What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 22 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 22 of 446

5340-14-436-5908
Access Cover

144365908
BB5438: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-394-9127
Angle Bracket

143949127
20731920: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-474-5537
Access Cover

144745537
38020206: RNCC: 3 | RNVC: 2
38020206: RNCC: 5 | RNVC: 9

22 Feb 1995

5340-14-545-6991
Mounting Bracket

145456991
RA1A703786613: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-526-3687
Caster Frame

145263687
8027276E00: RNCC: 3 | RNVC: 2

25 Jul 2001

5340-14-455-8744
Mounting Plate

144558744
16662313: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-481-2161
Angle Bracket

144812161
5010113481: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-14-428-4511
Turnbuckle Body

144284511
36132UB24A054: RNCC: 2 | RNVC: 2

8 Dec 1988

5340-14-488-6789
Mounting Bracket

144886789
38660972: RNCC: 3 | RNVC: 2
38660972: RNCC: 5 | RNVC: 9

28 May 1997

5340-14-341-6816
Support Hook

143416816
311012: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-468-7771
Mounting Bracket

144687771
C0240A: RNCC: 3 | RNVC: 2
SW240A: RNCC: 5 | RNVC: 2

21 Mar 1994

5340-14-435-1063
Mounting Bracket

144351063
16849138: RNCC: 3 | RNVC: 2
16849138: RNCC: 5 | RNVC: 9

18 Oct 1989

5340-14-399-8700
Angle Bracket

143998700
1112148: RNCC: 3 | RNVC: 2
1112148: RNCC: 5 | RNVC: 2

11 Apr 1985

5340-14-248-9323
Rod End Clevis

142489323
08049S09: RNCC: 3 | RNVC: 9
08049S09: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-525-8007
Access Cover

145258007
F145952: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-450-4839
Plate Spacer

144504839
5172086400: RNCC: 3 | RNVC: 2
185014: RNCC: 5 | RNVC: 2

9 Oct 1991

5340-14-392-7759
Anchor Strap

143927759
71689: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-503-5887
Access Cover

145035887
47136060: RNCC: 3 | RNVC: 2

21 Jan 1998

5340-14-426-5600
Runner

144265600
39534073: RNCC: 3 | RNVC: 2
39534073: RNCC: 5 | RNVC: 9

8 Sep 1988

5340-14-533-8403
Access Cover

145338403
46945441: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-483-0685
Cover Strip

144830685
10441542: RNCC: 3 | RNVC: 2

8 Aug 1996

5340-14-409-9487
Anchor Strap

144099487
1312-72: RNCC: 3 | RNVC: 2
9123343780: RNCC: 5 | RNVC: 2
9123343780: RNCC: 5 | RNVC: 2

4 Jun 1986

5340-14-520-3142
Mounting Bracket

145203142
27138520-5: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-450-2130
Bumper

144502130
5003061014: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-362-0124
Bow Handle

143620124
23073942-7: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-422-6884
Quick Release Pin

144226884
5828243029: RNCC: 3 | RNVC: 2

15 Mar 1988

5340-14-355-8262
Runner

143558262
16448316: RNCC: 3 | RNVC: 2
16448316: RNCC: 3 | RNVC: 9

5 Apr 1979

5340-14-516-2128
Access Cover

145162128
0020151: RNCC: 3 | RNVC: 2

15 Sep 1999

5340-14-537-9051
Access Cover

145379051
10492641: RNCC: 3 | RNVC: 2

3 Dec 2003

5340-14-501-1131
Access Cover

145011131
2610049: RNCC: 3 | RNVC: 2
F300 0T 025 1527: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-335-9091
Anchor Strap

143359091
VDP0491: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-493-3090
Access Cover

144933090
601124: RNCC: 3 | RNVC: 2
F300 0T 012 1695: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-485-7232
Access Cover

144857232
4624097A: RNCC: 3 | RNVC: 2

6 Feb 1997

5340-14-545-3887
Access Cover

145453887
0102276B: RNCC: 3 | RNVC: 2

11 Apr 2005

5340-14-388-2063
Mending Plate

143882063
T8002MK4F20B: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-367-2160
Retaining Band

143672160
A64296: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-473-1057
Angle Bracket

144731057
38510295: RNCC: 3 | RNVC: 2
38510295: RNCC: 5 | RNVC: 9

7 Dec 1994

5340-14-502-0417
Access Cover

145020417
103089110901: RNCC: 3 | RNVC: 2
103089110901: RNCC: 5 | RNVC: 2

26 Nov 1997

5340-14-383-5295
Access Cover

143835295
18606437: RNCC: 3 | RNVC: 2
18606437: RNCC: 5 | RNVC: 2

11 Apr 1983

5340-14-545-5971
Loop Clamp

145455971
2203180316: RNCC: 3 | RNVC: 2

25 Apr 2005

5340-14-423-0835
Webbing Strap

144230835
160G242037: RNCC: 3 | RNVC: 2

31 Mar 1988

5340-14-479-3504
Kick Door Plate

144793504
AT100PE200401: RNCC: 3 | RNVC: 9

10 Jan 1996

5340-14-454-6869
Mounting Plate

144546869
61114: RNCC: 3 | RNVC: 2
89473424: RNCC: 5 | RNVC: 2

9 Apr 1992

5340-14-546-9176
Loop Clamp

145469176
719177: RNCC: 3 | RNVC: 2

7 Sep 2005

5340-14-548-7097
Mounting Bracket

145487097
53155902000: RNCC: 3 | RNVC: 2

1 Feb 2006

5340-14-371-1206
Angle Bracket

143711206
A11A221176531: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-537-9043
Mounting Plate

145379043
10441078: RNCC: 3 | RNVC: 2

3 Dec 2003

5340-14-433-9203
Plate Spacer

144339203
RP988789/2: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-14-505-3970
Synchro Clamp

145053970
12017013: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-424-6356
Lock Bolt

144246356
V3SD18129-1: RNCC: 3 | RNVC: 2
9560153550: RNCC: 5 | RNVC: 2
123399: RNCC: 5 | RNVC: 2
123399: RNCC: 5 | RNVC: 2
V3SD18129-1: RNCC: 5 | RNVC: 2

2 Jun 1988

5340-14-317-2268
Angle Bracket

143172268
76003: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-334-9564
Access Cover

143349564
419934: RNCC: 3 | RNVC: 2
419934: RNCC: 5 | RNVC: 2
419934: RNCC: 5 | RNVC: 9

2 Jun 1976

5340-14-522-9798
Mounting Bracket

145229798
0319780190: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-14-348-7032
Anchor Strap

143487032
1115302: RNCC: 3 | RNVC: 2
1115302: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-394-6457
Angle Bracket

143946457
79110189: RNCC: 3 | RNVC: 2
79110189: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-532-4497
Mounting Bracket

145324497
341A65-5104-72: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-312-0133
Mending Plate

143120133
001176228P: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-321-0070
Access Cover

143210070
15142585: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-323-8636
Mounting Plate

143238636
808: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-398-9686
Angle Bracket

143989686
574024510: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-418-9243
Rod End Clevis

144189243
DA2C111317815: RNCC: 3 | RNVC: 2

16 Sep 1987

5340-14-532-4353
Access Cover

145324353
F1249179: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-555-2208
Mounting Bracket

145552208
82361184000: RNCC: 3 | RNVC: 2

10 Oct 2007

5340-14-546-0787
Mounting Plate

145460787
072401002000987-F: RNCC: 3 | RNVC: 2

9 Jun 2005

5340-14-545-6923
Angle Bracket

145456923
RA1B703880131N1: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-550-4194
Angle Bracket

145504194
2714616120: RNCC: 3 | RNVC: 2

20 Jun 2006

5340-14-503-5599
Access Cover

145035599
FCFD00070: RNCC: 3 | RNVC: 2

21 Jan 1998

5340-14-488-2248
Section Block Clamp

144882248
435800000003: RNCC: 3 | RNVC: 2

23 Apr 1997

5340-14-528-8195
Mounting Plate

145288195
966192: RNCC: 3 | RNVC: 2

19 Feb 2002

5340-14-528-5477
Access Cover

145285477
335914: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-513-3593
Key Chain And Reel

