What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 149 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 149 of 446

5340-14-516-8523
Mounting Bracket

145168523
101160651290: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-14-506-2962
Angle Bracket

145062962
38511799: RNCC: 3 | RNVC: 2
38511799: RNCC: 5 | RNVC: 9

22 Apr 1998

5340-14-533-4296
Angle Bracket

145334296
F1262632: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-477-1278
Mounting Bracket

144771278
5010093037: RNCC: 3 | RNVC: 2

26 Jul 1995

5340-14-514-4202
Loop Clamp

145144202
5010123177: RNCC: 3 | RNVC: 2

20 May 1999

5340-14-290-2331
Retaining Strap

142902331
330A75-3131-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-394-7364
Retaining Strap

143947364
NO PRIMARY REF14-394-7364: RNCC: 3 | RNVC: 2
Z35356REPF23: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-041-2492
Handwheel

140412492
DIAM160 CARRE14: RNCC: 3 | RNVC: 9
160-14A: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-343-1180
Buckle

143431180
3511-131-21781: RNCC: 3 | RNVC: 2
3511 131 21781: RNCC: 5 | RNVC: 2

16 Jun 1977

5340-14-520-4441
Mounting Bracket

145204441
M45AA0101-745: RNCC: 3 | RNVC: 2
M45AA0101-745: RNCC: 5 | RNVC: 9

17 May 2000

5340-14-528-0769
Mounting Bracket

145280769
355AMR-0546-01: RNCC: 3 | RNVC: 2

12 Dec 2001

5340-14-372-7392
Access Cover

143727392
365A25-0014-44: RNCC: 3 | RNVC: 2

14 Mar 1996

5340-14-222-7928
Webbing Strap

142227928
NO PRIMARY REF14-222-7928: RNCC: 3 | RNVC: 2
60568: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-280-0169
Retaining Strap

142800169
77086-69: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-488-9882
Bumper

144889882
51-03337 SC: RNCC: 3 | RNVC: 2

18 Jun 1997

5340-14-448-4883
Loop Clamp

144484883
89280308-28: RNCC: 3 | RNVC: 2
89280312: RNCC: 5 | RNVC: 2

26 Jun 1991

5340-14-394-2282
Handwheel

143942282
AS509-17: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-392-8695
Snap Hook

143928695
102914: RNCC: 3 | RNVC: 2
22388842: RNCC: 3 | RNVC: 2
22388842: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-14-451-6452
Drift Bolt

144516452
ST406M63P142: RNCC: 3 | RNVC: 2

28 Nov 1991

5340-14-535-0997
Loop Clamp

145350997
COLLIERDUFRENNE42: RNCC: 3 | RNVC: 2
SC020881: RNCC: 6 | RNVC: 9

14 May 2003

5340-14-313-9839
Mending Plate

143139839
HE597-6962: RNCC: 3 | RNVC: 2
9893475G1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-208-0350
Angle Bracket

142080350
305513: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-461-6738
Mounting Bracket

144616738
5000659038: RNCC: 3 | RNVC: 2
0000154615: RNCC: 5 | RNVC: 2
TID25133: RNCC: 5 | RNVC: 2

22 Mar 1993

5340-14-211-1928
Retaining Strap

142111928
32172: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-305-2596
Loop Clamp

143052596
270102138: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-282-8553
Loop Clamp

142828553
51211902010: RNCC: 3 | RNVC: 2
201901000: RNCC: 5 | RNVC: 2
20P10: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-458-2519
Angle Bracket Set

144582519
45000004: RNCC: 3 | RNVC: 2

14 Oct 1992

5340-14-450-1921
Mounting Bracket

144501921
29412430: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-433-9405
Shelf Bracket

144339405
1249110: RNCC: 3 | RNVC: 2

23 Aug 1989

5340-14-542-0729
Mounting Bracket

145420729
6501BSV120: RNCC: 3 | RNVC: 2

2 Jul 2004

5340-14-543-9206
Mounting Plate

145439206
MS416100: RNCC: 3 | RNVC: 2
MS416100: RNCC: 3 | RNVC: 2

16 Dec 2004

5340-14-401-2653
Angle Bracket

144012653
611225: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-465-8882
Mounting Bracket

144658882
120069-150: RNCC: 3 | RNVC: 9
91720132: RNCC: 5 | RNVC: 2

14 Oct 1993

5340-14-506-1720
Webbing Strap

145061720
2941: RNCC: 3 | RNVC: 2

8 Apr 1998

5340-14-456-5930
Clamping Catch

144565930
620303: RNCC: 3 | RNVC: 2

9 Jul 1992

5340-14-550-5118
Mounting Plate

145505118
RA1M705235111: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-482-4472
Retaining Clip

144824472
RA1M812750131: RNCC: 3 | RNVC: 2

11 Jul 1996

5340-14-292-8781
Threaded Rod End

142928781
410782M: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-392-7891
Anchor Strap

143927891
0013200215: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-561-4589
Utility Resilient Mount

145614589
F00328250: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-14-532-3589
Angle Bracket

145323589
RA1M210108041: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-540-6923
Mounting Bracket

145406923
38051782: RNCC: 3 | RNVC: 2
ND090871: RNCC: 5 | RNVC: 2
4848ZG8613180759: RNCC: 6 | RNVC: 9

20 Apr 2004

5340-14-532-1842
Mounting Bracket

145321842
10622570: RNCC: 3 | RNVC: 2

16 Oct 2002

5340-14-287-4828
Bow Handle

142874828
07540074: RNCC: 3 | RNVC: 2
07540074: RNCC: 3 | RNVC: 9

1 Jan 1972

5340-14-439-6884
Bumper

144396884
16295585: RNCC: 3 | RNVC: 2
16295585: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-551-6960
Access Cover

145516960
3CW2059: RNCC: 3 | RNVC: 2

17 Oct 2006

5340-14-485-6170
Lock Key

144856170
21324: RNCC: 3 | RNVC: 2

6 Feb 1997

5340-14-475-2648
Buckle

144752648
146026/146326: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-14-410-6573
Access Cover

144106573
401502: RNCC: 3 | RNVC: 2
BGE401502: RNCC: 5 | RNVC: 2

9 Jul 1986

5340-14-434-1181
Mounting Bracket

144341181
608800: RNCC: 3 | RNVC: 2
AJ001A: RNCC: 5 | RNVC: 2

6 Sep 1989

5340-14-399-7262
Rod End Clevis

143997262
M4ZS764D1213C: RNCC: 3 | RNVC: 2

14 Mar 1985

5340-14-523-2966
Pipe Hanger

145232966
X452790-1-2C: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-434-2916
Mounting Plate

144342916
562506: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-417-5369
Block Clamp

144175369
3153A224BREP5: RNCC: 3 | RNVC: 2
506019: RNCC: 5 | RNVC: 2

8 Jul 1987

5340-14-529-9320
Mounting Bracket

145299320
365A21-3249-24: RNCC: 3 | RNVC: 2

22 Apr 2002

5340-14-436-7343
Loop Clamp

144367343
NR23-21-6: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-246-2559
Angle Bracket

142462559
RR6-1-4-7: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-551-4634
Access Cover

145514634
714819: RNCC: 3 | RNVC: 2

25 Sep 2006

5340-14-414-5695
Retaining Strap

144145695
ST406M52P715: RNCC: 3 | RNVC: 2

11 Feb 1987

5340-14-455-5946
Mounting Bracket

144555946
16849110: RNCC: 3 | RNVC: 2
16849110: RNCC: 5 | RNVC: 9

28 May 1992

5340-14-434-6642
Stand Base

144346642
20672615: RNCC: 3 | RNVC: 2

27 Sep 1989

5340-14-372-1876
Bumper

143721876
141461: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-414-5494
Rod End Clevis

144145494
TH20C126: RNCC: 3 | RNVC: 2

11 Feb 1987

5340-14-257-5854
Access Cover

142575854
F116090: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-365-5608
Pipe Hanger

143655608
A11A221372040A1: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-392-9800
Angle Bracket

143929800
0000784126: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-523-2923
Retaining Band

