What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 20 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 20 of 446

5340-14-551-2647
Cover Strip

145512647
RA1M701936411: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-445-5031
Mounting Bracket

144455031
ST406M52P60: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-534-7252
Mounting Bracket

145347252
10640616: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-515-8649
Bow Handle

145158649
46038762: RNCC: 3 | RNVC: 2

18 Aug 1999

5340-14-450-1954
Mounting Bracket

144501954
29413723: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-438-2327
Mounting Plate

144382327
DA2C286477411: RNCC: 3 | RNVC: 2

7 Mar 1990

5340-14-400-9614
Loop Clamp

144009614
21S0401003: RNCC: 3 | RNVC: 2
21S0401003: RNCC: 5 | RNVC: 2

21 May 1985

5340-14-531-2451
Mounting Bracket

145312451
P710629: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-14-354-2892
Bumper

143542892
531673: RNCC: 3 | RNVC: 2
00531673: RNCC: 5 | RNVC: 2

30 Jan 1979

5340-14-553-8474
Rigid Caster

145538474
E18551: RNCC: 3 | RNVC: 2

23 May 2007

5340-14-502-3026
Mounting Bracket

145023026
3BM01597AAAA: RNCC: 3 | RNVC: 2
3BM01597AAAA: RNCC: 5 | RNVC: 9

9 Dec 1997

5340-14-366-2796
Angle Bracket

143662796
A11A221176291: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-448-0601
Catch Strike

144480601
PM1A620310303: RNCC: 3 | RNVC: 2
PM1A620310303: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-508-0404
Catch Strike

145080404
AC.149-IP: RNCC: 3 | RNVC: 2
AC149IP: RNCC: 5 | RNVC: 2
8921600018: RNCC: 5 | RNVC: 9

26 Aug 1998

5340-14-389-9397
Catch Strike

143899397
4-000011-000060: RNCC: 3 | RNVC: 2
4-011-0060: RNCC: 5 | RNVC: 2

26 Jan 1984

5340-14-509-9845
Latch Bar

145099845
NO PRIMARY REF14-509-9845: RNCC: 3 | RNVC: 2
22895-04U03: RNCC: 5 | RNVC: 9
5340AA1131750: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-206-8364
Catch Strike

142068364
701450001230: RNCC: 3 | RNVC: 2
7014-50CD: RNCC: 5 | RNVC: 2
70-14CD: RNCC: 5 | RNVC: 2
7014-5: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-416-1485
Catch Strike

144161485
AC.109-IB: RNCC: 3 | RNVC: 2
AC109IB: RNCC: 5 | RNVC: 2

3 Jun 1987

5340-14-358-2574
Catch Strike

143582574
3511-131-15511: RNCC: 3 | RNVC: 2
3511 131 15511: RNCC: 5 | RNVC: 2

13 Aug 1979

5340-14-518-9802
Catch Strike

145189802
706107: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-516-7634
Catch Strike

145167634
448532: RNCC: 3 | RNVC: 2
448532-001: RNCC: 5 | RNVC: 9

13 Oct 1999

5340-14-370-8862
Catch Strike

143708862
365A21-3403-91: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-369-9441
Catch Strike

143699441
398002161102: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-461-4816
Catch Strike

144614816
AC.106-IB: RNCC: 3 | RNVC: 2
AC106IB: RNCC: 5 | RNVC: 2
91313860: RNCC: 5 | RNVC: 9

10 Mar 1993

5340-14-348-6723
Spring Window Bolt

143486723
002693210M: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-14-455-3109
Spring Window Bolt

144553109
317603: RNCC: 3 | RNVC: 2
317603: RNCC: 5 | RNVC: 9

21 May 1992

5340-14-437-5790
Catch Strike

144375790
AC.119-CH: RNCC: 3 | RNVC: 2
AC119CH: RNCC: 5 | RNVC: 2
91628989: RNCC: 5 | RNVC: 2

7 Feb 1990

5340-14-504-6161
Catch Strike

145046161
09.44522: RNCC: 3 | RNVC: 2
09.44522ZI: RNCC: 3 | RNVC: 2
0944522ZI: RNCC: 3 | RNVC: 2
CAE01420: RNCC: 5 | RNVC: 2
09-44522Z1: RNCC: 5 | RNVC: 9

25 Feb 1998

5340-14-426-3368
Access Cover

144263368
24110020300: RNCC: 3 | RNVC: 2
241100203: RNCC: 5 | RNVC: 9
650504: RNCC: 5 | RNVC: 9

23 Aug 1988

5340-14-474-8478
Mounting Plate

144748478
MC1006F00: RNCC: 3 | RNVC: 2

8 Mar 1995

5340-14-505-6409
Mounting Bracket

145056409
D25001035000: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-533-6596
Mounting Bracket

145336596
F1262293: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-14-417-0581
Mounting Plate

144170581
1568-42: RNCC: 3 | RNVC: 2
7932566427: RNCC: 5 | RNVC: 2

1 Jul 1987

5340-14-551-9795
Mounting Bracket

145519795
82171277000: RNCC: 3 | RNVC: 2

15 Nov 2006

5340-14-457-6588
Webbing Strap

144576588
B1500-CAT2-LG1M: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-367-5853
Anchor Strap

143675853
144760507: RNCC: 3 | RNVC: 2
144760507: RNCC: 5 | RNVC: 2

19 Jan 1981

5340-14-380-7897
Utility Access Door

143807897
16985497: RNCC: 3 | RNVC: 2

14 Dec 1982

5340-14-540-7400
Access Cover

145407400
38052152: RNCC: 3 | RNVC: 2
209930: RNCC: 5 | RNVC: 2
4848ZG8613181582: RNCC: 6 | RNVC: 9

23 Apr 2004

5340-14-417-7347
Butt Hinge

144177347
DA2C88P029010: RNCC: 3 | RNVC: 2
91615617: RNCC: 5 | RNVC: 2

22 Jul 1987

5340-14-388-7256
Rod End Clevis

143887256
QM407: RNCC: 3 | RNVC: 2
92E0118: RNCC: 5 | RNVC: 2

3 Nov 1983

5340-14-370-0261
Angle Bracket

143700261
75101079: RNCC: 3 | RNVC: 2
5000535624: RNCC: 5 | RNVC: 2
5000535624: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-504-8272
Access Cover

145048272
8816643000: RNCC: 3 | RNVC: 2

4 Mar 1998

5340-14-288-0304
Loop Clamp

142880304
0264300610: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-551-5220
Mounting Plate

145515220
RA1M702202381: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-445-4592
Mounting Bracket

144454592
AMD23233: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-532-1364
Mounting Plate

145321364
5010559926: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-14-535-5553
Mounting Bracket

