What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 148 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 148 of 446

5340-14-489-5515
Bumper

144895515
47134022: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-14-519-2633
Mounting Plate

145192633
253225: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-519-6600
Runner

145196600
5010399513: RNCC: 3 | RNVC: 2

29 Mar 2000

5340-14-505-6876
Lock Bolt

145056876
A44823: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-417-5450
Block Clamp

144175450
4679A317REP10: RNCC: 3 | RNVC: 2
589012: RNCC: 5 | RNVC: 2

8 Jul 1987

5340-14-409-6459
Cover Strip

144096459
DA1D203361001: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-530-7952
Lock Bolt

145307952
15230366: RNCC: 3 | RNVC: 2

4 Jul 2002

5340-14-525-3421
Bumper

145253421
C56.11250: RNCC: 3 | RNVC: 2
SYB2959: RNCC: 5 | RNVC: 2

28 May 2001

5340-14-462-6631
Retaining Strap

144626631
73967: RNCC: 3 | RNVC: 2
125730: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-533-1371
Mounting Bracket

145331371
10476974: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-14-530-9400
Mending Plate

145309400
46159291: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-14-553-3113
Loop Clamp

145533113
EN4114S37NH0: RNCC: 2 | RNVC: 2
41146737020: RNCC: 3 | RNVC: 2

22 Mar 2007

5340-14-366-8103
Mending Plate

143668103
970054: RNCC: 3 | RNVC: 2
970054: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-473-3826
Mounting Plate

144733826
332A25-1297-21: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-533-1779
Loop Clamp

145331779
5005005115: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-14-514-5222
Mounting Bracket

145145222
373210N: RNCC: 3 | RNVC: 2

26 May 1999

5340-14-518-4469
Mounting Plate

145184469
3430119: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-524-5214
Synchro Clamp

145245214
808912: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-297-4660
Rim Lock Set

142974660
1033TEINTE0R: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-456-4939
Protection Bellows

144564939
K78-51: RNCC: 3 | RNVC: 2

2 Jul 1992

5340-14-465-0546
Mounting Bracket

144650546
27101240-1: RNCC: 3 | RNVC: 2
M389-120003: RNCC: 5 | RNVC: 2

8 Sep 1993

5340-14-379-6814
Runner

143796814
NO PRIMARY REF14-379-6814: RNCC: 3 | RNVC: 2
3264MA: RNCC: 5 | RNVC: 9

20 Oct 1982

5340-14-322-0858
Rim Latch

143220858
F03438-09: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-404-0366
Bumper

144040366
366A00-0023-45: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-319-0168
Quick Release Pin

143190168
0RC5-50-22: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-345-1200
Access Cover

143451200
300-685-201-0: RNCC: 3 | RNVC: 2
001358010A: RNCC: 5 | RNVC: 2
300-685-201P: RNCC: 5 | RNVC: 2

5 Oct 1977

5340-14-457-5896
Angle Bracket

144575896
PM1A835142102A1: RNCC: 3 | RNVC: 2
PM1A835142102A1: RNCC: 5 | RNVC: 2
85-801-2879: RNCC: 6 | RNVC: 9

10 Sep 1992

5340-14-303-8361
Control Rod

143038361
554-413-064FF7S0LUTI0NB: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-410-3169
Bumper

144103169
332A21-1092-36: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-14-481-3248
Locking Stay

144813248
23241087-7: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-425-8109
Flush Lock

144258109
36507: RNCC: 3 | RNVC: 2

21 Jul 1988

5340-14-348-0097
Anchor Strap

143480097
21537-1: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-325-4858
Mounting Plate

143254858
C11BA0101-035: RNCC: 3 | RNVC: 2
C11BA0101-035: RNCC: 5 | RNVC: 2
C11BA0101-035: RNCC: 5 | RNVC: 2
C11BA0101-035: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-353-2160
Webbing Strap

143532160
356002030301: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-499-8032
Mounting Bracket

144998032
55548-2: RNCC: 3 | RNVC: 2
55548.2: RNCC: 5 | RNVC: 2
F300 0T 023 7937: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-436-4612
Quick Release Pin

144364612
413C6R32: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-427-1637
Loop Clamp

144271637
MBEU64513-6: RNCC: 3 | RNVC: 2
035635: RNCC: 5 | RNVC: 2

6 Oct 1988

5340-14-448-4707
Mounting Bracket

144484707
27110136-5: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-14-489-3828
Access Cover

144893828
380756-1: RNCC: 3 | RNVC: 9

16 Jul 1997

5340-14-443-9626
Rod End Connector

144439626
H107714: RNCC: 3 | RNVC: 2

17 Dec 1990

5340-14-521-8550
Metal Grille

145218550
2038 99 A 8509: RNCC: 3 | RNVC: 2

20 Sep 2000

5340-14-551-5492
Rod End Clevis

145515492
205871-0: RNCC: 3 | RNVC: 2

29 Sep 2006

5340-14-336-3195
Runner

143363195
13753: RNCC: 3 | RNVC: 2
522418: RNCC: 5 | RNVC: 2
EU550: RNCC: 5 | RNVC: 2

24 Jul 1976

5340-14-268-9903
Handwheel

142689903
000MA0060F6-4N1: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-371-5936
Bridge Clamp

143715936
TS82809: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-548-4956
Mounting Bracket

145484956
7420845401: RNCC: 3 | RNVC: 2

23 Jan 2006

5340-14-449-2802
Mounting Bracket

144492802
386315H: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-419-0995
Angle Bracket

144190995
0319770600: RNCC: 3 | RNVC: 2

30 Sep 1987

5340-14-449-4234
Retaining Strap

144494234
4CM2809A: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-526-4475
Mounting Plate

145264475
RA1M702502803: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-548-5954
Angle Bracket

145485954
RA1B702206033: RNCC: 3 | RNVC: 2

26 Jan 2006

5340-14-474-2921
Mounting Bracket

144742921
AT004PD005301: RNCC: 3 | RNVC: 9

8 Feb 1995

5340-14-551-2549
Angle Bracket

145512549
RA1B216901061: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-472-3244
Mounting Bracket

144723244
DHV1267: RNCC: 3 | RNVC: 2

19 Oct 1994

5340-14-263-6935
Retaining Strap

142636935
C51499: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-360-1631
Angle Bracket

143601631
A11A221174002A1: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-553-6834
Mounting Plate

145536834
82089415000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-548-1013
Mounting Bracket

145481013
RA1A701226111: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-523-5253
Runner

145235253
C0053: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-14-442-7002
Loop Clamp

144427002
91365716: RNCC: 1 | RNVC: 2
COLLIERRS5TYPEC18: RNCC: 3 | RNVC: 2

24 Oct 1990

5340-14-400-0723
Butt Hinge

144000723
212809: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-522-2361
Retaining Band

145222361
1MP50045033: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-14-553-6841
Mounting Bracket

145536841
82096333000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-530-9809
Pipe Hanger

145309809
RPL711400095B1: RNCC: 3 | RNVC: 2

18 Jul 2002

5340-14-573-0952
Utility Access Door

145730952
SPP1365138: RNCC: 3 | RNVC: 2

12 Sep 2012

5340-14-454-0688
Bridge Clamp

144540688
16295745: RNCC: 3 | RNVC: 2
16295745: RNCC: 5 | RNVC: 9

19 Mar 1992

5340-14-457-5148
Bumper

144575148
640507: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-407-3949
Rod End Connector

