What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 145 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 145 of 446

5340-14-364-7148
Access Cover

143647148
103194-01: RNCC: 3 | RNVC: 2
C103194-01: RNCC: 5 | RNVC: 2
103194-01: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-517-9258
Stand Base

145179258
97S17-19: RNCC: 3 | RNVC: 2

18 Jan 2000

5340-14-469-6824
Pipe Hanger

144696824
78733-020-022: RNCC: 3 | RNVC: 2

4 May 1994

5340-14-372-2359
Strap End Clip

143722359
12230-052-161: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-316-1547
Synchro Clamp

143161547
NO PRIMARY REF14-316-1547: RNCC: 3 | RNVC: 2
125002: RNCC: 5 | RNVC: 9
C125002: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-217-3439
Rod End Clevis

142173439
3160S73-26-429: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-426-1464
Access Cover

144261464
M208-28020: RNCC: 3 | RNVC: 2

4 Aug 1988

5340-14-533-1800
Access Cover

145331800
915-406: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-14-549-8232
Angle Bracket

145498232
2092703-001: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-246-9774
Retaining Clip

142469774
NO PRIMARY REF14-246-9774: RNCC: 3 | RNVC: 2
5932-04: RNCC: 5 | RNVC: 2
0853713000: RNCC: 5 | RNVC: 2
49034D: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-402-8779
Angle Bracket

144028779
NO PRIMARY REF14-402-8779: RNCC: 3 | RNVC: 2
20C7665AREP1: RNCC: 5 | RNVC: 9

19 Jul 1985

5340-14-418-0801
Synchro Clamp

144180801
NO PRIMARY REF14-418-0801: RNCC: 3 | RNVC: 2
12696500: RNCC: 5 | RNVC: 9

6 Aug 1987

5340-14-299-3351
Mending Plate

142993351
MY20551-8505: RNCC: 3 | RNVC: 2
MY20-551-85-05: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-524-6609
Mounting Bracket

145246609
504446: RNCC: 3 | RNVC: 2

3 Apr 2001

5340-14-471-9473
Detent Plunger

144719473
38510301: RNCC: 3 | RNVC: 2
38510301: RNCC: 5 | RNVC: 9

28 Sep 1994

5340-14-366-9686
Bow Handle

143669686
24C6849: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-405-8870
Mounting Plate

144058870
4147367: RNCC: 3 | RNVC: 2

11 Dec 1985

5340-14-464-4166
Cover Strip

144644166
22S0444703: RNCC: 3 | RNVC: 2
22S0444703: RNCC: 5 | RNVC: 2

28 Jul 1993

5340-14-455-4303
Mounting Plate

144554303
45673628: RNCC: 3 | RNVC: 2

21 May 1992

5340-14-466-8475
Utility Access Door

144668475
5100324: RNCC: 3 | RNVC: 2
5000915737: RNCC: 5 | RNVC: 2

3 Dec 1993

5340-14-426-4663
Cover Strip

144264663
CJ98X162X80X1,5AG3: RNCC: 3 | RNVC: 2

1 Sep 1988

5340-14-543-0305
Access Cover

145430305
A11A532320560: RNCC: 3 | RNVC: 2

18 Aug 2004

5340-14-531-2548
Loop Clamp

145312548
52313105025: RNCC: 3 | RNVC: 2

6 Aug 2002

5340-14-357-8956
Leaf Spring

143578956
0000272942: RNCC: 3 | RNVC: 2
0000272942: RNCC: 5 | RNVC: 9
272942: RNCC: 5 | RNVC: 9

20 Jul 1979

5340-14-386-8269
Rim Lock

143868269
3200D7171: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-532-4805
Mounting Bracket

145324805
8041095N00: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-14-450-4827
Rod End Connector

144504827
A26629: RNCC: 3 | RNVC: 2
318671: RNCC: 5 | RNVC: 2

9 Oct 1991

5340-14-353-6810
Retaining Strap

143536810
650-403-242-0: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-422-7584
Rim Lock Set

144227584
625 050 08: RNCC: 3 | RNVC: 2
0193629A00: RNCC: 5 | RNVC: 2
911-220A: RNCC: 5 | RNVC: 2
91594599: RNCC: 5 | RNVC: 2
911-220 A: RNCC: 5 | RNVC: 9
0798: RNCC: 5 | RNVC: 9

17 Mar 1988

5340-14-543-4579
Bumper

145434579
4759-3402: RNCC: 3 | RNVC: 2

3 Nov 2004

5340-14-462-4934
Pawl Fastener

144624934
M406654: RNCC: 3 | RNVC: 2
M406654: RNCC: 5 | RNVC: 2
RAB0975: RNCC: 5 | RNVC: 2
M406654: RNCC: 5 | RNVC: 2

27 Apr 1993

5340-14-348-0742
Clamp Bolt Assembly

143480742
V3SD18103-3: RNCC: 3 | RNVC: 2
SDVIB18103-3: RNCC: 5 | RNVC: 2
V3SD18103-3: RNCC: 5 | RNVC: 2

29 Mar 1978

5340-14-508-1335
Flush Catch Claw

145081335
10198943: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-450-6693
Rod End Connector

144506693
646313: RNCC: 3 | RNVC: 2
8033420P00: RNCC: 5 | RNVC: 2

16 Oct 1991

5340-14-388-8081
Strap Fastener Loop

143888081
005417013P: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-375-9058
Access Cover

143759058
NO PRIMARY REF14-375-9058: RNCC: 3 | RNVC: 2
404207202: RNCC: 5 | RNVC: 2
404207202: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-486-3391
Loop Clamp

144863391
01279-9: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-475-2121
Loop Clamp

144752121
CR30-45: RNCC: 3 | RNVC: 2

22 Mar 1995

5340-14-525-5757
Butt Hinge

145255757
20 242 030 9450: RNCC: 3 | RNVC: 2
114036.10: RNCC: 3 | RNVC: 9
14-03610: RNCC: 5 | RNVC: 9

14 Jun 2001

5340-14-528-3787
Mounting Bracket

145283787
27119709-8: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-14-453-4329
Quick Release Pin

144534329
620C6B35: RNCC: 3 | RNVC: 2

19 Feb 1992

5340-14-532-2244
Swivel Caster

145322244
L.RD 162 R.ST: RNCC: 3 | RNVC: 2
91726172: RNCC: 5 | RNVC: 2

21 Oct 2002

5340-14-286-4244
Buckle

142864244
34216-025: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-465-4867
Mortise Lock Set

144654867
365A25-3067-22: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-462-4758
Block Fairlead

144624758
PE49068-507: RNCC: 3 | RNVC: 2

23 Apr 1993

5340-14-372-1708
Access Door Hinge

143721708
14-7-3397: RNCC: 3 | RNVC: 2
SYQ4519: RNCC: 5 | RNVC: 2

1 Sep 1981

5340-14-031-8751
Clamping Catch

140318751
M376-228000: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-314-8478
Loop Clamp

143148478
NO PRIMARY REF14-314-8478: RNCC: 3 | RNVC: 2
20660201: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-529-3512
Mounting Plate

145293512
457-12763-000: RNCC: 3 | RNVC: 2

22 Mar 2002

5340-14-348-7310
Lock-Release Lever

143487310
NO PRIMARY REF14-348-7310: RNCC: 3 | RNVC: 2
ST453M11P19: RNCC: 5 | RNVC: 2
ST453M11P19: RNCC: 5 | RNVC: 9

19 Apr 1978

5340-14-409-9072
Bumper

144099072
8723-21: RNCC: 3 | RNVC: 2
7903088023: RNCC: 5 | RNVC: 2

4 Jun 1986

5340-14-532-9740
Access Cover

145329740
D65739-7: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-14-479-6050
Retaining Strap

144796050
23627062-5: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-14-353-2243
Bumper

143532243
4192-311A513: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-517-5733
Pipe Hanger

145175733
78733-018-033A: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-272-5762
Butt Hinge

142725762
160-10013-97: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-521-5905
Angle Bracket

145215905
350A58-1007-2001: RNCC: 3 | RNVC: 2

23 Aug 2000

5340-14-394-1637
Butt Hinge

143941637
1014-30X200ACIERDECAPE: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-456-9443
Mounting Plate

144569443
3704MRC9-02: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-14-490-3112
Mounting Bracket

144903112
J05085-04-0600P004: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-450-7381
Retaining Band

144507381
52547810600: RNCC: 3 | RNVC: 2
671528-00: RNCC: 5 | RNVC: 2

21 Oct 1991

5340-14-285-2969
Bumper

142852969
2-11374: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-513-8672
Lock-Release Lever

