What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 16 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 16 of 446

5340-14-349-2762
Mending Plate

143492762
NO PRIMARY REF14-349-2762: RNCC: 3 | RNVC: 2
106005-01: RNCC: 5 | RNVC: 9

22 May 1978

5340-14-372-6164
Flush Lock

143726164
533-1A: RNCC: 3 | RNVC: 2
0022531006: RNCC: 5 | RNVC: 2
0022531006: RNCC: 5 | RNVC: 9

21 Sep 1981

5340-14-303-1943
Loop Clamp

143031943
A10-50-204-01-0: RNCC: 3 | RNVC: 2
A10-50-204-01-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-365-9982
Loop Clamp

143659982
501-804-599-0: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-305-4386
Loop Clamp

143054386
502-551-112-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-525-5271
Angle Bracket

145255271
61060300AA: RNCC: 3 | RNVC: 2

8 Jun 2001

5340-14-499-3895
Strap Fastener Loop

144993895
202420308560: RNCC: 3 | RNVC: 2
F300 0T 021 9444: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-532-6665
Mounting Bracket

145326665
607959: RNCC: 3 | RNVC: 2
C-1-610197B: RNCC: 5 | RNVC: 2

27 Nov 2002

5340-14-275-1777
Mending Plate

142751777
5001: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-486-2006
Anchor Strap

144862006
64766-9: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-462-7359
Flush Catch Claw

144627359
PM1A713511122: RNCC: 3 | RNVC: 2
PM1A713511122: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-418-5045
Anchor Strap

144185045
301197-0: RNCC: 3 | RNVC: 2

26 Aug 1987

5340-14-431-2826
Quick Release Pin

144312826
620C12T89: RNCC: 3 | RNVC: 2

12 Apr 1989

5340-14-418-3238
Angle Bracket

144183238
5-454417: RNCC: 3 | RNVC: 9
5-454417: RNCC: 5 | RNVC: 2
5-454417: RNCC: 5 | RNVC: 9

12 Aug 1987

5340-14-515-6327
Access Cover

145156327
5Q6537: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-408-5283
Mounting Plate

144085283
23108761-1: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-535-7597
Flush Catch Claw

145357597
T945A2001232: RNCC: 3 | RNVC: 2

25 Jun 2003

5340-14-434-1060
Eye Hook

144341060
071474M: RNCC: 3 | RNVC: 2

6 Sep 1989

5340-14-438-1502
Mounting Bracket

144381502
330A31-1603-05: RNCC: 3 | RNVC: 2

7 Mar 1990

5340-14-498-3158
Loop Clamp

144983158
91952646: RNCC: 3 | RNVC: 2
PAA73-10-010-04: RNCC: 3 | RNVC: 2
F300 0T 004 7823: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-529-1968
Angle Bracket

145291968
457-10040-000: RNCC: 3 | RNVC: 2

15 Mar 2002

5340-14-500-8172
Section Block Clamp

145008172
E64009998054: RNCC: 3 | RNVC: 2
F300 0T 024 8374: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-495-3080
Webbing Strap

144953080
117E248-00: RNCC: 3 | RNVC: 2
117E248-00: RNCC: 5 | RNVC: 9
F300 0T 018 9989: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-407-2850
Access Cover

144072850
121-874-33-51-02: RNCC: 3 | RNVC: 2
121-874-33-51-02-01: RNCC: 5 | RNVC: 2

12 Feb 1986

5340-14-482-6710
Lock Bolt

144826710
411371: RNCC: 3 | RNVC: 2
411371-004: RNCC: 5 | RNVC: 9

18 Jul 1996

5340-14-276-2509
Pipe Hanger

142762509
160-10352: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-529-5583
Mounting Bracket

145295583
330A65-3061-0001: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-438-6803
Plate Spacer

144386803
DHS756-132-28: RNCC: 3 | RNVC: 2

28 Mar 1990

5340-14-329-5226
Rod End Clevis

143295226
PAA13-09-002: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-411-0054
Quick Release Pin

144110054
1009-30: RNCC: 3 | RNVC: 2
Z00-12218-4: RNCC: 5 | RNVC: 2
1009-30: RNCC: 5 | RNVC: 2
1009-30: RNCC: 5 | RNVC: 9
85-693-2194: RNCC: 6 | RNVC: 9

28 Jul 1986

5340-14-362-7575
Control Rod

143627575
596-52-03-8: RNCC: 3 | RNVC: 2

19 Mar 1980

5340-14-469-1062
Mounting Bracket

144691062
305-424-101-0: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-14-391-2196
Mounting Plate

143912196
2-15298: RNCC: 3 | RNVC: 2

1 Mar 1984

5340-14-379-7208
Strap Fastener Loop

143797208
004995013P: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-535-0453
Cover Strip

145350453
T524A2001544: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-14-212-0280
Angle Bracket

142120280
23079398-9: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-225-1377
Friction Catch

142251377
N103: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-321-7262
Rod End Clevis

143217262
A11539: RNCC: 3 | RNVC: 2
314205: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-517-2136
Loop Clamp

145172136
2106011005: RNCC: 3 | RNVC: 2
9560170980: RNCC: 5 | RNVC: 2

17 Nov 1999

5340-14-464-0045
Mounting Bracket

144640045
23137503-2: RNCC: 3 | RNVC: 2

7 Jul 1993

5340-14-417-9904
Screw Hook

144179904
059684C01TRA: RNCC: 3 | RNVC: 2
059684C: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-547-8851
Eye Hook

145478851
SA30205: RNCC: 3 | RNVC: 2

22 Nov 2005

5340-14-471-7771
Mounting Plate

144717771
65683-5: RNCC: 3 | RNVC: 2
P01945: RNCC: 5 | RNVC: 2

14 Sep 1994

5340-14-479-5147
Mounting Bracket

144795147
23627185-9: RNCC: 3 | RNVC: 2

17 Jan 1996

5340-14-235-1227
Expansion Plug

142351227
R93910A200ACUT: RNCC: 2 | RNVC: 2
RDAC200UT: RNCC: 5 | RNVC: 2
70154: RNCC: 5 | RNVC: 2
77-70-154: RNCC: 5 | RNVC: 2
77701540W: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-436-4384
Rod End Clevis

144364384
21213523-00: RNCC: 3 | RNVC: 2
21313523: RNCC: 5 | RNVC: 2

3 Jan 1990

5340-14-442-9951
Mounting Plate

144429951
ZZ1236-2: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-14-514-1076
Mounting Bracket

145141076
5010044385: RNCC: 3 | RNVC: 2

26 Apr 1999

5340-14-552-2986
Lock-Release Lever

145522986
26-031-30: RNCC: 3 | RNVC: 2

11 Dec 2006

5340-14-314-2540
Retaining Strap

143142540
9743-096: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-397-5712
Leaf Spring

143975712
0000737364: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-539-3959
Strap Fastener Loop

145393959
T0616632D: RNCC: 3 | RNVC: 9

13 Jan 2004

5340-14-549-8841
Mounting Bracket

145498841
21105852-001: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-286-5122
Retaining Strap

142865122
341A21-1032-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-515-9702
Angle Bracket

145159702
312-00361-001: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-14-528-0332
Access Cover

145280332
114E437-01: RNCC: 3 | RNVC: 2
114E437-01: RNCC: 5 | RNVC: 9

12 Dec 2001

5340-14-518-1837
Mounting Plate

145181837
5010146399: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-534-5277
Handwheel

145345277
13-232-160: RNCC: 3 | RNVC: 1
13-232-160-14: RNCC: 3 | RNVC: 2

26 Mar 2003

5340-14-441-1978
Detent Plunger

144411978
3750: RNCC: 3 | RNVC: 2
91628257: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-14-279-6430
Padlock

142796430
NO PRIMARY REF14-279-6430: RNCC: 3 | RNVC: 2
3: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-316-4643
Loop Clamp