144073949
42687: RNCC: 3 | RNVC: 2

12 Feb 1986

5340-14-474-7757
Mounting Plate

144747757
105889: RNCC: 3 | RNVC: 2

1 Mar 1995

5340-14-499-8249
Mounting Plate

144998249
60904-0: RNCC: 3 | RNVC: 2
60904.0: RNCC: 3 | RNVC: 2
F300 0T 023 8154: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-270-6372
Loop Clamp

142706372
17-7-3492: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-439-9045
Mounting Bracket

144399045
8-0310FZ: RNCC: 3 | RNVC: 2

5 Jun 1990

5340-14-351-5513
Bridge Clamp

143515513
0128: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-480-9994
Mounting Bracket

144809994
D1030400: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-14-402-9727
Synchro Clamp

144029727
050B00-519032M: RNCC: 3 | RNVC: 2

25 Jul 1985

5340-14-520-4758
Mounting Bracket

145204758
10426050: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-400-5715
Bumper

144005715
372783: RNCC: 3 | RNVC: 2
372783: RNCC: 5 | RNVC: 9

8 May 1985

5340-14-439-1983
Mounting Bracket

144391983
16009766: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-479-6726
Dashpot

144796726
91535: RNCC: 3 | RNVC: 2

31 Jan 1996

5340-14-516-1344
Mounting Bracket

145161344
7614-9404008: RNCC: 3 | RNVC: 9

10 Sep 1999

5340-14-305-3535
Control Rod

143053535
TH20C305: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-483-5862
Turnbuckle Body

144835862
7700627699: RNCC: 3 | RNVC: 2

19 Sep 1996

5340-14-437-3910
Swivel Caster

144373910
183100ABTS: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-043-1443
Bumper

140431443
065U20-719778B: RNCC: 3 | RNVC: 2

10 Apr 1984

5340-14-504-6291
Mounting Plate

145046291
F00147751: RNCC: 3 | RNVC: 2
F00147751: RNCC: 5 | RNVC: 9

25 Feb 1998

5340-14-349-9318
Runner

143499318
131326: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-450-2839
Retaining Clip

144502839
PM1A249543100: RNCC: 3 | RNVC: 2
PM1A249543100: RNCC: 5 | RNVC: 2

25 Sep 1991

5340-14-503-0205
Lock Key

145030205
E7411132: RNCC: 3 | RNVC: 9

17 Dec 1997

5340-14-460-6649
Mounting Bracket

144606649
TNS1A3704A: RNCC: 3 | RNVC: 2

4 Feb 1993

5340-14-418-1207
Rod End Clevis

144181207
059100G01TRA: RNCC: 3 | RNVC: 2
059100G: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-539-8371
Utility Access Door

145398371
67000061: RNCC: 3 | RNVC: 2
SYQ4733: RNCC: 5 | RNVC: 2

11 Feb 2004

5340-14-412-6277
Access Cover

144126277
15457362: RNCC: 3 | RNVC: 2
15457362: RNCC: 5 | RNVC: 9

15 Oct 1986

5340-14-263-8049
Access Cover

142638049
24030030500: RNCC: 3 | RNVC: 2
30J305: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-540-5917
Access Cover

145405917
61018538AA: RNCC: 3 | RNVC: 2

7 Apr 2004

5340-14-520-4110
Rigid Caster

145204110
900165: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-416-6830
Runner

144166830
412802110700: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-504-7911
Lock Key

145047911
64533: RNCC: 3 | RNVC: 2

4 Mar 1998

5340-14-437-4243
Mounting Plate

144374243
3005024: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-476-6845
Angle Bracket

144766845
0894706T00: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-14-512-8013
Access Cover

145128013
168847: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-454-6139
Access Cover

144546139
45605837: RNCC: 3 | RNVC: 2

8 Apr 1992

5340-14-315-6191
Angle Bracket

143156191
006A474: RNCC: 3 | RNVC: 2
006A474: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-320-2993
Access Cover

143202993
0064712300: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-394-9690
Angle Bracket

143949690
20321116: RNCC: 3 | RNVC: 2
20321116: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-418-5114
Access Cover

144185114
15705713: RNCC: 3 | RNVC: 2
15705713: RNCC: 5 | RNVC: 9

26 Aug 1987

5340-14-522-2337
Access Cover

145222337
719988: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-14-237-5256
Access Cover

142375256
70879812: RNCC: 3 | RNVC: 2
828B217: RNCC: 5 | RNVC: 2
70879812: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-521-3033
Utility Access Door

145213033
10530609: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-522-0402
Loop Clamp

145220402
45819693: RNCC: 3 | RNVC: 2

29 Sep 2000

5340-14-295-1113
Access Cover

142951113
277502: RNCC: 3 | RNVC: 2
277502: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-488-1486
Access Cover

144881486
0177830020: RNCC: 3 | RNVC: 2

18 Apr 1997

5340-14-498-4922
Access Cover

144984922
91971443: RNCC: 3 | RNVC: 2
M80400548932D: RNCC: 3 | RNVC: 2
F300 0T 005 3219: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-552-3876
Utility Access Door

145523876
19226180: RNCC: 3 | RNVC: 2

18 Dec 2006

5340-14-552-1032
Access Cover

145521032
0249158230: RNCC: 3 | RNVC: 2

27 Nov 2006

5340-14-377-1158
Access Cover

143771158
1480500056: RNCC: 3 | RNVC: 2
1480500056: RNCC: 3 | RNVC: 2
1480500056: RNCC: 5 | RNVC: 9
DAH1480500056: RNCC: 5 | RNVC: 9

17 May 1982

5340-14-382-9749
Anchor Strap

143829749
148196-41: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-529-4161
Access Cover

145294161
10591152: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-449-3196
Access Cover

144493196
566A010003: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-396-5232
Angle Bracket

143965232
214013: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-448-9485
Access Cover

144489485
1013763Y00: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-14-220-8786
Strap Fastener Loop

142208786
NO PRIMARY REF14-220-8786: RNCC: 3 | RNVC: 2
60295: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-458-7364
Arched Cushion

144587364
F0143-009F18TAB2DE114,3: RNCC: 3 | RNVC: 2
MAT169-0012F21DE114,3: RNCC: 3 | RNVC: 2

29 Oct 1992

5340-14-341-8767
Retaining Strap

143418767
M3R702-090: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-399-7122
Bumper

143997122
7199-064D: RNCC: 3 | RNVC: 2
NL7199-064/D: RNCC: 5 | RNVC: 2

6 Mar 1985

5340-14-435-6482
Bumper

144356482
ATO70IN77: RNCC: 3 | RNVC: 2
85-693-7901: RNCC: 6 | RNVC: 9

15 Nov 1989

5340-14-330-7238
Loop Clamp

143307238
4C1143: RNCC: 3 | RNVC: 2
RA40434: RNCC: 5 | RNVC: 2
86-258-0381: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-406-2443
Webbing Strap

144062443
8499-15: RNCC: 3 | RNVC: 2
7920072668: RNCC: 5 | RNVC: 2

8 Jan 1986

5340-14-335-7882
Loop Clamp

143357882
330A27-4237-22: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-358-9453
Bail Handle

143589453
NO PRIMARY REF14-358-9453: RNCC: 3 | RNVC: 2
11176-4: RNCC: 5 | RNVC: 9

7 Sep 1979

5340-14-366-5121
Angle Bracket

143665121
069-03-110: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-344-0605
Friction Catch