145355553
16047948: RNCC: 3 | RNVC: 2
16047948: RNCC: 5 | RNVC: 2

4 Jun 2003

5340-14-424-9603
Mounting Bracket

144249603
DA2C201941A1: RNCC: 3 | RNVC: 2

15 Jun 1988

5340-14-540-7369
Mounting Bracket

145407369
38051035: RNCC: 3 | RNVC: 2
00305A: RNCC: 5 | RNVC: 2
4848ZG8613181025: RNCC: 6 | RNVC: 9

22 Apr 2004

5340-14-343-1369
Bumper

143431369
ST406M63P189: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-555-6303
Retaining Strap

145556303
19227063: RNCC: 3 | RNVC: 2

4 Dec 2007

5340-14-552-6496
Loop Clamp

145526496
51313102006: RNCC: 3 | RNVC: 2
21G6: RNCC: 5 | RNVC: 2

19 Jan 2007

5340-14-454-2543
Mounting Plate

144542543
16348095: RNCC: 3 | RNVC: 2

26 Mar 1992

5340-14-527-4075
Mounting Plate

145274075
P106025V: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-527-2596
Retaining Strap

145272596
143234: RNCC: 3 | RNVC: 9

17 Oct 2001

5340-14-410-6454
Anchor Strap

144106454
BGE401124: RNCC: 3 | RNVC: 2
401124: RNCC: 5 | RNVC: 2

9 Jul 1986

5340-14-350-4262
Angle Bracket

143504262
214497: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-547-8799
Access Cover

145478799
5010650165: RNCC: 3 | RNVC: 2

22 Nov 2005

5340-14-482-8488
Loop Clamp

144828488
445083: RNCC: 3 | RNVC: 2

27 Jul 1996

5340-14-549-4628
Utility Access Door

145494628
15032: RNCC: 3 | RNVC: 2

6 Apr 2006

5340-14-517-6391
Mounting Plate

145176391
CRM280110593A1: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-551-2622
Mounting Bracket

145512622
S47249: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-283-9066
Mending Plate

142839066
465140: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-372-1136
Runner

143721136
BS644: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-475-2351
Loop Clamp

144752351
0235905020: RNCC: 3 | RNVC: 2
F300 0T 018 4345: RNCC: 5 | RNVC: 9

22 Mar 1995

5340-14-520-2578
Mounting Bracket

145202578
201385: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-551-2766
Angle Bracket

145512766
RA1M706515351: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-479-7193
Mounting Bracket

144797193
2253216Y00: RNCC: 3 | RNVC: 2

31 Jan 1996

5340-14-212-5590
Bumper

142125590
0549149400: RNCC: 3 | RNVC: 2
0549149400: RNCC: 3 | RNVC: 2
5491494: RNCC: 5 | RNVC: 2
0549149400: RNCC: 5 | RNVC: 9
5491494: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-394-9688
Angle Bracket

143949688
20321100: RNCC: 3 | RNVC: 2
20321100: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-565-6819
Utility Access Door

145656819
MDS81A275: RNCC: 3 | RNVC: 2

15 Sep 2010

5340-14-536-3468
Mounting Bracket

145363468
3300101: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-14-410-7573
Webbing Strap

144107573
11338: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-545-1122
Angle Bracket

145451122
RA1A701126713: RNCC: 3 | RNVC: 2

18 Mar 2005

5340-14-409-3705
Detent Plunger

144093705
4771622300: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-357-0032
Rim Lock

143570032
2141991: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-367-3837
Butt Hinge

143673837
253553: RNCC: 3 | RNVC: 2
253553: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-461-0878
Loop Clamp

144610878
LN400011F4REPD2: RNCC: 3 | RNVC: 2
RAB0585: RNCC: 5 | RNVC: 2

24 Feb 1993

5340-14-505-2373
Access Cover

145052373
45104941: RNCC: 3 | RNVC: 2

16 Mar 1998

5340-14-518-5546
Mounting Plate

145185546
5000704443: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-462-7366
Synchro Clamp

144627366
PM1A728315002: RNCC: 3 | RNVC: 2
PM1A728315002: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-548-8118
Access Cover

145488118
RA1M622322820A1: RNCC: 3 | RNVC: 2

14 Feb 2006

5340-14-460-9178
Mounting Bracket

144609178
TB4011819: RNCC: 3 | RNVC: 2

16 Feb 1993

5340-14-533-9702
Rod End Clevis

145339702
56294054: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-501-0348
Access Cover

145010348
10290781: RNCC: 3 | RNVC: 2
F300 0T 025 0649: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-512-8495
Rod End Clevis

145128495
222256: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-548-2317
Bumper

145482317
43801022: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-14-457-6595
Webbing Strap

144576595
A1500-CAT5-LG2,5M: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-517-3487
Access Cover

145173487
45381798: RNCC: 3 | RNVC: 2

6 Dec 1999

5340-14-528-0867
Access Cover

145280867
DA1N292380N1: RNCC: 3 | RNVC: 2

14 Dec 2001

5340-14-412-6389
Rim Lock

144126389
60072W: RNCC: 3 | RNVC: 2
60072W: RNCC: 5 | RNVC: 9

20 Oct 1986

5340-14-450-4836
Mounting Bracket

144504836
5171725700: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-14-450-1982
Bow Handle

144501982
29421331: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-524-1222
Loop Clamp

145241222
51215305034: RNCC: 3 | RNVC: 2
20S34: RNCC: 5 | RNVC: 2

2 Mar 2001

5340-14-357-0395
Loop Clamp

143570395
388083: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-533-7988
Mounting Plate

145337988
F1262622: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-538-3762
Spring Holder

145383762
NGM0010036240522: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-549-8853
Runner

145498853
21106612: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-513-8759
Angle Bracket

145138759
648209: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-522-6133
Angle Bracket

145226133
2351004: RNCC: 3 | RNVC: 2

8 Nov 2000

5340-14-414-9018
Slide Keeper

144149018
57382C: RNCC: 3 | RNVC: 2

23 Mar 1987

5340-14-545-6953
Angle Bracket

145456953
RA1M703856421: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-484-0405
Rod End Clevis

144840405
R12608B12AELZ: RNCC: 2 | RNVC: 2
R12608B12AELZ: RNCC: 3 | RNVC: 9
99206750: RNCC: 5 | RNVC: 2

17 Oct 1996

5340-14-489-5319
Angle Bracket

144895319
20231561: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-14-532-3651
Runner

145323651
RA1M260513413: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-392-5343
Retaining Strap

143925343
254117: RNCC: 3 | RNVC: 2
254117: RNCC: 5 | RNVC: 9

21 Mar 1984

5340-14-464-3005
Rod End Clevis

144643005
ST406M42G37: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-430-4427
Clamping Catch

144304427
FA560: RNCC: 3 | RNVC: 2
FA560: RNCC: 3 | RNVC: 9
FA0560: RNCC: 5 | RNVC: 2
0003566016: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-512-8331
Access Cover

145128331
212242: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-394-9754
Webbing Strap

143949754
29664260: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-434-0566
Mounting Bracket

144340566
023792Z: RNCC: 3 | RNVC: 2

1 Sep 1989

5340-14-497-9012
Angle Bracket

144979012
0315777230: RNCC: 3 | RNVC: 2

22 Oct 1997

5340-14-515-4204
Access Cover

145154204
41130024A: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-275-9858
Rod End Clevis

142759858
889605: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-482-6821
Rod End Clevis

144826821
36212: RNCC: 3 | RNVC: 2

18 Jul 1996

5340-14-280-9598
Rod End Clevis

142809598
404783: RNCC: 3 | RNVC: 9

1 Jan 1971

5340-14-526-1123
Mounting Plate

145261123
20 242 160 7160: RNCC: 3 | RNVC: 2

4 Jul 2001

5340-14-444-5097
Access Cover

144445097
123010308REP2: RNCC: 3 | RNVC: 9

14 Jan 1991

5340-14-324-5910
Angle Bracket

143245910
M116661: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-335-3469
Anchor Strap

143353469
191808: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-500-9199
Mounting Plate