145133593
60631265: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-14-457-8563
Anchor Strap

144578563
75985: RNCC: 3 | RNVC: 2

24 Sep 1992

5340-14-529-1521
Access Cover

145291521
457-01962-000: RNCC: 3 | RNVC: 2

13 Mar 2002

5340-14-431-6136
Runner

144316136
31401382: RNCC: 3 | RNVC: 9

26 Apr 1989

5340-14-284-6490
Strap Fastener Loop

142846490
386112: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-311-4057
Rod End Clevis

143114057
341A69-1235-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-449-6058
Pipe Hanger

144496058
0050-C0-01: RNCC: 3 | RNVC: 9

28 Aug 1991

5340-14-454-8974
Runner

144548974
2085-05-008: RNCC: 3 | RNVC: 2
89411692: RNCC: 5 | RNVC: 9

24 Apr 1992

5340-14-493-6468
Beam Gripping Clamp

144936468
J05085-02-0310P005: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-390-1513
Corner Brace

143901513
366A57-4137-00: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-428-8548
Mounting Bracket

144288548
AMX10-193-353-3A1: RNCC: 3 | RNVC: 2

22 Dec 1988

5340-14-366-1671
Rod End Clevis

143661671
4181239: RNCC: 3 | RNVC: 2
7443: RNCC: 5 | RNVC: 2
4181239: RNCC: 5 | RNVC: 9
7443: RNCC: 5 | RNVC: 9
85-689-9155: RNCC: 6 | RNVC: 9

4 Nov 1980

5340-14-418-0233
Angle Bracket

144180233
5097-13: RNCC: 3 | RNVC: 2
7910033988: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-532-1002
Angle Bracket

145321002
1SH41767222: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-542-2384
Loop Clamp

145422384
700864623: RNCC: 3 | RNVC: 2
700864623: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-533-9497
Snap Hook

145339497
4030-30ST: RNCC: 3 | RNVC: 2
1071799M00: RNCC: 5 | RNVC: 2

5 Mar 2003

5340-14-387-3231
Control Rod

143873231
710050-21: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-14-431-9277
Bumper

144319277
0880065E03: RNCC: 3 | RNVC: 2
0880065E02: RNCC: 5 | RNVC: 9

16 May 1989

5340-14-489-2059
Mounting Bracket

144892059
414-0113-011: RNCC: 3 | RNVC: 2

2 Jul 1997

5340-14-409-9120
Rigid Caster

144099120
0396166: RNCC: 3 | RNVC: 2
0396166: RNCC: 5 | RNVC: 9
0398454-2: RNCC: 5 | RNVC: 9

4 Jun 1986

5340-14-410-7566
Webbing Strap

144107566
A02560-01-2000E001: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-421-9340
Butt Hinge

144219340
CP1507024-16199AAL: RNCC: 3 | RNVC: 2

10 Feb 1988

5340-14-505-2635
Mounting Plate

145052635
3-062-2-10311: RNCC: 3 | RNVC: 2

17 Mar 1998

5340-14-536-9778
Bumper

145369778
6755-56: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-525-8223
Eye Hook

145258223
N116627: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-308-0963
Retaining Strap

143080963
0160590008: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-335-8638
Rod End Connector

143358638
5000000065: RNCC: 3 | RNVC: 2
5000000065: RNCC: 5 | RNVC: 9

24 Jul 1976

5340-14-370-7630
Anchor Strap

143707630
NO PRIMARY REF14-370-7630: RNCC: 3 | RNVC: 2
VDPM02257: RNCC: 5 | RNVC: 2
202303166351: RNCC: 5 | RNVC: 9
DLK383M1: RNCC: 5 | RNVC: 9
PR660-10: RNCC: 5 | RNVC: 9

5 Jun 1981

5340-14-295-8296
Angle Bracket

142958296
C57370: RNCC: 3 | RNVC: 2
C57370: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-537-8675
Butt Hinge

145378675
56294022: RNCC: 3 | RNVC: 2

2 Dec 2003

5340-14-357-8984
Butt Hinge

143578984
0011050696: RNCC: 3 | RNVC: 2
0011050696: RNCC: 5 | RNVC: 9

20 Jul 1979

5340-14-546-5945
Angle Bracket

145465945
RA1M701216014: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-14-360-9799
Mounting Plate

143609799
90S05002: RNCC: 3 | RNVC: 2
90S05002: RNCC: 5 | RNVC: 2

19 Dec 1979

5340-14-518-9361
Mounting Plate

145189361
MB3327F00: RNCC: 3 | RNVC: 2

29 Feb 2000

5340-14-472-8653
Mounting Bracket

144728653
332A21-1030-82: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-523-0230
Mounting Plate

145230230
47139190: RNCC: 3 | RNVC: 2

18 Dec 2000

5340-14-418-6963
Bow Handle

144186963
29694708: RNCC: 3 | RNVC: 2
4225-341A506: RNCC: 3 | RNVC: 2
4225-341A506: RNCC: 5 | RNVC: 2

9 Sep 1987

5340-14-359-2778
Snap Hook

143592778
4030-50ST18: RNCC: 3 | RNVC: 2
85-689-5063: RNCC: 6 | RNVC: 9

2 Oct 1979

5340-14-465-2973
Mounting Bracket

144652973
365A81-0225-00: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-374-0376
Rod End Connector

143740376
BAZ94545: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-541-7790
Rigid Caster

145417790
9050-2669: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-486-4244
Loop Clamp

144864244
051700: RNCC: 3 | RNVC: 2

19 Mar 1997

5340-14-308-3600
Angle Bracket

143083600
E4M632-39-03: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-353-2155
Webbing Strap

143532155
356002030004: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-276-9361
Cable Retractor

142769361
RU364-414M35: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-437-4490
Mounting Bracket

144374490
332A61-1262-00: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-468-1677
Angle Bracket

144681677
78703-20-055A: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-517-7390
Loop Clamp

145177390
501-779-784-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-375-9662
Anchor Strap

143759662
NO PRIMARY REF14-375-9662: RNCC: 3 | RNVC: 2
404207333: RNCC: 5 | RNVC: 2
404207333: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-511-6725
Mounting Bracket

145116725
T5536620: RNCC: 3 | RNVC: 2

8 Jan 1999

5340-14-502-8810
Access Cover

145028810
9Y9432: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-481-3641
Mounting Bracket

144813641
10023664: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-251-8426
Retaining Strap

142518426
47075: RNCC: 3 | RNVC: 2
031526: RNCC: 3 | RNVC: 2
932070GRIS: RNCC: 3 | RNVC: 2
417075: RNCC: 5 | RNVC: 2
31526: RNCC: 5 | RNVC: 2
3245060315269: RNCC: 5 | RNVC: 2
206-8540-9: RNCC: 5 | RNVC: 9
5322680: RNCC: 5 | RNVC: 9
LG31526: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-487-5557
Mounting Plate

144875557
78737TK050-11XA: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-395-4622
Bow Handle

143954622
161-10449-210: RNCC: 3 | RNVC: 2
161-10449-21: RNCC: 5 | RNVC: 2
704A31-610-008: RNCC: 5 | RNVC: 2
161-10449-21: RNCC: 5 | RNVC: 2
161-10449-D: RNCC: 5 | RNVC: 2
F300 0T 005 3924: RNCC: 5 | RNVC: 9

30 Oct 1984

5340-14-303-0142
Control Rod

143030142
321C0-0105REP3: RNCC: 3 | RNVC: 2
321C0-105REP3: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-381-4426
Retaining Strap

143814426
NO PRIMARY REF14-381-4426: RNCC: 3 | RNVC: 2
345-06972-0: RNCC: 5 | RNVC: 9
345069720: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-315-4836
Loop Clamp