143440605
1554-1024A: RNCC: 3 | RNVC: 2

13 Jul 1977

5340-14-474-0989
Runner

144740989
F7987 5213-89: RNCC: 3 | RNVC: 9

25 Jan 1995

5340-14-442-8314
Handwheel

144428314
ESM13-145-200-20: RNCC: 3 | RNVC: 2
ESM13-145-200-20: RNCC: 5 | RNVC: 2
13-145-200-20: RNCC: 5 | RNVC: 2

6 Nov 1990

5340-14-462-9252
Mounting Bracket

144629252
703A94-0006-00: RNCC: 3 | RNVC: 2

7 May 1993

5340-14-483-9065
Metal Grille

144839065
MAT853-0120DN150: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-14-485-5722
Mounting Bracket

144855722
332A91-0050-11: RNCC: 3 | RNVC: 2

29 Jan 1997

5340-14-406-9039
Webbing Strap

144069039
N1803-1-4METRES-MANUTAN: RNCC: 3 | RNVC: 2

14 Jan 1986

5340-14-400-7857
Angle Bracket

144007857
121E71-528-42-0: RNCC: 3 | RNVC: 2

21 May 1985

5340-14-461-4423
Rod End Connector

144614423
262-12-23161-02: RNCC: 3 | RNVC: 2
85-694-5689: RNCC: 6 | RNVC: 9

10 Mar 1993

5340-14-438-4458
Loop Clamp

144384458
2B10-O-05: RNCC: 3 | RNVC: 2
91521159: RNCC: 5 | RNVC: 2

21 Mar 1990

5340-14-355-3190
Swivel Caster

143553190
3082AC353: RNCC: 3 | RNVC: 9

19 Mar 1979

5340-14-460-2274
Strapping Seal

144602274
406313A: RNCC: 3 | RNVC: 9

18 Jan 1993

5340-14-452-5778
Mounting Plate

144525778
CL2271: RNCC: 3 | RNVC: 2

14 Jan 1992

5340-14-416-8014
Mounting Plate

144168014
2028: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-537-5207
Mounting Plate

145375207
12229: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-463-3339
Mounting Bracket

144633339
7700675042: RNCC: 3 | RNVC: 2

9 Jun 1993

5340-14-461-6725
Mounting Bracket

144616725
0000707638: RNCC: 3 | RNVC: 2
TID25148: RNCC: 5 | RNVC: 2

22 Mar 1993

5340-14-505-0547
Mounting Plate

145050547
5010119965: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-462-2668
Vent Plug

144622668
C57363-20R1: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-14-445-8733
Dashpot

144458733
017-0057: RNCC: 3 | RNVC: 2

27 Feb 1991

5340-14-527-9626
Bail Handle

145279626
457-02712-000: RNCC: 3 | RNVC: 2
457-02712-000: RNCC: 5 | RNVC: 2

5 Dec 2001

5340-14-401-4390
Angle Bracket

144014390
3265-22: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-276-4583
Loop Clamp

142764583
3160S86-30-010-1: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-332-0903
Retaining Strap

143320903
8500-750: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-481-9009
Mounting Plate

144819009
AEAV000101-4210: RNCC: 3 | RNVC: 2
AEAV000101-421B: RNCC: 5 | RNVC: 2

6 Jun 1996

5340-14-434-3806
Mounting Bracket

144343806
332A41-1032-36: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-533-8611
Cover Strip

145338611
12-250-225: RNCC: 3 | RNVC: 2
SZ12.250.225: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-508-7988
Loop Clamp

145087988
LNG316-16PA: RNCC: 3 | RNVC: 2
00129666: RNCC: 5 | RNVC: 9

30 Sep 1998

5340-14-010-0345
Loop Clamp

140100345
3130S47-03-140: RNCC: 3 | RNVC: 2

1 Jan 1961

5340-14-381-8662
Doorstop

143818662
NO PRIMARY REF14-381-8662: RNCC: 3 | RNVC: 2
16932331: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-572-9335
Utility Resilient Mount

145729335
HH14-30CIM: RNCC: 3 | RNVC: 2

29 Aug 2012

5340-14-351-0801
Retaining Strap

143510801
7-095-273: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-298-8473
Rod End Clevis

142988473
456336397: RNCC: 3 | RNVC: 9

1 Jan 1973

5340-14-475-0245
Rod End Clevis

144750245
255036: RNCC: 3 | RNVC: 2
124661: RNCC: 5 | RNVC: 2

16 Mar 1995

5340-14-445-0501
Retaining Strap

144450501
23624: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-14-422-4116
Access Cover

144224116
BJM00783P: RNCC: 3 | RNVC: 2

3 Mar 1988

5340-14-489-5345
Access Cover

144895345
20625349: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-14-521-8514
Access Cover

145218514
TS148102: RNCC: 3 | RNVC: 2

20 Sep 2000

5340-14-353-5229
Rigid Caster

143535229
10050EVEREST: RNCC: 3 | RNVC: 2
D246N: RNCC: 5 | RNVC: 2
D246Z: RNCC: 5 | RNVC: 2

16 Jan 1979

5340-14-431-2051
Shelf Bracket

144312051
X553492: RNCC: 3 | RNVC: 2

11 Apr 1989

5340-14-365-1156
Loop Clamp

143651156
16690760: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-14-368-3504
Access Cover

143683504
22373928: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-14-362-2509
Bow Handle

143622509
A11A222210200A2: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-462-6968
Rod End Clevis

144626968
160151: RNCC: 3 | RNVC: 2
89169704: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-554-5410
Access Cover

145545410
0074940180: RNCC: 3 | RNVC: 2

18 Jul 2007

5340-14-454-1039
Access Cover

144541039
16508753: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-525-7340
Bow Handle

145257340
SZ10.056.00: RNCC: 3 | RNVC: 2
20 242 160 5820: RNCC: 5 | RNVC: 2
10.056.00: RNCC: 5 | RNVC: 2

14 Jun 2001

5340-14-496-5981
Access Cover

144965981
0000752969: RNCC: 3 | RNVC: 2
F300 0T 021 7679: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-211-5275
Retaining Strap

142115275
FL146535: RNCC: 3 | RNVC: 2
14535: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-447-1789
Push Door Plate

144471789
NGS1A1109: RNCC: 3 | RNVC: 2

3 May 1991

5340-14-356-4780
Loop Clamp

143564780
427475: RNCC: 3 | RNVC: 2
427475: RNCC: 5 | RNVC: 9

15 May 1979

5340-14-532-6119
Blank Panel

145326119
20072909: RNCC: 3 | RNVC: 2

20 Nov 2002

5340-14-375-9336
Angle Bracket

143759336
5586P: RNCC: 3 | RNVC: 9
5586: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-307-1169
Loop Clamp

143071169
205697: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-547-8331
Mounting Bracket

145478331
V001065: RNCC: 3 | RNVC: 2

17 Nov 2005

5340-14-506-2774
Loop Clamp

145062774
8007255M00: RNCC: 3 | RNVC: 2

20 Apr 1998

5340-14-544-6103
Surface Bolt

145446103
073233987000010: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-14-518-1128
Loop Clamp

145181128
5000659918: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-416-4354
Plug Button

144164354
0805035F02: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-14-501-8997
Door Holder