145009199
D67200000006: RNCC: 3 | RNVC: 2
F300 0T 024 9408: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-533-4331
Loop Clamp

145334331
21FE15: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-515-5230
Bumper

145155230
9403172104: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-474-1714
Access Cover

144741714
30311619: RNCC: 3 | RNVC: 2
30311619Y: RNCC: 5 | RNVC: 2

1 Feb 1995

5340-14-520-6058
Access Cover

145206058
45215618: RNCC: 3 | RNVC: 2
45215618: RNCC: 5 | RNVC: 2

24 May 2000

5340-14-358-4152
Retaining Strap

143584152
394573: RNCC: 3 | RNVC: 2

13 Aug 1979

5340-14-357-2226
Loop Clamp

143572226
19306162: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-372-6149
Access Cover

143726149
0000710485: RNCC: 3 | RNVC: 2
0000710485: RNCC: 5 | RNVC: 9

21 Sep 1981

5340-14-435-0125
Rod End Clevis

144350125
520-972: RNCC: 3 | RNVC: 2

11 Oct 1989

5340-14-548-6134
Mounting Bracket

145486134
RA1A704886317A1: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-350-4527
Anchor Strap

143504527
207262: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-204-2236
Loop Clamp

142042236
MT18GN: RNCC: 3 | RNVC: 2
MT18GN: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-14-526-2523
Access Cover

145262523
10569961: RNCC: 3 | RNVC: 2

11 Jul 2001

5340-14-351-9913
Butt Hinge

143519913
32349: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-429-0442
Retaining Strap

144290442
158720: RNCC: 3 | RNVC: 2
89279065: RNCC: 5 | RNVC: 2
204669: RNCC: 5 | RNVC: 2

4 Jan 1989

5340-14-497-4941
Metal Grille

144974941
1017858M00: RNCC: 3 | RNVC: 2
F300 0T 023 2675: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-248-9513
Access Cover

142489513
0133G352: RNCC: 3 | RNVC: 9
0133G352: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-434-1926
Angle Bracket

144341926
552750: RNCC: 3 | RNVC: 2

12 Sep 1989

5340-14-210-1145
Mending Plate

142101145
725524: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-549-4273
Mounting Bracket

145494273
P527350CG: RNCC: 3 | RNVC: 2

3 Apr 2006

5340-14-407-7414
Runner

144077414
543041: RNCC: 3 | RNVC: 2

27 Feb 1986

5340-14-370-5533
Mounting Plate

143705533
1184423: RNCC: 3 | RNVC: 2
1184423: RNCC: 5 | RNVC: 2

18 May 1981

5340-14-520-5977
Mounting Bracket

145205977
16170868: RNCC: 3 | RNVC: 2

24 May 2000

5340-14-235-2857
Rod End Clevis

142352857
122291-185: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-546-9668
Cover Strip

145469668
RA1B721325724A1N1: RNCC: 3 | RNVC: 2

12 Sep 2005

5340-14-376-2139
Mending Plate

143762139
12271: RNCC: 3 | RNVC: 2
12271: RNCC: 5 | RNVC: 2

30 Mar 1982

5340-14-544-3554
Mounting Plate

145443554
AMPC GENE E224315: RNCC: 3 | RNVC: 2

24 Jan 2005

5340-14-400-4916
Expansion Shield

144004916
DLT151130REP56: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-464-8625
Stand Base

144648625
008538228P: RNCC: 3 | RNVC: 2

3 Sep 1993

5340-14-539-9764
Bumper

145399764
45040-D1315: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-531-9887
Mounting Bracket

145319887
5010323560: RNCC: 3 | RNVC: 2

4 Oct 2002

5340-14-521-2901
Access Cover

145212901
10487513: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-457-8635
Mounting Bracket

144578635
5000744605: RNCC: 3 | RNVC: 2
89287797: RNCC: 5 | RNVC: 2

24 Sep 1992

5340-14-560-4413
Utility Access Door

145604413
399887A1: RNCC: 3 | RNVC: 2

20 Apr 2009

5340-14-357-0031
Rim Lock

143570031
2141996: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-482-6953
Cable Retractor

144826953
30EC3FP040220C8K: RNCC: 3 | RNVC: 2

20 Jul 1996

5340-14-311-3600
Retaining Strap

143113600
186909: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-407-2002
Mounting Plate

144072002
AMG220126: RNCC: 3 | RNVC: 2
674017: RNCC: 5 | RNVC: 9

12 Feb 1986

5340-14-549-0599
Angle Bracket

145490599
RA1A704714360N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-500-5727
Mounting Plate

145005727
7353: RNCC: 3 | RNVC: 2
F300 0T 024 5911: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-545-9830
Pipe Hanger

145459830
RPL711400075: RNCC: 3 | RNVC: 2

1 Jun 2005

5340-14-506-2303
Mounting Plate

145062303
F1251209: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-14-358-1184
Clamping Catch

143581184
842: RNCC: 3 | RNVC: 2
0190205T00: RNCC: 5 | RNVC: 2

13 Aug 1979

5340-14-409-0751
Anchor Strap

144090751
4771621160: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-274-3760
Door Handle

142743760
10212: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-480-2263
Mounting Plate

144802263
0870283K00: RNCC: 3 | RNVC: 2

28 Feb 1996

5340-14-470-4640
Snap Hook

144704640
2315: RNCC: 3 | RNVC: 2
1080792T00: RNCC: 5 | RNVC: 2

22 Jun 1994

5340-14-471-0984
Blank Panel

144710984
M4DZ7101952601: RNCC: 3 | RNVC: 2

27 Jul 1994

5340-14-333-0404
Retaining Strap

143330404
C62138: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-430-8845
Bumper

144308845
B53073: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-14-279-2170
Angle Bracket

142792170
12509929: RNCC: 3 | RNVC: 2
12509929: RNCC: 3 | RNVC: 9

1 Jan 1971

5340-14-553-5317
Mounting Bracket

145535317
7420984709: RNCC: 3 | RNVC: 2

12 Apr 2007

5340-14-508-5169
Mounting Bracket

145085169
10418716: RNCC: 3 | RNVC: 2

16 Sep 1998

5340-14-563-5128
Utility Resilient Mount

145635128
7700434628: RNCC: 3 | RNVC: 2

15 Feb 2010

5340-14-418-1777
Mounting Plate

144181777
29687682: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-547-5624
Mounting Bracket

145475624
RA1M704756151: RNCC: 3 | RNVC: 2

16 Oct 2005

5340-14-375-2938
Clamping Catch

143752938
4796: RNCC: 3 | RNVC: 2
34334: RNCC: 5 | RNVC: 2

26 Feb 1982

5340-14-472-2098
Angle Bracket

144722098
1042499K00: RNCC: 3 | RNVC: 2

12 Oct 1994

5340-14-459-6081
Angle Bracket

144596081
45390752: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-522-6933
Mounting Plate

145226933
01112510: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-14-372-2972
Access Cover

143722972
102323805: RNCC: 3 | RNVC: 2
102323805: RNCC: 5 | RNVC: 2
1402322136: RNCC: 5 | RNVC: 2

1 Sep 1981

5340-14-536-2620
Access Cover

145362620
10550301: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-14-501-6553
Runner

