What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 21 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 21 of 446

5340-14-473-9467
Access Cover

144739467
39252377: RNCC: 3 | RNVC: 2
39252377: RNCC: 3 | RNVC: 9

18 Jan 1995

5340-14-458-0671
Block Clamp

144580671
SP108PPIS: RNCC: 3 | RNVC: 2

6 Oct 1992

5340-14-361-2030
Rod End Clevis

143612030
096858: RNCC: 3 | RNVC: 2
BAZ96858: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-482-8068
Mounting Plate

144828068
HSS831AHB311: RNCC: 3 | RNVC: 2
89167031: RNCC: 5 | RNVC: 2

25 Jul 1996

5340-14-516-2524
Access Cover

145162524
MB2570F00: RNCC: 3 | RNVC: 2

15 Sep 1999

5340-14-352-7782
Access Cover

143527782
280120: RNCC: 3 | RNVC: 2
280120: RNCC: 5 | RNVC: 2

14 Nov 1978

5340-14-397-8831
Rod End Clevis

143978831
0000050105: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-418-0741
Access Cover

144180741
006228: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-484-6561
Plug Button

144846561
29402927: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-397-9806
Retaining Strap

143979806
22385909: RNCC: 3 | RNVC: 2
22385909: RNCC: 5 | RNVC: 9

31 Jan 1985

5340-14-507-6919
Access Cover

145076919
10337019: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-424-2625
Access Cover

144242625
0308127470: RNCC: 3 | RNVC: 2
89436195: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-379-0226
Retaining Strap

143790226
2206-940A528: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-535-8953
Access Cover

145358953
9404660105: RNCC: 3 | RNVC: 2

27 Jun 2003

5340-14-526-2419
Mounting Plate

145262419
N117776: RNCC: 3 | RNVC: 2

11 Jul 2001

5340-14-345-0144
Quick Release Pin

143450144
001354282P: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-474-4008
Blank Panel

144744008
402A943: RNCC: 3 | RNVC: 2
402A943: RNCC: 5 | RNVC: 2

15 Feb 1995

5340-14-376-0543
Bail Handle

143760543
165875: RNCC: 3 | RNVC: 2

30 Mar 1982

5340-14-309-5460
Angle Bracket

143095460
70725065: RNCC: 3 | RNVC: 2
70725065: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-539-7695
Mounting Bracket

145397695
10714565000: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-14-518-0550
Mounting Plate

145180550
5010118023: RNCC: 3 | RNVC: 2

25 Jan 2000

5340-14-518-1633
Angle Bracket

145181633
5010093191: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-387-8145
Thumb Latch

143878145
G5750: RNCC: 3 | RNVC: 9

12 Oct 1983

5340-14-547-0166
Loop Clamp

145470166
999599: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-14-553-9642
Mounting Bracket

145539642
82104553000: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-14-457-1826
Mounting Plate

144571826
39467443: RNCC: 3 | RNVC: 2
39467443: RNCC: 5 | RNVC: 9

13 Aug 1992

5340-14-511-5444
Mounting Plate

145115444
14050950X: RNCC: 3 | RNVC: 2

23 Dec 1998

5340-14-522-2176
Metal Grille

145222176
GFCAA11: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-14-385-9119
Access Cover

143859119
142341303: RNCC: 3 | RNVC: 2
142341303: RNCC: 5 | RNVC: 2
76658: RNCC: 5 | RNVC: 2

24 Aug 1983

5340-14-349-3425
Rod End Clevis

143493425
305212: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-526-9558
Access Cover

145269558
10605738: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-202-5965
Bow Handle

142025965
0000361037: RNCC: 3 | RNVC: 2
0000361037: RNCC: 5 | RNVC: 9
361037: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-14-545-4666
Angle Bracket

145454666
RA1B701126211: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-545-4473
Block Clamp

145454473
RA1M701126923: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-473-3373
Mounting Plate

144733373
P712045: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-482-1161
Mounting Plate

144821161
3266-39: RNCC: 3 | RNVC: 2

20 Jun 1996

5340-14-384-7693
Handwheel

143847693
16761340: RNCC: 3 | RNVC: 2
16761340: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-392-8468
Access Cover

143928468
476010C: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-344-2458
Access Cover

143442458
393233: RNCC: 3 | RNVC: 2

10 Aug 1977

5340-14-439-7095
Access Cover

144397095
154283: RNCC: 3 | RNVC: 2
392927: RNCC: 5 | RNVC: 2

16 May 1990

5340-14-409-0929
Angle Bracket

144090929
4771620190: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-503-8675
Access Cover

145038675
39292694: RNCC: 3 | RNVC: 2
39292694: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-14-539-4355
Access Cover

145394355
4624260A: RNCC: 3 | RNVC: 2

14 Jan 2004

5340-14-532-4164
Mounting Bracket

145324164
RA1M701946131N1: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-358-4257
Retaining Strap

143584257
392508: RNCC: 3 | RNVC: 2

13 Aug 1979

5340-14-397-4304
Webbing Strap

143974304
100-50: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-254-9013
Access Cover

142549013
ST406M31P45: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-340-9975
Mending Plate

143409975
311862: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-522-1250
Lock-Release Lever

145221250
276941: RNCC: 3 | RNVC: 2
276941: RNCC: 5 | RNVC: 2

4 Oct 2000

5340-14-267-8096
Expansion Shield

142678096
PF12: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-397-1243
Mending Plate

143971243
20320977: RNCC: 3 | RNVC: 2
20320977: RNCC: 5 | RNVC: 9

1 Dec 1984

5340-14-456-4436
Angle Bracket

144564436
T896AA28: RNCC: 3 | RNVC: 2
5045945: RNCC: 5 | RNVC: 9
T896AA28: RNCC: 5 | RNVC: 9

2 Jul 1992

5340-14-469-1146
Webbing Strap

144691146
TB2010907: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-14-456-9465
Mounting Plate

144569465
A010M040: RNCC: 3 | RNVC: 9
A010M040: RNCC: 5 | RNVC: 2

30 Jul 1992

5340-14-360-5709
Retaining Strap

143605709
16558244: RNCC: 3 | RNVC: 2
16558244: RNCC: 5 | RNVC: 9

19 Dec 1979

5340-14-519-3298
Stand Base

145193298
E0251C0S: RNCC: 1 | RNVC: 2
ASNE0251C0S: RNCC: 3 | RNVC: 2
E0251C0S: RNCC: 5 | RNVC: 1
ASNE0251C0S: RNCC: 5 | RNVC: 2

15 Mar 2000

5340-14-031-7557
Corner Brace

140317557
0202121250: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-537-9167
Loop Clamp

145379167
944163: RNCC: 3 | RNVC: 2
COL1519: RNCC: 5 | RNVC: 2

4 Dec 2003

5340-14-333-2714
Mending Plate

143332714
15168258: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-450-6631
Pipe Hanger

144506631
623753: RNCC: 3 | RNVC: 2

16 Oct 1991

5340-14-500-5778
Mounting Bracket

145005778
7830: RNCC: 3 | RNVC: 2
F300 0T 024 5962: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-375-2876
Mending Plate

