What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 147 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 147 of 446

5340-14-353-6785
Loop Clamp

143536785
501-804-536-0: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-473-6961
Flush Catch Claw

144736961
332A58-4661-20: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-482-3010
Angle Bracket

144823010
21177-000-00: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-14-407-7264
Mending Plate

144077264
NO PRIMARY REF14-407-7264: RNCC: 3 | RNVC: 2
90-14-119: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-14-516-8789
Mounting Plate

145168789
611-257S-0588: RNCC: 3 | RNVC: 9

20 Oct 1999

5340-14-466-7389
Extension Handle

144667389
NO PRIMARY REF14-466-7389: RNCC: 3 | RNVC: 2
ACF1623024: RNCC: 5 | RNVC: 9

24 Nov 1993

5340-14-297-4200
Clamping Catch

142974200
70-27ACCADBICHR0MATERESS0RT: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-475-2124
Loop Clamp

144752124
CR30-45-650: RNCC: 3 | RNVC: 2

22 Mar 1995

5340-14-528-8689
Angle Bracket

145288689
GA024514Y00: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-14-520-3463
Mounting Plate

145203463
40147639: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-535-2557
Mounting Bracket

145352557
6501BRC130: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-384-6106
Bail Handle

143846106
LP51: RNCC: 3 | RNVC: 9
535734: RNCC: 5 | RNVC: 2
RASLP51: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-252-0060
Loop Clamp

142520060
72476: RNCC: 3 | RNVC: 2
P072476: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-533-9946
Mounting Bracket

145339946
710671: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-480-6539
Loop Clamp

144806539
92 10 22: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-540-5945
Angle Bracket

145405945
192322205: RNCC: 3 | RNVC: 9

7 Apr 2004

5340-14-555-3180
Mounting Bracket

145553180
82115759000: RNCC: 3 | RNVC: 2

24 Oct 2007

5340-14-513-0556
Mounting Bracket

145130556
009609035P: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-14-344-6762
Loop Clamp

143446762
00046000047: RNCC: 3 | RNVC: 2

9 Sep 1977

5340-14-384-3172
Loop Clamp

143843172
28GE18: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-374-5114
Bridge Clamp

143745114
16558248: RNCC: 3 | RNVC: 2
16558248: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-413-9622
Loop Clamp

144139622
ST400S60P142: RNCC: 3 | RNVC: 2
BJQS60P142: RNCC: 5 | RNVC: 2

22 Jan 1987

5340-14-513-7222
Mounting Plate

145137222
91712777: RNCC: 3 | RNVC: 2

7 Apr 1999

5340-14-520-0675
Retaining Strap

145200675
47134879: RNCC: 3 | RNVC: 2

10 May 2000

5340-14-483-4142
Mounting Bracket

144834142
TOL00861: RNCC: 3 | RNVC: 2

12 Sep 1996

5340-14-327-1307
Retaining Strap

143271307
4306349: RNCC: 3 | RNVC: 2
4306349: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-535-3114
Mounting Bracket

145353114
61225808AA: RNCC: 3 | RNVC: 2

20 May 2003

5340-14-543-6837
Strap Hinge

145436837
AMPC GENE E223423: RNCC: 3 | RNVC: 2

2 Dec 2004

5340-14-503-9934
Loop Clamp

145039934
COLLI00078: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-14-512-7939
Retaining Strap

145127939
109751: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-254-7767
Retaining Strap

142547767
52072: RNCC: 3 | RNVC: 9

1 Jan 1969

5340-14-446-4769
Swivel Caster

144464769
8811510038: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-14-502-5581
Bow Handle

145025581
5000822160: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-378-0077
Support Hook

143780077
16558495: RNCC: 3 | RNVC: 2
16558495: RNCC: 5 | RNVC: 9

20 Jul 1982

5340-14-292-2675
Retaining Strap

142922675
C479672: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-528-5346
Mounting Bracket

145285346
45709689: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-524-0419
Mounting Bracket

145240419
GFACA76: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-14-493-6482
Mounting Plate

144936482
J05085-02-0320P018: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-365-7534
Retaining Clip

143657534
7006-026: RNCC: 3 | RNVC: 2
91601115: RNCC: 5 | RNVC: 2
Y00000244: RNCC: 5 | RNVC: 2
Y00000244: RNCC: 5 | RNVC: 9

8 Oct 1980

5340-14-484-8192
Mounting Bracket

144848192
332P65-2122-2001: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-438-1512
Mounting Plate

144381512
330A25-2131-03: RNCC: 3 | RNVC: 2

7 Mar 1990

5340-14-290-2199
Loop Clamp

142902199
330A77-3059-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-544-3009
Mounting Plate

145443009
708010S917-10A: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-14-220-4128
Bumper

142204128
541081: RNCC: 3 | RNVC: 2
0945321003: RNCC: 5 | RNVC: 2
9734-00: RNCC: 5 | RNVC: 2
0945321003: RNCC: 5 | RNVC: 9
945321003: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-386-0526
Rim Lock Set

143860526
911BCAME911-181: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-486-2572
Retaining Strap

144862572
360A13-1032-20: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-540-5253
Detent Plunger

145405253
10553250: RNCC: 3 | RNVC: 2
E3-11-15: RNCC: 3 | RNVC: 2

1 Apr 2004

5340-14-226-1820
Retaining Strap

142261820
A10-73-110-01-0: RNCC: 3 | RNVC: 2
A10-73-110-01-0: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-380-8264
Swivel Caster

143808264
TP3BA100-23L: RNCC: 3 | RNVC: 2
TL3-100-33L: RNCC: 5 | RNVC: 2

14 Dec 1982

5340-14-318-3049
Mending Plate

143183049
26-720021-30: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-489-5569
Mounting Bracket

144895569
365A21-5047-0501: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-14-512-5478
Section Block Clamp

145125478
F704-81-02: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-304-6973
Block Fairlead

143046973
NO PRIMARY REF14-304-6973: RNCC: 3 | RNVC: 2
705191: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-428-5394
Rigid Caster

144285394
SF4BA125-40R: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-402-8978
Bumper

144028978
NO PRIMARY REF14-402-8978: RNCC: 3 | RNVC: 2
M4ZS670D1227A: RNCC: 5 | RNVC: 2

25 Jul 1985

5340-14-370-8922
Bumper

143708922
365A58-1237-20: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-283-5183
Loop Clamp

142835183
1590040: RNCC: 3 | RNVC: 2
17-600-40: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-360-6748
Snap Hook

143606748
22113-325-001: RNCC: 3 | RNVC: 2
AB23: RNCC: 5 | RNVC: 2

19 Dec 1979

5340-14-531-2089
Mounting Bracket

145312089
341A22-1000-67: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-472-0067
Lock-Release Lever

144720067
7400-48-98: RNCC: 3 | RNVC: 2
00888506: RNCC: 5 | RNVC: 2

29 Sep 1994

5340-14-477-7152
Mounting Plate

144777152
27-56505-447-00: RNCC: 3 | RNVC: 2
27-56505-447-00: RNCC: 5 | RNVC: 9

20 Sep 1995

5340-14-338-4485
Angle Bracket

143384485
321A60-9818-00: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-341-2774
Mounting Plate

143412774
NO PRIMARY REF14-341-2774: RNCC: 3 | RNVC: 2
33005-30: RNCC: 5 | RNVC: 2
33005-30: RNCC: 5 | RNVC: 9

16 Mar 1977

5340-14-506-9030
Retaining Clip

145069030
MX1572A00: RNCC: 3 | RNVC: 2
53746: RNCC: 3 | RNVC: 9

27 May 1998

5340-14-380-9709
Strap Hinge

143809709
5340CDPAUMELLEGRILLEL0NGLAME140G: RNCC: 2 | RNVC: 2

14 Dec 1982

5340-14-475-4795
Mounting Plate

144754795
10391041: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-14-437-6440
Cover Strip