145232923
RA1M702446057: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-532-1368
Mounting Plate

145321368
5010559930: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-14-507-6598
Mounting Plate

145076598
700581: RNCC: 3 | RNVC: 2

11 Aug 1998

5340-14-230-6140
Loop Clamp

142306140
0000126118: RNCC: 3 | RNVC: 2
0000126118: RNCC: 5 | RNVC: 9
126118: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-348-7071
Retaining Band

143487071
3105255: RNCC: 3 | RNVC: 2
3105255: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-368-3355
Bridge Clamp

143683355
003539228P: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-14-526-4744
Loop Clamp

145264744
78647B095: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-418-0773
Loop Clamp

144180773
2226: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-550-4893
Angle Bracket

145504893
RA1M704734381N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-507-4821
Clamping Catch

145074821
GRENO00001: RNCC: 3 | RNVC: 2

16 Jul 1998

5340-14-257-6072
Access Cover

142576072
295P362: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-492-3310
Mounting Bracket

144923310
5000044160: RNCC: 3 | RNVC: 2
F300 0T 007 4057: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-519-6623
Mounting Bracket

145196623
5010118681: RNCC: 3 | RNVC: 2

29 Mar 2000

5340-14-482-7400
Angle Bracket

144827400
39374233: RNCC: 3 | RNVC: 2

25 Jul 1996

5340-14-496-0275
Loop Clamp

144960275
C032: RNCC: 3 | RNVC: 2
F300 0T 020 7821: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-431-9769
Protection Bellows

144319769
8977541814: RNCC: 3 | RNVC: 2
8977541814: RNCC: 5 | RNVC: 2
91620878: RNCC: 5 | RNVC: 2
5000807744: RNCC: 5 | RNVC: 2

18 May 1989

5340-14-537-9052
Mounting Plate

145379052
10415768: RNCC: 3 | RNVC: 2

3 Dec 2003

5340-14-235-4534
Angle Bracket

142354534
104322: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-470-5389
Loop Clamp

144705389
511153050152: RNCC: 3 | RNVC: 2
55S15: RNCC: 5 | RNVC: 2

22 Jun 1994

5340-14-522-1114
Angle Bracket Set

145221114
3195071: RNCC: 3 | RNVC: 2
3195071: RNCC: 5 | RNVC: 2

4 Oct 2000

5340-14-528-5846
Rod Retainer Clip

145285846
935238: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-527-6134
Mounting Bracket

145276134
COU001552013020: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-14-552-0277
Mounting Plate

145520277
0226450300: RNCC: 3 | RNVC: 2

21 Nov 2006

5340-14-439-2878
Cover Strip

144392878
DA2C247820001: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-536-0811
Synchro Clamp

145360811
1813892C1: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-519-2475
Mounting Bracket

145192475
206931: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-555-7974
Mounting Plate

145557974
0177550480: RNCC: 3 | RNVC: 2

14 Dec 2007

5340-14-532-1434
Runner

145321434
5010579427: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-14-552-8484
Bumper

145528484
39-50293: RNCC: 3 | RNVC: 2
428605: RNCC: 5 | RNVC: 2

8 Feb 2007

5340-14-432-8501
Mounting Bracket

144328501
853-300-354-0: RNCC: 3 | RNVC: 2

28 Jun 1989

5340-14-519-5106
Mounting Bracket

145195106
456-10545-000: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-371-3902
Access Cover

143713902
294SP41-03: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-380-2863
Pipe Hanger

143802863
365A24-1012-16: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-441-3376
Loop Clamp

144413376
78653-32: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-428-2938
Bumper

144282938
330A22-0487-22: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-510-2806
Mounting Bracket

145102806
FC85-007-3: RNCC: 3 | RNVC: 2
1560AA8018478: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-369-0340
Loop Clamp

143690340
NO PRIMARY REF14-369-0340: RNCC: 3 | RNVC: 2
00-70-032: RNCC: 5 | RNVC: 9
0070032: RNCC: 5 | RNVC: 9

17 Apr 1981

5340-14-466-5422
Blank Panel

144665422
40-6-4E5-09: RNCC: 3 | RNVC: 2
89234667: RNCC: 5 | RNVC: 2

15 Nov 1993

5340-14-358-1007
Bumper

143581007
330A96-3300-23: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-14-297-7105
Bridge Clamp

142977105
773-210-027FF35: RNCC: 3 | RNVC: 2
773-210-027FF35: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-377-5175
Mounting Plate

143775175
A00808-05-1100P004: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-355-3296
Retaining Strap

143553296
FA2C794-23M1: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-465-2962
Mounting Bracket

144652962
365A81-0215-20: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-397-5940
Access Cover

143975940
20197442: RNCC: 3 | RNVC: 2
20197442: RNCC: 5 | RNVC: 9

14 Dec 1984

5340-14-207-0506
Access Cover

142070506
0000351732: RNCC: 3 | RNVC: 2
0000351732: RNCC: 5 | RNVC: 9
351732: RNCC: 5 | RNVC: 9
351732: RNCC: 6 | RNVC: 9

1 Jan 1964

5340-14-494-4252
Access Cover

144944252
45282415: RNCC: 3 | RNVC: 2
45282415: RNCC: 5 | RNVC: 9
F300 0T 017 3080: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-208-0281
Access Cover

142080281
0000128298: RNCC: 3 | RNVC: 2
0000128298: RNCC: 5 | RNVC: 9
128298: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-424-0809
Anchor Strap

144240809
5172074600: RNCC: 3 | RNVC: 2
720746: RNCC: 5 | RNVC: 9

11 May 1988

5340-14-506-0289
Cover Strip

145060289
RA1M295716411N1: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-14-545-2370
Mounting Bracket

145452370
T947A1001208: RNCC: 3 | RNVC: 2

29 Mar 2005

5340-14-512-0737
Angle Bracket

145120737
0062289: RNCC: 3 | RNVC: 2

3 Feb 1999

5340-14-457-1971
Webbing Strap

144571971
5000735048: RNCC: 3 | RNVC: 2

13 Aug 1992

5340-14-466-5464
Mounting Bracket

144665464
45215843: RNCC: 3 | RNVC: 2

15 Nov 1993

5340-14-486-0876
Metal Grille

144860876
6752287: RNCC: 3 | RNVC: 2

28 Feb 1997

5340-14-419-9298
Bumper

144199298
ST406M75P191: RNCC: 3 | RNVC: 2

10 Nov 1987

5340-14-535-7606
Mounting Bracket

145357606
T947A5001102: RNCC: 3 | RNVC: 2

25 Jun 2003

5340-14-461-9940
Protection Bellows

144619940
95653068: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-457-9880
Mounting Bracket

144579880
540292: RNCC: 3 | RNVC: 2

2 Oct 1992

5340-14-517-2135
Loop Clamp

145172135
2106008005: RNCC: 3 | RNVC: 2
9560170960: RNCC: 5 | RNVC: 2

17 Nov 1999

5340-14-214-7478
Mending Plate

142147478
0603792700: RNCC: 3 | RNVC: 2
0603792700: RNCC: 3 | RNVC: 2
0603792700: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-520-6250
Mounting Bracket

145206250
499422: RNCC: 3 | RNVC: 2

24 May 2000

5340-14-375-2879
Surface Bolt

143752879
F125021: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-504-5331
Loop Clamp

145045331
2652C807: RNCC: 3 | RNVC: 2

18 Feb 1998

5340-14-404-2921
Loop Clamp

144042921
SP428PPDPASIN0X: RNCC: 3 | RNVC: 2

19 Sep 1985

5340-14-416-6827
Angle Bracket

144166827
412802110200: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-552-0412
Angle Bracket

145520412
0249870910: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-14-270-1894
Loop Clamp

142701894
0176-522064: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-448-0619
Loop Clamp

144480619
51123105048: RNCC: 3 | RNVC: 2
25GE48: RNCC: 5 | RNVC: 2
24GE48: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-347-6567
Loop Clamp

