What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 156 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 156 of 446

5340-14-515-2838
Angle Bracket

145152838
0420 3686: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-307-5730
Buckle

143075730
RAPC0200BCPARKERISE: RNCC: 3 | RNVC: 2
BAZ1684: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-524-5181
Cover Strip

145245181
06S0111408: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-409-0764
Hook Handle

144090764
4771621730: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-484-6591
Access Cover

144846591
29404281: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-422-4155
Rod End Clevis

144224155
639161008: RNCC: 3 | RNVC: 2
89174130: RNCC: 5 | RNVC: 2
639161008: RNCC: 5 | RNVC: 9

3 Mar 1988

5340-14-422-7344
Access Cover

144227344
336017: RNCC: 3 | RNVC: 2
336017: RNCC: 5 | RNVC: 9

17 Mar 1988

5340-14-470-4778
Access Cover

144704778
267-298770: RNCC: 3 | RNVC: 2

22 Jun 1994

5340-14-544-0855
Access Cover

145440855
3522 353 04882: RNCC: 3 | RNVC: 2
89526460: RNCC: 5 | RNVC: 2

3 Jan 2005

5340-14-437-8858
Metal Grille

144378858
1006115: RNCC: 3 | RNVC: 2
1006115: RNCC: 5 | RNVC: 2

21 Feb 1990

5340-14-478-2462
Angle Bracket

144782462
104720R01TRA: RNCC: 3 | RNVC: 2
104720R: RNCC: 5 | RNVC: 2

18 Oct 1995

5340-14-293-9315
Pipe Hanger

142939315
53963-5: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-477-7407
Mounting Plate

144777407
1087623G00: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-14-454-2780
Quick Release Pin

144542780
625S6L9: RNCC: 3 | RNVC: 2

26 Mar 1992

5340-14-451-5090
Corner Brace

144515090
38801: RNCC: 3 | RNVC: 2

21 Nov 1991

5340-14-457-6616
Webbing Strap

144576616
B4000-CAT5-LG15M: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-356-9954
Webbing Strap

143569954
ICMS172: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-382-6648
Loop Clamp

143826648
8150001600: RNCC: 3 | RNVC: 2
815N16: RNCC: 5 | RNVC: 2

17 Feb 1983

5340-14-506-7382
Mounting Bracket

145067382
BB4269: RNCC: 3 | RNVC: 2

13 May 1998

5340-14-245-3386
Loop Clamp

142453386
79001264: RNCC: 3 | RNVC: 2
79001264: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-539-7700
Mounting Bracket

145397700
372260F: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-14-401-6554
Mounting Plate

144016554
0BEB06-656523W: RNCC: 3 | RNVC: 2
0656523W00: RNCC: 5 | RNVC: 2

13 Jun 1985

5340-14-349-3584
Padlock

143493584
02062301: RNCC: 3 | RNVC: 2
CITY55: RNCC: 5 | RNVC: 2

22 May 1978

5340-14-451-5155
Mounting Plate

144515155
532321: RNCC: 3 | RNVC: 2

21 Nov 1991

5340-14-366-3771
Angle Bracket

143663771
16387859: RNCC: 3 | RNVC: 2
16387859: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-466-5248
Mounting Plate

144665248
5220223: RNCC: 3 | RNVC: 2

15 Nov 1993

5340-14-505-7140
Loop Clamp

145057140
062-110021: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-383-9854
Loop Clamp

143839854
532496: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-518-1261
Mounting Plate

145181261
5000736599: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-226-5154
Retaining Strap

142265154
0000465513: RNCC: 3 | RNVC: 2
0000465513: RNCC: 5 | RNVC: 9
465513: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-539-7347
Access Cover

145397347
F1286425: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-14-315-3648
Angle Bracket

143153648
121S63-357-50-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-518-2460
Access Cover

145182460
5000821838: RNCC: 3 | RNVC: 2

28 Jan 2000

5340-14-437-2867
Rod End Clevis

144372867
8519000: RNCC: 3 | RNVC: 2
20325672: RNCC: 5 | RNVC: 2
8519000: RNCC: 5 | RNVC: 9

24 Jan 1990

5340-14-483-2709
Access Cover

144832709
1GM000118: RNCC: 3 | RNVC: 2
91399715: RNCC: 5 | RNVC: 2
1MC800164: RNCC: 5 | RNVC: 2
1GM000118: RNCC: 5 | RNVC: 9

29 Aug 1996

5340-14-526-1284
Access Cover

145261284
L77614: RNCC: 3 | RNVC: 2

4 Jul 2001

5340-14-505-6603
Mounting Bracket

145056603
D28003000004: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-455-9582
Synchro Clamp

144559582
PM1A762712113A1: RNCC: 3 | RNVC: 2
PM1A762712113A1: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-422-7794
Webbing Strap

144227794
96162569: RNCC: 3 | RNVC: 2
96162569: RNCC: 5 | RNVC: 9

17 Mar 1988

5340-14-331-3433
Protection Bellows

143313433
43456: RNCC: 3 | RNVC: 2
91329344: RNCC: 3 | RNVC: 2
178-7455: RNCC: 5 | RNVC: 2
91329344: RNCC: 5 | RNVC: 9
SL43456: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-527-9429
Cover Strip

145279429
FA1R704-468: RNCC: 3 | RNVC: 2

3 Dec 2001

5340-14-330-2451
Angle Bracket

143302451
321A71-0130-32: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-558-0320
Utility Resilient Mount

145580320
CB1380-15-IM2: RNCC: 3 | RNVC: 2

22 Aug 2008

5340-14-408-6576
Rod End Clevis

144086576
160G742055-01: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-308-4047
Loop Clamp

143084047
E4P701-55-910: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-447-7499
Access Cover

144477499
J05791-03-1000P008: RNCC: 3 | RNVC: 2

29 May 1991

5340-14-489-2992
Webbing Strap

144892992
N1995043-1: RNCC: 3 | RNVC: 2
F300 0T 015 7563: RNCC: 6 | RNVC: 9
F300 0T 015 0172: RNCC: 6 | RNVC: 9

9 Jul 1997

5340-14-454-6946
Mounting Plate

144546946
2085-02-040: RNCC: 3 | RNVC: 2
89411602: RNCC: 5 | RNVC: 9

9 Apr 1992

5340-14-508-6621
Mounting Plate

145086621
JGA05: RNCC: 3 | RNVC: 2

23 Sep 1998

5340-14-460-8407
Angle Bracket

144608407
45057980: RNCC: 3 | RNVC: 2
45057980: RNCC: 5 | RNVC: 9

10 Feb 1993

5340-14-261-0966
Rod End Connector

142610966
109186: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-282-6175
Bumper

142826175
121E26-302-16-0: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-453-8813
Retaining Strap

144538813
565690: RNCC: 3 | RNVC: 2

12 Mar 1992

5340-14-210-6497
Loop Clamp

142106497
0603518300: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-528-3767
Mounting Plate

145283767
27119903-9: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-14-369-9467
Angle Bracket

143699467
398102030012: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-545-7391
Access Cover

145457391
L75Z1A1Z0H60100: RNCC: 3 | RNVC: 2

4 May 2005

5340-14-353-0445
Rod End Clevis

143530445
A11A572002621: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-533-6166
Access Cover

145336166
3450000014: RNCC: 3 | RNVC: 2
5010260159: RNCC: 5 | RNVC: 2

12 Feb 2003

5340-14-530-2415
Access Cover

145302415
TB1010127E: RNCC: 3 | RNVC: 2

22 May 2002

5340-14-521-6248
Access Cover

145216248
46324241: RNCC: 3 | RNVC: 2
46324241: RNCC: 5 | RNVC: 9

30 Aug 2000

5340-14-328-0674
Anchor Strap

143280674
000MA0427F4REPAH49L14: RNCC: 3 | RNVC: 2
000MA427F32REPAH49L14: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-409-0492
Anchor Strap

144090492
3118571: RNCC: 3 | RNVC: 2
3118571: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-202-8288
Access Cover

142028288
0000123861: RNCC: 3 | RNVC: 2
0000123861: RNCC: 5 | RNVC: 9
123861: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-14-389-9921
Pipe Hanger

143899921
0000153499: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-502-8807
Plug Button

145028807
9Y5015: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-526-0110
Butt Hinge

