What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 155 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 155 of 446

5340-14-531-9668
Elastic Strap

145319668
A66191: RNCC: 3 | RNVC: 2

2 Oct 2002

5340-14-535-9665
Rod End Connector

145359665
10278255: RNCC: 3 | RNVC: 2

2 Jul 2003

5340-14-489-6509
Mounting Plate

144896509
330A31-1775-47: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-411-3466
Mounting Plate

144113466
R4P703-363: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-500-8173
Section Block Clamp

145008173
E64009998051: RNCC: 3 | RNVC: 2
F300 0T 024 8375: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-505-3430
Loop Clamp

145053430
RSGU1-8-15-W1: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-202-1652
Mounting Bracket

142021652
0202007400: RNCC: 3 | RNVC: 2
202-00-740: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-14-286-4572
Retaining Clip

142864572
123-90025-002: RNCC: 3 | RNVC: 2
123-90025-002: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-531-2148
Mounting Bracket

145312148
341A62-1167-20: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-488-5246
Mounting Plate

144885246
7522-50044: RNCC: 3 | RNVC: 2

14 May 1997

5340-14-364-4423
Retaining Clip

143644423
053M51-599154L: RNCC: 3 | RNVC: 2
0599154L00: RNCC: 5 | RNVC: 2

2 Sep 1980

5340-14-499-1551
Mounting Bracket

144991551
59154277-801: RNCC: 3 | RNVC: 2
101006003033A: RNCC: 3 | RNVC: 9
5915 4277-801: RNCC: 5 | RNVC: 2
5915 4277-801: RNCC: 5 | RNVC: 2
F300 0T 019 6634: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-364-5495
Pipe Hanger

143645495
2588: RNCC: 3 | RNVC: 9
52284-9: RNCC: 5 | RNVC: 2

2 Sep 1980

5340-14-553-5369
Swivel Caster

145535369
EP5BD200-21B: RNCC: 3 | RNVC: 2

13 Apr 2007

5340-14-268-9901
Handwheel

142689901
000MA1055F3REP1: RNCC: 3 | RNVC: 2
000MA0060F6-2N1: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-390-5098
Mounting Plate

143905098
NO PRIMARY REF14-390-5098: RNCC: 3 | RNVC: 2
1820V60REP15: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-14-383-1108
Angle Bracket

143831108
366A24-1001-43: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-464-9678
Angle Bracket

144649678
365A61-8230-3101: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-413-9918
Anchor Strap

144139918
13-201-110: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-279-5274
Rod End Clevis

142795274
262-10-27151-01: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-438-3061
Detent Plunger

144383061
815-0-91-114: RNCC: 3 | RNVC: 2

13 Mar 1990

5340-14-277-8587
Cover Strip

142778587
3160S25-21-017-51: RNCC: 3 | RNVC: 2
3160S25-21-017RU: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-350-3172
Access Cover

143503172
053Q00-573883K: RNCC: 3 | RNVC: 2
0573883K00: RNCC: 5 | RNVC: 2
053E00-573883K: RNCC: 5 | RNVC: 9

12 Jul 1978

5340-14-265-2887
Butt Hinge

142652887
J36190-50X30LAIT0NCHR0ME: RNCC: 2 | RNVC: 2

1 Jan 1970

5340-14-372-7388
Utility Access Door

143727388
365A25-0014-0205: RNCC: 3 | RNVC: 2

14 Mar 1996

5340-14-507-3324
Rim Lock

145073324
3227H-LINK/D1585: RNCC: 3 | RNVC: 2
NNP5340929205065: RNCC: 5 | RNVC: 2
3227H-LINK: RNCC: 5 | RNVC: 2

26 Jun 1998

5340-14-386-6733
Bumper

143866733
EE130-100: RNCC: 3 | RNVC: 2
EE130-100: RNCC: 5 | RNVC: 2
EE130-100B: RNCC: 5 | RNVC: 2
E130-100: RNCC: 5 | RNVC: 2

24 Aug 1983

5340-14-475-5059
Mounting Bracket

144755059
TB1030101F016: RNCC: 3 | RNVC: 2
TB1030101-00SPF016: RNCC: 5 | RNVC: 2
08-60-0041: RNCC: 5 | RNVC: 9

12 Apr 1995

5340-14-265-1358
Loop Clamp

142651358
55218-212D507DB: RNCC: 3 | RNVC: 2
55218-212-001DB: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-542-8981
Synchro Clamp

145428981
708120S100-16A: RNCC: 3 | RNVC: 2

14 Aug 2004

5340-14-442-0270
Locking Stay

144420270
332A92-1101-11: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-532-3207
Access Cover

145323207
192E577-00: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-398-6448
Webbing Strap

143986448
B80CAT3-8M: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-320-4739
Angle Bracket

143204739
165022: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-464-3180
Elastic Strap

144643180
5220124: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-550-4881
Angle Bracket

145504881
RA1M701732171N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-392-1954
Access Cover

143921954
29003611: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-520-5277
Mounting Bracket

145205277
46063957: RNCC: 3 | RNVC: 2
46063957: RNCC: 5 | RNVC: 9

22 May 2000

5340-14-555-1300
Angle Bracket

145551300
82388418000: RNCC: 3 | RNVC: 2

3 Oct 2007

5340-14-558-6157
Utility Resilient Mount

145586157
82373154000: RNCC: 3 | RNVC: 2

16 Oct 2008

5340-14-382-4959
Access Cover

143824959
16761353: RNCC: 3 | RNVC: 2
16761353: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-518-6048
Mounting Bracket

145186048
5010094722: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-262-7361
Rod End Clevis

142627361
874374: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-381-5544
Mending Plate

143815544
398002100003: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-416-7004
Access Cover

144167004
533980: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-512-7695
Access Cover

145127695
800033610: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-357-5716
Angle Bracket

143575716
15175008: RNCC: 3 | RNVC: 2
15175008: RNCC: 5 | RNVC: 2

7 Jun 1979

5340-14-534-8541
Mounting Bracket

145348541
10623045: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-14-532-4774
Angle Bracket

145324774
MOUS89: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-14-520-3637
Mounting Plate

145203637
45834655: RNCC: 3 | RNVC: 9

17 May 2000

5340-14-549-0840
Angle Bracket

145490840
RA1M706212111N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-329-4372
Mending Plate

143294372
A83737: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-549-3028
Loop Clamp

145493028
5010610057: RNCC: 3 | RNVC: 2

21 Mar 2006

5340-14-545-6573
Mounting Bracket

145456573
10673478000: RNCC: 3 | RNVC: 2

26 Apr 2005

5340-14-549-8231
Mounting Plate

145498231
2092699: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-451-0188
Loop Clamp

144510188
10-690019: RNCC: 3 | RNVC: 2

28 Oct 1991

5340-14-458-8899
Mounting Bracket

144588899
401275: RNCC: 3 | RNVC: 2
BGE401275: RNCC: 5 | RNVC: 2

5 Nov 1992

5340-14-560-9190
Utility Resilient Mount

145609190
MB7237F00: RNCC: 3 | RNVC: 2

2 Jun 2009

5340-14-546-5831
Angle Bracket

145465831
RA1A705546021: RNCC: 3 | RNVC: 2

20 Jul 2005

5340-14-501-5216
Retaining Strap

145015216
0315771050: RNCC: 3 | RNVC: 2

29 Oct 1997

5340-14-446-7413
Angle Bracket

144467413
39155911: RNCC: 3 | RNVC: 2

9 Apr 1991

5340-14-535-9682
Lock Bolt

145359682
401110: RNCC: 3 | RNVC: 2

2 Jul 2003

5340-14-535-2473
Mounting Bracket

145352473
6501EHE160: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-554-9427
Loop Clamp