143476567
79049239: RNCC: 3 | RNVC: 2
79049239: RNCC: 5 | RNVC: 9

1 Mar 1978

5340-14-483-1918
Rigid Caster

144831918
269435: RNCC: 3 | RNVC: 2
91771470: RNCC: 5 | RNVC: 2

22 Aug 1996

5340-14-545-6029
Section Block Clamp

145456029
09153200220: RNCC: 3 | RNVC: 2

25 Apr 2005

5340-14-400-8384
Retaining Strap

144008384
20383450: RNCC: 3 | RNVC: 2

21 May 1985

5340-14-448-0736
Cover Strip

144480736
PM1A711050102A1: RNCC: 3 | RNVC: 2
PM1A711050102A1: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-328-8342
Loop Clamp

143288342
M112780: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-448-0714
Butt Hinge

144480714
PM1A711024611: RNCC: 3 | RNVC: 2
PM1A711024611: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-430-5087
Butt Hinge

144305087
PM1A126710026U1: RNCC: 3 | RNVC: 2
PM1A126710026U1: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-032-0137
Mounting Bracket

140320137
0098630020: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-391-6001
Loop Clamp

143916001
494322G0003: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-523-6399
Mounting Plate

145236399
C3722805: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-388-7117
Retaining Strap

143887117
T8002HD30AREP18: RNCC: 3 | RNVC: 2

3 Nov 1983

5340-14-518-6329
Lock Bolt

145186329
5516003267: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-476-5009
Mounting Bracket

144765009
45452577: RNCC: 3 | RNVC: 2
45452577: RNCC: 3 | RNVC: 9

14 Jun 1995

5340-14-328-7645
Retaining Strap

143287645
A68387: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-389-5111
Angle Bracket

143895111
365A75-2212-20: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-484-3464
Dashpot Piston

144843464
1053733Q00: RNCC: 3 | RNVC: 2

14 Nov 1996

5340-14-521-2980
Mounting Bracket

145212980
10522312: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-511-2904
Clip Retainer Plate

145112904
9138: RNCC: 3 | RNVC: 2

11 Dec 1998

5340-14-508-6560
Loop Clamp

145086560
11317005028: RNCC: 3 | RNVC: 2

23 Sep 1998

5340-14-369-9070
Access Cover

143699070
5000497831: RNCC: 3 | RNVC: 2
5000497831: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-448-0845
Cover Strip

144480845
PM1A239106023: RNCC: 3 | RNVC: 2
PM1A239106023: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-553-3256
Mounting Bracket

145533256
MF073258: RNCC: 3 | RNVC: 2

24 Mar 2007

5340-14-448-1147
Mounting Plate

144481147
0120721309: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-543-7283
Compression Cup

145437283
425.812: RNCC: 3 | RNVC: 2

4 Dec 2004

5340-14-350-4251
Lock-Release Lever

143504251
214466: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-343-1557
Butt Hinge

143431557
4770010080: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-477-3204
Mounting Bracket

144773204
39520770: RNCC: 3 | RNVC: 2

16 Aug 1995

5340-14-484-6662
Retaining Strap

144846662
29416514: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-506-4651
Swivel Caster

145064651
8011264M00: RNCC: 3 | RNVC: 2

29 Apr 1998

5340-14-500-4520
Mounting Plate

145004520
E63206000018: RNCC: 3 | RNVC: 2
F300 0T 024 4689: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-210-5259
Handle Grip

142105259
C522R: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-267-8095
Expansion Shield

142678095
PF10: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-552-1560
Angle Bracket

145521560
DA1S292150933: RNCC: 3 | RNVC: 2

29 Nov 2006

5340-14-250-7470
Bow Handle

142507470
12501614: RNCC: 3 | RNVC: 2
12501614: RNCC: 3 | RNVC: 9

1 Jan 1968

5340-14-464-1514
Mending Plate

144641514
ST406M41P173: RNCC: 3 | RNVC: 2

15 Jul 1993

5340-14-513-2030
Mounting Bracket

145132030
T282A2001101: RNCC: 3 | RNVC: 2
T282A2001100: RNCC: 5 | RNVC: 2

10 Mar 1999

5340-14-488-6712
Mounting Bracket

144886712
3BT01435AAAA: RNCC: 3 | RNVC: 2
3BT01435AAAA: RNCC: 5 | RNVC: 9

28 May 1997

5340-14-399-9908
Mounting Bracket

143999908
604468: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-448-0796
Mounting Plate

144480796
PM1A237166101: RNCC: 3 | RNVC: 2
PM1A237166101: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-544-0566
Mounting Bracket

145440566
5010604177: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-14-399-1131
Leaf Spring

143991131
5000706985: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-547-0419
Mounting Bracket

145470419
82132561000: RNCC: 3 | RNVC: 2

17 Sep 2005

5340-14-517-7457
Mounting Bracket

145177457
TA5044G201: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-373-1675
Bumper

143731675
01-280161: RNCC: 3 | RNVC: 2
28501: RNCC: 5 | RNVC: 2

21 Oct 1981

5340-14-474-4516
Loop Clamp

144744516
51121905025: RNCC: 3 | RNVC: 2
25PE25: RNCC: 5 | RNVC: 2
24PE25: RNCC: 5 | RNVC: 2

15 Feb 1995

5340-14-418-6733
Angle Bracket

144186733
413002020013: RNCC: 3 | RNVC: 2

9 Sep 1987

5340-14-576-0062
Utility Access Door

145760062
82660972000: RNCC: 3 | RNVC: 2

23 May 2013

5340-14-545-8015
Mounting Bracket

145458015
10533581: RNCC: 3 | RNVC: 2

16 May 2005

5340-14-391-0676
Mounting Plate

143910676
NO PRIMARY REF14-391-0676: RNCC: 3 | RNVC: 2
52660: RNCC: 5 | RNVC: 9

1 Mar 1984

5340-14-328-1765
Angle Bracket

143281765
M208-23064: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-449-8266
Runner

144498266
993-01-13: RNCC: 3 | RNVC: 2
993-01-13: RNCC: 5 | RNVC: 2

11 Sep 1991

5340-14-371-5805
Locking Stay

143715805
FA1R292-34-57: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-483-6892
Bumper

144836892
TC1-36: RNCC: 3 | RNVC: 2
5000294982: RNCC: 5 | RNVC: 2
F300 0T 013 2584: RNCC: 6 | RNVC: 9

27 Sep 1996

5340-14-458-7666
Mounting Bracket

144587666
MN02/09-50: RNCC: 3 | RNVC: 2
RAR3512: RNCC: 5 | RNVC: 2
MN04/09-50: RNCC: 5 | RNVC: 2

3 Nov 1992

5340-14-297-7142
Runner

142977142
773-413-048FF6DET3SYMETRIQUE: RNCC: 3 | RNVC: 2
773-413-048FF6DET3SYMETRIQUE: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-480-3692
Filler Opening Cap

144803692
2210-11: RNCC: 3 | RNVC: 9

7 Mar 1996

5340-14-378-2938
Quick Release Pin

143782938
NO PRIMARY REF14-378-2938: RNCC: 3 | RNVC: 2
430-60-02: RNCC: 5 | RNVC: 9

20 Jul 1982

5340-14-394-6957
Butt Hinge

143946957
50-7-3580: RNCC: 3 | RNVC: 2

28 Aug 1984

5340-14-421-6921
Threaded Rod End

144216921
444-10468-000: RNCC: 3 | RNVC: 2
444-10468-000: RNCC: 5 | RNVC: 2

27 Jan 1988

5340-14-354-2797
Loop Clamp

143542797
PAA73-10-001-10: RNCC: 3 | RNVC: 2

30 Jan 1979

5340-14-444-1047
Rim Lock Set

144441047
DP002-048: RNCC: 3 | RNVC: 2

18 Dec 1990

5340-14-438-3022
Mounting Bracket

144383022
70015238: RNCC: 3 | RNVC: 2
C231970: RNCC: 3 | RNVC: 2
P3211: RNCC: 3 | RNVC: 2
P3211/C231970: RNCC: 3 | RNVC: 2
70015238: RNCC: 5 | RNVC: 9
P3211: RNCC: 5 | RNVC: 9