143154836
620-841-003-0: RNCC: 3 | RNVC: 2
620-841-003-0: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-516-0662
Utility Access Door

145160662
10323906: RNCC: 3 | RNVC: 2
IF-192-2167: RNCC: 5 | RNVC: 9

8 Sep 1999

5340-14-488-3307
Access Cover

144883307
U4823417: RNCC: 3 | RNVC: 2
U48234-17: RNCC: 5 | RNVC: 2

30 Apr 1997

5340-14-466-5132
Rod End Connector

144665132
NO PRIMARY REF14-466-5132: RNCC: 3 | RNVC: 2
431385-1: RNCC: 5 | RNVC: 2

15 Nov 1993

5340-14-336-8644
Rod End Clevis

143368644
502-706-117-0: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-361-5115
Mending Plate

143615115
0072-11-21-03: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-447-3308
Mending Plate

144473308
3-12-0008: RNCC: 3 | RNVC: 2
3-120008: RNCC: 5 | RNVC: 2

15 May 1991

5340-14-520-2170
Access Cover

145202170
C82ZA5013-020: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-468-6265
Mounting Bracket

144686265
NO PRIMARY REF14-468-6265: RNCC: 3 | RNVC: 2
239967: RNCC: 5 | RNVC: 2

14 Mar 1994

5340-14-472-3051
Loop Clamp

144723051
202C221-13-0: RNCC: 3 | RNVC: 9

19 Oct 1994

5340-14-355-3787
Pipe Hanger

143553787
121B71-311-29-0: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-502-9892
Mounting Bracket

145029892
332A21-1238-00: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-544-1144
Strap Fastener Loop

145441144
703A92-2110-20: RNCC: 3 | RNVC: 2

4 Jan 2005

5340-14-438-9543
Mounting Bracket

144389543
1390-72-01: RNCC: 3 | RNVC: 2
91627415: RNCC: 5 | RNVC: 2

11 Apr 1990

5340-14-361-1164
Access Cover

143611164
955120-101CPV: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-485-5790
Mounting Bracket

144855790
332A58-1461-20: RNCC: 3 | RNVC: 2
F300 0T 022 9882: RNCC: 5 | RNVC: 9

29 Jan 1997

5340-14-369-6211
Key Blank

143696211
B0170-127F6: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-230-1132
Loop Clamp

142301132
51211902008: RNCC: 3 | RNVC: 2
A0021-20P08: RNCC: 5 | RNVC: 2
20P8: RNCC: 5 | RNVC: 2
9562810820: RNCC: 5 | RNVC: 2
0047325T00: RNCC: 5 | RNVC: 2
A0021-20P08: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-361-7146
Mounting Plate

143617146
NO PRIMARY REF14-361-7146: RNCC: 3 | RNVC: 2
F2031960: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-14-395-3112
Mounting Plate

143953112
SFC0-5BW002REP4: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-389-6204
Surface Bolt

143896204
M11-17: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-319-0169
Control Rod

143190169
0RC5-50-24: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-499-2026
Bumper

144992026
105218018004A: RNCC: 3 | RNVC: 2
3538309-001: RNCC: 3 | RNVC: 2
105218018004A: RNCC: 3 | RNVC: 9

29 Oct 1997

5340-14-261-2582
Retaining Strap

142612582
175-52-20: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-484-8115
Synchro Clamp

144848115
332P61-6247-20: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-351-3681
Loop Clamp

143513681
501-803-697-0: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-432-2144
Bumper

144322144
NO PRIMARY REF14-432-2144: RNCC: 3 | RNVC: 2
40100-17: RNCC: 5 | RNVC: 9

29 May 1989

5340-14-468-1686
Angle Bracket

144681686
78703-20-055B: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-412-8662
Webbing Strap

144128662
ST406M75A18-16: RNCC: 3 | RNVC: 2

5 Nov 1986

5340-14-402-7640
Mending Plate

144027640
9760-17: RNCC: 3 | RNVC: 9

19 Jul 1985

5340-14-435-8246
Mounting Plate

144358246
332A32-2380-00: RNCC: 3 | RNVC: 2
F300 0T 010 2348: RNCC: 5 | RNVC: 9

22 Nov 1989

5340-14-331-3096
Utility Access Door

143313096
NO PRIMARY REF14-331-3096: RNCC: 3 | RNVC: 2
M5942-19: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-321-6376
Rod End Clevis

143216376
702A10-0038-00: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-554-7452
Angle Bracket

145547452
78707-033-07G: RNCC: 3 | RNVC: 2

8 Aug 2007

5340-14-473-6732
Mounting Plate

144736732
332A76-4645-20: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-461-0530
Loop Clamp

144610530
DS/SP110/10PP-GD-AS: RNCC: 3 | RNVC: 2
RAR3538: RNCC: 5 | RNVC: 2
714.101-10,0/10,0: RNCC: 5 | RNVC: 2

22 Feb 1993

5340-14-445-6999
Cover Strip

144456999
MAT171-0234F4: RNCC: 3 | RNVC: 2

20 Feb 1991

5340-14-360-9900
Angle Bracket

143609900
252220: RNCC: 3 | RNVC: 2
85-689-9757: RNCC: 6 | RNVC: 9

19 Dec 1979

5340-14-438-7734
Mounting Plate

144387734
330A93-2034-23: RNCC: 3 | RNVC: 2

4 Apr 1990

5340-14-483-1162
Mounting Plate

144831162
0201-45-04-02-24: RNCC: 3 | RNVC: 2

8 Aug 1996

5340-14-302-8852
Control Rod

143028852
NO PRIMARY REF14-302-8852: RNCC: 3 | RNVC: 2
23842DETF: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-388-9429
Mounting Plate

143889429
ST159-2M517P56: RNCC: 3 | RNVC: 2
ST159-2M517P56B: RNCC: 5 | RNVC: 2

29 Nov 1983

5340-14-514-4806
Access Cover

145144806
45219273: RNCC: 3 | RNVC: 2
45219273: RNCC: 5 | RNVC: 2
5010579489: RNCC: 5 | RNVC: 2
IF-192-0312: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-289-6344
Angle Bracket

142896344
121E27-378-04-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-497-8905
Loop Clamp

144978905
650-402-620-0: RNCC: 3 | RNVC: 2

22 Oct 1997

5340-14-358-2566
Mending Plate

143582566
3511-131-13931: RNCC: 3 | RNVC: 2
3511 131 13931: RNCC: 5 | RNVC: 2

13 Aug 1979

5340-14-376-5297
Access Cover

143765297
NO PRIMARY REF14-376-5297: RNCC: 3 | RNVC: 2
404304617: RNCC: 5 | RNVC: 2
404304617: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-413-5954
Corner Brace

144135954
34750000005: RNCC: 3 | RNVC: 2
85-693-2549: RNCC: 6 | RNVC: 9

22 Dec 1986

5340-14-386-4778
Loop Clamp

143864778
50011-3-28: RNCC: 3 | RNVC: 2
620-849-491-0: RNCC: 5 | RNVC: 2
NSA935807C28: RNCC: 5 | RNVC: 2
50011-3-28: RNCC: 5 | RNVC: 9

24 Aug 1983

5340-14-391-7602
Angle Bracket

143917602
360A57-2048-21Z: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-220-8745
Loop Clamp

142208745
51115305025: RNCC: 3 | RNVC: 2
55218-325-001DB: RNCC: 5 | RNVC: 2
55218-325D507DB: RNCC: 5 | RNVC: 2
55218-325N: RNCC: 5 | RNVC: 2
A0021-25S25: RNCC: 5 | RNVC: 2
25S25: RNCC: 5 | RNVC: 2
A0021-25S25: RNCC: 5 | RNVC: 2