145016553
46230173: RNCC: 3 | RNVC: 2
46230173: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-366-2849
Anchor Strap

143662849
A11A602215101: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-514-0512
Section Block Clamp

145140512
RA1M701934311: RNCC: 3 | RNVC: 2

22 Apr 1999

5340-14-370-0290
Access Cover

143700290
75203300: RNCC: 3 | RNVC: 2
5001000195: RNCC: 5 | RNVC: 2
5000808609: RNCC: 5 | RNVC: 2
5001000195: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-402-6420
Anchor Strap

144026420
1525740008: RNCC: 3 | RNVC: 2

19 Jul 1985

5340-14-354-7385
Access Cover

143547385
120467: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-505-0466
Access Cover

145050466
5003074019: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-348-0368
Clamping Catch

143480368
969365: RNCC: 3 | RNVC: 2
969365: RNCC: 5 | RNVC: 9

29 Mar 1978

5340-14-312-1058
Detent Plunger

143121058
175527: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-525-8346
Bumper

145258346
F135136: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-422-7937
Mounting Bracket

144227937
20326970: RNCC: 3 | RNVC: 2
20326970: RNCC: 5 | RNVC: 9

17 Mar 1988

5340-14-384-6607
Access Cover

143846607
16761559: RNCC: 3 | RNVC: 2
16761559: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-357-9447
Loop Clamp

143579447
388648: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-14-399-6971
Access Cover

143996971
253781: RNCC: 3 | RNVC: 2
253781: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-402-7206
Rod End Clevis

144027206
70204: RNCC: 3 | RNVC: 2

19 Jul 1985

5340-14-344-2135
Retaining Strap

143442135
ST406M52P509: RNCC: 3 | RNVC: 2

10 Aug 1977

5340-14-475-3997
Loop Clamp

144753997
51311703008: RNCC: 3 | RNVC: 2
575486: RNCC: 5 | RNVC: 2

5 Apr 1995

5340-14-524-0420
Mounting Bracket

145240420
GFACA78: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-14-540-6507
Mounting Plate

145406507
38051378: RNCC: 3 | RNVC: 2
437818: RNCC: 5 | RNVC: 2
4848ZG8613180203: RNCC: 6 | RNVC: 9

14 Apr 2004

5340-14-481-3679
Webbing Strap

144813679
10279355: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-551-3637
Angle Bracket

145513637
5171645900: RNCC: 3 | RNVC: 2

13 Sep 2006

5340-14-282-8549
Loop Clamp

142828549
51100005036: RNCC: 3 | RNVC: 2
15N36: RNCC: 5 | RNVC: 2
15NA36: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-554-0961
Loop Clamp

145540961
604 129: RNCC: 3 | RNVC: 2
604 129: RNCC: 3 | RNVC: 2

11 Jun 2007

5340-14-545-0639
Loop Clamp

145450639
1816025226: RNCC: 3 | RNVC: 2
19220181: RNCC: 3 | RNVC: 2

16 Mar 2005

5340-14-425-8311
Butt Hinge

144258311
9023CPV63013A: RNCC: 3 | RNVC: 2

21 Jul 1988

5340-14-539-8343
Mounting Bracket

145398343
10660750: RNCC: 3 | RNVC: 2

11 Feb 2004

5340-14-526-9453
Cover Strip

145269453
01-250-716: RNCC: 3 | RNVC: 2
SZ01.250.716: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-451-9783
Support Hook

144519783
007519010P: RNCC: 3 | RNVC: 2

17 Dec 1991

5340-14-501-2064
Mounting Plate

145012064
40280001: RNCC: 3 | RNVC: 2
F300 0T 025 2469: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-450-6944
Loop Clamp

144506944
5000815983: RNCC: 3 | RNVC: 2
89471978: RNCC: 5 | RNVC: 2

16 Oct 1991

5340-14-042-7082
Webbing Strap

140427082
10000054: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-464-3186
Angle Bracket

144643186
5260125: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-522-8900
Bumper

145228900
96183658: RNCC: 3 | RNVC: 2
8015962S00: RNCC: 5 | RNVC: 2
96183658: RNCC: 5 | RNVC: 9

6 Dec 2000

5340-14-541-3282
Mending Plate

145413282
589925: RNCC: 3 | RNVC: 2

27 May 2004

5340-14-377-5693
Access Cover

143775693
325814: RNCC: 3 | RNVC: 2
325814: RNCC: 5 | RNVC: 9

10 Jun 1982

5340-14-375-1644
Anchor Strap

143751644
0000486579: RNCC: 3 | RNVC: 2
486579: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-528-9461
Loop Clamp

145289461
EN4113F09WH: RNCC: 2 | RNVC: 2

27 Feb 2002

5340-14-343-6924
Access Hole Frame

143436924
4770010660: RNCC: 3 | RNVC: 2

13 Jul 1977

5340-14-419-2924
Retaining Strap

144192924
534791: RNCC: 3 | RNVC: 2

16 Oct 1987

5340-14-475-0340
Mounting Bracket

144750340
059985K01TRA: RNCC: 3 | RNVC: 2
059985K: RNCC: 5 | RNVC: 2

16 Mar 1995

5340-14-209-8375
Access Cover

142098375
73252: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-549-8804
Angle Bracket

145498804
2093280: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-536-8684
Butt Hinge

145368684
1110-U52: RNCC: 3 | RNVC: 2

17 Sep 2003

5340-14-457-5370
Mounting Bracket

144575370
160R742538: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-272-8517
Loop Clamp

142728517
12509445: RNCC: 3 | RNVC: 2
12509445: RNCC: 3 | RNVC: 9

1 Jan 1971

5340-14-522-4335
Mounting Plate

145224335
91590948: RNCC: 3 | RNVC: 2
4322 021 31904: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-14-416-0770
Anchor Strap

144160770
8473204410: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-519-6280
Utility Access Door

145196280
5000047021: RNCC: 3 | RNVC: 2

24 Mar 2000

5340-14-551-1195
Access Cover

145511195
46242057: RNCC: 3 | RNVC: 2

28 Aug 2006

5340-14-300-9304
Access Cover

143009304
184726: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-514-9063
Lock Bolt

145149063
206107: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-14-422-9161
Retaining Strap

144229161
253724: RNCC: 3 | RNVC: 2

24 Mar 1988

5340-14-450-1702
Mounting Bracket

144501702
92PD260116: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-266-4584
Angle Bracket

142664584
450627: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-519-9163
Self-Locking Insert

145199163
MF006AA108B: RNCC: 3 | RNVC: 2
1114321M00: RNCC: 5 | RNVC: 2

19 Apr 2000

5340-14-432-4020
Mounting Bracket

144324020
A2H13041: RNCC: 3 | RNVC: 2

9 Jun 1989

5340-14-325-6146
Loop Clamp

143256146
511153050561: RNCC: 3 | RNVC: 2
35S56: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-409-7252
Mounting Plate

144097252
108286: RNCC: 3 | RNVC: 9

28 May 1986

5340-14-481-1706
Bridge Clamp

144811706
009072010P: RNCC: 3 | RNVC: 2

24 Apr 1996

5340-14-459-5899
Mounting Bracket

144595899
320415: RNCC: 3 | RNVC: 2
320415: RNCC: 5 | RNVC: 9

10 Dec 1992

5340-14-554-1189
Loop Clamp

145541189
352 1214: RNCC: 3 | RNVC: 2
352 1214: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-541-5246
Angle Bracket

