What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 141 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 141 of 446

5340-14-435-1044
Angle Bracket

144351044
3005261: RNCC: 3 | RNVC: 2

18 Oct 1989

5340-14-436-6310
Rod End Clevis

144366310
DA2C202448521: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-384-6615
Access Cover

143846615
16761604: RNCC: 3 | RNVC: 2
16761604: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-372-6949
Access Cover

143726949
24632-57: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-524-3729
Locking Stay

145243729
408252: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-230-6324
Rod End Clevis

142306324
STJ156349: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-402-5002
Rod End Clevis

144025002
FE27X200: RNCC: 3 | RNVC: 9
17860GN: RNCC: 5 | RNVC: 9

3 Jul 1985

5340-14-311-4370
Retaining Strap

143114370
C57-58000: RNCC: 3 | RNVC: 2
C57-58000: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-347-4422
Retaining Strap

143474422
0274603040: RNCC: 3 | RNVC: 2
302-134-701P: RNCC: 5 | RNVC: 2

1 Mar 1978

5340-14-280-5602
Mounting Plate

142805602
NO PRIMARY REF14-280-5602: RNCC: 3 | RNVC: 2
39975: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-363-0331
Butt Hinge

143630331
CP302060-40-410: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-14-302-4756
Angle Bracket

143024756
319A69-10-070: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-473-8409
Mounting Bracket

144738409
332A72-1376-00: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-324-7204
Handwheel

143247204
GSM137-001FF13DET5-8C4: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-402-6286
Rod End Connector

144026286
401130: RNCC: 3 | RNVC: 2
BGE401130: RNCC: 5 | RNVC: 2

19 Jul 1985

5340-14-394-2290
Control Rod

143942290
AS510-03A: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-526-0734
Arched Cushion

145260734
MAT169-0024F4BLEUE: RNCC: 3 | RNVC: 2
E1M-3699-20: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-14-542-5232
Loop Holder

145425232
2594-01: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-14-389-8828
Bail Handle

143898828
PRP.313-ZI: RNCC: 3 | RNVC: 2
PRP313ZI: RNCC: 5 | RNVC: 2
M4ZS420D2096: RNCC: 5 | RNVC: 2

26 Jan 1984

5340-14-439-8665
Rod Retainer Clip

144398665
204/00013/00: RNCC: 3 | RNVC: 2
902.89.03.25: RNCC: 5 | RNVC: 2

29 May 1990

5340-14-257-9251
Angle Bracket

142579251
NO PRIMARY REF14-257-9251: RNCC: 3 | RNVC: 2
642023A: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-363-5275
Loop Clamp

143635275
Z650403024: RNCC: 3 | RNVC: 2
9560117630: RNCC: 5 | RNVC: 2
71012-10: RNCC: 5 | RNVC: 9
65040300400: RNCC: 5 | RNVC: 9
71012-10: RNCC: 5 | RNVC: 9
85-691-1304: RNCC: 6 | RNVC: 9

9 May 1980

5340-14-428-4669
Rod End Clevis

144284669
201-135CZ1F: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-384-0860
Access Cover

143840860
NO PRIMARY REF14-384-0860: RNCC: 3 | RNVC: 2
709897: RNCC: 5 | RNVC: 9

4 May 1983

5340-14-296-1230
Angle Bracket

142961230
341A23-1020-23: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-355-2967
Access Cover

143552967
217443: RNCC: 3 | RNVC: 2
20-0583: RNCC: 5 | RNVC: 2

19 Mar 1979

5340-14-339-4070
Loop Clamp

143394070
M3E700-30-932: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-418-4829
Leaf Spring

144184829
L80G244LD300EP8: RNCC: 3 | RNVC: 2
R80G244LD300EP8: RNCC: 5 | RNVC: 2
1105-171: RNCC: 5 | RNVC: 2
L80G244-15: RNCC: 5 | RNVC: 2

26 Aug 1987

5340-14-265-1363
Loop Clamp

142651363
55218-306B316ADL: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-508-7738
Mounting Plate

145087738
BS2842.00.00.129: RNCC: 3 | RNVC: 2
BS2842-00-00-129: RNCC: 5 | RNVC: 9

30 Sep 1998

5340-14-327-6533
Rod End Clevis

143276533
A74832: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-500-3544
Control Rod

145003544
E61401000003: RNCC: 3 | RNVC: 2
F300 0T 024 3635: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-471-7788
Anchor Strap

144717788
P02737: RNCC: 3 | RNVC: 2

14 Sep 1994

5340-14-392-1211
Locking Stay

143921211
22096262: RNCC: 3 | RNVC: 2
22096262: RNCC: 5 | RNVC: 9

21 Mar 1984

5340-14-408-6539
Rod End Clevis

144086539
160G202048: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-483-5497
Plug Button

144835497
46087200: RNCC: 3 | RNVC: 2

19 Sep 1996

5340-14-507-9931
Webbing Strap

145079931
4773124410: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-483-4378
Anchor Strap

144834378
F125422: RNCC: 3 | RNVC: 2

12 Sep 1996

5340-14-500-5189
Mounting Plate

145005189
30424: RNCC: 3 | RNVC: 2
F300 0T 024 5362: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-526-2552
Access Cover

145262552
10627663: RNCC: 3 | RNVC: 2

11 Jul 2001

5340-14-522-7772
Access Cover

145227772
46179618: RNCC: 3 | RNVC: 2

22 Nov 2000

5340-14-450-6521
Loop Clamp

144506521
51313105026: RNCC: 3 | RNVC: 2
HB21G26: RNCC: 5 | RNVC: 2
91420858: RNCC: 5 | RNVC: 2

16 Oct 1991

5340-14-278-4541
Angle Bracket

142784541
12504814: RNCC: 3 | RNVC: 2
12504814: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-365-2567
Synchro Clamp

143652567
4036509: RNCC: 3 | RNVC: 2
SY3623: RNCC: 5 | RNVC: 2
4036509: RNCC: 5 | RNVC: 9
SY3623: RNCC: 5 | RNVC: 9

19 Sep 1980

5340-14-394-9683
Retaining Strap

143949683
20320808: RNCC: 3 | RNVC: 2
20320808: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-269-9188
Runner

142699188
8356057: RNCC: 3 | RNVC: 2
8356057: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-551-2832
Mounting Bracket

145512832
RA1M705156141N1: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-554-8859
Loop Clamp

145548859
78651CT12CF: RNCC: 1 | RNVC: 2
78651CT12CF: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-449-1158
Loop Clamp

144491158
51120605045: RNCC: 3 | RNVC: 2
24FE45: RNCC: 5 | RNVC: 2

30 Jul 1991

5340-14-401-2596
Bumper

144012596
224862: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-454-8873
Bow Handle

144548873
5000418356: RNCC: 3 | RNVC: 2

24 Apr 1992

5340-14-544-5280
Retaining Strap

145445280
21205980: RNCC: 3 | RNVC: 2

8 Feb 2005

5340-14-413-9610
Retaining Strap

144139610
ST400S60P125: RNCC: 3 | RNVC: 2
BJQS60P125: RNCC: 5 | RNVC: 2

22 Jan 1987

5340-14-545-4446
Angle Bracket

145454446
RA1B701776191A2N1: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-482-9690
Pipe Hanger

144829690
PM1A726164050: RNCC: 3 | RNVC: 2
PM1A726164050: RNCC: 5 | RNVC: 2

1 Aug 1996

5340-14-506-3072
Access Cover

145063072
10337959: RNCC: 3 | RNVC: 2

22 Apr 1998

5340-14-369-9450
Retaining Strap

143699450
398003010400: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-368-4113
Loop Clamp

143684113
511119050091: RNCC: 3 | RNVC: 2
35P9: RNCC: 5 | RNVC: 2

20 Feb 1981

5340-14-545-7593
Mounting Plate

145457593
212789: RNCC: 3 | RNVC: 2

10 May 2005

5340-14-415-6418
Clamping Catch

144156418
20856040: RNCC: 3 | RNVC: 2
20856040: RNCC: 3 | RNVC: 9

18 May 1987

5340-14-504-5381
Recess Handle

145045381
F10A211200047: RNCC: 3 | RNVC: 2

18 Feb 1998

5340-14-378-0598
Mounting Plate

143780598
BAZ93798: RNCC: 3 | RNVC: 2

20 Jul 1982

5340-14-525-0286
Swivel Caster

145250286
234050L: RNCC: 3 | RNVC: 2

16 May 2001

5340-14-544-9862
Mounting Bracket

145449862
V000845: RNCC: 3 | RNVC: 2
H000686: RNCC: 5 | RNVC: 2

10 Mar 2005

5340-14-441-1036
Mounting Plate

144411036
16766490: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-522-3943
Shimmy Damper

