What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 140 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 140 of 446

5340-14-436-2512
Block Clamp

144362512
21-615-600: RNCC: 3 | RNVC: 2
21-615-600: RNCC: 5 | RNVC: 9

11 Dec 1989

5340-14-466-5663
Angle Bracket

144665663
052-500-08-01: RNCC: 3 | RNVC: 2

16 Nov 1993

5340-14-549-9710
Mounting Bracket

145499710
EA6M701-11-950: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-377-3367
Access Cover

143773367
444-10246-000: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-351-1034
Bridge Clamp

143511034
8727113-001: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-552-2409
Loop Clamp

145522409
NSA55219-316B237DB: RNCC: 1 | RNVC: 2
552193161901: RNCC: 3 | RNVC: 2

5 Dec 2006

5340-14-482-5320
Mounting Plate

144825320
4422-067: RNCC: 3 | RNVC: 2

11 Jul 1996

5340-14-529-7940
Mounting Plate

145297940
S4710X0009-6009: RNCC: 3 | RNVC: 2

10 Apr 2002

5340-14-410-7450
Mounting Plate

144107450
A02358-02-3000P037: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-344-6268
Angle Bracket

143446268
T20-13B1641: RNCC: 3 | RNVC: 2

9 Sep 1977

5340-14-474-5970
Retaining Strap

144745970
304-004-301-0: RNCC: 3 | RNVC: 2

22 Feb 1995

5340-14-447-9998
Dashpot

144479998
293550B: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-436-6966
Cover Strip

144366966
DA2N260032103: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-393-7896
Loop Clamp

143937896
MS300-8-22: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-525-2621
Handwheel

145252621
06470P042010: RNCC: 3 | RNVC: 2
03792100: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-533-3969
Mounting Bracket

145333969
708010S000-72A: RNCC: 3 | RNVC: 2

3 Feb 2003

5340-14-232-4608
Retaining Strap

142324608
6005: RNCC: 3 | RNVC: 9
20134010: RNCC: 5 | RNVC: 2
6005: RNCC: 5 | RNVC: 9
20134010: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-230-6453
Retaining Strap

142306453
DLT002944: RNCC: 3 | RNVC: 2
DLT02944: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-041-5521
Loop Clamp

140415521
892744: RNCC: 3 | RNVC: 2
892744: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-526-4473
Pipe Hanger

145264473
RA1M702502711: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-549-9203
Mounting Plate

145499203
2092528: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-549-6857
Mounting Bracket

145496857
10426935: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-14-441-2406
Threaded Rod End

144412406
D53297: RNCC: 3 | RNVC: 2
D53297: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-14-489-5492
Mounting Plate

144895492
47121538: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-14-502-6107
Retaining Clip

145026107
5010166167: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-031-1689
Retaining Strap

140311689
VDP4577: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-543-5598
Mounting Bracket

145435598
210706: RNCC: 3 | RNVC: 2

23 Nov 2004

5340-14-483-4745
Angle Bracket

144834745
47134085: RNCC: 3 | RNVC: 2

12 Sep 1996

5340-14-286-2355
Rod End Clevis

142862355
631MA0040REP35: RNCC: 3 | RNVC: 2
631MA040REP35: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-457-6089
Support Hook

144576089
PM1A861350020: RNCC: 3 | RNVC: 2
PM1A861350020: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-310-2415
Butt Hinge

143102415
16-3063: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-415-9028
Bumper

144159028
950233: RNCC: 3 | RNVC: 2

26 May 1987

5340-14-461-6736
Mounting Bracket

144616736
0000798085: RNCC: 3 | RNVC: 2
TID25134: RNCC: 5 | RNVC: 2

22 Mar 1993

5340-14-525-6623
Access Cover

145256623
20 242 031 1410: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-413-9053
Retaining Strap

144139053
189930: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-547-7271
Mounting Bracket

145477271
100 765 52: RNCC: 3 | RNVC: 2
AA018078: RNCC: 6 | RNVC: 9

7 Nov 2005

5340-14-541-8574
Angle Bracket

145418574
10663558: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-400-0857
Angle Bracket

144000857
214168: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-479-4614
Handwheel

144794614
7000171ACIE806: RNCC: 3 | RNVC: 2
7000171ACIE806: RNCC: 3 | RNVC: 9

12 Jan 1996

5340-14-467-8384
Angle Bracket

144678384
7705028074: RNCC: 3 | RNVC: 2

27 Jan 1994

5340-14-500-7873
Mounting Bracket

145007873
D64408200000: RNCC: 3 | RNVC: 2
F300 0T 024 8073: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-309-3931
Compression Cup

143093931
46500M3REP8: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-468-0823
Detent Plunger

144680823
LYN009055013420: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-548-6098
Angle Bracket

145486098
RA1M7047826211A1: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-554-3086
Mounting Bracket

145543086
9405.49095: RNCC: 3 | RNVC: 2

20 Jun 2007

5340-14-549-0823
Cover Strip

145490823
RA1M721325729A1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-476-2451
Loop Clamp

144762451
1102604T00: RNCC: 3 | RNVC: 2

31 May 1995

5340-14-548-1102
Angle Bracket

145481102
RA1A701772331A2N1: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-551-5330
Mounting Bracket

145515330
SZ16.705.417: RNCC: 3 | RNVC: 2

28 Sep 2006

5340-14-551-2773
Angle Bracket

145512773
RA1B701716321: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-528-9457
Loop Clamp

145289457
EN4114F05WH0: RNCC: 2 | RNVC: 2

27 Feb 2002

5340-14-480-6673
Leakproof Seal Plug

144806673
050144: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-527-7499
Mounting Bracket

145277499
709819: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-14-483-8003
Masking Plate

144838003
8001124T00: RNCC: 3 | RNVC: 2

3 Oct 1996

5340-14-539-3137
Mounting Plate

145393137
T642G4001802: RNCC: 3 | RNVC: 2

22 Dec 2003

5340-14-547-7200
Mounting Bracket

145477200
100 765 45: RNCC: 3 | RNVC: 2
AA018085: RNCC: 6 | RNVC: 9

7 Nov 2005

5340-14-431-1722
Split Tubular Clip

144311722
235010933020001: RNCC: 3 | RNVC: 2
235FD093300: RNCC: 5 | RNVC: 1
23501093302: RNCC: 5 | RNVC: 2
5000808761: RNCC: 5 | RNVC: 2

11 Apr 1989

5340-14-563-6373
Utility Access Door

145636373
A03M145: RNCC: 3 | RNVC: 2

2 Mar 2010

5340-14-508-2701
Retaining Strap

145082701
10279344: RNCC: 3 | RNVC: 2

2 Sep 1998

5340-14-450-2202
Loop Clamp

144502202
Y8211118: RNCC: 3 | RNVC: 2
9610010420: RNCC: 5 | RNVC: 2
RP11: RNCC: 5 | RNVC: 2
91613001: RNCC: 5 | RNVC: 2

25 Sep 1991

5340-14-341-1237
Bridge Clamp

143411237
002527080P: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-462-5786
Mounting Bracket

144625786
C50416-1: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-14-459-1401
Protection Bellows

144591401
7201460008: RNCC: 3 | RNVC: 2
5000588816: RNCC: 5 | RNVC: 2

19 Nov 1992

5340-14-425-5565
Mounting Plate

144255565
005063000098: RNCC: 3 | RNVC: 2

7 Jul 1988

5340-14-496-2228
Mounting Bracket

144962228
72811-3: RNCC: 3 | RNVC: 2
F300 0T 021 0407: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-469-9182
Mounting Bracket

144699182
202901: RNCC: 3 | RNVC: 2

18 May 1994

5340-14-277-7125
Protection Bellows

142777125
9424: RNCC: 3 | RNVC: 9
0855760900: RNCC: 5 | RNVC: 2
0855760900: RNCC: 5 | RNVC: 2
0855760900: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-450-2114
Mounting Bracket

144502114
5000923887: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-523-4914
Cover Strip