145415246
1091555: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-516-1593
Loop Clamp

145161593
3123-9608003: RNCC: 3 | RNVC: 9

14 Sep 1999

5340-14-522-6101
Mounting Bracket

145226101
2341006: RNCC: 3 | RNVC: 2

8 Nov 2000

5340-14-477-4288
Swivel Caster

144774288
391D100: RNCC: 3 | RNVC: 2
0234492R00: RNCC: 5 | RNVC: 2

30 Aug 1995

5340-14-551-2891
Angle Bracket

145512891
RA1M701926441N1: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-516-8445
Loop Clamp

145168445
HB300G12: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-14-385-2475
Access Cover

143852475
26013: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-504-2593
Mounting Bracket

145042593
3610513M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-545-7571
Access Cover

145457571
211643: RNCC: 3 | RNVC: 2

10 May 2005

5340-14-474-3317
Butt Hinge

144743317
CHAR200: RNCC: 3 | RNVC: 2

8 Feb 1995

5340-14-448-0850
Cover Strip

144480850
PM1A239107002: RNCC: 3 | RNVC: 2
PM1A239107002: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-403-9363
Runner

144039363
4771520440: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-372-0045
Runner

143720045
16316838: RNCC: 3 | RNVC: 2
16316838: RNCC: 5 | RNVC: 9

1 Sep 1981

5340-14-439-2922
Cover Strip

144392922
DA2C261035051: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-274-3268
Loop Clamp

142743268
12509290: RNCC: 3 | RNVC: 2
12509290: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-540-6492
Mounting Bracket

145406492
38051415: RNCC: 3 | RNVC: 2
438846: RNCC: 5 | RNVC: 2
4848ZG8613180228: RNCC: 6 | RNVC: 9

14 Apr 2004

5340-14-462-4037
Retaining Strap

144624037
Z89022024: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-14-349-9313
Rod End Clevis

143499313
131275: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-462-6867
Mounting Bracket

144626867
970969: RNCC: 3 | RNVC: 2
970969: RNCC: 5 | RNVC: 9

28 Apr 1993

5340-14-342-4561
Mending Plate

143424561
ST406M12P107: RNCC: 3 | RNVC: 2

16 May 1977

5340-14-500-5157
Retaining Strap

145005157
2710: RNCC: 3 | RNVC: 9
F300 0T 024 5330: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-414-0192
Retaining Strap

144140192
BFC20815: RNCC: 3 | RNVC: 2
89172004: RNCC: 5 | RNVC: 2

22 Jan 1987

5340-14-532-6749
Mounting Bracket

145326749
19221779: RNCC: 3 | RNVC: 2

27 Nov 2002

5340-14-553-2924
Mounting Bracket

145532924
BA143PS: RNCC: 3 | RNVC: 2

21 Mar 2007

5340-14-516-0748
Mounting Bracket

145160748
N26015055110220: RNCC: 3 | RNVC: 2

8 Sep 1999

5340-14-416-5424
Mounting Bracket

144165424
3CM0983: RNCC: 3 | RNVC: 2

17 Jun 1987

5340-14-404-5178
Access Cover

144045178
325503: RNCC: 3 | RNVC: 2
325503: RNCC: 5 | RNVC: 9

20 Nov 1985

5340-14-397-9144
Access Cover

143979144
475090C: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-432-9340
Handle Grip

144329340
0880563L01: RNCC: 3 | RNVC: 2

4 Jul 1989

5340-14-456-9184
Expansion Plug

144569184
E29584A52AAT: RNCC: 2 | RNVC: 2
K7AA520T: RNCC: 5 | RNVC: 2

30 Jul 1992

5340-14-412-4563
Retaining Strap

144124563
ST406M42P25: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-14-400-8142
Loop Clamp

144008142
513131050251: RNCC: 3 | RNVC: 2
31G25: RNCC: 5 | RNVC: 2

21 May 1985

5340-14-527-4080
Mounting Plate

145274080
P106060V: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-529-8755
Loop Clamp

145298755
461890: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-494-4840
Mounting Bracket

144944840
T54 867 10: RNCC: 3 | RNVC: 2
F300 0T 017 3894: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-543-2173
Mounting Bracket

145432173
706142: RNCC: 3 | RNVC: 2

31 Aug 2004

5340-14-480-7852
Loop Clamp

144807852
EN4113S11NR: RNCC: 2 | RNVC: 2

29 Mar 1996

5340-14-551-2637
Synchro Clamp

145512637
R47629: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-288-0303
Access Cover

142880303
0264980070: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-555-7432
Mounting Bracket

145557432
S622A2024101: RNCC: 3 | RNVC: 2

11 Dec 2007

5340-14-397-8775
Plug Button

143978775
102327601: RNCC: 3 | RNVC: 2
0659180007: RNCC: 5 | RNVC: 2

31 Jan 1985

5340-14-436-2031
Mounting Plate

144362031
DA2C228551001U1: RNCC: 3 | RNVC: 2

6 Dec 1989

5340-14-545-6884
Fusible Plug

145456884
7090.6027: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-439-5177
Angle Bracket

144395177
006568080P: RNCC: 3 | RNVC: 2

11 May 1990

5340-14-464-3151
Mounting Bracket

144643151
406532213: RNCC: 3 | RNVC: 9

28 Jul 1993

5340-14-549-9254
Mounting Bracket

145499254
2092542: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-552-5736
Vent Plug

145525736
714247: RNCC: 3 | RNVC: 2

17 Jan 2007

5340-14-416-6866
Angle Bracket

144166866
412902120013: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-466-1827
Mounting Plate

144661827
166093: RNCC: 3 | RNVC: 2
89170195: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-461-6732
Mounting Bracket

144616732
0000776961: RNCC: 3 | RNVC: 2
TID25141: RNCC: 5 | RNVC: 2

22 Mar 1993

5340-14-457-6061
Angle Bracket

144576061
PM1A835402001: RNCC: 3 | RNVC: 2
PM1A835402001: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-213-3112
Loop Clamp

142133112
500907: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-214-3786
Loop Clamp

142143786
514131190085: RNCC: 3 | RNVC: 2
38GT8: RNCC: 5 | RNVC: 2

1 Jan 1965

5340-14-554-9298
Mounting Bracket

145549298
1524355: RNCC: 3 | RNVC: 2

10 Sep 2007

5340-14-455-5261
Protection Bellows

144555261
10135215: RNCC: 3 | RNVC: 2

26 May 1992

5340-14-479-2321
Access Cover

144792321
85235-ABG: RNCC: 3 | RNVC: 2
85235-ABG: RNCC: 5 | RNVC: 2
85235-ABG: RNCC: 5 | RNVC: 9

19 Dec 1995

5340-14-446-1249
Mounting Bracket

144461249
190988: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-497-5844
Mounting Plate

144975844
1T32: RNCC: 3 | RNVC: 2
F300 0T 023 3875: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-409-0537
Anchor Strap

144090537
73139: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-551-2765
Angle Bracket