143752876
A266: RNCC: 3 | RNVC: 2
1122: RNCC: 5 | RNVC: 2

26 Feb 1982

5340-14-518-4584
Mounting Bracket

145184584
T537A2005157: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-360-8223
Butt Hinge

143608223
C2: RNCC: 3 | RNVC: 2
11376: RNCC: 5 | RNVC: 9

19 Dec 1979

5340-14-504-5308
Bumper

145045308
2634C304: RNCC: 3 | RNVC: 2

18 Feb 1998

5340-14-425-8895
Angle Bracket

144258895
058999L01TRA: RNCC: 3 | RNVC: 2
058999L: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-14-500-3876
Mounting Plate

145003876
E62102900002: RNCC: 3 | RNVC: 2
F300 0T 024 3977: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-504-3371
Mounting Bracket

145043371
3900669M91: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-500-8185
Section Block Clamp

145008185
E64009998065: RNCC: 3 | RNVC: 2
F300 0T 024 8387: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-446-1262
Mounting Bracket

144461262
71555: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-355-8918
Locking Stay

143558918
1093: RNCC: 3 | RNVC: 9

5 Apr 1979

5340-14-472-6666
Mounting Bracket

144726666
DRV66177: RNCC: 3 | RNVC: 2

9 Nov 1994

5340-14-415-0966
Retaining Strap

144150966
253231: RNCC: 3 | RNVC: 2
253231: RNCC: 5 | RNVC: 9

26 Mar 1987

5340-14-353-2153
Webbing Strap

143532153
356002030002: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-437-9711
Anchor Strap

144379711
5000495828: RNCC: 3 | RNVC: 2

5 Mar 1990

5340-14-250-6703
Retaining Strap

142506703
FL146690: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-357-1895
Pipe Hanger

143571895
A11A232260101A1: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-467-9637
Access Cover

144679637
1052473G00: RNCC: 3 | RNVC: 2

2 Feb 1994

5340-14-381-4629
Angle Bracket

143814629
2206-821A505: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-434-2225
Access Cover

144342225
30337769J: RNCC: 3 | RNVC: 2

13 Sep 1989

5340-14-354-7789
Anchor Strap

143547789
80333: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-526-9887
Access Cover

145269887
T257A0006162: RNCC: 3 | RNVC: 2

20 Sep 2001

5340-14-496-2881
Access Cover

144962881
2103620: RNCC: 3 | RNVC: 2
F300 0T 021 3495: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-537-5055
Access Cover

145375055
6501BTV236: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-313-7029
Rod End Clevis

143137029
0064762000: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-555-2207
Mounting Bracket

145552207
82350571000: RNCC: 3 | RNVC: 2

10 Oct 2007

5340-14-329-3525
Rod End Clevis

143293525
D37094B: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-523-7417
Utility Access Door

145237417
10350714: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-250-4462
Access Cover

142504462
ST406M52P59: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-529-6295
Access Cover

145296295
0008-3003-410: RNCC: 3 | RNVC: 2
SYB4894: RNCC: 5 | RNVC: 2

3 Apr 2002

5340-14-415-4584
Butt Hinge

144154584
195698: RNCC: 3 | RNVC: 2

18 May 1987

5340-14-354-2341
Access Cover

143542341
16320725: RNCC: 3 | RNVC: 2
16320725: RNCC: 5 | RNVC: 9

30 Jan 1979

5340-14-325-2113
Mending Plate

143252113
522390A: RNCC: 3 | RNVC: 2
522390: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-512-0873
Access Cover

145120873
0054293: RNCC: 3 | RNVC: 2
93163641: RNCC: 3 | RNVC: 9

3 Feb 1999

5340-14-541-7893
Access Cover

145417893
D64309004000: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-541-5880
Access Cover

145415880
834880: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-525-8096
Mounting Plate

145258096
H116015: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-408-6454
Rod End Clevis

144086454
160G732257: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-202-3890
Anchor Strap

142023890
0000235846: RNCC: 3 | RNVC: 2
235846: RNCC: 5 | RNVC: 9
0000235846: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-14-514-0516
Section Block Clamp

145140516
RA1M702504113N1: RNCC: 3 | RNVC: 2

22 Apr 1999

5340-14-475-4193
Access Cover

144754193
TS124008SC1: RNCC: 3 | RNVC: 2

5 Apr 1995

5340-14-341-7929
Anchor Strap

143417929
202890: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-474-8825
Rod End Clevis

144748825
567495: RNCC: 3 | RNVC: 2

8 Mar 1995

5340-14-354-7399
Rod End Clevis

143547399
120490: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-382-5984
Access Cover

143825984
16959717: RNCC: 3 | RNVC: 2
16959717: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-462-2421
Anchor Strap

144622421
T700A5710040900: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-14-345-2415
Rod End Clevis

143452415
A11A722214131: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-382-3248
Access Cover

143823248
209202: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-526-9897
Access Cover

145269897
T257A0006174: RNCC: 3 | RNVC: 2

20 Sep 2001

5340-14-546-7379
Access Cover

145467379
S257A7011137: RNCC: 3 | RNVC: 2

9 Aug 2005

5340-14-361-1993
Anchor Strap

143611993
BAZ95372: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-410-6914
Retaining Strap

144106914
251675: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-370-0508
Access Cover

143700508
398106011003: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-481-3603
Access Cover

144813603
10019568: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-481-3724
Access Hole Frame

144813724
065988G: RNCC: 3 | RNVC: 2
065988G: RNCC: 5 | RNVC: 2

1 May 1996

5340-14-525-2422
Access Cover

145252422
251767800300: RNCC: 3 | RNVC: 2
06820P017033: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-382-4961
Access Cover

143824961
16497523: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-536-9848
Utility Access Door

145369848
8040: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-400-8290
Access Cover

144008290
15441943: RNCC: 3 | RNVC: 2

21 May 1985

5340-14-549-8935
Access Cover

145498935
31106644: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-332-8671
Rod End Clevis

143328671
TH20N927: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-422-1658
Access Cover

144221658
8547362: RNCC: 3 | RNVC: 9
8547362: RNCC: 5 | RNVC: 2
008547362: RNCC: 5 | RNVC: 9

24 Feb 1988

5340-14-505-7138
Loop Clamp

145057138
062-110019: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-432-9776
Loop Clamp

144329776
51300002011: RNCC: 3 | RNVC: 2
9562811160: RNCC: 5 | RNVC: 2
11N11: RNCC: 5 | RNVC: 2

5 Jul 1989

5340-14-460-5558
Bumper

144605558
405951: RNCC: 3 | RNVC: 2
405951: RNCC: 5 | RNVC: 9

29 Jan 1993

5340-14-443-8761
Loop Clamp

144438761
51120605021: RNCC: 3 | RNVC: 2
24FE21: RNCC: 5 | RNVC: 2

11 Dec 1990

5340-14-520-2224
Access Cover

145202224
P720252: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-403-9357
Access Cover

144039357
110601: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-357-9227
Rod End Clevis

143579227
TLH0TB253: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-14-536-5858
Stand Base

145365858
56291498: RNCC: 3 | RNVC: 2

2 Sep 2003

5340-14-457-8584
Angle Bracket

144578584
T390AC30: RNCC: 3 | RNVC: 2
5046364: RNCC: 5 | RNVC: 9
T390AC30: RNCC: 5 | RNVC: 9

24 Sep 1992

5340-14-443-7405
Vent Plug

144437405
20290446: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-14-529-0405
Retaining Clip

