What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 17 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 17 of 446

5340-14-476-5927
Rigid Caster

144765927
286611: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-14-433-4881
Mounting Bracket

144334881
022495E: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-266-2614
Snap Hook

142662614
TDCCM1BIS166: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-550-4992
Mounting Bracket

145504992
RA1A701266031A1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-547-5499
Angle Bracket

145475499
RA1M706515211N1: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-435-4726
Rod End Clevis

144354726
DA2C171201002: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-395-9246
Access Cover

143959246
413058: RNCC: 3 | RNVC: 2
413058: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-434-5270
Access Cover

144345270
BB4387: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-555-0938
Mounting Bracket

145550938
82156727000: RNCC: 3 | RNVC: 2

27 Sep 2007

5340-14-438-7558
Rope Cleat

144387558
TB1030401: RNCC: 3 | RNVC: 2

4 Apr 1990

5340-14-323-0796
Angle Bracket

143230796
M058683: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-545-4249
Cover Strip

145454249
RA1B701960541: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-548-1596
Angle Bracket

145481596
5430123461: RNCC: 3 | RNVC: 2

13 Dec 2005

5340-14-446-5003
Mounting Plate

144465003
81452391: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-14-402-0432
Retaining Strap

144020432
219852: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-489-5388
Blank Panel

144895388
29689339: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-14-382-3934
Retaining Strap

143823934
BAZ7436: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-441-7318
Mounting Bracket

144417318
234501331200: RNCC: 3 | RNVC: 2
23451150: RNCC: 5 | RNVC: 2

17 Sep 1990

5340-14-325-2095
Rod End Clevis

143252095
522055A: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-445-8374
Mounting Bracket

144458374
57157: RNCC: 3 | RNVC: 2

27 Feb 1991

5340-14-546-7411
Mounting Bracket

145467411
S258A4012102: RNCC: 3 | RNVC: 2

10 Aug 2005

5340-14-322-9105
Access Cover

143229105
0000567637: RNCC: 3 | RNVC: 2
0000567637: RNCC: 5 | RNVC: 9
567637: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-295-0954
Rod End Clevis

142950954
273117: RNCC: 3 | RNVC: 2
273117: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-354-0024
Angle Bracket

143540024
A11A232016001: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-384-7237
Access Cover

143847237
16761422: RNCC: 3 | RNVC: 2
16761422: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-206-9163
Loop Clamp

142069163
511131050111: RNCC: 3 | RNVC: 2
35G11: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-448-0704
Butt Hinge

144480704
PM1A711024511: RNCC: 3 | RNVC: 2
PM1A711024511: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-403-4671
Access Cover

144034671
22384743: RNCC: 3 | RNVC: 2
22384743: RNCC: 5 | RNVC: 9

21 Aug 1985

5340-14-532-3598
Angle Bracket

145323598
RA1M216711321: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-477-2469
Rod End Clevis

144772469
RA1M210153430: RNCC: 3 | RNVC: 2

2 Aug 1995

5340-14-540-7487
Access Cover

145407487
38051741: RNCC: 3 | RNVC: 2
ND078516: RNCC: 5 | RNVC: 2
4848ZG8613181423: RNCC: 6 | RNVC: 9

23 Apr 2004

5340-14-425-6034
Angle Bracket

144256034
13-212-30: RNCC: 3 | RNVC: 2

12 Jul 1988

5340-14-452-8448
Retaining Strap

144528448
225951: RNCC: 3 | RNVC: 2

22 Jan 1992

5340-14-446-6797
Butt Hinge

144466797
ST406M28P11E61: RNCC: 3 | RNVC: 2

9 Apr 1991

5340-14-222-9978
Access Cover

142229978
0330160: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-482-1010
Runner

144821010
22531045: RNCC: 3 | RNVC: 2
22531045: RNCC: 5 | RNVC: 9

20 Jun 1996

5340-14-518-0243
Bumper

145180243
5010213323: RNCC: 3 | RNVC: 2

21 Jan 2000

5340-14-550-6571
Access Cover

145506571
45284857: RNCC: 3 | RNVC: 2

6 Jul 2006

5340-14-511-8574
Clamping Catch

145118574
06120P003000: RNCC: 3 | RNVC: 2

27 Jan 1999

5340-14-461-9917
Rod End Clevis

144619917
038232N: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-392-7530
Retaining Strap

143927530
5000605432: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-386-5149
Bumper

143865149
032019: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-383-5388
Access Cover

143835388
20205045: RNCC: 3 | RNVC: 2
20205045: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-301-0528
Retaining Strap

143010528
1060510095: RNCC: 3 | RNVC: 2
1060510095: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-316-8532
Pipe Hanger

143168532
30095: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-546-1841
Angle Bracket

145461841
RA1B701436291: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-365-9042
Rod End Clevis

143659042
411754: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-437-8554
Plug Button

144378554
815404355: RNCC: 3 | RNVC: 2

21 Feb 1990

5340-14-466-9925
Access Cover

144669925
462068AD: RNCC: 3 | RNVC: 2

14 Dec 1993

5340-14-512-5623
Bow Handle

145125623
K5075264: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-528-1392
Angle Bracket

145281392
106896: RNCC: 3 | RNVC: 2

20 Dec 2001

5340-14-446-1429
Mounting Plate

144461429
39959479: RNCC: 3 | RNVC: 2
45611405: RNCC: 5 | RNVC: 2
39959479: RNCC: 5 | RNVC: 9

6 Mar 1991

5340-14-259-6439
Butt Hinge

142596439
BFC10027: RNCC: 3 | RNVC: 2
BY148A10027: RNCC: 3 | RNVC: 2
BFC20027: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-314-6354
Mounting Plate

143146354
0057200480: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-402-5809
Detent Plunger

144025809
401231: RNCC: 3 | RNVC: 2
BGE401231: RNCC: 5 | RNVC: 2

19 Jul 1985

5340-14-524-8631
Utility Access Door

145248631
46763178AA00: RNCC: 3 | RNVC: 9

25 Apr 2001

5340-14-513-6220
Bumper

145136220
47137152: RNCC: 3 | RNVC: 2

30 Mar 1999

5340-14-527-1775
Mounting Bracket

145271775
10512228: RNCC: 3 | RNVC: 2

10 Oct 2001

5340-14-528-8682
Bail Handle

145288682
GA024457Y00: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-14-551-2849
Mounting Bracket

145512849
RA1M701964161: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-421-7064
Detent Plunger

144217064
8812027304: RNCC: 3 | RNVC: 2

27 Jan 1988

5340-14-444-1037
Rim Lock Set

144441037
S3Z5959085702: RNCC: 3 | RNVC: 2

18 Dec 1990

5340-14-522-3179
Mounting Bracket

145223179
10459904: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-14-436-5826
Tubular Fairlead