145234914
01-250-395: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-14-482-9411
Pipe Hanger

144829411
78733-040-040: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-523-1763
Bow Handle

145231763
30333191: RNCC: 3 | RNVC: 2
91436479: RNCC: 5 | RNVC: 2

10 Jan 2001

5340-14-404-6408
Retaining Strap

144046408
NO PRIMARY REF14-404-6408: RNCC: 3 | RNVC: 2
50909: RNCC: 5 | RNVC: 9

20 Nov 1985

5340-14-273-6916
Mending Plate

142736916
STM156673B: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-374-5946
Bumper

143745946
5000011338: RNCC: 3 | RNVC: 2
5000011338: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-379-4398
Mounting Plate

143794398
2206-341B514: RNCC: 3 | RNVC: 2

1 Oct 1982

5340-14-292-2677
Stake Pocket

142922677
C556448: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-512-0172
Bridge Clamp

145120172
93828867: RNCC: 3 | RNVC: 2
93814034: RNCC: 5 | RNVC: 2
0052836: RNCC: 5 | RNVC: 2
93814034: RNCC: 5 | RNVC: 9

2 Feb 1999

5340-14-515-2156
Angle Bracket

145152156
0009317129: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-364-4881
Access Cover

143644881
426433141: RNCC: 3 | RNVC: 9

2 Sep 1980

5340-14-505-0926
Access Cover

145050926
05077900: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-358-3958
Anchor Strap

143583958
387815: RNCC: 3 | RNVC: 2

13 Aug 1979

5340-14-444-2712
Snap Hook

144442712
473021: RNCC: 3 | RNVC: 2
MOUSQUETON ACCROCHAGE MIXGERS 78: RNCC: 5 | RNVC: 2

21 Dec 1990

5340-14-480-8352
Anchor Strap

144808352
10021168: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-14-031-1989
Access Cover

140311989
802740813: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-515-1699
Mounting Plate

145151699
A93000014: RNCC: 3 | RNVC: 2

9 Jul 1999

5340-14-339-2876
Mending Plate

143392876
141604N1: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-312-1181
Retaining Strap

143121181
169401: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-508-1580
Mounting Bracket

145081580
4773820160: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-383-4177
Rod End Clevis

143834177
16765033: RNCC: 3 | RNVC: 2
16765033: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-211-0852
Access Cover

142110852
18593: RNCC: 3 | RNVC: 2
18593: RNCC: 6 | RNVC: 9

1 Jan 1964

5340-14-258-8166
Retaining Band

142588166
261BS: RNCC: 3 | RNVC: 9
1000351: RNCC: 5 | RNVC: 9
1000351P: RNCC: 5 | RNVC: 9
261B: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-439-3658
Pipe Hanger

144393658
DA2C707111421: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-366-1887
Corner Brace

143661887
43559: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-430-5619
Plug Button

144305619
PM1A214750307: RNCC: 3 | RNVC: 2
PM1A214750307: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-369-9119
Retaining Strap

143699119
114083014: RNCC: 3 | RNVC: 2
114083014: RNCC: 5 | RNVC: 2

18 May 1981

5340-14-235-2856
Rod End Clevis

142352856
122291-181: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-410-7273
Mounting Plate

144107273
160H702501-55: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-509-0159
Access Cover

145090159
034450010: RNCC: 3 | RNVC: 2

14 Oct 1998

5340-14-554-5411
Access Cover

145545411
0164167560: RNCC: 3 | RNVC: 2

18 Jul 2007

5340-14-444-9120
Mounting Bracket

144449120
563237: RNCC: 3 | RNVC: 2

28 Jan 1991

5340-14-549-0719
Mounting Bracket

145490719
RA1M291710125A1N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-531-6194
Mounting Bracket

145316194
541002: RNCC: 3 | RNVC: 2
CU327201: RNCC: 3 | RNVC: 2

4 Sep 2002

5340-14-312-8304
Mounting Bracket

143128304
0249857320: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-483-1431
Snap Hook

144831431
M20: RNCC: 3 | RNVC: 2

15 Aug 1996

5340-14-480-4304
Access Cover

144804304
002421460A: RNCC: 3 | RNVC: 2
8360-115: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-031-1811
Clamping Catch

140311811
GO.7-BR: RNCC: 3 | RNVC: 2
G007BR: RNCC: 5 | RNVC: 2

14 Jun 1980

5340-14-387-2375
Webbing Strap

143872375
3511 191 70991: RNCC: 3 | RNVC: 2
3511-191-70991: RNCC: 5 | RNVC: 2

15 Sep 1983

5340-14-353-6764
Loop Clamp

143536764
501-804-550-0: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-300-9695
Rod End Connector

143009695
341A96-3002-53: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-373-7081
Bumper

143737081
365A21-3459-20: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-257-2424
Mending Plate

142572424
330A25-2202-41: RNCC: 3 | RNVC: 2
330A25-2202-4100: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-210-6743
Access Cover

142106743
85256: RNCC: 3 | RNVC: 2
60161-04: RNCC: 3 | RNVC: 9

1 Jan 1964

5340-14-227-7908
Rod End Clevis

142277908
NO PRIMARY REF14-227-7908: RNCC: 3 | RNVC: 2
2J6208: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-339-5072
Access Cover

143395072
461-10578-000: RNCC: 3 | RNVC: 2
461-10578-000: RNCC: 5 | RNVC: 2

18 Jan 1977

5340-14-529-5611
Mounting Bracket

145295611
330A68-1732-61: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-293-3969
Retaining Strap

142933969
NO PRIMARY REF14-293-3969: RNCC: 3 | RNVC: 2
9560110630: RNCC: 5 | RNVC: 2
0400410130: RNCC: 5 | RNVC: 2
53396: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-517-6630
Butt Hinge

145176630
MS7524-2C1830: RNCC: 3 | RNVC: 2
MS7524-2C1830: RNCC: 5 | RNVC: 2
MS7524-2C: RNCC: 5 | RNVC: 2
MS7524-2C: RNCC: 5 | RNVC: 2

5 Jan 2000

5340-14-521-1079
Arched Cushion

145211079
MAT169-0027F18DE66: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-14-335-7904
Detent Plunger

143357904
330A25-2221-20: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-438-6802
Plate Spacer

144386802
DHS756-132-10: RNCC: 3 | RNVC: 2

28 Mar 1990

5340-14-517-0307
Loop Clamp

145170307
51411905006: RNCC: 3 | RNVC: 2
28P6: RNCC: 5 | RNVC: 2
51411919006: RNCC: 5 | RNVC: 2
85-693-1686: RNCC: 6 | RNVC: 9

28 Oct 1999

5340-14-326-9748
Access Cover

143269748
1899-03-04-04: RNCC: 3 | RNVC: 2
041076: RNCC: 5 | RNVC: 2
1899-03T04-04: RNCC: 5 | RNVC: 2
41076: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-512-5499
Section Block Clamp

145125499
F706-87-02: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-323-7499
Butt Hinge

143237499
262-10-22733-01: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-518-8751
Cover Strip

145188751
332A22-0110-JV: RNCC: 3 | RNVC: 2

23 Feb 2000

5340-14-548-1001
Access Cover

145481001
A46447-112: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-388-8129
Retaining Strap

143888129
11-982-700: RNCC: 3 | RNVC: 2
11-982-700: RNCC: 5 | RNVC: 9

29 Nov 1983

5340-14-505-7423
Bow Handle

145057423
20808-088: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-527-0319
Angle Bracket

145270319
47139499: RNCC: 3 | RNVC: 2
IF-192-0235: RNCC: 5 | RNVC: 2
IF-192-0235: RNCC: 5 | RNVC: 9

26 Sep 2001

5340-14-425-0109
Runner

144250109
JVCIT00-09-00: RNCC: 3 | RNVC: 2
89407032: RNCC: 5 | RNVC: 2

16 Jun 1988

5340-14-419-0217
Expansion Plug

144190217
E29584-36AT: RNCC: 2 | RNVC: 2

29 Sep 1987

5340-14-326-2747
Detent Plunger

143262747
330A95-0187-20: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-452-9835
Mounting Plate