145223943
173059: RNCC: 3 | RNVC: 2
Y173059: RNCC: 5 | RNVC: 2

25 Oct 2000

5340-14-351-2049
Angle Bracket

143512049
211090: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-509-6878
Loop Clamp

145096878
RA1M216400123: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-386-5594
Angle Bracket

143865594
18312: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-328-7628
Retaining Strap

143287628
A68399: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-524-5270
Mounting Plate

145245270
0CV194120907: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-498-4718
Mounting Bracket

144984718
091A02-558118Q: RNCC: 3 | RNVC: 2
91968538: RNCC: 3 | RNVC: 2
F300 0T 005 1939: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-549-9773
Mounting Bracket

145499773
F1263135: RNCC: 3 | RNVC: 2

22 May 2006

5340-14-534-2510
Mounting Plate

145342510
8036899R00: RNCC: 3 | RNVC: 2

19 Mar 2003

5340-14-472-3236
Shelf Bracket

144723236
DHV1258: RNCC: 3 | RNVC: 2

19 Oct 1994

5340-14-224-4197
Angle Bracket

142244197
4070-461A211: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-536-1368
Mounting Bracket

145361368
4518-6202: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-460-3154
Mounting Bracket

144603154
45215554: RNCC: 3 | RNVC: 2
45215554: RNCC: 5 | RNVC: 9

21 Jan 1993

5340-14-509-6539
Cover Strip

145096539
RA1M126090031: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-521-5336
Loop Clamp

145215336
230308408: RNCC: 3 | RNVC: 2
8TX100DP84: RNCC: 5 | RNVC: 2

9 Aug 2000

5340-14-394-6440
Mounting Plate

143946440
79110167: RNCC: 3 | RNVC: 2
79110167: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-465-2741
Mounting Bracket

144652741
365A08-4320-7751: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-546-9683
Angle Bracket

145469683
RB1B701476691: RNCC: 3 | RNVC: 2

12 Sep 2005

5340-14-508-7200
Loop Clamp

145087200
240321618: RNCC: 3 | RNVC: 2
18AX200DP216: RNCC: 5 | RNVC: 2

29 Sep 1998

5340-14-505-3806
Pipe Hanger

145053806
10214034: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-545-9586
Mounting Bracket

145459586
56291653: RNCC: 3 | RNVC: 2

30 May 2005

5340-14-449-3216
Clamp Bolt Assembly

144493216
571A207: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-381-4021
Angle Bracket

143814021
234054: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-524-0424
Mounting Bracket

145240424
GFACA82: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-14-308-1168
Loop Clamp

143081168
01AT290: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-436-6840
Loop Clamp

144366840
DA2C796000110: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-276-4177
Retaining Strap

142764177
12509223: RNCC: 3 | RNVC: 2
12509223: RNCC: 3 | RNVC: 9

1 Jan 1971

5340-14-545-5528
Webbing Strap

145455528
16037: RNCC: 3 | RNVC: 2

19 Apr 2005

5340-14-521-3474
Mounting Bracket

145213474
46520237: RNCC: 3 | RNVC: 9

20 Jul 2000

5340-14-347-2205
Butt Hinge

143472205
50-80CHR0ME: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-14-441-0057
Mounting Plate

144410057
400-4-013874: RNCC: 3 | RNVC: 2

9 Aug 1990

5340-14-514-9965
Mounting Plate

145149965
SA/CS31/5: RNCC: 3 | RNVC: 2

25 Jun 1999

5340-14-535-6613
Mounting Bracket

145356613
1926-100-010B: RNCC: 3 | RNVC: 2

13 Jun 2003

5340-14-379-3463
Shimmy Damper

143793463
NO PRIMARY REF14-379-3463: RNCC: 3 | RNVC: 2
345-61331-0: RNCC: 5 | RNVC: 9
345613310: RNCC: 5 | RNVC: 9

1 Oct 1982

5340-14-395-4623
Bow Handle

143954623
161-10450-210: RNCC: 3 | RNVC: 2
161-10450G: RNCC: 5 | RNVC: 2
704A31-610-007: RNCC: 5 | RNVC: 2
161-10450-21: RNCC: 5 | RNVC: 2
161-10450-G: RNCC: 5 | RNVC: 2

30 Oct 1984

5340-14-546-5380
Swivel Caster

145465380
VP5BD200-21B: RNCC: 3 | RNVC: 2

18 Jul 2005

5340-14-513-9227
Access Cover

145139227
1347-241D382: RNCC: 3 | RNVC: 2

19 Apr 1999

5340-14-493-7694
Access Cover

144937694
BLC234447: RNCC: 3 | RNVC: 2
F300 0T 013 9733: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-546-6068
Access Cover

145466068
RPL741330051B1: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-14-485-2802
Rod End Clevis

144852802
RP1A721626103: RNCC: 3 | RNVC: 2

15 Jan 1997

5340-14-361-7276
Locking Stay

143617276
0603591500: RNCC: 3 | RNVC: 2
0603591500: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-14-539-9975
Bridge Clamp

145399975
V2PM3269-118462: RNCC: 3 | RNVC: 2
V2PM3269-118462: RNCC: 5 | RNVC: 2

25 Feb 2004

5340-14-443-5557
Mounting Plate

144435557
CAP230-70-11-04A: RNCC: 3 | RNVC: 9

28 Nov 1990

5340-14-413-7643
Loop Clamp

144137643
A0021-21S21: RNCC: 1 | RNVC: 2
A0021-21S21: RNCC: 3 | RNVC: 2

15 Jan 1987

5340-14-462-5727
Mounting Plate

144625727
GA70546-7: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-14-475-0906
Retaining Strap

144750906
20229409: RNCC: 3 | RNVC: 2
85-695-1590: RNCC: 6 | RNVC: 9

16 Mar 1995

5340-14-266-9416
Bumper

142669416
TR8053-2: RNCC: 3 | RNVC: 2
38242028A4: RNCC: 3 | RNVC: 2
1MSSB281: RNCC: 5 | RNVC: 2
1MSSB281: RNCC: 5 | RNVC: 9
38242028A4: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-404-0456
Angle Bracket

144040456
366A52-1124-00: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-508-5355
Access Cover

145085355
FH152009010: RNCC: 3 | RNVC: 2
FH152009000: RNCC: 3 | RNVC: 9

16 Sep 1998

5340-14-524-1847
Butt Hinge

145241847
C6-8: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-454-0650
Access Cover

144540650
16292073: RNCC: 3 | RNVC: 2
16292073: RNCC: 5 | RNVC: 9

19 Mar 1992

5340-14-555-6921
Clamp Bolt Assembly

145556921
H-C-10203: RNCC: 3 | RNVC: 2

7 Dec 2007

5340-14-496-6304
Access Cover

144966304
50000309: RNCC: 3 | RNVC: 2
F300 0T 021 8202: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-540-2027
Access Cover

145402027
9603670480: RNCC: 3 | RNVC: 2

11 Mar 2004

5340-14-504-8275
Access Cover

145048275
8816678000: RNCC: 3 | RNVC: 2

4 Mar 1998

5340-14-287-1752
Access Hole Frame

142871752
12505729: RNCC: 3 | RNVC: 2
12505729: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-548-8392
Mounting Bracket

145488392
0298707120: RNCC: 3 | RNVC: 2

16 Feb 2006

5340-14-418-3320
Access Cover

144183320
4-453720: RNCC: 3 | RNVC: 9
4-453720: RNCC: 5 | RNVC: 2
4-453720: RNCC: 5 | RNVC: 9

12 Aug 1987

5340-14-437-4373
Retaining Strap

144374373
20110985: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-479-7577
Arched Cushion