145290405
52521: RNCC: 3 | RNVC: 9

6 Mar 2002

5340-14-416-4379
Mounting Plate

144164379
0692028N01: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-14-444-7334
Bumper

144447334
71098: RNCC: 3 | RNVC: 2

21 Jan 1991

5340-14-549-9369
Mounting Plate

145499369
51103866: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-543-9808
Mounting Plate

145439808
N00127002: RNCC: 3 | RNVC: 2

19 Dec 2004

5340-14-545-1604
Utility Access Door

145451604
085608D: RNCC: 3 | RNVC: 2

22 Mar 2005

5340-14-297-4607
Rim Lock Set

142974607
1000: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-448-0739
Cover Strip

144480739
PM1A711050119: RNCC: 3 | RNVC: 2
PM1A711050119: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-505-4890
Synchro Clamp

145054890
5000297671: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-479-8089
Access Cover

144798089
006A666: RNCC: 3 | RNVC: 2
1117418M00: RNCC: 5 | RNVC: 2
006A666: RNCC: 5 | RNVC: 9

7 Feb 1996

5340-14-515-3105
Lock Key

145153105
0009730413: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-370-6703
Webbing Strap

143706703
5000501152: RNCC: 3 | RNVC: 2
5000501152: RNCC: 5 | RNVC: 9

5 Jun 1981

5340-14-336-7257
Mending Plate

143367257
180527: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-493-3124
Mounting Bracket

144933124
601620: RNCC: 3 | RNVC: 2
F300 0T 012 1729: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-240-6712
Mounting Bracket

142406712
70249020: RNCC: 3 | RNVC: 2
249020: RNCC: 5 | RNVC: 9
70249020: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-484-8997
Access Cover

144848997
189316-211: RNCC: 3 | RNVC: 9

12 Dec 1996

5340-14-504-6269
Angle Bracket

145046269
510558501: RNCC: 3 | RNVC: 2
510558501: RNCC: 5 | RNVC: 9

25 Feb 1998

5340-14-467-7963
Angle Bracket

144677963
MB2454F00: RNCC: 3 | RNVC: 2

27 Jan 1994

5340-14-424-6834
Access Cover

144246834
30333398A: RNCC: 3 | RNVC: 2

2 Jun 1988

5340-14-459-1562
Mounting Bracket

144591562
16558658: RNCC: 3 | RNVC: 2
16558658: RNCC: 5 | RNVC: 9

19 Nov 1992

5340-14-371-6014
Loop Clamp

143716014
51100005063: RNCC: 3 | RNVC: 2
15N63: RNCC: 5 | RNVC: 2

5 Aug 1981

5340-14-549-8929
Runner

145498929
31106562: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-339-2976
Access Cover

143392976
184965: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-459-1468
Loop Clamp

144591468
16787639: RNCC: 3 | RNVC: 2
16787639: RNCC: 5 | RNVC: 9

19 Nov 1992

5340-14-505-5574
Access Cover

145055574
A548939: RNCC: 3 | RNVC: 2

25 Mar 1998

5340-14-470-4100
Mounting Bracket

144704100
0390740010: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-541-7894
Access Cover

145417894
D64309004001: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-277-7290
Retaining Strap

142777290
9145147: RNCC: 3 | RNVC: 2
9145147: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-497-4782
Mounting Bracket

144974782
B55279: RNCC: 3 | RNVC: 2
F300 0T 023 2430: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-480-0377
Mounting Plate

144800377
0743180S01: RNCC: 3 | RNVC: 2
F300 0T 020 7939: RNCC: 6 | RNVC: 9

21 Feb 1996

5340-14-439-1844
Access Cover

144391844
16008640: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-301-0484
Mending Plate

143010484
1030431607: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-500-9591
Bumper

145009591
E69401100002: RNCC: 3 | RNVC: 2
F300 0T 024 9803: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-483-5200
Corner Brace

144835200
1092539B00: RNCC: 3 | RNVC: 2

18 Sep 1996

5340-14-416-2218
Bow Handle

144162218
P01: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-516-4207
Mounting Bracket

145164207
8900.195: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-375-2921
Bumper

143752921
136-154: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-505-7151
Access Cover

145057151
30807-502: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-512-3422
Mounting Plate

145123422
160-25541-54: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-14-536-0380
Snap Hook

145360380
1004317: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-359-0677
Retaining Strap

143590677
A11A602221001: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-554-8845
Loop Clamp

145548845
78651RH14CP: RNCC: 1 | RNVC: 2
78651RH14CP: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-404-7110
Angle Bracket

144047110
20777751: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-508-9425
Butt Hinge

145089425
E4660017: RNCC: 3 | RNVC: 9

7 Oct 1998

5340-14-554-6923
Mounting Plate

145546923
05210403: RNCC: 3 | RNVC: 2

6 Aug 2007

5340-14-551-2924
Angle Bracket

145512924
RA1M705936122: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-442-2180
Rigid Caster

144422180
801107: RNCC: 3 | RNVC: 2
91712084: RNCC: 5 | RNVC: 2

3 Oct 1990

5340-14-500-7517
Section Block Clamp

145007517
E64009998209: RNCC: 3 | RNVC: 2
F300 0T 024 7714: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-540-3536
Loop Clamp

145403536
NNP5340848464397: RNCC: 3 | RNVC: 2

18 Mar 2004

5340-14-533-2474
Bridge Clamp

145332474
V102362: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-384-6697
Bow Handle

143846697
16959210: RNCC: 3 | RNVC: 2
16959210: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-529-8844
Bridge Clamp

145298844
OB0424: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-463-5525
Mounting Bracket

144635525
123401251: RNCC: 3 | RNVC: 9

17 Jun 1993

5340-14-513-0601
Mounting Bracket

145130601
009574035P: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-14-368-4509
Rod End Clevis

143684509
4051073: RNCC: 3 | RNVC: 2
9156: RNCC: 5 | RNVC: 2
4051073: RNCC: 5 | RNVC: 9
9156: RNCC: 5 | RNVC: 9

20 Feb 1981

5340-14-462-0491
Loop Clamp

144620491
CO14: RNCC: 3 | RNVC: 2
CO 14: RNCC: 5 | RNVC: 2

31 Mar 1993

5340-14-482-6138
Mounting Bracket

144826138
39061988: RNCC: 3 | RNVC: 2

18 Jul 1996

5340-14-549-8502
Mounting Bracket

145498502
2092281: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-473-3235
Block Clamp

144733235
33211556001: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-362-4756
Retaining Strap

143624756
5000110499: RNCC: 3 | RNVC: 2
5000110499: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-473-0546
Angle Bracket

144730546
29418472: RNCC: 3 | RNVC: 2

7 Dec 1994

5340-14-522-3151
Mounting Bracket

145223151
10371454: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-14-484-9019
Access Cover

144849019
189307-216: RNCC: 3 | RNVC: 9

12 Dec 1996

5340-14-364-9947
Access Cover

143649947
182536: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-14-285-1702
Rod End Clevis

142851702
270897: RNCC: 3 | RNVC: 2
270897: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-214-3792
Loop Clamp