145549427
78651DH20AG: RNCC: 1 | RNVC: 2
78651DH20AG: RNCC: 3 | RNVC: 2

11 Sep 2007

5340-14-435-6282
Mounting Bracket

144356282
76161801: RNCC: 3 | RNVC: 2
76161801: RNCC: 5 | RNVC: 9

14 Nov 1989

5340-14-422-4495
Bow Handle

144224495
177767: RNCC: 3 | RNVC: 2

3 Mar 1988

5340-14-444-1289
Mending Plate

144441289
EDM0595: RNCC: 3 | RNVC: 2
39515256: RNCC: 5 | RNVC: 2

18 Dec 1990

5340-14-536-2153
Angle Bracket

145362153
RA1B703126137N1: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-14-456-2795
Mounting Bracket

144562795
T895AA16: RNCC: 3 | RNVC: 2
5045932: RNCC: 5 | RNVC: 9
T895AA16: RNCC: 5 | RNVC: 9

25 Jun 1992

5340-14-464-0858
Angle Bracket

144640858
366A61-2115-20: RNCC: 3 | RNVC: 2

15 Jul 1993

5340-14-383-5969
Tubular Fairlead

143835969
TB30-27166-110: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-481-0957
Pipe Hanger

144810957
78732-050-053: RNCC: 3 | RNVC: 2

18 Apr 1996

5340-14-524-4849
Rod End Clevis

145244849
ST159-2M352P22: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-353-5708
Retaining Strap

143535708
F275-81: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-041-0849
Retaining Strap

140410849
J00436-00-6000P002: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-555-0819
Mounting Bracket

145550819
329-01-143-30: RNCC: 3 | RNVC: 2

27 Sep 2007

5340-14-529-9077
Access Cover

145299077
160-888073-04: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-544-7617
Mounting Plate

145447617
350A25-1680-20: RNCC: 3 | RNVC: 2

22 Feb 2005

5340-14-442-0100
Bridge Clamp

144420100
332P65-1450-08: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-550-8630
Spring Holder

145508630
1086-032: RNCC: 3 | RNVC: 2

25 Jul 2006

5340-14-469-4337
Mounting Plate

144694337
815-1-84-050: RNCC: 3 | RNVC: 2

25 Apr 1994

5340-14-535-6982
Mending Plate

145356982
54111-720-1: RNCC: 3 | RNVC: 2
54111-720-1: RNCC: 5 | RNVC: 9

18 Jun 2003

5340-14-329-1371
Control Rod

143291371
880-27-0-037-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-318-3555
Angle Bracket

143183555
26-901518-3: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-527-5976
Mounting Bracket

145275976
C0R251-820-80: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-14-409-3723
Loop Clamp

144093723
2060NA: RNCC: 3 | RNVC: 2
12230776-2: RNCC: 5 | RNVC: 2
13942666-6: RNCC: 5 | RNVC: 2

28 May 1986

5340-14-351-3715
Loop Clamp

143513715
620-854-767-0: RNCC: 3 | RNVC: 2
85-689-4102: RNCC: 6 | RNVC: 9

10 Aug 1978

5340-14-478-4996
Bumper

144784996
100A108109-1: RNCC: 3 | RNVC: 2

8 Nov 1995

5340-14-408-0315
Support Hook

144080315
20724584-9: RNCC: 3 | RNVC: 2
724584: RNCC: 5 | RNVC: 2

19 Mar 1986

5340-14-495-9103
Rod End Connector

144959103
F00152411: RNCC: 3 | RNVC: 2
F00152411: RNCC: 5 | RNVC: 9
F300 0T 020 4756: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-467-7836
Bow Handle

144677836
19-1-3569: RNCC: 3 | RNVC: 2
498041913569: RNCC: 5 | RNVC: 2
498041913569: RNCC: 5 | RNVC: 9

27 Jan 1994

5340-14-554-8686
Strap Fastener Loop

145548686
GE09-9: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-457-4422
Rod Retainer Clip

144574422
NO PRIMARY REF14-457-4422: RNCC: 3 | RNVC: 2
19296457: RNCC: 5 | RNVC: 9

3 Sep 1992

5340-14-323-9936
Angle Bracket

143239936
E4M381-11-831: RNCC: 3 | RNVC: 2
85-800-3948: RNCC: 6 | RNVC: 9

1 Jan 1975

5340-14-434-1854
Clamping Catch

144341854
GE.11-BR: RNCC: 3 | RNVC: 2
0223221M00: RNCC: 5 | RNVC: 2
GE11BR: RNCC: 5 | RNVC: 2

11 Sep 1989

5340-14-410-4559
Angle Bracket

144104559
461-10877-000: RNCC: 3 | RNVC: 2
85-692-9943: RNCC: 6 | RNVC: 9

30 Jun 1986

5340-14-384-0819
Angle Bracket

143840819
NO PRIMARY REF14-384-0819: RNCC: 3 | RNVC: 2
709684: RNCC: 5 | RNVC: 9

4 May 1983

5340-14-531-9729
Mounting Bracket

145319729
YT11V6500-10: RNCC: 3 | RNVC: 2

2 Oct 2002

5340-14-361-5094
Rod End Clevis

143615094
0072-17-03: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-489-1395
Mounting Plate

144891395
16916282: RNCC: 3 | RNVC: 2
16916282: RNCC: 5 | RNVC: 2

27 Jun 1997

5340-14-418-5615
Angle Bracket

144185615
5-454105: RNCC: 3 | RNVC: 9
5-454105: RNCC: 5 | RNVC: 2
5-454105: RNCC: 5 | RNVC: 9

2 Sep 1987

5340-14-530-1110
Block Clamp

145301110
457-02339-000: RNCC: 3 | RNVC: 2

14 May 2002

5340-14-437-3540
Access Cover

144373540
J00650-01-0100P001: RNCC: 3 | RNVC: 2

30 Jan 1990

5340-14-467-8550
Mounting Bracket

144678550
1400-56-04: RNCC: 3 | RNVC: 2
714601: RNCC: 5 | RNVC: 2
89296001: RNCC: 5 | RNVC: 2

27 Jan 1994

5340-14-492-6462
Mounting Plate

144926462
NO PRIMARY REF14-492-6462: RNCC: 3 | RNVC: 2
47174-705: RNCC: 5 | RNVC: 9
F300 0T 008 3251: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-202-0793
Loop Clamp

142020793
0000245833: RNCC: 3 | RNVC: 2
0000245833: RNCC: 5 | RNVC: 9
245833: RNCC: 5 | RNVC: 9
245833: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-14-528-8116
Mounting Bracket

145288116
RP1M625247802: RNCC: 3 | RNVC: 2

18 Feb 2002

5340-14-453-0639
Mounting Plate

144530639
15101740K: RNCC: 3 | RNVC: 2

3 Feb 1992

5340-14-463-6987
Mounting Bracket

144636987
007422228P: RNCC: 3 | RNVC: 2

23 Jun 1993

5340-14-392-9223
Access Cover

143929223
420721: RNCC: 3 | RNVC: 2
420721: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-14-400-0221
Access Cover

144000221
608622: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-253-4658
Access Cover

142534658
70663590: RNCC: 3 | RNVC: 2
70663590: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-439-2166
Handwheel

144392166
16380372: RNCC: 3 | RNVC: 2
16380372: RNCC: 5 | RNVC: 9

25 Apr 1990

5340-14-502-7724
Anchor Strap

145027724
6T9201: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-553-9870
Access Cover

145539870
156 020: RNCC: 3 | RNVC: 2
156 020: RNCC: 3 | RNVC: 2

6 Jun 2007

5340-14-397-5779
Access Cover

143975779
0003700047: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-353-6289
Anchor Strap

143536289
0016760081: RNCC: 3 | RNVC: 2
0016760081: RNCC: 5 | RNVC: 9

16 Jan 1979

5340-14-207-2795
Access Cover

142072795
204156: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-402-6424
Anchor Strap

144026424
TH20G605: RNCC: 3 | RNVC: 2

19 Jul 1985

5340-14-520-7619
Mounting Plate

145207619
47176460: RNCC: 3 | RNVC: 2

14 Jun 2000

5340-14-548-6001
Mounting Bracket

145486001
RA1B702206561: RNCC: 3 | RNVC: 2

26 Jan 2006

5340-14-392-9685
Retaining Strap

143929685
398851: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-433-5384
Runner

144335384
8164596: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-516-6831
Mounting Bracket

145166831
56095756: RNCC: 3 | RNVC: 2

12 Oct 1999

5340-14-454-8821
Bumper

144548821
5000721704: RNCC: 3 | RNVC: 2

24 Apr 1992

5340-14-547-9775
Pipe Hanger

145479775
RA1M701396129: RNCC: 3 | RNVC: 2

30 Nov 2005

5340-14-439-6729
Mounting Bracket

144396729
16316375: RNCC: 3 | RNVC: 2
16316375: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-381-1281
Retaining Strap