145138672
647473: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-459-6674
Arched Cushion

144596674
MAT169-0012F19DE44: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-500-6377
Loop Clamp

145006377
E64201129000: RNCC: 3 | RNVC: 2
F300 0T 024 6563: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-518-2568
Lock Bolt

145182568
044-065-010: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-14-366-5675
Retaining Band

143665675
360A34-1041-00: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-300-6114
Retaining Strap

143006114
53544-3: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-340-3378
Access Cover

143403378
M3C704-92-02: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-360-8200
Mending Plate

143608200
1101686-02: RNCC: 3 | RNVC: 9

19 Dec 1979

5340-14-297-7060
Access Cover

142977060
P0007181-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-487-5584
Mounting Plate

144875584
78787-050A13F: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-336-7196
Angle Bracket

143367196
16218151: RNCC: 3 | RNVC: 2
16218151: RNCC: 5 | RNVC: 9

7 Oct 1976

5340-14-526-4572
Angle Bracket

145264572
RA1M705416110A1: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-466-0864
Synchro Clamp

144660864
3511 265 51131: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-14-429-0450
Mounting Bracket

144290450
093666L: RNCC: 3 | RNVC: 2

4 Jan 1989

5340-14-411-4116
Cover Strip

144114116
MY2055217514G01: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-313-7604
Mending Plate

143137604
0210091070: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-504-1536
Mounting Bracket

145041536
009385019R: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-336-7123
Angle Bracket

143367123
194497: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-348-4002
Retaining Bail

143484002
36316: RNCC: 3 | RNVC: 9

29 Mar 1978

5340-14-476-0984
Mounting Plate

144760984
222-3018-659: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-400-0205
Access Cover

144000205
608172: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-317-9035
Slide Keeper

143179035
11621-160-001: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-350-6085
Synchro Clamp

143506085
3160S41-11-102-1: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-441-1889
Metal Grille

144411889
A1600-1-69: RNCC: 3 | RNVC: 2
91639465: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-14-400-7859
Bumper

144007859
121S63-491-03-0: RNCC: 3 | RNVC: 2

21 May 1985

5340-14-336-8355
Rigid Caster

143368355
TR3-80-33L: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-437-4517
Mounting Bracket

144374517
332A61-2337-08: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-217-8427
Loop Clamp

142178427
NSE552-12-116: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-305-0397
Loop Clamp

143050397
M3C701-380: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-298-8280
Belt-Strap Keeper

142988280
11322-057: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-336-8022
Rigid Caster

143368022
NO PRIMARY REF14-336-8022: RNCC: 3 | RNVC: 2
15524370: RNCC: 5 | RNVC: 9

7 Oct 1976

5340-14-372-2183
Plug Button

143722183
NO PRIMARY REF14-372-2183: RNCC: 3 | RNVC: 2
90461-64: RNCC: 5 | RNVC: 9
20228-04: RNCC: 5 | RNVC: 9

1 Sep 1981

5340-14-488-4242
Runner

144884242
A10-74-818-21-0: RNCC: 3 | RNVC: 2

7 May 1997

5340-14-389-4715
Mending Plate

143894715
365A61-3235-20: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-366-3088
Mending Plate

143663088
341A21-1013-52: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-412-2013
Mending Plate

144122013
330A25-2037-29: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-386-6724
Bridge Clamp

143866724
853-200-017-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-318-9137
Plug Button

143189137
121S81-231-00-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-277-1006
Belt-Strap Keeper

142771006
NO PRIMARY REF14-277-1006: RNCC: 3 | RNVC: 2
9C: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-213-9270
Synchro Clamp

142139270
S2202-1DG: RNCC: 3 | RNVC: 2
S2202-1: RNCC: 5 | RNVC: 2
S2202-1DG: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-369-2365
Arched Cushion

143692365
650-403-029-0: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-302-0010
Pipe Hanger

143020010
A10-11-712-05-1: RNCC: 3 | RNVC: 2
A10-11-712-05-1: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-276-0046
Control Rod

142760046
U0025239-0: RNCC: 3 | RNVC: 2
GSM137-014F17: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-454-8970
Runner

144548970
2085-02-035: RNCC: 3 | RNVC: 2
89411597: RNCC: 5 | RNVC: 9

24 Apr 1992

5340-14-355-3822
Pipe Hanger

143553822
121S71-311-02-0: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-484-2658
Loop Clamp

144842658
55503: RNCC: 3 | RNVC: 2
501-998-733-0: RNCC: 5 | RNVC: 2

31 Oct 1996

5340-14-501-0912
Loop Clamp

145010912
RSGU1-5-15W5: RNCC: 3 | RNVC: 2
91729076: RNCC: 5 | RNVC: 2
F300 0T 025 1267: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-333-7418
Loop Clamp

143337418
4404-10-09: RNCC: 3 | RNVC: 2

23 Apr 1976

5340-14-224-6064
Bumper

142246064
NO PRIMARY REF14-224-6064: RNCC: 3 | RNVC: 2
436925: RNCC: 5 | RNVC: 9
38468B: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-551-5925
Loop Clamp

145515925
50101246-008: RNCC: 3 | RNVC: 2

6 Oct 2006

5340-14-384-3187
Loop Clamp

143843187
92831231: RNCC: 3 | RNVC: 2
9-28GE23: RNCC: 5 | RNVC: 2

4 May 1983

5340-14-353-4198
Synchro Clamp

143534198
26032002500: RNCC: 3 | RNVC: 2
308967-02: RNCC: 5 | RNVC: 2
260320025: RNCC: 5 | RNVC: 9

8 Dec 1978

5340-14-525-6534
Access Cover

145256534
20 242 030 5250: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-553-9661
Mounting Plate

145539661
10669865000: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-14-442-6594
Utility Access Door

144426594
TB3050708: RNCC: 3 | RNVC: 2
71234: RNCC: 5 | RNVC: 9

24 Oct 1990

5340-14-535-9047
Mounting Bracket

145359047
5633832R00: RNCC: 3 | RNVC: 2
5633832R00: RNCC: 5 | RNVC: 2

27 Jun 2003

5340-14-351-7992
Access Cover

143517992
02536800900: RNCC: 3 | RNVC: 2
025368009: RNCC: 5 | RNVC: 2

12 Sep 1978

5340-14-484-7441
Mounting Plate

144847441
2344361P00: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-318-9458
Access Cover

143189458
0067010090: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-468-6890
Rod End Connector

144686890
A65896: RNCC: 3 | RNVC: 2

16 Mar 1994

5340-14-202-5920
Access Cover

142025920
0000350180: RNCC: 3 | RNVC: 2
0000350180: RNCC: 5 | RNVC: 9
350180: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-14-511-9065
Access Cover

145119065
941667315: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-14-363-9962
Angle Bracket

143639962
121A63-203-21-0: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-433-9967
Mounting Plate

144339967
RP904455: RNCC: 3 | RNVC: 2

28 Aug 1989

5340-14-489-1160
Access Cover

144891160
802330140113: RNCC: 3 | RNVC: 2
SDM802330140113: RNCC: 5 | RNVC: 9

27 Jun 1997

5340-14-442-4131
Access Cover

144424131
110KZ01: RNCC: 3 | RNVC: 2

16 Oct 1990

5340-14-478-9946
Access Cover

144789946
46246571: RNCC: 3 | RNVC: 2
46246571: RNCC: 3 | RNVC: 9

6 Dec 1995

5340-14-444-7223
Mounting Plate

144447223
71405: RNCC: 3 | RNVC: 2

21 Jan 1991

5340-14-546-0008
Webbing Strap

145460008
154466-1: RNCC: 3 | RNVC: 2

2 Jun 2005

5340-14-502-3807
Mounting Bracket

145023807
40.356.3532: RNCC: 3 | RNVC: 2
01.3.40.356.3532: RNCC: 5 | RNVC: 2

9 Dec 1997

5340-14-436-1298
Quick Release Pin

144361298
413C10R32: RNCC: 3 | RNVC: 2

6 Dec 1989

5340-14-517-7121
Angle Bracket

145177121
503-4970-001: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-443-5149
Mounting Plate

144435149
7524-0001045: RNCC: 3 | RNVC: 9
CAP230-70-15-02A: RNCC: 5 | RNVC: 9

27 Nov 1990

5340-14-513-4296
Angle Bracket

145134296
NO PRIMARY REF14-513-4296: RNCC: 3 | RNVC: 2
NNP 1240860703012: RNCC: 5 | RNVC: 9

17 Mar 1999

5340-14-252-6864
Angle Bracket

142526864
7055-018: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-433-3974
Retaining Strap