145018997
S7082898: RNCC: 3 | RNVC: 2

19 Nov 1997

5340-14-500-8648
Mounting Bracket

145008648
D66101000011: RNCC: 3 | RNVC: 2
F300 0T 024 8851: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-395-9705
Retaining Strap

143959705
230853: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-550-4834
Mounting Bracket

145504834
RA1A702436163: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-556-1866
Mounting Bracket

145561866
10643732001: RNCC: 3 | RNVC: 2

11 Feb 2008

5340-14-516-3653
Mounting Bracket

145163653
CV18312: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-451-5136
Bow Handle

144515136
927117: RNCC: 3 | RNVC: 2

21 Nov 1991

5340-14-515-8663
Mounting Bracket

145158663
46038696: RNCC: 3 | RNVC: 2

18 Aug 1999

5340-14-539-5550
Utility Access Door

145395550
SZ09.425.500G: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-389-9273
Buckle

143899273
005447013P: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-508-6588
Mounting Bracket

145086588
COCOT94739X00: RNCC: 3 | RNVC: 2

23 Sep 1998

5340-14-454-5300
Webbing Strap

144545300
16930719: RNCC: 3 | RNVC: 2

2 Apr 1992

5340-14-545-0413
Mounting Bracket

145450413
5010530611: RNCC: 3 | RNVC: 2

16 Mar 2005

5340-14-278-3375
Lock-Release Lever

142783375
160-18198: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-454-0760
Angle Bracket

144540760
16211875: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-311-3633
Retaining Band

143113633
189217: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-487-5593
Turnbuckle Body

144875593
43905DG0853D: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-436-1918
Retaining Strap

144361918
DA2C212102119: RNCC: 3 | RNVC: 2

6 Dec 1989

5340-14-549-8479
Mounting Bracket

145498479
F1262953: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-531-6840
Mounting Bracket

145316840
1003494: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-14-554-8864
Loop Clamp

145548864
78651DH12AS: RNCC: 1 | RNVC: 2
78651DH12AS: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-514-0406
Section Block Clamp

145140406
PM1A742699011: RNCC: 3 | RNVC: 2
PM1A742699011: RNCC: 5 | RNVC: 2

22 Apr 1999

5340-14-532-3568
Angle Bracket

145323568
RA1B216711741: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-461-2788
Mounting Bracket

144612788
4772902080: RNCC: 3 | RNVC: 2
5045996: RNCC: 5 | RNVC: 9

3 Mar 1993

5340-14-291-1366
Buckle

142911366
2273: RNCC: 3 | RNVC: 9
1615519C: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-554-9408
Loop Clamp

145549408
78651DH10BF: RNCC: 1 | RNVC: 2
78651DH10BF: RNCC: 3 | RNVC: 2

11 Sep 2007

5340-14-425-6527
Angle Bracket

144256527
N109715: RNCC: 3 | RNVC: 2

20 Jul 1988

5340-14-554-8854
Loop Clamp

145548854
78651RH30CP: RNCC: 1 | RNVC: 2
78651RH30CP: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-555-4098
Loop Clamp

145554098
78651DH13AS: RNCC: 1 | RNVC: 2
78651DH13AS: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-14-521-5726
Mounting Bracket

145215726
160-888265: RNCC: 3 | RNVC: 2

23 Aug 2000

5340-14-464-8873
Mounting Bracket

144648873
312-10626-001: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-493-6469
Loop Holder

144936469
J05085-02-0320: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-341-8507
Retaining Strap

143418507
M3R704-245: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-375-9714
Mounting Plate

143759714
NO PRIMARY REF14-375-9714: RNCC: 3 | RNVC: 2
404402135: RNCC: 5 | RNVC: 2
404402135: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-534-5329
Bow Handle

145345329
11-512-20-112: RNCC: 3 | RNVC: 2

26 Mar 2003

5340-14-321-8226
Sliding Door Track

143218226
3160S21-12-501: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-518-2080
Cover Strip

145182080
307-246-901-0: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-307-4989
Angle Bracket

143074989
E4M703-18-831: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-461-6448
Magnetic Catch

144616448
CF22-1WGRIS: RNCC: 3 | RNVC: 2

19 Mar 1993

5340-14-454-8755
Mounting Bracket

144548755
5000418419: RNCC: 3 | RNVC: 2

24 Apr 1992

5340-14-328-7444
Rod End Clevis

143287444
4027412: RNCC: 3 | RNVC: 2
4027412: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-402-2062
Rim Lock Set

144022062
GAM031500111: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-543-7244
Loop Clamp

145437244
560904010: RNCC: 3 | RNVC: 2

4 Dec 2004

5340-14-320-2940
Access Cover

143202940
0064710630: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-442-0415
Mounting Plate

144420415
3511 271 85701: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-226-5870
Mending Plate

142265870
304809: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-487-5536
Angle Bracket

144875536
78721DH24A: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-363-7310
Mending Plate

143637310
108065152201: RNCC: 3 | RNVC: 2
108065152201: RNCC: 5 | RNVC: 2

6 Jul 1980

5340-14-526-0456
Mounting Bracket

145260456
10605998: RNCC: 3 | RNVC: 2

28 Jun 2001

5340-14-348-9739
Padlock

143489739
1322AJAXC1-40: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-14-486-1911
Mounting Bracket

144861911
30631002: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-460-9950
Mounting Bracket

144609950
5000991193: RNCC: 3 | RNVC: 2

17 Feb 1993

5340-14-475-3576
Arched Cushion

144753576
631902862: RNCC: 3 | RNVC: 2
2862P70M: RNCC: 5 | RNVC: 2

29 Mar 1995

5340-14-542-3030
Mounting Plate

145423030
973213908: RNCC: 3 | RNVC: 2
973213908: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-472-3758
Pipe Hanger

144723758
PM1A524244002: RNCC: 3 | RNVC: 2
PM1A524244002: RNCC: 5 | RNVC: 2

19 Oct 1994

5340-14-411-6569
Butt Hinge

144116569
H4003ALU30: RNCC: 3 | RNVC: 2

27 Aug 1986

5340-14-545-2222
Mounting Bracket

145452222
T943A2001128: RNCC: 3 | RNVC: 2

24 Mar 2005

5340-14-244-0447
Mending Plate

142440447
370148: RNCC: 3 | RNVC: 2
370148: RNCC: 6 | RNVC: 9

1 Jan 1968

5340-14-448-9092
Magnetic Catch

144489092
16-7-3490: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-14-321-6697
Loop Clamp

143216697
0235487140: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-413-7008
Angle Bracket

144137008
412702020012: RNCC: 3 | RNVC: 2

15 Jan 1987

5340-14-535-2282
Webbing Strap

145352282
4804SP240: RNCC: 3 | RNVC: 2
4804SP240: RNCC: 5 | RNVC: 2

14 May 2003

5340-14-430-9062
Loop Holder

144309062
226712: RNCC: 3 | RNVC: 2
89409412: RNCC: 5 | RNVC: 2

29 Mar 1989

5340-14-386-0306
Flush Lock

143860306
005328010P: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-518-9935
Mounting Plate

145189935
707467: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-472-5562
Bumper