144529835
761637: RNCC: 3 | RNVC: 2
85-694-0158: RNCC: 6 | RNVC: 9

29 Jan 1992

5340-14-457-4418
Handwheel

144574418
NO PRIMARY REF14-457-4418: RNCC: 3 | RNVC: 2
189857: RNCC: 5 | RNVC: 9

3 Sep 1992

5340-14-512-5468
Section Block Clamp

145125468
F704-73-01M1: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-345-2887
Threaded Rod End

143452887
FB1A880-21810: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-316-1548
Synchro Clamp

143161548
NO PRIMARY REF14-316-1548: RNCC: 3 | RNVC: 2
C125003: RNCC: 5 | RNVC: 9
125003: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-383-9104
Access Cover

143839104
3511 180 90521: RNCC: 3 | RNVC: 2
3511 180 90521: RNCC: 5 | RNVC: 2
3511-180-90521: RNCC: 5 | RNVC: 2

11 Apr 1983

5340-14-519-0979
Mounting Bracket

145190979
139E335-00: RNCC: 3 | RNVC: 2
139E335-00: RNCC: 5 | RNVC: 9

7 Mar 2000

5340-14-542-8962
Mounting Bracket

145428962
708110S560-00B: RNCC: 3 | RNVC: 2

14 Aug 2004

5340-14-399-8763
Clamping Catch

143998763
GE.18-IP: RNCC: 3 | RNVC: 2
GE18IB: RNCC: 5 | RNVC: 2

11 Apr 1985

5340-14-369-5013
Retaining Strap

143695013
485-102-321-0: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-204-7490
Angle Bracket

142047490
644-1531: RNCC: 3 | RNVC: 2
840A: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-14-480-7517
Access Cover

144807517
90 14 68: RNCC: 3 | RNVC: 2

28 Mar 1996

5340-14-357-5710
Retaining Strap

143575710
15174656: RNCC: 3 | RNVC: 2
15174656: RNCC: 5 | RNVC: 2

7 Jun 1979

5340-14-544-8382
Mounting Bracket

145448382
9516710D: RNCC: 3 | RNVC: 2

1 Mar 2005

5340-14-464-3103
Retaining Strap

144643103
45072092: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-515-4051
Mounting Plate

145154051
21082021F: RNCC: 3 | RNVC: 2
21082021: RNCC: 5 | RNVC: 2

13 Jul 1999

5340-14-547-3919
Mounting Bracket

145473919
PDE543SU001: RNCC: 3 | RNVC: 2

11 Oct 2005

5340-14-435-2422
Loop Clamp

144352422
431460: RNCC: 3 | RNVC: 2

31 Oct 1989

5340-14-489-0518
Metal Grille

144890518
1277 94A5455: RNCC: 3 | RNVC: 2
1277 94A5455: RNCC: 5 | RNVC: 9

18 Jun 1997

5340-14-216-6880
Retaining Strap

142166880
6661: RNCC: 3 | RNVC: 9
6661: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-433-9429
Mounting Bracket

144339429
0301501090: RNCC: 3 | RNVC: 2

23 Aug 1989

5340-14-451-2885
Permanent Magnet

144512885
108065150201: RNCC: 3 | RNVC: 2

6 Nov 1991

5340-14-472-9715
Angle Bracket

144729715
38660706: RNCC: 3 | RNVC: 2
38660706: RNCC: 5 | RNVC: 9

23 Nov 1994

5340-14-550-9178
Angle Bracket

145509178
RA1B701876393: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-326-7449
Handwheel

143267449
14506A: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-542-2689
Mounting Bracket

145422689
921605408: RNCC: 3 | RNVC: 2
921605408: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-518-9779
Mounting Bracket

145189779
700120: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-548-5669
Bridge Clamp

145485669
K70090572: RNCC: 3 | RNVC: 2
5001864927: RNCC: 3 | RNVC: 2

26 Jan 2006

5340-14-535-4262
Loop Clamp

145354262
7705005268: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-533-9832
Mounting Bracket

145339832
10662860: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-504-3216
Mounting Bracket

145043216
3762860M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-514-6144
Mounting Bracket

145146144
26058804135: RNCC: 3 | RNVC: 2

2 Jun 1999

5340-14-497-5176
Mounting Plate

144975176
D200150010: RNCC: 3 | RNVC: 2
F300 0T 023 2954: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-450-5019
Mounting Bracket

144505019
5000988772: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-14-445-1523
Mounting Plate

144451523
BLC235158: RNCC: 3 | RNVC: 2

4 Feb 1991

5340-14-500-7374
Mounting Bracket

145007374
996390: RNCC: 3 | RNVC: 2
996390: RNCC: 5 | RNVC: 2
F300 0T 024 7571: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-546-2928
Mounting Bracket

145462928
10477264: RNCC: 3 | RNVC: 2

22 Jun 2005

5340-14-470-3259
Mounting Bracket

144703259
202837: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-031-9767
Loop Clamp

140319767
21S6-24: RNCC: 3 | RNVC: 2
21S6-24: RNCC: 5 | RNVC: 2

5 Jul 1980

5340-14-399-1132
Leaf Spring

143991132
5000706986: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-529-8912
Mounting Bracket

145298912
10609907: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-434-3608
Blank Panel

144343608
39225372: RNCC: 3 | RNVC: 2
39225372: RNCC: 5 | RNVC: 9

20 Sep 1989

5340-14-551-5086
Turnbuckle Body

145515086
RA1M164000001: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-397-8981
Plug Button

143978981
20766223-0: RNCC: 3 | RNVC: 2
766223: RNCC: 5 | RNVC: 2
MC310: RNCC: 5 | RNVC: 2

31 Jan 1985

5340-14-529-3055
Mounting Plate

145293055
MB4060F00: RNCC: 3 | RNVC: 2

20 Mar 2002

5340-14-442-7223
Angle Bracket

144427223
ST406M96P51: RNCC: 3 | RNVC: 2

29 Oct 1990

5340-14-539-4151
Access Cover

145394151
788-5: RNCC: 3 | RNVC: 2

14 Jan 2004

5340-14-391-9923
Access Cover

143919923
914-1: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-446-1204
Bumper

144461204
576351: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-442-2385
Loop Clamp

144422385
51323102005: RNCC: 3 | RNVC: 2
21GE5: RNCC: 5 | RNVC: 2

3 Oct 1990

5340-14-381-1652
Angle Bracket

143811652
2206-411A461: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-452-0455
Mounting Plate

144520455
A60913-1: RNCC: 3 | RNVC: 2

18 Dec 1991

5340-14-458-5939
Bumper

144585939
PL1NB0100A100011: RNCC: 3 | RNVC: 2

28 Oct 1992

5340-14-457-0224
Mounting Plate

144570224
TS120201-1: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-14-401-2927
Mounting Plate

144012927
222291: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-514-5776
Mounting Bracket

145145776
701988: RNCC: 3 | RNVC: 2

1 Jun 1999

5340-14-523-0249
Angle Bracket

145230249
47139294: RNCC: 3 | RNVC: 2

18 Dec 2000

5340-14-533-3488
Cover Strip

145333488
12-250-326: RNCC: 3 | RNVC: 2
SZ12.250.326: RNCC: 3 | RNVC: 2

31 Jan 2003

5340-14-348-6775
Angle Bracket

143486775
420101: RNCC: 3 | RNVC: 2
420101: RNCC: 5 | RNVC: 9

19 Apr 1978

5340-14-375-3510
Access Cover

143753510
16985503: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-369-9507
Access Cover

143699507
398102070401: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-543-2043
Mounting Bracket

145432043
X25987: RNCC: 3 | RNVC: 2

31 Aug 2004

5340-14-526-0274
Mounting Bracket

145260274
3424056: RNCC: 3 | RNVC: 2
8012261Y00: RNCC: 5 | RNVC: 2
3424056: RNCC: 5 | RNVC: 2

28 Jun 2001

5340-14-352-5482
Pipe Hanger

143525482
A11A221272008: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-428-5541
Angle Bracket

144285541
MKG4592102: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-313-1697
Butt Hinge

143131697
M020797: RNCC: 3 | RNVC: 2
M020797: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-238-0453
Retaining Strap

