: 2
39057061: RNCC: 5 | RNVC: 2

24 Apr 1985

5340-14-252-5462
Mending Plate

142525462
0901141A: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-483-4139
Blank Panel

144834139
TOL00786: RNCC: 3 | RNVC: 2

12 Sep 1996

5340-14-541-9760
Access Cover

145419760
20021-308: RNCC: 3 | RNVC: 2
502106015014A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-462-9011
Rod End Clevis

144629011
1DM165003: RNCC: 3 | RNVC: 2
91714225: RNCC: 5 | RNVC: 2

5 May 1993

5340-14-503-5903
Mounting Plate

145035903
47029407: RNCC: 3 | RNVC: 2

21 Jan 1998

5340-14-504-7257
Bumper

145047257
5010146392: RNCC: 3 | RNVC: 2

2 Mar 1998

5340-14-493-6608
Block Clamp

144936608
ALZ187530104001: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-439-5162
Webbing Strap

144395162
006569080P: RNCC: 3 | RNVC: 2

11 May 1990

5340-14-536-5871
Access Cover

145365871
61229794AA: RNCC: 3 | RNVC: 2

2 Sep 2003

5340-14-245-1548
Anchor Strap

142451548
70483405: RNCC: 3 | RNVC: 2
483405: RNCC: 5 | RNVC: 9
70483405: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-284-5485
Access Cover

142845485
0249177020: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-401-1881
Anchor Strap

144011881
79025255: RNCC: 3 | RNVC: 2
79025255: RNCC: 5 | RNVC: 9

29 May 1985

5340-14-554-2544
Mounting Bracket

145542544
82111625000: RNCC: 3 | RNVC: 2

15 Jun 2007

5340-14-428-6266
Block Clamp

144286266
LB10111556022: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-536-1892
Access Cover

145361892
803229140114: RNCC: 3 | RNVC: 2

15 Jul 2003

5340-14-439-3628
Angle Bracket

144393628
DA2C612020804: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-439-2027
Mounting Bracket

144392027
39441353: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-555-2599
Access Cover

145552599
45681055: RNCC: 3 | RNVC: 2

17 Oct 2007

5340-14-391-0136
Access Cover

143910136
980569: RNCC: 3 | RNVC: 2
980569: RNCC: 5 | RNVC: 2
980569: RNCC: 5 | RNVC: 9

1 Mar 1984

5340-14-408-0567
Rod End Clevis

144080567
5993619: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-431-2596
Catch Strike

144312596
332A22-1412-29: RNCC: 3 | RNVC: 2
F300 0T 009 8490: RNCC: 5 | RNVC: 9

12 Apr 1989

5340-14-350-4509
Catch Strike

143504509
205509: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-348-0234
Catch Strike

143480234
AY823-280A: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-375-7802
Spring Window Bolt

143757802
341A25-1067-04: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-468-3711
Catch Strike

144683711
1081712E00: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-14-463-2219
Catch Strike

144632219
44021807: RNCC: 3 | RNVC: 2
44021807: RNCC: 5 | RNVC: 9

26 May 1993

5340-14-359-6648
Spring Window Bolt

143596648
ST406M63G33: RNCC: 3 | RNVC: 2

15 Oct 1979

5340-14-261-1819
Catch Strike

142611819
NO PRIMARY REF14-261-1819: RNCC: 3 | RNVC: 2
MA2-03-02-11: RNCC: 5 | RNVC: 2
MA2-03-02-11: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-459-6813
Catch Strike

144596813
44026672: RNCC: 3 | RNVC: 2
A10125-03-0000P005: RNCC: 3 | RNVC: 2
44026672: RNCC: 5 | RNVC: 9

10 Dec 1992

5340-14-374-0469
Catch Strike

143740469
216456: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-397-9635
Catch Strike

143979635
3511 998 30361: RNCC: 3 | RNVC: 2
13041-4: RNCC: 5 | RNVC: 9

31 Jan 1985

5340-14-386-8778
Flush Bolt

143868778
947: RNCC: 3 | RNVC: 9

24 Aug 1983

5340-14-417-6854
Catch Strike

144176854
701450001130: RNCC: 3 | RNVC: 2
RMC7014-50: RNCC: 5 | RNVC: 9
104015131120: RNCC: 5 | RNVC: 9

22 Jul 1987

5340-14-348-6715
Spring Window Bolt

143486715
002701210M: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-14-454-6950
Spring Window Bolt

144546950
2085-02-047: RNCC: 3 | RNVC: 2
89411609: RNCC: 5 | RNVC: 9

9 Apr 1992

5340-14-354-3390
Barrel Bolt

143543390
202560: RNCC: 3 | RNVC: 2

31 Jan 1979

5340-14-339-3344
Catch Strike

143393344
191404: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-466-7520
Catch Strike