1 Jan 1965

5340-14-297-7354
Handle Grip

142977354
GSM175-014F118ETF122: RNCC: 3 | RNVC: 2
GSM175-014F118,119,122,123: RNCC: 5 | RNVC: 2
GSM1931FF36DET5: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-503-1095
Clip Retainer Plate

145031095
95ET014-31: RNCC: 3 | RNVC: 2
95ET014-31: RNCC: 5 | RNVC: 2
95ET014-31: RNCC: 5 | RNVC: 9
5365AA2046031: RNCC: 6 | RNVC: 9

7 Jan 1998

5340-14-413-1866
Pipe Hanger

144131866
332A75-1606-20: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-524-8036
Loop Clamp

145248036
NSA5516-15ND: RNCC: 1 | RNVC: 2
55163515: RNCC: 3 | RNVC: 2
91773478: RNCC: 5 | RNVC: 2

17 Apr 2001

5340-14-273-6423
Turnbuckle Body

142736423
649-91-13M: RNCC: 3 | RNVC: 2
83111-024UB: RNCC: 5 | RNVC: 2
85-593-5250: RNCC: 6 | RNVC: 9

1 Jan 1971

5340-14-516-8758
Mounting Plate

145168758
340-4224-0000: RNCC: 3 | RNVC: 9

20 Oct 1999

5340-14-371-5565
Bumper

143715565
366A25-1093-01: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-350-3665
Access Cover

143503665
TH20INS7-285: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-312-9814
Webbing Strap

143129814
PH36-805E: RNCC: 3 | RNVC: 2
PH36-805E: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-292-4167
Angle Bracket

142924167
NO PRIMARY REF14-292-4167: RNCC: 3 | RNVC: 2
1210042: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-465-4936
Mounting Bracket

144654936
365A54-5032-20: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-549-2760
Mounting Bracket

145492760
3-85-31-02-113-25: RNCC: 3 | RNVC: 2

17 Mar 2006

5340-14-464-1646
Loop Clamp

144641646
51121905004: RNCC: 3 | RNVC: 2
2419904: RNCC: 5 | RNVC: 2
51121919004: RNCC: 5 | RNVC: 9
24PE4: RNCC: 5 | RNVC: 9
25PE4: RNCC: 5 | RNVC: 9
85-695-0258: RNCC: 6 | RNVC: 9

15 Jul 1993

5340-14-482-9231
Pipe Hanger

144829231
78732-020-094: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-468-1335
Angle Bracket

144681335
21-767-300: RNCC: 3 | RNVC: 2
21-767-300: RNCC: 5 | RNVC: 9

9 Feb 1994

5340-14-490-3033
Mounting Bracket

144903033
A02332-08-0000P006: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-360-8085
Bow Handle

143608085
46191-3: RNCC: 3 | RNVC: 2
DMC1422-4U: RNCC: 5 | RNVC: 2

19 Dec 1979

5340-14-542-7961
Loop Clamp

145427961
6263-030: RNCC: 3 | RNVC: 2

14 Aug 2004

5340-14-495-4525
Mounting Plate

144954525
R48234-37: RNCC: 3 | RNVC: 2
F300 0T 019 2827: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-310-2549
Rod End Connector

143102549
773-422-215DET3: RNCC: 3 | RNVC: 2
773-422-215DET3: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-352-6110
Bridge Clamp

143526110
053V01-542290P: RNCC: 3 | RNVC: 2
0542290P00: RNCC: 5 | RNVC: 2

14 Nov 1978

5340-14-463-7948
Mounting Plate

144637948
21384358-00: RNCC: 3 | RNVC: 2
21384358-4: RNCC: 5 | RNVC: 2

30 Jun 1993

5340-14-345-3207
Cane Bolt

143453207
NO PRIMARY REF14-345-3207: RNCC: 3 | RNVC: 2
15274: RNCC: 5 | RNVC: 9

5 Oct 1977

5340-14-425-7443
Loop Clamp

144257443
512131050201: RNCC: 3 | RNVC: 2
30G20: RNCC: 5 | RNVC: 2
ASNA0021-30G20: RNCC: 5 | RNVC: 2
ASNA0021-30G20: RNCC: 5 | RNVC: 2

21 Jul 1988

5340-14-342-3486
Butt Hinge

143423486
321A58-0809-95: RNCC: 3 | RNVC: 2
85-800-3543: RNCC: 6 | RNVC: 9

14 Apr 1977

5340-14-501-7798
Mounting Bracket

145017798
NO PRIMARY REF14-501-7798: RNCC: 3 | RNVC: 2
0 670 800: RNCC: 5 | RNVC: 9
4541 002 260 004: RNCC: 5 | RNVC: 9
76250 224 6266: RNCC: 5 | RNVC: 9
F300 0T 000 9557: RNCC: 6 | RNVC: 9

10 Nov 1997

5340-14-469-7243
Mounting Bracket

144697243
332P61-2575-22: RNCC: 3 | RNVC: 2

4 May 1994

5340-14-529-6715
Bow Handle

145296715
457-12679-001: RNCC: 3 | RNVC: 2

4 Apr 2002

5340-14-465-4984
Mounting Plate

144654984
365A69-2020-38: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-281-2561
Rod End Connector

142812561
121E21-610-15-0: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-289-6270
Angle Bracket

142896270
121E27-328-06-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-500-8573
Webbing Strap

145008573
NO PRIMARY REF14-500-8573: RNCC: 3 | RNVC: 2
01122-1: RNCC: 5 | RNVC: 9
F300 0T 024 8776: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-218-5864
Loop Clamp

142185864
NO PRIMARY REF14-218-5864: RNCC: 3 | RNVC: 2
694001-2: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-464-9576
Cover Strip

144649576
365A25-0521-2401: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-293-8923
Bumper

142938923
EQDIV43-09-1: RNCC: 3 | RNVC: 2
EQDIV43-09REP1: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-354-3852
Retaining Strap

143543852
21312008: RNCC: 3 | RNVC: 2
21312008-0: RNCC: 5 | RNVC: 2

31 Jan 1979

5340-14-330-0654
Access Cover

143300654
501-500-027-0: RNCC: 3 | RNVC: 2
85-688-8917: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-400-8007
Cover Strip

144008007
3160S25-29-576-51: RNCC: 3 | RNVC: 2
3160252957951: RNCC: 5 | RNVC: 9

21 May 1985

5340-14-437-4525
Mounting Bracket

144374525
332A61-2339-06: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-514-1856
Mounting Bracket

145141856
15901-0427-0: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-14-465-1487
Mounting Plate

144651487
365A23-1662-00: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-369-1392
Angle Bracket

143691392
365A21-0072-47: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-380-9969
Webbing Strap

143809969
NT8440-3001STCMPAR3-1BLANCHEGEN: RNCC: 2 | RNVC: 2

14 Dec 1982

5340-14-433-2146
Angle Bracket

144332146
4202-243A510: RNCC: 3 | RNVC: 2
85-692-8485: RNCC: 6 | RNVC: 9

18 Jul 1989

5340-14-418-4832
Leaf Spring

144184832
L80G244LD515EP8: RNCC: 3 | RNVC: 2
L80G244-12: RNCC: 5 | RNVC: 2
R80G244LD515EP8: RNCC: 5 | RNVC: 2
1105-168: RNCC: 5 | RNVC: 2

26 Aug 1987

5340-14-525-8438
Exit Bolt

145258438
N135182: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-477-2708
Rim Lock

144772708
141HB3: RNCC: 3 | RNVC: 2
23100401: RNCC: 5 | RNVC: 2

2 Aug 1995

5340-14-237-7780
Loop Clamp

142377780
9562860020: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-500-8200
Section Block Clamp

145008200
E64009998134: RNCC: 3 | RNVC: 2
F300 0T 024 8402: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-460-6986
Mounting Bracket

144606986
319349: RNCC: 3 | RNVC: 2
319349: RNCC: 5 | RNVC: 9

4 Feb 1993

5340-14-312-1176
Access Door Hinge

143121176
157905: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-471-2157
Rim Lock Set