144333974
HB161N16: RNCC: 3 | RNVC: 2
0221889K00: RNCC: 5 | RNVC: 2
ST-2500: RNCC: 5 | RNVC: 9

24 Jul 1989

5340-14-305-8572
Bridge Clamp

143058572
SP1-01-10-02: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-291-4027
Retaining Strap

142914027
NO PRIMARY REF14-291-4027: RNCC: 3 | RNVC: 2
0400420100: RNCC: 5 | RNVC: 2
9560110690: RNCC: 5 | RNVC: 2
53402: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-533-7457
Bow Handle

145337457
168E915-00: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-14-404-3969
Retaining Strap

144043969
9760-75: RNCC: 3 | RNVC: 9

30 Oct 1985

5340-14-230-7340
Loop Clamp

142307340
BR752-40: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-457-5520
Loop Clamp

144575520
SP217,2PP-DPAS: RNCC: 3 | RNVC: 2
02101686: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-380-2873
Bumper

143802873
365A24-1189-20: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-366-3757
Expansion Plug

143663757
1021113800: RNCC: 3 | RNVC: 2
1136-48: RNCC: 5 | RNVC: 2
0003311453: RNCC: 5 | RNVC: 2
0003311453: RNCC: 5 | RNVC: 9
DAH1021113800: RNCC: 5 | RNVC: 9
3311453: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-308-3727
Loop Clamp

143083727
E4M709-30: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-382-1753
Permanent Magnet

143821753
3037-10: RNCC: 3 | RNVC: 2
3037ALNIC0600-10: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-382-4548
Access Cover

143824548
435-65001-409: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-257-1311
Mounting Plate

142571311
330A58-1273-21: RNCC: 3 | RNVC: 2
330A58-1273-2100: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-432-9551
Access Cover

144329551
1018-56: RNCC: 3 | RNVC: 2
543484: RNCC: 5 | RNVC: 2
9350046180: RNCC: 5 | RNVC: 2

5 Jul 1989

5340-14-440-3336
Loop Clamp

144403336
NO PRIMARY REF14-440-3336: RNCC: 3 | RNVC: 2
984603-028-055: RNCC: 5 | RNVC: 9

11 Jul 1990

5340-14-290-5358
Angle Bracket

142905358
121E23-575-12-1: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-421-9273
Loop Clamp

144219273
NO PRIMARY REF14-421-9273: RNCC: 3 | RNVC: 2
68940045: RNCC: 5 | RNVC: 9
AN742D45: RNCC: 5 | RNVC: 9

10 Feb 1988

5340-14-483-9842
Access Cover

144839842
6-451407: RNCC: 3 | RNVC: 9
6-451408: RNCC: 3 | RNVC: 9
TID37330: RNCC: 5 | RNVC: 2

16 Oct 1996

5340-14-416-8333
Loop Clamp

144168333
A11A769010011: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-457-7549
Angle Bracket

144577549
6230302: RNCC: 3 | RNVC: 2
5045235: RNCC: 5 | RNVC: 9

17 Sep 1992

5340-14-529-6970
Mounting Bracket

145296970
10503522: RNCC: 3 | RNVC: 2

4 Apr 2002

5340-14-500-9258
Section Block Clamp

145009258
E68200000019: RNCC: 3 | RNVC: 2
F300 0T 024 9468: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-523-6242
Mounting Plate

145236242
3233679R1: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-553-6852
Mounting Plate

145536852
82112593000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-341-1757
Loop Clamp

143411757
M3E701-033: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-285-2831
Retaining Strap

142852831
6108-1514: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-454-5348
Mounting Plate

144545348
2085-02-013: RNCC: 3 | RNVC: 2
89411575: RNCC: 5 | RNVC: 9

2 Apr 1992

5340-14-444-5328
Plug Button

144445328
MB700-180: RNCC: 3 | RNVC: 2
MB700180: RNCC: 5 | RNVC: 2

15 Jan 1991

5340-14-514-4653
Mounting Plate

145144653
45219308: RNCC: 3 | RNVC: 2
45219308: RNCC: 5 | RNVC: 2
IF-192-0624: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-461-1832
Compression Cup

144611832
RU968-0041M1531P22: RNCC: 3 | RNVC: 2

24 Feb 1993

5340-14-521-1072
Arched Cushion

145211072
MAT169-0027F18DE48: RNCC: 3 | RNVC: 2

7 Jul 2000

5340-14-528-9416
Bail Handle

145289416
6040-U53-PC: RNCC: 3 | RNVC: 2
1131532G00: RNCC: 5 | RNVC: 2
835343: RNCC: 5 | RNVC: 2

27 Feb 2002

5340-14-286-4233
Strap End Clip

142864233
12204-040: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-383-1102
Utility Access Door

143831102
366A24-0120-0601: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-535-6617
Mounting Bracket

145356617
1926-100-011B: RNCC: 3 | RNVC: 2

13 Jun 2003

5340-14-321-1385
Bumper

143211385
NO PRIMARY REF14-321-1385: RNCC: 3 | RNVC: 2
79050-68: RNCC: 5 | RNVC: 2
80490-256: RNCC: 5 | RNVC: 2
1010: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-424-9672
Doorknob

144249672
RIV-BLOC JUNIOR-CONDAMN-BEZAULT: RNCC: 3 | RNVC: 2

16 Jun 1988

5340-14-520-6185
Pad Eye

145206185
A5-67299: RNCC: 3 | RNVC: 2

24 May 2000

5340-14-206-6144
Access Cover

142066144
611-990-001-0: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-431-4119
Clamping Catch

144314119
80-07-12: RNCC: 3 | RNVC: 2

17 Apr 1989

5340-14-365-2014
Rod End Clevis

143652014
NO PRIMARY REF14-365-2014: RNCC: 3 | RNVC: 2
292-40-00-05: RNCC: 5 | RNVC: 9
292-400005: RNCC: 5 | RNVC: 9

19 Sep 1980

5340-14-481-3260
Mounting Bracket

144813260
23241162-6: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-453-8527
T Plate

144538527
MTM01NM130001: RNCC: 3 | RNVC: 9

12 Mar 1992

5340-14-501-0016
Mounting Bracket

145010016
10174510: RNCC: 3 | RNVC: 2
F300 0T 025 0232: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-542-2961
Plug Button

145422961
954757408: RNCC: 3 | RNVC: 2
954757408: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-532-8938
Blank Panel

145328938
A5TC882818: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-14-509-2349
Metal Grille

145092349
MECZ6142: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-376-7809
Butt Hinge

143767809
DA2C111317816N1: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-553-0513
Mounting Plate

145530513
CR78395: RNCC: 3 | RNVC: 2

27 Feb 2007

5340-14-472-3749
Pipe Hanger

144723749
PM1A522124005: RNCC: 3 | RNVC: 2
PM1A522124005: RNCC: 5 | RNVC: 2

19 Oct 1994

5340-14-544-4528
Utility Access Door

145444528
5010559793: RNCC: 3 | RNVC: 2

1 Feb 2005

5340-14-495-9123
Access Cover

144959123
F00153128: RNCC: 3 | RNVC: 2
F00153128: RNCC: 5 | RNVC: 9
F300 0T 020 4779: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-471-9474
Mounting Bracket

144719474
38512891: RNCC: 3 | RNVC: 2
38512891: RNCC: 5 | RNVC: 9

28 Sep 1994

5340-14-548-4624
Retaining Strap

145484624
MA000210: RNCC: 3 | RNVC: 2

19 Jan 2006

5340-14-261-2191
Rod End Clevis

142612191
175-44-68: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-546-4902
Locking Stay

145464902
61027012AA: RNCC: 3 | RNVC: 2

7 Jul 2005

5340-14-400-4242
Control Rod

144004242
AV1350-3: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-490-0724
Mounting Bracket

144900724
365A68-8076-00: RNCC: 3 | RNVC: 2

10 Sep 1997

5340-14-406-9032
Handwheel

144069032
NO PRIMARY REF14-406-9032: RNCC: 3 | RNVC: 2
54-10002: RNCC: 5 | RNVC: 2

14 Jan 1986

5340-14-455-3097
Mounting Bracket

144553097
IF164-232: RNCC: 3 | RNVC: 9

21 May 1992

5340-14-428-7229
Loop Clamp

144287229
S467G8-2: RNCC: 3 | RNVC: 2
5000788070: RNCC: 5 | RNVC: 2

14 Dec 1988

5340-14-365-2637
Pipe Hanger

143652637
366A75-3074-20: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-413-9209
Strap Fastener Loop