143811281
BAZ5157: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-043-0137
Mending Plate

140430137
50091773: RNCC: 3 | RNVC: 2
50091773: RNCC: 5 | RNVC: 9

20 Jul 1982

5340-14-475-2799
Angle Bracket

144752799
56300277: RNCC: 3 | RNVC: 2

28 Mar 1995

5340-14-368-8409
Runner

143688409
SR3BLANC: RNCC: 3 | RNVC: 2

10 Mar 1981

5340-14-359-6709
Door Handle

143596709
90030: RNCC: 3 | RNVC: 9
5000502548: RNCC: 5 | RNVC: 2
EC1531: RNCC: 5 | RNVC: 9
5000502548: RNCC: 5 | RNVC: 9
90030E: RNCC: 5 | RNVC: 9

15 Oct 1979

5340-14-489-5405
Mounting Bracket

144895405
45571818: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-14-202-2116
Threaded Rod End

142022116
STE15: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-362-8794
Strapping

143628794
BA10LA: RNCC: 3 | RNVC: 2

19 Mar 1980

5340-14-284-5463
Retaining Strap

142845463
0249927710: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-549-3068
Pipe Hanger

145493068
5010631446: RNCC: 3 | RNVC: 2

21 Mar 2006

5340-14-396-1212
Bow Handle

143961212
CM1168002: RNCC: 3 | RNVC: 9

27 Nov 1984

5340-14-490-6472
Runner

144906472
VR3802500: RNCC: 3 | RNVC: 2
VR380250: RNCC: 5 | RNVC: 2

8 Oct 1997

5340-14-549-0056
Mounting Bracket

145490056
AJ1406A00: RNCC: 3 | RNVC: 2

1 Mar 2006

5340-14-368-9570
Mounting Plate

143689570
16596113: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-493-3411
Mounting Plate

144933411
5010045121: RNCC: 3 | RNVC: 2
F300 0T 012 4666: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-446-4829
Synchro Clamp

144464829
291034R: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-14-417-5311
Shimmy Damper

144175311
4012A353AREP6: RNCC: 3 | RNVC: 2
500047: RNCC: 5 | RNVC: 2

8 Jul 1987

5340-14-565-8468
Utility Resilient Mount

145658468
539243-55: RNCC: 3 | RNVC: 2
539243-00-49-405-55: RNCC: 5 | RNVC: 9

28 Sep 2010

5340-14-527-2689
Eye Hook

145272689
19204148: RNCC: 3 | RNVC: 2

17 Oct 2001

5340-14-454-0528
Blank Panel

144540528
16293403: RNCC: 3 | RNVC: 2
16293403: RNCC: 5 | RNVC: 9

19 Mar 1992

5340-14-328-1160
Retaining Strap

143281160
J00650-01-0800P002: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-511-9947
Bridge Clamp

145119947
4716870: RNCC: 3 | RNVC: 2
0053558: RNCC: 5 | RNVC: 2
4716870: RNCC: 5 | RNVC: 9

2 Feb 1999

5340-14-447-3441
Blank Panel

144473441
60917966: RNCC: 3 | RNVC: 2
89280576: RNCC: 5 | RNVC: 2

15 May 1991

5340-14-489-5317
Angle Bracket

144895317
20231559: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-14-480-5557
Mounting Plate

144805557
T1082AA27: RNCC: 3 | RNVC: 2
416032: RNCC: 5 | RNVC: 9
T1082AA27: RNCC: 5 | RNVC: 9

14 Mar 1996

5340-14-457-2832
Mounting Bracket

144572832
7700504422: RNCC: 3 | RNVC: 2

20 Aug 1992

5340-14-302-9094
Retaining Strap

143029094
GSM1929REP8: RNCC: 3 | RNVC: 2
GSM1929DET8: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-525-1835
Mounting Bracket

145251835
06310P107017: RNCC: 3 | RNVC: 2
14210880J: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-448-1501
Cover Strip

144481501
22S0313001: RNCC: 3 | RNVC: 2
22S0313001: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-548-7443
Mounting Bracket

145487443
5010650114: RNCC: 3 | RNVC: 2
PI600: RNCC: 3 | RNVC: 2

6 Feb 2006

5340-14-434-6945
Retaining Strap

144346945
536017: RNCC: 3 | RNVC: 2

2 Oct 1989

5340-14-322-2253
Bumper

143222253
055E02-519469M: RNCC: 3 | RNVC: 2
0519469M00: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-548-7555
Rod Retainer Clip

145487555
30006379: RNCC: 3 | RNVC: 2

7 Feb 2006

5340-14-550-2711
Snap Hook

145502711
2471: RNCC: 3 | RNVC: 2

14 Jun 2006

5340-14-547-1948
Loop Clamp

145471948
EN4113S07NH: RNCC: 2 | RNVC: 2

4 Oct 2005

5340-14-489-5330
Mounting Plate

144895330
20232544: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-14-544-5506
Mounting Bracket

145445506
10535874001: RNCC: 3 | RNVC: 2

9 Feb 2005

5340-14-397-9792
Butt Hinge

143979792
005877557P: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-383-4398
Runner

143834398
16764105: RNCC: 3 | RNVC: 2
16764105: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-412-2393
Expansion Plug

144122393
4032644: RNCC: 3 | RNVC: 2
SY3871: RNCC: 5 | RNVC: 2
4032644: RNCC: 5 | RNVC: 9
SY3871: RNCC: 5 | RNVC: 9

8 Oct 1986

5340-14-545-2412
Mounting Bracket

145452412
T943A2001126: RNCC: 3 | RNVC: 2

29 Mar 2005

5340-14-364-4865
Bridge Clamp

143644865
21266: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-14-361-6704
Clamping Catch

143616704
NBC10PB370: RNCC: 3 | RNVC: 2
BAZM00276: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-14-531-0162
Access Cover

145310162
D40-22622: RNCC: 3 | RNVC: 2

22 Jul 2002

5340-14-374-6164
Angle Bracket

143746164
7380-37: RNCC: 3 | RNVC: 9

30 Jan 1982

5340-14-422-8041
Quick Release Pin

144228041
NO PRIMARY REF14-422-8041: RNCC: 3 | RNVC: 2
10065770: RNCC: 5 | RNVC: 2
LS6T11-04: RNCC: 5 | RNVC: 9

17 Mar 1988

5340-14-450-0361
Butt Hinge

144500361
CX421CB: RNCC: 3 | RNVC: 2
CX421CB: RNCC: 5 | RNVC: 2
85-694-6121: RNCC: 6 | RNVC: 9

18 Sep 1991

5340-14-508-7657
Mounting Plate

145087657
BS2842.09.00.000: RNCC: 3 | RNVC: 2
BS2842-09-00-000: RNCC: 5 | RNVC: 9

30 Sep 1998

5340-14-501-1683
Mounting Bracket

145011683
019-016-054-00: RNCC: 3 | RNVC: 2
019.016.054.00: RNCC: 3 | RNVC: 2
F300 0T 025 2085: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-531-2142
Access Cover

145312142
341A61-2037-20: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-338-1375
Bow Handle

143381375
NO PRIMARY REF14-338-1375: RNCC: 3 | RNVC: 2
S273840-2: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-14-546-9938
Loop Clamp

145469938
NSA935807-3-18: RNCC: 3 | RNVC: 2

12 Sep 2005

5340-14-222-6467
Strap Fastener Loop

142226467
2229-6-208: RNCC: 3 | RNVC: 2
2229-6-208: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-468-9228
Retaining Band

144689228
U.46-2A: RNCC: 3 | RNVC: 2
0079180: RNCC: 5 | RNVC: 2
0714 57 13: RNCC: 5 | RNVC: 2
U46-2A: RNCC: 5 | RNVC: 2
3148510701806: RNCC: 5 | RNVC: 2
U 46 2 A: RNCC: 5 | RNVC: 2

29 Mar 1994

5340-14-277-7637
Bumper

142777637
M208-30025: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-438-4585
Sliding Door Track

144384585
332A22-1430-43: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-389-9238
Buckle

143899238
34201-160-020: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-411-8882
Angle Bracket