142380453
052320: RNCC: 3 | RNVC: 9

1 Jan 1967

5340-14-455-7328
Loop Clamp

144557328
5000821309: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-518-9694
Mounting Plate

145189694
704944: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-202-3135
Loop Clamp

142023135
STD55: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-409-5953
Angle Bracket

144095953
TS99327: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-548-9214
Shelf Bracket

145489214
10711819000: RNCC: 3 | RNVC: 2

23 Feb 2006

5340-14-519-1988
Metal Grille

145191988
1SH41598368: RNCC: 3 | RNVC: 2

14 Mar 2000

5340-14-413-6961
Angle Bracket

144136961
T0P7V5: RNCC: 3 | RNVC: 2
TOP7V5: RNCC: 5 | RNVC: 2

15 Jan 1987

5340-14-552-8953
Mounting Bracket

145528953
S261A1013105: RNCC: 3 | RNVC: 2

12 Feb 2007

5340-14-412-8634
Retaining Strap

144128634
ST406M52P641: RNCC: 3 | RNVC: 2

5 Nov 1986

5340-14-440-3197
Mounting Bracket

144403197
332A58-4581-20: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-510-7375
Eye Hook

145107375
3L06-038: RNCC: 3 | RNVC: 2

10 Nov 1998

5340-14-374-7628
Mounting Plate

143747628
1-1300AA00-07: RNCC: 3 | RNVC: 9
1-1300AA00-07: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-530-9313
Angle Bracket

145309313
SMC-S-16900-010-0: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-14-537-6244
Mounting Bracket

145376244
840-1-84-100: RNCC: 3 | RNVC: 2

12 Nov 2003

5340-14-480-4329
Mounting Plate

144804329
399-005-062-0: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-539-2452
Mounting Bracket

145392452
21169218-00: RNCC: 3 | RNVC: 2
21169218-7: RNCC: 5 | RNVC: 2

17 Dec 2003

5340-14-486-2497
Mounting Plate

144862497
282-1-H-161: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-485-9991
Cover Strip

144859991
ST159-2M365P37-4: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-359-1431
Block Clamp

143591431
A11A704101080: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-316-8533
Pipe Hanger

143168533
30102: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-383-5165
Retaining Strap

143835165
20189935: RNCC: 3 | RNVC: 2
20189935: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-500-7861
Section Block Clamp

145007861
E64009998035: RNCC: 3 | RNVC: 2
F300 0T 024 8061: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-500-0353
Mounting Plate

145000353
262443: RNCC: 3 | RNVC: 2
F300 0T 024 0324: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-552-4949
Mounting Bracket

145524949
S070V1001121: RNCC: 3 | RNVC: 2

9 Jan 2007

5340-14-507-3407
Runner

145073407
1002554: RNCC: 3 | RNVC: 2
1002554: RNCC: 5 | RNVC: 9

29 Jun 1998

5340-14-237-4913
Rod End Clevis

142374913
3210-21010-514: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-541-6264
Utility Access Door

145416264
1091111-001: RNCC: 3 | RNVC: 2

15 Jun 2004

5340-14-452-0775
Mounting Bracket

144520775
90-06-026-5: RNCC: 3 | RNVC: 9

18 Dec 1991

5340-14-542-0128
Mounting Plate

145420128
20045-522: RNCC: 3 | RNVC: 2
502112005002A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-420-6343
Detent Plunger

144206343
7199-315-1P7199-317: RNCC: 3 | RNVC: 2

16 Dec 1987

5340-14-370-1951
Angle Bracket

143701951
366A58-1011-20: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-280-4007
Furniture Leg Tip

142804007
363-0124: RNCC: 3 | RNVC: 2
91000626: RNCC: 5 | RNVC: 2
D139: RNCC: 5 | RNVC: 2
TL1261: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-254-2591
Access Cover

142542591
NO PRIMARY REF14-254-2591: RNCC: 3 | RNVC: 2
2-145158-2: RNCC: 5 | RNVC: 9
145158: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-341-8145
Access Cover

143418145
PE2-005-324: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-547-7000
Mounting Bracket

145477000
3-85-31-02-113-06: RNCC: 3 | RNVC: 2

3 Nov 2005

5340-14-486-2482
Mounting Plate

144862482
282-1-E-101: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-304-7254
Mounting Plate

143047254
NO PRIMARY REF14-304-7254: RNCC: 3 | RNVC: 2
105827-002: RNCC: 5 | RNVC: 9
105827-2: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-360-4714
Loop Clamp

143604714
NO PRIMARY REF14-360-4714: RNCC: 3 | RNVC: 2
1XSPAL3010ULAS: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-440-7145
Mounting Plate

144407145
3704MRC5-04: RNCC: 3 | RNVC: 2

18 Jul 1990

5340-14-315-0346
Mounting Plate

143150346
NO PRIMARY REF14-315-0346: RNCC: 3 | RNVC: 2
64H0010DET39: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-569-1305
Utility Resilient Mount

145691305
MP14-270: RNCC: 3 | RNVC: 2

11 Aug 2011

5340-14-464-3989
Loop Clamp

144643989
NO PRIMARY REF14-464-3989: RNCC: 3 | RNVC: 2
146730: RNCC: 5 | RNVC: 9

28 Jul 1993

5340-14-484-7760
Access Cover

144847760
CCN301-420-415A2EQU: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-370-6133
Access Cover

143706133
5200-080: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-278-1290
Loop Clamp

142781290
NO PRIMARY REF14-278-1290: RNCC: 3 | RNVC: 2
85825: RNCC: 5 | RNVC: 9
85825: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-384-1045
Mounting Plate

143841045
4335-189A10321: RNCC: 3 | RNVC: 9
189-10321: RNCC: 5 | RNVC: 9

4 May 1983

5340-14-410-5135
Loop Clamp

144105135
51313105040: RNCC: 3 | RNVC: 2
21G40: RNCC: 5 | RNVC: 2
85-801-1424: RNCC: 6 | RNVC: 9

2 Jul 1986

5340-14-533-8028
Mounting Bracket

145338028
168E379-00: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-513-6098
Mounting Plate

145136098
332A54-1118-03: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-14-512-5538
Section Block Clamp

145125538
F762-30-01: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-340-2666
Access Cover

143402666
NO PRIMARY REF14-340-2666: RNCC: 3 | RNVC: 2
D40-22314: RNCC: 5 | RNVC: 9

14 Feb 1977

5340-14-479-1376
Plug Button

144791376
332A13-1526-20: RNCC: 3 | RNVC: 2

13 Dec 1995

5340-14-344-0520
Compression Cup

143440520
GSM171-111F11: RNCC: 3 | RNVC: 2

13 Jul 1977

5340-14-533-9782
Mounting Plate

145339782
452-15740-000: RNCC: 3 | RNVC: 2
452-15740-000: RNCC: 5 | RNVC: 2

5 Mar 2003

5340-14-377-4535
Threaded Rod End

143774535
2311014: RNCC: 3 | RNVC: 2
53842311014: RNCC: 5 | RNVC: 9
2311014: RNCC: 5 | RNVC: 9
53842311014: RNCC: 5 | RNVC: 9
85-689-5645: RNCC: 6 | RNVC: 9