142143792
514131050255: RNCC: 3 | RNVC: 2
38GT25: RNCC: 5 | RNVC: 2

1 Jan 1965

5340-14-488-1553
Angle Bracket

144881553
0320757210: RNCC: 3 | RNVC: 2

18 Apr 1997

5340-14-357-6822
Lock-Release Lever

143576822
0725-403: RNCC: 3 | RNVC: 2

27 Jun 1979

5340-14-438-3661
Mounting Bracket

144383661
8815450100: RNCC: 3 | RNVC: 2
89411439: RNCC: 5 | RNVC: 2

14 Mar 1990

5340-14-459-3779
Section Block Clamp

144593779
16787424: RNCC: 3 | RNVC: 2
16787424: RNCC: 5 | RNVC: 9

26 Nov 1992

5340-14-380-1128
Anchor Strap

143801128
BBZ0313: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-335-5447
Rod End Clevis

143355447
610-300-030-0: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-396-1382
Runner

143961382
4770301780: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-525-1819
Blank Panel

145251819
06310P105011: RNCC: 3 | RNVC: 2
14210270W: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-544-9662
Plug Button

145449662
61152702AB: RNCC: 3 | RNVC: 2

8 Mar 2005

5340-14-274-6487
Access Cover

142746487
DLT010120: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-545-5113
Mounting Bracket

145455113
95101Z01PYN00102: RNCC: 3 | RNVC: 2

18 Apr 2005

5340-14-349-5179
Retaining Strap

143495179
BN418-501F13K1: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-385-2917
Retaining Strap

143852917
ST450M4P59: RNCC: 3 | RNVC: 2
391931: RNCC: 5 | RNVC: 2

26 Jul 1983

5340-14-294-3523
Retaining Strap

142943523
0202140150: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-347-9493
Access Cover

143479493
TH20N962: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-470-1923
Access Cover

144701923
405317: RNCC: 3 | RNVC: 2

8 Jun 1994

5340-14-456-0380
Rod End Clevis

144560380
DA2C220112001Z01: RNCC: 3 | RNVC: 2

17 Jun 1992

5340-14-413-8610
Access Cover

144138610
185250: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-327-3145
Angle Bracket

143273145
3160S73-62-565: RNCC: 3 | RNVC: 2
85-687-3897: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-525-6582
Access Cover

145256582
87438: RNCC: 3 | RNVC: 2
20 242 030 9530: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-375-1631
Anchor Strap

143751631
0000481320: RNCC: 3 | RNVC: 2
481320: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-505-4374
Angle Bracket

145054374
12203009: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-226-5145
Retaining Strap

142265145
0000279232: RNCC: 3 | RNVC: 2
279232: RNCC: 5 | RNVC: 9
0000279232: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-539-4979
Bridge Clamp

145394979
094.51: RNCC: 3 | RNVC: 2
9451: RNCC: 5 | RNVC: 2

21 Jan 2004

5340-14-546-3786
Bridge Clamp

145463786
0000745774: RNCC: 3 | RNVC: 2

28 Jun 2005

5340-14-504-3368
Butt Hinge

145043368
3900660M91: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-545-9329
Angle Bracket

145459329
716656: RNCC: 3 | RNVC: 2

30 May 2005

5340-14-394-9456
Corner Brace

143949456
20320045: RNCC: 3 | RNVC: 2
20320045: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-419-8171
Rod End Clevis

144198171
DA2C121317835U1: RNCC: 3 | RNVC: 2

5 Nov 1987

5340-14-520-0172
Mounting Plate

145200172
10594019: RNCC: 3 | RNVC: 2

3 May 2000

5340-14-447-7731
Access Cover

144477731
29003307: RNCC: 3 | RNVC: 2

5 Jun 1991

5340-14-507-9254
Rod End Clevis

145079254
214005002: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-259-6503
Webbing Strap

142596503
159137: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-043-1750
Access Cover

140431750
069GA1-733188W: RNCC: 3 | RNVC: 2

10 Apr 1984

5340-14-537-9069
Mounting Bracket

145379069
10672583000: RNCC: 3 | RNVC: 2

3 Dec 2003

5340-14-301-9918
Retaining Strap

143019918
282361: RNCC: 3 | RNVC: 2
282361: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-484-1715
Loop Clamp

144841715
HV6202053: RNCC: 3 | RNVC: 2

31 Oct 1996

5340-14-513-6691
Synchro Clamp

145136691
307-212-602-0: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-14-314-5267
Bow Handle

143145267
30102: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-504-3071
Access Cover

145043071
3701243M2: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-318-0638
Access Cover

143180638
0210097110: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-210-6598
Rod End Clevis

142106598
88169: RNCC: 3 | RNVC: 2
18470-02: RNCC: 3 | RNVC: 9

1 Jan 1964

5340-14-419-9464
Access Cover

144199464
100113: RNCC: 3 | RNVC: 2
100113: RNCC: 5 | RNVC: 2

10 Nov 1987

5340-14-461-7672
Plate Spacer

144617672
4772820420: RNCC: 3 | RNVC: 2
5046091: RNCC: 5 | RNVC: 9

24 Mar 1993

5340-14-042-9820
Angle Bracket

140429820
80-300536-3: RNCC: 3 | RNVC: 2

30 Mar 1982

5340-14-398-9872
Access Cover

143989872
M118600: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-376-4384
Rod End Clevis

143764384
0000479587: RNCC: 3 | RNVC: 2
479587: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-446-0154
Retaining Strap

144460154
2723503MI: RNCC: 3 | RNVC: 2

4 Mar 1991

5340-14-523-4929
Cover Strip

145234929
01-250-444: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-14-550-4198
Access Cover

145504198
2756860120: RNCC: 3 | RNVC: 2

20 Jun 2006

5340-14-534-7191
Mounting Bracket

145347191
10593670: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-493-5580
Access Cover

144935580
417205: RNCC: 3 | RNVC: 2
F300 0T 013 5518: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-367-3867
Mending Plate

143673867
970851: RNCC: 3 | RNVC: 2
970851: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-259-6463
Rod End Clevis

142596463
BFC14030: RNCC: 3 | RNVC: 2
BY148A14030: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-497-4146
Locking Stay

144974146
1031500: RNCC: 3 | RNVC: 2
1031500: RNCC: 5 | RNVC: 2
F300 0T 023 1442: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-526-9700
Mounting Bracket

145269700
10523542: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-508-7560
Access Cover

145087560
46943044: RNCC: 3 | RNVC: 2
46943044: RNCC: 5 | RNVC: 9

30 Sep 1998

5340-14-286-5188
Access Cover

142865188
79031633: RNCC: 3 | RNVC: 2
79031633: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-369-0688
Access Cover

143690688
7044P: RNCC: 3 | RNVC: 9
7044: RNCC: 5 | RNVC: 9
7044: RNCC: 5 | RNVC: 9

17 Apr 1981

5340-14-541-8416
Mounting Bracket

145418416
F1262189: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-480-8353
Mounting Plate

144808353
10021609: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-14-518-3636
Mounting Bracket

