What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 139 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 139 of 446

5340-14-234-5967
Loop Clamp

142345967
321A41-0152-00: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-298-1029
Retaining Band

142981029
NO PRIMARY REF14-298-1029: RNCC: 3 | RNVC: 2
88696: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-224-0215
Handwheel

142240215
GSM137-001F15DET3AVECB0ULEAS10G: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-341-2003
Loop Clamp

143412003
M3E707-91: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-435-8195
Mounting Bracket

144358195
332A22-1474-00: RNCC: 3 | RNVC: 2

22 Nov 1989

5340-14-471-8851
Mounting Bracket

144718851
315A07-35-002-17: RNCC: 3 | RNVC: 2

21 Sep 1994

5340-14-296-0427
Retaining Strap

142960427
D1054-2067: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-204-7492
Corner Brace

142047492
650-1531: RNCC: 3 | RNVC: 2
846: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-14-256-4325
Pipe Hanger

142564325
C0LLIERAVIS28-6-35CHR0MATE: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-401-1283
Mending Plate

144011283
6814-33207: RNCC: 3 | RNVC: 2

29 May 1985

5340-14-306-0010
Angle Bracket

143060010
A10-50-150-13-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-344-2324
Access Cover

143442324
000704550: RNCC: 3 | RNVC: 2
2704550: RNCC: 5 | RNVC: 2

10 Aug 1977

5340-14-424-6856
Access Cover

144246856
30829160P: RNCC: 3 | RNVC: 2

2 Jun 1988

5340-14-438-2163
Rod End Clevis

144382163
PM1A171166102: RNCC: 3 | RNVC: 2
PM1A171166102: RNCC: 5 | RNVC: 2

7 Mar 1990

5340-14-435-5668
Rod End Clevis

144355668
DA2C286477415: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-428-0724
Access Cover

144280724
000200246352: RNCC: 3 | RNVC: 2

26 Nov 1988

5340-14-517-3480
Access Cover

145173480
29036478: RNCC: 3 | RNVC: 2

6 Dec 1999

5340-14-496-7468
Access Cover

144967468
F00161652: RNCC: 3 | RNVC: 2
F00161652: RNCC: 5 | RNVC: 9
F300 0T 022 0032: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-525-6607
Rod End Clevis

145256607
20 242 030 9870: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-553-7553
Access Cover

145537553
107 021: RNCC: 3 | RNVC: 2
107 021: RNCC: 3 | RNVC: 2

21 May 2007

5340-14-299-2819
Access Cover

142992819
0224200040: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-503-8924
Access Cover

145038924
GFCAA17: RNCC: 3 | RNVC: 2
F0023630: RNCC: 5 | RNVC: 9

4 Feb 1998

5340-14-538-3157
Rod End Clevis

145383157
NGM0010035824298: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-367-4374
Anchor Strap

143674374
15707179: RNCC: 3 | RNVC: 2
15707179: RNCC: 5 | RNVC: 2
15707179: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-399-0610
Anchor Strap

143990610
601954: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-513-1684
Mounting Plate

145131684
466-102: RNCC: 3 | RNVC: 2
466102: RNCC: 5 | RNVC: 9
304 042 004: RNCC: 6 | RNVC: 9
F300 0T 000 2835: RNCC: 6 | RNVC: 9

9 Mar 1999

5340-14-368-3041
Retaining Clip

143683041
6817471-013: RNCC: 3 | RNVC: 2
AZ18436: RNCC: 5 | RNVC: 2

20 Feb 1981

5340-14-302-1217
Mending Plate

143021217
A10-74-107-60-0: RNCC: 3 | RNVC: 2
A10-74-107-60-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-466-6993
Corner Brace

144666993
820851-37: RNCC: 3 | RNVC: 2

24 Nov 1993

5340-14-424-2133
Locking Stay

144242133
8757-03: RNCC: 3 | RNVC: 2
7920041555: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-498-5369
Access Cover

144985369
91975006: RNCC: 3 | RNVC: 2
1311-01-11-075-01-3: RNCC: 5 | RNVC: 9
F300 0T 005 6099: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-410-1805
Strapping

144101805
XC65T4R73-150X0-4: RNCC: 3 | RNVC: 2
G0067: RNCC: 5 | RNVC: 2

16 Jun 1986

5340-14-468-4118
Rod End Clevis

144684118
A10227-01-0000P007: RNCC: 3 | RNVC: 2
411396-001: RNCC: 5 | RNVC: 9

23 Feb 1994

5340-14-444-9065
Clamping Catch

144449065
GP.19-IPA: RNCC: 3 | RNVC: 2
555436: RNCC: 5 | RNVC: 2
GP19IPA: RNCC: 5 | RNVC: 2

28 Jan 1991

5340-14-433-5575
Utility Access Door

144335575
NO PRIMARY REF14-433-5575: RNCC: 3 | RNVC: 2
1436902: RNCC: 5 | RNVC: 2
1436902: RNCC: 5 | RNVC: 9

2 Aug 1989

5340-14-306-0073
Hook Handle

143060073
A10-54-104-34-0: RNCC: 3 | RNVC: 2
A10-54-104-34-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-327-3146
Angle Bracket

143273146
3160S73-62-566: RNCC: 3 | RNVC: 2
85-687-3898: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-456-1165
Loop Clamp

144561165
Y8211156: RNCC: 3 | RNVC: 2

18 Jun 1992

5340-14-238-5318
Retaining Strap

142385318
81115: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-378-9041
Retaining Strap

143789041
0035665183: RNCC: 3 | RNVC: 2
35665183: RNCC: 5 | RNVC: 9
0035665183: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-14-492-4128
Butt Hinge

144924128
5000499609: RNCC: 3 | RNVC: 2
F300 0T 007 5909: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-497-8760
Mounting Bracket

144978760
10259800: RNCC: 3 | RNVC: 2

22 Oct 1997

5340-14-339-9113
Turnbuckle Body

143399113
483496: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-471-9399
Mounting Bracket

144719399
A66825: RNCC: 3 | RNVC: 2

28 Sep 1994

5340-14-475-4061
Mounting Bracket

144754061
TB3010126: RNCC: 3 | RNVC: 2

5 Apr 1995

5340-14-405-2846
Mounting Plate

144052846
40010841: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-411-7855
Loop Clamp

144117855
51200010010: RNCC: 3 | RNVC: 2
300N10: RNCC: 5 | RNVC: 2
14400213F: RNCC: 5 | RNVC: 2
14400213F: RNCC: 5 | RNVC: 2

3 Sep 1986

5340-14-439-6887
Mounting Plate

144396887
16296118: RNCC: 3 | RNVC: 2
16296118: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-460-4892
Retaining Strap

144604892
46748: RNCC: 3 | RNVC: 2
46748: RNCC: 5 | RNVC: 9

27 Jan 1993

5340-14-457-5246
Rim Lock Set

144575246
5000785502: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-373-0980
Angle Bracket

143730980
A11A211105009: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-516-6035
Mounting Bracket

145166035
036189G: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-14-518-5276
Retaining Clip

145185276
5000080239: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-202-5333
Loop Clamp

142025333
51100005029: RNCC: 3 | RNVC: 2
15N29: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-14-554-1100
Loop Clamp

145541100
350 133: RNCC: 3 | RNVC: 2
350 133: RNCC: 3 | RNVC: 2

11 Jun 2007

5340-14-502-4943
Runner

145024943
5000288126: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-494-6107
Mounting Plate

144946107
806 814 301: RNCC: 3 | RNVC: 2
F300 0T 017 5378: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-533-2626
Butt Hinge

145332626
V116609: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-448-8830
Loop Clamp

144488830
35P08: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-14-555-4695
Mounting Plate

145554695
61379579AA: RNCC: 3 | RNVC: 2

20 Nov 2007

5340-14-354-7662
Mending Plate

143547662
60109: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-502-8424
Mounting Bracket