145260110
604540CBICHC: RNCC: 3 | RNVC: 2
SYB3326: RNCC: 5 | RNVC: 2

27 Jun 2001

5340-14-502-6170
Loop Clamp

145026170
5010266557: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-320-6085
Retaining Strap

143206085
170463: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-543-3163
Mounting Bracket

145433163
9105220P091: RNCC: 3 | RNVC: 2

20 Oct 2004

5340-14-485-9766
Mounting Bracket

144859766
575772: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-509-6507
Cover Strip

145096507
RA1M116090031N1: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-435-0035
Retaining Strap

144350035
ST406M52P529: RNCC: 3 | RNVC: 2

11 Oct 1989

5340-14-421-0382
Access Cover

144210382
5100112617: RNCC: 3 | RNVC: 2

6 Jan 1988

5340-14-519-7778
Access Cover

145197778
49701355: RNCC: 3 | RNVC: 2
47400020: RNCC: 5 | RNVC: 2
GD2100332: RNCC: 5 | RNVC: 2

5 Apr 2000

5340-14-501-9581
Angle Bracket

145019581
332A54-1182-00: RNCC: 3 | RNVC: 2

19 Nov 1997

5340-14-257-2281
Cover Strip

142572281
330A25-2202-34: RNCC: 3 | RNVC: 2
330A25-2202-3400: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-347-4723
Mounting Bracket

143474723
0294307740: RNCC: 3 | RNVC: 2
302-262-701U: RNCC: 5 | RNVC: 2

1 Mar 1978

5340-14-312-9100
Mending Plate

143129100
1872BA02-02: RNCC: 3 | RNVC: 2
1872BA02-02: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-543-0290
Mounting Plate

145430290
EA5M702-32-830: RNCC: 3 | RNVC: 2

18 Aug 2004

5340-14-315-0344
Mounting Plate

143150344
NO PRIMARY REF14-315-0344: RNCC: 3 | RNVC: 2
64H0010DET32: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-519-0986
Mounting Bracket

145190986
139E358-01: RNCC: 3 | RNVC: 2
139E358-01: RNCC: 5 | RNVC: 9

7 Mar 2000

5340-14-501-1457
Mounting Plate

145011457
014-003-029: RNCC: 3 | RNVC: 2
014.003.029: RNCC: 3 | RNVC: 2
F300 0T 025 1859: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-370-7966
Anchor Strap

143707966
699-94073-50L9: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-540-9560
Access Cover

145409560
2188804-001: RNCC: 3 | RNVC: 2
8194887-001: RNCC: 5 | RNVC: 2

5 May 2004

5340-14-474-2179
Mounting Bracket

144742179
312-01667-002: RNCC: 3 | RNVC: 2

1 Feb 1995

5340-14-533-5401
Butt Hinge

145335401
192E522-00: RNCC: 3 | RNVC: 2

10 Feb 2003

5340-14-503-2614
Angle Bracket

145032614
332P87-0026-7101: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-394-7234
Rim Lock Set

143947234
NO PRIMARY REF14-394-7234: RNCC: 3 | RNVC: 2
6600-04FE019: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-505-3317
Butt Hinge

145053317
SN3CHA0200: RNCC: 3 | RNVC: 2
E6-10-101-20: RNCC: 3 | RNVC: 2
F300 0T 023 7555: RNCC: 6 | RNVC: 9

18 Mar 1998

5340-14-325-5373
Access Cover

143255373
P00521-54: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-472-7605
Plug Button

144727605
332A72-1651-01: RNCC: 3 | RNVC: 2

9 Nov 1994

5340-14-269-4357
Rim Lock

142694357
NO PRIMARY REF14-269-4357: RNCC: 3 | RNVC: 2
234BT38F0UGA: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-532-6516
Runner

145326516
MAT291-0474F2: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-14-311-2024
Handwheel

143112024
GSM137-036-F1-REP2: RNCC: 3 | RNVC: 2
000MA060F6-5C1ETF24: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-504-0760
Mounting Plate

145040760
MB1040F00: RNCC: 3 | RNVC: 2

5 Feb 1998

5340-14-415-4867
Butt Hinge

144154867
183333: RNCC: 3 | RNVC: 2

18 May 1987

5340-14-320-1452
Access Cover

143201452
106-12-104: RNCC: 3 | RNVC: 2
106-12-104: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-441-0461
Pipe Hanger

144410461
17620: RNCC: 3 | RNVC: 2
85-693-6460: RNCC: 6 | RNVC: 9

16 Aug 1990

5340-14-372-9340
Runner

143729340
NO PRIMARY REF14-372-9340: RNCC: 3 | RNVC: 2
223152: RNCC: 5 | RNVC: 9

21 Sep 1981

5340-14-523-2831
Pipe Hanger

145232831
RA1M701396007: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-526-5352
Mounting Plate

145265352
RA1M704764541: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-546-1886
Mounting Bracket

145461886
RA1A703156111: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-455-9305
Angle Bracket

144559305
PM1A727214431A1: RNCC: 3 | RNVC: 2
PM1A727214431A1: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-547-7196
Mounting Bracket

145477196
100 765 47: RNCC: 3 | RNVC: 2
AA018070: RNCC: 6 | RNVC: 9

7 Nov 2005

5340-14-358-3890
Angle Bracket

143583890
388447: RNCC: 3 | RNVC: 2

13 Aug 1979

5340-14-433-9089
Control Rod

144339089
A1H8444-11: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-14-455-9490
Cover Strip

144559490
PM1A761151006: RNCC: 3 | RNVC: 2
PM1A761151006: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-404-7498
Angle Bracket

144047498
29736867: RNCC: 3 | RNVC: 2
29736867: RNCC: 5 | RNVC: 9

20 Nov 1985

5340-14-448-0576
Door Button

144480576
PM1A239281008: RNCC: 3 | RNVC: 2
PM1A239281008: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-551-7611
Mounting Bracket

145517611
RA1A702726035: RNCC: 3 | RNVC: 2

20 Oct 2006

5340-14-510-8399
Mounting Bracket

145108399
10427317: RNCC: 3 | RNVC: 2

18 Nov 1998

5340-14-527-7435
Runner

145277435
705112: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-14-512-1045
Access Cover

145121045
ADP251100110A1: RNCC: 3 | RNVC: 2

3 Feb 1999

5340-14-486-3607
Access Cover

144863607
350830M: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-545-5468
Leakproof Seal Plug

145455468
SBE2082-040: RNCC: 3 | RNVC: 2

19 Apr 2005

5340-14-320-6902
Angle Bracket

143206902
121E21-710-64-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-335-6309
Access Cover

143356309
PA359-126M151P22A: RNCC: 3 | RNVC: 9

30 Jun 1976

5340-14-495-2182
Access Cover

144952182
NO PRIMARY REF14-495-2182: RNCC: 3 | RNVC: 2
00763940: RNCC: 5 | RNVC: 9
F300 0T 018 6562: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-526-4724
Pipe Hanger

145264724
78731-032-050: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-499-4696
Mounting Bracket

144994696
25618831: RNCC: 3 | RNVC: 2
2-561883-1: RNCC: 5 | RNVC: 2
F300 0T 022 7532: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-449-7907
Belt-Strap Keeper

144497907
06503: RNCC: 3 | RNVC: 2
1 36 06503 XX: RNCC: 5 | RNVC: 2

11 Sep 1991

5340-14-438-2577
Loop Clamp

144382577
LBG316-16PP: RNCC: 3 | RNVC: 2

12 Mar 1990

5340-14-409-8116
Mounting Plate

144098116
M334-01-10-38-11: RNCC: 3 | RNVC: 2
424-91005-002: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-488-4170
Mounting Plate

144884170
53671-4: RNCC: 3 | RNVC: 2

7 May 1997

5340-14-324-4729
Rod End Clevis

143244729
262-50-55720-01: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-252-9422
Retaining Strap

142529422
NO PRIMARY REF14-252-9422: RNCC: 3 | RNVC: 2
PN38: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-393-7901
Loop Clamp

143937901
SS3600-26-70: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-466-6976
Corner Brace

144666976
820437-37: RNCC: 3 | RNVC: 2

24 Nov 1993

5340-14-238-3393
Mending Plate

142383393
NO PRIMARY REF14-238-3393: RNCC: 3 | RNVC: 2
141661: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-489-0465
Mounting Bracket