144365826
DA2C206400420: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-440-1520
Mounting Bracket

144401520
LSA44B160: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-448-7904
Access Cover

144487904
39534088: RNCC: 3 | RNVC: 2
39534088: RNCC: 5 | RNVC: 9

10 Jul 1991

5340-14-551-6331
Mounting Bracket

145516331
10451018: RNCC: 3 | RNVC: 2

10 Oct 2006

5340-14-354-6424
Access Cover

143546424
2167-226C504: RNCC: 3 | RNVC: 2
2167-226C504: RNCC: 5 | RNVC: 9

31 Jan 1979

5340-14-430-3174
Access Cover

144303174
39151309: RNCC: 3 | RNVC: 2

15 Mar 1989

5340-14-395-9971
Anchor Strap

143959971
0000664849: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-408-6429
Rod End Clevis

144086429
160G202094: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-541-8483
Mounting Bracket

145418483
1149040114: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-443-0573
Cover Strip

144430573
PM1A227000026: RNCC: 3 | RNVC: 2
PM1A227000026: RNCC: 5 | RNVC: 2

7 Nov 1990

5340-14-547-4740
Mounting Bracket

145474740
S341A4002103: RNCC: 3 | RNVC: 2

14 Oct 2005

5340-14-533-1212
Snap Hook

145331212
79871: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-14-512-0030
Retaining Clip

145120030
644024: RNCC: 3 | RNVC: 2
644024: RNCC: 5 | RNVC: 2

2 Feb 1999

5340-14-311-3761
Flush Catch Claw

143113761
VTTRATACA200: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-266-2126
Angle Bracket

142662126
450650: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-504-2271
Mounting Bracket

145042271
3476252M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-483-7215
Angle Bracket

144837215
0064251530: RNCC: 3 | RNVC: 2

27 Sep 1996

5340-14-368-9057
Rod End Clevis

143689057
3SM0057: RNCC: 3 | RNVC: 2

10 Mar 1981

5340-14-554-3519
Mounting Bracket

145543519
82355519000: RNCC: 3 | RNVC: 2

22 Jun 2007

5340-14-334-4572
Mending Plate

143344572
184230: RNCC: 3 | RNVC: 2

1 Jun 1976

5340-14-386-0006
Webbing Strap

143860006
5000501146: RNCC: 3 | RNVC: 2
5000501146: RNCC: 5 | RNVC: 9

24 Aug 1983

5340-14-530-1216
Angle Bracket

145301216
TB3020108F440: RNCC: 3 | RNVC: 2

14 May 2002

5340-14-306-4319
Mounting Bracket

143064319
0249927580: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-527-2735
Mounting Plate

145272735
10248893: RNCC: 3 | RNVC: 2

17 Oct 2001

5340-14-410-7577
Loop Clamp

144107577
MS1200N: RNCC: 3 | RNVC: 2
MS1200N: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-449-7316
Mounting Bracket

144497316
45181826: RNCC: 3 | RNVC: 2
45181826: RNCC: 5 | RNVC: 9

4 Sep 1991

5340-14-357-1647
Angle Bracket

143571647
A11A231474571: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-528-5372
Mounting Bracket

145285372
5605625A: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-541-9202
Angle Bracket

145419202
211959: RNCC: 3 | RNVC: 2

2 Jul 2004

5340-14-482-0866
Dashpot

144820866
68859: RNCC: 3 | RNVC: 2

20 Jun 1996

5340-14-315-9633
Mounting Plate

143159633
EC7268FE10B: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-507-3984
Mounting Bracket

145073984
Z00.N5749287240: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-14-402-7327
Corner Brace

144027327
603775: RNCC: 3 | RNVC: 2

19 Jul 1985

5340-14-552-5746
Protection Bellows

145525746
77 03 073 200: RNCC: 3 | RNVC: 2
0035621: RNCC: 5 | RNVC: 2

17 Jan 2007

5340-14-522-9708
Mounting Plate

145229708
0319150220: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-14-278-4492
Bumper

142784492
E551RP: RNCC: 3 | RNVC: 2
146001000: RNCC: 5 | RNVC: 2
1556032: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-548-3848
Blank Panel

145483848
MB5690F00: RNCC: 3 | RNVC: 2

11 Jan 2006

5340-14-467-8000
Mounting Bracket

144678000
MD1135F00: RNCC: 3 | RNVC: 2

27 Jan 1994

5340-14-532-2845
Mounting Plate

145322845
48482: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-14-042-9123
Angle Bracket

140429123
A21B231474142: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-528-8711
Bail Handle

145288711
GC056388Y00: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-14-533-8431
Mounting Plate

145338431
56095447: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-316-3118
Loop Clamp

143163118
1143178: RNCC: 3 | RNVC: 2
1143178: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-497-6623
Mounting Plate

144976623
6K1329: RNCC: 3 | RNVC: 2
F300 0T 023 4669: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-533-8342
Mounting Bracket

145338342
56095464: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-444-9034
Support Hook

144449034
TB3050715: RNCC: 3 | RNVC: 2
70263: RNCC: 5 | RNVC: 9

28 Jan 1991

5340-14-504-6273
Lock Bolt

145046273
A09040101: RNCC: 3 | RNVC: 2
A09040101: RNCC: 5 | RNVC: 9

25 Feb 1998

5340-14-523-3477
Mounting Bracket

145233477
46028945: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-401-8510
Pipe Hanger

144018510
508DIAM32EXTREMITE: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-520-7289
Mounting Plate

145207289
46321228: RNCC: 3 | RNVC: 2
46321228: RNCC: 3 | RNVC: 9

6 Jun 2000

5340-14-488-3361
Mounting Bracket

144883361
25649901: RNCC: 3 | RNVC: 2
2-564990-1: RNCC: 5 | RNVC: 2

30 Apr 1997

5340-14-298-8628
Retaining Strap

142988628
178119: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-381-7891
Mounting Plate

143817891
16986745: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-536-7000
Loop Clamp

145367000
NSA5516C13ND: RNCC: 1 | RNVC: 2
55162513: RNCC: 3 | RNVC: 2

12 Sep 2003

5340-14-312-0060
Webbing Strap

143120060
TH20G1334-8: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-417-1147
Retaining Strap

144171147
BAZ5560: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-14-547-5204
Angle Bracket

145475204
RA1M703826161N1: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-517-5787
Mounting Plate

145175787
RA1M701201251: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-447-0661
Loop Clamp

144470661
2-151776-3: RNCC: 3 | RNVC: 2
2-151776-3: RNCC: 5 | RNVC: 9

25 Apr 1991

5340-14-339-1635
Retaining Strap

143391635
A0132007F15: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-259-9720
Loop Clamp

142599720
0249857100: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-500-9381
Mounting Bracket

145009381
B68503100000: RNCC: 3 | RNVC: 2
F300 0T 024 9593: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-524-3353
Retaining Band

145243353
1115996Q00: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-353-1289
Mending Plate

143531289
16448658: RNCC: 3 | RNVC: 2
16448658: RNCC: 3 | RNVC: 9

8 Dec 1978

5340-14-460-0843
Support Hook

144600843
PM1A711240050: RNCC: 3 | RNVC: 2
PM1A711240050: RNCC: 5 | RNVC: 2

7 Jan 1993

5340-14-406-4206
Loop Clamp

144064206
A24218: RNCC: 3 | RNVC: 2
A24218: RNCC: 5 | RNVC: 9

8 Jan 1986

5340-14-546-2654
Mounting Bracket

145462654
190101382-1: RNCC: 3 | RNVC: 2
190101382-1: RNCC: 5 | RNVC: 2

21 Jun 2005

5340-14-545-3751
Mounting Bracket

145453751
T720G3002803: RNCC: 3 | RNVC: 2

8 Apr 2005

5340-14-316-1669
Angle Bracket

143161669
458993: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-549-2746
Retaining Strap