145028424
9R5417: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-485-4744
Loop Clamp

144854744
100-203: RNCC: 3 | RNVC: 2
100-203: RNCC: 5 | RNVC: 9

27 Jan 1997

5340-14-535-9673
Mounting Bracket

145359673
400087: RNCC: 3 | RNVC: 2

2 Jul 2003

5340-14-371-9342
Expansion Plug

143719342
5000041389: RNCC: 3 | RNVC: 2
5000041389: RNCC: 5 | RNVC: 9

5 Aug 1981

5340-14-554-1477
Mounting Bracket

145541477
82049980000: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-466-1756
Mounting Bracket

144661756
162257: RNCC: 3 | RNVC: 2
89169880: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-540-0296
Mounting Bracket

145400296
46234765: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-448-8706
Mounting Bracket

144488706
441916T: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-14-531-1307
Mounting Bracket

145311307
10633361: RNCC: 3 | RNVC: 2

24 Jul 2002

5340-14-505-1163
Bumper

145051163
MB2322F00: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-041-1987
Rod End Clevis

140411987
45-421L33-37: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-356-7427
Rod End Clevis

143567427
3160S73-37-376: RNCC: 3 | RNVC: 2
85-689-6633: RNCC: 6 | RNVC: 9

15 May 1979

5340-14-535-0662
Mounting Bracket

145350662
02000028: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-14-438-5680
Webbing Strap

144385680
4484-028: RNCC: 3 | RNVC: 2

26 Mar 1990

5340-14-421-7534
Pipe Hanger

144217534
045U01-623664L: RNCC: 3 | RNVC: 2
0623664L00: RNCC: 5 | RNVC: 2
89405477: RNCC: 5 | RNVC: 2

27 Jan 1988

5340-14-472-4816
Mounting Plate

144724816
132E455-00: RNCC: 3 | RNVC: 2
132E455-00: RNCC: 5 | RNVC: 9

26 Oct 1994

5340-14-303-4887
Retaining Strap

143034887
502-712-051-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-473-4109
Angle Bracket

144734109
332A76-3149-20: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-446-9979
Pipe Hanger

144469979
0213607090: RNCC: 3 | RNVC: 2
85-694-5335: RNCC: 6 | RNVC: 9

25 Apr 1991

5340-14-443-5579
Synchro Clamp

144435579
CAP230-70-14-021: RNCC: 3 | RNVC: 9

28 Nov 1990

5340-14-316-4642
Loop Clamp

143164642
BN418-501F11G1: RNCC: 3 | RNVC: 2
2200037: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-337-9608
Angle Bracket

143379608
RA160-05145-01: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-489-3940
Mounting Bracket

144893940
M20H5530172-45: RNCC: 3 | RNVC: 2

16 Jul 1997

5340-14-346-3777
Mortise Lock Set

143463777
NO PRIMARY REF14-346-3777: RNCC: 3 | RNVC: 2
SR10: RNCC: 5 | RNVC: 9

12 Dec 1977

5340-14-334-9491
Mounting Plate

143349491
421740: RNCC: 3 | RNVC: 2
419464: RNCC: 5 | RNVC: 2
419464: RNCC: 5 | RNVC: 2
421740: RNCC: 5 | RNVC: 2
419464: RNCC: 5 | RNVC: 9
421740: RNCC: 5 | RNVC: 9
85-692-7846: RNCC: 6 | RNVC: 9

2 Jun 1976

5340-14-569-5746
Coating Plate

145695746
96.16.270.01: RNCC: 3 | RNVC: 2

28 Sep 2011

5340-14-243-9476
Mounting Plate

142439476
105847-002: RNCC: 3 | RNVC: 2
105847-002: RNCC: 5 | RNVC: 2
105847-002: RNCC: 5 | RNVC: 9
105847-2: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-335-7653
Rod End Clevis

143357653
160-88926-04: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-471-6591
Mounting Plate

144716591
002637768P: RNCC: 3 | RNVC: 2
P26377-68: RNCC: 5 | RNVC: 2

7 Sep 1994

5340-14-300-9470
Loop Clamp

143009470
341A91-0027-10: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-398-9973
Bumper

143989973
167140: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-503-0162
Cover Strip

145030162
332A58-1689-20: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-559-2987
Utility Resilient Mount

145592987
10594031: RNCC: 3 | RNVC: 2

17 Dec 2008

5340-14-303-5050
Retaining Clip

143035050
NO PRIMARY REF14-303-5050: RNCC: 3 | RNVC: 2
48-26-10-203: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-482-4917
Clamp Bolt Assembly

144824917
PM1A212505115: RNCC: 3 | RNVC: 2
PM1A212505115: RNCC: 5 | RNVC: 2

11 Jul 1996

5340-14-520-5918
Angle Bracket

145205918
32117160123: RNCC: 3 | RNVC: 2
SDM32117160123: RNCC: 5 | RNVC: 9

24 May 2000

5340-14-519-8296
Exit Bolt

145198296
23.44496NO: RNCC: 3 | RNVC: 2

12 Apr 2000

5340-14-242-2794
Loop Clamp

142422794
977: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-457-5808
Mounting Bracket

144575808
CM14179219: RNCC: 3 | RNVC: 9
89416820: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-436-6308
Rod End Clevis

144366308
DA2C202448511: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-536-1876
Access Cover

145361876
803238140115: RNCC: 3 | RNVC: 2

15 Jul 2003

5340-14-366-4387
Anchor Strap

143664387
0000663715: RNCC: 3 | RNVC: 2
0000663715: RNCC: 5 | RNVC: 9
663715: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-551-2897
Angle Bracket

145512897
RA1M702316011: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-528-4876
Mounting Bracket

145284876
569544: RNCC: 3 | RNVC: 2
569544: RNCC: 3 | RNVC: 2
89532361: RNCC: 5 | RNVC: 2

30 Jan 2002

5340-14-393-0016
Retaining Band

143930016
5000708333: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-14-444-8706
Mending Plate

144448706
39534933: RNCC: 3 | RNVC: 2
39534933: RNCC: 5 | RNVC: 9

23 Jan 1991

5340-14-470-1963
Access Cover

144701963
501382: RNCC: 3 | RNVC: 2

8 Jun 1994

5340-14-554-5542
Plug Button

145545542
0164162980: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-14-335-7664
Rod End Clevis

143357664
160-889009: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-437-9697
Plate Spacer

144379697
5000497513: RNCC: 3 | RNVC: 2

5 Mar 1990

5340-14-457-5800
Pipe Hanger

144575800
5000749282: RNCC: 3 | RNVC: 2
89287840: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-476-0921
Mounting Plate

144760921
222-3018-390: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-454-2142
Mounting Bracket

144542142
15170302: RNCC: 3 | RNVC: 2
15170302: RNCC: 5 | RNVC: 9

26 Mar 1992

5340-14-468-0739
Angle Bracket

144680739
LYN007055212020: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-540-8241
Access Cover

145408241
X1568275: RNCC: 3 | RNVC: 2

23 Apr 2004

5340-14-282-5612
Handwheel

142825612
386213: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-549-9778
Metal Grille

145499778
AL375X47: RNCC: 3 | RNVC: 2

22 May 2006

5340-14-486-5034
Loop Clamp

144865034
NO-PRIMARY REF14-486-5034: RNCC: 3 | RNVC: 2
P02334: RNCC: 5 | RNVC: 2
66936.6: RNCC: 5 | RNVC: 9

21 Mar 1997

5340-14-549-3160
Mounting Bracket

145493160
815-2-71-900: RNCC: 3 | RNVC: 2

21 Mar 2006

5340-14-246-8399
Loop Clamp

142468399
3130S73-76-093: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-376-5940
Anchor Strap