144667520
AC103AIB: RNCC: 3 | RNVC: 2
91396354: RNCC: 5 | RNVC: 2

24 Nov 1993

5340-14-382-6574
Flush Bolt

143826574
365A25-3096-01: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-346-1670
Catch Strike

143461670
706A31-6100-02: RNCC: 1 | RNVC: 2
08-52-817-400: RNCC: 3 | RNVC: 2
08-52-817-400: RNCC: 5 | RNVC: 2
0852817400: RNCC: 5 | RNVC: 2
20616D50: RNCC: 5 | RNVC: 9

12 Dec 1977

5340-14-423-9292
Catch Strike

144239292
AC.159-ZB: RNCC: 3 | RNVC: 2
AC159ZB: RNCC: 5 | RNVC: 2
4CR129ZB: RNCC: 5 | RNVC: 2
85-693-7925: RNCC: 6 | RNVC: 9

5 May 1988

5340-14-463-2226
Catch Strike

144632226
44021426: RNCC: 3 | RNVC: 2
44021426: RNCC: 5 | RNVC: 9

26 May 1993

5340-14-352-7171
Catch Strike

143527171
AC134BR: RNCC: 3 | RNVC: 2
AC.134-BR: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-418-1216
Catch Strike

144181216
059446T01TRA: RNCC: 3 | RNVC: 2
059446T: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-339-3185
Catch Strike

143393185
AC103ZB: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-463-2225
Catch Strike

144632225
44021422: RNCC: 3 | RNVC: 2
44021422: RNCC: 5 | RNVC: 9

26 May 1993

5340-14-379-3899
Catch Strike

143793899
NO PRIMARY REF14-379-3899: RNCC: 3 | RNVC: 2
345-67513-0: RNCC: 5 | RNVC: 9
345675130: RNCC: 5 | RNVC: 9

1 Oct 1982

5340-14-412-2188
Catch Strike

144122188
332A25-1056-20: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-521-0726
Barrel Bolt

145210726
33-43633: RNCC: 3 | RNVC: 2
K011499 ITEM 18: RNCC: 5 | RNVC: 2
K011499/18: RNCC: 5 | RNVC: 2
K011499 ITEM 18: RNCC: 5 | RNVC: 2
K011499/18: RNCC: 5 | RNVC: 2
K011499IT18: RNCC: 5 | RNVC: 2
33.43633: RNCC: 5 | RNVC: 2

5 Jul 2000

5340-14-283-3751
Catch Strike

142833751
F221-23838: RNCC: 3 | RNVC: 2
F221-23-838: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-541-8633
Catch Strike

145418633
350A25-1516-20: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-414-3955
Catch Strike

144143955
DA1D230321460A2: RNCC: 3 | RNVC: 2

28 Jan 1987

5340-14-533-2957
Catch Strike

145332957
12-725-159: RNCC: 3 | RNVC: 2
SZ12.725.159: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-304-6716
Catch Strike

143046716
AC.113-IP: RNCC: 3 | RNVC: 2
0196014N00: RNCC: 5 | RNVC: 2
AC113IP: RNCC: 5 | RNVC: 2
196014N: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-384-4214
Catch Strike

143844214
AC.149-IB: RNCC: 3 | RNVC: 2
AC149IB: RNCC: 5 | RNVC: 2
2167 4263-611: RNCC: 5 | RNVC: 2

4 May 1983

5340-14-365-2604
Catch Strike

143652604
R4A242-41-920: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-433-8452
Catch Strike

144338452
023094S: RNCC: 3 | RNVC: 2

16 Aug 1989

5340-14-337-6637
Catch Strike

143376637
0556101300: RNCC: 3 | RNVC: 2
0556101300: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-14-435-6892
Catch Strike

144356892
AC156ZB: RNCC: 3 | RNVC: 2
0206072X00: RNCC: 5 | RNVC: 2
7G124: RNCC: 5 | RNVC: 2

20 Nov 1989

5340-14-348-6505
Catch Strike

143486505
5403554H: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-14-389-1188
Spring Window Bolt

143891188
3160S73-38-210: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-457-5075
Catch Strike

144575075
625212: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-381-5223
Catch Strike

143815223
7006-50: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-360-7203
Catch Strike

143607203
BAZ95546: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-339-7397
Catch Strike

143397397
AC.132-ZB: RNCC: 3 | RNVC: 2
AC132ZB: RNCC: 5 | RNVC: 2

18 Jan 1977

5340-14-286-4693
Catch Strike

142864693
341A25-1079-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-473-7002
Catch Strike

144737002
350A25-1265-24: RNCC: 3 | RNVC: 2

9 Jan 1995

5340-14-551-6932
Spring Window Bolt

145516932
0844905: RNCC: 3 | RNVC: 2
08-44905: RNCC: 3 | RNVC: 9

17 Oct 2006

5340-14-338-6919
Catch Strike

143386919
0607596800: RNCC: 3 | RNVC: 2
0607596800: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-283-3366
Catch Strike