145492746
P2283984: RNCC: 3 | RNVC: 2

17 Mar 2006

5340-14-455-0999
Handwheel

144550999
1746: RNCC: 3 | RNVC: 2
1746C: RNCC: 3 | RNVC: 2
1746A: RNCC: 5 | RNVC: 2
1746B: RNCC: 5 | RNVC: 2
FCAFL1746B: RNCC: 5 | RNVC: 2

1 May 1992

5340-14-412-4715
Rod End Clevis

144124715
N77218: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-14-454-4626
Expansion Plug

144544626
4162125: RNCC: 3 | RNVC: 2

2 Apr 1992

5340-14-431-2824
Quick Release Pin

144312824
620C10T30: RNCC: 3 | RNVC: 2

12 Apr 1989

5340-14-559-2979
Utility Resilient Mount

145592979
10622474: RNCC: 3 | RNVC: 2

17 Dec 2008

5340-14-525-2720
Bumper

145252720
10022468: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-513-5623
Mounting Bracket

145135623
DE21762: RNCC: 3 | RNVC: 2

24 Mar 1999

5340-14-272-7509
Angle Bracket

142727509
202126: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-405-2549
Angle Bracket

144052549
1240305: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-548-3256
Retaining Clip

145483256
708972: RNCC: 3 | RNVC: 2

8 Jan 2006

5340-14-359-5213
Runner

143595213
13759: RNCC: 3 | RNVC: 2

15 Oct 1979

5340-14-401-5975
Anchor Strap

144015975
S3819-1: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-358-3961
Clamp Bolt Assembly

143583961
387927: RNCC: 3 | RNVC: 2

13 Aug 1979

5340-14-521-3027
Mounting Bracket

145213027
10507004: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-456-9071
Blank Panel

144569071
30602302: RNCC: 3 | RNVC: 2
30602302: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-14-474-4512
Loop Clamp

144744512
51121905007: RNCC: 3 | RNVC: 2
24PE7: RNCC: 5 | RNVC: 2
25PE7: RNCC: 5 | RNVC: 2
51121919007: RNCC: 5 | RNVC: 2

15 Feb 1995

5340-14-413-0763
Clamping Catch

144130763
GE613114ZB: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-504-4181
Access Cover

145044181
GC21-2: RNCC: 3 | RNVC: 2

16 Feb 1998

5340-14-454-4784
Access Cover

144544784
70902J133177: RNCC: 3 | RNVC: 2
133177: RNCC: 5 | RNVC: 2
5044924: RNCC: 5 | RNVC: 9

2 Apr 1992

5340-14-348-6795
Mending Plate

143486795
226427: RNCC: 3 | RNVC: 2
226427: RNCC: 5 | RNVC: 9

19 Apr 1978

5340-14-548-6464
Cover Strip

145486464
PM1A511323083: RNCC: 3 | RNVC: 2
PM1A511323083: RNCC: 5 | RNVC: 2

27 Jan 2006

5340-14-540-4395
Bumper

145404395
F00133415: RNCC: 3 | RNVC: 2

25 Mar 2004

5340-14-278-4539
Mending Plate

142784539
12504794: RNCC: 3 | RNVC: 2
12504794: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-543-9973
Lock Bolt

145439973
4773103990: RNCC: 3 | RNVC: 9

21 Dec 2004

5340-14-542-7540
Loop Clamp

145427540
EN4114S05NH0: RNCC: 2 | RNVC: 2
51115305005: RNCC: 3 | RNVC: 2

10 Aug 2004

5340-14-530-1240
Mounting Plate

145301240
TB3050733: RNCC: 3 | RNVC: 2

14 May 2002

5340-14-444-3717
Mounting Bracket

144443717
FLAD12V30: RNCC: 3 | RNVC: 2

9 Jan 1991

5340-14-251-9471
Handwheel

142519471
32-224-11-07: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-459-1840
Mounting Bracket

144591840
100A107729A: RNCC: 3 | RNVC: 2
A107729A: RNCC: 5 | RNVC: 2
100A107729A: RNCC: 5 | RNVC: 9

19 Nov 1992

5340-14-536-2155
Mounting Bracket

145362155
RA1M216400131N1: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-14-550-4852
Pipe Hanger

145504852
RA1A702436191: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-444-1055
Mounting Bracket

144441055
P745162457: RNCC: 3 | RNVC: 2

18 Dec 1990

5340-14-552-4143
Mounting Plate

145524143
10622780001: RNCC: 3 | RNVC: 2

20 Dec 2006

5340-14-540-8062
Bumper

145408062
210962: RNCC: 3 | RNVC: 2

23 Apr 2004

5340-14-505-0311
Mounting Plate

145050311
018869W: RNCC: 3 | RNVC: 2
5000816890: RNCC: 5 | RNVC: 2
CHN018869W: RNCC: 5 | RNVC: 9

11 Mar 1998

5340-14-525-7498
Angle Bracket

145257498
04203624: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-231-6054
Retaining Band

142316054
1084S: RNCC: 3 | RNVC: 9
1465P: RNCC: 5 | RNVC: 9
1084: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-500-5481
Angle Bracket

145005481
4769710180: RNCC: 3 | RNVC: 2
F300 0T 024 5664: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-532-3500
Mounting Bracket

145323500
1330ETJ2000102: RNCC: 3 | RNVC: 2
1330ETJ2000102: RNCC: 3 | RNVC: 9
1330 ETJ 200 01 02: RNCC: 5 | RNVC: 9

30 Oct 2002

5340-14-472-6529
Utility Access Door

144726529
46050227: RNCC: 3 | RNVC: 2

9 Nov 1994

5340-14-532-1007
Mounting Bracket

145321007
1SH41767250: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-350-0139
Access Cover

143500139
0400-402: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-540-8970
Mounting Bracket

145408970
B001C190: RNCC: 3 | RNVC: 2

1 May 2004

5340-14-535-1826
Mounting Bracket

145351826
5000495468: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-442-1688
Loop Clamp

144421688
16589753: RNCC: 3 | RNVC: 2

3 Oct 1990

5340-14-325-9117
Key Blank

143259117
25511B7X8XC38: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-541-9421
Loop Clamp

145419421
501099005019A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-401-2511
Anchor Strap

144012511
613126: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-564-4229
Utility Resilient Mount

145644229
530903 51/55: RNCC: 3 | RNVC: 2
1OO2S0043A: RNCC: 5 | RNVC: 2

28 Apr 2010

5340-14-459-1491
Loop Clamp

144591491
20322721: RNCC: 3 | RNVC: 2
20322721: RNCC: 5 | RNVC: 9

19 Nov 1992

5340-14-472-1980
Bridge Clamp

144721980
DAV25188: RNCC: 3 | RNVC: 2

12 Oct 1994

5340-14-379-7446
Retaining Strap

143797446
909621503: RNCC: 3 | RNVC: 2
0121-117: RNCC: 5 | RNVC: 2
909621503: RNCC: 5 | RNVC: 2

20 Oct 1982

5340-14-319-7224
Access Cover

143197224
0172180410: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-530-0403
Loop Clamp