143164643
BN418-501F11H1: RNCC: 3 | RNVC: 2
2200038: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-441-2203
Mounting Bracket

144412203
6801V32-2155-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-522-3143
Retaining Strap

145223143
10311302: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-14-376-9100
Rod End Connector

143769100
C69589: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-268-0594
Rod End Clevis

142680594
NO PRIMARY REF14-268-0594: RNCC: 3 | RNVC: 2
4T03010532: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-473-8435
Mounting Bracket

144738435
332A72-1717-20: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-390-1662
Utility Access Door

143901662
366A87-1001-5401: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-383-6722
Access Cover

143836722
2096-17: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-429-9784
Flush Catch Claw

144299784
M4DS4020902623: RNCC: 3 | RNVC: 2

22 Feb 1989

5340-14-346-7195
Angle Bracket

143467195
414-01065-000: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-549-9201
Mounting Plate

145499201
2092527-001: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-437-5150
Angle Bracket

144375150
1BT05-03-07-010: RNCC: 3 | RNVC: 2

5 Feb 1990

5340-14-516-3850
Loop Clamp

145163850
ST46419: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-337-1183
Mending Plate

143371183
NO PRIMARY REF14-337-1183: RNCC: 3 | RNVC: 2
371652: RNCC: 5 | RNVC: 9

7 Oct 1976

5340-14-444-8776
Bridge Clamp

144448776
8711-483: RNCC: 3 | RNVC: 2
F300 0T 005 7640: RNCC: 6 | RNVC: 9

28 Jan 1991

5340-14-502-7237
Lock Bolt

145027237
1175857: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-512-5839
Mounting Plate

145125839
3BM03265AAAA: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-268-7518
Rod End Clevis

142687518
262-10-21871-06: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-450-5897
Snap Hook

144505897
04250/100/302: RNCC: 3 | RNVC: 2
4250-100-210: RNCC: 5 | RNVC: 2
4250-100-210: RNCC: 5 | RNVC: 2
04250-100-302: RNCC: 5 | RNVC: 2

14 Oct 1991

5340-14-541-5433
Bumper

145415433
2092586-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-503-1482
Door Button

145031482
PM1A239121008N1: RNCC: 3 | RNVC: 2
PM1A239121008N1: RNCC: 5 | RNVC: 2

7 Jan 1998

5340-14-508-2635
Angle Bracket

145082635
452-03544-000: RNCC: 3 | RNVC: 2
452-03544-000: RNCC: 5 | RNVC: 2

2 Sep 1998

5340-14-543-7499
Bumper

145437499
9300092: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-14-441-1123
Retaining Strap

144411123
20297958: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-298-8493
Turnbuckle Body

142988493
7098035: RNCC: 3 | RNVC: 2
7-098-035: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-387-7594
Access Cover

143877594
ST159-2M311-1P38: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-523-0686
Mounting Plate

145230686
0856 307 T 00: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-14-408-0721
Anchor Strap

144080721
NO PRIMARY REF14-408-0721: RNCC: 3 | RNVC: 2
124111: RNCC: 5 | RNVC: 2
124111: RNCC: 5 | RNVC: 9

19 Mar 1986

5340-14-325-5827
Rod End Clevis

143255827
16169-30: RNCC: 3 | RNVC: 2
1916M066: RNCC: 3 | RNVC: 2
1916M066: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-354-5029
Rod End Clevis

143545029
EA1M141-37-851: RNCC: 3 | RNVC: 2

31 Jan 1979

5340-14-505-2638
Mounting Plate

145052638
4-062-2-10401.01: RNCC: 3 | RNVC: 2

17 Mar 1998

5340-14-326-0453
Loop Clamp

143260453
3160S43-10-020: RNCC: 3 | RNVC: 2
85-800-4681: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-400-0754
Butt Hinge

144000754
214749: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-462-7480
Angle Bracket

144627480
LBR532A201-418: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-14-547-9618
Angle Bracket

145479618
RA1M701246031A1: RNCC: 3 | RNVC: 2

30 Nov 2005

5340-14-407-6545
Detent Plunger

144076545
NO PRIMARY REF14-407-6545: RNCC: 3 | RNVC: 2
VA8426: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-14-435-8142
Angle Bracket

144358142
332A21-1500-86: RNCC: 3 | RNVC: 2

22 Nov 1989

5340-14-537-4358
Bumper

145374358
24278: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-539-9302
Mounting Bracket

145399302
D66431-10: RNCC: 3 | RNVC: 2

24 Feb 2004

5340-14-438-0511
Block Clamp

144380511
M3R701-13-01: RNCC: 3 | RNVC: 2
2925AA1082049: RNCC: 6 | RNVC: 9

7 Mar 1990

5340-14-400-0279
Quick Release Pin

144000279
46133: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-288-4115
Mounting Plate

142884115
0211317080: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-537-4560
Hinge Torsion Bar

145374560
10655167: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-406-3765
Rod End Clevis

144063765
N262-1405-52112-10: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-532-1668
Loop Clamp

145321668
5010559014: RNCC: 3 | RNVC: 2

16 Oct 2002

5340-14-446-4541
Pipe Hanger

144464541
SUE074055011020: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-14-403-8410
Tubular Fairlead

144038410
100SP7-0056: RNCC: 3 | RNVC: 2

28 Aug 1985

5340-14-217-3056
Loop Clamp

142173056
3160S73-08-732: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-312-0270
Screw Hook

143120270
4080-43: RNCC: 3 | RNVC: 2
15154421: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-456-4553
Eye Hook

144564553
34038-3: RNCC: 3 | RNVC: 2
91610850: RNCC: 5 | RNVC: 2

2 Jul 1992

5340-14-275-1473
Rim Latch

142751473
D00369-41: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-447-1529
Rod End Connector

144471529
F00059412: RNCC: 3 | RNVC: 2
F00059412: RNCC: 5 | RNVC: 9

3 May 1991

5340-14-531-7074
Pipe Hanger

145317074
307-879-306-0: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-14-464-8297
Mortise Lock Set

144648297
SERRURE450P3DPB0C1-293: RNCC: 3 | RNVC: 2
450P3DPB0C1-293: RNCC: 5 | RNVC: 2

1 Sep 1993

5340-14-484-1845
Retaining Strap

144841845
5000749692: RNCC: 3 | RNVC: 2

31 Oct 1996

5340-14-531-2453
Access Cover

145312453
404487: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-14-353-5546
Access Cover

143535546
01244000020: RNCC: 3 | RNVC: 2
12440CBA: RNCC: 5 | RNVC: 2
12440CBA336: RNCC: 5 | RNVC: 2

16 Jan 1979

5340-14-411-7478
Caster Frame

144117478
11989: RNCC: 3 | RNVC: 2
3-11989: RNCC: 5 | RNVC: 2

27 Aug 1986

5340-14-341-0853
Rod End Clevis

143410853
16411014: RNCC: 3 | RNVC: 2
16411014: RNCC: 3 | RNVC: 9

16 Mar 1977

5340-14-464-3165
Mounting Plate

144643165
1011132: RNCC: 3 | RNVC: 2
1011132: RNCC: 5 | RNVC: 2

28 Jul 1993

5340-14-520-8807
Butt Hinge

145208807
50-1-3525: RNCC: 3 | RNVC: 2

21 Jun 2000

5340-14-532-1398
Access Cover

145321398
5010579376: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-14-441-1748
Metal Grille

144411748
20122409: RNCC: 3 | RNVC: 2
20122409: RNCC: 5 | RNVC: 9

22 Aug 1990

5340-14-515-6065
Bridge Clamp

145156065
A93000127: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-533-2964
Bow Handle

145332964
12-725-166: RNCC: 3 | RNVC: 2
SZ12.725.166: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-040-0089
Loop Clamp

140400089
0224990260: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-338-8055
Access Cover

143388055
175736: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-294-0232
Fusible Plug