144139209
412702000016: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-350-3875
Lock-Release Lever

143503875
7920035431: RNCC: 3 | RNVC: 2
7615-14: RNCC: 5 | RNVC: 2

12 Jul 1978

5340-14-530-6806
Pad Eye

145306806
T890A00X0023: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-526-4771
Pipe Hanger

145264771
78733-038-030A: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-486-3392
Loop Clamp

144863392
01280-7: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-423-7920
Quick Release Pin

144237920
29400149: RNCC: 3 | RNVC: 2

28 Apr 1988

5340-14-436-2680
Quick Release Pin

144362680
011470T: RNCC: 3 | RNVC: 2

12 Dec 1989

5340-14-392-4609
Butt Hinge

143924609
1-36X32LAIT0N: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-489-2666
Angle Bracket

144892666
13-080-300: RNCC: 3 | RNVC: 2
13-080-300: RNCC: 5 | RNVC: 2

9 Jul 1997

5340-14-489-6759
Mounting Bracket

144896759
332P65-1152-01: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-460-1820
Mounting Bracket

144601820
LN214-001FIA05: RNCC: 3 | RNVC: 2
RAB0242: RNCC: 5 | RNVC: 2

14 Jan 1993

5340-14-527-3383
Rod End Clevis

145273383
A65452-4: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-479-6070
Mending Plate

144796070
23627329-6: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-14-320-4460
Mending Plate

143204460
3511 210 03711: RNCC: 3 | RNVC: 2
3511-210-03711: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-465-1829
Mounting Plate

144651829
365P68-1558-00: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-486-3655
Mounting Bracket

144863655
25455890: RNCC: 3 | RNVC: 2
2-545589-0: RNCC: 5 | RNVC: 2

12 Mar 1997

5340-14-482-1175
Threaded Rod End

144821175
16297140: RNCC: 1 | RNVC: 2
044A48-500000-0002: RNCC: 3 | RNVC: 2
0906769R00: RNCC: 5 | RNVC: 2

20 Jun 1996

5340-14-473-8261
Angle Bracket

144738261
332A41-0412-01: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-446-0308
Webbing Strap

144460308
TB3050720: RNCC: 1 | RNVC: 2
LE13086-028-000: RNCC: 3 | RNVC: 2
4100: RNCC: 5 | RNVC: 2
LE13086028000: RNCC: 5 | RNVC: 2
70980: RNCC: 5 | RNVC: 9

4 Mar 1991

5340-14-254-2309
Mending Plate

142542309
W00231-35: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-310-6054
Tee Hinge

143106054
73-042-301: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-323-3777
Handwheel

143233777
GSM137-018F4REP1: RNCC: 3 | RNVC: 2
000MA060R1F4: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-476-0983
Mounting Plate

144760983
222-3018-076: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-407-2925
Loop Clamp

144072925
PE27019RI18: RNCC: 3 | RNVC: 2
85-800-9887: RNCC: 6 | RNVC: 9

12 Feb 1986

5340-14-477-3807
Webbing Strap

144773807
1024012-2630: RNCC: 3 | RNVC: 2
102-4012-2630: RNCC: 5 | RNVC: 2

23 Aug 1995

5340-14-439-8337
Mounting Bracket

144398337
332A58-1317-22: RNCC: 3 | RNVC: 2

23 May 1990

5340-14-374-9545
Detent Plunger

143749545
345401010302: RNCC: 3 | RNVC: 2
85-691-7083: RNCC: 6 | RNVC: 9

30 Jan 1982

5340-14-513-4052
Bridge Clamp

145134052
682-43615-00: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-14-477-0069
Mounting Bracket

144770069
330A27-5045-20: RNCC: 3 | RNVC: 2

12 Jul 1995

5340-14-508-0431
Loop Clamp

145080431
RSGU1-23-15W1: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-541-9951
Mounting Bracket

145419951
20035-198: RNCC: 3 | RNVC: 2
502118001024A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-357-3489
Lock-Release Lever

143573489
265-121-03: RNCC: 3 | RNVC: 2
85-688-9736: RNCC: 6 | RNVC: 9

7 Jun 1979

5340-14-462-7175
Swivel Caster

144627175
109-4100FRR: RNCC: 3 | RNVC: 9
N109-4100FRR: RNCC: 5 | RNVC: 9
MPR109-4100FRR: RNCC: 5 | RNVC: 9
109-4100FR: RNCC: 5 | RNVC: 9

28 Apr 1993

5340-14-404-3023
Runner

144043023
0E/C25046600: RNCC: 3 | RNVC: 2
C25046600: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-14-205-8977
Rigid Caster

142058977
253-5M361P58A: RNCC: 3 | RNVC: 9
PA253-5M361P58A: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-521-7029
Angle Bracket

145217029
160-88902-08: RNCC: 3 | RNVC: 2

6 Sep 2000

5340-14-407-6794
Control Rod

144076794
4685-003: RNCC: 3 | RNVC: 2

27 Feb 1986

5340-14-335-4374
Bridge Clamp

143354374
NO PRIMARY REF14-335-4374: RNCC: 3 | RNVC: 2
380171: RNCC: 5 | RNVC: 9

30 Jun 1976

5340-14-545-6109
Loop Clamp

145456109
30413-00: RNCC: 3 | RNVC: 2

25 Apr 2005

5340-14-512-5465
Section Block Clamp

145125465
F704-72-01M1: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-433-2954
Loop Clamp

144332954
620-020-564-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-14-341-1773
Loop Clamp

143411773
M3E704-115: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-429-1062
Angle Bracket

144291062
A10-11-355-09-1: RNCC: 3 | RNVC: 2
A10-11-355-09-1: RNCC: 5 | RNVC: 2
85-693-7020: RNCC: 6 | RNVC: 9

11 Jan 1989

5340-14-241-6159
Flush Catch

142416159
H5000-064-142: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-460-9204
Bumper

144609204
15054: RNCC: 3 | RNVC: 2
410896: RNCC: 3 | RNVC: 2

16 Feb 1993

5340-14-465-5301
Loop Clamp

144655301
A68715: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-462-0456
Mounting Bracket

144620456
4MP12130170: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-352-8376
Loop Clamp

143528376
3160S72-40-051: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-369-9392
Mounting Plate

143699392
1600-10-004: RNCC: 3 | RNVC: 2
160010004: RNCC: 5 | RNVC: 2

18 May 1981

5340-14-311-7768
Mending Plate

143117768
3271-09-01-003: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-451-0984
Rod End Connector

144510984
BLC238760: RNCC: 3 | RNVC: 2

30 Oct 1991

5340-14-481-0600
Rod End Connector

144810600
264409: RNCC: 3 | RNVC: 2

18 Apr 1996

5340-14-479-5705
Roller Holder

144795705
23221488-2: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-14-454-1493
Eye Hook

144541493
G73: RNCC: 3 | RNVC: 2
G73: RNCC: 5 | RNVC: 2
440012: RNCC: 5 | RNVC: 2

21 Mar 1992

5340-14-317-9201
Strap Fastener Loop

143179201
3547: RNCC: 3 | RNVC: 9
AB64: RNCC: 5 | RNVC: 2
3547: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-542-8021
Rod End Connector

145428021
T321G1002124: RNCC: 3 | RNVC: 2

14 Aug 2004

5340-14-458-2352
Hook Handle

144582352
321115020: RNCC: 3 | RNVC: 9
1370-0: RNCC: 5 | RNVC: 9

14 Oct 1992

5340-14-541-4038
Mounting Bracket

145414038
21244006-9: RNCC: 3 | RNVC: 2

8 Jun 2004

5340-14-413-6227
Loop Clamp

144136227
MS21919DG12: RNCC: 3 | RNVC: 2
91303925: RNCC: 5 | RNVC: 2
00-682-1617: RNCC: 6 | RNVC: 9

6 Jan 1987

5340-14-393-6070
Mending Plate

143936070
NO PRIMARY REF14-393-6070: RNCC: 3 | RNVC: 2
0329-411-203-11: RNCC: 5 | RNVC: 9

7 Jun 1984

5340-14-390-1698
Rod End Clevis

143901698
366A87-1047-20: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-314-4240
Threaded Rod End