12 Mar 1990

5340-14-431-9392
Friction Catch

144319392
316-015: RNCC: 3 | RNVC: 2
316-015: RNCC: 5 | RNVC: 9
85-694-0794: RNCC: 6 | RNVC: 9

16 May 1989

5340-14-484-6863
Cable Retractor

144846863
NO PRIMARY REF14-484-6863: RNCC: 3 | RNVC: 2
37291: RNCC: 5 | RNVC: 2

3 Dec 1996

5340-14-377-9373
Control Rod

143779373
710020-21061: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-322-1171
Angle Bracket

143221171
121S76-705-00-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-324-8801
Rod End Connector

143248801
330A91-0015-28: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-462-6228
Metal Grille

144626228
P-2090-13-05-31: RNCC: 3 | RNVC: 2
P-2090-13-05-31: RNCC: 5 | RNVC: 9
SDMP-2090-13-05-31: RNCC: 5 | RNVC: 9

28 Apr 1993

5340-14-361-2710
Retaining Strap

143612710
X14203-17: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-560-9609
Utility Resilient Mount

145609609
CB1270-50: RNCC: 3 | RNVC: 2

4 Jun 2009

5340-14-477-1734
Angle Bracket

144771734
330A65-4129-01: RNCC: 3 | RNVC: 2
F300 0T 019 4722: RNCC: 5 | RNVC: 9

26 Jul 1995

5340-14-446-0124
Strap Hinge

144460124
NO PRIMARY REF14-446-0124: RNCC: 3 | RNVC: 2
54-5953: RNCC: 5 | RNVC: 9

4 Mar 1991

5340-14-266-1204
Hasp Staple

142661204
40469-1: RNCC: 3 | RNVC: 2
40469D1: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-298-5787
Handwheel

142985787
7-381: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-485-0688
Mounting Bracket

144850688
332A52-0150-20: RNCC: 3 | RNVC: 2
332A52015020: RNCC: 5 | RNVC: 2

19 Dec 1996

5340-14-479-2775
Access Cover

144792775
702A10-0092-50: RNCC: 3 | RNVC: 2

3 Jan 1996

5340-14-325-1633
Loop Clamp

143251633
16594733: RNCC: 3 | RNVC: 2
16594733: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-362-4894
Mending Plate

143624894
099111: RNCC: 3 | RNVC: 2
099111E: RNCC: 5 | RNVC: 2

19 Mar 1980

5340-14-312-1134
Retaining Strap

143121134
157062: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-384-6950
Retaining Strap

143846950
20190923: RNCC: 3 | RNVC: 2
20190923: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-283-9363
Angle Bracket

142839363
12508370: RNCC: 3 | RNVC: 2
12508370: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-294-1791
Loop Clamp

142941791
219000700: RNCC: 3 | RNVC: 2
9562811360: RNCC: 5 | RNVC: 2
21K7: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-484-3837
Retaining Strap

144843837
992357: RNCC: 3 | RNVC: 2
992357: RNCC: 5 | RNVC: 9

14 Nov 1996

5340-14-382-5656
Access Cover

143825656
16773700: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-445-0560
Mounting Bracket

144450560
112900: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-14-413-9334
Access Cover

144139334
402202: RNCC: 3 | RNVC: 2
BGE402202: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-328-8343
Loop Clamp

143288343
M112781: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-373-1506
Anchor Strap

143731506
70892: RNCC: 3 | RNVC: 2

21 Oct 1981

5340-14-449-6415
Bumper

144496415
1209142N001: RNCC: 3 | RNVC: 2
1209142P001: RNCC: 5 | RNVC: 2

28 Aug 1991

5340-14-453-0732
Angle Bracket

144530732
15010860C: RNCC: 3 | RNVC: 2

4 Feb 1992

5340-14-551-2559
Cushioning Pad

145512559
RA1B702202821N1: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-525-5810
Mounting Bracket

145255810
10 146 021 1000: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-484-7453
Angle Bracket

144847453
2501539H00: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-445-0553
Synchro Clamp

144450553
75614: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-14-393-0004
Leaf Spring

143930004
5000706989: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-14-447-9132
Plug Button

144479132
KY7467: RNCC: 3 | RNVC: 2

6 Jun 1991

5340-14-526-9891
Access Cover

145269891
T257A0006177: RNCC: 3 | RNVC: 2

20 Sep 2001

5340-14-383-0116
Access Door Hinge

143830116
4770216520: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-406-9825
Access Cover

144069825
401MA0566F10: RNCC: 3 | RNVC: 2

22 Jan 1986

5340-14-443-7299
Access Door Hinge

144437299
A528742: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-14-421-2362
Support Hook

144212362
AS: RNCC: 3 | RNVC: 2
552033: RNCC: 3 | RNVC: 2
102099: RNCC: 3 | RNVC: 9
AS: RNCC: 5 | RNVC: 2

11 Jan 1988

5340-14-441-4337
Butt Hinge

144414337
PM1A125810039U1: RNCC: 3 | RNVC: 2
PM1A125810039U1: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-14-430-5221
Butt Hinge

144305221
PM1A127134007: RNCC: 3 | RNVC: 2
PM1A127134007: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-459-8479
Mounting Plate

144598479
16787677: RNCC: 3 | RNVC: 2
16787677: RNCC: 5 | RNVC: 9

17 Dec 1992

5340-14-517-3486
Access Cover

145173486
29074922: RNCC: 3 | RNVC: 2

6 Dec 1999

5340-14-461-1392
Mounting Bracket

144611392
51171740012: RNCC: 3 | RNVC: 2

24 Feb 1993

5340-14-545-2656
Mounting Bracket

145452656
S215A4052103: RNCC: 3 | RNVC: 2

30 Mar 2005

5340-14-270-9398
Mending Plate

142709398
38393: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-388-8705
Retaining Strap

143888705
392411: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-487-4911
Mounting Plate

144874911
10287338: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-576-0450
Utility Access Door

145760450
82655583000: RNCC: 3 | RNVC: 2

27 May 2013

5340-14-416-4782
Angle Bracket

144164782
533422: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-14-479-6933
Doorstop

144796933
700534: RNCC: 3 | RNVC: 2

31 Jan 1996

5340-14-532-9688
Mounting Bracket

145329688
6401BDR100003: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-14-529-4234
Cushioning Pad

145294234
6501DCC123: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-535-1856
Mounting Bracket

145351856
5010399811: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-434-3605
Blank Panel

144343605
39225369: RNCC: 3 | RNVC: 2
39225369: RNCC: 5 | RNVC: 9

20 Sep 1989

5340-14-431-7930
Luggage Handle

144317930
050022: RNCC: 3 | RNVC: 2

10 May 1989

5340-14-446-7161
Angle Bracket

144467161
39958464: RNCC: 3 | RNVC: 2
39958464: RNCC: 5 | RNVC: 9

9 Apr 1991

5340-14-419-0547
Utility Access Door

144190547
16293394: RNCC: 3 | RNVC: 2
16293394: RNCC: 5 | RNVC: 9

30 Sep 1987

5340-14-385-9537
Anchor Strap

143859537
5000502250: RNCC: 3 | RNVC: 2
5000502250: RNCC: 5 | RNVC: 9

24 Aug 1983

5340-14-517-8785
Access Cover

145178785
A12700180: RNCC: 3 | RNVC: 2

17 Jan 2000

5340-14-283-9301
Retaining Strap

142839301
0067610200: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-431-7432
Access Cover

144317432
39079668: RNCC: 3 | RNVC: 2
39079668: RNCC: 3 | RNVC: 9

9 May 1989

5340-14-208-1755
Expansion Plug

142081755
0604613000: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-546-0727
Webbing Strap

145460727
95 141 02 0002: RNCC: 3 | RNVC: 2

9 Jun 2005

5340-14-383-3629
Loop Clamp

143833629
7701402139: RNCC: 3 | RNVC: 2
7701402139: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-536-0688
Mounting Bracket