142940232
NO PRIMARY REF14-294-0232: RNCC: 3 | RNVC: 2
EX366676: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-440-4005
Rod End Clevis

144404005
3097787: RNCC: 3 | RNVC: 2
3097787: RNCC: 5 | RNVC: 9

11 Jul 1990

5340-14-434-3001
Anchor Strap

144343001
556126: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-447-6410
Anchor Strap

144476410
5000917164: RNCC: 3 | RNVC: 2

29 May 1991

5340-14-501-2117
Mounting Plate

145012117
412413-201.22.03.90: RNCC: 3 | RNVC: 2
412413-201-22-03-90: RNCC: 3 | RNVC: 2
F300 0T 025 2522: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-454-8813
Anchor Strap

144548813
5000716376: RNCC: 3 | RNVC: 2

24 Apr 1992

5340-14-549-8469
Angle Bracket

145498469
2092789: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-451-2147
Rod End Clevis

144512147
PM1A379626013: RNCC: 3 | RNVC: 2
PM1A379626013: RNCC: 5 | RNVC: 2

6 Nov 1991

5340-14-484-7067
Plug Button

144847067
5912: RNCC: 3 | RNVC: 2

4 Dec 1996

5340-14-306-9953
Threaded Rod End

143069953
2-140252-5: RNCC: 3 | RNVC: 2
140252A: RNCC: 5 | RNVC: 9
2-140252-5: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-314-4835
Webbing Strap

143144835
40288: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-479-4616
Handwheel

144794616
0140049ACIE015: RNCC: 3 | RNVC: 9

12 Jan 1996

5340-14-260-4247
Loop Clamp

142604247
501-779-685-0: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-291-1140
Loop Clamp

142911140
352401: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-493-8199
Pipe Hanger

144938199
5000821403: RNCC: 3 | RNVC: 2
0500003-9: RNCC: 5 | RNVC: 9
F300 0T 014 1504: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-380-0142
Webbing Strap

143800142
RT35311: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-282-5749
Clamping Catch

142825749
140373: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-222-6463
Strap Fastener Loop

142226463
2559I: RNCC: 3 | RNVC: 2
LFP54-414: RNCC: 3 | RNVC: 2
2559I: RNCC: 5 | RNVC: 9
LFP54-414: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-372-1018
Mending Plate

143721018
NO PRIMARY REF14-372-1018: RNCC: 3 | RNVC: 2
99330441047: RNCC: 5 | RNVC: 9
30136012: RNCC: 5 | RNVC: 9

1 Sep 1981

5340-14-242-2442
Retaining Strap

142422442
NO PRIMARY REF14-242-2442: RNCC: 3 | RNVC: 2
6812: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-320-7201
Angle Bracket

143207201
121S64-267-07-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-505-2206
Mounting Plate

145052206
15172616: RNCC: 3 | RNVC: 2

13 Mar 1998

5340-14-438-0477
Retaining Strap

144380477
7150-75: RNCC: 3 | RNVC: 2
9253329380: RNCC: 5 | RNVC: 2

7 Mar 1990

5340-14-398-9526
Mounting Plate

143989526
NO PRIMARY REF14-398-9526: RNCC: 3 | RNVC: 2
346-63722-1: RNCC: 5 | RNVC: 9
346637221: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-548-4294
Loop Clamp

145484294
EN4114F30WR1: RNCC: 2 | RNVC: 2

16 Jan 2006

5340-14-295-4633
Synchro Clamp

142954633
415713: RNCC: 3 | RNVC: 2
415713: RNCC: 5 | RNVC: 2
415713: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-436-2102
Mounting Plate

144362102
DA2C228652A2: RNCC: 3 | RNVC: 2

6 Dec 1989

5340-14-353-1179
Bumper

143531179
RC55-39: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-371-2830
Expansion Plug

143712830
E29584A160AGTT: RNCC: 2 | RNVC: 2
R93911A160AGTT: RNCC: 5 | RNVC: 2
E29584-16AT: RNCC: 5 | RNVC: 2
R93911-16AT: RNCC: 5 | RNVC: 2

5 Aug 1981

5340-14-362-3823
Magnetic Catch

143623823
LM5202: RNCC: 3 | RNVC: 2
ST453M12P01-22: RNCC: 5 | RNVC: 2
80X2242A002: RNCC: 5 | RNVC: 9
ST453M12P01-22: RNCC: 5 | RNVC: 9
F300 0T 018 1802: RNCC: 6 | RNVC: 9

19 Mar 1980

5340-14-403-5083
Retaining Band

144035083
9760-113: RNCC: 3 | RNVC: 9

21 Aug 1985

5340-14-403-3778
Belt-Strap Keeper

144033778
006099050P: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-040-0178
Retaining Strap

140400178
0249920940: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-228-0821
Access Cover

142280821
0067010740: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-478-1602
Access Cover

144781602
CCN301-410-415A1: RNCC: 3 | RNVC: 2
CCN301410415A1: RNCC: 5 | RNVC: 2

11 Oct 1995

5340-14-480-2721
Angle Bracket

144802721
T700A5210446102: RNCC: 3 | RNVC: 2

28 Feb 1996

5340-14-537-2191
Snap Hook

145372191
M23: RNCC: 3 | RNVC: 2
3342540055445: RNCC: 5 | RNVC: 2

15 Oct 2003

5340-14-502-6226
Mounting Bracket

145026226
5828118010: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-380-2814
Pipe Hanger

143802814
360A62-1177-20: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-503-3622
Mounting Bracket

145033622
5010117079: RNCC: 3 | RNVC: 2

14 Jan 1998

5340-14-403-2900
Rod End Clevis

144032900
5204-51-057: RNCC: 3 | RNVC: 2
520451057: RNCC: 5 | RNVC: 2
5204-51-057: RNCC: 5 | RNVC: 9

8 Aug 1985

5340-14-361-6449
Webbing Strap

143616449
92-0-568300-0: RNCC: 3 | RNVC: 2
9205683000: RNCC: 3 | RNVC: 2
9-205683-000: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-14-481-8779
Access Cover

144818779
20715513: RNCC: 3 | RNVC: 2

6 Jun 1996

5340-14-466-7459
Webbing Strap

144667459
3511 192 17941: RNCC: 3 | RNVC: 2
3511-192-17941: RNCC: 5 | RNVC: 2

24 Nov 1993

5340-14-397-4303
Webbing Strap

143974303
100-25: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-544-3423
Access Cover

145443423
82069420000: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-14-551-3292
Mounting Bracket

145513292
EPM75: RNCC: 3 | RNVC: 2
AA004390: RNCC: 6 | RNVC: 9

12 Sep 2006

5340-14-493-4555
Utility Access Door

144934555
410732: RNCC: 3 | RNVC: 2
F300 0T 013 1059: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-520-7365
Arched Cushion

145207365
MAT169-0027F19DE33-7: RNCC: 3 | RNVC: 2

6 Jun 2000

5340-14-476-9710
Protection Bellows

144769710
RA1M295713130: RNCC: 3 | RNVC: 2

12 Jul 1995

5340-14-364-5189
Rod End Connector

143645189
5000117657: RNCC: 3 | RNVC: 2
5000117657: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-224-8833
Bumper

142248833
GSM1674A43: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-401-8722
Eye Hook

144018722
437149: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-345-0639
Mending Plate

143450639
327297: RNCC: 3 | RNVC: 2
20327297-8: RNCC: 5 | RNVC: 2

5 Oct 1977

5340-14-437-9532
Mounting Bracket

144379532
330A25-0513-21: RNCC: 3 | RNVC: 2

28 Feb 1990

5340-14-217-9183
Cover Strip

142179183
3160S25-29-073: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-377-9360
Expansion Shield

143779360
90-50: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-296-1327
Loop Clamp

142961327
341A41-1000-05: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-249-4259
Cover Strip