144797577
NPAN2S0020BF14DE38: RNCC: 3 | RNVC: 2

5 Feb 1996

5340-14-379-3877
Lock-Release Lever

143793877
NO PRIMARY REF14-379-3877: RNCC: 3 | RNVC: 2
345-66311-0: RNCC: 5 | RNVC: 9
345663110: RNCC: 5 | RNVC: 9

1 Oct 1982

5340-14-246-0596
Bumper

142460596
NO PRIMARY REF14-246-0596: RNCC: 3 | RNVC: 2
13190-33: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-405-2883
Mounting Plate

144052883
526695000: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-409-0625
Access Cover

144090625
1.68.696.76: RNCC: 3 | RNVC: 2
16869676: RNCC: 5 | RNVC: 2

16 Apr 1986

5340-14-401-8176
Loop Clamp

144018176
201271-0472S: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-332-1232
Access Cover

143321232
413-07144-000: RNCC: 3 | RNVC: 2
413-7144: RNCC: 5 | RNVC: 2
413-07144-000: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-409-8001
Rod End Clevis

144098001
M397-02-10-58-32: RNCC: 3 | RNVC: 2
453-80342-000: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-506-2515
Cover Strip

145062515
332A22-0125-54: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-14-378-4150
Pipe Hanger

143784150
366A68-1364-20: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-414-5703
Webbing Strap

144145703
ST400S11P12-16: RNCC: 3 | RNVC: 2

11 Feb 1987

5340-14-533-2971
Mounting Bracket

145332971
SZ12.725.199: RNCC: 3 | RNVC: 2
12-725-199: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-544-3844
Mounting Bracket

145443844
355P65-7988-21: RNCC: 3 | RNVC: 2

26 Jan 2005

5340-14-480-7570
Loop Clamp

144807570
452-12044-100: RNCC: 3 | RNVC: 2
452-12044-100: RNCC: 5 | RNVC: 2

28 Mar 1996

5340-14-368-3325
Angle Bracket

143683325
NO PRIMARY REF14-368-3325: RNCC: 3 | RNVC: 2
90-23-032: RNCC: 5 | RNVC: 9
9023032: RNCC: 5 | RNVC: 9

20 Feb 1981

5340-14-383-5992
Rod End Clevis

143835992
TB30-27233-100: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-474-1021
Mending Plate

144741021
F7987 5132-91: RNCC: 3 | RNVC: 9

25 Jan 1995

5340-14-477-7353
Angle Bracket

144777353
1405-121-120A: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-14-511-3578
Section Block Clamp

145113578
F701-29-02: RNCC: 3 | RNVC: 2

16 Dec 1998

5340-14-368-6658
Bow Handle

143686658
11-729-600: RNCC: 3 | RNVC: 2
AZ17296: RNCC: 5 | RNVC: 9
11-729-600: RNCC: 5 | RNVC: 9

20 Feb 1981

5340-14-452-1216
Loop Clamp

144521216
RSGU1-32-15W1: RNCC: 3 | RNVC: 2
RSGU1-32-15W1: RNCC: 5 | RNVC: 2
91639642: RNCC: 5 | RNVC: 2

18 Dec 1991

5340-14-307-4452
Angle Bracket

143074452
NO PRIMARY REF14-307-4452: RNCC: 3 | RNVC: 2
542-03-55: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-204-8786
Loop Clamp

142048786
511153050251: RNCC: 3 | RNVC: 2
35S25: RNCC: 5 | RNVC: 2
BR791-25: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-14-447-5455
Loop Clamp

144475455
D3-830INOX: RNCC: 3 | RNVC: 2
77704710R: RNCC: 5 | RNVC: 2

29 May 1991

5340-14-495-3146
Webbing Strap

144953146
121E736-00: RNCC: 3 | RNVC: 2
121E736-00: RNCC: 5 | RNVC: 9
F300 0T 019 0155: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-452-2814
Bumper

144522814
365A24-1200-22: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-472-8882
Angle Bracket

144728882
332A63-4305-20: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-348-2994
Mending Plate

143482994
910SP1-0038: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-372-9346
Runner

143729346
NO PRIMARY REF14-372-9346: RNCC: 3 | RNVC: 2
323214: RNCC: 5 | RNVC: 9

21 Sep 1981

5340-14-375-7773
Corner Brace

143757773
341A65-5067-20: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-470-1607
Mounting Bracket

144701607
332A67-3894-20: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-14-451-0192
Loop Clamp

144510192
1523858: RNCC: 3 | RNVC: 2
10-690020: RNCC: 5 | RNVC: 2

28 Oct 1991

5340-14-365-4495
Angle Bracket

143654495
4070-180A052: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-312-0214
Angle Bracket

143120214
26250924: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-374-4946
Angle Bracket

143744946
A21A221176211: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-536-7330
Section Block Clamp

145367330
GC52299Y00: RNCC: 3 | RNVC: 2

15 Sep 2003

5340-14-479-1212
Mounting Plate

144791212
LA01PD030011: RNCC: 3 | RNVC: 9
LA01PD030011: RNCC: 5 | RNVC: 2

13 Dec 1995

5340-14-517-0789
Mounting Plate

145170789
MP1786F03: RNCC: 3 | RNVC: 2

3 Nov 1999

5340-14-459-1644
Mounting Bracket

144591644
45215134: RNCC: 3 | RNVC: 2
45215134: RNCC: 5 | RNVC: 9

19 Nov 1992

5340-14-367-6270
Mounting Plate

143676270
18A1111: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-470-4062
Door Hook

144704062
0390750130: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-522-1111
Angle Bracket Set

145221111
3195068: RNCC: 3 | RNVC: 2
3195068: RNCC: 5 | RNVC: 2

4 Oct 2000

5340-14-459-4700
Mounting Plate

144594700
A68388: RNCC: 3 | RNVC: 2

8 Dec 1992

5340-14-501-9645
Compression Cup

145019645
710212: RNCC: 3 | RNVC: 2
710212: RNCC: 5 | RNVC: 9

19 Nov 1997

5340-14-514-1102
Loop Clamp

145141102
51213103008: RNCC: 3 | RNVC: 2
5000497308: RNCC: 5 | RNVC: 2

26 Apr 1999

5340-14-375-1853
Rim Latch

143751853
16343361: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-549-4015
Magnetic Base

145494015
1002446: RNCC: 3 | RNVC: 2

30 Mar 2006

5340-14-379-3202
Angle Bracket

143793202
A11A221176511: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-551-8798
Mounting Bracket

145518798
43043186: RNCC: 3 | RNVC: 2
43043186: RNCC: 3 | RNVC: 9

6 Nov 2006

5340-14-565-9028
Utility Access Door

145659028
MDS43A004: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-14-485-5622
Door Handle

144855622
15230247PAN: RNCC: 3 | RNVC: 2

29 Jan 1997

5340-14-435-5124
Cover Strip

144355124
DA1D230324100A1: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-506-7332
Angle Bracket

145067332
BB4056: RNCC: 3 | RNVC: 2

13 May 1998

5340-14-507-6871
Mounting Plate

145076871
10469302: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-413-1722
Angle Bracket

144131722
132275: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-490-2900
Loop Clamp

144902900
RSGU1100-2X12-15: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-463-0121
Bow Handle

144630121
IF164-914: RNCC: 3 | RNVC: 9

12 May 1993

5340-14-372-1096
Bumper

143721096
NO PRIMARY REF14-372-1096: RNCC: 3 | RNVC: 2
99340958009: RNCC: 5 | RNVC: 9
40516000: RNCC: 5 | RNVC: 9

1 Sep 1981

5340-14-506-2963
Angle Bracket

145062963
38511800: RNCC: 3 | RNVC: 2
38511800: RNCC: 5 | RNVC: 9

22 Apr 1998

5340-14-515-0524
Runner

145150524
464694: RNCC: 3 | RNVC: 2
464694-001: RNCC: 5 | RNVC: 9

30 Jun 1999

5340-14-517-3990
Mounting Plate

145173990
90400016501: RNCC: 3 | RNVC: 2
SDM90400016501: RNCC: 5 | RNVC: 9

8 Dec 1999

5340-14-528-7230
Pawl Fastener

145287230
1MP50133106: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-14-348-0100
Anchor Strap

143480100
21682-2: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-042-9526
Angle Bracket

140429526
A21B221160282: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-455-9062
Cover Strip

144559062
PM1A726266301: RNCC: 3 | RNVC: 2
PM1A726266301: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-554-6215
Loop Clamp