144890465
330A68-1713-00: RNCC: 3 | RNVC: 2
F300 0T 023 6246: RNCC: 6 | RNVC: 9

18 Jun 1997

5340-14-403-4486
Rigid Caster

144034486
NO PRIMARY REF14-403-4486: RNCC: 3 | RNVC: 2
P4H016835-00: RNCC: 5 | RNVC: 9

21 Aug 1985

5340-14-339-4069
Loop Clamp

143394069
M3E700-30-930: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-376-0195
Plug Button

143760195
366A21-1171-21: RNCC: 3 | RNVC: 2

30 Mar 1982

5340-14-546-4123
Loop Clamp

145464123
21429046-00: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-14-245-0107
Loop Clamp

142450107
NT46-01MARS54C0LLIERINFERIEUR: RNCC: 2 | RNVC: 2
NO PRIMARY REF14-245-0107: RNCC: 3 | RNVC: 2
NT46-01MARS54C0LLIERINFERIEUR: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-467-2067
Mounting Bracket

144672067
350A08-2895-36: RNCC: 3 | RNVC: 2
350A08289536: RNCC: 5 | RNVC: 2

21 Dec 1993

5340-14-470-7168
Mounting Bracket

144707168
365A55-3005-BA: RNCC: 3 | RNVC: 2

29 Jun 1994

5340-14-349-9134
Angle Bracket

143499134
6511-04012: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-356-7979
Butt Hinge

143567979
EA1M110-50-882: RNCC: 3 | RNVC: 2

15 May 1979

5340-14-473-8178
Mounting Bracket

144738178
332A24-0870-21: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-535-4299
Angle Bracket

145354299
52952129: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-354-7872
Access Cover

143547872
69106: RNCC: 3 | RNVC: 2
69106: RNCC: 3 | RNVC: 9

20 Feb 1979

5340-14-448-7390
Plug Button

144487390
220341: RNCC: 3 | RNVC: 2
220341: RNCC: 5 | RNVC: 2
220341: RNCC: 5 | RNVC: 9
220341: RNCC: 5 | RNVC: 9

9 Jul 1991

5340-14-468-3860
Access Cover

144683860
554464: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-14-398-8945
Access Cover

143988945
573910040: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-512-9064
Access Cover

145129064
561481: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-382-8999
Clamping Catch

143828999
GE04IB: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-553-1026
Retaining Strap

145531026
MR20860670052: RNCC: 3 | RNVC: 2

1 Mar 2007

5340-14-382-9793
Anchor Strap

143829793
237321: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-521-8769
Access Cover

145218769
DLT016381: RNCC: 3 | RNVC: 2

20 Sep 2000

5340-14-312-1098
Access Cover

143121098
172990: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-533-6198
Access Cover

145336198
C116211A: RNCC: 3 | RNVC: 2

12 Feb 2003

5340-14-506-0118
Access Cover

145060118
P604872: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-14-534-2855
Utility Access Door

145342855
10647506: RNCC: 3 | RNVC: 2

19 Mar 2003

5340-14-031-5595
Access Cover

140315595
9896: RNCC: 3 | RNVC: 2
9896: RNCC: 5 | RNVC: 9
9896: RNCC: 5 | RNVC: 9

14 Jun 1980

5340-14-502-8514
Access Cover

145028514
9R7814: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-526-0765
Arched Cushion

145260765
MAT169-0024F13FORTERAIDEUR: RNCC: 3 | RNVC: 2
E1M371330: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-14-411-2507
Loop Clamp

144112507
ASNA0022-75N08: RNCC: 1 | RNVC: 2
ASNA0022-75N08: RNCC: 3 | RNVC: 2
61100005008: RNCC: 3 | RNVC: 2
A0022-75N08: RNCC: 5 | RNVC: 2
75N08: RNCC: 5 | RNVC: 2
ASNA0022-75N08: RNCC: 5 | RNVC: 2
A0022-75N08: RNCC: 5 | RNVC: 2

6 Aug 1986

5340-14-455-3182
Cover Strip

144553182
365A87-3031-JT: RNCC: 3 | RNVC: 2

21 May 1992

5340-14-326-6737
Loop Clamp

143266737
51111905034: RNCC: 3 | RNVC: 2
25P34: RNCC: 5 | RNVC: 2
85-800-4351: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-512-0307
Loop Clamp

145120307
80-100-12-71: RNCC: 3 | RNVC: 2
0005522: RNCC: 3 | RNVC: 2

3 Feb 1999

5340-14-455-1303
Mounting Bracket

144551303
ST159-2M664P238: RNCC: 3 | RNVC: 2
4201246P080: RNCC: 5 | RNVC: 2

1 May 1992

5340-14-449-9116
Detent Plunger

144499116
A03037-10-4052P005: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-14-440-3224
Butt Hinge

144403224
332A63-1634-60: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-485-0722
Mounting Bracket

144850722
332A54-1048-01: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-14-466-1268
Mounting Bracket

144661268
JVBT222-02-03: RNCC: 3 | RNVC: 2
00123644W: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-503-2871
Mounting Bracket

145032871
332ARE-3309-60: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-535-6605
Mounting Plate

145356605
1926-600-001B: RNCC: 3 | RNVC: 2

13 Jun 2003

5340-14-260-0686
Mounting Bracket

142600686
321A59-9700-20: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-358-6113
Loop Clamp

143586113
160-792033-04: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-498-3157
Loop Clamp

144983157
91952645: RNCC: 3 | RNVC: 2
PAA73-10-010-03: RNCC: 3 | RNVC: 2
F300 0T 004 7822: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-465-0002
Angle Bracket

144650002
365P63-1221-20: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-217-8594
Block Clamp

142178594
3160S76-20-121: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-468-1676
Angle Bracket

144681676
78703-20-055: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-362-4104
Bumper

143624104
4111-15: RNCC: 3 | RNVC: 2
BAZM00253: RNCC: 5 | RNVC: 2
536789: RNCC: 5 | RNVC: 2

19 Mar 1980

5340-14-204-0965
Loop Clamp

142040965
3130S95-00-753: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-437-4512
Mounting Bracket

144374512
332A61-2336-08: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-218-7509
Leaf Spring

142187509
L921-89A: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-495-4383
Loop Clamp

144954383
P30369-56: RNCC: 3 | RNVC: 2
P790303: RNCC: 3 | RNVC: 2
F300 0T 019 2636: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-443-3276
Mounting Plate

144433276
6804G32-2145-02: RNCC: 3 | RNVC: 2

14 Nov 1990

5340-14-530-7400
Mounting Bracket

145307400
727196-003: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-549-8953
Runner

145498953
41105933-004: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-483-9033
Metal Grille

144839033
MAT853-0149F11REP5: RNCC: 3 | RNVC: 2
HDF55X55RAL9010: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-14-405-5279
Access Cover

144055279
3511 130 88971: RNCC: 3 | RNVC: 2
3511-130-88971: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-411-2157
Butt Hinge

144112157
110-2724-05-03: RNCC: 3 | RNVC: 2
85-693-1881: RNCC: 6 | RNVC: 9

6 Aug 1986

5340-14-465-4809
Blank Panel

144654809
365A21-3122-0551: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-399-0214
Retaining Strap

143990214
NO PRIMARY REF14-399-0214: RNCC: 3 | RNVC: 2
45416: RNCC: 5 | RNVC: 9
D10-45416: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-319-0150
Bridge Clamp

143190150
0RC5-20-03: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-439-8271
Angle Bracket

144398271
332A55-2056-21: RNCC: 3 | RNVC: 2

23 May 1990

5340-14-201-6060
Loop Clamp

142016060
51213105051: RNCC: 3 | RNVC: 2
A0021-20G51: RNCC: 5 | RNVC: 2
20G51: RNCC: 5 | RNVC: 2

1 Jan 1962

5340-14-473-1920
Mounting Bracket

144731920
F7987 5090-91: RNCC: 3 | RNVC: 9

7 Dec 1994

5340-14-379-5714
Slide Keeper

143795714
4100: RNCC: 3 | RNVC: 2
954040: RNCC: 5 | RNVC: 2
85-691-8654: RNCC: 6 | RNVC: 9

1 Oct 1982

5340-14-532-0679
Mounting Bracket

145320679
03-725-317: RNCC: 3 | RNVC: 2
SZ03.725.317: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-537-3320
Mounting Plate