145512765
RA1M706515211: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-543-2056
Mounting Bracket

145432056
X26000: RNCC: 3 | RNVC: 2

31 Aug 2004

5340-14-224-8859
Bumper

142248859
GSM1674A8: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-555-7862
Access Cover

145557862
0177550520: RNCC: 3 | RNVC: 2

14 Dec 2007

5340-14-489-3212
Access Cover

144893212
10384022: RNCC: 3 | RNVC: 2
F300 0T 023 2113: RNCC: 6 | RNVC: 9

9 Jul 1997

5340-14-523-6470
Mounting Plate

145236470
E134531: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-508-0414
Loop Clamp

145080414
LN422PA: RNCC: 3 | RNVC: 2
8920900019: RNCC: 5 | RNVC: 9

26 Aug 1998

5340-14-300-4343
Butt Hinge

143004343
1001-30X19ACIER: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-309-8492
Bow Handle

143098492
18116320: RNCC: 3 | RNVC: 2
18116320: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-556-1111
Crank Handle

145561111
19214754: RNCC: 3 | RNVC: 2
189810511: RNCC: 5 | RNVC: 2

31 Jan 2008

5340-14-411-6613
Anchor Strap

144116613
70595: RNCC: 3 | RNVC: 2
00042773: RNCC: 5 | RNVC: 2

27 Aug 1986

5340-14-354-1004
Angle Bracket

143541004
0120590037: RNCC: 3 | RNVC: 2
0120590037: RNCC: 5 | RNVC: 2

16 Jan 1979

5340-14-439-1934
Mounting Bracket

144391934
16006790: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-365-6005
Loop Clamp

143656005
82671: RNCC: 3 | RNVC: 2
82942: RNCC: 5 | RNVC: 2

19 Sep 1980

5340-14-458-1417
Mounting Bracket

144581417
45056090: RNCC: 3 | RNVC: 2
45056090: RNCC: 5 | RNVC: 9

8 Oct 1992

5340-14-308-6500
Access Cover

143086500
0236700020: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-532-1654
Loop Clamp

145321654
5003083089: RNCC: 3 | RNVC: 2

16 Oct 2002

5340-14-526-8322
Lock Key

145268322
5010492626: RNCC: 3 | RNVC: 2

7 Sep 2001

5340-14-465-0511
Mounting Plate

144650511
106481: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-533-8411
Mounting Bracket

145338411
46945600: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-547-6339
Webbing Strap

145476339
S7576902: RNCC: 3 | RNVC: 2

20 Oct 2005

5340-14-554-3525
Mounting Bracket

145543525
82185569000: RNCC: 3 | RNVC: 2

22 Jun 2007

5340-14-460-5554
Access Cover

144605554
405949: RNCC: 3 | RNVC: 2
405949: RNCC: 5 | RNVC: 9

29 Jan 1993

5340-14-523-4916
Cover Strip

145234916
01-250-397: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-14-546-3012
Bumper

145463012
10477255: RNCC: 3 | RNVC: 2

22 Jun 2005

5340-14-444-5087
Mounting Bracket

144445087
123010303: RNCC: 3 | RNVC: 9

14 Jan 1991

5340-14-405-3776
Retaining Strap

144053776
5172025200: RNCC: 3 | RNVC: 2
720252: RNCC: 5 | RNVC: 9

27 Nov 1985

5340-14-472-9675
Access Cover

144729675
38222976: RNCC: 3 | RNVC: 2
38222976: RNCC: 5 | RNVC: 9

23 Nov 1994

5340-14-545-6583
Mounting Bracket

145456583
10641844: RNCC: 3 | RNVC: 2

26 Apr 2005

5340-14-550-4994
Mounting Bracket

145504994
RA1B704534811N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-414-9594
Angle Bracket

144149594
230981: RNCC: 3 | RNVC: 2

26 Mar 1987

5340-14-373-1504
Retaining Band

143731504
0000729634: RNCC: 3 | RNVC: 2
0000729634: RNCC: 5 | RNVC: 9

21 Oct 1981

5340-14-551-2540
Angle Bracket

145512540
RA1B702502171N1: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-430-4566
Mounting Bracket

144304566
16379405: RNCC: 3 | RNVC: 2
16379405: RNCC: 5 | RNVC: 9
16379405: RNCC: 5 | RNVC: 9

22 Mar 1989

5340-14-292-8277
Bow Handle

142928277
7540080: RNCC: 3 | RNVC: 2
7540080: RNCC: 3 | RNVC: 9

1 Jan 1972

5340-14-555-3190
Mounting Bracket

145553190
82115309000: RNCC: 3 | RNVC: 2

24 Oct 2007

5340-14-476-9712
Cover Strip

144769712
RA1M295716411: RNCC: 3 | RNVC: 2

12 Jul 1995

5340-14-479-3494
Door Handle

144793494
AT100PD200311: RNCC: 3 | RNVC: 2
AT100PD200311: RNCC: 5 | RNVC: 9

10 Jan 1996

5340-14-511-6114
Pipe Hanger

145116114
RA1M112141530: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-456-9718
Plate Spacer

144569718
717139: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-14-209-8425
Support Hook

142098425
88221: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-526-5163
Compression Cup

145265163
D65898: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-549-4146
Loop Clamp

145494146
51181G: RNCC: 3 | RNVC: 2

30 Mar 2006

5340-14-536-0725
Mounting Bracket

145360725
803238130712: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-359-1211
Pipe Hanger

143591211
A11A522320230A1: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-454-6125
Access Cover

144546125
45603688: RNCC: 3 | RNVC: 2

8 Apr 1992

5340-14-512-5654
Utility Access Door

145125654
S8576723: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-315-3013
Access Cover

143153013
156365: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-396-1383
Runner

143961383
4770302660: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-509-1150
Bumper

145091150
038356: RNCC: 3 | RNVC: 2
10346030: RNCC: 5 | RNVC: 9

21 Oct 1998

5340-14-327-4199
Access Cover

143274199
401MA0416REP4: RNCC: 3 | RNVC: 2

8 Feb 2001

5340-14-502-7336
Access Cover

145027336
3E5153: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-312-1210
Retaining Strap

143121210
181052: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-306-2461
Metal Seal Ring

143062461
36582: RNCC: 3 | RNVC: 2
230242: RNCC: 5 | RNVC: 9
36582: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-507-6926
Access Cover

145076926
10420488: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-543-3222
Mounting Bracket

145433222
10623137: RNCC: 3 | RNVC: 2

20 Oct 2004

5340-14-462-2920
Bow Handle

144622920
14143: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-14-477-7926
Pipe Hanger

144777926
000381: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-14-464-3231
Mounting Bracket

144643231
5110703: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-521-3004
Utility Access Door

145213004
10484308: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-549-7026
Access Cover

145497026
61646667AA: RNCC: 3 | RNVC: 2

27 Apr 2006

5340-14-439-6292
Loop Clamp

144396292
511131050242: RNCC: 3 | RNVC: 2
55G24: RNCC: 5 | RNVC: 2

16 May 1990

5340-14-550-2957
Access Cover

145502957
MB6642F00: RNCC: 3 | RNVC: 2

15 Jun 2006

5340-14-520-2810
Mounting Bracket

145202810
CH01PD010007: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-450-6653
Hand Crank Arm

144506653
644440: RNCC: 3 | RNVC: 2

16 Oct 1991

5340-14-555-3192
Mounting Bracket

145553192
82115662000: RNCC: 3 | RNVC: 2

24 Oct 2007

5340-14-434-7191
Mounting Bracket

144347191
0BGA10-678223Y: RNCC: 3 | RNVC: 2
0678223Y00: RNCC: 5 | RNVC: 2

2 Oct 1989

5340-14-381-1485
Loop Clamp

143811485
BBZ2256: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-444-0893
Loop Clamp

144440893
320C63-324M: RNCC: 3 | RNVC: 2
320C63-324M: RNCC: 5 | RNVC: 9

18 Dec 1990

5340-14-548-0272
Bumper

145480272
10534485: RNCC: 3 | RNVC: 2

6 Dec 2005

5340-14-298-0631
Anchor Strap

142980631
046A002: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-370-5910
Angle Bracket