145546215
PC 0609: RNCC: 3 | RNVC: 2
472-6403: RNCC: 5 | RNVC: 2

26 Jul 2007

5340-14-409-8169
Quick Release Pin

144098169
529600: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-228-0676
Access Cover

142280676
0091170060: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-347-0864
Plug Button

143470864
MD043177: RNCC: 3 | RNVC: 9

19 Jan 1978

5340-14-355-3213
Buckle

143553213
401BC: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-512-8375
Mounting Bracket

145128375
214248: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-534-8537
Mounting Plate

145348537
10621620: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-14-446-4469
Handwheel

144464469
D0279REP09: RNCC: 3 | RNVC: 2
D0279REP09: RNCC: 5 | RNVC: 2

20 Mar 1991

5340-14-255-4253
Mounting Bracket

142554253
321A37-9709-00: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-362-4402
Pipe Hanger

143624402
105661-03: RNCC: 3 | RNVC: 2
C105661-03: RNCC: 5 | RNVC: 2
105661-03: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-525-3186
Loop Clamp

145253186
332A91-8135-11: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-362-7467
Angle Bracket

143627467
684-3008-200-02: RNCC: 3 | RNVC: 2
684-3008-200-02: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-508-7710
Access Cover

145087710
BS2842.133.00.000: RNCC: 3 | RNVC: 2
BS2842-133-00-000: RNCC: 5 | RNVC: 9

30 Sep 1998

5340-14-277-8573
Cover Strip

142778573
3160S25-11-015-51: RNCC: 3 | RNVC: 2
3160S25-11-015RU: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-508-5286
Loop Clamp

145085286
10496219: RNCC: 3 | RNVC: 2

16 Sep 1998

5340-14-537-7482
Mounting Plate

145377482
330E61-1224-00: RNCC: 3 | RNVC: 2

19 Nov 2003

5340-14-405-3945
Angle Bracket

144053945
0308850670: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-405-3363
Angle Bracket

144053363
005982005P: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-332-8637
Access Cover

143328637
T20-13H301: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-424-1842
Access Cover

144241842
4-452802: RNCC: 3 | RNVC: 9
4401722: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-511-5677
Loop Clamp

145115677
213103200: RNCC: 3 | RNVC: 2
A0021-21G32: RNCC: 5 | RNVC: 2
ASNA0021-21G32: RNCC: 5 | RNVC: 2
ASNA0021-21G32: RNCC: 5 | RNVC: 2

6 Jan 1999

5340-14-300-7052
Angle Bracket

143007052
42398A: RNCC: 3 | RNVC: 2
42398: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-292-4553
Retaining Strap

142924553
341A62-1179-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-273-2622
Suction Cup

142732622
1310-6-160: RNCC: 3 | RNVC: 2
1310-6-160: RNCC: 5 | RNVC: 2
1310-6-160: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-314-3877
Access Cover

143143877
CH36-4: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-470-9716
Synchro Clamp

144709716
57309-902-1: RNCC: 3 | RNVC: 2
57309-902-1: RNCC: 5 | RNVC: 9

20 Jul 1994

5340-14-522-1535
Synchro Clamp

145221535
AV50810000: RNCC: 3 | RNVC: 2
91327903: RNCC: 5 | RNVC: 2

4 Oct 2000

5340-14-349-9193
Rod End Clevis

143499193
6511-05383: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-462-3770
Mounting Plate

144623770
1776B902-01: RNCC: 3 | RNVC: 2
89467756: RNCC: 5 | RNVC: 2

15 Apr 1993

5340-14-344-7868
Retaining Strap

143447868
55214-036ACL: RNCC: 1 | RNVC: 2
Y55214036ACL: RNCC: 3 | RNVC: 2
55214-036ACL: RNCC: 3 | RNVC: 2
55214-36ACL: RNCC: 5 | RNVC: 9
85-800-3926: RNCC: 6 | RNVC: 9

9 Sep 1977

5340-14-390-8656
Retaining Strap

143908656
ST159-2M781P51: RNCC: 3 | RNVC: 2
ST159-2M781P51A: RNCC: 5 | RNVC: 2

1 Mar 1984

5340-14-549-6245
Runner

145496245
JCB 10 135-810: RNCC: 3 | RNVC: 2

24 Apr 2006

5340-14-413-9252
Anchor Strap

144139252
5249: RNCC: 3 | RNVC: 2
86-5249: RNCC: 5 | RNVC: 2

22 Jan 1987

5340-14-486-0437
Detent Plunger

144860437
429749: RNCC: 3 | RNVC: 2
429749-001: RNCC: 5 | RNVC: 9

26 Feb 1997

5340-14-407-1347
Mounting Plate

144071347
02/C14042100: RNCC: 3 | RNVC: 2
C14042100: RNCC: 5 | RNVC: 2

11 Feb 1986

5340-14-542-1273
Retaining Band

145421273
5302835-20: RNCC: 3 | RNVC: 2

7 Jul 2004

5340-14-549-8602
Mounting Bracket

145498602
2092409-001: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-227-8942
Webbing Strap

142278942
NO PRIMARY REF14-227-8942: RNCC: 3 | RNVC: 2
61499-003: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-443-5433
Mounting Bracket

144435433
CAP230-50-64-00A: RNCC: 3 | RNVC: 9

28 Nov 1990

5340-14-541-5222
Mounting Plate

145415222
1091531-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-470-8384
Access Cover

144708384
C31CH0012-116: RNCC: 3 | RNVC: 2
C31CH0012-116: RNCC: 5 | RNVC: 2
C31CH0012-116: RNCC: 5 | RNVC: 9

8 Jul 1994

5340-14-413-7635
Loop Clamp

144137635
A0021-21FE08: RNCC: 3 | RNVC: 2

15 Jan 1987

5340-14-373-5457
Rod End Clevis

143735457
330A31-3181-20: RNCC: 3 | RNVC: 2

21 Oct 1981

5340-14-302-5560
Pipe Hanger

143025560
330A61-3405-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-356-0670
Retaining Strap

143560670
EA1M701-28-882: RNCC: 3 | RNVC: 2

5 Apr 1979

5340-14-543-0260
Mounting Bracket

145430260
708010S530-01B: RNCC: 3 | RNVC: 2

18 Aug 2004

5340-14-542-0487
Loop Clamp

145420487
21664127-124: RNCC: 3 | RNVC: 2
502106X02006A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-512-5455
Access Cover

145125455
F294-22-01: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-372-7282
Loop Clamp

143727282
21-65-00-22: RNCC: 3 | RNVC: 2
21-65-00-22: RNCC: 5 | RNVC: 2

21 Sep 1981

5340-14-209-7484
Mounting Bracket

142097484
1861-03-00-02: RNCC: 3 | RNVC: 2
1861-03-00-02: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-410-3381
Anchor Strap

144103381
110-633-24-09: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-14-384-0994
Access Cover

143840994
22201-123: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-483-3597
Angle Bracket

144833597
CESUFR8018-7300: RNCC: 3 | RNVC: 2

5 Sep 1996

5340-14-348-0064
Strap Fastener Loop

143480064
26425876: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-545-8842
Mounting Plate

145458842
8194351-6: RNCC: 3 | RNVC: 2

24 May 2005

5340-14-550-6282
Door Handle

145506282
81-7-8307: RNCC: 3 | RNVC: 2

3 Jul 2006

5340-14-303-3831
Quick Release Pin

143033831
24C1130: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-254-4898
Rod End Connector

142544898
HE60H60: RNCC: 3 | RNVC: 2
HE60H60: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-548-1698
Pin Removable Head

145481698
69013039: RNCC: 3 | RNVC: 2

13 Dec 2005

5340-14-342-4640
Pad Eye

143424640
311087: RNCC: 3 | RNVC: 2

16 May 1977

5340-14-306-4782
Loop Clamp

143064782
J040: RNCC: 3 | RNVC: 2
NYJ040: RNCC: 3 | RNVC: 2
J040NA: RNCC: 5 | RNVC: 2
13941804-4: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-436-7394
Plate Spacer

144367394
AL7651-2: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-405-2561
Rod End Clevis

144052561
3511 190 97681: RNCC: 3 | RNVC: 2
RAR3445: RNCC: 5 | RNVC: 2

27 Nov 1985

5340-14-299-9891
Strap End Clip

142999891
12203-018: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-544-3220
Mounting Bracket