145373320
915-904: RNCC: 3 | RNVC: 2

20 Oct 2003

5340-14-254-2306
Retaining Strap

142542306
V00260-32: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-296-3701
Retaining Strap

142963701
CAP10-70-01-11: RNCC: 3 | RNVC: 9

1 Jan 1973

5340-14-407-0231
Clamping Catch

144070231
GE.41-FZB: RNCC: 3 | RNVC: 2
GE41FZB: RNCC: 5 | RNVC: 2

29 Jan 1986

5340-14-453-6494
Metal Grille

144536494
360-81-208: RNCC: 3 | RNVC: 9
89138433: RNCC: 5 | RNVC: 2

4 Mar 1992

5340-14-462-3815
Retaining Strap

144623815
1089-131: RNCC: 3 | RNVC: 2
89472776: RNCC: 5 | RNVC: 2
PAD1089-131: RNCC: 5 | RNVC: 9

15 Apr 1993

5340-14-460-8282
Anchor Strap

144608282
6223-23: RNCC: 3 | RNVC: 2
9252787880: RNCC: 5 | RNVC: 2

10 Feb 1993

5340-14-531-0203
Mounting Bracket

145310203
121-501-10-81: RNCC: 3 | RNVC: 2

22 Jul 2002

5340-14-214-7473
Loop Clamp

142147473
AA7-62NF1-1161: RNCC: 3 | RNVC: 2
AA52-161: RNCC: 5 | RNVC: 2
AA52-1161: RNCC: 5 | RNVC: 9
AA52-161: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-327-3352
Plug Button

143273352
F10A372004A2: RNCC: 3 | RNVC: 2
85-688-5767: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-216-7962
Access Cover

142167962
NO PRIMARY REF14-216-7962: RNCC: 3 | RNVC: 2
291M520572: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-305-0776
Access Cover

143050776
3511 180 22561: RNCC: 3 | RNVC: 2
3511-180-22561: RNCC: 5 | RNVC: 2
3511 180 22561: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-388-7846
Loop Clamp

143887846
G10369-15: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-523-8988
Mounting Bracket

145238988
350A32-3078-20: RNCC: 3 | RNVC: 2

8 Feb 2001

5340-14-358-2605
Clamping Catch

143582605
3511-131-28651: RNCC: 3 | RNVC: 2
3511 131 28651: RNCC: 5 | RNVC: 2

13 Aug 1979

5340-14-368-4228
Bumper

143684228
262-51-65435-08: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-14-489-3943
Mounting Bracket

144893943
M20H5530172-43: RNCC: 3 | RNVC: 2

16 Jul 1997

5340-14-442-5953
Mortise Lock Set

144425953
H116182: RNCC: 3 | RNVC: 2

22 Oct 1990

5340-14-443-3452
Synchro Clamp

144433452
1334T03-10: RNCC: 3 | RNVC: 2
76168: RNCC: 5 | RNVC: 2
1334T03-10: RNCC: 5 | RNVC: 9

19 Nov 1990

5340-14-457-8833
Pawl Fastener

144578833
02864615D6A: RNCC: 3 | RNVC: 2

24 Sep 1992

5340-14-409-0884
Plug Button

144090884
23603274-4: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-501-3257
Angle Bracket

145013257
704-121423-921-0: RNCC: 3 | RNVC: 2

29 Oct 1997

5340-14-436-4840
Quick Release Pin

144364840
01BP15-035: RNCC: 3 | RNVC: 9

3 Jan 1990

5340-14-484-0975
Loop Clamp

144840975
FUV: RNCC: 3 | RNVC: 2
COLLIER F.U.V: RNCC: 5 | RNVC: 9

24 Oct 1996

5340-14-447-1189
Mounting Plate

144471189
21308675-01: RNCC: 3 | RNVC: 2
21320124-4: RNCC: 5 | RNVC: 2

3 May 1991

5340-14-249-8317
Loop Clamp

142498317
AD115-04T01-16: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-501-4517
Angle Bracket

145014517
307-839-405-0: RNCC: 3 | RNVC: 2
307-839-403-0: RNCC: 5 | RNVC: 2

29 Oct 1997

5340-14-268-9893
Handwheel

142689893
MAT137-003F9ACIER: RNCC: 3 | RNVC: 2
553-000MA060F5-7N1: RNCC: 5 | RNVC: 2
GSM137-007F21ACIER: RNCC: 5 | RNVC: 2
GSM137-07F21ACIER: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-423-4613
Webbing Strap

144234613
4567-20NOIRE: RNCC: 3 | RNVC: 2
758202: RNCC: 5 | RNVC: 2

20 Apr 1988

5340-14-444-8113
Access Cover

144448113
56205-253-1: RNCC: 3 | RNVC: 9

22 Jan 1991

5340-14-529-9449
Lock Bolt

145299449
T-MCL2T: RNCC: 3 | RNVC: 2
SYQ2355: RNCC: 5 | RNVC: 2

24 Apr 2002

5340-14-261-2241
Retaining Strap

142612241
175-52-145: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-516-0675
Mounting Bracket

145160675
10360263: RNCC: 3 | RNVC: 2
IF-192-2229: RNCC: 5 | RNVC: 9

8 Sep 1999

5340-14-315-7448
Mending Plate

143157448
319A24-10-045: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-514-4715
Angle Bracket

145144715
10363530: RNCC: 3 | RNVC: 2
IF-192-2326: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-447-6895
Rod End Clevis

144476895
11774: RNCC: 3 | RNVC: 2
11774: RNCC: 5 | RNVC: 9
85-694-4005: RNCC: 6 | RNVC: 9

29 May 1991

5340-14-524-7710
Mounting Bracket

145247710
J05107-02-2540P001: RNCC: 3 | RNVC: 2

11 Apr 2001

5340-14-332-1215
Retaining Strap

143321215
413-07285-000: RNCC: 3 | RNVC: 2
413-07285-000: RNCC: 5 | RNVC: 2
413-7285: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-543-2112
Rod End Clevis

145432112
1222512-001: RNCC: 3 | RNVC: 2

31 Aug 2004

5340-14-404-6923
Access Cover

144046923
418-11646-000: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-486-0428
Detent Plunger

144860428
429763: RNCC: 3 | RNVC: 2
429763-001: RNCC: 5 | RNVC: 9

26 Feb 1997

5340-14-337-8822
Access Cover

143378822
C31AC0101-011: RNCC: 3 | RNVC: 2
C31AC0101-011: RNCC: 5 | RNVC: 2
C31AC0101-011: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-14-214-7238
Retaining Strap

142147238
88192: RNCC: 3 | RNVC: 2
18473-09: RNCC: 3 | RNVC: 9

1 Jan 1965

5340-14-488-4089
Access Cover

144884089
101241-49K: RNCC: 3 | RNVC: 2

7 May 1997

5340-14-404-7172
Corner Brace

144047172
20780734: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-381-8620
Mounting Plate

143818620
20204371: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-457-3577
Support Hook

144573577
16661723: RNCC: 3 | RNVC: 2

27 Aug 1992

5340-14-473-1055
Mounting Bracket

144731055
38018322: RNCC: 3 | RNVC: 2
38018322: RNCC: 5 | RNVC: 9

7 Dec 1994

5340-14-350-2861
Retaining Strap

143502861
09516285733: RNCC: 3 | RNVC: 2
96162: RNCC: 5 | RNVC: 2

14 Jun 1978

5340-14-524-2258
Angle Bracket

145242258
165029: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-498-6826
Mending Plate

144986826
5000607253: RNCC: 3 | RNVC: 2
5000607253: RNCC: 5 | RNVC: 9
F300 0T 007 6527: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-424-2965
Rod End Clevis

144242965
A30052030: RNCC: 3 | RNVC: 2
89416084: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-387-5478
Access Cover

143875478
337698: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-14-042-5603
Bumper

140425603
211681: RNCC: 3 | RNVC: 2
FI211681: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-384-3171
Loop Clamp

143843171
28GE16: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-516-0606
Access Cover

145160606
16022583B: RNCC: 3 | RNVC: 2

8 Sep 1999

5340-14-384-4362
Butt Hinge

143844362
5543: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-041-9539
Angle Bracket

140419539
0260603560: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-561-5779
Utility Resilient Mount