144725562
A58788: RNCC: 3 | RNVC: 2

3 Nov 1994

5340-14-469-3995
Protection Bellows

144693995
2F105207REP442: RNCC: 3 | RNVC: 2

20 Apr 1994

5340-14-467-0145
Butt Hinge

144670145
1956M: RNCC: 3 | RNVC: 2

15 Dec 1993

5340-14-462-7396
Pipe Hanger

144627396
PM1A722114001: RNCC: 3 | RNVC: 2
PM1A722114001: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-486-0147
Lever Bracket

144860147
PM1A761121066: RNCC: 3 | RNVC: 2
PM1A761121066: RNCC: 5 | RNVC: 2

26 Feb 1997

5340-14-550-4793
Angle Bracket

145504793
RA1A702856003: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-545-6911
Angle Bracket

145456911
RA1A703856375: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-411-2972
Loop Clamp

144112972
44681: RNCC: 3 | RNVC: 9
44681: RNCC: 5 | RNVC: 9

6 Aug 1986

5340-14-529-0756
Leakproof Seal Plug

145290756
704407: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-14-467-9688
Mounting Plate

144679688
1068747W00: RNCC: 3 | RNVC: 2

2 Feb 1994

5340-14-550-9204
Angle Bracket

145509204
RA1M701327191: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-545-0248
Mounting Bracket

145450248
T623G3004226: RNCC: 3 | RNVC: 2

15 Mar 2005

5340-14-411-4333
Wiring Harness

144114333
A11A822210160: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-210-6589
Retaining Strap

142106589
0000133049: RNCC: 3 | RNVC: 2
0000133049: RNCC: 5 | RNVC: 9
133049: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-518-1753
Retaining Band

145181753
5010138459: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-360-3069
Retaining Band

143603069
A93031: RNCC: 3 | RNVC: 2
A93031: RNCC: 5 | RNVC: 2
A93031: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-238-9800
Retaining Strap

142389800
57779: RNCC: 3 | RNVC: 9
062057779: RNCC: 5 | RNVC: 9
711982: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-419-2112
Loop Clamp

144192112
CH: RNCC: 3 | RNVC: 2

14 Oct 1987

5340-14-429-8605
Mounting Plate

144298605
61952: RNCC: 3 | RNVC: 2
61952: RNCC: 5 | RNVC: 2

15 Feb 1989

5340-14-440-8742
Rim Lock Set

144408742
PE75029-6: RNCC: 3 | RNVC: 2

31 Jul 1990

5340-14-242-5810
Loop Clamp

142425810
511131050211: RNCC: 3 | RNVC: 2
35G21: RNCC: 5 | RNVC: 2
982267: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-448-4705
Angle Bracket

144484705
27110007-9: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-14-348-5826
Runner

143485826
N745050342: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-14-457-8838
Pawl Fastener

144578838
02864615D21A: RNCC: 3 | RNVC: 2

24 Sep 1992

5340-14-322-9203
Angle Bracket

143229203
177896: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-323-3019
Loop Clamp

143233019
R33945SMREP23: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-433-9122
Access Cover

144339122
RP988715: RNCC: 3 | RNVC: 2
0779820D00: RNCC: 5 | RNVC: 2

22 Aug 1989

5340-14-358-7227
Access Cover

143587227
50MS087: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-320-2835
Loop Clamp

143202835
70860: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-391-6439
Angle Bracket

143916439
51500: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-480-8411
Synchro Clamp

144808411
065985D: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-14-432-9791
Surface Bolt

144329791
PLU20H7: RNCC: 3 | RNVC: 2

5 Jul 1989

5340-14-520-1684
Mounting Bracket

145201684
20859911: RNCC: 3 | RNVC: 2
20859911: RNCC: 3 | RNVC: 9

17 May 2000

5340-14-476-0985
Mounting Plate

144760985
222-3018-660: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-452-2603
Stand Base

144522603
000469A: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-459-8531
Mounting Bracket

144598531
101A104629: RNCC: 3 | RNVC: 2
A104629: RNCC: 5 | RNVC: 2
101A104629: RNCC: 5 | RNVC: 9

17 Dec 1992

5340-14-504-9918
Compression Cup

145049918
5000670749: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-551-3453
Angle Bracket

145513453
RA1M701626142: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-455-7757
Mounting Bracket

144557757
0000720454: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-454-6876
Retaining Band

144546876
61418: RNCC: 3 | RNVC: 2
89473435: RNCC: 5 | RNVC: 2

9 Apr 1992

5340-14-434-5163
Webbing Strap

144345163
70515: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-549-9767
Angle Bracket

145499767
F1262588: RNCC: 3 | RNVC: 2

22 May 2006

5340-14-513-8548
Bumper

145138548
639517: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-460-9967
Angle Bracket

144609967
5000995248: RNCC: 3 | RNVC: 2

17 Feb 1993

5340-14-528-3838
Permanent Magnet

145283838
01706040: RNCC: 3 | RNVC: 2
01708040: RNCC: 5 | RNVC: 9

24 Jan 2002

5340-14-439-6741
Angle Bracket

144396741
16379406: RNCC: 3 | RNVC: 2
16379406: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-552-0420
Angle Bracket

145520420
0249921170: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-14-354-0047
Angle Bracket

143540047
A11A232010044: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-406-0343
Loop Clamp

144060343
M04VW3121343303: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-497-9717
Vent Plug

144979717
413: RNCC: 3 | RNVC: 2

29 Oct 1997

5340-14-520-0147
Mounting Plate

145200147
10564657: RNCC: 3 | RNVC: 2

3 May 2000

5340-14-510-2993
Webbing Strap

145102993
360129: RNCC: 3 | RNVC: 2
1730AA8019089: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-451-2133
Rod End Clevis

144512133
PM1A379116032: RNCC: 3 | RNVC: 2
PM1A379116032: RNCC: 5 | RNVC: 2

6 Nov 1991

5340-14-453-5612
Mounting Bracket

144535612
623998: RNCC: 3 | RNVC: 2

26 Feb 1992

5340-14-357-9258
Retaining Strap

143579258
TLH0TH536: RNCC: 3 | RNVC: 2
TLHOTH536: RNCC: 5 | RNVC: 2

20 Jul 1979

5340-14-508-5571
Metal Grille

145085571
372036: RNCC: 3 | RNVC: 2

16 Sep 1998

5340-14-392-8530
Angle Bracket

143928530
224379: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-370-5481
Angle Bracket

143705481
21103777: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-475-5052
Mounting Bracket

144755052
TB1030101F018: RNCC: 3 | RNVC: 2
TB1030101-00SPF018: RNCC: 5 | RNVC: 2
08-60-0043: RNCC: 5 | RNVC: 9

12 Apr 1995

5340-14-301-6183
Expansion Plug

143016183
8001-04: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-518-1513
Loop Clamp

145181513
5003083922: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-537-4451
Mounting Bracket

145374451
MECZ6858: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-533-9073
Loop Clamp

145339073
95695: RNCC: 3 | RNVC: 2

27 Feb 2003

5340-14-396-2254
Mounting Plate

143962254
216895: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-469-6397
Section Block Clamp