144712157
5316CCDT: RNCC: 3 | RNVC: 2

4 Aug 1994

5340-14-379-3145
Mounting Plate

143793145
15003: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-553-0723
Webbing Strap

145530723
0027882: RNCC: 3 | RNVC: 2

27 Feb 2007

5340-14-544-9477
Mounting Plate

145449477
10704995000: RNCC: 3 | RNVC: 2

7 Mar 2005

5340-14-520-2657
Butt Hinge

145202657
12-1-3635PF: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-501-0013
Mounting Bracket

145010013
10174509: RNCC: 3 | RNVC: 2
F300 0T 025 0226: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-261-0393
Control Rod

142610393
RAC2011: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-503-7170
Blank Panel

145037170
01236200: RNCC: 3 | RNVC: 2

28 Jan 1998

5340-14-530-6871
Cover Strip

145306871
T524A2001535: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-399-9691
Retaining Strap

143999691
230285: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-476-5564
Mounting Bracket

144765564
C70469: RNCC: 3 | RNVC: 2
C70469: RNCC: 5 | RNVC: 2

21 Jun 1995

5340-14-454-2394
Mounting Plate

144542394
16316140: RNCC: 3 | RNVC: 2
16316140: RNCC: 5 | RNVC: 9

26 Mar 1992

5340-14-505-0890
Mounting Plate

145050890
03396301: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-519-6116
Mounting Plate

145196116
C651A1101201: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-527-9205
Mounting Plate

145279205
8144442: RNCC: 3 | RNVC: 2

28 Nov 2001

5340-14-438-5975
Mending Plate

144385975
TB1030418: RNCC: 3 | RNVC: 2

28 Mar 1990

5340-14-331-7023
Angle Bracket

143317023
BAZ1805: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-483-5192
Mounting Bracket

144835192
1097666X00: RNCC: 3 | RNVC: 2

18 Sep 1996

5340-14-523-0683
Mounting Plate

145230683
2 234 642 Z 00: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-14-522-6100
Mounting Bracket

145226100
2341005: RNCC: 3 | RNVC: 2

8 Nov 2000

5340-14-457-9311
Mounting Bracket

144579311
23210928-9: RNCC: 3 | RNVC: 2

2 Oct 1992

5340-14-043-1482
Quick Release Pin

140431482
065U20-719841K: RNCC: 3 | RNVC: 2

10 Apr 1984

5340-14-554-2117
Loop Clamp

145542117
357 209: RNCC: 3 | RNVC: 2
357 209: RNCC: 3 | RNVC: 2

13 Jun 2007

5340-14-252-5545
Strap Fastener Loop

142525545
1282: RNCC: 3 | RNVC: 2
1282: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-515-2193
Loop Clamp

145152193
0009550838: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-210-6723
Access Cover

142106723
0000610977: RNCC: 3 | RNVC: 2
0000610977: RNCC: 5 | RNVC: 9
610977: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-400-0174
Bumper

144000174
607605: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-511-3172
Lock Bolt

145113172
1176269: RNCC: 3 | RNVC: 2

16 Dec 1998

5340-14-449-2714
Mounting Bracket

144492714
381010R: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-404-6531
Access Cover

144046531
609970: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-371-1173
Rod End Clevis

143711173
970387: RNCC: 3 | RNVC: 2
970387: RNCC: 5 | RNVC: 9

5 Jun 1981

5340-14-403-4977
Access Cover

144034977
22445750: RNCC: 3 | RNVC: 2
22445750: RNCC: 5 | RNVC: 9

21 Aug 1985

5340-14-458-9899
Rod End Clevis

144589899
D9015: RNCC: 3 | RNVC: 2
RAR3525: RNCC: 5 | RNVC: 2

10 Nov 1992

5340-14-461-1532
Access Cover

144611532
46060518: RNCC: 3 | RNVC: 2
46060518: RNCC: 5 | RNVC: 9

24 Feb 1993

5340-14-383-1875
Anchor Strap

143831875
MY2051511520G01: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-318-8750
Butt Hinge

143188750
1VDP0970: RNCC: 3 | RNVC: 2
VDPM01034: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-254-7763
Retaining Strap

142547763
052238: RNCC: 3 | RNVC: 9
52238: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-548-3888
Rim Lock Set

145483888
21938: RNCC: 3 | RNVC: 2

12 Jan 2006

5340-14-402-9398
Access Cover

144029398
29736851: RNCC: 3 | RNVC: 2
29736851: RNCC: 5 | RNVC: 9

25 Jul 1985

5340-14-440-9870
Access Hole Frame

144409870
20734739: RNCC: 3 | RNVC: 2
20734739: RNCC: 5 | RNVC: 9

9 Aug 1990

5340-14-530-9420
Access Cover

145309420
45679831: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-14-393-0007
Leaf Spring

143930007
5000706992: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-14-476-2992
Loop Clamp

144762992
P609107: RNCC: 3 | RNVC: 2
Z00.N6000707225: RNCC: 5 | RNVC: 2
Z00.N6000707225TBM: RNCC: 5 | RNVC: 9

2 Jun 1995

5340-14-554-3268
Mounting Plate

145543268
82373977000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-516-3871
Access Cover

145163871
205816: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-416-7363
Anchor Strap

144167363
150894: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-463-7181
Mending Plate

144637181
203518: RNCC: 3 | RNVC: 2
89170727: RNCC: 5 | RNVC: 2

23 Jun 1993

5340-14-397-0086
Access Cover

143970086
15456022: RNCC: 3 | RNVC: 2
15456022: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-542-2003
Access Cover

145422003
10030118: RNCC: 3 | RNVC: 2
10030118: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-449-3217
Clamp Bolt Assembly

144493217
571A208: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-505-7168
Access Cover

145057168
4154799: RNCC: 3 | RNVC: 2
4154799: RNCC: 5 | RNVC: 2

26 Mar 1998

5340-14-484-7195
Plug Button

144847195
9920371: RNCC: 3 | RNVC: 2

4 Dec 1996

5340-14-525-5001
Mounting Bracket

145255001
465244: RNCC: 3 | RNVC: 2

6 Jun 2001

5340-14-471-0056
Cover Strip

144710056
DA2C124316561U1: RNCC: 3 | RNVC: 2

20 Jul 1994

5340-14-450-8548
Access Cover

144508548
39394993: RNCC: 3 | RNVC: 2
39394993: RNCC: 5 | RNVC: 2

23 Oct 1991

5340-14-442-9463
Access Cover

144429463
39538072: RNCC: 3 | RNVC: 2
39538072: RNCC: 5 | RNVC: 9

7 Nov 1990

5340-14-249-8289
Loop Clamp

142498289
HE60C16B: RNCC: 3 | RNVC: 2
HE60C16B: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-434-1520
Access Cover

144341520
16173998: RNCC: 3 | RNVC: 2

6 Sep 1989

5340-14-445-0550
Synchro Clamp

144450550
75517: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-14-507-6448
Access Cover

145076448
96183039: RNCC: 3 | RNVC: 2

7 Aug 1998

5340-14-520-6039
Access Cover

145206039
40156588: RNCC: 3 | RNVC: 2

24 May 2000

5340-14-384-6642
Access Cover

143846642
16496945: RNCC: 3 | RNVC: 2

2 Jun 1983

5340-14-497-7676
Access Cover

144977676
46316334: RNCC: 3 | RNVC: 2
46316334: RNCC: 5 | RNVC: 9

15 Oct 1997

5340-14-245-1543
Anchor Strap

142451543
70483303: RNCC: 3 | RNVC: 2
483303: RNCC: 5 | RNVC: 9
70483303: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-512-0609
Access Cover

145120609
0053689: RNCC: 3 | RNVC: 2
79081047: RNCC: 3 | RNVC: 9

3 Feb 1999

5340-14-466-1680
Retaining Strap

144661680
166064: RNCC: 3 | RNVC: 2
89170167: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-400-5732
Rod End Clevis