143705910
A11A234352051N1: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-351-5268
Bridge Clamp

143515268
A7274: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-398-7985
Retaining Bail

143987985
7701013564: RNCC: 3 | RNVC: 2
7701013564: RNCC: 5 | RNVC: 9

20 Feb 1985

5340-14-476-4348
Rod End Clevis

144764348
18937: RNCC: 3 | RNVC: 2

14 Jun 1995

5340-14-376-4804
Mending Plate

143764804
16787408: RNCC: 3 | RNVC: 2
16787408: RNCC: 5 | RNVC: 9
16787408: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-459-1579
Mounting Plate

144591579
16787740: RNCC: 3 | RNVC: 2

19 Nov 1992

5340-14-518-5971
Mounting Bracket

145185971
5010064005: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-525-7770
Mounting Bracket

145257770
C103475: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-457-4936
Loop Clamp

144574936
N7141071540: RNCC: 3 | RNVC: 2

9 Sep 1992

5340-14-414-7330
Loop Clamp

144147330
T3023BM5F6B: RNCC: 3 | RNVC: 2

26 Feb 1987

5340-14-547-7793
Mounting Bracket

145477793
5010639119: RNCC: 3 | RNVC: 2

12 Nov 2005

5340-14-488-6642
Mounting Plate

144886642
3BM01310AAAA: RNCC: 3 | RNVC: 2
3BM01310AAAA: RNCC: 5 | RNVC: 9

28 May 1997

5340-14-470-3428
Rim Lock

144703428
2141203: RNCC: 3 | RNVC: 2
21.41203: RNCC: 5 | RNVC: 2

15 Jun 1994

5340-14-505-6997
Mounting Bracket

145056997
327001D46566: RNCC: 3 | RNVC: 2
D46566: RNCC: 5 | RNVC: 2

26 Mar 1998

5340-14-542-7609
Utility Access Door

145427609
56697227: RNCC: 3 | RNVC: 2

13 Aug 2004

5340-14-551-5710
Angle Bracket

145515710
RA1B701626009: RNCC: 3 | RNVC: 2

5 Oct 2006

5340-14-510-9417
Mounting Plate

145109417
29486792: RNCC: 3 | RNVC: 2

24 Nov 1998

5340-14-537-9050
Mounting Bracket

145379050
10492063: RNCC: 3 | RNVC: 2

3 Dec 2003

5340-14-527-5269
Mounting Plate

145275269
MBEU161950: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-14-504-1530
Mounting Bracket

145041530
891ZZ97171: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-442-3205
Mounting Plate

144423205
A33506: RNCC: 3 | RNVC: 2

10 Oct 1990

5340-14-409-0758
Access Cover

144090758
4771621500: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-504-6810
Access Cover

145046810
50092560: RNCC: 3 | RNVC: 2

26 Feb 1998

5340-14-352-7713
Access Cover

143527713
240107: RNCC: 3 | RNVC: 2
240107: RNCC: 5 | RNVC: 2

14 Nov 1978

5340-14-382-2099
Anchor Strap

143822099
5516012878: RNCC: 3 | RNVC: 2
86012878: RNCC: 5 | RNVC: 2
5516012878: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-209-9370
Access Cover

142099370
Z12269: RNCC: 3 | RNVC: 2
Z12269: RNCC: 5 | RNVC: 9
SDMZ12269: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-325-6100
Access Cover

143256100
164176: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-311-9339
Access Cover

143119339
16293056: RNCC: 3 | RNVC: 2
16293056: RNCC: 5 | RNVC: 9
16293056: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-417-0869
Cushioning Pad

144170869
538984: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-14-500-7563
Loop Clamp

145007563
E64201366000: RNCC: 3 | RNVC: 2
F300 0T 024 7762: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-317-9745
Loop Clamp

143179745
51413105019: RNCC: 3 | RNVC: 2
28G19: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-518-9998
Access Cover

145189998
706978: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-506-8542
Access Cover

145068542
B48347: RNCC: 3 | RNVC: 2

27 May 1998

5340-14-522-3193
Lock-Release Lever

145223193
10466713: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-14-574-4210
Utility Access Door

145744210
1202003-700: RNCC: 3 | RNVC: 2

17 Jan 2013

5340-14-463-5755
Mounting Bracket

144635755
165904: RNCC: 3 | RNVC: 2
89170107: RNCC: 5 | RNVC: 2

17 Jun 1993

5340-14-339-3479
Retaining Strap

143393479
TH20A1246: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-418-9010
Rod End Clevis

144189010
DA1D775217001: RNCC: 3 | RNVC: 2

16 Sep 1987

5340-14-407-7407
Anchor Strap

144077407
542972: RNCC: 3 | RNVC: 2

27 Feb 1986

5340-14-382-9372
Rod End Clevis

143829372
27032: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-543-5833
Angle Bracket

145435833
T533A1121113: RNCC: 3 | RNVC: 2

24 Nov 2004

5340-14-504-9980
Angle Bracket

145049980
5010120508: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-310-7255
Access Cover

143107255
15440061: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-480-6300
Mounting Bracket

144806300
2022164: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-412-5269
Retaining Strap

144125269
225606: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-14-367-4271
Detent Plunger

143674271
15176878: RNCC: 3 | RNVC: 2
15176878: RNCC: 5 | RNVC: 2
15176878: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-536-9720
Spring Window Bolt

145369720
08.44889: RNCC: 3 | RNVC: 2
A004010: RNCC: 5 | RNVC: 2

24 Sep 2003

5340-14-369-0754
Catch Strike

143690754
6502835T: RNCC: 3 | RNVC: 2
6503575Z: RNCC: 5 | RNVC: 2

17 Apr 1981

5340-14-351-0396
Catch Strike

143510396
5000072799: RNCC: 3 | RNVC: 2
5000072799: RNCC: 5 | RNVC: 9

10 Aug 1978

5340-14-358-3539
Catch Strike

143583539
JVAT75: RNCC: 3 | RNVC: 2

13 Aug 1979

5340-14-428-2750
Spring Window Bolt

144282750
15A3550: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-350-4685
Catch Strike

143504685
210117: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-402-7128
Catch Strike

144027128
4CR122AP01: RNCC: 3 | RNVC: 2
LH93171ZB24X5IR: RNCC: 5 | RNVC: 9

19 Jul 1985

5340-14-416-6980
Catch Strike

144166980
533523: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-447-2266
Barrel Bolt

144472266
VB-80LAITON: RNCC: 3 | RNVC: 2

13 May 1991

5340-14-306-4082
Catch Strike

143064082
MAA7-65108: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-297-4203
Barrel Bolt

142974203
TR1-35LAIT0N: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-327-5673
Catch Strike

143275673
198120: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-302-5479
Spring Window Bolt

143025479
330A58-4260-05: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-388-8954
Spring Window Bolt