142494259
M3C232-25-832: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-365-5495
Rod End Clevis

143655495
160-61569-01A: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-529-8847
Mounting Bracket

145298847
OB0742: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-510-2085
Rim Lock

145102085
CE1700-01L13-17PERCER1: RNCC: 3 | RNVC: 2
5340AA8016037: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-484-6564
Mounting Bracket

144846564
29402931: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-519-3685
Bridge Clamp

145193685
350A91-0018-15: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-573-1126
Utility Guard Rail Section

145731126
RAMBA02943X00: RNCC: 3 | RNVC: 2

14 Sep 2012

5340-14-364-2189
Loop Clamp

143642189
CR2840: RNCC: 3 | RNVC: 9

7 Aug 1980

5340-14-508-5380
Mounting Bracket

145085380
FH137009000: RNCC: 3 | RNVC: 2

16 Sep 1998

5340-14-555-4261
Mounting Bracket

145554261
19227108: RNCC: 3 | RNVC: 2

9 Nov 2007

5340-14-296-0707
Webbing Strap

142960707
EL20-13: RNCC: 3 | RNVC: 2
EL20-13: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-272-3894
Bumper

142723894
NO PRIMARY REF14-272-3894: RNCC: 3 | RNVC: 2
PA4548012P64: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-410-7498
Retaining Strap

144107498
A02358-04-2000P006: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-473-8457
Mounting Bracket

144738457
332A72-2508-20: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-514-0749
Pawl Fastener Set

145140749
PM1A005001N01: RNCC: 3 | RNVC: 2
PM1A005001N01: RNCC: 5 | RNVC: 2
MJBJ: RNCC: 5 | RNVC: 9

22 Apr 1999

5340-14-477-2497
Retaining Strap

144772497
RA1M210853151: RNCC: 3 | RNVC: 2

2 Aug 1995

5340-14-532-0606
Cover Strip

145320606
03-250-563: RNCC: 3 | RNVC: 2
SZ03.250.563: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-516-5916
Loop Clamp

145165916
SKO995.019: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-14-383-1029
Loop Clamp

143831029
320-120-101-0: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-500-7101
Section Block Clamp

145007101
E64009998207: RNCC: 3 | RNVC: 2
F300 0T 024 7293: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-412-1456
Bow Handle

144121456
553096G0006: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-421-2357
Angle Bracket

144212357
CS100: RNCC: 3 | RNVC: 2
552123: RNCC: 3 | RNVC: 2
102105: RNCC: 3 | RNVC: 9
63127: RNCC: 5 | RNVC: 2
CS100: RNCC: 5 | RNVC: 2

11 Jan 1988

5340-14-325-6332
Loop Clamp

143256332
121S71-242-27-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-453-7546
Mounting Bracket

144537546
2085-08-005: RNCC: 3 | RNVC: 2
89411741: RNCC: 5 | RNVC: 9

5 Mar 1992

5340-14-298-2389
Loop Clamp

142982389
MASE105: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-300-3351
Butt Hinge

143003351
15436797: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-452-7648
Mounting Plate

144527648
A420-001: RNCC: 3 | RNVC: 2

15 Jan 1992

5340-14-522-3211
Mounting Plate

145223211
10472742: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-14-544-5511
Webbing Strap

145445511
82078719000: RNCC: 3 | RNVC: 2

9 Feb 2005

5340-14-537-7405
Mounting Bracket

145377405
PCC260: RNCC: 3 | RNVC: 2

19 Nov 2003

5340-14-484-8999
Angle Bracket

144848999
189316-215: RNCC: 3 | RNVC: 9

12 Dec 1996

5340-14-502-8048
Retaining Clip

145028048
8T1890: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-389-2106
Loop Clamp

143892106
F10A723104A1: RNCC: 3 | RNVC: 2
85-692-4423: RNCC: 6 | RNVC: 9

29 Nov 1983

5340-14-514-0469
Angle Bracket

145140469
RA1M112141521: RNCC: 3 | RNVC: 2

22 Apr 1999

5340-14-462-0305
Mounting Bracket

144620305
A82470-1: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-489-5380
Mounting Plate

144895380
29688157: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-14-537-4861
Mounting Plate

145374861
6501DME110012: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-337-4701
Access Cover

143374701
NO PRIMARY REF14-337-4701: RNCC: 3 | RNVC: 2
006481: RNCC: 5 | RNVC: 9

7 Oct 1976

5340-14-381-0737
Mounting Plate

143810737
0274603580: RNCC: 3 | RNVC: 2
302-139-201-0: RNCC: 5 | RNVC: 2

14 Dec 1982

5340-14-539-5666
Mounting Bracket

145395666
10542565: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-553-4646
Catch Strike

145534646
CCN301-201-420A1: RNCC: 3 | RNVC: 2

5 Apr 2007

5340-14-551-8749
Latch Bar

145518749
43043111: RNCC: 3 | RNVC: 2
43043111: RNCC: 3 | RNVC: 9

6 Nov 2006

5340-14-510-2192
Catch Strike

145102192
FH1E220-70RS1: RNCC: 3 | RNVC: 2
5340AA8016457: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-420-6718
Catch Strike

144206718
NO PRIMARY REF14-420-6718: RNCC: 3 | RNVC: 2
15712-4: RNCC: 5 | RNVC: 9

16 Dec 1987

5340-14-329-5433
Catch Strike

143295433
T20-13B466: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-345-1551
Catch Strike

143451551
FD1B216-13: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-509-9848
Latch Bar

145099848
NO PRIMARY REF14-509-9848: RNCC: 3 | RNVC: 2
22895-05U01: RNCC: 5 | RNVC: 9
5340AA1131753: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-283-3797
Catch Strike

142833797
F231-25824: RNCC: 3 | RNVC: 2
F231-25-824: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-397-9630
Catch Strike

143979630
NO PRIMARY REF14-397-9630: RNCC: 3 | RNVC: 2
12934-4: RNCC: 5 | RNVC: 9

31 Jan 1985

5340-14-431-2594
Catch Strike

144312594
332A22-1411-27: RNCC: 3 | RNVC: 2
F300 0T 009 8738: RNCC: 5 | RNVC: 9

12 Apr 1989

5340-14-348-7301
Spring Window Bolt

143487301
ST453UM11G01: RNCC: 3 | RNVC: 2
ST453M2G01: RNCC: 5 | RNVC: 9
ST453M2G01: RNCC: 5 | RNVC: 9

19 Apr 1978

5340-14-283-3165
Catch Strike

142833165
F220-013: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-516-5854
Barrel Bolt

145165854
AER310200: RNCC: 3 | RNVC: 2
9550176130: RNCC: 5 | RNVC: 2
AER310-200: RNCC: 5 | RNVC: 2

6 Oct 1999

5340-14-453-2187
Catch Strike

144532187
AC.109-BR: RNCC: 3 | RNVC: 2
AC109BR: RNCC: 5 | RNVC: 2
AC109: RNCC: 5 | RNVC: 9

11 Feb 1992

5340-14-521-7035
Barrel Bolt

145217035
160-888344: RNCC: 3 | RNVC: 2

6 Sep 2000

5340-14-390-6301
Barrel Bolt

143906301
R0NIS1048: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-329-9266
Catch Strike

143299266
91312697: RNCC: 3 | RNVC: 2
AC.148-IB: RNCC: 3 | RNVC: 2
AC14818: RNCC: 5 | RNVC: 2
AC148IB: RNCC: 5 | RNVC: 2
91312697: RNCC: 5 | RNVC: 2
91312697: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-401-3043
Catch Strike

144013043
229485: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-468-7402
Catch Strike