144005732
373104: RNCC: 3 | RNVC: 2
373104: RNCC: 5 | RNVC: 9

8 May 1985

5340-14-366-8186
Mending Plate

143668186
970549: RNCC: 3 | RNVC: 2
970549: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-441-1322
Mounting Bracket

144411322
16765638: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-296-8347
Mending Plate

142968347
0051770: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-429-2738
Rod End Clevis

144292738
DA2C775225001A1: RNCC: 3 | RNVC: 2

11 Jan 1989

5340-14-364-3872
Angle Bracket

143643872
4441010280: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-464-8903
Loop Clamp

144648903
PE27019RC6: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-538-6405
Lock Bolt

145386405
NGM0010060100147: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-500-7690
Mounting Bracket

145007690
D64309003000: RNCC: 3 | RNVC: 2
F300 0T 024 7889: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-515-9094
Leakproof Seal Plug

145159094
4M413118A: RNCC: 3 | RNVC: 2

26 Aug 1999

5340-14-532-1314
Utility Access Door

145321314
5010559079: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-14-459-2164
Cover Strip

144592164
PM1A129120104: RNCC: 3 | RNVC: 2
PM1A129120104: RNCC: 5 | RNVC: 2

19 Nov 1992

5340-14-422-4488
Retaining Strap

144224488
174249: RNCC: 3 | RNVC: 2

3 Mar 1988

5340-14-553-4999
Access Cover

145534999
F1397544: RNCC: 3 | RNVC: 2

10 Apr 2007

5340-14-386-1041
Anchor Strap

143861041
397211: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-460-5522
Mounting Bracket

144605522
7700771776: RNCC: 3 | RNVC: 2
7701464300: RNCC: 5 | RNVC: 2

29 Jan 1993

5340-14-398-7304
Anchor Strap

143987304
5000065541: RNCC: 3 | RNVC: 2
5000065541: RNCC: 5 | RNVC: 9

6 Feb 1985

5340-14-552-1535
Angle Bracket

145521535
RA1M701513261N1: RNCC: 3 | RNVC: 2

29 Nov 2006

5340-14-506-7335
Mounting Plate

145067335
BB4291: RNCC: 3 | RNVC: 2

13 May 1998

5340-14-434-2728
Mending Plate

144342728
559111: RNCC: 3 | RNVC: 2

19 Sep 1989

5340-14-489-8155
Mounting Bracket

144898155
009304378P: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-14-432-1070
Mounting Bracket

144321070
239117: RNCC: 3 | RNVC: 2

24 May 1989

5340-14-552-0329
Access Cover

145520329
0249921560: RNCC: 3 | RNVC: 2

21 Nov 2006

5340-14-455-9351
Pipe Hanger

144559351
PM1A727284010: RNCC: 3 | RNVC: 2
PM1A727284010: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-511-6074
Runner

145116074
AER320430: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-554-8443
Loop Clamp

145548443
78651DH10: RNCC: 1 | RNVC: 2
78651DH10: RNCC: 3 | RNVC: 2

30 Aug 2007

5340-14-456-7382
Mounting Bracket

144567382
D50674EB: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-14-403-3647
Rod End Clevis

144033647
189266: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-298-8733
Access Cover

142988733
179852: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-549-8364
Angle Bracket

145498364
2092775: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-500-4621
Mounting Plate

145004621
E63400000032: RNCC: 3 | RNVC: 2
F300 0T 024 4790: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-503-1594
Cover Strip

145031594
RA1M228770251A2: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-555-5576
Mounting Bracket

145555576
DA1F203745500: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-14-432-9996
Access Cover

144329996
10270-230: RNCC: 3 | RNVC: 9
89408315: RNCC: 5 | RNVC: 2

5 Jul 1989

5340-14-482-6096
Access Cover

144826096
20662215: RNCC: 3 | RNVC: 2

18 Jul 1996

5340-14-382-5002
Access Cover

143825002
16497198: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-314-3348
Butt Hinge

143143348
181713: RNCC: 3 | RNVC: 2
196768: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-533-6309
Access Cover

145336309
D116212: RNCC: 3 | RNVC: 2

12 Feb 2003

5340-14-494-0867
Mounting Bracket

144940867
132532G: RNCC: 3 | RNVC: 2
F300 0T 015 3914: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-483-1121
Mounting Plate

144831121
ALZ084055041320: RNCC: 3 | RNVC: 2

8 Aug 1996

5340-14-390-3312
Angle Bracket

143903312
C715: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-457-7099
Access Cover

144577099
41255122: RNCC: 3 | RNVC: 2
5412551225: RNCC: 5 | RNVC: 2

17 Sep 1992

5340-14-425-2881
Anchor Strap

144252881
30330146R: RNCC: 3 | RNVC: 2

30 Jun 1988

5340-14-484-6567
Plug Button

144846567
29402935: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-532-2846
Access Cover

145322846
39371716: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-14-509-0776
Access Cover

145090776
MG300167: RNCC: 3 | RNVC: 2
7701003225: RNCC: 5 | RNVC: 2

21 Oct 1998

5340-14-519-1134
Mounting Plate

145191134
8021935C00: RNCC: 3 | RNVC: 2

8 Mar 2000

5340-14-500-6442
Section Block Clamp

145006442
E64009998013: RNCC: 3 | RNVC: 2
F300 0T 024 6628: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-501-0064
Metal Grille

145010064
10243422: RNCC: 3 | RNVC: 2
F300 0T 025 0358: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-230-5311
Loop Clamp

142305311
0202117440: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-483-4130
Mounting Bracket

144834130
OSS00047: RNCC: 3 | RNVC: 2

12 Sep 1996

5340-14-302-3075
Retaining Strap

143023075
205768: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-548-7910
Angle Bracket

145487910
S311A1133101: RNCC: 3 | RNVC: 2

13 Feb 2006

5340-14-457-8638
Mounting Bracket

144578638
5000744641: RNCC: 3 | RNVC: 2
89287803: RNCC: 5 | RNVC: 2

24 Sep 1992

5340-14-549-5034
Mounting Bracket

145495034
61688965AA: RNCC: 3 | RNVC: 2

11 Apr 2006

5340-14-454-2497
Case Leg

144542497
16292528: RNCC: 3 | RNVC: 2
16292528: RNCC: 5 | RNVC: 9

26 Mar 1992

5340-14-530-8427
Mounting Plate

145308427
5807966C00: RNCC: 3 | RNVC: 2
5807966C00: RNCC: 5 | RNVC: 2

9 Jul 2002

5340-14-520-3412
Access Cover

145203412
40146487: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-545-2653
Mounting Bracket

145452653
S215A4012106: RNCC: 3 | RNVC: 2

30 Mar 2005

5340-14-268-9905
Handwheel

142689905
000MA0060F6-6N1: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-202-3123
Loop Clamp

142023123
STD46: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-238-5322
Retaining Strap

142385322
81116: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-553-9416
Corner Brace

145539416
480285: RNCC: 3 | RNVC: 2

1 Jun 2007

5340-14-500-7100
Section Block Clamp

145007100
E64009998210: RNCC: 3 | RNVC: 2
F300 0T 024 7292: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-461-1677
Mending Plate

144611677
4772815090: RNCC: 3 | RNVC: 2
5046055: RNCC: 5 | RNVC: 9

24 Feb 1993

5340-14-542-2098
Mounting Bracket

145422098
570002908: RNCC: 3 | RNVC: 2
570002908: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-532-1327
Strap Fastener Loop

145321327
5010559344: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-14-476-2506
Angle Bracket

144762506
66543.0: RNCC: 3 | RNVC: 2

31 May 1995

5340-14-212-0344
Control Rod

142120344
28015041-5: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-514-1769
Mounting Plate

145141769
15271-1627-0: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-14-292-4373
Mounting Bracket

142924373
341A76-1193-12: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-464-4158
Retaining Strap