144118882
M397-02-10-05-13: RNCC: 3 | RNVC: 2
453-80557-000: RNCC: 3 | RNVC: 2

10 Sep 1986

5340-14-438-4853
Metal Grille

144384853
332A61-2346-06: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-286-5100
Angle Bracket

142865100
341A52-1005-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-286-5095
Lock Bolt

142865095
341A25-1069-01: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-299-9876
Buckle

142999876
32114-035: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-455-4973
Retaining Bail

144554973
J05555-11-0910P009: RNCC: 3 | RNVC: 2

21 May 1992

5340-14-341-1692
Loop Clamp

143411692
M3C701-395: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-326-2036
Retaining Strap

143262036
J00650-01-0100P014: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-224-0202
Handwheel

142240202
GSM137-001F8DET2SANSB0ULEAS10G: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-465-2804
Blank Panel

144652804
365A61-5410-55: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-521-1665
Mounting Plate

145211665
23306123-0: RNCC: 3 | RNVC: 2

12 Jul 2000

5340-14-283-0400
Bumper

142830400
2-06064: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-479-0056
Mounting Bracket

144790056
45525901: RNCC: 3 | RNVC: 2
45525901: RNCC: 5 | RNVC: 9

6 Dec 1995

5340-14-556-6198
Utility Guard Rail Section

145566198
RAM-Q090875A0V: RNCC: 3 | RNVC: 2

28 Mar 2008

5340-14-303-3004
Strap Fastener Loop

143033004
000774007P: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-263-8815
Bridge Clamp

142638815
17-7-6464: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-412-9725
Retaining Strap

144129725
M3E561-66-01: RNCC: 3 | RNVC: 2

5 Nov 1986

5340-14-517-3665
Protection Bellows

145173665
271-00-015: RNCC: 3 | RNVC: 2

8 Dec 1999

5340-14-463-9062
Loop Clamp

144639062
F0143-009F18TAB1DE13,72: RNCC: 3 | RNVC: 2
F0143-009F18TAB1DE14: RNCC: 3 | RNVC: 2
MAT169-0007F4: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-14-291-2293
Mending Plate

142912293
23020926: RNCC: 3 | RNVC: 2
23020926-8: RNCC: 5 | RNVC: 2
EA51-9227: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-402-6397
Clamping Catch

144026397
4156-3000: RNCC: 3 | RNVC: 2
602548: RNCC: 5 | RNVC: 2
4156-30: RNCC: 5 | RNVC: 2
F300 0T 018 1491: RNCC: 6 | RNVC: 9

19 Jul 1985

5340-14-503-2859
Angle Bracket

145032859
332A58-2030-20: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-402-0818
Access Cover

144020818
400250: RNCC: 3 | RNVC: 2
BGE400250: RNCC: 5 | RNVC: 2

26 Jun 1985

5340-14-487-5001
Access Cover

144875001
10224047: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-527-1645
Access Cover

145271645
805069: RNCC: 3 | RNVC: 2

10 Oct 2001

5340-14-415-4947
Retaining Strap

144154947
PDP0238: RNCC: 3 | RNVC: 2

18 May 1987

5340-14-277-7953
Retaining Clip

142777953
12504005: RNCC: 3 | RNVC: 2
12504005: RNCC: 3 | RNVC: 9

1 Jan 1971

5340-14-532-1350
Mounting Plate

145321350
5010559910: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-14-476-2631
Butt Hinge

144762631
2-46315: RNCC: 3 | RNVC: 2

31 May 1995

5340-14-525-7870
Mounting Bracket

145257870
F145050: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-381-1999
Rod End Connector

143811999
39612: RNCC: 3 | RNVC: 2
00039612: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-540-7227
Access Cover

145407227
38051536: RNCC: 3 | RNVC: 2
ND064822: RNCC: 5 | RNVC: 2
4848ZG8613181300: RNCC: 6 | RNVC: 9

22 Apr 2004

5340-14-505-3733
Access Cover

145053733
1002300301: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-431-5302
Rod End Clevis

144315302
P0074: RNCC: 3 | RNVC: 2
T200ES14X28: RNCC: 5 | RNVC: 9

24 Apr 1989

5340-14-488-6627
Access Cover

144886627
38222957: RNCC: 3 | RNVC: 2
38222957: RNCC: 5 | RNVC: 9

28 May 1997

5340-14-496-5035
Access Cover

144965035
549975: RNCC: 3 | RNVC: 2
F300 0T 021 6056: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-500-5389
Rod End Clevis

145005389
596: RNCC: 3 | RNVC: 2
F300 0T 024 5565: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-313-7543
Access Cover

143137543
0064870250: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-404-6606
Flush Catch Claw

144046606
5172006300: RNCC: 3 | RNVC: 2
720063: RNCC: 5 | RNVC: 9

20 Nov 1985

5340-14-528-5202
Clamp Bolt Assembly

145285202
SZ00.702.291: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-522-1626
Bail Handle

145221626
PR303PN: RNCC: 3 | RNVC: 2

5 Oct 2000

5340-14-351-5878
Retaining Strap

143515878
0000136125: RNCC: 3 | RNVC: 2
0000136125: RNCC: 5 | RNVC: 9
136125: RNCC: 5 | RNVC: 9

12 Sep 1978

5340-14-448-6161
Bow Handle

144486161
16982518: RNCC: 3 | RNVC: 2
16982518: RNCC: 5 | RNVC: 2

4 Jul 1991

5340-14-524-2075
Mounting Bracket

145242075
4201738P018: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-400-8929
Control Rod

144008929
GAM051150001: RNCC: 3 | RNVC: 2

21 May 1985

5340-14-528-1276
Metal Grille

145281276
MB3727A00: RNCC: 3 | RNVC: 2

19 Dec 2001

5340-14-444-5122
Mounting Bracket

144445122
123010326: RNCC: 3 | RNVC: 9

14 Jan 1991

5340-14-222-6715
Expansion Plug

142226715
351855: RNCC: 3 | RNVC: 2
0000011196: RNCC: 5 | RNVC: 2
0000011196: RNCC: 5 | RNVC: 9
11196: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-415-4956
Retaining Strap

144154956
PDP0274: RNCC: 3 | RNVC: 2

18 May 1987

5340-14-457-8550
Angle Bracket

144578550
238300: RNCC: 3 | RNVC: 2

24 Sep 1992

5340-14-516-1370
Mounting Bracket

145161370
47174910: RNCC: 3 | RNVC: 2

13 Sep 1999

5340-14-224-8830
Bumper

142248830
GSM1674A34: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-228-9165
Retaining Clip

142289165
1038: RNCC: 3 | RNVC: 2
90180033: RNCC: 5 | RNVC: 2
437834: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-484-9040
Metal Grille

144849040
190304-614: RNCC: 3 | RNVC: 9

12 Dec 1996

5340-14-250-9360
Loop Clamp

142509360
C4913: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-313-7429
Mounting Bracket

143137429
0257850440: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-549-8880
Bumper

145498880
31101819: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-552-1728
Mounting Bracket

145521728
10599968: RNCC: 3 | RNVC: 2

30 Nov 2006

5340-14-433-8554
Corner Brace

144338554
556230: RNCC: 3 | RNVC: 2

17 Aug 1989

5340-14-577-7333
Utility Resilient Mount

145777333
82714884000: RNCC: 3 | RNVC: 2

8 Oct 2013

5340-14-529-6969
Mounting Bracket

145296969
10097931: RNCC: 3 | RNVC: 2

4 Apr 2002

5340-14-555-7139
Mounting Plate

145557139
0177550470: RNCC: 3 | RNVC: 2

10 Dec 2007

5340-14-465-0222
Runner

144650222
MB1609F00: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-508-0783
Mounting Bracket

145080783
4773921460: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-334-4968
Webbing Strap

143344968
120592: RNCC: 3 | RNVC: 2
MAF0001002834: RNCC: 6 | RNVC: 9

1 Jun 1976

5340-14-496-6287
Mounting Bracket

144966287
20300077: RNCC: 3 | RNVC: 2
F300 0T 021 8178: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-307-9724
Runner

143079724
26426961: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-445-7010
Bridge Clamp

144457010
PEN91P804CI782: RNCC: 3 | RNVC: 2

20 Feb 1991

5340-14-384-7709
Mounting Plate

143847709
16762728: RNCC: 3 | RNVC: 2
16762728: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-369-2392
Pipe Hanger