143888954
365A25-5000-00: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-515-0907
Catch Strike

145150907
311157: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-14-031-8562
Catch Strike

140318562
M375-117209: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-455-3668
Catch Strike

144553668
5000809373: RNCC: 3 | RNVC: 2

21 May 1992

5340-14-329-0473
Catch Strike

143290473
AC.157-ZB: RNCC: 3 | RNVC: 2
AC157ZB: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-245-1454
Catch Strike

142451454
321A23-9761-20: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-359-6853
Catch Strike

143596853
198034: RNCC: 3 | RNVC: 2

15 Oct 1979

5340-14-414-3931
Catch Strike

144143931
DA1D230319637U1: RNCC: 3 | RNVC: 2

28 Jan 1987

5340-14-547-2413
Catch Strike

145472413
AC.178-IS: RNCC: 3 | RNVC: 2

6 Oct 2005

5340-14-212-1770
Spring Window Bolt

142121770
LA95072: RNCC: 3 | RNVC: 9

5 Jul 1980

5340-14-465-1442
Catch Strike

144651442
365A21-3810-20: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-502-0397
Access Cover

145020397
103089001201: RNCC: 3 | RNVC: 2
103089001201: RNCC: 5 | RNVC: 2

26 Nov 1997

5340-14-385-2274
Anchor Strap

143852274
233956: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-508-4541
Access Cover

145084541
11170: RNCC: 3 | RNVC: 2

9 Sep 1998

5340-14-468-0042
Rim Lock

144680042
5315/6865 OPPOSE CADRE DROITE: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-14-530-5208
Access Cover

145305208
79092194: RNCC: 3 | RNVC: 2

18 Jun 2002

5340-14-540-1661
Access Cover

145401661
F1264529: RNCC: 3 | RNVC: 2

11 Mar 2004

5340-14-352-7720
Rod End Clevis

143527720
240119: RNCC: 3 | RNVC: 2
240119: RNCC: 5 | RNVC: 2

14 Nov 1978

5340-14-357-9287
Retaining Strap

143579287
217241: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-14-309-5451
Angle Bracket

143095451
70691208: RNCC: 3 | RNVC: 2
70691208: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-440-9586
Webbing Strap

144409586
F135215: RNCC: 3 | RNVC: 2

8 Aug 1990

5340-14-043-1501
Extension Shaft

140431501
065U20-719862M: RNCC: 3 | RNVC: 2

10 Apr 1984

5340-14-544-4065
Mounting Bracket

145444065
5001864802: RNCC: 3 | RNVC: 2

27 Jan 2005

5340-14-260-3802
Anchor Strap

142603802
70885076: RNCC: 3 | RNVC: 2
70885076: RNCC: 5 | RNVC: 9
885076: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-359-7257
Access Cover

143597257
BAZ3113: RNCC: 3 | RNVC: 2

15 Oct 1979

5340-14-548-8237
Access Cover

145488237
0390130460: RNCC: 3 | RNVC: 2

15 Feb 2006

5340-14-542-7720
Utility Access Door

145427720
8011793K00: RNCC: 3 | RNVC: 2

13 Aug 2004

5340-14-344-2134
Access Cover

143442134
ST406M52P167: RNCC: 3 | RNVC: 2

10 Aug 1977

5340-14-476-8351
Mounting Plate

144768351
711-932: RNCC: 3 | RNVC: 2

5 Jul 1995

5340-14-269-7748
Angle Bracket

142697748
104238: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-539-5549
Utility Access Door

145395549
SZ09.425.500D: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-553-6828
Mounting Plate

145536828
82071030000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-366-4611
Angle Bracket

143664611
BBZ2293: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-272-9658
Loop Clamp

142729658
A68402: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-259-5719
Mending Plate

142595719
9137747: RNCC: 3 | RNVC: 2
9137747: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-502-6702
Mounting Bracket

145026702
294005: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-523-2518
Pipe Hanger

145232518
RA1M701946371: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-544-0639
Mounting Plate

145440639
AMPC ENER E227322: RNCC: 3 | RNVC: 2

25 Dec 2004

5340-14-549-1153
Angle Bracket

145491153
RA1M705345111A1N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-399-4946
Retaining Strap

143994946
15150493: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-548-8199
Mounting Plate

145488199
0390100870: RNCC: 3 | RNVC: 2

15 Feb 2006

5340-14-542-3005
Mounting Bracket

145423005
972546508: RNCC: 3 | RNVC: 2
972546508: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-548-6380
Angle Bracket

145486380
RA1M702506055A1: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-533-3074
Rigid Caster

145333074
179M3302: RNCC: 3 | RNVC: 2
CAE01461: RNCC: 5 | RNVC: 2

29 Jan 2003

5340-14-284-2555
Access Cover

142842555
78571-1: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-484-6636
Pipe Hanger

144846636
29405327: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-321-0099
Access Cover

143210099
15437910: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-537-1188
Mounting Bracket

145371188
1003419: RNCC: 3 | RNVC: 2

1 Oct 2003

5340-14-513-0561
Webbing Strap

145130561
009577035P: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-14-381-2708
Anchor Strap

143812708
155GCT061317: RNCC: 3 | RNVC: 2
BAZ6490: RNCC: 5 | RNVC: 2
061317: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-517-2120
Loop Clamp

145172120
51310602013: RNCC: 3 | RNVC: 2
9562811280: RNCC: 5 | RNVC: 2
21F13: RNCC: 5 | RNVC: 9

17 Nov 1999

5340-14-507-9289
Access Cover

145079289
214005010: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-393-0008
Anchor Strap

143930008
5000708313: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-14-482-6183
Access Cover

144826183
39374231: RNCC: 3 | RNVC: 2

18 Jul 1996

5340-14-470-1945
Access Cover

144701945
500176: RNCC: 3 | RNVC: 2

8 Jun 1994

5340-14-384-6602
Access Cover

143846602
16960250: RNCC: 3 | RNVC: 2
16960250: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-467-4083
Access Cover

144674083
1039248F00: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-14-501-1020
Mounting Bracket

145011020
162210105: RNCC: 3 | RNVC: 2
F300 0T 025 1408: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-542-7588
Access Cover

145427588
61018936AA: RNCC: 3 | RNVC: 2

12 Aug 2004

5340-14-436-6280
Mounting Plate

144366280
DA2C202243440: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-517-2637
Access Cover

145172637
39066023: RNCC: 3 | RNVC: 2

24 Nov 1999

5340-14-303-4586
Retaining Band

143034586
GC6705: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-528-3112
Access Cover

145283112
45270328: RNCC: 3 | RNVC: 2

21 Jan 2002

5340-14-351-5700
Access Cover

143515700
110060: RNCC: 3 | RNVC: 2
BFCSAMM110060: RNCC: 5 | RNVC: 2

12 Sep 1978

5340-14-529-4159
Access Cover

145294159
10591149: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-300-5497
Access Cover

143005497
1348: RNCC: 3 | RNVC: 9
1348: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-505-7477
Access Cover

145057477
39256573: RNCC: 3 | RNVC: 2
39256573: RNCC: 3 | RNVC: 9

26 Mar 1998

5340-14-335-4818
Bow Handle

143354818
6635: RNCC: 3 | RNVC: 2
CR1674: RNCC: 5 | RNVC: 9

30 Jun 1976

Load More Results