145360688
803238130110: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-422-5690
Anchor Strap

144225690
4772102320: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-14-505-4990
Rod End Clevis

145054990
60308464: RNCC: 3 | RNVC: 9

18 Mar 1998

5340-14-449-1443
Rod End Clevis

144491443
BAZ92353: RNCC: 3 | RNVC: 2

31 Jul 1991

5340-14-385-9717
Access Cover

143859717
5000496459: RNCC: 3 | RNVC: 2
5000496459: RNCC: 5 | RNVC: 9

24 Aug 1983

5340-14-427-8700
Rod End Clevis

144278700
111209: RNCC: 3 | RNVC: 2

17 Nov 1988

5340-14-534-8076
Access Cover

145348076
4670101: RNCC: 3 | RNVC: 2

8 Apr 2003

5340-14-442-7480
Block Clamp

144427480
PM1A511324060: RNCC: 3 | RNVC: 2
PM1A511324060: RNCC: 5 | RNVC: 2

31 Oct 1990

5340-14-519-3485
Detent Plunger

145193485
C526A1013201: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-547-9418
Access Cover

145479418
56999315: RNCC: 3 | RNVC: 2

28 Nov 2005

5340-14-521-0414
Access Cover

145210414
47176748: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-14-367-3860
Angle Bracket

143673860
970258: RNCC: 3 | RNVC: 2
970258: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-448-2627
Angle Bracket

144482627
PM1A576194001A1: RNCC: 3 | RNVC: 2
PM1A576194001A1: RNCC: 5 | RNVC: 2

18 Jun 1991

5340-14-532-3280
Bridge Clamp

145323280
2262-226D501: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-500-8223
Section Block Clamp

145008223
E64009998097: RNCC: 3 | RNVC: 2
F300 0T 024 8425: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-503-5871
Mounting Bracket

145035871
96183089: RNCC: 3 | RNVC: 2
DB9P88P133011: RNCC: 5 | RNVC: 2

21 Jan 1998

5340-14-527-2094
Angle Bracket

145272094
6500L2: RNCC: 3 | RNVC: 2
9629408380: RNCC: 5 | RNVC: 2

12 Oct 2001

5340-14-370-6393
Buckle

143706393
12504000: RNCC: 3 | RNVC: 2
12504000: RNCC: 3 | RNVC: 9

18 May 1981

5340-14-499-4609
Bumper

144994609
3802684N00: RNCC: 3 | RNVC: 2
3802634N00: RNCC: 3 | RNVC: 2
3802634N00: RNCC: 5 | RNVC: 9
F300 0T 022 4582: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-488-2488
Leakproof Seal Plug

144882488
R43601REP17: RNCC: 3 | RNVC: 2

23 Apr 1997

5340-14-339-3341
Mending Plate

143393341
BA3271: RNCC: 3 | RNVC: 2
176022: RNCC: 5 | RNVC: 2
222509: RNCC: 5 | RNVC: 2
BA3271C: RNCC: 5 | RNVC: 2

18 Jan 1977

5340-14-461-2903
Mounting Bracket

144612903
3DM180532: RNCC: 3 | RNVC: 2
91714462: RNCC: 5 | RNVC: 2

3 Mar 1993

5340-14-532-4065
Webbing Strap

145324065
6402DLG111010: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-521-4984
Mounting Bracket

145214984
F00207522: RNCC: 3 | RNVC: 2
F00207522: RNCC: 5 | RNVC: 9

2 Aug 2000

5340-14-360-1913
Block Clamp

143601913
A11A704101180: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-438-7310
Mounting Plate

144387310
1203047: RNCC: 3 | RNVC: 2
1203047: RNCC: 5 | RNVC: 9

2 Apr 1990

5340-14-542-1625
Mounting Bracket

145421625
61201068AA: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-14-507-3520
Mounting Bracket

145073520
330A61-7019-03: RNCC: 3 | RNVC: 2
330A61-7019-00: RNCC: 5 | RNVC: 9

30 Jun 1998

5340-14-393-8885
Access Cover

143938885
366A87-1036-3801: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-501-5737
Pawl Fastener

145015737
1000-U149: RNCC: 3 | RNVC: 2
1000U149: RNCC: 5 | RNVC: 2

5 Nov 1997

5340-14-489-5938
Butt Hinge

144895938
85-7-1054: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-401-8054
Loop Clamp

144018054
157-OR: RNCC: 3 | RNVC: 2
85-692-6310: RNCC: 6 | RNVC: 9

13 Jun 1985

5340-14-376-5272
Anchor Strap

143765272
NO PRIMARY REF14-376-5272: RNCC: 3 | RNVC: 2
404304524: RNCC: 5 | RNVC: 2
404304524: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-407-8277
Mounting Plate

144078277
121-1156-03: RNCC: 3 | RNVC: 2
85-693-1099: RNCC: 6 | RNVC: 9

5 Mar 1986

5340-14-479-9221
Mounting Bracket

144799221
3511 192 94371: RNCC: 3 | RNVC: 2

14 Feb 1996

5340-14-551-2671
Angle Bracket

145512671
RA1M701317191N1: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-540-0109
Mounting Bracket

145400109
6501BMV120: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-344-2523
Bridge Clamp

143442523
32749: RNCC: 3 | RNVC: 2
80840: RNCC: 5 | RNVC: 2

10 Aug 1977

5340-14-502-8075
Detent Plunger

145028075
8T4157: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-481-9347
Block Clamp

144819347
121S63-130-59-0: RNCC: 3 | RNVC: 2

8 Jun 1996

5340-14-464-8760
Clamping Catch

144648760
PE75007-1: RNCC: 3 | RNVC: 2

7 Sep 1993

5340-14-358-1942
Runner

143581942
AFM62-5: RNCC: 3 | RNVC: 2
1M5A5: RNCC: 5 | RNVC: 2

13 Aug 1979

5340-14-305-6107
Casement Fastener

143056107
221: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-445-2090
Mortise Lock Set

144452090
0886476Q00: RNCC: 3 | RNVC: 2

5 Feb 1991

5340-14-304-3044
Angle Bracket

143043044
121S71-270-53-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-500-6556
Pin Removable Head

145006556
D.F.89: RNCC: 3 | RNVC: 2
0946410062: RNCC: 5 | RNVC: 2
0946410062: RNCC: 5 | RNVC: 2
F300 0T 024 6747: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-304-3014
Angle Bracket

143043014
121E71-311-41-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-378-5165
Rod End Connector

143785165
F50B295001012A1: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-367-9605
Access Cover

143679605
79095962: RNCC: 3 | RNVC: 2
79095962: RNCC: 5 | RNVC: 9

19 Jan 1981

5340-14-517-0042
Angle Bracket

145170042
RA1M703880140N1: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-552-4471
Mounting Bracket

145524471
S720V5001231: RNCC: 3 | RNVC: 2

3 Jan 2007

5340-14-477-6959
Access Cover

144776959
38510063: RNCC: 3 | RNVC: 2
38510063: RNCC: 5 | RNVC: 9

20 Sep 1995

5340-14-472-9657
Block Clamp

144729657
3BM02326AAAA: RNCC: 3 | RNVC: 2
3BM02326AAAA: RNCC: 5 | RNVC: 9

23 Nov 1994

5340-14-296-1953
Bumper

142961953
121E77-325-40-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-520-3015
Mounting Bracket

145203015
15900050: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-546-3021
Mounting Bracket

145463021
10674034000: RNCC: 3 | RNVC: 2

22 Jun 2005

5340-14-461-1671
Elastic Strap

144611671
4771621750: RNCC: 3 | RNVC: 2
5045992: RNCC: 5 | RNVC: 9

24 Feb 1993

5340-14-379-7712
Retaining Strap

143797712
BAZ5531: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-387-2945
Mounting Plate

143872945
16762527: RNCC: 3 | RNVC: 2
16762527: RNCC: 5 | RNVC: 9

15 Sep 1983

5340-14-397-1155
Mounting Plate

143971155
20734859: RNCC: 3 | RNVC: 2

1 Dec 1984

5340-14-350-5375
Padlock

143505375
525213: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-250-3300
Access Cover