143692392
303-190-001-0: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-378-9128
Runner

143789128
110045230: RNCC: 3 | RNVC: 2
5000526267: RNCC: 5 | RNVC: 2
5000526267: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-14-311-3673
Webbing Strap

143113673
AL48-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-442-6792
Corner Brace

144426792
OUT5510-4: RNCC: 3 | RNVC: 2
0UT5510-4: RNCC: 5 | RNVC: 2

24 Oct 1990

5340-14-416-4430
Screw Hook

144164430
0805349T00: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-14-446-0157
Rod End Clevis

144460157
3450040MI: RNCC: 3 | RNVC: 2

4 Mar 1991

5340-14-500-6234
Section Block Clamp

145006234
E64009998132: RNCC: 3 | RNVC: 2
F300 0T 024 6418: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-526-8706
Utility Access Door

145268706
1SH41784350: RNCC: 3 | RNVC: 2

12 Sep 2001

5340-14-500-9167
Clamping Catch

145009167
MX7050: RNCC: 3 | RNVC: 2
MX 7050: RNCC: 5 | RNVC: 2
F300 0T 024 9376: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-516-3841
Plug Button

145163841
ST20107: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-520-8964
Access Cover

145208964
TRAPP01854X00: RNCC: 3 | RNVC: 2

21 Jun 2000

5340-14-305-7977
Access Cover

143057977
446C66513H1DET2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-531-8569
Access Cover

145318569
19A1753: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-14-402-6841
Anchor Strap

144026841
535823: RNCC: 3 | RNVC: 2

19 Jul 1985

5340-14-512-5642
Utility Access Door

145125642
S8576707: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-520-0714
Access Cover

145200714
47134933: RNCC: 3 | RNVC: 2

10 May 2000

5340-14-392-9266
Access Cover

143929266
0003311187: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-540-7391
Access Cover

145407391
38052169: RNCC: 3 | RNVC: 2
9500001013: RNCC: 5 | RNVC: 2
4848ZG8613181598: RNCC: 6 | RNVC: 9

23 Apr 2004

5340-14-430-4081
Rod End Clevis

144304081
933450REP18: RNCC: 3 | RNVC: 2

20 Mar 1989

5340-14-521-5876
Access Cover

145215876
20636957: RNCC: 3 | RNVC: 2

23 Aug 2000

5340-14-427-5053
Retaining Strap

144275053
AE/BT33142: RNCC: 3 | RNVC: 2
5172234400: RNCC: 3 | RNVC: 2
33142: RNCC: 5 | RNVC: 2
722344: RNCC: 5 | RNVC: 9

20 Oct 1988

5340-14-386-4645
Rod End Clevis

143864645
DA1D227107002: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-497-4145
Utility Access Door

144974145
1031400: RNCC: 3 | RNVC: 2
1031400: RNCC: 5 | RNVC: 2
F300 0T 023 1441: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-439-6863
Access Cover

144396863
16293759: RNCC: 3 | RNVC: 2
16293759: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-380-1321
Access Cover

143801321
1106254401: RNCC: 3 | RNVC: 2
62544: RNCC: 5 | RNVC: 2

8 Nov 1982

5340-14-520-8062
Access Cover

145208062
0390501015: RNCC: 3 | RNVC: 2
0390501015: RNCC: 3 | RNVC: 2

14 Jun 2000

5340-14-425-0985
Access Cover

144250985
0847178G00: RNCC: 3 | RNVC: 2

21 Jun 1988

5340-14-411-8616
Access Cover

144118616
110711: RNCC: 3 | RNVC: 2

10 Sep 1986

5340-14-535-0671
Utility Access Door

145350671
02000063: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-14-512-0351
Access Cover

145120351
0060237: RNCC: 3 | RNVC: 2

3 Feb 1999

5340-14-543-5754
Mounting Bracket

145435754
E0708G1C: RNCC: 1 | RNVC: 2
E0708G1C: RNCC: 3 | RNVC: 2
E0708G1C: RNCC: 5 | RNVC: 2
ASNE0708G1C: RNCC: 5 | RNVC: 2

23 Nov 2004

5340-14-528-3832
Access Cover

145283832
01604418: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-14-404-6579
Access Cover

144046579
5171568400: RNCC: 3 | RNVC: 2
715684: RNCC: 5 | RNVC: 2

20 Nov 1985

5340-14-529-0758
Access Cover

145290758
706880: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-14-381-4031
Anchor Strap

143814031
227599: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-500-3667
Access Cover

145003667
D61502000005: RNCC: 3 | RNVC: 2
F300 0T 024 3767: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-392-8594
Access Cover

143928594
225192: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-321-0126
Access Cover

143210126
15704649: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-501-9046
Access Cover

145019046
1030430039: RNCC: 3 | RNVC: 2
1030430039: RNCC: 5 | RNVC: 2

19 Nov 1997

5340-14-448-1143
Corner Brace

144481143
0120721006: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-474-1052
Mounting Bracket

144741052
4771553940: RNCC: 3 | RNVC: 2
313394: RNCC: 5 | RNVC: 2

25 Jan 1995

5340-14-365-5294
Bow Handle

143655294
16505652: RNCC: 3 | RNVC: 2
16505652: RNCC: 5 | RNVC: 2
16505652: RNCC: 5 | RNVC: 9

19 Sep 1980

5340-14-511-0808
Lock Bolt

145110808
2450107: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-14-372-1851
Access Cover

143721851
41745: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-303-4316
Access Cover

143034316
170518: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-341-1456
Access Cover

143411456
205304: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-525-9608
Access Cover

145259608
MC2831F00: RNCC: 3 | RNVC: 2

20 Jun 2001

5340-14-422-2752
Loop Clamp

144222752
25FE26: RNCC: 3 | RNVC: 2
NSA5516-29NV: RNCC: 5 | RNVC: 2
NSA5516-29NV: RNCC: 5 | RNVC: 2
PF14-3CV26: RNCC: 5 | RNVC: 9

24 Feb 1988

5340-14-369-3230
Retaining Strap

143693230
366A84-0125-20: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-284-4397
Rod End Clevis

142844397
6114-3097: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-238-3449
Retaining Strap

142383449
NO PRIMARY REF14-238-3449: RNCC: 3 | RNVC: 2
163688: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-438-4558
Door Handle

144384558
332A22-1356-09: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-354-1965
Anchor Strap

143541965
5246-09: RNCC: 3 | RNVC: 2

30 Jan 1979

5340-14-474-0366
Access Cover

144740366
3086-101/K1020: RNCC: 3 | RNVC: 2
00190225: RNCC: 5 | RNVC: 9

24 Jan 1995

5340-14-525-3298
Mounting Bracket

145253298
703A94-0000-24: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-349-9202
Webbing Strap

143499202
6511-08012: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-041-9966
Pipe Hanger

140419966
121E47-410-17-0: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-256-7579
Angle Bracket

142567579
4H002300-00: RNCC: 3 | RNVC: 2
4H002300-00: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-339-2831
Expansion Plug

143392831
7562087000: RNCC: 3 | RNVC: 2
70-56-208-700: RNCC: 5 | RNVC: 9

18 Jan 1977

5340-14-389-1476
Butt Hinge

143891476
L794BV00-046: RNCC: 3 | RNVC: 2
L794BV00046: RNCC: 5 | RNVC: 2

29 Nov 1983

5340-14-287-1631
Slide Keeper

142871631
NT41-02FEV54M26X14X40: RNCC: 2 | RNVC: 2
NO PRIMARY REF14-287-1631: RNCC: 3 | RNVC: 2
25L0URD: RNCC: 5 | RNVC: 9
26X14X40: RNCC: 5 | RNVC: 9
NT41-02FEV54M26X14X40: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-533-9022
Mounting Bracket

145339022
SZ08.850.153: RNCC: 3 | RNVC: 2
08-850-153: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-464-3498
Angle Bracket

144643498
705807-00: RNCC: 3 | RNVC: 2
89297827: RNCC: 5 | RNVC: 2

28 Jul 1993

5340-14-370-6795
Loop Clamp

143706795
20-01-193: RNCC: 3 | RNVC: 2
20-01-193: RNCC: 3 | RNVC: 9

5 Jun 1981

5340-14-468-9355
Rod End Clevis

144689355
207/91-31-03-01-06: RNCC: 3 | RNVC: 2
RAB3161: RNCC: 5 | RNVC: 2

30 Mar 1994

5340-14-404-0398
Angle Bracket

144040398
366A21-1243-3301: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-520-5857
Metal Grille