145300403
4325091: RNCC: 3 | RNVC: 2
4325091: RNCC: 5 | RNVC: 2

30 Apr 2002

5340-14-320-3618
Clamping Catch

143203618
GP30ZB: RNCC: 3 | RNVC: 1
26251046: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-541-5005
Loop Clamp

145415005
601630: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-507-6944
Mounting Bracket

145076944
10513925: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-388-1823
Access Cover

143881823
20E9114: RNCC: 3 | RNVC: 2
20E9114: RNCC: 5 | RNVC: 9

12 Oct 1983

5340-14-433-6169
Webbing Strap

144336169
39232933: RNCC: 3 | RNVC: 2
39232933: RNCC: 5 | RNVC: 9

2 Aug 1989

5340-14-386-0569
Access Cover

143860569
573906358: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-523-7042
Mounting Plate

145237042
Q2323221: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-224-4656
Retaining Strap

142244656
737948: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-466-0597
Mounting Bracket

144660597
D51252: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-14-518-5168
Mounting Plate

145185168
M005HM12102: RNCC: 3 | RNVC: 9

9 Feb 2000

5340-14-539-5026
Access Cover

145395026
MECZ8053: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-14-461-7277
Loop Clamp

144617277
325PA: RNCC: 3 | RNVC: 2
325PA: RNCC: 5 | RNVC: 2

24 Mar 1993

5340-14-482-1211
Bumper

144821211
1108544L00: RNCC: 3 | RNVC: 2

20 Jun 1996

5340-14-450-8810
Rod End Clevis

144508810
PM1A277130202: RNCC: 3 | RNVC: 2
PM1A277130202: RNCC: 5 | RNVC: 2

23 Oct 1991

5340-14-363-8312
Bumper

143638312
69F1615: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-547-5330
Angle Bracket

145475330
RA1M704746451: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-254-4930
Access Cover

142544930
12226: RNCC: 3 | RNVC: 2
12226: RNCC: 3 | RNVC: 9
0948437020: RNCC: 5 | RNVC: 2
FD2837: RNCC: 5 | RNVC: 2
0948437020: RNCC: 5 | RNVC: 9
948437020: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-392-8429
Retaining Strap

143928429
0034171164: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-525-1274
Mounting Plate

145251274
IF-250-170: RNCC: 3 | RNVC: 2
IF250-170: RNCC: 5 | RNVC: 9

22 May 2001

5340-14-467-1104
Access Hole Frame

144671104
163137: RNCC: 3 | RNVC: 2
89169983: RNCC: 5 | RNVC: 2

16 Dec 1993

5340-14-470-3492
Loop Clamp

144703492
HRL2B1TM16PP: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-512-3117
Loop Holder

145123117
30371397: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-14-551-2649
Cover Strip

145512649
RA1M721325723A1N1: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-551-9803
Mounting Bracket

145519803
82191136000: RNCC: 3 | RNVC: 2

15 Nov 2006

5340-14-457-3495
Webbing Strap

144573495
TB3060101: RNCC: 3 | RNVC: 2

27 Aug 1992

5340-14-496-5910
Angle Bracket

144965910
5000685778: RNCC: 3 | RNVC: 2
F300 0T 021 7576: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-031-0822
Retaining Clip

140310822
500: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-458-8688
Mounting Bracket

144588688
39072943: RNCC: 3 | RNVC: 2

5 Nov 1992

5340-14-503-6276
Mounting Plate

145036276
16507629: RNCC: 3 | RNVC: 2

21 Jan 1998

5340-14-277-7371
Retaining Band

142777371
9131314: RNCC: 3 | RNVC: 2
9131314: RNCC: 3 | RNVC: 9

1 Jan 1971

5340-14-540-9805
Webbing Strap

145409805
6501CCD130: RNCC: 3 | RNVC: 2
6501CCD130000: RNCC: 5 | RNVC: 2

5 May 2004

5340-14-515-3373
Mounting Bracket

145153373
3535701501: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-552-4147
Angle Bracket

145524147
82159660000: RNCC: 3 | RNVC: 2

20 Dec 2006

5340-14-555-3194
Mounting Bracket

145553194
82118218000: RNCC: 3 | RNVC: 2

24 Oct 2007

5340-14-509-2006
Mounting Bracket

145092006
MECZ6099: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-555-9905
Mounting Bracket

145559905
10517825: RNCC: 3 | RNVC: 2

17 Jan 2008

5340-14-466-7478
Mounting Bracket

144667478
8110103: RNCC: 3 | RNVC: 2
313157: RNCC: 5 | RNVC: 2

24 Nov 1993

5340-14-546-0467
Mounting Plate

145460467
82131628000: RNCC: 3 | RNVC: 2

8 Jun 2005

5340-14-468-0366
Mounting Plate

144680366
2M423561REP2: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-448-9763
Mounting Bracket

144489763
BAZ98233: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-14-526-1275
Mounting Plate

145261275
P106456: RNCC: 3 | RNVC: 2

4 Jul 2001

5340-14-530-6895
Mounting Plate

145306895
T533A1120227: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-523-7397
Mounting Plate

145237397
Z650209: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-433-4801
Rod End Clevis

144334801
071522W: RNCC: 3 | RNVC: 2

1 Aug 1989

5340-14-544-6419
Clip Retainer Plate

145446419
DE DEMI R0ND PLASTIQUE: RNCC: 3 | RNVC: 2

15 Feb 2005

5340-14-447-7734
Access Cover

144477734
39403029: RNCC: 3 | RNVC: 2

5 Jun 1991

5340-14-520-3584
Mounting Bracket

145203584
5130118: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-537-5317
Retaining Strap

145375317
29482471: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-540-7307
Mounting Bracket

145407307
38051291: RNCC: 3 | RNVC: 2
320880: RNCC: 5 | RNVC: 2
4848ZG8613181144: RNCC: 6 | RNVC: 9

22 Apr 2004

5340-14-488-4764
Access Cover

144884764
29658836: RNCC: 3 | RNVC: 2
29658836: RNCC: 3 | RNVC: 9

14 May 1997

5340-14-515-6010
Runner

145156010
E1902: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-287-1443
Retaining Strap

142871443
830709: RNCC: 3 | RNVC: 9
062830709: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-513-3575
Mounting Bracket

145133575
T5570960: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-14-531-2385
Angle Bracket

145312385
2190606: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-518-1512
Loop Clamp

145181512
5003083907: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-336-7821
Angle Bracket

143367821
15441588: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-520-4728
Utility Access Door

145204728
10472283: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-541-7921
Mounting Plate

145417921
E63101000055: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-361-1935
Rod End Clevis

143611935
BAZ6332: RNCC: 3 | RNVC: 2
BAZ6332: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-444-2446
Access Cover

144442446
589B220: RNCC: 3 | RNVC: 2

18 Dec 1990

5340-14-535-8541
Mounting Bracket

145358541
940685020: RNCC: 3 | RNVC: 2

25 Jun 2003

5340-14-540-7853
Access Cover

145407853
MMA01175: RNCC: 3 | RNVC: 2

23 Apr 2004

5340-14-515-2868
Access Cover

145152868
0420 5878: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-449-2014
Angle Bracket