17 May 1982

5340-14-378-8645
Webbing Strap

143788645
000053: RNCC: 3 | RNVC: 2
000053: RNCC: 5 | RNVC: 9
HO-214A: RNCC: 6 | RNVC: 9

6 Sep 1982

5340-14-554-8302
Bumper

145548302
5848-0003: RNCC: 3 | RNVC: 2

29 Aug 2007

5340-14-444-8149
Bridge Clamp

144448149
SMS80AA0-45: RNCC: 3 | RNVC: 2

22 Jan 1991

5340-14-520-0832
Loop Clamp

145200832
3-22609-11-32A: RNCC: 3 | RNVC: 2
3-22609-11-32A: RNCC: 5 | RNVC: 2

10 May 2000

5340-14-550-5137
Mounting Bracket

145505137
RA1M702201203N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-540-3032
Bumper

145403032
BAZ4351: RNCC: 3 | RNVC: 2

18 Mar 2004

5340-14-476-3303
Loop Clamp

144763303
5005005054: RNCC: 3 | RNVC: 2
LN418PA: RNCC: 3 | RNVC: 2
LN418PA: RNCC: 5 | RNVC: 2

7 Jun 1995

5340-14-488-2539
Mounting Bracket

144882539
0174041720: RNCC: 3 | RNVC: 2

23 Apr 1997

5340-14-519-4927
Mounting Plate

145194927
10306702: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-458-5145
Blank Panel

144585145
39233932: RNCC: 3 | RNVC: 2
39233932: RNCC: 5 | RNVC: 9

23 Oct 1992

5340-14-381-4785
Access Cover

143814785
398002182000: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-351-3081
Retaining Strap

143513081
19301600: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-481-5274
Swivel Caster

144815274
1381-8NEAB: RNCC: 3 | RNVC: 9
MPR1381-8NEAB: RNCC: 5 | RNVC: 9
1381-0856: RNCC: 5 | RNVC: 9

15 May 1996

5340-14-537-4638
Mounting Bracket

145374638
038591R: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-456-3919
Loop Clamp

144563919
IN0110: RNCC: 3 | RNVC: 2

2 Jul 1992

5340-14-457-5610
Angle Bracket

144575610
304209: RNCC: 3 | RNVC: 2
304209: RNCC: 5 | RNVC: 9

10 Sep 1992

5340-14-516-2188
Butt Hinge

145162188
0020420: RNCC: 3 | RNVC: 2

15 Sep 1999

5340-14-366-9387
Clamping Catch

143669387
GR63IB: RNCC: 3 | RNVC: 2
0216874L00: RNCC: 5 | RNVC: 2

11 Dec 1980

5340-14-420-7258
Mounting Plate

144207258
6261-01112: RNCC: 3 | RNVC: 2

16 Dec 1987

5340-14-535-2381
Mounting Bracket

145352381
6501PSE100003: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-031-0303
Butt Hinge

140310303
NO PRIMARY REF14-031-0303: RNCC: 3 | RNVC: 2
050246: RNCC: 5 | RNVC: 9

14 Jun 1980

5340-14-375-2554
Access Cover

143752554
10-202-01-02: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-359-1608
Loop Clamp

143591608
55212-450-000BGZ: RNCC: 3 | RNVC: 2
55212-450BGZ: RNCC: 5 | RNVC: 2

7 Sep 1979

5340-14-328-6887
Access Cover

143286887
M208-28020: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-421-1150
Bow Handle

144211150
66-5837-019: RNCC: 3 | RNVC: 2

6 Jan 1988

5340-14-364-0935
Mounting Bracket

143640935
366A24-0100-44: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-551-4268
Strap Hinge

145514268
708010S112-24A: RNCC: 3 | RNVC: 2

20 Sep 2006

5340-14-552-1658
Access Cover

145521658
F1451302: RNCC: 3 | RNVC: 2

29 Nov 2006

5340-14-549-8058
Mounting Bracket

145498058
2092650: RNCC: 3 | RNVC: 2

15 May 2006

5340-14-330-2544
Mending Plate

143302544
11213: RNCC: 3 | RNVC: 9

2 Jul 1975

5340-14-438-5994
Loop Clamp

144385994
112APP: RNCC: 3 | RNVC: 2
RAB2733: RNCC: 5 | RNVC: 2
116201-120: RNCC: 5 | RNVC: 2
V950511: RNCC: 5 | RNVC: 2

28 Mar 1990

5340-14-224-7518
Lock-Release Lever

142247518
E21412MANETTEDR0ITEDE100CARRE10: RNCC: 2 | RNVC: 2

1 Jan 1966

5340-14-534-8857
Retaining Strap

145348857
56293792: RNCC: 3 | RNVC: 2

11 Apr 2003

5340-14-512-7489
Plug Button

145127489
800033676: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-548-1131
Mounting Bracket

145481131
RA1A704536841: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-500-8207
Section Block Clamp

145008207
E64009998066: RNCC: 3 | RNVC: 2
F300 0T 024 8409: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-455-4029
Mounting Plate

144554029
EDM0961: RNCC: 3 | RNVC: 2
91360551: RNCC: 5 | RNVC: 2

21 May 1992

5340-14-570-2101
Utility Access Door

145702101
MW1327A00: RNCC: 3 | RNVC: 2

29 Nov 2011

5340-14-548-8822
Access Cover

145488822
PA01583A: RNCC: 3 | RNVC: 2
9520011817: RNCC: 5 | RNVC: 2

21 Feb 2006

5340-14-550-9021
Rod End Clevis

145509021
6801FDD120: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-224-4188
Loop Clamp

142244188
51111905021: RNCC: 3 | RNVC: 2
25P21: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-454-0742
Retaining Strap

144540742
16130175: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-523-4907
Cover Strip

145234907
00-250-293: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-14-508-2494
Angle Bracket

145082494
5010120348: RNCC: 3 | RNVC: 2
321103A30444: RNCC: 5 | RNVC: 2

2 Sep 1998

5340-14-439-4162
Cover Strip

144394162
DA2C721225110: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-545-9919
Bail Handle

145459919
19223356: RNCC: 3 | RNVC: 2

2 Jun 2005

5340-14-545-3712
Mounting Bracket

145453712
T536G1001803: RNCC: 3 | RNVC: 2

8 Apr 2005

5340-14-222-7106
Bow Handle

142227106
KT6680: RNCC: 3 | RNVC: 2
KT6680: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-507-6877
Blank Panel

145076877
10473987: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-412-5245
Webbing Strap

144125245
640966: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-14-362-1733
Quick Release Pin

143621733
C1-46221: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-485-3161
Retaining Strap

144853161
VAT513-002: RNCC: 3 | RNVC: 2

15 Jan 1997

5340-14-486-2517
Threaded Rod End

144862517
282-1-O-103: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-369-9844
Angle Bracket

143699844
AM5-2-8-15: RNCC: 3 | RNVC: 2
5412215: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-509-8044
Access Cover

145098044
1600-101-226-04: RNCC: 3 | RNVC: 2
1560AA0012056: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-335-9950
Retaining Strap

143359950
481-226-081-0: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-488-8131
Access Cover

144888131
815-1-61-838: RNCC: 3 | RNVC: 2

4 Jun 1997

5340-14-257-9254
Angle Bracket

142579254
NO PRIMARY REF14-257-9254: RNCC: 3 | RNVC: 2
C692767-1A: RNCC: 5 | RNVC: 9
642016-1: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-373-7317
Rod End Clevis

143737317
403-702-151-0: RNCC: 3 | RNVC: 2

13 Nov 1981

5340-14-381-5859
Container Adapter

143815859
CG123-1-11: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-444-0690
Quick Release Pin

144440690
16-080-052: RNCC: 3 | RNVC: 2

18 Dec 1990

5340-14-510-8657
Access Cover

145108657
309-102-401-0: RNCC: 3 | RNVC: 2

18 Nov 1998

5340-14-511-6461
Mounting Bracket

145116461
1-625-08-09: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-424-9676
Access Door Hinge

144249676
180 CAMION-140X55 CARRE GAUCHE: RNCC: 3 | RNVC: 2

16 Jun 1988

5340-14-356-0478
Angle Bracket

143560478
NO PRIMARY REF14-356-0478: RNCC: 3 | RNVC: 2
10771-4: RNCC: 5 | RNVC: 9

5 Apr 1979

5340-14-218-3117
Retaining Strap

142183117
3160S73-26-545: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-525-0881
Mounting Bracket