143765940
7551692180: RNCC: 3 | RNVC: 2
75516921: RNCC: 5 | RNVC: 2
524-33-001: RNCC: 5 | RNVC: 2
524-33-001: RNCC: 5 | RNVC: 9
52433001: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-508-7600
Mounting Bracket

145087600
4773122470: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-14-551-1095
Mounting Bracket

145511095
10345720: RNCC: 3 | RNVC: 2

28 Aug 2006

5340-14-449-2009
Angle Bracket

144492009
DHV25814: RNCC: 3 | RNVC: 9

7 Aug 1991

5340-14-528-5208
Cover Strip

145285208
SZ06.250.614: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-341-0815
Angle Bracket

143410815
16397514: RNCC: 3 | RNVC: 2
16397514: RNCC: 3 | RNVC: 9

16 Mar 1977

5340-14-447-3610
Mounting Plate

144473610
16930984: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-535-6462
Clamping Catch

145356462
Y00005550: RNCC: 3 | RNVC: 2
Y00005550: RNCC: 3 | RNVC: 2

11 Jun 2003

5340-14-507-1201
Loop Clamp

145071201
9323991002: RNCC: 3 | RNVC: 2
1632610000: RNCC: 5 | RNVC: 2
1632610008: RNCC: 5 | RNVC: 2

15 Jun 1998

5340-14-554-3314
Mounting Bracket

145543314
82108141000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-542-6355
Mounting Bracket

145426355
S717A2012205: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-14-374-0017
Retaining Strap

143740017
7701458595: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-525-4917
Mounting Plate

145254917
8013473S00: RNCC: 3 | RNVC: 2

6 Jun 2001

5340-14-521-0644
Mounting Bracket

145210644
10504578: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-14-549-8680
Angle Bracket

145498680
2092552: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-521-9598
Mounting Bracket

145219598
TPS1A1014A: RNCC: 3 | RNVC: 2

27 Sep 2000

5340-14-552-8168
Mounting Plate

145528168
82175680000: RNCC: 3 | RNVC: 2
82175600: RNCC: 5 | RNVC: 2

5 Feb 2007

5340-14-278-3852
Bow Handle

142783852
4773-4: RNCC: 3 | RNVC: 2
4773-4: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-504-1787
Mounting Bracket

145041787
1661415M91: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-552-1732
Tie Down Adapter

145521732
252417966: RNCC: 3 | RNVC: 2
PE.352.PN: RNCC: 5 | RNVC: 2

30 Nov 2006

5340-14-550-4657
Angle Bracket

145504657
RA1B701301271N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-461-9929
Angle Bracket

144619929
ST406M75P586: RNCC: 3 | RNVC: 2
BJQM75P586: RNCC: 5 | RNVC: 2

31 Mar 1993

5340-14-298-5668
Retaining Strap

142985668
2-14163: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-494-5943
Access Cover

144945943
802 310 621: RNCC: 3 | RNVC: 2
802 310 621: RNCC: 3 | RNVC: 2

15 Oct 1997

5340-14-360-3999
Rod End Clevis

143603999
12BRASL0NG: RNCC: 3 | RNVC: 2

23 Nov 1979

5340-14-525-6545
Access Cover

145256545
20 242 030 7290: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-539-5475
Cover Strip

145395475
SZ09.251.016: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-431-4143
Bumper

144314143
XMT581363: RNCC: 3 | RNVC: 2

18 Apr 1989

5340-14-480-4868
Access Cover

144804868
GFCAA05: RNCC: 3 | RNVC: 2
F0025300: RNCC: 5 | RNVC: 9

14 Mar 1996

5340-14-350-7292
Retaining Strap

143507292
1030881010: RNCC: 3 | RNVC: 2
1030881010: RNCC: 5 | RNVC: 2

12 Jul 1978

5340-14-512-3913
Compression Cup

145123913
GSM171-114-D11: RNCC: 3 | RNVC: 2

12 Feb 1999

5340-14-361-8606
Loop Clamp

143618606
51213102009: RNCC: 3 | RNVC: 2
20G9: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-14-244-5586
Retaining Strap

142445586
NO PRIMARY REF14-244-5586: RNCC: 3 | RNVC: 2
Z21525: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-473-8401
Mounting Bracket

144738401
332A67-7839-00: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-496-9554
Mounting Bracket

144969554
452-14236-000: RNCC: 3 | RNVC: 2
452-14236-000: RNCC: 5 | RNVC: 9
F300 0T 022 3149: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-525-2394
Access Cover

145252394
4357-0020: RNCC: 3 | RNVC: 2
06810P016002: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-496-9532
Loop Clamp

144969532
452-02798-000: RNCC: 3 | RNVC: 2
452-02798-000: RNCC: 5 | RNVC: 2
F300 0T 022 3120: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-372-2681
Expansion Plug

143722681
E29584-55A: RNCC: 3 | RNVC: 2
BEX55-9B2: RNCC: 5 | RNVC: 2

1 Sep 1981

5340-14-324-6059
Retaining Strap

143246059
5: RNCC: 3 | RNVC: 2
TFMT-2A: RNCC: 6 | RNVC: 9

1 Jan 1975

5340-14-527-9647
Retaining Band

145279647
4E6-10654-000: RNCC: 3 | RNVC: 2
4E6-10654-000: RNCC: 5 | RNVC: 2

5 Dec 2001

5340-14-506-9454
Mounting Bracket

145069454
452-12933-000: RNCC: 3 | RNVC: 2
452-12933-000: RNCC: 5 | RNVC: 2

27 May 1998

5340-14-319-0108
Rod End Clevis

143190108
GDA01-101: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-303-2897
Strap Fastener Loop

143032897
12417-030: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-379-0182
Mending Plate

143790182
1698-001A540: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-427-2163
Mounting Plate

144272163
46AM092-00-0014: RNCC: 3 | RNVC: 2

6 Oct 1988

5340-14-349-1346
Webbing Strap

143491346
1664-005: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-14-554-3760
Bumper

145543760
920A00-02-41: RNCC: 3 | RNVC: 2

27 Jun 2007

5340-14-331-5218
Rod End Clevis

143315218
18-40371-157648: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-411-6378
Mounting Plate

144116378
79100684: RNCC: 3 | RNVC: 2
M539-200516: RNCC: 3 | RNVC: 2
79100684: RNCC: 5 | RNVC: 9

27 Aug 1986

5340-14-534-1363
Mounting Bracket

145341363
332P87-2022-5601: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-460-3529
Mounting Plate

144603529
16380215: RNCC: 3 | RNVC: 2
16380215: RNCC: 5 | RNVC: 9

21 Jan 1993

5340-14-461-2714
Mounting Bracket

144612714
4772920410: RNCC: 3 | RNVC: 2
5046040: RNCC: 5 | RNVC: 9

3 Mar 1993

5340-14-425-5481
Access Cover

144255481
39215854: RNCC: 3 | RNVC: 2

7 Jul 1988

5340-14-472-7329
Access Cover

144727329
46079040: RNCC: 3 | RNVC: 2

9 Nov 1994

5340-14-335-8665
Rod End Clevis

143358665
165602: RNCC: 3 | RNVC: 2
89301826: RNCC: 5 | RNVC: 2

24 Jul 1976

5340-14-481-4541
Mending Plate

144814541
34 11 24: RNCC: 3 | RNVC: 2

8 May 1996

5340-14-281-7842
Angle Bracket

142817842
0077597230: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-386-7322
Access Cover

143867322
20174245: RNCC: 3 | RNVC: 2
20174245: RNCC: 5 | RNVC: 2

24 Aug 1983

5340-14-385-0909
Access Cover

143850909
M4DW1201502602: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-386-4444
Access Cover

143864444
18203: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-414-4575
Rod End Clevis

144144575
DA1D202766005: RNCC: 3 | RNVC: 2

28 Jan 1987

5340-14-338-6561
Anchor Strap

143386561
192416: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-528-5306
Angle Bracket

145285306
45351405: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-381-4778
Butt Hinge