144492014
DAV19181: RNCC: 3 | RNVC: 9

7 Aug 1991

5340-14-513-8928
Access Cover

145138928
328106: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-503-0317
Plug Button

145030317
202007A: RNCC: 3 | RNVC: 2

22 Dec 1997

5340-14-369-0809
Anchor Strap

143690809
215360: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-445-0521
Access Cover

144450521
532417: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-14-441-5772
Access Cover

144415772
321538: RNCC: 3 | RNVC: 2
321538: RNCC: 5 | RNVC: 9

4 Sep 1990

5340-14-419-2198
Loop Clamp

144192198
51310605021: RNCC: 3 | RNVC: 2
21F21: RNCC: 5 | RNVC: 2
9560151250: RNCC: 5 | RNVC: 2

16 Oct 1987

5340-14-403-9329
Runner

144039329
132044: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-446-1407
Mounting Plate

144461407
39959431: RNCC: 3 | RNVC: 2
39959434: RNCC: 5 | RNVC: 2
39959431: RNCC: 5 | RNVC: 9

6 Mar 1991

5340-14-408-4995
Angle Bracket

144084995
270131515: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-535-0641
Mounting Bracket

145350641
0202000046: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-14-525-7712
Rod End Clevis

145257712
A107930: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-553-6973
Mounting Bracket

145536973
47045605: RNCC: 3 | RNVC: 2

10 May 2007

5340-14-524-2073
Mounting Bracket

145242073
4201738E007: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-413-7009
Angle Bracket

144137009
412702020020: RNCC: 3 | RNVC: 2

15 Jan 1987

5340-14-463-3892
Webbing Strap

144633892
5001008097: RNCC: 3 | RNVC: 2
20008: RNCC: 3 | RNVC: 9

9 Jun 1993

5340-14-502-5264
Mounting Bracket

145025264
5000691557: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-449-6410
Webbing Strap

144496410
1207141G020: RNCC: 3 | RNVC: 2

28 Aug 1991

5340-14-254-8700
Mending Plate

142548700
711066: RNCC: 3 | RNVC: 9

1 Jan 1969

5340-14-497-4133
Mounting Bracket

144974133
1031070: RNCC: 3 | RNVC: 2
F300 0T 023 1429: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-480-6567
Protection Bellows

144806567
5010114003: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-424-6855
Access Cover

144246855
30829150G: RNCC: 3 | RNVC: 2

2 Jun 1988

5340-14-263-4441
Clamping Catch

142634441
M102454: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-542-4481
Loop Clamp

145424481
73428: RNCC: 3 | RNVC: 2
73428: RNCC: 5 | RNVC: 2

14 Jul 2004

5340-14-481-7376
Mounting Plate

144817376
39062746: RNCC: 3 | RNVC: 2

30 May 1996

5340-14-438-7360
Mending Plate

144387360
005056110041: RNCC: 3 | RNVC: 2
0049108: RNCC: 5 | RNVC: 2

3 Apr 1990

5340-14-552-3815
Mounting Bracket

145523815
2817AA: RNCC: 3 | RNVC: 2

18 Dec 2006

5340-14-524-3347
Retaining Strap

145243347
1076134Q00: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-516-9433
Mounting Bracket

145169433
1750-30: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-463-8573
Mounting Bracket

144638573
38654287: RNCC: 3 | RNVC: 2
38654287: RNCC: 5 | RNVC: 9

30 Jun 1993

5340-14-418-0308
Angle Bracket

144180308
093698V: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-505-6683
Mounting Bracket

145056683
D28001204000: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-460-0744
Plate Spacer

144600744
PM1A729009265A1: RNCC: 3 | RNVC: 2
PM1A729009265A1: RNCC: 5 | RNVC: 2

7 Jan 1993

5340-14-548-9390
Runner

145489390
L00714M: RNCC: 3 | RNVC: 2

24 Feb 2006

5340-14-312-0824
Webbing Strap

143120824
TH20G606: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-500-7105
Section Block Clamp

145007105
E64009998201: RNCC: 3 | RNVC: 2
F300 0T 024 7297: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-549-0774
Pipe Hanger

145490774
RA1M112141541N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-507-9807
Mounting Bracket

145079807
313522: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-465-0210
Synchro Clamp

144650210
MB1484F00: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-505-6405
Mounting Bracket

145056405
E25001000116: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-446-1096
Mounting Bracket

144461096
ST406M49P14: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-541-8432
Angle Bracket

145418432
F1263469: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-413-2485
Access Cover

144132485
3159890: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-550-9044
Angle Bracket

145509044
RA1A701772181N1: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-438-5986
Webbing Strap

144385986
TB1030910: RNCC: 3 | RNVC: 2

28 Mar 1990

5340-14-397-9553
Angle Bracket

143979553
005574035P: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-504-9978
Access Cover

145049978
0024385160: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-468-0815
Mounting Plate

144680815
LYN009055011101: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-543-6079
Mounting Bracket

145436079
SADDHP07: RNCC: 3 | RNVC: 2

24 Nov 2004

5340-14-300-0116
Rod End Clevis

143000116
160271: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-554-5892
Access Cover

145545892
0292950240: RNCC: 3 | RNVC: 2

23 Jul 2007

5340-14-461-7683
Butt Hinge

144617683
235042F: RNCC: 3 | RNVC: 2

24 Mar 1993

5340-14-506-5836
Bow Handle

145065836
NNP5340838309288: RNCC: 3 | RNVC: 9

29 Apr 1998

5340-14-514-3072
Access Cover

145143072
203Q990: RNCC: 3 | RNVC: 2
203Q990: RNCC: 5 | RNVC: 2

10 May 1999

5340-14-489-5438
Access Cover

144895438
46157961: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-14-370-5038
Loop Clamp

143705038
51213105060: RNCC: 3 | RNVC: 2
20G60: RNCC: 5 | RNVC: 2

18 May 1981

5340-14-527-3946
Mounting Plate

145273946
H145605: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-411-5530
Rod End Clevis

144115530
0A1099: RNCC: 3 | RNVC: 2

21 Aug 1986

5340-14-550-4682
Angle Bracket

145504682
RA1B701526309: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-444-7057
Bumper

144447057
39538926: RNCC: 3 | RNVC: 2
6126: RNCC: 5 | RNVC: 9
39538926: RNCC: 5 | RNVC: 9

16 Jan 1991

5340-14-555-3202
Mounting Bracket

145553202
82116150000: RNCC: 3 | RNVC: 2

24 Oct 2007

5340-14-450-6835
Rim Lock Set

144506835
JPM402: RNCC: 3 | RNVC: 2
0243969M00: RNCC: 5 | RNVC: 2
4028CYLINDRE60MM: RNCC: 5 | RNVC: 9

16 Oct 1991

5340-14-542-2388
Loop Clamp

145422388
738119023: RNCC: 3 | RNVC: 2
738119023: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-486-3635
Access Cover