145615779
136022: RNCC: 3 | RNVC: 2
621-45SH-M16: RNCC: 5 | RNVC: 2

29 Jul 2009

5340-14-533-8806
Cover Strip

145338806
42-250-173: RNCC: 3 | RNVC: 2
SZ42.250.173: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-447-5256
Tubular Fairlead

144475256
0FMN19-110000-03A1: RNCC: 3 | RNVC: 2
0901984W00: RNCC: 5 | RNVC: 2

28 May 1991

5340-14-433-7542
Loop Clamp

144337542
PB8150/02: RNCC: 3 | RNVC: 2

7 Aug 1989

5340-14-445-9633
Angle Bracket

144459633
TAM101-802: RNCC: 3 | RNVC: 2

27 Feb 1991

5340-14-436-2793
Plug Button

144362793
790-295: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-14-373-2826
Corner Brace

143732826
330A58-1300-212: RNCC: 3 | RNVC: 2

21 Oct 1981

5340-14-366-0151
Angle Bracket

143660151
A20FA0030-055: RNCC: 3 | RNVC: 2
A20FA0030-055: RNCC: 5 | RNVC: 2
A20FA0030-055: RNCC: 5 | RNVC: 9

4 Nov 1980

5340-14-453-4173
Plug Button

144534173
NO PRIMARY REF14-453-4173: RNCC: 3 | RNVC: 2
432078REP1: RNCC: 5 | RNVC: 2

19 Feb 1992

5340-14-483-6996
Rod End Connector

144836996
JVHT260060: RNCC: 3 | RNVC: 2
21957: RNCC: 5 | RNVC: 9
F300 0T 019 0618: RNCC: 6 | RNVC: 9

27 Sep 1996

5340-14-311-0995
Threaded Rod End

143110995
10-003-0044: RNCC: 3 | RNVC: 2
SAF10-003-0044: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-231-0909
Loop Clamp

142310909
203101750: RNCC: 3 | RNVC: 2
20G17-5: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-539-9820
Pipe Hanger

145399820
78733-016-022A: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-539-4312
Loop Clamp

145394312
NO15140-02: RNCC: 3 | RNVC: 2

14 Jan 2004

5340-14-326-3904
Handwheel

143263904
1: RNCC: 3 | RNVC: 9
1: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-533-7235
Mounting Bracket

145337235
302834-0: RNCC: 3 | RNVC: 2

19 Feb 2003

5340-14-520-3140
Bow Handle

145203140
27138346-7: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-440-9648
Mortise Lock Set

144409648
H116181D: RNCC: 3 | RNVC: 2
H116181B: RNCC: 5 | RNVC: 2

9 Aug 1990

5340-14-224-5161
T Plate

142245161
5145A: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-380-2008
Webbing Strap

143802008
CG131-3-1: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-505-0992
Mounting Bracket

145050992
60768-5: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-455-0010
Mounting Bracket

144550010
501-729-733-0: RNCC: 3 | RNVC: 2

1 May 1992

5340-14-534-2714
Mounting Bracket

145342714
61019296AA: RNCC: 3 | RNVC: 2

19 Mar 2003

5340-14-483-1086
T Bracket

144831086
ALZ082055072001: RNCC: 3 | RNVC: 2

8 Aug 1996

5340-14-433-0270
Quick Release Pin

144330270
404252E: RNCC: 3 | RNVC: 2

5 Jul 1989

5340-14-231-3766
Retaining Strap

142313766
2-01629: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-422-1637
Retaining Clip

144221637
5443516: RNCC: 3 | RNVC: 2

24 Feb 1988

5340-14-407-2161
Retaining Strap

144072161
72483: RNCC: 3 | RNVC: 2

12 Feb 1986

5340-14-511-0489
Runner

145110489
96192783: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-14-213-7807
Retaining Strap

142137807
ATTACHEBAS2: RNCC: 3 | RNVC: 2
29990: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-378-9057
Angle Bracket

143789057
5000010173: RNCC: 3 | RNVC: 2
5000010173: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-14-212-7507
Access Cover

142127507
2845-2: RNCC: 3 | RNVC: 2
2845-2: RNCC: 8 | RNVC: 2

1 Jan 1964

5340-14-459-5967
Mounting Plate

144595967
26717015-1: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-538-0237
Recess Handle

145380237
19-7-3688: RNCC: 3 | RNVC: 2

9 Dec 2003

5340-14-304-4220
Loop Clamp

143044220
50011-3-9: RNCC: 3 | RNVC: 2
0400465090: RNCC: 5 | RNVC: 2
9562851020: RNCC: 5 | RNVC: 2
NSA935807C09: RNCC: 5 | RNVC: 2
50011-3-9: RNCC: 5 | RNVC: 9
P50011-3-9: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-342-5112
Flush Catch Claw

143425112
23C3538: RNCC: 3 | RNVC: 2

16 May 1977

5340-14-354-6828
Clamp Bolt Assembly

143546828
S3SD18105-2: RNCC: 3 | RNVC: 2
V3SD18105-2: RNCC: 5 | RNVC: 2
S3SD18105-2: RNCC: 5 | RNVC: 2
V3SD18105-2: RNCC: 5 | RNVC: 2

31 Jan 1979

5340-14-511-2460
Runner

145112460
429705: RNCC: 3 | RNVC: 2
429705-001: RNCC: 5 | RNVC: 9

9 Dec 1998

5340-14-437-4040
Mounting Plate

144374040
NO PRIMARY REF14-437-4040: RNCC: 3 | RNVC: 2
757-00-05: RNCC: 5 | RNVC: 9

31 Jan 1990

5340-14-510-2805
Mounting Bracket

145102805
FC85-007-2: RNCC: 3 | RNVC: 2
1560AA8018477: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-357-3419
Loop Clamp

143573419
220-000-18468: RNCC: 3 | RNVC: 2
613-988-557-0: RNCC: 5 | RNVC: 2
85-691-1671: RNCC: 6 | RNVC: 9

7 Jun 1979

5340-14-511-3964
Threaded Rod End

145113964
SA131-01-02-024: RNCC: 3 | RNVC: 2
SA13-1-01-02-024: RNCC: 5 | RNVC: 2
5340AA1044995: RNCC: 6 | RNVC: 9

16 Dec 1998

5340-14-542-3615
Mounting Plate

145423615
A00-02924-000: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-14-365-8951
Webbing Strap

143658951
16299773: RNCC: 1 | RNVC: 2
044U02-20981P: RNCC: 3 | RNVC: 2
0020981P00: RNCC: 5 | RNVC: 2
16299773: RNCC: 5 | RNVC: 9

4 Nov 1980

5340-14-352-4047
Bumper

143524047
NO PRIMARY REF14-352-4047: RNCC: 3 | RNVC: 2
22639: RNCC: 5 | RNVC: 9
85-688-6519: RNCC: 6 | RNVC: 9

16 Oct 1978

5340-14-469-1092
Access Cover

144691092
BC100A310-042: RNCC: 3 | RNVC: 9
1023574G00: RNCC: 5 | RNVC: 2

6 Apr 1994

5340-14-570-4899
Utility Resilient Mount

145704899
BFD-46: RNCC: 3 | RNVC: 2

20 Dec 2011

5340-14-411-7272
Loop Clamp

144117272
28G9-5: RNCC: 3 | RNVC: 2
HB28G9-5: RNCC: 5 | RNVC: 2
85-801-1576: RNCC: 6 | RNVC: 9

27 Aug 1986

5340-14-478-3436
Anchor Strap

144783436
121E807-00: RNCC: 3 | RNVC: 2
121E807-00: RNCC: 5 | RNVC: 9

25 Oct 1995

5340-14-529-5556
Mounting Plate

145295556
330A58-1340-20: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-465-5008
Mounting Bracket

144655008
365A72-1328-20: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-439-8178
Cover Strip

144398178
330A21-2501-27: RNCC: 3 | RNVC: 2

23 May 1990

5340-14-533-1613
Friction Catch

145331613
Z310-004-000A: RNCC: 3 | RNVC: 2

24 Jan 2003

5340-14-530-0412
Mounting Plate

145300412
5472-04: RNCC: 3 | RNVC: 2
5472-04: RNCC: 3 | RNVC: 9

30 Apr 2002

5340-14-536-5358
Rim Latch

145365358
62-10-35: RNCC: 3 | RNVC: 2

28 Aug 2003

5340-14-378-5312
Rod End Clevis

143785312
304-946-402-0: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-440-4349
Clamp Bolt Assembly