144644158
21S0801001: RNCC: 3 | RNVC: 2
21S0801001: RNCC: 5 | RNVC: 2

28 Jul 1993

5340-14-530-3374
Eye Hook

145303374
1097200: RNCC: 3 | RNVC: 2
1097200: RNCC: 5 | RNVC: 2

3 Jun 2002

5340-14-535-1392
Compression Cup

145351392
3887: RNCC: 3 | RNVC: 2
5000288058: RNCC: 5 | RNVC: 2

14 May 2003

5340-14-527-9658
Mounting Bracket

145279658
T632A2314301: RNCC: 3 | RNVC: 2

5 Dec 2001

5340-14-500-9335
Retaining Clip

145009335
F00154922: RNCC: 3 | RNVC: 2
F00154922: RNCC: 5 | RNVC: 9
F300 0T 024 9547: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-457-6191
Section Block Clamp

144576191
PM1A741194011: RNCC: 3 | RNVC: 2
PM1A741194011: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-278-4399
Webbing Strap

142784399
ST28: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-349-8864
Retaining Strap

143498864
002932222P: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-530-5941
Retaining Strap

145305941
211499: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-14-521-9642
Mounting Plate

145219642
TPS1B4001C: RNCC: 3 | RNVC: 2

27 Sep 2000

5340-14-449-4991
Retaining Strap

144494991
BAZ9711: RNCC: 3 | RNVC: 2

21 Aug 1991

5340-14-407-2293
Synchro Clamp

144072293
20320842: RNCC: 3 | RNVC: 2
20320842: RNCC: 5 | RNVC: 9

12 Feb 1986

5340-14-496-4243
Retaining Bail

144964243
F120127: RNCC: 3 | RNVC: 2
F300 0T 021 5144: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-507-0879
Angle Bracket

145070879
10380581: RNCC: 3 | RNVC: 2

10 Jun 1998

5340-14-526-4959
Turnbuckle Body

145264959
D66108: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-533-7984
Mounting Plate

145337984
E15465AA: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-422-4120
Access Cover

144224120
969468: RNCC: 3 | RNVC: 2
969468: RNCC: 5 | RNVC: 9

3 Mar 1988

5340-14-469-1143
Section Block Clamp

144691143
554444: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-14-228-0704
Retaining Strap

142280704
0202110470: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-474-6964
Strap Hinge

144746964
600604050C5BIG: RNCC: 3 | RNVC: 2

24 Feb 1995

5340-14-526-4497
Angle Bracket

145264497
RA1M704191051: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-315-6244
Strap Fastener Loop

143156244
210768: RNCC: 3 | RNVC: 2
MP2016P: RNCC: 5 | RNVC: 9
1963: RNCC: 5 | RNVC: 9
210768: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-385-8762
Bridge Clamp

143858762
HE60-8-2-1: RNCC: 3 | RNVC: 2
HE60-8-2-1: RNCC: 5 | RNVC: 2
HE60-8-2-1: RNCC: 5 | RNVC: 9

24 Aug 1983

5340-14-533-2254
Expansion Plug

145332254
402215MA: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-520-3039
Mounting Bracket

145203039
23177523-7: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-448-9912
Flush Catch Claw

144489912
BAZ0824: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-14-553-6835
Mounting Plate

145536835
82089416000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-433-2474
Retaining Strap

144332474
2-27536: RNCC: 3 | RNVC: 2

18 Jul 1989

5340-14-500-9502
Pad Eye

145009502
E69103300000: RNCC: 3 | RNVC: 2
F300 0T 024 9714: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-481-3690
Webbing Strap

144813690
10284695: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-329-7755
Retaining Band

143297755
2-99158: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-305-0395
Retaining Strap

143050395
M3C701-19-04: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-505-6422
Mounting Bracket

145056422
E25001000053: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-335-8762
Angle Bracket

143358762
190151: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-287-5940
Rod End Clevis

142875940
A10-74-472-10-0: RNCC: 3 | RNVC: 2
A10-74-472-10-0: RNCC: 3 | RNVC: 2
A10-74-472-10-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-488-4143
Bumper

144884143
46893-4: RNCC: 3 | RNVC: 2

7 May 1997

5340-14-388-8105
Access Cover

143888105
01-187-500: RNCC: 3 | RNVC: 2
01-187-500: RNCC: 5 | RNVC: 9
5-606-900: RNCC: 5 | RNVC: 9

29 Nov 1983

5340-14-375-2952
Strap Fastener Loop

143752952
AS87: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-346-6149
Angle Bracket

143466149
2-23734: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-532-4804
Mounting Bracket

145324804
8040759W00: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-14-442-8676
Access Cover

144428676
16585821: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-14-505-0495
Eye Hook

145050495
0007008815: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-551-7595
Mounting Bracket

145517595
RA1A702506049: RNCC: 3 | RNVC: 2

20 Oct 2006

5340-14-282-5318
Angle Bracket

142825318
9130343: RNCC: 3 | RNVC: 2
9130343: RNCC: 3 | RNVC: 9

1 Jan 1971

5340-14-513-8873
Bow Handle

145138873
1940670DAN: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-432-6713
Access Cover

144326713
25776: RNCC: 3 | RNVC: 2
F300 0T 005 7691: RNCC: 6 | RNVC: 9

20 Jun 1989

5340-14-488-1552
Angle Bracket

144881552
0320757160: RNCC: 3 | RNVC: 2

18 Apr 1997

5340-14-418-1780
Angle Bracket

144181780
29687884: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-332-8921
Retaining Strap

143328921
204672: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-460-5676
Lock-Release Lever

144605676
PE71013-2: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-14-532-3600
Angle Bracket

145323600
RA1M216711431: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-546-4982
Casement Fastener

145464982
5800.6202: RNCC: 3 | RNVC: 2

8 Jul 2005

5340-14-544-8137
Strap Fastener Loop

145448137
9515953: RNCC: 3 | RNVC: 2

25 Feb 2005

5340-14-536-9132
Mounting Plate

145369132
TS170203: RNCC: 3 | RNVC: 2

22 Sep 2003

5340-14-541-7309
Self-Locking Insert

145417309
001R785: RNCC: 3 | RNVC: 2

25 Jun 2004

5340-14-216-7090
Retaining Strap

142167090
HE60P11: RNCC: 3 | RNVC: 2
531214: RNCC: 5 | RNVC: 2
HE60P11: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-320-1596
Stand Base

143201596
0202010230: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-495-1412
Mounting Bracket

144951412
92F50002: RNCC: 3 | RNVC: 2
F300 0T 018 4445: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-551-3424
Angle Bracket

145513424
RA1M250000528A1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-526-9868
Retaining Strap

145269868
T257A0006153: RNCC: 3 | RNVC: 2

20 Sep 2001

5340-14-481-2156
Angle Bracket

144812156
5010113437: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-14-369-9431
Strap Fastener Loop

143699431
398002140100: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-480-9878
Flush Door Ring

144809878
00012001: RNCC: 3 | RNVC: 2
EA01424: RNCC: 5 | RNVC: 2

12 Apr 1996

5340-14-465-0221
Runner

144650221
MB1608F01: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-379-7591
Flush Catch Claw

143797591
BAZ1968: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-529-3178
Mounting Plate

145293178
1-9513: RNCC: 3 | RNVC: 2

20 Mar 2002

5340-14-303-0529
Retaining Strap

143030529
2-14172: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-479-5730
Roller Holder

144795730
23222108-0: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-14-395-9676
Anchor Strap

143959676
175130: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-519-1005
Access Cover

145191005
27108795-8: RNCC: 3 | RNVC: 2

7 Mar 2000

5340-14-424-1666
Rod End Connector

144241666
535922: RNCC: 3 | RNVC: 2

19 May 1988

5340-14-544-3302
Mounting Plate

145443302
5623951A: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-14-521-3375
Access Cover