144687402
PM1A713511001: RNCC: 3 | RNVC: 2
PM1A713511001: RNCC: 5 | RNVC: 2

16 Mar 1994

5340-14-550-5898
Catch Strike

145505898
14215PN CATAPHORESE NOIRE: RNCC: 3 | RNVC: 2

28 Jun 2006

5340-14-425-0024
Barrel Bolt

144250024
865-27: RNCC: 3 | RNVC: 2
865-27: RNCC: 5 | RNVC: 2
91608890: RNCC: 5 | RNVC: 2

16 Jun 1988

5340-14-427-6992
Barrel Bolt

144276992
5828348022: RNCC: 3 | RNVC: 2

4 Nov 1988

5340-14-468-3710
Catch Strike

144683710
1081711D00: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-14-429-9987
Catch Strike

144299987
DA2C230337A1: RNCC: 3 | RNVC: 2

22 Feb 1989

5340-14-456-1442
Catch Strike

144561442
5000819645: RNCC: 3 | RNVC: 2
5000809372: RNCC: 5 | RNVC: 9

18 Jun 1992

5340-14-382-9564
Catch Strike

143829564
BAZ92156: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-306-0074
Catch Strike

143060074
A10-54-104-13-0: RNCC: 3 | RNVC: 2
A10-54-104-13-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-298-1932
Catch Strike

142981932
178681: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-467-6257
Catch Strike

144676257
702850001320: RNCC: 3 | RNVC: 2
7028-5000-1320: RNCC: 5 | RNVC: 2

19 Jan 1994

5340-14-402-6861
Flush Bolt

144026861
401149: RNCC: 3 | RNVC: 2
BGE401149: RNCC: 3 | RNVC: 2

19 Jul 1985

5340-14-371-9626
Catch Strike

143719626
8812041110: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-431-2592
Catch Strike

144312592
332A22-1411-25: RNCC: 3 | RNVC: 2
F300 0T 009 8488: RNCC: 5 | RNVC: 9

12 Apr 1989

5340-14-375-2821
Flush Bolt

143752821
ST406M31G27: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-356-3250
Catch Strike

143563250
FH1B212-56880: RNCC: 3 | RNVC: 2

25 Apr 1979

5340-14-407-2017
Catch Strike

144072017
9165-19: RNCC: 3 | RNVC: 2
7371808300: RNCC: 5 | RNVC: 2

12 Feb 1986

5340-14-320-4368
Catch Strike

143204368
AC103BR: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-393-4266
Mortise Bolt

143934266
F0331AB: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-536-3469
Spring Window Bolt

145363469
4200034: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-14-549-5548
Catch Strike

145495548
EPIST0E310321: RNCC: 3 | RNVC: 2

14 Apr 2006

5340-14-516-8596
Catch Strike

145168596
101164011140: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-14-527-0769
Catch Strike

145270769
5000819646: RNCC: 3 | RNVC: 2

1 Oct 2001

5340-14-403-3465
Catch Strike

144033465
AC.160-ZB: RNCC: 3 | RNVC: 2
AC160ZB: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-417-0745
Catch Strike

144170745
970362: RNCC: 3 | RNVC: 2
970362: RNCC: 5 | RNVC: 9

1 Jul 1987

5340-14-304-7528
Catch Strike

143047528
E4M221-66-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-414-3926
Catch Strike

144143926
DA1D230319533: RNCC: 3 | RNVC: 2

28 Jan 1987

5340-14-406-9889
Barrel Bolt

144069889
155-35X30X12LAITON POLI: RNCC: 3 | RNVC: 2

22 Jan 1986

5340-14-407-7293
Spring Window Bolt

144077293
11-26576REP13: RNCC: 3 | RNVC: 2
11-26576REP13: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-14-380-2866
Catch Strike

143802866
365A24-1018-18: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-322-8370
Catch Strike

143228370
42590: RNCC: 3 | RNVC: 2
110250: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-499-4621
Catch Strike

144994621
10-060-00: RNCC: 3 | RNVC: 2
10-060-00: RNCC: 3 | RNVC: 2
10-060-00: RNCC: 5 | RNVC: 9
F300 0T 022 4599: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-455-3586
Catch Strike

144553586
509-23: RNCC: 3 | RNVC: 2
509: RNCC: 5 | RNVC: 2
5516003820: RNCC: 5 | RNVC: 2

21 May 1992

5340-14-414-3380
Catch Strike

144143380
DA1D220000141: RNCC: 3 | RNVC: 2

28 Jan 1987

5340-14-438-9259
Catch Strike

144389259
332A67-1937-25: RNCC: 3 | RNVC: 2

11 Apr 1990

5340-14-411-4889
Catch Strike

144114889
CAGS5: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-382-9319
Catch Strike

143829319
25683: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-444-6448
Barrel Bolt

144446448
90DD130205: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-14-472-2228
Catch Strike

144722228
330320: RNCC: 3 | RNVC: 2
330320: RNCC: 5 | RNVC: 9

12 Oct 1994

5340-14-370-7644
Barrel Bolt

143707644
M0369: RNCC: 3 | RNVC: 2
198002-0000: RNCC: 5 | RNVC: 2
198002-0028: RNCC: 5 | RNVC: 2
903033: RNCC: 5 | RNVC: 2
682: RNCC: 5 | RNVC: 2
682A: RNCC: 5 | RNVC: 2

5 Jun 1981

5340-14-461-1542
Catch Strike

144611542
2537854: RNCC: 3 | RNVC: 2
25.37854: RNCC: 5 | RNVC: 2
91743863: RNCC: 5 | RNVC: 2
250203F605: RNCC: 5 | RNVC: 2

24 Feb 1993

5340-14-457-6115
Catch Strike

144576115
PM1A713164405A1: RNCC: 3 | RNVC: 2
PM1A713164405A1: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-518-9697
Catch Strike

145189697
705143: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-367-6218
Catch Strike

143676218
VDP1169: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-484-1168
Catch Strike

144841168
7005-51ACIERZINGUE: RNCC: 3 | RNVC: 2
91770267: RNCC: 5 | RNVC: 2

24 Oct 1996

5340-14-412-2026
Catch Strike

144122026
330A25-0119-22: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-409-9347
Catch Strike

144099347
9141-15: RNCC: 3 | RNVC: 2
9165-39: RNCC: 5 | RNVC: 2
9223356880: RNCC: 5 | RNVC: 2
9223356880: RNCC: 5 | RNVC: 2

4 Jun 1986

5340-14-501-3181
Catch Strike

145013181
AC122IB: RNCC: 3 | RNVC: 2
820643: RNCC: 3 | RNVC: 2
4CR113IB: RNCC: 5 | RNVC: 2
89172: RNCC: 5 | RNVC: 2
89172-024: RNCC: 5 | RNVC: 2
F300 0T 025 3592: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-399-8760
Catch Strike

143998760
AC118IB: RNCC: 3 | RNVC: 2
91300025: RNCC: 5 | RNVC: 2

11 Apr 1985

5340-14-413-5181
Catch Strike

144135181
NO PRIMARY REF14-413-5181: RNCC: 3 | RNVC: 2
429205-6: RNCC: 5 | RNVC: 2

17 Dec 1986

5340-14-545-1774
Catch Strike

145451774
S711A4014104: RNCC: 3 | RNVC: 2

23 Mar 2005

5340-14-515-4577
Catch Strike

145154577
272040: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-341-1420
Catch Strike

143411420
16397737: RNCC: 3 | RNVC: 2
16397737: RNCC: 3 | RNVC: 9

16 Mar 1977

5340-14-502-9953
Catch Strike

145029953
330A22-2427-03: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-338-7692
Catch Strike

143387692
VITH20-18300: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-465-1449
Catch Strike

144651449
365A21-5089-20: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-435-9639
Catch Strike

144359639
332A25-1049-06: RNCC: 3 | RNVC: 2

29 Nov 1989

5340-14-438-9258
Catch Strike

144389258
332A67-1937-24: RNCC: 3 | RNVC: 2

11 Apr 1990

5340-14-434-3764
Catch Strike

144343764
332A23-0149-23: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-297-4202
Barrel Bolt