143814778
398002150202: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-552-7225
Loop Clamp

145527225
5000363403: RNCC: 3 | RNVC: 2

25 Jan 2007

5340-14-550-4193
Mounting Bracket

145504193
2714591120: RNCC: 3 | RNVC: 2

20 Jun 2006

5340-14-529-8046
Door Handle

145298046
19215153: RNCC: 3 | RNVC: 2

10 Apr 2002

5340-14-430-3127
Mounting Plate

144303127
29687848: RNCC: 3 | RNVC: 2

15 Mar 1989

5340-14-393-5515
Tubular Fairlead

143935515
970352: RNCC: 3 | RNVC: 2
970352: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-14-356-2864
Bumper

143562864
090531002: RNCC: 3 | RNVC: 2

25 Apr 1979

5340-14-552-4116
Mounting Bracket

145524116
T327A1002204: RNCC: 3 | RNVC: 2

20 Dec 2006

5340-14-385-8804
Synchro Clamp

143858804
54019: RNCC: 3 | RNVC: 9

24 Aug 1983

5340-14-511-9113
Metal Grille

145119113
4SHX778: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-14-393-1307
Retaining Strap

143931307
59536837: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-14-287-4460
Bow Handle

142874460
P0SB2: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-476-7054
Mending Plate

144767054
101160631031: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-14-297-4563
Rim Lock Set

142974563
210GAUCHE: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-396-3077
Runner

143963077
4771502310: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-488-1685
Mounting Plate

144881685
043-07-21A: RNCC: 3 | RNVC: 2

18 Apr 1997

5340-14-522-3171
Mounting Bracket

145223171
10450833: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-14-488-2540
Detent Plunger

144882540
0174041760: RNCC: 3 | RNVC: 2

23 Apr 1997

5340-14-321-7260
Retaining Strap

143217260
A10812: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-540-7004
Mounting Bracket

145407004
38051020: RNCC: 3 | RNVC: 2
00171A: RNCC: 5 | RNVC: 2
4848ZG8613181018: RNCC: 6 | RNVC: 9

20 Apr 2004

5340-14-550-2357
Mounting Bracket

145502357
82128921000: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-14-381-5055
Retaining Strap

143815055
ST406M52P644: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-243-1471
Mounting Plate

142431471
70871554: RNCC: 3 | RNVC: 2
T871554: RNCC: 5 | RNVC: 9
70871554: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-371-6175
Retaining Strap

143716175
650-403-066-0: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-387-5197
Handwheel

143875197
GSM137-007F38AVI0RB: RNCC: 3 | RNVC: 2
MAT137-009F3AVIORB: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-14-530-9378
Mounting Bracket

145309378
711709: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-14-340-3140
Pipe Hanger

143403140
M3C704-087: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-533-6034
Mounting Bracket

145336034
708010S420-01A: RNCC: 3 | RNVC: 2

12 Feb 2003

5340-14-376-5123
Retaining Strap

143765123
NO PRIMARY REF14-376-5123: RNCC: 3 | RNVC: 2
404113675: RNCC: 5 | RNVC: 2
404113675: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-405-4508
Loop Clamp

144054508
514119190085: RNCC: 3 | RNVC: 2
38PT8: RNCC: 5 | RNVC: 2
85-693-1692: RNCC: 6 | RNVC: 9

27 Nov 1985

5340-14-377-9368
Control Rod

143779368
710013-20061: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-358-5511
Bumper

143585511
14176-1342: RNCC: 3 | RNVC: 2
389120: RNCC: 5 | RNVC: 2
1342-99: RNCC: 5 | RNVC: 2

7 Sep 1979

5340-14-485-9125
Loop Clamp

144859125
3130S73-11-001: RNCC: 3 | RNVC: 2

19 Feb 1997

5340-14-232-3891
Bumper

142323891
54051-1530: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-524-6966
Mounting Bracket

145246966
24038-000-00: RNCC: 3 | RNVC: 2

5 Apr 2001

5340-14-522-9591
Synchro Clamp

145229591
ST159-2M561P61: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-14-356-0356
Pipe Hanger

143560356
E4M705-50-961: RNCC: 3 | RNVC: 2
85-689-7287: RNCC: 6 | RNVC: 9

5 Apr 1979

5340-14-374-6588
Runner

143746588
M421-300107: RNCC: 3 | RNVC: 2

30 Jan 1982

5340-14-369-9888
Mending Plate

143699888
M363-04775: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-490-1776
Detent Plunger

144901776
5302357.02 49.00: RNCC: 3 | RNVC: 2
5302357-02 49-00: RNCC: 5 | RNVC: 2
F300 0T 024 2494: RNCC: 6 | RNVC: 9

17 Sep 1997

5340-14-534-1317
Bridge Clamp

145341317
332P69-1326-2101: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-307-5981
Angle Bracket

143075981
E4P831-091: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-429-8980
Threaded Rod End

144298980
1405-256-000A: RNCC: 3 | RNVC: 2

15 Feb 1989

5340-14-495-4273
Mounting Bracket

144954273
M31263-32: RNCC: 3 | RNVC: 2
F300 0T 019 2470: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-476-0925
Angle Bracket

144760925
222-3010-271: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-440-3439
Snap Hook

144403439
13603: RNCC: 3 | RNVC: 2
4220-80INOX: RNCC: 3 | RNVC: 2
04220/080/032: RNCC: 3 | RNVC: 2
2008403: RNCC: 5 | RNVC: 2
4220-80-302: RNCC: 5 | RNVC: 2
4220-80: RNCC: 5 | RNVC: 9
13603: RNCC: 5 | RNVC: 9
4220-80-32: RNCC: 5 | RNVC: 9

11 Jul 1990

5340-14-473-3919
Mounting Bracket

144733919
332A41-4101-20: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-520-4361
Mounting Bracket

145204361
M45AA0101-411: RNCC: 3 | RNVC: 2
M45AA0101-411: RNCC: 5 | RNVC: 9

17 May 2000

5340-14-524-5565
Detent Plunger

145245565
365A25-3484-20: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-386-6162
Bow Handle

143866162
9970-145-230: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-459-9997
Loop Clamp

144599997
CN6-120003: RNCC: 3 | RNVC: 2

7 Jan 1993

5340-14-365-7159
Buckle

143657159
A2002-23: RNCC: 3 | RNVC: 9

8 Oct 1980

5340-14-410-7523
Retaining Strap

144107523
A02358-04-1000P014: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-480-5726
Mounting Plate

144805726
002415530A: RNCC: 3 | RNVC: 2
8702-002: RNCC: 3 | RNVC: 2

14 Mar 1996

5340-14-265-8303
Rod End Connector

142658303
262-10-21871-90: RNCC: 3 | RNVC: 2
262-10-21871-90: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-327-3111
Retaining Strap

143273111
3160S73-37-780: RNCC: 3 | RNVC: 2
85-649-3160: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-382-4932
Retaining Strap

143824932
16762263: RNCC: 3 | RNVC: 2
16762263: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-276-3395
Angle Bracket

142763395
711976: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-351-0077
Mending Plate

143510077
214468: RNCC: 3 | RNVC: 2
188084: RNCC: 5 | RNVC: 2

10 Aug 1978

5340-14-381-2949
Mounting Plate

143812949
601165: RNCC: 3 | RNVC: 2
00601165: RNCC: 5 | RNVC: 2
601160: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-472-1794
Handwheel

144721794
NO PRIMARY REF14-472-1794: RNCC: 3 | RNVC: 2
M4ZS490D3446: RNCC: 5 | RNVC: 2
661 381: RNCC: 5 | RNVC: 2
0661 381: RNCC: 5 | RNVC: 9

12 Oct 1994

5340-14-202-5330
Loop Clamp

142025330
51100005013: RNCC: 3 | RNVC: 2
A0021-15N13: RNCC: 5 | RNVC: 2
15N13: RNCC: 5 | RNVC: 2
A0021-15N13: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-14-458-4383
Runner