144863635
261009: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-418-4901
Angle Bracket

144184901
44371: RNCC: 3 | RNVC: 2

26 Aug 1987

5340-14-336-7776
Retaining Strap

143367776
309756: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-409-0332
Bumper

144090332
232752: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-430-5732
Cover Strip

144305732
PM1A227000003: RNCC: 3 | RNVC: 2
PM1A227000003: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-553-1488
Mounting Bracket

145531488
0249720470: RNCC: 3 | RNVC: 2

6 Mar 2007

5340-14-524-4452
Utility Access Door

145244452
E5644632S00: RNCC: 3 | RNVC: 2
SYB2072: RNCC: 5 | RNVC: 2

20 Mar 2001

5340-14-332-9758
Access Cover

143329758
191735: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-338-9943
Plug Button

143389943
16388303: RNCC: 3 | RNVC: 2
16388303: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-504-1895
Bow Handle

145041895
1694494M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-416-6838
Access Cover

144166838
412804010101: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-554-3293
Mounting Bracket

145543293
82179722000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-394-1676
Mounting Plate

143941676
1885: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-513-8076
Mounting Bracket

145138076
DE21818: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-296-9450
Mending Plate

142969450
173531: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-272-8507
Angle Bracket

142728507
12504325: RNCC: 3 | RNVC: 2
12504325: RNCC: 3 | RNVC: 9

1 Jan 1971

5340-14-375-1674
Retaining Strap

143751674
0000555414: RNCC: 3 | RNVC: 2
555414: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-480-9161
Butt Hinge

144809161
ISO20NCAA11: RNCC: 3 | RNVC: 2
F0029650: RNCC: 5 | RNVC: 9

11 Apr 1996

5340-14-495-6882
Mounting Plate

144956882
LA01PD040105: RNCC: 3 | RNVC: 2
F300 0T 019 6448: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-478-0764
Support Hook

144780764
M418610A9224A01: RNCC: 3 | RNVC: 2

11 Oct 1995

5340-14-308-8166
Angle Bracket

143088166
000885007P: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-485-0496
Threaded Rod End

144850496
9501016010: RNCC: 3 | RNVC: 2
STD9501016010: RNCC: 5 | RNVC: 2

19 Dec 1996

5340-14-486-4839
Metal Grille

144864839
1027222G00: RNCC: 3 | RNVC: 2

21 Mar 1997

5340-14-466-2204
Runner

144662204
347126: RNCC: 3 | RNVC: 2
RAB2020: RNCC: 5 | RNVC: 2

2 Nov 1993

5340-14-241-6150
Loop Clamp

142416150
51413119008: RNCC: 3 | RNVC: 2
28G8: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-404-0042
T Plate

144040042
39225970: RNCC: 3 | RNVC: 2
39225970: RNCC: 5 | RNVC: 9

11 Sep 1985

5340-14-449-8479
Mounting Plate

144498479
382055C: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-14-471-9676
Access Cover

144719676
F00065477: RNCC: 3 | RNVC: 2
5000824631: RNCC: 5 | RNVC: 2
F00065477: RNCC: 5 | RNVC: 9

28 Sep 1994

5340-14-374-0347
Retaining Strap

143740347
BAZ96967: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-503-0330
Plug Button

145030330
5000448969: RNCC: 3 | RNVC: 2

22 Dec 1997

5340-14-483-1556
Clamping Catch

144831556
000C137: RNCC: 3 | RNVC: 2
000C137: RNCC: 5 | RNVC: 2

20 Aug 1996

5340-14-418-1487
Webbing Strap

144181487
120770: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-357-9636
Retaining Strap

143579636
08841100020: RNCC: 3 | RNVC: 2
88411: RNCC: 5 | RNVC: 2

20 Jul 1979

5340-14-257-7513
Retaining Strap

142577513
C955A11: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-261-0964
Rod End Connector

142610964
109106: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-533-8107
Mounting Bracket

145338107
8032440A00: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-286-5265
Access Cover

142865265
79028886: RNCC: 3 | RNVC: 2
79028886: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-550-0428
Mounting Bracket

145500428
61558445AA: RNCC: 3 | RNVC: 2

30 May 2006

5340-14-500-9191
Mounting Plate

145009191
E67200000012: RNCC: 3 | RNVC: 2
F300 0T 024 9400: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-520-3181
Mounting Bracket

145203181
3511 191 97131: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-520-7699
Synchro Clamp

145207699
T524A2001203: RNCC: 3 | RNVC: 2

14 Jun 2000

5340-14-236-6715
Slide Keeper

142366715
58031: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-370-0501
Access Cover

143700501
398102170004: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-512-9154
Access Cover

145129154
562399: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-551-6127
Access Cover

145516127
719082: RNCC: 3 | RNVC: 2

9 Oct 2006

5340-14-515-5182
Angle Bracket

145155182
9401946: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-465-6808
Mounting Plate

144656808
GM92005-1: RNCC: 3 | RNVC: 2
91711014: RNCC: 5 | RNVC: 2
GM92005-1: RNCC: 5 | RNVC: 2
GM92005-1: RNCC: 5 | RNVC: 9
GM92005-1: RNCC: 5 | RNVC: 9

6 Oct 1993

5340-14-574-9719
Utility Access Door

145749719
M2582802600000: RNCC: 3 | RNVC: 2

5 Mar 2013

5340-14-467-8538
Retaining Strap

144678538
166074: RNCC: 3 | RNVC: 2
89170176: RNCC: 5 | RNVC: 2

27 Jan 1994

5340-14-508-4511
Access Cover

145084511
953072: RNCC: 3 | RNVC: 2

9 Sep 1998

5340-14-478-8898
Loop Clamp

144788898
055U97-534254Q: RNCC: 3 | RNVC: 2
0534254Q00: RNCC: 5 | RNVC: 2

30 Nov 1995

5340-14-436-1296
Quick Release Pin

144361296
19116C7B30: RNCC: 3 | RNVC: 2

6 Dec 1989

5340-14-520-7721
Bumper

145207721
T524A2001319: RNCC: 3 | RNVC: 2

14 Jun 2000

5340-14-532-0573
Mounting Bracket

145320573
MCC20700: RNCC: 3 | RNVC: 2
MCC20700: RNCC: 5 | RNVC: 9

9 Oct 2002

5340-14-546-5830
Angle Bracket

145465830
RA1A705526011: RNCC: 3 | RNVC: 2

20 Jul 2005

5340-14-431-6049
Mounting Bracket

144316049
39454493: RNCC: 3 | RNVC: 2
39454493: RNCC: 5 | RNVC: 9

26 Apr 1989

5340-14-420-2129
Angle Bracket

144202129
413002020031: RNCC: 3 | RNVC: 2

25 Nov 1987

5340-14-520-1424
Mounting Bracket

145201424
45257462: RNCC: 3 | RNVC: 2

16 May 2000

5340-14-471-7843
Rod End Clevis

144717843
P02260: RNCC: 3 | RNVC: 2

14 Sep 1994

5340-14-409-0980
Access Cover

144090980
993391: RNCC: 3 | RNVC: 2
993391: RNCC: 5 | RNVC: 9

16 Apr 1986

5340-14-512-0350
Access Cover

145120350
0060233: RNCC: 3 | RNVC: 2

3 Feb 1999

5340-14-379-1483
Retaining Strap

143791483
C817190018: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-506-4787
Loop Clamp

145064787
NNP5340830228998: RNCC: 3 | RNVC: 9

29 Apr 1998

5340-14-543-3227
Mounting Bracket

145433227
10623140: RNCC: 3 | RNVC: 2

20 Oct 2004

5340-14-543-7474
Mounting Plate

145437474
880801045: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-14-440-2831
Angle Bracket