142974202
TR1-30LAIT0N: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-424-8730
Catch Strike

144248730
350A25-1086-00: RNCC: 3 | RNVC: 2

9 Jun 1988

5340-14-507-1245
Catch Strike

145071245
5010071542: RNCC: 3 | RNVC: 2

15 Jun 1998

5340-14-251-5359
Catch Strike

142515359
E4M221-24-870: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-466-2250
Catch Strike

144662250
Z00025-00-0000P008: RNCC: 3 | RNVC: 2

2 Nov 1993

5340-14-369-7916
Catch Strike

143697916
30-14215IB: RNCC: 3 | RNVC: 2
30/14215IB: RNCC: 5 | RNVC: 2
LH91228: RNCC: 5 | RNVC: 2
30-4215IB: RNCC: 5 | RNVC: 2

17 Apr 1981

5340-14-454-6926
Spring Window Bolt

144546926
2085-01-006: RNCC: 3 | RNVC: 2
89411555: RNCC: 5 | RNVC: 9

9 Apr 1992

5340-14-345-1563
Catch Strike

143451563
FD1B221-22980: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-377-1277
Catch Strike

143771277
AK861-127: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-363-0933
Catch Strike

143630933
AC161CB: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-14-437-4440
Catch Strike

144374440
332A25-1101-25: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-378-9720
Catch Strike

143789720
004643010P: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-286-4075
Catch Strike

142864075
AMX406M12P148: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-554-7317
Catch Strike

145547317
M781076: RNCC: 3 | RNVC: 2

8 Aug 2007

5340-14-402-7137
Catch Strike

144027137
4CR116P01: RNCC: 3 | RNVC: 2
LH93161ZB24X5IR: RNCC: 5 | RNVC: 9

19 Jul 1985

5340-14-371-5837
Catch Strike

143715837
FH1E292-51910: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-483-0143
Mortise Bolt

144830143
PM1A713310420: RNCC: 3 | RNVC: 2
PM1A713310420: RNCC: 5 | RNVC: 2

1 Aug 1996

5340-14-376-4465
Spring Window Bolt

143764465
16326108: RNCC: 3 | RNVC: 2
16326108: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-447-3329
Catch Strike

144473329
1181133: RNCC: 3 | RNVC: 2
1181133: RNCC: 5 | RNVC: 2

15 May 1991

5340-14-481-5218
Barrel Bolt

144815218
138895: RNCC: 3 | RNVC: 2

14 May 1996

5340-14-526-9211
Catch Strike

145269211
702650001320: RNCC: 3 | RNVC: 2
AC.135-ZB: RNCC: 3 | RNVC: 2
AC135ZB: RNCC: 5 | RNVC: 2

18 Sep 2001

5340-14-459-6867
Catch Strike

144596867
A10111-01-1000P001: RNCC: 3 | RNVC: 2
44021398: RNCC: 3 | RNVC: 2
44021398: RNCC: 5 | RNVC: 9

10 Dec 1992

5340-14-322-9191
Catch Strike

143229191
188771: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-485-7811
Catch Strike

144857811
T7128246: RNCC: 3 | RNVC: 2
P71282-46T: RNCC: 5 | RNVC: 2
T71282-46: RNCC: 5 | RNVC: 2

12 Feb 1997

5340-14-473-3845
Catch Strike

144733845
332A25-1368-21: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-552-8414
Catch Strike

145528414
F291-61970DP: RNCC: 3 | RNVC: 2

7 Feb 2007

5340-14-428-2801
Spring Window Bolt

144282801
19A1657: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-446-4989
Spring Window Bolt

144464989
81005062: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-14-460-3963
Catch Strike

144603963
44021421: RNCC: 3 | RNVC: 2
A10111-02-1020P004: RNCC: 3 | RNVC: 2
44021421: RNCC: 5 | RNVC: 9

21 Jan 1993

5340-14-285-9759
Catch Strike

142859759
15144221: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-375-2939
Catch Strike

143752939
4819: RNCC: 3 | RNVC: 2

11 Dec 2002

5340-14-291-5892
Barrel Bolt

142915892
4R013309: RNCC: 3 | RNVC: 2
4R013309: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-552-0431
Shelf Bracket

145520431
0249870840: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-14-319-1175
Angle Bracket

143191175
M130591: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-546-6022
Retaining Strap

145466022
RPL741130003B1: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-14-549-9259
Mounting Plate

145499259
41106678: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-524-1746
Cable Retractor

145241746
2241902: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-483-4496
Permanent Magnet

144834496
5000920999: RNCC: 3 | RNVC: 2

12 Sep 1996

5340-14-475-1901
Synchro Clamp

144751901
RA1M240730120: RNCC: 3 | RNVC: 2

22 Mar 1995

5340-14-344-2024
Retaining Strap

143442024
061216196: RNCC: 3 | RNVC: 9

10 Aug 1977

5340-14-356-4862
Angle Bracket

143564862
PATTETA2: RNCC: 3 | RNVC: 2

15 May 1979

5340-14-554-8818
Loop Clamp

145548818
78651RH13CG: RNCC: 1 | RNVC: 2
78651RH13CG: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-532-1340
Mounting Plate

145321340
5010559747: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-14-382-4677
Retaining Strap

143824677
387120: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-485-5388
Mounting Bracket

144855388
15439172: RNCC: 3 | RNVC: 2

29 Jan 1997

5340-14-461-1161
Strap Hinge

144611161
27.44399PF: RNCC: 3 | RNVC: 2

24 Feb 1993

5340-14-445-3881
Mounting Bracket

144453881
BLC234194: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-14-519-4671
Mounting Plate

145194671
708138: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-450-5000
Retaining Strap

144505000
BLC238948: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-14-437-9695
Plate Spacer

144379695
5000497512: RNCC: 3 | RNVC: 2

5 Mar 1990

5340-14-554-1742
Mounting Bracket

145541742
82070956001: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-438-1647
Mounting Plate

144381647
DA2C204117411: RNCC: 3 | RNVC: 2

7 Mar 1990

5340-14-485-2835
Protection Bellows

144852835
RP1A705951111: RNCC: 3 | RNVC: 2

15 Jan 1997

5340-14-508-1234
Mounting Plate

145081234
ER4048: RNCC: 3 | RNVC: 2
10217123: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-471-5043
Protection Bellows

144715043
234800000: RNCC: 3 | RNVC: 2
BLC234810: RNCC: 5 | RNVC: 2

31 Aug 1994

5340-14-377-2555
Angle Bracket

143772555
366A58-0110-90: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-555-3973
Bridge Clamp

145553973
19226785: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-14-526-9604
Lock Bolt

145269604
10607267: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-390-5188
Rim Lock Set

143905188
80970-3852: RNCC: 3 | RNVC: 2
350649: RNCC: 5 | RNVC: 9
A9688-7: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-14-361-7445
Mounting Plate

143617445
16197762: RNCC: 3 | RNVC: 2
16197762: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-14-517-1433
Mounting Bracket

145171433
270-00-000-C: RNCC: 3 | RNVC: 2
270-00-000-A: RNCC: 5 | RNVC: 2

10 Nov 1999

5340-14-519-5380
Compression Cup

145195380
069544: RNCC: 3 | RNVC: 9

22 Mar 2000

5340-14-427-1850
Rod End Connector

144271850
MBEU60764: RNCC: 3 | RNVC: 2
MBEU60764-4: RNCC: 3 | RNVC: 2
035483: RNCC: 5 | RNVC: 2
035872: RNCC: 5 | RNVC: 2

6 Oct 1988

5340-14-403-6036
Eye Hook

144036036
CAP10-10-19-20: RNCC: 3 | RNVC: 9

21 Aug 1985

5340-14-531-8253
Butt Hinge

145318253
341A65-7715-23: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-438-4132
Mounting Bracket

144384132
815-1-31-700: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-475-7856
Clamping Catch