144404349
S3SD18129-02: RNCC: 3 | RNVC: 2
18129-02: RNCC: 3 | RNVC: 2
18129-02: RNCC: 5 | RNVC: 2
S3SD18129-02: RNCC: 5 | RNVC: 2
S3SD18129-2: RNCC: 5 | RNVC: 2
V3SD18129-02: RNCC: 5 | RNVC: 2
V3SD18129-2: RNCC: 5 | RNVC: 2

11 Jul 1990

5340-14-400-8040
Bow Handle

144008040
330A58-3940-0951: RNCC: 3 | RNVC: 2

21 May 1985

5340-14-520-6195
Mending Plate

145206195
C46348-2: RNCC: 3 | RNVC: 2

24 May 2000

5340-14-339-3274
Webbing Strap

143393274
130823: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-325-4967
Mounting Plate

143254967
3160S88-10-023-1: RNCC: 3 | RNVC: 2
85-800-3311: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-338-8786
Retaining Strap

143388786
AZ182U08: RNCC: 3 | RNVC: 2
0400420020: RNCC: 5 | RNVC: 2
650-791-036-0: RNCC: 5 | RNVC: 2
9560113980: RNCC: 5 | RNVC: 2
AZ182U08-10: RNCC: 5 | RNVC: 2
53668: RNCC: 5 | RNVC: 9
85-687-4718: RNCC: 6 | RNVC: 9

17 Dec 1976

5340-14-225-8383
Synchro Clamp

142258383
S2772-1DG: RNCC: 3 | RNVC: 2
9560138680: RNCC: 5 | RNVC: 2
S2772-1: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-201-9210
Retaining Strap

142019210
574-135-070-0: RNCC: 3 | RNVC: 2

1 Jan 1962

5340-14-336-4106
Angle Bracket

143364106
341A24-1041-20: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-275-7372
Retaining Strap

142757372
NO PRIMARY REF14-275-7372: RNCC: 3 | RNVC: 2
209169: RNCC: 5 | RNVC: 2
401301: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-329-1502
Rod End Clevis

143291502
77891-211: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-416-2532
Rim Lock

144162532
AB9: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-416-6882
Angle Bracket

144166882
413002020028: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-031-3281
Loop Clamp

140313281
521231050111: RNCC: 3 | RNVC: 2
115GE11: RNCC: 5 | RNVC: 2

14 Jun 1980

5340-14-041-3259
Padlock

140413259
183081: RNCC: 3 | RNVC: 2
183081: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-257-8606
Mounting Plate

142578606
9130729: RNCC: 3 | RNVC: 2
9130729: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-515-2328
Angle Bracket

145152328
3526130802: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-433-8499
Angle Bracket

144338499
064532: RNCC: 3 | RNVC: 2

17 Aug 1989

5340-14-461-6548
Bow Handle

144616548
1027451K00: RNCC: 3 | RNVC: 2

19 Mar 1993

5340-14-556-1868
Mounting Bracket

145561868
82382260001: RNCC: 3 | RNVC: 2

11 Feb 2008

5340-14-353-1435
Mending Plate

143531435
611101599: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-367-4583
Angle Bracket

143674583
A11B221274008A1: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-466-1675
Angle Bracket

144661675
166049: RNCC: 3 | RNVC: 2
89170160: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-518-0191
Angle Bracket

145180191
5010116160: RNCC: 3 | RNVC: 2

21 Jan 2000

5340-14-466-3499
Pipe Hanger

144663499
PM1A722414200: RNCC: 3 | RNVC: 2
PM1A722414200: RNCC: 5 | RNVC: 2

3 Nov 1993

5340-14-320-6355
Mending Plate

143206355
109249: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-516-7491
Loop Clamp

145167491
8304058: RNCC: 3 | RNVC: 2
Y00005961: RNCC: 3 | RNVC: 2
Y00005961: RNCC: 5 | RNVC: 9

13 Oct 1999

5340-14-516-9643
Angle Bracket

145169643
10437102: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-501-6357
Metal Grille

145016357
4SHS5030002: RNCC: 3 | RNVC: 2

5 Nov 1997

5340-14-519-1485
Mounting Bracket

145191485
539866: RNCC: 3 | RNVC: 2

9 Mar 2000

5340-14-465-0113
Plug Button

144650113
NO PRIMARY REF14-465-0113: RNCC: 3 | RNVC: 2
710249: RNCC: 5 | RNVC: 9
85-695-0345: RNCC: 6 | RNVC: 9

8 Sep 1993

5340-14-201-9217
Retaining Strap

142019217
574-510-120-0: RNCC: 3 | RNVC: 2

1 Jan 1962

5340-14-522-9621
Mounting Bracket

145229621
ST159-2M664P115: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-14-284-7581
Angle Bracket

142847581
121A21-256-05-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-530-9568
Retaining Strap

145309568
341A63-5041-00: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-14-299-0761
Angle Bracket

142990761
330A58-3941-20: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-390-5469
Mounting Plate

143905469
LN446-005REP3: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-446-6584
Loop Clamp

144466584
304-068-302-0: RNCC: 3 | RNVC: 2

9 Apr 1991

5340-14-308-9722
Retaining Strap

143089722
NO PRIMARY REF14-308-9722: RNCC: 3 | RNVC: 2
620-855-724-0: RNCC: 5 | RNVC: 2
620-855-724-0: RNCC: 5 | RNVC: 2
32932: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-470-2578
Mounting Bracket

144702578
341A21-1002-2601: RNCC: 3 | RNVC: 2

8 Jun 1994

5340-14-438-2429
Pipe Hanger

144382429
M3E708-73: RNCC: 3 | RNVC: 2

7 Mar 1990

5340-14-399-7589
Loop Clamp

143997589
4-444-00P06-01BE: RNCC: 3 | RNVC: 2

14 Mar 1985

5340-14-445-2809
Retaining Bail

144452809
MAT162-0074F1: RNCC: 3 | RNVC: 2

6 Feb 1991

5340-14-533-7446
Mounting Bracket

145337446
168E586-00: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-14-204-7761
Loop Clamp

142047761
675-204-120-0: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-450-2570
Clamping Catch

144502570
GE.65-BR: RNCC: 3 | RNVC: 2
GE65BR: RNCC: 5 | RNVC: 2

25 Sep 1991

5340-14-475-2479
Mounting Bracket

144752479
332A58-1624-00: RNCC: 3 | RNVC: 2

22 Mar 1995

5340-14-489-6558
Angle Bracket

144896558
332A25-1137-21: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-518-8815
Cover Strip

145188815
332A81-0497-23: RNCC: 3 | RNVC: 2

23 Feb 2000

5340-14-453-7487
Mounting Bracket

144537487
2085-01-001: RNCC: 3 | RNVC: 2
89411550: RNCC: 5 | RNVC: 9

5 Mar 1992

5340-14-375-4742
Mending Plate

143754742
319A75-10-117: RNCC: 3 | RNVC: 2
319A-75-10-117: RNCC: 5 | RNVC: 2

26 Feb 1982

5340-14-359-5930
Angle Bracket

143595930
NO PRIMARY REF14-359-5930: RNCC: 3 | RNVC: 2
50895: RNCC: 5 | RNVC: 9

15 Oct 1979

5340-14-549-8628
Mounting Bracket

145498628
2093180-001: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-454-6652
Strap Fastener Loop

144546652
T20-13F2722: RNCC: 3 | RNVC: 2

9 Apr 1992

5340-14-326-0531
Rod End Clevis

143260531
3160S73-37-353: RNCC: 3 | RNVC: 2
85-649-3100: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-427-6109
Loop Clamp

144276109
61211917020: RNCC: 3 | RNVC: 2
540P20: RNCC: 5 | RNVC: 2
99-670-4105-25: RNCC: 5 | RNVC: 2
99670410525: RNCC: 5 | RNVC: 2

26 Oct 1988

5340-14-325-6867
Loop Clamp

143256867
3-2633-02-63A: RNCC: 3 | RNVC: 2
3-2633-02-63: RNCC: 5 | RNVC: 9
3-2633-02-63A: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-381-1875
Access Cover