145443220
0 363 02 069 0: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-14-486-1774
Mounting Bracket

144861774
PA01PD030502: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-370-5344
Loop Clamp

143705344
16324420: RNCC: 3 | RNVC: 2
16324420: RNCC: 5 | RNVC: 2
16324420: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-434-2252
Access Cover

144342252
30832650F: RNCC: 3 | RNVC: 2

13 Sep 1989

5340-14-479-4078
Stand Base

144794078
RA1M112115350N1: RNCC: 3 | RNVC: 2

10 Jan 1996

5340-14-346-1758
Vent Plug

143461758
5000889984: RNCC: 3 | RNVC: 2
59-29-1565: RNCC: 5 | RNVC: 9
59291565: RNCC: 5 | RNVC: 9
5000889984: RNCC: 5 | RNVC: 9

12 Dec 1977

5340-14-518-3677
Mounting Bracket

145183677
A10-14-130-52-1: RNCC: 3 | RNVC: 2
A10-14-130-52-1: RNCC: 5 | RNVC: 2
1150.10-14.130.52.1: RNCC: 5 | RNVC: 2

2 Feb 2000

5340-14-455-6271
Webbing Strap

144556271
ALZ080059011002: RNCC: 3 | RNVC: 2

2 Jun 1992

5340-14-550-4668
Angle Bracket

145504668
RA1B701335010N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-519-2798
Bow Handle

145192798
S8583924: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-420-6637
Clamping Catch

144206637
11-14703ZB: RNCC: 3 | RNVC: 2
1114703ZB: RNCC: 5 | RNVC: 2

16 Dec 1987

5340-14-490-3624
Door Closer

144903624
DLF1LX5209W/C1779: RNCC: 3 | RNVC: 2
DLF1LX5209W: RNCC: 5 | RNVC: 2

24 Sep 1997

5340-14-348-0479
Tubular Fairlead

143480479
969950: RNCC: 3 | RNVC: 2
969950: RNCC: 5 | RNVC: 9

29 Mar 1978

5340-14-438-4850
Metal Grille

144384850
332A61-2346-03: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-472-9157
Clamping Catch

144729157
37-10-051-20: RNCC: 3 | RNVC: 2
288-8559: RNCC: 5 | RNVC: 2

16 Nov 1994

5340-14-410-2922
Butt Hinge

144102922
332A22-1166-00: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-14-356-1141
Threaded Rod End

143561141
5763-01-014: RNCC: 3 | RNVC: 2
5763-01-014: RNCC: 5 | RNVC: 9
5763-01DIAM14: RNCC: 5 | RNVC: 9

5 Apr 1979

5340-14-548-3264
Access Cover

145483264
8049191: RNCC: 3 | RNVC: 2

8 Jan 2006

5340-14-429-2974
Cover Strip

144292974
F706-57-01: RNCC: 3 | RNVC: 2

11 Jan 1989

5340-14-368-3920
Tubular Fairlead

143683920
262-10-17018-01: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-14-371-4058
Anchor Strap

143714058
6254-29124: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-481-6302
Expansion Shield

144816302
FBR M 8/50: RNCC: 3 | RNVC: 2
0236298S00: RNCC: 5 | RNVC: 2

23 May 1996

5340-14-314-3128
Bow Handle

143143128
23021184: RNCC: 3 | RNVC: 2
23021184-6: RNCC: 5 | RNVC: 2
ET51-1693: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-303-2813
Access Cover

143032813
M309-00114: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-259-8149
Rod End Clevis

142598149
R4A271-75-03: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-330-0776
Mounting Plate

143300776
Z52-01-27ME: RNCC: 3 | RNVC: 2
85-647-1861: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-516-3974
Mounting Bracket

145163974
5721-498-0100/24: RNCC: 3 | RNVC: 9

22 Sep 1999

5340-14-427-2442
Rod End Clevis

144272442
4601DMP101-0006: RNCC: 3 | RNVC: 2

6 Oct 1988

5340-14-512-5452
Access Cover

145125452
F294-15-01: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-308-3731
Rod End Clevis

143083731
E4M703-12-10: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-418-4480
Bumper

144184480
8770-04: RNCC: 3 | RNVC: 2
7903088066: RNCC: 5 | RNVC: 2

26 Aug 1987

5340-14-519-1824
Access Cover

145191824
157E343-02: RNCC: 3 | RNVC: 2
157E343-02: RNCC: 5 | RNVC: 9

10 Mar 2000

5340-14-262-3616
Rod End Clevis

142623616
175-16-52: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-353-6406
Retaining Band

143536406
C32BB0101-057: RNCC: 3 | RNVC: 2
C32BB0101-057: RNCC: 5 | RNVC: 2
C32BB0101-057: RNCC: 5 | RNVC: 9

16 Jan 1979

5340-14-376-7947
Plug Button

143767947
78680-100041: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-485-6274
Utility Access Door

144856274
NO PRIMARY REF14-485-6274: RNCC: 3 | RNVC: 2
800900037: RNCC: 5 | RNVC: 9

6 Feb 1997

5340-14-350-8684
Rigid Caster

143508684
7510-10221: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-419-1614
Access Cover

144191614
AR1-31-00020: RNCC: 3 | RNVC: 2

8 Oct 1987

5340-14-252-7965
Access Cover

142527965
NO PRIMARY REF14-252-7965: RNCC: 3 | RNVC: 2
53065: RNCC: 5 | RNVC: 9
053065R: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-399-6916
Handwheel

143996916
13-222-200-18: RNCC: 3 | RNVC: 2
ESM13-222-200-18: RNCC: 5 | RNVC: 2

6 Mar 1985

5340-14-264-1695
Loop Clamp

142641695
55217-308ADL: RNCC: 3 | RNVC: 2
55217-308-000ADL: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-352-0222
Retaining Strap

143520222
341A41-1008-20: RNCC: 3 | RNVC: 2
341A41-1008-24: RNCC: 3 | RNVC: 2
F300 0T 004 4173: RNCC: E | RNVC: 8
341A41-1008-21: RNCC: E | RNVC: 8
91912867: RNCC: E | RNVC: 8

16 Oct 1978

5340-14-484-9562
Bumper

144849562
332A25-1168-20: RNCC: 3 | RNVC: 2

12 Dec 1996

5340-14-546-4121
Mounting Plate

145464121
21429036-00: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-14-366-5827
Access Cover

143665827
055W01-576583M: RNCC: 3 | RNVC: 2
0576583M00: RNCC: 5 | RNVC: 2

20 Nov 1980

5340-14-449-1061
Mounting Bracket

144491061
81011-15: RNCC: 3 | RNVC: 2

29 Jul 1991

5340-14-534-2422
Retaining Strap

145342422
728430S100-01A: RNCC: 3 | RNVC: 2

19 Mar 2003

5340-14-542-0008
Access Cover

145420008
20038-702: RNCC: 3 | RNVC: 2
502103005001A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-437-9515
Locking Stay

144379515
330A87-1095-01: RNCC: 3 | RNVC: 2

28 Feb 1990

5340-14-371-5815
Locking Stay

143715815
FA1R701-91: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-220-3363
Angle Bracket

142203363
NO PRIMARY REF14-220-3363: RNCC: 3 | RNVC: 2
109845: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-483-9064
Metal Grille

144839064
MAT853-0120DN125: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-14-315-7197
Retaining Strap

143157197
321A60-4608-20: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-411-2598
Butt Hinge

144112598
365A23-3021-01: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-540-6061
Loop Clamp

145406061
MS21919-DG24: RNCC: 3 | RNVC: 2
91303936: RNCC: 5 | RNVC: 2
DG24-26C: RNCC: 5 | RNVC: 2

8 Apr 2004

5340-14-483-0994
Buckle

144830994
94101-050-425: RNCC: 3 | RNVC: 2
197109-050: RNCC: 5 | RNVC: 2
97101-050-425: RNCC: 5 | RNVC: 9

8 Aug 1996

5340-14-384-7864
Angle Bracket

143847864
11-899-300: RNCC: 3 | RNVC: 2
11-899-300: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-452-8194
Protection Bellows