145205857
35-25-227: RNCC: 3 | RNVC: 2

24 May 2000

5340-14-356-7876
Loop Clamp

143567876
CIB1-001: RNCC: 3 | RNVC: 2

15 May 1979

5340-14-516-2287
Mounting Plate

145162287
1904-19: RNCC: 3 | RNVC: 2
0031899: RNCC: 3 | RNVC: 2

15 Sep 1999

5340-14-224-0189
Handwheel

142240189
GSM137-001F7DET2SANSB0ULEAS10G: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-373-8205
Rim Lock Set

143738205
NO PRIMARY REF14-373-8205: RNCC: 3 | RNVC: 2
6600-04MNFH010: RNCC: 5 | RNVC: 9

13 Nov 1981

5340-14-369-1978
Angle Bracket

143691978
160-632014-55: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-333-4667
Mending Plate

143334667
262-11-88010-35: RNCC: 3 | RNVC: 2
85-800-4080: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-347-1478
Retaining Strap

143471478
3160S73-37-615: RNCC: 3 | RNVC: 2
85-689-4080: RNCC: 6 | RNVC: 9

19 Jan 1978

5340-14-495-4251
Bow Handle

144954251
L85209-1: RNCC: 3 | RNVC: 2
L852091: RNCC: 5 | RNVC: 2
F300 0T 019 2436: RNCC: 6 | RNVC: 9
F300 0T 025 1724: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-472-8739
Cover Strip

144728739
332A25-1284-20: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-442-8836
Eye Hook

144428836
16-040-02-007: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-533-6028
Dashpot Piston

145336028
708010S412-14A: RNCC: 3 | RNVC: 2

12 Feb 2003

5340-14-553-1612
Mounting Plate

145531612
0249961060: RNCC: 3 | RNVC: 2

8 Mar 2007

5340-14-537-7325
Mounting Bracket

145377325
PCS223: RNCC: 3 | RNVC: 2

19 Nov 2003

5340-14-291-3967
Angle Bracket

142913967
0235227550: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-456-8044
Mounting Bracket

144568044
306717: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-14-433-7704
Butt Hinge

144337704
RP901894: RNCC: 3 | RNVC: 2

9 Aug 1989

5340-14-571-2189
Coating Plate

145712189
S257A2361208: RNCC: 3 | RNVC: 2

29 Feb 2012

5340-14-399-7025
Retaining Strap

143997025
313523: RNCC: 3 | RNVC: 2
313523: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-535-1827
Mounting Bracket

145351827
5000495495: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-513-3225
Butt Hinge

145133225
H116185C: RNCC: 3 | RNVC: 2

15 Mar 1999

5340-14-541-5454
Mounting Bracket

145415454
31101818: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-357-1455
Angle Bracket

143571455
A11A231460180: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-394-9122
Mounting Plate

143949122
20731911: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-379-7618
Doorknob

143797618
BAZ2847: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-266-4585
Angle Bracket

142664585
450625: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-403-0456
Mounting Plate

144030456
29739146: RNCC: 3 | RNVC: 2
29739146: RNCC: 5 | RNVC: 9

25 Jul 1985

5340-14-425-5814
Mending Plate

144255814
27116982-3: RNCC: 3 | RNVC: 2

9 Jul 1988

5340-14-490-0871
Mounting Plate

144900871
29400170: RNCC: 3 | RNVC: 2

10 Sep 1997

5340-14-502-7328
Expansion Shield

145027328
3C8388: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-482-4191
Angle Bracket

144824191
78721DH29-1: RNCC: 3 | RNVC: 2

11 Jul 1996

5340-14-451-9445
Angle Bracket

144519445
007567010P: RNCC: 3 | RNVC: 2

12 Dec 1991

5340-14-524-3428
Plug Button

145243428
99.A124.4D.D: RNCC: 3 | RNVC: 9

14 Mar 2001

5340-14-498-1952
Access Cover

144981952
12440CBA27-3: RNCC: 3 | RNVC: 2
91923066: RNCC: 3 | RNVC: 2
F300 0T 004 5515: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-382-9617
Retaining Strap

143829617
BAZ97102: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-416-5069
Loop Clamp

144165069
320-564-701-0: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-14-474-8926
Flush Catch Claw

144748926
10344779: RNCC: 3 | RNVC: 2

8 Mar 1995

5340-14-427-5930
Plug Button

144275930
1365700101-8: RNCC: 3 | RNVC: 2
DAH1365700101-8: RNCC: 5 | RNVC: 2

22 Oct 1988

5340-14-354-8853
Bumper

143548853
2000100-9-9: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-417-3158
Webbing Strap

144173158
253791-2: RNCC: 3 | RNVC: 2
253791-2: RNCC: 5 | RNVC: 9

1 Jul 1987

5340-14-427-4239
Butt Hinge

144274239
0025083W/7: RNCC: 3 | RNVC: 2

19 Oct 1988

5340-14-388-6113
Mending Plate

143886113
036335: RNCC: 3 | RNVC: 2
MBEU4504DP: RNCC: 5 | RNVC: 2
MBEU4504DP: RNCC: 5 | RNVC: 2

3 Nov 1983

5340-14-479-5133
Mounting Bracket

144795133
23626554-6: RNCC: 3 | RNVC: 2

17 Jan 1996

5340-14-546-1147
Mounting Bracket

145461147
19050158: RNCC: 3 | RNVC: 2
19050158: RNCC: 5 | RNVC: 2

14 Jun 2005

5340-14-250-6697
Retaining Strap

142506697
FL146533: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-318-3132
Mending Plate

143183132
26-810040-8: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-480-2390
Mounting Plate

144802390
10057310: RNCC: 3 | RNVC: 2

28 Feb 1996

5340-14-553-2211
Bumper

145532211
00235043: RNCC: 3 | RNVC: 2

15 Mar 2007

5340-14-547-8900
Bail Handle

145478900
GA024457Y01: RNCC: 3 | RNVC: 2

22 Nov 2005

5340-14-548-6075
Angle Bracket

145486075
RA1B702346137: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-360-2561
Angle Bracket

143602561
NO PRIMARY REF14-360-2561: RNCC: 3 | RNVC: 2
60908: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-481-0647
Rod End Clevis

144810647
1302220P006: RNCC: 3 | RNVC: 2

18 Apr 1996

5340-14-333-5389
Access Cover

143335389
45348: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-479-3596
Mounting Plate

144793596
23626408-1: RNCC: 3 | RNVC: 2

10 Jan 1996

5340-14-425-6716
Threaded Rod End

144256716
918516: RNCC: 3 | RNVC: 2

21 Jul 1988

5340-14-217-1114
Retaining Strap

142171114
5251-4: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-391-6227
Loop Clamp

143916227
20188708: RNCC: 3 | RNVC: 2
20188708: RNCC: 5 | RNVC: 9

21 Mar 1984

5340-14-392-6516
Webbing Strap

143926516
102864: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-514-6625
Door Closer Dog

145146625
85873: RNCC: 3 | RNVC: 2

7 Jun 1999

5340-14-392-9773
Butt Hinge

143929773
0000768877: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-514-5103
Mounting Plate

145145103
203507: RNCC: 3 | RNVC: 2

26 May 1999

5340-14-523-1309
Mounting Bracket

145231309
10567172: RNCC: 3 | RNVC: 2

8 Jan 2001

5340-14-311-2482
Loop Clamp

143112482
2-087177-5: RNCC: 3 | RNVC: 2
2-087177-5: RNCC: 5 | RNVC: 9
87177: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-494-8400
Retaining Clip

144948400
NO PRIMARY REF14-494-8400: RNCC: 3 | RNVC: 2
5517-094: RNCC: 5 | RNVC: 9
5517094: RNCC: 5 | RNVC: 9
5517-094: RNCC: 5 | RNVC: 9
F300 0T 018 4091: RNCC: 6 | RNVC: 9
F300 0T 017 9690: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-352-0442
T Plate

143520442
319A73-70-012: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-309-0927
Runner

143090927
NO PRIMARY REF14-309-0927: RNCC: 3 | RNVC: 2
IMS500-19D4DR0ITE: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-476-1590
Mounting Plate