144402831
10270-240: RNCC: 3 | RNVC: 9
89408320: RNCC: 5 | RNVC: 2

11 Jul 1990

5340-14-527-2691
Access Cover

145272691
19204171: RNCC: 3 | RNVC: 2

17 Oct 2001

5340-14-504-0180
Webbing Strap

145040180
20753: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-14-454-0898
Access Cover

144540898
16508413: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-540-3108
Access Cover

145403108
10670674000: RNCC: 3 | RNVC: 2

18 Mar 2004

5340-14-322-2427
Pipe Hanger

143222427
0264307790: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-413-1709
Angle Bracket

144131709
121206: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-504-2335
Access Cover

145042335
3478317M91: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-577-1183
Utility Resilient Mount

145771183
12.2140.0104: RNCC: 3 | RNVC: 2

8 Aug 2013

5340-14-261-0960
Rod End Clevis

142610960
109305: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-444-7299
Rod End Clevis

144447299
0009031553: RNCC: 3 | RNVC: 2

21 Jan 1991

5340-14-237-5243
Access Cover

142375243
70808415: RNCC: 3 | RNVC: 2
70808415: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-394-6399
Mounting Plate

143946399
79099475: RNCC: 3 | RNVC: 2
79099475: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-490-4357
Loop Clamp

144904357
001B379: RNCC: 3 | RNVC: 2

29 Sep 1997

5340-14-487-6594
Access Cover

144876594
29364945: RNCC: 3 | RNVC: 2
29364945: RNCC: 3 | RNVC: 9

18 Apr 1997

5340-14-522-6007
Mounting Plate

145226007
3617A001: RNCC: 3 | RNVC: 2

8 Nov 2000

5340-14-514-0522
Section Block Clamp

145140522
RA1M703754125: RNCC: 3 | RNVC: 2

22 Apr 1999

5340-14-405-3360
Anchor Strap

144053360
006112031P: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-392-8990
Angle Bracket

143928990
4770316440: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-547-7270
Runner

145477270
8046409E00: RNCC: 3 | RNVC: 2

7 Nov 2005

5340-14-361-2214
Anchor Strap

143612214
5000498475: RNCC: 3 | RNVC: 2
5000498475: RNCC: 5 | RNVC: 9

24 Jan 1980

5340-14-411-4227
Wiring Harness

144114227
A11A742242060: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-518-5592
Angle Bracket

145185592
5000744161: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-421-3826
Bumper

144213826
96125098: RNCC: 3 | RNVC: 2

14 Jan 1988

5340-14-439-3067
Loop Clamp

144393067
51320602008: RNCC: 3 | RNVC: 2
21FE8: RNCC: 5 | RNVC: 2

25 Apr 1990

5340-14-437-9812
Mounting Plate

144379812
007463080P: RNCC: 3 | RNVC: 2

5 Mar 1990

5340-14-543-3619
Utility Access Door

145433619
212892: RNCC: 3 | RNVC: 2

22 Oct 2004

5340-14-554-3324
Mounting Bracket

145543324
82118334000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-503-0769
Access Cover

145030769
46246829: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-495-7635
Runner

144957635
304018037010A: RNCC: 3 | RNVC: 9
F300 0T 020 0440: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-486-3510
Loop Clamp

144863510
100369-32H: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-457-1984
Access Cover

144571984
1201300: RNCC: 3 | RNVC: 2

13 Aug 1992

5340-14-497-9066
Spring Holder

144979066
0044840060: RNCC: 3 | RNVC: 2

22 Oct 1997

5340-14-366-4623
Access Cover

143664623
BBZ0606: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-479-7843
Access Cover

144797843
0847140G01: RNCC: 3 | RNVC: 2

7 Feb 1996

5340-14-522-3205
Lock-Release Lever

145223205
10469813: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-14-382-3980
Access Door Hinge

143823980
BFP00512: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-301-0451
Mending Plate

143010451
0210576009: RNCC: 3 | RNVC: 2
0210576009: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-543-7445
Mounting Plate

145437445
32110158: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-14-274-7419
Compression Cup

142747419
79: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-436-5797
Cover Strip

144365797
DA2C293612013: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-500-6072
Runner

145006072
9350258380: RNCC: 3 | RNVC: 2
F300 0T 024 6256: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-517-8659
Mounting Bracket

145178659
92 020 02 0301: RNCC: 3 | RNVC: 2

14 Jan 2000

5340-14-400-0938
Angle Bracket

144000938
217730: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-518-9410
Retaining Band

145189410
23395-30: RNCC: 3 | RNVC: 2

29 Feb 2000

5340-14-525-5973
Mounting Bracket

145255973
10 146 400 1110: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-270-8634
Retaining Strap

142708634
H90Z2526: RNCC: 3 | RNVC: 2
530896: RNCC: 5 | RNVC: 2

4 May 1983

5340-14-488-6790
Mounting Bracket

144886790
38660973: RNCC: 3 | RNVC: 2
38660973: RNCC: 5 | RNVC: 9

28 May 1997

5340-14-504-4949
Flush Lock

145044949
TR97667: RNCC: 3 | RNVC: 2

18 Feb 1998

5340-14-545-1033
Handle Grip

145451033
T322G1003137: RNCC: 3 | RNVC: 2

17 Mar 2005

5340-14-459-2004
Mounting Plate

144592004
100A102708: RNCC: 3 | RNVC: 2

19 Nov 1992

5340-14-549-8736
Access Cover

145498736
2093200: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-463-0255
Access Cover

144630255
77500838: RNCC: 3 | RNVC: 2

12 May 1993

5340-14-385-9691
Access Cover

143859691
091461P: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-436-9600
Runner

144369600
16037368: RNCC: 3 | RNVC: 2
16037368: RNCC: 5 | RNVC: 9

10 Jan 1990

5340-14-511-7308
Locking Stay

145117308
8008911Q00: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-14-480-3807
Access Cover

144803807
34 59 60: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-303-3234
Rod End Clevis

143033234
R12608B6AET: RNCC: 2 | RNVC: 2
E74500006: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-489-6391
Mounting Bracket

144896391
332A58-2054-20: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-308-4272
Access Cover

143084272
P605: RNCC: 3 | RNVC: 2
DLT030201: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-406-0396
Rod End Clevis

144060396
M4Z5180908221: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-391-9068
Control Rod

143919068
5101-01-03-23: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-412-5265
Retaining Strap

144125265
199874: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-14-266-0928
Access Hole Frame

142660928
20495A: RNCC: 3 | RNVC: 2
50703F45: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-548-6920
Loop Clamp