142503300
150152: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-350-4100
Retaining Strap

143504100
214233: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-548-0281
Lock Bolt

145480281
10682678000: RNCC: 3 | RNVC: 2

6 Dec 2005

5340-14-535-0580
Butt Hinge

145350580
4CH43IB: RNCC: 3 | RNVC: 2
999956: RNCC: 3 | RNVC: 2
CAE01201: RNCC: 5 | RNVC: 2

30 Apr 2003

5340-14-354-1254
Retaining Strap

143541254
16273712: RNCC: 3 | RNVC: 2
16273712: RNCC: 5 | RNVC: 2
16273712: RNCC: 5 | RNVC: 9

16 Jan 1979

5340-14-497-6497
Mounting Plate

144976497
6A3881: RNCC: 3 | RNVC: 2
F300 0T 023 4543: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-506-0221
Mounting Plate

145060221
RA1M114101660N1: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-14-453-7359
Handwheel

144537359
120069-125: RNCC: 3 | RNVC: 9
91720117: RNCC: 5 | RNVC: 2

5 Mar 1992

5340-14-456-1052
Mounting Plate

144561052
6830724: RNCC: 3 | RNVC: 2

18 Jun 1992

5340-14-569-4230
Utility Guard Rail Section

145694230
PC3231: RNCC: 3 | RNVC: 2
8KK359: RNCC: 5 | RNVC: 2
8KK359: RNCC: 5 | RNVC: 2

14 Sep 2011

5340-14-392-4412
Leaf Spring

143924412
C6A010100: RNCC: 3 | RNVC: 9

21 Mar 1984

5340-14-226-6318
Loop Clamp

142266318
261S: RNCC: 3 | RNVC: 9
261: RNCC: 5 | RNVC: 9
1000350P: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-419-9160
Retaining Strap

144199160
160G9X6: RNCC: 3 | RNVC: 2

10 Nov 1987

5340-14-543-5341
Mounting Bracket

145435341
S522A5001102: RNCC: 3 | RNVC: 2

18 Nov 2004

5340-14-451-9452
Cover Strip

144519452
6511E-REP17J197X773: RNCC: 3 | RNVC: 2

12 Dec 1991

5340-14-543-6111
Mounting Bracket

145436111
AMPC GENE E223208: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-14-318-8528
Angle Bracket

143188528
0000569224: RNCC: 3 | RNVC: 2
0000569224: RNCC: 5 | RNVC: 9
569224: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-302-3725
Mending Plate

143023725
181114: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-527-9061
Loop Clamp

145279061
40REF08008: RNCC: 3 | RNVC: 2

28 Nov 2001

5340-14-523-2186
Pipe Hanger

145232186
RA1M122141441: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-346-8897
Permanent Magnet

143468897
819AIMANT: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-14-459-2081
Runner

144592081
PM1A861350015: RNCC: 3 | RNVC: 2
PM1A861350015: RNCC: 5 | RNVC: 2

19 Nov 1992

5340-14-492-7912
Mounting Plate

144927912
TM3S6C10: RNCC: 3 | RNVC: 2
F300 0T 008 7982: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-427-3889
Rim Lock

144273889
NO PRIMARY REF14-427-3889: RNCC: 3 | RNVC: 2
148132900: RNCC: 5 | RNVC: 2
148132900: RNCC: 5 | RNVC: 9

15 Oct 1988

5340-14-332-9437
Angle Bracket

143329437
NO PRIMARY REF14-332-9437: RNCC: 3 | RNVC: 2
D10-32291: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-550-9237
Angle Bracket

145509237
RA1B701852421N1: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-363-3692
Mounting Plate

143633692
SI5013F7: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-14-519-1825
Access Cover

145191825
157E344-02: RNCC: 3 | RNVC: 2
1088402G01: RNCC: 5 | RNVC: 2
157E344-02: RNCC: 5 | RNVC: 9

10 Mar 2000

5340-14-549-9692
Mounting Bracket

145499692
T327A1001207: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-354-1253
Retaining Strap

143541253
16273711: RNCC: 3 | RNVC: 2
16273711: RNCC: 5 | RNVC: 2
16273711: RNCC: 5 | RNVC: 9

16 Jan 1979

5340-14-497-8784
Bumper

144978784
793-715: RNCC: 3 | RNVC: 2

22 Oct 1997

5340-14-302-5510
Bumper

143025510
330A58-3342-21: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-205-0359
Retaining Strap

142050359
0067620170: RNCC: 3 | RNVC: 2
067-62-017: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-472-8954
Section Block Clamp

144728954
332A75-1618-20: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-472-9673
Angle Bracket

144729673
38222814: RNCC: 3 | RNVC: 2
38222814: RNCC: 5 | RNVC: 9

23 Nov 1994

5340-14-465-0577
Angle Bracket

144650577
008562222P: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-511-9852
Mounting Plate

145119852
0052345: RNCC: 3 | RNVC: 2
22512: RNCC: 3 | RNVC: 9
22512-10: RNCC: 5 | RNVC: 9

2 Feb 1999

5340-14-446-3951
Angle Bracket

144463951
058529C2232: RNCC: 3 | RNVC: 2

19 Mar 1991

5340-14-523-7419
Mounting Plate

145237419
10353719: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-519-2494
Mounting Plate

145192494
208929: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-514-0676
Mounting Plate

145140676
RA1M704865890: RNCC: 3 | RNVC: 2

22 Apr 1999

5340-14-494-2688
Loop Clamp

144942688
5010036601: RNCC: 3 | RNVC: 2
F300 0T 016 7699: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-527-7529
Retaining Strap

145277529
710216: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-14-562-3772
Utility Resilient Mount

145623772
101 418: RNCC: 3 | RNVC: 2
R502 101418: RNCC: 5 | RNVC: 2
030411 R1 DL08849: RNCC: 5 | RNVC: 2

20 Oct 2009

5340-14-031-3533
Rod End Clevis

140313533
050A55-520770Y: RNCC: 3 | RNVC: 2
0520770Y00: RNCC: 5 | RNVC: 2

14 Jun 1980

5340-14-442-3176
Vent Plug

144423176
332A55-0320-0082: RNCC: 3 | RNVC: 2

10 Oct 1990

5340-14-324-7222
Control Rod

143247222
773-411-505FF5DE: RNCC: 3 | RNVC: 2
773-411-505FF5DET4: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-548-7557
Clamping Catch

145487557
F7-53: RNCC: 3 | RNVC: 2
36-095-122: RNCC: 5 | RNVC: 2

7 Feb 2006

5340-14-335-0498
Handwheel

143350498
MAT137-005F10AVIORB: RNCC: 3 | RNVC: 2
GSM137-07F14AVI0RB: RNCC: 5 | RNVC: 2
GSM137-007F14AVI0RB: RNCC: 5 | RNVC: 2

2 Jun 1976

5340-14-442-3172
Vent Plug

144423172
332A55-0120-0292: RNCC: 3 | RNVC: 2

10 Oct 1990

5340-14-344-9293
Bumper

143449293
34678: RNCC: 3 | RNVC: 2
B09432-08: RNCC: 5 | RNVC: 2
82634: RNCC: 5 | RNVC: 2
3151037R1: RNCC: 5 | RNVC: 2
10670: RNCC: 5 | RNVC: 9