144696397
PM1A572250002: RNCC: 3 | RNVC: 2
PM1A572250002: RNCC: 5 | RNVC: 2

4 May 1994

5340-14-367-9606
Cushioning Pad

143679606
79096810: RNCC: 3 | RNVC: 2
79096810: RNCC: 5 | RNVC: 9

19 Jan 1981

5340-14-497-8994
Access Cover

144978994
0315160610: RNCC: 3 | RNVC: 2

22 Oct 1997

5340-14-429-4410
Access Cover

144294410
0056014400: RNCC: 3 | RNVC: 2
56014400: RNCC: 5 | RNVC: 2
560144: RNCC: 5 | RNVC: 2
144: RNCC: 5 | RNVC: 9

23 Jan 1989

5340-14-499-1142
Door Holder

144991142
24-37828C0: RNCC: 3 | RNVC: 2
Y00004084: RNCC: 5 | RNVC: 2
F300 0T 018 3253: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-462-0823
Access Cover

144620823
Z89002023: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-553-4381
Access Cover

145534381
0177800390: RNCC: 3 | RNVC: 2

4 Apr 2007

5340-14-500-7200
Access Cover

145007200
10301554: RNCC: 3 | RNVC: 2
F300 0T 024 7394: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-537-4661
Cover Strip

145374661
6501JPS110001: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-449-6383
Mounting Bracket

144496383
623713: RNCC: 3 | RNVC: 2

28 Aug 1991

5340-14-554-6729
Mounting Plate

145546729
MB200144: RNCC: 3 | RNVC: 2

2 Aug 2007

5340-14-463-5325
Loop Clamp

144635325
0000154484: RNCC: 3 | RNVC: 2
TID19615: RNCC: 5 | RNVC: 2

17 Jun 1993

5340-14-476-9547
Cover Strip

144769547
RA1M246510205N1: RNCC: 3 | RNVC: 2

12 Jul 1995

5340-14-546-6040
Retaining Strap

145466040
RPL741300033B1: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-14-550-2307
Mounting Plate

145502307
82126889000: RNCC: 3 | RNVC: 2

12 Jun 2006

5340-14-385-9768
Webbing Strap

143859768
5000607406: RNCC: 3 | RNVC: 2
5000607406: RNCC: 5 | RNVC: 9

24 Aug 1983

5340-14-297-6446
Retaining Clip

142976446
134169: RNCC: 3 | RNVC: 9
2285: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-482-0946
Angle Bracket

144820946
22398446: RNCC: 3 | RNVC: 2
22398446: RNCC: 5 | RNVC: 9

20 Jun 1996

5340-14-482-1105
Angle Bracket

144821105
38511116: RNCC: 3 | RNVC: 2
38511116: RNCC: 5 | RNVC: 9

20 Jun 1996

5340-14-484-8039
Angle Bracket

144848039
XMJ-Z05: RNCC: 3 | RNVC: 2
91769776: RNCC: 5 | RNVC: 2
91769776: RNCC: 5 | RNVC: 2

5 Dec 1996

5340-14-533-2445
Loop Clamp

145332445
P106975VD: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-381-5214
Webbing Strap

143815214
NH25RE360: RNCC: 3 | RNVC: 2
219118: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-423-0480
Angle Bracket

144230480
721100640: RNCC: 3 | RNVC: 2
89174162: RNCC: 5 | RNVC: 2
721100640: RNCC: 5 | RNVC: 9

31 Mar 1988

5340-14-438-8818
Butt Hinge

144388818
TB10303: RNCC: 3 | RNVC: 2

11 Apr 1990

5340-14-551-9842
Mounting Bracket

145519842
82179448000: RNCC: 3 | RNVC: 2

15 Nov 2006

5340-14-403-3326
Retaining Strap

144033326
206311: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-545-7965
Mounting Bracket

145457965
077165: RNCC: 3 | RNVC: 2

16 May 2005

5340-14-448-3898
Swivel Caster

144483898
1388NEABATBD200: RNCC: 3 | RNVC: 9
MPR1388NEABATBD200: RNCC: 5 | RNVC: 9

26 Jun 1991

5340-14-303-8381
Bow Handle

143038381
1912: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-521-8525
Metal Grille

145218525
ZS6211: RNCC: 3 | RNVC: 2

20 Sep 2000

5340-14-480-1057
Bolt And Spacer Kit

144801057
RA1M261037713: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-380-6308
Tubular Fairlead

143806308
20116070: RNCC: 3 | RNVC: 2

29 Nov 1982

5340-14-542-6331
Mounting Bracket

145426331
S711A8022404: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-14-534-0712
Webbing Strap

145340712
J00006780B: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-277-3421
Angle Bracket

142773421
0249853250: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-421-6033
Webbing Strap

144216033
29744477: RNCC: 3 | RNVC: 2
29744477: RNCC: 5 | RNVC: 9

20 Jan 1988

5340-14-478-0554
Loop Clamp

144780554
6386001: RNCC: 3 | RNVC: 2

11 Oct 1995

5340-14-444-2088
Wiring Harness

144442088
A11A822210190A2: RNCC: 3 | RNVC: 2

18 Dec 1990

5340-14-414-7992
Angle Bracket

144147992
221078: RNCC: 3 | RNVC: 2

12 Mar 1987

5340-14-554-8869
Loop Clamp

145548869
78651DH28AG: RNCC: 1 | RNVC: 2
78651DH28AG: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-471-5994
Loop Clamp

144715994
NSA5516CA14NV: RNCC: 3 | RNVC: 2
NSA5516CA14NV: RNCC: 5 | RNVC: 2

7 Sep 1994

5340-14-485-5361
Threaded Rod End

144855361
15154854: RNCC: 3 | RNVC: 2

29 Jan 1997

5340-14-522-3203
Retaining Strap

145223203
10469299: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-14-457-3618
Mounting Bracket

144573618
45056142: RNCC: 3 | RNVC: 2
45056142: RNCC: 5 | RNVC: 9

27 Aug 1992

5340-14-364-5839
Lock-Release Lever

143645839
90029: RNCC: 3 | RNVC: 9
5000502549: RNCC: 5 | RNVC: 2
5000502549: RNCC: 5 | RNVC: 9
EC1530: RNCC: 5 | RNVC: 9
5000113720: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-531-2408
Angle Bracket

145312408
F1264730: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-285-5347
Mounting Bracket

142855347
0000151252: RNCC: 3 | RNVC: 2
0000151252: RNCC: 5 | RNVC: 9
151252: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-306-7383
Control Rod

143067383
151127REP1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-536-9716
Lock Key

145369716
915486: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-476-0950
Angle Bracket

144760950
222-3119-500: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-518-0422
Mounting Bracket

145180422
03149: RNCC: 3 | RNVC: 2

21 Jan 2000

5340-14-325-9097
Key Blank

143259097
25511B3X4XC38: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-446-2086
Loop Clamp

144462086
0120720009: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-490-5965
Mounting Plate

144905965
A324880: RNCC: 3 | RNVC: 2
A324880: RNCC: 3 | RNVC: 9
5325AA2022032: RNCC: 6 | RNVC: 9

2 Oct 1997

5340-14-469-5393
Swivel Caster

144695393
1593514: RNCC: 3 | RNVC: 2
016322: RNCC: 5 | RNVC: 2
20-590016: RNCC: 5 | RNVC: 2

28 Apr 1994

5340-14-277-7288
Retaining Strap

142777288
9136459: RNCC: 3 | RNVC: 2
9136459: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-041-5505
Loop Clamp

140415505
926185: RNCC: 3 | RNVC: 2
926185: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-358-5774
Retaining Strap