144757856
7-25-24-06: RNCC: 3 | RNVC: 2
43192002: RNCC: 5 | RNVC: 2
3192002: RNCC: 5 | RNVC: 2
7252406: RNCC: 5 | RNVC: 2
BH2006: RNCC: 5 | RNVC: 2
TKF7-25-24-06: RNCC: 5 | RNVC: 9

3 May 1995

5340-14-470-1486
Mounting Plate

144701486
76058011500: RNCC: 3 | RNVC: 2
572943-00: RNCC: 5 | RNVC: 2

1 Jun 1994

5340-14-310-7360
Access Cover

143107360
TH20N206-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-450-0022
Protection Bellows

144500022
5516010787: RNCC: 3 | RNVC: 2

18 Sep 1991

5340-14-473-8181
Mounting Bracket

144738181
332A25-1188-20: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-432-7671
Angle Bracket

144327671
X555326: RNCC: 3 | RNVC: 2
X555326-79224: RNCC: 5 | RNVC: 2

26 Jun 1989

5340-14-522-2980
Cushioning Pad

145222980
27160448-1: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-14-426-1240
Webbing Strap

144261240
39232464: RNCC: 3 | RNVC: 2
39232464: RNCC: 5 | RNVC: 9

4 Aug 1988

5340-14-414-9323
Handwheel

144149323
1980-65-3-04R: RNCC: 3 | RNVC: 2
1980-65-3-04: RNCC: 5 | RNVC: 2

25 Mar 1987

5340-14-539-7412
Mounting Bracket

145397412
21241984-00: RNCC: 3 | RNVC: 2
21241984-7: RNCC: 5 | RNVC: 2

5 Feb 2004

5340-14-473-6660
Mounting Plate

144736660
332A63-4321-20: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-267-4953
Control Rod

142674953
3FA160-15505: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-552-8847
Mounting Plate

145528847
82075141000: RNCC: 3 | RNVC: 2

10 Feb 2007

5340-14-549-0825
Cover Strip

145490825
RA1M721325725A1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-383-5348
Retaining Strap

143835348
20190482: RNCC: 3 | RNVC: 2
20190482: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-505-6839
Rod End Clevis

145056839
324204: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-351-1354
Access Cover

143511354
210897: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-419-6709
Plug Button

144196709
24006003700: RNCC: 3 | RNVC: 2
240060037: RNCC: 5 | RNVC: 2
420683: RNCC: 5 | RNVC: 2

30 Oct 1987

5340-14-504-6055
Access Cover

145046055
0390302397: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-14-313-8203
Access Cover

143138203
L038297: RNCC: 3 | RNVC: 2
L038297: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-459-2447
Access Cover

144592447
2090-243D510: RNCC: 3 | RNVC: 2
2090-243D510: RNCC: 5 | RNVC: 2

19 Nov 1992

5340-14-408-9066
Access Cover

144089066
251588460: RNCC: 3 | RNVC: 2
158846: RNCC: 5 | RNVC: 2

2 Apr 1986

5340-14-360-3340
Anchor Strap

143603340
NBC10AHE109: RNCC: 3 | RNVC: 2

23 Nov 1979

5340-14-507-9421
Access Cover

145079421
578706G4006: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-296-9591
Rod End Clevis

142969591
3028260: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-208-1435
Access Cover

142081435
100940: RNCC: 3 | RNVC: 9

1 Jan 1964

5340-14-429-6714
Anchor Strap

144296714
032465Z02TRA: RNCC: 3 | RNVC: 2
032465Z: RNCC: 5 | RNVC: 2

8 Feb 1989

5340-14-369-8993
Bumper

143698993
1105769700: RNCC: 3 | RNVC: 2
57697: RNCC: 5 | RNVC: 2

18 May 1981

5340-14-365-3272
Access Cover

143653272
0064760490: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-335-3597
Access Cover

143353597
192391: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-335-9750
Pipe Hanger

143359750
121E71-311-56-0: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-545-9382
Access Cover

145459382
713832: RNCC: 3 | RNVC: 2

30 May 2005

5340-14-315-3010
Access Cover

143153010
156556: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-340-8840
Key Blank

143408840
50X90X850ACB165TRAITE: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-442-2150
Access Cover

144422150
39233053: RNCC: 3 | RNVC: 2
1804060: RNCC: 5 | RNVC: 2
39233053: RNCC: 5 | RNVC: 9

3 Oct 1990

5340-14-355-1783
Anchor Strap

143551783
0000140905: RNCC: 3 | RNVC: 2
0000140905: RNCC: 5 | RNVC: 9
140905: RNCC: 5 | RNVC: 9

19 Mar 1979

5340-14-366-7773
Access Cover

143667773
158717: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-524-8962
Access Cover

145248962
29492874: RNCC: 3 | RNVC: 2

25 Apr 2001

5340-14-356-1888
Rod End Connector

143561888
16320836: RNCC: 3 | RNVC: 2
16320836: RNCC: 5 | RNVC: 9

25 Apr 1979

5340-14-503-6955
Rod End Clevis

145036955
215773: RNCC: 3 | RNVC: 2
215773: RNCC: 5 | RNVC: 2

27 Jan 1998

5340-14-355-1822
Mending Plate

143551822
5000500676: RNCC: 3 | RNVC: 2
5000500676: RNCC: 5 | RNVC: 9

19 Mar 1979

5340-14-514-5358
Plug Button

145145358
98440944403: RNCC: 3 | RNVC: 2

26 May 1999

5340-14-520-5894
Runner

145205894
P2117130115: RNCC: 3 | RNVC: 2
32117130115: RNCC: 3 | RNVC: 9
SDM32117130115: RNCC: 5 | RNVC: 9

24 May 2000

5340-14-332-8110
Runner

143328110
573895924: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-354-2385
Access Cover

143542385
16320925: RNCC: 3 | RNVC: 2
16320925: RNCC: 5 | RNVC: 9

30 Jan 1979

5340-14-394-9479
Anchor Strap

143949479
20320623: RNCC: 3 | RNVC: 2
20320623: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-445-7631
Access Cover

144457631
BLC236383: RNCC: 3 | RNVC: 2

25 Feb 1991

5340-14-505-8369
Access Cover

145058369
96166470: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-370-5861
Angle Bracket

143705861
A11B232172010: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-382-7510
Rod End Clevis

143827510
X552861: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-523-0909
Access Cover

145230909
F1392682: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-14-456-2872
Access Cover

144562872
4173E5: RNCC: 3 | RNVC: 2
89406812: RNCC: 5 | RNVC: 2

25 Jun 1992

5340-14-555-1303
Access Cover

145551303
82148365000: RNCC: 3 | RNVC: 2

3 Oct 2007

5340-14-375-2914
Anchor Strap

143752914
136-145: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-305-7965
Access Cover

143057965
4083C0UVERCLE: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-505-6341
Access Cover

145056341
13230049: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-495-8145
Access Cover

144958145
40147230: RNCC: 3 | RNVC: 2
F300 0T 020 1431: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-540-8762
Access Cover

145408762
63658: RNCC: 3 | RNVC: 2

29 Apr 2004

5340-14-503-1103
Access Cover

145031103
0120770601: RNCC: 3 | RNVC: 2
0120770601: RNCC: 5 | RNVC: 2

7 Jan 1998

5340-14-552-7870
Access Cover

145527870
94038895: RNCC: 3 | RNVC: 2

31 Jan 2007

5340-14-411-7085
Angle Bracket

144117085
4771820280: RNCC: 3 | RNVC: 2

27 Aug 1986

5340-14-376-4576
Loop Clamp

143764576
16379969: RNCC: 3 | RNVC: 2
16379969: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-359-0747
Anchor Strap