144528194
MAT522-0044REP31: RNCC: 3 | RNVC: 2
MAT522-0044REP31: RNCC: 5 | RNVC: 2

22 Jan 1992

5340-14-391-0056
Corner Brace

143910056
066-13-104: RNCC: 3 | RNVC: 2

1 Mar 1984

5340-14-394-7223
Rim Lock Set

143947223
NO PRIMARY REF14-394-7223: RNCC: 3 | RNVC: 2
6600-04FE008: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-517-4060
Mounting Bracket

145174060
803481140119: RNCC: 3 | RNVC: 2
SDM803481140119: RNCC: 5 | RNVC: 9

8 Dec 1999

5340-14-515-2219
Access Cover

145152219
0009620247: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-375-9212
Access Cover

143759212
1304M5-2: RNCC: 3 | RNVC: 2

30 Mar 1982

5340-14-481-7065
Access Cover

144817065
46420291: RNCC: 3 | RNVC: 2

25 May 1996

5340-14-286-7893
Retaining Strap

142867893
2407-40: RNCC: 3 | RNVC: 2
2407-40: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-279-7362
Retaining Strap

142797362
201797: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-522-6957
Pipe Hanger

145226957
01248010: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-14-276-2726
Quick Release Pin

142762726
160-18204: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-261-1556
Rod End Clevis

142611556
175-32-165: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-372-6926
Access Cover

143726926
2874-14: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-401-5864
Loop Clamp

144015864
050A66-641803C: RNCC: 3 | RNVC: 2
0641803C00: RNCC: 5 | RNVC: 2

13 Jun 1985

5340-14-528-8345
Threaded Rod End

145288345
50MH0-8X5-5: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-14-500-5070
Mounting Plate

145005070
NO PRIMARY REF14-500-5070: RNCC: 3 | RNVC: 2
2313-21: RNCC: 5 | RNVC: 9
F300 0T 024 5243: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-349-2918
Access Cover

143492918
1045543: RNCC: 3 | RNVC: 2
1045543: RNCC: 5 | RNVC: 2

22 May 1978

5340-14-505-0310
Access Cover

145050310
018528A: RNCC: 3 | RNVC: 2
5000814076: RNCC: 5 | RNVC: 2
CHN018528A: RNCC: 5 | RNVC: 9

11 Mar 1998

5340-14-287-5810
Rod End Clevis

142875810
9440-248: RNCC: 3 | RNVC: 2
9440-248: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-350-4283
Anchor Strap

143504283
214532: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-202-2126
Rod End Clevis

142022126
STE43: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-521-3538
Mounting Bracket

145213538
27152019-3: RNCC: 3 | RNVC: 2

20 Jul 2000

5340-14-422-8545
Rod End Clevis

144228545
970298P03: RNCC: 3 | RNVC: 2
970298P03: RNCC: 5 | RNVC: 9

22 Mar 1988

5340-14-533-2951
Rod End Clevis

145332951
12-725-154: RNCC: 3 | RNVC: 2
SZ12.725.154: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-440-9623
Anchor Strap

144409623
F135171B: RNCC: 3 | RNVC: 2

9 Aug 1990

5340-14-510-6824
Access Cover

145106824
47062855: RNCC: 3 | RNVC: 2

4 Nov 1998

5340-14-326-4817
Access Cover

143264817
105006: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-412-9461
Wiring Harness

144129461
FA1R762-42: RNCC: 3 | RNVC: 2

5 Nov 1986

5340-14-430-9479
Pipe Hanger

144309479
G230075-19: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-14-320-9371
Loop Clamp

143209371
3EX4-001: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-459-6665
Arched Cushion

144596665
MAT169-0012F19DE26: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-462-5871
Mounting Bracket

144625871
C63278-10: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-14-516-0314
Angle Bracket

145160314
312-18442-002: RNCC: 3 | RNVC: 2

6 Sep 1999

5340-14-550-4936
Mounting Bracket

145504936
78717-138-22E: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-423-6870
Anchor Strap

144236870
13-201-145-03: RNCC: 3 | RNVC: 2

27 Apr 1988

5340-14-473-8410
Mounting Bracket

144738410
332A72-1378-00: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-315-0820
Handwheel

143150820
GSM446-009F18: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-304-4399
Threaded Rod End

143044399
8810498002: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-425-4558
Retaining Strap

144254558
21114101-0: RNCC: 3 | RNVC: 2

5 Jul 1988

5340-14-217-8277
Loop Clamp

142178277
3160S73-69-412: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-269-4362
Leaf Spring

142694362
NO PRIMARY REF14-269-4362: RNCC: 3 | RNVC: 2
226BT38F0UGA: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-438-9409
Mounting Plate

144389409
79124793: RNCC: 3 | RNVC: 2
79124793: RNCC: 5 | RNVC: 9

11 Apr 1990

5340-14-356-8513
Butt Hinge

143568513
N417-3REP9CHARNIERE: RNCC: 3 | RNVC: 2

15 May 1979

5340-14-441-4691
Angle Bracket

144414691
PU369043: RNCC: 3 | RNVC: 2
14587Z10: RNCC: 5 | RNVC: 2

29 Aug 1990

5340-14-502-5532
Mounting Bracket

145025532
5000820272: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-287-5891
Rod End Clevis

142875891
A10-69-050-06-0: RNCC: 3 | RNVC: 2
A10-69-050-06-0: RNCC: 3 | RNVC: 2
A10-69-050-06-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-484-9876
Loop Clamp

144849876
RSGU1-52-15W5: RNCC: 3 | RNVC: 2
RSGU 1-52/15-W5: RNCC: 5 | RNVC: 2

18 Dec 1996

5340-14-390-8927
Rod End Clevis

143908927
ST159-2M313P31: RNCC: 3 | RNVC: 2
J05087-313-1000P031: RNCC: 3 | RNVC: 2

1 Mar 1984

5340-14-383-8035
Control Rod

143838035
682-41631-00-94: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-350-6186
Mending Plate

143506186
3160S76-21-454: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-511-6235
Pipe Hanger

145116235
78732-026-037A: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-276-2790
Rod End Clevis

142762790
160-61566-01: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-441-6325
Webbing Strap

144416325
332A91-2403-11: RNCC: 3 | RNVC: 2

5 Sep 1990

5340-14-303-5184
Sliding Door Track

143035184
3160S25-21-055: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-438-4569
Doorstop

144384569
332A22-1385-01: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-514-9395
Access Cover

145149395
78740A25-60-100: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-14-372-1816
Retaining Strap

143721816
100SP27-0028: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-451-9786
Butt Hinge

144519786
MS7524-1CA7200: RNCC: 3 | RNVC: 2
MS7524-1CA: RNCC: 5 | RNVC: 2
MS7524-1CA1830: RNCC: 5 | RNVC: 2
MS7524-1CA1830: RNCC: 5 | RNVC: 9
MS7524-1CA: RNCC: 5 | RNVC: 9

17 Dec 1991

5340-14-512-2210
Mounting Bracket

145122210
4374-0051: RNCC: 3 | RNVC: 2

8 Feb 1999

5340-14-246-0597
Bumper

142460597
NO PRIMARY REF14-246-0597: RNCC: 3 | RNVC: 2
13190-40: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-411-0063
Anchor Strap

144110063
376-600-10: RNCC: 3 | RNVC: 2
85-693-3180: RNCC: 6 | RNVC: 9

28 Jul 1986

5340-14-419-5270
Plug Button

144195270
M270-20225: RNCC: 3 | RNVC: 2

21 Oct 1987

5340-14-414-5576
Access Cover

144145576
T20-13H2001: RNCC: 3 | RNVC: 2

11 Feb 1987

5340-14-299-2120
Mounting Plate

142992120
007-32-22: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-454-6939
Mounting Plate

144546939
2085-02-028: RNCC: 3 | RNVC: 2
89411590: RNCC: 5 | RNVC: 9

9 Apr 1992

5340-14-490-1786
Mounting Plate

144901786
5302357.02 39.02 REP A1: RNCC: 3 | RNVC: 2
5302357-02 39-02-REP A1: RNCC: 5 | RNVC: 2
5302357-02 39-02REPA1: RNCC: 5 | RNVC: 2
F300 0T 024 2504: RNCC: 6 | RNVC: 9