142833366
F221-22-08: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-280-1500
Catch Strike

142801500
233-92-92: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-475-8614
Catch Strike

144758614
M4HZ7101917020: RNCC: 3 | RNVC: 2

10 May 1995

5340-14-534-6045
Catch Strike

145346045
S521A1051115: RNCC: 3 | RNVC: 2

26 Mar 2003

5340-14-463-2224
Catch Strike

144632224
44021425: RNCC: 3 | RNVC: 2
44021425: RNCC: 5 | RNVC: 9

26 May 1993

5340-14-527-0770
Catch Strike

145270770
5001821516: RNCC: 3 | RNVC: 2

1 Oct 2001

5340-14-388-8781
Spring Window Bolt

143888781
360A87-1064-20: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-225-8619
Catch Strike

142258619
3160S25-26-115: RNCC: 3 | RNVC: 2
3160-25-26-115: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-258-4292
Catch Strike

142584292
AC.111-BR: RNCC: 3 | RNVC: 2
AC111BR: RNCC: 3 | RNVC: 2
111: RNCC: 5 | RNVC: 2
202217: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-469-1870
Catch Strike

144691870
1067416T00: RNCC: 3 | RNVC: 2

13 Apr 1994

5340-14-406-1222
Catch Strike

144061222
3511 245 11012: RNCC: 3 | RNVC: 2
3511-245-11012: RNCC: 5 | RNVC: 2

8 Jan 1986

5340-14-444-6403
Barrel Bolt

144446403
16-1-3647: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-14-327-7849
Barrel Bolt

143277849
J36-390-60LAIT0N: RNCC: 2 | RNVC: 2
TR1-60LAIT0N: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-279-5537
Catch Strike

142795537
233-92-304-06: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-503-3125
Catch Strike

145033125
8000823619: RNCC: 3 | RNVC: 2

9 Jan 1998

5340-14-483-3546
Catch Strike

144833546
6202017601: RNCC: 3 | RNVC: 2
F300 0T 021 9581: RNCC: 5 | RNVC: 9

5 Sep 1996

5340-14-361-6016
Catch Strike

143616016
16293832: RNCC: 3 | RNVC: 2
16293832: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-14-287-2345
Catch Strike

142872345
1000071: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-423-9158
Quick Release Pin

144239158
122-11: RNCC: 3 | RNVC: 2

5 May 1988

5340-14-259-5140
Mounting Plate

142595140
RU761-43M335-1P2: RNCC: 3 | RNVC: 2
761-43M335-1P2: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-281-7198
Clamping Catch

142817198
NO PRIMARY REF14-281-7198: RNCC: 3 | RNVC: 2
BF5-4: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-425-8581
Rod End Clevis

144258581
17151: RNCC: 3 | RNVC: 2
85-693-6648: RNCC: 6 | RNVC: 9

26 Jul 1988

5340-14-402-0706
Anchor Strap

144020706
PAA55-03: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-332-1533
Access Door Hinge

143321533
PAA15-05-023: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-480-9371
Access Cover

144809371
COL750-3/200F029: RNCC: 3 | RNVC: 2
91768754: RNCC: 5 | RNVC: 2

11 Apr 1996

5340-14-372-3556
Retaining Strap

143723556
21C6559: RNCC: 3 | RNVC: 2
N102E151-04-66: RNCC: 5 | RNVC: 2

1 Sep 1981

5340-14-442-1216
Expansion Plug

144421216
3740-18: RNCC: 3 | RNVC: 2
9555936480: RNCC: 5 | RNVC: 2

2 Oct 1990

5340-14-201-9665
Bumper

142019665
NO PRIMARY REF14-201-9665: RNCC: 3 | RNVC: 2
1-2A2: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-14-430-4766
Butt Hinge

144304766
25110A1-135: RNCC: 2 | RNVC: 2

22 Mar 1989

5340-14-379-0619
Cover Strip

143790619
3160S25-29-080-51: RNCC: 3 | RNVC: 2
3160S-25-29-080-51: RNCC: 5 | RNVC: 2

6 Sep 1982

5340-14-324-9981
Anchor Strap

143249981
121E95-201-05-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-361-9237
Bumper

143619237
501-990-931-0: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-347-6385
Loop Clamp

143476385
3-2633-02-40A: RNCC: 3 | RNVC: 2
3-2633-02-40A: RNCC: 5 | RNVC: 9
3-2633-02-40: RNCC: 5 | RNVC: 9

1 Mar 1978

5340-14-389-4301
Flush Catch Claw

143894301
360A87-1131-00: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-324-4489
Pipe Hanger

143244489
121E52-443-20-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-205-9286
Flush Catch Claw

142059286
2228-52-12-00-17: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-407-7547
Cane Bolt

144077547
16299022: RNCC: 1 | RNVC: 2
A01074-08-0000P001: RNCC: 3 | RNVC: 2
0072268P00: RNCC: 5 | RNVC: 2
16299022: RNCC: 5 | RNVC: 9