143585774
A80718: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-482-7226
Mounting Bracket

144827226
1077128Y00: RNCC: 3 | RNVC: 2

25 Jul 1996

5340-14-464-2568
Runner

144642568
SMCFAATC0037A: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-358-6628
Control Rod

143586628
N21AAB38: RNCC: 3 | RNVC: 2
N21AAB38: RNCC: 5 | RNVC: 9

7 Sep 1979

5340-14-555-6164
Cable Retractor

145556164
FTAA73P14: RNCC: 3 | RNVC: 2

3 Dec 2007

5340-14-554-1757
Mounting Bracket

145541757
82090669000: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-549-4767
Mounting Bracket

145494767
0235707530: RNCC: 3 | RNVC: 2

7 Apr 2006

5340-14-344-2773
Retaining Strap

143442773
184201: RNCC: 3 | RNVC: 2

10 Aug 1977

5340-14-514-9353
Section Block Clamp

145149353
RA1M701934331: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-14-274-2603
Retaining Strap

142742603
155132: RNCC: 3 | RNVC: 2
5172093200: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-520-2638
Angle Bracket

145202638
203953: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-553-7989
Retaining Bail

145537989
123 030: RNCC: 3 | RNVC: 2
123 030: RNCC: 3 | RNVC: 2

22 May 2007

5340-14-336-7507
Webbing Strap

143367507
190288: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-399-5061
Detent Plunger

143995061
15151199: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-305-2778
Angle Bracket

143052778
26244366: RNCC: 3 | RNVC: 2
C244366: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-479-8536
Mounting Bracket

144798536
T1083AA22: RNCC: 3 | RNVC: 2
416276: RNCC: 5 | RNVC: 9
T1083AA22: RNCC: 5 | RNVC: 9

7 Feb 1996

5340-14-338-6904
Leaf Spring

143386904
5000001585: RNCC: 3 | RNVC: 2
5000001585: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-539-9717
Pipe Hanger

145399717
RA1B703146285A1: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-398-7396
Retaining Strap

143987396
0035656070: RNCC: 3 | RNVC: 2
0035656070: RNCC: 5 | RNVC: 9

6 Feb 1985

5340-14-427-0597
Handwheel

144270597
M4HZ745P2645: RNCC: 3 | RNVC: 2

6 Oct 1988

5340-14-218-0277
Angle Bracket

142180277
291M521211: RNCC: 3 | RNVC: 2
291M521211: RNCC: 5 | RNVC: 2

1 Jan 1965

5340-14-555-8648
Mounting Bracket

145558648
82395759000: RNCC: 3 | RNVC: 2

19 Dec 2007

5340-14-276-2745
Rod End Clevis

142762745
160-46111-01: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-535-1541
Access Cover

145351541
5010527082: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-448-9486
Access Cover

144489486
1013759S00: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-14-375-8411
Angle Bracket

143758411
NO PRIMARY REF14-375-8411: RNCC: 3 | RNVC: 2
16720230: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-447-6416
Access Cover

144476416
5000919876: RNCC: 3 | RNVC: 2

29 May 1991

5340-14-458-7669
Cushioning Pad

144587669
MN02/09-52: RNCC: 3 | RNVC: 2
MN04/09-52: RNCC: 5 | RNVC: 2

3 Nov 1992

5340-14-531-3954
Access Cover

145313954
4440702500: RNCC: 3 | RNVC: 2
8041111K00: RNCC: 5 | RNVC: 2

14 Aug 2002

5340-14-530-7627
Detent Plunger

145307627
95MS289-02: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-421-3732
Access Cover

144213732
39138921: RNCC: 3 | RNVC: 2

14 Jan 1988

5340-14-527-4310
Access Cover

145274310
V107080: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-341-1662
Loop Clamp

143411662
M3C700-20-20: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-361-4702
Access Cover

143614702
315249: RNCC: 3 | RNVC: 2
315249: RNCC: 5 | RNVC: 2
315249: RNCC: 5 | RNVC: 9

24 Jan 1980

5340-14-468-7142
Bridge Clamp

144687142
186-10486-800: RNCC: 3 | RNVC: 2
5000296313: RNCC: 5 | RNVC: 2

16 Mar 1994

5340-14-481-3807
Access Cover

144813807
256810: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-287-8995
Access Hole Frame

142878995
37436: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-369-9932
Plug Button

143699932
0527-02-07-26: RNCC: 3 | RNVC: 2
9609069052: RNCC: 5 | RNVC: 2

18 May 1981

5340-14-296-2866
Utility Access Door

142962866
0257507210: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-549-4938
Mounting Plate

145494938
MC201-215104-00: RNCC: 3 | RNVC: 2

11 Apr 2006

5340-14-279-6235
Loop Clamp

142796235
DC116: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-276-5803
Loop Clamp

142765803
3610-16: RNCC: 3 | RNVC: 2
3610: RNCC: 5 | RNVC: 2
3610-16IS0: RNCC: 5 | RNVC: 2
91274492: RNCC: 5 | RNVC: 2
99001430: RNCC: 5 | RNVC: 2
91274492: RNCC: 5 | RNVC: 9
99001430: RNCC: 5 | RNVC: 9
91274492: RNCC: 5 | RNVC: 9
99001430: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-356-5026
Retaining Strap

143565026
5171350300: RNCC: 3 | RNVC: 2
713503: RNCC: 5 | RNVC: 2

15 May 1979

5340-14-542-3739
Mounting Plate

145423739
10461060: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-14-278-4494
Clamping Catch

142784494
GP12ZB: RNCC: 3 | RNVC: 2
G12: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-540-2883
Mounting Plate

145402883
46038508: RNCC: 3 | RNVC: 2

18 Mar 2004

5340-14-398-1845
Retaining Strap

143981845
70665117: RNCC: 3 | RNVC: 2
70665117: RNCC: 5 | RNVC: 9

31 Jan 1985

5340-14-528-9456
Loop Clamp

145289456
EN4114F12WH0: RNCC: 2 | RNVC: 2

27 Feb 2002

5340-14-457-0199
Mounting Plate

144570199
723678: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-14-534-2900
Mounting Bracket

145342900
10657495: RNCC: 3 | RNVC: 2

19 Mar 2003

5340-14-515-6844
Sliding Block

145156844
W004525700: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-535-7596
Mounting Bracket

145357596
T945A2001231: RNCC: 3 | RNVC: 2

25 Jun 2003

5340-14-216-7086
Retaining Strap

142167086
HE60P1: RNCC: 3 | RNVC: 2
HE60P1: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-399-3857
Retaining Strap

143993857
79092896: RNCC: 3 | RNVC: 2
79092896: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-550-2286
Mounting Plate

145502286
10645970: RNCC: 3 | RNVC: 2

12 Jun 2006

5340-14-312-8870
Retaining Strap

143128870
160-79583D: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-530-9419
Retaining Strap

145309419
45679698: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-14-566-5132
Utility Resilient Mount

145665132
77716771B: RNCC: 3 | RNVC: 2
FS0001221: RNCC: 6 | RNVC: 9

22 Nov 2010

5340-14-363-9252
Threaded Rod End

143639252
574041070: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-455-9759
Arched Cushion

144559759
PM1A753191002: RNCC: 3 | RNVC: 2
PM1A753191002: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-512-6046
Butt Hinge

145126046
DE897: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-509-1721
Access Cover

145091721
ER3354: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-250-3484
Retaining Strap

142503484
5170928400: RNCC: 3 | RNVC: 2
709284: RNCC: 5 | RNVC: 1
709284: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-528-9459
Loop Clamp