145250881
2272-113-000: RNCC: 3 | RNVC: 2
2272-113-000: RNCC: 5 | RNVC: 2

18 May 2001

5340-14-330-3498
Access Cover

143303498
NO PRIMARY REF14-330-3498: RNCC: 3 | RNVC: 2
076462D: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-495-0410
Mounting Bracket

144950410
AS2-0.001.737: RNCC: 3 | RNVC: 2
93035793000: RNCC: 5 | RNVC: 2
F300 0T 018 2576: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-410-2878
Butt Hinge

144102878
330A25-2161-04: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-14-260-2020
Plug Button

142602020
3210-32-13-610: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-514-9022
Loop Clamp

145149022
FLEXIN0X182-20: RNCC: 3 | RNVC: 2
SERFLEXIN0X182-20: RNCC: 5 | RNVC: 9

23 Jun 1999

5340-14-484-8154
Access Cover

144848154
332P64-3006-07: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-338-5686
Access Cover

143385686
M371-02151: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-251-6539
Loop Clamp

142516539
9121494000: RNCC: 3 | RNVC: 2
9-121494-000: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-403-8346
Rod End Clevis

144038346
ST159-2M764-2P131: RNCC: 3 | RNVC: 2
ST159-2M764-2P131A: RNCC: 5 | RNVC: 2

28 Aug 1985

5340-14-522-9073
Mounting Plate

145229073
500-75-00-11: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-14-217-9093
Cover Strip

142179093
3160S25-22-034: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-244-9828
Clamping Catch

142449828
NO PRIMARY REF14-244-9828: RNCC: 3 | RNVC: 2
13697B: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-420-4767
Webbing Strap

144204767
NO PRIMARY REF14-420-4767: RNCC: 3 | RNVC: 2
4258-3: RNCC: 5 | RNVC: 9

10 Dec 1987

5340-14-384-1838
Rod End Clevis

143841838
063W25-000000-28A1: RNCC: 3 | RNVC: 2
0070949D00: RNCC: 5 | RNVC: 2

4 May 1983

5340-14-465-9680
Synchro Clamp

144659680
3511 318 56311: RNCC: 3 | RNVC: 2
3511-318-56311: RNCC: 5 | RNVC: 2

26 Oct 1993

5340-14-473-6571
Runner

144736571
332A61-3565-20: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-437-4582
Swivel Caster

144374582
332A91-0026-50: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-453-9230
Caster Frame

144539230
MS-S100-511: RNCC: 3 | RNVC: 9

14 Mar 1992

5340-14-259-5120
Runner

142595120
RU761-43M311-1P2D: RNCC: 3 | RNVC: 2
761-43M311-1P2D: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-366-6193
Access Cover

143666193
MBEU67162: RNCC: 3 | RNVC: 2
034295: RNCC: 5 | RNVC: 2
99-648-2231: RNCC: 6 | RNVC: 9

20 Nov 1980

5340-14-356-5400
Anchor Strap

143565400
T20-13C297: RNCC: 3 | RNVC: 2

15 May 1979

5340-14-334-5045
Mending Plate

143345045
M208-47010: RNCC: 3 | RNVC: 2
M208-42010: RNCC: 5 | RNVC: 2

1 Jun 1976

5340-14-517-8920
Access Cover

145178920
1358-206-130: RNCC: 3 | RNVC: 2

17 Jan 2000

5340-14-498-9604
Plug Button

144989604
MB700-050: RNCC: 3 | RNVC: 2
MB700-050: RNCC: 3 | RNVC: 9
MB700-050: RNCC: 5 | RNVC: 9
5000293715: RNCC: 5 | RNVC: 9
F300 0T 014 1287: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-456-7946
Plug Button

144567946
249-011: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-14-438-4818
Mounting Bracket

144384818
332A61-1862-01: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-428-2912
Loop Clamp

144282912
455047-004: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-351-9805
Rod End Clevis

143519805
NO PRIMARY REF14-351-9805: RNCC: 3 | RNVC: 2
1608036: RNCC: 5 | RNVC: 9

16 Oct 1978

5340-14-368-6388
Rod End Clevis

143686388
BP4456008: RNCC: 3 | RNVC: 2
BP4456-008: RNCC: 5 | RNVC: 2

20 Feb 1981

5340-14-031-9265
Retaining Strap

140319265
501-804-651-0: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-406-4424
Rod End Clevis

144064424
F293-13602: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-360-7253
Anchor Strap

143607253
650-15771-01-94: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-296-3205
Loop Clamp

142963205
NO PRIMARY REF14-296-3205: RNCC: 3 | RNVC: 2
F11PA3121-064: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-391-7890
Runner

143917890
V2PM3242-119513: RNCC: 3 | RNVC: 2
V2PM3242-119513: RNCC: 5 | RNVC: 2

21 Mar 1984

5340-14-293-1875
Loop Clamp

142931875
51215302008: RNCC: 3 | RNVC: 2
A0021-20S08: RNCC: 5 | RNVC: 2
20S8: RNCC: 5 | RNVC: 2
A0021-20S08: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-548-1026
Access Cover

145481026
A46447-92: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-446-8412
Retaining Strap

144468412
365A81-0361-10: RNCC: 3 | RNVC: 2

17 Apr 1991

5340-14-419-5422
Locking Stay

144195422
M208-61027: RNCC: 3 | RNVC: 2

21 Oct 1987

5340-14-340-4225
Loop Clamp

143404225
131-8524-083: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-335-7865
Pipe Hanger

143357865
330A72-5008-00: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-346-9404
Rod End Clevis

143469404
341A84-1062-00: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-14-495-1688
Access Cover

144951688
NO PRIMARY REF14-495-1688: RNCC: 3 | RNVC: 2
CH256025: RNCC: 5 | RNVC: 9
F300 0T 018 6068: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-275-2667
Cover Strip

142752667
M3C232-25-812: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-497-1950
Mounting Bracket

144971950
02-A13006300: RNCC: 3 | RNVC: 2
02/A13006300: RNCC: 3 | RNVC: 2
F300 0T 022 8078: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-501-2120
Mounting Plate

145012120
412416-201-22-03-90: RNCC: 3 | RNVC: 2
412416-201.22.03.90: RNCC: 3 | RNVC: 2
F300 0T 025 2525: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-257-1464
Mounting Bracket

142571464
330A25-2177-20: RNCC: 3 | RNVC: 2
330A25-2177-2000: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-312-7555
Rim Lock Set

143127555
NO PRIMARY REF14-312-7555: RNCC: 3 | RNVC: 2
1700-11-1729B1: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-332-4915
Pipe Hanger

143324915
F10A123116009: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-399-0458
Clamping Catch

143990458
407852: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-450-4362
Stand Base

144504362
1555730: RNCC: 3 | RNVC: 2
1555730: RNCC: 5 | RNVC: 2

9 Oct 1991

5340-14-435-9363
Elastic Strap

144359363
CR001PD080021: RNCC: 3 | RNVC: 9

29 Nov 1989

5340-14-485-6436
Angle Bracket

144856436
46021042: RNCC: 3 | RNVC: 2
46021042: RNCC: 5 | RNVC: 2

6 Feb 1997

5340-14-350-4657
Angle Bracket

143504657
215860: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-407-9926
Plug Button

144079926
M4Z7301424401: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-520-7752
Mounting Bracket

145207752
T537A2004107: RNCC: 3 | RNVC: 2

14 Jun 2000

5340-14-411-2384
Angle Bracket

144112384
0292103680: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-405-2232
Bumper

144052232
3657: RNCC: 3 | RNVC: 9
3657: RNCC: 5 | RNVC: 9

27 Nov 1985

5340-14-431-6125
Angle Bracket

144316125
10270-275: RNCC: 3 | RNVC: 9
89408332: RNCC: 5 | RNVC: 2

26 Apr 1989

5340-14-545-3647
Pipe Hanger

145453647
T075G1001121: RNCC: 3 | RNVC: 2

8 Apr 2005

5340-14-503-1596
Cover Strip

145031596
RA1M228870251A1: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-448-0197
Metal Grille

144480197
PM1A231144: RNCC: 3 | RNVC: 2
PM1A231144: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-550-4794
Angle Bracket