3 Mar 1986

5340-14-369-9165
Access Cover

143699165
A2000-1-16: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-370-2423
Pipe Hanger

143702423
304-000-201-0: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-527-1060
Access Cover

145271060
21234764-00: RNCC: 3 | RNVC: 2
21234764-0: RNCC: 5 | RNVC: 2

3 Oct 2001

5340-14-299-5964
Mounting Bracket

142995964
501-709-678-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-213-9266
Synchro Clamp

142139266
S2180-1DG: RNCC: 3 | RNVC: 2
S2180-1: RNCC: 5 | RNVC: 2
2180-1: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-523-4037
Vent Plug

145234037
803481050105: RNCC: 3 | RNVC: 2
SDM803481050105: RNCC: 5 | RNVC: 9

17 Jan 2001

5340-14-413-6182
Rim Latch Set

144136182
116005: RNCC: 3 | RNVC: 2

5 Jan 1987

5340-14-348-6732
Casement Fastener

143486732
002678210M: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-14-377-8145
Butt Hinge

143778145
1-60X50GAUCHELAIT0N: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-216-7239
Handwheel

142167239
NO PRIMARY REF14-216-7239: RNCC: 3 | RNVC: 2
NF01761: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-418-3295
Angle Bracket

144183295
3-451406: RNCC: 3 | RNVC: 9
3-451406: RNCC: 5 | RNVC: 2
2185600: RNCC: 5 | RNVC: 2
3-451406: RNCC: 5 | RNVC: 9

12 Aug 1987

5340-14-318-3133
Mending Plate

143183133
26-810040-9: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-510-9382
Loop Clamp

145109382
HRS-2-S-26.6-PP: RNCC: 3 | RNVC: 9

23 Nov 1998

5340-14-520-7623
Angle Bracket

145207623
47176464: RNCC: 3 | RNVC: 2

14 Jun 2000

5340-14-280-0664
Rod End Connector

142800664
GA51374: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-283-6708
Loop Clamp

142836708
53952-8: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-488-4150
Anchor Strap

144884150
48440-2: RNCC: 3 | RNVC: 2

7 May 1997

5340-14-266-1714
Eye Hook

142661714
9137805: RNCC: 3 | RNVC: 2
9137805: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-525-0911
Stand Base

145250911
3272-380-000: RNCC: 3 | RNVC: 2
3272-380-000: RNCC: 5 | RNVC: 2

18 May 2001

5340-14-537-1219
Mounting Bracket

145371219
97129-162244021: RNCC: 3 | RNVC: 2

1 Oct 2003

5340-14-370-1543
Tubular Fairlead

143701543
MY20221-2501: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-395-5531
Handle Grip

143955531
5-1881B43152-1457: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-403-3343
Flush Catch Claw

144033343
206375: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-451-7700
Quick Release Pin

144517700
37250: RNCC: 3 | RNVC: 2

4 Dec 1991

5340-14-481-3276
Mounting Bracket

144813276
23241389-9: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-362-3819
Strap Hinge

143623819
0611-17: RNCC: 3 | RNVC: 2
4-100530: RNCC: 5 | RNVC: 2

19 Mar 1980

5340-14-472-3054
Loop Clamp

144723054
202C272-13-0: RNCC: 3 | RNVC: 9

19 Oct 1994

5340-14-208-6476
Loop Clamp

142086476
NO PRIMARY REF14-208-6476: RNCC: 3 | RNVC: 2
99001420: RNCC: 5 | RNVC: 2
387137: RNCC: 5 | RNVC: 2
M208-27107: RNCC: 5 | RNVC: 2
12230108-3: RNCC: 5 | RNVC: 2
6303: RNCC: 5 | RNVC: 9
99001420: RNCC: 5 | RNVC: 9
99001420: RNCC: 5 | RNVC: 9
387137: RNCC: 6 | RNVC: 9

1 Jan 1964

5340-14-364-0929
Retaining Strap

143640929
501-804-669-0: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-396-3345
Strap Fastener Loop

143963345
A2068-02: RNCC: 3 | RNVC: 9

27 Nov 1984

5340-14-433-3104
Mounting Bracket

144333104
853-202-492-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-14-353-7419
Bow Handle

143537419
19-1-3415: RNCC: 3 | RNVC: 2
19-5-3415: RNCC: 5 | RNVC: 2

16 Jan 1979

5340-14-358-2536
Rod End Connector

143582536
45116-367-690: RNCC: 3 | RNVC: 2
45116-367-690: RNCC: 5 | RNVC: 2

13 Aug 1979

5340-14-561-6736
Utility Resilient Mount

145616736
C5H610CIM: RNCC: 3 | RNVC: 2
C5H-610-CIM: RNCC: 5 | RNVC: 2

19 Aug 2009

5340-14-465-7685
Loop Clamp

144657685
354100652: RNCC: 3 | RNVC: 2
35R6,5: RNCC: 3 | RNVC: 2
Z00.N7141380065: RNCC: 5 | RNVC: 2

14 Oct 1993

5340-14-354-3171
Rod End Connector

143543171
16321162: RNCC: 3 | RNVC: 2
16321162: RNCC: 5 | RNVC: 9

30 Jan 1979

5340-14-357-0493
Flush Catch Claw

143570493
388843: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-339-5423
Mending Plate