145486920
SP01005516A: RNCC: 3 | RNVC: 2

1 Feb 2006

5340-14-522-3152
Mounting Plate

145223152
10371457: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-14-439-1092
Access Cover

144391092
0226220120: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-382-4242
Access Cover

143824242
400714: RNCC: 3 | RNVC: 2
BGE400714: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-539-7528
Cover Strip

145397528
SZ09.251.147: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-14-512-8903
Access Cover

145128903
550630: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-270-6080
Rod End Clevis

142706080
DLT071737: RNCC: 3 | RNVC: 2
DLT071737: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-500-5556
Mounting Plate

145005556
E63702000006: RNCC: 3 | RNVC: 2
F300 0T 024 5740: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-354-7506
Retaining Band

143547506
140528: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-475-9091
Loop Clamp

144759091
51313104008: RNCC: 3 | RNVC: 2
21G8TROU6-5: RNCC: 5 | RNVC: 2
HB21G8TROU6-5: RNCC: 5 | RNVC: 2
434139: RNCC: 5 | RNVC: 9

10 May 1995

5340-14-418-4674
Access Cover

144184674
4-454822: RNCC: 3 | RNVC: 9
4-454822: RNCC: 5 | RNVC: 2
4-454822: RNCC: 5 | RNVC: 9

26 Aug 1987

5340-14-463-1959
Access Cover

144631959
73148: RNCC: 3 | RNVC: 2
113559: RNCC: 5 | RNVC: 2

26 May 1993

5340-14-379-7619
Mending Plate

143797619
BAZ2859: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-488-4289
Handwheel

144884289
NNP5340878751409: RNCC: 3 | RNVC: 2

7 May 1997

5340-14-444-8306
Rod End Clevis

144448306
123621252: RNCC: 3 | RNVC: 9

23 Jan 1991

5340-14-550-0589
Mounting Bracket

145500589
20033: RNCC: 3 | RNVC: 2

31 May 2006

5340-14-306-7565
Access Cover

143067565
401MA414-A-F9-5: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-520-6194
Mending Plate

145206194
PR47697-3: RNCC: 3 | RNVC: 2

24 May 2000

5340-14-395-9592
Loop Clamp

143959592
51213110064: RNCC: 3 | RNVC: 2
300G64: RNCC: 5 | RNVC: 2
5000603498: RNCC: 5 | RNVC: 2

27 Nov 1984

5340-14-281-2194
Loop Clamp

142812194
9145614: RNCC: 3 | RNVC: 2
9145614: RNCC: 5 | RNVC: 2
TID7400: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-549-6272
Mounting Bracket

145496272
33011219-8: RNCC: 3 | RNVC: 2

24 Apr 2006

5340-14-347-4113
Loop Clamp

143474113
2050600650: RNCC: 3 | RNVC: 2
205F6-5: RNCC: 5 | RNVC: 2

1 Mar 1978

5340-14-397-1244
Mending Plate

143971244
20320978: RNCC: 3 | RNVC: 2
20320978: RNCC: 5 | RNVC: 9

1 Dec 1984

5340-14-310-8103
Mending Plate

143108103
0260602390: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-367-4272
Detent Plunger

143674272
15176879: RNCC: 3 | RNVC: 2
15176879: RNCC: 5 | RNVC: 2
15176879: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-529-8908
Mounting Bracket

145298908
10609619: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-414-2083
Retaining Strap

144142083
970415: RNCC: 3 | RNVC: 2
970415: RNCC: 5 | RNVC: 9

22 Jan 1987

5340-14-459-6103
Mounting Plate

144596103
16741092: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-401-2745
Eye Hook

144012745
2269004: RNCC: 3 | RNVC: 2
2269004: RNCC: 5 | RNVC: 2

5 Jun 1985

5340-14-399-7103
Tubular Fairlead

143997103
253992: RNCC: 3 | RNVC: 2
253992: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-516-3255
Lock Bolt

145163255
1SH41598404: RNCC: 3 | RNVC: 2

21 Sep 1999

5340-14-457-8841
Tee Hinge

144578841
02864615D4A: RNCC: 3 | RNVC: 2

24 Sep 1992

5340-14-549-6617
Mounting Bracket

145496617
2237839200: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-14-381-9473
Synchro Clamp

143819473
143754: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-508-0003
Mounting Plate

145080003
4773120550: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-463-5971
Mounting Plate

144635971
22332980-9: RNCC: 3 | RNVC: 2

21 Jun 1993

5340-14-463-3972
Mounting Plate

144633972
96100.A2.033: RNCC: 3 | RNVC: 2
89295642: RNCC: 5 | RNVC: 2

9 Jun 1993

5340-14-541-1400
Bridge Clamp

145411400
3823A044: RNCC: 3 | RNVC: 2
3823A044: RNCC: 3 | RNVC: 2

14 May 2004

5340-14-524-8155
Tee Hinge

145248155
1078522G00: RNCC: 3 | RNVC: 2

18 Apr 2001

5340-14-501-0209
Mounting Bracket

145010209
45833303: RNCC: 3 | RNVC: 9
F300 0T 025 0506: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-263-3887
Synchro Clamp

142633887
R111621: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-386-9187
Casement Fastener

143869187
5340CJVERR0UD0UILLEP0IGNED18X500: RNCC: 2 | RNVC: 2

24 Aug 1983

5340-14-533-2926
Mounting Plate

145332926
12-300-350: RNCC: 3 | RNVC: 2
SZ12.300.350: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-496-3668
Mounting Plate

144963668
182181: RNCC: 3 | RNVC: 2
F300 0T 021 4525: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-545-8052
Mounting Bracket

145458052
10631347: RNCC: 3 | RNVC: 2

16 May 2005

5340-14-544-1965
Angle Bracket

145441965
61078800AA: RNCC: 3 | RNVC: 2

10 Jan 2005

5340-14-505-3868
Angle Bracket

145053868
1024200401: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-353-5802
Belt-Strap Keeper

143535802
0011052201: RNCC: 3 | RNVC: 2
0011052201: RNCC: 5 | RNVC: 9

16 Jan 1979

5340-14-451-7520
Loop Clamp

144517520
A88824: RNCC: 3 | RNVC: 2

4 Dec 1991

5340-14-507-7756
Mounting Bracket

145077756
29486504: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-362-1731
Quick Release Pin

143621731
GA46228: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-454-4837
Mounting Bracket

144544837
145691: RNCC: 3 | RNVC: 2
70902J145691: RNCC: 3 | RNVC: 2
5044946: RNCC: 5 | RNVC: 9

2 Apr 1992

5340-14-514-9085
Mounting Plate

145149085
230017: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-14-505-5091
Loop Clamp

145055091
1110692000: RNCC: 3 | RNVC: 2
111FE20: RNCC: 5 | RNVC: 2

18 Mar 1998

5340-14-475-5805
Butt Hinge

144755805
1939-U12: RNCC: 3 | RNVC: 2

19 Apr 1995

5340-14-283-0424
Bumper

142830424
2-05840: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-362-0128
Bow Handle

143620128
23075647-3: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-362-0122
Surface Bolt

143620122
23073843-3: RNCC: 3 | RNVC: 2

20 Feb 1980

Load More Results