144376440
PM1A192147001: RNCC: 3 | RNVC: 2
PM1A192147001: RNCC: 5 | RNVC: 2

7 Feb 1990

5340-14-477-0260
Lock Key

144770260
83800PPAGAN: RNCC: 3 | RNVC: 2

17 Jul 1995

5340-14-487-5540
Angle Bracket

144875540
78721DH29B: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-470-3206
Runner

144703206
PS4546: RNCC: 3 | RNVC: 2
PS4546: RNCC: 3 | RNVC: 2
91712130: RNCC: 5 | RNVC: 2

15 Jun 1994

5340-14-320-6574
Angle Bracket

143206574
0000648716: RNCC: 3 | RNVC: 2
648716: RNCC: 5 | RNVC: 9
0000648716: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-487-5324
Synchro Clamp

144875324
RA1M287111721: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-358-0083
Angle Bracket

143580083
19298262: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-14-040-9118
Mounting Plate

140409118
16129668: RNCC: 3 | RNVC: 2
16129668: RNCC: 5 | RNVC: 2
16129668: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-332-2396
Control Rod

143322396
16139084: RNCC: 3 | RNVC: 2
16139084: RNCC: 3 | RNVC: 9

2 Jul 1975

5340-14-474-2965
Angle Bracket

144742965
39022390: RNCC: 3 | RNVC: 2

8 Feb 1995

5340-14-543-7473
Mounting Plate

145437473
8808010: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-14-433-4478
Angle Bracket

144334478
5172361700: RNCC: 3 | RNVC: 2
723617: RNCC: 5 | RNVC: 9

26 Jul 1989

5340-14-518-4617
Mounting Bracket

145184617
T711A1001324: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-529-2776
Retaining Strap

145292776
1015300: RNCC: 3 | RNVC: 2

20 Mar 2002

5340-14-515-9152
Mounting Plate

145159152
BAGUE93687B00: RNCC: 3 | RNVC: 2

26 Aug 1999

5340-14-261-2843
Retaining Strap

142612843
175-74-76: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-456-1179
Loop Clamp

144561179
Y8211033: RNCC: 3 | RNVC: 2
RP16: RNCC: 5 | RNVC: 2
91607883: RNCC: 5 | RNVC: 2

18 Jun 1992

5340-14-384-0916
Angle Bracket

143840916
NO PRIMARY REF14-384-0916: RNCC: 3 | RNVC: 2
710552: RNCC: 5 | RNVC: 9

4 May 1983

5340-14-414-6852
Swivel Caster

144146852
HP1BD200-23R01: RNCC: 3 | RNVC: 2
85-693-2883: RNCC: 6 | RNVC: 9

25 Feb 1987

5340-14-412-4583
Access Cover

144124583
M539-104000: RNCC: 3 | RNVC: 2
79100881: RNCC: 3 | RNVC: 2
79100881: RNCC: 5 | RNVC: 9

15 Oct 1986

5340-14-509-8105
Access Cover

145098105
1600-100-216-04: RNCC: 3 | RNVC: 2
1560AA0012155: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-396-3340
Loop Clamp

143963340
278-1459: RNCC: 3 | RNVC: 2
1459: RNCC: 5 | RNVC: 2

27 Nov 1984

5340-14-342-0755
Locking Stay

143420755
EA1M240-79-01: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-541-6260
Utility Access Door

145416260
1091279-001: RNCC: 3 | RNVC: 2

15 Jun 2004

5340-14-456-8876
Webbing Strap

144568876
682-44-31-8M: RNCC: 3 | RNVC: 2
682-44-31-8M0-5M: RNCC: 5 | RNVC: 2

28 Jul 1992

5340-14-537-0525
Mounting Plate

145370525
11BTSW/NY/AAGMM1-PL6/10-20/22: RNCC: 3 | RNVC: 2
SYQ3694: RNCC: 5 | RNVC: 2

24 Sep 2003

5340-14-407-0330
Runner

144070330
NO PRIMARY REF14-407-0330: RNCC: 3 | RNVC: 2
D20-33497: RNCC: 5 | RNVC: 9

29 Jan 1986

5340-14-435-0267
Angle Bracket

144350267
70011804: RNCC: 3 | RNVC: 2
200349B: RNCC: 3 | RNVC: 2
200349B-ACIER: RNCC: 3 | RNVC: 2
200349B: RNCC: 5 | RNVC: 9
200349B-ACIER: RNCC: 5 | RNVC: 9
70011804: RNCC: 5 | RNVC: 9

11 Oct 1989

5340-14-040-5852
Bumper

140405852
RU961-4142M164A2: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-454-9309
Rod End Clevis

144549309
J05555-11-0600P017: RNCC: 3 | RNVC: 2

24 Apr 1992

5340-14-362-3764
Rod End Clevis

143623764
NO PRIMARY REF14-362-3764: RNCC: 3 | RNVC: 2
2510-20-008: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-043-1915
Bumper

140431915
1261-100S: RNCC: 3 | RNVC: 2
1261-1005: RNCC: 5 | RNVC: 2

10 Apr 1984

5340-14-316-5526
Bow Handle

143165526
321A95-0055-00: RNCC: 3 | RNVC: 2
321-95-0055-00: RNCC: 5 | RNVC: 2
08-431: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-311-7331
Detent Plunger

143117331
6890-0588: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-349-3332
Rod End Clevis

143493332
M208-21039: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-322-8293
Access Cover

143228293
A00840-03-2000P004: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-301-5412
Rim Lock Set

143015412
NO PRIMARY REF14-301-5412: RNCC: 3 | RNVC: 2
649-6DR0ITE: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-542-0075
Access Cover

145420075
20043-194: RNCC: 3 | RNVC: 2
502106015013A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-543-9137
Loop Clamp

145439137
ASNA0021-35P06: RNCC: 1 | RNVC: 2
ASNA0021-35P06: RNCC: 3 | RNVC: 2
ASNA0021-35P06: RNCC: 5 | RNVC: 2
A0021-35P06: RNCC: 5 | RNVC: 2

15 Dec 2004

5340-14-452-2942
Rod End Clevis

144522942
ST107M111-4P37B: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-526-9767
Access Cover

145269767
ST159-2M811-3R702: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-346-4799
Rod End Clevis

143464799
EA1M452-002: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-509-2352
Mounting Bracket

145092352
MECZ6161: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-407-0388
Runner

144070388
1010124: RNCC: 3 | RNVC: 2

29 Jan 1986

5340-14-518-4118
Mounting Bracket

145184118
3424452: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-14-545-1164
Mounting Bracket

145451164
086138N: RNCC: 3 | RNVC: 2

18 Mar 2005

5340-14-515-4045
Mounting Bracket

145154045
20512462A: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-470-0527
Loop Clamp

144700527
SM414PPRDPAS: RNCC: 3 | RNVC: 2
RI SM6 414 PP DP AS: RNCC: 5 | RNVC: 2

26 May 1994

5340-14-461-1151
Padlock

144611151
2001D: RNCC: 3 | RNVC: 2

24 Feb 1993

5340-14-429-1358
Handwheel

144291358
973677: RNCC: 3 | RNVC: 2
973677: RNCC: 5 | RNVC: 9

11 Jan 1989

5340-14-550-4849
Mounting Bracket

145504849
RA1A706216051: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-514-5122
Butt Hinge

145145122
4M11608B: RNCC: 3 | RNVC: 2

26 May 1999

5340-14-536-4196
Corner Brace

145364196
T537A2005177: RNCC: 3 | RNVC: 2

5 Aug 2003

5340-14-382-7133
Loop Clamp

143827133
0290250039: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-316-3117
Loop Clamp