17 Sep 1997

5340-14-334-4749
Handle Grip

143344749
NO PRIMARY REF14-334-4749: RNCC: 3 | RNVC: 2
4250-50-02: RNCC: 5 | RNVC: 2

1 Jun 1976

5340-14-545-2803
Clip Retainer Plate

145452803
21226880-00: RNCC: 3 | RNVC: 2

31 Mar 2005

5340-14-228-9022
Access Cover

142289022
JEA20-46A: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-551-2612
Utility Access Door

145512612
730010S942-10A: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-549-8584
Utility Access Door

145498584
2092346-001: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-466-7025
Mounting Plate

144667025
820952-62: RNCC: 3 | RNVC: 2

24 Nov 1993

5340-14-306-6824
Access Cover

143066824
554-418-804DET11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-309-1227
Mending Plate

143091227
L12: RNCC: 3 | RNVC: 2
L1001-12: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-554-1778
Angle Bracket

145541778
CLB501-610-422: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-339-9727
Retaining Strap

143399727
SQ9-07-01-05: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-216-7624
Snap Hook

142167624
NO PRIMARY REF14-216-7624: RNCC: 3 | RNVC: 2
60567: RNCC: 5 | RNVC: 2
60567: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-519-5120
Access Cover

145195120
456-10978-200: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-321-6955
Webbing Strap

143216955
NO PRIMARY REF14-321-6955: RNCC: 3 | RNVC: 2
TB1904M56SANGLEC0LISAGE1000MM: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-506-6808
Dashpot Piston

145066808
PLOT 7C/C0018: RNCC: 3 | RNVC: 2
PLOT 7C: RNCC: 5 | RNVC: 2

6 May 1998

5340-14-268-9890
Handwheel

142689890
MAT137-003F3ACIER: RNCC: 3 | RNVC: 2
553-000MA060F5-2N1: RNCC: 5 | RNVC: 2
GSM137-007F15ACIER: RNCC: 5 | RNVC: 2
GSM137-07F15ACIER: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-433-1126
Runner

144331126
RA44-0550V: RNCC: 3 | RNVC: 2
77091462: RNCC: 3 | RNVC: 2
91434997: RNCC: 5 | RNVC: 2
RA44LONGUEUR550: RNCC: 5 | RNVC: 2
77091462: RNCC: 5 | RNVC: 9
RA44-550B1: RNCC: 5 | RNVC: 9

11 Jul 1989

5340-14-375-9724
Anchor Strap

143759724
NO PRIMARY REF14-375-9724: RNCC: 3 | RNVC: 2
404403043: RNCC: 5 | RNVC: 2
404403043: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-336-2236
Rod End Clevis

143362236
3160S23-11-830: RNCC: 3 | RNVC: 2
85-647-4360: RNCC: 6 | RNVC: 9

24 Jul 1976

5340-14-421-7172
Loop Clamp

144217172
3-2633-02-100A: RNCC: 3 | RNVC: 2
9560138590: RNCC: 5 | RNVC: 2
3-2633-02-100A: RNCC: 5 | RNVC: 9

27 Jan 1988

5340-14-428-7638
Anchor Strap

144287638
A02453-05-2000P003: RNCC: 3 | RNVC: 2

17 Dec 1988

5340-14-391-7896
Runner

143917896
V2PM3243-120041: RNCC: 3 | RNVC: 2
V2PM3243-120041: RNCC: 5 | RNVC: 2

21 Mar 1984

5340-14-389-1830
Handwheel

143891830
14-70-125-49: RNCC: 3 | RNVC: 9

29 Nov 1983

5340-14-437-4638
Mounting Bracket

144374638
332A91-2402-00: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-532-5575
Mounting Bracket

145325575
330A52-0200-0051: RNCC: 3 | RNVC: 2

13 Nov 2002

5340-14-352-8637
Synchro Clamp

143528637
S3669-1DG: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-364-5057
Runner

143645057
539788012: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-14-546-7324
Mounting Bracket

145467324
S258A4012111: RNCC: 3 | RNVC: 2

9 Aug 2005

5340-14-518-9329
Mounting Bracket

145189329
140A148: RNCC: 3 | RNVC: 2
140A148: RNCC: 3 | RNVC: 9

29 Feb 2000

5340-14-508-7492
Access Cover

145087492
19207803: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-14-489-5338
Access Cover

144895338
20620580: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-14-522-6890
Access Cover

145226890
HB50A65: RNCC: 3 | RNVC: 2
CAE01256: RNCC: 5 | RNVC: 2

15 Nov 2000

5340-14-349-0913
Access Cover

143490913
6202535: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-14-482-6802
Access Hole Frame

144826802
47029646: RNCC: 3 | RNVC: 2

18 Jul 1996

5340-14-514-0404
Section Block Clamp

145140404
PM1A741394012: RNCC: 3 | RNVC: 2
PM1A741394012: RNCC: 5 | RNVC: 2

22 Apr 1999

5340-14-371-3039
Anchor Strap

143713039
0035734428: RNCC: 3 | RNVC: 2
35734428: RNCC: 5 | RNVC: 9
0035734428: RNCC: 5 | RNVC: 9

5 Aug 1981

5340-14-532-6732
Access Cover

145326732
19221292: RNCC: 3 | RNVC: 2

27 Nov 2002

5340-14-360-2737
Access Cover

143602737
70269040: RNCC: 3 | RNVC: 2
70269030: RNCC: 5 | RNVC: 2
70269040: RNCC: 5 | RNVC: 2
SAF70269040: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-043-1272
Handwheel

140431272
069U20-692353Q: RNCC: 3 | RNVC: 2
0692353Q00: RNCC: 5 | RNVC: 2

10 Apr 1984

5340-14-380-4612
Plug Button

143804612
07048: RNCC: 3 | RNVC: 2
1106106900: RNCC: 5 | RNVC: 2
61069: RNCC: 5 | RNVC: 2

29 Nov 1982

5340-14-540-2922
Access Cover

145402922
61061791AA: RNCC: 3 | RNVC: 2

18 Mar 2004

5340-14-551-1197
Access Cover

145511197
45271073: RNCC: 3 | RNVC: 2

28 Aug 2006

5340-14-519-9991
Access Cover

145199991
8016533T00: RNCC: 3 | RNVC: 2

3 May 2000

5340-14-414-7398
Rod End Clevis

144147398
346586: RNCC: 3 | RNVC: 2
346586: RNCC: 5 | RNVC: 9

26 Feb 1987

5340-14-459-0151
Support Hook

144590151
4153E10: RNCC: 3 | RNVC: 2

13 Nov 1992

5340-14-467-4120
Mounting Plate

144674120
1060950M00: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-14-550-9014
Mounting Plate

145509014
10527942: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-522-5166
Access Cover

145225166
T62156010900: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-14-298-8253
Buckle

142988253
000672007P: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-462-6136
Stand Base

144626136
407027: RNCC: 3 | RNVC: 2
77093856: RNCC: 5 | RNVC: 2
Z90: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-518-5627
Metal Grille

145185627
5000747231: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-384-4057
Furniture Leg Tip

143844057
SERIEAEMB0UTR0NDN0IR32: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-518-9844
Utility Access Door

145189844
706898: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-300-2926
Access Cover

143002926
R112062: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-454-6712
Clamping Catch

144546712
11-14703IP: RNCC: 3 | RNVC: 2

9 Apr 1992

5340-14-423-5003
Protection Bellows

144235003
50057150: RNCC: 3 | RNVC: 2
91611206: RNCC: 5 | RNVC: 2

21 Apr 1988

5340-14-515-3166
Bridge Clamp

145153166
0009839401: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-548-1516
Mounting Bracket

145481516
82122272000: RNCC: 3 | RNVC: 2

13 Dec 2005

5340-14-402-7136
Clamping Catch

144027136
4FE201ZB: RNCC: 3 | RNVC: 2
115: RNCC: 5 | RNVC: 2
3006088: RNCC: 5 | RNVC: 2
LH92040ZB: RNCC: 5 | RNVC: 2
GE40EV: RNCC: 5 | RNVC: 2
LH92040FZB24X5IR: RNCC: 5 | RNVC: 9
LH92064ZB24X5IR: RNCC: 5 | RNVC: 9
4FE201P01: RNCC: 5 | RNVC: 9

19 Jul 1985

5340-14-369-9891
Mending Plate

143699891
M363-04779: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-472-8800
Access Cover

144728800
332A41-4193-20: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-370-7395
Quick Release Pin

143707395
676-43160-01: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-482-2241
Mounting Bracket