145289459
EN4113F17WH: RNCC: 2 | RNVC: 2

27 Feb 2002

5340-14-040-2097
Support Hook

140402097
501-704-770-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-545-6924
Angle Bracket

145456924
RA1M703516113: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-472-8555
Bumper

144728555
512517: RNCC: 3 | RNVC: 2
1112988G00: RNCC: 5 | RNVC: 2
370002: RNCC: 5 | RNVC: 2

16 Nov 1994

5340-14-510-7633
Mounting Plate

145107633
6310004: RNCC: 3 | RNVC: 2
284704: RNCC: 5 | RNVC: 2

10 Nov 1998

5340-14-529-9148
Utility Access Door

145299148
RLSBXP240A: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-476-9331
Access Cover

144769331
92790: RNCC: 3 | RNVC: 2

12 Jul 1995

5340-14-553-9640
Access Cover

145539640
82099543000: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-14-462-2861
Mounting Plate

144622861
SMCFAGEC0200A: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-14-396-0675
Retaining Clip

143960675
69F1702: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-410-6498
Access Cover

144106498
401177: RNCC: 3 | RNVC: 2
BGE401177: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-484-5965
Threaded Rod End

144845965
8000134R00: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-460-3420
Mounting Bracket

144603420
T341AB46: RNCC: 3 | RNVC: 2
5046461: RNCC: 5 | RNVC: 9
T341AB46: RNCC: 5 | RNVC: 9

21 Jan 1993

5340-14-320-4697
Retaining Strap

143204697
481869: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-461-2677
Angle Bracket

144612677
4772820200: RNCC: 3 | RNVC: 2
5046073: RNCC: 5 | RNVC: 9

3 Mar 1993

5340-14-546-5734
Angle Bracket

145465734
MP1888F00: RNCC: 3 | RNVC: 2

20 Jul 2005

5340-14-451-7802
Blank Panel

144517802
600115: RNCC: 3 | RNVC: 2
F300 0T 012 1643: RNCC: 6 | RNVC: 9

4 Dec 1991

5340-14-263-3540
Synchro Clamp

142633540
R109380: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-376-4283
Loop Clamp

143764283
51123105042: RNCC: 3 | RNVC: 2
24GE42: RNCC: 5 | RNVC: 2
25GE42: RNCC: 5 | RNVC: 2

30 Mar 1982

5340-14-501-6596
Mounting Bracket

145016596
45283112: RNCC: 3 | RNVC: 2
45283112: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-485-4563
Rim Lock

144854563
6825611310: RNCC: 3 | RNVC: 2
IA4 4295: RNCC: 5 | RNVC: 2

23 Jan 1997

5340-14-411-7083
Angle Bracket

144117083
4771820260: RNCC: 3 | RNVC: 2

27 Aug 1986

5340-14-480-0483
Mounting Plate

144800483
10266783: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-434-6607
Pipe Hanger

144346607
10270-291: RNCC: 3 | RNVC: 9
89408338: RNCC: 5 | RNVC: 2

27 Sep 1989

5340-14-480-6295
Mounting Bracket

144806295
2022124: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-554-3228
Mounting Bracket

145543228
T257A5001110: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-546-2856
Bow Handle

145462856
Z3433: RNCC: 3 | RNVC: 2
SYQ5766: RNCC: 5 | RNVC: 2

22 Jun 2005

5340-14-249-7252
Angle Bracket

142497252
152184: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-442-4426
Angle Bracket

144424426
5000724060: RNCC: 3 | RNVC: 2

16 Oct 1990

5340-14-548-6186
Angle Bracket

145486186
RA1B702606241: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-439-9783
Mounting Plate

144399783
4161757: RNCC: 3 | RNVC: 2

29 Jun 1990

5340-14-265-4660
Pipe Hanger

142654660
124: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-506-2798
Lock Bolt

145062798
001765: RNCC: 3 | RNVC: 2
01765: RNCC: 5 | RNVC: 2
3245060017651: RNCC: 5 | RNVC: 2
5321343: RNCC: 5 | RNVC: 9
LG01765: RNCC: 5 | RNVC: 9

20 Apr 1998

5340-14-245-3384
Loop Clamp

142453384
79001267: RNCC: 3 | RNVC: 2
79001267: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-503-9824
Kick Door Plate

145039824
PLAQU93938C00: RNCC: 3 | RNVC: 2
PLAQU93938A00: RNCC: 5 | RNVC: 9
PLAQU93938X00: RNCC: 5 | RNVC: 9

4 Feb 1998

5340-14-457-7446
Mounting Bracket

144577446
71880: RNCC: 3 | RNVC: 2

17 Sep 1992

5340-14-550-4201
Angle Bracket

145504201
2714626270: RNCC: 3 | RNVC: 2

20 Jun 2006

5340-14-502-6185
Mounting Bracket

145026185
5516015483: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-538-6917
Lock Bolt

145386917
NGM0010065153407: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-503-8287
Loop Clamp

145038287
543409: RNCC: 3 | RNVC: 2

30 Jan 1998

5340-14-548-1065
Angle Bracket

145481065
RA1A702506037: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-551-2668
Support Hook

145512668
RA1M701340102A1: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-489-6059
Mounting Bracket

144896059
0177700490: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-538-0384
Door Holder

145380384
212250: RNCC: 3 | RNVC: 2

9 Dec 2003

5340-14-471-7839
Mounting Plate

144717839
P02207: RNCC: 3 | RNVC: 2

14 Sep 1994

5340-14-317-2583
Rim Lock

143172583
86170: RNCC: 3 | RNVC: 2
86170: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-462-0313
Mounting Bracket

144620313
A87290: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-363-7481
Loop Clamp

143637481
A11B602221030A2: RNCC: 3 | RNVC: 2

6 Jul 1980

5340-14-450-6440
Plate Spacer

144506440
0894273A00: RNCC: 3 | RNVC: 2

16 Oct 1991

5340-14-545-8119
Detent Plunger

145458119
077187: RNCC: 3 | RNVC: 2

17 May 2005

5340-14-555-5562
Angle Bracket

145555562
RA1M705136111A1N1: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-14-370-7105
Angle Bracket

143707105
216805: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-506-2955
Metal Grille

145062955
38511683: RNCC: 3 | RNVC: 2
38511683: RNCC: 5 | RNVC: 9

22 Apr 1998

5340-14-443-8752
Loop Clamp

144438752
51411905014: RNCC: 3 | RNVC: 2
28P14: RNCC: 5 | RNVC: 2

11 Dec 1990

5340-14-527-5087
Detent Plunger

145275087
212833-0: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-14-518-7570
Loop Clamp

145187570
EN4114F12NR0: RNCC: 2 | RNVC: 2

16 Feb 2000

5340-14-332-2436
Mending Plate

143322436
18107: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-514-1491
Mounting Plate

145141491
S94090: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-14-383-6293
Angle Bracket

143836293
4061601710: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-502-2145
Angle Bracket

145022145
0390731130: RNCC: 3 | RNVC: 2

26 Nov 1997

5340-14-324-9079
Retaining Strap

143249079
EDM0492: RNCC: 3 | RNVC: 2
96060229: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-423-9868
Mounting Bracket

144239868
721100536: RNCC: 3 | RNVC: 2
89174158: RNCC: 5 | RNVC: 2
721100536: RNCC: 5 | RNVC: 9

5 May 1988

Load More Results