143163117
1143177: RNCC: 3 | RNVC: 2
1143177: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-460-0780
Plate Spacer

144600780
PM1A725532518: RNCC: 3 | RNVC: 2
PM1A725532518: RNCC: 5 | RNVC: 2

7 Jan 1993

5340-14-423-5702
Butt Hinge

144235702
A11A232010062: RNCC: 3 | RNVC: 2

21 Apr 1988

5340-14-524-0676
Mounting Bracket

145240676
8025228L00: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-14-438-6018
Turnbuckle Body

144386018
TB3040304: RNCC: 3 | RNVC: 2

28 Mar 1990

5340-14-551-8907
Mounting Bracket

145518907
0025830: RNCC: 3 | RNVC: 2

7 Nov 2006

5340-14-458-0067
Bow Handle

144580067
986124: RNCC: 3 | RNVC: 2
986124: RNCC: 5 | RNVC: 9

2 Oct 1992

5340-14-534-6587
Pipe Hanger

145346587
0324 183: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-14-519-4676
Loop Clamp

145194676
11313109006: RNCC: 3 | RNVC: 2
432237: RNCC: 5 | RNVC: 9

22 Mar 2000

5340-14-360-2289
Loop Clamp

143602289
16296292: RNCC: 3 | RNVC: 2
16296292: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-282-4666
Webbing Strap

142824666
39629: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-543-2383
Mounting Bracket

145432383
10592309: RNCC: 3 | RNVC: 2

7 Oct 2004

5340-14-515-3353
Mounting Plate

145153353
3534411101: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-542-3461
Angle Bracket

145423461
10653379: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-14-537-9035
Mounting Bracket

145379035
10221830: RNCC: 3 | RNVC: 2

3 Dec 2003

5340-14-361-9485
Synchro Clamp

143619485
15134226: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-488-6774
Mounting Bracket

144886774
3BT02197AAAA: RNCC: 3 | RNVC: 2
3BT02197AAAA: RNCC: 5 | RNVC: 9

28 May 1997

5340-14-512-5082
Mounting Bracket

145125082
SUPPO00381X00: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-395-9729
Rim Lock

143959729
E131292001: RNCC: 3 | RNVC: 2
E131292001: RNCC: 5 | RNVC: 2

27 Nov 1984

5340-14-405-8476
Loop Clamp

144058476
99020736: RNCC: 3 | RNVC: 9

4 Dec 1985

5340-14-324-4320
Retaining Strap

143244320
56633: RNCC: 3 | RNVC: 9
388827: RNCC: 5 | RNVC: 2
388827: RNCC: 6 | RNVC: 9

1 Jan 1975

5340-14-437-9357
Angle Bracket

144379357
393108: RNCC: 3 | RNVC: 2

28 Feb 1990

5340-14-395-9703
Angle Bracket

143959703
210915: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-512-3058
Mounting Plate

145123058
3BT01475AAAA: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-14-550-9212
Angle Bracket

145509212
RA1B701964281N1: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-400-3693
Mortise Lock Set

144003693
5250DROITEFLASQUESINOX: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-478-2425
Mounting Bracket

144782425
BT13-1-9: RNCC: 3 | RNVC: 2

18 Oct 1995

5340-14-400-9467
Rod End Connector

144009467
A11A471030011A1: RNCC: 3 | RNVC: 2

21 May 1985

5340-14-452-0454
Mounting Plate

144520454
A60912-1: RNCC: 3 | RNVC: 2

18 Dec 1991

5340-14-479-5323
Dashpot

144795323
22314264-0: RNCC: 3 | RNVC: 2

17 Jan 1996

5340-14-457-8834
Pawl Fastener

144578834
02864615D1A: RNCC: 3 | RNVC: 2

24 Sep 1992

5340-14-439-8915
Mounting Bracket

144398915
22342643-9: RNCC: 3 | RNVC: 2

1 Jun 1990

5340-14-361-7544
Quick Release Pin

143617544
VDP0861: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-471-9666
Angle Bracket

144719666
64036-7: RNCC: 3 | RNVC: 2

28 Sep 1994

5340-14-463-6129
Mounting Plate

144636129
22327177-7: RNCC: 3 | RNVC: 2

21 Jun 1993

5340-14-515-0521
Runner

145150521
464709: RNCC: 3 | RNVC: 2
464709-001: RNCC: 5 | RNVC: 9

30 Jun 1999

5340-14-315-4774
Loop Clamp

143154774
620-847-604-0: RNCC: 3 | RNVC: 2
502-750-732-0: RNCC: 5 | RNVC: 2
620-847-604-0: RNCC: 5 | RNVC: 2
502-750-732-0: RNCC: 8 | RNVC: 2

1 Jan 1975

5340-14-341-6672
Bumper

143416672
NO PRIMARY REF14-341-6672: RNCC: 3 | RNVC: 2
D10-35758: RNCC: 5 | RNVC: 9

14 Apr 1977

5340-14-449-5306
Mounting Plate

144495306
41-38174: RNCC: 3 | RNVC: 2
41-38174: RNCC: 5 | RNVC: 9

21 Aug 1991

5340-14-422-7164
Bumper

144227164
664-44514-00-94: RNCC: 3 | RNVC: 2

17 Mar 1988

5340-14-222-6645
Access Cover

142226645
L921-24: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-552-1935
Swivel Caster

145521935
UP5BC125-23B: RNCC: 3 | RNVC: 2
91857017: RNCC: 5 | RNVC: 2

1 Dec 2006

5340-14-535-1853
Mounting Bracket

145351853
5000995300: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-446-4997
Bumper

144464997
81452282: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-14-475-0238
Mending Plate

144750238
093162G01TRA: RNCC: 3 | RNVC: 2
093162G: RNCC: 5 | RNVC: 2

16 Mar 1995

5340-14-500-7331
Loop Clamp

145007331
9001245100: RNCC: 3 | RNVC: 2
F300 0T 024 7527: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-489-5974
Mounting Bracket

144895974
036642: RNCC: 3 | RNVC: 2
3245060366421: RNCC: 5 | RNVC: 2
36642: RNCC: 5 | RNVC: 2
5226118: RNCC: 5 | RNVC: 9
LG36642: RNCC: 5 | RNVC: 9

6 Aug 1997

5340-14-447-2941
Mounting Bracket

144472941
5002172: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-472-3773
Pipe Hanger

144723773
PM1A522214301: RNCC: 3 | RNVC: 2
PM1A522214301: RNCC: 5 | RNVC: 2

19 Oct 1994

5340-14-522-2353
Clamp Bolt Assembly

145222353
1MP50045112: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-14-530-6889
Cover Strip

145306889
T524A2001523: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-465-7683
Loop Clamp

144657683
51311905028: RNCC: 3 | RNVC: 2
21P28: RNCC: 5 | RNVC: 2
Z00.N7141380037: RNCC: 5 | RNVC: 2
211902800: RNCC: 5 | RNVC: 2

14 Oct 1993

5340-14-535-0616
Elastic Strap

145350616
3SA302VA: RNCC: 3 | RNVC: 2
CAE01198: RNCC: 5 | RNVC: 2

30 Apr 2003

5340-14-316-2696
Angle Bracket

143162696
0257858500: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-535-5047
Cover Strip

145355047
10-250-823: RNCC: 3 | RNVC: 2
SZ10.250.823: RNCC: 3 | RNVC: 2

31 May 2003

5340-14-447-1876
Loop Clamp

144471876
NGS1A3114: RNCC: 3 | RNVC: 2

3 May 1991

5340-14-427-5262
Loop Clamp

144275262
035196: RNCC: 3 | RNVC: 2

20 Oct 1988

5340-14-305-2783
Angle Bracket

143052783
26244372: RNCC: 3 | RNVC: 2
C244372: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-335-2828
Butt Hinge