144761590
207317002: RNCC: 3 | RNVC: 2
PAA73-17-002: RNCC: 5 | RNVC: 2

24 May 1995

5340-14-344-7840
Pipe Hanger

143447840
0249967590: RNCC: 3 | RNVC: 2
85-800-4861: RNCC: 6 | RNVC: 9

9 Sep 1977

5340-14-383-3716
Access Cover

143833716
3511 191 32211: RNCC: 3 | RNVC: 2
3511 191 32211: RNCC: 5 | RNVC: 2
3511-191-32211: RNCC: 5 | RNVC: 2

11 Apr 1983

5340-14-571-2476
Utility Resilient Mount

145712476
MP8-230: RNCC: 3 | RNVC: 2

6 Mar 2012

5340-14-398-6418
Webbing Strap

143986418
E30-10M: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-290-2705
Angle Bracket

142902705
330A32-5039-01: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-528-2040
Loop Clamp

145282040
ASNA0021-31G04: RNCC: 1 | RNVC: 2
313100402: RNCC: 3 | RNVC: 2
ASNA0021-31G04: RNCC: 3 | RNVC: 2
A0021-31G04: RNCC: 5 | RNVC: 2
ASNA0021-31G04: RNCC: 5 | RNVC: 2
Y31G04: RNCC: 5 | RNVC: 2
A0021-31G04: RNCC: 5 | RNVC: 2

9 Jan 2002

5340-14-449-4017
Swivel Caster

144494017
135-181PBXR: RNCC: 3 | RNVC: 9
MPR135-181PBXR: RNCC: 5 | RNVC: 9

7 Aug 1991

5340-14-411-2496
Loop Clamp

144112496
51313105024: RNCC: 3 | RNVC: 2
21G24: RNCC: 5 | RNVC: 2
A0021-21G24: RNCC: 5 | RNVC: 2
ASNA0021-21G24: RNCC: 5 | RNVC: 2

6 Aug 1986

5340-14-571-2784
Utility Resilient Mount

145712784
76Y-23032000: RNCC: 3 | RNVC: 2

8 Mar 2012

5340-14-517-7874
Mounting Bracket

145177874
117040: RNCC: 3 | RNVC: 2
117040-SAV: RNCC: 3 | RNVC: 2
117041: RNCC: 5 | RNVC: 2
IF232-220: RNCC: 5 | RNVC: 9
(241)AC853117040: RNCC: 8 | RNVC: 2
117040: RNCC: 8 | RNVC: 2

13 Jan 2000

5340-14-282-5617
Mending Plate

142825617
104011-01: RNCC: 3 | RNVC: 2
104011: RNCC: 5 | RNVC: 2
104011: RNCC: 5 | RNVC: 9
104011-01: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-359-2864
Mending Plate

143592864
L04: RNCC: 3 | RNVC: 2
L1001-4: RNCC: 5 | RNVC: 2

2 Oct 1979

5340-14-489-4720
Loop Clamp

144894720
26155000150: RNCC: 3 | RNVC: 2
45600917: RNCC: 3 | RNVC: 2
4-560091-7: RNCC: 5 | RNVC: 2
F300 0T 022 7652: RNCC: 6 | RNVC: 9

23 Jul 1997

5340-14-324-1111
Runner

143241111
211MA0022R1REP33-2: RNCC: 3 | RNVC: 2
211MA022R1REP33-2: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-452-8668
Key Blank

144528668
CLEP0URSERRURE911-220C: RNCC: 3 | RNVC: 2
91615030: RNCC: 5 | RNVC: 2

22 Jan 1992

5340-14-457-2576
Mounting Plate

144572576
402193A-SG10137-Z2CND17-12: RNCC: 3 | RNVC: 2

20 Aug 1992

5340-14-300-0048
Mending Plate

143000048
NO PRIMARY REF14-300-0048: RNCC: 3 | RNVC: 2
1212011: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-291-1174
Handwheel

142911174
D1010-331: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-526-8127
Padlock

145268127
02021901: RNCC: 3 | RNVC: 2
CITY20: RNCC: 5 | RNVC: 2
91739107: RNCC: 5 | RNVC: 2

7 Sep 2001

5340-14-483-0144
Flush Catch Claw

144830144
PM1A713310421: RNCC: 3 | RNVC: 2
PM1A713310421: RNCC: 5 | RNVC: 2

1 Aug 1996

5340-14-387-2141
Angle Bracket

143872141
5000607131: RNCC: 3 | RNVC: 2
5000607131: RNCC: 5 | RNVC: 9

15 Sep 1983

5340-14-365-7381
Runner

143657381
43229-2: RNCC: 3 | RNVC: 2

8 Oct 1980

5340-14-254-2909
Loop Clamp

142542909
51113105023: RNCC: 3 | RNVC: 2
253102300: RNCC: 5 | RNVC: 2
25G23: RNCC: 5 | RNVC: 2
Z00.N7141290004: RNCC: 5 | RNVC: 2
25G23: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-444-7051
Bumper

144447051
39538920: RNCC: 3 | RNVC: 2
39538920: RNCC: 5 | RNVC: 9
6126: RNCC: 5 | RNVC: 9

16 Jan 1991

5340-14-465-8897
Mounting Plate

144658897
120069-181: RNCC: 3 | RNVC: 9
91720147: RNCC: 5 | RNVC: 2

14 Oct 1993

5340-14-447-8219
Runner

144478219
96157483: RNCC: 3 | RNVC: 2

6 Jun 1991

5340-14-484-5964
Threaded Rod End

144845964
8000098T00: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-397-7202
Butt Hinge

143977202
4003-40X2000INOX: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-518-4119
Mounting Plate

145184119
3424456: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-14-439-6731
Casement Fastener

144396731
16316402: RNCC: 3 | RNVC: 2
16316402: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-461-7677
Access Cover

144617677
4772820640: RNCC: 3 | RNVC: 2
5046097: RNCC: 5 | RNVC: 9

24 Mar 1993

5340-14-491-2317
Access Cover

144912317
616039: RNCC: 3 | RNVC: 2
F300 0T 001 9475: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-505-2360
Access Cover

145052360
15456323: RNCC: 3 | RNVC: 2

16 Mar 1998

5340-14-517-6206
Plug Button

145176206
RA1M228710040A1: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-524-9824
Flush Lock

145249824
51282+51284+51360: RNCC: 3 | RNVC: 2
SYB2802: RNCC: 5 | RNVC: 2

10 May 2001

5340-14-479-4470
Mounting Bracket

144794470
0601710-2: RNCC: 3 | RNVC: 2

10 Jan 1996

5340-14-479-5785
Access Cover

144795785
23243932-7: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-14-295-3889
Access Cover

142953889
1611-5: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-452-1245
Casement Fastener

144521245
0185105310: RNCC: 3 | RNVC: 2
89436470: RNCC: 5 | RNVC: 2

18 Dec 1991

5340-14-545-3667
Blank Panel

145453667
4759-9912: RNCC: 3 | RNVC: 2

8 Apr 2005

5340-14-535-4226
Bumper

145354226
5430113792: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-528-7242
Mounting Bracket

145287242
1MP50133292: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-14-545-1819
Mounting Bracket

145451819
S711A7012210: RNCC: 3 | RNVC: 2

23 Mar 2005

5340-14-546-5733
Angle Bracket

145465733
MP1888F01: RNCC: 3 | RNVC: 2

20 Jul 2005

5340-14-545-2727
Loop Clamp

145452727
EN4113S50WR: RNCC: 2 | RNVC: 2

31 Mar 2005

5340-14-523-1891
Mounting Bracket

145231891
5617196A: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-312-8318
Mounting Bracket

143128318
0249857810: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-350-9223
Fusible Plug

143509223
6712F1F6REP2ET3: RNCC: 2 | RNVC: 2

12 Jul 1978

5340-14-451-5094
Mounting Bracket

144515094
537026: RNCC: 3 | RNVC: 2

21 Nov 1991

5340-14-464-9748
Pad Eye

144649748
365A67-8155-00: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-290-8644
Snap Hook

142908644
34103: RNCC: 3 | RNVC: 9
34103-50: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-441-7061
Loop Clamp