143811875
848978: RNCC: 3 | RNVC: 2
M18404-25: RNCC: 5 | RNVC: 2
470056: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-438-0226
Retaining Band

144380226
NO PRIMARY REF14-438-0226: RNCC: 3 | RNVC: 2
2-524498-2: RNCC: 5 | RNVC: 9

6 Mar 1990

5340-14-505-2937
Mounting Bracket

145052937
2049842H: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-508-0993
Protection Bellows

145080993
SP1983: RNCC: 3 | RNVC: 2
A06030605: RNCC: 5 | RNVC: 9

26 Aug 1998

5340-14-439-3072
Loop Clamp

144393072
51311905032: RNCC: 3 | RNVC: 2
21P32: RNCC: 5 | RNVC: 2

25 Apr 1990

5340-14-284-7406
Angle Bracket

142847406
121A21-210-29-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-401-2991
Retaining Strap

144012991
601825: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-239-2403
Angle Bracket

142392403
370111: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-254-2908
Loop Clamp

142542908
25G15: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-351-6195
Mounting Plate

143516195
1917: RNCC: 3 | RNVC: 2
45372: RNCC: 5 | RNVC: 2
376886I: RNCC: 5 | RNVC: 2

12 Sep 1978

5340-14-446-8786
Protection Bellows

144468786
81452407: RNCC: 3 | RNVC: 2

17 Apr 1991

5340-14-515-6056
Strap Hinge

145156056
A91000124: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-525-7873
Mounting Bracket

145257873
F145054: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-355-3785
Pipe Hanger

143553785
121B71-311-19-0: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-370-2777
Loop Clamp

143702777
19284126-1: RNCC: 3 | RNVC: 2
S284126-1: RNCC: 5 | RNVC: 2
1928412601: RNCC: 5 | RNVC: 2

18 May 1981

5340-14-315-4838
Access Cover

143154838
620-841-006-0: RNCC: 3 | RNVC: 2
620-841-006-0: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-302-0113
Pipe Hanger

143020113
A10-19-419-00-0: RNCC: 3 | RNVC: 2
A10-19-419-00-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-233-3256
Plug Button

142333256
A10-69-050-03-0: RNCC: 3 | RNVC: 2
A10-69-050-03-0: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-366-3501
Mortise Lock Set

143663501
SERRURE450P3DPB1C1-293: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-232-0744
Rod End Clevis

142320744
M3B216-15-853: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-389-8598
Pipe Hanger

143898598
160-11522-20: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-519-3668
Mounting Plate

145193668
350A21-1066-26: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-393-8881
Sliding Door Track

143938881
366A87-1036-58: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-378-4144
Angle Bracket

143784144
366A67-3111-00: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-366-9126
Rod End Clevis

143669126
NO PRIMARY REF14-366-9126: RNCC: 3 | RNVC: 2
D10-22688: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-555-1073
Angle Bracket

145551073
332R87-1068-27: RNCC: 3 | RNVC: 2

1 Oct 2007

5340-14-410-3147
Pipe Hanger

144103147
332A52-1029-00: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-14-409-9463
Angle Bracket

144099463
8214-12: RNCC: 3 | RNVC: 9
9222334980: RNCC: 5 | RNVC: 2
9222334980: RNCC: 5 | RNVC: 9

4 Jun 1986

5340-14-391-7859
Angle Bracket

143917859
V2PT3242-119923: RNCC: 3 | RNVC: 2
V2PT3242-119923: RNCC: 5 | RNVC: 2

21 Mar 1984

5340-14-539-8251
Mounting Plate

145398251
MC0119-01: RNCC: 3 | RNVC: 2

11 Feb 2004

5340-14-473-3277
Pipe Hanger

144733277
MY20717-55: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-541-3321
Mounting Bracket

145413321
31289: RNCC: 3 | RNVC: 2

27 May 2004

5340-14-364-5736
Angle Bracket

143645736
5416852B: RNCC: 3 | RNVC: 2
5416852: RNCC: 5 | RNVC: 2

2 Sep 1980

5340-14-327-6822
Bail Handle

143276822
050A11-556846R: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-547-9779
Mounting Bracket

145479779
RA1M701556513: RNCC: 3 | RNVC: 2

30 Nov 2005

5340-14-478-2444
Angle Bracket

144782444
058938N01TRA: RNCC: 3 | RNVC: 2
058938N: RNCC: 5 | RNVC: 2

18 Oct 1995

5340-14-503-2563
Synchro Clamp

145032563
0301537950: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-533-4268
Angle Bracket

145334268
F1262281: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-436-6376
Cover Strip

144366376
DA2C313101015: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-519-1989
Metal Grille

145191989
1SH41598366: RNCC: 3 | RNVC: 2

14 Mar 2000

5340-14-551-2917
Angle Bracket

145512917
RA1M703850455N1: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-316-2549
Loop Clamp

143162549
412205: RNCC: 3 | RNVC: 2
412205: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-554-1482
Mounting Bracket

145541482
82051016001: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-551-3397
Bridge Clamp

145513397
RA1M296711505: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-551-8550
Mounting Bracket

145518550
43011002: RNCC: 3 | RNVC: 2
43011002: RNCC: 3 | RNVC: 9

2 Nov 2006

5340-14-529-8909
Mounting Bracket

145298909
10609888: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-505-6559
Mounting Bracket

145056559
E25001065000: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-524-6094
Mounting Plate

145246094
45219848: RNCC: 3 | RNVC: 2

29 Mar 2001

5340-14-226-2788
Retaining Strap

142262788
0339260: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-526-4526
Pipe Hanger

145264526
RA1M704936811: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-534-5298
Access Cover

145345298
4009502300-01: RNCC: 3 | RNVC: 2

26 Mar 2003

5340-14-557-0765
Utility Access Door

145570765
271535318: RNCC: 3 | RNVC: 2
27153531-8: RNCC: 3 | RNVC: 9
271535318: RNCC: 5 | RNVC: 9

6 May 2008

5340-14-434-3744
Mounting Bracket

144343744
332A22-1630-29: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-235-6113
Turnbuckle Body

142356113
1050-27-104-05-0: RNCC: 3 | RNVC: 2
27-104-05-0: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-042-3385
Angle Bracket

140423385
121B63-108-02-0: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-546-3105
Mounting Plate

145463105
3-85-31-02-113-33: RNCC: 3 | RNVC: 2

23 Jun 2005

5340-14-466-7899
Shelf Bracket

144667899
915-3-66-154: RNCC: 3 | RNVC: 2

26 Nov 1993

5340-14-409-0946
Shimmy Damper

144090946
S3GMAF6151-84011052-6: RNCC: 3 | RNVC: 2
12410263-6: RNCC: 5 | RNVC: 2
84011052-6: RNCC: 5 | RNVC: 2

16 Apr 1986

5340-14-251-9477
Handwheel

142519477
301C0-036REP48: RNCC: 3 | RNVC: 2
32-224-51-10: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-529-4183
Pipe Hanger

145294183
EA1M705-28-09: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-216-1098
Webbing Strap

142161098
NO PRIMARY REF14-216-1098: RNCC: 3 | RNVC: 2
1000104: RNCC: 5 | RNVC: 2
1000104: RNCC: 5 | RNVC: 2
2634-1700: RNCC: 5 | RNVC: 9
HO-46A: RNCC: 6 | RNVC: 9

1 Jan 1965

5340-14-554-0466
Mounting Plate

145540466
SF-32-0351-REP101: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-14-497-7746
Pipe Hanger

144977746
307-879-301-0: RNCC: 3 | RNVC: 2

15 Oct 1997

5340-14-340-3352
Retaining Strap

143403352
M3C704-42-02: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-524-4877
Retaining Strap

145244877
234-00A68352: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-503-2874
Mounting Bracket

145032874
332AMR-0314-21: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-462-3759
Retaining Strap

144623759
P4C008179-00: RNCC: 3 | RNVC: 9
5046155: RNCC: 5 | RNVC: 9

15 Apr 1993

5340-14-437-4639
Mounting Bracket

144374639
332A91-2406-00: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-368-2981
Filler Opening Cap

143682981
AD053: RNCC: 3 | RNVC: 2
000673: RNCC: 5 | RNVC: 2
010690: RNCC: 5 | RNVC: 2
76-01J74A: RNCC: 5 | RNVC: 2

20 Feb 1981

5340-14-550-0770
Angle Bracket

145500770
169E661-00: RNCC: 3 | RNVC: 2

1 Jun 2006

5340-14-301-1058
Bumper

143011058
330A22-2013-54: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-448-9920
Mounting Bracket