145183636
10353110: RNCC: 3 | RNVC: 2

2 Feb 2000

5340-14-548-1478
Mounting Plate

145481478
82127442001: RNCC: 3 | RNVC: 2

12 Dec 2005

5340-14-521-1487
Clamping Catch

145211487
GE18CH: RNCC: 3 | RNVC: 2

12 Jul 2000

5340-14-226-5203
Rod End Clevis

142265203
706318: RNCC: 3 | RNVC: 9
062706318: RNCC: 5 | RNVC: 9
76297: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-555-2965
Access Cover

145552965
L642A2028102: RNCC: 3 | RNVC: 2

23 Oct 2007

5340-14-357-0239
Runner

143570239
0012595002: RNCC: 3 | RNVC: 2
0012595002: RNCC: 5 | RNVC: 9

7 Jun 1979

5340-14-375-7971
Retaining Band

143757971
16295403: RNCC: 3 | RNVC: 2
16295403: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-437-6407
Cover Strip

144376407
PM1A196220036: RNCC: 3 | RNVC: 2
PM1A196220036: RNCC: 5 | RNVC: 2

7 Feb 1990

5340-14-548-1592
Mounting Bracket

145481592
5430068975: RNCC: 3 | RNVC: 2

13 Dec 2005

5340-14-382-1498
Anchor Strap

143821498
0031335031: RNCC: 3 | RNVC: 2
0031335031: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-415-1571
Retaining Clip

144151571
K302: RNCC: 3 | RNVC: 2

16 Apr 1987

5340-14-514-6626
Synchro Clamp

145146626
86075: RNCC: 3 | RNVC: 2

7 Jun 1999

5340-14-397-5204
Loop Clamp

143975204
065T13-698642Q: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-455-8577
Mounting Bracket

144558577
4772202610: RNCC: 3 | RNVC: 2
5044872: RNCC: 5 | RNVC: 9

11 Jun 1992

5340-14-544-3130
Lock-Release Lever

145443130
AMPC GENE E223514: RNCC: 3 | RNVC: 2

19 Jan 2005

5340-14-506-7134
Buckle

145067134
02240: RNCC: 3 | RNVC: 2

12 May 1998

5340-14-406-0642
Webbing Strap

144060642
006106210P: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-308-4749
Expansion Plug

143084749
000043701: RNCC: 3 | RNVC: 2
43701: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-263-4495
Retaining Strap

142634495
M104786: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-493-5985
Mounting Plate

144935985
1220600: RNCC: 3 | RNVC: 2
F300 0T 013 7643: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-542-1907
Loop Clamp

145421907
262101308: RNCC: 3 | RNVC: 2
262101308: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-551-7339
Mounting Bracket

145517339
RA1M701566837: RNCC: 3 | RNVC: 2

19 Oct 2006

5340-14-420-7027
Angle Bracket

144207027
39229743: RNCC: 3 | RNVC: 2
39229743: RNCC: 5 | RNVC: 9

16 Dec 1987

5340-14-403-9296
Angle Bracket

144039296
21857-1: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-460-5973
Access Cover

144605973
462443AA: RNCC: 3 | RNVC: 2
462443AA: RNCC: 3 | RNVC: 9

4 Feb 1993

5340-14-534-8556
Access Cover

145348556
10656866: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-14-316-9143
Anchor Strap

143169143
000MA0427F4REPAH44L21: RNCC: 3 | RNVC: 2
000MA427F32REPAH44L21: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-440-3990
Access Cover

144403990
A33252-1: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-384-3174
Loop Clamp

143843174
28GE22: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-348-0048
Retaining Strap

143480048
26251656: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-402-6312
Bumper

144026312
404090: RNCC: 3 | RNVC: 2
BGE404090: RNCC: 5 | RNVC: 2

19 Jul 1985

5340-14-353-0197
Angle Bracket

143530197
A11A232260010: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-505-4375
Clip Retainer Plate

145054375
12203011: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-509-0441
Access Cover

145090441
10509775: RNCC: 3 | RNVC: 2

16 Oct 1998

5340-14-313-8928
Loop Clamp

143138928
51210605020: RNCC: 3 | RNVC: 2
20F20: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-528-5594
Angle Bracket

145285594
375507: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-467-9762
Angle Bracket

144679762
EDM1118: RNCC: 3 | RNVC: 2
39515374: RNCC: 5 | RNVC: 2

2 Feb 1994

5340-14-512-0400
Mounting Plate

145120400
0052920: RNCC: 3 | RNVC: 2

3 Feb 1999

5340-14-377-3835
Handwheel

143773835
53733145: RNCC: 3 | RNVC: 9
53733145: RNCC: 5 | RNVC: 2

17 May 1982

5340-14-444-8865
Plug Button

144448865
0446549P00: RNCC: 3 | RNVC: 2

28 Jan 1991

5340-14-495-7475
Synchro Clamp

144957475
10214243: RNCC: 3 | RNVC: 2
F300 0T 019 9373: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-430-0374
Access Cover

144300374
29688097: RNCC: 3 | RNVC: 2
29688097: RNCC: 5 | RNVC: 9

27 Feb 1989

5340-14-469-7780
Access Cover

144697780
303321: RNCC: 3 | RNVC: 2

10 May 1994

5340-14-376-4720
Mounting Bracket

143764720
16559853: RNCC: 3 | RNVC: 2
16559853: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-351-5032
Control Rod

143515032
484170W: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-504-5047
Access Cover

145045047
220112801: RNCC: 3 | RNVC: 2

18 Feb 1998

5340-14-396-1872
Plug Button

143961872
456064817: RNCC: 3 | RNVC: 9

27 Nov 1984

5340-14-519-8542
Access Cover

145198542
F1390401: RNCC: 3 | RNVC: 2

12 Apr 2000

5340-14-539-5783
Access Cover

145395783
10645267: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-309-7856
Retaining Strap

143097856
106073000902: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-482-9651
Shelf Bracket

144829651
PM1A713140151: RNCC: 3 | RNVC: 2
PM1A713140151: RNCC: 5 | RNVC: 2

1 Aug 1996

5340-14-298-8734
Mending Plate

142988734
180017: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-485-2023
Angle Bracket

144852023
T2239AA15: RNCC: 3 | RNVC: 2
T2239AA15: RNCC: 5 | RNVC: 9

10 Jan 1997

5340-14-469-4977
Angle Bracket

144694977
5005028007: RNCC: 3 | RNVC: 2

27 Apr 1994

5340-14-341-7885
Retaining Strap

143417885
201819: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-473-9430
Mounting Bracket

144739430
20858398: RNCC: 3 | RNVC: 2
20858398: RNCC: 3 | RNVC: 9

18 Jan 1995

5340-14-520-6323
Retaining Clip

145206323
064299001: RNCC: 3 | RNVC: 9
064299853921: RNCC: 5 | RNVC: 9

26 May 2000

5340-14-425-9104
Angle Bracket

144259104
BFP00536: RNCC: 3 | RNVC: 2

28 Jul 1988

5340-14-546-6873
Mounting Bracket

145466873
5010616789: RNCC: 3 | RNVC: 2

2 Aug 2005

5340-14-457-2837
Mounting Bracket

144572837
ZF07531062: RNCC: 3 | RNVC: 2
7531062: RNCC: 5 | RNVC: 2

20 Aug 1992

5340-14-514-0537
Angle Bracket

145140537
RA1M704115610N1: RNCC: 3 | RNVC: 2

22 Apr 1999

5340-14-541-7765
Beam Gripping Clamp

145417765
1002830: RNCC: 3 | RNVC: 2
1004292: RNCC: 5 | RNVC: 2
WIRE GRIDER GRIP: RNCC: 5 | RNVC: 9

26 Jun 2004

5340-14-357-8847
Runner

143578847
976688: RNCC: 3 | RNVC: 2
976688: RNCC: 5 | RNVC: 9

20 Jul 1979

5340-14-531-3288
Pipe Hanger

145313288
CRB201830003B1: RNCC: 3 | RNVC: 2

8 Aug 2002

5340-14-382-5619
Angle Bracket

143825619
16497193: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-518-1695
Mounting Bracket