143352828
16397420: RNCC: 3 | RNVC: 2
16397420: RNCC: 3 | RNVC: 9

30 Jun 1976

5340-14-441-9199
Loop Clamp

144419199
E05400321: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-308-3567
Retaining Strap

143083567
6804: RNCC: 3 | RNVC: 9
M208N1022: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-397-4193
Angle Bracket

143974193
205392: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-042-2187
Door Closer

140422187
16177408: RNCC: 3 | RNVC: 2
16177408: RNCC: 5 | RNVC: 2
16177408: RNCC: 5 | RNVC: 9

14 Feb 1977

5340-14-513-8553
Mounting Plate

145138553
639748: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-424-0867
Mending Plate

144240867
969877P03: RNCC: 3 | RNVC: 2
969877P03: RNCC: 5 | RNVC: 9

11 May 1988

5340-14-031-6931
Angle Bracket

140316931
A11A221274002: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-549-0850
Angle Bracket

145490850
RA1M705345111A2N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-394-9471
Angle Bracket

143949471
20320440: RNCC: 3 | RNVC: 2
20320440: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-479-6771
Loop Holder

144796771
11095D310101: RNCC: 3 | RNVC: 2

31 Jan 1996

5340-14-500-8224
Section Block Clamp

145008224
E64009998044: RNCC: 3 | RNVC: 2
F300 0T 024 8426: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-542-2601
Mounting Bracket

145422601
921066308: RNCC: 3 | RNVC: 2
921066308: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-518-1747
Mounting Plate

145181747
5010138075: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-481-3772
Mounting Plate

144813772
262713: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-388-3362
Bow Handle

143883362
ZC9810130U: RNCC: 3 | RNVC: 2
ZC9810130: RNCC: 5 | RNVC: 9

3 Nov 1983

5340-14-382-4193
Webbing Strap

143824193
234949: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-247-3380
Mounting Bracket

142473380
321A57-0436-20: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-314-1110
Bumper

143141110
NO PRIMARY REF14-314-1110: RNCC: 3 | RNVC: 2
501328: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-275-1781
Clamping Catch

142751781
70-14ACIERDECAPE: RNCC: 3 | RNVC: 2
560945: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-279-1484
Strap End Clip

142791484
12203-163-030: RNCC: 3 | RNVC: 2
ARE202956: RNCC: 5 | RNVC: 2
BAZ1686: RNCC: 5 | RNVC: 2
E1205: RNCC: 5 | RNVC: 2
202956: RNCC: 5 | RNVC: 2
2275-30: RNCC: 5 | RNVC: 9
3145: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-350-5094
Retaining Strap

143505094
08-25-20-10: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-493-5354
Loop Clamp

144935354
NO PRIMARY REF14-493-5354: RNCC: 3 | RNVC: 2
110685: RNCC: 5 | RNVC: 9
F300 0T 013 4569: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-553-6168
Mounting Bracket

145536168
355R69-1002-00: RNCC: 3 | RNVC: 2

24 Apr 2007

5340-14-372-7389
Utility Access Door

143727389
365A25-0014-0305: RNCC: 3 | RNVC: 2

14 Mar 1996

5340-14-546-3806
Mounting Bracket

145463806
268E290-00: RNCC: 3 | RNVC: 2

28 Jun 2005

5340-14-541-9710
Mounting Plate

145419710
20015-836: RNCC: 3 | RNVC: 2
502118X04039A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-378-9184
Anchor Strap

143789184
NO PRIMARY REF14-378-9184: RNCC: 3 | RNVC: 2
404304696: RNCC: 5 | RNVC: 9
404304696: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-14-485-0438
Swivel Caster

144850438
SP5BA200-23R: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-14-323-6684
Loop Clamp

143236684
7007-570: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-420-3678
Bumper

144203678
A10-74-947-09-0M1: RNCC: 3 | RNVC: 2
A10-74-947-09-0M1: RNCC: 5 | RNVC: 2
85-801-2446: RNCC: 6 | RNVC: 9

7 Dec 1987

5340-14-344-4415
Retaining Strap

143444415
EA1M702-31-922: RNCC: 3 | RNVC: 2

10 Aug 1977

5340-14-533-1808
Mounting Bracket

145331808
T20-1210: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-14-406-3027
Rod End Clevis

144063027
160-46827-01H: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-361-2557
Mending Plate

143612557
M50281-33: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-379-0724
Access Cover

143790724
9805J32-2000-00: RNCC: 3 | RNVC: 2
9805360A32-2000-00: RNCC: 5 | RNVC: 2

6 Sep 1982

5340-14-374-6461
Access Cover

143746461
M421-300109: RNCC: 3 | RNVC: 2

30 Jan 1982

5340-14-503-9060
Lock-Release Lever

145039060
487-00044: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-14-434-1907
Mounting Bracket

144341907
551488: RNCC: 3 | RNVC: 2

12 Sep 1989

5340-14-450-8172
Mounting Bracket

144508172
A37914L: RNCC: 3 | RNVC: 2

23 Oct 1991

5340-14-524-5273
Retaining Strap

145245273
0CV194121001: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-459-8783
Detent Plunger

144598783
P721154A: RNCC: 3 | RNVC: 2

17 Dec 1992

5340-14-238-9624
Expansion Plug

142389624
100020: RNCC: 3 | RNVC: 9
062100020: RNCC: 5 | RNVC: 9
55557: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-554-2759
Mounting Bracket

145542759
CLACA41: RNCC: 3 | RNVC: 2
06 722: RNCC: 5 | RNVC: 2
CLACA35: RNCC: 5 | RNVC: 9

18 Jun 2007

5340-14-533-7986
Mounting Bracket

145337986
F1262057: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-525-6045
Loop Clamp

145256045
10 146 604 1020: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-504-9475
Synchro Clamp

145049475
9401713559: RNCC: 3 | RNVC: 2
1713 55: RNCC: 5 | RNVC: 2
L41540188: RNCC: 5 | RNVC: 2

11 Mar 1998

5340-14-266-1511
Bumper

142661511
C244329: RNCC: 3 | RNVC: 2
CSFC244329: RNCC: 5 | RNVC: 2
26244329: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-457-1853
Access Cover

144571853
39467506: RNCC: 3 | RNVC: 2
39467506: RNCC: 5 | RNVC: 9

13 Aug 1992

5340-14-294-1439
Mounting Bracket

142941439
PF218614: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-548-6191
Pipe Hanger

145486191
RA1B702506173: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-506-7019
Pipe Hanger

145067019
PM1A606122088: RNCC: 3 | RNVC: 2
PM1A606122088: RNCC: 5 | RNVC: 2

11 May 1998

5340-14-294-3529
Angle Bracket

142943529
0235257080: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-314-3633
Retaining Band

143143633
5000001600: RNCC: 3 | RNVC: 2
5000001600: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-442-1109
Anchor Strap

144421109
005062010199: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-14-388-5538
Access Cover

143885538
79088659: RNCC: 3 | RNVC: 2
79088659: RNCC: 5 | RNVC: 9

3 Nov 1983

5340-14-505-2059
Retaining Strap

145052059
240531295: RNCC: 3 | RNVC: 9

13 Mar 1998

5340-14-448-0884
Anchor Strap

144480884
PM1A239129017: RNCC: 3 | RNVC: 2
PM1A239129017: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-368-4072
Pipe Hanger

143684072
0264767050: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-14-311-3766
Anchor Strap

143113766
VTTRATACB124: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-230-5328
Access Cover

142305328
0018620060: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-435-2408
Anchor Strap