143590747
A11A221160640: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-425-1021
Access Cover

144251021
0850026E00: RNCC: 3 | RNVC: 2

21 Jun 1988

5340-14-404-6586
Retaining Strap

144046586
5171614700: RNCC: 3 | RNVC: 2
716147: RNCC: 5 | RNVC: 2

20 Nov 1985

5340-14-042-4727
Retaining Strap

140424727
16204673: RNCC: 3 | RNVC: 2
16204673: RNCC: 5 | RNVC: 2
16204673: RNCC: 5 | RNVC: 9

19 Jan 1978

5340-14-544-6231
Mounting Bracket

145446231
072953987000000: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-14-344-5971
Mending Plate

143445971
BA3331: RNCC: 3 | RNVC: 2
193968: RNCC: 5 | RNVC: 2
222501: RNCC: 5 | RNVC: 2
BA3331C: RNCC: 5 | RNVC: 2

9 Sep 1977

5340-14-522-7193
Synchro Clamp

145227193
769996: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-14-511-7765
Loop Clamp

145117765
51213106022: RNCC: 3 | RNVC: 2
5000603081: RNCC: 5 | RNVC: 2
5000603081: RNCC: 5 | RNVC: 9

18 Jan 1999

5340-14-454-8817
Mounting Bracket

144548817
5000719335: RNCC: 3 | RNVC: 2

24 Apr 1992

5340-14-540-6833
Mounting Plate

145406833
38051577: RNCC: 3 | RNVC: 2
ND065406: RNCC: 5 | RNVC: 2
4848ZG8613180590: RNCC: 6 | RNVC: 9

20 Apr 2004

5340-14-410-6289
Retaining Strap

144106289
404213: RNCC: 3 | RNVC: 2
BGE404213: RNCC: 5 | RNVC: 2

9 Jul 1986

5340-14-382-3834
Runner

143823834
BAZ94622: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-540-5340
Bumper

145405340
19221783: RNCC: 3 | RNVC: 2

1 Apr 2004

5340-14-482-7874
Mounting Plate

144827874
1100938C00: RNCC: 3 | RNVC: 2

25 Jul 1996

5340-14-552-1678
Locking Stay

145521678
8911881083: RNCC: 3 | RNVC: 2

29 Nov 2006

5340-14-511-9867
Mounting Plate

145119867
7700573091: RNCC: 3 | RNVC: 2
0061453: RNCC: 3 | RNVC: 2

2 Feb 1999

5340-14-466-3034
Mounting Bracket

144663034
C67707: RNCC: 3 | RNVC: 2

3 Nov 1993

5340-14-478-3844
Loop Clamp

144783844
800528: RNCC: 3 | RNVC: 2

25 Oct 1995

5340-14-454-6078
Retaining Strap

144546078
0120770008: RNCC: 3 | RNVC: 2
0120770008: RNCC: 5 | RNVC: 2

8 Apr 1992

5340-14-308-8534
Angle Bracket

143088534
26253240: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-450-9385
Loop Clamp

144509385
9136221112: RNCC: 3 | RNVC: 2

23 Oct 1991

5340-14-504-6829
Mounting Plate

145046829
PAM190CO003: RNCC: 3 | RNVC: 2

27 Feb 1998

5340-14-460-6405
Mounting Bracket

144606405
5630008D00: RNCC: 3 | RNVC: 2
5630008D00: RNCC: 5 | RNVC: 9

4 Feb 1993

5340-14-547-5301
Angle Bracket

145475301
RA1B703199111N1: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-546-2161
Mounting Plate

145462161
MLL242010106: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-483-8031
Clamping Catch

144838031
8002056W00: RNCC: 1 | RNVC: 2
1BM109533021: RNCC: 3 | RNVC: 2

3 Oct 1996

5340-14-546-7678
Angle Bracket

145467678
RA1M705646141: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-14-436-6880
Retaining Strap

144366880
DA3C316114740: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-314-1148
Retaining Strap

143141148
445880: RNCC: 3 | RNVC: 2
20445880-3: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-425-8915
Retaining Strap

144258915
093203F01TRA: RNCC: 3 | RNVC: 2
093203F: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-14-547-9221
Bumper

145479221
562252: RNCC: 3 | RNVC: 2

25 Nov 2005

5340-14-400-0893
Casement Fastener

144000893
214613: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-511-0486
Runner

145110486
96191266: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-14-523-2403
Retaining Strap

145232403
RA1M701116251N1: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-546-7623
Angle Bracket

145467623
RA1M704225261N1: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-14-418-9164
Retaining Strap

144189164
DA1D794246001: RNCC: 3 | RNVC: 2

16 Sep 1987

5340-14-404-5537
Mounting Plate

144045537
006119080P: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-357-2353
Retaining Strap

143572353
19294876: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-041-9519
Angle Bracket

140419519
0260141050: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-569-4253
Utility Guard Rail Section

145694253
PC3227: RNCC: 3 | RNVC: 2
1KP511: RNCC: 5 | RNVC: 2
1KP511: RNCC: 5 | RNVC: 2

14 Sep 2011

5340-14-524-0855
Mounting Plate

145240855
123507: RNCC: 3 | RNVC: 9

26 Feb 2001

5340-14-478-7017
Mounting Plate

144787017
1070150R00: RNCC: 3 | RNVC: 2

17 Nov 1995

5340-14-549-9649
Mounting Plate

145499649
2092517: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-335-3558
Lock-Release Lever

143353558
197385: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-457-1842
Mounting Plate

144571842
39467525: RNCC: 3 | RNVC: 2
39467525: RNCC: 5 | RNVC: 9

13 Aug 1992

5340-14-435-7854
Rim Latch

144357854
16045419: RNCC: 3 | RNVC: 2

22 Nov 1989

5340-14-502-6253
Plug Button

145026253
7703073027: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-549-8315
Angle Bracket

145498315
2092579: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-545-0089
Bumper

145450089
180034: RNCC: 3 | RNVC: 2

14 Mar 2005

5340-14-447-0260
Mounting Bracket

144470260
50004277: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-14-478-0759
Rigid Caster

144780759
M418610A9276A01: RNCC: 3 | RNVC: 2

11 Oct 1995

5340-14-041-5570
Retaining Strap

140415570
952813: RNCC: 3 | RNVC: 2
952813: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-550-8155
Mounting Plate

145508155
778190: RNCC: 3 | RNVC: 2

18 Jul 2006

5340-14-270-8631
Retaining Strap

142708631
H90Z2522: RNCC: 3 | RNVC: 2
530894: RNCC: 5 | RNVC: 2

4 May 1983

5340-14-316-2509
Retaining Strap

143162509
107917: RNCC: 3 | RNVC: 2
107917: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-385-9088
Rim Latch

143859088
143846: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-355-5221
Retaining Strap

143555221
702503: RNCC: 3 | RNVC: 2
P702503: RNCC: 5 | RNVC: 9

19 Mar 1979

5340-14-514-3414
Lock-Release Lever

145143414
461441: RNCC: 3 | RNVC: 2

12 May 1999

5340-14-371-4148
Angle Bracket

143714148
26255479: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-535-9863
Mounting Bracket

145359863
S4935F01: RNCC: 3 | RNVC: 2

2 Jul 2003

5340-14-394-9262
Mounting Plate

143949262
29665039: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-480-3863
Mounting Bracket

144803863
35 51 32: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-503-7175
Mounting Bracket

145037175
01241400: RNCC: 3 | RNVC: 2

28 Jan 1998

5340-14-473-6701
Mounting Plate

144736701
332A67-1843-61: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-518-9679
Mounting Bracket

145189679
646500: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-517-9048
Mounting Bracket

145179048
206935: RNCC: 3 | RNVC: 2

17 Jan 2000

5340-14-554-3265
Access Cover

145543265
82363741000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-381-2471
Retaining Strap

143812471
71088: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-464-4275
Pipe Hanger

144644275
121S52-436-00-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-394-8316
Retaining Band

143948316
M4EW1301711602: RNCC: 3 | RNVC: 2

2 Oct 1984

Load More Results