145181695
5010096742: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-535-2857
Mounting Bracket

145352857
56644780AB: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-538-7733
Handwheel

145387733
NGM0011040318835: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-445-0576
Detent Plunger

144450576
72194: RNCC: 3 | RNVC: 2
89412099: RNCC: 5 | RNVC: 2

31 Jan 1991

5340-14-369-9532
Retaining Strap

143699532
398106011020: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-541-7956
Angle Bracket

145417956
E66504800003: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-370-1311
Loop Clamp

143701311
70277302: RNCC: 3 | RNVC: 2
70277302: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-407-1921
Detent Plunger

144071921
600524: RNCC: 3 | RNVC: 2

12 Feb 1986

5340-14-445-0520
Angle Bracket

144450520
532394: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-14-437-4244
Mounting Plate

144374244
3005026: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-410-6288
Retaining Strap

144106288
404212: RNCC: 3 | RNVC: 2
BGE404212: RNCC: 5 | RNVC: 2

9 Jul 1986

5340-14-504-6337
Lock Bolt

145046337
F00189043: RNCC: 3 | RNVC: 2
F00189043: RNCC: 5 | RNVC: 9

25 Feb 1998

5340-14-405-2629
Retaining Strap

144052629
221412Q: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-397-5900
Lock Key

143975900
C31124: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-501-5974
Angle Bracket

145015974
45594878: RNCC: 3 | RNVC: 2
45594878: RNCC: 5 | RNVC: 2
F300 0T 025 0230: RNCC: 6 | RNVC: 9

5 Nov 1997

5340-14-541-0558
Strap Fastener Loop

145410558
10478756: RNCC: 3 | RNVC: 2

11 May 2004

5340-14-343-9168
Screw Hook

13 Jul 1977

5340-14-520-5579
Strap Fastener Loop

145205579
01017521: RNCC: 3 | RNVC: 2
01017521: RNCC: 5 | RNVC: 9

22 May 2000

5340-14-353-3533
Loop Clamp

143533533
25GE6-5: RNCC: 3 | RNVC: 2
24GE6-5: RNCC: 5 | RNVC: 2

8 Dec 1978

5340-14-549-3541
Blank Panel

145493541
8256-1: RNCC: 3 | RNVC: 2

24 Mar 2006

5340-14-333-8702
Clamping Catch

143338702
16-7-3440: RNCC: 3 | RNVC: 2

23 Apr 1976

5340-14-558-0686
Utility Access Door

145580686
210803-3: RNCC: 3 | RNVC: 2

28 Aug 2008

5340-14-468-1408
Runner

144681408
NO PRIMARY REF14-468-1408: RNCC: 3 | RNVC: 2
21-769-900: RNCC: 5 | RNVC: 9

9 Feb 1994

5340-14-479-0643
Roller Holder

144790643
23223114-8: RNCC: 3 | RNVC: 2

13 Dec 1995

5340-14-512-5935
Eye Hook

145125935
201098: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-357-8399
Flush Catch Claw

143578399
5000117956: RNCC: 3 | RNVC: 2
5000117956: RNCC: 5 | RNVC: 9

20 Jul 1979

5340-14-522-4549
Angle Bracket

145224549
121A63-255-49-0: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-14-398-6445
Webbing Strap

143986445
B80CAT2-8M: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-432-6335
Access Cover

144326335
4H006285-00: RNCC: 3 | RNVC: 9

19 Jun 1989

5340-14-260-7562
Access Cover

142607562
210112-23: RNCC: 3 | RNVC: 2
210112-23: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-419-8465
Flush Catch Claw

144198465
111885-5: RNCC: 3 | RNVC: 2
R40216044REP5: RNCC: 5 | RNVC: 2

5 Nov 1987

5340-14-436-2675
Anchor Strap

144362675
ST442M15P52: RNCC: 3 | RNVC: 2
1211614P001: RNCC: 5 | RNVC: 2
ST442M15P52: RNCC: 5 | RNVC: 9

12 Dec 1989

5340-14-404-5206
Access Cover

144045206
356960: RNCC: 3 | RNVC: 2
356960: RNCC: 5 | RNVC: 9

20 Nov 1985

5340-14-289-3232
Access Cover

142893232
0044520010: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-353-5866
Rod End Clevis

143535866
0033853071: RNCC: 3 | RNVC: 2
0033853071: RNCC: 5 | RNVC: 9

16 Jan 1979

5340-14-367-4135
Anchor Strap

143674135
15146673: RNCC: 3 | RNVC: 2
15146673: RNCC: 5 | RNVC: 2
15146673: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-501-0323
Access Cover

145010323
10422043: RNCC: 3 | RNVC: 2
F300 0T 025 0622: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-445-0741
Access Cover

144450741
5171623700: RNCC: 3 | RNVC: 2
89174014: RNCC: 5 | RNVC: 2

31 Jan 1991

5340-14-357-8426
Access Cover

143578426
5000495625: RNCC: 3 | RNVC: 2
5000495625: RNCC: 5 | RNVC: 9

20 Jul 1979

5340-14-525-5990
Access Cover

145255990
10 146 400 1420: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-359-6764
Access Cover

143596764
638: RNCC: 3 | RNVC: 2

15 Oct 1979

5340-14-546-1144
Kick Door Plate

145461144
190112258-2: RNCC: 3 | RNVC: 2
190112258-2: RNCC: 5 | RNVC: 2

14 Jun 2005

5340-14-304-3046
Angle Bracket

143043046
121S71-270-55-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-341-1528
Loop Clamp

143411528
30G8-5: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-471-9658
Angle Bracket

144719658
65686.8: RNCC: 3 | RNVC: 2
P02373: RNCC: 5 | RNVC: 2

28 Sep 1994

5340-14-436-7426
Angle Bracket

144367426
BB5388-2: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-549-7409
Mounting Plate

145497409
C70706-1: RNCC: 3 | RNVC: 2

5 May 2006

5340-14-551-3526
Angle Bracket

145513526
RA1N702506437: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-334-4612
Webbing Strap

143344612
120210: RNCC: 3 | RNVC: 2

1 Jun 1976

5340-14-325-4102
Retaining Strap

143254102
2-19960: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-530-8171
Lock Bolt

145308171
S-MCL3T: RNCC: 3 | RNVC: 2
SYB5437: RNCC: 5 | RNVC: 2

8 Jul 2002

5340-14-215-3827
Quick Release Pin

142153827
54102: RNCC: 3 | RNVC: 2
340730625: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-446-7204
Metal Grille