143395423
3130S23-11-019: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-474-2186
Pipe Hanger

144742186
VIP-156N: RNCC: 3 | RNVC: 2

1 Feb 1995

5340-14-479-0646
Bridge Clamp

144790646
23223161-4: RNCC: 3 | RNVC: 2

13 Dec 1995

5340-14-525-6899
Mounting Plate

145256899
20 242 160 6890: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-433-4337
Mounting Bracket

144334337
0868585A00: RNCC: 3 | RNVC: 2

25 Jul 1989

5340-14-315-1726
Angle Bracket

143151726
205216: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-359-5803
Leaf Spring

143595803
0038722706: RNCC: 3 | RNVC: 2
0038722706: RNCC: 5 | RNVC: 9

15 Oct 1979

5340-14-457-5237
Angle Bracket

144575237
5000711447: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-419-2876
Retaining Strap

144192876
ST406M52P702: RNCC: 3 | RNVC: 2

16 Oct 1987

5340-14-462-1554
Mounting Plate

144621554
LN214001TA09: RNCC: 3 | RNVC: 2
LN21400REPIA09: RNCC: 3 | RNVC: 2
RAB0577: RNCC: 5 | RNVC: 2
RAB0871: RNCC: 5 | RNVC: 2

7 Apr 1993

5340-14-433-0255
Angle Bracket

144330255
402402T: RNCC: 3 | RNVC: 2

5 Jul 1989

5340-14-381-7864
Mounting Plate

143817864
16761571: RNCC: 3 | RNVC: 2
16761571: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-539-5702
Mounting Plate

145395702
10612060: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-500-4061
Loop Clamp

145004061
14300390C: RNCC: 3 | RNVC: 2
F300 0T 024 4162: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-409-0762
Webbing Strap

144090762
4771621710: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-511-0812
Door Handle

145110812
2442007: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-14-541-4602
Metal Grille

145414602
MB5335F00: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-502-0374
Angle Bracket

145020374
K2072971: RNCC: 3 | RNVC: 2
72971: RNCC: 5 | RNVC: 2

26 Nov 1997

5340-14-526-2068
Snap Hook

145262068
2336: RNCC: 3 | RNVC: 2

11 Jul 2001

5340-14-460-0131
Angle Bracket

144600131
39449874: RNCC: 3 | RNVC: 2
39449874: RNCC: 5 | RNVC: 9

7 Jan 1993

5340-14-520-5326
Mounting Plate

145205326
T1196AA16: RNCC: 3 | RNVC: 2
T1196AA16: RNCC: 5 | RNVC: 9

22 May 2000

5340-14-460-5215
Pawl Fastener

144605215
1048CAME1048-4: RNCC: 3 | RNVC: 2

27 Jan 1993

5340-14-423-0618
Mounting Bracket

144230618
39529977: RNCC: 3 | RNVC: 2
39529977: RNCC: 5 | RNVC: 9

31 Mar 1988

5340-14-536-1900
Mounting Bracket

145361900
803237130110: RNCC: 3 | RNVC: 2

15 Jul 2003

5340-14-517-8657
Mounting Bracket

145178657
92 020 02 0300: RNCC: 3 | RNVC: 2

14 Jan 2000

5340-14-470-5372
Loop Clamp

144705372
10221462: RNCC: 1 | RNVC: 3
RBI918CC: RNCC: 3 | RNVC: 3

22 Jun 1994

5340-14-515-9264
Loop Clamp

145159264
821N12: RNCC: 3 | RNVC: 2

26 Aug 1999

5340-14-438-8870
Quick Release Pin

144388870
2678-212M19P16: RNCC: 3 | RNVC: 2

11 Apr 1990

5340-14-516-8471
Mounting Bracket

145168471
101160102090: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-14-532-3437
Swivel Caster

145323437
19311: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-521-1585
Recess Handle

145211585
P2-53: RNCC: 3 | RNVC: 2
P2-53: RNCC: 3 | RNVC: 2

12 Jul 2000

5340-14-440-3297
Mounting Bracket

144403297
332A65-1152-00: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-296-1256
Lock-Release Lever

142961256
341A25-1117-21: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-287-3665
Angle Bracket

142873665
121E22-360-09-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-371-5535
Utility Access Door

143715535
366A25-0020-0201: RNCC: 3 | RNVC: 2

14 Mar 1996

5340-14-325-6645
Plug Button

143256645
050A57-520631Q: RNCC: 3 | RNVC: 2
0520631Q00: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-532-6667
Butt Hinge