145504794
RA1A702856115: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-462-1950
Angle Bracket

144621950
5010037490: RNCC: 3 | RNVC: 2
5000541475: RNCC: 5 | RNVC: 2

15 Apr 1993

5340-14-462-9014
Angle Bracket

144629014
1DM165055: RNCC: 3 | RNVC: 2
91714227: RNCC: 5 | RNVC: 2

5 May 1993

5340-14-462-9286
Webbing Strap

144629286
1300641: RNCC: 3 | RNVC: 2
1300641: RNCC: 5 | RNVC: 9
SDM1300641: RNCC: 5 | RNVC: 9

7 May 1993

5340-14-413-1721
Angle Bracket

144131721
132274: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-484-7717
Rim Lock Set

144847717
9019CPVT102244: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-547-9759
Angle Bracket

145479759
RA1M701346501: RNCC: 3 | RNVC: 2

30 Nov 2005

5340-14-352-7925
Bow Handle

143527925
61391: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-512-3037
Runner

145123037
2022670M: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-14-456-2450
Pipe Hanger

144562450
0000758841: RNCC: 3 | RNVC: 2

25 Jun 1992

5340-14-379-6335
Timber Ring

143796335
01288486: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-381-9457
Bumper

143819457
17121-38: RNCC: 3 | RNVC: 2
17121-38: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-415-7875
Tubular Fairlead

144157875
VTR401REP1063: RNCC: 3 | RNVC: 9
VTR401REP1063: RNCC: 5 | RNVC: 9

18 May 1987

5340-14-545-0093
Bumper

145450093
180025: RNCC: 3 | RNVC: 2

14 Mar 2005

5340-14-547-5176
Angle Bracket

145475176
RA1B701325165: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-459-7349
Loop Holder

144597349
LN321022REP12LAG3-L32X32X3: RNCC: 3 | RNVC: 2
RAB0199: RNCC: 5 | RNVC: 2

15 Dec 1992

5340-14-374-6512
Bumper

143746512
70069: RNCC: 3 | RNVC: 2
11201: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-549-4945
Mounting Bracket

145494945
MC201-215161-30: RNCC: 3 | RNVC: 2

11 Apr 2006

5340-14-504-6543
Control Rod

145046543
LS08-007-04: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-14-512-5168
Mounting Bracket

145125168
SUPPO00430X00: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-419-9158
Retaining Strap

144199158
160G7X6: RNCC: 3 | RNVC: 2

10 Nov 1987

5340-14-435-9402
Mounting Bracket

144359402
20111181: RNCC: 3 | RNVC: 2
20111181: RNCC: 5 | RNVC: 9

29 Nov 1989

5340-14-369-7918
Bail Handle

143697918
LH91114: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-453-4262
Flush Lock

144534262
SAF8109-2: RNCC: 3 | RNVC: 2
SAF8109-2: RNCC: 5 | RNVC: 2

19 Feb 1992

5340-14-555-2210
Mounting Bracket

145552210
82357963000: RNCC: 3 | RNVC: 2

10 Oct 2007

5340-14-489-6890
Angle Bracket

144896890
332P87-1027-19: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-382-8293
Bumper

143828293
C3526-002F15: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-510-6960
Mounting Plate

145106960
NO PRIMARY REF14-510-6960: RNCC: 3 | RNVC: 2
08612-62-0/D5482: RNCC: 5 | RNVC: 2

4 Nov 1998

5340-14-397-4058
Access Cover

143974058
216423: RNCC: 3 | RNVC: 2
R182004-07: RNCC: 5 | RNVC: 2

14 Dec 1984

5340-14-449-8274
Angle Bracket

144498274
993-02-02-05: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-14-232-4629
Bumper

142324629
330-0124: RNCC: 3 | RNVC: 2
PTT330-0124: RNCC: 3 | RNVC: 2
E2566RP: RNCC: 3 | RNVC: 2
330-0124: RNCC: 3 | RNVC: 9
W1095: RNCC: 5 | RNVC: 2
E2566R: RNCC: 5 | RNVC: 2
N256-10: RNCC: 5 | RNVC: 9
7499: RNCC: 5 | RNVC: 9
DE775: RNCC: 5 | RNVC: 9
DE775A: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-369-1306
Mortise Lock Set

143691306
NO PRIMARY REF14-369-1306: RNCC: 3 | RNVC: 2
2064-1: RNCC: 5 | RNVC: 9

17 Apr 1981

5340-14-569-7172
Utility Resilient Mount

145697172
H76878-01/3/1: RNCC: 3 | RNVC: 2

17 Oct 2011

5340-14-464-8288
Mortise Lock Set

144648288
484A-2-15N: RNCC: 3 | RNVC: 2

1 Sep 1993

5340-14-389-4642
Angle Bracket

143894642
365A58-1036-22: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-348-4670
Loop Clamp

143484670
RS114-15: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-361-7881
Rigid Caster

143617881
TF2BA050-36L: RNCC: 3 | RNVC: 2
TR2-50-26LP0: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-14-307-5112
Angle Bracket

143075112
E4M703-18-803: RNCC: 3 | RNVC: 2
85-666-9000: RNCC: 6 | RNVC: 9

1 Jan 1974

5340-14-361-8693
Rigid Caster

143618693
BRR1-30-910: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-474-7709
Mounting Bracket

144747709
NO PRIMARY REF 14-474-7709: RNCC: 3 | RNVC: 2
PLAN229255: RNCC: 5 | RNVC: 9
229255: RNCC: 5 | RNVC: 9

1 Mar 1995

5340-14-417-2924
Swivel Caster

144172924
TP3BA063-23L: RNCC: 3 | RNVC: 2
85-692-8800: RNCC: 6 | RNVC: 9

1 Jul 1987

5340-14-464-1029
Mounting Bracket

144641029
366A72-0103-1701: RNCC: 3 | RNVC: 2

15 Jul 1993

5340-14-501-7574
Runner

145017574
NO PRIMARY REF14-501-7574: RNCC: 3 | RNVC: 2
NNP5340848425325: RNCC: 5 | RNVC: 9

5 Nov 1997

5340-14-377-1365
Angle Bracket

143771365
10-216-050: RNCC: 3 | RNVC: 2
10216050: RNCC: 5 | RNVC: 2

17 May 1982

5340-14-457-2490
Mounting Plate

144572490
402372A-SG10137-Z2CND17-12: RNCC: 3 | RNVC: 2

20 Aug 1992

5340-14-032-0732
Angle Bracket

140320732
341A58-1012-01: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-501-9368
Cover Strip

145019368
332A08-4698-29: RNCC: 3 | RNVC: 2

19 Nov 1997

5340-14-375-2519
Access Cover

143752519
8740136-001: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-389-4924
Angle Bracket

143894924
365A63-1529-20: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-485-1995
Runner

144851995
J05403-04-0300P072: RNCC: 3 | RNVC: 2
ST159-2M121P123: RNCC: 5 | RNVC: 2
ST159-2M121P123: RNCC: 5 | RNVC: 2

10 Jan 1997

5340-14-201-9717
Bumper

142019717
000736: RNCC: 3 | RNVC: 2
736: RNCC: 5 | RNVC: 2
85-693-8557: RNCC: 6 | RNVC: 9

1 Jan 1962

5340-14-277-8593
Cover Strip

142778593
3160S25-21-725-51: RNCC: 3 | RNVC: 2
3160S25-21-725RU: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-394-4297
Bail Handle

143944297
PO.304-IB: RNCC: 3 | RNVC: 2
304-IB: RNCC: 5 | RNVC: 2
P0304IB: RNCC: 5 | RNVC: 2
PO-304-IB: RNCC: 5 | RNVC: 2

28 Aug 1984

5340-14-304-6951
Tubular Fairlead

143046951
NO PRIMARY REF14-304-6951: RNCC: 3 | RNVC: 2
707296: RNCC: 5 | RNVC: 9
85-672-4780: RNCC: 6 | RNVC: 9

1 Jan 1974

5340-14-458-9173
Mounting Bracket

144589173
100A105662A: RNCC: 3 | RNVC: 2

5 Nov 1992

5340-14-439-6879
Angle Bracket

144396879
16295241: RNCC: 3 | RNVC: 2
16295241: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-552-8832
Mounting Plate