144489920
40142319: RNCC: 3 | RNVC: 2
DM3-35292: RNCC: 5 | RNVC: 2
DM3-35292: RNCC: 5 | RNVC: 9
5043571: RNCC: 5 | RNVC: 9

24 Jul 1991

5340-14-390-5438
Flush Lock

143905438
NO PRIMARY REF14-390-5438: RNCC: 3 | RNVC: 2
1253: RNCC: 5 | RNVC: 2
21253: RNCC: 5 | RNVC: 2

26 Jan 1984

5340-14-320-0970
Rod End Clevis

143200970
21-20-46-1: RNCC: 3 | RNVC: 2
21-20-46-1: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-367-2284
Threaded Rod End

143672284
A10-33-181-02-0: RNCC: 3 | RNVC: 2
A10-33-181-02-0: RNCC: 5 | RNVC: 2
A10-33-181-02-0: RNCC: 5 | RNVC: 2
85-800-7907: RNCC: 6 | RNVC: 9

11 Dec 1980

5340-14-364-5695
Flush Catch Claw

143645695
AZ861-322A: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-14-370-8724
Pipe Hanger

143708724
303-931-202-0: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-514-3332
Mounting Bracket

145143332
E4M704-21-914/1: RNCC: 3 | RNVC: 2

12 May 1999

5340-14-289-6370
Rod End Connector

142896370
121E27-380-21-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-486-2515
Mounting Plate

144862515
282-1-O-101: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-349-3588
Rod End Clevis

143493588
NRA76-3: RNCC: 3 | RNVC: 9
RASNRA76-3: RNCC: 5 | RNVC: 9

22 May 1978

5340-14-480-2398
Mounting Bracket

144802398
10310001: RNCC: 3 | RNVC: 2

28 Feb 1996

5340-14-448-4748
Mounting Bracket

144484748
5000923730: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-14-568-9236
Utility Resilient Mount

145689236
702607: RNCC: 3 | RNVC: 2

21 Jul 2011

5340-14-410-0751
Threaded Rod End

144100751
211079292PL24: RNCC: 3 | RNVC: 2

4 Jun 1986

5340-14-394-9565
Angle Bracket

143949565
20735706: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-500-9108
Mounting Bracket

145009108
D66502110000: RNCC: 3 | RNVC: 2
F300 0T 024 9316: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-549-9676
Mounting Plate

145499676
2092602: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-518-3638
Mounting Bracket

145183638
10377432: RNCC: 3 | RNVC: 2

2 Feb 2000

5340-14-549-1505
Mounting Bracket

145491505
5010559896: RNCC: 3 | RNVC: 2

6 Mar 2006

5340-14-488-2407
Mounting Bracket

144882407
10199887: RNCC: 3 | RNVC: 2

23 Apr 1997

5340-14-419-2362
Clamping Catch

144192362
GT64ZB: RNCC: 3 | RNVC: 2
72575: RNCC: 5 | RNVC: 2

16 Oct 1987

5340-14-528-6016
Loop Clamp

145286016
68935034: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-525-5923
Bumper

145255923
10 146 372 1200: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-553-6441
Mounting Plate

145536441
61385069: RNCC: 3 | RNVC: 2

26 Apr 2007

5340-14-528-5794
Loop Clamp

145285794
908600: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-520-0617
Runner

145200617
T257A0002204: RNCC: 3 | RNVC: 2

10 May 2000

5340-14-258-7806
Buckle

142587806
1935: RNCC: 3 | RNVC: 2
AP26: RNCC: 5 | RNVC: 2
MD1019P: RNCC: 5 | RNVC: 2
1935: RNCC: 5 | RNVC: 9
MD1019P: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-574-9167
Utility Resilient Mount

145749167
7403154251: RNCC: 3 | RNVC: 2
3154251: RNCC: 5 | RNVC: 2

28 Feb 2013

5340-14-502-6109
Runner

145026109
5010167402: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-329-5323
Rod End Clevis

143295323
152230: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-494-6151
Access Cover

144946151
806 816 188: RNCC: 3 | RNVC: 2
F300 0T 017 5426: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-359-6003
Access Cover

143596003
16560109: RNCC: 3 | RNVC: 2
16560109: RNCC: 3 | RNVC: 9

15 Oct 1979

5340-14-526-0422
Utility Access Door

145260422
10612693: RNCC: 3 | RNVC: 2

28 Jun 2001

5340-14-535-9670
Mounting Bracket

145359670
10581466: RNCC: 3 | RNVC: 2

2 Jul 2003

5340-14-485-1033
Anchor Strap

144851033
009204050P: RNCC: 3 | RNVC: 2

8 Jan 1997

5340-14-523-8841
Strap Hinge

145238841
546588-001: RNCC: 3 | RNVC: 9

8 Feb 2001

5340-14-530-8801
Bail Handle

145308801
11-106-26: RNCC: 3 | RNVC: 2

15 Jul 2002

5340-14-384-3884
Retaining Clip

143843884
305-048: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-542-1298
Mounting Plate

145421298
5302835-035-02-A1: RNCC: 3 | RNVC: 2

7 Jul 2004

5340-14-541-5144
Mounting Bracket

145415144
1091402-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-206-1681
Retaining Strap

142061681
3130S81-30-009: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-488-1695
Mounting Plate

144881695
057-01-101: RNCC: 3 | RNVC: 2

18 Apr 1997

5340-14-504-4220
Dashpot

145044220
8007-024: RNCC: 3 | RNVC: 2

16 Feb 1998

5340-14-541-5166
Mounting Plate

145415166
1091455-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-042-5885
Bow Handle

140425885
676-42731-00F6: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-438-2579
Loop Clamp

144382579
LB316-16PP: RNCC: 3 | RNVC: 2

12 Mar 1990

5340-14-339-7313
Bridge Clamp

143397313
330A58-1425-00: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-401-7154
Bumper

144017154
CCN101115437: RNCC: 3 | RNVC: 2
CCN101-115-437: RNCC: 5 | RNVC: 2

13 Jun 1985

5340-14-204-2242
Loop Clamp

142042242
MT63GN: RNCC: 3 | RNVC: 2
BR752-63: RNCC: 3 | RNVC: 2
752D63: RNCC: 5 | RNVC: 2
MT63GNB2: RNCC: 5 | RNVC: 9
85-100-4961: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-14-482-9315
Pipe Hanger

144829315
78732-050-043: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-454-1762
Door Handle

144541762
LN331-018 3222431-10: RNCC: 3 | RNVC: 2
32-224-31-10: RNCC: 5 | RNVC: 2
322243110: RNCC: 5 | RNVC: 2

24 Mar 1992

5340-14-277-2366
Butt Hinge

142772366
917388: RNCC: 3 | RNVC: 2
PA368-3M1713P4: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-338-6906
Leaf Spring

143386906
0038724681: RNCC: 3 | RNVC: 2
0038724681: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-536-2159
Mounting Bracket

145362159
RA1M216900211N1: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-14-499-5980
Loop Clamp

144995980
501237: RNCC: 3 | RNVC: 2
91602988: RNCC: 5 | RNVC: 2
F300 0T 023 5700: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-313-7434
Support Hook

143137434
0257851250: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-509-3468
Mounting Plate

145093468
30807-484: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-420-0565
Protection Bellows

144200565
8564621: RNCC: 3 | RNVC: 9
8564621: RNCC: 5 | RNVC: 2
008564621: RNCC: 5 | RNVC: 9

18 Nov 1987

5340-14-523-5502
Loop Clamp

145235502
R101050B: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-14-532-2432
Mounting Bracket

145322432
F00185287: RNCC: 3 | RNVC: 2
F00185287: RNCC: 5 | RNVC: 2

23 Oct 2002

5340-14-439-5463
Runner

144395463
038833N: RNCC: 3 | RNVC: 2

14 May 1990

5340-14-433-0492
Runner

144330492
02-06-112: RNCC: 3 | RNVC: 2

5 Jul 1989

5340-14-405-2628
Retaining Strap

144052628
221411P: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-514-3086
Buckle

145143086
A41: RNCC: 3 | RNVC: 2

10 May 1999

Load More Results