145326667
52-1-3694: RNCC: 3 | RNVC: 2
369941: RNCC: 5 | RNVC: 2

27 Nov 2002

5340-14-437-0345
Access Cover

144370345
66835-2: RNCC: 3 | RNVC: 2
66835-2E: RNCC: 5 | RNVC: 2

16 Jan 1990

5340-14-430-9060
Retaining Strap

144309060
158080: RNCC: 3 | RNVC: 9
89410732: RNCC: 5 | RNVC: 2
158080: RNCC: 5 | RNVC: 9

29 Mar 1989

5340-14-277-3863
Angle Bracket

142773863
85738: RNCC: 3 | RNVC: 2
85738: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-434-0155
Mounting Plate

144340155
RP981306: RNCC: 3 | RNVC: 2

29 Aug 1989

5340-14-498-3638
Doorknob

144983638
403055: RNCC: 3 | RNVC: 2
91957949: RNCC: 3 | RNVC: 2
313477-313478: RNCC: 3 | RNVC: 2
F300 0T 004 9548: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-502-5209
Mounting Bracket

145025209
5000676570: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-369-9529
Retaining Strap

143699529
398102170019: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-555-5579
Arched Cushion

145555579
PM1A526060703: RNCC: 3 | RNVC: 2
PM1A526060703: RNCC: 5 | RNVC: 2

27 Nov 2007

5340-14-361-5648
Pipe Hanger

143615648
24053112400: RNCC: 3 | RNVC: 2
240531124: RNCC: 5 | RNVC: 9

24 Jan 1980

5340-14-500-4586
Loop Clamp

145004586
RSGU1-12/15-W5: RNCC: 3 | RNVC: 2
RSGU1-12-15W5: RNCC: 5 | RNVC: 2
RSGU1-12-15-W5: RNCC: 5 | RNVC: 2
RSGU1-12-15W5: RNCC: 5 | RNVC: 2
RSGU1-12/15-W5: RNCC: 5 | RNVC: 2
91729074: RNCC: 5 | RNVC: 2
F300 0T 024 4755: RNCC: 6 | RNVC: 9
F300 0T 025 1253: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-286-8856
Lock-Release Lever

142868856
A10-21-496-02-0: RNCC: 3 | RNVC: 2
A10-21-496-02-0: RNCC: 5 | RNVC: 2
A10-21-496-02-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-339-0238
Snap Hook

143390238
BN339-506M06-0-150: RNCC: 2 | RNVC: 2
2122BN331503: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-545-4959
Mounting Plate

145454959
889-404-043-0: RNCC: 3 | RNVC: 2

14 Apr 2005

5340-14-339-5391
Rod End Connector

143395391
3130S21-23-003: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-370-7363
Loop Clamp

143707363
676-15799-01: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-261-3088
Rod End Connector

142613088
175-84-117: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-459-1567
Mounting Plate

144591567
16787459: RNCC: 3 | RNVC: 2

19 Nov 1992

5340-14-378-8413
Angle Bracket

143788413
A11A221376121: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-532-3782
Mounting Bracket

145323782
RA1M701586813A1: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-504-8563
Mounting Plate

145048563
20053462: RNCC: 3 | RNVC: 2

6 Mar 1998

5340-14-474-6734
Mending Plate

144746734
29779544: RNCC: 3 | RNVC: 9

22 Feb 1995

5340-14-497-3546
Retaining Strap

144973546
4769810310: RNCC: 3 | RNVC: 2
F300 0T 023 0493: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-409-0926
Anchor Strap

144090926
4771620120: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-407-8060
Retaining Strap

144078060
0279947460: RNCC: 3 | RNVC: 2

5 Mar 1986

5340-14-533-7558
Access Cover

145337558
F1263340: RNCC: 3 | RNVC: 2

21 Feb 2003

5340-14-508-0474
Webbing Strap

145080474
4773221530: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-474-2771
Webbing Strap

144742771
4180662: RNCC: 3 | RNVC: 2

8 Feb 1995

5340-14-314-5351
Access Door Hinge

143145351
101822: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-542-3006
Mounting Bracket

145423006
972546608: RNCC: 3 | RNVC: 2
972546608: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-553-6865
Mounting Bracket

145536865
82047155001: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-545-9376
Access Cover

145459376
715170: RNCC: 3 | RNVC: 2

30 May 2005

5340-14-416-6875
Angle Bracket

144166875
413002020010: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-336-7118
Angle Bracket

143367118
189340: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-362-5247
Retaining Strap

143625247
158583: RNCC: 3 | RNVC: 2

19 Mar 1980

5340-14-513-0594
Webbing Strap

145130594
009603035P: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-14-394-8384
Rod End Connector