144584383
10086378: RNCC: 3 | RNVC: 2

23 Oct 1992

5340-14-507-5113
Butt Hinge

145075113
72-7-4033: RNCC: 3 | RNVC: 2

16 Jul 1998

5340-14-549-8091
Mounting Plate

145498091
2092662-001: RNCC: 3 | RNVC: 2

15 May 2006

5340-14-462-8329
Metal Grille

144628329
CEFL211241005REP7: RNCC: 3 | RNVC: 2
GR-CE/FL 211241005 REP7: RNCC: 5 | RNVC: 2

4 May 1993

5340-14-489-2909
Cover Strip

144892909
NO PRIMARY REF14-489-2909: RNCC: 3 | RNVC: 2
341A25-1002-107: RNCC: 5 | RNVC: 9
91912771: RNCC: 6 | RNVC: 9
F300 0T 004 4150: RNCC: 6 | RNVC: 9

9 Jul 1997

5340-14-301-4317
Bow Handle

143014317
14SD1021: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-498-0220
Mounting Plate

144980220
2411722: RNCC: 3 | RNVC: 2
0241 1722: RNCC: 3 | RNVC: 2
F300 0T 001 5831: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-518-5291
Bow Handle

145185291
5000289476: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-483-8004
Masking Plate

144838004
8001125W00: RNCC: 3 | RNVC: 2

3 Oct 1996

5340-14-379-7640
Control Rod

143797640
BAZ2985: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-461-2493
Angle Bracket

144612493
BC100A130-108: RNCC: 3 | RNVC: 9
0221993W00: RNCC: 5 | RNVC: 2

3 Mar 1993

5340-14-520-0256
Mounting Bracket

145200256
502-515-714-0: RNCC: 3 | RNVC: 2

3 May 2000

5340-14-525-6396
Loop Clamp

145256396
20 239 900 2230: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-508-0359
Mounting Plate

145080359
8900000424: RNCC: 3 | RNVC: 2
9055287: RNCC: 5 | RNVC: 9

26 Aug 1998

5340-14-457-1896
Butt Hinge

144571896
6230205: RNCC: 3 | RNVC: 2
5045229: RNCC: 5 | RNVC: 9

13 Aug 1992

5340-14-500-8252
Mounting Plate

145008252
E64009998124: RNCC: 3 | RNVC: 2
F300 0T 024 8454: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-412-3268
Turnbuckle Body

144123268
36132CC16B044: RNCC: 2 | RNVC: 2
18773-C: RNCC: 3 | RNVC: 2
Z00.N7799233630: RNCC: 5 | RNVC: 2
36132CC16B44: RNCC: 5 | RNVC: 2
DDT16NFS: RNCC: 5 | RNVC: 9
Z00.N7799233628: RNCC: 5 | RNVC: 9

8 Oct 1986

5340-14-554-6817
Mounting Bracket

145546817
MB200414-D: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-14-231-9896
Loop Clamp

142319896
27G2T4-2-8: RNCC: 3 | RNVC: 2
052932: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-514-7504
Webbing Strap

145147504
009806010P: RNCC: 3 | RNVC: 2

15 Jun 1999

5340-14-537-1174
Loop Clamp

145371174
215836-0: RNCC: 3 | RNVC: 2

1 Oct 2003

5340-14-230-6459
Retaining Strap

142306459
DLT002761: RNCC: 3 | RNVC: 2
DLT02761: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-428-3750
Loop Clamp

144283750
3-2607-80A: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-545-7940
Angle Bracket

145457940
716660: RNCC: 3 | RNVC: 2

16 May 2005

5340-14-542-3583
Blank Panel

145423583
452-14178-000: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-14-360-2726
Retaining Strap

143602726
NO PRIMARY REF14-360-2726: RNCC: 3 | RNVC: 2
5825053: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-212-1674
Mounting Bracket

142121674
321A21-0380-20: RNCC: 3 | RNVC: 2
85-691-2224: RNCC: 6 | RNVC: 9

5 Jul 1980

5340-14-411-3430
Mounting Plate

144113430
R4P702-505: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-321-2148
Bail Handle

143212148
3511 180 06841: RNCC: 3 | RNVC: 2
3511-180-06841: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-339-3542
Retaining Strap

143393542
43741-16: RNCC: 3 | RNVC: 2
43741-16: RNCC: 5 | RNVC: 2

18 Jan 1977

5340-14-377-0821
Bumper

143770821
330A58-6036-20: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-446-0444
Mounting Plate

144460444
550-07: RNCC: 3 | RNVC: 2

5 Mar 1991

5340-14-364-7079
Mounting Plate

143647079
M589-14124: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-14-534-1271
Mounting Bracket

145341271
332P65-1181-20: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-439-4717
Retaining Strap

144394717
C58000-379: RNCC: 3 | RNVC: 2

9 May 1990

5340-14-530-6075
Mounting Bracket

145306075
888-381-603-0: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-14-214-3295
Mending Plate

142143295
9970-135-050: RNCC: 3 | RNVC: 2
9970-135-050-00: RNCC: 5 | RNVC: 2

1 Jan 1965

5340-14-476-6813
Buckle

144766813
97200-040POLYACETALNOIR: RNCC: 3 | RNVC: 2
1045296P00: RNCC: 5 | RNVC: 2

28 Jun 1995

5340-14-383-3727
Detent Plunger

143833727
3511 191 32672: RNCC: 3 | RNVC: 2
3511 191 32672: RNCC: 5 | RNVC: 2
3511-191-32672: RNCC: 5 | RNVC: 2

11 Apr 1983

5340-14-431-5897
Mounting Plate

144315897
G990265-06: RNCC: 3 | RNVC: 2

26 Apr 1989

5340-14-473-8387
Mounting Bracket

144738387
332A64-2668-00: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-473-8577
Section Block Clamp

144738577
332A76-1202-20: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-361-7034
Angle Bracket

143617034
E03315-03: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-482-9210
Pipe Hanger

144829210
78732-020-043B: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-304-7000
Mending Plate

143047000
NO PRIMARY REF14-304-7000: RNCC: 3 | RNVC: 2
112018: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-442-2670
Mounting Bracket

144422670
1194-05-03: RNCC: 3 | RNVC: 2

8 Oct 1990

5340-14-505-1829
Retaining Strap

145051829
303-149-801-6: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-455-4547
Snap Hook

144554547
4690-50-25-621: RNCC: 3 | RNVC: 2
85-694-2153: RNCC: 6 | RNVC: 9

21 May 1992

5340-14-458-7667
Mounting Bracket

144587667
MN02/09-51: RNCC: 3 | RNVC: 2
RAR3513: RNCC: 5 | RNVC: 2
MN04/09-51: RNCC: 5 | RNVC: 2

3 Nov 1992

5340-14-338-4888
Runner

143384888
341A25-1168-21: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-375-9765
Leaf Spring

143759765
NO PRIMARY REF14-375-9765: RNCC: 3 | RNVC: 2
464109899: RNCC: 5 | RNVC: 2
464109899: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-390-0111
Lock Bolt

143900111
365A57-1057-20Z: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-468-1780
Angle Bracket

144681780
78704-50-050: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-390-1555
Pipe Hanger

143901555
366A61-2071-00: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-308-0302
Rod End Clevis

143080302
A1-76539: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-388-8810
Surface Bolt

143888810
365A21-3184-01: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-355-1669
Anchor Strap

143551669
AYB531-55: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-434-0381
Mounting Bracket

144340381
538558: RNCC: 3 | RNVC: 2

29 Aug 1989

5340-14-426-4123
Loop Clamp

144264123
3511 180 26911: RNCC: 3 | RNVC: 2
2111 901 03101: RNCC: 5 | RNVC: 2

30 Aug 1988

5340-14-504-0208
Webbing Strap

145040208
34268: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-14-339-1014
Detent Plunger