144352408
1312-75: RNCC: 3 | RNVC: 2
9123398180: RNCC: 5 | RNVC: 2

31 Oct 1989

5340-14-206-6618
Access Cover

142066618
0000128481: RNCC: 3 | RNVC: 2
128481: RNCC: 5 | RNVC: 9
0000128481: RNCC: 5 | RNVC: 9
128481: RNCC: 6 | RNVC: 9

1 Jan 1964

5340-14-326-9404
Access Cover

143269404
196919: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-349-9539
Access Cover

143499539
22347625: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-535-3819
Runner

145353819
5010225559: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-504-7428
Access Cover

145047428
7519708: RNCC: 3 | RNVC: 2
5001821946: RNCC: 3 | RNVC: 2

3 Mar 1998

5340-14-383-3203
Access Cover

143833203
BAZ92135: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-522-1148
Access Cover

145221148
8194888: RNCC: 3 | RNVC: 2
8194888: RNCC: 5 | RNVC: 2

4 Oct 2000

5340-14-473-2035
Access Cover

144732035
N113476A: RNCC: 3 | RNVC: 2
89473637: RNCC: 5 | RNVC: 2

7 Dec 1994

5340-14-348-5393
Rod End Clevis

143485393
C47902: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-522-3449
Access Cover

145223449
GA10591: RNCC: 3 | RNVC: 2

23 Oct 2000

5340-14-552-0268
Mounting Plate

145520268
0249450550: RNCC: 3 | RNVC: 2

21 Nov 2006

5340-14-417-0398
Loop Clamp

144170398
M4HW4101317001: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-14-350-4598
Access Cover

143504598
209976: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-537-1204
Access Cover

145371204
1004555: RNCC: 3 | RNVC: 2

1 Oct 2003

5340-14-540-3111
Access Cover

145403111
10670682000: RNCC: 3 | RNVC: 2

18 Mar 2004

5340-14-273-9148
Plug Button

142739148
MPL208: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-554-7704
Access Cover

145547704
260492236: RNCC: 3 | RNVC: 2

20 Aug 2007

5340-14-547-5364
Angle Bracket

145475364
RA1M704566831N1: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-555-1422
Strap Hinge

145551422
000933: RNCC: 3 | RNVC: 2

4 Oct 2007

5340-14-531-6950
Mounting Bracket

145316950
10456367: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-14-541-3430
Mounting Bracket

145413430
61470591AA: RNCC: 3 | RNVC: 2

27 May 2004

5340-14-539-7667
Mounting Bracket

145397667
371250H: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-14-389-9994
Expansion Plug

143899994
0000504153: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-508-8724
Webbing Strap

145088724
EL56-4: RNCC: 3 | RNVC: 2

2 Oct 1998

5340-14-446-0030
Angle Bracket

144460030
23116377-6: RNCC: 3 | RNVC: 2

4 Mar 1991

5340-14-480-2143
Pawl Fastener

144802143
23.44493BA: RNCC: 3 | RNVC: 2

28 Feb 1996

5340-14-318-6480
Access Cover

143186480
200-3: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-433-8748
Clamp Bolt Assembly

144338748
RP980917/2: RNCC: 3 | RNVC: 2

21 Aug 1989

5340-14-468-2290
Anchor Strap

144682290
201987-1: RNCC: 3 | RNVC: 2

15 Feb 1994

5340-14-550-4519
Loop Clamp

145504519
01870002000: RNCC: 3 | RNVC: 2
AA009563: RNCC: 6 | RNVC: 9

21 Jun 2006

5340-14-266-0863
Mending Plate

142660863
10365A: RNCC: 3 | RNVC: 2
40606-6: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-541-6179
Utility Resilient Mount

145416179
6.1919.1: RNCC: 3 | RNVC: 2
4848ZG8703480009: RNCC: 6 | RNVC: 9

14 Jun 2004

5340-14-553-9557
Blank Panel

145539557
82099167000: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-14-249-8158
Access Cover

142498158
HE60F35-1: RNCC: 3 | RNVC: 2
HE60F35-1: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-333-8146
Rigid Caster

143338146
0975730: RNCC: 3 | RNVC: 2

23 Apr 1976

5340-14-226-4671
Loop Clamp

142264671
FA257: RNCC: 3 | RNVC: 9
TID2965: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-499-5338
Protection Bellows

144995338
45656448: RNCC: 3 | RNVC: 2
4-565644-8: RNCC: 5 | RNVC: 2
F300 0T 023 2246: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-455-8972
Access Cover

144558972
79113571-1: RNCC: 3 | RNVC: 2
79113571-1: RNCC: 5 | RNVC: 9

11 Jun 1992

5340-14-395-5730
Clamp Bolt Assembly

143955730
5-1881B43152-333: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-539-8406
Detent Plunger

145398406
38-46-H: RNCC: 3 | RNVC: 2
SYQ4807: RNCC: 5 | RNVC: 2

11 Feb 2004

5340-14-460-0449
Access Door Hinge

144600449
14-7-3332: RNCC: 3 | RNVC: 2
91628539: RNCC: 5 | RNVC: 2

7 Jan 1993

5340-14-355-6771
Control Rod

143556771
9-3-704: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-431-4123
Mounting Bracket

144314123
X352656: RNCC: 3 | RNVC: 2

18 Apr 1989

5340-14-472-4548
Mounting Bracket

144724548
DXX1117: RNCC: 3 | RNVC: 2

26 Oct 1994

5340-14-472-3228
Shelf Bracket

144723228
DHV1250: RNCC: 3 | RNVC: 2

19 Oct 1994

5340-14-378-9364
Bail Handle

143789364
218996: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-399-2744
Mending Plate

143992744
0268420600: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-372-1140
Retaining Strap

143721140
BS670: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-411-0423
Rod End Clevis

144110423
T200: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-552-0414
Angle Bracket

145520414
0249871290: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-14-555-0000
Mounting Bracket

145550000
S257A7011151: RNCC: 3 | RNVC: 2

17 Sep 2007

5340-14-378-6675
Loop Clamp

143786675
51424405007: RNCC: 3 | RNVC: 2
28JE7: RNCC: 5 | RNVC: 2

11 Aug 1982

5340-14-459-1568
Mounting Plate

144591568
16787460: RNCC: 3 | RNVC: 2

19 Nov 1992

5340-14-439-2527
Tubular Fairlead

144392527
3101375: RNCC: 3 | RNVC: 2
3101375: RNCC: 5 | RNVC: 2

25 Apr 1990

5340-14-497-2880
Access Cover

144972880
1503441A01: RNCC: 3 | RNVC: 2
F300 0T 022 9495: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-370-1298
Loop Clamp

143701298
70277300: RNCC: 3 | RNVC: 2
70277300: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-536-5867
Access Cover

145365867
56295188: RNCC: 3 | RNVC: 2

2 Sep 2003

5340-14-517-6380
Support Hook

145176380
CRM280110532: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-482-4314
Mounting Plate

144824314
RA1M114101440: RNCC: 3 | RNVC: 2

11 Jul 1996

5340-14-473-7343
Corner Brace

144737343
ALZ126055151021: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-361-8254
Rigid Caster

143618254
S780: RNCC: 3 | RNVC: 9

20 Feb 1980

5340-14-202-2115
Threaded Rod End

142022115
STE14: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-461-2392
Mounting Plate

144612392
160R742644: RNCC: 3 | RNVC: 2

3 Mar 1993

5340-14-343-6655
Angle Bracket

143436655
16411803: RNCC: 3 | RNVC: 2
16411803: RNCC: 3 | RNVC: 9

13 Jul 1977

5340-14-550-3442
Mounting Bracket

145503442
2716412990: RNCC: 3 | RNVC: 2

16 Jun 2006

5340-14-497-4830
Mounting Plate

144974830
E15282: RNCC: 3 | RNVC: 2
E15282: RNCC: 5 | RNVC: 9
F300 0T 023 2485: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-549-8513
Mounting Bracket