143948384
M4ZS331D2041: RNCC: 3 | RNVC: 9

2 Oct 1984

5340-14-425-8890
Anchor Strap

144258890
059278T01TRA: RNCC: 3 | RNVC: 2
059278T: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-14-480-1548
Loop Clamp

144801548
MPMH38-0: RNCC: 3 | RNVC: 2
77092317: RNCC: 5 | RNVC: 2
91660013: RNCC: 5 | RNVC: 2

21 Feb 1996

5340-14-320-2927
Access Cover

143202927
0064710380: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-496-3999
Access Cover

144963999
198114: RNCC: 3 | RNVC: 2
F300 0T 021 4880: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-501-6299
Mounting Bracket

145016299
1060110: RNCC: 3 | RNVC: 2

5 Nov 1997

5340-14-380-7166
Access Cover

143807166
317096: RNCC: 3 | RNVC: 2
317096: RNCC: 5 | RNVC: 9

29 Nov 1982

5340-14-512-8491
Mounting Bracket

145128491
222198: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-401-5284
Loop Clamp

144015284
52200010012: RNCC: 3 | RNVC: 2
310N12: RNCC: 5 | RNVC: 2

13 Jun 1985

5340-14-335-2905
Angle Bracket

143352905
196761: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-444-9330
Mounting Plate

144449330
572419: RNCC: 3 | RNVC: 2

29 Jan 1991

5340-14-537-4462
Mounting Bracket

145374462
MECZ7023: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-500-9301
Mounting Plate

145009301
E68400000004: RNCC: 3 | RNVC: 2
F300 0T 024 9513: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-417-3185
Rigid Caster

144173185
543235: RNCC: 3 | RNVC: 2
00543235: RNCC: 5 | RNVC: 2

1 Jul 1987

5340-14-461-9220
Loop Clamp

144619220
T700A3240025100: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-480-3647
Mounting Plate

144803647
1087026X00: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-480-6304
Mounting Bracket

144806304
2022191: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-469-8529
Loop Clamp

144698529
124722-59050: RNCC: 3 | RNVC: 2

13 May 1994

5340-14-401-1010
Mending Plate

144011010
607166: RNCC: 3 | RNVC: 2

29 May 1985

5340-14-505-6807
Mounting Plate

145056807
BFX3000TBSP2: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-536-8707
Mounting Bracket

145368707
030436: RNCC: 3 | RNVC: 2
30436: RNCC: 5 | RNVC: 2

17 Sep 2003

5340-14-293-3794
Threaded Rod End

142933794
0025277020: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-362-0132
Bail Handle

143620132
23083419-9: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-522-4613
Mounting Plate

145224613
747407: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-14-472-5397
Mounting Bracket

144725397
9301190046: RNCC: 3 | RNVC: 2

28 Oct 1994

5340-14-349-2644
Retaining Strap

143492644
1144163: RNCC: 3 | RNVC: 2
1144163: RNCC: 5 | RNVC: 2

22 May 1978

5340-14-277-7363
Mending Plate

142777363
C241158: RNCC: 3 | RNVC: 2
540198: RNCC: 5 | RNVC: 2
26241158: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-380-5434
Loop Clamp

143805434
511119050241: RNCC: 3 | RNVC: 2
35P24: RNCC: 5 | RNVC: 2

29 Nov 1982

5340-14-523-6606
Mounting Plate

145236606
G5443301: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-222-7105
Bow Handle

142227105
0000651957: RNCC: 3 | RNVC: 2
0000651957: RNCC: 5 | RNVC: 9
651957: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-413-9632
Retaining Strap

144139632
ST400S60P156: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-412-9565
Retaining Strap

144129565
C58000-261: RNCC: 3 | RNVC: 2

5 Nov 1986

5340-14-546-8592
Aircraft Latch Hook

145468592
S711A1011155: RNCC: 1 | RNVC: 2
TL100053-109: RNCC: 3 | RNVC: 2

30 Aug 2005

5340-14-523-5692
Bow Handle

145235692
621-110: RNCC: 3 | RNVC: 2

29 Jan 2001

5340-14-435-9943
Mounting Plate

144359943
085-40-021: RNCC: 3 | RNVC: 2

29 Nov 1989

5340-14-404-0458
Angle Bracket

144040458
366A52-1126-20: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-532-5008
Cover Strip

145325008
42-250-263: RNCC: 3 | RNVC: 2
SZ42.250.263: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-14-542-0757
Mounting Bracket

145420757
ACS2-11-810: RNCC: 3 | RNVC: 2

2 Jul 2004

5340-14-360-8120
Bow Handle

143608120
6232-0804: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-257-1381
Sliding Door Track

142571381
330A21-2010-21: RNCC: 3 | RNVC: 2
330A21-2010-2100: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-411-1709
Butt Hinge

144111709
332A25-1024-35: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-467-6074
Loop Clamp