143144240
H00299-99: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-297-4578
Rim Lock Set

142974578
5315-5715-1DT: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-396-1931
Synchro Clamp

143961931
410116: RNCC: 3 | RNVC: 2
6010-410116: RNCC: 5 | RNVC: 2

27 Nov 1984

5340-14-536-3306
Access Cover

145363306
D05/4121: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-14-473-3988
Angle Bracket

144733988
332A61-3362-20: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-263-9704
Bumper

142639704
330A22-2145-20: RNCC: 3 | RNVC: 2
330A22-2145-2000: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-529-1993
Mounting Bracket

145291993
457-10610-000: RNCC: 3 | RNVC: 2

15 Mar 2002

5340-14-531-8238
Cover Strip

145318238
341A65-7418-27: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-353-5563
Loop Clamp

143535563
NO PRIMARY REF14-353-5563: RNCC: 3 | RNVC: 2
SERFLEX14-22GP: RNCC: 5 | RNVC: 9

16 Jan 1979

5340-14-299-3346
Mending Plate

142993346
MY20550-001: RNCC: 3 | RNVC: 2
MY20-550-001: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-522-0807
Plug Button

145220807
W002143: RNCC: 3 | RNVC: 2
1002-62: RNCC: 5 | RNVC: 2
HADB 1002-62: RNCC: 5 | RNVC: 2

7 Mar 2001

5340-14-413-8710
Quick Release Pin

144138710
214197: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-486-1920
Angle Bracket

144861920
64010-2: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-475-0803
Mounting Plate

144750803
DM4-5023800: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-408-7298
Rod End Clevis

144087298
M3R773-91-01: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-435-3765
Swivel Caster

144353765
HP1BD125-73B01: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-480-3731
Eye Hook

144803731
146916: RNCC: 3 | RNVC: 9

7 Mar 1996

5340-14-431-7552
Mounting Plate

144317552
23602658-0: RNCC: 3 | RNVC: 2

10 May 1989

5340-14-278-3312
Pipe Hanger

142783312
160-11524-01: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-482-2983
Access Cover

144822983
D53964-1: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-14-296-0355
Bumper

142960355
10-1130-3: RNCC: 3 | RNVC: 2
13048-903: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-552-5802
Loop Clamp

145525802
E-1230-3 COMPLET: RNCC: 3 | RNVC: 2
0027614: RNCC: 5 | RNVC: 2

17 Jan 2007

5340-14-415-7393
Angle Bracket

144157393
320-560-901-0: RNCC: 3 | RNVC: 2

18 May 1987

5340-14-474-7446
Mounting Bracket

144747446
45284993: RNCC: 3 | RNVC: 2
45284993: RNCC: 3 | RNVC: 9

1 Mar 1995

5340-14-402-7677
Mounting Plate

144027677
9760-8: RNCC: 3 | RNVC: 9

19 Jul 1985

5340-14-374-2489
Butt Hinge

143742489
1-40X50DR0ITELAIT0NNICKELE: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-366-9338
Quick Release Pin

143669338
003255080P: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-333-2733
Mounting Plate

143332733
736104: RNCC: 3 | RNVC: 2
20736104-4: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-332-9066
Rod End Connector

143329066
BAZ2078: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-291-3917
T Plate

142913917
0235200030: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-501-6017
Tee Hinge

145016017
45594922: RNCC: 3 | RNVC: 2
45594922: RNCC: 5 | RNVC: 9
F300 0T 025 0284: RNCC: 6 | RNVC: 9

5 Nov 1997

5340-14-446-1275
Eye Hook

144461275
540289: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-437-2749
Bridge Clamp

144372749
20323618: RNCC: 3 | RNVC: 2
FC92-005-1: RNCC: 5 | RNVC: 2
20323618: RNCC: 5 | RNVC: 9

24 Jan 1990

5340-14-464-8275
Mortise Lock Set

144648275
12418-1-21N: RNCC: 3 | RNVC: 2

1 Sep 1993

5340-14-270-9978
Quick Release Pin

142709978
575-2: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-342-5109
Quick Release Pin

143425109
23C3139: RNCC: 3 | RNVC: 2

16 May 1977

5340-14-496-2053
Rod Retainer Clip

144962053
71827-0: RNCC: 3 | RNVC: 2
F300 0T 021 0232: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-379-3817
Runner

143793817
NO PRIMARY REF14-379-3817: RNCC: 3 | RNVC: 2
345-62454-0: RNCC: 5 | RNVC: 9
345624540: RNCC: 5 | RNVC: 9

1 Oct 1982

5340-14-312-0743
Mending Plate

143120743
3C001413-01: RNCC: 3 | RNVC: 2
3C001413-01: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-533-7405
Mounting Plate

145337405
331 0218 1 20 400: RNCC: 3 | RNVC: 2
331 0218 1 20 400: RNCC: 5 | RNVC: 9

20 Feb 2003

5340-14-354-8207
Angle Bracket

143548207
356002090002: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-354-3246
Mending Plate

143543246
356001000102: RNCC: 3 | RNVC: 2

30 Jan 1979

5340-14-475-0433
Mounting Plate

144750433
166047: RNCC: 3 | RNVC: 2
89170158: RNCC: 5 | RNVC: 2

16 Mar 1995

5340-14-462-3498
Mounting Bracket

144623498
SHS1C0235A: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-14-455-7767
Mounting Bracket

144557767
0000776728: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-245-3396
Angle Bracket

142453396
79001278: RNCC: 3 | RNVC: 2
79001278: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-555-7207
Mounting Plate

145557207
56955011AB: RNCC: 3 | RNVC: 2

10 Dec 2007

5340-14-481-8823
Loop Clamp

144818823
89 32 28: RNCC: 3 | RNVC: 2

6 Jun 1996

5340-14-518-8675
Clamping Catch

145188675
C711C3104104: RNCC: 3 | RNVC: 2
C711C3104104: RNCC: 5 | RNVC: 2

23 Feb 2000

5340-14-541-5478
Angle Bracket

145415478
31105232: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-351-5977
Webbing Strap

143515977
787: RNCC: 3 | RNVC: 9
11-593-200: RNCC: 5 | RNVC: 9

12 Sep 1978

5340-14-421-9807
Buckle

144219807
G990258-27: RNCC: 3 | RNVC: 2

10 Feb 1988

5340-14-412-1944
Mounting Plate

144121944
NO PRIMARY REF14-412-1944: RNCC: 3 | RNVC: 2
980119: RNCC: 5 | RNVC: 9

8 Oct 1986

5340-14-476-8543
Rim Lock

144768543
3802611: RNCC: 3 | RNVC: 2
18506851-2: RNCC: 5 | RNVC: 2
3802611: RNCC: 5 | RNVC: 2

5 Jul 1995

5340-14-447-9296
Clamp Bolt Assembly

144479296
S3SD18146-2: RNCC: 3 | RNVC: 2
V3SD18146-2: RNCC: 5 | RNVC: 2
S3SD18146-2: RNCC: 5 | RNVC: 2

10 Jun 1991

5340-14-459-7061
Mounting Bracket

144597061
PE75006-1F: RNCC: 3 | RNVC: 2

15 Dec 1992

5340-14-413-9995
Armature Stop

144139995
13-212-125: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-340-7854
Mending Plate

143407854
GSM861-007F12: RNCC: 3 | RNVC: 2
GSM861-07F12: RNCC: 5 | RNVC: 2

14 Feb 1977

5340-14-493-6593
Mounting Plate

144936593
F10A225004011: RNCC: 3 | RNVC: 2
85-695-2981: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-494-8850
Mounting Bracket

144948850
NO PRIMARY REF14-494-8850: RNCC: 3 | RNVC: 2
5420300: RNCC: 5 | RNVC: 9
F300 0T 018 0396: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-351-2459
Angle Bracket

143512459
262-100-04: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-359-6726
Loop Clamp

143596726
7046740424: RNCC: 3 | RNVC: 2
1715-09: RNCC: 5 | RNVC: 2

15 Oct 1979

5340-14-454-3962
Mounting Plate

144543962
31-17074C: RNCC: 3 | RNVC: 2
31-17074C: RNCC: 5 | RNVC: 9

1 Apr 1992

5340-14-534-0980
Bumper

145340980
332A22-1385-02: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-529-6854
Retaining Band

145296854
3511-192-35351: RNCC: 3 | RNVC: 2

4 Apr 2002

5340-14-482-4178
Angle Bracket

144824178
78703-20-033: RNCC: 3 | RNVC: 2

11 Jul 1996

5340-14-511-6246
Pipe Hanger

145116246
78733-026-022B: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-335-0480
Handwheel