143391014
SP3-02-05-09: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-397-4142
Webbing Strap

143974142
5100259: RNCC: 3 | RNVC: 2
5000919302: RNCC: 5 | RNVC: 2

14 Dec 1984

5340-14-359-6573
Shimmy Damper

143596573
NO PRIMARY REF14-359-6573: RNCC: 3 | RNVC: 2
949443: RNCC: 5 | RNVC: 9

15 Oct 1979

5340-14-533-2286
Loop Clamp

145332286
D109452: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-430-6998
Support Hook

144306998
PM1A711270039: RNCC: 3 | RNVC: 2
PM1A711270039: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-343-1579
Mending Plate

143431579
4770010640: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-399-1066
Angle Bracket

143991066
640552: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-383-7628
Loop Clamp

143837628
GARD212304036: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-498-3859
Access Cover

144983859
91961130: RNCC: 3 | RNVC: 2
12-01-03-212: RNCC: 5 | RNVC: 9
F300 0T 004 9878: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-467-8433
Mending Plate

144678433
M589-902511: RNCC: 3 | RNVC: 2

27 Jan 1994

5340-14-360-4243
Bumper

143604243
E4M701-10-827: RNCC: 3 | RNVC: 2
85-669-1930: RNCC: 6 | RNVC: 9

23 Nov 1979

5340-14-489-6818
Access Cover

144896818
332A58-5064-0151: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-311-3534
Retaining Strap

143113534
3511-210-00231: RNCC: 3 | RNVC: 2
3511 210 00231: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-286-4230
Buckle

142864230
11611-018: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-519-2964
Cover Strip

145192964
332A23-0621-0301: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-548-1567
Handle Grip

145481567
6220-200Y001A: RNCC: 3 | RNVC: 2

13 Dec 2005

5340-14-488-4041
Anchor Strap

144884041
T2826165: RNCC: 3 | RNVC: 2
P28261-65T: RNCC: 5 | RNVC: 2
T28261-65: RNCC: 5 | RNVC: 2

7 May 1997

5340-14-449-6260
Bumper

144496260
NO PRIMARY REF14-449-6260: RNCC: 3 | RNVC: 2
MR300TGL57: RNCC: 5 | RNVC: 2

28 Aug 1991

5340-14-480-0422
Buckle

144800422
22814: RNCC: 3 | RNVC: 2
197109-020: RNCC: 5 | RNVC: 2

21 Feb 1996

5340-14-382-8222
Angle Bracket

143828222
NO PRIMARY REF14-382-8222: RNCC: 3 | RNVC: 2
RF72IMS1005: RNCC: 5 | RNVC: 2

17 Feb 1983

5340-14-495-4491
Mounting Plate

144954491
R16515-99: RNCC: 3 | RNVC: 2
F300 0T 019 2780: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-406-2086
Mounting Plate

144062086
IF037-249F: RNCC: 3 | RNVC: 9

8 Jan 1986

5340-14-265-1385
Loop Clamp

142651385
55219-306D507ADL: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-453-7023
Mounting Bracket

144537023
T20-13F9-20V2: RNCC: 3 | RNVC: 2

5 Mar 1992

5340-14-317-0780
Plug Button

143170780
821509: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-549-3591
Bumper

145493591
10262 CC: RNCC: 3 | RNVC: 2

27 Mar 2006

5340-14-365-5615
Angle Bracket

143655615
A11A619001121: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-515-4121
Bow Handle

145154121
21670009A: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-526-5831
Access Cover

145265831
DH1F293647: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-424-8110
Access Cover

144248110
567605: RNCC: 3 | RNVC: 2

9 Jun 1988

5340-14-372-8492
Anchor Strap

143728492
19416787: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-379-3132
Control Rod

143793132
15343: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-443-8754
Loop Clamp

144438754
240691200: RNCC: 3 | RNVC: 2
24FE12: RNCC: 5 | RNVC: 2

11 Dec 1990

5340-14-460-1004
Mounting Plate

144601004
784248: RNCC: 3 | RNVC: 2

7 Jan 1993

5340-14-426-1473
Protection Bellows

144261473
16661710: RNCC: 3 | RNVC: 2

4 Aug 1988

5340-14-403-3165
Anchor Strap

144033165
P0201295: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-507-3441
Access Cover

145073441
56090019: RNCC: 3 | RNVC: 2

29 Jun 1998

5340-14-359-1208
Pipe Hanger

143591208
A11A522320030A1: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-519-9465
Mounting Bracket

145199465
009925008P: RNCC: 3 | RNVC: 2

26 Apr 2000

5340-14-397-3625
Angle Bracket

143973625
400575: RNCC: 3 | RNVC: 2
91379505: RNCC: 5 | RNVC: 2
91379505: RNCC: 5 | RNVC: 2

7 Dec 1984

5340-14-310-0152
Angle Bracket

143100152
255013: RNCC: 3 | RNVC: 2
26255013: RNCC: 3 | RNVC: 2
26255013: RNCC: 3 | RNVC: 9
255013: RNCC: 5 | RNVC: 9
85-667-9011: RNCC: 6 | RNVC: 9

1 Jan 1974

5340-14-533-6337
Angle Bracket

145336337
F135197: RNCC: 3 | RNVC: 2

12 Feb 2003

5340-14-350-7454
Rod End Clevis

143507454
22-07-17-1: RNCC: 3 | RNVC: 2
22-07-17-1: RNCC: 5 | RNVC: 2

12 Jul 1978

5340-14-428-6284
Block Clamp

144286284
LB10111556023: RNCC: 3 | RNVC: 2
10111556023: RNCC: 5 | RNVC: 2

8 Dec 1988

5340-14-402-1935
Corner Brace

144021935
7700634388: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-369-2818
Synchro Clamp

143692818
S2360-1CD: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-312-8893
Loop Clamp

143128893
160-79597C: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-478-0001
Retaining Strap

144780001
650-403-070-0: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-14-220-4947
Access Cover

142204947
613-990-037-0: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-361-2693
Retaining Strap

143612693
W14203-16: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-471-5566
Self-Locking Insert

144715566
22918-000-00-R1: RNCC: 3 | RNVC: 2
Z00.N7394262918: RNCC: 5 | RNVC: 2
Z00.N7394262918TBM: RNCC: 5 | RNVC: 9

31 Aug 1994

5340-14-466-5695
Runner

144665695
052-201-02-02: RNCC: 3 | RNVC: 2

16 Nov 1993

5340-14-497-7900
Bridge Clamp

144977900
NO PRIMARY REF14-497-7900: RNCC: 3 | RNVC: 2
NNP5305844554667: RNCC: 5 | RNVC: 9

15 Oct 1997

5340-14-375-9183
Tubular Fairlead

143759183
5000892500: RNCC: 3 | RNVC: 2
5000892500: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-464-9556
Cover Strip

144649556
365A25-0034-28: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-453-8955
Bumper

144538955
E021-200-000: RNCC: 3 | RNVC: 2

12 Mar 1992

5340-14-465-2986
Mounting Plate

144652986
365A81-0280-20: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-504-8382
Caster Wheel

145048382
R1-0810: RNCC: 3 | RNVC: 9
RASR1-0810: RNCC: 5 | RNVC: 9

4 Mar 1998

5340-14-559-8655
Utility Resilient Mount

145598655
CB1400-60CM2: RNCC: 3 | RNVC: 2

26 Feb 2009

5340-14-463-4942
Loop Clamp

144634942
Y21G06P62: RNCC: 3 | RNVC: 2
706A34-509-006: RNCC: 5 | RNVC: 2
F300 0T 014 5512: RNCC: 5 | RNVC: 9

17 Jun 1993

5340-14-472-8640
Angle Bracket

144728640
332A21-1016-8502: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-438-3047
Plug Button