144676074
0213660230: RNCC: 3 | RNVC: 2

19 Jan 1994

5340-14-541-3568
Mounting Bracket

145413568
21169188-00: RNCC: 3 | RNVC: 2

3 Jun 2004

5340-14-447-1089
Mounting Plate

144471089
110-421-56-01: RNCC: 3 | RNVC: 2

3 May 1991

5340-14-541-5131
Mounting Bracket

145415131
1091378-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-349-1617
Access Cover

143491617
341A65-7703-00: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-14-404-0477
Angle Bracket

144040477
366A54-1107-24: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-344-0610
Butt Hinge

143440610
1554-1041A: RNCC: 3 | RNVC: 2

13 Jul 1977

5340-14-363-1592
Loop Clamp

143631592
556185: RNCC: 3 | RNVC: 2
556185-00: RNCC: 5 | RNVC: 2
SOG556185: RNCC: 5 | RNVC: 9

3 Apr 1980

5340-14-505-1293
Loop Clamp

145051293
161211: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-364-5882
Loop Clamp

143645882
NO PRIMARY REF14-364-5882: RNCC: 3 | RNVC: 2
5000497744: RNCC: 5 | RNVC: 2
535-21883: RNCC: 5 | RNVC: 9
5000497744: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-366-9290
Rim Lock Set

143669290
NO PRIMARY REF14-366-9290: RNCC: 3 | RNVC: 2
138249: RNCC: 5 | RNVC: 2
138249: RNCC: 5 | RNVC: 9
2138249: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-464-9609
Mounting Plate

144649609
365A52-1237-20: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-272-5763
Butt Hinge

142725763
160-10013-98: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-270-5137
Rod End Connector

142705137
DLT046803: RNCC: 3 | RNVC: 2
DLT046803: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-548-1697
Pin Removable Head

145481697
69013038: RNCC: 3 | RNVC: 2

13 Dec 2005

5340-14-442-9582
Bridge Clamp

144429582
038037G: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-14-505-1247
Mounting Plate

145051247
45084460: RNCC: 3 | RNVC: 9
45084460: RNCC: 5 | RNVC: 2

11 Mar 1998

5340-14-479-4056
Section Block Clamp

144794056
RA1M210108383: RNCC: 3 | RNVC: 2

10 Jan 1996

5340-14-228-7843
Angle Bracket

142287843
75341A: RNCC: 3 | RNVC: 9
062075341: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-226-1875
Loop Clamp

142261875
511131050132: RNCC: 3 | RNVC: 2
55G13: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-468-1369
Access Cover

144681369
554434: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-238-9236
Retaining Strap

142389236
E00268-68: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-435-7631
Mounting Plate

144357631
21350562-00: RNCC: 3 | RNVC: 2

22 Nov 1989

5340-14-405-2889
Angle Bracket

144052889
NO PRIMARY REF14-405-2889: RNCC: 3 | RNVC: 2
D10-44652: RNCC: 5 | RNVC: 9

27 Nov 1985

5340-14-523-9191
Safety Cable Kit

145239191
21233882-00: RNCC: 3 | RNVC: 2

14 Feb 2001

5340-14-319-8429
Bow Handle

143198429
77891-59: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-405-4504
Loop Clamp

144054504
514119050105: RNCC: 3 | RNVC: 2
38PT10: RNCC: 5 | RNVC: 2
85-693-1688: RNCC: 6 | RNVC: 9

27 Nov 1985

5340-14-332-9323
Butt Hinge

143329323
M208-27094: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-389-4582
Bumper

143894582
365A55-3111-35: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-361-2492
Retaining Strap

143612492
H14203-26: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-418-2328
Loop Clamp

144182328
16043382: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-460-0762
Rod End Connector

144600762
PM1A725374410: RNCC: 3 | RNVC: 2
PM1A725374410: RNCC: 5 | RNVC: 2

7 Jan 1993

5340-14-397-1686
Swivel Caster

143971686
SP4BA080-23L: RNCC: 3 | RNVC: 2
SP4BA80-23L: RNCC: 5 | RNVC: 2

1 Dec 1984

5340-14-380-6981
Clamp Bolt Assembly

143806981
NO PRIMARY REF14-380-6981: RNCC: 3 | RNVC: 2
0008031518: RNCC: 5 | RNVC: 9
5340-A1-000-0012: RNCC: 6 | RNVC: 9

29 Nov 1982

5340-14-529-1990
Metal Grille

145291990
457-10070-000: RNCC: 3 | RNVC: 2

15 Mar 2002

5340-14-569-2874
Utility Resilient Mount

145692874
BFN45-60E15: RNCC: 3 | RNVC: 2

31 Aug 2011

5340-14-529-5540
Mounting Bracket

145295540
330A32-5069-21: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-542-0732
Swivel Caster

145420732
VP5BC150-21B: RNCC: 3 | RNVC: 2

2 Jul 2004

5340-14-522-4715
Mounting Bracket

145224715
C0RF1-810-004: RNCC: 3 | RNVC: 2

31 Oct 2000

Load More Results