143350480
MAT137-006F3AVIORB: RNCC: 3 | RNVC: 2
GSM137-007F5AVI0RB: RNCC: 5 | RNVC: 2
GSM137-007F5REP3: RNCC: 5 | RNVC: 2
GSM137-07F5AVI0RB: RNCC: 5 | RNVC: 2
MAT137-0006F3REP3: RNCC: 5 | RNVC: 2

2 Jun 1976

5340-14-276-2968
Poker

142762968
NO PRIMARY REF14-276-2968: RNCC: 3 | RNVC: 2
BT38F0UGAPIQUEFEU: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-389-5497
Support Hook

143895497
365A87-3141-00: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-471-2261
Loop Clamp

144712261
F51AY0202-033: RNCC: 3 | RNVC: 2
F51AY0202-033: RNCC: 5 | RNVC: 9
F51AY0202-033: RNCC: 5 | RNVC: 9

8 Aug 1994

5340-14-377-7081
Loop Clamp

143777081
CR15-30: RNCC: 3 | RNVC: 2
Z00.N7141170030: RNCC: 5 | RNVC: 2
CR15-30: RNCC: 5 | RNVC: 9
Z00.N7141241455: RNCC: 5 | RNVC: 9

10 Jun 1982

5340-14-482-9181
Pipe Hanger

144829181
78732-016-039B: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-448-6205
Mounting Plate

144486205
8291-1365: RNCC: 3 | RNVC: 2
91557593: RNCC: 5 | RNVC: 2
91557593: RNCC: 5 | RNVC: 2
91557593: RNCC: 5 | RNVC: 2

4 Jul 1991

5340-14-324-7163
Loop Clamp

143247163
NO PRIMARY REF14-324-7163: RNCC: 3 | RNVC: 2
140: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-438-7733
Mounting Bracket

144387733
330A93-2034-21: RNCC: 3 | RNVC: 2

4 Apr 1990

5340-14-445-4657
Bow Handle

144454657
R262-44: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-337-6854
Rigid Caster

143376854
NO PRIMARY REF14-337-6854: RNCC: 3 | RNVC: 2
N508-3100BL: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-14-362-4856
Extension Shaft

143624856
D1553-4170: RNCC: 3 | RNVC: 2
D1553-4170: RNCC: 5 | RNVC: 2

19 Mar 1980

5340-14-336-9495
Bumper

143369495
S702-100-01: RNCC: 3 | RNVC: 2
S702-100-01: RNCC: 3 | RNVC: 9

7 Oct 1976

5340-14-513-4069
Lock-Release Lever

145134069
656-42816-00: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-14-373-2590
Pipe Hanger

143732590
R4A710-154: RNCC: 3 | RNVC: 2

21 Oct 1981

5340-14-382-1628
Runner

143821628
341A81-1721-20: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-446-1520
Swivel Caster

144461520
SP5-PA-160-47L-31: RNCC: 3 | RNVC: 2
91628992: RNCC: 5 | RNVC: 2

6 Mar 1991

5340-14-341-2231
Mending Plate

143412231
425-25821-000: RNCC: 3 | RNVC: 2
425-25821-000: RNCC: 5 | RNVC: 2

16 Mar 1977

5340-14-489-1562
Access Cover

144891562
23280720-7: RNCC: 3 | RNVC: 2

30 Jun 1997

5340-14-374-7498
Access Cover

143747498
409936-1: RNCC: 3 | RNVC: 2
409936-1: RNCC: 5 | RNVC: 2

30 Jan 1982

5340-14-463-5017
Clamping Catch

144635017
27137700-5: RNCC: 3 | RNVC: 2

17 Jun 1993

5340-14-578-7040
Utility Access Door

145787040
4 012 32: RNCC: 3 | RNVC: 2

19 Dec 2013

5340-14-419-7201
Access Cover

144197201
004882: RNCC: 3 | RNVC: 2
004860-5: RNCC: 5 | RNVC: 2
4882: RNCC: 5 | RNVC: 2

5 Nov 1987

5340-14-229-4883
Webbing Strap

142294883
70303: RNCC: 3 | RNVC: 2
AP6-1: RNCC: 5 | RNVC: 2
70303: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-334-8451
Retaining Strap

143348451
825-2-20-10: RNCC: 3 | RNVC: 2

2 Jun 1976

5340-14-355-3004
Rod End Clevis

143553004
7850094000: RNCC: 3 | RNVC: 2
3559-14: RNCC: 5 | RNVC: 2

19 Mar 1979

5340-14-202-9896
Expansion Plug

142029896
E29584A360AGT: RNCC: 2 | RNVC: 2
E29584-36A: RNCC: 3 | RNVC: 2
202382: RNCC: 5 | RNVC: 2
E29584-36A: RNCC: 5 | RNVC: 2
0024481361: RNCC: 5 | RNVC: 2
R93911-36A: RNCC: 5 | RNVC: 2
R93911A360AGT: RNCC: 5 | RNVC: 2
061212883: RNCC: 5 | RNVC: 9
32906900: RNCC: 5 | RNVC: 9
0024481361: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-14-416-9173
Rod End Clevis

144169173
F773-20912: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-043-1435
Handwheel

140431435
065U20-719768N: RNCC: 3 | RNVC: 2
0719768N00: RNCC: 5 | RNVC: 2

10 Apr 1984

5340-14-536-1390
Mounting Plate

145361390
4518-1009: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-287-7015
Retaining Strap

142877015
6111-1345: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-314-8479
Loop Clamp

143148479
NO PRIMARY REF14-314-8479: RNCC: 3 | RNVC: 2
20660381: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-539-4344
Bumper

145394344
457-13863-000: RNCC: 3 | RNVC: 2
457-13863-000: RNCC: 5 | RNVC: 2

14 Jan 2004

5340-14-483-9637
Cover Strip

144839637
366A25-0023-30: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-14-469-6830
Pipe Hanger

144696830
78733-020-033B: RNCC: 3 | RNVC: 2

4 May 1994

5340-14-420-7257
Mounting Plate

144207257
6261-01111: RNCC: 3 | RNVC: 2

16 Dec 1987

5340-14-514-4938
Bumper

145144938
IF-192-2527: RNCC: 3 | RNVC: 2
IF-192-2527: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-484-8186
Mounting Bracket

144848186
332P65-1763-20: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-441-4692
Protection Bellows

144414692
V6-976: RNCC: 3 | RNVC: 2
49223: RNCC: 5 | RNVC: 2

29 Aug 1990

5340-14-379-3532
Case Leg

143793532
10603-002: RNCC: 3 | RNVC: 2
10603-002: RNCC: 5 | RNVC: 2

1 Oct 1982

5340-14-415-6893
Cover Strip

144156893
CRP402-711-905: RNCC: 3 | RNVC: 2

18 May 1987

5340-14-258-5040
Angle Bracket

142585040
10283: RNCC: 3 | RNVC: 2
MQ-20A: RNCC: 6 | RNVC: 9

1 Jan 1969

5340-14-375-4544
Threaded Rod End

143754544
365A61-3310-20: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-458-1614
Bail Handle

144581614
20176541: RNCC: 3 | RNVC: 2
20176541: RNCC: 5 | RNVC: 9
85-692-3234: RNCC: 6 | RNVC: 9

8 Oct 1992

5340-14-314-8050
Case Leg

143148050
695169-22: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-354-1196
Angle Bracket

143541196
NO PRIMARY REF14-354-1196: RNCC: 3 | RNVC: 2
16052913: RNCC: 5 | RNVC: 2
16052913: RNCC: 5 | RNVC: 9
16052913: RNCC: 5 | RNVC: 9
16052913: RNCC: 5 | RNVC: 9

16 Jan 1979

5340-14-346-0749
Retaining Strap

143460749
1024-600010-230-0309-00: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-429-8108
Bow Handle

144298108
21312407-01: RNCC: 3 | RNVC: 2
85-693-6943: RNCC: 6 | RNVC: 9

13 Feb 1989

5340-14-433-6342
Mounting Bracket

144336342
6727-00001: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-228-7812
Bumper

142287812
NO PRIMARY REF14-228-7812: RNCC: 3 | RNVC: 2
STP14: RNCC: 5 | RNVC: 9
64919: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-539-4338
Bail Handle