144383047
P3216: RNCC: 3 | RNVC: 2
70015250: RNCC: 3 | RNVC: 2
B139120: RNCC: 3 | RNVC: 2
B139120-CUPROALU: RNCC: 3 | RNVC: 2
P3216/B139120: RNCC: 3 | RNVC: 2
70015250: RNCC: 5 | RNVC: 9
B139120-CUPROALU: RNCC: 5 | RNVC: 9
P3216: RNCC: 5 | RNVC: 9

12 Mar 1990

5340-14-534-1272
Mounting Bracket

145341272
332P65-1902-24: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-350-5772
Cover Strip

143505772
341A25-1000-2901: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-300-4103
Access Door Hinge

143004103
14-104-210-17: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-401-3419
Runner

144013419
2016-63-04: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-286-5144
Butt Hinge

142865144
341A21-1116-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-287-9294
Rod End Clevis

142879294
341A57-1144-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-303-1298
Rod End Clevis

143031298
M3C230-17-02: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-550-2214
Lock Key

145502214
40597-00: RNCC: 3 | RNVC: 2

12 Jun 2006

5340-14-549-6641
Retaining Strap

145496641
MC201-215322-30: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-14-266-8568
Retaining Strap

142668568
U182-00-26: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-386-1206
Mounting Plate

143861206
2500496: RNCC: 3 | RNVC: 2
396947: RNCC: 5 | RNVC: 2

24 Aug 1983

5340-14-489-6093
Mounting Bracket

144896093
0301037660: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-512-5142
Bow Handle

145125142
POIGN00001: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-481-4658
Mounting Bracket

144814658
34 99 00: RNCC: 3 | RNVC: 2

8 May 1996

5340-14-546-3742
Angle Bracket

145463742
5010248155: RNCC: 3 | RNVC: 2

28 Jun 2005

5340-14-422-4550
Angle Bracket

144224550
197367: RNCC: 3 | RNVC: 2

3 Mar 1988

5340-14-431-1897
Bumper

144311897
DLT116060: RNCC: 3 | RNVC: 2

11 Apr 1989

5340-14-468-3947
Butt Hinge

144683947
163139: RNCC: 3 | RNVC: 2
89169985: RNCC: 5 | RNVC: 2

23 Feb 1994

5340-14-377-3818
Loop Clamp

143773818
P602219: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-518-0551
Mounting Plate

145180551
5010118251: RNCC: 3 | RNVC: 2

25 Jan 2000

5340-14-477-2538
Cover Strip

144772538
RA1M291890127: RNCC: 3 | RNVC: 2

2 Aug 1995

5340-14-340-8841
Key Blank

143408841
55X100X820ACB165TRAITE: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-567-8586
Utility Resilient Mount

145678586
CQ0101020201A: RNCC: 3 | RNVC: 2

18 Apr 2011

5340-14-433-7708
Retaining Band

144337708
RP901896: RNCC: 3 | RNVC: 2

9 Aug 1989

5340-14-529-5514
Mounting Bracket

145295514
330AMR-3865-00: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-520-3446
Mounting Bracket

145203446
40147400: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-515-0556
Pipe Hanger

145150556
307-879-302-0: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-14-532-4954
Mounting Plate

145324954
53-11-31: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-14-311-6789
Angle Bracket

143116789
319A88-00-224: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-340-3165
Angle Bracket

143403165
M3C704-171: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-524-2974
Mounting Bracket

145242974
10635640: RNCC: 3 | RNVC: 2

12 Mar 2001

5340-14-442-9922
Mounting Plate

144429922
79122837: RNCC: 3 | RNVC: 2
79122837: RNCC: 5 | RNVC: 9

7 Nov 1990

5340-14-548-5947
Angle Bracket

145485947
RA1A704826291: RNCC: 3 | RNVC: 2

26 Jan 2006

5340-14-321-0458
Expansion Shield

143210458
6150NE0PRENE: RNCC: 3 | RNVC: 2
14NE0: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-446-4896
Mounting Bracket

144464896
293507E: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-14-434-1510
Rim Latch

144341510
16035481: RNCC: 3 | RNVC: 2

6 Sep 1989

5340-14-542-0491
Loop Clamp

145420491
21664127-284: RNCC: 3 | RNVC: 2
502105007034A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-536-6842
Runner

145366842
47114812: RNCC: 3 | RNVC: 2

10 Sep 2003

5340-14-521-2792
Mounting Bracket

145212792
1085913G00: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-542-3412
Angle Bracket

145423412
10657162: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-14-401-6518
Control Rod

144016518
0BEB05-656514K: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-340-8831
Key Blank

143408831
30X45X560ACB165TRAITE: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-505-7226
Bumper

145057226
ME18438AA00: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-551-3363
Pipe Hanger

145513363
RA1M704856001: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-549-4257
Mounting Bracket

145494257
P526923: RNCC: 3 | RNVC: 2

3 Apr 2006

5340-14-448-6085
Retaining Strap

144486085
29410453: RNCC: 3 | RNVC: 2

4 Jul 1991

5340-14-534-3820
Elastic Strap

145343820
28169: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-14-478-8264
Angle Bracket

144788264
29417592: RNCC: 3 | RNVC: 2

22 Nov 1995

5340-14-514-9367
Angle Bracket

145149367
RA1M705954110: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-14-515-3401
Compression Cup

145153401
5023433865: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-482-9729
Pipe Hanger

144829729
PM1A593134020: RNCC: 3 | RNVC: 2
PM1A593134020: RNCC: 5 | RNVC: 2

1 Aug 1996

5340-14-442-9644
Mounting Plate

144429644
703A91-0414-20: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-14-209-1797
Cover Strip

142091797
3130S73-86-085: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-408-3540
Loop Clamp

144083540
LS08-015-06: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-286-5094
Lock Bolt

142865094
341A25-1069-00: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-424-0431
Retaining Strap

144240431
RB10121: RNCC: 3 | RNVC: 2
85-693-1406: RNCC: 6 | RNVC: 9

10 May 1988

5340-14-512-5453
Access Cover

145125453
F294-16-01: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-458-4052
Clamp Bolt Assembly

144584052
S3SD18142-05: RNCC: 3 | RNVC: 2
S3SD18142-05: RNCC: 5 | RNVC: 2

23 Oct 1992

5340-14-364-4179
Corner Brace

143644179
330A58-3036-21: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-412-3608
Retaining Strap

144123608
F8E010055015020: RNCC: 3 | RNVC: 2
85-801-2273: RNCC: 6 | RNVC: 9

13 Oct 1986

5340-14-337-4618
Rod End Clevis

143374618
R0025-818F62: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-427-9615
Turnbuckle Body

144279615
ST159-2M753-32P273: RNCC: 3 | RNVC: 2

24 Nov 1988

5340-14-435-8194
Mounting Bracket

144358194
332A22-1473-21: RNCC: 3 | RNVC: 2

22 Nov 1989

5340-14-473-3870
Lever Bracket

144733870
332A27-1170-00: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-041-6557
Synchro Clamp

140416557
J00397-00-6000P003: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-549-9604
Access Cover

145499604
2092352-001: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-420-5126
Rod End Clevis

144205126
160G262135-12: RNCC: 3 | RNVC: 2

10 Dec 1987

5340-14-439-6787
Retaining Strap

144396787
16291411: RNCC: 3 | RNVC: 2
16291411: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-380-1762
Angle Bracket

143801762
2206-411A511: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-374-0731
Loop Clamp

143740731
330A87-3237-00: RNCC: 3 | RNVC: 2
330A-87-3237-00: RNCC: 5 | RNVC: 2

8 Dec 1981

5340-14-373-9981
Access Cover

143739981
7380-26: RNCC: 3 | RNVC: 9

8 Dec 1981

5340-14-501-1631
Mounting Plate

145011631
014-024-014: RNCC: 3 | RNVC: 2
014.024.014: RNCC: 3 | RNVC: 2
F300 0T 025 2033: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-388-8632
Retaining Strap