144822241
51533-199-1: RNCC: 3 | RNVC: 2
51533-199-1: RNCC: 5 | RNVC: 9

27 Jun 1996

5340-14-483-9391
Webbing Strap

144839391
020002-2-01218: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-14-403-5191
Angle Bracket

144035191
10624-06-01: RNCC: 3 | RNVC: 2
10624-007-06: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-354-2150
Locking Stay

143542150
9181-03: RNCC: 3 | RNVC: 2

30 Jan 1979

5340-14-504-0969
Angle Bracket

145040969
CS2-0.000.194: RNCC: 3 | RNVC: 2

6 Feb 1998

5340-14-352-6798
Access Cover

143526798
294SP31-0031: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-549-8834
Mounting Plate

145498834
2093336-001: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-310-2489
Rod End Clevis

143102489
773-418-124DET28: RNCC: 3 | RNVC: 2
773-418-124DET28: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-236-5669
Rod End Clevis

142365669
321A27-0438-20: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-476-0406
Section Block Clamp

144760406
20731500101: RNCC: 3 | RNVC: 2
PAA73-15-001-01: RNCC: 5 | RNVC: 2

17 May 1995

5340-14-377-2463
Access Cover

143772463
3160S51-13-157: RNCC: 3 | RNVC: 2
3160S-51-13.157: RNCC: 5 | RNVC: 2

17 May 1982

5340-14-041-6232
Angle Bracket

140416232
3511 130 88271: RNCC: 3 | RNVC: 2
3511-130-88271: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-524-7519
Mounting Bracket

145247519
21231597-00: RNCC: 3 | RNVC: 2
21231597-4: RNCC: 5 | RNVC: 2

11 Apr 2001

5340-14-365-3209
Retaining Strap

143653209
650-403-042-0: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-472-8957
Section Block Clamp

144728957
332A75-1623-20: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-478-0547
Mounting Bracket

144780547
418-01536-000: RNCC: 3 | RNVC: 2

11 Oct 1995

5340-14-398-7494
Access Cover

143987494
5000806248: RNCC: 3 | RNVC: 2
D77438-11A: RNCC: 3 | RNVC: 2
D77438-11: RNCC: 3 | RNVC: 9
5000806248: RNCC: 5 | RNVC: 9

6 Feb 1985

5340-14-511-2453
Runner

145112453
429844: RNCC: 3 | RNVC: 2
429844-001: RNCC: 5 | RNVC: 9

9 Dec 1998

5340-14-517-4143
Access Cover

145174143
F1302535: RNCC: 3 | RNVC: 2

8 Dec 1999

5340-14-456-3235
Retaining Bail

144563235
MAT162-0070F1: RNCC: 3 | RNVC: 2

25 Jun 1992

5340-14-455-9475
Access Cover

144559475
PM1A761162260: RNCC: 3 | RNVC: 2
PM1A761162260: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-363-8967
Anchor Strap

143638967
NO PRIMARY REF14-363-8967: RNCC: 3 | RNVC: 2
Z48640: RNCC: 5 | RNVC: 9

7 Aug 1980

5340-14-400-3376
Access Cover

144003376
20780871: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-249-8157
Access Cover

142498157
HE60E17: RNCC: 3 | RNVC: 2
HE60E17: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-383-5296
Access Cover

143835296
18606438: RNCC: 3 | RNVC: 2
18606438: RNCC: 5 | RNVC: 2

11 Apr 1983

5340-14-553-9657
Access Cover

145539657
10660705: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-14-329-5580
Access Cover

143295580
0000140508: RNCC: 3 | RNVC: 2
140508: RNCC: 5 | RNVC: 9
0000140508: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-488-7424
Access Cover

144887424
5651935F01: RNCC: 3 | RNVC: 2
1098387W00: RNCC: 5 | RNVC: 2

28 May 1997

5340-14-475-5801
Butt Hinge

144755801
1056-U6: RNCC: 3 | RNVC: 2
CAE01589: RNCC: 5 | RNVC: 2
C191-1056-U6: RNCC: 5 | RNVC: 2

19 Apr 1995

5340-14-370-6899
Anchor Strap

143706899
5000240533: RNCC: 3 | RNVC: 2
5000240533: RNCC: 5 | RNVC: 9

5 Jun 1981

5340-14-517-7051
Access Cover

145177051
GC7256: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-290-0593
Access Cover

142900593
0211207160: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-328-4424
Control Rod

143284424
6854-2054: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-220-4941
Access Cover

142204941
62734: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-444-5325
Plug Button

144445325
MB700-090: RNCC: 3 | RNVC: 2
GF90369: RNCC: 5 | RNVC: 2
MB700090: RNCC: 5 | RNVC: 2
GF90369: RNCC: 5 | RNVC: 2

15 Jan 1991

5340-14-325-5126
Rod End Clevis

143255126
74169: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-519-1804
Rod End Connector

145191804
5SH41596403: RNCC: 3 | RNVC: 2

10 Mar 2000

5340-14-387-0581
Rod End Connector

143870581
26033003900: RNCC: 3 | RNVC: 2
260330039: RNCC: 5 | RNVC: 9

24 Aug 1983

5340-14-493-6834
Mounting Plate

144936834
443 786 IND.1: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-402-7299
Flush Catch Claw

144027299
602773: RNCC: 3 | RNVC: 2

19 Jul 1985

5340-14-400-0795
Strap Fastener Loop

144000795
161378: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-448-3885
Webbing Strap

144483885
9401CRL101-2: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-14-481-3576
Angle Bracket

144813576
21553139-3: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-483-8341
Pad Eye

144838341
422504: RNCC: 3 | RNVC: 2
422504: RNCC: 5 | RNVC: 2

3 Oct 1996

5340-14-481-2502
T Plate

144812502
1302141P313: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-14-542-1191
Mounting Bracket

145421191
27119940-6: RNCC: 3 | RNVC: 2

7 Jul 2004

5340-14-270-9974
Quick Release Pin

142709974
574-3: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-317-1566
Flush Catch Claw

143171566
39670: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-458-8831
Retaining Strap

144588831
M628-220000: RNCC: 3 | RNVC: 2
032566T: RNCC: 5 | RNVC: 2

5 Nov 1992

5340-14-415-6484
Retaining Strap

144156484
3160S78-01-010: RNCC: 3 | RNVC: 2

18 May 1987

5340-14-533-4625
Cover Strip

145334625
55-250-119: RNCC: 3 | RNVC: 2
SZ55.250.119: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-402-9790
Webbing Strap

144029790
136-81-10200: RNCC: 3 | RNVC: 9

25 Jul 1985

5340-14-383-2109
Quick Release Pin

143832109
620C8B35: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-382-9074
Access Cover

143829074
NO PRIMARY REF14-382-9074: RNCC: 3 | RNVC: 2
0000146714: RNCC: 5 | RNVC: 2
30903259: RNCC: 5 | RNVC: 9

17 Mar 1983

5340-14-506-6519
Butt Hinge

145066519
430-70-01-05: RNCC: 3 | RNVC: 2
CP1201230-40-630: RNCC: 5 | RNVC: 2
CPI201230-40-630: RNCC: 5 | RNVC: 2

5 May 1998

5340-14-519-7767
Lock-Release Lever

145197767
4727309-01: RNCC: 3 | RNVC: 2

5 Apr 2000

5340-14-425-4742
Handwheel

144254742
F150D125-12: RNCC: 3 | RNVC: 9

6 Jul 1988

5340-14-500-9587
Bail Handle

145009587
19-7-3633: RNCC: 3 | RNVC: 2
F300 0T 024 9799: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-403-1763
Rod End Clevis

144031763
ST159-2M761P198: RNCC: 3 | RNVC: 2

25 Jul 1985

5340-14-443-8809
Stand Base

144438809
27-99970-418-00: RNCC: 3 | RNVC: 2
27-99970-418-00: RNCC: 5 | RNVC: 9

11 Dec 1990

5340-14-257-8216
Bumper

142578216
NO PRIMARY REF14-257-8216: RNCC: 3 | RNVC: 2
2911540: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-268-9957
Handwheel

142689957
000MA1055F12REP1: RNCC: 3 | RNVC: 2
000MA0060F21-2C1: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-532-3957
Angle Bracket

145323957
78701-055C: RNCC: 3 | RNVC: 2

30 Oct 2002

Load More Results