145528832
82034424000: RNCC: 3 | RNVC: 2

10 Feb 2007

5340-14-370-3827
Doorknob

143703827
01020100: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-472-9698
Mounting Plate

144729698
38511774: RNCC: 3 | RNVC: 2
38511774: RNCC: 5 | RNVC: 9

23 Nov 1994

5340-14-523-2438
Retaining Band

145232438
RA1M701516012: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-523-2620
Block Clamp

145232620
RA1M704734543A1: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-503-5866
Mounting Plate

145035866
47029679: RNCC: 3 | RNVC: 2

21 Jan 1998

5340-14-488-2128
Mounting Plate

144882128
20671698: RNCC: 3 | RNVC: 2
20671698: RNCC: 3 | RNVC: 9

23 Apr 1997

5340-14-501-6026
Mounting Bracket

145016026
45673437: RNCC: 3 | RNVC: 2
45673437: RNCC: 5 | RNVC: 9
F300 0T 025 0298: RNCC: 6 | RNVC: 9

5 Nov 1997

5340-14-465-3617
Mounting Bracket

144653617
BAZ9960: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-529-4439
Mounting Bracket

145294439
6501FSC110002: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-503-9427
Mounting Bracket

145039427
8725.065: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-14-467-9678
Mounting Plate

144679678
1068320K00: RNCC: 3 | RNVC: 2

2 Feb 1994

5340-14-277-0669
Retaining Strap

142770669
151179: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-224-9063
Leaf Spring

142249063
0000286502: RNCC: 3 | RNVC: 2
0000286502: RNCC: 5 | RNVC: 9
286502: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-549-5498
Mounting Plate

145495498
EPIPRE E410304: RNCC: 3 | RNVC: 2

13 Apr 2006

5340-14-478-9175
Angle Bracket

144789175
5000954322: RNCC: 3 | RNVC: 2

30 Nov 1995

5340-14-403-9133
Mounting Plate

144039133
1541016: RNCC: 3 | RNVC: 2
1541016: RNCC: 5 | RNVC: 2

11 Sep 1985

5340-14-483-9389
Mounting Bracket

144839389
992343: RNCC: 3 | RNVC: 2
992343: RNCC: 5 | RNVC: 9

10 Oct 1996

5340-14-530-6852
Cover Strip

145306852
T524A2001538: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-462-0557
Bumper

144620557
562356: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-452-7273
Mounting Bracket

144527273
TOP7D225R: RNCC: 3 | RNVC: 2

15 Jan 1992

5340-14-515-6206
Mounting Plate

145156206
32058: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-269-4725
Rod End Clevis

142694725
A181-06: RNCC: 3 | RNVC: 2
A181-06D: RNCC: 3 | RNVC: 9
A181-06D: RNCC: 5 | RNVC: 2
A181-06D: RNCC: 5 | RNVC: 2
A181-06D: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-291-4028
Retaining Strap

142914028
0400420110: RNCC: 3 | RNVC: 2
9560110700: RNCC: 5 | RNVC: 2
53403: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-481-3687
Mounting Bracket

144813687
10283521: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-502-5935
Loop Clamp

145025935
5003079005: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-311-6690
Mounting Plate

143116690
3160S78-04-894: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-381-4015
Mending Plate

143814015
228787: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-522-7071
Retaining Strap

145227071
F00131530: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-14-352-5653
Pipe Hanger

143525653
A11A522320720: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-514-2205
Access Cover

145142205
46013104: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-14-548-7822
Access Cover

145487822
61397243AB: RNCC: 3 | RNVC: 2

9 Feb 2006

5340-14-473-7477
Access Cover

144737477
46060324: RNCC: 3 | RNVC: 2
46060324: RNCC: 5 | RNVC: 9

11 Jan 1995

5340-14-470-0970
Rod End Clevis

144700970
1210001: RNCC: 3 | RNVC: 2
1210001: RNCC: 5 | RNVC: 2

1 Jun 1994

5340-14-450-0019
Anchor Strap

144500019
5516003057: RNCC: 3 | RNVC: 2

18 Sep 1991

5340-14-316-9139
Anchor Strap

143169139
000MA427F30BISREPAC1: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-495-6992
Access Cover

144956992
10372737: RNCC: 3 | RNVC: 2
F300 0T 019 6646: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-361-7289
Anchor Strap

143617289
0833126200: RNCC: 3 | RNVC: 2
0833126200: RNCC: 5 | RNVC: 2
0833126200: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-14-499-6756
Mounting Bracket

144996756
10275761: RNCC: 3 | RNVC: 2
F300 0T 023 6606: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-520-1823
Access Cover

145201823
4625084A: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-429-4709
Access Cover

144294709
12-6053: RNCC: 3 | RNVC: 2

25 Jan 1989

5340-14-505-2375
Access Cover

145052375
15706048: RNCC: 3 | RNVC: 2

16 Mar 1998

5340-14-232-9043
Loop Clamp

142329043
0999908640: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-385-8885
Plug Button

143858885
7700502883: RNCC: 3 | RNVC: 2
7700502883: RNCC: 5 | RNVC: 9

24 Aug 1983

5340-14-524-5260
Blank Panel

145245260
STK00323: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-357-4604
Angle Bracket

143574604
A11A234221402: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-391-6212
Retaining Strap

143916212
20189940: RNCC: 3 | RNVC: 2
20189940: RNCC: 5 | RNVC: 9

21 Mar 1984

5340-14-405-0490
Loop Clamp

144050490
C0110: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-433-6795
Control Rod

144336795
0486-154200: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-349-2302
Loop Clamp

143492302
226844: RNCC: 3 | RNVC: 2
226844: RNCC: 5 | RNVC: 9

22 May 1978

5340-14-547-4757
Mounting Bracket

145474757
S345A5011100: RNCC: 3 | RNVC: 2

14 Oct 2005

5340-14-511-3609
Section Block Clamp

145113609
F704-70-02: RNCC: 3 | RNVC: 2

16 Dec 1998

5340-14-348-6286
Pipe Hanger

143486286
315-010021-000: RNCC: 3 | RNVC: 2
AM174-221A: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-542-5938
Access Cover

145425938
78740A25-45-60: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-14-442-4563
Doorknob

144424563
18014110: RNCC: 3 | RNVC: 2

17 Oct 1990

5340-14-368-4467
Bumper

143684467
063A33-100006-0400: RNCC: 3 | RNVC: 2
063A33-100006-0400: RNCC: 5 | RNVC: 2
35013B: RNCC: 5 | RNVC: 2

20 Feb 1981

5340-14-486-2514
Loop Clamp

144862514
NX6: RNCC: 3 | RNVC: 2
221-10060: RNCC: 5 | RNVC: 2
NX6NR: RNCC: 5 | RNVC: 2

5 Mar 1997

5340-14-334-8684
Retaining Strap

143348684
115-12: RNCC: 3 | RNVC: 2
85-678-1821: RNCC: 6 | RNVC: 9

2 Jun 1976

5340-14-553-1623
Mounting Bracket

145531623
0249860290: RNCC: 3 | RNVC: 2

8 Mar 2007

5340-14-214-2781
Retaining Clip

142142781
10163: RNCC: 3 | RNVC: 2
10163: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-391-6253
Loop Clamp

143916253
20188698: RNCC: 3 | RNVC: 2
20188698: RNCC: 5 | RNVC: 9

21 Mar 1984

5340-14-467-9301
Loop Clamp

144679301
NSA5528-040: RNCC: 1 | RNVC: 2
Z00.N7141387040: RNCC: 3 | RNVC: 2

2 Feb 1994

Load More Results