145394338
457-12876-000: RNCC: 3 | RNVC: 2
457-12876-000: RNCC: 5 | RNVC: 2

14 Jan 2004

5340-14-440-1783
Door Hook

144401783
332A58-4585-00: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-522-6279
Rim Latch Set

145226279
C5-11-35: RNCC: 3 | RNVC: 2

8 Nov 2000

5340-14-541-4929
Surface Bolt

145414929
87.7.9212: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-211-5331
Loop Clamp

142115331
FL147088: RNCC: 3 | RNVC: 2
141088: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-349-3036
Spring Holder

143493036
155722: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-512-9688
Retaining Strap

145129688
0260123580: RNCC: 3 | RNVC: 2
AX15421: RNCC: 5 | RNVC: 2

24 Feb 1999

5340-14-266-1514
Bumper

142661514
C423243: RNCC: 3 | RNVC: 2
540276: RNCC: 5 | RNVC: 2
26423243: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-549-9341
Bumper

145499341
41106781: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-517-9050
Mounting Bracket

145179050
206937: RNCC: 3 | RNVC: 2

17 Jan 2000

5340-14-353-0471
Pipe Hanger

143530471
A11A221172250: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-523-0684
Mounting Plate

145230684
0856 308 W 00: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-14-534-7656
Mounting Bracket

145347656
704A41-1120-15: RNCC: 1 | RNVC: 2
022955-21: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-430-9451
Angle Bracket

144309451
G230062-03: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-14-303-9881
Control Rod

143039881
2078-80-15: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-389-5133
Angle Bracket

143895133
365A75-2393-20: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-527-9301
Loop Clamp

145279301
ASNA0021-25P8: RNCC: 1 | RNVC: 2
51111905028: RNCC: 3 | RNVC: 2
ASNA0021-25P8: RNCC: 3 | RNVC: 2
A0021-25P28: RNCC: 5 | RNVC: 2
A0021-25P8: RNCC: 5 | RNVC: 2
25P28: RNCC: 5 | RNVC: 2
A0021-25P28: RNCC: 5 | RNVC: 2

28 Nov 2001

5340-14-491-7673
Access Cover

144917673
NO PRIMARY REF14-491-7673: RNCC: 3 | RNVC: 2
120090-309: RNCC: 5 | RNVC: 9
F300 0T 004 1824: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-480-8671
Mounting Plate

144808671
410004: RNCC: 3 | RNVC: 2
410004-001: RNCC: 5 | RNVC: 9

4 Apr 1996

5340-14-508-7740
Access Cover

145087740
BS2842.127.00.000: RNCC: 3 | RNVC: 2
BS2842-127-00-000: RNCC: 5 | RNVC: 9

30 Sep 1998

5340-14-464-0758
Dashpot

144640758
22316855-3: RNCC: 3 | RNVC: 2
SG-SE017: RNCC: 5 | RNVC: 2

15 Jul 1993

5340-14-482-9414
Pipe Hanger

144829414
78733-046-035A: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-549-6132
Utility Access Door

145496132
CC201-615102-30: RNCC: 3 | RNVC: 2

21 Apr 2006

5340-14-440-4593
Quick Release Pin

144404593
90890-06163: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-501-5318
Access Cover

145015318
8529R5: RNCC: 3 | RNVC: 2
8529-R5: RNCC: 5 | RNVC: 2

3 Nov 1997

5340-14-323-3817
Control Rod

143233817
GSM173-018F19: RNCC: 3 | RNVC: 2
GSM173-18F19: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-401-3354
Mending Plate

144013354
NO PRIMARY REF14-401-3354: RNCC: 3 | RNVC: 2
20033689: RNCC: 5 | RNVC: 9

5 Jun 1985

5340-14-391-7824
Angle Bracket

143917824
78703-30-055A: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-533-3484
Utility Access Door

145333484
12-425-061G: RNCC: 3 | RNVC: 2
SZ12.425.061G: RNCC: 3 | RNVC: 2

31 Jan 2003

5340-14-405-6204
Rod End Clevis

144056204
0907-151-100A: RNCC: 3 | RNVC: 2

4 Dec 1985

5340-14-522-4674
Access Cover

145224674
C0R251-250-20-24: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-14-473-8624
Mounting Bracket

144738624
332A87-1191-01: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-438-7739
Mounting Plate

144387739
330A93-2035-22: RNCC: 3 | RNVC: 2

4 Apr 1990

5340-14-489-1991
Access Cover

144891991
2520149-913-32: RNCC: 3 | RNVC: 2

2 Jul 1997

5340-14-303-8342
Control Rod

143038342
NO PRIMARY REF14-303-8342: RNCC: 3 | RNVC: 2
19-150-120DETK: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-306-7663
Detent Plunger

143067663
301C0-0017F10: RNCC: 3 | RNVC: 2
301C0-017F10: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-396-1351
Access Cover

143961351
11-968-400: RNCC: 3 | RNVC: 2
11-968-400: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-547-0985
Mounting Plate

145470985
399-008-303-0: RNCC: 3 | RNVC: 2

22 Sep 2005

5340-14-385-6174
Rod End Clevis

143856174
RP23-11-01: RNCC: 3 | RNVC: 2
85-692-2937: RNCC: 6 | RNVC: 9

26 Jul 1983

5340-14-297-1387
Loop Clamp

142971387
MY20515-16810: RNCC: 3 | RNVC: 2
MY20-515-16-810: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-324-1105
Runner

143241105
211MA0022R1REP44-2: RNCC: 3 | RNVC: 2
211MA022R1REP44-2: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-513-4050
Lock-Release Lever

145134050
682-43641-00: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-14-443-1423
Mounting Bracket

144431423
DA2C228547780: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-14-370-3349
Retaining Clip

143703349
208-00340-00: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-438-5960
Angle Bracket

144385960
TB3030503: RNCC: 3 | RNVC: 2

28 Mar 1990

5340-14-385-1108
Loop Clamp

143851108
M04VW3021383821: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-390-1429
Bumper

143901429
366A27-3614-32: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-531-5992
Mounting Plate

145315992
3781N042: RNCC: 3 | RNVC: 2
3781N042: RNCC: 3 | RNVC: 2

3 Sep 2002

5340-14-375-8898
Expansion Plug

143758898
5000043193: RNCC: 3 | RNVC: 2
5000043193: RNCC: 5 | RNVC: 9
1402463: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-355-7732
Retaining Strap

143557732
050020: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-551-1997
Surface Bolt

145511997
75609210: RNCC: 3 | RNVC: 2
1001VD484: RNCC: 5 | RNVC: 2

6 Sep 2006

5340-14-553-1016
Mounting Plate

145531016
47243131AA: RNCC: 3 | RNVC: 2

1 Mar 2007

5340-14-532-5062
Clamping Catch

145325062
42-702-179: RNCC: 3 | RNVC: 2
SZ42.702.179: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-14-352-6747
Control Rod

143526747
0019551021: RNCC: 3 | RNVC: 2
0019551021: RNCC: 5 | RNVC: 9

14 Nov 1978

5340-14-531-4875
Swivel Caster

145314875
HP5BD125-23R: RNCC: 3 | RNVC: 2

21 Aug 2002

5340-14-336-2276
Butt Hinge

143362276
262-26-81103-01: RNCC: 3 | RNVC: 2
85-688-4640: RNCC: 6 | RNVC: 9

24 Jul 1976

5340-14-499-0701
Strap Fastener Loop

144990701
90109-040-425: RNCC: 3 | RNVC: 2
195001: RNCC: 5 | RNVC: 2
97109-040: RNCC: 5 | RNVC: 9
LR96104-040: RNCC: 5 | RNVC: 9
F300 0T 016 9252: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-268-9922
Handwheel

142689922
000MA1055F4REP1: RNCC: 3 | RNVC: 2
000MA0060F6-4C1: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-496-2835
Bow Handle

144962835
M8SD5-120: RNCC: 3 | RNVC: 2
F300 0T 021 3446: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-258-8171
Bow Handle

142588171
61408: RNCC: 3 | RNVC: 2
474682: RNCC: 5 | RNVC: 2
E940322W: RNCC: 5 | RNVC: 2
P04: RNCC: 5 | RNVC: 2
2922 500 05011: RNCC: 5 | RNVC: 2
2922-500-05011: RNCC: 5 | RNVC: 2
P04: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-376-0453
Access Cover

143760453
366A32-1131-00: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-264-1750
Loop Clamp

142641750
55217-340DB: RNCC: 3 | RNVC: 2
55217-340-000DB: RNCC: 5 | RNVC: 2
A0021-15N40: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-393-7898
Loop Clamp