143888632
389304: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-230-7292
Handwheel

142307292
GSM137-001F8-3N1: RNCC: 3 | RNVC: 2
GSM137001F8-3N1: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-382-5662
Access Cover

143825662
20116411: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-522-7191
Access Cover

145227191
769984: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-14-531-8602
Mounting Bracket

145318602
23C6513: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-14-332-9396
Retaining Strap

143329396
193518: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-400-0784
Mending Plate

144000784
150559: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-303-2144
Loop Clamp

143032144
H14P: RNCC: 3 | RNVC: 2
0146354W00: RNCC: 5 | RNVC: 2
062-110030: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-525-5701
Padlock

145255701
4SHF307: RNCC: 3 | RNVC: 2
8007897F00: RNCC: 5 | RNVC: 2

14 Jun 2001

5340-14-320-6518
Bail Handle

143206518
14154: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-556-4725
Utility Resilient Mount

145564725
701006: RNCC: 3 | RNVC: 2

11 Mar 2008

5340-14-537-5002
Mounting Bracket

145375002
6501BEH100: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-362-9635
Loop Clamp

143629635
HD12N: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-14-408-4768
Mending Plate

144084768
16427630: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-301-9501
Mending Plate

143019501
A0120BB1AREP9: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-482-5039
Pipe Hanger

144825039
PM1A522194004: RNCC: 3 | RNVC: 2
PM1A522194004: RNCC: 5 | RNVC: 2

11 Jul 1996

5340-14-504-9240
Mounting Plate

145049240
3866.059: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-466-1825
Mounting Bracket

144661825
166063: RNCC: 3 | RNVC: 2
89170166: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-349-2772
Bail Handle

143492772
NO PRIMARY REF14-349-2772: RNCC: 3 | RNVC: 2
11831-4: RNCC: 5 | RNVC: 9

22 May 1978

5340-14-511-6458
Mounting Bracket

145116458
1-625-08-06: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-370-8722
Pipe Hanger

143708722
303-932-002-0: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-389-7727
Bow Handle

143897727
A10-76-009-50-1: RNCC: 3 | RNVC: 2
A10-76-009-50-1: RNCC: 5 | RNVC: 2
85-800-9755: RNCC: 6 | RNVC: 9

20 Dec 1983

5340-14-383-1024
Loop Clamp

143831024
320-120-001-0: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-530-6082
Retaining Strap

145306082
888-361-003-0: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-14-488-6802
Mounting Bracket

144886802
38167188: RNCC: 3 | RNVC: 2
38167188: RNCC: 5 | RNVC: 9

28 May 1997

5340-14-477-0656
Mounting Plate

144770656
55258: RNCC: 3 | RNVC: 2
55258: RNCC: 5 | RNVC: 9
85-694-8102: RNCC: 6 | RNVC: 9

19 Jul 1995

5340-14-446-3942
Angle Bracket

144463942
4086134: RNCC: 3 | RNVC: 2
5084763: RNCC: 5 | RNVC: 2
4086134: RNCC: 5 | RNVC: 9
5084763: RNCC: 5 | RNVC: 9

19 Mar 1991

5340-14-526-4378
Cover Strip

145264378
RA1M228770251N1: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-548-1584
Mounting Bracket

145481584
5430068941: RNCC: 3 | RNVC: 2

13 Dec 2005

5340-14-541-5075
Angle Bracket

145415075
1091108: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-388-7116
Retaining Strap

143887116
T8002HD30AREP17: RNCC: 3 | RNVC: 2

3 Nov 1983

5340-14-447-6200
Mounting Bracket

144476200
P058687: RNCC: 3 | RNVC: 2

29 May 1991

5340-14-412-4170
Angle Bracket

144124170
36418131: RNCC: 3 | RNVC: 2
36418131: RNCC: 5 | RNVC: 2
36418131: RNCC: 5 | RNVC: 2

15 Oct 1986

5340-14-544-9802
Loop Clamp

145449802
5010377553: RNCC: 3 | RNVC: 2

9 Mar 2005

5340-14-526-5201
Mounting Bracket

145265201
D66716: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-311-2967
Compression Cup

143112967
2741-20T380-7: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-534-1372
Mounting Bracket

145341372
332P87-2022-87: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-297-5369
Control Rod

142975369
NO PRIMARY REF14-297-5369: RNCC: 3 | RNVC: 2
12-43-13-108: RNCC: 5 | RNVC: 9
12-43-13-108A: RNCC: 5 | RNVC: 9
42-31-13-072: RNCC: 5 | RNVC: 9
42-43-13-108: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-498-7405
Mounting Plate

144987405
NO PRIMARY REF14-498-7405: RNCC: 3 | RNVC: 2
12-13-05-115: RNCC: 5 | RNVC: 9
121305115: RNCC: 5 | RNVC: 9
F300 0T 008 2353: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-371-5518
Rod End Clevis

143715518
365A91-4240-21: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-396-2548
Handwheel

143962548
7199-310: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-236-9970
Bail Handle

142369970
NO PRIMARY REF14-236-9970: RNCC: 3 | RNVC: 2
37861: RNCC: 5 | RNVC: 9
66539: RNCC: 5 | RNVC: 9
062066539: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-439-0830
Cable Retractor

144390830
NO PRIMARY REF14-439-0830: RNCC: 3 | RNVC: 2
EL045S18TK1: RNCC: 5 | RNVC: 9

25 Apr 1990

5340-14-486-6102
Butt Hinge

144866102
A10-12-728-16-2: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-14-502-9700
Section Block Clamp

145029700
307-966-102-0: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-353-1210
Snap Hook

143531210
RC55-99: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-366-9439
Angle Bracket

143669439
069-03-108: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-464-0947
Angle Bracket

144640947
366A61-2109-22: RNCC: 3 | RNVC: 2

15 Jul 1993

5340-14-305-0646
Support Hook

143050646
M3E704-139: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-315-0353
Mounting Plate

143150353
NO PRIMARY REF14-315-0353: RNCC: 3 | RNVC: 2
64H0016DET39: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-364-0635
Access Cover

143640635
050A57-520586F: RNCC: 3 | RNVC: 2
0520586F00: RNCC: 5 | RNVC: 2

7 Aug 1980

5340-14-549-5099
Butt Hinge

145495099
MC201-925140-30: RNCC: 3 | RNVC: 2

11 Apr 2006

5340-14-477-7493
Strapping

144777493
BANCERCM10-030: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-14-422-1946
Anchor Strap

144221946
075162-01: RNCC: 3 | RNVC: 9

24 Feb 1988

5340-14-452-8383
Loop Clamp

144528383
514040: RNCC: 3 | RNVC: 2
34528H011-91: RNCC: 5 | RNVC: 9

22 Jan 1992

5340-14-473-8598
Mounting Bracket

144738598
332A87-0233-00: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-467-3796
Butt Hinge

144673796
350A21-1217-01: RNCC: 3 | RNVC: 2

10 Jan 1994

5340-14-393-1244
Retaining Strap

143931244
02135005600: RNCC: 3 | RNVC: 2
021350056: RNCC: 5 | RNVC: 2
431505-00: RNCC: 5 | RNVC: 2

12 Apr 1984

5340-14-460-1827
Mounting Bracket

144601827
LN214-001FIA06L03: RNCC: 3 | RNVC: 2
RAB0245: RNCC: 5 | RNVC: 2

14 Jan 1993

5340-14-425-7322
Loop Clamp

144257322
51113105060: RNCC: 3 | RNVC: 2
25G60: RNCC: 5 | RNVC: 2
ASNA0021-25G60: RNCC: 5 | RNVC: 2
ASNA0021-25G60: RNCC: 5 | RNVC: 2

21 Jul 1988

Load More Results