145498513
2092282: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-554-4881
Masking Plate

145544881
SE10418: RNCC: 3 | RNVC: 2

13 Jul 2007

5340-14-551-5482
Angle Bracket

145515482
712564: RNCC: 3 | RNVC: 2

29 Sep 2006

5340-14-535-3899
Mounting Bracket

145353899
5010304896: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-376-7649
Detent Plunger

143767649
1081190012: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-543-1995
Mounting Bracket

145431995
309 50: RNCC: 3 | RNVC: 2
30950: RNCC: 5 | RNVC: 2
AA001591: RNCC: 6 | RNVC: 9

31 Aug 2004

5340-14-459-7312
Cover Strip

144597312
LN321022REP16JAG3: RNCC: 3 | RNVC: 2
RAB0178: RNCC: 5 | RNVC: 2

15 Dec 1992

5340-14-495-3051
Mounting Bracket

144953051
TB2010101F320: RNCC: 3 | RNVC: 2
F300 0T 018 9946: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-357-1457
Angle Bracket

143571457
A11A231472020A2: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-341-7940
Compression Cup

143417940
76591: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-535-3685
Loop Clamp

145353685
5001844751: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-457-5962
Retaining Bail

144575962
PM1A795402240: RNCC: 3 | RNVC: 2
PM1A795402240: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-552-0424
Angle Bracket

145520424
0249927030: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-14-507-6978
Bumper

145076978
TEB278010007: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-522-8903
Bumper

145228903
96191281: RNCC: 3 | RNVC: 2
8015963T00: RNCC: 5 | RNVC: 2
96191281: RNCC: 5 | RNVC: 9

6 Dec 2000

5340-14-484-6671
Mounting Plate

144846671
29444217: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-514-5342
Loop Clamp

145145342
11299: RNCC: 3 | RNVC: 2

26 May 1999

5340-14-514-7605
Expansion Plug

145147605
E29584A12AGCN: RNCC: 2 | RNVC: 2

16 Jun 1999

5340-14-515-5184
Angle Bracket

145155184
9401948: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-535-5436
Mounting Bracket

145355436
M29982: RNCC: 3 | RNVC: 2

3 Jun 2003

5340-14-320-2782
Retaining Clip

143202782
70584: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-224-4655
Retaining Strap

142244655
A67339: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-532-3601
Detent Plunger

145323601
RA1M216811813: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-507-9821
Lock Bolt

145079821
4773102190: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-202-3880
Retaining Strap

142023880
0000121859: RNCC: 3 | RNVC: 2
121859: RNCC: 5 | RNVC: 9
0000121859: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-14-514-0376
Mounting Bracket

145140376
PM1A655132511: RNCC: 3 | RNVC: 2
PM1A655132511: RNCC: 5 | RNVC: 2

22 Apr 1999

5340-14-366-4954
Mending Plate

143664954
533420: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-315-9971
Pipe Hanger

143159971
0260167290: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-498-2363
Bow Handle

144982363
91936357: RNCC: 3 | RNVC: 2
00246671000: RNCC: 5 | RNVC: 2
F300 0T 004 6318: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-394-9026
Webbing Strap

143949026
AF500: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-397-6026
Loop Clamp

143976026
353426BLANC: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-503-5403
Mounting Bracket

145035403
10235463000: RNCC: 3 | RNVC: 2
10235463: RNCC: 5 | RNVC: 2

20 Jan 1998

5340-14-442-1180
Flush Catch

144421180
518P455: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-14-426-2325
Angle Bracket

144262325
23124253-5: RNCC: 3 | RNVC: 2

9 Aug 1988

5340-14-348-5828
Runner

143485828
N745051343: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-14-545-6058
Mounting Bracket

145456058
10614753: RNCC: 3 | RNVC: 2

25 Apr 2005

5340-14-455-9597
Shelf Bracket

144559597
PM1A796011010: RNCC: 3 | RNVC: 2
PM1A796011010: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-334-4431
Retaining Strap

143344431
091806: RNCC: 3 | RNVC: 2
091806P: RNCC: 5 | RNVC: 2

1 Jun 1976

5340-14-406-2032
Clamping Catch

144062032
BAZ2559: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-485-6132
Brake Valve Bracket

144856132
M4ZS460D8656: RNCC: 3 | RNVC: 2

6 Feb 1997

5340-14-370-0106
Retaining Strap

143700106
177766: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-516-8587
Mounting Plate

145168587
101163951020: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-14-513-4602
Angle Bracket

145134602
0264703020: RNCC: 3 | RNVC: 2
AX16199: RNCC: 5 | RNVC: 2

17 Mar 1999

5340-14-474-9018
Angle Bracket

144749018
0552207250: RNCC: 3 | RNVC: 2

8 Mar 1995

5340-14-545-6141
Pipe Hanger

145456141
160-65116: RNCC: 3 | RNVC: 2

26 Apr 2005

5340-14-485-9966
Angle Bracket

144859966
PA01PD030113: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-475-1677
Mounting Bracket

144751677
20857353: RNCC: 3 | RNVC: 2
20857353: RNCC: 3 | RNVC: 9

22 Mar 1995

5340-14-450-2842
Retaining Clip

144502842
PM1A249546006: RNCC: 3 | RNVC: 2
PM1A249546006: RNCC: 5 | RNVC: 2

25 Sep 1991

5340-14-517-7458
Mounting Bracket

145177458
TA5044G301: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-537-7379
Webbing Strap

145377379
PCP220C: RNCC: 3 | RNVC: 2

19 Nov 2003

5340-14-517-7647
Retaining Strap

145177647
419791: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-14-521-9591
Mounting Plate

145219591
TPS1A1006A: RNCC: 3 | RNVC: 2

27 Sep 2000

5340-14-374-6057
Retaining Band

143746057
5000010704: RNCC: 3 | RNVC: 2
5000010704: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-448-3674
Clamping Catch

144483674
20865285: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-14-529-2066
Mounting Bracket

145292066
A104023T: RNCC: 3 | RNVC: 2

18 Mar 2002

5340-14-462-8098
Bow Handle

144628098
29454082: RNCC: 3 | RNVC: 2

3 May 1993

5340-14-514-1351
Mounting Bracket

145141351
G101500RTF: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-14-522-5945
Mounting Plate

145225945
2646E073: RNCC: 3 | RNVC: 2

8 Nov 2000

5340-14-528-9899
Mounting Bracket

145289899
706521: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-14-031-8841
Angle Bracket

140318841
573905337: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-518-6295
Mounting Bracket

145186295
5010268029: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-554-3329
Mounting Bracket

145543329
82151186000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-337-6614
Bumper

143376614
0607385600: RNCC: 3 | RNVC: 2
0607385600: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-14-552-9588
Angle Bracket

145529588
712123: RNCC: 3 | RNVC: 2

19 Feb 2007

5340-14-547-5501
Angle Bracket

145475501
RA1M706515351N1: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-293-7788
Turnbuckle Body

142937788
2-143421-6: RNCC: 3 | RNVC: 2
143421B: RNCC: 5 | RNVC: 9
2-143421-6: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-485-0659
Mounting Bracket

144850659
332A32-3280-20: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-14-381-3184
Angle Bracket

143813184
2206-511A504: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-330-3322
Angle Bracket

143303322
564026002: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-457-6237
Plug Button

144576237
PM1A753219100: RNCC: 3 | RNVC: 2
PM1A753219100: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-534-8061
Access Cover