143937898
SS1200-16-32: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-509-3469
Bow Handle

145093469
30828-225: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-451-3990
Mounting Bracket

144513990
10162011: RNCC: 3 | RNVC: 2
HL48-000113: RNCC: 5 | RNVC: 2

18 Nov 1991

5340-14-307-5943
Bumper

143075943
E4P524-50-873: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-305-6660
Angle Bracket

143056660
NO PRIMARY REF14-305-6660: RNCC: 3 | RNVC: 2
106-572: RNCC: 5 | RNVC: 9
106572: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-501-0679
Synchro Clamp

145010679
2028-13-05-52: RNCC: 3 | RNVC: 2
2028130552: RNCC: 5 | RNVC: 2
0940046703: RNCC: 5 | RNVC: 2
SDM0940046703: RNCC: 5 | RNVC: 9
SDM2028130552: RNCC: 5 | RNVC: 9
F300 0T 025 1016: RNCC: 6 | RNVC: 9
F300 0T 025 1302: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-312-1673
Retaining Strap

143121673
C65440: RNCC: 3 | RNVC: 2
C65440: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-351-5461
Rim Lock

143515461
67G: RNCC: 3 | RNVC: 9
A7297G: RNCC: 5 | RNVC: 2

12 Sep 1978

5340-14-359-6072
Bumper

143596072
573895191: RNCC: 3 | RNVC: 2

15 Oct 1979

5340-14-505-3835
Mounting Bracket

145053835
102150146: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-467-4327
Loop Clamp

144674327
NSA5516A19NS: RNCC: 3 | RNVC: 2
NSA5516A19NS: RNCC: 5 | RNVC: 2

12 Jan 1994

5340-14-544-5499
Flush Catch Claw

145445499
82088826000: RNCC: 3 | RNVC: 2

9 Feb 2005

5340-14-501-2436
Mounting Plate

145012436
486-005: RNCC: 3 | RNVC: 2
486.005: RNCC: 3 | RNVC: 2
F300 0T 025 2841: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-426-2833
Loop Clamp

144262833
SM112A-PPG-DPAS: RNCC: 3 | RNVC: 2

17 Aug 1988

5340-14-527-8106
Loop Clamp Kit

145278106
GT160MC-RED: RNCC: 3 | RNVC: 2
390-381: RNCC: 5 | RNVC: 2

21 Nov 2001

5340-14-466-1145
Snap Hook

144661145
REMDCHEGZLE-SERT-080044-6505: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-14-404-0173
Mounting Plate

144040173
355A34-1078-20: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-533-9025
Access Cover

145339025
08-875-070: RNCC: 3 | RNVC: 2
SZ08.875.070: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-448-5114
Protection Bellows

144485114
100-002/04-11-03: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-14-347-9249
Bumper

143479249
AZ437-1B: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-467-2844
Mounting Bracket

144672844
S30-901: RNCC: 3 | RNVC: 2
S30-901: RNCC: 5 | RNVC: 9
S30-901: RNCC: 5 | RNVC: 9
F300 0T 014 3844: RNCC: 6 | RNVC: 9

3 Jan 1994

5340-14-457-0368
Compression Cup

144570368
T40-22-88NBR101: RNCC: 3 | RNVC: 2
FRUT40-22-88NBR101: RNCC: 5 | RNVC: 9

4 Aug 1992

5340-14-385-3151
Retaining Strap

143853151
365A57-1188-20Z: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-552-7188
Mounting Bracket

145527188
252151857-00: RNCC: 3 | RNVC: 2

25 Jan 2007

5340-14-541-5230
Mounting Bracket

145415230
1091539-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-464-7626
Bumper

144647626
365A21-5122-24: RNCC: 3 | RNVC: 2

1 Sep 1993

5340-14-501-9370
Mounting Bracket

145019370
332A11-0474-00: RNCC: 3 | RNVC: 2

19 Nov 1997

5340-14-418-0439
Angle Bracket

144180439
6114-30021: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-454-4432
Loop Clamp

144544432
TB30-67086-101: RNCC: 3 | RNVC: 2

2 Apr 1992

5340-14-337-9427
Mending Plate

143379427
0294800170: RNCC: 3 | RNVC: 2
302-272-901P: RNCC: 5 | RNVC: 2

6 Nov 1976

5340-14-368-3203
Mounting Plate

143683203
X12263-58: RNCC: 3 | RNVC: 2
1170289: RNCC: 5 | RNVC: 2
1170289: RNCC: 5 | RNVC: 2

20 Feb 1981

5340-14-388-3451
Bumper

143883451
360A21-2121-00: RNCC: 3 | RNVC: 2

3 Nov 1983

5340-14-471-7543
Mounting Bracket

144717543
ST159-2M811-51P6: RNCC: 3 | RNVC: 2
4201377P006: RNCC: 5 | RNVC: 2

14 Sep 1994

5340-14-465-2863
Mounting Plate

144652863
365A66-2070-34: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-410-7461
Mounting Plate

144107461
A02358-03-1000P018: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-226-0436
Mending Plate

142260436
NO PRIMARY REF14-226-0436: RNCC: 3 | RNVC: 2
AE130661: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-469-2193
Retaining Band

144692193
CA2031-1: RNCC: 3 | RNVC: 2
85-695-2873: RNCC: 6 | RNVC: 9

13 Apr 1994

5340-14-542-0235
Bow Handle

145420235
20049-750: RNCC: 3 | RNVC: 2
502118006011A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-453-6498
Metal Grille

144536498
360-81-226: RNCC: 3 | RNVC: 9
89138514: RNCC: 5 | RNVC: 2

4 Mar 1992

5340-14-496-3616
Mounting Plate

144963616
5010113939: RNCC: 3 | RNVC: 2
F300 0T 021 4463: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-423-3669
Butt Hinge

144233669
160G742065: RNCC: 3 | RNVC: 2

14 Apr 1988

5340-14-566-2307
Utility Resilient Mount

145662307
539608: RNCC: 3 | RNVC: 2

28 Oct 2010

5340-14-424-2268
Expansion Plug

144242268
7703075039: RNCC: 3 | RNVC: 2
7703075039: RNCC: 3 | RNVC: 2

19 May 1988

5340-14-547-9227
Blank Panel

145479227
GZ4326Y02: RNCC: 3 | RNVC: 2

25 Nov 2005

5340-14-445-9897
Expansion Plug

144459897
R93910A550GAT: RNCC: 2 | RNVC: 2

4 Mar 1991

5340-14-551-3511
Angle Bracket

145513511
RA1M705956331N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-458-2614
Loop Clamp

144582614
4281312020: RNCC: 3 | RNVC: 2
B28DG20: RNCC: 5 | RNVC: 2

15 Oct 1992

5340-14-428-5474
Suction Cup

144285474
02932N: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-551-7594
Mounting Bracket

145517594
RA1A702506005: RNCC: 3 | RNVC: 2

20 Oct 2006

5340-14-482-6781
Mounting Bracket

144826781
47028358: RNCC: 3 | RNVC: 2

18 Jul 1996

5340-14-438-4097
Rim Lock

144384097
24480: RNCC: 3 | RNVC: 2
57378: RNCC: 5 | RNVC: 2
5516003963: RNCC: 5 | RNVC: 2

21 Mar 1990

5340-14-455-7794
Retaining Strap

144557794
0000148675: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-272-9232
Loop Clamp

142729232
70889123: RNCC: 3 | RNVC: 2
70889123: RNCC: 5 | RNVC: 9
889123: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-478-9051
Pawl Fastener

144789051
45488014: RNCC: 3 | RNVC: 2
45488014: RNCC: 5 | RNVC: 2
45488014: RNCC: 5 | RNVC: 9

30 Nov 1995

5340-14-405-0491
Loop Clamp

144050491
C0125: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-388-9899
Handwheel

143889899
RFF56881DN80REP14: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-549-4270
Utility Access Door

145494270
P526924: RNCC: 3 | RNVC: 2

3 Apr 2006

5340-14-457-6196
Block Clamp

144576196
PM1A741394010: RNCC: 3 | RNVC: 2
PM1A741394010: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-551-2545
Angle Bracket

145512545
RA1B702606371N1: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-535-4215
Mounting Bracket

145354215
5430062891: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-494-4357
Mounting Bracket

144944357
K51 623 50: RNCC: 3 | RNVC: 2
F300 0T 017 3286: RNCC: 6 | RNVC: 9

15 Oct 1997

Load More Results