9 Sep 1977

5340-14-419-5295
Mounting Plate

144195295
M271-2707: RNCC: 3 | RNVC: 2
F300 0T 006 1350: RNCC: 6 | RNVC: 9

21 Oct 1987

5340-14-413-7649
Loop Clamp

144137649
A0021-31F19: RNCC: 3 | RNVC: 2

15 Jan 1987

5340-14-551-2661
Rigid Caster

145512661
UF5BA200-21B: RNCC: 3 | RNVC: 2
UF5BA200-21.B: RNCC: 5 | RNVC: 9

7 Sep 2006

5340-14-507-3705
Runner

145073705
MAT527-0008F13: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-14-345-2664
Loop Clamp

143452664
3-2-2606-02-50A: RNCC: 3 | RNVC: 2
3-2-2606-02-50: RNCC: 5 | RNVC: 2

5 Oct 1977

5340-14-553-6645
Mounting Bracket

145536645
MS-1114-0040-000-1-4300: RNCC: 3 | RNVC: 2

3 May 2007

5340-14-484-8197
Mounting Bracket

144848197
332P65-2773-00: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-389-4577
Mending Plate

143894577
365A55-3111-03: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-512-2200
Mounting Plate

145122200
4374-0046: RNCC: 3 | RNVC: 2

8 Feb 1999

5340-14-504-6006
Bow Handle

145046006
A4-10488: RNCC: 3 | RNVC: 2
DIA30INT-LG135MM: RNCC: 5 | RNVC: 2

25 Feb 1998

5340-14-520-7376
Arched Cushion

145207376
MAT169-0027F19DE89: RNCC: 3 | RNVC: 2

6 Jun 2000

5340-14-331-0147
Lock-Release Lever

143310147
T20-13B105: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-534-1298
Mounting Plate

145341298
332P67-2820-0001: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-205-9870
Loop Clamp

142059870
2228-53-10-00-10: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-372-7017
Pipe Hanger

143727017
121E71-536-01-0: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-441-2029
Doorstop

144412029
332A58-4558-20: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-360-9457
Rim Lock Set

143609457
1083B24: RNCC: 3 | RNVC: 2
85-689-9092: RNCC: 6 | RNVC: 9

19 Dec 1979

5340-14-378-4783
Cover Strip

143784783
330A25-2037-25: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-416-9122
Cover Strip

144169122
F706-56-01: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-389-7599
Loop Clamp

143897599
35GT12: RNCC: 3 | RNVC: 2
85-692-5354: RNCC: 6 | RNVC: 9

20 Dec 1983

5340-14-458-7794
Cushioning Pad

144587794
MN03/09-53: RNCC: 3 | RNVC: 2
MN03/09-57: RNCC: 5 | RNVC: 2

4 Nov 1992

5340-14-430-9421
Angle Bracket

144309421
G230024-18: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-14-505-0844
Metal Grille

145050844
LSA32-1L10A1-2REP51: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-470-2381
Butt Hinge

144702381
HL54-400050: RNCC: 3 | RNVC: 2

8 Jun 1994

5340-14-376-7703
Quick Release Pin

143767703
57108: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-515-1584
Runner

145151584
47137848: RNCC: 3 | RNVC: 2

9 Jul 1999

5340-14-474-7017
Loop Clamp

144747017
9-28SE05: RNCC: 3 | RNVC: 2

27 Feb 1995

5340-14-549-2638
Mounting Bracket

145492638
FARD5 005 06 P 5548A02: RNCC: 3 | RNVC: 2

16 Mar 2006

5340-14-228-9133
Loop Clamp

142289133
12503360: RNCC: 3 | RNVC: 2
6301: RNCC: 3 | RNVC: 9
12230245-2: RNCC: 5 | RNVC: 2
91281867: RNCC: 5 | RNVC: 2
12503360: RNCC: 5 | RNVC: 2
91281867: RNCC: 5 | RNVC: 2
0192540R00: RNCC: 5 | RNVC: 2
91281867: RNCC: 5 | RNVC: 2
12503360: RNCC: 5 | RNVC: 9
6301: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-476-3821
Access Cover

144763821
EP37901007-1: RNCC: 3 | RNVC: 2
EP37901007-1: RNCC: 5 | RNVC: 9

7 Jun 1995

5340-14-478-8827
Rod End Connector

144788827
K15555POP109: RNCC: 3 | RNVC: 2

30 Nov 1995

5340-14-488-4197
Mounting Plate

144884197
59721-1: RNCC: 3 | RNVC: 2

7 May 1997

5340-14-504-0193
Webbing Strap

145040193
20753-1: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-14-425-4531
Bumper

144254531
21116707-2: RNCC: 3 | RNVC: 2

5 Jul 1988

5340-14-031-1545
Access Cover

140311545
VDP2600-1: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-366-8193
Runner

143668193
970585: RNCC: 3 | RNVC: 2
970585: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-252-8256
Mending Plate

142528256
GB1376-2-1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-283-0423
Bumper

142830423
2-05839: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-280-4331
Runner

142804331
31064-1: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-471-1175
Mounting Bracket

144711175
AG16-1: RNCC: 3 | RNVC: 2
91727079: RNCC: 5 | RNVC: 2

27 Jul 1994

5340-14-515-5114
Eye Hook

145155114
4100106: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-266-3516
Angle Bracket

142663516
ST406M52P13E106: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-447-6428
Retaining Strap

144476428
5000921390: RNCC: 3 | RNVC: 2

29 May 1991

5340-14-507-9735
Metal Grille

145079735
N118186: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-505-2271
Retaining Strap

145052271
96063415: RNCC: 3 | RNVC: 2

13 Mar 1998

5340-14-267-5213
Loop Clamp

142675213
24049005400: RNCC: 3 | RNVC: 2
49J54: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-423-7604
Angle Bracket

144237604
553232: RNCC: 3 | RNVC: 2

28 Apr 1988

5340-14-477-2496
Arched Cushion

144772496
RA1M210853133: RNCC: 3 | RNVC: 2

2 Aug 1995

5340-14-548-6351
Mounting Plate

145486351
RA1M701176121A1: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-544-3603
Mounting Bracket

145443603
S531A2091116: RNCC: 3 | RNVC: 2

24 Jan 2005

5340-14-504-0752
Angle Bracket

145040752
MB1186F00: RNCC: 3 | RNVC: 2

5 Feb 1998

5340-14-413-9880
Retaining Strap

144139880
BJM01556: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-452-4233
Angle Bracket

144524233
EA1M383A1: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-395-0892
Mortise Latch

143950892
16035482: RNCC: 3 | RNVC: 2
16035482: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-516-4214
Block Clamp

145164214
91300072402: RNCC: 3 | RNVC: 2
SDM91300072402: RNCC: 5 | RNVC: 9

22 Sep 1999

5340-14-315-7193
Retaining Strap

143157193
321A60-4604-21: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-360-2192
Flush Catch Claw

143602192
16293709: RNCC: 3 | RNVC: 2
16293709: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-464-9844
Butt Hinge

144649844
365A81-0173-0001: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-403-3561
Quick Release Pin

144033561
195189: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-512-5393
Access Cover

145125393
F232-41-05: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-513-6079
Buckle

145136079
6141B: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-14-502-5761
Angle Bracket

145025761
5001822940: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-479-3489
Mounting Plate

144793489
AT100PD200205: RNCC: 3 | RNVC: 9

10 Jan 1996

5340-14-556-0270
Mounting Bracket

145560270
0319739870: RNCC: 3 | RNVC: 2

22 Jan 2008

5340-14-319-8499
Bow Handle

143198499
763315: RNCC: 3 | RNVC: 2
763315: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-331-0402
Webbing Strap

143310402
MR065-005: RNCC: 3 | RNVC: 9

2 Jul 1975

5340-14-286-4830
Angle Bracket

142864830
341A25-1000-25: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-486-5069
Anchor Strap

144865069
C4420349: RNCC: 3 | RNVC: 2
C44203-49: RNCC: 5 | RNVC: 2
P44203-49C: RNCC: 5 | RNVC: 2

21 Mar 1997

5340-14-484-2541
Loop Clamp

144842541
501-804-598-0: RNCC: 3 | RNVC: 2

31 Oct 1996

5340-14-245-0105
Loop Clamp

142450105
NT46-01MARS54C0LLIERC0MPLET: RNCC: 2 | RNVC: 2
NO PRIMARY REF14-245-0105: RNCC: 3 | RNVC: 2
NT46-01MARS54C0LLIERC0MPLET: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-476-0404
Section Block Clamp