144417061
53286-14: RNCC: 3 | RNVC: 2
53286-14: RNCC: 5 | RNVC: 9

12 Sep 1990

5340-14-464-3841
Filler Opening Cap

144643841
908D40-3: RNCC: 3 | RNVC: 2
908D40-3: RNCC: 5 | RNVC: 2
908D40-3: RNCC: 5 | RNVC: 9

28 Jul 1993

5340-14-357-0655
Clamping Catch

143570655
16-7-3480: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-457-4340
Mounting Plate

144574340
50-65-1: RNCC: 3 | RNVC: 2
89467771: RNCC: 5 | RNVC: 2

3 Sep 1992

5340-14-468-6783
Mounting Plate

144686783
A80504-2: RNCC: 3 | RNVC: 2

16 Mar 1994

5340-14-349-3483
Angle Bracket

143493483
16398846: RNCC: 3 | RNVC: 2
16398846: RNCC: 3 | RNVC: 9

22 May 1978

5340-14-453-6999
Mounting Bracket

144536999
TH20K945-2: RNCC: 3 | RNVC: 2

5 Mar 1992

5340-14-321-6978
Quick Release Pin

143216978
191529: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-393-4215
Rod End Clevis

143934215
2-20281: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-307-4395
Rod End Connector

143074395
1-7005: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-439-3640
Angle Bracket

144393640
DA2C612025932: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-445-8887
Bridge Clamp

144458887
39959486: RNCC: 3 | RNVC: 2
39959486: RNCC: 5 | RNVC: 9

27 Feb 1991

5340-14-530-6017
Rod End Connector

145306017
1-215-698: RNCC: 3 | RNVC: 2
1-215-698: RNCC: 5 | RNVC: 9

26 Jun 2002

5340-14-547-8970
Eye Hook

145478970
SA2677: RNCC: 3 | RNVC: 2

23 Nov 2005

5340-14-466-9176
Mounting Bracket

144669176
2065B117-1: RNCC: 3 | RNVC: 2
2065B117REP1: RNCC: 5 | RNVC: 2

9 Dec 1993

5340-14-551-8740
Casement Fastener

145518740
43043108: RNCC: 3 | RNVC: 2
43043108: RNCC: 3 | RNVC: 9

6 Nov 2006

5340-14-554-1759
Mounting Bracket

145541759
82090755001: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-403-3402
Bumper

144033402
9109-11: RNCC: 3 | RNVC: 2
7920059436: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-382-9252
Case Corner

143829252
4770202220: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-212-1525
Loop Holder

142121525
70374969: RNCC: 3 | RNVC: 2
70374969: RNCC: 5 | RNVC: 9
85-691-1837: RNCC: 6 | RNVC: 9

5 Jul 1980

5340-14-410-2761
Access Cover

144102761
0400-115-009: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-14-406-2078
Lock-Release Lever

144062078
IF037-159: RNCC: 3 | RNVC: 9

8 Jan 1986

5340-14-532-5065
Mounting Bracket

145325065
42-725-008: RNCC: 3 | RNVC: 2
SZ42.725.008: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-14-310-6288
Mending Plate

143106288
15890-103001: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-369-2778
Synchro Clamp

143692778
S2189-1DG: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-326-2063
Mending Plate

143262063
J00650-01-0430P004: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-468-3070
Loop Clamp

144683070
LB1-8PP: RNCC: 3 | RNVC: 2
AQAL13574: RNCC: 5 | RNVC: 2
RAB2756: RNCC: 5 | RNVC: 2
L13574: RNCC: 5 | RNVC: 2
L13574: RNCC: 5 | RNVC: 2

18 Feb 1994

5340-14-297-4592
Bow Handle

142974592
508-400C0MPLET: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-389-5042
Retaining Strap

143895042
365A69-2014-00: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-306-3596
Threaded Rod End

143063596
013328-01: RNCC: 3 | RNVC: 9
0851586000: RNCC: 5 | RNVC: 2
0851586000: RNCC: 5 | RNVC: 9
851586000: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-495-6476
Access Cover

144956476
U43233-97: RNCC: 3 | RNVC: 2
F300 0T 019 5756: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-362-1232
Rim Latch

143621232
LN416-037REP4A7: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-328-5995
Butt Hinge

143285995
321A58-0008-70: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-554-1764
Retaining Strap

145541764
CCN301-850-431A1: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-514-5377
Mounting Plate

145145377
EB047-32-101: RNCC: 3 | RNVC: 2
EB047-32-101: RNCC: 5 | RNVC: 2

26 May 1999

5340-14-465-5645
Access Cover

144655645
R183-13: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-383-5871
Pipe Hanger

143835871
366A27-3613-24: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-264-1741
Loop Clamp

142641741
55218-304B407DB: RNCC: 3 | RNVC: 2
55218-304-002DB: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-336-2221
Angle Bracket

143362221
3160S25-20-021: RNCC: 3 | RNVC: 2
85-100-2986: RNCC: 6 | RNVC: 9

24 Jul 1976

5340-14-343-2369
Rod End Clevis

143432369
GA56677-10: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-471-5609
Mounting Bracket

144715609
22553-000-00: RNCC: 3 | RNVC: 2
Z00.N7788262553: RNCC: 5 | RNVC: 2
Z00.N7788262553TBM: RNCC: 5 | RNVC: 9

31 Aug 1994

5340-14-431-5052
Angle Bracket

144315052
160G722016-38: RNCC: 3 | RNVC: 2

19 Apr 1989

5340-14-400-0821
Retaining Band

144000821
211756: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-351-9753
Mending Plate

143519753
BY148A10194: RNCC: 3 | RNVC: 2
BFC10194: RNCC: 5 | RNVC: 2
BFC20194: RNCC: 5 | RNVC: 2

16 Oct 1978

5340-14-364-1538
Clamping Catch

143641538
487789: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-542-1569
Mounting Plate

145421569
3TP015101RD50: RNCC: 3 | RNVC: 2
3003372: RNCC: 5 | RNVC: 2

8 Jul 2004

5340-14-537-3232
Mounting Plate

145373232
D05-3606: RNCC: 3 | RNVC: 2

20 Oct 2003

5340-14-437-4028
Mounting Bracket

144374028
NO PRIMARY REF14-437-4028: RNCC: 3 | RNVC: 2
754-432-00: RNCC: 5 | RNVC: 9

31 Jan 1990

5340-14-502-8179
Mounting Bracket

145028179
9R1106: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-539-7702
Mounting Bracket

145397702
375470U: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-14-517-5439
Mounting Bracket

145175439
206938: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-482-0956
Mounting Plate

144820956
22398847: RNCC: 3 | RNVC: 2
22398847: RNCC: 5 | RNVC: 9

20 Jun 1996

5340-14-402-1379
Retaining Strap

144021379
224224: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-555-3178
Angle Bracket

145553178
82115358000: RNCC: 3 | RNVC: 2

24 Oct 2007

5340-14-470-0224
Retaining Strap

144700224
166024: RNCC: 3 | RNVC: 2
89170135: RNCC: 5 | RNVC: 2

25 May 1994

5340-14-385-9121
Loop Clamp

143859121
909620340: RNCC: 3 | RNVC: 2
102060160152: RNCC: 5 | RNVC: 2
909620340: RNCC: 5 | RNVC: 2

24 Aug 1983

5340-14-466-1297
Mounting Plate

144661297
62152413: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-14-452-1303
Mounting Bracket

144521303
16314441: RNCC: 3 | RNVC: 2
16314441: RNCC: 5 | RNVC: 9

18 Dec 1991

5340-14-546-2057
Angle Bracket

145462057
RA1A706216011: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-372-2873
Rim Lock Set

143722873
0000662655: RNCC: 3 | RNVC: 2
0000662655: RNCC: 5 | RNVC: 9

1 Sep 1981

5340-14-556-0965
Mounting Bracket

145560965
10518552: RNCC: 3 | RNVC: 2

29 Jan 2008

5340-14-444-7055
Bumper

144447055
39538924: RNCC: 3 | RNVC: 2
39538924: RNCC: 5 | RNVC: 9
6126: RNCC: 5 | RNVC: 9

16 Jan 1991

5340-14-426-1220
Runner

144261220
20732214: RNCC: 3 | RNVC: 2
20732214: RNCC: 5 | RNVC: 9

4 Aug 1988

Load More Results