145213375
10301665: RNCC: 3 | RNVC: 2

20 Jul 2000

5340-14-465-0870
Lock-Release Lever

144650870
PE75003D1C50NR: RNCC: 3 | RNVC: 2

10 Sep 1993

5340-14-565-5951
Utility Access Door

145655951
AMPC GENE E 290073: RNCC: 3 | RNVC: 2

6 Sep 2010

5340-14-546-2672
Mounting Bracket

145462672
DE3F291242010: RNCC: 3 | RNVC: 2

21 Jun 2005

5340-14-554-9414
Loop Clamp

145549414
78651DH19CF: RNCC: 1 | RNVC: 2
78651DH19CF: RNCC: 3 | RNVC: 2

11 Sep 2007

5340-14-386-5252
Mending Plate

143865252
3892-99: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-532-6132
Mounting Bracket

145326132
P400003140: RNCC: 3 | RNVC: 2

20 Nov 2002

5340-14-394-7615
Mounting Plate

143947615
S8002LS025F6GTYPE2: RNCC: 3 | RNVC: 2

28 Aug 1984

5340-14-422-6370
Retaining Strap

144226370
251166: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-14-455-3445
Angle Bracket

144553445
276822: RNCC: 3 | RNVC: 2
276822: RNCC: 5 | RNVC: 9

21 May 1992

5340-14-541-2079
Luggage Handle

145412079
10 0004 0020: RNCC: 3 | RNVC: 2
10 0004 0020: RNCC: 5 | RNVC: 9

19 May 2004

5340-14-445-0663
Rod End Connector

144450663
5150514800: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-14-336-7801
Angle Bracket

143367801
15152808: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-432-6058
Mounting Plate

144326058
16954285: RNCC: 3 | RNVC: 9

14 Jun 1989

5340-14-548-3807
Case Corner

145483807
61563331AA: RNCC: 3 | RNVC: 2

11 Jan 2006

5340-14-449-0940
Retaining Strap

144490940
SSNGA9S517F40B: RNCC: 3 | RNVC: 2
47326A2501102H00A: RNCC: 5 | RNVC: 2

24 Jul 1991

5340-14-480-7850
Loop Clamp

144807850
EN4113S08NR: RNCC: 2 | RNVC: 2

29 Mar 1996

5340-14-432-8109
Angle Bracket

144328109
14400378K: RNCC: 3 | RNVC: 2

27 Jun 1989

5340-14-434-9283
Locking Stay

144349283
109100: RNCC: 3 | RNVC: 9
1091: RNCC: 5 | RNVC: 9
11.10910.0: RNCC: 5 | RNVC: 9
11109100: RNCC: 5 | RNVC: 9

10 Oct 1989

5340-14-378-5166
Rod End Connector

143785166
F50B295001014A1: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-341-7947
Leaf Spring

143417947
15417-48: RNCC: 3 | RNVC: 9

14 Apr 1977

5340-14-555-4105
Loop Clamp

145554105
78651RH22CF: RNCC: 1 | RNVC: 2
78651RH22CF: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-14-202-5340
Loop Clamp

142025340
15N6-5: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-495-3536
Mounting Plate

144953536
B38414-61: RNCC: 3 | RNVC: 2
F300 0T 019 1110: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-366-8639
Loop Clamp

143668639
EN4113S30NH: RNCC: 2 | RNVC: 2
51315305030: RNCC: 3 | RNVC: 2
21S30: RNCC: 5 | RNVC: 2
A0021-21S30: RNCC: 5 | RNVC: 2

20 Nov 1980

5340-14-493-6499
Mounting Plate

144936499
J05085-02-0600P003: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-233-3652
Loop Clamp

142333652
3130S99-73-065: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-549-5214
Lock-Release Lever

145495214
ST1-601-201-20: RNCC: 3 | RNVC: 2

12 Apr 2006

5340-14-435-8264
Mounting Plate

144358264
332A32-2412-21: RNCC: 3 | RNVC: 2

22 Nov 1989

5340-14-411-1510
Mounting Plate

144111510
332A32-2357-20: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-282-7106
Webbing Strap

142827106
NO PRIMARY REF14-282-7106: RNCC: 3 | RNVC: 2
503291: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-354-2584
Retaining Clip

143542584
650-41236-00: RNCC: 3 | RNVC: 2

30 Jan 1979

5340-14-303-5187
Sliding Door Track

143035187
3160S25-21-065: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-508-7668
Bow Handle

145087668
BS2318.11.01.000: RNCC: 3 | RNVC: 2
BS2318-11-01-000: RNCC: 5 | RNVC: 9

30 Sep 1998

5340-14-361-3512
Rod End Clevis

143613512
69-1-21-09: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-362-3593
Webbing Strap

143623593
NO PRIMARY REF14-362-3593: RNCC: 3 | RNVC: 2
12343-530: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-343-3023
Bumper

143433023
96169665: RNCC: 3 | RNVC: 2
3511-314-33411: RNCC: 5 | RNVC: 9
85-689-5417: RNCC: 6 | RNVC: 9

16 Jun 1977

5340-14-520-0894
Mounting Plate

145200894
4D94-039: RNCC: 3 | RNVC: 2

10 May 2000

5340-14-524-0295
Mounting Bracket

145240295
2483-08-04: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-14-424-8155
Casement Fastener

144248155
561107: RNCC: 3 | RNVC: 2

9 Jun 1988

5340-14-431-4640
Casement Fastener

144314640
36516: RNCC: 3 | RNVC: 2

19 Apr 1989

5340-14-041-2420
Mortise Lock Set

140412420
5238TCET5293CHR0MES: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-480-0596
Flush Catch Claw

144800596
10030478: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-361-6337
Pipe Hanger

143616337
000262: RNCC: 3 | RNVC: 2
53910-6: RNCC: 3 | RNVC: 2
000262: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-14-516-8484
Eye Hook

145168484
101160111441: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-14-248-9506
Rod End Connector

142489506
08048S20: RNCC: 3 | RNVC: 9
08048S20: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-248-9575
Rod End Connector

142489575
08006S33: RNCC: 3 | RNVC: 9
08006S33: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-476-0918
Tee Hinge

144760918
222-3018-343: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-521-2450
Blank Panel

145212450
341A08-2329-20: RNCC: 3 | RNVC: 2

12 Jul 2000

5340-14-509-8718
Loop Clamp

145098718
S1696-2X: RNCC: 3 | RNVC: 2
5340AA1073043: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-253-4262
Loop Clamp

142534262
321A27-0238-00: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-367-4235
Quick Release Pin

143674235
15171313: RNCC: 3 | RNVC: 2
15171313: RNCC: 5 | RNVC: 2
15171313: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-314-3687
Retaining Strap

143143687
NO PRIMARY REF14-314-3687: RNCC: 3 | RNVC: 2
544512: RNCC: 5 | RNVC: 2
2544512: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-315-7597
Mending Plate

143157597
773-403-118DET18: RNCC: 3 | RNVC: 2
773-403-118DET18: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-350-2251
Retaining Strap

143502251
SV3-01-07-15: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-410-2091
Mounting Plate

144102091
207822: RNCC: 3 | RNVC: 2
85-692-9083: RNCC: 6 | RNVC: 9

18 Jun 1986

5340-14-285-2759
Retaining Strap

142852759
6105-1420: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-308-3607
Loop Clamp

143083607
E4M701-55-810: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-306-1658
Pawl Fastener

143061658
1112MA4714-8: RNCC: 3 | RNVC: 2
029722: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-489-5898
Strap Fastener Loop

144895898
PONTE91956X00: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-335-5653
Bail Handle

143355653
NO PRIMARY REF14-335-5653: RNCC: 3 | RNVC: 2
1041976: RNCC: 5 | RNVC: 9
A41976: RNCC: 5 | RNVC: 9
85-687-3142: RNCC: 6 | RNVC: 9

30 Jun 1976

5340-14-470-5133
Locking Stay

144705133
23212419-5: RNCC: 3 | RNVC: 2

22 Jun 1994

Load More Results