144760404
20731000204: RNCC: 3 | RNVC: 2
PAA73-10-002-04: RNCC: 5 | RNVC: 2

17 May 1995

5340-14-475-4452
Mounting Bracket

144754452
2307-204-000: RNCC: 3 | RNVC: 2
85-801-3331: RNCC: 6 | RNVC: 9

5 Apr 1995

5340-14-466-0323
Handle Grip

144660323
7502-2316: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-14-356-8516
Lock-Release Lever

143568516
GSM482-006F13: RNCC: 3 | RNVC: 2

15 May 1979

5340-14-253-4280
Loop Clamp

142534280
321A27-0310-01: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-212-9508
Loop Clamp

142129508
3130S45-10-030: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-541-5068
Mounting Bracket

145415068
1091095-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-526-0758
Arched Cushion

145260758
MAT169-0024F7FORTERAIDEUR: RNCC: 3 | RNVC: 2
E1M370730: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-14-472-4822
Mounting Bracket

144724822
139E050-01: RNCC: 3 | RNVC: 2
139E050-01: RNCC: 5 | RNVC: 9

26 Oct 1994

5340-14-477-8316
Detent Plunger

144778316
1884-01-40-14: RNCC: 3 | RNVC: 2

27 Sep 1995

5340-14-478-7957
Mounting Bracket

144787957
330A72-0006-24: RNCC: 3 | RNVC: 2
F300 0T 020 6146: RNCC: 5 | RNVC: 9

20 Nov 1995

5340-14-536-4966
Expansion Shield

145364966
NO PRIMARY REF14-536-4966: RNCC: 3 | RNVC: 2
525-414: RNCC: 5 | RNVC: 9
SC086703: RNCC: 6 | RNVC: 9

28 Aug 2003

5340-14-345-2271
Loop Clamp

143452271
FB1A702-27: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-532-5531
Access Cover

145325531
J05402-01-0401P028: RNCC: 3 | RNVC: 2

13 Nov 2002

5340-14-231-0921
Loop Clamp

142310921
EN4114S32NH0: RNCC: 2 | RNVC: 2
51115305032: RNCC: 3 | RNVC: 2
25S32: RNCC: 5 | RNVC: 2
ASNA0021-25S32: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-529-5612
Mounting Bracket

145295612
330A68-2042-00: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-504-5898
Metal Grille

145045898
0124-50: RNCC: 3 | RNVC: 2
CAE00974: RNCC: 5 | RNVC: 2
LCL0124-50: RNCC: 5 | RNVC: 9

25 Feb 1998

5340-14-508-2671
Blank Panel

145082671
0A-A13003751: RNCC: 3 | RNVC: 2
0A/A13003751: RNCC: 3 | RNVC: 2
0A-A13003751: RNCC: 5 | RNVC: 2

2 Sep 1998

5340-14-310-5080
Loop Clamp

143105080
51215305016: RNCC: 3 | RNVC: 2
20S16: RNCC: 5 | RNVC: 2
A0021-20S16: RNCC: 5 | RNVC: 2
A0021-20S16: RNCC: 5 | RNVC: 2
ASNA0021-20S16: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-382-9121
Bumper

143829121
147990-25: RNCC: 3 | RNVC: 2
147990: RNCC: 5 | RNVC: 2

17 Mar 1983

5340-14-482-3719
Mounting Bracket

144823719
312-18571-001: RNCC: 3 | RNVC: 2

10 Jul 1996

5340-14-432-4986
Access Cover

144324986
140958-01: RNCC: 3 | RNVC: 2

14 Jun 1989

5340-14-322-8614
Cover Strip

143228614
3130S73-86-084: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-468-0586
Mounting Bracket

144680586
312-15462-001: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-223-0526
Access Cover

142230526
G2-83A: RNCC: 3 | RNVC: 2
G2-83A: RNCC: 5 | RNVC: 2
G2-83A: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-528-4081
Loop Clamp

145284081
25802/FB996: RNCC: 3 | RNVC: 2
25802: RNCC: 5 | RNVC: 2

25 Jan 2002

5340-14-376-1654
Bumper

143761654
AETSAV1301-110B: RNCC: 3 | RNVC: 2
AETSAV1301-110A: RNCC: 5 | RNVC: 2
85-691-9698: RNCC: 6 | RNVC: 9

30 Mar 1982

5340-14-389-5334
Access Cover

143895334
365A81-0082-00: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-286-4439
Loop Clamp

142864439
3160S99-22-000: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-336-0767
Angle Bracket

143360767
NO PRIMARY REF14-336-0767: RNCC: 3 | RNVC: 2
27-06002-133-00: RNCC: 5 | RNVC: 9

24 Jul 1976

5340-14-219-3026
Bridge Clamp

142193026
E841A: RNCC: 3 | RNVC: 2
PM39A: RNCC: 5 | RNVC: 2
PM-39A: RNCC: 6 | RNVC: 9

1 Jan 1965

5340-14-043-1236
Loop Clamp

140431236
064T10-640205A: RNCC: 3 | RNVC: 2
064T10-64025A: RNCC: 5 | RNVC: 2

10 Apr 1984

5340-14-231-0923
Loop Clamp

142310923
25G40: RNCC: 3 | RNVC: 2
ASNA0021-25G40: RNCC: 5 | RNVC: 2
A0021-25G40: RNCC: 5 | RNVC: 2
A0021-25G40: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-384-3193
Loop Clamp

143843193
92853141: RNCC: 3 | RNVC: 2
9-28SE14: RNCC: 5 | RNVC: 2

4 May 1983

5340-14-473-6786
Mounting Plate

144736786
332P61-6237-01: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-283-5178
Loop Clamp

142835178
NO PRIMARY REF14-283-5178: RNCC: 3 | RNVC: 2
17-600-20: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-529-1499
Permanent Magnet

145291499
457-01273-000: RNCC: 3 | RNVC: 2

13 Mar 2002

5340-14-439-5241
Bumper

144395241
TB1030407: RNCC: 3 | RNVC: 2

11 May 1990

5340-14-527-3780
Mounting Plate

145273780
H145013W: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-307-7727
Loop Clamp

143077727
10017-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-499-5106
Access Cover

144995106
T54 607 20: RNCC: 3 | RNVC: 2
T5460720: RNCC: 5 | RNVC: 2
F300 0T 023 0445: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-359-0744
Anchor Strap

143590744
A11A221172120: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-472-9679
Angle Bracket

144729679
38223364: RNCC: 3 | RNVC: 2
38223364: RNCC: 5 | RNVC: 9

23 Nov 1994

5340-14-392-6772
Access Cover

143926772
194918: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-535-2485
Cushioning Pad

145352485
6501PHE142003: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-541-9597
Mounting Bracket

145419597
502199005023A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-292-1269
Buckle

142921269
B0UCLE30X34ACHAPELAIT0NNICKELE: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-255-5273
Access Cover

142555273
70663445: RNCC: 3 | RNVC: 2
70663445: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-519-4265
Access Cover

145194265
10599834: RNCC: 3 | RNVC: 2

17 Mar 2000

5340-14-495-7126
Mounting Plate

144957126
109071001001A: RNCC: 3 | RNVC: 2
109071001001A: RNCC: 3 | RNVC: 9
F300 0T 019 7023: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-463-3934
Rod End Clevis

144633934
1302501: RNCC: 3 | RNVC: 2

9 Jun 1993

5340-14-451-2321
Pipe Hanger

144512321
PM1A729009640: RNCC: 3 | RNVC: 2
PM1A729009640: RNCC: 5 | RNVC: 2

6 Nov 1991

5340-14-366-3300
Webbing Strap

143663300
423395: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-553-0677
Webbing Strap

145530677
0027971: RNCC: 3 | RNVC: 2

27 Feb 2007

5340-14-533-8475
Access Cover

145338475
46945574: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-451-2704
Rod End Clevis

144512704
CC2B14010M1: RNCC: 3 | RNVC: 2
CC2A14010M1: RNCC: 5 | RNVC: 9

6 Nov 1991

Load More Results