144467204
20122594: RNCC: 3 | RNVC: 2
20122594: RNCC: 5 | RNVC: 9

9 Apr 1991

5340-14-401-6140
Bail Handle

144016140
79092546: RNCC: 3 | RNVC: 2
79092546: RNCC: 5 | RNVC: 9

13 Jun 1985

5340-14-382-1334
Control Rod

143821334
45-2N2F608: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-375-8206
Access Cover

143758206
16558563: RNCC: 3 | RNVC: 2
16558563: RNCC: 5 | RNVC: 9
16558563: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-041-2419
Mortise Lock Set

140412419
5283TC2CHR0ME: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-325-0886
Access Cover

143250886
M607193: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-353-1290
Anchor Strap

143531290
16612202: RNCC: 3 | RNVC: 2
16612202: RNCC: 3 | RNVC: 9

8 Dec 1978

5340-14-383-3620
Anchor Strap

143833620
7700571817: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-512-0404
Access Cover

145120404
100760: RNCC: 3 | RNVC: 2
0003871: RNCC: 3 | RNVC: 2

3 Feb 1999

5340-14-462-0474
Pawl Fastener

144620474
4MP12130259: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-305-7896
Access Cover

143057896
S33E68DET14: RNCC: 3 | RNVC: 2
S34E68DET14: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-436-7210
Access Cover

144367210
TS90540: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-529-5229
Webbing Strap

145295229
3160S73-76-055: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-369-9783
Anchor Strap

143699783
F125406: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-470-5072
Track Stop

144705072
23210018-2: RNCC: 3 | RNVC: 2

22 Jun 1994

5340-14-366-8740
Retaining Strap

143668740
330A87-2241-20: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-514-0760
Pawl Fastener Set

145140760
PM1A005001N12: RNCC: 3 | RNVC: 2
PM1A005001N12: RNCC: 5 | RNVC: 2
MJBV: RNCC: 5 | RNVC: 9

22 Apr 1999

5340-14-469-0271
Bumper

144690271
416-10102-000: RNCC: 3 | RNVC: 2
85-695-2480: RNCC: 6 | RNVC: 9

30 Mar 1994

5340-14-326-4252
Flush Catch Claw

143264252
28697: RNCC: 3 | RNVC: 2
100913: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-398-8889
Access Cover

143988889
22382623: RNCC: 3 | RNVC: 2
22382623: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-512-8031
Access Cover

145128031
177082: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-468-7391
Access Door Hinge

144687391
PM1A713100072: RNCC: 3 | RNVC: 2
PM1A713100072: RNCC: 5 | RNVC: 2

16 Mar 1994

5340-14-327-0858
Access Cover

143270858
444464: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-382-9914
Anchor Strap

143829914
005292986P: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-383-4567
Access Cover

143834567
20071689: RNCC: 3 | RNVC: 2
20071689: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-502-5222
Access Cover

145025222
5000676964: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-512-7335
Plug Button

145127335
800033759: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-512-5772
Access Cover

145125772
3BM02187AAAA: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-384-0712
Access Cover

143840712
978712: RNCC: 3 | RNVC: 2
978712: RNCC: 5 | RNVC: 2
978712: RNCC: 5 | RNVC: 9

4 May 1983

5340-14-351-2034
Anchor Strap

143512034
208595: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-549-7302
Access Cover

145497302
61355177AA: RNCC: 3 | RNVC: 2

4 May 2006

5340-14-524-1984
Access Cover

145241984
10617107: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-520-0896
Access Cover

145200896
3K99-538: RNCC: 3 | RNVC: 2

10 May 2000

5340-14-420-0659
Anchor Strap

144200659
47174-736: RNCC: 3 | RNVC: 2

18 Nov 1987

5340-14-507-9979
Eye Hook

145079979
4773121020: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-549-4300
Angle Bracket

145494300
21244345-0: RNCC: 3 | RNVC: 2

3 Apr 2006

5340-14-421-6683
Access Cover

144216683
356208: RNCC: 3 | RNVC: 2

25 Jan 1988

5340-14-423-7201
Anchor Strap

144237201
706261: RNCC: 3 | RNVC: 2
1170626100: RNCC: 5 | RNVC: 2

28 Apr 1988

5340-14-403-4664
Access Cover

144034664
91474698: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-212-5710
Access Cover

142125710
10814: RNCC: 3 | RNVC: 2
FD2881: RNCC: 3 | RNVC: 2
10814: RNCC: 3 | RNVC: 9

1 Jan 1964

5340-14-526-1831
Mounting Bracket

145261831
46039141: RNCC: 3 | RNVC: 2

6 Jul 2001

5340-14-320-6341
Belt-Strap Keeper

143206341
248594: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-531-5994
Bridge Clamp

145315994
3818D013: RNCC: 3 | RNVC: 2
3818D013: RNCC: 3 | RNVC: 2

3 Sep 2002

5340-14-446-1282
Eye Hook

144461282
72698: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-379-3219
Permanent Magnet

143793219
6BSUPE X: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-471-7821
Access Cover

144717821
P01840: RNCC: 3 | RNVC: 2

14 Sep 1994

5340-14-361-1640
Quick Release Pin

143611640
108404601: RNCC: 3 | RNVC: 2
108404601: RNCC: 5 | RNVC: 2

24 Jan 1980

5340-14-364-5907
Loop Clamp

143645907
5005005113: RNCC: 3 | RNVC: 2
5000114302: RNCC: 5 | RNVC: 2
5000114302: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-423-0588
Retaining Strap

144230588
39232555: RNCC: 3 | RNVC: 2
39232555: RNCC: 5 | RNVC: 9

31 Mar 1988

5340-14-449-0114
Swivel Caster

144490114
TP4BD125-23L: RNCC: 3 | RNVC: 2
91713941: RNCC: 5 | RNVC: 2

24 Jul 1991

5340-14-365-7042
Runner

143657042
099301L: RNCC: 3 | RNVC: 2

8 Oct 1980

5340-14-277-8585
Cover Strip

142778585
3160S25-11-764-51: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-312-0856
Flush Catch Claw

143120856
175325: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-453-1562
Access Cover

144531562
16285404: RNCC: 3 | RNVC: 2

5 Feb 1992

5340-14-514-0752
Pawl Fastener Set

145140752
PM1A005001N04: RNCC: 3 | RNVC: 2
PM1A005001N04: RNCC: 5 | RNVC: 2
MJBM: RNCC: 5 | RNVC: 9

22 Apr 1999

5340-14-381-5488
Anchor Strap

143815488
398002010007: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-339-1013
Detent Plunger

143391013
SP1-01-05-07: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-470-9320
Mounting Bracket

144709320
330A68-1631-20: RNCC: 3 | RNVC: 2
F300 0T 015 7274: RNCC: 5 | RNVC: 9

13 Jul 1994

5340-14-421-8794
Access Cover

144218794
5005-11142REP3: RNCC: 3 | RNVC: 2

9 Feb 1988

5340-14-366-4625
Access Cover

143664625
BBZ0824: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-317-8082
Threaded Rod End

143178082
A2-65625: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-250-3298
Access Cover

142503298
151182: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-552-7170
Angle Bracket