145348061
5812952E00: RNCC: 3 | RNVC: 2

8 Apr 2003

5340-14-364-5746
Rim Lock

143645746
22545E2: RNCC: 3 | RNVC: 2
5451523: RNCC: 5 | RNVC: 2
5451523K: RNCC: 5 | RNVC: 2

2 Sep 1980

5340-14-438-6014
Expansion Plug

144386014
8104070034: RNCC: 3 | RNVC: 2
8104070034: RNCC: 5 | RNVC: 2
5000816045: RNCC: 5 | RNVC: 2

28 Mar 1990

5340-14-521-2966
Mounting Bracket

145212966
10498531: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-525-8608
Utility Access Door

145258608
39072969: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-234-7955
Angle Bracket

142347955
712156: RNCC: 3 | RNVC: 9
157005: RNCC: 5 | RNVC: 9
062712156: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-325-1094
Retaining Strap

143251094
23035372: RNCC: 3 | RNVC: 2
23035372-7: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-486-2481
Mounting Plate

144862481
282-1-C-110: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-297-3121
Retaining Strap

142973121
501-705-005-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-465-1833
Pad Eye

144651833
365P69-1112-04: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-409-3613
Access Cover

144093613
NO PRIMARY REF14-409-3613: RNCC: 3 | RNVC: 2
612881: RNCC: 5 | RNVC: 2
594513114: RNCC: 5 | RNVC: 9
612881: RNCC: 5 | RNVC: 9

28 May 1986

5340-14-404-0185
Bumper

144040185
NO PRIMARY REF14-404-0185: RNCC: 3 | RNVC: 2
735725: RNCC: 5 | RNVC: 9

11 Sep 1985

5340-14-524-8469
Mounting Bracket

145248469
IF-246-500: RNCC: 3 | RNVC: 2
IF246-500: RNCC: 5 | RNVC: 9

23 Apr 2001

5340-14-432-9263
Plug Button

144329263
0608037300: RNCC: 3 | RNVC: 2
85-692-9368: RNCC: 6 | RNVC: 9
85-694-0531: RNCC: 6 | RNVC: 9

4 Jul 1989

5340-14-502-9929
Cover Strip

145029929
330A22-2417-21: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-471-6768
Access Cover

144716768
0910-105-100A: RNCC: 3 | RNVC: 2

7 Sep 1994

5340-14-568-8195
Utility Resilient Mount

145688195
HH11-40CM2: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-14-429-0309
Mounting Plate

144290309
0301521110: RNCC: 3 | RNVC: 2
706A33-299-001: RNCC: 5 | RNVC: 2

4 Jan 1989

5340-14-367-8006
Retaining Strap

143678006
F702-097: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-258-0154
Bow Handle

142580154
4H002400-00: RNCC: 3 | RNVC: 2
4H002400-00: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-446-4059
Bail Handle

144464059
4225-421B549: RNCC: 3 | RNVC: 2
4225-421B549: RNCC: 5 | RNVC: 2

19 Mar 1991

5340-14-526-4030
Mounting Plate

145264030
332A088323-27: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-510-3287
Mounting Bracket

145103287
NO PRIMARY REF14-510-3287: RNCC: 3 | RNVC: 2
16292: RNCC: 5 | RNVC: 9
1560AA8020475: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-549-0945
Angle Bracket

145490945
RA1M704416110: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-545-5176
Mounting Bracket

145455176
95101Z01PYN00801: RNCC: 3 | RNVC: 2

18 Apr 2005

5340-14-524-3588
Mounting Bracket

145243588
SD001PD070106: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-530-6914
Mounting Bracket

145306914
T533A1002106: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-521-2963
Mounting Bracket

145212963
10497945: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-425-6062
Angle Bracket

144256062
413102000007: RNCC: 3 | RNVC: 2

12 Jul 1988

5340-14-545-6933
Angle Bracket

145456933
RA1M703556131N1: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-549-8921
Angle Bracket

145498921
31106520: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-533-0187
Angle Bracket

145330187
F1260733: RNCC: 3 | RNVC: 2

17 Jan 2003

5340-14-382-6268
Angle Bracket

143826268
16497582: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-424-2951
Mounting Plate

144242951
P713233: RNCC: 3 | RNVC: 2
89414968: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-460-9831
Mounting Plate

144609831
SHS1B0211A: RNCC: 3 | RNVC: 2

17 Feb 1993

5340-14-483-8392
Mounting Plate

144838392
100A107463: RNCC: 3 | RNVC: 2

3 Oct 1996

5340-14-428-4356
Loop Clamp

144284356
51123105033: RNCC: 3 | RNVC: 2
24GE33: RNCC: 5 | RNVC: 2
25GE33: RNCC: 5 | RNVC: 2

8 Dec 1988

5340-14-434-9135
Mounting Plate

144349135
53MA401379: RNCC: 3 | RNVC: 2

9 Oct 1989

5340-14-397-8476
Buckle

143978476
45: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-483-6989
Webbing Strap

144836989
H125197: RNCC: 3 | RNVC: 2
F300 0T 016 9081: RNCC: 6 | RNVC: 9

27 Sep 1996

5340-14-493-1599
Retaining Strap

144931599
83311905011: RNCC: 3 | RNVC: 2
171P3X11: RNCC: 3 | RNVC: 2
F300 0T 010 8211: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-402-7489
Strap End Clip

144027489
56-601B: RNCC: 3 | RNVC: 2
219195: RNCC: 5 | RNVC: 2

19 Jul 1985

5340-14-456-4441
Webbing Strap

144564441
5000491323: RNCC: 3 | RNVC: 2

2 Jul 1992

5340-14-338-6909
Leaf Spring

143386909
0038724678: RNCC: 3 | RNVC: 2
0038724678: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-485-4572
Angle Bracket

144854572
T2109AA18: RNCC: 3 | RNVC: 2
T2109AA18: RNCC: 5 | RNVC: 9

23 Jan 1997

5340-14-431-5298
Loop Clamp

144315298
4CA3637321: RNCC: 3 | RNVC: 2
85-693-7927: RNCC: 6 | RNVC: 9

24 Apr 1989

5340-14-482-5545
Mounting Plate

144825545
3BM01166AAAA: RNCC: 3 | RNVC: 2
3BM01166AAAA: RNCC: 5 | RNVC: 9

11 Jul 1996

5340-14-546-7648
Angle Bracket

145467648
RA1M705236503: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-14-263-4448
Retaining Strap

142634448
M105469: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-511-5053
Mounting Plate

145115053
FH152004010: RNCC: 3 | RNVC: 2
FH152004000: RNCC: 3 | RNVC: 9
101A100282: RNCC: 5 | RNVC: 2

16 Dec 1998

5340-14-411-2399
Pipe Hanger

144112399
0301030720: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-521-1560
Mounting Bracket

145211560
F1263806: RNCC: 3 | RNVC: 2
F1263806: RNCC: 5 | RNVC: 2

12 Jul 2000

5340-14-514-2370
Mounting Bracket

145142370
2022: RNCC: 3 | RNVC: 2

3 May 1999

5340-14-246-3762
Loop Clamp

142463762
M112773: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-537-4601
Mounting Bracket

145374601
10662519: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-545-7875
Mounting Bracket

145457875
710362: RNCC: 3 | RNVC: 2

13 May 2005

5340-14-520-8889
Angle Bracket

145208889
EQUER01635A00: RNCC: 3 | RNVC: 2

21 Jun 2000

5340-14-550-4678
Angle Bracket

145504678
RA1B701454111N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-550-0277
Mounting Bracket

145500277
56098162: RNCC: 3 | RNVC: 2

29 May 2006

5340-14-213-0933
Bumper

142130933
LXA57NECBM5: RNCC: 3 | RNVC: 9
389482: RNCC: 5 | RNVC: 2
590078: RNCC: 5 | RNVC: 2
202305: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-550-2719
Mounting Bracket

145502719
BAZ2472: RNCC: 3 | RNVC: 2

14 Jun 2006

5340-14-392-5019
Swivel Caster

143925019
20100EDIX: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-400-0736
Butt Hinge

144000736
213559: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-549-9559
Mounting Plate

145499559
MH1376F00DA: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-031-0823
Retaining Band

140310823
501: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-527-7536
Mounting Bracket

145277536
710336: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-14-471-2688
Mounting Bracket

144712688
7524875: RNCC: 3 | RNVC: 2
0C07524875: RNCC: 5 | RNVC: 2
5001014496: RNCC: 5 | RNVC: 2

10 Aug 1994

5340-14-532-1982
Mounting Bracket

145321982
19220327: RNCC: 3 | RNVC: 2

16 Oct 2002

5340-14-542-5392
Mounting Bracket

145425392
02120014: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-14-499-9476
Mounting Bracket

144999476
577600: RNCC: 3 | RNVC: 2
F300 0T 023 9425: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-493-6840
Mounting Plate

144936840
443 798 IND.4: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-435-1628
Mounting Bracket

144351628
2-50002: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-14-486-5108
Mounting Bracket

144865108
10329538: RNCC: 3 | RNVC: 2

21 Mar 1997

5340-14-542-2382
Loop Clamp

145422382
602014108: RNCC: 3 | RNVC: 2
602014108: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-334-6253
Angle Bracket

143346253
79062275: RNCC: 3 | RNVC: 2
79062275: RNCC: 5 | RNVC: 9

1 Jun 1976

5340-14-489-8374
Block Fairlead

144898374
763378F5/6: RNCC: 3 | RNVC: 2

25 Aug 1997

5340-14-352-6452
Rod End Connector

143526452
112481: RNCC: 3 | RNVC: 2
BFCSAMM112481: RNCC: 5 | RNVC: 2

14 Nov 1978

5340-14-504-0191
Webbing Strap

145040191
20754-2: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-14-445-9914
Retaining Strap

144459914
23076808-5: RNCC: 3 | RNVC: 2

4 Mar 1991

5340-14-479-3534
Pawl Fastener

144793534
911C1: RNCC: 3 | RNVC: 2

10 Jan 1996

5340-14-433-2622
Mounting Bracket

144332622
5000915859: RNCC: 3 | RNVC: 2

18 Jul 1989

5340-14-449-7908
Support Hook

144497908
07267: RNCC: 3 | RNVC: 2
3 16 07267 EC: RNCC: 5 | RNVC: 2

11 Sep 1991

5340-14-409-1015
Retaining Clip

144091015
590877: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-326-8933
Strap Hinge

143268933
0000647454: RNCC: 3 | RNVC: 2
0000647454: RNCC: 5 | RNVC: 9
647454: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-305-2827
Clamping Catch

143052827
7115: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-358-6797
Cover Strip

143586797
160-182060-50: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-461-2924
Mounting Bracket

144612924
5000730217: RNCC: 3 | RNVC: 2
89287695: RNCC: 5 | RNVC: 2

3 Mar 1993

5340-14-360-1654
Angle Bracket

143601654
A11A221160540: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-218-5994
Retaining Strap

142185994
M3C705-14-02: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-260-2969
Mounting Plate

142602969
A1-59639R1: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-353-1292
Retaining Strap

143531292
22296205: RNCC: 3 | RNVC: 2
22296205: RNCC: 3 | RNVC: 9

8 Dec 1978

5340-14-518-9851
Mounting Bracket

145189851
707069: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-433-5407
Bumper

144335407
8169997: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-410-6965
Angle Bracket

144106965
245779: RNCC: 3 | RNVC: 2
5172262600: RNCC: 3 | RNVC: 2
722626: RNCC: 5 | RNVC: 9

9 Jul 1986

5340-14-548-8128
Mounting Bracket

145488128
0322997150: RNCC: 3 | RNVC: 2

14 Feb 2006

5340-14-502-3050
Mounting Bracket

145023050
103092112301: RNCC: 3 | RNVC: 2
103092112301: RNCC: 5 | RNVC: 2

9 Dec 1997

5340-14-434-0830
Bumper

144340830
0870266M00: RNCC: 3 | RNVC: 2

5 Sep 1989

5340-14-444-7053
Bumper

144447053
39538922: RNCC: 3 | RNVC: 2
39538922: RNCC: 5 | RNVC: 9
6126: RNCC: 5 | RNVC: 9

16 Jan 1991

5340-14-383-3651
Bumper

143833651
213474: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-554-8840
Loop Clamp

145548840
78651DH6AP: RNCC: 1 | RNVC: 2
78651DH6AP: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-450-4987
Retaining Strap

144504987
BLC236940: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-14-535-3447
Mounting Plate

145353447
401201: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-434-3611
Blank Panel

144343611
39232399: RNCC: 3 | RNVC: 2
39232399: RNCC: 5 | RNVC: 9

20 Sep 1989

5340-14-261-2221
Retaining Strap

142612221
175-50-62: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-461-6328
Mounting Bracket

144616328
ISE164859: RNCC: 3 | RNVC: 2
91714351: RNCC: 5 | RNVC: 2

17 Mar 1993

5340-14-520-5205
Mounting Bracket

145205205
45593407: RNCC: 3 | RNVC: 2
45593407: RNCC: 5 | RNVC: 9

19 May 2000

5340-14-383-1276
Retaining Strap

143831276
1031120128: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-340-2989
Rim Lock Set

143402989
0000659636: RNCC: 3 | RNVC: 2
659636: RNCC: 5 | RNVC: 9

14 Feb 1977

5340-14-031-8378
Butt Hinge

140318378
100380451230: RNCC: 3 | RNVC: 2
VDP1052: RNCC: 5 | RNVC: 2

5 Jul 1980

5340-14-527-3708
Mounting Plate

145273708
F127098: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-354-8430
Tubular Fairlead

143548430
131074A: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-557-7321
Utility Resilient Mount

145577321
DRS18X50: RNCC: 3 | RNVC: 2

7 Jul 2008

5340-14-444-7329
Bumper

144447329
71096: RNCC: 3 | RNVC: 2

21 Jan 1991

5340-14-551-0020
Mounting Bracket

145510020
925144008: RNCC: 3 | RNVC: 2

18 Aug 2006

5340-14-441-1349
Mounting Bracket

144411349
16766070: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-543-1342
Loop Clamp

145431342
51323105014: RNCC: 3 | RNVC: 2

26 Aug 2004

5340-14-368-6574
Retaining Strap

143686574
970751: RNCC: 3 | RNVC: 2
970751: RNCC: 5 | RNVC: 9

20 Feb 1981

5340-14-547-5250
Angle Bracket

145475250
RA1M702201141N1: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-504-4729
Mounting Bracket

145044729
TR95317: RNCC: 3 | RNVC: 2

18 Feb 1998

5340-14-426-2393
Angle Bracket

144262393
8303212920: RNCC: 3 | RNVC: 2
8303212920: RNCC: 3 | RNVC: 2

9 Aug 1988

5340-14-540-5635
Mounting Bracket

145405635
50108461: RNCC: 3 | RNVC: 2

6 Apr 2004

5340-14-546-6886
Mounting Bracket

145466886
5010631522: RNCC: 3 | RNVC: 2

2 Aug 2005

5340-14-493-7763
Mounting Bracket

144937763
BLC238817: RNCC: 3 | RNVC: 2
F300 0T 013 9811: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-556-7081
Utility Resilient Mount

145567081
FAX19800019: RNCC: 3 | RNVC: 2
189773705: RNCC: 5 | RNVC: 2

4 Apr 2008

Load More Results