145527170
0027818: RNCC: 3 | RNVC: 2

25 Jan 2007

5340-14-542-3034
Mounting Plate

145423034
988905523: RNCC: 3 | RNVC: 2
988905523: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-368-1065
Strapping Seal

143681065
1: RNCC: 3 | RNVC: 2
161: RNCC: 3 | RNVC: 2
AGRAFE1: RNCC: 5 | RNVC: 2

19 Jan 1981

5340-14-554-3305
Mounting Bracket

145543305
82104505001: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-471-6730
Runner

144716730
5410004B: RNCC: 3 | RNVC: 2

7 Sep 1994

5340-14-483-5228
Mounting Plate

144835228
1090289Q00: RNCC: 3 | RNVC: 2

18 Sep 1996

5340-14-533-5422
Mounting Bracket

145335422
F1260107: RNCC: 3 | RNVC: 2

10 Feb 2003

5340-14-308-6541
Rod End Clevis

143086541
595114-100-10GBCL: RNCC: 3 | RNVC: 2
595114-100-10GBCL: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-398-6462
Mortise Lock Set

143986462
273DR0ITE: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-514-0459
Angle Bracket

145140459
RA1M112111051: RNCC: 3 | RNVC: 2

22 Apr 1999

5340-14-450-2119
Anchor Strap

144502119
5000987353: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-513-8842
Lock Key

145138842
21257: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-550-2226
Mounting Plate

145502226
RPWM54-1: RNCC: 3 | RNVC: 2

12 Jun 2006

5340-14-335-3425
Pipe Hanger

143353425
192552: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-489-8394
Cushioning Pad

144898394
763391F4/4: RNCC: 3 | RNVC: 2

25 Aug 1997

5340-14-366-1150
Quick Release Pin

143661150
051997: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-339-2933
Webbing Strap

143392933
CH44-3-2: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-436-2690
Mending Plate

144362690
230150004: RNCC: 3 | RNVC: 9

12 Dec 1989

5340-14-339-3688
Anchor Strap

143393688
0244600: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-494-4828
Access Cover

144944828
T54 692 90: RNCC: 3 | RNVC: 2
F300 0T 017 3882: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-379-4391
Anchor Strap

143794391
2206-341A517: RNCC: 3 | RNVC: 2

1 Oct 1982

5340-14-548-6272
Angle Bracket

145486272
RA1M702506261A1: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-399-0498
Quick Release Pin

143990498
473073K: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-508-5358
Access Cover

145085358
FH152009013: RNCC: 3 | RNVC: 2
FH152009003: RNCC: 3 | RNVC: 9

16 Sep 1998

5340-14-293-9929
Retaining Strap

142939929
2-11940: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-323-5596
Webbing Strap

143235596
001740221P: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-458-1355
Mounting Bracket

144581355
70426-907: RNCC: 3 | RNVC: 2
5045502: RNCC: 5 | RNVC: 9

8 Oct 1992

5340-14-523-2879
Retaining Band

145232879
RA1M701936311: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-421-6003
Access Cover

144216003
20734853: RNCC: 3 | RNVC: 2
20734853: RNCC: 5 | RNVC: 9

20 Jan 1988

5340-14-544-2750
Butt Hinge

145442750
0 363 01 022 0: RNCC: 3 | RNVC: 2

14 Jan 2005

5340-14-225-9120
Friction Catch

142259120
278770: RNCC: 3 | RNVC: 2
278770: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-524-4540
Pawl Fastener

145244540
81.7.2106: RNCC: 3 | RNVC: 2
SYB2173: RNCC: 5 | RNVC: 2

21 Mar 2001

5340-14-431-2825
Quick Release Pin

144312825
620C12T64: RNCC: 3 | RNVC: 2

12 Apr 1989

5340-14-454-1660
Access Cover

144541660
26007588-7: RNCC: 3 | RNVC: 2

24 Mar 1992

5340-14-394-9183
Access Cover

143949183
20733733: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-547-5488
Swivel Caster

145475488
478 575: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-514-9097
Mounting Plate

145149097
240072: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-14-547-6097
Rigid Caster

145476097
B-RD125R: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-14-549-5578
Mounting Plate

145495578
21252361-2: RNCC: 3 | RNVC: 2

14 Apr 2006

5340-14-288-4791
Locking Stay

142884791
4102582: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-460-0668
Rod End Connector

144600668
PM1A196160003: RNCC: 3 | RNVC: 2
PM1A196160003: RNCC: 5 | RNVC: 2

7 Jan 1993

5340-14-296-9429
Retaining Band

142969429
160330: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-322-3602
Angle Bracket

143223602
M427449: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-250-3614
Retaining Strap

142503614
ST406M52P610: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-545-2611
Mounting Bracket

145452611
S215A40A1001: RNCC: 1 | RNVC: 2
A152111-1: RNCC: 3 | RNVC: 2

30 Mar 2005

5340-14-500-9868
Access Door Hinge

145009868
NO PRIMARY REF14-500-9868: RNCC: 3 | RNVC: 2
A09030420: RNCC: 5 | RNVC: 9
F300 0T 025 0081: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-544-0527
Mounting Plate

145440527
AMPC ENER E227330: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-14-552-8740
Mounting Bracket

145528740
1819724: RNCC: 3 | RNVC: 2

9 Feb 2007

5340-14-381-3177
Anchor Strap

143813177
2206-481B524: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-461-2923
Mounting Bracket

144612923
5000728949: RNCC: 3 | RNVC: 2
89287687: RNCC: 5 | RNVC: 2

3 Mar 1993

5340-14-434-9235
Angle Bracket

144349235
3511 191 78511: RNCC: 3 | RNVC: 2

10 Oct 1989

5340-14-440-5551
Access Cover

144405551
004634177: RNCC: 3 | RNVC: 9
4634177: RNCC: 5 | RNVC: 2

17 Jul 1990

5340-14-482-2415
Access Cover

144822415
NO PRIMARY REF14-482-2415: RNCC: 3 | RNVC: 2
Y53844: RNCC: 5 | RNVC: 9

27 Jun 1996

5340-14-506-3079
Mounting Bracket

145063079
10351138: RNCC: 3 | RNVC: 2

22 Apr 1998

5340-14-312-1140
Synchro Clamp

143121140
158088: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-423-8195
Loop Clamp

144238195
R18S: RNCC: 3 | RNVC: 2

28 Apr 1988

5340-14-442-2873
Bumper

144422873
0C075176980: RNCC: 3 | RNVC: 2
0C075176980: RNCC: 5 | RNVC: 2
00075176980: RNCC: 5 | RNVC: 2

9 Oct 1990

5340-14-513-3190
Lock Bolt

145133190
10365601: RNCC: 3 | RNVC: 2

15 Mar 1999

5340-14-325-1688
Plug Button

143251688
4302008: RNCC: 3 | RNVC: 2
4302008: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-378-9098
Loop Clamp

143789098
5000080311: RNCC: 3 | RNVC: 2
5000080311: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-14-542-5069
Access Cover

145425069
61201124AA: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-14-540-6208
Mounting Bracket

145406208
38051015: RNCC: 3 | RNVC: 2
00070A: RNCC: 5 | RNVC: 2
4848ZG8613180048: RNCC: 6 | RNVC: 9

8 Apr 2004

Load More Results